docProduct Catalog (PDF Download)
download 
Report Transcription
Product Catalog (PDF Download)
T E A K P R O D U C T S F O R H O M E • P A T I O • B O A T • R V Welcome to Whitecap Teak TABLE OF CONTENTS 1 Teak Cleaning 2Deck 4 Teak Swim Platforms 5 Poly Swim Platforms Care and Maintenance of Teak 6 Table Tops Teak does not require any type of finish 7 Cockpit Tables to maintain long life or preserve it’s surface. When left unfinished, teak 8Kitchen/Galley weathers in the elements to a silver 12Bathroom/Head grey color. It can be easily cleaned using a soft brush and some soap 14 Devise Storage and water. Some prefer this look for 14 Name Plates exterior applications. To maintain teak’s rich luster, clean 15Storage often with a damp cloth and apply 18 Molding Whitecap Golden Teak Oil. To restore weathered teak to a rich luster, clean 20Trim with Whitecap teak maintenance 21Covers products. Our 3-Step System cleans, brightens and preserves teak wood. 21 Trim Rings These products are ideal for use on teak 22 Louvered Inserts furniture and marine teak accessories. Step 1, cleaning. Clean dirty and/or 23 Cabinet Doors stained wood with Whitecap Premium 23 Cabinet Drawers Teak Cleaner. Step 2, brightening. To bring out the natural wood grain 24 Grate Material and wood color treat with Whitecap 25Lumber Premium Teak Brightener. Step 3, preserving. To preserve, seal and protect 25Louvered cleaned teak, apply Whitecap Premium Door Material Golden Teak Oil which is custom formulated with special natural oils 26 Racks that protect and beautify teak wood. To 27 Drink Racks maintain the rich luster of teak, apply Whitecap Golden Teak Oil annually or 30Tables more often in harsher environments. 32Seating Avoid chemical cleaners. Weathered Teak Before Treatment PartDescription TK-81000 16 oz. Premium Teak Cleaner TK-81000C*• Cleans weathered & stained teak without hard rubbing • Will not harm fiberglass or painted surfaces • Easy to use Teak Brightener PartDescription TK-91000 16 oz. Premium Teak Brightener TK-91000C*• Brightens and enhances the natural wood grain and color • Easy to use, no hard rubbing • Will not harm fiberglass or painted surfaces Teak Oil PartDescription TK-71000 16 oz. Premium Golden Teak Oil TK-71000C*• Preserves, seals and provides a protective finish to teak wood • Penetrates deep into the teak for ultimate protection • Dries quickly * Packaged for sale in Canada Step 1 CLEAN Step 2 BRIGHTEN Step 3 PRESERVE e finest teak lum be f th r eo aged forests. man Ma d rom aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo luster. No other species or origins of wood are used in our products, nor are veneers. All our products are made of solid teak. d by the governm tifie en cer Whitecap teak is produced in the same factory in Thailand that has been supplying the North American marine industry for over 40 years. Whitecap teak accessories are produced from the finest teak lumber certified by the government of Thailand as harvested from managed forests. Teak is one of the world’s most desired hardwoods. Teak’s naturally high oil content makes it incredibly durable. Teak resists warping, rotting, termites and other insects. Teak will last for decades. Teak can withstand the most extreme weather conditions including salt, sun, snow and rain. Not only is teak durable, it’s beautiful to see and touch. Its intricate grain patterns and color variations make each piece unique unto it’s self. There are no other hardwoods that can match the soft, warm, silky feel of teak that comes from the rich oil contained in the wood. Whitecap teak products are made from kiln dried, fully aged teak wood. To ensure strength and durability, each of our handcrafted products uses traditional assembly techniques, such as dovetail and mortice & tenon joints. All screw fittings are countersunk and plugged. Only high-quality waterproof adhesive is used. Each item is sanded and finished by hand to a rich elegant Teak Cleaner Whitecap is pleased to announce the addition three new Whitecap teak maintanence products. Our 3-Step System cleans, brightens and preserves teak wood. These products are ideal for use on teak furniture and marine teak accessories. STEP 1 CLEANING Clean dirty and/or stained wood with Whitecap Premium Teak Cleaner. STEP 2 BRIGHTENING To bring out the natural wood grain and wood color treat with Whitecap Premium Teak Brightener. STEP 3 PRESERVING To preserve, seal and protect cleaned teak, apply Whitecap Premium Golden Teak Oil which is custom formulated with special natural oils that protect and beautify teak wood. To maintain the rich luster of teak, apply Whitecap Golden Teak Oil at the first sign of weathering. as ailand harveste df f Th to About Our Teak Products Teak Cleaning Teak Packaging Whitecap is the leader in high quality teak marine deck and cabin accessories. All of our products are handcrafted from the finest teak wood certified by the government of Thailand as harvested from sustainable managed forests. In an effort to add even more value to our exceptional products we are packaging some of our more popular items in new shrink sealed packaging with full color labeling. Our new colorful packaging offers added protection, shelf appeal and provides more product information to the consumer. 1 as ailand harveste df f Th to Deck Deck Teak Name Board Teak Winch Pads Part 62720 Part Description Base Diameter Top Diameter Height 60164* 5-1/4” 4-1/4” 1-1/4” 60166* 7-1/8” 6-3/8” 1-1/4” 60169 8-3/4” 7-3/4” 1-1/2” 60464 4-3/8” 3-1/2” 1-1/4” 60465 4-5/8” 4” 1-1/4” 60466 5-3/8” 4-1/2” 1-1/4” 60467 6-1/4” 5-1/4” 1-1/4” 60468 6-3/4” 6” 1-1/4” 60469 7-7/8” 7” 1-1/8” 60470 3” 2-1/4” 1-1/8” 60471 4-3/8” 3-7/8” 1-1/8” 60473 5-1/2” 4-7/8” 1-1/8” 60474 6-1/8” 5-5/8” 1-1/4” 60475 6-3/4” 6” 1-1/4” 60476 7-1/4” 6-1/2” 1-1/4” * Full color retail packaging Description 30” W x 5-1/8” H x 5/8” Thick • Solid teak Dorade Box Waterproof Venting System Part 60310 Description 16” L x 7” W x 5-3/8” H • Solid teak Teak Outboard Mounting Bracket Part 60326 Canted Winch Pad Description 6-7/8” W x 6-5/8” L x 1-1/2” Thick • For motors up to 12 h.p. only • Fits 7/8” or 1” railings •Full color retail packaging Top Diameter Height Base Diameter Teak Cooler/Box Chocks Part 60329 Top Diameter Description Chock measures: 4-1/2” W x 4-1/2” D x 5/8” Thick • Set of four Angle Angle 0° 0° 15° 0° 0° 0° 0° 0° 0° 15° 15° 15° 15° 15° 15° Height Base Diameter Teak Wedge/Door Stop Part Description 60478 1-3/4” W x 4-5/8” L 1-1/4” Thick on high end, 3/8” on low end Teak Deck Steps Size Large Medium Small e finest teak lum be f th r eo aged forests. man Ma d rom Description 15” W x 6” D x 1/2” Thick 11-1/2” W x 4-1/2” D x 1/2” Thick 8-3/4” W x 3-1/2” D x 1/2” Thick d by the governm tifie en cer Part 60502 60504 60506 as ailand harveste df f Th to Teak Swim Platforms d by the governm tifie en cer aged forests. man Ma d rom e finest teak lum be f th r eo 60924 as ailand harveste df f Th to Platform Top Part 60924 60972-OEM 60980-OEM 60990-OEM Description 24” - 24” W (back), 22” W (front) 18” D 72” - 72” W (back), 62-3/4” W (front) 80” - 80” W (back), 70-3/4” W (front) 90” - 90” W (back), 80” W (front) Teak Flooring Panel PartDescription 60870 •Sheet size: 47-1/4” Wide x 78-3/4” Long x 1/4” Thick. Teak strips are 1-3/4” wide, black Sikaflex strip is approximately 1/8” wide •Solid teak strips are bonded together with UV resistant polyurethane based Sikaflex joint sealing compound. This flexible material is specially formulated for caulking joints in traditional marine decking. Platform Underside •Large platforms are 22” deep and 1-5/16” thick Swim Platform Mounting Brackets •Built with waterproof resorcinol glue and screws • All holes are countersunk and plugged •6” wide back plank allows platforms to be custom fitted to most transoms 304 Stainless Steel 2 Part Description 60993 7” H x 14” D x 1-1/2” W • Use on 60924, 65924 60995 9” H x 17” D x 1-1/2” W • Use on 60972, 60980, 65984, 65972 60996 14” H x 21” D x 1-1/2” W • Use on 60990 • Brackets are 102º, or 12º off of 90º 3 Teak Swim Platforms Poly Swim Platforms Teak Swim Platform w/Mounting Hardware for Boats w/ Outboard Motors White Poly Swim Platform w/Mounting Hardware for Boats w/ Outboard Motors Part 60900 Part 67900 Description • 304 stainless steel hardware • Assembly required Teak Swim Platform w/Ladder and Mounting Hardware for Boats w/Outboard Motors Part 60902 Description • 304 stainless steel hardware • Assembly required Description • 304 stainless steel hardware • Assembly required White Poly Swim Platform w/Ladder and Mounting Hardware for Boats w/Outboard Motors Platform Dimensions: 18” W (back), 17” W (front) x 15” D x 1-5/16” Thick Part 67902 Description • 304 stainless steel hardware • Assembly required aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo as ailand harveste df f Th to White Poly Swim Platform w/Mounting Hardware for Boats w/ Inboard/Outboard Motors Teak Swim Platform w/Mounting Hardware for Boats w/ Inboard/Outboard Motors Part 60901 Part 67901 Description • 304 stainless steel hardware • Assembly required White Poly Swim Platform w/Ladder and Mounting Hardware for Boats w/ Inboard/Outboard Motors Teak Swim Platform w/Ladder and Mounting Hardware for Boats w/ Inboard/Outboard Motors Part 60903 Description • 304 stainless steel hardware • Assembly required Teak Ladder Step Part 60944 Description • 6” W x 1-7/8” D x 7/8” Thick Teak Swim Platform - 18” Part 60918 4 Description • 304 stainless steel hardware • Assembly required Replacement Stainless Steel Rails For Swim Platforms Available Separately Platform Dimensions: 18” W (back), 17” W (front) x 15” D x 3/4” Thick Part 67903 Description • 304 stainless steel hardware • Assembly required Gudgeon PartPin Size 6208 5/16” 4-5/8” L x 1-1/4” H Fastener Material #10 316 SS Description • 18” W (back), 17” W (front) x 15” D x 1-5/16” Thick 5 Table Tops Cockpit Tables Solid Teak Pedestal Table Tops Cockpit Table w/ Folding Leaves and Four Drinkholder • Solid teak table tops with finished, raised lip edge • Mounts to standard pedestal table hardware • Great lightweight, durable, portable table • User can add 3-7/8” diameter drinkholder cutouts PartDescription 61392 • Brass hinges/stainless steel hardware • Tabletop Dimensions: Closed: 16” W x 24” L Open: 32” W x 24” L • Drinkholder holds four glasses or two glasses and pair of binoculars • Fold-down support leg: 30-1/2” long • Installs on 7/8” or 1” diameter tubing pedestal steering guards with included nylon steering pedestal clamps (PN 61395) • Installs without drilling pedestal guard • 2 - brass barrel bolts (PN S-585B ) included, to secure table leaves when the table is in the folded position • Unit can be removed for storage by removing clamps • Natural finish • Some assembly required Teak Rectangle Table Top PartDescription 61398 •16” W x 28” L x 1-1/8” Thick • Solid teak Teak Oval Table Top Add Drinkholders To Teak Table Tops with Our Easy to Install Stainless Steel Flush Mounted Drinkholders! LED Illuminated Flush Drinkholder Part Cut-Out O.D. Depth Material Color S-3511B 3-3/4” 4 -1/4” 2-1/4-3-1/8” 304 SS Blue S-3511R 3-3/4” 4 -1/4” 2-1/4-3-1/8” 304 SS Red • Includes mounting gasket, pad & 3/8” drain tube • Fits cans, bottles & can coolers • 12V operation, includes 6” wire leads Flush Drinkholder Part Cut-OutO.D. Depth Material S-3511 3 7/8” 4 3/8” 2-1/4-3-1/8” 304 SS • Includes mounting gasket, pad & 3/8” drain tube • Fits cans, bottles & can coolers aged forests. man Ma d rom aged forests. man Ma d rom as ailand harveste df f Th to PartDescription 61397 • 24” Diameter x 1-1/8” Thick • Solid teak 6 e finest teak lum be f th r eo Unique Leaf Support d by the governm tifie en cer Teak Round Table Top d by the governm tifie en cer e finest teak lum be f th r eo as ailand harveste df f Th to PartDescription 61399 • 18” W x 30” L x 1-1/8” Thick 61400 • 16” W x 30” L x 1-1/8” Thick • Solid teak The steering post cannot protrude beyond the front of the pedestal guard. If so, the table will not properly attach to the guard due to interference from the steering post. Four Drinkholder w/ Removable Cockpit Table PartDescription 61394 • Table Top Dimensions: 16” W x 24” L • Drinkholder holds four glasses or two glasses and pair of binoculars • Drinkholders can be used without the table • Installs without drilling pedestal guard • In the down position, tabletop hangs on hooks and secures to the pedestal guard with clips • Installs on 7/8” or 1” diameter tubing pedestal steering guards with included nylon steering pedestal clamps (PN 61395) • Tabletop is easy to remove, can be used as a tray or stowed The steering post cannot protrude beyond the front of the pedestal guard. If so, the table will not properly attach to the guard due to interference from the steering post. Steering Pedestal Clamp PartDescription 61395 • Use to mount cockpit table (2-required) • Fits 7/8” and 1” pedestal guard tubing 7 Kitchen/Galley Kitchen/Galley Dish/Cup/Paper Towel Rack Bar Rack PartDescription 62402 • Holds 4 plates up to 11” diameter • Holds standard paper towel roll • Spring-loaded bar • 22-1/4” W x 16” H x 4-1/8” D PartDescription 62550 • Holds 4 glasses, 2 bottles, storage for bar accessories • 17-3/4” W x 4-1/2” H x 8-1/4” D Dish/Cup Holder PartDescription 62418 • Oiled finish • 18-3/4” L x 12-1/4” W x 1-7/8” H as ailand harveste df f Th to Cutting Board d by the governm tifie en cer e finest teak lum be f th r eo aged forests. man Ma d rom PartDescription 62406 • Holds 4 each of plates and cups • 19-3/4” W x 11-1/2” H x 4-1/4” D Serving Tray PartDescription 62416 • Solid teak • Protective non-skid feet • 11” L x 8” W Dish/Cup/Utensil Holder PartDescription 62404 • Holds cups, plates, and flatware • 16-1/4” W x 9-7/8” H x 7-1/8” D Large 8” Square Trivet PartDescription 62421 • Oiled finish Small 6” Square Trivet aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo PartDescription 62420 • Oiled Finish •Full color retail packaging as ailand harveste df f Th to Cutlery Rack PartDescription 62414 • 5-7/8” W x 8-5/16” H x 3-3/16” D •Three silverware sections and six knife slots Stay-Put Napkin Holder PartDescription 62434 • Holds regular and cocktail size napkins • 7-3/8” W x 2-3/4” H x 6-3/4” D • Prevent napkins from blowing away • Oiled finish Traditional Napkin Holder Modular Cup Rack PartDescription 62408 • Holds 3-4 cups • 4-1/4” W x 10-3/8” H x 4-1/4” D 8 PartDescription 62432 • Standing unit holds any size napkin • 8-1/4” W x 5-1/2” H x 3-7/8” D • Oiled finish Napkin Holder PartDescription 62433 • 5-7/8” W x 3” H x 1-7/8” D • Oiled finish 9 Kitchen/Galley Kitchen/Galley Wine Bottle Rack Two-Tier Spice Rack PartDescription 62618 • Holds 750 ml wine bottle • 3-7/8” W x 5-1/2” H x 3-3/4” D • Bulkhead mount PartDescription 62440 • Holds up to 6 standard spice bottles on each self • Shelves are 3” deep • 13-1/8” W x 10-1/8” H x 4-1/4” D aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo Small Spice Rack PartDescription 62436 • Holds up to 9 spice bottles • 14” W x 2-7/8” H x 4” D • Full color retail packaging as ailand harveste df f Th to Two-Bottle Rack PartDescription 62620 • Holds two 750 ml wine bottles • 8-3/8” W x 5-1/2” H x 3-3/4” D • Bulkhead mount Large Spice Rack PartDescription 62438 • Holds up to 15 spice bottles • 23-3/8” W x 2-7/8” H x 4” D •Full color retail packaging aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo as ailand harveste df f Th to Overhead Wineglass Rack PartDescription 62425 • Holds up to 12 large wine glasses • 16-5/8” W x 11-3/4” D x 7/8” Thick • Space-saving overhead mount •Full color retail packaging Wineglass Rack with Shelf PartDescription 62426 • Holds up to 8 small wine glasses • 17-1/2” W x 2-1/2” H x 5” D • Bulkhead mount •Full color retail packaging Stand-Up Paper Towel Holder PartDescription 62444 • 13-1/2” H x 5-7/8” Diameter • Fits standard or jumbo roll • Oiled finish Spice Rack with Paper Towel Holder PartDescription 62446 • 13-1/16” W x 10” H x 3-3/4” D • Holds standard paper towel roll • Spring-loaded bar Wall-Mount Paper Towel Holder PartDescription 62442 • Takes standard or jumbo roll • Spring-loaded bar • 12-1/4” W x 1-7/8” H x 4-3/8” D •Full color retail packaging 10 11 Bath/Head Bath/Head Porthole Mirror Towel Bar PartDescription 62540 • Teak frame with brass studs • 10-1/2” Diameter • Oiled finish PartDescription 62330 •14” W x 1” H x 2-1/2” D • Includes mounting hardware Long Towel Bar PartDescription 62332 • 23” W x 1” H x 2-1/2” D • Includes mounting hardware Towel Ring Rectangular Mirror PartDescription 62544 • 11” W x 15” H • Oiled finish PartDescription 62338 • 6” W x 9-1/2” H x 2” D Towel Rack PartDescription 62334 • 16” W x 1-7/8” H x 3” D Long Towel Rack PartDescription 62336 • 22” W x 1-7/8” H x 3” D Medicine Chest PartDescription 62354 • 11” W x 15” H x 4-1/2” D • Can be mounted to open left or right • Adjustable shelves • Glass mirror •Full color retail packaging aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo as ailand harveste df f Th to Tissue Box Holder PartDescription 62344 • Use with 4-3/8” square tissue boxes • 5-1/4” W x 5-5/8” H x 5-1/4” D Toothbrush Holder PartDescription 62310 • 5-3/4” W x 1-7/8” D • Holds 4 standard toothbrushes Glass & Toothbrush Holder PartDescription 62312 • 4-3/4” W x 1-1/16” H x 3-1/4” D • Holds 4 standard toothbrushes Oval Soap Dish PartDescription 62315 • Slotted base • 7-1/8” W x 1-3/8” H x 3-9/16” D Soap Dish PartDescription 62314 • Includes clear plastic insert • 4-3/4” W x 1-9/16” H x 3-1/4” D aged forests. man Ma d rom PartDescription 62322 • Spring-loaded bar • 5-1/2” W x 1-7/8” H x 3-3/4” D 12 Liquid Soap Holder as ailand harveste df f Th to Toilet Tissue Rack d by the governm tifie en cer e finest teak lum be f th r eo PartDescription 62316 • Holds 10-1/2 oz. oval bottle • 3-3/4” W x 4-3/8” H x 2-3/4” D 13 Devise Storage iPad® Rack Storage PartDescription 65855 • Outside: 8” W x 9-5/8” H x 1-1/16” D •Inside: 2-1/2” W x 9-5/16” H x 9/16” D •Charging cable cut-out • Can be mounted horizontally or vertically •Pre-drilled mounting holes •Full color retail packaging Hardcover Book Rack iPhone® Rack VHS Cassette/Paperback Book Rack PartDescription 63272 • Outside: 3” W x 4-3/16” H x 1” D •Inside: 2-1/2” W x 4” H x 1/2” D •Charging cable cut-out in bottom • Holds phone with or without protective case •Pre-drilled mounting holes •Full color retail packaging PartDescription 62514 • 15” W x 6” H x 5-1/4” D • Holds 13 VHS cassettes • Holds standard size paperback books Adjustable Tablet Rack CD Rack PartDescription 65856 • Outside: 5-3/4” W x 7-5/16” H x 1” D •Inside: 5-1/4” W x 7” H x 1/2” D •Charging cable cut-out • Expands to hold various tablet sizes • Can be mounted horizontally or vertically •Pre-drilled mounting holes •Full color retail packaging PartDescription 62520 • 8-5/8” W x 5-5/8” H x 5-1/4” D • Holds 16 jewel case CDs PartDescription 62512 • 15” W x 7-1/4” H x 7-1/4” D • Doubles as utility shelf Paperback Book aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo as ailand harveste df f Th to No Smoking Name Plate PartDescription 62672 • 3-7/8” W x 1” H x 1/4” Thick • Oiled finish PartDescription 62674 • 3-7/8” W x 1” H x 1/4” Thick • Oiled finish 14 Audio Cassette Rack PartDescription 62522 • 15” W x 4-1/4” H x 3-1/2” D • Holds 21 audio cassette tapes e finest teak lum be f th r eo d by the governm tifie en cer Toilet Name Plate PartDescription 62524 • 5-7/8” W x 4-1/8” H x 3-7/8” D • Inside dimensions: 4-5/8” W x 2-3/4” D aged forests. man Ma d rom PartDescription 62670 • 3-7/8” W x 1” H x 1/4” Thick • Oiled finish Mini Rack as ailand harveste df f Th to Captain Name Plate 15 Storage Storage Stow Rack Grate Front Magazine Rack PartDescription 62526 • 13-1/2” W x 1-7/8” H x 3” D • A multi-purpose holder for wallets, keys, etc. • Can also be used as a shower caddy PartDescription 62502 • Wall mount • 10-1/2” W x 11-1/4” H x 4-3/8” D Utility Shelf Magazine/Utility Rack PartDescription 62554 • 21” W x 5” H x 6” D • Wall-mount •Full color retail packaging PartDescription 62504 • 9-3/4” W x 9-1/2” H x 4-1/8” D • Wall-mount or free-standing • Use to store plates, magazines, navigation books or charts •Full color retail packaging aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo as ailand harveste df f Th to Chart Caddy PartDescription 62534 • Two-piece set, surface mount • 24” H x 3-7/8” D x 1/2” Thick Magazine Rack PartDescription 62506 •Complete with rear mounting bar •14-3/4” W x 12” H x 4-1/4” D •Bulkhead mount •Full color retail packaging Navigation Tray PartDescription 62530 • 17-1/2” W x 3-7/16” H x 2-3/4” D Double-Wide Magazine Rack PartDescription 62508 •18-3/8” W x 9-1/2” H x 4” D •Wall-mount or stand alone •Extra-large capacity, displays magazines side-by-side •Large enough for charts and navigation books •Full color retail packaging Pencil Holder PartDescription 62536 • 4-3/4” W x 3-1/4”H x 1-1/8” D •Full color retail packaging Utility Hook Navigation Rack PartDescription 62560 •7” H x 3-3/4” D x 7/8” Thick •Sturdy hook holds clothing, hats or gear PartDescription 62532 • 16-3/4” W x 5” H x 3-1/2” D aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo as ailand harveste df f Th to 16 17 Molding Molding 7 PartDescription 60821 1/2” Track Straight Length Bulkhead Molding • 5 ft. length 8 5 13 PartDescription 60831 Straight Length Rail Molding • 5 ft. length 16 1 58 8 7 2 1 PartDescription 60823 1/2” Track Outside Corner Bulkhead Molding • Inside radius: 1-3/4 • Outside radius: 2-1/4” PartDescription 60822 1/2” Track Inside Corner Bulkhead Molding • Inside radius: 1-3/4” • Outside radius: 2-1/4” e finest teak lum be f th r eo 4 1 Cap Molding 8 as ailand harveste df f Th to Pin Rails d by the governm tifie en cer 1 Rail Molding aged forests. man Ma d rom 1/2” Track Bulkhead Molding 2 PartDescription 60833 Outside Corner Rail Molding • Inside radius: 2” • Outside radius: 2-1/2” PartDescription 60832 Inside Corner Rail Molding • Inside radius: 1-3/4” • Outside radius: 2-1/4” L-Type Pin Rail PartDescription 60703 • 2-9/16” H x 7/8” D x 5’ L • 5 ft. length Standard Pin Rail PartDescription 60705 • 3-9/16” H x 7/8” D x 5’ L • 5 ft. length C A B D “L” Molding A B C PartDescription 60825 3/4” Track Straight Length Bulkhead Molding • 5 ft. length 1 3 16 5 1 8 13 7 8 4 2 PartDescription 60837 Outside Corner Edge Molding • Inside radius: 2” • Outside radius: 2-1/2” PartDescription 60836 Inside Corner Edge Molding • Inside radius: 1-3/4” • Outside radius: 2-1/4” Bunk Rail Molding PartDescription 60805 3/4” Track Corner Cap/Hand Hold Bulkhead Molding • 3/4” inside track • Use with 60825 13 PartDescription 60847 Bunk Rail Molding • 5 ft. length 16 2 38 7 1 8 Part Description 60855 • 3” Wide x 3/8” Thick • 5 ft. length Part Description 60857 • 1-7/8” Wide x 3/8” Thick • 5 ft. length Part Description 60858 • 1-7/16” Wide x 3/8” Thick • 5 ft. length PartDescription 60859 • 1-3/16” Wide x 3/8” Thick • 5 ft. length PartDescription 60860 • 7/8” Wide x 3/8” Thick • 5 ft. length A B “A” Dimension: 3/8” e finest teak lum be f th r eo d by the governm tifie en cer PartDescription 60827 3/4” Track Outside Corner Bulkhead Molding • Inside radius: 2” • Outside radius: 2-1/2” PartDescription 60826 3/4” Track Inside Corner Bulkhead Molding • Inside radius: 2” • Outside radius: 2-1/2” Molding available in 5 ft. lengths 18 1 38 1 PartDescription 60835 Straight Length Edge Molding • 5 ft. length 16 4 3 Battens aged forests. man Ma d rom Edge Molding as ailand harveste df f Th to 3/4” Track Bulkhead Molding 13 4 3 5 16 1 8 5 16 1 2 Part Description 60843 Large “L” Molding A Dimension: 1-3/16” B Dimension: 1-3/16” C Dimension: 13/16” • 5 ft. length Part Description 60844 Small “L” Molding A Dimension: 7/8” B Dimension: 7/8” C Dimension: 5/8” • 5 ft. length Quarter Round Molding Part Description 60850 Large Quarter Round A Dimension: 1/2” B Dimension: 1/2” • 5 ft. length A B Part Description 60851 Small Quarter Round A Dimension: 3/8” B Dimension: 3/8” • 5 ft. length Stop Molding Corner Wire Molding Part Description 60840 Large Cap Molding A Dimension: 1/2” B Dimension: 7/8” C Dimension: 1-3/16” D Dimension: 3/4” • 5 ft. length PartDescription 60841 Small Cap Molding A Dimension: 3/8” B Dimension: 5/8” C Dimension: 7/8” D Dimension: 1/2” • 5 ft. length Part Description 60861 See Illustration for dimensions • 5 ft. length A B Part Description 60853 Large Stop Molding A Dimension: 3/8” B Dimension: 3/4” • 5 ft. length Part Description 60854 Small Stop Molding A Dimension: 3/8” B Dimension: 3/8” • 5 ft. length 2 19 Trim Teak Plugs Finger Pull PartDescription 60150 1/4” Plug 62516 5/16” Plug 60151 3/8” Plug 60152 1/2” Plug 60153 5/8” Plug 60154 3/4” Plug 60155 1” Plug PartDescription 60145 5/8” Barrel Length • 1-1/4” O.D. • Recess mount 60146 1” Barrel Length • 1-1/4” O.D. • Recess mount PartDescription 60148 4” Thru-Hull Plug 60149 6” Thru-Hull Plug PartDescription 60124 • 4-1/16” W • Recess mount, 1/2” Deep • 2-pack Round Drawer Knob Round Drawer Pull PartDescription 60120 • 2” Diameter • Surface mount • 2-pack with hardware PartDescription 60127 • 1-3/8” Round • Recess mount, 3/8” Deep • 2-pack Square Drawer Knob Rectangular Drawer Pull Large Rectangular Drawer Pull PartDescription 60131 • 2-3/4” W • Surface mount • 2-pack with hardware PartDescription 60142 • 4-1/2” W • Recess mount, 1/2” Deep • 2-pack Oval Drawer Pull PartDescription 60147 • 4” W • Surface mount • 2-pack with hardware Part Description 60171 • 3-5/8” W x 5-1/16” H • 2-pack Switch Cover, Switch Plate Part Description 60172 • 3-5/8” W x 5-1/16” H • 2-pack Blank Cover, Cover Plate Part Description 60174 • 3-5/8” W x 5-1/16” H • 2-pack Teak Trim Rings Part 61973 Description 5-3/8” Diameter Trim Ring • 3” Diameter Opening (ID) • 3/8” Thick • 5” Inner Diameter (inside flange) 61974 6-3/8” Diameter Trim Ring • 4” Diameter Opening (ID) • 3/8” Thick • 6” Inner Diameter (inside flange) • Pre-drilled mounting holes • Back recessed , 1/8” flange • Use to trim out portholes e finest teak lum be f th r eo d by the governm tifie en cer 20 PartDescription 60135 • 3-1/4” W • Recess mount, 1/2” Deep • 2-pack Rectangular Drawer Knob PartDescription 60137 • 3-5/8” from center to center • Surface mount • 2-pack Part Description 60170 • 3-5/8” W x 5-1/16” H • 2-pack aged forests. man Ma d rom Oblong Drawer Pull Handle Drawer Pull Outlet Cover, Receptacle Plate Ground Fault Outlet Cover, Receptacle Plate • 20 per package Thru-Hull Plug PartDescription 60130 • 1-1/8” Square • Surface mount • 2-pack with hardware Covers & Trim Rings as ailand harveste df f Th to Teak plugs are available individually or in bulk packs of 20, 100 and 500 pieces. Call for price and availability. • 2 per package 21 Louvered Inserts Doors & Drawers Louvered Insert 12” x 12” Louvered Door & Frame Right Hand Opening PartDescription 60712 • 9-1/8” W x 7-1/2” H x 3/4” Thick • Cutout: 8-1/2” W x 6-1/2” H Part 60720 Description • Cutout: 11” W x 11” H 12” x 12” Louvered Door & Frame Left Hand Opening Part 60721 15” x 15” Louvered Door & Frame Right Hand Opening Louvered Insert Part 60722 PartDescription 60710 • 9-1/8” W x 16” H x 3/4” Thick • Cutout: 8-1/8” W x 15” H Description • Cutout: 14” W x 14” H 15” x 15” Louvered Door & Frame Left Hand Opening e finest teak lum be f th r eo Part 60723 d by the governm tifie en cer aged forests. man Ma d rom Description • Cutout: 11” W x 11” H Description • Cutout: 14” W x 14” H 15” x 20” Louvered Door & Frame Right Hand Opening as ailand harveste df f Th to Part 60724 Louvered Insert PartDescription 60714 • 11-3/16” W x 6-3/8” H x 3/4” Thick • Cutout: 5-3/8” H x 10-3/16” W Description • Cutout: 14 W” x 19 H” 15” x 20” Louvered Door & Frame Left Hand Opening Part 60725 Description • Cutout: 14” W x 19” H 12” Drawer/Door Front & Frame Part 60730 Description • 12” W x 6” H Louvered Insert 15” Drawer/Door Front & Frame PartDescription 60716 • 18” W x 9-3/8” H x 3/4” Thick • Cutout: 17” W x 8-3/8” H 18” Drawer/Door Front & Frame Part 60732 Part 60734 Description • 15” W x 7” H Description • 18” W x 8” H 21” Drawer/Door Front & Frame Part 60736 Air Conditioning Vent Part 60629 Description • Adjustable slats control air direction • 9-3/4” W x 5-3/4” H x 1-1/2” Thick • Cutout: 8-3/4” W x 4-3/4” H 1/2” Stainless Steel Offset Hinges FRAME Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge. All items have a 1/2” rabbet and use a cutout size one inch less than the listed dimension. Hardware is not included with drawer and door fronts. 22 Description • 21” W x 9” H (NOT PICTURED) Hinge OR DO " 1/2 set off PartDescription S-3025 • Can be used with teak drawer and louvered door fronts • Sold individually Size Offset FastenerMaterial 1-1/2” x 2-1/4” 3/8” x 1/2” #8 (5) 304 SS 23 Grate Material Teak Lumber Build Your Own Teak Cockpit Grate Teak Grate And Framing Material Dimensions Part Description A B C 60862 1/2” Grating Material 15/32” 1/2” 15/32” 60875 1/2” Flat Grating Material 15/32” 60887 1/2” Framing Material 1-3/4” 15/32” 60863 3/4” Grating Material 11/16” 3/4” 11/16” 60876 3/4” Flat Grating Material 11/16” 60888 3/4” Framing Material 2-3/4” 11/16” 60864 1” Grating Material 15/16” 1” 15/16” 60877 1” Flat Grating Material 15/16” 60889 1” Framing Material 2-3/4” 15/16” Grating & Framing Materials Available in 4’ Lengths Only 3/4” Grate Material Use in showers or cockpits with relatively flat configurations. C Grate Frame Material aged forests. man Ma d rom as ailand harveste df f Th to Grating Material 4’ Louvered Door Side Rails PartDescription 60880 • Pair-left and right • 1-7/8” W x 4’ L x 7/8” Thick Louvered door material makes it easy to build your own custom-sized louvered door. Assembles with simple tools. Just measure, cut, drill and assemble. To determine the amount of slat material needed, subtract 4” from the overall width of the door and 4” from the overall height of the door and multiply the two numbers. This will equal the total number of inches of louver slats required. Don’t forget the dowel pins. d by the governm tifie en cer Flat Grating Material Louvered Door Material Assembly Measure, cut, assemble with glue, drill with a countersink bit, and screw together with brass or stainless screws. We recom mend applying waterproof glue to every grate intersection, and using a screw at every other intersection. The use of screws during construction is especially important in the two larger sizes of grating material. e finest teak lum be f th r eo e finest teak lum be f th r eo aged forests. man Ma d rom Build Your Own Teak Louvered Door If framing is required, consider Dimension A of framing material. C 24 Length 12” 36” 60” 30” 36” 72” 30” 48” 12” 3-7/8” 36” as ailand harveste df f Th to B Grating Material 1/2” Grate Material Use for icebox grating or where the grate will not need to support a significant load. ThicknessWidth 3/8” 5-3/4” 3/8” 5-3/4” 3/8” 5-3/4” 1/2” 1-3/4” 1/2” 1-3/4” 1/2” 1-3/4” 7/8” 7/8” 7/8” 1-3/4” 7/8” 3-3/4” 7/8” 3-3/4” 7/8” 4” d by the governm tifie en cer A A Part 60808 60809 60810 60811 60812 60813 60814 60815 60816 60817 60818 When building a grate use materials that are all the same thickness, 1/2”, 3/4” or 1”. See chart on left. Use these material ordering guidelines: 1/2” Grating: One strip of each type of grating for each inch of the area you are covering in both directions. 3/4” Grating: One strip of each type of grating for every 1-1/2” of the area you are covering in both directions. 1” Grating: One strip of each type of grating material for every 2” of the area you are covering in both directions. Flat Grating Material A Teak Lumber 1” Grate Material Use in cockpits with a significant slope, or places where grating would be required a carry a heavy load. Cockpit Grate Material Dimensions A Build your own customized cockpit grate. Whitecap offers notched grating material in three thickness/cutout sizes with corresponding flat grate strips. A grate can be built two ways: Use notched strips in both directions, or use notched strips in one direction on the bottom layer and flat strips in the opposite direction on the top layer. This construction style will allow water to drain underneath grates installed on flat surfaces. 4’ Louvered Door Top or Bottom Stile PartDescription 60881 • 1-7/8” W x 4’ L x 7/8” Thick 4’ Louver Slat Material PartDescription 60882 • 1-3/16” W x 4’ L x 3/16” Thick Dowel Pins PartDescription 60883 • 1-1/2” L x 1/2” Diameter • Package of 8 Grate Frame Material 25 Drink Racks Racks Compass Rack PartDescription 60461 • Inside: 3-1/2” W x 3-1/2” H x 1-5/8” D • Outside: 4-1/4” W x 4-1/8” H x 2-1/4” D • Pre-drilled mounting holes Curved Two Drink Rack PartDescription 63218 • 12” W x 3” Hx 5” D • Holds two glasses, cans or bottles • 2-7/8” drink cut-outs •Pre-drilled mounting holes •Use 61395 steering pedestal clamp to mount to 7/8” and 1” pedestal guard tubing Binocular Rack PartDescription 62702 • Inside: 7-7/8” W x 4-3/8” H x 2-7/8” D • Outside: 8-3/4” W x 4-7/8” H x 3-1/2” D •Full color retail packaging Curved Four Drink Rack PartDescription 63219 • 17-3/8” W x 2-7/8” H x 6” D • Holds four glasses, cans or bottles • 2-7/8” drink cut-outs •Pre-drilled mounting holes •Use 61395 steering pedestal clamp to mount to 7/8” and 1” pedestal guard tubing Large Binocular Rack PartDescription 62704 • Inside: 8-1/2” W x 4-3/4” H x 3-5/8” D • Outside: 9-1/4” W x 5-1/8” H x 4-1/4” D • Designed for compass models •Full color retail packaging Four Bottle/Glass Holder PartDescription 62555 •22-1/4” W x 4-1/2” H x 4-1/2” D •Will hold bottles, insulated can holders or tumbler-type glasses Cell Phone Rack PartDescription 62710 • Outside 3-1/4” W x 6” H x 2-3/16” D Handheld VHF/GPS Rack PartDescription 62708 • Outside 3-7/8” W x 6” H x 3-1/8” D 4 Glass Holder w/Tray PartDescription 60218 •14-1/4” W x 3-1/2” H x 4” D • Holds glasses, bottles or cans aged forests. man Ma d rom as ailand harveste df f Th to 26 e finest teak lum be f th r eo d by the governm tifie en cer d by the governm tifie en cer e finest teak lum be f th r eo aged forests. man Ma d rom PartDescription 62706 • Outside: 4-1/2” W x 6” H x 4-3/8” D as ailand harveste df f Th to Large Handheld VHF/GPS Rack 27 Drink Racks Drink Racks Folding Drink Holder Three Mug Rack PartDescription 62601 • Closed: 4-1/2” W x 3-3/4” H x 1-1/2” D •Full color retail packaging PartDescription 62410 • 11-1/8” W x 3-1/2” H x 4-1/8” D • Holds mugs or cans in insulated drinkholders Folding Insulated Drink Holder PartDescription 62602 • Closed: 5-1/4” W x 3-3/4” H x 1-3/4” D • Holds can in insulated drinkholder Four Drink/Binocular Rack PartDescription 62632 • 14-3/8” W x 3-3/4” H x 3-7/8” D • Holds 4 cans or bottles, or 2 drinks and one pair of binoculars •Full color retail packaging Two-Drink Rack PartDescription 62610 • 7-1/2” W x 3-1/2” H x 3-5/8” D • Holds two cans or bottles aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo as ailand harveste df f Th to Two Insulated Drink Rack Four Insulated Drink/Binocular Rack PartDescription 62612 • 8-7/8” W x 4” H x 4-1/2” D • Larger openings hold two cans in insulated drinkholders, cups or bottles PartDescription 62634 • 16-1/2” W x 3-1/2” H x 4” D •Larger holes hold 4 glasses or cans in insulated drinkholders or 2 glasses or cans in insulated drinkholders and one pair of binoculars •Full color retail packaging Two Insulated Drink/Binocular Rack w/ Tray Three Insulated Drink/Bottle Rack PartDescription 62616 • 13” W x 3-3/4” H x 4-5/8” D • Larger hole size holds two insulated cans or one pair of binoculars PartDescription 62624 •13” W x 4” H x 4-3/4” D •Larger holes hold 3 glasses or cans in insulated drinkholders aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo as ailand harveste df f Th to 28 29 Tables Tables Grooved Top Fold-Away Table/Stool Grate Top Fold-Away Table PartDescription 60030 • Solid brass hardware • Open: 17-3/4” square x 18-1/2” H • Closed: 17-3/4” W x 23” H x 2-3/4” D • Quick set-up and folds for storage • Oiled finish PartDescription 60034 • Solid brass hardware • Open: 10-3/4” W x 11-3/4” H x 9-3/4” D • Closed: 10-3/4” W x 14” H x 2-3/8” D • Quick set-up and folds for storage • Oiled finish aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo as ailand harveste df f Th to Cockpit Grate End Table PartDescription 60020 • 20” W x 18” H x 16” D • Assembly required • Oiled finish Butler’s Table PartDescription 60018 •Solid teak with brass hinges •Outer edges fold up to form handles •Tabletop is easily removed for use as a serving tray •Measures: 37-1/4” W x 30” D (top open) x 21” H •Some assembly required, brass hardware included •Oiled finish Solid Top Fold-Away Table PartDescription 60031 • Solid brass hardware • Open: 17-3/4” square x 18-1/2” H • Closed: 17-3/4” W x 23” H x 2-3/4” D • Quick set-up and folds for storage • Oiled finish Small Adjustable Slat Top Table PartDescription 60028 • Top: 19-3/4” W x 16” D • Height: 14” or 17-3/4” • Folded: 16” W x 24-1/2” H • Oiled finish aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo Both tables feature a solid teak, under table locking height adjustment mechanisim. as ailand harveste df f Th to To open the table, lift the leaves and rotate 90° Drop Leaf Table PartDescription 60055 • Top Open: 27-3/4” W x 20-1/2” H x 18-1/2” D • Drop Leaves Down: 18-1/2” W x 20-1/2” H x 10-5/8” D • Oiled finish 30 Large Adjustable Slat Top Table PartDescription 60029 • Top: 35-1/2” W x 27-5/8” D • Height: 23” or 27-1/2” • Folded: 27-5/8” W x 43” H • Oiled finish 31 Seating Director’s Chair PartDescription 60041 Chair With Blue Seat Covers 60044 Chair With Natural Seat Covers 60040 Chair Without Seat Covers • Solid brass hardware • 100% cotton canvas seat covers • 18” high from floor to seat • Folds for easy storage • Oiled finish Captain’s Chair PartDescription 60045 Chair With Blue Seat Covers 60048 Chair With Natural Seat Covers 60039 Chair Without Seat Covers • Solid brass hardware • 100% cotton canvas seat covers • 30” high from floor to seat • Folds for easy storage • Oiled finish Glider Chair PartDescription 60097 • 24” W x 40” H x 31” D • Smooth gliding motion • Contoured seat and back • Chair slats are spaced close together for comfort and support • Oiled finish aged forests. man Ma d rom d by the governm tifie en cer e finest teak lum be f th r eo as ailand harveste df f Th to 32 Fold Down Foot Rest Whitecap Industries, Inc. 131 Ethel Road West Suite #5 Piscataway, NJ 08854 Phone: 732-819-4666 Fax: 732-819-3559 E-mail: info@whitecapindustries.net www.WhitecapTeak.com Printed in the USA with Soy Ink on Recycled Paper ©2014 Whitecap Industries, Inc. (0814) ©2014 Teak Photography HSD, Inc.
