Grain Processing Machinery

Grain Processing Machinery
Agromachinery of Professionals
04Rostselmash worldwide
06High altitude grain
conveyor auger
08Screw grain conveyor
10Vacuum reloader-cleaner
12Self-propelled seed thrower
14PSM-20 Seed protectant
16
OZM-17 Drum Grain Cleaner
18MZV and MZM Roller and
Hammer Mills
20Grain Processing Equipment
22Technical characteristics
Introduction
RELIABLE MACHINERY FOR HIGH-QUALITY
GRAIN PROCESSING
Postharvest grain processing is one of the most important stages of production, on which the result of
the whole long-term and difficult work. Rostselmash machinery will allow to perform the whole range
of work on grain processing – clearing, treatment, restoring and loading. Integrated approach and
portability of Rostselmash machinery will help you to optimize expenses and high-quality work will
ensure the most gentle treatment of grain.
2 Menzhinskogo Street,
Rostov-on-Don, Russia 344029
tel.: +7 (863) 255-20-43, 250-30-56
fax: +7 (863) 255-21-07
web-site: www.rostselmash.com
e-mail: market@oaorsm.ru
3
ROSTSELMASH WORLDWIDE
RUSSIA
Canada
USA
Rostov-on-Don
Rostselmash
manufactures Rostselmash grain/forage
harvesters and self-propelled mowers, and
VERSATILE tractors and sprayers.
Winnipeg
VERSATILE
produces 195-575 h.p. VERSATILE
tractors. Central VERSATILE spare parts
store.
Salem
Feterl Manufacturing Corp
manufactures grain processing and storage
equipment supplied to the Russian market
under the trademark of ROSTSELMASH.
Rostov-on-Don
Klever
produces adapters for Rostselmash harvesters, drawn/mounted forage machinery,
equipment for grain processing and storage, municipal vehicles and snowploughs.
Farm King
manufactures grain reloaders, grain
cleaners, snow throwers and compact
tillers. Central Farm King spare parts
store.
Fargo
Farm King
produces bale carriers, grader blades,
front-end loaders supplied to the
Russian market under the trademark of
ROSTSELMASH.
Morozovsk, Rostov Region
Morozovskselmash
manufactures adapters for Rostselmash
harvesters and drawn/mounted forage
machinery.
Vegreville
BUHLER EZEE-ON
New assets of Rostselmash Group,
produces tillage and seeding equipment.
Villmar
VERSATILE
manufactures drawn and self-propelled
sprayers supplied to the world market
under the trademark of VERSATILE.
Rostselmash worldwide
5
Experience. Innovations. Success
Over 80 years Rostselmash has produced agricultural machinery demanded all over the world. This fact made it possible to gain a
tremendous experience allowing to make a real-time response to constantly changing customer demands and to develop effective
harvesting solutions.
Today Rostselmash unites 13 enterprises located all around the world and aimed at one single target – production of reliable and
efficient machinery capable of becoming an indispensable assistant to each farm.
Investment in production development, attention to customer opinion and tendency to use innovative technologies together with
accumulated experience are the basis of Rostselmash success. Our equipment has outgrown its traditional CIS markets long ago
gaining confidence of a large number of farmers from Canada, USA, Argentina, Eastern Europe, Middle East and Africa.
As of today Rostselmash offers 20 different types of agricultural machinery and over 100 various models and modifications. Thus,
everyone from a small farmer to CEO of an agricultural holding company may choose for themselves the most efficient Rostselmash
equipment.
The line-up of the grain processing machinery was included into the core group of Rostselmash production in 2011. The Company
constantly invests in growth of production capacity flexibility, carries out technical upgrading and modernization of the entire
production process. So far, the equipment and the design and production technologies meet the best foreign standards. Rostselmash
takes care for your harvest and that is exactly why the specialists of the company contributed their experience and qualification to the
creation of grain processing machinery, which will allow agrarians to save grain without any losses, increase sowing qualities, easily
transport grain to elevators. Seed disinfector, seed thrower, crushing mills, grain reloaders, grain cleaners – each machine will your
safe helper.
HIGH ALTITUDE GRAIN CONVEYOR
AUGER TSHV
High altitude grain conveyor auger is designed for transfer of grain (spiked grains, cereals, legumes,
industrial and oil crops) from the place of storage (gather) to the equipment for treatment and storage (and in
reverse sequence).
The following technical operations are possible:
UNICITY
• h
igh storing bunkers formation;
• acceptance of grain from automotive and railway transport;
• loading of fast install demountable mobile type ring
warehouses;
• loading of grain into silo type grain elevators, onto cornfloors
and into hangars;
• loading of grain carriers, grain cars;
• loading of barges, lighters, and ships.
Double-lever upright support type structure allows to lift
the main auger. Being driven by a powerful hydraulic cylinder
a unique device – chassis frame – is able to hold an angle of
44° under conditions of maximum load. When the cylinder is
fully compressed the angle of the auger is changed to 5° – to
the transportation mode. Upon achieving any desired height the
blocking valve fixing the hydraulic cylinder of lifting.
Available reloaders of different diameter and length –
(25,4 or 33 cm), the length (from 15 to 29 m. Feed grain
tanker (1,1 х 1,5 m) can quickly reload a large quantity of
grain into the tower. Each of the models is distinguished
by high reliability, the minimum of consumed power and
service losses.
MOBILITY AND MANEUVERABILITY
A feed auger can be placed to the left or to the right of the main
auger depending on work conditions. The feed grain tank by
order can be equipped with hydraulic motors for facilitating
replacement of the feed auger to the working position.
Grain cars loading
Loading barges and ships
High altitude grain conveyor auger
7
Double-acting valve
As an option THV is completed with two valves, which allow the hydraulic system of the
feed grain tank hoist winch and the feed grain tank engine to work using only 2 ground
level valves. The system of hydraulic equipment control excludes the necessity of
switching the hoist winch and the grain tank manually.
System of the hydraulic equipment control
Due to using built-in system of hydraulic equipment control system the feed auger can be
lifted to the level convenient for transportation and the receiving hopper is placed into the
proper position. In comparison with other structures this system allows to save manual
labor during grain processing.
Hydraulic engine of the grain tank
In case of including this option into the complete set of each inside wheel a powerful
hydraulic engine is added to the feed auger, that is why the receiving hopper can be
installed easily and with minimal efforts. With a simple move of the hydraulic lever the
feed auger can be moved to any exact position at the top or at the bottom of the dump
truck tank. For providing easy excess a detent lever is installed on the pipe of the inlet
auger.
Wire cable and structural features
1.27 and 1.9 cm long wire cables provide bridge type structure for maximization of rigidity
and right load distribution. The wire cables can be strained or loose in accordance with an
operation carried out. Considering that the auger measures up 29 meter length, stability
and manoeuvraitely during the auger adjustment have primary importance.
Hydraulic winch
with a hydraulic winch (option) which simplifies lift of the grain tank for transportation.
Transportation
38 centimeter tires are designed for treacherous driving conditions. They are supplied
completed with bolt / rim structures number 5 and 6, automobile type hubs and bearings.
Copying
The self-balancing feed hopper on the feed auger is kept at the proper level irrespective of
the auger height. The unique structure allows two-section feed hopper to be loaded even
under conditions of uneven surface.
The maximum loading height
is from 11 to 20,2 m, the
production capacity is from
140 to 280 tonn per hour.
up to 20,2 m
up to11,8 m
WIDE MODEL LINE-UP
The model line-up of high altitude grain reloaders consists
of 7 different according to the productive capability and the
dimensions of the tires. They have wide loading range – from 11 to
20,2 m. The productive capability at your option can amount 140
and 280 tons per hour and the diameter of the auger – 25,4 or
33 cm. Each of the models distinguishes itself by high reliability,
minimum power consumption and minimum service charges.
HEIGHT TO 20.2 M
The unique distance from the top point to the ground –
20.2 m – allows to carry out loading even into the highest
silo towers. For providing rigidity of the structure the frame
of the reloader is assembled of thick steel tubes 12 x 12 cm,
the length of the exterior side of the chassis is 37 cm. A rigid
base provides rigidity during operation period.
AUGER TYPE GRAIN CONVEYOR
Rostselmash grains reloaders are designed for loading of grain elevators from the transport facility and loading to the
transport facility grain from the grain elevator. The model range consists of 16 units different in accordance with
productivity rate and dimensions and each of the models is characterized by high reliability, minimum quantity of power
consumed and service charges. The machines can be driven from the PTO shaft of a traktor, an electric or gasoline motor.
Reload from the grain elevator
Reload from a transport facility to
grain elevators
Screw grain conveyor
Drive mechanism
Auger drive in TSH grain reloaders is performed
through a bevel gear speed reducer and chain
drive of the auger. which is The latter is placed
into an oil cushion due to which stable work is
provided under such difficult conditions like
dustiness, high humidity and high temperature.
Movable wrought gaskets, ball bearings and heattreated gear wheels allow the drive mechanism
to operate smoothly and to consume less energy.
Agricultural producers can also choose the most
convenient type of drive: PTO shaft drive of a
tractor, an electrical motor drive or a gasoline
engine drive.
The models having belt-drive are equipped with a selfbalancing engine and with belts self-straining system.
The belt guards are included.
Auger tray
A wide protective guard and a dismountable safety catch
facilitates the access to the auger tray. If there is no necessity of
using the safety catch it can be fasten to the supporting bracket.
Reduction gear box
The reduction gear box of a left- or right side is placed in such
a way that allows the auger to sink into the grain tank deeper.
TH-70, TH-140 and TH-280 models are complete with reverse
reduction gears.
Stable chassis frame
The wide chassis frame provides stability and rigidity. It
is achieved by means of a large base of rectangular tubes
increasing the rigidity and durability of the structure.
The maximum loading height
is from 4,9 to 12,8 m, the
productive capacity is from
50 to 280 tons per hour.
up to 12,8 m
9
PZV-110 VACUUM GRAIN RELOADER
Vacuum reloader is designed for reloading grain from a transport facility to
the grain elevator, from the grain elevator to a transport facility or from one
grain elevator to another grain elevator together with simultaneous cleaning
of the grain from dust.
Discharge jet
Safety filter protects grain against getting into the
dust separator
Flexible steel and aluminum
hosepipes of the reloader
Precleaning tank
The main conic
shaped grain
receiving tank
Forced draft
blower
Airlock
Vacuum reloader-cleaner
Air-lock chamber
For reaching and supporting the best
efficiency the components of the airlock chamber are made of steel with
a specially high accuracy. The rotors,
for the purpose of their service life
extension, are equiped with adjustable
heads and reinforced bearings. For the
purpose of the convenience of work with
different cultures the air-lock chamber
rotor speed regulation is provided.
Dust separator
Getting through the dust separator dust
is set down in the dust tank and fresh
air turns back to the air-lock chamber
through the pressure blower, pushing
grain out.
11
Forced draft blower
The tested forced draft blower is the
heart of the system. It is produced in
accordance with the requirements
concerning any permissions for
providing maximum productive capacity,
which allows you to transport grain for
long distances.
Noise damper
The high-efficiency noise suppressing
system decreases noise intensity more than
by 50 % without any loss of the productive
capacity of the equipment.
Reloading from the grain elevator into any transport facility
Couplers
The couplers for quick coupling provide
tight fit for supporting the maximum
vacuum and pressure. The possibility
of insuring quick coupling simplifies
the process of adding or eliminating
any extension unit in the process of
filling high tanks or, in case of necessity,
transporting grain for more long
distances.
up to 30 m
Reloading from one grain elevator to another
Reloading from any transport facility to the grain elevator
up to
30 m
MZS-90 SELF-PROPELLED SEED THROWER
Due to the ability of the trimmer to rotate around it axis by 135° in both directions the seed thrower usage and
implementation in different works increases and simplifies. Thus, for example, loading grain material into any transport
facilities can be performed continuously. In the course of restoring or loading the warehouse the seed thrower can replace
grain to one or another side from the axial axis or discharge grain behind itself. With the help of the rotating thrower it is
possible to form from a low and wide storage bunker and to the contrary and to form a storage tank of grain heaps.
The angle of the trimmer rotation to both
directions is 135° from the direct axis which
increases technical possibilities of work.
The loading conveyor drive
electrical motor
Loading conveyor
Winches for lifting and
lowering feeder device
Lifting mechanism
of the loading conveyor
Trimmer
Electrical box
Front move
There is costate endless tape loaded into the trimmer. Due to
it the productive of the thrower into any transport facility. In the
course of loading into a transport facility the volume of wheat in
reaches 90 tons per hour.
Brake arrangement of the trimmer
The forward drive with a compact import motor guaranties
long-term and constant work of MZS making its structure simple
and reliable.
Self-propelled seed thrower
13
Feeding unit on MZS-90-20-01M is scraping. It gives advantage
in comparison with the feeding and practically full absence of
grain crush during sweeping.
Availability of the possibility to sink feeding units into the negative
and the positive angles horizontally increases the convenience
of work with the grain thrower in the storing bunkers and in the
course of its transportation.
Possibility of additional options:
• a
uger feeder;
• f requency converter designed for smooth regulation
of motion;
• b
ackward motion;
• a
dd-on unit to the gutter желоба, for increasing
loading height.
Loading grain into transport facilities
• L
oading grain into transport
facilities.
• M
echanical scooping
(restoring) of grain on
any open grounds during
transporting the grain from
any combine.
• Storing bunkers
formation of grain heaps
being delivered by any
transporting machines
to the grounds of the
combine.
• G
rain separation with
separation of float fraction.
• C
harging and discharging
grain elevators.
• One of the distinguishing
characteristics of MZS is
the possibility of charging
with a height of grain
material storage up to 6 m
and forming high bunkers
on the grounds of any open
threshing floors.
up to 6 m
up to 21 m
Restoring grain – up to 90 tons per hour
PSM-20 SEED PROTECTANT
The seed protector is designed for humidified treatment of cereal crops, legume crops and technical
cultures with the purpose of improvement of seeding characteristics and protection against any causative
agents being transmitted by means of seeds. Disinfection add-on is designed for application of working
liquid onto seeds of cereal crops, legume crops and technical cultures and for providing seeds for their
charging into any transport facilities, onto grounds and into bags.
The installed feeder is a
scrapper feeder. It provides
advantage in comparison with
a gain feeder – practically the
full absence of grain crushing
in the course of sweeping.
Any diseases emerging during the period of seed
sprouting are very difficult to be eliminated. Today
there are almost no any grain shipment without
any infection. Treatment is the only way to fight
against very dangerous smut grain crops deceases.
Preplanting seed disinfection with the purpose of
their protection from any deceases and invaders
is one of the most necessary measures concerning
protection of plants.
Justified selection of the seed protector and
technical means for its application and high-quality
preparation of seeds before their disinfection is one
of the first conditions of defective seed production.
Rostselmash seed protectant is designed for
humidified treatment. Treatment of grain with the
help of PSM-20 machine is the guaranty of healthy
grain and high-yield crops in the future.
PSM-20 Seed protectant
15
The delivery auger has
through capacity up
to 20 tons per hour.
Due to protecting add-on has a possibility of
rotation around its axis by 120° in both directions
and sufficiently expands and simplified the
implementation of seed protectant.
Forward motion drivers with compact foreign motor-reducing
gear insures long-term and constant work of MZS making its
structure simple and reliable.
The construction of
agricultural machinery
allows to treat seeds at a
high speed and without
any losses of quality. For
balanced filling of the mixing
chamber a bunker for seeds
storage equipped with a
dosing flap is provided.
The working bodies drive
of the protectant is carried
out from four electric
motors. The seed protectant
is equipped with a control
board for their starting and
stopping.
Availability of the possibility to sink feeder units into the
negative and positive angles horizontally increases the
convenience of work with the seed thrower in the bunkers and in
the course of its transportation.
The feeder unit can copy relief of the surface of any open and
closed warehouses due to the installed copying wheels.
OZM-20 Mobile Grain Cleaner
Used for spiked grains, cereals, beans, technical crops and oil-seeds trashed heap cleaning. Also used for
cleaning grass seed from impurities, from rude gross foreign materials and from straw in order to obtain the
basic condition of the grain and prevent further pollution.
An individual cleaning mode can
be selected for any crop using
removable mesh.
Two-stage process includes cleaning inside the inner
conic mesh (gross trash) and then in outer cylindrical
mesh (smaller trash).
Galvanized sheet
Rough cleaning mesh
Purification mesh
Unique features
Feeding auger
(option)
The unique design, impressive
performance, minimal grain cleaning
cost are the unique features of
Rostselmach grain cleaners.
Clean grain
Gross fraction
Heap grain
Small fraction
OZM-17 Drum Grain Cleaner
17
Universality
Mobility
An individual cleaning mode can be easily selected for any crop.
Rotor removable mesh allows to make quality cleaning of any
crops or cereals.
Small dimensions and mobility allow to arrange optimal logistics.
Unload chute
Convenience
Inlet auger for grain feed into the cleaner is standard for OZM-20.
The height is
adjustable
The inlet auger is standard
for OZM-20
High-speed cleaning
The rotor ensures careful high-speed cleaning. Cleaner capacity
depending on the grain pollution condition is variable up to
20 tonnes per hour.
OZM-20 can be used
as a single set with
grain reloaders
MZV and MZM Roller and
Hammer Mills
Rostselmash roller and hammer grain mills are designed for grain (wheat, rye, barley, corn), beans and oil-seeds
crushing and granulation. Can be used independently and as a part of forage equipment. Rostselmash mills
guarantee high quality granulation at minimum expense.
High reliability
High-quality forage
Stable rolls contraction is achieved with dual plated springs.
Magnetic frame (standard) prevents any metal objects from
jamming the rollers inlet chamber.
Grain crushing and granulation is crucial for high-quality forage.
This forage is fully digested by the cattle and improves their
productivity. MZV compact roller mills are used for grain crushing
and MZM-2 hammer mill is used for granulation.
MZV and MZM Roller and Hammer Mills
Compact size
Relatively small weight and compact size make Rostselmash
mills easy to operate. Small and middle farms, which
dominate in Russia, find them highly efficient.
Durability
Hammer knives in hammer mills are made of high-quality
carbon steel and ensure fine chopping. Knives actuated by
3 kW electric motor.
Easy to adjust
Forage preparation (for cattle, sheep, etc.) requires different
grades of crushing. In Rostselmash roller mills you can
easily adjust the grade by shifting the shutter.
Economy
Rostselmash mills demonstrate high performance at
minimal energy consumption. The rated input is from 2.2 to
5.5 kW. You can use either electric motor or tractor PTO as
power supply.
Maneuvrability
Outlet auger on MZV-8 mills is powered by hydro-motor
and can rotate by 180 degrees to achieve maximum
convenience in operating.
Wheels on this model make it mobile and suitable for use in
forage preparation technological chains.
The shutter regulates grain feed.
Roller mills are
available in 3 types.
Capacity – up to 8.5 t
of grain per hour.
Outlet auger hydro-motor is standard for
MZV-8 model.
Heavy-duty covered bearings require no
lubrication.
19
Grain Processing Equipment
Grain Reloaders
– A
vailable in 16 different models (size and
capacity may vary);
– Maximum height from 5.5 to 12.8 meters;
– Capacity from 50 to 280 t/h.
Mobile Grain Thrower
–
–
–
–
–
–
E
lectric drive;
C
apacity up to 100 t/h;
T
hrowing height more than 4.5 meters;
T
hrowing range up to 20 m;
R
otation by 135 degrees;
E
qual grain distribution during granary loading.
Grain Cleaners
–
–
–
–
p to 20 tons of pure grain per hour;
U
Small size, mobility;
Rotor diameter from 91 to 122 cm;
Removable mesh for different types of grain.
Backsaver auger
– A
vailable in 7 different models (size and
capacity may vary);
– Maximum height ranging from 11 to 20.2 m;
– Capacity from 140 to 280 t/h.
Vacuum Grain Reloaders
– S
ystem neutralizes the dust and impurities during
grain reloading and preserves the quality and value
of your crops;
– Maximum capacity up to 110 t/h;
– Reload range – up to 30 m, load height – up to 30 m;
– Can be powered by diesel generator or tractor PTO.
Grain Processing Equipment
21
TORUM 740 Grain Harvester
– P
ower output 500 or 400 h.p.;
– Tank capacity of 10,500 l;
– Grain unloading speed – 105 l/s.
Mobile Deed Protectant
– Electric drive, capacity up to 20 t/h;
– Humidity does not exceed 1%;
– Mechanical damage to the seed does not
exceed 0.3%.
PFU-0.8 FENIX Multipurpose
Front-End Loader
– P
ayload up to 800 kg (grain, bulk
materials, snow, gravel, sand, straw,
silage, manure, fertilizer, etc.). Suitable
for transportation and stacking of
bales and stacks of hay and straw;
– Available with interchangeable
adapters: bucket, loader rake, lifting
appliance, fork, dozer blade.
Roller and Hammer Mills
– W
ide range of models;
– Adjustable rollers diameter – from 20 to 25
cm;
– Capacity ranging from 1.4 to 8.5 t/h;
– Magnetic protective frame.
CORMORANT-VERTICAL
Mixing Feeder
– M
ixes forage ingredients carefully so the
cattle eats everything down to the ground;
– A wide range of models (6, 8, 10 m3) for any
farms.
SEED PROTECTOR
PSM -20
Type
self-propelled
The productive capacity per 1 hour of the main operational time
(for wheat disinfection on surface with hard coating), tons, up to
Operating width, m
20
4
Weight of a chopper without spare parts and package, kg, not more than
Dimensional specifications, mm, not more
Operating position
– length
– width
– height
Operating speed, km/h, not more than
Traveling speed in tow, km/h, not more than
850+/-30
5 100
4 120
2 012
from 0 to 0.35
5
Pump
«Kama» N=0.4 kWt
Drive
electrical
Consumed power, kWt
6.6
Production process quality key indicators
Excessive humidity, %, not more than
Mechanical damage of seeds, %, not more than
Wheat disinfection fullness, %, not more than
1
0.3
100–5
MZS-90 SELF-PROPELLED SEED THROWER
МZS-90
Type
self-propelled
The productive capacity per 1 hour of the main operational time (at loading
to transport facilities wheat having bulk weight of 7 603 kg/m3 at humidity of
20% on the surface with hard coating ), ton, up to
Operating width, m
90
4
Weight (constructive), kg, not more than
920 ± 30
Dimensional specifications, mm, not more
Operating position
– length
– width
– height
5 970
4 150
3 820
Operating speed, km/h, not more than
0.035
Traveling speed, km/h, not more than
2.5
Special features
Traveling speed in tow, km/h, not more than
Drive
5
electrical
Distance of seed throwing from the place of grain intake by feeding unit, m, up to
Height of seed throwing, m, up to
21
6
Consumed power, kWt
8,1
Trimmer
Band width, mm
400 ± 5
Lead drum revolutions number, revolutions per minute
Band speed, m/sec, not less than
●
standard
○
option
720
15
— not available
Technical characteristics
23
ROLLER AND HUMMER GRAIN MILLS
Model
MZM-2
MZM-3
MZM-4
MZM-8
6 beater knives
20 cm
25 cm
25 cm
Number of splines on one inch
—
8 (6 corn)
8 (6 corn)
8 (6 corn)
Rollers prepressure
—
Double flat springs
Double flat springs
Double flat springs
Magnetic protective frame
●
●
●
●
electric motor 3 kWt,
3 450 revolutions per minute
(by order)
PTO or electric motor
2.2 kWt
PTO or electric motor
5.5 kWt
PTO 40–60 h.p.
Delivery auger
○
—
—
With hydraulic drive ●
Tires
—
—
—
●
66 kg
105 kg
145 kg
245 kg
2,1
1,4–2,8
2,8–4,2
5,6–8,5
Diameter of the roller of
Consumed power
Weight
Productive capacity, tons per
hour
●
standard
○
option
– not available
MOBILE GRAIN
CLEANER
VACUUM GRAIN
RELOADER
PZV-110
OZM-20
Diameter of rotor, cm
122
Suction pipe, diameter, cm
Overall length, m
2.49
Length, m
2.52
Width, m
3.66
Width, m
2.36
2.49
Consumed power, kWt
4.5
Transport height, m
Transmissing capacity, tons per hour
20
Discharge frame height (can be increased), m
Weight without the feed auger, kg
460
PTO speed, revolutions per minute
Heap gathering tray
●
Recommended power of the tractor (in h.p.)
Feed auger
●
Productive capacity, tons per hour
●
standard
○
option
— not available
15.24
3.7
1 000
110
up to 95
HIGH-ALTITUDE GRAIN CONVEYOR AUGER
THV-140-11
THV-140-13
2.7
3.0
А, height, m
– minimal
– middle
– maximal
3.4
7.2
11.0
3.4
8.4
13.3
В, sweep, m
– minimal
– middle
– maximal
7.9
10.2
5.5
9.2
12.8
6.8
Dimensions
0.25 x 15 m
0.25 x 18 m
140
140
Wheel tread, m
А
B
Productive capacity, tons per hour
38 cm
(5 bolts, hugs and automobile type bearings)
Wheels and hugs, cm
Feed auger drive
Dimensions of the feed hopper
1.1 х 1.5 m
1.1 х 1.5 m
60 h.p.
68 h.p.
1 155 kg
1 356 kg
Minimal power consumed at
PTO (540 revolutions per minute)
Weight
AUGER TYPE GRAIN CONVEYOR
TH-50-5
TH-50-8
TH-50-9
TH-70-4
TH-70-5
17. 7
17. 7
17. 7
20. 3
20. 3
50
50
50
70
70
Length of auger, m
11.0
12.5
14.0
9.4
11.0
Wheeltead, m
2.0
2.3
2.5
1.8
2.0
А, top, m
А, bottom, m
5.5
3.0
8.6
3.7
9.6
4.0
4.9
2.6
5.5
3.0
В, top, m
В, bottom, m
4.3
4.3
4.1
5.5
4.3
6.1
3.6
4.0
4.5
4.3
С, top, m
С, bottom, m
5.1
6.0
4.7
6.6
5.4
7.1
4.3
4.9
5.1
6.0
D, m
3.7
3.7
3.7
2.6
3.7
Engine, h.p.
(3450 revolutions per minute)
10-12
12-16
16-20
10-12
10-12
Electric engine, kWt
(1725 revolutions per minute)
5.9
6.6
7.4
6.6
7.4
Dimensions, cm
Productive capacity, tons per hour
А
D
C
B
Power
25
Technical characteristics
THV-140-14
THV-140-16
THV-280-15
THV-280-18
THV-280-20
3.7
3.7
3.7
3.7
3.7
3.8
9.2
14.6
4.1
10.4
16.8
4.1
9.7
15.2
4.2
11.1
18.1
4.5
12.3
20.2
10.9
10.1
8.5
13.9
12.1
10.6
11.3
14.7
8.4
13.8
12.1
9.7
16.9
14.7
11.8
0.25 x 21 m
0.25 x 24 m
0.33 x 21 m
0.33 x 26 m
0.33 x 29 m
140
140
280
280
280
38 cm
(5 bolts, hugs and automobile type bearings)
38 cm
(6 bolts, hugs and automobile type bearings)
Two inner reduction gears (drive through PTO, chain wheel and chain)
1.1 х 1.5 m
1.1 х 1.5 m
1.1 х 1.5 m
1.1 х 1.5 m
1.1 х 1.5 m
75 h.p.
85 h.p.
100 h.p.
110 h.p.
120 h.p.
1 522 kg
1 644 kg
2 349 kg
2 896 kg
3 034 kg
TH-70-8
TH-70-9
TH-70-10
TH-70-11
TH-70-12
TH-140-4
TH-140-5
TH-140-8 TH-140-10 TH-140-12 TH-280-5
20. 3
20. 3
20. 3
20. 3
20. 3
25. 4
25. 4
25. 4
25. 4
25. 4
33
70
70
70
70
70
140
140
140
140
140
280
12.5
14.0
15.5
17.1
18.6
9.4
11.0
12.5
15.5
18.6
11.0
2.3
2.5
2.5
3.0
3.1
1.8
2.0
2.3
3.0
3.1
2.3
8.6
3.7
9.6
4.0
10.7
4.0
11.9
4.0
12.8
4.0
4.9
2.6
5.5
2.9
8.6
3.2
10.7
3.9
12.8
4.0
5.8
3.0
4.1
5.5
4.3
6.1
4.8
6.7
5.7
7.9
6.5
8.9
3.6
4.0
4.0
4.2
4.2
5.5
5.1
6.8
6.5
8.9
4.0
4.3
4.7
6.6
5.4
7.1
6.1
8.2
6.2
8.6
7.1
9.3
4.3
4.9
5.4
6.3
4.6
6.5
5.8
8.2
7.1
9.3
5.0
5.9
3.7
3.7
4.3
1.8
1.8
2.5
3.8
3.6
4.3
1.9
3.3
12-16
16-20
18-20
n/p
n/p
18
22
24
28
n/p
30
8.8
10.3
11.0
11.0
11.0
11.0
12.5
13.2
14.7
14.7
16.2
FOR NOTES
2 Menzhinskogo Street,
Rostov-on-Don, Russia 344029
tel.: +7 (863) 255-20-43, 250-30-56
fax: +7 (863) 255-21-07
web-site: www.rostselmash.com
e-mail: market@oaorsm.ru