Solving humidity in indoor Ice Rinks
Transcription
Solving humidity in indoor Ice Rinks
Application Guide: Air Treatment Ice Rinks Climate Control Benefits •Extends skating season •Enhances indoor air quality •Lowers energy costs •Improves ice quality •Avoids structural decay •Eliminates musty odours •Fast recovery from resurfacing •Reduces maintenance Solving humidity in indoor Ice Rinks Humidity causes fog, condensation, mildrew, odours and rust. Munters desiccant dehumidification systems remove moisture from the air and eliminate these problems. Conventional systems, even those that include refrigeration dehumidifiers, do little to reduce humidity inside an ice arena. Under optimum conditions, these systems can maintain relative humidity's of 75% at 12.8oC. This means water will condense on the ice, and re-freeze. This inefficiency strains your equipment and drives up energy costs. The ice becomes slushy, skaters get wet when they fall, vision-obscuring fog forms, moisture condenses on surfaces causing decay in the building structure. Excess moisture condensing on the roof cause dripping on to spectators and damage to the ice. At the heart of Munters systems is the desiccant wheel that acts like a sponge, absorbing moisture from the air. For example a Munters system processing 3230m3 of air per minute removes 21.7kg of water per hour from an arena held at 13.3oC and 65%RH. A standard refrigeration dehumidifier processing the same airflow can only remove 6.8kg per hour. Munters system does more work than three standardrefrigeration units. Munters system dehumidifes the air, promoting a healthy, fresh indoor environment that turns complaints into compliments. Spectators and skaters enjoy the warm dry air from Munters systems much more than the cold, standard air blown into arenas by ineffective cooling dehumidifiers systems. Since air is dry, the ice recovers quickly after resurfacing operations, so there’s more skating and less waiting. Before Munters dehumidification and after Munters systems do not use Freon, have no frozen coils and no condensation. Munters dries the air so deeply that the arenas relative humidity will remain as low as 20-30% during unoccupied hours. At these levels, the ice stays hard and your refrigeration system can operate at maximum efficiency, saving energy and expensive system capacity. The Munters units satisfy global building codes, using the desiccant wheel to dehumidify whilst providing large volumes of fresh air for increased ventilation and spectator comfort. Vision-obscuring fog, which occurs when outdoor temperatures rise, poses a dangerous threat to skaters as well as an annoyance to spectators. Munters systems remove huge amounts of moisture from the air, ensuring fog-free conditions year round. Munters helps increase the amount of ventilation air in a building as required by ASHRAE and international building codes, thus improving arena indoor air quality. With a dry arena, there is no cold roof condensation to drip down on the collars of spectators. The cold, damp experience of the past is gone. Once, outdoor weather conditions controlled the quality of indoor ice. Now Munters systems create a winter-like humidity any time of the year, so skaters enjoy optimal ice skating conditions even during warmer seasons. With no excess humidity to condense on the rink, puddles don’t form, so skaters stay dry and comfortable. Without condensation dripping from roof supports, no mushrooms form on the ice, so resurfacing requirements are reduced. With 40 years experience dehumidifying skating, curling and bandy rinks and over 400+ installations worldwide. Munters back up and support is available behind each installation. Our engineers survey your arena and recommend the appropriate dehumidifier, layout to meet the unique requirements of each building. Arena operators often repaint roofing, ceiling supports and even entire roof systems because of condensed moisture leading to rot, corrosion, and decay. Munters system eliminates these costly maintenance problems. High relative humidity’s and condensation cause unpleasant odours that are annoying and uncomfortable for skaters and spectators. Because Munters systems eliminates moisture build up on the ice, surface condensation no longer freezes through several inches of ice. The refrigeration system will therefore run at its optimum efficiency, saving thousands in energy costs. Australia Phone +61 2 8843 1588, dh.info@munters.com.au Austria Phone +43 1 6164298-92-51, luftentfeuchtung@munters.at Belgium Phone +32 1528 5611, info@muntersbelgium.be Brazil Phone +55 41 3317 5050, munters@com.br Canada Phone +1 905 564 6466, dhinfo@munters.com China Phone +86 10 8048 3493, info@munters.com.cn Czech Republic Phone +420 775 569 657, info@munters-odvlhcovani.cz Denmark Phone +45 4495 3355, info@munters.dk Finland Phone +358 20 776 8230, laitemyynti@munters.fi France Phone +33 1 3411 5757, dh@munters.fr Germany Phone +49 4087 96900, mgd@munters.de India Phone +91 20 668 18 900, info@munters.in Italy Phone +39 0183 52 11, marketing@munters.it Japan Phone +81 3 5970 0021,mkk@munters.co.jp Korea +82 2761 8701, munters@munters.co.kr Mexico Phone +52 81 8262 5400, munters@munters.com.mx Netherlands Phone +31 172 433231, vochtbeheersing@munters.nl Poland Phone +48 58305 3517, dh@munters.pl Singapore Phone +65 6744 6828, info@munters.com.sg South Africa Phone +27 11 997 2000, info@munters.co.za Spain Phone +34 91 640 09 02, marketing@munters.es Sweden Phone +46 8 626 63 00, avfuktning@munters.se Switzerland Phone +41 52 343 8886, info.dh@munters.ch Thailand Phone +66 2642 2670, info@munters.co.th Turkey Phone +90 262 751 3750, info@muntersform.com UAE +971 4 8809295, middle.east@munters.com United Kingdom Phone +44 1480 432 243, dryair@munters.co.uk USA Phone +1 978 241 1100, dhinfo@munters.com Vietnam Phone +84 8 8256 838, vietnam@muntersasia.com Your closest office:
Similar documents
EM50 MPX - Munters
All declared values are measured and certified by Bess Lab (test #13611 and #13613). Airflow data are measured at standard conditions (20°C, 1,013 hPa).
More informationED36HE MPX - ED30HE MPX - ED24HE MPX
All declared values are measured and certified by Bess Lab (test #13332, #13337 and #13345). Airflow data are measured at standard conditions (20°C, 1,013 hPa).
More information