Chapter 04 Hand tools

Transcription

Luna_hand_tools.fm Page 241 Monday, March 30, 2009 11:42 AM
Screwdrivers - Bits
4
Hand tools
HAND TOOLS
Screwdrivers - Bits
Test screwdrivers
Light testers
Light tester
"Teng Tools" For light testing on cars. Of brass Well protected bulb. Needle point for inserting in insulation. With
protective sleeve, cable and clip. Nickel-plated.
Art. no.
2646
-0105
Teng Tools
No
9850
For voltage
V
6-24
Needle point, length
mm
10
Total length
mm
120
Cable length
mm
520
Pack.
qty
20
Screwdrivers
Angle screwdrivers
Angle screwdriver
"Wera" Chrome vanadium steel. Round blade. One of the screwdriver blades forms a 90° angle on relation to the
handles longitudinal direction, the other follows the handles longitudinal direction. Nickel plated. With plastic grip.
Art. no.
6636
-0108
-0207
-0306
Wera 920AScrewdriver thickness×wide
mm
0.6×4
1.0×5.5
1.2×8
Length
mm
100
125
150
Pack.
qty
5
5
5
Angle screwdriver
"Wera" For Phillips heads. Chrome vanadium steel. Round blade. Nickel plated. With plastic grip.
Art. no.
0205
-0102
-0201
Wera no
919 PH
1-2
3-4
For cross heads
No
1-2
3-4
Length
mm
125
200
Pack.
qty
5
5
Angle screwdriver
"Wera" For Pozidriv and Supadriv heads. Round blade. Bronzed. With plastic grip.
Art. no.
5311
-0102
Wera no
919 PZ
1-2
For cross heads
No
1-2
Length
mm
125
Pack.
qty
5
-0201
3-4
3-4
200
5
241
Hand tools
4
Screwdrivers - Bits
Mini screwdrivers
Mini screwdrivers in set
Art. no.
Driver thickness×driver width
Total length
Handle diameter
Case dimensions
Pack.
8553
mm
mm
mm
mm
set
-0202
0.25×1.0 0.4×1.4 0.4×2.0 0.5×2.4 0.6×3.0 0.6×3.8
73 83 92 102 113 126
3.5 4.5 5 6 7 8
130×70
20
Art. no.
Screwdriver thickness×wide
For Phillips heads
Handle diameter
Case dimensions
No. of sets
8554
mm
No
mm
mm
per pack.
-0201
0.4×1.4 0.4×2.00.5×2.4 0.6×3.0
0 and 1
6
130×70
20
"Teng Tools" Set of 6 mini screwdrivers. Supplied with rack/holder for wall mounting.
Art. no.
6894
-0105
Teng Tools
No
MDM706
Contents:Screwdriver MDM 713
mm
2.0x40
Screwdriver MDM714
mm
2.4x40
Screwdriver MDM715
mm
3.0x40
Screwdriver MDM716 Phillips
No
00x40
No
0x40
No
1x40
Pack.
set
10
Separate screwdrivers
6894
-0139
-0162
-0204
Teng Tools
No
MDM711
MDM712
MDM713
For hex holes
mm
2.0
2.5
With flat blades
mm
2.0
For Phillips heads
No
Total length
mm
125
125
125
Pack.
qty
10
10
10
Separate screwdrivers
6894
-0402
-0501
-0600
Teng Tools
No
MDM715
MDM716
MDM717
For hex holes
mm
With flat blades
mm
3.0
For Phillips heads
No
00
0
Total length
mm
125
125
125
Pack.
qty
10
10
10
-0303
MDM714
2.4
125
10
-0709
MDM718
1
125
10
Mini screwdrivers for TX heads
"Teng Tools" Set of 6 mini screwdrivers for internal TX heads.
Supplied with rack/holder for wall mounting.
Art. no.
10215
Teng Tools
No
For TX heads
TXBlade length
mm
Total length
mm
Pack.
sts
Separate screwdrivers 10215
-1008
-1107
Teng Tools
No
MDM806 MDM807
For TX heads
TX6
7
For screw
M
2
2.5
Overall length
mm
120
120
Pack.
qty
10
10
-1206
MDM808
8
2.5
120
10
-0109
MDM706TX
6 7 8 9 10 15
25
120
10
-1305
-1404
MDM809 MDM810
9
10
3
3-3.5
120
120
10
10
-1503
MDM815
15
3.5-4
120
10
"Teng Tools" Set of 8 pieces. Containing one screwdriver handle and 7 x 120 mm long combi-blades with one driver
tip at each end. For slotted, crosspoint and TX heads. Supplied in a plastic case.
Art. no.
11812
-0104
Teng Tools
No
MDM708
For slotted heads + crosspoint heads
0.3 x 2.0 - PH00, 0.4 x 3.0 - PH0, 0.5 x 4.0 - PH1
For cross heads
No
PZ0 - PZ1
For TX heads
No
TX5 - TX7, TX6 - TX8, TX9 - TX10
No. of sets
sts
5
242
Please quote the complete 8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Screwdrivers - Bits
Product
Screwdriver tips
type
Handle
Combi-blade
Combi-blade
Combi-blade
Combi-blade
Combi-blade
Combi-blade
Combi-blade
0.3x2.0 - PH00
0.4x3.0 - PH0
0.5x4.0 - PH1
PZ0 - PZ1
TX5 - TX7
TX6 - TX8
TX9 - TX10
Art. no.
11812
-0203
-0302
-0401
-0500
-0609
-0708
-0807
-0906
Pack.
qty
10
10
10
10
10
10
10
10
Hand tools
Teng Tools
No
MDM700
2912512
2912513
2912514
2912520
2912535
2912537
2912539
4
Art. no.
Driver thickness×driver width
Total length
Handle diameter
For Phillips heads
Total length
Handle diameter
Case dimensions
Pack.
1432
mm
mm
mm
No
mm
mm
mm
qty
-0105
0.25×1.0 0.25×1.2 0.4×1.40.5×1.8 0.5×2.4 0.6×3.0
72 78 89 93 103 113
3.5 4.0 4.5 5.0 6.0 7.0
00 0 1
93 103 103
5.0 6.0 6.0
125×75
10
Engineers Screwdrivers - round blade
Engineers screwdriver - stainless
"Wera" A quality screwdriver manufactured of stainless steel. Hardening and the screwdriver material conform to
industrial demands for breakage and rigidity as well as wear and tear.
Round blade and handle in an ergonomic design with zones of soft rubber. All screwdriver tips have been treated with
"Lasertip" which gives additional mechanical friction between the screw and screwdriver.
Art. no.
14417
-0107
-0206
-0305
-0404
-0503
-0602
-0701
Wera
No
3335
3335
3335
3335
3334
3334
3334
Blade t x width
mm
0.5x3.0
0.6x3.5
0.8x4.0
1.0x5.5
1.2x6.5
1.2x8.0
1.6x10.0
Blade length
mm
80
100
100
125
150
175
200
Handle length
mm
81
81
98
98
105
112
112
Pack.
qty
1
1
1
1
1
1
1
Workshop screwdrivers - round/hexagonal blades
Workshop screwdrivers - round/hexagonal blades
"Teng Tools" Blade of TT-MV steel. Black ergonomically designed two component handle with hanging hole.
Art. no.
7212
-0033
-0058
-0066
Teng Tools
No
MD914
MD915
MD916
Screwdriver thickness×width
mm
0.4×2.5
0.5×2.5
0.6×3.5
Blade design
Round
Round
Round
Blade length
mm
50
75
75
Handle length
mm
100
100
100
Pack.
qty
10
10
10
Art. no.
7212
-0074
-0108
-0207
Teng Tools
No
MD917
MD920
MD921
mm
0.8×4.0
0.6×3.2
0.6×3.2
Blade design
Round
Round
Round
Blade length
mm
100
75
100
Handle length
mm
100
100
100
Pack.
qty
10
10
10
Art. no.
7209-0103
7212-0306
7209-0202
Teng Tools
No
MD922
MD923
MD932
mm
1.0×5.0
1.0×5.0
1.2×6.5
Blade design
Round
Round
6-point
Blade length
mm
75
150
100
Handle length
mm
105
105
120
Pack.
qty
10
10
10
Art. no.
7209
-0251
-0277
-0301
-0400
Teng Tools
No
MD933
MD691
MD934
MD935
mm
1.2×6.0
1.2×6.5
1.2×8.0
1.6×10.0
Blade design
6-point
6-point
6-point
6-point
Blade length
mm
150
400
150
200
Handle length
mm
130
120
140
140
Pack.
qty
10
5
5
5
243
Hand tools
4
Screwdrivers - Bits
Workshop screwdrivers - hexagonal blade
Workshop screwdriver - hexagonal blade
"Teng Tools" Screwdrivers with power thru handle and striking head. The hexagonal blade allows tightening using an
open-ended spanner. Black ergonomically designed plastic handle.
Art. no.
10183
-0107
-0206
-0305
Teng Tools
No
MDT932
MDT934
MDT935
Driver thickness x wide
mm
1.4x6.0
1.4x8.0
1.4x9.5
Blade length
mm
100
150
200
handle length
mm
120
140
140
Pack.
qty
10
5
5
Model "Stubby"
Screwdriver, model Stubby
"Teng Tools" Round blade of TT-MV steel. Black ergonomically designed two component handle with hanging hole.
Art. no.
7213
-0107
Teng Tools
No
MD928
mm
1.2×6.5
Blade length
mm
38
Handle length
mm
70
Pack.
qty
10
For Phillips cross heads
Screwdriver for Phillips heads
"Wera" Lasertip - laser treated head at the driver tip for improved grip. Round, nickel-plated blade. Dimensions according to SS-ISO 8764-2. Heavy-duty Kraftform handle made of two different materials - solid plastic with rubber insert
for excellent grip.
Art. no.
7667
-0108
-0207
-0231
-0306
"Wera 350 PH" For cross heads
No
0
1
1
2
Blade length
mm
60
80
200
100
Handle length
mm
81
98
98
105
Pack.
qty
5
10
2
10
Art. no.
7667
-0330
-0348
-0405
-0504
"Wera 350 PH" For cross heads
No
2
2
3
4
Blade length
mm
200
300*
150
200
Handle length
mm
105
105
112
112
Pack.
qty
2
2
5
2
Stubby-screwdriver for Phillips heads
"Teng Tools" Model "Stubby". Round blade of TT-MV steel. Black ergonomically designed two component handle
with hanging hole.
Art. no.
7219
-0051
-0101
Teng Tools
No
MD947
MD948
For cross heads
No
1
2
Blade length
mm
38
38
Handle length
mm
70
70
Pack.
qty
10
10
For Pozidriv/Supadriv cross-heads
Screwdriver for Pozidriv/Supadriv heads
"Teng Tools" MD960 and MD961 with round blade MD972 and MD973 with hexagonal blade for tightening with a
spanner and equipped with magnetised screwdriver tip. Blade of TT-MV steel. Black ergonomically designed two component handle with hanging hole.
Art. no.
7223-0055
7223-0105
12828-0104
12828-0203
Teng Tools
No
MD960
MD961
MD962
MD964
For cross heads No
0
1
1
1
Blade length
mm
75
75
100
250
Handle length
mm
100
105
108
108
Pack.
qty
10
10
10
10
Art. no.
7223-0204
12828-0302
12828-0401
7223-0303
Teng Tools
No
MD972
MD970
MD971
MD973
For cross heads No
2
2
2
3
Blade length
mm
100
150
250
150
Handle length
mm
120
108
108
140
Pack.
qty
10
10
10
5
244
Please quote the
8 or 9 digit art. no. with all enquiries, e.g. 0001-0017 or 13674-0107.
Screwdrivers - Bits
"Wera" A quality screwdriver manufactured of stainless steel. Hardening and material selection for the screwdriver
conform to industrial demands for breakage and rigidity as well as wear and tear. Round blade and handle in an ergonomic design with zones of soft rubber. All screwdriver tips have been treated with "Lasertip" which gives additional
mechanical friction between the screw and screwdriver.
Art. no.
14419
-0105
-0204
-0303
-0403
Wera-no 3355 PZ For cross heads
No
0
1
2
3
Blade length
mm
60
80
100
150
Handle length
mm
81
98
105
112
Pack.
qty
1
1
1
-
Hand tools
Screwdriver for Pozi- and Supadriv crosspoint tips - stainless
4
Stubby-screwdriver for Pozidriv/Supadriv cross-heads
"Teng Tools" Model "Stubby". Round blade of TT-MV steel. Black ergonomically designed two component handle
with hanging hole.
Art. no.
11193
-0053
-0103
Teng Tools
No
MD968
MD978
For cross heads
No
1
2
Blade length
mm
38
38
Handle length
mm
70
70
Pack.
qty
10
10
For TX and TPX-heads
Screwdriver for TX and TPX-heads
"Teng Tools" For TX and TPX-screws with tamper-proof heads With round nickel-plated TT-MV steel blade with
"Black-Point" tip for long life. Black ergonomically designed two component handle with hanging hole.
Art. no.
0407
-0033
-0066
-0108
-0207
Teng Tools
No
MD606T
MD607T
MD608T
MD609T
TX-no
TX 6
TX 7
TX 8
TX 9
Max. head width
mm
1.70
1.99
2.31
2.5
For screw
M
2
2.5
2.5
3
Blade length
mm
75
75
75
75
Handle length
mm
100
100
100
100
Pack.
qty
10
10
10
10
Art. no.
0407
-0215
-0223
-0231
-0249
Teng Tools
No
MD610T
MD615T
MD620T
MD625T
TX-no
TX 10
TX 15
TX 20
TX 25
Max. head width
mm
2.74
3.27
3.86
4.43
For screw
M
3-3.5
3.5-4
4-5
4.5-5
Blade length
mm
100
100
100
100
Handle length
mm
105
105
105
120
Pack.
qty
10
10
10
10
Art. no.
0407
-0256
-0264
-0272
Teng Tools
No
MD627T
MD630T
MD640T
TX-no
TX 27
TX 30
TX 40
Max. head width
mm
4.99
5.52
6.65
For screw
M
4.5-6
6-7
7-8
Blade length
mm
100
100
100
Handle length
mm
120
120
120
Pack.
qty
10
10
5
Art. no.
0407
-0306
-0405
-0504
-0603
Teng Tools
No
MD610TP
MD615TP
MD620TP
MD625TP
TX-no
TPX 10
TPX 15
TPX 20
TPX 25
Max. head width
mm
2.74
3.27
3.86
4.43
For screw
M
3-3.5
3.5-4
4-5
4.5-5
Blade length
mm
100
100
100
100
Handle length
mm
105
105
120
120
Pack.
qty
10
10
10
10
Art. no.
0407
-0652
-0702
-0801
Teng Tools
No
MD627TP
MD630TP
MD640TP
TX-no
TPX 27
TPX 30
TPX 40
Max. head width
mm
4.99
5.52
6.65
For screw
M
4.5-6
6-7
7-8
Blade length
mm
100
100
100
Handle length
mm
120
120
120
Pack.
qty
10
10
5
245
Hand tools
4
Screwdrivers - Bits
For square holes
Screwdriver for square hole
"Teng Tools" Square screwdrivers (according to Robertson standard). Round TT-MV steel blade with blck tips for
long life. Ergonomically designed two component handle with hanging hole.
Art. no.
14390
-0108
-0207
-0306
Teng Tools
No
MD801
MD802
MD803
For square hole
No
1
2
3
For screw
M
6
8
10
Max. head width
mm
2.31
2.74
3.27
Length of blade
mm
100
100
100
Length of handle
mm
120
120
120
Pack.
qty
1
1
1
Magnetic block
Magnetic block
"Teng Tools" Used to magnetise screwdriver tips for holding screws, or to demagnetise tools where a magnetic force
can be a hinder.
Art. no.
6060
-0103
Teng Tools
No
MR500
Size
mm
60×30×20
Pack.
qty
20
Sets
Screwdriver set
"Teng Tools" Set of 7 screwdrivers for slotted heads as well as Phillips and Pozidriv heads. With blade of TT-MV steel.
Black ergonomically designed two component handle with hanging hole. Supplied in a plastic TC tray with removable
cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
3017
-0104
Teng Tools
No
TT917
Contents: 1 x MD920
mm
0.6x3.0x75
Contents: 1 x MD922
mm
1.0x5.5x75
Contents: 1 x MD932
mm
1.4x6.5x100
Contents: 1 x MD940 PH
No
0-75
No
1-75
No
2-100
Contents: 1 x MD 972 PZ
No
2-100
Case size LxWxH
mm
265x142x50
Weight
kg
0.7
Pack.
set
1
Screwdriver set
"Teng Tools" Set of 12 screwdrivers for slotted heads as well as Phillips and Pozidriv heads. With blade of TT-MV
steel. Black ergonomically designed two component handle with hanging hole.
Supplied in plastic case.A display supplied with the order of 10 screwdriver sets
Art. no.
4425
-0108
Teng Tools
No
MD912
Contents:
1 x MD921
mm
0.6x3.0x100
1 x MD922
mm
1.0x5.5x75
1 x MD923
mm
1.0x5.5x150
1 x MD933
mm
1.4x6.5x150
1 x MD934
mm
1.4x8.0x150
1 x MD928
mm
1.4x6.5x38
1 x MD940 PH
No
0-75
1 x MD941 PH
No
1-75
1 x MD952 PH
No
2-100
1 x MD948 PH
No
2-38
1 x MD961 PZ
No
1-75
1 x MD972 PZ
No
2-100
Weight per set
kg
1.3
No. of sets
per pack.
10
246
Please quote the
Screwdrivers - Bits
"Wera" Laser tip - laser treated head at the driver tip for improved grip. Set with 6 screwdrivers. Nickel-plated blade.
With screwdriver rack of hard plastic.
Art. no.
13261
-0106
Wera
No
335/350/355/6
Contents: 1 x No 335
mm
4.0x100
mm
5.5x125
Contents: 1 x No 350 PH
No
1-80
No
2-100
Contents: 1 x No 355 PZ
No
1-80
mm
2-100
Pack.
sts
1
Hand tools
Screwdriver set
4
Screwdriver set
"Wera" Laser tip - laser treated head at the driver tip for improved grip. Sets of 6 screwdrivers with nickel-plated
blades. Black plastic Kraftform handle. With screwdriver rack of hard plastic.
Art. no.
2810
-0204
-0303
Wera
No
334/6
334/355/6
mm
0.5×3.0-80
0.5×3.0-80
mm
0.8×4.0-100
0.8×4.0-100
mm
1.0×5.5-125
1.0×5.5-125
mm
1.2×6.5-150
1.2×6.5-150
No
1-80
No
2-100
No
1-80
No
2-100
Pack.
set
1
1
Screwdriver set - TX
"Teng Tools" Set of 7 TX/TPX screwdrivers (2 standard TX and 5 with hole TPX). For internal TX heads.
Nickel plated blades of TT-MD steel. Handle made of two component with hanging hole. Fit in Teng Tools tool boxes
and tool trolleys. Supplied in a plastic TC tray with removable cover.
Art. no.
2598
-0103
Teng Tools
No
TT917TX
Contents: 1 x MD608T
TX 8x75
Contents: 1 x MD609T
TX 9x75
Contents: 1 x MD610TP
TPX 10x100
TPX 15x100
TPX 20x100
TPX 25x100
TPX 30x100
Case size LxWxH
mm
265x142x50
Weight
kg
1.15
Pack.
set
1
1000-volts screwdrivers
Electricians screwdriver
"Teng Tools" Insulated screwdrivers. Manufactured according to the standard EN 60900 for work under voltage up
to 1000 volt (by qualified electricians).
Art. no.
11751
-0107
-0206
-0305
-0404
-0503
Teng Tools
No
MDV820
MDV822
MDV824
MDV826
MDV828
Blade t x width
mm
0.4x2.5
0.5x3.0
0.8x4.0
1.0x5.5
1.2x6.5
Blade length
mm
75
100
100
125
150
handle length
mm
175
200
210
230
98
Pack.
qty
10
10
10
10
10
Insulated screwdriver for Phillips heads
Art. no.
11752
-0106
-0205
-0304
-0403
Teng Tools
No
MDV840
MDV842
MDV844
MDV846
For cross heads No
0
1
2
3
Blade length
mm
60
80
100
150
handle length
mm
160
185
225
290
Pack.
qty
10
10
10
5
247
Screwdrivers - Bits
Insulated screwdriver for combi slots
Hand tools
4
Insulated combi screwdriver mainly for screws with both slotted and cross heads PZ2. Manufactured according to the
standard EN 60900 for work under voltage up to 1000 volt (by qualified electricians).
Art. no.
14415
-0109
For combi slots
slotted head/PZ2
Blade length
mm
100
Handle length
mm
95
Pack.
qty
1
Screwdriver for Pozidriv/Supadriv heads
Art. no.
11753
-0105
-0204
-0303
-0402
Teng Tools
No
MDV860
MDV862
MDV864
MDV866
For cross heads mm
0
1
2
3
Blade length
mm
60
80
100
150
handle length
mm
160
185
185
290
Pack.
qty
10
10
10
5
Screwdriver set for 1000 volt
"Teng Tools" Set containing 7 insulated screwdrivers with slotted heads, Phillips and Pozidriv heads. Manufactured
according to the standard EN 60900 for work under voltage up to 1000 volt (by qualified electricians).One display supplied with the order of 5 sets of screwdrivers.
Art. no.
13219
-0109
Teng Tools
No
MDV907P
Contents:Screwdriver MDV820
mm
0.4x2.5-75
Screwdriver MDV824
mm
0.8x4-100
Screwdriver MDV826
mm
1.0x5.5-125
Screwdriver MDV840 PH
No
0-60
No
1-80
No
2-100
Screwdriver MDV864 PZ
No
2-100
Weight
kg
Pack.
qty
10
Sets
Screwdriver set
"Teng Tools" Set of 12 pieces. Contains one screwdriver handle and 11 separate reversible screwdriver blades with
a screwdriver tip at each end.
Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
12865
-0108
Teng Tools
No
TTMD12D
No. of pieces
ea.
12
Combi-blade
PH1 x PH2
Combi-blade
flat 4.0 mm x 5.5 mm
Combi-blade
PH1 x 6.5 mm flat
Combi-blade
PZ1 x PZ2
Combi-blade
TX10 x TX15
Combi-blade
TX20 x TX25
Combi-blade
TX30 x TX40
Combi-blade
hex. 3 mm x 3 mm hex with ball point
Combi-blade
Combi-blade
Combi-blade
Insert size LxWxH
mm
265x142x50
Weight
kg
0.25
Pack.
sts
1
Impact screwdrivers
Impact screwdriver
"Teng Tools" Set of 15 pieces. Reversible action. Driver designed with ½" square-drive, but is also equipped with a
chuck in which bits with 5/16"-hex-drive can be fitted. With adaptor 5/16"hex-3/8"square, chuck ½"square-5/16"hex
and12 different bits. Supplied in metal case.
Art. no.
7266
-0103
Teng Tools
No
ID 515
For bits with drive
hex-inch
5/16
Bits for slotted heads
mm
1.4×6 1.4×82.2×10 1.8×12
Bits for Phillips heads
No
1234
Bits hex type bits
mm
4568
Adaptor drive
inch
½-3/8
Separate bit set
7266
-0202
248
Please quote the
Screwdrivers - Bits
Bits for impact screwdrivers
"Teng Tools" Bits with 5/16" hex drive. Length 36 mm.
Art. no.
Teng Tools
No
11648-0104
910504
11648-0203
910505
11648-0302
910506
11648-0401
910508
11648-0500
940006
11648-0609
940008
11648-0708
940010
11648-0807
940012
11648-0906
930001
11648-1003
930002
11648-1102
930003
11648-1201
930004
13223-0103
920001
13223-0202
920002
13223-0301
920003
14987-0107
970030
14987-0206
970040
14987-0305
970045
14987-0404
970050
14987-0503
970055
For screw
with
4 mm hex holes
5 mm hex holes
6 mm hex holes
8 mm hex holes
6 mm slotted head
8 mm slotted head
10 mm slotted head
12 mm slotted head
No 1 Phillips head
No 2 Phillips head
No 3 Phillips head
No 4 Phillips head
No 1 Pozidriv cross head
TX30 for TX-head
TX40 for TX-head
TX45 for TX-head
TX50 for TX-head
TX55 for TX-head
Pack.
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
-
Hand tools
Bits for impact screwdrivers
4
Bit screwdrivers
Bit screwdriver
"Teng Tools" Blade designed as ¼"-hex socket with magnet that holds the bits and screws. Hex chrome vanadium
steel blade. Plastic handle with hanging hole.
Art. no.
10024
-0100
Teng Tools
No
MD900
For bits with drive
hex-inch
¼
Blade length / Handle length
mm
100 / 120
Pack.
qty
5
Bit screwdriver
"Teng Tools" Blade designed with ¼"-hex socket with recessed magnet that holds the bits as well as the screw. Plastic
handle with space for bits.
Supplied with six bits; two for slotted heads, two for Phillips heads and two for Pozidriv heads. Rotating flip lid.
Art. no.
7257
-0104
Teng Tools
No
MD907
For bits with drive
hex-inch
¼
mm
100 / 115
mm
1.2×5 1.4×7
Bits for Phillips-heads
No
12
Bits for Pozidriv-heads
No
12
Förp.
set
10
Bit screwdriver
"Teng Tools" Blade designed with ¼"-hex socket with recessed magnet that holds the bits as well as the screw. Plastic
handle with space for bits. Supplied with 6 bits for internal TX heads.
Art. no.
10191
-0107
Teng Tools
No
MD907TX
For bits with drive
hexinch
¼
mm
100 / 120
Bits for TX heads
TX10 15 20 25 27 30
Pack.
set
10
Bit ratchet drivers
Bit ratchet driver
"Teng Tools" Bit ratchet driver with two component handle and 6 screwdriver bits (two for slotted heads, two for
Phillips heads, 2 for Posidrive heads) stored in the handle.
Art. no.
14432
-0108
Teng Tools
No
MD907R
mm
1.2x5, 1.4x7
Bits for Phillip heads
No
1, 2
Bits for Pozidriv heads
No
1, 2
Pack.
sts
5
249
Hand tools
4
Screwdrivers - Bits
Bit ratchet handles
Ratcheting bit driver
"Teng Tools" ¼" ratcheting bit driver and 8 mm 12 point ring spanner. Hardened. Manufactured of chrome vanadium
steel. Satin finish.
Art. no.
11834
-0108
Teng Tools
No
1400B
With bit drive
inch
¼"
Ring spanner
mm
8
Length
mm
90
Pack.
qty
10
Bit ratchet set
Bit ratchet set
"Teng Tools" Set containing ratchet handle with ¼"-hex drive for bits. Adjustable for right and left-hand action. Supplied complete with 11 different bits.
Art. no.
0477
-0103
Teng Tools
No
SD511
Drive
inch
¼-hex
Ratchet handle length
mm
100
mm
0.4×4 1.0×5.5
No
12
Bits for Pozi/Supadriv heads
No
12
Bits for TX-heads
TX
10 15 20
Bits for hex holes
mm
56
Pack.
qty
30
Bit holder for 11 bits
0477
-0202
Teng Tools
No
PR-11BOOT
Pack.
qty
1
For drilling-machine
Bits for drills
"Teng Tools" Set of three double ended screwdriver blades for portable drills with variable speed. Each blade has a
slotted head at one end and a crosspoint tip at the other. Hexagonal shank for the drill chuck.
Art. no.
9661
-0100
Teng Tools
No
FP50AB03
Drive diam, hex
mm
6
For slotted heads
mm
0.6×4.5 0.8×5.5 1×7
For Phillips heads
No
123
Length
mm
50
Pack.
set
10
Bit holder - with magnet
Bit holder - with magnet
"Teng Tools" Recessed magnet holds the bits as well as the screw. With ¼"-hex-drive.
Art. no.
10616
-0104
-0203
Teng Tools
No
ACC50MBH01
ACC70MBH01
For bits
¼"
¼"
Design (machine drive)
4
4
Length
mm
50
70
Pack.
qty
10
10
Bit holder - with quick release chuck
Bit holder - with quick release chuck
"Teng Tools" Bit holder with quick release chuck. Recessed magnet that holds the bits as well as the screw. With ¼"hex-drive.
Art. no.
10617
-0103
Teng Tools
No
ACC50CBH01
4
For bits hex
inch
¼
Length
mm
50
Pack.
qty
10
250
Please quote the
Screwdrivers - Bits
"Wera" Bit holder with quick release chuck that releases the magnet when replacing the bits, which facilitates the replacement of small bits and the new sleeve with slide bearing makes it possible to hold the chuck while tightening. This
reduces the risk of scraping in confined areas.
Art. no.
12292
-0101
Wera Rapidator
No
889/4/1 K
No
4
For bitshex
inch
¼
Length
mm
50
Pack.
qty
1
Hand tools
Bit holder
4
Bit holder
"Wera" Bit holder with quick release chuck
Art. no
13946
Wera Rapidator
No
For bitshex
inch
Length
mm
Pack
qty
-0109
887/4 RR
¼
57
1
Bit holder with quick release chuck
Bit extension suitable when screwing in ceilings, etc. Journalled outer casing means that you can hold and guide the extension while working. Bits Phillips no 2 supplied. Bits with minimum length 50 mm must be used.
Art. no.
12306
-0105
For bits hex (minimum length 50 mm)
inch
¼
Total length
mm
450
Pack.
qty
1
Square drives
Square drive for sockets
"Teng Tools" For use with standard impact sockets, etc. Designed for attachment in machines according to drive 4.
Art. no.
10618
-0102
-0201
-0300
Teng Tools
No
ACCSDA1414
ACCSDA1438
ACCSDA1412
Drive design. (machine drive)
hex-inch
4-¼
4-¼
4-¼
Square drive
square-inch
¼
3/8
½
Total length
mm
50
50
50
Quantity
qty
10
10
10
Hex adaptors
Hex adaptors
"Teng Tools" Adaptor with hex drive for mounting in a drill chuck and with external square-drive for sockets at the
other end.
Art. no.
11711
-0106
-0205
Teng Tools
No
M140037
M380037
Hexagonal drive
hexinch
¼
¼
Square drive
square-inch
¼
3/8
Quantity
qty
10
10
Bit sockets
Bit socket. With ¼" square-drive.
"Teng Tools" With 6-point opening for¼" or 5/16" screwdriver bits. Chrome vanadium steel. Satin finish.
Art. no.
3563-0102
3581-0100
3581-0209
Teng Tools
No
M140060
M380060
M120060
Drive square
tum
¼
3/8
½
For bits hex
inch
¼
¼
5/16
Length
mm
25
25
25
Pack.
qty
10
10
10
Bit socket
"Teng Tools" With 10 or 12 mm hex drive for Teng Tools bits.
Art. no.
10167
-0057
Teng Tools
No
M380061
Drive square
inch
3/8
For bits med hex drive
mm
10
Length
mm
28
Pack.
qty
10
-0107
M120061
½
10
38
10
-0206
M120062
½
12
38
10
251
Hand tools
4
Screwdrivers - Bits
"Teng Tools" Standard bits for slotted heads. With ¼"-hex-drive.
Art. no. 3-pack
10604
-0108
Teng Tools
No
FL2506A03
Driver thickness.xwidth
mm
0.6x3.5
Length
mm
25
Number of bits per pack.
pack.
3
Quantity
qty
10
Art. no. 3-pack
10604
-0405
Teng Tools
No
FL2508B02
mm
0.8x5.5
Length
mm
25
pack.
3
Quantity
qty
10
Art. no. 3-pack
10604
-0702
Teng Tools
No
FL2516A03
mm
1.6x8.0
Length
mm
25
Number of bits per
pack.
3
Quantity
qty
10
-0207
FL2506B03
0.6x4.5
25
3
10
-0504
FL2510A03
1.0x5.5
25
3
10
-0306
FL2508A03
0.8x4.0
25
3
10
-0603
FL2512A03
1.2x6.5
25
3
10
Bits for slotted heads - stainless
"Wera" Torsion. A quality bit made of stainless steel. Hardening and material selection for the bits conform to
industrial demands for breakage and rigidity as well as wear and tear. With ¼" hex-drive.
Art. no.
14427
-0105
-0204
-0303
Wera-no 3800/1 TSDriver thickness x width
mm
0.8x5.5
1.0x5.5
1.2x6.5
Length
mm
25
25
25
Pack.
qty
1
1
1
Long bits - for slotted heads
"Teng Tools" Long bits for slotted heads. With ¼"-hex-drive.
Art. no.
10605
-0107
-0206
-0305
-0404
-0503
Teng Tools
No
FL5006A03 FL5008A3
FL5008B03 FL5010A03 FL5012A03
Driver thickness×width
mm
0.6x3.5
0.8x4.0
0.8x5.5
1.0x5.5
1.2x6.5
Number of bits per
pack.
3
3
3
3
3
Quantity
qty
10
10
10
10
10
Art. no.
10605
-1006
-1105
-1204
-1303
Teng Tools
No
FL7006A02
FL7008A02
FL7008B02
FL7010A02
Driver thickness×width
mm
0.6x3.5
0.8x4.0
0.8x5.5
1.0x5.5
Number of bits per
pack.
2
2
2
2
Quantity
qty
10
10
10
10
"Teng Tools" Standard bits for Phillips heads. With ¼"-hex-drive.
Art. no. 3-pack
10606
-0106
Teng Tools
No
PH2500103
Phillips-head
No
1
Length
mm
25
3
Quantity
qty
10
Ditto 10-pack
10606
-0403
Teng Tools
No
PH2500110
10
Quantity
qty
10
-0205
PH2500203
2
25
3
10
-0502
PH2500210
10
10
-0304
PH2500303
3
25
3
10
-0601
PH2500310
10
10
Bits for Phillips heads - stainless
industrial demands for breakage and rigidity as well as wear and tear. with ¼" hex-drive.
Art. no.
14425
-0107
-0206
-0305
Wera-no 3851/1 TS Phillips-head
No
1
2
3
Length
mm
25
25
25
Pack.
qty
1
1
1
"Teng Tools" With machined throat. For Phillips heads according to the American standard (shallower hole).
Also fits in heads according to the European standard. with ¼" hex-drive.
Art. no. 10-pack.
10628
-0100
252
Please quote the
Screwdrivers - Bits
No
No
mm
qty
10628
No
No
mm
qty
GR25002010
2
25
10
-1009
GR250020100
2
25
1
Hand tools
Teng Tools
Phillip cross-head
Length
Pack.
Ditto 100-pack
Teng Tools
Phillips cross head
Length
Pack.
4
Long Bits for Phillips heads
"Teng Tools" Long bits for Phillips heads. With ¼"-hex-drive.
Art. no.
10607
-0105
-0204
Teng Tools
No
PH5000103
PH5000203
Phillips head
No
1
2
Number of bits per pack
3
3
Pack.
qty
1
1
Art. no.
10607
-0402
Teng Tools
No
PH7000102
Phillips head
No
1
Number of bits per
pack.
2
Pack.
qty
10
-0303
PH5000303
3
3
10
-0501
PH7000202
2
2
10
Bits for Pozidriv and Supadriv heads
Bits for Pozidriv and Supadriv heads
"Teng Tools" Standard bits for Pozidriv and Supadriv heads. With ¼"-hex-drive.
Art. no. 3-pack
10608
-0104
-0203
Teng Tools
No
PZ2500103
PZ2500203
Pozidriv head
No
1
2
3
3
Pack.
qty
10
10
Ditto 10-pack
10608
-1003
-1102
Teng Tools
No
PZ2500110
PZ2500210
10
10
Pack.
qty
10
10
-0302
PZ2500303
3
3
10
-1201
PZ2500310
10
10
Bits for Pozidriv and Supadriv crosspoint tip - stainless
Art. no.
14424
-0108
-0207
-0306
Wera-no 3855/1 TS Posidriv-slot
No
1
2
3
Length
mm
25
25
25
Pack.
qty
1
1
10
Long Bits for Pozidriv- and Supadriv heads
"Teng Tools" Long bits for Pozidriv and Supadriv heads. With ¼"-hex-drive design 4.
Art. no.
10609
-0103
-0202
Teng Tools
No
PZ5000103
PZ5000203
Pozidriv head
No
1
2
3
3
Pack.
qty
10
10
Art. no.
10609
-0400
Teng Tools
No
PZ7000102
Pozidriv
No
1
Number of bits per
pack.
2
Pack.
qty
10
-0301
PZ5000303
3
3
10
-0509
PZ7000202
2
2
10
Bits for hexagonal holes
"Teng Tools" Standard bits for hex holes. With ¼"-hex-drive.
Art. no. 3-pack
10610
-0100
-0209
Teng Tools
No
HEX2500203
HEX2500303
For hex holes
mm
2
3
Length
mm
25
25
Number of bits per
pack.
3
3
Pack.
qty
1
1
Ditto 10-pack
10610
Teng Tools
No
Number of bits per
pack.
-
-0308
HEX2500403
4
25
3
1
-1207
HEX2500410
10
-0407
HEX2500503
5
25
3
1
-
-0506
HEX2500603
6
25
3
1
-
-0605
HEX2500803
8
25
3
1
253
Hand tools
4
Screwdrivers - Bits
"Teng Tools" Hex type bits.
Art. no.
"Teng Tools 2107" For hex holes
Drive hex
Length
Pack.
Art. no.
Drive hex
Length
Pack.
10186
mm
mm
mm
qty
10186
mm
mm
mm
qty
-0104
5
10
40
10
-0609
10
10
40
10
-0203
6
10
40
10
-0708
12
12
40
10
-0302
7
10
40
10
-0807
14
12
40
10
-0401
8
10
40
10
-0906
17
12
40
10
-0500
9
10
40
10
-1003
19
12
40
10
Bits for hexagonal holes - stainless
"Wera" Hex-Plus. Torsion. A quality bit made of stainless steel. Hardening and material selection for the bits
conform to industrial demands for breakage and rigidity as well as wear and tear. with ¼" hex-drive.
Art. no.
14426
-0106
-0205
-0304
-0403
Wera-no 3840/1 TS for hexagonal holes
mm
1.5
2
2.5
3
Length
mm
25
25
25
25
Pack.
qty
1
1
1
1
Art. no.
14426
-0502
-0601
-0706
Wera-no 3840/1 TS for hexagonal holes
mm
4
5
6
Length
mm
25
25
25
Pack.
qty
1
1
-
"Wera" Hex type bits. With ballpoint hexagonal heads - which permits turning at a 30° angle. With ¼" hex-drive.
Art. no.
6073
-0306
-0405
-0504
Wera-no 842/1 Z For hex holes
mm
4
5
6
Length
mm
25
25
25
Pack.
qty
10
10
10
Bits for hex holes
"Teng Tools" Long hex bits. With ¼"-hex-drive.
Art. no.
10611
-0109
Teng Tools
No
HEX5000403
For hex holes
mm
4
Number of bits per
pack.
3
Pack.
qty
10
-0208
HEX5000503
5
3
10
-0307
HEX5000603
6
3
10
-0406
HEX5000803
8
3
10
"Teng Tools" Long hex bits.
Art. no.
Drive hex
Length
Pack.
Art. no.
Drive hex
Length
Pack.
10188
mm
mm
mm
qty
10188
mm
mm
mm
qty
-0102
5
10
75
10
-0607
10
10
75
10
-0201
6
10
75
10
-0706
12
12
75
10
-0300
7
10
75
10
-0805
14
12
75
10
-0409
8
10
75
10
-0904
17
12
75
10
-0508
9
10
75
10
-1001
19
12
75
10
Bits for TX heads
Bits for Torx-heads - stainless
Art. no.
14423
-0109
-0208
-0307
-0406
-0505
Wera 3867/1 TS
No
TX 8
TX 9
TX 10
TX 15
TX 20
Max. head width
mm
2.31
2.5
2.74
3.27
3.86
For screw
M
2.5
3
3-3.5
3.5-4
4-5
Length
mm
25
25
25
25
25
Pack.
qty
1
1
1
1
1
Art. no.
14423
-0604
-0703
-0802
-0701
Wera 3867/1 TS
No
TX 25
TX 27
TX 30
TX 40
Max. head width
mm
4.43
4.99
5.52
6.65
For screw
M
4.5-5
4.5-6
6-7
7-8
Length
mm
25
25
25
25
Pack.
qty
1
1
1
-
254
Please quote the
Screwdrivers - Bits
"Teng Tools" Standard bits for internal TX heads. With ¼"-hex-drive.
Art. no. 3-pack
10612
-0108
-0207
-0306
Teng Tools
No
TX2500603 TX2500703 TX2500803
TX heads
No
TX6
TX7
TX8
Max. head width
mm
1.70
1.99
2.31
For screw
M
2
2.5
2.5
Length
mm
25
25
25
3
3
3
Pack.
qty
10
10
10
Art. no. 3-pack
10612
-0702
-0801
-0900
Teng Tools
No
TX250203 TX2502503 TX2502703
TX heads
No
TX20
TX25
TX27
Max. head width
mm
3.86
4.43
4.99
For screw
M
4-4.5
4.5-5
4.5-6
Length
mm
25
25
25
3
3
3
Pack.
qty
10
10
10
Ditto 10-pack
10612
-2609
Teng Tools
No
TX2502010 Number of bits per pack.
10
Pack.
qty
1
-
-0405
TX2500903
TX9
2.50
3
25
3
10
-1007
TX2503003
TX30
5.52
6-7
25
3
10
-2906
TX2503010
10
1
-0504
TX2501003
TX10
2.79
3-3.5
25
3
10
-1106
TX250403
TX40
6.65
7-8
25
3
10
-
-0603
TX2501503
TX15
3.27
3.5-4
25
3
10
Hand tools
Bits for TX heads
4
Bits for TX heads
"Teng Tools" 100-pack. Standard bits for internal TX heads. With ¼"-hex-drive.
Art. no.
10969
-0107
-0206
-0305
-0404
Teng Tools
No
TX2501501B TX2502001B TX2502501B TX2503001B
TX head
No
TX15
TX20
TX25
TX30
Max. head width
mm
3.27
3.86
4.43
5.52
For screw
M
3.5-4
4-4.5
4.5-5
6-7
Length
mm
25
25
25
25
100
100
100
100
Pack.
qty
1
1
1
1
-0503
TX2504001B
TX40
6.65
7-8
25
100
1
Bits for TX heads
"Teng Tools" For internal TX heads.
Art. no.
"Teng Tools 2207"
Max. head width
For screw
Drive hex
Length
Pack.
Art. no.
"Teng Tools 2207"
Max. head width
For screw
Drive hex
Length
Pack.
10187
No
mm
M
mm
mm
qty
10187
No
mm
M
mm
mm
qty
-0103
TX 20
3.86
4-5
10
40
10
-0608
TX 45
7.82
8-10
10
40
10
-0202
TX 25
4.43
4.5-5
10
40
10
-0707
TX 50
8.83
10
10
40
10
-0301
TX 27
4.99
4.5-6
10
40
10
-0806
TX 55
11.25
12
10
40
10
-0400
TX 30
5.52
6-7
10
40
10
-0905
TX 60
13.25
14
12
40
10
-0509
TX 40
6.65
7-8
10
40
10
-1002
TX 70
15.25
16
12
40
10
Bits for TX heads
"Teng Tools" TX-bits with hole. For tamper proof screws. For internal TX heads. With ¼"-hex-drive.
Art. no. 3-pack
10614
-0106
-0205
-0304
-0403
Teng Tools
No
TPX2501003
TX2501503
TPX2502003
TPX2502503
TX head
No
TPX10
TPX15
TPX20
TX 25
Max. head width
mm
2.79
3.27
3.86
4.43
For screw
M
3-3.5
3.5-4
4-4.5
4.5-5
Length
mm
25
25
25
25
3
3
3
3
Pack.
qty
10
10
10
10
Art. no. 3-pack
10614
-0502
-0601
-0700
Teng Tools
No
TPX2502703
TPX2503003
TPX2504003
TX head
No
TPX27
TPX30
TPX40
Max. head width
mm
4.99
5.52
6.65
For screw
M
4.5-6
6-7
7-8
Length
mm
25
25
25
3
3
3
Pack.
qty
10
10
10
255
Hand tools
4
Screwdrivers - Bits
Long bits for TX heads
"Teng Tools" Long bits for internal TX heads. With ¼"-hex-drive.
Art. no.
10613
-0107
-0206
Teng Tools
No
TX5000803
TX5001003
TX head
No
TX8
TX10
Max. head width
mm
2.31
2.79
For screw
M
2.5
3-3.5
3
3
Pack.
qty
10
10
Art. no.
10613
-0503
-0602
Teng Tools
No
TX5002503
TX5002703
TX head
No
TX25
TX27
Max. head width
mm
4.43
4.99
For screw
M
4.5-5
4.5-6
3
3
Pack.
qty
10
10
Art. no.
10613
-0800
-0909
Teng Tools
No
TX7001002
TX7001502
TX head
No
TX10
TX15
Max. head width
mm
2.79
3.27
For screw
M
3-3.5
3.5-4
Number of bits per
pack.
2
2
Pack.
qty
10
10
-0305
TX5001503
TX15
3.27
3.5-4
3
10
-0701
TX5003003
TX30
5.52
6-7
3
10
-1006
TX700202
TX20
3.86
4-4.5
2
10
-0404
TX5002003
TX20
3.86
4-4.5
3
10
-1105
TX7002502
TX25
4.43
4.5-5
2
10
Long bits for TX heads
"Teng Tools" For internal TX-heads.
Art. no.
10189
"Teng Tools 2208"
No
Max. head width
mm
For screw
M
Drive hex
mm
Length
mm
Pack.
qty
Art. no.
10189
"Teng Tools 2208"
No
Max. head width
mm
For screw
M
Drive hex
mm
Length
mm
Pack.
qty
-0101
TX 20
3.86
4-5
10
75
1
-0606
TX 45
7.82
8-10
10
75
1
-0200
TX 25
4.43
4.5-5
10
75
1
-0705
TX 50
8.83
10
10
75
1
-0309
TX 27
4.99
4.5-6
10
75
1
-0804
TX 55
11.22
12
10
75
1
-0408
TX 30
5.52
6-7
10
75
1
-0903
TX 60
13.25
14
12
75
1
-0507
TX 40
6.65
7-8
10
75
1
-1000
TX 70
15.55
16
12
75
1
Bits for square recessed heads
Bits for square recessed heads
"Teng Tools" Standard bits for Robertson square recessed heads. With ¼"-hex-drive.
Art. no. 3-pack
10615
-0105
-0204
Teng Tools
Nr
ROB2500103
ROB2500203
Max. head width
mm
2.31
2.74
For square recessed heads
No
1
2
For screw
M
6
8
Length
mm
25
25
Number of bits per
pack.
3
3
Pack.
qty
10
10
-0303
ROB2500303
3.27
3
10
25
3
10
Bit holder with magnet
Bits cassette, bit holder with magnet
"Teng Tools" Plastic cassette containing bit holder with magnet and 9 bits (length 25 mm) with ¼" hexdrive. A display
supplied with the order of 10 bits cassettes.
Art. no.
10262
-0101
Teng Tools
No
BBX10A
No. of pieces
ea.
10
mm
0.6x4.5 1.0x5.5 1.2x6.5
No
123
Bits for Pozi/Supadriv heads
No
123
Pack.
qty
10
256
Please quote the
Screwdrivers - Bits
"Teng Tools" Plastic cassette containing bit holder with magnet and 6 bits (length 25 mm) with ¼" hexdrive for internal TX-heads. A display supplied with the order of 10 bits cassettes.
Art. no.
10263
-0100
Teng Tools
No
BBX7TXA
No. of pieces
ea.
7
Bits for TX-heads
TX
10 15 20 25 30 40
Pack.
qty
10
Hand tools
4
"Teng Tools" Plastic cassette containing bit holder with magnet and 9 bits (length 25 mm) ¼" hex-drive.
Art. no.
14397
-0101
Teng Tools
No
BBX10TX
No of parts
qty
10
Bits for TX heads
TX
10 (2), 15 (2), 20 (2), 25 (2), 30 (1)
Pack.
set
10
Bit holder with quick release chuck
Bits cassettes - bit holder with quick release chuck
"Wera" Store display containing 20 bits cassettes 8400-9/BTZ.
Art. no.
6096
Wera
No
No. of cassettes
Pack.
qty
-1000
8400-9/BTZ-20
20
1
Bits cassette - with stainless bits
"Wera" Rapidaptor. Plastic cassette containing bit holder with ring magnet and quick release chuck. The magnet is
released to simplify changing the bit. Also includes 9 quality bits made of stainless steel. Hardening and material selection for the bits conform to industrial demands for breakage and rigidity as well as wear and tear.
Art. no.
14428
-0104
Wera
No
BC 10/9 SB
With bit holder
No
3888/4/1 K
No
2
Bits for posidriv crosspoint tip
No
1 (1), 2 (2)
Bits for TX heads
No
TX 10, TX 15, TX 20, TX 25; TX 30
Pack.
qty
1
Bit sets
Bit set
"Teng Tools" Socket and bit set containing 19 pieces. Contains 6 x 1/4 " sockets, 10 x bits for different screw heads,
magnetic bit holder, hex adapter ¼" hex-¼" square and a mini ratchet handle. A display is supplied with the order of 5
bits boxes.
Art. no.
13193
-0109
Teng Tools
No
BBX19
No. of pieces
ea.
19
Sockets dim (hexagon)
mm
8 9 10 11 12 13
mm
4.5 5.5 6.5
No
12
No
12
Bits for int. hex holes
mm
456
Case dim. LxWxH
mm
100x66x30
Weight
kg
0.22
Pack.
qty
5
Socket/Bit set
"Teng Tools" Combined sockets/bit set. Contains 7 ¼" 6-point sockets. 11 bits and bit holder, adaptor ¼" hex - ¼"
square and a bit ratchet handle. Supplied in plastic case. A display supplied with the order of 5 bits cassettes.
Art. no.
12845
-0103
Teng Tools
No
BBX20
No. of pieces
ea.
20
Sockets with ¼" square-drive
mm
5.5 6 7 8 10 12 13
mm
0.6x4.5 0.8x5.5 1.2x6.5
No
12
No
12
Bits for TX-heads
No
TX10 TX15 TX20
Pack.
set
5
257
Spanners
Bit set
Hand tools
4
"Teng Tools" Set containing bit holder with quick chuck, hex adaptor and the 26 most common bits. All bits with ¼"hex drive. Supplied in plastic case. A display supplied with the order of 5 bits cassettes.
Art. no.
12199
-0105
Teng Tools
No
BBX28
No. of pieces
ea.
28
mm
0.6x4 0.8x5.5 1.0x6.5
No
123
Bits for Pozidriv/Supadriv heads
No
123
Bits for TX heads
TX
10 15 20 25 30 40
Bits for TX heads
TPX
20 25 30
Bits for Robertson heads
No
123
Bits for hex holes
mm
456
Bits for Grabber heads
No
2 (2)
Bit holder ¼"-hex, length
mm
50
Hex adaptor
inch
¼"-hex-¼"square
Pack.
qty
5
Bit set
"Teng Tools" Set includes magnetic bit holder, hex adapter, forged ratcheting bit driver and the 26 most common
bits. All bits with ¼"-hex drive. Supplied in plastic case. A display supplied with the order of 5 bits cassettes.
Art. no.
11860
-0105
Teng Tools
No
BBX29
No. of pieces
ea.
29
mm
0.6x4.5 0.8x5.5 1.2x6.5
No
123
Bits for Pozidriv/Supadriv cross heads
No
123
Bits for TX-heads
TX
10 15 20 25 30 40
Bits for TX-heads
TPX
20 25 30
No
123
Bits for hex holes
mm
456
Grabber-bits
No
456
Bit holder, length
mm
50
Hex adaptor
inch
square-¼"-¼"-hex
Ratcheting bit driver
hex¼" - 8 mm
Weight
kg
0.2
Pack.
qty
5
Spanners
Open ended spanners
Open ended spanner
258
"Gedore" Single. Dimensions according to DIN 894. Angle 15°. Forged of special steel and hardened.
6-38 mm=phosphatized, 41-115 mm = steel grey. Sizes 10-32 mm with hole for hanging.
Art. no.
1021
-0102 -0201 -0300 -0409 -0508 -0607 -0706 -0805
"Gedore 894" Size mm
6
7
8
9
10
11
12
13
Length
mm
75
180
95
100
105
110
125
130
Jaw thickness
mm
3.2
3.2
3.2
4
4.5
5
5
5.5
Pack.
qty
10
10
10
10
10
10
10
10
Art. no.
1021
-1001 -1100 -1209 -1258 -1308 -1407 -1506 -1555
15
16
17
18
19
22
24
25
Length
mm
145
155
160
160
170
195
215
215
Jaw thickness
mm
5.5
5.5
6
6
7
8
9
9
Pack.
qty
10
10
10
10
10
10
10
10
-0904
14
140
5.5
10
-1605
27
240
10
10
Larger sizes see next page.
Art. no.
1021
Length
mm
Jaw thickness
mm
Pack.
qty
Art. no.
1021
Length
mm
Jaw thickness
mm
Pack.
qty
-2306
55
460
17
1
-3205
100
800
26
1
Please quote the
-1704
30
260
11
10
-2405
60
495
18
1
-1803
32
275
12
10
-2504
65
530
19
1
-1852
34
290
12.5
1
-2603
70
575
20
1
-1902
36
305
13
1
-2702
75
610
21
1
-1951
38
305
13
1
-2801
80
645
22
1
-2009
41
345
14
1
-2900
85
690
23
1
-2108
46
380
15
1
-3007
90
740
25
1
-2207
50
415
16
1
-3106
95
740
25
1
Spanners
"Teng Tools" Double. Chrome vanadium steel. Dimensions according to DIN 3110/ISO 3318. Angle 15°. Satin finish.
Art. no.
10170
-0102
-0201
-0300
-0409
-0508
-0607
Teng Tools
No
620607
620809
621011
621213
621415
621617
Sizes
mm
6x7
8x9
10x11
12x13
14x15
16x17
Length
mm
123
140
156
172
189
204
Spanner thickness mm
3.7
4.0
5.0
5.5
5.9
6.3
Pack.
qty
10
10
10
10
10
10
Art. no.
10170
-0706
-0805
-0904
-1001
-1100
Teng Tools
No
621819
622022
622123
622427
623032
Sizes
mm
18x19
20x22
21x23
24x27
30x32
Length
mm
221
237
247
263
298
Spanner thickness mm
6.7
7.1
7.7
8.1
9.0
Pack.
qty
10
5
5
5
5
Hand tools
Open ended spanners
4
Open ended spanner
"Gedore" Double - with the same dimension at both ends. Of chrome vanadium steel. Angle 15×85°. Chromium plated, with ground heads.
Art. no.
1035
-0106
-0205
-0304
-0403
-0502
-0601
-0700
"Gedore 8"Size
mm
4
4.5
5
5.5
6
7
8
Length
mm
70
70
78
78
78
91
96
Jaw thickness
mm
3.2
3.2
3.2
3.2
3.2
3.2
3.2
Pack.
qty
10
10
10
10
10
10
10
Art. no.
1035
-0809
-0908
-1005
-1104
-1203
-1302
"Gedore 8"Size
mm
9
10
11
12
13
14
Length
mm
103
105
116
116
131
131
Jaw thickness
mm
3.2
3.2
3.2
3.8
3.8
4
Pack.
qty
10
10
10
10
10
10
Sets
Open ended spanner set
"Teng Tools" Sets with double, open ended spanners. Chrome vanadium steel. Dimensions according to DIN 3110/
ISO 3318. Satin finish. Supplied in a box.
Art. no.
11197
-0109
-0208
Teng Tools
No
DO6207
DO6211
No. of spanners
7
11
Sizes
mm
6×7 8×9 10×11 12×13 14×15
6×7 8×9 10×11 12×13 14×15 16×17
16×17 18×19
18×19 20×22 21×23 24×27 30×32
Pack.
sts
1
1
"Teng Tools" Double, open ended spanners in set. Chrome vanadium steel. Dimensions according to DIN 3110/ISO
3318. Satin finish. Supplied in tool roll.
Art. no.
15165
-0108
Teng Tools
No
6211MM
No of spanners
11
Sizes
mm
6x7 8x9 10x11 12x1314x15 16x17 18x19 20x22 21x23 24x27 30x32
Weight
kg
1.93
"Teng Tools" Set with double, open ended spanners. Chrome vanadium steel. Dimensions according to DIN 3110/
ISO 3318. Satin finish. Supplied in tool roll.
Art. no.
11198
-0108
Teng Tools
No
6208W
No. of spanners
8
Sizes
mm
6×7 8×9 10×11 12×13 14×15 16×17 18×19 20×22
Crow foot spanners
Crow foot spanners
"Gedore" Of chrome vanadium steel. Supplied complete with turning bar no 26 D. Chromium plated.
Art. no.
1027
-0056
-0106
-0155
-0205
-0254
-0304
-0353
"Gedore DS 3114"Size mm
13
14
16
17
18
19
21
Length
mm
160
160
200
200
200
200
250
Turning bar diameter mm
8
8
10
10
12
12
12
Pack.
qty
5
5
5
5
5
5
5
Art. no.
1027
-0502
-0601
-0700
-0809
-0908
-1005
-1104
"Gedore DS 3114"Size mm
24
27
30
32
36
41
46
Length
mm
250
250
250
250
315
315
315
Turning bar diameter mm
14
14
16
16
18
18
20
Pack.
qty
5
5
5
5
1
1
1
-0403
22
250
12
5
-1203
50
315
20
1
259
Hand tools
4
Spanners
Crow foot spanners
"Teng Tools" Crow foot spanners with 3/8" square-drive for tightening with socket tools, e.g. extension bar and
ratchet handle.
Metric series
Length
Art. no.
Teng Tools M3865-C Size
Pack.
11201
mm
qty
mm
-0103
10
10
140
-0202
11
10
150
-0301
12
10
160
-0400
13
10
170
-0509
14
10
180
-0608
15
10
190
-0707
16
10
200
-0806
17
10
210
-0905
18
10
220
-1002
19
10
230
Combination spanners
Combination spanner
"Teng Tools" Chrome vanadium steel. Stubby model for accessibility. Same dimension at both ends. Satin finish.
Art. no.
11651
-0108
-0207
-0306
-0405
-0504
"Teng Tools 6005M" Size
mm
10
11
12
13
14
Length
mm
95
100
105
110
115
Jaw thickness
mm
5.1
5.9
6.6
6.7
7.4
Ring height
mm
7.0
7.8
8.2
8.8
9.1
Pack.
qty
10
10
10
10
10
Art. no.
11651
-0603
-0702
-0801
-0900
-1007
"Teng Tools 6005M" Size
mm
15
16
17
18
19
Length
mm
120
125
130
135
140
Jaw thickness
mm
7.5
8.1
8.3
8.7
9.4
Ring height
mm
9.2
9.8
10.3
11.0
11.2
Pack.
qty
10
10
10
10
10
Combination spanner
"Teng Tools" Slim and strong. Chrome vanadium steel. Manufactured according to DIN 3113A - ISO 3318 - ISO
7738. Same dimension at both ends. The 12 point ring head is set at a 15° angle. Polished heads. Satin finish.
Metric series
AF series
Length
Jaw
Ring
Teng Tools 6005
Teng Tools 6001
thickness
height
Art. no.
Key
Pack.
Art. no.
Size
Size
Pack.
7267
mm
qty
7267
AF
mm
qty
mm
mm
mm
-0052
5.5
10
95
3.5
4.1
-0102
6
10
-3007
¼
6.3
10
100
4.0
4.7
-0201
7
10
110
4.0
5.0
-0300
8
10
-3106
5/16
7.9
10
120
4.5
5.5
-0409
9
10
130
4.5
5.9
-0508
10
10
-3205
3/8
9.5
10
140
5.0
6.5
-0607
11
10
-3304
7/16
11.1
10
150
5.4
6.9
-0706
12
10
160
5.5
7.3
-0805
13
10
-3403
½
12.7
10
170
5.9
7.8
-0904
14
5
-3502
9/16
14.3
5
180
6.2
8.3
-1001
15
5
190
6.4
8.6
-1100
16
5
-3601
5/8
15.9
5
200
6.7
8.9
-1209
17
5
210
6.9
9.3
-1308
18
5
-3700
11/16
17.5
5
220
7.2
9.9
-1407
19
5
-3809
¾
19.1
5
230
7.4
10.5
-1506
20
5
240
7.7
10.9
-1605
21
5
-3825
13/16
20.6
5
250
8.0
11.3
-1704
22
5
-3833
7/8
22.2
5
260
8.2
11.5
-1803
23
5
270
8.4
11.8
-1902
24
5
-3841
15/16
23.8
5
280
8.7
12.1
-2009
25
5
-3858
1
25.4
5
290
8.9
12.5
-2108
26
5
300
9.2
12.8
-2207
27
5
-3866
11/16
27
5
310
9.4
13.1
-2306
28
5
320
9.7
13.3
-2405
29
5
-3874
11/8
28.6
5
330
9.9
13.5
-2504
30
5
340
10.1
13.7
-2603
32
5
-3882
1¼
31.8
5
360
10.4
14.3
-2652
33
5
-3908
15/16
33.3
5
380
10.7
15.0
-2686
34
5
-4005
13/8
34.9
5
380
10.7
15.0
-2702
36
5
-4104
17/16
36.5
5
410
13.5
19.2
-2751
38
5
-4203
1½
38.1
5
430
15.0
20.4
260
Please quote the
Spanners
Art. no.
7267
-4302
-4401
-4500
-
AF series
Teng Tools 6001
Size
Size
AF
mm
15/8
41.3
1¾
44.5
17/8
47.6
-
Length
Pack.
qty
5
5
5
-
Jaw
thickness
mm
460
500
500
500
540
Ring
height
mm
16.0
17.0
17.0
18.0
18.0
mm
21.6
23.0
23.0
24.6
24.6
Hand tools
Metric series
Teng Tools 6005
Art. no.
Key
Pack.
7267
mm
qty
-2801
41
5
-2850
46
5
-2900
50
5
4
Combination spanner
"Teng Tools" Chrome vanadium steel. Extra long. Same dimension at both ends. The 12 point ring head is set at a
15° angle. Chrome plated and mirror polished.
Art. no.
11649
-0103
-0202
-0301
-0400
-0509
Teng Tools-no 6059Spanner size
mm
8
9
10
11
12
Length
mm
148
158
168
188
198
Jaw thickness
mm
4.9
5.0
5.6
5.6
6.3
Ring height
mm
5.3
6.2
6.4
7.3
7.9
Pack.
qty
10
10
10
10
10
Art. no.
11649
-0707
-0806
-0905
-1002
-1101
Teng Tools-no 6059Spanner size
mm
14
15
16
17
18
Length
mm
228
238
246
266
276
Jaw thickness
mm
7.4
7.6
8.2
8.2
9.0
Ring height
mm
9.0
9.9
10.4
10.5
12.4
Pack.
qty
10
10
10
10
10
-0608
13
208
6.7
8.6
10
-1200
19
285
9.1
12.6
10
Sets
Combination spanners in set
"Teng Tools" "Stubby" model. Short spanners made of chrome vanadium steel. Same dimension at both ends. The
12-point ring head is set at a 15° angle. Satin finish.
Art. no.
10947
-0104
Teng Tools
No
TT6010M
No. of spanners
10
Sizes
mm
10 11 12 13 14 15 16 17 18 19
Pack.
set
1
"Teng Tools" Set of 7 spanners of chrome vanadium steel. Same dimension at both ends. The 12-point ring head is
angled at a 15° angle. Polished heads. Satin finish.
Art. no.
6889
-0201
Teng Tools
No
4787T
No. of spanners
7
Measurement system
Metric
Spanner sizes
mm
33 34 36 38 41 46 50
Pack.
set
1
Combination spanners in sets
"Teng Tools" Sets of 7 combination spanners of chrome vanadium steel. Same dimension at both ends. The 12-point
ring head is angled at a 15° angle. Polished heads. Satin finish. Fit in Teng Tools tool boxes or tool trolleys.
Art. no.
6891
-0108
-0207
Teng Tools
No
TTX2032
TTX2640
No. of spanners
st
7
7
Measurement system
Metric
AF
Spanner size
20 21 22 24 27 30 32
13/16 7/8 15/16 11 1/16 11/8 1¼
Weight
kg
2.6
2.6
Pack.
set
1
1
261
Hand tools
4
Spanners
Compination spanner set
"Teng Tools" 3 sets with combination spanners in a special holder which can be connected to each other to one unit.
Spanners are made of chrome vanadium. Satin finish. Same dimension at both ends. The 12-point ring end is set at 15°
angle.
Art. no.
15491
-0103
-0202
-0301
Teng Tools
No
6515MMA
6512MMA
6507JMMA
Numper of keys
e.a.
15
12
7
Sizes
mm
5.5 6 7 8 9 10 11 12 13 14 20 21 22 23 24 25 26 27 33 34 36 38 41 46 50
15 16 17 18 19
28 29 30 32
Pack.
-
"Teng Tools" Chrome vanadium steel. Same dimension at both ends. The 12 point ring head is set at a 15° angle.
Polished heads. Satin finish. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool
trolleys. As an accessory there is a metal ring/carrying handle that keeps the spanners together.
Art. no.
2756-0101
5805-0303
Teng Tools
No
TT1236
TT3592
No. of keys
12
8
Sizes
mm/inch
8 9 10 11 12 13 14 15 16 17 18 19 5/16 3/8 7/16 ½ 9/16 5/8 11/16 ¾
Case size LxWxH
mm
265x142x50
265x142x50
Weight
kg
1.7
0.7
Pack.
set
1
1
Metal ring/handle
2756
-0200
Teng Tools
No
600
Pack.
1
Combination spanner sets
"Teng Tools" Chrome vanadium combination spanner sets. Same dimension at both ends. The 12 point head is set
at a 15° angle. Polished heads. Satin finish. Supplied in a handy tool roll.
Art. no.
15159
-0106
-0205
-0304
-0403
-0502
-0601
Teng Tools
No.
6507JMM 6512MM 6515MM
6507AF
6507JAF
6509AF
Number of keys
e.a.
7
12
15
7
7
9
Measurement system
Metric
Metric
Metric
AF
AF
AF
15/16, 13/ ¼, 5/16, 3/8,
Sizes
mm/inch 33, 34, 36, 20, 21, 22, 5.5, 6, 7, 8, 9, 13/16, 7/8,
15/16, 1, 11/ 8, 17/16, 7/16, ½, 9/
38, 41, 46, 23, 24, 25, 10, 11, 12,
26, 27, 28, 13, 14, 15,
16, 11/8, 1¼ 1½, 15/8, 16, 5/8, 11/
50
1¾, 17/8 16, ¾
29, 30, 32 16, 17, 18, 19
Pack.
-
"Teng Tools" Chrome vanadium steel. Same dimensions at both ends. The 12 point ring head is set at a 15° angle.
Polished heads. Satin finish. Supplied in tool roll.
Art. no.
11194
-0105
Teng Tools
No
6510W
No. of keys
10
Sizes
mm
6 8 10 11 12 13 14 15 17 19
Weight
kg
1.05
Pack.
set
1
"Teng Tools" Chrome vanadium steel. Long model. Same dimension at both ends. The 12 point ring head is angled
at a 15° angle. Satin finish. Supplied in tool roll.
Art. no.
11652
-0107
Teng Tools
No
6059LMP
No. of keys
9
Measurement system
Metric
Sizes
mm
8 10 11 12 13 14 15 17 19
Pack.
set
4
262
Please quote the
Spanners
Ring ratchet
"Teng Tools" Chrome vanadium steel. Combined ring-open-ended spanner and 12-point ring ratchet. The bi-hexagon ring head is set at a 15° angle. Same size at both ends.
Millimetre-series
American-series
Length
Jaw
Teng Tools 6005R
Teng Tools 6001R
thickness
Art. no.
Size
Pack.
Art. no.
Size
Size
Pack.
width
width
width
10972
mm
qty
10972
AF
mm
qty
mm
mm
-0102
8
10
-2009
5/16
7.9
10
140
4.6
-0201
9
10
150
4.9
-0300
10
10
-2108
3/8
9.5
10
159
5.3
-0409
11
10
-2207
7/16
11.1
10
165
5.6
-0508
12
10
172
6.0
-0607
13
10
-2306
½
12.7
10
178
6.4
-0706
14
5
-2405
9/16
14.3
5
191
6.8
-0805
15
5
200
7.0
-0904
16
5
-2504
5/8
15.9
5
208
7.2
-1001
17
5
226
7.7
-1100
18
5
-2603
11/16
17.5
5
237
8.2
-1209
19
5
-2702
¾
19.1
5
248
8.8
-2801
13/16
20.6
5
290
9.0
-1308
22
5
-2900
7/8
22.2
5
290
9.0
-1407
24
5
323
10.0
-1506
27
5
359
10.5
-1605
30
5
403
11.4
-1704
32
5
425
12.5
Ring
height
Hand tools
Combination ring ratchet spanners
4
mm
6.5
6.9
7.3
7.7
8.2
8.6
9.0
9.1
9.9
10.3
10.7
11.2
13.0
13.0
14.5
15.5
17.0
17.5
Swivel ring ratchet
"Teng Tools" Swivel ring ratchet made of chrome vanadium steel. The ring end swivels 180°. Same size at both ends.
Straight spanner is turned when shifting between right and left-hand action. Satin finish.
Art. no.
13189
-0105
-0204
-0303
-0402
-0501
Teng Tools
6005
08RF
09RF
10RF
11RF
12RF
Size
mm
8
9
10
11
12
Length
mm
127
131
136
141
147
Jaw thickness
mm
4.0
4.4
4.8
5.2
5.5
Ring height
mm
6.8
7.2
7.6
8.0
8.5
Pack.
qty
10
10
10
10
10
Art. no.
13189
-0709
-0808
-0907
-1004
-1103
Teng Tools
6005
14RF
15RF
16RF
17RF
18RF
Size
mm
14
15
16
17
18
Length
mm
160
169
179
190
203
Jaw thickness
mm
6.2
6.5
6.8
7.2
7.7
Ring height
mm
9.3
9.7
10.2
10.6
11.0
Pack.
qty
10
10
10
10
10
-0600
13RF
13
154
5.8
9.0
10
-1202
19RF
19
215
8.2
11.5
10
Set
Combination ring ratchet spanners in set
"Teng Tools" Set of 8 ratcheting combinatiuon spanners. Chrome vanadium steel. Combined ringopen-ended spanner and 12 point ring ratchet. Reversible ratchet function with lever. Same size at both ends.
Art. no.
10973
-0101
-0200
Teng Tools
No
TT6508R
TT6508RAF
No. of keys
qty
8
8
Sizes
mm/inch
8 10 11 12 13 14 17 19
5/16 3/8 7/16 ½ 9/16 5/8 11/16 ¾
Case size LxWxH
mm
265x142x50
265x142x50
Weight
kg
1.1
1.1
Pack.
set
1
1
Swivel-joint combination spanners in sets
"Teng Tools" Set of 8 swivel combination ring ratchet spanners made of chrome vanadium steel. The ring end swivels 180°. Same size at both ends. Straight spanners are turned when shifting between right and left-hand action.
Supplied in plastic case with removable lock. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
13190
-0102
Teng Tools
No
TT6508RF
No. of keys
ea.
8
Sizes
mm
8 10 11 12 13 14 17 19
Case dim. LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
set
1
263
Hand tools
4
Spanners
Ring spanners
Ring spanner Teng Tools
"Teng Tools" Rigger Jigger. Angled, compact, special ring spanner with 12 point opening. Designed for good access.
Art. no.
10166
-0108
Teng Tools
No
601013
Sizes
mm
10x13
Length
mm
120
Pack.
qty
10
Ring spanner
"Teng Tools" Double, with different size 12 point sockets at each end. Dimensions according to DIN 838. Chrome
vanadium steel. Doubled curved 75° - high angle. Satin finish.
Art. no.
11196
-0100
-0209
-0308
-0407
-0506
-0605
Teng Tools
No
630607
630809
631011
631213
631415
631617
Sizes
mm
6x7
8x9
10x11
12x13
14x15
16x17
Length
mm
168
183
198
217
239
260
Ring height
mm
5.6-6.3
6.6-7.0
7.4-7.7
8.1-8.4
8.8-9.1
9.5-9.8
Pack.
qty
10
10
10
10
10
10
Art. no.
11196
-0704
-0803
-0902
-1009
-1108
Teng Tools
No
631819
6312022
6312123
6312427
6313032
Sizes
mm
18x19
20x22
21x23
24x27
30x32
Length
mm
292
318
326
329
362
Ring height
mm
10.1-10.4
10.9-11.4
11.2-11.6
12.4-13.4
14.4-15.2
Pack.
qty
10
5
5
5
5
Sets
Double ring spanner set
"Teng Tools" Chrome vanadium steel. Double, with different size 12 point sizes at each end. Manufactured according
to DIN 838. Double angled 75° - high angle. Satin finish. Supplied in tool roll.
Art. no.
15164
-0109
Teng Tools
No
6308MM
No. of spanners
8
Sizes
mm
6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22
Weight
kg
1.38
Pack.
-
Ring ratchet spanners
Openable ring ratchet
"Super Tool" Openable ring ratchet. A tool especially designed for loosening and tightening pipe and hose couplings.
Perfect for confined areas e.g. in hydraulic applications. The ring ratchet opens ingeniously and simply and you can access
the nut in the coupling. In the tightening position the ratchet locks, when regripping the ratchet opens and "rolls over"
on the nut for the next tightening position. Accordingly you do not need to lift the ratchet up and down again to continue
tightening. 12-point opening of forged, sectional handle with plastic grip.
Set in plastic case containing 7 spanners.
Art. no.
12779
-0103
-0202
-0301
-0400
-0509
-0608
Super Tool
No
RQ10N
RQ11N
RQ12N
RQ13N
RQ14N
RQ16N
Size
mm
10
11
12
13
14
16
Max. torque
Nm
28
36
46
57
69
85
Length
mm
135
136
137
139
140
184
Ring head o.d.
mm
24
25
27
28
7.5
33
Ring head height
mm
7.5
7.5
7.5
7.5
7.5
9.5
Pack.
qty
1
1
1
1
1
1
Art. no.
12779
-0707
-0806
-0905
-1002
-1101
-1200
Super Tool
No
RQ17N
RQ19N
RQ20N
RQ21N
RQ22N
RQ24N
Size
mm
17
19
20
21
22
24
Max. torque
Nm
121
165
185
205
230
285
Length
mm
185
188
188
230
230
234
Ring head o.d.
mm
34
37
41
41
41
44
Ring head height
mm
9.5
9.5
9.5
13.0
13.0
13.0
Pack.
qty
1
1
1
1
1
1
Art. no.
12779
-1309
-1408
-1507
-1606
Super Tool
No
RQ26N
RQ27N
RQ30N
RQ32N
Size
mm
26
27
30
32
Max. torque
Nm
340
375
480
550
Length
mm
236
240
323
326
Ring head o.d.
mm
46
48
54
57
Ring head height
mm
13.0
13.0
16.0
16.0
Pack.
qty
1
1
1
1
264
Please quote the
Spanners
12779
ea.
mm
sts
-2000
7
13 17 19 22 24 27 32
1
Hand tools
Set in plastic case
No. of keys
Sizes
Pack.
Ring ratchet
"Gedore" Of chrome vanadium steel. For exchangeable, bi-hexagon inserts.
No 31 K. Ring ratchet spanners (only). Bronzed.
No 31 R. Bi-hexagon inserts. Bright polished.
No 31 VR. Square inserts. Bright polished.
Ratchet handles
Inserts
Gedore 31 K
Gedore 31 R
Art. no.
Length
Ring
Ring
Pack.
Art. no.
Size
Pack.
head
head
o.d.
width
1111
mm
mm
mm
qty
1111
mm
qty
-0103
150
22.5
11.5
1
-1101
8
1
-1200
9
1
-1309
10
1
-1408
11
1
-1507
12
1
-1606
13
1
-0202
205
31
15.5
1
-1705
14
1
-1804
15
1
-1903
16
1
-2000
17
1
-0301
255
37
17.5
1
-2109
18
1
-2208
19
1
-2307
21
1
-2406
22
1
-2505
23
1
-0400
305
43.5
18.5
1
-2604
24
1
-2703
26
1
-2802
27
1
-2901
28
1
-0509
400
50.5
19.5
1
-3008
30
1
-3107
32
1
-0608
500
62.5
21.5
1
-3305
36
1
-3404
41
1
-0707
635
77
31.5
1
-3503
46
1
-3602
50
1
-0806
760
90
33.5
1
-3701
55
1
-3909
60
1
-0905
940
105
36.5
1
-4006
65
1
-4105
70
1
-1002
960
118
39.5
1
-4204
75
1
-4303
80
1
(-1028)
1150
133
46
1
(-4402)
85
1
(-4501)
90
1
(-1044)
1400
160
55
1
(-4600)
95
1
(-4709)
100
1
(-4808)
105
1
(-1069)
1500
169
57
1
(-4907)
110
1
(-5003)
115
1
4
Inserts
Gedore 31 VR
Art. no.
Size
Pack.
1111
(-6001)
(-6100)
(-6209)
(-6308)
8
9
10
11
mm
1
1
1
1
qty
(-6407)
(-6506)
12
14
1
1
(-6605)
(-6704)
17
19
1
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Open ring spanners
Open nut spanner
"Teng Tools" Chrome vanadium steel. Double, angled flared nut spanners with different openings at each end. Satin
finish.
Metric series
AF series
Art. no.
Teng
Size
Pack.
Art. no.
Teng
Size
Size
Pack.
Tools
Tools
10584
no
mm
qty
10584
no
AF
mm
qty
-0102
641011
10×11
10
-0300
661416
7/16×½
11.1×12.7
10
-0201
641213
12×13
10
-0227
641314
13×14
1
-0243
641617
16×17
10
-0268
641922
19×22
11
-
Length
mm
152
159
178
178
196
207
Ring
height
mm
7.9
11.9
10.0
10.0
11.6
13.8
265
Hand tools
4
Spanners
Insert tools
Swivel handle
Swivel handle
"Teng Tools" Swivel handle with 9x12 mm rectangular drive for different insert tools such as ratchet head and ratcheting spanners. Satin finish and two component handle.
Art. no.
11830
-0102
Teng Tools
No
600010RI
Rectangular drive
mm
9x12
Length
mm
239
Pack.
qty
10
Ratchet head
Ratchet head for insert tools
"Teng Tools" Ratchet head with 9x12 mm rectangular drive for attachment to swivel handle 600010RI. 3/8" square
drive for sockets and socket tools. Satin finish.
Art. no.
11828
-0106
Teng Tools
No
600038RI
Attachment to socket tools square
inch
3/8
Attachment to swivel handle
mm
9x12
Pack.
qty
10
Ratcheting spanners
Ratcheting spanner for insert tools
"Teng Tools" Ratcheting spanners with 9x12 mm rectangular drive for attachment to swivel handle 600010RI. Satin
finish.
Art. no.
11829
-0105
-0204
-0303
-0402
Teng Tools
No
600508RI
600510RI
600511RI
600512RI
Size
mm
8
10
11
12
Outside diameter of ring head
mm
17
20
21
23
Height of ring head
mm
6.8
7.6
8
8.5
mm
9x12
9x12
9x12
9x12
Pack.
qty
10
10
10
10
Art. no.
11829
-0501
-0600
-0709
-0808
Teng Tools
No
600513RI
600516RI
600517RI
600519RI
Size
mm
13
16
17
19
Outside diameter of ring head
mm
25
30
32
34
Height of ring head
mm
8.9
10.2
10.6
11.5
mm
9x12
9x12
9x12
9x12
Pack.
qty
10
10
10
10
Set
Set of insert tools
"Teng Tools" Set of 10 pieces including swivel handle, ratchet head 3/8" and 8 ratcheting spanners - all with 9x12 mm
rectangular drive. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
11838
-0104
Teng Tools
No
TTIG10
No. of pieces
10
Swivel handle with rect. drive
mm
9x12
Ratchet head for socket tools
inch
3/8
Ratcheting spanners
mm
8 10 11 1213 16 17 19
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
sts
1
Crescent spanners
Crescent spanner
Art. no.
1045
-0104
-0112
-0120
266
"Gedore" Double, with different size bi-hexagon openings at each end. Of chrome vanadium steel. Chromium plated,
with ground heads.
Metric series
AF series
Length
Ring
Gedore 304
Gedore 304
height
Size
Pack.
Art. no.
Size
Size
Pack.
mm
qty
1045
AF
mm
qty
mm
mm
11×13
10
-0500
7/16×½
11.1×12.7
10
150
7-8.5
13×15
10
185
8.7-10.3
13×17
10
185
8.7-10.3
Please quote the
Spanners
Pack.
qty
10
10
10
10
10
Art. no.
1045
-0609
-0708
-0807
AF series
Gedore 304
Size
Size
AF
mm
9/16×5/8
14.3×15.9
5/8×¾
15.9×19.1
¾×7/8
19.1×22.2
Length
Pack.
qty
mm
10
10
10
185
185
185
230
230
Ring
height
mm
8.7-10.3
8.7-10.3
8.7-10.3
10-11.5
10-11.5
Hand tools
Art. no.
1045
-0153
-0203
-0302
-0351
-0401
Metric series
Gedore 304
Size
mm
14×16
14×17
15×17
16×18
19×22
4
Swivel head wrenches
Double flex wrenches
"Teng Tools" Chrome vanadium steel. Double, with different size 12 point sockets at each end. Satin finish.
Metric seriesTeng Tools 6500
AF seriesTeng Tools 6100
Art. no.
Size
Pack.
Art. no.
Size
Size
7292
mm
qty
7292
AF
mm
-0200
8×9
20
-0309
10×11
20
-1000
3/8×7/16
9.5×11.1
-0358
10×13
1
-0408
12×13
20
-1109
½×9/16
12.7×14.3
-0507
14×15
20
-0606
16×17
20
-1208
5/8×11/16
15.9×17.5
-0705
18×19
20
-
Length
Pack.
qty
20
20
20
-
mm
192
200
213
218
238
264
285
Double flex wrenches
"Gedore" For external Torx heads according to the Torx-system. Of chrome vanadium steel. Double, with different openings at each end. Chromium plated. With hole for turning bar.
Art. no.
3330
-0104
-0203
-0302
-0401
Gedore
TX 34E6×E8
E10×E12
E14×E18
E20×E24
For slot width
mm
5.74×7.52
9.42×11.70
12.90×16.70
18.39×21.85
For screw
M
5×6
8×10
12×14
16×20
Length
mm
190
230
265
295
Suitable turning bar
mm
6
8
10
12
Pack.
qty
10
10
10
10
Sets
Double flex wrench set
"Teng Tools" Chrome vanadium steel. Double, with different size 12 point sockets at each end. Satin finish. Supplied
in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
7300
-0101
Teng Tools
No
TT6506
No. of keys
6
Sizes
mm
8×9 10×11 12×13 14×15 16×17 18×19
Case size LxWxH
mm
265x142x50
Weight
kg
1.57
Pack.
qty
10
Bits/socket-swivel wrenches
Bits/socket-swivel wrench
"Teng Tools" Bi-Flex-wrench. Equipped with ¼" bit socket at one end of the wrench and ¼" square-drive at the other
end.
Art. no.
1558
-0103
Teng Tools
No
691406
With socket drive
¼
With bit socket for bits
¼
Length of wrench
mm
200
Pack.
qty
10
267
Hand tools
4
Spanners
Open ended impact wrenches
Impact wrench
"Gedore" Of special steel Dimensions according to DIN 133. Steel grey. Other metric and imperial sizes quoted on
request.
Art. no.
1025
-0108
-0207
-0306
-0405
-0504
"Gedore 133"Size
mm
27
30
32
36
41
Length
mm
180
190
195
210
225
Jaw thickness
mm
16.5
17
17.5
18.5
19.5
Pack.
qty
1
1
1
1
1
Art. no.
1025
-0603
-0702
-0801
-0900
-1007
"Gedore 133"Size
mm
46
50
55
60
65
Length
mm
255
280
315
320
350
Jaw thickness
mm
20
21.5
24.5
24.5
28
Pack.
qty
1
1
1
1
1
Art. no.
1025
-1106
-1205
-1304
-1403
-1502
"Gedore 133"Size
mm
70
75
80
85
90
Length
mm
370
400
405
405
455
Jaw thickness
mm
30
31.5
34.5
34.5
39
Pack.
qty
1
1
1
1
1
Art. no.
1025
-1601
(-1700)
(-1809)
(-1908)
(-2005)
"Gedore 133"Size
mm
95
100
105
110
115
Length
mm
455
500
500
500
525
Jaw thickness
mm
39
47
47
47
55
Pack.
qty
1
1
1
1
1
Art. no.
1025
(-2104)
(-2203)
(-2302)
(-2401)
(-2500)
"Gedore 133"Size
mm
120
125
130
135
140
Length
mm
525
545
575
575
640
Jaw thickness
mm
55
50
55
55
60
Pack.
qty
1
1
1
1
1
Art. no.
1025
(-2609)
(-2708)
(-2807)
(-2906)
(-3003)
"Gedore 133"Size
mm
145
150
155
160
165
Length
mm
640
640
640
715
715
Jaw thickness
mm
60
60
60
70
70
Pack.
qty
1
1
1
1
1
Art. no.
1025
(-3102)
(-3201)
"Gedore 133"Size
mm
170
175
Length
mm
715
715
Jaw thickness
mm
70
70
Pack.
qty
1
1
Ring impact wrenches
Ring impact wrench
"Gedore" Of special steel With bi-hexagon openings. Steel grey. Sizes 180-220 mm imperial sizes quoted on request.
Art. no.
1058
-0108
-0157
-0306
-0405
-0603
-0702
"Gedore 306"Size
mm
24
27
30
32
36
38
Length
mm
160
185
190
195
205
205
Ring height
mm
15
15.5
16.5
16.5
19.5
19.5
Pack.
qty
1
1
1
1
1
1
Art. no.
1058
-0801
-1007
-1106
-1205
-1304
-1403
"Gedore 306"Size
mm
41
46
50
55
60
65
Length
mm
225
240
250
270
270
290
Ring height
mm
20.5
22.5
23.5
25
26
29
Pack.
qty
1
1
1
1
1
1
Art. no.
1058
-1502
-1601
-1700
-1809
-1908
-2005
"Gedore 306"Size
mm
70
75
80
85
90
95
Length
mm
315
325
345
365
400
400
Ring height
mm
32.5
34
35
37
41.5
41.5
Pack.
qty
1
1
1
1
1
1
Art. no.
1058
-2104
-2203
-2302
-2401
(-2500)
(-2609)
"Gedore 306"Size
mm
100
105
110
115
120
125
Length
mm
400
435
435
435
480
480
Ring height
mm
41.5
47.5
47.5
47.5
54
54
Pack.
qty
1
1
1
1
1
1
Art. no.
1058
(-2708)
(-2807)
(-2906)
(-3003)
"Gedore 306"Size
mm
130
135
140
145
Length
mm
520
520
520
580
Ring height
mm
58
58
58
64
Pack.
qty
1
1
1
1
268
Please quote the
Spanners
Hex key
"Luna" Of chrome vanadium steel. Ground key ends. Size marked. Black.
Metric-series
Unpack.
DIY-pack.
Size
Length Art. no. Pack. Art. no. Pack. Art. no.
mm
0.7
0.9
1.3
1.5
2
2.5
3
3.5
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
22
27
32
mm
34×8
34×10
46×14
52×12
58×12
60×15
65×20
68×22
72×25
80×28
90×32
95×34
100×36
106×38
112×40
118×42
125×45
132×50
140×55
150×57
153×57
160×60
170×65
175×70
200×80
250×100
315×125
20521
-0107
-0206
-0305
-0404
-0503
-0602
-0701
-0800
-0909
-1006
-1105
-1204
-1303
-1402
-1501
-1600
-1709
-1808
-1907
-2004
-2103
-2202
-2301
-2400
-2509
-2608
-2707
-
20962
-0103
-0202
-0301
-0400
-0509
-0608
-0707
-0806
-0905
-1002
-
-
20522
-0106
-0205
-0304
-0403
-0502
-0601
-0700
-0809
-0908
-1005
-1104
-1203
-1302
-1401
-
AF-series
Size
Size
Length
AF
1/16
5/64
3/32
1/8
5/32
3/16
7/32
¼
5/16
3/8
½
9/16
5/8
¾
-
mm
1.6
2
2.4
3.2
4
4.8
5.6
6.4
8
9.5
12.7
14.3
15.9
19.1
-
mm
46×13
50×14
56×17
60×20
68×24
75×25
81×27
88×30
98×34
110×37
125×45
140×55
153×57
175×70
-
Pack.
Hand tools
Hex keys
4
-
Hex key
"Teng Tools" Chrome vanadium steel. Dimension marked. Black.
Metric series
Teng Tools 3105
Art. no.
Size
Length
Pack.
Art. no.
11656
-0103
-0202
-0301
-0400
-0509
-0608
-0707
-0806
-0905
-1002
-1101
-1200
-1309
-1408
-1507
-1606
-1705
-1804
-1903
-2000
mm
0.7
0.9
1.3
1.5
2
2.5
3
4
4.5
5
5.5
6
7
8
9
10
12
14
17
19
mm
35×8
38×10
41×12
45×14
50×16
56×18
63×20
70×25
75×26
80×28
85×30
90×32
95×34
100×36
106×38
112×40
125×45
140×56
160×63
180×70
qty
100
100
100
100
100
100
100
100
100
100
50
50
50
50
30
50
10
5
5
5
11657
-0102
-0201
-0300
-0409
-0508
-0607
-0706
-0805
-0904
-1001
-1100
-1209
-1308
-1407
-
AF series
Teng Tools 3101
Size
Size
AF
1/16
5/64
3/32
7/64
1/8
9/64
5/32
3/16
7/32
¼
5/16
3/8
7/16
½
-
mm
1.6
2
2.4
2.8
3.2
3.6
4
4.8
5.6
6.4
8
9.5
11.1
12.7
-
Length
mm
44×14
48×15
51×17
54×18
57x19
60×20
64×21
70×24
76×26
83×28
95×32
108x35
121x38
133×41
-
Pack.
qty
100
100
100
100
100
100
100
100
50
50
50
50
5
10
-
269
Hand tools
4
Spanners
Hexagon key - long
"Luna" Long. Of chrome vanadium steel. Ground key ends. Size marked. Black.
Size
Length
Metric-series
AF-series
Unpacked Pack. DIY-pack. Pack. Art. no.
Size
Size
Length
mm
mm
20523
20523
20944
AF
mm
mm
2
95×17
-0105
2.5
110×18 -0204
3
126×20 -0303
-0907
-0106
1/8
3.2
126×20
4
142×25 -0402
-1004
5
160×28 -0501
-1103
-0205
3/16
4.8
158×28
6
180×32 -0600
-1202
-0304
¼
6.4
178×32
8
200×36 -0709
-0403
5/16
8
198×36
10
224×40 -0808
-0502
3/8
9.5
222×40
Pack.
-
Hexagon key - long with screw holder
"Luna" Series BCT. Extra long hexagon keys of chrome vanadium steel. With globular hexagonal head and screw
holder at the long key end. Ball shaped hexagonal heads at the long key end - which permits turning even at a 30° angle.
Chromium plated.
Size
Length
Un-packed
DIY-packed
vidd
Art. no.
Pack
Art. no.
Pack.
mm
mm
20516
20516
2.5
110x18
-0104
3
126x20
-0203
-0807
4
142x25
-0302
-0906
5
160x28
-0401
-1003
6
180x32
-0500
-1102
8
200x36
-0609
10
224x40
-0708
-
Hexagon key
"Luna" Chrome vanadium steel. Black. With ball shaped hexagonal head at the long key end - which permits turning
even at a 30° angle.
Size
Length
Un-packed
DIY-packed
Un-packed
Art. no. Pack. Art. no. Pack.
Size
Size
Length Art. no. Pack.
mm
mm
20965
20884
inch
mm
mm
20965
1.5
79x16
-0100
-0108
1/16
1.6
79x15
-1108
2
86x17
-0209
-0207
5/64
2
84x17
-1207
2.5
94x18
-0308
-0306
3/32
2.4
92x17
-1306
3
101x20 -0407
-0405
1/8
3.2
102x20 -1405
4
110x25 -0506
-0504
5/32
4
108x25 -1504
5
120x28 -0605
-0603
3/16
4.8
118x28 -1603
5.5
127x30 -0654
-0702
6
133x32 -0704
-0801
7/32
5.6
125x30 -1702
7
145x34 -0803
-0900
¼
6.4
135x32 -1801
8
154x36 -0902
-1007
5/16
8
152x36 -1900
10
172x40 -1009
-1106
3/8
9.5
170x40 -2007
-
Hex key
"Teng Tools" Chrome vanadium steel. Black. With ballpoint hexagonal head at the long key end - which permits turning at a 30° angle.
Art. no.
12269
-0100
-0209
-0308
-0407
-0506
Teng Tools 3105BL-CSize
mm
1.5
2.0
2.5
3.0
4.0
Length
mm
77x14
83x16
90x18
98x20
106x24
Pack.
qty
10
10
50
10
10
Art. no.
12269
-0605
-0704
-0753
-0803
-0902
Teng Tools 3105BL-CSize
mm
5.0
6.0
7.0
8.0
10.0
Length
mm
118x28
137x32
147x34
156x36
170x40
Pack.
qty
10
10
40
30
30
Hexagon key
"Luna" Of chrome vanadium steel. With ball shaped, tapered hexagonal heads
turning even at a 30° angle. Chromium plated.
Art. no.
20532
-0104
-0203
-0302
-0401
Luna TLSize
mm
1.5
2.0
2.5
3
Length
mm
79x16
95x17
110x18
126x20
Pack.
Art. no.
20532
-0807
-0906
-1003
-1102
Luna TLSize
mm
8
10
11
12
Length
mm
200x36
224x40
240x43
250x45
Pack.
-
270
Please quote the
at the long key end - which permits
-0500
4
142x25
-1201
14
280x55
-
-0609
5
160x28
-1300
17
320x60
-
-0708
6
180x32
-1409
19
360x70
-
Spanners
"Luna" Low height hexagon keys of chrome vanadium steel for good accessibility in confined areas. With ball shaped,
tapered hexagonal heads at the long key end - which permits turning even at a 30° angle. Chromium plated.
Art. no.
20535
-0101
-0200
-0309
Luna TT Size
mm
1.5
2
2.5
Length
mm
79x7.5
95x8.5
110x9
Pack.
Art. no.
20535
-0408
-0507
-0606
Luna TT Size
mm
3
4
5
Length
mm
126x10
142x12.5
160x14
Pack.
Art. no.
20535
-0705
-0804
-0903
Luna TT Size
mm
6
8
10
Length
mm
180x16
200x18
220x20
Pack.
-
Hand tools
Hexagon key
4
Hex key with T-handle
"Teng Tools" Hex keys with T-handle. With ballpoint head on the long key end - which improves access.
Millimetre-series
American-series
Length
Teng Tools 5105
Teng Tools 5101
Art. no.
Size
Pack.
Art. no.
Size
Size
Pack.
width
width
width
10179
mm
qty
10179
inch
mm
qty
mm
-0053
2.0
10
12x100
-0103
2.5
10
-2000
3/32
2.4
10
12x100
-0202
3
10
-2109
1/8
3.2
10
12x100
-0301
4
10
-2208
5/32
4
10
12x100
-0400
5
10
-2307
3/16
4.8
10
15x150
-0509
6
10
-2406
7/32
5.6
10
15x150
-0608
7
10
-2505
¼
6.4
10
15x150
-0707
8
10
-2604
5/16
8
10
18x190
-0806
10
10
20x200
-0905
12
10
20x200
In sets
Hexagon keys in set
"Luna" In a ring. With spring. Set of 8 hexagon keys. Of chrome vanadium steel. Black.
Arat. no.
20527
-0101
-0200
Measurement system
Metric
AF
Sizes
1.5 2 2.5 3 4 5 5.5 6
1/16 5/64 3/32 1/8 5/32 3/16 7/32 ¼
Number of sets
per pack.
-
Hexagon keys in set
"Luna" In a ring. With spring. Set of 10 hexagon keys. Of chrome vanadium steel. Black.
Art. no.
20918
-0108
-0207
Measuring system
Metric
AF
Sizes
1.5 2 2.5 3 4 5 5.5 6 8 10 1/16 5/64 3/32 1/8 5/32 3/16 7/32 ¼ 5/16 3/8
Number of sets
per pack.
-
Hex keys in set
"Teng Tools" With holding ring. Contains 10 keys. Chrome vanadium steel. Black.
Art. no.
10582
-0104
-0203
Teng Tools
No
1425
1424
Measurement system
Millimetre
Inch
Sizes
1.5 2 2.5 3 4 5 6 7 8 10 1/16 5/64 3/32 1/8 5/32 3/16 7/32 ¼5/16 3/8
No. of sets
per pack.
6
6
Hex keys in set
"Teng Tools" Contains 9 hex keys. Chrome vanadium steel. Black. In folding plastic holder.A display supplied with the
order of 10 hex key sets
Art. no.
11269
-0102
Teng Tools
No
1479MMR
Sizes
mm
1.5 2 2.5 3 4 5 6 8 10
No. of sets
per pack.
10
271
Hand tools
4
Spanners
Hexagon keys in set
"Luna" Set of 7 hexagon keys. Of chrome vanadium steel. Black. In plastic holder.
Art. no.
20939
-0103
-0202
Number of keys
7
7
Sizes
1.5 2 2.5 3 4 5 6
1/16 5/64 3/32 1/8 5/32 3/16 ¼
Number of sets
per pack.
-
Hexagon keys in set
"Luna" Set of 7 hexagon keys. Of chrome vanadium steel. Black. With ball shaped hexagonal head at the long key end
- which permits turning even at a 30° angle. Supplied in plastic holder.
Artn. no.
20893
-0107
Number of keys
7
Sizes
mm
1.5 2 2.5 3 4 5 6
Number of sets
per pack.
-
Hex keys in set
"Teng Tools" Sets of 7 hex keys. Chrome vanadium steel. Black. With ball point heads on the long key end - which
permits turning even at an angle. Supplied in plastic holder.
Art. no.
10955
-0103
-0202
Teng Tools
No
1475
1474
Measurement system
Metric
AF
No. of keys
7
7
Sizes
mm/inch
2.5 3 4 5 6 8 10
1/8 5/32 3/16 7/32 ¼ 5/16 3/8
No. of sets
per pack.
6
6
Hexagon keys in set
"Luna" Sets of 10 long hexagon keys. Of chrome vanadium steel. With ball shaped hexagonal heads at the long key end
- which permits turning even at a 30° angle. Supplied in plastic holder.
Art. no.
20964
-0101
-0200
Measurement system
Metric
Inch
Number of keys
10
10
Sizes
1.5 2 2.5 3 4 5 5.5 6 8 10 1/16 5/64 3/32 1/8 5/32 3/16 7/32 ¼ 5/16 3/8
Number of sets
per pack.
-
Hex keys in set
"Teng Tools" Sets of 9 chrome vanadium steel hex keys. With ballpoint hexagonal heads at the long key end - which
permits turning at a 30° angle.° Supplied in folding plastic holder.A display supplied with the order of 10 hex key sets.
Art. no.
11226
-0104
-0203
Teng Tools
No
1479MM
1479AF
Measurement system
Millimetre
Inch
No. of keys
ea.
9
9
Sizes
mm/inch
1.5 2 2.5 3 4 5 6 8 10
5/64 3/32 1/8 5/32 3/16 7/32 ¼ 5/16 3/8
No. of sets
per pack.
10
10
Hex keys in set
"Teng Tools" Set of 9 hex keys of chrome vanadium steel With ballpoint hexagonal heads at the long key end - which
permits turning at a 30° °angle.
Supplied in plastic holder.
Art. no.
11724
-0101
Teng Tools
No
1479MMA
Measurement system
Millimetre
No. of keys
ea.
9
Sizes
mm
1.5 2 2.5 3 4 5 6 7 10
No. of sets
per pack.
10
Hex keys in set
"Teng Tools" Set of 25 hex keys - millimetre and inch sizes.
Supplied in plastic case.
Art. no.
11654
-0107
Teng Tools
No
1490
No. of keys
9
Sizes
mm
1.3 1.5 2.0 2.5 3.0 4.0 4.5 5.0 5.5 6.0 7.0 8.0 10.0
Sizes
AF
1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 ¼ 5/16 3/8
No. of sets
per pack.
1
272
Please quote the
Spanners
"Wera" Hex-Plus. A set of high quality hexagon keys manufactured of stainless steel. Hardening and material selection for the keys conform to industrial demands for breakage and rigidity as well as wear and tear. Ball point on "long"
end.
Art. no.
14422
-0100
Wera
No
3950/9 PKL
No. of keys
ea.
9
Sizes
mm
1.5 2 2.5 3 4 5 6 8 10
Key sizes
mm
50x14, 100x16, 112x18,126x20, 140x25,
160x28,180x32, 200x36, 219x40
No. of sets
per pack.
1
Hand tools
Hexagon keys, stainless in set
4
Set of hex/TX keys
"Teng Tools" Set of 28 pieces. Contains two hex key sets in metric and imperial sizes (1479MM and 1479AF) a TXset (1479TX) and a 7 mm hex key with ball point.
Supplied in plastic insert case with removable lock. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
12825
-0107
Teng Tools
No
TTHT28
No. of pieces
ea.
28
Hex keys 1479MM
mm
1.5 2 2.5 3 4 5 6 8 10
Hex keys 1479AF
inch
5/64 3/32 1/8 5/32 3/16 7/32 ¼ 5/16 3/8
Hex key with ball point
mm
7
TX-keys 1479TX
TX
8 9 10 15 20 25 27 30 40
Case size LxWxH
mm
265xx142x50
Weight
kg
Pack.
set
1
Hex keys, in set
"Teng Tools" 7 hex keys in set. Chrome vanadium steel. Retractable in aluminium case with nylon inserts.
Art. no.
15147
-0101
-0200
Teng Tools
No
1476NMM
1476NAF
Measurement system
Metric
AF
No of keys
e.a.
7
7
Sizes
mm/inch
1.5 2 2.5 3 4 5 6
1/16 5/64 3/32 1/8 5/32 3/16 7/32
No. of sets
-
Hexagon keys in set
"Luna" Hexagon keys of chrome vanadium steel - retractable in the plastic covered steel core handle. Size markings
on the side of the handle.Hexagon keys of chrome vanadium steel - retractable in the plastic covered steel core handle.
Art. no.
20949
-0101
-0200
-0309
Number of keys
7
6
6
Sizes
mm
1.5 2 2.5 34 5 6
2.5 3 4 5 6 8
3 4 5 6 8 10
Number of sets
per pack.
Art. no.
20949
-0408
Number of keys
7
Sizes
inch
1/16 5/64 3/32 1/8 5/32 3/16 7/32
Number of sets
per pack.
-
Hexagon keys in set
"Luna" Hexagon keys of nickel-chromium steel, retractable in chromium plated handle. With hanging ring.Hexagon
keys of chrome vanadium steel - retractable in the plastic covered steel core handle.
Art. no.
20528
-0100
-0209
-0308
Luna
No
009-1
009-2
009-3
Number of keys
7
6
6
Sizes
mm
1.5 2 2.5 3 4 5 6
2.5 3 4 5 6 8
3 4 5 6 8 10
Number of sets
per pack.
Art. no.
20528
-0407
-0506
-0605
Luna
No
009-4
009-6
009-5
Number of keys
7
6
5
Sizes
AF
1/16 5/64 3/32 1/8
1/8 5/32 3/16 7/32 ¼ 3/16 7/32 ¼ 5/16 3/8
5/32 3/16 7/32
5/16
Number of sets
per pack.
-
Hexagon keys in set
"Luna" Set of 7 hexagon keys. Made of nickel-chromium steel, built-in the handle. With ball shaped hexagonal heads which permits turning even at a 30° angle.
Art. no.
20528
-0704
Number of keys
7
Sizes
mm
2.5 3 4 5 6 8 10
Number of sets
per pack.
-
273
Hand tools
4
Spanners
TX-keys
For TX heads
Torx-key
"Wera" For internal heads according to the Torx-system. Of chrome vanadium steel. Both ends milled. Black. The
shape of the head gives minimal torque transmission losses.
Art. no.
7078
-0044
-0069
-0085
-0101
-0200
Wera-no
967TX 706
TX 707
TX 708
TX 709
TX 710
Spanner
No
TX 6
TX 7
TX 8
TX 9
TX 10
Max. head width
mm
1.70
1.99
2.31
2.5
2.74
For screw
M
2
2.5
2.5
3
3-3.5
Length×length
mm
16×42
16×48
16×48
16×48
17×51
Pack.
qty
5
5
5
5
5
Art. no.
7078
-0309
-0408
-0507
-0606
-0705
Wera-no
967TX 715
TX 720
TX 725
TX 727
TX 730
Spanner
No
TX 15
TX 20
TX 25
TX 27
TX 30
Max. head width
mm
3.27
3.86
4.43
4.99
5.52
For screw
M
3.5-4
4-5
4.5-5
4.5-6
6-7
Length×length
mm
18×54
19×57
20×60
21×64
24×70
Pack.
qty
5
5
5
5
5
Art. no.
7078
-0804
-0903
-1000
Wera-no
967TX 740
TX 745
TX 750
Spanner
No
TX 40
TX 45
TX 50
Max. head width
mm
6.65
7.82
8.83
For screw
M
7-8
8-10
10
Length×length
mm
26×76
29×83
32×95
Pack.
qty
5
5
5
TX-spanners
TX-key
"Teng Tools" TX-keys with T-handle. For internal TX heads. Short key end also has a slot for tamper proof screws.
Art. no.
10180
-0050
-0100
-0209
-0308
Teng Tools 5200 Key no
TX/TPX9
10
15
20
Max. head width
mm
2.50
2.74
3.27
3.86
For screw
M
3
3-3.5
3.5-4
4-5
Spanner length
mm
12x100
12x100
12x100
12x100
Pack.
qty
10
10
10
10
Art. no.
10180
-0407
-0506
-0605
-0704
TX/TPX25
27
30
40
Max. head width
mm
4.43
4.99
5.52
6.65
For screw
M
4.5-5
4.5-6
6-7
7-8
Spanner length
mm
15x150
15x150
15x150
18x190
Pack.
qty
10
10
10
10
Art. no.
10180
-0803
-0902
-1009
TX/TPX45
50
55
Max. head width
mm
7.82
8.83
11.25
For screw
M
8-10
10
12
Spanner length
mm
20x200
20x200
20x200
Pack.
qty
10
10
10
TX-keys in a set
"Teng Tools" Set of 7 keys. In a ring. For internal TX heads Chrome vanadium steel.
Art. no.
10583
-0103
Teng Tools
No
1487
No. of keys
7
Key no
TX
10 15 2025 27 30 40
For max. head width
mm
2.74 3.27 3.86 4.43 4.99 5.52 6.65
For screw
M
3-3.5 3.5-4 4-5 4.5-5 4.5-6 6-7 7-8
Pack.
qty
10
TX-keys in a set
"Luna" Of chrome vanadium steel. For internal heads according to the TX-system. Size markings on the side of the
handle.Hexagon keys of chrome vanadium steel - retractable in the plastic covered steel core handle.
Art. no.
20950
-0107
Number of keys
8
Key-no
TX
9 10 15 20 25 27 30 40
For max. head width mm
2.5, 2.74, 3.27, 3.8 6, 4.43, 4.9 9, 5.5 2, 6.65
For screw
M
3 3-3.5 3.5-4 4-5 4.5-5 4.5-6 6-7 7-8
No of sets
per pack
10
274
Please quote the
Spanners
"Luna" Of chrome vanadium steel. For internal heads according to the TX-system (set TXH-S5 also for screws with
centre points). The shape of the head gives minimal torque transmission losses. Black. Supplied in plastic holder.
Art. no.
20894
-0106
-0205
Luna
No
TXL-5N
TXH-S5
Number of keys
5
5
Key-no
TX
10 20 25 30 40
10 20 25 30 40
For max. head width
mm
2.74 3.86 4.43 5.52 6.65
2.74 3.86 4.43 5.52 6.65
For screw
M
3-3.5 4-5 4.5-5 6-7 7-8
3-3.5 4-5 4.5-5 6-7 7-8
Pack.
-
Hand tools
TX-keys in a set
4
TX-keys in a set
"Teng Tools" Set of 7 TX-keys with T-handle. For internal TX heads (short end also for tamper proof screws).
Art. no.
6892
-0107
Teng Tools
No
TTTX7
No. of keys
ea.
7
Key sizes
TX10 15 20 25 27 30 40
For max. head width
mm
2.74 3.27 3.86 4.43 4.99 5.52 6.65
For screw
M
3-3.5 3.5-4 4-5 4 4.5-54.5-6 6-7 7-8
Case size LxWxH
mm
265x142x50
Weight
kg
0.72
Pack.
set
1
TX-spanners in set
"Teng Tools" For internal TX heads. Chrome vanadium steel. In folding plastic holder.A display supplied with the order of 10 TX spanners sets.
Art. no.
11660
-0107
Teng Tools
No
1479TX
No. of keys
ea.
9
Key-no
TX8 9 10 15 20 25 27 30 40
For max. head width
mm
2.31 2.5 2.74 3.27 3.86 4.43 4.99 5.52 6.65
For screw
M
2.5 3 3-3.5 3.5-4 4-54.5-5 4.5-6 6-7 7-8
No. of sets
per pack.
10
Nut drivers
Nut drivers
"Teng Tools" TT-MV steel shank. 6 point opening. Black ergonomically designed two component handle with hanging
hole.
Art. no.
11268
-0103
-0202
-0301
-0400
-0509
Teng Tools
MDN405
4055
406
407
408
Size
mm
5
5.5
6
7
8
Blade length
mm
125
125
125
125
125
Total length
mm
245
245
245
245
245
Pack.
qty
5
5
5
5
5
Art. no.
11268
-0608
-0707
-0806
-0905
Teng Tools
MDN410
411
412
413
Size
mm
10
11
12
13
Blade length
mm
125
125
125
125
Total length
mm
245
245
245
237
Pack.
qty
5
5
5
5
T handle nut driver
"Teng Tools" T handle nut drivers. Chrome vanadium shank. 6 point opening. Ergonomically designed two component T handle for extra torque.
Art. no.
13218
-0100
-0209
-0308
-0407
Teng Tools
No
MDNT405
MDNT4055
MDNT406
MDNT407
Size
mm
5
5.5
6
7
Total length
mm
288
288
288
288
Pack.
qty
10
10
10
10
Art. no.
13218
-0506
-0605
-0704
-0803
Teng Tools
No
MDNT408
MDNT409
MDNT410
MDNT411
Size
mm
8
9
10
11
Total length
mm
288
288
288
288
Pack.
qty
10
10
10
10
Art. no.
13218
-0902
-1009
-1108
Teng Tools
No
MDNT412
MDNT413
MDNT414
Size
mm
12
13
14
Total length
mm
288
288
288
Pack.
qty
10
10
10
275
Hand tools
4
Spanners
Hose clip screwdrivers
Hose clip screwdriver
"Teng Tools" With flexible, steel spiral. Socket with 6-point openings - adapted to hose clamps. Two-component handle.
Art. no.
11772 -0102
Teng Tools
No MD503A
Size 6-point
mm 7
Total length
mm 270
Pack
qty 10
Hose clip screwdriver
"Teng Tools" With flexible, steel shaft. Double socket with 6 and 7 mm 6 point openings - for hose clips. Two component handle.
Art. no.
6818 -0108
Teng Tools
No MD503
Size 6-point
mm 6 and 7
Total length
mm 260
Pack.
qty 10
Spare socket 6/7 mm
6118 -0207
Pack.
qty 10
Sockets
Box spanner
Art. no.
Teng Tools
Size
Length
Pack.
Art. no.
Teng Tools
Size
Length
Pack.
11837
No
mm
mm
qty
11837
No
mm
mm
qty
"Teng Tools" Made of chrome vanadium steel - hollow of entire length. Double - with different hex openings at each
end. Hole for turning bar. Can also be turned with a spanner. Satin finish.
-0105
-0204
-0303
-0402
-0501
-0600
630607T
630809T
631011T
631213T
631415T
631617T
6x7
8x9
10x11
12x13
14x15
16x17
105
110
120
140
145
155
20
20
15
10
10
6
-0709
-0808
-0907
-1004
-1103
-1202
631819T
632022T
632123T
632427T
632527T
633032T
18x19
20x22
21x23
24x27
25x28
30x32
165
175
185
195
205
210
6
5
5
4
4
4
Turning bar for the above spanners
11837
-2002
-2101
Teng Tools
No
630011
630012
For size
mm
6-19
20-32
Pack.
qty
10
10
Sets
Box spanner set
"Teng Tools" Made of chrome vanadium steel - hollow over entire length. 6 double spanners - with different hex
openings at each end and a turning bar. Can also be turned with a spanner. Satin finish.
Art. no.
11839
-0103
Teng Tools
No
TTTW07
No. of keys
6
Sizes
mm
8x9, 10x11, 12x13, 14x15, 16x17, 18x19
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
sts
1
Drain plug wrenches
Drain plug wrench
"Gedore" Of toughened steel. With nine different sizes for square holes. Suitable for work on gearboxes, differentials,
crankcases and bearings for the most common cars. Chromium-plated.
Art. no.
1084
-0106
Gedore
No
299
Sizes, square
mm
8.7 9.5 10.5 11.5 13
Sizes, square and tapered
mm
6.8-8.7 10.5-13 15.2-18 16.5-19
Screwdriver tip
mm
5.5×18
Length
mm
220
Pack.
qty
10
276
Please quote the
Spanners
Hook spanner
"Gedore" Fixed. With hook for locking nuts according to DIN 1804. Made of special steel. Phosphatized.
Art. no.
1119
-0303
-0402
-0501
-0600
"Gedore 40"For diam.
mm
25/28
30/32
34/36
40/42
Length
mm
135
135
170
170
Pack.
qty
10
10
10
10
Art. no.
1119
-0709
-0808
-0907
-1004
mm
45/50
52/55
58/62
68/75
Length
mm
205
205
240
240
Pack.
qty
10
10
10
10
Art. no.
1119
-1103
-1202
-1301
-1400
mm
80/90
95/100
110/115
120/130
Length
mm
280
280
335
335
Pack.
qty
10
10
1
1
Art. no.
1119
-1509
-1608
-1707
-1806
mm
135/145
155/165
180/195
205/220
Length
mm
385
385
465
465
Pack.
qty
1
1
1
1
Hand tools
Hook spanners
4
Hook spanner
"Gedore" Fixed. With pin for locking nuts according to DIN 1816. Made of special steel. Phosphatized.
Art. no.
1120
-0102
-0151
-0300
-0409
-0508
-0607
"Gedore 40 Z"For diam.
mm
16/18
20/22
25/28
30/32
34/36
40/42
Pin diameter
mm
2.5
2.5
2.9
3.9
3.9
3.9
Length
mm
110
110
135
135
170
170
Pack.
qty
1
1
10
10
10
10
Art. no.
1120
-0706
-0805
-0904
-1001
-1100
-1209
mm
45/50
52/55
58/62
68/75
80/90
95/100
Pin diameter
mm
4.9
4.9
4.9
5.8
5.8
7.8
Length
mm
205
205
240
240
280
280
Pack.
qty
10
10
10
10
10
10
Art. no.
1120
-1308
-1407
-1506
-1605
-1704
-1803
mm
110/115 120/130 135/145 155/165 180/195 205/220
Pin diameter
mm
7.8
7.8
7.8
7.8
9.8
9.8
Length
mm
335
335
385
385
465
465
Pack.
qty
1
1
1
1
1
1
Hook spanner
"Teng Tools" Adjustable. With hook for locking nuts. Chrome vanadium steel.
Art. no.
11202
-0102
-0201
Teng Tools
No
HP101
HP102
For diameter
mm
19-50
32-75
Length
mm
145
178
Pack.
qty
10
10
-0300
HP103
50-120
247
10
Hook spanner
"Teng Tools" Adjustable. With fixed pin for locking nuts. Chrome vanadium steel.
Art. no.
11203
-0101
-0200
-0309
-0408
Teng Tools No
HP2014
HP2015
HP2025
HP2026
For diameter mm
19-50
19-50
32-75
32-75
Pin diam.
mm
4
5
5
6
Length
mm
145
145
178
178
Pack.
qty
10
10
10
10
-0507
HP2036
50-120
6
247
10
-0606
HP2038
50-120
8
247
10
Hook spanner
"Gedore" Adjustable. With two pins for locking nuts. Of chrome vanadium steel. Phosphatized.
Art. no.
2359
-0102
-0201
-0300
-0409
"Gedore 44"For hole
mm
3
4
5
6
Pin size
mm
2.9
3.8
4.8
5.8
Length
mm
178
178
230
230
Pack.
qty
10
10
10
10
-0508
8
7.8
230
10
277
Hand tools
4
Spanners
Plier wrenches
Pliers wrench
"Knipex" With parallel jaws and quick setting by pushing the setting button. Smooth jaws suitable for careful assembly of fittings with treated surfaces. The jaw action makes it possible to work with the pliers wrench as a pair of
pliers without changing the setting. The narrow head gives and assured grip even in confined areas. Chrome vanadium
steel. Plastic covered handles.
Art. no.
2717
-0059
-0109
-0208
Knipex-no
8603180
250
300
Length
mm
180
250
300
Grip size, variable setting.
mm
0-35
0-46
0-60
Pack.
qty
6
6
6
Ditto bulk pack
2717
-2006
-2105
Pack.
-
Adjustable wrenches
Adjustable wrench
"Teng Tools" With gauge. Chrome vanadium steel. The outer part of the jaws are tapered - facilitates gripping.
Hole in the end of the handle. Phosphate finish.
Art. no.
10587
-0059
-0109
-0208
-0307
Teng Tools
No
40014001
4002
4003
4004
Size
mm
1717
24
28
33
Length
mm
100100
150
200
250
Pack.
qty
10
10
6
6
Dito chromed
10587
-1008
-1107
Teng Tools
Nr
4001CF
4002CF
Pack.
qty
10
10
Art. no.
10587
-0406
-0505
-0604
-0703
Teng Tools
No
4005
4006
4007
4008
Size
mm
38
50
60
70
Length
mm
300
375
450
600
Pack.
qty
6
5
6
1
Dito chromed
10587
-1404
-1503
Teng Tools
Nr
4005CF
4006CF
Pack.
qty
6
5
-
Adjustable wrench
"Irega" With gauge.Made of chrome vanadium steel. 15° jaw angle. The outer part of the jaws is tapered to give
better grip. The contact surface of the adjustable jaw has a ground sliding surface for smooth and accurate setting. Large
adjuster screw for quick setting. Hole in the end of the handle. Phosphatized.
Brochure on request 2660-9990.
Art. no.
2660
-0106
-0205
-0304
Irega 99Gap width
mm
13
19
24
Max. tightening torque
Nm
68
164
305
Length
mm
114
159
206
Pack.
qty
10
10
10
Slider
2660
-1104
Pack.
qty
1
Adjuster screw set
2660
-2003
-2102
Pack.
qty
1
1
Art. no.
2660
-0403
-0502
-0601
Irega 99Gap width
mm
29
34
43
Nm
508
864
1695
Length
mm
257
309
385
Pack.
qty
10
5
1
Slider
2660
-1302
-1500
Pack.
qty
1
1
Adjuster screw set
2660
-2300
-2508
Pack.
qty
1
1
Art. no.
2660
-0700
Irega 99Gap width
mm
53
Nm
2260
Length
mm
461
Pack.
qty
1
Slider
2660
-1609
Pack.
qty
1
Adjuster screw set
2660
-2607
Pack.
qty
1
278
Please quote the
Tool boxes - Tool sets
"Irega" Equipped with ergonomic, two-component rubber/thermoplastic handle for safe and firm grip. With
gauge.Chrome vanadium steel. 15° jaw angle. The outer part of the jaws is tapered to give better grip. The contact
surface of the adjustable jaw has a ground sliding surface for smooth and accurate setting. Large adjuster screw for quick
setting. Hole in the end of the handle. Phosphatized.
Art. no.
10682
-0103
-0202
-0301
-0400
Irega 99ETGap width
mm
19
24
29
34
Nm
164
305
508
864
Length
mm
162
209
260
312
Pack.
qty
6
6
6
6
Separate two-component handle
10682
-0509
-0608
-0707
-0806
Pack.
qty
1
1
1
1
Hand tools
Adjustable wrench
4
Adjustable wrench
"Irega" A 50% lighter adjustable wrench is a standard model with equivalent opening or an adjustable wrench with 62%
larger opening than a standard adjustable wrench with equivalent length. With gauge. Chrome vanadium steel. 15° jaw
angle. Tapered jaws for good accessibility. Ergonomic two-component handle for assured and firm grip. Phosphatized.
Art. no.
13855
-0108
Irega
No
SWO 99
Opening width
mm
39
Nm
305
Length
mm
209
Pack.
qty
6
Tool boxes
Tool box
"Teng Tools" Of red lacquered steel plate. Five compartments. Lockable with padlock.
Art. no.
11244
-0102
Teng Tools
No
TC422
Length
mm
560
Width
mm
205
Height
mm
205
Weight
kg
7.0
Pack.
qty
1
Tool box
"Teng Tools" Of red lacquered steel plate. Equipped with 3 extending, lockable drawers fitted with ball bearing slides
(height: 2 x 50 mm and 1 x 75 mm). Lock with 2 keys supplied. Heavy-duty carrying handles at the ends. Rubber feet
under the chest. Each drawer holds 4 Teng Tools TC trays.
Art. no.
12236
-0100
Teng Tools
No
TC803N
Max. load per drawer (evenly distributed)
kg
20
Width
mm
660
Depth
mm
305
Height
mm
250
Weight
kg
13.8
Pack.
qty
1
Handle for extensible tray
12236
-1009
Teng Tools
No
TC803N-12
Pack.
sts
5
Tool box
"Teng Tools" Of red lacquered steel plate. Equipped with 3 extending, drawers fitted with ball bearing slides, and with
removable top tray. Lockable lock/front which covers the top of the drawer and the extending drawers. Lock with two
keys supplied. Heavy-duty carrying handle at ends.
Art. no.
12846
-0102
Teng Tools
No
TC803NF
kg
20
Width
mm
660
Depth
mm
305
Height
mm
380
Weight
kg
22
Pack.
qty
1
279
Hand tools
4
Tool box
"Teng Tools" Of red lacquered steel plate. Equipped with 5 extra deep, extending drawers with ball bearing slides
(height: 2 x 46 mm, 3 x 75 mm). Each drawer holds 4 TT and 1 TTX inserts. Lockable cover (incl. top drawer in plastic
with aluminium handle) and boxes. Lock with 2 keys supplied. Heavy-duty carrying handles at the ends. Rubber feet under the chest.
Art. no.
12219
-0101
Teng Tools
No
TC805NFX
kg
20
Width
mm
660
Depth
mm
640
Height
mm
490
Weight
kg
44
Pack.
qty
1
Tool box
"Teng Tools" Of red lacquered steel plate. Equipped with six extending, drawers fitted with ball bearing slides (height:
5 x 50 mm 1 x 75 mm) and removable top drawer. Made of plastic with aluminium handle. Lockable lock/front which
covers the top of the drawer and the extending drawers. Lock with two keys supplied. Heavy-duty carrying handles at
the ends.
Art. no.
12216
-0104
Teng Tools
No
TC806NF
kg
20
Drawer dimensions (3)
mm
172x270x50
mm
572x270x50
mm
572x270x75
Width
mm
660
Depth
mm
305
Height
mm
380
Weight
kg
22
Pack.
qty
1
Tool trolleys Teng Tools
Tool trolley
"Teng Tools" Of red lacquered steel plate. With two fixed castors and two swivel castors with brakes. Equipped with
6 extending, lockable drawers on ball-bearing slides (height: 5 x 75 mm, 1 x 150 mm). Each drawer has a protective mat
in the bottom. Workbench with ABS top mat. Heavy-duty handle for transporting the trolley.
Art. no.
12217
-0103
Teng Tools
No
TCW806N
Drawer size (5)
mm
572x380x75
Drawer size (1)
mm
572x380x150
kg
25
Trolley size
mm
670x460x760
Wheel diameter
mm
100
Weight
kg
59
Pack.
qty
1
Tool trolley
"Teng Tools" Of red lacquered steel plate. With two fixed castors and two swivel castors with brakes. Equipped with
7 extending, lockable drawers fitted with ball bearing slides. Each drawer has a protective mat in the bottom. Heavyduty handle for transporting the trolley. Workbench with ABS top mat.
Art. no.
12218
-0102
Teng Tools
No
TCW807N
Drawer size (5)
mm
575x380x75
Drawer size (2)
mm
575x380x150
kg
25
Trolley size
mm
670x460x950
Wheel diameter
mm
125
Weight
kg
64
Pack.
qty
1
Tool trolley
"Teng Tools" Of red lacquered steel plate. With four swivel castors. Equipped with 8 lockable drawers fitted with
ball bearing slides. Each drawer has a protective mat in the bottom. Heavy-duty handle for transporting the trolley.
Worktop with ABS-top mat.
Art. no.
12873
-0108
Teng Tools
No
TCW808N
mm
575x380x75
mm
575x380x150
kg
25
Trolley size
mm
670x460x813
Wheel diameter
mm
125
Weight
kg
61
Pack.
qty
1
280
Please quote the
"Teng Tools" With four swivel castors. Equipped with 10 extending, lockable drawers fitted with ball bearing slides
(height: 6 x 50 mm, 3 x 75 mm 1 x 150 mm). Each drawer has a protective mat in the bottom. Heavy/duty handle for
transporting the trolley. The work top is equipped with an ABS mat.
art. no.
12238
-0108
Teng Tools
No
TCW810N
Drawer size (6)
mm
575x380x50
Drawer size (3)
mm
575x380x75
Drawer size (1)
mm
575x380x150
kg
25
Trolley size LxWxH
mm
750x465x950
Wheel diameter
mm
125
Weight
kg
69
Pack.
qty
1
Hand tools
Tool trolley
4
Tool trolley
"Teng Tools" Of red lacquered steel plate. With four swivel castors of which two have brakes. Equipped with 13
lockable drawers on ball-bearing slides. Each drawer has a protective mat in the bottom. Heavy-duty handle for transporting the trolley. Worktop with ABS-top mat.
Art. no.
12847
-0101
Teng Tools
No
TCW713
mm
930x380x150
mm
575x380x75
mm
575x380x150
mm
287x380x75
mm
287x380x150
Max. load 930 mm drawer (evenly distributed)
kg
35
kg
25
kg
20
Trolley size
mm
1060x460x980
Wheel diameter
mm
100
Weight
kg
152
Pack.
qty
1
Tool trolley
"Teng Tools" Of red lacquered steel plate. With four swivel castors of which two are fitted with brakes. Equipped
with 13 lockable drawers fitted with ball bearing slides. Each drawer has a protective mat in the bottom. Heavy-duty
handle for transporting the trolley. Worktop with ABS-top mat.
Art. no.
12848
-0100
Teng Tools
No
TCW813N
mm
1216x380x15
mm
575x380x75
mm
575x380x150
kg
45
kg
25
Trolley size
mm
1348x460x1145
Wheel diameter
mm
150
Weight
kg
166
Pack.
qty
1
Accessory to trolleys and boxes
Wood plate for roller cabinets
"Teng Tools" Wood plate for roller cabinets TCW806LN and TCW809N.
Art. no.
15136
Teng Tools
No
Size
mm
Pack.
-0104
TC-TB01
1342x450x37
-
Bumpers for tool trolleys
"Teng Tools" Bumpers for tool trolleys. Fitted to prevent paint and body damage when moving the trolley.
Art. no.
12222
-0106
Teng Tools
No
TCBP
Pack.
qty
1
Side table/paper holder
"Teng Tools" Side table and paper holder for attaching to the side of a Teng Tools tool trolley.
Art. no.
11756
-0102
Teng Tools
No
TCA01
Table size
mm
370x370
Max. paper roll width
mm
360
Pack.
qty
1
281
Hand tools
4
Cover for top drawer and tool set
"Teng Tools" Nylon cover suitable for Teng Tools top drawers, Mega Master tool sets and tool trolleys.
Art. no.
14401
-0105
-0204
-0303
Teng Tools
No
TC-Cover
TC-Cover1
TC-WC02
Fits
top drawers
TCMM1001N set
tool trolleys
Pack.
qty
1
1
1
Set of dividers for tool trolleys
"Teng Tools" Four black dividers for extending drawers in tool trolleys.
Art. no.
12225
Teng Tools
No
Size (2)
mm
Size (2)
mm
Pack.
sts
-0103
TCDIVL
570x40x3
375x40x3
1
Magnetic strip
"Teng Tools" Magnetic strip that secures magnetic tool such as screwdrivers, spanners etc.
Art. no.
0345
-0202
Teng Tools
No
TC-MAG
Size
mm
457x52
Pack.
qty
12
Lock set
"Teng Tools" A set of 5 locks, but only one key (plus spare key). Practical for those with a storage set consisting of
a tool trolley, middle box and top box and who only want one key all the locks. Contains 3 standard locks, 2 locks with
rail as well as a key for converting for all standard trolleys and boxes.
Art. no.
11023
-0109
Teng Tools
No
TC-LOCK5
Pack.
set
1
Set of castors for tool trolleys
"Teng Tools" Set of 2 swivel castors with mounting plate. Suitable for Teng Tools 3, 5 and 6-drawer tool trolleys.
Intended to replace the tool trolleys 2 fixed castors when the trolley needs to be easily moved, e.g. under a workbench.
Art. no.
11266
-0105
Teng Tools
No
TCW-SW
Wheel diameter
mm
100
Max. load per castor
kg
80
Pack.
qty
1
Lock set with 3 locks for tool sets
"Teng Tools" Lock set of 3 locks with 1 set of spanners. Suitable for tool sets TCMM1001N and TCMM715N.
Art. no.
14406
-0100
Teng Tools
No
TC-LOCK3
Pack.
set
1
Key blank, 3-packNo master
14406
-1009
Teng ToolsNo master
NoNo master
TC-BKEYNo master
Pack.No master
set
1
282
Please quote the
"Teng Tools" Set of 4 black castors with needle bearings and securing base. 2 fixed and 2 swivel with 2-stage brake.
Suitable for Teng Tools tool trolleys.
Art. no.
12223
-0105
Teng Tools
No
TCNBC
Castor diameter x castor width
mm
125x50
Max. load per castor
kg
170
Max. load per 4 castors
kg
500
Pack.
sts
1
Hand tools
4 swivel castors with 2-stage brake
4
TC modules
Drawer inserts
Storage box
"Teng Tools" TC tray with compartment divisions. Made of plastic with removable lock. Several boxes can be interconnected. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
0416
-0206
Teng Tools
No
TT01
Length
mm
265
Width
mm
142
Height
mm
50
Case size LxWxH
mm
265x142x50
Weight
kg
0.29
Pack.
qty
1
Socket set with ¼" square-drive
Socket set. With ¼" square-drive
"Teng Tools" Set containing 11 short 6 point sockets, 6 long 6 point sockets, 11 screwdriver bits, ratchet handle,
universal joint, 2 extension bars, ¼" bit socket, adaptor drive 3/8"-¼" and ¼" screwdriver handle.
Art. no.
0349
-0109
Teng Tools
No
TT1435
Number of pieces
ea.
35
Sockets, short (11)
mm
4 5 5.5 6 7 8 9 10 11 12 13
Sockets, deep (6)
mm
6 7 8 10 12 13
mm
0.8x4 1.2x5.5
Bits for Phillip heads
No
12
No
12
Bits for TX heads
No
TPX 10 TPX 15 TPX20
Bit for hex holes
mm
56
Case size LxWxH
mm
265x142x50
Weight
kg
1.0
Pack.
set
1
Socket set with 3/8" square-drive
Socket set. With 3/8" square-drive
"Teng Tools" Set containing 13 pcs 6 point sockets, ratchet handle, universal joint, extension bar 75 mm, screwdriver
handle 250 mm long with 3/8" square-drive at both ends, adaptor drive ½"-3/8" and ¼" bit socket.
Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxes and tool trolleys.
Art. no
0352
-0103
Teng Tools
No
TT3819
Measurement system
Millimetre
No. of pieces
ea.
19
Sockets (13)
mm
8 9 10 11 12 13 14 15 16 17 18 19 22
Case size LxWxH
mm
265x142x50
Weight
kg
1.0
Pack
set
1
Socket set with 3/8" square-drive
Socket set 3/8" square-drive
"Teng Tools" Set containing 16 pcs 6 point deep sockets with 3/8" square-drive. Satin finish.
Supplied in plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
14430
-0100
Teng Tools
No
TT3816
Number of socskets
qty
16
Socket size (6-point)
mm
7 8 9 10 11 12 13 14 15 16 17 1819 20 21 22
Case size LxWxH
mm
265x142x50
Weight
kg
1.5
Pack
sts
1
283
Hand tools
4
Socket set with ¼" and 3/8" square-drive
Socket set. With ¼" and 3/8" square drive
"Teng Tools" Set containing ¼" and 3/8" 6-point sockets - short and deep.
Art. no.
6861
-0104
Teng Tools
No
TTAF32
Measurement system
Inch
No. of pieces
ea.
32
Sockets ¼" short
inch
3/16 7/32 ¼ 9/32 5/16 11/32 3/8 7/16 ½
Sockets ¼" deep
inch
3/16 7/32 ¼ 9/32 5/16 11/32 3/8 7/16 ½
Sockets 3/8" short
inch
3/8 7/16 ½ 9/16 5/8 11/16 ¾
Sockets 3/8" deep
inch
3/8 7/16 ½ 9/16 5/8 11/16 ¾
Case size LxWxH
mm
265x142x50
Weight
kg
1.4
Pack.
set
1
TX bits in set with ¼" and 3/8" square-drive
"Teng Tools" 30 piece bit socket set. Consisting of adaptor drive 3/8" - ¼ ", extension bar 3/8" length 75 mm and 28
socket bits for internal and external TX heads.
Art. no.
10214
-0100
Teng Tools
No
TTTX30
Adaptor drive
inch
3/8-¼
Extension bar, length
mm
75
TX-bits3/8"
TX10 15 20 25 27 30 40 45 50
TX-bits3/8"
TPX10 15 20 25 27 30 40 45 50
TX-bits3/8"
E10 12 14 16 18
TX-bits ¼"
E45678
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
sts
1
Bit socket set with ¼" and 3/8" square-drive
Socket and bits set with ¼" and 3/8" square drives
"Teng Tools" Set of 35 pieces. Contains 33 ¼" and 3/8" bit sockets, one adaptor drive (enlarger) ¼"-3/8" and one
adaptor drive (reducer) 3/8" - ¼".
Supplied in plastic case with removable lid. Fits in Teng Tools tool boxes and tool trolleys.
Art. no
13215
-0103
Teng Tools
No
TTBS35
No. of pieces
ea.
35
Bit sockets 1/4" for slotted heads
mm
0123
Bit sockets 1/4" for Phillips cross heads
No
4 4.5 7
Bit sockets 1/4" for Pozidriv cross heads
No
123
Bit sockets 1/4" for TX-heads
No
10 15 20 25 27 30 40
Bit sockets 3/8" for female hex head
mm
3 4 5 5.5 6 7 8 10 12
inch
1/8 5/32 3/16 7/32 ¼ 5/16 3/8
Case dim. LxWxH
mm
265x142x50
Weight
kg
1.25
Pack
sts
1
Ratchet handle sets
Ratchet handle set. With ½" square-drive
"Teng Tools" Ratchet handle set containing ratchet handle reversible with lever and with locking button as well as
quick release and shifting of sockets. Also includes universal joint and two extension bars. All with ½" square-drive. The
set is supplied in a plastic TC tray with removable cover. The cases fit in Teng Tools tool boxes and tool trolleys.
Art. no.
0357
-0108
Teng Tools
No
TT1205
Extension bars, length
mm
125, 250
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
set
1
284
Please quote the
"Teng Tools" Set with 3 ratchet handles. The ratchet handles have 72 teeth, are adjustable using a reversing lever and
equipped with a button for locking, removing/switching sockets. Matt chromium plated. Two component handle. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
12821
-0101
Teng Tools
No
TT7203
Drive square
inch
¼, 3/8, ½
Lengths
mm
142, 211, 257
Case size LxWxH
mm
265x142x50
Weight
kg
0.9
Pack.
set
1
Hand tools
Ratchet handle set
4
Push through socket set, 3/8" square-drive
Socket set with 19 mm hex. ext. drive
"Teng Tools" Set of 16 pieces, mainly for tightening nuts on stud bolts. Contains sockets with 19 mm external hexagonal drive which fits the ratchet handle (the sockets have through holes) 3" extension bars, ratchet handle with 19
mm internal hex. openings, 3/8" adapter, universal joint, and spark plug sockets 16 and 21 mm.
Art. no.
14389
-0101
Teng Tools
No
TTTH16
Drive ext. hexagon
mm
19
Socket dimensions, 6-hexagon
mm
10, 11, 12, 13, 14, 15, 16, 17, 18, 19
mm
75
Open ratchet handle with int. hex. drive
mm
19
Adaptor
inch
3/8
Universal joint
inch
3/8
Spark plug socket
mm
16 and 21
Insert size LxWxH
mm
265x142x50
Weight
kg
1.35
Pack.
set
1
Socket sets with ½"-drive
Socket set. With ½" square-drive
"Teng Tools" Set with 10 metric bi-hexagon sockets with ½" square-drive and a swivel handle.
Art. no.
12209
-0103
Teng Tools
No
TT1211
Sockets dim.
mm
10 11 12 13 14 15 16 17 18 19
Swivel handle with ½" square-drive, length
mm
250
Case size LxWxH
mm
265x142x50
Weight
kg
2.0
Pack.
qty
1
"Teng Tools" Socket set containing 17 12 point sockets. The set is supplied in a plastic TC tray with removable cover.
The cases fit in Teng Tools tool boxes and tool trolleys.
Art. no.
0357
-0207
-0256
Teng Tools
No
TT1217
TT1217-6
Measurement system
Metric
Metric
No. of pieces
st
17
17
Socket system
12 point
6 point
Sockets dim.
mm
10 11 12 13 14 15 16 17 18 19 10 11 12 13 14 15 16 17 18 19
20 21 22 24 27 30 32
20 21 22 24 27 30 32
Case size LxWxH
mm
265x142x50
265x142x50
Weight
kg
1.65
1.65
"Teng Tools" Set containing 12 sockets with 12-point or 6-point openings. Also includes ratchet handle with reversing
thumb lever, extension bars 62 and 150 mm, adaptor drive 3/8-½" as well as a universal joint.
Supplied in a plastic TC tray with removable cover. The cases fit in Teng Tools tool boxes and tool trolleys.
Art. no.
3918
-0104
-0203
Teng Tools
No
TT1218
TT1218-6
Measurement system
Millimetre
Millimetre
Socket type
12-point
6-point
No. of pieces
ea.
17
17
Sockets dim. (12)
mm
10 11 12 13 14 15 16 17 18 19 22 24 10 11 12 13 14 15 16 17 18 19 22 24
Case size LxWxH
mm
265x142x50
265x142x50
Weight
kg
2.15
2.15
Pack.
set
1
1
285
Hand tools
4
Socket set with ½" square-drive
"Teng Tools" Socket set containing 15 12 point sockets. The set is supplied in a plastic TC tray with removable cover.
The case fit in Teng Tools tool boxes and tool trolleys.
Art. no.
0357
-0306
Teng Tools
No
TT1215AF
Measurement system
Amerikansk AF
No. of pieces
15
Sockets dim.
inch
3/8 7/16 ½ 9/16 5/8 11/16 13/16 7/8
15/16 11/16 11/8 13/16 1¼
Case size LxWxH
mm
265x142x50
Weight
kg
1.7
Pack.
set
1
Socket set for int. hexagon holes with ½" square-drive
Sockets in set for int. hex holes. With ½" square-drive.
"Teng Tools" Set consisting of 20 sockets for internal hex holes, (short and long bits). In addition, includes 2 adaptors and a hexagon screwdriver. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
6885
-0106
Teng Tools
No
TTHEX23
Bits 10 mm hex-drive, length 40 mm
mm
5 6 7 8 9 10
mm
12 14 17 19
mm
5 6 7 8 9 10
mm
12 14 17 19
Adaptor
½" square - 10 mm hex
Adaptor
Hexagon screwdriver
mm
2.0
Case size
mm
265x142x50
Weight
kg
1.1
Pack.
set
1
TX-sockets in set. for inv. slotted heads, with ½" square-drive
TX bits in set. With ½" square-drive.
"Teng Tools" Set consisting of 20 bits (short and long) for internal TX heads TX-system. For hand tightening. In
addition, includes two adaptors and a hexagon screwdriver.
Art. no.
6886
-0105
Teng Tools
No
TTTX23
No. of pieces
ea.
23
Bits 10 mm hex-drive length 40 mm
TX
20 25 27 30 40 45 50 55
TX
60 70
TX
20 25 27 30 40 45 50 55
TX
60 70
Bit socket
Bit socket
Hexagon screwdriver
mm
2.0
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
set
1
Socketbits in set for TX head and int. hexagon holes, ½" square-drive
Socket bits in set. With ½" square-drive.
"Teng Tools" Set consisting of fifteen 100 mm long bit sockets, nine for internal TX heads and six for hex type bits.
Satin finish. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
11889
-0102
Teng Tools
No
TTTXH15
No. of pieces
ea.
15
Sockets for int. TX heads
TX
20 25 27 30 40 45 50 55 60
Sockets for int. hex holes
mm
5 6 7 8 10 12
Case size LxWxH
mm
265x142x50
Weight
kg
1.4
Pack.
sts
1
286
Please quote the
Extension bars in set
"Teng Tools" Set containing 6 extension bars (drive ¼", 3/8" and ½"), universal joints ¼", 3/8" and ½", adaptor 3/8"¼", as well as a T-handle and mini screwdrivers for hex holes (2.0 and 2.5 mm).
As an accessory there is a handle for fitting to the extension bar. A short extension bar is placed in the hole as the handle
on the larger. Together with these extension bars and handle T-HD a T-handle is formed.
Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
6887
-0104
Teng Tools
No
TTXEXT13
Extension bars ¼", length
mm
150 and 300
Extension bars 3/8", length
mm
75 and 500
Extension bars ½", length
mm
75 and 500
Case size LxWxH
mm
560x110x40
Weight
kg
2.0
Pack.
set
1
Separate handle T-HD
6887
-0203
Pack.
qty
1
Hand tools
Extension bars in sets
4
Extension bars and ratchet handle in set
"Teng Tools" Set containing ratchet handle with flip reverse lever and removable ratchet head, two extension bars
as well as a T-handle. All with ¾"-drive. Supplied in TTX tray suitable for Teng Tools tool boxes and tool trolleys.
Art. no.
10153
-0103
Teng Tools
No
TTX3404
Extension bars ¾" square-drive, length
mm
200, 400
Case size LxWxH
mm
560x110x40
Weight
kg
6.1
Pack.
set
1
Sockets in sets with ¾" square-drive
Socket set. With ¾" square-drive
"Teng Tools" Chrome vanadium steel. Set containing 14 millimetre sockets with 6 point openings.
Supplied in TC tray suitable for Teng Tools tool boxes and tool trolleys.
Art. no.
10154
-0102
Teng Tools
No
TTX3414
Size
mm
19 21 22 24 27 30 32 33 34 36 38 41 46 50
Case size LxWxH
mm
560x110x40
Weight
kg
5.5
Pack.
set
1
Socket set. With ¾" square-drive
"Teng Tools" Chrome vanadium steel. Set containing 14 inch sockets with 12 point openings.
Supplied in TC tray suitable for Teng Tools tool boxes and tool trolleys.
Art. no.
10154
-0201
Teng Tools
No
TTX 34AF
Size
inch
7/8 15/16 1 11/16 11/8 13/16 1¼15/16 13/8
17/16 1½ 15/8 1¾ 17/8
Case size LxWxH
mm
560x110x40
Weight
kg
5.5
Pack.
set
1
Combination spanner sets
trolleys. As an accessory there is a metal ring/carrying handle that keeps the spanners together, art. no 2756-0200.
Art. no.
2756
-0101
Teng Tools
No
TT1236
No. of keys
12
Sizes
mm
8 9 10 11 12 13 14 15 16 17 18 19
Case size LxWxH
mm
265x142x50
Weight
kg
1.7
Pack.
set
1
287
Hand tools
4
trolleys. As an accessory there is a metal ring/carrying handle that keeps the spanners together, art. no 2756-0200.
Art. no.
5805
-0303
Teng Tools
No
TT3592
No. of keys
8
Sizes
inch
5/16 3/8 7/16 ½ 9/16 5/8 11/16 ¾
Case size LxWxH
mm
265x142x50
Weight
kg
0.7
Pack.
set
1
"Teng Tools" Set of 7 combination spanners in AF sizes. Chrome vanadium steel. Same dimension at both ends. The
12 point ring head is angled at a 15° angle. Polished heads. Satin finish.
Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
6891
-0207
Teng Tools
No
TTX2640
No. of keys
7
Measurement system
AF
Sizes
inch
13/16 7/8 15/16 1 11/16 11/8 1¼
Case size LxWxH
mm
560x110x40
Weight
kg
2.6
Pack.
set
1
Combination ring ratchet spanner set
Combination ring ratchet spanners in set
"Teng Tools" Set of 8 ratcheting combinatiuon spanners. Chrome vanadium steel. Combined ringopen-ended spanner and 12 point ring ratchet. Reversible ratchet function with lever. Same size at both ends.
Art. no.
10973
-0101
-0200
Teng Tools
No
TT6508R
TT6508RAF
No. of keys
qty
8
8
Sizes
mm/inch
8 10 11 12 13 14 17 19
5/16 3/8 7/16 ½ 9/16 5/8 11/16 ¾
Case size LxWxH
mm
265x142x50
265x142x50
Weight
kg
1.1
1.1
Pack.
set
1
1
Swivel-joint combination spanners in sets
"Teng Tools" Set of 8 swivel combination ring ratchet spanners made of chrome vanadium steel. The ring end swivels 180°. Same size at both ends. Straight spanners are turned when shifting between right and left-hand action.
Supplied in plastic case with removable lock. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
13190
-0102
Teng Tools
No
TT6508RF
No. of keys
ea.
8
Sizes
mm
8 10 11 12 13 14 17 19
Case dim. LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
set
1
Combination spanner set - Stubby
"Teng Tools" "Stubby"model. Short spanners made of chrome vanadium steel. Same dimension at both ends. The 12point ring head is set at a 15° angle. Satin finish.
Art. no.
10947
-0104
Teng Tools
No
TT6010M
No. of spanners
10
Sizes
mm
10 11 12 13 14 15 16 17 18 19
Case size LxWxH
mm
265x142x50
Weight
kg
1.0
Pack.
set
1
288
Please quote the
"Teng Tools" Set of 8 double open ended spanners. Chrome vanadium steel. Polished heads.
Art. no.
0390
-0107
Teng Tools
No
TT6208
No. of keys
8
Measurement system
Metric
Sizes
mm
6×7 8×9 10×11 12×13 14×15 16×17 18×19 20×22
Case size LxWxH
mm
265x142x50
Weight
kg
0.8
Pack.
set
1
Hand tools
4
Doubel flex wrench set
Double flex wrench set
"Teng Tools" Chrome vanadium steel. Double, with different size 12 point sockets at each end. Satin finish. Supplied
Art. no.
7300
-0101
Teng Tools
No
TT6506
No. of keys
6
Sizes
mm
8×9 10×11 12×13 14×15 16×17 18×19
Case size LxWxH
mm
265x142x50
Weight
kg
1.57
Pack.
qty
10
Box spanner set
Box spanner set
Art. no.
11839
-0103
Teng Tools
No
TTTW07
No. of keys
6
Sizes
mm
8x9, 10x11, 12x13, 14x15, 16x17, 18x19
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
sts
1
Nut drivers in set
Nut drivers in set
"Teng Tools" 9 nut drivers with chrome vanadium steel blade. 6 point opening. 2 colour ergonomically designed two
component handle with hanging hole. Supplied in plastic box which fits in Teng Tools tool boxes and tool trolleys.
Art. no.
11459
-0102
Teng Tools
No
TTXMDN
Sizes
mm
5 5.5 6 7 8 10 11 12 13
Total length of screwdrivers
mm
245
Insert size
mm
560x110x40
Weight
kg
1.6
Pack.
set
1
Torque screwdriver set
Torque screwdriver set
"Teng Tools" The set includes one torque screwdriver, ¼" extension bar 100 mm, bit holder and 36 different bits.
Art. no.
12250
-0101
Teng Tools
No
TTSD39
Torque screwdriver ¼"-hex for
Nm
1-5
Extension bar ¼"- square
mm
100
mm
0.5x3 0.6x4.5 0.8x5.5 1.2x6.5
No
0123
No
0123
Bits for TX-heads
TX
8 9 10 15 20 25 27 30 40
Bits for TX-heads
TPX
10 15 20 25 30
No
0123
Bits for Grabber heads PH
No
2 (2)
Bits for hex holes
mm
23456
Case size LxWxH
mm
265x142x50
Weight
kg
0.66
Pack.
sts
1
289
Hand tools
4
Torque wrench
Torque wrench
"Teng Tools" With ratchet - by which the torque wrench can be used for both full tightening, and the final check
of the tightening torque. Reversible with lever, but only right-hand action for torque checking. Equipped with angle gauge
for post tightening. Graduated in Nm and lbs-foot. Lockable setting. Accuracy ± 4%. Satin finish for the torque setting
to be easier to read. Degree scale for post tightening of cylinder heads, etc.
Supplied in plastic case with space for sockets. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
7319
-0100
Teng Tools
No
TTX1292
For tightening torque
Nm /(lbf-foot)
40-210 / (30-150)
Drive dimension square
inch
½
Length
mm
465
Case size LxWxH
mm
560x110x40
Weight
kg
1.65
Preset torque wrench
Preset torque wrenches - ½" square-drive
"Teng Tools" Set of four preset torque wrenches. According to ISO 6789. Accuracy ±4%. Satin finsih. Rubber handle. Separate wall rack included. Supplied in PS tray suitable for Teng Tools tool boxes and tool trolleys.
Art. no.
14386
-0104
Teng Tools
No
TTPSTQ04
Number of torque wrenches
qty
4
Square drive
inch
½
Preset torque
Nm
90, 110, 120, 140
Length of torque wrenches
mm
513
Case size LxWxH
mm
570x262x73
Weight
kg
5.8
Pack.
1
Screwdriver sets
Screwdriver set
"Teng Tools" Set of 12 pieces. Contains one screwdriver handle and 11 separate reversible screwdriver blades with
a screwdriver tip at each end. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool
trolleys.
Art. no.
12865
-0108
Teng Tools
No
TTMD12D
No. of pieces
ea.
12
Combi-blade
PH1 x PH2
Combi-blade
flat 4.0 mm x 5.5 mm
Combi-blade
PH1 x 6.5 mm flat
Combi-blade
PZ1 x PZ2
Combi-blade
TX10 x TX15
Combi-blade
TX20 x TX25
Combi-blade
TX30 x TX40
Combi-blade
Combi-blade
Combi-blade
Combi-blade
Insert size LxWxH
mm
265x142x50
Weight
kg
0.25
Pack.
sts
1
Impact screwdriver set
Impact screwdriver
"Teng Tools" Set containing ½" impact driver, bit socket, adaptor hex 5/16"-3/8 "square as well as 17 bits.
Art. no.
10210
-0104
Teng Tools
No
TTID20
For bits with drive
hex inch
5/16
mm
1.4x6 1.4x8 2.2x10 1.8x12
No
1234
mm
4568
Bits for TX heads
TX30 40 45 50 55
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
set
1
Spare adaptor 3/8" square - 5/16" hex
10210
-0203
Pack.
qty
10
290
Please quote the
Impact socket set with ¼" and 3/8" square drives
"Teng Tools" 24 piece impact socket set. Contains 5 ¼" short sockets, 9 short sockets 3/8", 9 long sockets 3/8" and
one adaptor 3/8"-¼". Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no
13247
-0105
Teng Tools
No
TT9024
Short sockets, ¼" square drive
mm
6 7 8 10 13
Short sockets, 3/8" square drive
mm
8 10 11 12 13 14 16 17 19
Long sockets, 3/8" square drive
mm
8 10 11 12 13 14 16 17 19
Adaptor drive
inch
3/8-¼
Case dim. LxWxH
mm
265x142x50
Weight
kg
1.07
Pack
set
1
Hand tools
Impact socket set with ¼" and 3/8" square-drive
4
Impact bit set
Impact bit set TX
"Teng Tools" Set of twelve ½" impact bits for internal TX heads.
Supplied in a plastic TC tray with removable cover that fits in Teng Tools tool boxes and tool trolleys.
Art. no.
12813
-0101
Teng Tools
No
TT9212TX
No. of socket bits
ea.
12
TX-size
TX10 15 20 25 27 30 40 45 50 55 60 70
Case size LxWxH
mm
265x142x50
Weight
kg
0.9
Pack.
set
1
Impact socket set with ½" square-drive
Impact sockets in set. With ½" square-drive
"Teng Tools" Set containing 16 ½" drive impact sockets - regular and deep.
Art. no.
6880
-0101
Teng Tools
No
TT9116
Drive square
inch
½
Socket sizes. short sockets
mm
13 15 16 17 18 19 22 24
Socket sizes. deep sockets
mm
13 15 16 17 18 19 22 24
Case size LxWxH
mm
265x142x50
Weight
kg
2.2
Pack.
set
1
Impact sockets in set with ¾" square-drive
Impact sockets with ¾" square-drive
"Teng Tools" Set of ¾" impact sockets - 8 regular and 7 deep as per DIN-standard.
Art. no.
12208
-0104
Teng Tools
No
TTX9415
Drive
inch
¾
Short sockets, size
mm
19 24 27 28 30 32 34 36
Deep sockets, size
mm
19 24 27 30 32 33 36
Case size LxWxH
mm
560x110x60
Weight
kg
9.0
Pack.
qty
1
Set of pliers
Set of universal pliers
"Teng Tools" Set of five self-locking pliers with release lever. Three with serrated, adjustable jaws with pipe grip and
cutters and two with extra narrow, long jaws with smooth grip and cutter.
Art. no.
12248
-0106
Teng Tools
No
TTVG05
Universal pliers 401, lengths
mm
100, 175, 250
Universal pliers 404, lengths
mm
100, 150
Case size LxWxH
mm
265x142x50
Weight
kg
1.5
Pack.
sts
1
291
Hand tools
4
Inspection set
Inspection kit
"Teng Tools" Containing three telescopic tools - an inspection mirror, magnifying glass and magnet. All with pocket
clip. Supplied in a plastic insert case with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
10946
-0105
Teng Tools
No
TTTM03
Diameter of mirror/magnifying glass
mm
55
Extendable length
mm
590
Diameter of magnet
mm
12
Case size LxWxH
mm
265x142x50
Weight
kg
0.5
Pack.
set
1
Pick up tool set with lamp
Pick up tool set with lamp
"Teng Tools" Set containing flexible and telescopic pick ups, magnifyling glass, inspection mirror, flexible claw pick up,
LED flash light and batteries. Supplied in plastic TC tray with removeable cover. Fit in Teng Tools tool boxes and tool
trolleys.
Art. no.
14437
-0103
Teng Tools
No
TTTM08
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
sts
1
Rivet gun with rivets
Rivet gun with blind rivets in a set
"Teng Tools" Set containing one rivet gun with four nose bushes as well as 80 assorted rivets (20 each of 2.4, 3.2, 4.0
and 4.8 mm). Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
6921
-0102
Teng Tools
No
TTHR81
With nose bushes
mm
2.4 3.2 4.0 4.8
Quantity rivets
80
Length of gun
mm
250
Case size LxWxH
mm
265x142x50
Weight
kg
0.95
Pack.
set
1
Blind rivet set
Assembly tool for blind rivets
"Teng Tools" Set for Blind nuts M 3, M 4, M 5 and M 6 as well as 20 Blind nuts of each size.
Art. no.
10619
-0101
Teng Tools
No
TTNR81
With nose bush for POP-nut
thread
M 3, M 4, M 5, M 6
Rivet sizes (20 of each)
thread
M 3, M 4, M 5, M 6
Case size LxWxH
mm
265x142x50
Weight
kg
1.0
Pack.
qty
1
Cold chisel/punch set
Chisel/pinch/centre punch set
"Teng Tools" Combined set containing 9 pieces - 6 parallel pin punches, 2 cold chisels and a centre punch.
Art. no.
6922
-0101
Teng Tools
No
TTPC09
Contents:Punches, tip diameter
mm
345678
Cold chisels, width
mm
19 25
Centre punch, point diameter
mm
5
Case size LxWxH
mm
265x142x50
Weight
kg
1.4
Pack.
set
1
292
Please quote the
Set of insert tools
"Teng Tools" Set of 10 pieces including swivel handle, ratchet head 3/8" and 8 ratcheting spanners - all with 9x12 mm
rectangular drive. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
11838
-0104
Teng Tools
No
TTIG10
No. of pieces
10
Swivel handle with rect. drive
mm
9x12
Ratchet head for socket tools
inch
3/8
Ratcheting spanners
mm
8 10 11 12 13 16 17 19
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
sts
1
Hand tools
Insert gear wrench set
4
Box spanner set
Box spanner set
Art. no.
11839
-0103
Teng Tools
No
TTTW07
No. of keys
6
Sizes
mm
8x9, 10x11, 12x13, 14x15, 16x17, 18x19
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
sts
1
Hose clamp set
Hose clamps in sets
"Teng Tools" Special designed jaws prevents internal hose linings from destruction. Lightweight easy to handle and
non conductive safety. 3 sizes that fit most hose sizes. Supplied in a plastic TC tray with removable cover. Fits in Teng
Tools tool boxes and tool trolleys.
Art. no.
11842
-0108
Teng Tools
No
TTHC03
Number of clamps
3
For hose diameter
inch
¼-¾, ¼-1¼, ¾-2¼
Case size LxWxH
mm
265x142x50
Weight
kg
0.49
Pack.
qty
1
Measuring kits
Measurement set
"Limit" Set of 5 pieces containing digital vernier calipers 150 mm 2928-0104, micrometer 0-25 mm 9538-0101, square
150x100 mm 2533-1158, steel rule 150 mm 8427-0107, scriber 150 mm with HM-tip 2474-0102.
Art. no.
11861
-0104
-0203
System of units
metric
Inch
Case size
mm
265x142x50
265x142x50
Pack.
sts
1
1
Drill bit set
Drill set including high speed steel drill bits
"Race" Set of 28 drills 1.0-13.0 mm. Helix pitch 28°. Point angle 118°. Centre point for improved position accuracy.
HSS. Polished. Ground. Standard drills for drilling steel and cast iron. DIN 338.
Contains:
3 each of 1.0 and 1.5 mm.
2 each of 2.0 and 2.5 mm.
1 each of 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 10, 11, 12, 13 mm.
Art. no.
13408
-0100
Drill diameters
mm
1.0-13.0
Contains no. of drills
ea.
28
Case size LxWxH
mm
265x142x50
Pack.
qty
1
293
Hand tools
4
Cordless Hand tools
Cordless impact wrench
"Teng Tools" Set containging an impact wrench with ½" square drive. Incl. fast charger and a spare 19.2 V battery.
Supplied in PS tool tray to fit in Teng Tools tool boxes and roller cabinets.
Art. no.
15172
-0109
Teng Tools
No
TTPSIW
Square drive
inch
½
Battery voltage / capacity
19.2 V / 3.0 Ah
No load speed
rpm
0-2500
Max. torque
Nm /In-lb
170 / 1504.5
Size of case
mm
Weight of case
kg
Pack
-
Tool sets
Tool set
"Teng Tools" Type Mega Rosso. Set of 187 pieces - containing sockets, socket tools, spanners and bits stored in
a sheet metal tool box with foam mat in the boxs lower compartment and with rubber feet. Removable insert tray made
of plastic. The sockets are housed using clips on two removable aluminium panels. The tools are made of chrome vanadium steel and satin finish.
Art. no.
3588
-0103
Teng Tools
No
TC187
No. of pieces
ea.
187
6 point sochets ¼", short (10)
mm
4 5 5.5 6 7 8 10 11 12 13
6 point sockets ¼", deep (6)
mm
6 7 8 10 12 13
6 point socketsr 3/8", short (14)
mm
8 9 10 11 12 13 14 15 16 17 18 19 21 22
12 point sockets ½", short (16)
mm
10 11 12 13 14 15 16 17 18 19 21 22 24 27 30 32
Socket clips ¼"
st
30
Socket clips 3/8"
st
30
Socket clips ½"
st
30
Bits ¼"-hex-drive:Bits for Torx heads (8) TX
8 10 15 20 25 27 30 40
Bits for int. hex holes (7)
mm
3 4 5 6 7 8 10
Bits for Phillips heads (2)
Nr
12
Bits for Pozidriv heads (2)
Nr
12
Bits for slotted heads (3)
mm
0.8×4.0 1.2×5.5 1.4×7
Ratchet heads (3)
tum
¼ 3/8 ½
Universal joints (3)
tum
¼ 3/8 ½
Extension bars ¼" (2)
mm
50 100
Extension bar 3/8"
mm
150
Extension bars ½" (2)
mm
75 150
Reduction adaptor
tum
3/8-¼ ½-3/8
Step up adaptor
tum
3/8-½
Bit sockets ¼, 3/8 (2)
tum
hex-¼
Combination spanners (9)
mm
8 10 11 12 13 14 15 17 19
Holder ring for combination spanners
st
1
Hex keys (3)
mm
1.5 2 2.5
Weight
kg
11
Pack
set
1
Tool box without tools
3588
-0202
Teng Tools
No
TC450
Pack
qty
1
294
Please quote the
"Teng Tools" Complete tool set of 546 pieces. Supplied in tool trolley TCW808N. The tool trolley features 8 extending drawers mounted on ball-bearing slides.
The following TT and TTX sets are included:
Drawer 1: TT1205 - art. no 0357-0108, TT1217-6 - art. no. 0357-0256, TT1435 - art. no. 0349-0109, TT3819 - art.
no. 0352-0103, TTXEXT13 - art. no. 6887-0104.
Drawer 2: TT01 - art. no. 0416-0206, TT917 - art. no. 3017-0104, TT917TX - art. no. 2598-0103, TTMD74 - art. no.
14403-0103, TTXMDT - art. no. 10213-0101
Drawer 3: TT01 - art. no. 0416-0206, TTCP121 - art. no. 11038-0102, TTHEX7 - art. no. 6893-0106, TTHR81 - art.
no. 6921-0102, TTX00 - art. no. 10945-0106.
Drawer 4: TTHT28 - art. no. 12825-0107, TTMD12D - art. no. 12865-0108, TTNF12 - art. no.12843-0105, TTSR04
- art. no. 11769-0107, TTXF05 - art. no. 12844-0104.
Drawer 5: TT1236 - art. no. 2756-0101, TT440-T - art. no. 10982-0101, TT474-7 - art. no. 0403-0102, TT6208 - art.
no. 0390-0107, TTX2032 - art. no. 6891-0108.
Drawer 6: TT804 - art. no. 0398-0109, TTALU - art. no. 0389-0100 TTPC09 - art. no. 6922-0101, TTTXH15 - art.
no. 11889-0102, TTXMDN - art. no. 11459-0102.
Drawer 7: TTPS09 - art. no. 11706-0103, TTX01 - art. no. 10945-0106.
Drawer 8: Empty.
Art. no.
Teng Tools
No. of pieces
Weight
Pack.
13173
No
ea.
kg
set
Hand tools
Tool set
4
-0103
TCMM546N
546
116.5
1
295
Hand tools
4
Tool set
"Teng Tools" Tool set for industrial use. Containing 569 parts. Supplied in roller cabinet TCW809N. The roller cabinet has 9 ball bearing drawers. The following TT and TTX -tool sets are supplied.
Drawer 1. Emty.
Drawer 2. TTXEXT13 - art. no. 6887-0104, TT1435 - art. no. 0349-0109, TT3819 - art. no. 0352-0103, TT1205 - art.
no. 0357-0108, TT1217 - art. no. 0357-0207.
Drawer 3. TTX474-9 - art. no. 11270-0109, TT440-T - art. no. 10982-0101, TTVG05 -art. no. 12248-0106, TTDCT05
- art. no. 14402-0104.
Drawer 4. TTXF05 - art. no. 12844-0104, TTTX30 -art. no. 10214-0100, TTBS35 - art. no. 13215-0103, TTTXH15 art. no. 11889-0102, TTRS15 - art. no. 14388-0102.
Drawer 5. TTX2640 - art. no. 6891-0207, TTAF32 - art. no. 6861-0104, TT1215AF - art. no. 0357-0306, TT3592 -art.
no. 5805-0303, TT3816 - art. no. 14430-0100.
Drawer 6. TTX918 - art. no. 6897-0102, TT917 - art. no. 3017-0104, TT917TX - art. no. 2598-0103, TTMD74 - art.
no. 14403-0103, TTDB28 - art. no. 15144-0104.
Drawer 7. TTX2032 - art. no. 6891-0108, TT1236 - art. no. 2756-0101, TT6508R - art. no. 10973-0101, TT6208 - art.
no. 0390-0107, TT474-7 -art. no. 0403-0102.
Drawer 8. TTX3404 - art. no. 10153-0103, TTHT28 - art. no. 12825-0107, TTHEX7 - art. no. 6893-0106, TTTX7 art. no. 6892-0107, TTTM08 - art. no. 14437-0103.
Drawer 9. TTX3414 - art. no. 10154-0102, TT9207 - art. no. 13246-0106, TT9120D - art. no. 14384-0106, TTID20 art. no. 10210-0104 and 12864-0109.
Art. no.
Teng Tools
No of parts
Weight
Pack.
296
Please quote the
15133
No
e.a.
kg
-0107
TCMMIND08
569
198
-
"Teng Tools" Type Mega Master. Tool sets placed in tool trolley TCW707, tool boxes TC703 and TC706F.
TCMM479 contains the same tools as TCMM600 except the tools on the tool panel and in the drawers 4 and 5 in the
tool trolley.
Top drawer 1 contains sets TT1435 - art. no. 0349-0109, TT3819 - art. no. 0352-0103, TT1217 - art. no. 0357-0207,
TT1205 - art. no. 0357-0109.
Top drawer 2 contains sets TT1236 - art. no. 2756-0101, TT917 - art. no. 3017-0104, TT440 - art. no. 4428-0105,
TTALU - art. no. 0389-0100.
Top drawer 3 contains standard tools such as measuring tape, universal pliers, pipe cutter, ball pein hammer, soft face
hammer, small and large hacksaw frames with blades, adjustable wrenches, utility knife, bolt cutter, spark plug plier, spark
plug thread cleanders and impact screwdriver.
Middle drawer 1 contains sets TTXEXT13 - art. no. 10621-0107, TTX918 - art. no. 6897-0102.
Middle drawer 2 contains set TTOS16 - art. no. 0396-0101, TTHEX7 - art. no. 6893-0106, TTX7 - art. no. 68920107, TTMI16 - art. no. 10445-0101.
Middle drawer 3 contains sets TT917TX - art. no. 2598-0103, TT474-7 - art. no. 0403-0102, TTHEX23 - art. no.
6885-0106, TTTX23 - art. no. 6886-0105.
Drawer 1 for the tool trolley contains sets TT804 - art. no.0398-0109, TTSN11- art. no. 6934-0107, TTX2032 art. no. 6891-0108 as well as impact driver, circuit tester, thread cleaning tool, hexagon and TX keys, flexible lamp, vernier caliper and steel rule.
Drawer 2 for the tool trolley contains set TT9116 - art. no. 6880-0101, TTHR81 - art. no. 6921-0102, TTPC09
art. no. 6922-0101, TTTD17 - art. no. 6919-0106, TTX1292 art. no. 7319-0100 and swivel handle ½".
Drawer 3 for the tool trolley contains set of 3 prybars and 4 different pairs of welding grips.
Drawer 4 for the tool trolley contains sets TTALU - art. no. 0389-0100, TT3592 - art. no. 5805-0303, TT1215AF
- art. no. 0357-0306, TTAF32 - art. no. 6861-0104, TTX2640 - art. no. 6891-0207 as well as a hex key set.
Drawer 5 for the tool trolley contains sets TTX3404 - art. no. 10153-0103, TTX3414 - art. no. 10154-0102, and
TTX34AF - art. no. 10154-0201.
Side plate for the tool trolley contains - 10 tool hooks, water pump pliers 16", bolt cutters 24", water pump pliers
18", adjustable wrench 24", magnetic tool holder and a magnetic bowl.
Art. no.
Teng Tools
Weight
Pack.
9480
No
kg
set
-0109
TCMM600
208
1
Hand tools
Tool set
4
-0208
TCMM479
161
1
297
Hand tools
4
Tool set
"Teng Tools" Tool set of 666 pieces placed in tool trolley TCW813N with 13 drawers with ball-bearing slides.
The following sets are included:
Drawer 1/13: Empty.
Drawer 2/13: TT1435 - art. no. 0349-0104, TT3819 - art. no. 0352-0103, TTXEXT13 - art. no. 6887-0104, TT1205
- art. no. 0357-0108, TT1217 - art. no. 0357-0207.
Drawer 3/13: TT917 - art. no. 3017-0104, TT917TX - art. no. 2598-0103, TTMD74 - art. no. 14403-0103, TTMI16 art. no. 10445-0101, TTX918 - art. no. 6897-0102.
Drawer 4/13: TT9116 - art. no. 6880-0101, TTXMDN - art. no. 11459-0102, TTHEX23 - art. no. 6885-0106, TTID20
- art. no. 10210-0104, TTTX23 - art. no. 6886-0105.
Drawer 5/13: TTX01 - art. no. 10945-0106, TT804 - art. no. 0398-0109, TTPC09 - art. no. 6922-0101, TTSN11 - art.
no. 6934-0107, TTTD17 - art. no. 6919-0106.
Drawer 6/13: TT7203 - art. no. 12821-0101, TTNF12 - art. no. 12843-0105, TTTM03 - art. no. 10946-0105, TTXF05
- art. no. 12844-0104, TT1211 - art. no. 12209-0103.
Drawer 7/13: TTX3404 - art. no. 10153-0103, TTPS09 - art. no. 10621-0107.
Drawer 8/13: TTHEX7 - art. no. 6893-0106, TTHT28 - art. no. 12825-0107, TTMD12D - art. no. 12865-0108, TTTX7
- art. no. 6892-0107, TTXBP3A - art. no. 11786-0106.
Drawer 9/13: TTCP04 - art. no.12247-0107, TTV440 - art. no. 11479-0102, TTV907 - art. no. 11750-0108, TT01 art. no. 0416-0206, TTX1292 - art. no. 7319-0100.
Drawer 10/13: TT9212TX - art. no. 12813-0101, TTTW07 - art. no.
-0103, TTX2032 - art. no. 6891-0108, TTTX30 - art. no. 10214-0100, TTTXH15 - art. no. 11889-0102.
Drawer 11/13: TT440-T - art. no. 10982-0101, TT474-5 - art. no. 11252-0101, TT474-7 - art. no. 0403-0102,
TTVG05 - art. no. 12248-0106, TTX474-9 - art. no. 11270-0109.
Drawer 12/13: TT1236 - art. no. 2756-0101, TT6010M - art. no. 10947-0104, TT6506 - art. no. 7300-0101, TT6508R
- art. no. 10973-0101, TTXMDT - art. no. 10213-0101.
Drawer 13/13: TTHR81 - art. no.6921-0102, TTX3414 - art. no. 10154-0102, TTHP08 - art. no. 10212-0102.
Art. no.
Teng Tools
No. of pieces
Weight
Pack.
298
Please quote the
12874
No
ea.
kg
set
-0107
TCMM666
666
267
1
"Teng Tools" Type Mega Master. Tool set with 715 pieces placed in tool trolley TCW810 as well as in tool boxes
TC804 and TC803.
Top drawer 4 contains the sets TTMI16 - art. no. 10445-0101, TTID20 - art. no. 10210-0104, TTPC09 - art. no. 69220101and TT01 - art. no. 0416-0206.
Top drawer 5 contains the sets TT917 - art. no. 3017-0104, TT440-T - art. no. 10982-0101, TT917TX - art. no. 25980103 and TTMD74 - art. no. 14403-0103.
Top drawer 6 contains set TTPSPG - art. no. 10623-0105.
Middle drawer 1 contains the sets TT804 - art. no. 0398-0109, TTNR81 - art. no. 10619-0101, TTTD17 - art. no.
6919-0106 and TTHP08 - art. no. 10212-0102.
Middle drawer 2 contains the sets TTHEX7 - art- no. 6893-0106, TT474-7 - art. no. 0403-0102, TTTX7 - art. no.
6892-0107 and TTHR81 - art. no. 6921-0102.
Middle drawer 3 contains the sets TTX6311 - art. no. 6891-0157 and TTXPB3 - art. no. 10069-0106.
Drawer 1 in the tool trolley contains the sets TTXEXT13 - art. no 6897-0102, TT1435 - art. no. 0349-0109,
TT3819 - art. no. 0352-0103, TT1217 - art. no. 0357-0207 and TT1205 - art. no. 0357-0108.
Drawer 2 in the tool trolley contains the sets TTX1292 - art. no. 7319-0100, TT9116, - art. no. 6880-0101,
TTHEX23 - art. no. 6885-0106, TTALU - art. no. 0389-0100 and TTTX23 - art. no. 6886-0105.
Drawer 3-6 in the tool trolley without tool sets.
Drawer 7 in the tool trolley contains the sets TTX2032 - art. no. 6891-0108, TT1236 - art. no. 2756-0101, TTSN11
- art. no. 6934-0107, TTOS16 - art. no. 0396-0101 and TTALU - art. no. 0389-0100.
Drawer 8 in the tool trolley contains the sets TTX918 - art. no. 6897-0102 and TTPS09 - art. no. 10621-0107.
Drawer 9 in the tool trolley contains the sets TTX2640 - art. no. 6891-0207, TT3592 - art. no. 5805-0303, TTAF32
- art. no. 6861-0104, TT1215AF- art. no. 0357-0306 and TTTX30 - art. no. 10214-0100.
Drawer 10 in the tool trolley without tool set.
Art. no.
Teng Tools
Weight complete
Pack.
10624
No
kg
set
Hand tools
Tool set
4
-0203
TCMM715N
180
1
299
Hand tools
4
Tool set with 831 pieces
"Teng Tools" Tool set containing 831 pieces for the industrial sector supplied in tool trolley TCW810, and tool boxes
TC806NF and TC803N, all equipped with bearing mounted extending drawers.
Contents per drawer:
Top drawer 4/6: TTTX7 - art. no. 6892-0107, TTHEX7 - art. no. 6893-0106, TTHEX7AF - art. no. 6893-0205,
TTHR81 - art. no. 10619-0101.
Top drawer 5/6: TT1236 - art. no. 2756-0101, TTTM03 - art. no. 10946-0105, TT6508R - art. no. 10973-0101,
TTTX30 - art. no. 10214-0100.
Top drawer 6/6: TTPS09 - art. no. 10621-0107.
Middle drawer 1/3: TTPC09 - art. no. 6922-0101, TTID20 - art. no. 10210-0104, TTSR04 - art. no. 11769-0107,
TT00 - art. no. 0416-0107.
Middle drawer 2/3: TT7203 - art. no. 12821-0101, TT6506 - art. no. 7300-0101, TT6010M - art. no. 10947-0104,
TT6208 - art. no. 0390-0107.
Middle drawer 3/3: TTX6311 - art. no. 6891-0157, TTXPB3 - art. no. 11786-0106.
Drawer 1/10 in tool trolley: TTXEXT13 - art. no. 6887-0104, TT1435 - art. no. 0349-0109, TT3819 - art. no. 03520103, TT1205 - art. no. 0357-0108, TT1217 - art. no. 0357-0207.
Drawer 2/10 in tool trolley: TTXMDT - art. no. 10213-0101, TT1211 - art. no. 12209-0103, TTTX23 - art. no.
6886-0105, TTHEX23 - art. no. 6885-0106, TTHT28 - art. no. 12825-0107.
Drawer 3/10 in tool trolley: TTX918 - art. no. 6897-0102, TT917 - art. no. 3017-0104, TT917TX - art. no. 25980103, TTMD74 - art. no. 14403-0103, TTMD12D - art. no. 12865-0108.
Drawer 4/10 in tool trolley: TTX474-9 - art. no. 11270-0109, TT440-T - art. no. 10982-0101, TT474-7 - art. no.
0403-0102, TT474-5 - art. no. 11252-0101, TTVG05 - art. no. 12248-0106.
Drawer 5/10 in tool trolley: TTX1292 - art. no. 7319-0100, TTCP04 - art. no. 12247-0107, TTV440 - art. no.
11749-0102, TTV907 - art. no. 11750-0108, TTBS35 - art. no. 13215-0103.
Drawer 6/10 in tool trolley: TTX01 - art. no. 10945-0106, TTTD17 - art. no. 6919-0106, TTSN11 - art. no. 69340107, TTNF12 - art. no. 12843-0105, TT01 - art. no. 0416-0206.
Drawer 7/10 in tool trolley: TTX9415 - art. no. 12208-0104, TT9024 - art. no. 13247-0105, TT9207 - art. no.
13246-0106, TT9212TX - art. no. 12813-0101, TT9116 - art. no. 6880-0101.
Drawer 8/10 in tool trolley: TTXMDN - art. no. 11459-0102, TT1215AF - art. no. 0357-0306, TT3592 - art. no.
5805-0303, TTAF32 - art. no. 6861-0104, TT6508RAF - art. no. 10973-0200.
Drawer 9/10 in tool trolley: TTX3404 - art. no. 10153-0103, TTX3414 - art. no. 10154-0102, TTX34AF - art. no.
10154-0201.
Drawer 10/10 in tool trolley: TTX2032 - art. no. 6891-0108.
Also includes ABS-TOP - art. no. 11254-0109, TCBP - art. no. 12222-0106, 580C - art. no. 11788-0104 and 580D - art.
no. 11788-0203, TCF01 - 11754-0101, TC-COVER1 - art. no. 14401-0204.
Art. no.
Teng Tools
No. of pieces
Weight
Pack.
300
Please quote the
14436
No
ea.
kg
sts
-0104
TCMMIND1
831
252
1
With ¼" square-drive
Socket set
"Teng Tools" Mini.Socket and bits-set. Contains nine ¼"-sockets, ten bits, extension bar 50 mm, bit holder and a
swivel ratchet handle. Supplied in plastic case with snap catch.A display supplied with the order of 5 mini socket sets.
Art. no.
12815
-0109
Teng Tools
No
M1422
No. of pieces
ea.
22
Sockets dim.
mm
4 5 5.5 6 7 8 10 12 13
mm
0.6 x 4 0.8 x 5.5 1.2 x 6.5
No
12
No
12
Bits for TX-heads
TX
10 15 20
Insert size LxWxH
mm
160x80x30
Weight
kg
0.30
Pack.
set
5
Hand tools
Socket sets
4
"Teng Tools" Mini set containing one bit ratchet handle, 9 x ¼"-sockets, extension bar 50 mm, adaptor
ext.¼"squarex¼"-hex ext., 10 bits as well as an adjustable wrench.A display supplied with the order of 5 mini socket sets.
Art. no.
12252
-0109
Teng Tools
No
M1423
No. of pieces
ea.
23
Sockets dim.
mm
4 5 5.5 6 7 8 10 12 13
mm
0.8x4 1.0x5.5 1.2x6.5
No
12
No
12
Bits for TX-heads
TX
10 15 20
Case size
mm
160x80x30
Weight
kg
0.3
Pack.
sts
5
Spare drawer
12252
-0208
Teng Tools
No
BMB-1423
Pack.
qty
1
Socket set. With ¼" square-drive.
"Teng Tools" Type Mecca Rosso Mini. Registered design. Contains sockets with 6-point openings, fibre reinforced ratchet handle, extension bars 75 mm, 8 bits and hanging hook. Supplied in plastic box.
Art. no.
2746
-0104
Teng Tools
No
MR1423
No. of pieces
ea.
23
Sockets dim.
mm
4 5 5.5 6 7 8 10 11 12 13
mm
0.8×4 1.2×5.5
No
12
Bits for TX-heads
TX
15 20
Bits for hex holes
mm
56
Case size
mm
160x100x35
Weight
kg
0.5
Pack.
set
5
"Teng Tools" Mini set of 24 parts. Containing 11 hexagon sockets, 10 bits, mini-ratchet handle, 100 mm long extension bar and bit holder. Supplied in plastic case. A display is supplied with the order of 5 socket sets.
Art. no.
13210
-0108
Teng Tools
No
M1424
No. of pieces
ea.
24
Hexagon sockets
mm
4 5 5.5 6 7 8 9 10 11 12 13
mm
4 5.5 6.5
No
12
No
12
Bits for TX-heads
TX
10 15 20
Weight
kg
0.5
Pack.
sts
5
301
Hand tools
4
"Teng Tools" Series Mecca Rosso. Contains sockets with 6-point openings, fibre reinforced ratchet handle, extension bar 75 mm, 8 bits and hanging hook.
Supplied in plastic box.
Art. no.
10168
-0106
Teng Tools
No
MR1429
No. of pieces
ea.
29
Sockets dim.
mm
4 5 5.5 6 7 8 10 11 12 13
mm
5.5 6 7 8 9 10 11 12 13
mm
0.8×4 1.2×5.5
No
12
Bits for TX-heads
TX 8 TX10
Case dim. LxWxH
mm
250x130x45
Weight
kg
0.9
Pack.
set
1
Spare drawer
10168
-0205
Teng Tools
No
BMB-1429
Pack.
qty
1
"Teng Tools" Series Mecca Rosso. Registered design. Industrial quality. Contains 11 short and 4 long sockets with
6-point openings, fibre reinforced ratchet handle, extension bar 50 mm, 11 bits, bit socket, Bi-flex spanner and universal
joint. Supplied in plastic box with a registered design. Tool mat in the cases lid. The underside of the case is fitted with
rubber feet to prevent it from sliding.
Art. no.
0469
-0103
Teng Tools
No
MR1431BF
No. of pieces
ea.
31
No. of sockets
ea.
15
Sockets dim. (short)
mm
4 5 5.5 6 7 8 9 10 11 12 13
Sockets dim. (deep)
mm
8 10 12 15
Bits for TX-heads
TX8 10 15 20 25
Bits for hex holes
mm
345678
Case size
mm
250x130x45
Weight
kg
1.0
Pack.
qty
1
Spare drawer
0469
-0202
Teng Tools
No
BMB-1431BF
Pack.
qty
1
"Teng Tools" Series Mecca Rosso. Set of 35 pieces containing 6-point sockets in inch sizes - short as well as long.
In addition, includes 11 screwdriver bits, fibre reinforced reversible ratchet, universal joint, extension bars 50 and 100
mm, adaptor drive 3/8" - 1/4 ", hex keys 1.5, 2.0 and 2.5 mm as well as bit socket.
Supplied in plastic case with click lock and folding handle. The underside of the case is fitted with rubber feet to prevent
it from sliding.
Art. no.
6857
-0100
Teng Tools
No
MR1435AF
Measurement system
Inch
No. of pieces
ea.
35
Sockets short
inch
3/16 7/32 ¼ 9/32 5/16 11/32 3/8 7/16 ½
Sockets long
inch
3/16 ¼ 5/16 3/8 7/16 ½
mm
0.8x4.0 1.2x5.5
No
12
No
12
Bits for hex holes
mm
56
Bits for TX-heads
TX
10 15 20
Weight
kg
1.0
Pack.
set
1
Spare drawer
6857
-0209
Teng Tools
No
BMB-1435AF
Pack.
qty
1
302
Please quote the
"Teng Tools" Series Mecca Rosso. Contains sockets with 6-point openings. In addition, includes bit socket ¼"hex, adapter drive 3/8"-¼", extension bars 50 and 100 mm, universal joint, fibre reinforced ratchet handle with lever for
reversible action and three hexagon keys and 11 bits.
Supplied in plastic box with registered design. Tool mat in the cases lid. The underside of the case is fitted with rubber
feet to prevent it from sliding.
Art. no.
5895
-0106
Teng Tools
No
MR1436
No. of pieces
ea.
36
No. of sockets
ea.
16
Socket dim. short
mm
4 5 5.5 6 7 8 10 11 12 13
Socket dim. deep
mm
6 7 8 10 12 13
Bits for hex holes
mm
56
Bits for TX-heads
TX
10 15 20
mm
0.8×4 1.2×5.5
No
12
No
12
Hex keys
mm
1.5 2 2.5
Weight
kg
0.9
Pack.
set
1
Spare drawer
5895
-0205
Teng Tools
No
BMB-1436
Pack.
qty
1
Hand tools
4
With 3/8" square-drive
"Teng Tools" Set containing 13 6 point sockets, ratchet handle, universal joint, extension bar 75 mm, screwdriver
handle 250 mm long with 3/8" square-drive at both ends, adaptor drive ½"-3/8" and ¼" bit socket.
Art. no
0352
-0103
Teng Tools
No
TT3819
Measurement system
Millimetre
No. of pieces
ea.
19
Sockets (13)
mm
8 9 10 11 12 13 14 15 16 17 18 19 22
Case size LxWxH
mm
265x142x50
Weight
kg
1.0
Pack
set
1
"Teng Tools" Type Mini Rosso. Registered design. Industrial quality. Contains 9 sockets with 6-point openings,
fibre reinforced ratchet handle, extension bar 75 mm, bit socket ¼"-hex, 11 bits and hanging hook.
Supplied in plastic box.
Art. no.
2747
-0103
Teng Tools
No
MR3824
No. of pieces
ea.
24
Sockets dim.
mm
8 10 11 12 13 14 15 17 19
mm
0.8×4 1.2×5.5
No
12
No
12
Bits for hex holes
mm
56
Bits for TX-heads
TX
10 15 20
Hanging hook
ea.
1
Weight
kg
0.8
Pack.
set
5
Spare drawer
2747
-0202
Teng Tools
No
BMB-3824
Pack.
qty
1
"Teng Tools" Series Mecca Rosso. 34 piece set. Containing metric rectangular adnd deep 6-point sockets, fibre
reinforced ratchet, bent type flex handle, spark plug sockets 16 and 21 mm, 3" and 6" extension bars, universal joint and
and adaptor ½"-3/8". Supplied in red plastic case with click lock and folding handle. Tool mat in the cases lid. The underside of the case is fitted with rubber feet.
Art. no.
15170
-0101
Teng Tools
No
MR3834
No of parts
ea.
34
Regular sockets
mm
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Deep sockets
mm
8 9 10 11 12 13 14 15 17 19 22
Case dim. LxWxH
mm
Weight
kg
Pack.
303
Hand tools
4
"Teng Tools" Series Mecca Rosso. Socket/Combination spanner set. Contains 14 sockets with 6-point
openings. In addition, includes extension bar 150 mm, universal joint, bit socket ¼"-hex, adaptor drive ½"-3/8", fibre
reinforced ratchet handle with lever for reversible action, 9 combination spanners and 11 screwdriver bits. Supplied in
plastic case with click lock, folding handle. The underside of the case is fitted with rubber feet to prevent it from sliding.
Art. no.
1391
-0104
Teng Tools
No
MR3840
No. of pieces
ea.
39
Sockets dim.
mm
8 9 10 11 12 13 14 15 16 17 18 19 21 22
mm
0.8×4 1.2×5.5
No
12
No
12
Bits for hex holes
mm
56
Bits for TX heads
TX
10 15 20
mm
8 10 11 12 13 14 15 17 19
Weight
kg
2.3
Pack.
set
1
Spare drawer
1391
-0203
Teng Tools
No
BMB-3840
Pack.
qty
1
"Teng Tools" Series Mecca Rosso. Socket/tool set containing fibre reinforced ratchet handle, universal joint, extension bars 75 and 150 mm, bit socket, adaptor ½"- 3/8", bit screwdriver with magnet, 14, 6-point sockets, 10 combination spanners, 6 screwdrivers, 4 pliers as well as 26 bits. Supplied in plastic box. Tool mat in the cases lid. The
underside of the case is fitted with rubber feet to prevent it from sliding.
Art. no.
10174
-0108
Teng Tools
No
MR3867
No. of pieces
ea.
67
Sockets dim. (hexagon)
mm
8 9 10 11 12 13 14 15 16 17 18 19 20 22
mm
8 10 11 12 13 14 15 16 17 18 19
Screwdrivers for slotted heads
mm
0.6×3.2 1.0×5 1.4×6.0
Screwdrivers for Phillips-heads
No
012
Side cutters, length
mm
150
Combination pliers, length
mm
175
Flat nose pliers, length
mm
200
Water pump pliers, length
mm
250
mm
0.8x4 1.2x5
No
0123
No
123
Bits for TX-heads
TX8 10 15 20 25 27 30 40 45 50
mm
34568
Case size LxWxH
mm
550x280x60
Weight
kg
4.7
Pack.
set
1
Spare drawer
10174
-0207
Teng Tools
No
BMB-3867
Pack.
qty
1
With ¼" and 3/8" square drive
Socket set. With ¼" and 3/8" square drive
"Teng Tools" Series Mecca Rosso.Contains 24 sockets with 6-point openings. In addition, includes bit socket ¼"hex, extension bars 50 and 150 mm (¼") and 75 and 125 mm (½"), adaptor drive ½"-3/8" and 3/8"-¼", universal joint
3/8", ratchet handle hex¼" and 3/8", square drive ¼"-hex¼" and 31 bits. Supplied in plastic case with click lock and folding handle. Tool mat in the cases lid. The underside of the case is fitted with rubber feet to prevent it from sliding.
Art. no.
5908
-0101
Teng Tools
No
MR3869
No. of pieces
ea.
69
Socket dimensions (¼")
mm
4 5 5.5 6 7 8 10 11 12 13
Socket dimensions (3/8")
mm
8 9 10 11 12 13 14 15 16 17 18 19 20 22
mm
0.8×4.0 1.2×5.5 1.4×7.0
No
0123
No
123
Bits for TX heads
TX
8 10 15 20 25 27 30 40
Bits for hex holes
mm
3 4 5 6 8 10
Bits for hex holes
inch
1/8 9/64 5/32 3/16 7/32 ¼ 3/8
Hex keys
mm
1.5 2 2.5
Weight
kg
2.2
Pack.
set
1
Spare drawer
5908
-0200
Teng Tools
No
BMB-3869
Pack.
qty
1
304
Please quote the
Socket set. With ¼" and ½" square drive
"Teng Tools" Series Mecca Rosso. Registered design. Industrial quality. Contains 10 ¼" sockets with 6-point
openings and 16 ½" sockets with 12-point openings, bit socket ¼"-hex, adaptor drive 3/8"-½", universal joint ½", extension bars 100 mm (¼"), 125 and 250 mm (½"), swivel socket ½", bits/socket-swivel wrench, fibre reinforced ratchet
handle ¼" and ½" with lever for reversible action, three hexagon keys and 33 bits.
Supplied in plastic case with click lock and folding handle. Tool mat in the cases lid. The underside of the case is fitted
with rubber feet to prevent it from sliding.
Art. no.
5917
-0100
Teng Tools
No
MR1272
No. of pieces
ea.
72
Sockets dim. ¼" hex. (10)
mm
4 5 5.5 6 7 8 10 11 12 13
Sockets dim. ½" bihex. (16)
mm
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 27
Bits for TX-heads
TX
5 10 20 25 27 30 40
Bits for XZN screws
M
56
mm
0.8x4 1.2x5.5 1.4x7
No
012
No
123
Bits for hex holes
mm
3 4 5 6 8 10
Bits for hex holes
inch
1/8 9/64 5/32 3/16 7/32 ¼ 3/8
Hex keys
mm
1.5 2 2.5
Weight
kg
4.1
Pack.
set
1
Spare drawer
5917
-0308
Teng Tools
No
BMB-1272
Pack.
qty
1
Hand tools
With ¼" and ½" square drive
4
With ¼", 3/8" and ½" square-drive
Socket set. With ¼", 3/8" and ½" square-drive
"Teng Tools" Type Mecca Rosso Jumbo. Registered design. Industrial quality. Contains 101 pieces, among others, ¼", 3/8" and ½" sockets with 6-point openings, ¼"-hex-bits and different socket tools, combination spanners and
swivel head wrenches. Supplied in plastic case with click lock and folding handle. The underside of the case is fitted with
Art. no.
2745
-0105
Teng Tools
No
MR101
No. of pieces
ea.
101
Sockets ¼", short (10)
mm
4 5 5.5 6 7 8 10 11 12 13
Sockets ¼", deep (6)
mm
6 7 8 10 12 13
Sockets 3/8" (14)
mm
8 9 10 11 12 13 14 15 16 17 18 19 21 22
Sockets ½" (5)
mm
19 24 27 30 32
Spark plug socket
3/8-16 mm, ½-21 mm
Ratchet handles (2)
¼, 3/8
Extension bars 50 & 75 mm
¼
3/8
½
Universal joints
¼, 3/8, ½
Bit socket ¼"-hex
¼, 3/8
Bit screwdriver
¼
Adaptor drives
3/8-½
Adaptor drives
3/8-¼, ½-3/8
Combination spanners (10)
mm
8 10 11 12 13 14 15 16 17 18
Holder ring for combination spanners
ea.
1
Swivel wrench
mm
10×11 12×13 14×15
Bits ¼"-hex-driveBits for TX-heads (8)
TX
8 10 15 20 25 27 30 40
Bits for twelve point heads (2)
M
56
Bits for slotted heads (3)
mm
0.8×4 1.2×5.5 1.2×7
Bits for Phillips-heads (4)
No
0123
Bits for Pozidriv-heads (3)
No
123
Bits for hex holes (6)
mm
3 4 5 6 8 10
Bits for hex holes (7)
inch
1/8 9/64 6/32 3/16 7/32 ¼ 3/8
Weight
kg
6.5
Pack.
set
3
Spare drawer
2745
-0204
Teng Tools
No
BMB-101
Pack.
qty
1
305
Hand tools
4
"Teng Tools" Series Mecca Rosso. Set containing 111 parts - with ¼", 3/8" and ½" regular socskets, 3/8" ldeep
sockets, socket accessories with ¼", 3/8" and ½" square-drive, 1/4" and 5/16" screwdriver bits. Supplied in red plastic
case with click lock and folding handle. Tool mat in the cases lid. The underside of the case is fitted with rubber feet.
Art. no.
15168
-0105
Teng Tools
No
MR111
No of parts
ea.
111
Hexagon sockets ¼" square-drive
mm
4 5 6 7 8 10 12
Hexagon sockets ¼" square-drive
inch
3/16 7/32 ¼ 9/32 3/8 7/16
Hexagon sockets 3/8" square-drive
mm
8 9 10 12 13 14 15 16 17
Hexagon sockets 3/8" square-drive
inch
3/8 7/16 ½ 9/16 11/16 ¾ 13/16 7/8
Hexagon sockets, deep 3/8" square-drive
mm
8 9 10 12 13 14 15 16 17
Hexagon sockets, deep 3/8" square-drive
inch
3/8 7/16 ½ 9/16 11/16 ¾ 13/16 7/8
Hexagon sockets ½" square-drive
mm
17 24 27 32
Hexagon sockets ½" square-drive
inch
11/16 ¾ 13/16 7/8 1 13/16
Spark plut sockets 3/8 square-drive
mm
16 21
Bit holder for ¼" hex bits
¼" och 3/8"
Bit holder for 5/16" hex bits
½"
Flexible extension 150 mm
¼"
Extension bars 50 and 100 mm
¼"
3/8"
½"
Spinner handles
1/4" and 3/8"
Universal joints
¼" and 3/8"
Step up adaptors
¼"-3/8" och 3/8"-½"
Reducing adaptors
½"-3/8"
T-handle
¼"
Ratchets
¼" 3/8" ½"
Bits ¼" for int. hex. holes
mm
3 4 5 6 7 10
Bits ¼" for int. hex holes
inch
1/8 9/64 5/32 3/16 ¼ 5/16
Bits ¼" for TX heads
TX
10 15 20 25 30 40
Bits ¼" for PH heads
No
123
Bits ¼" for PZ heads
No
10 15 20 25 30 40
Bits 5/16" for TX heads
TX
45 50
Weight
kg
Pack.
-
With ½" square-drive
"Teng Tools" Ratchet handle set containing ratchet handle reversible with lever and with locking button as well
as quick release and switching sockets. Also includes universal joint and two extension bars.
Socket sets containing 17 resp. 15 12 point or 6 point sockets.
The sets are supplied in a plastic TC tray with removable cover. The cases fit in Teng Tools tool boxes and tool trolleys.
Ratchet handle set
0357
-0108
Teng Tools
No
TT1205
Extension bars, length
mm
125, 250
Weight
kg
1.1
Pack.
set
1
Socket sets
Teng Tools
Measurement system
No. of pieces
Socket grip
Sockets dim.
0357
No
Case dim.
Weight
Pack.
mm
kg
set
mm/inch
-0207
TT1217
Metric
17
12 point
10 11 12 13 14 15 16 17 18
19 20 21 22 24 27 30 32
265x142x50
1.65
1
-0256
TT1217-6
Metric
17
6 point
10 11 12 13 14 15 16 17 18
19 20 21 22 24 27 30 32
265x142x50
1.65
1
-0306
TT1215AF
AF
15
12 point
3/8 7/16 ½ 9/16 5/8 11/16 13/16
7/8 15/16 11/16 11/8 13/16 1¼
265x142x50
1.7
1
"Teng Tools" Set containing 12 sockets with 12-point or 6-point openings. Also includes ratchet handle with reversing
thumb lever, extension bars 62 and 150 mm, adaptor drive 3/8-½" as well as a universal joint.
Art. no.
3918
-0104
-0203
Teng Tools
No
TT1218
TT1218-6
Measurement system
Millimetre
Millimetre
Socket type
12-point
6-point
No. of pieces
ea.
17
17
Sockets dim. (12)
mm
10 11 12 13 14 15 16 17 18 19 22 24 10 11 12 13 14 15 16 17 18 19 22 24
Case size LxWxH
mm
265x142x50
265x142x50
Weight
kg
2.15
2.15
Pack.
set
1
1
306
Please quote the
"Teng Tools" Series Mecca Rosso. Contains sockets with 12-point resp. 6-point openings. In addition, includes
two extension bars (length 63 and 150 mm), universal joint, adaptor drive ½"-3/8" and fibre reinforced ratchet handle
with lever for reversible action. Supplied in plastic box. Tool mat in the cases lid. The underside of the case is fitted with
Art. no.
0539
-0109
-0182
-0208
Teng Tools
No
MR1221
MR1221-6
MR1220AF
Measurement system
Millimetre
Millimetre
American AF
Size
12-point
6-point
12-point
No. of pieces
ea.
21
20
Sockets dim.
mm/inch
10 11 12 13 14 15 16 17 18 19
3/8 7/16 ½ 9/16 5/8 11/16 ¾
13/16 7/8 15/16
21 22 24 27 30 32
1 11/16 11/8 13/16 1¼
Weight
kg
2.95
3.1
Pack.
1
1
1
Spare drawer
0539
-0406
-0406
-0307
Teng Tools
No
BMB-1221
BMB-1221
BMB-1220AF
Pack.
qty
1
1
1
Hand tools
4
Socket set with ½" square-drive
"Teng Tools" Series Mecca Rosso. Set containing 16 short hexagon sockets, 8 long hexagon sockets, adaptor
drive 3/8"- ½", spark plug socket 16 and 21 mm as well as hex keys 1.5, 2.0 and 2.5 mm. Supplied in plastic box. Tool
mat in the cases lid. The underside of the case is fitted with rubber feet to prevent it from sliding.
Art. no.
12251
-0100
Teng Tools
No
MR1234
Short sockets dim.
mm
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 27
Long sockets dim.
mm
13 14 15 16 17 18 19 24
Case dim. LxWxH
mm
450x230x55
Weight
kg
5.48
Pack.
sts
4
Spare drawer
12251
-0209
Teng Tools
No
BMB-1234
Pack.
qty
1
"Teng Tools" Series Mecca Rosso. Registered design. Industrial quality. Contains 33 sockets with 12-point openings and fibre reinforced ratchet handle, universal joint, 3 extension bars - length 75, 125 and 250 mm, and one adaptor
drive 3/8"-½". Supplied in plastic case with click lock and folding handle. The underside of the case is fitted with rubber
feet to prevent it from sliding.
Art. no.
0252
-0104
Teng Tools
No
MR1239
No. of pieces
ea.
39
Measurement system
Millimetre + Inch
Size
12-point
Sockets - millimetre (18) mm
10 11 12 13 14 1516 17 18 19 20 21 22 23 24 27 30 32
Sockets - inch (15)
inch
3/8 7/16 ½ 9/16 5/8 11/16 ¾ 13/16 7/8 15/161 11/16 11/8 13/16 1¼
Weight
kg
5.4
Pack.
set
1
Spare drawer
0252
-0203
Teng Tools
No
BMB-1239
Pack.
qty
1
With ¾" square-drive
Socket sets. With ¾" square-drive
"Teng Tools" Series Mecca Rosso. Contains 23 pieces. Consisting of ratchet handle, extension bars - length 100,
200 and 400 mm, T-handle, 8 6 point sockets in millimetre sizes, 9 12 point sockets in inch sizes.
Supplied in sheet metal case.
Art. no.
11663
-0104
Teng Tools
No
MR 3423
No. of pieces
ea.
23
Sockets dim. (8)
mm
19 21 24 27 32 34 36 50
Sockets dim. (9)
inch
7/8 1 11/8 13/16 15/16 1½ 15/8 113/16 2
Weight
kg
15.0
Pack.
set
1
307
Sockets - Socket Tools
Socket sets. With ¾" square-drive
Hand tools
4
"Teng Tools" Series Mecca Rosso. Contains 23 pieces. Consisting of ratchet handle, extension bars - length 100,
200 and 400 mm with safety locking system fixing the socket to the bar, T-handle, 8 6 point sockets in millimetre sizes,
9 12 point sockets in inch sizes. Supplied inplastic case with click lock and folding handle. TYool mat in the lid. The underside of the case is fitted with rubber feet to prevent it from sliding.
Art. no.
15219
-0104
Teng Tools
No
MR3423S
Number of parts
ea.
23
Socket sizes (8)
mm
19 21 24 27 32 34 36 50
Socsket sizes (9)
inch
7/8 1 11/8 13/16 15/16 1½ 15/8 113/16 2
Size of case LxWxH
mm
584x310x110
Weight
kg
12
Pack.
-
With 1" square-drive
Socket set. With 1" square-drive.
"Teng Tools" Contains sockets of chrome vanadium steel with 12 point openings. In addition, includes T-handle 560
mm with drive, two extension bars 200 and 400 mm as well as ratchet handle 550 mm. Satin finish.
Supplied in metal case.
Art. no
7353
-0107
Teng Tools
No
M1115MM
No. of pieces
ea.
15
Sockets dim. (10)
mm
36 41 46 50 55 60 65 70 75 80
Weight
kg
28
Pack
set
1
Sockets
Socket. With ¼" square-drive.
"Teng Tools" With 6 point openings. Chrome vanadium steel. Satin finish. Length 21.2 mm. According to standard
DIN 3124/ISO 2725.
Millimetre series
AF series
Teng Tools M1405-C
Teng Tools M1401-C
Art. no
Size
Pack
Art. no
Size
Size
Pack
2567
mm
qty
6980
AF
mm
qty
-0100
4
10
-0159
4.5
10
-0209
5
10
-0100
3/16
4.8
10
-0258
5.5
10
-0209
7/32
5.6
10
-0308
6
10
-0308
¼
6.4
10
-0407
7
10
-0407
9/32
7.1
10
-0506
8
10
-0506
5/16
7.9
10
-0605
9
10
-0605
11/32
8.7
10
-0704
10
10
-0704
3/8
9.5
10
-0803
11
10
-0803
7/16
11.1
10
-0902
12
10
-1009
13
10
-0902
½
12.7
10
Socket. With ¼" square-drive.
"Teng Tools" Deep sockets with 6 point openings. Chrome vanadium steel. Satin finish. Length 49.5 mm. According
to standard DIN 3124/ISO 2725.
Millimetre series
AF series
Teng Tools M1406-C
Teng Tools M1402-C
Art. no
Size
Pack
Art no.
Size
Size
Pack
3562
mm
qty
6989
AF
mm
qty
-0038
4
10
-0061
5
10
-0101
3/16
4.8
10
-0095
5.5
10
-0150
7/32
5.6
10
-0103
6
10
-0200
¼
6.4
10
-0202
7
10
-0259
9/32
7.1
10
-0301
8
10
-0309
5/16
7.9
10
-0350
9
10
-0358
11/32
8.7
10
-0400
10
10
-0408
3/8
9.5
10
-0459
11
10
-0507
7/16
11.1
10
-0509
12
10
-0606
½
12.7
10
-0608
13
10
308
Please quote the
"Teng Tools" For slotted heads. For hand tightening. Satin finish.
Art. no.
6828
-0106
Teng Tools
No
M141404-C
Screwdr. thickn.xwidth
mm
0.8x4
Length
mm
25
Pack.
qty
10
-0205
M141455-C
1.2x5.5
25
10
-0304
M141407-C
1.4x7
25
10
Screwdriver socket with ¼" square-drive
"Teng Tools" For screws with Phillips cross heads. For hand tightening. Satin finish.
Art. no.
6826
-0058
-0108
-0207
Teng Tools
No
M141300-C
M141301-C
M141302-C
For Phillips cross heads
No
0
1
2
Length
mm
25
25
25
Pack.
qty
10
10
10
Hand tools
4
-0306
M141303-C
3
25
10
"Teng Tools" For screws with Pozidriv and Supadriv cross heads. For hand tightening. Satin finish.
Art. no.
6835
-0107
-0206
-0305
Teng Tools
No
M141601-C
M141602-C
M141603-C
For Pozidriv cross heads
No
1
2
3
Length
mm
25
25
25
Pack.
qty
10
10
10
TX-socket. With ¼" square-drive
"Teng Tools" Chrome vanadium steel. For external TX heads. The head gives minimal loss of torque transmission.
Satin finish.
Art. no.
10185
-0105
-0204
-0303
-0402
-0501
Teng Tools
M140704
05
06
07
08
Max. head width
mm
3.86
4.75
5.74
6.22
7.52
For screw
M
3
4
5
6
6-7
Length
mm
23.1
24.8
24.8
24.8
24.8
Pack.
qty
10
10
10
10
10
TX-socket. With ¼" square-drive
"Teng Tools" For internal TX heads. The head gives minimal loss of torque transmission. Satin finish.
Art. no.
11206 -0108
-0207
-0306
-0405
-0504
-0603
Teng Tools M1412T-C
TX 10
TX 15
TX 20
TX 25
TX 27
TX 30
Max. size
mm
2.74
3.27
3.86
4.43
4.99
5.52
For screw
M
3-3.5
3.5-4
4-5
4.5-5
4.5-6
6-7
Length
mm
32
32
32
32
32
32
Pack.
qty
10
10
10
10
10
10
-0702
TX 40
6.65
7-8
32
10
Bit socket. With ¼" square-drive.
"Teng Tools" With hexagon for standard ¼" screwdriver bits. Chrome vanadium steel. Satin finish.
Art. no.
3563
-0102
Teng Tools
No
M140060-C
For bits hex
inch
¼
Length
mm
25
Pack.
qty
10
With ¼" and 3/8" square-drive
Socket and bits set. With ¼" and 3/8" square-drives
"Teng Tools" Set of 35 pieces. Contains 33 ¼" and 3/8" bit sockets, one adaptor drive (enlarger) ¼"-3/8" and one
adaptor drive (reducer) 3/8" - ¼". Supplied in plastic case with removable lid. Fits in Teng Tools tool boxes and tool
trolleys.
Art. no
13215
-0103
Teng Tools
No
TTBS35
No. of pieces
ea.
35
Bit sockets 1/4" for slotted heads
mm
0123
Bit sockets 1/4" for Phillips cross heads
No
4 4.5 7
Bit sockets 1/4" for Pozidriv cross heads
No
123
Bit sockets 1/4" for TX-heads
No
10 15 20 25 27 30 40
mm
3 4 5 5.5 6 7 8 10 12
inch
1/8 5/32 3/16 7/32 ¼ 5/16 3/8
Case dim. LxWxH
mm
265x142x50
Weight
kg
1.25
Pack
sts
1
309
Hand tools
4
"Teng Tools" 30 piece bit socket set. Consisting of adaptor drive 3/8" - ¼ ", extension bar 3/8 "length 75 mm and 28
socket bits for internal and external TX heads.
Art. no.
10214
-0100
Teng Tools
No
TTTX30
Adaptor drive
inch
3/8-¼
mm
75
TX-bits3/8"
TX10 15 20 25 27 30 40 45 50
TX-bits3/8"
TPX10 15 20 25 27 30 40 45 50
TX-bits3/8"
E10 12 14 16 18
TX-bits ¼"
E45678
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
sts
1
Socket. With 3/8" square-drive.
"Teng Tools" With 6 point opening. Chrome vanadium steel. Satin finish. According to standard DIN 3124/ISO 2725.
Metric series
AF series
Teng Tools M3805-C
Teng Tools M3801-C
Art. no.
Socket
Pack.
Art. no.
Size
Size
Pack.
2621
mm
qty
6995
AF
mm
qty
-0054
7
10
-0104
8
10
-0103
5/16
7.9
10
-0203
9
10
-0302
10
10
-0202
3/8
9.5
10
-0401
11
10
-0301
7/16
11.1
10
-0500
12
10
-0609
13
10
-0400
½
12.7
10
-0708
14
10
-0509
9/16
14.3
10
-0807
15
10
-0906
16
10
-0608
5/8
14.3
10
-1003
17
10
-0707
11/16
14.3
10
-1102
18
10
-1201
19
10
-0806
¾
19.1
10
-1300
20
10
-1409
21
10
-0905
13/16
20.6
10
-1508
22
10
-1002
7/8
22.2
10
Socket with through holes - ext. hexagonal drive 19 mm
"Teng Tools" Sockets with through hole. External hexagonal drive 19 mm for applications together with ratchet handle 14413-0101. The sockets are especially designed for tightening nuts on stud bolts. Matt chromium plated.
Art. no.
14411
-0103
-0202
-0301
-0400
-0509
Teng Tools
No
M800510-C
M800511-C
M800512-C
M800513-C
M800514-C
Size
mm
10
11
12
13
14
Pack.
qty
1
1
1
1
1
Art. no.
14411
-0608
-0707
-0806
-0905
-1002
Teng Tools
No
M800515-C
M800516-C
M800517-C
M800518-C
M800519-C
Size
mm
15
16
17
18
19
Pack.
qty
1
1
1
1
1
Socket. With 3/8" square-drive.
"Teng Tools" Deep. Chrome vanadium steel. Satin finish. According to standard DIN 3124/ISO 2725.
Metric series
AF series
Teng Tools M3806-C
Teng Tools M3802-C
Art. no.
Size
Pack.
Art. no.
Size
Size
3586
mm
qty
6997
AF
mm
-0055
7
10
-0105
8
10
-0154
9
10
-0204
10
10
-0101
3/8
9.5
10
-0253
11
10
-0200
7/16
11.1
10
-0303
12
10
-0402
13
10
-0309
½
12.7
10
-0451
14
10
-0408
9/16
14.3
10
-0477
15
10
-0493
16
10
-0507
5/8
15.9
10
-0501
17
10
-0606
11/16
17.5
10
-0550
18
10
-0600
19
10
-0705
¾
19.1
10
310
Please quote the
Pack.
qty
Art. no.
6997
-0804
-0903
AF series
Teng Tools M3802-C
Size
Size
AF
mm
13/16
20.6
7/8
22.2
Pack.
qty
-
Spark plug socket. With 3/8" square-drive.
Hand tools
Metric series
Teng Tools M3806-C
Art. no.
Size
Pack.
3586
mm
qty
-0709
20
10
-0808
21
10
-0907
22
10
4
"Teng Tools" Chrome vanadium steel. With 6 point opening. With rubber insert. External hexagonal grip 24 mm for
tightening with a spanner. Satin finish.
Art. no.
3982
-0055
-0105
-0121
-0154
-0204
-0303
Teng Tools No
M380039-C M380040-C M380041M380042-C M380046-C M380047CFlexible
CFlexible
Size
mm
14
16
16
18
21
21
Length
mm
64
64
85
70
70
91
Pack.
qty
10
10
10
10
10
10
Socket for int. hex holes. With 3/8" square-drive
"Teng Tools" Short sockets for internal hex holes. For hand tightening. Chrome vanadium steel. Satin finish.
Metric series
AF series
Teng Tools M3815-C
Teng Tools M3801-C
Art. no.
Size
Pack.
Art. no.
Size
Size
Pack.
10207
mm
qty
11482
AF
mm
qty
-0103
3/32
2.4
10
-0109
3
10
-0202
1/8
3.2
10
-0208
4
10
-0301
5/32
4.0
10
-0307
5
10
-0400
3/16
4.8
10
-0406
5.5
10
-0509
7/32
5.6
10
-0505
6
10
-0608
¼
6.4
10
-0604
7
10
-0703
8
10
-0707
5/16
7.9
10
-0802
10
10
-0806
3/8
9.5
10
-0901
12
10
-
TX-socket. With 3/8" square-drive
"Teng Tools" Chrome vanadium steel. For internal TX heads. The head gives minimal loss of torque transmission.
For hand tightening. Satin finish.
Art. no.
10208
-0108
-0207
-0306
-0405
-0504
"Teng Tools M3812T-C"
No
TX 10
TX 15
TX 20
TX 25
TX 27
Max. head width
mm
2.74
3.27
3.86
4.43
4.43
For screw
M
3-3.5
3.5-4
4-5
4.5-5
4.5-5
Length
mm
49.5
49.5
49.5
49.5
49.5
Pack.
qty
10
10
10
10
10
Art. no.
10208
-0603
-0702
-0801
-0900
No
TX 30
TX 40
TX 45
TX 50
Max. head width
mm
5.52
6.65
7.82
8.83
For screw
M
6-7
7-8
8-10
10
Length
mm
49.5
49.5
49.5
49.5
Pack.
qty
10
10
10
10
TX-socket. With 3/8" square-drive
"Teng Tools" Chrome vanadium steel. For internal TX heads (also for tamper proof screws). The head gives minimal
loss of torque transmission. For hand tightening. Satin finish.
Art. no.
10209
-0107
-0206
-0305
Teng Tools M3812-C
No
TPX 10
TPX 15
TPX 20
Max. head width
mm
2.74
3.27
3.86
For screw
M
3-3.5
3.5-4
4-5
Length
mm
49.5
49.5
49.5
Pack.
qty
10
10
10
Art. no.
10209
-0404
-0503
-0602
Teng Tools M3812-C
No
TPX 25
TPX 27
TPX 30
Max. head width
mm
4.43
4.43
5.52
For screw
M
4.5-5
4.5-5
6-7
Length
mm
49.5
49.5
49.5
Pack.
qty
10
10
10
Art. no.
10209
-0701
-0800
-0909
Teng Tools M3812-C
No
TPX 40
TPX 45
TPX 50
Max. head width
mm
6.65
7.82
8.83
For screw
M
7-8
8-10
10
Length
mm
49.5
49.5
49.5
Pack.
qty
10
10
10
311
Hand tools
4
TX-socket. With 3/8" square-drive.
"Teng Tools" Made of chrome vanadium steel. For external TX heads. The head gives minimal loss of torque transmission. Satin finish.
Art. no.
10169
-0105
-0204
-0303
-0402
-0501
Teng Tools
No
M380710-C
M380712-C
M380714-C
M380716-C
M380718-C
TX
No
E 10
E 12
E 14
E16
E 18
For screw
M
8
10
12
12
14
Length
mm
28
28
28
28
28
Pack.
qty
10
10
10
10
10
Bit socket. With 3/8" square-drive.
"Teng Tools" With hexagon for standard ¼ " screwdriver bits. Chrome vanadium steel. Satin finish.
Art. no.
3581
-0100
Teng Tools
No
M380060-C
For bits hex
tum
¼
Length
mm
28
Pack.
qty
10
Socket. With ½" square-drive.
"Teng Tools" With 6 point and 12 point openings. Chrome vanadium steel. Satin finish. According to standard DIN
3124/ISO 2725.
Size
6 piont
12 point
12 point
Millimetre series
Millimetre series
AF series
Teng Tools M1205-6-C Teng Tools M1205-C
Teng Tools M1201-C
Art. no
Pack
Art. no
Pack
Size
Size
Art. no
Pack
mm
7431
qty
7431
qty
AF
mm
7431
qty
8
-0038
10
9
-0061
10
10
-3008
10
-0103
10
3/8
9.5
-5508
10
11
-3107
10
-0202
10
7/16
11.1
-5607
10
12
-3206
10
-0301
10
13
-3305
10
-0400
10
½
12.7
-5706
10
14
-3404
10
-0509
10
9/16
14.3
-5805
10
15
-3503
10
-0608
10
16
-3602
10
-0707
10
5/8
15.9
-6001
10
17
-3701
10
-0806
10
11/16
17.5
-6100
10
18
-3800
10
-0905
10
19
-3909
10
-1002
10
¾
19.1
-6209
10
20
-4006
10
-1101
10
21
-4105
10
-1200
10
13/16
20.6
-6407
10
22
-4204
10
-1309
10
7/8
22.2
-6506
10
23
-4303
10
-1408
10
24
-4402
10
-1507
10
15/16
23.8
-6605
10
25
-4501
10
-1556
10
1
25.4
-6704
10
26
-4600
10
-1655
10
27
-4709
10
-1804
10
11/16
27
-6803
10
28
-4808
10
-1754
10
29
-4907
10
-1853
10
11/8
28.6
-6902
10
30
-5003
10
-2109
10
13/16
30.2
-7009
10
32
-5102
10
-2208
10
1¼
31.8
-7108
10
33
-2307
10
34
-5201
10
-
Socket. With ½" square-drive.
"Teng Tools" Deep - length 79 mm. With 6 point and 12 point openings. Chrome vanadium steel. Satin finish. According to standard DIN 3124/ISO 2725.
Size
6 point
12 point
Teng Tools M1206-6-C
Teng Tools M1206-C
Art. no.
Pack.
Art. no.
Pack.
mm
2573
qty
2573
qty
10
-0102
10
11
-0201
10
12
-0300
10
13
-2009
10
-0409
10
14
-2108
10
-0508
10
15
-2207
10
-0607
10
16
-2306
10
-0706
10
17
-2405
10
-0805
10
18
-2504
10
-0904
10
19
-2603
10
-1001
10
312
Please quote the
mm
20
21
22
24
27
30
32
36
6 point
Teng Tools M1206-6-C
Art. no.
Pack.
2573
qty
-2702
10
-
-1100
-1209
-1308
-1407
-1506
-1605
-1704
-1803
12 point
Teng Tools M1206-C
Art. no.
Pack.
2573
qty
10
10
10
10
10
10
10
10
Hand tools
Size
4
Spark plug socket. With ½" square-drive.
"Teng Tools" Chrome vanadium steel. With 6 point openings. Satin finish. With rubber insert. External hexagonal
grip 24 mm for tightening with a spanner.
Art. no.
6979
-0103
-0202
-0301
Teng Tools
No
M120040-C
M120042-C
M120046-C
Size
mm
16
18
21
Length
mm
70
70
70
Pack.
qty
10
10
10
Socket for int. hex holes. With ½" square-drive
"Teng Tools" 1/2" drive sockets for internal hex holes. For hand tightening. Satin finish.
Art. no.
6820
-0104
-0203
-0302
-0401
Teng Tools M1215-CSize mm
5
6
7
8
Total length
mm
55
55
55
55
Pack.
qty
10
10
10
10
Art. no.
6820
-0609
-0708
-0807
-0906
Teng Tools M1215-CSize mm
10
12
14
17
Total length
mm
55
55
55
55
Pack.
qty
10
10
10
10
-0500
9
55
10
Socket for int. hex holes. With ½" square-drive.
"Teng Tools" Long sockets for hex type bits. For hand tightening. Chrome vanadium steel. Satin finish.
Art. no.
11745
-0106
-0205
-0304
-0403
-0502
"Teng Tools M1225-C"Size
mm
5
6
7
8
10
Total length
mm
100
100
100
100
100
Pack.
qty
10
10
10
10
10
-0601
12
100
10
Sockets in set for int. hex holes. With ½" square-drive.
"Teng Tools" Set consisting of 20 sockets for internal hex holes, (short and long bits). In addition, includes 2 adaptors and a hexagon screwdriver. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
6885
-0106
Teng Tools
No
TTHEX23
mm
5 6 7 8 9 10
mm
12 14 17 19
mm
5 6 7 8 9 10
mm
12 14 17 19
Adaptor
Adaptor
Hexagon screwdriver
mm
2.0
Case size
mm
265x142x50
Weight
kg
1.1
Pack.
set
1
TX-socket. With ½" square-drive
"Teng Tools" Series Mecca Rosso. Chrome vanadium steel. For internal TX heads. The head gives minimal loss
of torque transmission. For hand tightening. Satin finish.
Art. no.
11740
-0101
-0200
-0309
-0408
-0507
No
TX 20
TX 25
TX 27
TX 30
TX 40
Max. head width
mm
3.86
4.43
4.99
5.52
6.65
For screw
M
4-5
4.5-5
4.5-6
6-7
7-8
Length
mm
55
55
55
55
55
Pack.
qty
10
10
10
10
10
Art. no.
11740
-0606
-0705
-0804
-0903
No
TX 45
TX 50
TX 55
TX 60
Max. head width
mm
7.82
8.83
11.22
13.25
For screw
M
8-10
10
12
14
Length
mm
55
55
55
55
Pack.
qty
10
10
10
10
313
Hand tools
4
TX-socket. With ½" square-drive
"Teng Tools" For internal TX heads (also for tamper proof screws). The head gives minimal loss of torque transmission. For hand tightening. Satin finish.
Art. no.
6825
-0109
-0208
-0307
Teng Tools M1212-C
TPX20
25
27
Size
mm
3.86
4.43
4.99
For screw
M
4-5
4.5-5
4.5-6
Length
mm
55
55
55
Pack.
qty
10
10
10
Art. no.
6825
-0406
-0505
-0604
Teng Tools M1212-C
TPX30
40
45
Size
mm
5.52
6.65
7.82
For screw
M
6-7
7-8
8-10
Length
mm
55
55
55
Pack.
qty
10
10
10
Art. no.
6825
-0703
-0802
-0901
Teng Tools M1212-C
TPX50
55
60
Size
mm
8.83
11.22
13.25
For screw
M
10
12
14
Length
mm
55
55
55
Pack.
qty
10
10
10
Long TX-socket. With ½" square-drive - M1222T
"Teng Tools" Long sockets for internal heads. For hand tightening. The head gives minimal loss of torque transmission. Chrome vanadium steel. Satin finish.
Art. no.
11744
-0107
-0206
-0305
-0404
-0503
TX20
25
27
30
40
Max. head width
mm
3.86
4.43
4.99
5.52
6.65
For screw
M
4-5
4.5-5
4.5-6
6-7
7-8
Length
mm
100
100
100
100
100
Pack.
qty
10
10
10
10
10
Art. no.
11744
-0602
-0701
-0800
-0909
-1006
TX45
50
55
60
70
Max. head width
mm
7.82
8.83
11.22
13.25
15.55
For screw
M
8-10
10
12
14
16
Length
mm
100
100
100
100
100
Pack.
qty
10
10
10
10
10
TX socket with ½" square-drive
"Teng Tools" Long sockets for internal TX-heads (also for tamper proof screws). For hand tightening. The head
gives minimal loss of torque transmission. Chrome vanadium steel. Satin finish.
Art. no.
11746
-0105
-0204
-0303
Teng Tools M1222-C
TPX20
25
27
Max. head width
mm
3.86
4.43
4.99
For screw
M
4-5
4.5-5
4.5-6
Length
mm
100
100
100
Pack.
qty
10
10
10
Art. no.
11746
-0402
-0600
-0709
Teng Tools M1222-C
TPX30
45
50
Max. head width
mm
5.52
7.82
8.83
For screw
M
6-7
8-10
10
Length
mm
100
100
100
Pack.
qty
10
10
10
Art. no.
11746
-0808
-0907
-1004
Teng Tools M1222-C
TPX55
60
70
Max. head width
mm
11.22
13.25
15.55
For screw
M
12
14
16
Length
mm
100
100
100
Pack.
qty
10
10
10
Socket bits in set. With ½" square-drive.
"Teng Tools" Set consisting of fifteen 100 mm long bit sockets, nine for internal TX heads and six for hex type bits.
Satin finish. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
11889
-0102
Teng Tools
No
TTTXH15
No. of pieces
ea.
15
Sockets for int. TX heads
TX
20 25 27 30 40 45 50 55 60
Sockets for int. hex holes
mm
5 6 7 8 10 12
Case size LxWxH
mm
265x142x50
Weight
kg
1.4
Pack.
sts
1
314
Please quote the
"Teng Tools" Set consisting of 20 bits (short and long) for internal TX heads TX-system. For hand tightening. In
addition, includes two adaptors and a hexagon screwdriver.
Art. no.
6886
-0105
Teng Tools
No
TTTX23
No. of pieces
ea.
23
TX
20 25 27 30 40 45 50 55
TX
60 70
TX
20 25 27 30 40 45 50 55
TX
60 70
Bit socket
Bit socket
Hexagon screwdriver
mm
2.0
Case size LxWxH
mm
265x142x50
Weight
kg
1.1
Pack.
set
1
Hand tools
TX bits in set. With ½" square-drive.
4
TX-socket. With ½" square-drive.
"Teng Tools" For external TX heads. The head gives minimal loss of torque transmission. Chrome vanadium steel.
Satin finish.
Art. no.
11207
-0107
-0206
-0305
Teng Tools M1207-C
E 10
E 11
E 12
Max. head width
mm
9.3
9.7
10.8
For screw
M
8
10
Length
mm
37.8
37.8
37.8
Pack.
qty
10
10
10
Art. no.
11207
-0404
-0503
-0602
Teng Tools M1207-C
E 14
E 16
E 18
Max. head width
mm
12.8
14.6
16.6
For screw
M
12
12
14
Length
mm
37.8
37.8
37.8
Pack.
qty
10
10
10
Art. no.
11207
-0701
-0800
-0909
Teng Tools M1207-C
E 20
E 22
E 24
Max. head width
mm
18.4
20.3
22.16
For screw
M
16
10
18-20
Length
mm
37.8
37.8
37.8
Pack.
qty
10
10
10
Socket. With ¾" square-drive
"Teng Tools" Chrome vanadium steel. With 6-point and 12-point openings. Satin finish.
Millimetre-series
American-series
Teng Tools M-C6-point
Teng Tools M3401-C12-point
Art. no.
Size
Length
Pack.
Art. no.
Size
Size
Length
grip
grip
grip
3620
mm
mm
qty
11493
AF
mm
mm
-0103
19
48.2
1
-0100
¾
19
50
-0202
21
49.5
1
-0301
22
49.5
1
-0209
7/8
22.2
51
-0400
24
50.8
1
-0308
15/16
23.8
51
-0459
26
52.0
1
-0407
1
25.4
51
-0509
27
52.0
1
-0506
11/16
27
51
-0605
11/8
28.6
51
-0608
30
53.2
1
-0704
13/16
30
53
-0707
32
54.8
1
-0803
1¼
31.8
55
-0806
33
55.5
1
-0902
15/16
33.3
55
-0905
34
55.8
1
-1009
13/8
34.9
57
-1002
36
57.2
1
-1108
17/16
36.5
57
-1101
38
59.5
1
-1207
1½
38
57
-1200
41
63.2
16
-1306
15/8
41.3
63
-1405
1¾
44.5
65
-1309
46
67.1
1
-1504
13/16
46
67
-1603
17/8
47.9
69
-1408
50
71.0
1
-1702
2
50.8
71
Pack.
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
315
Hand tools
4
Socket. With 1" square-drive.
"Teng Tools" Chrome vanadium steel. With 12 point openings. Satin finish.
Metric series
AF series
Teng Tools M1105
Teng Tools 1101
Art. no.
Socket
Pack.
Art. no.
Size
Size
11484
mm
qty
11485
AF
mm
-0101
36
1
-0100
17/16
36.5
-0209
1½
38.1
-0200
41
1
-0308
111/16
42.9
-0309
46
1
-0407
17/8
47.6
-0408
50
1
-0506
2
50.8
-0507
55
1
-0606
58
1
-0705
60
1
-0704
23/8
60.3
-0804
65
1
-0803
25/8
66.7
-0903
70
1
-1000
75
1
-0902
215/16
74.6
-1109
80
1
-1009
31/8
79.4
Förp.
qty
1
1
1
1
1
1
1
1
1
Socket tools
Ratchet handles
Ratchet handle
"Gedore" With through drive stud. Of chrome vanadium steel. Chromium plated.
Art. no.
1174
-0107
-0206
-0305
Gedore
No
2093Z/94
3093Z/94
1993Z/94
Drive square inch
¼
3/8
½
No. of teeth
40
36
52
Length
mm
127
200
270
Pack.
qty
5
5
5
-0404
3293Z/94
¾
36
510
1
-0503
2193Z/94
1
40
720
1
Mini T-handle ratchet with ¼" drive
"Teng Tools" Chromevanadium steel. Mini palm ratchet - ideal for use where space is very restricted.
Art. no.
13209
-0101
Teng Tools
No
1400M
Drive square
inch
¼
Number of teeth
45
Height
mm
29
Length
mm
76
Pack.
qty
10
Ratchet handle
"Teng Tools" With fixed drive. Patented fibre reinforced ratchet handles. Light and strong. Adjustable with lever for
reversible action. Locking button, and quick release for switching sockets.
Art. no.
7429
-0107
-0206
-0305
Teng Tools
No
1400FRP
3800FRP
1200FRP
Drive square
inch
¼
3/8
½
No. of teeth
ea.
45
45
45
Length
mm
150
200
270
Pack.
qty
5
5
5
Repair set
7429
-1006
-1105
-1204
Teng Tools
No
1400FRPK
3800FRPK
1200FRPK
Pack.
set
10
10
10
Repair set (box model)
7372
-2050
-2159
-2209
Teng Tools
No
1400NRK
3800NRK
1200NRK
Pack.
set
10
10
10
Ratchet handle
"Teng Tools" With fixed drive. Chrome vanadium steel. With reversing lever. Locking button, and quick release for
switching sockets. Satin finish. Two component handle.
Art. no.
11739
-0104
-0203
-0302
Teng Tools
No
1400-72
3800-72
1200-72
Drive square
inch
¼
3/8
½
No. of teeth
72
72
72
Length
mm
142
211
257
Pack.
qty
10
10
10
Repair kit
11739
-1300
-1409
-1508
Teng Tools
No
1400-72RK
3800-72RK
1200-72RK
Pack.
sts
10
10
10
316
Please quote the
"Teng Tools" Industrial quality. Equipped with removable ratchet head. Lever for changing between right and lefthand action and button for loosening/switching sockets.
No 14382. Black handle. No 14381. Knurled handle and removable head.
Art. no.
14382-0108
14381-0109
Teng Tools
No
M3400-72
M1100-72
Drivesquare
inch
¾
1
No. of teeth
ea.
72
72
Length
mm
505
800
Weight
kg
2.00
4.06
Pack.
qty
3
2
Repair set
14382-1007
14381-1008
Teng Tools
No
M3400-72RK
M1100-72RK
Pack.
set
1
1
Hand tools
Ratchet handle - 2-part
4
Ratchet handle set
"Teng Tools" Set with 3 ratchet handles. The ratchet handles have 72 teeth, are adjustable using a reversing lever and
equipped with a button for locking, removing/switching sockets. Matt chromium plated. Two component handle. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
12821
-0101
Teng Tools
No
TT7203
Drive square
inch
¼, 3/8, ½
Lengths
mm
142, 211, 257
Case size LxWxH
mm
265x142x50
Weight
kg
0.9
Pack.
set
1
Long ratchet with ½" square drive
"Teng Tools" Long ratchet with 60 teeth. Supplied with flip reverse and quick release function. Two component handle with non slip sections. Satin finish.
Art. no.
14383
-0107
Teng Tools
No
1200L
Drive square
tum
½
Number of teeth
qty
60
Length
mm
432
Weight
kg
0.8
Pack.
qty
5
Flexible ratchet handle
"Teng Tools" Swivel Stubby-Model. With 72 teeth. Adjustable with reversing lever and with release button for quick
locking/switching between different sockets.
Art. no.
12820
-0102
Teng Tools
No
1400-72ST
Drive square
inch
¼
Length
mm
142
Pack.
qty
5
Repair set
12820
-1001
Teng Tools
No
1400-72StrK
Pack.
set
10
Ratchet handle
"Teng Tools" Swivel. With fixed drive. Reversible and with lever for quick release and switching sockets. Satin finish.
Two component handle.
Art. no.
11806
-0102
Teng Tools
No
1200F
Drive square
inch
½
No. of teeth
ea.
60
Length
mm
432
Pack.
qty
5
Spare part set
11806
-0201
Teng Tools
No
1200FRK
Pack.
sts
10
317
Hand tools
4
Adaptor drives
Adaptor drive
"Teng Tools" Chrome vanadium steel. No M380035-C and M120036-C with hole for turning using an extension bar.
Satin finish.
Art. no.
3564
-0101
-0200
-0309
Teng Tools
No
M380035-C
M120036-C
M340086-C
Drive int. square
inch
3/8
½
¾
Drive ext. square
inch
¼
3/8
½
Length
mm
30
40
40
Pack.
qty
10
10
1
Adaptor drives
Adaptor drive
"Teng Tools" Chrome vanadium steel. No M380036-C and M110030 with hole for turning using an extension bar.
Satin finish.
Art. no.
3565
-0050
-0100
-0209
-0308
-0407
Teng Tools
No
M140036-C M380036-C M120037-C M340085-C M110030
Drive int. square
inch
¼
3/8
½
¾
1
Drive ext. square
inch
3/8
½
¾
1
1
With hole for turning usno
yes
no
no
yes
ing an extension bar
Length
mm
25
40
39.5
62
82
Pack.
qty
10
10
10
1
1
Flexible handles
Swivel handle
"Teng Tools" Made of chrome vanadium steel. Matt chromium plated. Two component handle.
Type S with safety mechanism that secures the socket.
Art. no.
7398
-0104
-0203
-0252
-0302
Teng Tools
No
M120010-C
1201
1201A
M340070-C
Drivesquare
inch
½
½
½
¾
Length
mm
250
425
600
475
Pack.
qty
10
10
5
Spare square drive
7398
-1003
Pack.
qty
10
-
-0401
M340070S-C
¾
475
-
Speed braces
Speed brace
"Teng Tools" Chrome vanadium steel. Satin finish. Plastic handle.
Art. no.
11204
-0100
Teng Tools
No
M380011-C
Drive square
inch
3/8
Length
mm
380
Pack.
qty
10
-0209
M120011-C
½
420
10
Extension bars
Extension bar
"Teng Tools" Chrome vanadium steel. Satin finish.
Art. no.
0679
-0109
-0158
Teng Tools
No
M140020-C
M140023-C
Drive square inch
¼
¼
Length
mm
50
75
Pack
qty
10
10
Art. no.
0679
-0406
-0455
Teng Tools
No
M380020-C
M380023-C
Drive square inch
3/8
3/8
Length
mm
75
125
Pack
qty
10
10
-0208
M140021-C
¼
100
10
-0505
M380021-C
3/8
150
10
-0307
M140022-C
¼
150
10
-0604
M380022-C
3/8
250
10
-0356
M140024-C
¼
300
10
-0703
M380024-C
3/8
500
10
Extension bar
"Teng Tools" Chrome vanadium steel. Satin finish. Type S with safety locking mechanism.
Art. no.
7386
-0108
-0207
-0256
-0306
Teng Tools
No
M120020-C M120021
M120023-C M120022-C
Drive square
inch
½
½
½
½
Length
mm
60
125
150
250
Pack.
qty
10
10
10
10
318
Please quote the
-0355
M120024-C
½
500
10
7386
No
inch
mm
qty
7386
No
inch
mm
qty
-0405
M340020-C
¾
100
1
-0652
M340022S-C
¾
400
-
-0454
M340020S-C
¾
100
-0702
M110040
1
300
1
-0504
M340021-C
¾
200
1
-0801
M110050
1
400
5
-0553
M340021S-C
¾
200
-
-0603
M340022-C
¾
400
1
Hand tools
Art. no.
Teng Tools
Drive square
Length
Pack.
Art. no.
Teng Tools
Drive square
Length
Pack.
4
Extension bar
"Teng Tools" The drive is designed so that the socket swivels for improved access. Chrome vanadium steel. Satin
finish.
Art. no.
0110
-1708
-1807
-1906
-2003
-2102
-2201
Teng Tools
No
M 380020 M 380021 M 380022 M 120020 M 120021 M 120022
Drive square
inch
3/8
3/8
3/8
½
½
½
Length
mm
75
150
250
75
150
250
Pack.
qty
10
10
10
10
10
10
Extension bar with through holes and male hex 19 mm
"Teng Tools" Extension bar with through holes for applications together with ratchet handle no 14412 and sockets
no 14411. Specially designed for tightening nuts on stud bolts. Satin finish.
Art. no.
14413
-0101
Teng Tools
No
M800023-C
Connection int. hexagon
mm
19
Connection ext. hexagon
mm
19
Length
mm
75
Pack.
qty
10
Screwdriver handles
Screwdriver handle
"Teng Tools" Flexible screwdriver handle. With ¼" square drive for bit sockets and standard sockets. Black plastic
handle with external hexagonal grip for tightening with a spanner.
Only for right hand action (permitted load 5 Nm).
Art. no.
0018
-0109
Teng Tools
No
MD514
Drive square
inch
¼
Total length
mm
260
Pack.
qty
10
Screwdriver handle
"Teng Tools" Chrome vanadium steel. With square-drive for sockets and socket tools. Handle part has internal
square-drive for connection to, e.g. a T-handle.
Art. no.
3486
-0106
Teng Tools
No
M140015-C
Drive square
inch
¼
Overall length
mm
150
Pack
qty
10
Screwdriver handle
"Teng Tools" Chrome vanadium steel. With 3/8" square-drive for sockets and socket tools. Two part plastic handle.
Handle part has internal 3/8" square-drive for connection to, e.g. a T-handle.
Art. no.
0305
-0101
Teng Tools
No
PT3810R
Drive square
inch
3/8
Total length
mm
250
Pack.
qty
10
Flexible extensions
Flexible extension
"Teng Tools" Chrome vanadium steel. Flexible section covered with plastic. Equipped with square-internal and external drives. Only for right hand action, max. permitted load 5 Nm.
Art. no.
2996
-0101
Teng Tools
No
M140038-C
Drive square
inch
¼
Length
mm
150
Pack.
qty
10
319
Hand tools
4
Swivel head
Swivel head
"Teng Tools" Swivel head of chrome vanadium steel. Satin finish.
Art. no.
3585
Teng Tools
No
Drive square
inch
Pack.
qty
-0106
M120080-C
½
10
Universal joints
Universal joint
"Teng Tools" Universal joint. Chrome vanadium steel. Satin finish.
Art. no.
7411
-0057
-0073
Teng Tools
No
M140030-C
M380030-C
Drive square
inch
¼
3/8
Pack.
qty
10
10
-0107
M120030-C
½
10
-0206
M340030-C
¾
1
Impact sockets
Thin walled impact sockets with ¼" square-drive
"Teng Tools" Thin walled. Chrome molybdenum. 6 point. Black.
Size
Standard-length Teng Tools 9605-C
Length
Art. no.
mm
mm
13243
6
21
-0109
10
7
21
-0208
10
8
21
-0307
10
10
21
-0406
10
13
21
-0505
10
Pack.
qty
Impact sockets. With ¼" square-drive.
"Momento" Made of Swedish quality steel. With hexagon openings. Blackened finish.
Example of spanner openings and standard socket types manufactured by Momento.
Metric series
AF series
Momento 0 Standard length
Momento 0 Standard length
Size
Art. no.
Length
Pack.
Size
Size
Art. no.
Length
mm
6742
mm
qty
AF
mm
6742
mm
4
-0109
25
1
3/16
4.7
(-1404)
25
4.5
-0208
25
1
5
-0307
25
1
5.5
-0406
25
1
6
-0505
25
1
¼
6.4
-1503
25
7
-0604
25
1
8
-0703
25
1
5/16
7.9
(-1602)
25
9
-0802
25
1
10
-0901
25
1
3/8
9.5
-1701
25
11
-1008
25
1
7/16
11.1
(-1800)
25
12
-1107
25
1
½
12.7
(-1909)
25
13
-1206
25
1
14
-1305
25
1
-
Pack.
qty
1
1
1
1
1
1
-
Impact sockets. With 3/8" square-drive.
"Teng Tools" Made of chrome-molybdenum special steel. With 6 point openings. Black.
Standard length Teng Tools 9805-C
Deep Teng Tools 9806-C
Size
Art. no.
Length
Pack.
Art. no.
Length
Pack.
mm
11483
mm
qty
11486
mm
qty
8
-0102
30
10
-0109
65
10
10
-0201
30
10
-0208
65
10
11
-0300
30
10
-0307
65
10
12
-0409
30
10
-0406
65
10
13
-0508
30
10
-0505
65
10
14
-0607
30
10
-0604
65
10
16
-0706
30
10
-0703
65
10
17
-0805
30
10
-0802
65
10
19
-0904
30
10
-0901
65
10
320
Please quote the
Metric series
AF series
"Momento 1" Standard length
"Momento 1 L" Long
Size Art. no. Length Pack. Art. no. Length Pack.
Size
Size Art. no. Length Pack.
mm
5973
mm
qty
5977
mm
qty
AF
mm
5973
mm
qty
6
-0101 34
1
¼
6.4
-1406 34
1
7
-0200 34
1
8
-0309 34
1
-0305 57
1
5/16
7.9
-1505 34
1
9
-0408 34
1
10
-0507 34
1
-0503 57
1
3/8
9.5
-1604 34
1
11
-0606 34
1
-0602 57
1
7/16
11.1
-1703 34
1
12
-0705 34
1
-0701 57
1
½
12.7
-1802 34
1
13
-0804 34
1
-0800 57
1
14
-0903 34
1
9/16
14.3
-1901 34
1
15
-1000 34
1
16
-1059 34
1
-1105 57
1
5/8
15.9
-2008 34
1
17
-1109 34
1
-1204 57
1
11/16
17.5
-2107 34
1
18
-1208 34
1
-1303 57
1
19*
-1307 34
1
-1402 57
1
¾*
19
-1307 34
1
21
-1356 34
1
-
Hand tools
Impact socket. With 3/8" square-drive.
4
Thin walled impact sockets. With 3/8" square-drive.
"Momento" Made of Swedish quality steel. Thin walled. With hexagon openings. Blackened finish.
Metric series
"Momento T1" Stand. length
"Momento T1 L" Long
Size
Art. no.
Length
Pack.
Art. no.
Length
Pack.
mm
11331
mm
qty
11331
mm
qty
8
-0056
34
1
10
-0106
34
1
-1005
57
1
11
-0205
34
1
12
-0304
34
1
-1104
57
1
13
-0403
34
1
-1203
57
1
14
-0502
34
1
15
-0601
34
1
-
Impact socket bits for hex holes - 3/8" square-drive
"Teng Tools" Impact socket bits for internal hexagon holes. Chrome molydenum. The socket bits are supplied with
hole for retaining pin and grove for retaining ring. Black.
Art. no.
15143
-0105
-0204
-0303
-0402
Teng Tools 9815Size
mm
4
5
6
7
Length
mm
52
52
52
52
Suitable retaining pin
Nr
P90320
P90320
P90320
P90320
Suitable retaining ring
Nr
O935202
O935202
O935202
O935202
Pack.
Art. no.
15143
-0501
-0600
-0709
Teng Tools 9815Size
mm
8
10
12
Length
mm
52
52
52
Nr
P90320
P90320
P90320
Nr
O935202
O935202
O935202
Pack.
-
Impact sockets. With ½" square-drive
"Teng Tools" Made of chrome-molybdenum special steel. With 6-point openings. The sockets are equipped with a
hole for a locking pin that locks the socket on the machines square drive. Black.
Size
Standard-length
Long
For
For
grip
Teng Tools 9205-C
Teng Tools 9206-C
locklockLength
Art. no.
Pack.
Length
Art. no.
Pack.
ring
pin
mm
mm
10178
qty
mm
10178
qty
No
No
8
38
-0021
10
O935202 P90320
10
38
-0039
10
78
-0930
10
O935202 P90320
11
38
-0062
10
78
-0963
10
O935202 P90320
12
38
-0096
10
78
-0997
10
O935202 P90320
13
38
-0104
10
78
-1003
10
O935202 P90320
14
38
-0153
10
78
-1052
10
O935202 P90320
15
38
-0203
10
78
-1102
10
O93525
P90324
16
38
-0302
10
78
-1201
10
O93525
P90324
17
38
-0401
10
78
-1300
10
O93525
P90324
321
Hand tools
4
Size
grip
mm
18
19
20
21
22
23
24
25
26
27
28
29
30
32
35
36
Standard-length
Teng Tools 9205-C
Length
Art. no.
Pack.
mm
Size
grip
38
38
38
38
38
38
38
45
50
50
50
50
50
50
Size
grip
inch
7/16
½
9/16
5/8
11/16
¾
13/16
7/8
15/16
1
15/16
1½
mm
11.1
12.7
14.3
15.9
17.5
19
20.6
22.2
23.8
25.4
33.3
38
Long
Teng Tools 9206-C
Length
Art. no.
Pack.
For
lock-
10178
qty
mm
10178
qty
-0500
10
78
-1409
10
-0609
10
78
-1508
10
-0633
10
-0658
10
78
-1557
10
-0708
10
78
-1607
10
-0757
10
-0807
10
78
-1706
10
-0815
10
-0823
10
-0831
1
78
-1805
10
-0849
10
78
-1904
10
-0856
10
78
-2001
10
-0864
10
78
-2100
10
-0872
10
78
-2209
10
78
-2308
10
78
-2407
10
Standard-length
Long
Teng Tools 9201-C
Teng Tools 9202-C
Length
Art. no.
Pack.
Length
Art. no.
Pack.
mm
38
38
38
38
38
38
38
38
38
38
38
38
11487
-0108
-0207
-0306
-0405
-0504
-0603
-0702
-0801
-0900
-1007
-
qty
10
10
10
10
10
10
10
10
10
10
-
mm
78
78
78
78
78
78
78
78
78
78
78
78
11487
-2005
-2104
-2203
-2302
-2401
-2500
-2609
-2708
-2807
-2906
-3003
-3102
qty
10
10
10
10
10
10
10
10
10
10
10
10
ring
No
O93525
O93525
O93525
O93525
O93525
O93525
O93525
O93525
O93525
O93525
O93525
O93525
O93525
O93525
O93525
O93525
For
lockring
No
O935202
O935202
O935202
O935202
O935202
O935202
O935202
O935202
O93530
O93532
O93534
O93534
For
lockpin
No
P90324
P90324
P90324
P90324
P90324
P90324
P90324
P90324
P90324
P90324
P90324
P90324
P90324
P90324
P90324
P90324
For
lockpin
No
P90320
P90320
P90320
P90320
P90320
P90320
P90320
P90320
P93028
P93028
P93032
P93032
Impact socket. With ½" square-drive.
Metric series
"Momento 4 L" Long
mm
5941
mm
qty
5942
mm
qty
10
-0100
38
1
-0109
82
1
11
-0209
38
1
-0208
82
1
12
-0308
38
1
-0307
82
1
13
-0407
38
1
-0406
82
1
14
-0506
38
1
-0505
82
1
15
-0605
38
1
-0604
82
1
16
-0654
38
1
-0653
82
1
17
-0704
38
1
-0703
82
1
18
-0803
38
1
-0802
82
1
19*
-0902
38
1
-0901
82
1
21
-1009
38
1
-1008
82
1
22
-1108
38
1
-1107
82
1
23
-1207
38
1
-1206
82
1
24
-1306
40
1
-1305
82
1
27*
-1405
45
1
-1404
82
1
28
-1504
45
1
-1503
82
1
30*
-1603
50
1
-1545
82
1
32
-1702
50
1
-1586
82
1
322
Please quote the
Size
AF
3/8
7/16
½
9/16
5/8
11/16
3/4*
13/16
7/8
15/16
1
11/16*
11/8
13/16*
1¼
AF series
Size
Art. no. Length Pack.
mm
5941
mm
qty
9.5
-2007
38
1
11.1
-2106
38
1
12.7
-2205
38
1
14.3
-2304
38
1
15.9
-2403
38
1
17.5
-2502
38
1
19
-0902
38
1
20.6
-2700
38
1
22.2
-2809
38
1
23.8
-2908
40
1
25.4
-3005
40
1
27
-1405
45
1
28.6
-3203
45
1
30
-1603
50
1
31.8
-3302
50
1
"Momento 4 L" Long
5942
mm
qty
(-1602)
82
1
(-1701)
82
1
-1800
82
1
(-1909)
82
1
(-2006)
82
1
-2105
82
1
-0901
82
1
-2303
82
1
(-2402)
82
1
-2501
82
1
(-2600)
82
1
-1404
82
1
-2808
82
1
-1545
82
1
-
"Teng Tools" Impct socket bits for internal hexagon holes. Chrome molydenum. The socket bits are suppplied with
hole for retaining pin and grove for retaining ring. Black.
Art. no.
15142
-0106
-0205
-0304
-0403
Teng Tools 9215-CSize
mm
5
6
8
10
Length
mm
78
78
78
78
Suitable locking pin
Nr
P90320
P90320
P90320
P90320
Suitable locking ring
Nr
O935202
O935202
O935202
O935202
Pack.
Art. no.
15142
-0502
-0601
-0700
-0809
Teng Tools 9215-CSize
mm
12
14
17
19
Length
mm
68
78
78
78
Nr
P90320
P90320
P90320
P90320
Suitable locking ring
Nr
O935202
O935202
O935202
O935202
Pack.
-
Hand tools
Impact socket bits for hex holes - ½" square-drive
4
Impact bits for TX heads with ½" squaredrive
"Teng Tools" Impact bits of chrome vanadium steel for internal TX heads. The shape of the head gives minimal
torque transmission losses.
Art. no.
12814
-0100
-0209
-0308
-0407
Teng Tools
No
921210TX-C
921215TX-C
921220TX-C
921225TX-C
TX-size
TX10
15
20
25
Max. head width
mm
2.74
3.27
3.86
4.43
For screw
M
3-3.5
3.5-4
4-5
4.5-5
Suitable retainer ring
No
O935202
O935202
O935202
O935202
No
P90320
P90320
P90320
P90320
Length
mm
78
78
78
78
Pack.
qty
1
1
1
1
Art. no.
12814
-0506
-0605
-0704
-0803
Teng Tools
No
921227TX-C
921230TX-C
921240TX-C
921245TX-C
TX-size
TX27
30
40
45
Max. head width
mm
4.99
5.52
6.65
7.82
For screw
M
4.5-6
6-7
7-8
8-10
No
O935202
O935202
O935202
O935202
No
P90320
P90320
P90320
P90320
Length
mm
78
78
78
78
Pack.
qty
1
1
1
1
Art. no.
12814
-0902
-1009
-1108
Teng Tools
No
921250TX-C
921255TX-C
921260TX-C
TX-size
TX50
55
60
Max. head width
mm
8.83
11.25
13.25
For screw
M
10
12
14
No
O935202
O935202
O935202
No
P90320
P90320
P90320
Length
mm
78
78
78
Pack.
qty
1
1
1
"Teng Tools" For domed cap nuts. Chrome-moly steel. Equipped with protective sleeve that protects when used
on aluminium rims. Example of spanner openings and standard socket types manufactured by Momento.
Art. no.
11835
-0107
-0206
-0305
Teng Tools
No
920517N
920519N
920521N
Size
mm
17
19
21
Length
mm
85
85
85
Pack.
qty
5
5
5
"Teng Tools" For domed cap nuts. Set of 3 chrome-moly steel sockets. Equipped with protective sleeve that protects when used on aluminium rims. Example of spanner openings and standard socket types manufactured by Momento.
Art. no.
11887
-0104
Teng Tools
No
9203N
Socket dimensions
mm
17, 19, 21
Length
mm
85
Pack.
qty
1
323
Hand tools
4
Impact sockets. With ½" square-drive.
"Momento" Made of Swedish quality steel. Thin walled. Wth 6-point openings. Blackened finish.
Millimetre-series
"Momento T4" Stand.-length
Size
Male
Art. no.
Length
grip
diameter
mm
mm
11332
mm
8
13
-0014
38
1
9
14.3
-0022
38
1
10
15.5
-0105
38
1
11
16.7
-0204
38
1
12
18
-0303
38
1
13
19.2
-0402
38
1
14
20.5
-0501
38
1
15
21.7
-0600
38
1
16
23
-0709
38
1
17
24.2
-0808
38
1
18
25.5
-0907
38
1
19*
26.7
-1004
38
1
20
27.9
-1103
38
1
21
29.2
-1202
38
1
22
30.5
-1301
38
1
24
33
-1400
1
Pack.
qty
Impact sockets. With ½" square-drive.
"Momento" Made of Swedish quality steel. With square openings for use on clean-out plugs in floor drains. Blackened finish. Example of spanner openings and standard socket types manufactured by Momento.
Art. no.
2795
-0104
-0203
-0302
-0401
Momento
4-4K½"
½"
½"
½"
Size square
mm
15
17
19
½"
Length
mm
50
50
50
50
Pack.
qty
1
1
1
1
Impact sockets. With ½" square-drive - Torx-sockets
"Momento" Torx-sockets made of Swedish quality steel. For external heads according to the Torx-system. The
head gives minimal loss of torque transmission. Also see information about Torx heads, see.
Art. no.
6158
-0304
-0403
-0502
-0601
Momento
4E 14
E 16
E 18
E 20
Max. head width
mm
12.90
14.76
16.70
18.39
For screw
M
12
12
14
16
Length
mm
38
38
38
38
Pack.
qty
1
1
1
1
Impact sockets. With ¾" square-drive.
"Teng Tools" Made of chrome-molybdenum special steel. With 6 point openings. The sockets are equipped with a
Size
Standard length
Deep
For
For
Teng Tools 9405
Teng Tools 9406
retaining
retaining
Length
Art. no.
Pack.
Length
Art. no.
Pack.
ring
pin
mm
mm
11488
qty
mm
11489
qty
No
No
19
50
-0107
1
95
-0106
1
O93538
P90437
21
50
-0156
1
95
-0155
1
O93538
P90437
22
50
-0172
1
95
-0171
1
O93538
P90437
23
50
-0198
1
95
-0197
1
O93538
P90437
24
52
-0206
1
95
-0205
1
O93538
P90437
27
52
-0305
1
95
-0304
1
O93538
P90437
28
52
-0404
1
O93538
P90437
30
52
-0503
1
95
-0403
1
O93538
P90437
32
52
-0602
1
95
-0502
1
O93538
P90437
33
56
-0701
1
95
-0601
1
O93538
P90437
34
56
-0800
1
95
-0700
1
O93538
P90437
36
56
-0909
1
95
-0809
1
O93538
P90437
38
56
-1006
1
95
-0908
1
O93538
P90437
41
58
-1105
1
95
-1005
1
O93538
P90437
46
63
-1204
1
95
-1104
1
O93538
P90437
324
Please quote the
Metric series
"Momento 2 L" Long
mm
5943
mm
qty
5944
mm
qty
16
-0033
50
1
17
-0058
50
1
-0057
100
1
18
-0108
50
1
(-0107) 100
1
19*
-0157
50
1
-0156
100
1
21
-0207
50
1
-0206
100
1
22
-0256
50
1
(-0255) 100
1
23
-0306
50
1
(-0305) 100
1
24
-0355
50
1
-0354
100
1
26
-0389
54
1
27*
-0405
54
1
-0404
100
1
28
-0454
54
1
-0453
100
1
29
-0462
54
1
30*
-0504
54
1
-0503
100
1
32
-0553
56
1
-0552
100
1
33
-0603
56
1
-0602
100
1
34
-0652
56
1
-0651
100
1
36
-0702
56
1
-0701
100
1
37
-0751
58
1
-0750
100
1
38*
-2559
58
1
-2202
100
1
41
-0850
58
1
-0859
100
1
42
-0900
63
1
(-0909) 100
1
43*
-2658
63
1
(-2400) 100
1
46*
-0959
63
1
-0958
100
1
47
-1007
70
1
50
-1205
70
1
-
AF series
Size
Size
AF
mm
5943
mm
qty
11/16
17.5
-2005
50
1
¾*
19
-0157
50
1
13/16
20.6
-2104
50
1
7/8
22.2
-2153
50
1
15/16
23.8
-2203
50
1
1
25.4
-2252
50
1
11/16*
27
-0405
54
1
11/8
28.6
-2351
54
1
13/16*
30
-0504
54
1
1¼
31.8
-2401
56
1
15/16
33.3
-2450
56
1
17/16
36.5
-2500
58
1
1½*
38
-2559
58
1
15/8
41.3
-2609
58
1
111/16* 43
-2658
63
1
113/16* 46
-0959
63
1
17/8
47.9
-2757
70
1
-
"Momento 2 L" Long
5944
mm
qty
(-1105) 100
1
-0156
100
1
(-1303) 100
1
(-1402) 100
1
-1501
100
1
-1600
100
1
-0404
100
1
-1808
100
1
-0503
100
1
(-1907) 100
1
-2004
100
1
(-2103) 100
1
-2202
100
1
(-2301) 100
1
(-2400) 100
1
-0958
100
1
(-2608) 100
1
-
Hand tools
Impact sockets. With ¾" square-drive.
4
Impact socket bit for hexagon holes. With ¾" square drive
"Teng Tools" Impact socket bit. Made of chrome-molybdenium steel. For internal hexagon holes
Art. no.
14398
-0100
-0209
-0308
Teng Tools
No
941519-C
941522-C
941524-C
For hexagon holes
mm
19
22
24
No.
O93538
O93538
O93538
No.
P90437
P90437
P90437
Length
mm
90
90
90
Pack.
qty
1
1
1
Sets
Impact socket set with ¼" and 3/8" square drives
"Teng Tools" 24 piece impact socket set. Contains 5 ¼" short sockets, 9 short sockets 3/8", 9 long sockets 3/8" and
one adaptor 3/8"-¼". Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no
13247
-0105
Teng Tools
No
TT9024
Short sockets, ¼" square drive
mm
6 7 8 10 13
Short sockets, 3/8" square drive
mm
8 10 11 12 13 14 16 17 19
Long sockets, 3/8" square drive
mm
8 10 11 12 13 14 16 17 19
Adaptor drive
inch
3/8-¼
Case dim. LxWxH
mm
265x142x50
Weight
kg
1.07
Pack
set
1
Impact sockets in set. With ½" square-drive
"Teng Tools" Set containing 16 1/2" drive impact sockets - regular and deep.
Art. no.
6880
-0101
Teng Tools
No
TT9116
Drive square
inch
½
Socket sizes. short sockets
mm
13 15 16 17 18 19 22 24
Socket sizes. deep sockets
mm
13 15 16 17 18 19 22 24
Case size LxWxH
mm
265x142x50
Weight
kg
2.2
Pack.
set
1
325
Hand tools
4
Impact sockets in set. With ¾" square-drive.
"Momento" Set of 14 impact sockets (17 dim.) and an extension bar. Hexagon openings. Blackened finish. Made of
Swedish quality steel. Supplied in a sturdy plastic case.
Art. no.
2298
-0205
Momento
No
PSS 22
Drive square
inch
¾
Sockets size*
mm
19* 21 22 23 24 26 27*28 29 30* 32 33 36 38
mm
180
Case size
mm
390×290×90
Weight
kg
9.1
Pack.
set
1
Impact socket set with ½" and ¾" square drive
"Momento" Sets with power sockets and extension bar. Made of Swedish quality steel. The sockets have hexagon
openings. Blackened finish. No 14409-0107 has thin walled sockets. Supplied in sturdy plastic case.
Art. no.
14409
-0107
-0206
-0305
Momento
No
TPSS 441
PSS 441
PSS 221
Drivesquare
inch
½
½
¾
Socket size
mm
8 9 10 11 12 13 14 15 10 11 12 13 14 15 16 19 21 22 23 24 26 27
16 17 18 19 20 21 22 17 18 19 21 22 24 27 28 29 30 32 33 36 38
23 24 27 30
30
41
Extension bar, length mm
125
125
175
Weight
kg
2.48
2.63
2.48
Pack.
sts
1
1
1
Impact sockets in set. With 3/8" square-drive
"Teng Tools" Set containing sockets with 6 point openings. Supplied in metal case.
Art. no.
7524
-0101
-0200
Teng Tools
No
9381
9121
No. of sockets
8
10
Drive square
inch
3/8
½
Sockets size
mm
8 10 11 13 14 16 17 19
10 11 13 14 17 19 21 22 24
Weight
kg
0.5
1.3
Pack.
set
1
1
Impact sockets. With ¾" square-drive
"Teng Tools" Set of ¾" impact sockets - 8 regular and 7 deep as per DIN-standard.
Art. no.
12208
-0104
Teng Tools
No
TTX9415
Drive
inch
¾
Short sockets, size
mm
19 24 27 28 30 32 34 36
Deep sockets, size
mm
19 24 27 3032 33 36
Case size LxWxH
mm
560x110x60
Weight
kg
9.0
Pack.
qty
1
Impact sockets. With 1" square-drive.
"Teng Tools" Made of chrome-molybdenum special steel. With 6 point openings. The sockets are equipped with a
Size
Standard-length
Deep
For
For
Teng Tools 9105
Teng Tools 9106R
retaining
retaining
Length
Art. no.
Pack.
Length
Art. no.
Pack.
ring
pin
mm
mm
11490
qty
mm
11492
qty
No
No
24
58
-0103
1
O93546
P90543
27
58
-0202
1
100
-0101
1
O93546
P90543
30
60
-0301
1
100
-0200
1
O93546
P90543
32
60
-0400
1
100
-0309
1
O93546
P90543
33
60
-0509
1
100
-0408
1
O93546
P90543
34
60
-0608
1
O93546
P90543
36
65
-0707
1
O93546
P90543
38
65
-0806
1
O93546
P90543
41
67
-0905
1
O93546
P90543
46
74
-1002
1
O93546
P90543
50
80
-1101
1
O93546
P90543
55
84
-1200
1
O93546
P90543
60
87
-1309
1
O93546
P90543
65
90
-1408
1
O93546
P90543
70
96
-1507
1
O93546
P90543
326
Please quote the
mm
75
80
85
90
95
Standard-length
Teng Tools 9105
Length
Art. no.
Pack.
mm
11490
qty
98
-1606
1
100
-1705
2
100
-1804
2
100
-1903
1
100
-2000
1
-
Deep
Teng Tools 9106R
Length
Art. no.
Pack.
mm
11492
qty
-
For
retaining
ring
No
O93546
O95775
O95775
O95775
O93546
For
retaining
pin
No
P90675
P90675
P90675
P90675
P96075
Hand tools
Size
4
Impact sockets. With 1" square-drive.
"Momento" Made of Swedish quality steel. With hexagon openings. Black ended finish.
Metric series
"Momento 9 L" Long
mm
5945
mm
qty
5946
mm
qty
22
-0056
59
1
23
-0106
59
1
(-0105)
100
1
24
-0155
59
1
-0154
100
1
27*
-0205
59
1
-0204
100
1
28
-0254
61
1
-0303
100
1
29
-0270
61
1
30*
-0353
61
1
-0352
100
1
32
-0403
61
1
-0402
100
1
33
-0452
61
1
-0451
100
1
34
-0502
61
1
-0501
100
1
35*
-0536
65
1
-2457
100
1
36
-0551
65
1
-0600
100
1
37
-0601
65
1
(-0709)
100
1
38*
-0627
65
1
-0758
100
1
41
-0650
70
1
-0808
100
1
42
-0700
70
1
(-0857)
100
1
43*
-2458
70
1
(-2804)
100
1
46*
-0759
75
1
-0907
115
1
47
-0809
75
1
-0956
115
1
50
-0858
80
1
-1004
115
1
52
-0908
80
1
(-1103)
115
1
55
-0957
83
1
-1202
125
1
56
-1005
83
1
(-1301)
125
1
60
-1054
83
1
-1400
125
1
65*
-1104
86
1
-1509
135
1
70*
-1153
86
1
-1608
135
1
75
-1203
86
1
80
-1252
90
1
(-1806)
140
1
85
-1302
90
1
90
-1351
100
1
95*
-1401
100
1
100
-1500
100
1
-
Metric series
Size
Size Art. no. Length Pack.
AF
mm
5945
mm
qty
15/16
23.8 (-2003) 59
1
1
25.4 -2052
59
1
11/16*
27
-0205
59
1
11/8
28.6 -2151
61
1
13/16*
30
-0353
61
1
1¼
31.8 -2201
61
1
15/16
33.3 -2250
61
1
13/8*
35
-0536
65
1
17/16
36.5 (-2300) 65
1
1½*
38
-0627
65
1
15/8
41.3 -2409
70
1
111/16* 43
-2458
70
1
113/16* 46
-0759
75
1
17/8
47.6 -2557
75
1
2
50.8 -2607
80
1
21/16
52.4 (-2656) 80
1
23/16
55.6 -2706
83
1
2¼
57.2 -2755
83
1
23/8
60.3 (-2805) 83
1
29/16*
65
-1104
86
1
25/8
66.7 -2854
86
1
23/4*
70
-1153
86
1
3
76.2 -2953
86
1
31/8
79.4 (-3001) 90
1
33/4*
95
-1401
100
1
-
"Momento 9 L" Long
5946
mm
qty
(-1905) 100
1
(-2002) 100
1
-0204
100
1
-2200
100
1
-0352
100
1
(-2309) 100
1
-2408
100
1
-2457
100
1
(-2507) 100
1
-0758
100
1
(-2705) 100
1
(-2804) 100
1
-0907
115
1
(-3000) 115
1
(-3109) 115
1
(-3208) 115
1
(-3307) 125
1
-3406
125
1
(-3505) 125
1
-1509
135
1
(-3604) 135
1
-1608
135
1
-
Ball jointed sockets
Ball-jointed socket. With ½" square-drive
"Momento" With hexagon openings. For screws and nuts that are difficult to access. The ball jointed socket can not
separate making it safe and flexible for the operator. The socket section can be set to the required angle (max. 30° for
power tools) for quick application. Blackened finish.
Size
Momento US-4 Standard length
Momento US-4L Long
Art. no.
Length
Pack.
Art. no.
Length
Pack.
mm
5197
mm
qty
5197
mm
qty
13
-0101
70
1
16
-0408
70
1
(-0903)
150
1
17
-0507
70
1
(-0952)
150
1
18
-0606
70
1
(-1000)
150
1
19
-0705
70
1
(-1109)
150
1
327
Hand tools
4
Torque sockets
With½" square-drive
Torque bar. With ½" square-drive.
Art. no.
Momento no
Size
For torque
Sockets o.d.
Length
Colour code
Pack.
4984
4mm
Nm
mm
mm
qty
"Momento" Torsion bar. For tightening wheel nuts using percussive nut runners. When the intended tightening
torque is reached the socket end stops while the drive end springs back between each stroke. Reduces the risk of
sheared wheel bolts or deformed rims. Suitable torque sockets for cars see the special information.
-0150
-0173
-0200
-0309
-0358
-0408
17-110 NmC
17-120 NmC
19-90 NmC
19-110 NmC
19-140 NmC
21-110 NmC
17
17
19
19
19
21
110
120
90
110
140
110
26.5
26.5
29
29
29
31
220
220
220
220
220
220
Red
Off-white
Yellow
Blue
Grey
Light brown
1
1
1
1
1
1
Accessory for power sockets
Holder for insert drives
Holder for insert drives
"Momento" Intended for percussive nut runners. With square hole suitable for the machines square drive and hexagonal drive for hexagonal inserts 6568.
Momento
ConnectHexagonal drive (for
Art. no.
Pack.
ion
hexagonal inserts)
No
inch
inch
6567
qty
H4-7/16
½
7/16
-0101
1
H4-7/8
½
7/8
-0150
1
H2-7/8
¾
7/8
-0309
1
H9-7/8
1
7/8
-0408
1
H9-1¼
1
1¼
-0507
1
H5-1¼
1½
1¼
(-0606)
1
H5-1¾
1½
1¾
(-0705)
1
Extension bars
Extension bar for power sockets
"Momento" Made of alloyed quality steel. Blackened finish.
Momento
Connection
Length
LockNo
inch
mm
type
EB 11-3
3/8
75
Pin
EB 11-6
3/8
150
Pin
EB 44-2
½
51
Pin
EB 44-5
½
125
Pin
EB 44-10
½
250
Pin
EB 22-4
¾
100
Hole
EB 22-7
¾
180
Hole
EB 22-10
¾
255
Hole
EB 22-13
¾
330
Hole
EB 99-4
1
100
Hole
EB 99-7
1
180
Hole
EB 99-10
1
255
Hole
EB 99-13
1
330
Hole
EB 99-15
1
380
Hole
EB 55-7
1½
180
Hole
EB 55-10
1½
255
Hole
EB 55-13
1½
330
Hole
EB 55-15
1½
380
Hole
328
Please quote the
Art. no.
5948
-0046
-0087
-0095
-0103
-0202
-0301
-0400
-0509
-0608
-0707
-0806
-0905
-1002
-1101
(-1200)
(-1309)
(-1408)
(-1507)
Pack.
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Insert drive for socket head cap screws
"Momento" For tightening screws and bolts with female hexagonal heads. The insert driver is locked in the holder by
a pointed screw with a V-shaped slot in the corner of the insert driver.
Size
For holder H4-7/16
For holders H4-7/8, H8-7/8, H2-7/8 and H9-7/8
(A)
with 7/16" hexagonal drive (B)
Momento
Over. lgth.
Art. no.
Pack.
Momento
Over. lgth.
Art. no.
Pack.
mm
No
mm
6568
qty
No
mm
6568
qty
6
7/16-6
28
-0100
1
8
7/16-8
28
-0209
1
10
7/16-10
28
-0308
1
12
7/16-12
28
-0407
1
7/8-12
44
-2106
1
14
7/16-14
28
-0506
1
7/8-14
44
-2205
1
17
7/8-17
44
-2304
1
19
7/8-19
44
-2403
1
22
7/8-22
44
-2502
1
24
7/8-24
44
-2601
1
Size
For holder H4-7/16
For holders H4-7/8, H8-7/8, H2-7/8 and H9-7/8
(A)
Momento
Over. lgth.
Art. no.
Pack.
Momento
Over. lgth.
Art. no.
Pack.
inch
No
mm
6568
qty
No
mm
6568
qty
¼
7/16-¼
28
-3104
1
5/16
7/16-5/16
28
-3203
1
3/8
7/16-3/8
28
-3302
1
½
7/16-½
28
-3401
1
7/8-½
44
(-5109)
1
9/16
7/8-9/16
44
(-5208)
1
5/8
7/8-5/8
44
-5307
1
¾
7/8-¾
44
-5406
1
13/16
7/8-13/16
44
-5505
1
7/8
7/8-7/8
44
-5604
1
Size
For holders H9-1¼ and H5-1¼
For holder H5-1¾
(A)
with 1¼" hexagonal drive (B)
with 1¾" hexagonal drive (B)
Momento
Over. lgth.
Art. no.
Pack.
Momento
Over. lgth.
Art. no.
Pack.
mm
No
mm
6568
qty
No
mm
6568
qty
27
1¼-27
60
-0159
1
30
1¼-30
60
-0258
1
32
1¼-32
60
-0357
1
33
1¼-33
60
(-0456)
1
36
1¾-36
80
(-0555)
1
41
1¾-41
80
(-0654)
1
50
1¾-50
80
(-0852)
1
Size
For holders H9-1¼ and H5-1¼
For holder H5-1¾
(A)
with 1¼" hexagonal drive (B)
with 1¾" hexagonal drive (B)
Momento
Over. lgth.
Art. no.
Pack.
Momento
Over. lgth.
Art. no.
Pack.
inch
No
mm
6568
qty
No
mm
6568
qty
1
1¼-1
60
(-6008)
1
11/16
1¼-11/16
60
(-6107)
1
11/8
1¼-11/8
60
(-6206)
1
1¼
1¼-1¼
60
(-6404)
1
13/8
1¾-13/8
80
(-6602)
1
1½
1¾-1½
80
(-6701)
1
15/8
1¾-15/8
80
(-6800)
1
Hand tools
Insert drives for socket head cap screws
4
Universal joints
Universal joint for power sockets
"Momento" Made of alloyed quality steel. For max. 30° angle for power tools. Blackened finish.
Momento
ConnectOverall
LockArt. no.
ion
length
No
inch
mm
type
5949
UK 00
¼
42
Pin
-0037
UK 11
3/8
60
Pin
-0052
UK 44
½
76
Pin
-0102
UK 22
¾
89
Hole
-0201
UK 99
1
112
Hole
-0300
UK 55
1½
162
Hole
(-0409)
UK 66
2½
280
Hole
(-0508)
Pack.
qty
1
1
1
1
1
1
1
329
Hand tools
4
Screw extractor - Puller
Adaptors
Adaptor for power sockets
"Momento" For increasing or decreasing square drives. Blackened finish. Exercise care with transitions to smaller
squares. As the nut runner can give too much torque for the smaller drive, no guarantee provided.
Momento
Drive
Drive
Overall
LockArt. no.
Pack.
length
type
square-int.
square-ext.
No
inch
inch
mm
5947
qty
PA 14
3/8
½
35
Pin
-0104
1
PA 41
½
3/8
39
Pin
-0203
1
PA 48
½
5/8
43
Pin
-0302
1
PA 42
½
¾
48
Pin
-0401
1
PA 84
5/8
½
49
Pin
-0500
1
PA 82
5/8
¾
54
Pin
-0609
1
PA 24
¾
½
57
Pin
-0708
1
PA 28
¾
5/8
57
Pin
-0807
1
PA 29
¾
1
65
Hole
-0906
1
PA 92
1
¾
75
Hole
-1003
1
PA 93
1
1¼
82
Hole
(-1102)
1
PA 95
1
1½
85
Hole
-1201
1
PA 39
1¼
1
84
Hole
-1300
1
PA 35
1¼
1½
95
Hole
(-1409)
1
PA 59
1½
1
100
Hole
-1508
1
PA 53
1½
1¼
108
Hole
(-1607)
1
PA 56
1½
2½
120
Hole
(-1706)
1
PA 65
2½
1½
130
Hole
-1805
1
Insert adaptors
Insert adaptor for impact sockets
"Momento" Compact insert adaptors that reduce the inset height to minimum. Suitable for power sockets. They are
stronger as they have bottoms instead of square through holes. The adaptor remains in the socket by means of a magnet.
Art. no.
2995
-0201
-0300
-0409
-0508
-0607
Momento-no IPA01
14
42
29
95
Int. square
inch
¼
3/8
½
¾
1
Ext. square
inch
3/8
½
¾
1
1½
Pack.
1
1
1
1
1
Art. no.
2995
-1001
Momento
No
IPAS:1
Contains no
IPA14 42 29
Int. square
inch
3/8 ½ ¾
Ext. square
inch
½¾1
Pack.
set
1
Nut splitters
Nut splitter
"Teng Tools" Set of two nut splitters. Easy splitting of nuts that have rusted fast without damaging the bolt or thread.
Art. no.
11695
-0106
Teng Tools
No
NS02
Opening
mm
5-20 14-27
For nuts
M
2.5-12 8-18
Pack.
sts
10
330
Please quote the
Screw extractor
"Ridgid" Type Lon Grip. Not tapered - same dimension on the attachment as on the tool. Once a hole is drilled in
the remaining screw end the screw extractor is knocked in. The flanges then press into the sides of the dill hole and the
screw can be removed using its own threads. The threads in the screw hole remain completely undamaged. There are
special centring sleeves available for the drilling stage for smaller dimensions.
Instructions:
1. A hole is drilled in the broken screw. 2. The hole is opened up to the right size. 3. The screw extractor is driven into
the hole. The hex nut is put on. The screw can now be screwed out using its own threads.
4. If the screw does not reach up to the edge of the material the centring sleeve is used.
Screw extractor
Art. no.
0502
-0102
-0201
-0300
-0409
Ridgid-no
Lon-Grip
1
2
3
4
For screw diameters inch
¼
5/16
3/8
7/16
Suitable drill
inch
1/8
3/16
¼
5/16
Max. depth
inch
1
1
1
1
Pack.
qty
6
1
1
6
Special drill
0502
-0904
-1001
-1100
-1209
Diameter
inch
1/8
3/16
¼
5/16
For screw extractor No
1
2
3
4
Pack.
qty
1
1
1
1
Art. no.
0502
-0508
-0607
-0706
-0805
Ridgid-no
Lon-Grip
5
6
7
8
For screw diameters inch
½-9/16
5/8
¾
7/8-1
Suitable drill
inch
11/32
7/16
½
5/8
Max. depth
inch
1
2
2
3
Pack.
qty
6
1
1
1
Special drill
0502
-1308
-1407
-1506
-1605
Diameter
inch
11/32
7/16
½
5/8
For screw extractor No
5
6
7
8
Pack.
qty
1
1
1
1
Centring sleeve
Art. no.
0502 -1704 -1803 -1902 -2009 -2108 -2207 -2306 -2405 -2504 -2603
Ridgid
No
921
1021 1121 1221 1321 1421 1521 1621 1721 1821
For screw extractor
No
1
2
3
Inside diameter (drill) inch
1/8
3/16
¼
Outside diameter
inch
9/32 5/16 11/32 3/8
13/32 7/16 15/32 ½
17/32 9/16
Total length
inch
13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16
Pack.
qty
1
1
1
1
1
1
1
1
1
1
Hand tools
Screw extractors
4
Screw extractor
"Ridgid" Complete set in plastic case, containing preceding "Lon Size"screw extractor with suitable drills and centring
sleeves.
Art. no.
0507
-0107
Ridgid
No
10
Number of screw extractors
5
Includes screw extractor
No
1, 2, 3, 4, 5
No. of centring sleeves
10
For screw
inch
¼-½
Pack.
set
1
Screw extractor
DIY-pack. With left-hand cut. For easy extraction of broken right-hand screws and bolts. Once a hole is drilled in the
remaining screw end, the left-hand screw extractor is inserted after which the screw can be removed using its own
threads. The threads in the screw hole remain completely undamaged. Even suitable for extracting pipe.
Art. no.
6261
-0100
-0209
-0308
-0407
No
1
2
3
4
Largest diam.
mm
3.6
4.9
6.5
8.8
Total length
mm
50
57
64
71
For screw
M
3-6
6-8
8-11
11-14
For screw
inch
1/8-¼
¼-5/16
5/16-7/16
7/16-9/16
Suitable drill
mm
1.8
2.6
3.7
5.5
Pack.
qty
1
1
1
1
Art. no.
6261
-0506
-0605
-0704
-0803
No
5
6
7
8
Largest diam.
mm
11
15
19
24
Total length
mm
78
85
92
100
For screw
M
14-18
18-45
24-33
33-45
For screw
inch
9/16-¾
¾-1
1-13/8
13/8-1¾
Suitable drill
mm
7
10.3
13.7
18.6
Pack.
qty
1
1
1
1
331
Screw extractor set
Hand tools
4
"Teng Tools" Set including 5 extractors with left-hand spiral. For extraction of broken screws and bolts.
Supplied in plastic case.
Art. no.
11693
-0108
Teng Tools
No
SE05
Number of screw extractors
ea.
5
For screw
M 6 - M 20
For drill bit
mm
2.8 3.5 4.0 6.35 7.5
Pack.
sts
10
Screw extractor
"Teng Tools" Sepatate screw extractors. For quick and easy way to remove broken screws, pipes, bolts and studs.
Square shank. Hardened to HRC 50-52.
Art. no.
15146
-0102
-0201
-0300
-0409
-0508
Teng Tools
No
SEL01S
SEL02S
SEL03S
SEL04S
SEL05S
For drill hole mm
3 (1/8")
4 (3/16")
5 (15/64")
7 (5/16")
9 (3/8")
Pack.
-
Stud bolt extractors
Stud bult extractor
"Teng Tools" For inserting and extracting stud bolts. One eccentric journalled, knurled wheel grips against an internal
fluting.
Art. no.
11697
-0104
Teng Tools
No
2300
For screw diameters
mm
5.5-19
Int. square-drive
inch
½
Pack.
qty
1
Stud bolt extractor
"Teng Tools" Reversible. Hexagon drive end and int. ½" square-drive.
Art. no
11696
-0105
-0204
Teng Tools
No
ST120506-C
ST12508-C
For screw diameters
mm
6
8
Drive square
inch
½
½
Pack.
qty
10
10
-0303
ST12510-C
10
½
10
-0402
ST12512-C
12
½
10
Dismantling set
Dismantling set
"Teng Tools" Set of 11 pieces containing 5 screw extractors, 4 stud bolt extractors as well as 2 nut splitters.
Art. no.
6934
-0107
Teng Tools
No
TTSN11
Contents:Screw extractor
inch
5/64 7/64 5/32 ¼ 19/64
Stud bolt extractor
mm
6 8 10 12
Nut splitter
mm
5-20 14-27
Case size LxWxH
mm
265x142x50
Weight
kg
1.3
Pack.
set
1
Pullers
Two arms
Puller, two arms (cable lug puller)
"Gedore" Cable lug puller Used to quickly dismantle pole lugs, small bearings, gears, etc. Very suitable for battery service and the repair of small electric motors. The arms are automatically clamp around the part to be pulled and cannot
slide off.
Art. no.
11449
-0105
-0204
Gedore-no
1.1202
01
Clamping width
mm
60
60
Clamping depth
mm
40
60
Spindle thread x length
M 10x1.5x60
M 10x1.5x80
Claw width
mm
10
10
Claw depth
mm
5
5
Claw thickness
mm
2
2
Max. clamping force
tonne
0.5
0.5
Weight
kg
0.1
0.2
Pack.
qty
1
1
332
Please quote the
"Gedore" With two flexible arms with double joints for internal grip. Used to quickly dismantle pole lugs, small bearings, etc. Suitable for battery service and the repair of small electric motors.
Art. no.
11450
-0101
Gedore
No
1.12/0
Clamping width
mm
70
Clamping depth
mm
80
kg
M 12x1.5x110
Spindle opening
mm
14
Claw width
mm
14
Claw depth
mm
8
Claw thickness
mm
2
Max. clamping force
tonne
1
Weight
kg
0.4
Pack.
qty
1
Hand tools
Puller, two arms
4
Puller, two arms
"Gedore" With two arms adjustable length. For internal and external grip. Extra strong design for dismantling belt
pulley, wheels and bearings, etc.
Art. no.
11414
-0106
-0205
-0304
-0403
-0502
-0601
Gedore-no
1.140
1
2
3
4
5
Clamping width
mm
90
130
200
250
280
420
Clamping depth
mm
100
140
200
260
390
480
M 12x1.5x110 M 14x1.5x140 M 18x1.5x200 G ½x250 G ½x250 G ½x350
Spindle opening
mm
14
17
19
24
24
24
Claw width
mm
14
18
25
32
32
32
Claw depth
mm
9
11
16
18
20
20
Claw thickness
mm
2
2
3
3.5
3.5
3.5
Max. clamping force
tonne
1
2
5
8
8
8
Weight
kg
0.5
0.8
2.1
4.3
5.1
5.8
Pack.
qty
1
1
1
1
1
1
Hydraulic spindle
3686
-2704
-2704
-2704
Gedore-no
1.06HSP 1
HSP 1
HSP 1
Pack.
qty
1
1
1
Puller, two arms
"Gedore" With pivoted arms. The design allows the arms to automatically clamp around the part to be pulled and
cannot slide off.
Art. no.
11426
-0102
-0201
-0300
Gedore-no
1.181
2
3
Clamping width
mm
110
160
200
Clamping depth
mm
110
140
160
M 14x1.5x163
M 18x1.5x215
G ½"x282
Spindle opening
mm
17
14
17
Claw width
mm
17
0.9
22
Claw depth
mm
18
20
22
Claw thickness
mm
5
6.5
7.5
Max. clamping force
tonne
2
3
5
Weight
kg
1.0
1.9
2.3
Pack.
qty
1
1
1
Puller - two arms
"Gedore" Very strong model for industry and agriculture, with clamping force up to 8 tonne. Can be supplemented
with a hydraulic spindle to facilitate work with large clamping forces.
Art. no.
11416
-0104
-0203
Gedore-no
1.161
2
Clamping width
mm
280
420
Clamping depth
mm
300
420
G 1" x 360
G 1" x 500
Spindle opening
mm
36
36
Claw width
mm
32
32
Claw depth
mm
19
22
Claw thickness
mm
3
3
Max. clamping force
tonne
8
8
Weight
kg
10.0
11.2
Pack.
qty
1
1
Hydraulic spindle
3686
-2902
-2902
Gedore-no
1.06HSP 3
HSP 3
Pack.
qty
1
1
Original spindle
3686
-2654
-2670
Gedore-no
1.
3306360
3306500
Pack.
qty
1
1
333
Hand tools
4
Puller, two arms
"Gedore" Very strong model for industry and agriculture, with clamping force up to 8 tonne. Equipped with hydraulic
spindle. Intended for large contracting plant, etc.
Art. no.
11417
-0103
-0202
Gedore-no
1.161-HSP 3
2-HSP-3
Clamping width
mm
280
420
Clamping depth
mm
190
310
Spindle type
HSP 3
HSP 3
Spindle opening
mm
36
36
Claw width
mm
32
32
Claw depth
mm
19
22
Claw thickness
mm
3
3
Max. clamping force
tonne
8
8
Weight
kg
9.3
11.3
Pack.
qty
1
1
Puller, two arms
"Gedore" For small bearings and the like. Adjuster screw presses the arms around the part to be dismantled and prevents the arms from becoming loose.
Art. no.
11428
-0100
-0209
-0308
Gedore-no
1.201
2
3
Clamping width
mm
70
90
150
Clamping depth
mm
85
100
140
M 18x1.5x115
M 18x1.5x130
G ½"x175
Spindle opening
mm
19
19
24
Claw width
mm
22
24
30
Claw depth
mm
12
15
18
Claw thickness
mm
3
3
3.5
Max. clamping force
tonne
5
5
7.5
Weight
kg
1.2
1.8
3.3
Pack.
qty
1
1
1
Hydraulic spindle
3686
-2704
Gedore-no
1.06HSP 1
Pack.
qty
1
Puller, two arms
"Gedore" Drop forged steel. The small space requirement of the arms allows parts that are extremely difficult to access to be dismantled. The arms on one side are end in a knife shaped and can be turned for internal or external griping.
An adjustable clamp presses the arms against the part to be pulled. Especially suitable for dismantling e.g. countersunk
axle bearings and bearings. A flexible puller with many setting possibilities.
Art. no.
11429
-0109
-0208
-0307
Gedore-no
1.221
2
3
Clamping width
mm
110
160
160
Clamping depth
mm
170
260
325
M 18x1.5x200
G ½"x350
G ½"x350
Spindle opening
mm
19
24
24
Claw width
mm
25
25
25
Claw depth
mm
14
14
14
Claw thickness
mm
3.5
3.5
3.5
Max. clamping force
tonne
5
7.5
7.5
Weight
kg
2.1
4.1
4.5
Pack.
qty
1
1
1
Puller, two arms
Mini-puller. For removing small bearings in cars, portable electric machines and domestic electric machines. The puller
arms can glide on the yoke as well as being equipped with two clamping screws that press the arms against the pulling
part. The claws on the arms are very thin 1 - 1.5 mm, which helps in confined areas.
Art. no.
10622
-0106
-0205
-0304
-0403
Orig. no
AB-0
AB-1
AB-2
AB-3
Clamping width (D)
mm
10-25
19-35
24-55
35-80
Clamping depth (H)
mm
40
50
100
160
Claw thickness (T)
mm
1.0
1.0
1.2
1.5
Spindle point diam. (d)
mm
4
6
8
12
Weight
kg
0.2
0.3
0.7
1.9
Pack.
qty
1
1
1
1
334
Please quote the
Puller with thin puller claws (2 mm) - helps in confined areas. Especially suitable for pulling gears. The arms glide on the
yoke, but can also be fixed in the required position with a screw. Hexagonal spindle head 17 mm for tightening with a
spanner.
Art. no.
10626
-0102
Orig. no
ABT-90
Clamping width (D)
mm
30-90
Clamping depth (H)
mm
88
Claw thickness (T)
mm
2.0
Spindle diam. (d)
mm
16
Weight
kg
0.5
Pack.
qty
1
Hand tools
Puller, two arms
4
Puller, two legged
"Teng Tools" The reliable model for fast revoval of pulleys, wheels, ball bearings, etc. Strong drop forged design. Reversible hooks permit use as an internal puller. Available extras are replaceable hooks for various clamping rreaches.
Spindle may be exchanged for hydraulic pressure spindle.
Art. no.
14393
-0105
-0204
-0303
-0402
-0501
Teng Tools
No
SP1410
SP1810
SP2215
SP2615
SP3320
Clamping width internal.
mm
90
130
160
200
250
Clamping width external.
mm
140
180
220
260
330
Max. reach
mm
100
100
150
150
200
Spindle thread
M14x1.5
M14x1.5
M20x2
M20x2
M26x2
Spindle length
mm
140
140
210
210
280
Spindle opening
mm
17
17
22
22
27
Claw depth
mm
12
12
18
18
28
Claw thickness
mm
3.0
3.0
3.5
3.5
6.5
Weight
kg
1.1
1.3
3.2
3.6
7.8
Pack.
qty
1
1
1
1
1
Puller, two arms
"Gedore" Drop forged steel. The arms can be slid on the yoke and be turned for internal or external gripping. The
claws on the arms are long and have a large application area, which eliminates damage to the workpiece.
In addition to the standard arms several different types of arms can be used, long arms, arm extensions, quick clamping
arms, arms with thin claws or long arms with thin claws. Some models can also be supplemented with hydraulic spindles.
Art. no.
3686
-0104
-0203
-0302
-0401
Gedore-no
1.061
1A
2
2A
mm
90
130
160
200
mm
140
180
220
260
Max. reach
mm
100
100
150
150
Spindle thread
M 14×1.5
M 14×1.5
G ½"
G ½"
Spindle length
mm
140
140
210
210
Spindle opening
mm
17
17
22
22
Claw width
mm
22
22
30
30
Claw depth
mm
12
12
18
18
Claw thickness
mm
3
3
3.5
3.5
Max. clamping force
tonne
3
3
5
5
Weight
kg
1.1
1.3
3.2
3.6
Pack.
qty
1
1
1
1
Art. no.
3686
-0500
-0609
-0708
-0757
Gedore-no
1.063
3A
4
5
mm
250
350
520
640
mm
330
420
600
715
Max. reach
mm
200
200
200
225
Spindle thread
G ¾"
G ¾"
G 1"
G 1"
Spindle length
mm
280
280
310
310
Spindle opening
mm
27
27
36
36
Claw width
mm
36
36
36
50
Claw depth
mm
28
28
28
33
Claw thickness
mm
6.5
6.5
6.5
10
Max. clamping force
tonne
7.5
7.5
10
15
Weight
kg
7.8
9.2
15.2
23.2
Pack.
qty
1
1
1
1
335
Hand tools
4
Puller with floor stand
"Teng Tools" Workshop rack for placement on the floor. The rack includes 5 pullers (one in each size). The pullers
are adjustable for internal and external pulling.
Art. no.
14474
-0107
Teng Tools
No
DIS-SP05
Includes pullers
No
SP1410, SP1810, SP 2215, SP 2615, SP 3320
Pack.
set
1
Puller - two arms
"Gedore" Puller 1.06/AS with 3 pairs of arms - lengths 100, 200 and 250 mm. The claws are extra thin - 3.6 mm - for
good access. Drop forged steel. The arms can be slid on the yoke and be turned for internal or external gripping.
Art. no.
6747
-0104
Gedore
No
1.06/AS
mm
130
mm
180
Clamping depth
mm
100, 200, 250
M 14x1.5x140
Spindle opening
mm
17
Claw width
mm
27
Claw depth
mm
6
Claw thickness
mm
3.6
Max. clamping force
tonne
2.5
Weight
kg
3.3
Pack.
qty
1
Puller, two arms
"Gedore" Spare parts/extra accessories for puller 1.06 and 1.06/AS.
For puller
No
1.06/1 1.06/1 A 1.06/2 1.06/2 A
For puller set
No
1.06/AS
Yoke
3686
-0815 -0823
-0831 -0849
Gedore-no
106/
103¹) 1A03¹, ²) 203¹) A203¹)
Pack.
qty
1
1
1
1
Spindle
3686
-2209
-2308
Gedore
No
1.1406140¹, ²)
1.2106210¹)
M 14x1.5x140
G ½"x210
Pack.
qty
1
1
Hydraulic spindle
3686
-2704
Gedore-no
1.06/
HSP 1
Max pressure
tonne
12
Pack.
qty
1
Compl arm
3686
-1201
-1300
Gedore-no
106/
A¹)
B¹)
Length
mm
100
150
Quantity
qty
1
1
Long arm
3686
-1508
-1607
Gedore-no
106/
AV
BV
Clamping depth
mm
200
300
Quantity
qty
1
1
Extra long arm
3686
Gedore-no
106/
Length
mm
Quantity
qty
Extra long arm
3686
Gedore-no
106/
Length
mm
Quantity
qty
Arm extension
3686
-3009
-3108
Gedore-no
106/
V100
V150
Length
mm
100
150
Quantity
qty
1
1
Quick clamping arm
3686
-3306
-3405
Gedore-no
106/
A-E
B-E
Length
mm
100
150
Quantity
qty
1
1
Arm with thin claw
3686
-3603
-3702
Gedore-no
106/
S100²)
S150
Length
mm
100
150
Quantity
qty
1
1
336
Please quote the
1.06/3 1.06/3 A
-0856 -0864
303¹) 3A03¹)
1
1
-2407
1.2606280¹)
G ¾"x280
1
-2803
HSP 2
12
1
-1409
C¹)
200
1
-1706
CV
300
1
-1904
DV
400
1
(-1946)
EV
500
1
-3207
V200
200
1
-3504
C-E
200
1
-
1.06/4 1.06/5
(-0872) 403¹) 503¹)
1
(-2506)
1.3306310¹)
G 1"x310
1
-2902
HSP 3
15
1
D¹)
225
D300
320
D400
420
D500
520
-
No
No
3686
106/
mm
qty
3686
106/
mm
qty
3686
106/
qty
3686
106/
qty
1.06/1 1.06/1 A
1.06/AS
-3801
S200²)
200
1
-4007
S250²)
250
1
-4205
S101
1
-4403
S101
1
1.06/2 1.06/2 A
-3900
S220
220
1
(-4106)
S300
300
1
-4304
S201
1
-
1.06/3 1.06/3 A
-
1.06/4
-
1.06/5
-
Hand tools
For puller
For puller set
Long arm with thin claw
Gedore-no
Length
Quantity
Gedore-no
Length
Quantity
Spare thin claw
Gedore-no
Quantity
Extra thin claw
Gedore-no
Quantity
4
Puller, two arms
"Gedore" Drop forged steel. The arms can be slid on the yoke and be turned for internal or external gripping. Quick
locking of the arms against the yoke with locking pin. The claws on the arms are long and have a large application area,
which eliminates damage to the workpiece.
Art. no.
11411
-0109
-0208
-0307
Gedore-no
1.041A
2A
3A
mm
130
200
350
Clamping width external. min-max
mm
70-170
110-260
150-420
Clamping depth
mm
100
150
200
M 14x1.5x140 G ½"x210
G ¾"x280
Spindle opening
mm
17
22
27
Claw width
mm
15
25
33
Claw depth
mm
22
30
36
Claw thickness
mm
3
4.5
6
Max. clamping force
tonne
3
5
7.5
Weight
kg
1.5
3.9
9.9
Pack.
qty
1
1
1
Spindle without reversible tips
3686
-2209
-2308
-2407
Gedore-no
1.
1406140
2106210
2606280
Pack.
qty
1
1
1
Puller, two arms
"Gedore" Drop forged steel. For gears, etc. With two reversible arms for internal and external gripping. The arms
have claws at one end and wide claws at the other. Model 1.10/2 has a 8 mm notch on the claw.
Art. no.
11447
-0107
-0206
Gedore-no
1.101
2
Clamping width
mm
90
160
Clamping depth
mm
80
130
M 14x1.5x125
M 18x1.5x170
Spindle opening
mm
17
19
Claw width
mm
17, 10
24, 20
Claw depth
mm
7
13
Claw thickness
mm
2
3
Max. clamping force
tonne
2
5
Weight
kg
0.7
2.0
Pack.
qty
1
1
Puller - set
"Gedore" Set containing one two arm yoke (1.06/103), one three arm yoke (1.07/103), three arms with thin claws and
quick clamping (arms length 100 mm). Supplied in a plastic case.
Art. no.
11716
-0101
Gedore
No
1.07 K-1-SE
Two arm yoke
No
1.06/103
Three arm yoke
No
1.07/103
Quick clamping arms
No
1.06/A-E
Pack.
sts
1
337
Hand tools
4
Three arms
Puller, three arms
"Gedore" With three flexible arms with double joints for internal grip. Used to quickly dismantle pole lugs, small bearings, etc. Suitable for battery service and the repair of small motors.
Art. no.
11413
-0107
-0206
Gedore-no
1.1302
01
Clamping width
mm
60
60
Clamping depth
mm
40
60
M 10x1.5x60
M 10x1.5x80
Claw width x depth x thickness
mm
10 x 5 x 2
10 x 5 x 2
Max. clamping force
tonne
0.75
0.75
Weight
kg
0.2
0.2
Pack.
qty
1
1
Puller, three arms
"Baldur" Drop forged steel. With three arms adjustable length.
Art. no.
11415 -0105
-0204
Gedore-no
1.15- 0
1
Clamping width
mm
90
130
Clamping depth
mm
100
140
M 12x1.5x110 M 14x1.5x140
Spindle opening
mm
14
17
Claw width
mm
14
18
Claw depth
mm
9
11
Claw thickness
mm
2
2
Max. clamping force
tonne 1.5
3
Weight
kg
0.7
1.1
Pack.
qty
1
1
Hydraulic spindle
3686 Gedore-no
1.06- Pack.
qty
-
-0303
2
200
210
M 18x1.5x200
19
25
16
3
7.5
2.9
1
-
-0402
3
250
260
G ½"x250
24
32
18
3.5
12
6.1
1
-2704
HSP 1
1
-0501
4
280
390
G ½"x250
24
32
20
3.5
12
7.1
1
-2704
HSP 1
1
-0600
5
420
480
G ½"x350
24
32
20
3.5
12
8.2
1
-2704
HSP 1
1
Puller, three arms
"Baldur" With pivoted arms. The design allows the arms to automatically clamp around the part to be pulled and cannot slide off.
Art. no.
11427
-0101
-0200
-0309
Gedore-no
1.191
2
3
Clamping width
mm
110
160
200
Clamping depth
mm
110
140
200
M 14x1.5x163
M 18x1.5x215
G ½"x282
Spindle opening
mm
17
19
22
Claw width
mm
17
21
22
Claw depth
mm
18
20
22
Claw thickness
mm
5
6.5
7.5
Max. clamping force
tonne
2
3
5
Weight
kg
1.3
2.5
4.0
Pack.
qty
1
1
1
Spare parts:
Spare arm
11427
-0408
-0507
-0606
Gedore-no
118103
203
303
Pack.
qty
1
1
1
Spindle
11427
-0705
-0804
-0903
Gedore-no
1181406163
1806215
2106282
Pack.
qty
1
1
1
Puller, three arms
"Gedore" Universal puller. all three arms are opened and closed simultaneously with a single action. In addition, they
are jointly spring-loaded, which locks the puller against e.g. belt pulleys. This significantly facilitates assembly on the object
to be removed.
Art. no.
13181
-0103
Gedore
No
1.09/1
Span width
mm
30-150
Clamping depth
mm
130
G 1/2 x 250
Spindle opening
mm
21
Claw width
mm
17
Claw depth
mm
12
Claw thickness
mm
3.5
Max. clamping force
tonne
6.5
Weight
kg
2.4
Pack.
set
1
338
Please quote the
"Gedore" Drop forged steel. Curved arms. With locating cone that automatically presses the arms more firmly around
the workpiece and prevents the arms from becoming loose.
Art. no.
11424
-0104
-0203
Gedore-no
1.171
2
Clamping width
mm
300
425
Clamping depth
mm
300
425
G 1"x360
G 1"x500
Spindle opening
mm
36
36
mm
32 x 19 x 3
32 x 22 x 3
Max. clamping force
tonne
12
12
Weight
kg
12.0
13.2
Pack.
qty
1
1
Spare parts:
Original spindle
3686
-2654
-2670
Gedore-no
13306360
3306500
Pack.
qty
1
1
Hydraulic spindle
3686
-2902
-2902
Gedore-no
1.06HSP 3
HSP 3
Pack.
qty
1
1
Hand tools
Puller, three arms
4
Puller, three arms
"Gedore" Drop forged steel. Curved arms. With locating cone that automatically presses the arms more firmly around
the workpiece and prevents the arms from becoming loose. Equipped with hydraulic spindle. Intended for the large
clamping forces associated with work on contracting plant, etc.
Art. no.
11425
(-0103)
(-0202)
Gedore-no
1.171 HSP 3
2 HSP 3
Clamping width
mm
300
425
Clamping depth
mm
190
315
Spindle type
HSP 3
HSP 3
Spindle opening
mm
36
36
mm
32 x 19 x 3
32 x 22 x 3
Max. clamping force
tonne
12
12
Weight
kg
11.0
13.0
Pack.
qty
1
1
Puller, three arms
"Gedore" Drop forged steel. The arms can be slid on the yoke and be turned for internal or external gripping. The
claws are long and have a large application area, which eliminates damage to the workpiece.
In addition to the standard arms several different types of arms can be used, long arms, arm extensions, quick clamping
arms, arms with thin hooks or long arms with thin hooks. Some models can also be supplemented with hydraulic spindles.
Art. no.
9053
-0106
-0205
-0304
-0403
-0502
Gedore-no
1.071
1A
2
2A
3
mm
90
130
160
200
250
mm
140
180
220
260
330
Clamping depth
mm
100
100
150
150
200
M 14x1.5x140 M 14x1.5x140 G ½"x210 G ½"x210 G ¾"x280
Spindle opening
mm
17
17
22
22
27
Claw width
mm
22
22
30
30
36
Claw depth
mm
12
12
18
18
28
Claw thickness
mm
3
3
5
3.5
6.5
Max. clamping force
tonne
3
3
3.5
5
7.5
Weight
kg
1.4
1.6
3.6
4.9
10
Pack.
qty
1
1
1
1
1
Puller, three arms
"Gedore" Puller 1.07/AS with 3 sets of arms - for clamping depths 100, 200 and 250 mm. The arms can be slid on the
yoke and turned for internal or external gripping. The claws are thin for good access.
Art. no.
6738
-0105
Gedore
No
1.07/AS
mm
130
mm
180
Clamping depth
mm
100, 200, 250
M 14x1.5x140
Spindle opening
mm
17
Claw width
mm
27
Claw depth
mm
6
Claw thickness
mm
3.6
Max. clamping force
tonne
3.0
Weight
kg
4.3
Pack.
qty
1
339
Hand tools
4
Puller, three arms
"Gedore" Universal puller with three radially adjustable arms. Exactly as on the standard model 3686- this puller is
adapted for all types of industrial applications such as dismantling large belt pulleys, flywheels and gears. Primarily for
work on electric motors. The three arms are individually adjustable at different angles in relation to one another, and
can also be locked at 120° to each other. The clamping depth can be extended by up to 490 mm by using the arms 1.07/
CV, 1.07/DV or 1.07/EV. The spindle can be replaced with a hydraulic spindle 1.06/HSP 3 to facilitate handling.
Art. no.
11412
(-0108)
Gedore
No
1.07/4
mm
450
mm
530
Clamping depth
mm
190
G 1"x360
Spindle opening
mm
36
mm
36 x 28 x 6.5
Max. clamping force
tonne
10
Weight
kg
19.0
Pack.
qty
1
Puller, three arms
"Gedore" Universal puller with three radially adjustable arms and hydraulic spindle. Exactly as on the standard model
3686- this puller is adapted for all types of industrial applications such as dismantling large belt pulleys, flywheels and
gears. Primarily for work on electric motors.
The three arms are individually adjustable at different angles in relation to one another, and can also be locked at 120°
to each other (can also be used for two-arm pulling if one leg is mounted off). The clamping depth can be extended by
up to 490 mm by using the arms 1.07/CV, 1.07/DV or 1.07/EV.
Art. no.
11446
-0108
Gedore
No
1.07/4 HSP 3
mm
450
mm
530
Clamping depth
mm
80
Spindle type
1.06/HSP 3
Spindle opening
mm
17
mm
36 x 28 x 6.5
Max. clamping force
tonne
10
Weight
kg
19.4
Pack.
qty
1
Puller, three arms
"Gedore" Spare parts/extra accessories for puller 1.07, 1.07/AS and 1.07/4-HSP 3.
For puller
No
1.07/1
1.07/1 A
1.07/2
1.07/2 A
For puller set
No
1.07/AS
Yoke
9053
(-1005) (-1104)
(-1203) (-1302)
Gedore-no
107/
103¹)
1A03¹, ²)
203¹)
A203¹)
Pack.
qty
1
1
1
1
Spindle
3686
-2209
-2308
Gedore-no
1.
1406140¹, ²)
2106210¹)
M 14x1.5x140
G ½"x210
Pack.
qty
1
1
Hydraulic spindle
3686
-2704
Gedore-no
1.06
HSP 1
Max pressure
tonne
12
Size
G ½"x350
Pack.
qty
1
Compl arm
3686
-1201
-1300
Gedore-no
106/
A¹)
B¹)
Length
mm
100
150
Quantity
qty
1
1
Long arm
3686
-1508
-1607
Gedore-no
106/
AV
BV
Clamping depth
mm
200
300
Quantity
qty
1
1
Long arm
3686
Gedore-no
106/
Length
mm
Quantity
qty
Long arm
3686
Gedore-no
106/
Length
mm
Quantity
qty
Arm extension
3686
-3009
-3108
Gedore-no
106/
V100
V150
Length
mm
100
150
Quantity
qty
1
1
340
Please quote the
1.07/3
(-1401)
A203¹)
1
-2407
2606280¹)
G ¾"x280
1
-2803
HSP 2
12
G ¾"x420
1
-1409
C¹, 3)
200
1
-1706
CV
300
1
-1904
DV
400
1
(-1946)
EV
500
1
-3207
V200
200
1
1.07/4
1.07/4-HSP 3
403¹, 3)
-2654
3306360¹)
G 1"x310
1
-2902
HSP 3³)
15
G 1"x465
1
No
No
3686
106/
qty
3686
106/
mm
qty
3686
106/
mm
qty
3686
106/
qty
3686
106/
qty
1.07/1
-3603
S100²)
1
-3801
S200²)
200
1
-4007
S250²)
250
1
-4205
S101
1
-4403
S101
1
1.07/1 A
1.07/AS
1.07/2
-3702
S150²)
1
-3900
S220
220
1
(-4106)
S300
300
1
-4304
S201
1
-
1.07/2 A
-
1.07/3
-
1.07/4
1.07/4-HSP 3
-
Hand tools
For puller
For puller set
Arm with thin claw
Gedore-no
Quantity
Gedore-no
Length
Quantity
Gedore-no
Length
Quantity
Spare thin claw
Gedore-no
Quantity
Spare thin claw
Gedore-no
Quantity
4
-
Puller, three arms
"Gedore" Drop forged steel. For gears, etc. With three reversible arms for internal and external gripping. The arms
have narrow claws at one end and wide claws at the other. Type 1.11/2 has a 8 mm notch in the claw.
Art. no.
11448
-0106
-0205
Gedore-no
1.111
2
Clamping width
mm
90
160
Clamping depth
mm
80
130
M 14x1.5x125
M 18x1.5x170
Spindle opening
mm
17
19
Claw width
mm
17, 10
24, 20
Claw depth
mm
7
13
Claw thickness
mm
2
3
Max. clamping force
tonne
3
7.5
Weight
kg
0.9
2.7
Pack.
qty
1
1
Combination pullers
Combination puller for 2 and 3-arm pulling
"Teng Tools" Three arm puller with special yoke for both 2 as well as 3-arm pulling.
Art. no.
13191
-0101
Teng Tools
No
SP11
Spread
mm
76-102
Max. reach
mm
89
Weight
kg
1.2
Pack.
qty
1
Combination puller for 2 and 3-arm pulling
"Teng Tools" Three arm puller with special yoke for both 2 as well as 3-arm pulling.
Art. no.
12842
-0106
Teng Tools
No
SP22
Clamping depth
mm
137
Pack.
qty
1
Wheel pullers
Wheel puller
"Gedore" Drop forged steel. For both cars and trucks. The arms are sliding and pivoted on the clamp plate and in
doing so are independent of the number of bolts are their placement.
Art. no.
11439
-0107
-0206
Gedore-no
1.603
5
No. of arms
3
5
For max. wheel hub diameter
mm
225
225
G ¾"x200
G ¾"x200
Weight
kg
4.0
5.0
Pack.
qty
1
1
Spare arm
11439
-0305
-0305
Gedore-no
160101
101
Pack.
qty
1
1
341
Hand tools
4
Shears - Pliers
Hydraulic spindle
Gedore-no
Pack.
3686
1.06qty
-2803
HSP 2
1
-2803
HSP 2
1
Universal pullers
Universal puller
"Gedore" Counterhold. For expanding sleeves no 1.30. Drop forged steel.
Art. no.
11433
-0103
Gedore-no
1.361
For exp. sleeves
1.301-5
Fits exp. sleeve with thread
M 10
Spindle opening
mm
27
Weight
kg
0.6
Pack.
qty
1
-0202
2
6-8
M 14x1.5
32
1.4
1
-0301
3
9
M 14x1.5
32
3.0
1
Hydraulic spindles
Hydraulic spindle
"Gedore" Oil filled hydraulic spindles. For controlled and safe pulling. Can be fitted in two as well as three arm pullers
with high clamping forces.
Art. no.
3686
-2704
-2803
-2902
Gedore-no
1.06HSP 1
HSP 2
HSP 3
Spindles thread length
mm
135
205
165
Spindle thread
G ½"
G ¾"
G 1"
Hydraulic parts length
mm
55
80
125
Stroke length
mm
12
12
12
Total length
mm
350
420
465
Opening
mm
12
12
17
Max. clamping force
tonne
12
12
15
Weight
kg
1.1
1.8
3.6
Pack.
qty
1
1
1
Hydraulic attachments
Puller - hydraulic attachment
"Gedore" Attachment presses. Used to increase the press force on mechanical pullers when dismantling components
that are difficult to remove. The attachment is inserted, with the cross spindle unscrewed, between the axle and puller
spindle. The hydraulics are activated by screwing in the cross spindle.
NOTE! Remember to offload the clamping pressure after use.
Art. no.
11438
-0108
-0207
Gedore-no
1.551
2
Height height
mm
75
90
Press force
tonne
8
15
Stroke length
mm
10
15
Weight
kg
0.7
1.3
Pack.
qty
1
1
Shears - Pliers
Shears
Household scissors
Household scissors
Household and sewing scissors with two round grips. Nickel-plated.
Art. no.
0956
Length
mm
Blade length
mm
Pack.
qty
-0103
200
90
12
Industrial scissors
Industrial scissors
For cutting polyester, fabric, cardboard, leather etc. Polished blades. Black handles.
Art. no.
0977
-0108
-0207
Length
mm
200
225
Blade length
mm
90
115
Pack.
qty
6
6
Ditto left
0977
-1007
Pack.
qty
1
342
Please quote the
-0306
250
140
6
-
Shears - Pliers
Leather scissors
For cutting cardboard, leather etc. Polished.
Art. no.
0691
Length
mm
Pack.
qty
-0103
200
6
Hand tools
Leather scissors
4
Tin snips
Tinmans shears
Plate shears
"Bessey / Erdi" Polished cutting edges. Open, plastic-coated handles. Right handed design.
No 102. Induction hardened to HRC 54-56. Green enamel.
No 202. Induction hardened to HRC 56-60. Blue-lacquered.
Length
Erdi no 102
Erdi no 202
Art. no.
Pack.
Art. no.
Pack.
mm
4276
qty
0694
qty
250
-0504
5
-0308
1
300
-0506
5
Punch shears
"Bessey / Erdi" Polished cutting edges. Open, plastic-coated handles. Straight/right.
No 107. Induction hardened HRC 54-56. Green enamelled.
No 207. Induction hardened HRC 56-60. Blue enamelled.
Length
Erdi no 107
Erdi no 207
Art. no.
Pack.
Art. no.
Pack.
mm
4277
qty
0697
qty
250
-0156
5
-0107
5
275
-0206
5
300
-0305
5
Tinmans shears
"Bessey / Erdi" For stainless steel sheet. Induction hardened to HRC 62. Combined, punch and roofing sheet shears.
Polished cutting edges. For up to 1.5 mm thick sheet. Red lacquered. Open, plastic-coated handles.
Art. no.
0704
-0108
-0207
Erdi
No
316
316
Design
Right
Left
Length
mm
280
280
Pack.
qty
5
5
Tinmans shears
"Stubai" Combined hand, punch, tinman and roofing sheet shears. Polished cutting edges. For sheet iron max 1.5 mm,
stainless steel sheet max. 1.0 mm Single joint. Open, plastic-coated handles.
Art. no.
0136
-0106
-0205
Stubai
No
2700
2705
Design
Right
Left
Length
mm
300
300
Pack.
qty
5
5
Tinmans shears
"Bessey / Erdi" Combined hand, punch, tinman and roofing sheet shears. Induction hardened to HRC 58-62. Black
cutting edges. For max. sheet iron 1.5 mm, max. stainless steel sheet 1.0 mm. Fully openable, plastic-coated handles.
Art. no.
0753
-0108
-0207
Erdi
No
216 B
216 B
Design
Right
Left
Colour
Green
Red
Length
mm
280
280
Pack.
qty
5
5
Tinmans shears
"Teng Tools" Compound action. Black plastic grips with hanging hole. With return spring and locking lever.
Art. no.
7416
-0052
-0102
-0201
Teng Tools
No
490
491
492
Design
Straight
Straight/Right
Straight/Left
Length
mm
250
250
250
Pack.
qty
6
6
6
343
Hand tools
4
Shears - Pliers
Tinmans shears
"Stanley" Tinmans shears with compound action. Slightly toothed blades. For up to 1.2 mm thick sheet. Plastic handles,
return spring and locking lever.
Art. no.
13434
-0108
-0207
-0306
Stanley
No
2-14-562
2-14-563
2-14-564
Design
Left
Straight
Right
Latex finish
red
yellow
green
Length
mm
250
250
250
Pack.
qty
6
6
6
Bolt cutters
Bolt cutters
"Teng Tools" Hardened central cutting edge (cutting angle 30°). Compound action. Equipped with centering screw
that gives increased safety when cutting. Tubular handles with plastic grips.
Teng Tools
Length
For max.
Bolt cutters
Jaws complete
material
Art. no.
Pack.
Art. no.
Pack.
(50 kp/mm²)
No
mm
mm
10190
qty
10190
sts
BC-414
379
6
-0108
1
-1007
1
BC-418
485
8
-0207
1
-1106
1
BC-424
652
10
-0306
1
-1205
1
BC-430
800
13
-0405
1
-1304
1
BC-436
958
16
-0504
1
-1403
1
Bolt cutters
"Ridgid" Type S. With centre cutter and compound action. For bolts, hard steel wire and piano wire. Steel tube handles with plastic grips.
Ridgid
Length
Length
For max.
Bolt cutters
Jaws complete
material
Art. no.
Pack.
Art. no.
Pack.
(50 kp/mm²)
no
inch
mm
mm
2415
qty
2415
set
S-14
14
379
9
-0104
1
(-0708)
1
S-18
18
485
11
-0203
1
(-0807)
1
S-24
24
652
13
-0302
1
-0906
1
S-30
30
800
15
-0401
1
-1003
1
S-36
36
958
17
-0500
1
-1102
1
S-42
42
1115
21
-0609
1
(-1201)
1
Wire cutters
Wire cutters
"HIT" For cutting wire and steel cable. Gives an even cut surface. Return spring. Plastic covered handles.
Art. no.
8697
-0100
HIT
No
HWC 6
Length
mm
190
For steel wire
mm
6
For stainless steel wire
mm
4
Pack.
qty
6
Wire cutters
For cutting wire and steel cable. Replaceable cutters. Gives an even cut surface. Enamelled tubular handles with plastic
grips.
Art. no.
6970
-0102
Length
mm
450
Cuts wire, max.
mm
12
Cuts stainless steel wire, max.
mm
10
Pack.
qty
1
Extra cutters, pair
6970
-0201
Pack.
p
1
Wire cutters
For cutting wire and steel cable. Replaceable cutters. Gives an even cut surface. Enamelled tubular handles with plastic
grips. Suitable wire tape 0738-0355.
Art. no.
2386
-0109
Length
mm
1066
Cuts steel wire
mm
20
Cuts stainless steel wire
mm
18
Pack.
qty
1
Extra cutters, pair
2386
-0208
Pack.
qty
1
344
Please quote the
Shears - Pliers
Cable joint pliers
Cobibe wire cutters and cable joint pliers. Fitted wityh two cutting edges for cutting wire. Three positions for compaction of cable joints of aluminium. With return spring and locking lever. Plastic covered handles.
Art. no.
10627
-0101
Orig. no
BWC-180
For cable joints
mm
0.45, 1.0, 1.5
Cuts wire, max.
mm
3
Length
mm
180
Pack.
qty
6
Hand tools
Cable joint pliers
4
Cable joint pliers
Cable joint pliers for compaction of cable joints of aluminium 2-5 mm. Also cuts wire, max. 5 mm. Available in two models - hand model or workbench model.
Hand model
4350
-0107
For cable joints
mm
2-5
Cuts wire, max.
mm
5
Length
mm
650
Pack.
qty
1
Workbench model
4350
-0206
Storage surface
mm
140×525
Pack.
qty
1
Cable joints
Cable joints
Made of aluminium. Suitable cable joint pliers 10627 and 4350. Price per package.
Art. no.
10630 -0106
-0205
-0304
Orig. no
OS-1A
OS-1B
OS-2A
For wire
mm 1.5
2.0
2.5
No. per
pack. 30
30
20
Pack.
qty 1
1
1
Art. no.
10630 -0502
-0601
-0700
Orig. no
OS-3A
OS-3B
OS-4A
For wire
mm 3.0
3.5
4.0
No. per
pack. 20
20
20
Pack.
qty 1
2
2
-0403
OS-2B
2.8
20
1
-0809
OS-5A
5.0
20
1
Burner pliers
Burner pliers
"Knipex" Single joint. Serrated jaws. Polished head.
Art. no.
6148
Knipex
No
Length
mm
Jaw width
mm
Pack.
qty
-0109
8411
200
3.5
6
Water pump pliers
Utility pliers
Utility pliers
"Teng Tools" Chrome vanadium steel. Serrated jaws with pipe grip. Plastic covered handles.
Art. no.
7417
-0051
-0101
Teng Tools
No
MB481-7
MB481-10
Length
mm
175
250
Size
mm
40
45
Pack.
qty
6
6
Utility pliers
"Knipex" Type Alligator. Robust chrome vanadium steel design. Serrated, alligator jaws with patented pipe grip.
Self-locking - when the pliers grip the object. Fitted with safety lip to protect fingers. Polished, with plastic covered
handles. With split slip joint
Art. no.
9119
-0058
-0108
-0207
Knipex no
8801180
250
300
Length
mm
180
250
300
Gap width
mm
25
32
48
Pack.
qty
6
6
6
Ditto bulk-pack
9119
-1205
(-1304)
Pack.
qty
6
6
345
Hand tools
4
Shears - Pliers
Utility pliers
Art. no.
Knipex no
Length
Size
Pack.
Ditto bulk pack
Pack.
With return spring
Knipex
Pack.
"Knipex" Type Cobra. with quick setting. Robust chrome vanadium steel design. Serrated, alligator jaws with
patented pipe grip. Self-locking - when the pliers are clamped around an object, they lock. Fitted with clamp protection. Plastic covered handles. With split slip joint
No 8701 without return spring. No 8701-250 has increased opening with 30 % and has 25 different setting positions.
No 8711 with return spring that sets itself according to the size of the work piece. Brochure on request 1336-9996.
1336
-0037
-0052
-0102
-0201
-0300
-0508
8701
8701
8701
8701
8701
8701
mm
150
180
250
300
400
560
mm
30
30
46
48
90
120
ea
6
6
6
6
1
1
1336
-1001
-1100
-1209
-1308
qty
6
6
6
1336
-0359
-0409
No
8711
8711
ea
6
6
-
Water pump pliers
"Knipex" Cobra. Long, narrow, extended jaws. With 15 quickly adjustable positions. Serrated jaws with pipe
grip. Self-locking - when the pliers are clamped around an object, they lock in position. Fitted with clamp protection.
Plastic covered handles.
Art. no.
13842
-0104
Knipex
No
8751
Length
mm
250
Max. pipe grip
mm
30
Max. parallel opening
mm
37
Max. grip depth
mm
42
Pack.
qty
6
Water pump pliers
"Knipex" Smart grip.Chrome vanadium steel. With automatic jaw locking when the handles are tightened. Serrated,
alligator jaws with patented pipe grip. Equipped with clamping guard. Plastic covered handles.
Art. no.
13843
-0103
Knipex
No
8501
Length
mm
250
Opening width
mm (inch)
10-35 (1/8-1½)
Pack.
qty
6
Ditto bulk pack
13843
-1002
Utility pliers
"Knipex" Plier wrench with parallel tensioning jaws and quick setting by pushing the setting button. Smooth
jaws suitable for careful assembly of fittings with treated surfaces. The jaw action makes it possible to work with the
plier wrench as a pair of pliers without changing the setting. The narrow head gives and assured grip even in confined
areas. Chrome vanadium steel. Plastic covered handles.
Art. no.
2717
-0059
-0109
-0208
Knipex-no
8603180
250
300
Length
mm
180
250
300
mm
0-35
0-42
0-60
Pack.
qty
6
6
6
Utility pliers
"Teng Tools" Heavy-duty model. Chrome vanadium steel. Serrated parallel jaws. Slip joint with curved guide slot.
Polished head. Plastic covered handles.
Art. no.
10593
-0051
-0077
-0101
Teng Tools
No
MB410
MB412
MB416
Length
mm
250
300
400
Size
mm
45
60
90
Pack.
qty
10
5
5
Pipe gripping pliers
Pipe gripping pliers
"Knipex" Chrome vanadium steel pliers, produced for the aviation industry, but also suitable for the installation industry as a pipe wrench for aluminium and light-metal installations. Equipped with serrated jaws. Adjustable in four different
positions. Plastic covered handles.
Art. no.
12058
-0105
Knipex
No
8113
Length
mm
230
Gap width
mm
25-65
Pack.
qty
1
Plastic jaws for ditto
12058
-0204
Pack.
qty
1
346
Please quote the
Shears - Pliers
Nut pliers
"Teng Tools" Single joint. Head angled 45° for good access. Serrated jaws. Black finish. Plastic covered handles.
Art. no.
0770
-0305
Teng Tools
No
MB488
Length
mm
180
Pack.
qty
6
Hand tools
Nut pliers
4
Nut pliers
"Channellock" Single joint. Heavy-duty model with serrated jaws and plastic covered handles.
No. 410 adjustable in 4 different positions.
Art. no.
12291
-0102
-0201
-0300
Channellock
No
307
410
414
Length
mm
175
240
350
Max. grip
mm
16
28
51
Pack.
qty
1
1
1
Combination pliers
Combination pliers
"Teng Tools" Single joint. With pipe grip and serrated grip surfaces. Plastic covered handles.
Art. no.
7419
-0034
-0075
-0083
Teng Tools
No
MB451-6
MB451-7
MB451-8
Length
mm
155
175
200
Cuts piano wire
mm
1.5
1.5
2.0
Max. cable dia.
mm
7
9
11
Pack.
qty
6
6
6
Combination pliers
"Knipex" Single joint. With pipe grip and serrated grip surfaces. Polished. Chrome vanadium steel. Plastic covered handles.
Art. no.
9361
-0053
-0103
-0202
-0301
Knipex no
0301140
160
180
200
Length
mm
140
160
180
200
Pack.
qty
6
6
6
6
Ditto bulk-pack
9361
-1002
(-1101)
(-1200)
Pack.
qty
6
6
6
Combination pliers
"Teng Tools" High leverage combination pliers. Single joint. With pipe grip and serrated grip surfaces. Plastic
covered handles.
Art. no.
7419
-0059
-0109
Teng Tools
No
MB 452-7
MB 452-8
Length
mm
175
200
Cuts piano wire
mm
2.0
2.2
Max. cable dia.
mm
11.5
13
Pack.
qty
6
6
Combination pliers
"Knipex" Robust - combination pliers. Single, eccentric joint. With cutters for all wire and cable. With pipe grip
and serrated grip surfaces. Of alloy steel for greater strength. Plastic covered handles.
Art. no.
0783
-0300
-0409
-0508
Knipex no
0201180
200
225
Length
mm
180
200
225
Cuts piano wire
mm
2.0
2.2
2.5
Max. cable diam.
mm
11.5
13
14
Max. cable
mm²
16
25
25
Pack.
qty
6
6
6
Ditto bulk-pack
0783
-1001
(-1100)
-1209
Pack.
qty
6
6
-
347
Hand tools
4
Shears - Pliers
Multi-purpose pliers
Multi-function pliers.
"Leatherman" Micra. Corrosion resistant unique mini tool. So small it can be fitted on a key ring or hung from a
chain around your neck. You hardly notice it before it is time to use it. The most valued function is perhaps the robust
spring-loaded scissors which are used by both anglers and climbers.
The following functions are included: knife, file/nail-cleaner slotted head screwdriver (medium), spring scissors, tweezers,
lanyard attachment/key ring, Phillips screwdriver, electronic screwdriver, bottle opener, rule (mm/inch). Supplied in gift
box.
Art. no.
10484
-0103
Leatherman
type
Micra 6165
Length, folded
mm
60
Length, unfolded
mm
110
Weight
g
48
Pack.
qty
1
"Leatherman" Fuse. A compact multi-purpose tool with lockable blade and effective scissors. Ergonomically designed handle with Zytel®-inserts that gives a comfortable and stable grip. Corrosion resistant.
The following functions are included: spring-loaded scissors, screwdrivers for slotted heads (2), cable strippers, clip-point
knife blade, powerful combination pliers with nose, pipe cut-out, cutters and power cutters, holder for wire, Phillips
cross-head screwdrivers no 1 and 2, electronics screwdriver, can and bottle openers, rule (19 cm/8?) and comfortable
locking mechanism that locks all blades in the extended position.
Supplied with leather case for attachment to belt. Available as an accessory is Leathermans new bits adapter (Removable
Bit Driver) which is suitable for Leatherman S2 bits as well as standard bits.
Art. no.
12761
-0103
Leatherman
type
Fuse 6205
Length, folded
mm
102
Length, unfolded
mm
160
Weight
g
170
Pack.
qty
1
"Leatherman" Core. Core is an updated version of Super Tool 200 and is designed for professional use. Made of
anti-corrosion 420 HC-steel. Core is also the first multi-purpose tool that Leatherman has equipped with slotted screwdrivers in the standard sizes that professionals use. New even larger combination pliers med three cutters. Larger ultra
sharp knife blades. The awl, which now features a wire opening, is stronger and sharper. All together Core has over 19
functions as standard and can be equipped med different accessories that make it even more versatile. You work faster
and safer and get more power with less effort. Supplied med leather case.
Accessories: Removable Bit Driver. Bit holder that takes standard bits (1/4") and Leathermans S2 double bits. Bit Kit.
Leathermans bit set with 21 double bits. Universal Tool Adapter. Bit holder that takes all standard ¼"bits.
Art. no.
13338
-0105
Leatherman
type
Core
Length, folded
mm
115
Length, unfolded
mm
180
Weight
g
307
Pack.
qty
1
"Leatherman" Crunch. Unique corrosion-resistant model designed for most professional users, but also for devoted home users.
The following functions are included: Universal pliers with adjustable, lockable jaws, drive for bits, all functions are lockable in the required position, serrated knife, wood and metal files, screwdrivers for slotted heads (3) Phillips screwdrivers no. 1 and 2, strippers, bottle opener, rule mm/inch, lanyard attachment as well as cutters. Supplied with leather case
for attachment to belt. Accessories: Leatherman S2 Bits.
Art. no.
10382
-0106
Leatherman
type
Crunch 6178
Length, folded
mm
100
Length, unfolded
mm
140
Weight
g
170
Pack.
qty
1
348
Please quote the
Shears - Pliers
"Leatherman" Wave. Legendary corrosion resistant multi-purpose tool - now with an updated design. Four lockable blades can be accessed in folded position. Rounded handle for extra comfort.
The following functions are included: powerful combination pliers with nose, pipe cut-out, cutters and power cutters,
blade with one-hand opening, straight and serrated knife blades, saw (wood/metal), file/diamond whetstone, 1 screwdriver with flat blade, effective spring-loaded scissors, cable strippers, can and bottle openers, large bit holder, small bit
holder, 2 double ended bits (Philips no 1 and 2 as well as combined Philips and straight screwdrivers for glasses, rule (19
cm/8"), holder for wire/chain. All blades are lockable. 25 year guarantee. Supplied with leather case for attachment to
belt.
Accessories: Removable clips/holder, removable securing eye, Leatherman Bit Kit with 21 extra double bits (42 functions). The bits are made of S2 tool steel (HRC59), which makes them 35% stronger than stainless steel. Zinc coating
makes the surface more resistant to corrosion.
Art. no.
12758
-0108
Leatherman
type
Wave 6207
Length, folded
mm
102
Length, unfolded
mm
160
Weight
g
240
Pack.
qty
1
Hand tools
4
"Leatherman" Surge. Surge is an updated version of the legendary Leatherman Wave - thats to say, a classic multipurpose tool made of corrosion resistant steel with a comfortable rounded handle, yet larger, stronger and if possible
even more well equipped than its famous little brother Wave. More than 20 functions. Four, one-hand action blades on
the outside of the tool; one straight Clip-point and a serrated knife blade and a new type of spring-loaded scissors. Also
includes a universal attachment for jigsaw blades. Internally there is a 5/16" professional screwdriver, awl/reamer with
wire opening, can/bottle opener, two bit holder and even stronger combination pliers with large cutting area and three
cutters. Surge is supplied with a leather case. 25 year guarantee.
The following double bits are included: Slotted screwdriver 3/16 " and Phillips no 1-2 as well as a small screwdriver and
Phillips screwdriver for glasses and other small screws.
Accessories: Removable Bit Driver. Bit holder that takes standard bits (¼") and Leathermans S2 double bits. Bit Kit.
Leathermans bit set with 21 double bits. Universal Tool Adapter. Bit holder that takes all standard ¼" bits.
Art. no.
13339
-0104
Leatherman
type
Surge
Length, folded
mm
115
Length, unfolded
mm
180
Weight
g
355
Pack.
qty
1
"Leatherman" ChargeTM Ti. What you immediately notice is the dark Titanium handle that protects the tool, the
softly rounded form and single-handed operation, lockable knife blade on the outside of the handle. When you look
closely you notice that the straight "Clip-point" knife blade is made of 154 CM steel (Chrome Molybden) which keeps
its edge three times longer than blades normally used in quality knives.
The following functions are included: Combination pliers with nose, pipe cut-out, cutters and power cutters, blade with
single-handed operation, straight (clip-point) and serrated knife blades, saw (wood/metal), diamond file, effective springloaded scissors, cable strippers, can and bottle openers, rule (19 cm/8"), holder for wire/chain, large bit holder, small bit
holder. All blades are lockable. 25 year guarantee.
Supplied in a leather case/holster which also holds a complete Bit Kit (sold separately). Also supplied are a removable
securing eye for those wishing to suspend the tool from a chain or wire and a removable holder/clip so that you can
clip/secure your tool in a pocket in the same way as a pen as well as 8 double ended Leatherman bits, of which one is a
minimal flat blade screwdriver and a Philips screwdriver for glasses and other very small screws. The other 7 are large
double bits that also fit standard holders. In total the bits give 16 extra functions.
Accessories: Leatherman Bit Kit with 21 double bits (42 functions). The bits are made of S2 tool steel (HRC59), which
makes them 35% stronger than stainless steel. Zinc coating makes the surface more resistant to corrosion.
Art. no.
12757
-0109
Leatherman
type
Charge Ti 6208
Length, folded
mm
102
Length, unfolded
mm
160
Weight
g
238
Pack.
qty
1
349
Hand tools
4
Shears - Pliers
"Leatherman" ChargeTM XTi. Here the tips of the pliers are equipped with an priming pliers/crimp tool for those
needing to prime explosives or to crimp sleeve around cables and shafts, etc. The serrated knife blade is fitted with a
cutting hook that makes it easy to safety belts, linoleum mats, etc. For the hunter it is a good gut opener. The following
functions are included: Combination pliers with nose, priming pliers/crimp tool, pipe cut-out, cutters and power cutters,
blade with single hand operation, straight clip-point knife blade of 154 CM steel (Chrome Molybden) that holds its edge
three times longer than blades normally used in quality knives, serrated knife blade with cutting hook/gut opener, diamond whetstone, cable strippers, can and bottle openers, rule (19 cm/8"), holder for wire/chain, 2 large and 1 small bit
holder. All blades are lockable. 25 year guarantee.
Supplied in a leather case/holster which also holds a complete Bit Kit (sold separately). Also supplied are a removable
securing eye for those wishing to suspend the tool from a chain or wire and a removable holder/clip so that you can
clip/secure your tool in a pocket in the same way as a pen as well as 9 double ended Leatherman bits, of which one is a
minimal flat blade screwdriver and a Philips screwdriver for glasses and other very small screws. The other 8 are large
double bits that also fit standard holders. In total the bits give 18 extra functions.
Accessories: Leatherman Bit Kit with 21 double bits (42 functions). The bits are made of S2 tool steel (HRC59), which
makes them 35% stronger than stainless steel. A zinc coating has been used to give them more resistance to corrosion.
Art. no.
12756
-0100
Leatherman
type
Charge XTi 6209
Length, folded
mm
102
Length, unfolded
mm
160
Weight
g
235
Pack.
qty
1
"Leatherman" Rust red. Take Charge AL and replace the scissors with a heavy duty cutting hook on the knife with
scalloped edge, add an addition double bit and you have a Charge ALX. Comfortable, hard anodised aluminium handle.
Clip-point knife blade in 154 CM steel. Three in-built bit holders. Heavy duty combination pliers.
Art. no.
14940
-0103
Leatherman
type
Charges ALX
Length, unfolded
mm
102
Length, unfolded
mm
160
Weight
g
238
Pack.
qty
1
Bit set for multi-function pliers
"Leatherman" Bit Kit. Fits all Leatherman pliers. Corrosion resistant kit contains 21 double ended Leatherman bits,
of which one is a small slotted head screwdriver and a Philips screwdriver for glasses and very small screws. The other
20 are large double bits that also fit standard holders, for example, Wave Tool Adaptor. In total the bits give 42 functions.
Standard bits are hexagonal. Leathermans Bits have a rectangular attachment. This makes them flatter and less bulky so
that the whole kit can fit in the small extra pocket in the case/holster for Wave, Charge Ti and Charge XTi. The bits are
made of S2 tool steel (HRC59), which makes them 35% stronger than stainless steel. A zinc coating has been used to
give the surface more resistance to corrosion. The kit is supplied in a nylon case that can be attached to a belt.
The following bits are included: Hex 1.5 and 2.0 mm, 2.5 and 3.0 mm, 4.0 and 5.0 mm, 6.0 mm and ¼", 7/32" and 3/16",
5/32" and 9/64", 1/8" and 7/64", 3/32" and 5/64", 1/16" and ½",
Robertson no 2 and 3, Robertson no 1 and Pozidrive no 3, Pozidrive no 1 and 2. Torx no 10 and 15, 20 and 25, 27 and
30. Phillips no 0 and 3 Phillips no 1 and 2.
Slotted screwdrivers 2.4 and 3.2 mm, 4.0 and 4.8 mm, 5.6 and 6.4 mm.
As well as a small screwdriver and Phillips screwdriver for glasses and other small screws.
Art. no.
12755
-0101
Leatherman
type
Bit Kit 6211
Pack.
qty
1
Bit set for multi-function pliers
"Leatherman" Removable Bit Driver. This flexible, corrosion resistant bits holder fits on all Leatherman tools
that have a Phillips screwdriver, i.e. also tools in the Juice-series. It is easily threaded over the Phillips screwdriver and
can take standard hexagonal standard bits as well as Leathermans own special bits. The bits holder is supplied in a kit,
which also contains 5 double ended Leatherman bits. Standard bits are hexagonal. Leathermans Bits have a rectangular
attachment. This makes them flatter and less bulky. The bits are made of S2 tool steel (HRC59), which makes them 35%
stronger than stainless steel. A zinc coating has been used to give the surface more resistance to corrosion. The following bits are included: Hex 4.0, 5.0, 6.0 mm and ¼". Torx no 10 and 15. Phillips no 0 and 3, Slotted screwdrivers 1.9 and
5.1 mm. The kit is supplied in a nylon case that can be attached to a belt.
Art. no.
12754
-0102
Leatherman
type
Removable Bit Driver 6210
Pack.
qty
1
"Leatherman" Squirt P4. Compact multi-purpose tool in corrosion resistant with grey anodised aluminium handle.
Functions: combination pliers with serrated jaws and pipe grip, straight knife blades cable cutter, 3 screwdrivers, single
and double cut file, opener and attachment for a chain or leather strap.
Art. no.
11718
-0109
Leatherman
type
Squirt P4 Grey
Length, folded
mm
57
Length, unfolded
mm
85
Weight
g
57
Pack.
qty
1
350
Please quote the
Shears - Pliers
"Leatherman" Cover for placement in belt. Suitable for Juice multi-purpose pliers. Of leather or plastic.
Art. no.
11478
-0109
-0208
Manufactured of
Leather
Plastic
Pack.
qty
1
1
Multi-function knives
Hand tools
Multi-function pliers
4
Multi-function knife
"Leatherman" e300. A modern folding knife with a 71 mm long blade in corrosion resistant 420HC steel with
straight ground edge. Concave blade profile makes the blade very easy to sharpen. Handle of glass fibre reinforced nylon
with rubber inserts for extra good grip. The opening mechanism is Leathermans Blade Launcher - a new, safe method
to open the blade without a spring. A patent pending snap-hook is concealed inside the handle until you need to make
the knife more easily accessible. The snap-hook also acts as a bottle opener.
e302. Folding knife with screwdrivers. 71 mm long blade of stainless 420HC steel with concave blade profile that makes
the blade very easy to sharpen and ideal for cutting e.g. meat and fish. The edge is straight ground. Handle of glass fibre
reinforced nylon with framework design - the weight is only 111 grams despite the fact that the knife, apart from the
knife blade, snap-hook and spring clamp, also includes two screwdrivers: one¼" straight slot screwdriver and Leathermans unique combi-crosspoint screwdriver Phillips no 1-2.
e306x. Folding knife with bit holder and patent pending snap-hook. Bit holder is concealed inside the handle. 71 mm
long knife blades in 154 cm steel. Straight blade profile makes the knife easy to sharpen and an all-round tool. You whittle
wooden whistles as elegantly as you fillet trout. The edge is straight ground. Handle of brushed aluminium with glass
fibre reinforced nylon inserts. Blade Launcher opening mechanism. Combined snap-hook/bottle opener. Supplied with
a nylon case and 3 double bits.
k500x. This is a modern hunting knife built in a classic fashion with a 79 mm long blade of stainless 154 cm steel. The
blade is straight ground and has a straight blade profile which makes it easy to sharpen. The grinding bevel is relatively
long which means the knife cuts with less friction - perfect for meat but also general a good all round knife. The handle
is comfortable and grip-friendly. Also easy to clean. A folding snap-hook/bottle opener is concealed in the handle.
k502x. A modern folding knife with Lockback mechanism. What makes 502 truly unique is partly the 79 mm long knife
blade in 154 cm steel (straight ground, straight blade profile), and partly the folding bit holder, which is concealed inside
the handle. The handle is made of glass fibre reinforced nylon with glass fibre reinforced nylon inserts. A snap-hook is
hidden inside the handle until you need to attach the knife, easily accessible on a harness, belt or on a rucksack. The
snap-hook also acts as a bottle opener.
Supplied with a leather case and 3 double bits. 25 year guarantee.
Art. no.
13337
-0106
-0205
-0304
-0403
-0502
Leatherman
type
e300
e302
e306x
k500x
k502x
Blade length
mm
71
71
71
79
79
Length, folded
mm
98
98
98
114
114
Length, unfolded
mm
170
170
170
193
193
Weight
g
86
111
118
132
204
Pack.
qty
1
1
1
1
1
Nail nippers
Nail nippers
"Knipex" Single joint. Polished. With plastic covered handles.
Art. no.
9362
-0102
-0201
Knipex-no
5001160
180
Length
mm
160
180
Jaw width
mm
16
19
Pack.
qty
6
6
Ditto bulk pack
93621
-001
Pack.
-
-0300
210
210
21
6
-100
-
-0409
250
250
23
6
-209
-
-0508
300
300
33
6
-
Lashing pliers
Lashing pliers
"Knipex" Single joint. For lashing and similar work. With plastic covered handles.
Art. no.
9238
-0104
-0203
Knipex no
9901220
250
Length
mm
220
250
Jaw width
mm
23
25
Pack.
qty
6
6
Ditto bulk-pack
9238
-1003
(-1102)
Pack.
qty
6
6
-0252
280
280
25
6
-
351
Hand tools
4
Shears - Pliers
Lashing pliers
"Knipex" Power pliers. For lashing and similar work. High cutting capacity with little effort. The design of the pliers
means that the handles are somewhat resilient which relieves pressure on the wrist and tendons. Polished head, plasticcovered handles.
Art. no.
2743
-0107
Knipex
No
9911
Length
mm
300
Jaw width
mm
24
Pack.
qty
6
End nippers
End nippers
"Knipex" Single joint. For hardened wire. Polished. Plastic covered handles.
Art. no.
0787
-0207
-0306
Knipex
6801160
180
Length
mm
160
180
Cuts hardened wire mm
2.3
2.5
Pack.
qty
6
6
Ditto bulk pack
07871
-007
-106
Pack.
-
-0405
200
200
2.8
6
-
End nippers
"Knipex" Single joint. Heavy-duty model. For piano wire. Polished. Plastic covered handles.
Art. no.
9120
-0105
-0147
Knipex
6701140
160
Length
mm
140
160
2.0
2.5
Cuts piano wire
mm
1.5
2.0
Pack.
qty
6
6
Ditto bulk pack
91201
-004
-103
Pack.
-
-0204
200
200
3.0
2.5
6
-202
-
Power cutters
Power cutters
"Knipex" Single joint. Specially hardened 12° angled cutters. Cutters hardened to HRC 64. For cutting piano wire and
thick, soft wire. Extremely high cutting capacity. Plastic covered handles.
Art. no.
3678
-0104
Knipex
No
6101
Length
mm
200
Cuts piano wire
mm
3
Pack.
qty
6
Ditto bulk pack
36781
-003
Pack.
-
Side cutters
Mini pliers
"Teng Tools" Mini pliers - cutters, snipe nose pliers and flat nose pliers. Single joint. Polished heads. With plastic covered handles.
Art. no.
9996
-0106
-0205
-0304
-0403
-0502
Teng Tools
No
MBM441
MBM449
MBM461
MBM463
MBM464
Type of pliers
Side cutters
End cutter
Snipe nose pli- Snipe nose pli- Flat nose pliers
ers
ers, angled
Length
mm
114
114
125
125
125
Pack.
qty
10
10
10
10
10
Side cutters
"Knipex" Single joint. Polished. With plastic covered handles.
Art. no.
0789
-0106
Knipex-no
7001125
Length
mm
125
1.5
Pack.
qty
6
Ditto bulk-pack
0789
-1005
Pack.
qty
6
352
Please quote the
-0205
140
140
1.8
6
-1104
6
-0304
160
160
2.0
6
-1203
6
Shears - Pliers
"Teng Tools" Single joint. Polished head. Equipped with plastic covered handles.
Type MB442 with hardened cutting edges for e.g. piano wire.
Art. no.
7421
-0154
-0105
-0170
Teng Tools
No
MB441-5
MB441-6
MB 442-6
Length
mm
125
150
155
Cuts piano wire
mm
0.5
0.5
2.0
Cuts steel wire
mm
1.5
1.5
2.5
Pack.
qty
12
6
6
-0188
MB442-7
185
2.0
2.5
6
Hand tools
Side cutters
4
-0204
MB442-8
200
2.5
4.0
6
Side cutters
"Teng Tools" Single joint. Polished head. With ergonomically designed two component handle sleeves. A display supplied with the order of the 6 Mega Bite side cutters MB441-6-T.
Art. no.
10974
-0100
-0209
Teng Tools
No
MB441-5T
MB441-6T
Length
mm
125
150
Cuts piano wire
mm
0.5
0.5
Cuts steel wire
mm
1.5
1.5
Pack.
qty
12
6
Side cutters
"Teng Tools" Single joint. Polished head. Hardened cutting edges for e.g. piano wire. With ergonomically designed
two component handle sleeves. A display supplied with the order of the 6 Mega Bite side cutters MB442-8 T.
Art. no.
10975
-0109
-0208
-0307
Teng Tools
No
MB442-6T
MB442-8T
MB442-8Tcurved head 15°
Length
mm
150
200
200
Cuts piano wire
mm
2.0
2.5
2.5
Cuts steel wire
mm
2.5
3.0
3.0
Pack.
qty
6
6
6
Side cutters
"Knipex" Single joint. Robust model for both hardened and soft wire. Polished. With plastic covered handles.
Art. no.
0791
-0102
-0201
-0300
-0367
-0409
"Knipex 7401" Length
mm
140
160
180
200
250
Cuts piano wire
mm
1.5
2.0
2.2
2.5
3.0
Pack.
qty
6
6
6
6
6
Ditto bulk-pack
0791
-1001
-1100
-1209
-1308
Pack.
qty
6
6
6
-
Side cutters
"Knipex" Model with cutting head angled 12° towards the handles for better accessibility. For both hardened and
soft wire. Single joint. Polished head. Plastic covered handles.
Art. no.
0418
-0105
Knipex
No
7421
Length
mm
200
Cuts piano wire
mm
2.5
Pack.
qty
6
Side cutters
"Knipex" With central cutting edge. For piano wire. Single joint. Red plastic-coated handles.
Art. no.
4983
-0102
Knipex
No
7491
Length
mm
250
Cuts piano wire
mm
3.5
Pack.
qty
6
Ditto bulk pack
4983
-1001
Pack.
-
Side cutters
"Knipex" Plastic cutters with side cutting edge. Single joint. Thin cutters. With spring. Suitable for plastic
and soft material such as lead and tin. With plastic covered handles.
Art. no.
6513
-0056
-0072
-0106
-0155
-0205
Knipex
No
7202
7201
7201
7201
7211
Jaws
Straight
Straight
Straight
Straight
45°
Length
mm
125
140
160
160
160
Pack.
qty
6
6
6
6
6
-0304
7221
90°
160
6
353
Hand tools
4
Shears - Pliers
Power cutters
Power cutters
Of stainless steel. With compound action. Centre cutter Cuts piano wire and copper cables. With return spring,
adjuster screw and locking device. Plastic covered handles.
Art. no.
4026
-0101
Length
mm
200
Cuts wire
mm
4.0
Pack.
qty
6
Power cutters
"Knipex" With compound action. Central cutting edge, induction hardened. Cuts piano wire and copper cable. Black
enamelled. Plastic covered handles. No 7101 without return spring, no 7111 with return spring, no 7112 with return
spring and locking device. No 7131 equipped with notch close to the joint to be able to cut wire up to 4.0 mm. This
permits maximal leverage.
Art. no.
5503
-0100
-0209
-0258
-0308
Knipex
No
7101
7111
7112
7131
With return spring
No
Yes
Yes
no
Length
mm
200
200
200
200
Cuts copper cables
mm
over 6
over 6
over 6
over 6
Cuts piano wire
mm
3.6
3.6
3.6
3.6
Cuts wire
mm
4.0
4.0
4.0
4.0
Pack.
qty
6
6
6
Ditto bulk pack
5503
-1009
-1108
-1207
Pack.
qty
6
-
Flat nose pliers
Flat nose pliers
"Knipex" Single joint. Long, straight jaws. Serrated grip surface. Polished. Plastic covered handles.
Art. no.
0795
-0108
-0207
-0306
"Knipex 3011"Length
mm
140
160
190
Nose length
mm
42
47
50
Pack.
qty
6
6
6
Ditto bulk pack
0795
(-1007)
-1106
Pack.
qty
6
6
-
Flat nose pliers
"Teng Tools" Single joint. Polished head. Long, straight jaws. Serrated grip surface. With ergonomically designed two
component handle sleeves.
Art. no.
10980
-0102
Teng Tools
No
MB464-6T
Length
mm
150
Length of nose
mm
55
Pack.
qty
6
Assembly pliers
Flat nose pliers, suitable for disabled persons
"Stirex" Suitable for disabled persons. Assembly pliers with long, fine serrated jaws. Soft, non-locking plastic handles.
Nr P-20 B. Single joint. Curved handles.
No P-1 B and P-2 B. Double joint. Curved handles.
Type ESD. Electrostatic. One plastic handle is of chrome and fitted with a built-in resistor (10 Mohm) that is connected between the front layer and chrome layer for effective and safe suppression of static electricity. In cases of contact the stray current through the resistor will be negligible (For example at 220 V around: 22 microampere.)
Type ESD/2. ESD protection. SP Approved 2001. Both plastic handles are of chrome and are fitted with resistors
(10 Mohm) that are connected between the front layer and chrome layer for effective and safe suppression of static
electricity. Antistatic treated spring band. In cases of contact the stray current through the resistor will be negligible. (At
220 V around: 44 microampere.)
Art. no.
5822
-0054
-0104
-0203
Stirex
No
P-20 B
P-1 B
P-2 B
Length
mm
155
155
160
Nose length
mm
19
22
21
Nose width
mm
1.5
1.5
2.5
Weight
g
17
25
25
Pack.
qty
10
10
10
Ditto ESD protected
5822
-1003
-1102
-1201
Stirex
No
P-20 B/ESD
P-1 B/ESD
P-2 B/ESD
Pack.
qty
10
10
10
Ditto ESD/2
5822
-2001
-2100
-2209
Stirex
No
P-20 B/ESD/2
P-1 B/ESD/2
P-2 B/ESD/2
Pack.
qty
1
1
1
354
Please quote the
Shears - Pliers
Flat nose pliers
"Knipex" Single joint. Long, straight jaws. Smooth grip. Polished head. Hardened. With plastic covered handles.
Art. no.
0232
-0109
Knipex
No
3111
Length
mm
160
Nose length
mm
55
Nose dimension
mm
2.5×1
Pack.
qty
6
Hand tools
Snipe nose pliers
4
Snipe nose pliers
"Knipex" Single joint. Long, straight jaws. Serrated grip surface. Polished head. With plastic covered handles.
Art. no.
5752
-0108
Knipex
No
3811
Length
mm
200
Nose length
mm
74
Pack.
qty
6
Snipe nose pliers
"Knipex" Single joint. Long, straight jaws. Serrated grip surface. Polished heads. With plastic covered handles.
Art. no.
0995
-0106
-0205
Knipex
3021140
160
Length
mm
140
160
Nose length
mm
42
50
Pack.
qty
6
6
Snipe nose pliers
"Knipex" Single joint. Long, curved jaws 45°. Smooth grip. Polished head. Hardened. With plastic covered handles.
Art. no.
0234
-0107
Knipex
No
3121
Length
mm
160
Nose length
mm
55
Nose dimension
mm
2.5×1
Pack.
qty
6
Snipe nose pliers with side cutters
"Teng Tools" Single joint. Polished head. Long, straight jaws. Serrated grip surface. Plastic covered handles.
MB463-8 as MB461 but with angled (45°) jaws.
Art. no.
7423
-0053
-0103
-0202
Teng Tools
No
MB461-6
MB461-8
MB463-8
Length
mm
150
200
200
Length of nose
mm
55
65
65
Pack.
qty
6
6
6
Flat nose pliers with side cutters
"Teng Tools" Single joint. Polished head. Long, straight jaws. Serrated grip surface. With ergonomically designed two
component handle sleeves.A display supplied with the order of the 6 Mega Bite flat nose pliers MB461-8 T.
Art. no.
10978
-0106
-0205
Teng Tools
No
MB461-6T
MB461-8T
Length
mm
150
200
Nose length
mm
55
65
Pack.
qty
6
6
Snipe nose pliers with side cutter
"Teng Tools" Single joint. Polished head. Long, 45° angled jaws. Serrated grip surface. With ergonomically designed
two component handle sleeves.
Art. no.
10979
-0105
Teng Tools
No
MB463-8T
Length
mm
200
Length of nose
mm
65
Pack.
qty
6
"Knipex" Single joint. Long jaws. Serrated grip surface. With side cutters. Polished. With plastic covered handles.
No 2501-140 S with cross-toothed gripping surfaces.
Art. no.
9123
-0102
-0201
Knipex-no
2501140
160
Length
mm
140
160
Nose length
mm
42
50
Cuts hardened wire
mm
2.0
2.0
Pack.
qty
6
6
355
Hand tools
4
Shears - Pliers
"Knipex" Single joint. Long jaws. Serrated grip surface. With side cutters. Polished. With plastic covered handles.
Art. no.
0797
-0304
Knipex
No
2611
Length
mm
200
Length of jaws
mm
73
Cuts hardened wire
mm
2.0
Pack.
qty
6
Ditto bulk-pack
0797
-1005
Pack.
qty
6
Flat nose pliers with side cutters, stainless steel
Stainless steel, for use in aggressive environments, commercial fishing etc. With single joint. Long, straight jaws. Serrated grip surface. Plastic covered handles.
The SRA-200 model also has two holes for forming leaded sinkers etc. and with serrated pipe grip.
Art. no.
3593
-0106
-0205
Type no
SRA-150
SRA-200
Length
mm
150
200
Length of jaws
mm
50
75
Cuts steel wire
mm
1.2
1.6
Pack.
qty
6
6
"Knipex" Single joint. Long, curved jaws 45°. Serrated grip surface. With side cutters. Polished. With plastic covered
handles.
Art. no.
6594
-0108
Knipex
No
2521
Length
mm
160
Length of jaws
mm
54
Cuts hardened wire
mm
0.5-1.6
Pack.
qty
6
Ditto bulk-pack
6594
-1007
Pack.
qty
6
"Knipex" Single joint. Long, curved jaws 45°. Serrated grip surface. With side cutters. Polished. With plastic covered
handles.
Art. no.
0799
-0203
Knipex
No
2621
Length
mm
200
Nose length
mm
73
Cuts haardened wire
mm
2.0
Pack.
qty
6
Ditto bulk-pack
0799
(-1003)
Pack.
qty
6
Flat nose pliers with side cutters, stainless steel
Stainless steel, for use in aggressive environments, commercial fishing etc. Long, curved jaws 45°. Serrated grip surface. Plastic covered handles.
The SRA-200 B model also has two holes for forming leaded sinkers etc. and with serrated pipe grip.
Art. no.
3594
-0105
-0204
Type no
SRA-150 B
SRA-200 B
Length
mm
150
200
Length of jaws
mm
50
75
Cuts steel wire
mm
1.2
1.6
Pack.
6
6
Round-nose pliers
Bending pliers
"Knipex" Single joint. Short, precision ground circular jaws. Polished. With plastic covered handles.
Art. no.
0802
-0109
Knipex
No
2201
Length
mm
140
Nose length
mm
28
Nose diameter
mm
2.5
Pack.
qty
6
Ditto bulk pack
0802
-1008
Pack.
-
356
Please quote the
Shears - Pliers
Hand tools
Round-nose pliers
4
"Knipex" Single joint. Long, rounded jaws. Polished. With plastic covered handles.
Art. no.
9125
-0100
Knipex
No
3031
Length
mm
160
Nose length
mm
41
Nose diameter
mm
2.5
Pack.
qty
6
Circlip pliers
For internal circlips
Circlip pliers for internal circlips
"Teng Tools" For internal circlips. Chrome vanadium steel. Polished head. Plastic covered handles. Return spring.
Art. no.
3496
-0054
-0104
-0153
-0179
-0203
-0302
Teng Tools No
MB470-5
MB470-7
MB470-9
MB471-5
MB471-7
MB471-9
For circlips mm
10-25
12-65
32-80
10-25
12-65
32-80
Model
straight
straight
straight
bent
bent
bent
Length
mm
130
175
225
130
175
225
Pack.
qty
10
10
10
10
10
10
"Knipex" For internal circlips. The shape of the tips means that the circlips are secure on the pliers when mounting/
dismounting. Chrome vanadium steel. Polished head. With plastic covered handles. Black.
For circlips
Straight
Bent
SgH
"Knipex
Length
Art. no.
Pack.
"Knipex
Length
Art. no.
Pack.
mm
4411"mm
9126
qty
4421"mm
9126
qty
8-15
J0
140
-0059
6
J 01
130
-0455
6
12-25
J1
140
-0109
6
J 11
130
-0505
6
19-60
J2
180
-0208
6
J 21
170
-0604
6
40-100
J3
225
-0307
6
J 31
215
-0703
6
85-165
J4
320
-0406
6
J 41
300
-0802
6
"Knipex" For internal circlips. Chrome vanadium steel. Tips of spring steel- securely fitted to the pliers. Safe-grip, nonslip handles.
For circlips
Straight
Curved
SgH
"Knipex
Length
Art. no.
Pack.
"Knipex
Length
Art. no.
mm
4811"mm
11899
qty
4821"mm
11899
8-13
J0
140
-0100
1
J 01
130
-0605
12-25
J1
140
-0209
1
J 11
130
-0704
19-60
J2
180
-0308
1
J 21
165
-0803
40-100
J3
225
-0407
1
J 31
210
-0902
85-140
J4
320
-0506
1
J 41
305
-1009
Bulk pack
For circlips
Straight
Curved
SgH
"Knipex
Length
Art. no.
Pack.
"Knipex
Length
Art. no.
mm
4811"mm
11899
4821"mm
11899
8-13
J0
140
-2007
J 01
130
-2502
12-25
J1
140
-2106
J 11
130
-2601
19-60
J2
180
-2205
J 21
165
-2700
40-100
J3
225
-2304
J 31
210
-2809
85-140
J4
320
-2403
J 41
305
-2908
Pack.
qty
1
1
1
1
1
Pack.
-
For external circlips
Circlip pliers for external circlips
"Teng Tools" For external circlips. Chrome vanadium steel. Polished head. Plastic covered handles. Return spring.
Art. no.
3502
-0056
-0106
-0155
-0171
-0205
-0304
Teng Tools
No
MB472-5
MB472-7
MB472-9
MB473-5
MB473-7
MB473-9
For circlips SgA
mm
10-25
10-40
32-80
10-25
10-40
32-80
Model
straight
straight
straight
bent
bent
bent
Length
mm
130
175
225
130
175
225
Pack.
qty
10
10
10
10
10
10
357
Hand tools
4
Shears - Pliers
"Knipex" For external circlips. The shape of the tips means that the circlips are secure on the pliers when mounting/
dismounting. Chrome vanadium steel. (No A 4 and A 41 of alloy steel.) With return spring. Plastic covered handles.
For circlips
SgA
mm
3-10
10-25
19-60
40-100
85-140
"Knipex
4611"A0
A1
A2
A3
A4
Straight
Length
Art. no.
mm
9127
140
-0108
140
-0207
180
-0306
210
-0405
315
-0504
Bent
Pack.
qty
6
6
6
6
6
"Knipex
4621"A 01
A 11
A 21
A 31
A 41
Length
mm
125
125
170
200
290
Art. no.
9127
-0603
-0702
-0801
-0900
-1007
Pack.
qty
6
6
6
6
6
"Knipex" For external circlips. Chrome vanadium steel. Tips of spring steel- securely fitted to the pliers. With integrated return spring. Safe-grip, non-slip handles.
For circlips
SgA
mm
3-10
10-25
19-60
40-100
85-140
Bulk pack
For circlips
SgA
mm
3-10
10-25
19-60
40-100
85-140
"Knipex
4911"A0
A1
A2
A3
A4
Straight
Length
Art. no.
mm
11901
140
-0106
140
-0205
180
-0304
225
-0403
320
-0502
"Knipex
4911"A0
A1
A2
A3
A4
Straight
Length
Art. no.
mm
11901
140
-2003
140
-2102
180
-2201
225
-2300
320
-2409
Pack.
qty
1
1
1
1
1
Pack.
-
"Knipex
4921"A 01
A 11
A 21
A 31
A 41
"Knipex
4921"A 01
A 11
A 21
A 31
A 41
Length
mm
130
130
165
210
305
Length
mm
130
130
165
210
305
Curved
Art. no.
11901
-0601
-0700
-0809
-0908
-1005
Curved
Art. no.
11901
-2508
-2607
-2706
-2805
-2904
Pack.
qty
1
1
1
1
1
Pack.
-
Circlip pliers
For circlips
SgA
mm
3-10
"Knipex" For external circlips. With adjustable opening limiter. Tips of spring steel - securely fitted to the pliers.
With integrated return spring. Play-free screw joint. Safe-grip, non-slip handles.
Straight
Curved
Knipex
Length
Art. no.
Pack.
Knipex
Length
Art. no.
Pack.
4931mm
13845
qty
4941mm
13845
qty
A0
140
-0101
6
A01
130
-0200
6
For internal and external circlips
Circlip pliers for internal and external circlips
"Teng Tools" For internal and external circlips. Four interchangeable heads - give eight different combinations. The
tips are slightly magnetic. Return spring. Plastic covered handles.
Art. no.
7415
-0103
Teng Tools
No
480
For circlips
mm
10-50
Length
mm
150
Pack.
qty
5
Circlip pliers for internal and external circlips
"Knipex" Set of four straight circlip pliers for internal and external circlips. Pliers of chrome vanadium steelchrome
vanadium steel. Tips of spring steel- securely fitted to the pliers. Safe-grip, non-slip handles.
Supplied on a reel.
Art. no.
12102
-0101
Knipex
No
00 19 57
Circlip pliers for int. circlips 12-35 mm
No
4811-J 1
Circlip pliers for int. circlips 19-60 mm
No
4811-J 2
Circlip pliers for ext. circlips 10-25 mm
No
4911-A 1
Circlip pliers for ext. circlips 19-60 mm
No
4911-A 2
Pack.
qty
1
358
Please quote the
Shears - Pliers
Circlip pliers
"Knipex" Pliers with special tips suitable for circlips 12 mm and above. Polished, black enamelled head. Plastic covered
handles. Return spring.
Art. no.
3306
-0104
Knipex
No
4521
Length
mm
200
For circlips
mm
Øgreater than 12
Pack.
qty
6
Hand tools
Installation pliers
4
Lock washer pliers
"Knipex" Pliers with specially shaped tips for "gripping rings". Polished head. Plastic covered handles. Return spring.
Art. no.
3294
-0108
-0207
-0306
Knipex-no
4611G1
G2
G3
For gripping rings
mm
4-7
5-13
14-19
Length
mm
140
140
140
Pack.
qty
6
6
6
Automobile tools
Hose clamps in sets
Hose clamps in sets
non conductive safety. 3 sizes that fit most hose sizes.
Art. no.
11842
-0108
Teng Tools
No
TTHC03
Number of clamps
3
For hose diameter
inch
¼-¾, ¼-1¼, ¾-2¼
Case size LxWxH
mm
265x142x50
Weight
kg
0.49
Pack.
qty
1
Pinchoff pliers
Pinchoff pliers
non conductive safety. 3 sizes to fit all types of hose.
Art. no
11773
-0101
-0200
-0309
Teng Tools
No
AT080
AT085
AT090
Length
mm
155
185
250
Jaw length
mm
20
38
75
For hose diameter
inch
¼-¾
¼-1¼
¾-2¼
Pack
qty
5
5
5
Cutting pliers
Cutting pliers for stainless hose clamps
"Teng Tools" Pliers for cutting stainless hose clamps without damaging the hose. Hardened jaws.
Art. no.
11805
-0103
Teng Tools
No
AT130
Length
mm
220
Pack.
qty
5
Hook wrench
Hook wrench for adjusting rear chock absorbers on motorbikes
"Teng Tools" Hook wrench specially designed for adjusting rear shock absorbers on motorbikes.
Art. no.
13222
-0104
Teng Tools
No
HP301
For diameters
mm
65-70
Pack
qty
10
359
Hand tools
4
Shears - Pliers
Oil plug set
Oil plug set
"Teng Tools" Set including 6 double plug sockets with pull rod suitable for oil plugs in engines and gearboxes. Supplied
in plastic case.
Art. no.
6257
-0106
Teng Tools
No
DP12
Size of oil plug sockets
hex 5/16x3/8 hex, square 11x12 hex, hex 17x½ hex, square
8x3/8 squarehex 8x10 hex, square 13x14 hex
Pack.
set
1
Hook set for O-rings
Hook set for O-rings
"Teng Tools" Set consisting of 125 mm long aluminium handle with magnet and four different hooks with knurled
shaft. The hooks are fitted on the aluminium handle when assembling and dismantling O-rings, gaskets and springs.A display is supplied with the order of 5 hook sets for O-rings.
Art. no.
4002
-0109
Teng Tools
No
AT149
Pack.
qty
5
Gasket scraper
Gasket scraper
"Teng Tools" With chrome vanadium steel blade for removal of gaskets when changing cylinder heads etc. Heavyduty plastic handle with hole for hanging.
Art. no.
0313
-0101
Teng Tools
No
MD-SCR
Width
mm
22
Total length
mm
245
Pack.
qty
10
Hydraulic jacks
Bottle jack
"Luna" Stable jacks with flat base plate. Developed for professional workshop use. Equipped with safety valve that prevents overloading. With relief valve that gives safe lowering of the load. Pump piston and parts exposed to large strain
are hardened. Sizes 10, 15 and 30 tonne equipped with transport handle.
Art. no.
20796
-0105
-0204
-0303
-0402
-0501
-0600
Luna
No
MP2 T
MP2 T
MP2 T
MP2 T
MP2 T
MP2 T
Max. load
ton
2
4
6
10
15
30
Min height
mm
158
195
200
240
250
285
Hydraulic lift height
mm
90
125
125
160
160
180
Adjuster screw
mm
60
60
80
80
80
Max. overall height
mm
308
380
405
480
490
465
Lever length
mm
300
300
300
300
300
300
Weight
kg
2.6
3.7
4.7
7.7
10.6
18.2
Pack.
qty
1
1
1
1
1
1
Trolly jack
"Luna" In light performance. Built in aluminium and steel mixed. Extremely easy operated. High performance swivelling
wheels of nylon. Developed for professional workshop applications. Equipped with a security valve to prevent overloading and a screw and nut container. Lowering of the jack lifting arm is done by means of the pump arm by turn it clockwise.
The pump arm handle grip is knurled. All parts under pressure are hardened.
Art. no.
20824
-0101
Luna
No
2.8T-HAL
Max. load
ton
2.8
Hydraulic lifting height
mm
410
Max. saddle height
mm
510
Min. saddle height
mm
100
Body height
mm
160
Total length
mm
770
Weight
kg
40
Pack.
qty
1
360
Please quote the
Shears - Pliers
Creeper
"Luna" Creeper of durable plastic. Light model with handle grip for easy transportation. Comfortable filled pillow.
Arched surface for comfortable lie position. With six ball bearing swivelling wheels. Equipped with compartments for
screws and nuts on both left and right side.
Art. no.
20454
-0108
Length x width
mm
1005x475
Height of creeper - lowest/highest point
mm
50/115
Wheel diameter
mm
75
Max. loading weight
kg
130
Weight
kg
4.8
Pack.
qty
1
Hand tools
Creepers
4
Creeper
"Luna" Folding model. Can easily be adjusted into a transportable wheel chair. Takes less space in workshop. Comfortable filled cushions. Steel frame. With seven ball bearing swivelling wheels.
Art. no.
20786
-0107
Length x width
mm
1020x400
Height of creeper
mm
105
Height of chair
mm
470
Wheel diameter
mm
60
Max. loading weight
kg
110
Weight
kg
6.7
Pack.
qty
1
Flashlight
LED-flashlight
"Teng Tools" LED-flashlight with non slip rubber handle, click swich on/off, waterproof and insulated with 80.000
hour life LED bulb. Suitable batteries 2 pcs type AA.
Art. no.
13239
-0105
Teng Tools
No
585
Pack.
qty
10
Punch pliers
For cardboard, leather, etc.
Punch pliers for cardboard, leather etc.
"Knipex" Of hardened sheet metal. Revolver with six drive punches. Fitted with return spring and locking device. Red
lacquered.
Art. no.
2557
-0102
Knipex
No
9070
Length
mm
220
Hole diameters
mm
2 2.5 3 3.5 4 4.5
Pack.
qty
6
Ditto bulk pack
2557
-1001
Pack.
-
Sealing pliers
For plastic seals
Sealing pliers for plastic seals
Not engraved (can be engraved by goldsmith or similar craftsman). With excenter punching compound action and interchangeable dies. Nickel plated. Plastic covered handles.
Length
For
Pliers
Spare dies
seals
Art. no.
Pack.
Art. no.
Pack.
mm
mm
0906
qty
0906
qty
125
8
-0104
1
-0500
1
175
10
-0203
1
-0609
1
Sealing pliers for plastic seals
Not engraved (can be engraved by goldsmith or similar craftsman) With two interchangeable dies. With side cutters for
cutting of seal wire. Chromium-plated.
Art. no.
3485
-0107
Orig. no
SP 71
Length
mm
160
Pack.
qty
1
Separate die
3485
-0206
Pack.
qty
1
361
Hand tools
4
Shears - Pliers
Plastic seals
Plastic seals
Smooth.
Art. no.
Diameter
No. per
Pack.
0908
mm
pack.
mil
-0300
8
1000
1
-0409
10
1000
1
Seal wire
Seal wire
Galvanised. Consists of straight centre wire covered by spun guard wire. In rolls of 1 kg = approx 250 m.
Art. no.
5480
-0107
Weight per roll
kg
1
Straight- × spun wwire diam.
mm
0.5×0.3
Pack.
qty
1
Wire locking pliers
Wire locking pliers
"Teng Tools" Used to lock nuts, seals or the like with the help of wire. With side cutters and with small head for
good accessibility. The pliers grip the wire and the rear knot and then twist the wire. Black.
Art. no.
13149
-0105
Teng Tools
No
AT605
Length
mm
150
Pack.
qty
10
Blacksmiths tongs
Blacksmiths tongs
"Habero" With flat jaws. Black.
Art. no.
Habero 230Length
Jaw width
Pack.
0924
mm
mm
qty
-0102
500
20
1
0925
mm
mm
qty
-0101
500
25
1
Blacksmiths tongs
"Habero" With round jaws. Black.
Art. no.
Habero 231Length
Jaw width
Pack.
Blacksmiths tongs
"Habero" With multi purpose jaws for both round and flat workpieces. Black.
Art. no.
0926
-0100
Habero 233Length
mm
500
Jaw width
mm
28
Pack.
qty
1
Universal pliers
Standard
Universal pliers
"Teng Tools" Self-locking. Serrated, straight, adjustable jaws. With release lever. Nickel-plated.
Art. no.
10192
-0106
-0205
Teng Tools
No
401F-10
401F-12
Length
mm
250
300
Size
mm
0-45
0-52
Pack.
qty
1
5
Universal pliers
"Luna" Powder coated, self-locking, with single non-pinch release lever. Long bent, serrated jaws for all round work.
Art. no.
21073 -0107
-0206
-0305
Luna
No
111-05-LU
111-07-LU
111-10-LU
Length
mm
135
190
235
Gap width / Jaw depth
mm
0-30 / 22
0-42 / 33
0-63 / 40
Weight
g
180
370
600
362
Please quote the
Shears - Pliers
Stainless steel. Self-locking. Serrated, adjustable jaws with pipe grip. With release lever. Used for aluminium welding,
when the magnetic field forces magnetic clamping tools to move or fall away.
Art. no.
2851
-0105
-0204
-0303
Length
mm
175
200
250
Gap width
mm
0-35
0-40
0-45
Pack.
qty
6
6
6
Universal pliers
Hand tools
Universal pliers
4
"Teng Tools" Self-locking. Serrated, adjustable jaws with pipe grip and cutters. With release lever. Nickel-plated.
Art. no.
7425
-0036
-0044
-0051
-0101
-0200
Teng Tools
No
401-4
401-5
401-7
401-10
401-12
Length
mm
100
125
175
250
300
Size
mm
0-25
0-28
0-38
0-47
0-50
Pack.
qty
5
5
5
5
5
Universal pliers
"Luna" Omnimum grip multi-grips. Powder coated, self-locking and with single non-pinch release lever. The design of
the jaws make it possible to hold all possible shapes such as round, square, flat, etc.
Art. no.
21093
-0103
-0202
Luna
No
131-07-LU
131-10-LU
Length
mm
200
235
Gap depth
mm
0-40
0-60
Jaw depth
mm
47
60
Weight
g
410
630
Pack.
-
Special jaws
Universal pliers
"Teng Tools" C-grip with swivel jaws for clamping shaped materials. Self-locking and with release lever. Nickel-plated.
Art. no.
12830
-0100
Teng Tools
No
406P
Length
mm
275
Gap width
mm
80
Weight
g
772
Pack.
qty
5
Universal pliers
"Luna" Powder coated, self-locking and with single non-pinch release lever. Flexible, serrated jaws for secure clamping
of section materials.
Art. no
20492
-0102
-0201
Luna
No
233-10-LU
233-12-LU
Length
mm
235
300
Gap width
mm
0-45
0-100
Jaw depth
mm
28
82
Weight
g
640
790
Pack.
-
Universal pliers
"Teng Tools" With swivel jaws for clamping shaped materials. Self-locking and with release lever. Nickel-plated.
Art. no.
12831
-0109
Teng Tools
No
409P
Length
mm
300
Gap width
mm
65
Weight
g
580
Pack.
qty
5
Universal pliers
"Teng Tools" With extra narrow jaws. Equipped with pipe grip and cutters. Self-locking. With release lever. Nickelplated.
Art. no.
7427
-0059
-0109
-0208
Teng Tools
No
404-4
404-6
404-9
Length
mm
100
160
230
Jaw width
mm
2
6
9
Jaw length
mm
35
35
70
Pack.
qty
5
5
5
Universal pliers
"Luna" For sheet metalwork, etc. Powder coated, self-closing and with single non-pinch release lever. Wide jaws that
grip along the entire front edge for clamping and bending sheet metal.
Art. no.
20403
-0100
363
Hand tools
4
Shears - Pliers
Luna
Length
Width of jaws
Gap width
Jaw depth
Weight
Pack.
No
mm
mm
mm
mm
g
qty
128-08-LU
200
80
0-45
48
520
-
Universal pliers
"Teng Tools" For sheet metalwork, etc. Powerful, wide jaws that grip along the entire front edge for clamping and
bending sheet metal. Self-locking. With release lever. Nickel-plated.
Art. no.
10195
-0103
Teng Tools
Nr
408
Length
mm
200
Jaw width
mm
75
Size
mm
0-42
Pack.
qty
5
Welding grips
Welding grip
"Luna" U-grip. Powder coated, self-locking and with single non-pinch release lever. Holds two sections in place when
e.g. welding. The U-shape permits access to the entire joint.
Art. no.
21078
-0102
-0201
Luna
No
125-09-LU
125-12-LU
Length
mm
200
300
Gap width
mm
Ø 0-60
Ø 0-90
Jaw depth
mm
67
87
Weight
g
690
960
Pack.
-
Welding grip
"Teng Tools" For structural steel, etc. Hardened jaws. Self-locking. With release lever. Nickel-plated.
Art. no.
10194
-0104
Teng Tools
No
407
Length
mm
225
Size
mm
0-65
Pack.
qty
5
Welding grip
"Luna" Grips for pipe work. Powder coated, self-locking and with a single non-pinch release lever. Secure grip on pipes
when e.g. welding.
Art. no.
21091
-0105
Luna
No
126-12-LU
Length
mm
300
Gap width
mm
Ø 90
Jaw depth
mm
93
Weight
g
960
Pack.
-
Welding grip
"Luna" C-grip. Powder coated, self-locking and with single non-pinch release lever. Large and deep opening also permits work over thresholds and large distances.
Art. no.
21075
-0105
-0204
-0303
Luna
No
124-06-LU
124-12-LU
124-18-LU
Length
mm
165
300
460
Gap width
mm
0-60
0-100
0-260
Jaw depth
mm
50
94
260
Weight
g
240
890
1300
Pack.
-
Welding grip
"Luna" Made of aluminium for aluminium welding. C-shaped jaws for sections, etc. Self-locking and with single nonpinch release lever.
Art. no.
21097
-0109
-0208
Luna
No
144-12-LU
144-14-LU
Length
mm
300
360
Gap width
mm
0-90
0-180
Jaw depth
mm
96
150
Weight
g
670
870
Pack.
364
Please quote the
Shears - Pliers
"Teng Tools" C-shaped jaws for sections, etc. Self-locking. With release lever. Nickel-plated.
Art. no.
10193
-0105
Teng Tools
No
406
Length
mm
250
Size
mm
0-80
Throat depth
mm
70
Throat height
mm
100
Pack.
qty
5
Hand tools
Welding grip
4
Sets
Welding grip
"Luna" C-grip. Powder coated, self-locking and with single non-pinch release lever. Large and deep opening also permits work over thresholds and large distances. Swivel clamping jaws make it possible to clamp sectioned materials.
Art. no.
20491
-0103
-0202
-0301
-0400
-0509
Luna
No
224-06-LU
224-12-LU
224-14-LU
224-18-LU
224-24-LU
Length
mm
165
300
365
470
630
Gap width
mm
0-50
0-80
0-125
0-240
0-400
Jaw depth
mm
46
90
130
230
410
Weight
g
270
970
1200
1430
1740
Pack.
-
Pressure guard
Pressure guard for Grip-On grips
"Grip-On" Pressure guard made of plastic that protects the work piece from damage by the grips. Fit Grip-On grips
224, 234 and 222-12 med swivel pressure plates.
Art. no.
13225
-0101
Grip-On
No
224
Pack.
qty
10
"Welper" Multi-purpose pliers for a range of applications. These include disconnecting and cleaning gas bushings, removal of contact tubes, cutting and removal of welding wire, spatter removal. The pliers have a polished head, jaws with
serrated gripping surfaces and plastic-coated handles.
Art. no.
3829
-0102
Welper
No
YS-50
Length
mm
210
Pack.
qty
1
"Original Fix". CO2 special grip for use with MIG/MAG welding. Used for wire cutting, cleaning gas bushings, removal
of gas bushings and contact pipes.
Art. no.
10346
-0101
-0200
Original Fix
No 1
No 2
For gas bushings, diameter
mm
12-15
15-18
Pack.
qty
1
1
Tile pliers
Tile breaking pliers
Tile breaking pliers - cutting pliers
Combined breaking and cutting pliers. For cutting and dividing wall and floor tiles. Fitted with hard metal wheel. Side
dolly with scale. Plastic covered handles.
Art. no.
6516
-0301
Length
mm
220
Pack.
qty
6
Extra hard metal wheel
6516
-0400
Pack.
qty
1
Punch pliers
Punch pliers for tiles
"Stubai" Intended for cutting holes in tiles. Also suitable for mosaic. Black.
Art. no.
0929
Length
mm
Pack.
qty
-0107
190
5
365
Hand tools
4
Shears - Pliers
Tinmens tongs
Tinmens tongs
"Stubai" Single joint. The ends of the handles have a round or flat form. Black. With plastic covered handles.
Art. no.
0809
-0102
Length
mm
300
Jaw width
mm
23
Cuts iron wire
mm
2.5
Pack.
qty
5
Folding pliers
Folding pliers
"Stubai" With straight jaws. Double joint. Black. With plastic covered handles.
Art. no.
0936
-0108
Jaw width
mm
60
Length
mm
280
Pack.
qty
5
-0207
80
300
5
Folding pliers
"Stubai" With surved jaws 45°. Double or single joint. Black. With plastic covered handles.
Art. no. double joint
0937
-0107
Jaw width
mm
18
60
Length
mm
250
250
Pack.
qty
5
Art. no. single joint
0937
-0065
-1006
Pack.
qty
5
5
-0206
80
300
5
-
Folding pliers
Parallel tensioning For sheet max thickness 1.0 mm. Hardened clamping jaws. With return spring. Plastic-coated handles
of solid round iron.
Art. no.
9426
-0106
Jaw width
mm
22
Fold width
mm
13
Jaw depth
mm
23
Length
mm
280
Pack.
qty
1
Folding and punch pliers
Folding and punch pliers
Combined folding and punch pliers Suitable for car bodywork. The patented cutting head is tightened with the relevant
torque. Hardened clamping jaws. Plastic covered handles. Supplied with punch and die 5 mm.
Art. no.
2210
-0101
Orig.-no
61202
Jaw width
mm
22
Fold width
mm
13
Throat depth (punch pliers)
mm
8
Max. plate thickness
mm
1.25
Cuts hole diameter
mm
4-6
Length
mm
290
Weight
kg
1.2
Pack.
qty
1
Punch and die
2210
-0200
-0309
-0408
For hole diameter
mm
4
5
6
Pack.
qty
1
1
1
Rabbit tongs
Rabbit tongs
"Stubai" Single joint. Specially designed jaws for picking up single bevel Black. Plastic covered handles.
Art. no.
0942
-0209
Jaw width
mm
33
Length
mm
250
Pack.
qty
5
366
Please quote the
Shears - Pliers
For steel
Punch pliers for steel sheet
With adjustable guide. Junior model supplied with punch and die 5 mm, Senior model with punch and die 6 mm. With
plastic-coated handles of solid round iron.
Art. no.
0950
-0109
-1602
Size
No
Junior
Senior
Length
mm
270
330
Throat depth
mm
30
38
Max. plate thickness
mm
2
2
Cuts hole diameter
mm
2-5
2-8
Weight
kg
1
2
Pack.
qty
1
1
HoleJunior
Senior
diam.
Punches
Dies
Punches
Dies
Holding diam. 7 mm
External diam. 10 mm Holding diam.10 mm
External diam.13 mm
Length 34 mm
Height 7 mm
Length 44 mm
Height 9.5 mm
Art. no.
Pack.
Art. no.
Pack.
Art. no.
Pack.
Art. no.
Pack
mm
0950
qty
0950
qty
0950
qty
0950
qty
2
-0208
1
-0901
1
-1701
1
-2808
1
2.5
-0307
1
-1008
1
-1800
1
-2907
1
3
-0406
1
-1107
1
-1909
1
-3004
1
3.5
-0505
1
-1206
1
-2006
1
-3103
1
4
-0604
1
-1305
1
-2105
1
-3202
1
4.5
-0703
1
-1404
1
-2204
1
-3301
1
5
-0802
1
-1503
1
-2303
1
-3400
1
6
-2501
1
-3608
1
7
-2709
1
-3806
1
8
-2758
1
-3905
1
Hand tools
Punch pliers
4
Electronics end cutting nippers
Side cutters
Side cutters
"Knipex" Single joint. Precision design tips. Without phase. With spring. Bright polished. Two component handle.
ESD protection. With electrical discharging handles that prevent the occurrence of static electricity in the pliers steel
front if the user wears an earth connected wrist strap.
Art. no.
9364
-0100
-0209
Knipex "Super Knips"
No
7803
7813
With wire retainer
No
Yes
Length
mm
125
125
Length of cutters
mm
9
9
Cuts copper wire
mm
0.2-1.6
0.2-1.6
Cuts iron wire max.
mm
1.0
1.0
Pack.
qty
6
6
Ditto ESD protected
9364
-1009
-1108
Knipex
No
7803 ESD
7813 ESD
Pack.
qty
6
6
Side cutters
"Knipex" Single joint. Precision design, induction hardened tips. Without phase. With spring. Bronzed. Two component handle.
ESD protection. With electrical discharging handles that prevent the occurrence of static electricity in the pliers steel
front if the user wears an earth connected wrist strap.
Art. no.
0231
-0100
-0209
Knipex "Super Knips"
No
7861
7871
With wire retainer
No
Yes
Length
mm
125
125
Length of cutters
mm
9
9
Cuts copper wire
mm
0.2-1.6
0.2-1.6
Cuts iron wire max.
mm
1.2
1.2
Cuts spring wire max.
mm
0.6
0.6
Cuts piano wire max.
mm
0.25
0.25
Pack.
qtyqty
6
6
Ditto ESD protected
0231
-1009
Knipex
No
7861 ESD
Pack.
qtyqty
6
367
Shears - Pliers
Side cutters
Hand tools
4
"Knipex" Single joint. Precision ground, induction hardened tips with very small chamfer. Bronze with polished head.
Return spring. Two component handle.
Art. no.
15041
-0108
Knopex
No
7891
With wire retainer
Yes
Length
mm
125
Length of cutters
mm
9
Cuts copper wire
mm
1.2-1.6
Cuts iron wire
mm
1.2
Cuts spring wire
mm
0.6
Pack.
qty
6
Side cutters
"Knipex" Sturdy design. With phase. Double joint. Return spring. Polished. Red, plastic coated handles.
Art. no.
4975
-0102
-0201
Knipex
No
7701
7711
With wire retainer
No
Yes
Length
mm
115
115
Cuts copper wire
mm
0.3-1.6
0.3-1.6
Cuts iron wire max.
mm
1.2
1.2
mm
0.5
0.5
Pack
qty
6
6
Side cutters
"Knipex" With narrow and thin head for precision work on electrical components. Inductively hardened, precision
cutters. Single joint. With return spring. Bronzed, with red, plastic-coated handles.
Art. no.
4972
-0105
-0204
-0303
Knipex
No
7502
7512
7522
With phase
Yes
Yes
No
With wire retainer
No
Yes
No
Length
mm
125
125
125
Cuts copper wire
mm
0.2-1.3
0.2-1.3
0.2-1.3
Cuts iron wire max.
mm
1.0
1.0
1.0
mm
0.6
0.6
0.4
Cuts piano wire
mm
0.4
0.4
Pack
qty
6
6
6
Flat nose pliers
Flat nose pliers
"Knipex" With flat jaws. Single joint. Smooth grip. Polished. Red plastic-coated handles.
Art. no.
4980
-0105
Knipex no
3211
Length
mm
135
Nose length
mm
34
Width of nose
mm
2
Pack
qty
6
Pliers case
Electronic pliers in case.
"Knipex" Black leather case with zip fastener. Contains six electricians pliers and one set of pincers.
Art. no.
1791
-0100
Knipex
No
002016
Contents: side cutters
No
7702-115
side cutters
No
7742-115
diagonal cutters
No
6432-120
flat nose pliers
No
3512-115
snipe nose pliers
No
3522-115
round nose pliers
No
3532-115
pincers
No
9304-115
Pack
qty
1
368
Please quote the
Tools for electricians - Electronic pliers
Pincers
With pointed, serrated jaws. Fitted with pin that guides the tips. Nickel plated.
Art. no.
1273
-0107
Length
mm
120
Pack.
qty
10
-0305
155
10
Hand tools
Pincers
4
Pincers
With curved tip. Pointed, serrated jaws. Fitted with pin that guides the jaws. Nickel-plated.
Art. no.
1278
-0102
Length
mm
150
Pack.
qty
10
Pincers
"Knipex" Precision pincers with extra fine tips for delicate assembly work. Manufactured of austenitic steel, anti-magnetic and stainless. Polished, non-glare.
Art. no.
10243
-0105
-0204
Knipex
No
92 22 12
92 34 28
Length
mm
105
105
Tip shape
straight
angled 45°
Pack.
qty
12
6
Electricians pliers
Stripping pliers
Stripping pliers
"Teng Tools" Single joint. With adjuster screw for required wire diameter 0.2-3.0 mm. Return spring and ergonomically designed two component handle sleeves.
Art. no.
0870
-0106
Teng Tools
No
MB499-7T
For wire diameter
mm
0.2-3.0
Length
mm
160
Pack.
qty
6
Stripping pliers
"Knipex" Single joint. With adjuster screw for required wire diameter up to 5 mm. With spring. Polished. Plastic covered handles.
Art. no.
9363
-0101
Knipex
No
1101
Length
mm
160
Pack.
qty
6
Ditto bulk pack
9363
-1000
Pack.
qty
6
Stripping pliers
"Skalmatic" Strips cables automatically without presetting, e.g. multi-conductor cables, car/boat cables, signal cables,
tape cables, TV cables. Pliers have a complete terminal function, also crimps ignition cable end fittings. Fitted with cutters.
Art. no.
5126
-0107
Stripping function
mm²
0.13-6.0
For terminals
red-blue-yellow
Pack.
qty
10
369
Hand tools
4
Electricians pliers
Electricians Pliers
"Knipex" For stripping cables. With three stripping holes, side cutting edges and crimping function for terminals. The
pliers have serrated jaws, single joint, polished head and plastic-coated handles.
Art. no.
3041
-0104
Knipex
No
1301
Length
mm
160
Unsheathing pliers
mm
0.9 1.4 1.8
For conductor area
mm²
0.6 1.5 2.5
Pack.
qty
6
Ditto bulk pack
3041
-1003
Pack.
-
Cable knives
Cable blade
For simple stripping of cables and plastic insulated copper tubing. Rounds and side cuts in one action. With adjuster
screw for insulation thickness. Shaft of hard plastic - contains spare blade.
Knife 5075-0108 with blade, others without.
Art. no.
5075
-0108
-0132
-0157
With knife blade
Yes
No
No
For cable diameter
mm
8-28
4-16
8-28
Length
mm
170
155
155
Pack.
qty
1
1
1
Spare blade for stripping
5075
-0504
Pack.
qty
10
Cutters and wire strippers
Cutters and wire strippers
"Abiko" Ergonomically designed tool for different types of cable insulation (PVC, rubber, etc.). Three different cuts length- cross and spiral shaped.
Art. no.
14473
-0108
Abiko
type
TOR
Strips cables
mm
4.5-40
Pack.
qty
1
Unsheathing pliers
Unsheathing pliers
"Abiko" Automatic - the wire is held firmly as the insulation is removed. Strips both solid and twisted cables. Adjustable
stripping length. Separate cutters for cutting the cable.
Art. no.
11222
-0108
Abiko
type
Minim
For cable area
mm²
0.08-2.5
Max. cut
mm
2.5 (solid 1.5)
Length
mm
135
Pack.
qty
1
Unsheathing pliers
"Abiko" Automatic - the wire is held firmly as the insulation is stripped. Strips both solid and twisted cables. Adjustable
stripping length. Separate cutters for cutting the cable. Replacable sheath stripping edge.
Art. no.
5036
-0106
Abiko
type
Maxim
For cable area
mm²
0.08-6.0
Length
mm
200
Pack.
qty
1
Unsheathing pliers
"Abiko" Automatic - the wire is held firmly as the insulation is stripped. Strips both solid and twisted cables. Adjustable
stripping length and adjustable cutting depth. Separate cutters for cutting the cable. Replaceable sheath stripping edge.
Ergonomically designed two-component handles.
Art. no.
11822
-0102
Abiko
type
Embla
For cable area
mm²
0.05-10.0
Length
mm
190
Pack.
qty
1
370
Please quote the
Cable pliers
"Teng Tools" For copper and aluminium cables. Two cutting positions. One-hand function with pinch guard. With
ergonomically designed two component handle sleeves.
Art. no.
10976
-0108
Teng Tools
No
MB444-8T
Length
mm
200
Cuts copper cable max.
mm²
95
For cable diameter
mm
14
Pack.
qty
6
Hand tools
Cable pliers
4
Cable pliers
"Knipex" For copper and aluminium cables. One-hand function with pinch guard. Cuts without deforming the cable.
Not for steel wire. Black enamel head. Screw joint with option for after adjustment. Plastic covered handles.
No 9511-200 has two cutting positions. For initial and final cut, cables up to 25 mm Ø can be cut.
Art. no.
1968
-0156
-0305
Knipex
No
9511
9511
Length
mm
165
200
Head
black enamel
black enamel
mm²
50
50
For cable diameter
mm
15
20
Pack.
qty
6
6
Cable pliers
"Knipex" For copper and aluminium cables. with pinch guard. Cuts without deforming the cable. Not for steel wire.
Reversible handles - can be used to strip cable. With two cutting positions.
Art. no.
14925
-0102
Knipex
No
9511 165A
Length
mm
165
mm²
50
For max. cable diameter
mm
15
Pack.
qty
6
Cable pliers
"Abiko" Entirely forged design. Specially designed cutters. Cuts without deforming the cable. Plastic covered handles.
Art. no.
2307
-0105
Abiko
No
UP-B 41
Length
mm
200
mm²
95
For cable diameters max
mm
14
Pack.
qty
1
Cable cutters
Cable scissors
"Teng Tools" With high carbon stainless steel blade. Handle of nylon with 30% fibreglass.
Art. no.
14414
-0100
Teng Tools
No
497
Capacity, soft cable
mm
22
Blade length
mm
42
Total length
mm
138
Pack.
qty
10
Cable cutter
"Teng Tools" Heavy duty cable cutter. Drop forged. Chrome molydenium alloy steel blades are hardened to help
maintain cutting edges. Chmpound leverage increases cutting power while reducing cutting effort. New quick and simple
spring-free automatic latch design (one hand release) provides safety and convenience. Cutts the following s: Copper
and aluminium electric cables up to number 2AWG (14 mm²) diameter HRC 60-62.
Art. no.
14405
-0101
Teng Tools
No
496
Length
mm
250
For cable diameter
mm
12
Pack.
qty
6
371
Hand tools
4
Cable cutters
"Knipex" For copper and aluminium cables. Ratched compound action in small steps - means extra power even in
difficult work positions. One-hand function. Cuts without deforming the cable. Bronze. Plastic covered handles.
Available with insulation according to SS IEC 900 for work under voltage up to 1000 volt (Knipex-no 9536).
Art. no.
2832
-0109
-0208
Knipex
No
9531
9531
Length
mm
250
280
For cable diameter
mm
6-32
6-52
For conductor area max. mm²
240
380
Pack.
qty
6
6
Spare cutter
2832
-0356
-0406
Width
mm
6
Pack.
qty
1
1
Cable shears
"Knipex" For copper and aluminium cables. Cuts without deforming the cable. Forged steel cutter Tubular handles
with plastic grips.
Available with insulation according to SS IEC 900 for work under voltage up to 1000 volt (Knipex-no 9517).
Art. no.
3681
-0109
Knipex
No
9511-500
Length
mm
500
mm²
150
For cable diameter
mm
27
Pack.
qty
1
Cable shears
"Knipex" For copper and aluminium cables with hard rubber or plastic sheath. Ratched compound action in small steps
- means extra power. Can be opened in all cutting positions. Cuts without deforming the cable. Polished head. Tubular
handles with plastic grips. Not for cutting steel wire.
Art. no.
0582
-0105
-0204
Knipex-no
9531720
870
Length
mm
720
870
For cable diameter
mm
6-60
6-100
For conductor area
mm²
740
960
Weight
kg
5.0
5.46
Pack.
qty
1
1
Spare blade
0582
-0303
-0402
Knipex-no
9539720
870
Pack.
qty
1
1
1000-volts tools
Plier wrenches
Plier wrench - 1000 volt
"Knipex" With insulation according to SS IEC 60900 for work under voltage up to 1000 volt (by especially
trained personnel). With parallel jaws, high clamping force through 10 double handle transmission ratio and quick
setting by pushing the setting button. Smooth grip jaws. The jaw action makes it possible to work with the plier
wrench as a pair of pliers without changing the setting. The narrow head gives and assured grip even in confined areas.
Art. no.
15040
-0109
Knipex
No
8607
Length
mm
250
mm
0-46
Pack.
qty
1
Combination pliers
Combination pliers 1000-volt
"Teng Tools" Manufactured and tested according to the standard EN 60900 for work under voltage up to 1000 volt
(by qualified electricians). Heavy-duty model with pipe grip and serrated grip surfaces. With ergonomically designed two
component handle sleeves.
Art. no.
11761
-0105
-0204
Teng Tools
No
MBV451-7
MBV451-8
Length
mm
175
200
Cuts piano wire
mm
1.5
2.0
Pack.
qty
6
6
372
Please quote the
Side cutters 1000-volt
(by qualified electricians). Single joint. Polished head. Ergonomically designed two component handle sleeves.
Art. no.
11758
-0100
Teng Tools
No
MBV441-6
Length
mm
150
Cuts piano wire
mm
0.5
Pack.
qty
6
Hand tools
Side cutters
4
Side cutters 1000-volt
(by qualified electricians). Heavy-duty model with hardened 72° side cutters. With ergonomically designed two component handle sleeves.
Art. no.
11759
-0109
Teng Tools
No
MBV442-8
Length
mm
200
Cuts piano wire
mm
2.5
Pack.
qty
6
Flat nose pliers
Flat nose pliers with side cutters 1000-volt
(by qualified electricians). Single joint. Polished head. Long, straight jaws. Serrated grip surface. With ergonomically designed two component handle sleeves.
Art. no.
11762
-0104
Teng Tools
No
MBV461-8
Length
mm
200
Length of nose
mm
65
Pack.
qty
6
Stripping pliers
Stripping pliers 1000-volt
(by qualified electricians). Single joint. With adjust screw to set the required wire diameter 0.2-3.0 mm as well as return
spring and ergonomically designed two component handle sleeves.
Art. no.
11763
-0103
Teng Tools
No
MBV499-7
For wire max. dia.
mm
0.2-3.0
Length
mm
180
Pack.
qty
6
Set of pliers
Set of insulated pliers 1000 volt
"Teng Tools" Set of 4 insulated pliers. Manufactured according to the standard EN 60900 for work under voltage up
Art. no.
11749
-0102
Teng Tools
No
TTV440
Contents:
Side cutters MBV441-6, length
mm
150
Combination pliers MBV451-7, length
mm
175
Flat nose pliers MBV461-8, length
mm
200
Stripping pliers MBV499-7, length
mm
175
Case size
mm
265x142x50
Weight
kg
1.1
Pack.
set
1
Cable knives
Cable knife 1000-volt
trained personnel). For stripping cables. With ergonomically designed safety grip. Fixed knife blade.
Art. no.
0239
-0102
Knipex
No
9852
Total length
mm
180
Blade length
mm
50
Pack.
qty
6
373
Cable knife 1000-volt
Hand tools
4
trained personnel). For simple stripping of cables. The knife blade has a flat pin design at the tip which helps when stripping and avoids damage to the cable wires. With ergonomically designed safety grip. Fixed knife blade.
Art. no.
8022
-0106
Knipex
No
9855
Blade length
mm
35
Length
mm
155
Pack.
qty
6
Cable shears
Cable pliers 1000-volt
trained personnel). Single joint. Hardened, precision ground blades for cutting copper and aluminium cables (not for steel
wire). Adjustable joint screw with turn nut. Chromium-plated.
No 9516-200 has two cutting positions. For initial and final cut, cables up to 25 mm Ø can be cut.
Art. no.
2709
-0109
-0208
Knipex-no
9516165
200
Length
mm
165
200
Cuts multicore copper cables
mm²
35
50
Max. Cabele diameter
mm
12
20
Pack.
qty
6
6
Cable pliers 1000-volt
"Knipex" Chrome head manufactured of stainless alloy steel. With insulation according to SS IEC 900 for
work under voltage up to 1000 volt (by especially trained personnel). Adjustable, single joint screw. Hardened, precision
ground blades for cutting copper and aluminium cables (not for steel wire).
Art. no.
10147
-0102
Knipex
No
9506
Length
mm
230
Cuts multicore copper cables
mm²
50
Cuts fine-wired copper cables
mm²
70
Max. cable diameter
mm
16
Pack.
qty
6
Pincers
Pincers 1000-volt
"Knipex" With flat jaws. Anti magnetic, stainless steel. Plastic covered electrically insulated handles. With VDE insulation for work under voltage up to 1000 volt (by especially trained personnel).
Art. no.
12808
-0108
Knipex
No
92 27 61
Length
mm
130
Pack.
qty
12
Pincers 1000-volt
With flexible, serrated, pointed jaws. Anti-magnetic, stainless steel. Plastic covered, electrically insulated handles. With
VDE insulation for work under voltage up to 1000 volt (by especially trained personnel).
Art. no.
6559
-0101
Length
mm
150
Pack.
qty
10
Crimping tools
Crimping tools
"Abiko" Ergonomic crimping tool for industrial use. Intended for crimping of coaxial connectors of type BNC/TNC.
The tool has an automatic ratchet mechanism that ensures crimping is carried out properly. With ergonomic design and
patented mechanics for the best possible grip for large or small hands in combination with low handle pressure to suit
users who crimp on a regular basis.
Art. no.
5361
-0101
Abiko
No
DCC 1113
For connector type
BNC/TNC
For cable
RG
58-59-62
Length
mm
195
Weight
kg
0.25
Pack.
qty
1
374
Please quote the
For insulated terminals
Crimping tool for insulated terminals
"Teng Tools" For crimping terminals and splices without soldering. With shears for cutting bolts without damaging
the threads. Special edges for cutting the conductor wire. Special stripping edges. Colour coded crimping slots for crimping terminals by the conductor wire. Plastic covered handles.
No CP50. Crimps insulated and non insulated terminals.
No CP51. Crimps insulated splices and roll crimping.
Art. no.
5834
-0209
-0308
Teng Tools
No
CP50
CP51
Total length
mm
225
225
mm²
0.75-6
0.75-6
For non insulated terminals
mm²
1.5-6
0.5-2.5
Shears for cutting bolts
M
2.5 3 3.5 4 5
2.5 3 3.5 4 5
Stripping edge for conductor area
mm²
0.75 1.0 1.5 2.5 4 6
0.75 1.0 1.5 2.5 4 6
Pack.
qty
10
10
Hand tools
Crimping pliers
4
Crimping tools
"Teng Tools" Automatic lock mechanism ensures that crimping is finished correctly. For insulated and non insulated
terminations and for roll crimping. Cutting edge for bolts M2-M5. Stripping of conductors 0.75-6 mm².
Art. no.
12839
-0101
Teng Tools
No
CP52
Total length
mm
225
mm²
1.5-6
mm²
1.5-2.5
Stripping edge for conductor area
mm²
0.75-6
Cutting edge for bolts
M
2-5
Pack.
qty
5
"Abiko" Ergonomic crimping tool for industrial use. Intended for crimping insulated terminals. The tool has an automatic ratchet mechanism that ensures crimping is carried out properly. Suitable for both right and left handed action.
Ergonomic two component handle.
Art. no.
11224
-0106
Abiko
No
DSA-0115
Total length
mm
198
For wiring
mm²
0.14-1.5
Pack.
qty
1
"Abiko" Ergonomic crimping tool for industrial use. Intended for crimping insulated terminals. The tool has an automatic ratchet mechanism that ensures crimping is carried out properly. With ergonomic design and patented mechanics
for the best possible grip for large or small hands in combination with low handle pressure all to suit users who crimp
on a regular basis. Crimping jaws are symmetrical to suit both right and left action.
Art. no.
7272
-0105
-0303
-0402
Abiko
No
DSA 0725
KSA-0760
KSAC 0760
Total length
mm
190
220
255
For terminals
red-blue
red-blue-yellow
red-blue-yellow
Pack.
qty
1
1
1
Crimping tool
"Abiko" For insulated terminals 0.5-6.0 mm2 and crimping receptacles 0.25-4 mm². Automatic locking mechanism that
ensures crimping is completed correctly and that the terminals are kept in the right position. Ergonomically designed
handles.
Art. no.
14986
-0108
Abiko
No
ESA 0760
Total length
mm
220
For wiring
mm²
0.5-6.0
Pack.
-
For uninsulated terminals
Crimping tool for uninsulated terminals
"Abiko" Ergonomic crimping tool for industrial use. Intended for crimping uninsulated terminals. The tool has an automatic ratchet mechanism that ensures crimping is carried out properly. With ergonomic design and patented mechanics for the best possible grip for large or small hands in combination with low handle pressure all to suit users who crimp
on a regular basis. Crimping jaws are symmetrical to suit both right and left action.
Art. no.
5972
-0201
-0300
Abiko
No
DKB 0325
KWB 4099
Total length
mm
195
220
For wiring
mm²
0.35-2.5
4-10
Pack.
qty
1
1
375
Hand tools
4
For roll crimping
Crimping pliers for roll crimping
"Abiko" Ergonomic crimping tool for industrial use. Intended for crimping flat pins/flat pin sleeves. The tool has an automatic ratchet mechanism that ensures crimping is carried out properly. With ergonomic design and patented mechanics for the best possible grip for large or small hands in combination with low handle pressure all to suit users who crimp
on a regular basis.
Art. no.
7201
-0200
Abiko
No
KRB 0560
Total length
mm
220
For wiring
mm²
0.5-6.0
Pack.
qty
1
Terminals
Insulated
Terminal - insulated
"Abiko" For crimping. The raw material is made up of tinned copper - insulated with Polyamide (Nylon) with colour
markings for respective conductor areas, easy-entry.
Specify no. of packs when ordering.
Art. no.
0894
-0306
-0355
-0405
-1502
Abiko
No
KA1543R
KA1553R
KA1565R
KA2543R
Colour
Red
Red
Red
Blue
For conductor area mm²
0.75-1.5
0.75-1.5
0.75-1.5
1.5-2.5
For screw
M4
M5
M6
M4
No. per
pack.
100
100
100
100
Pack.
qty
1
1
1
1
Ditto DIY pack
5169
-0105
-0204
-0303
-0402
No terminals
per DIY pack
10
10
10
10
No. DIY-pack per
pack
20
10
10
10
Art. no.
0894
-1551
-1601
-2807
Abiko
No
KA2553R
KA2565R
KA2585R
KA4653R
Colour
Blue
Blue
Blue
Yellow
1.5-2.5
1.5-2.5
1.5-2.5
4-6
For screw
M5
M6
M8
M5
No. per
pack.
100
50
50
50
Pack.
qty
1
1
1
Ditto DIY pack
5169
-0501
-0600
-0709
No terminals
per DIY pack
10
10
10
No. DIY-pack per
pack
10
10
10
Art. no.
0894
-2856
-2906
Abiko
No
KA4665R
KA4685R
KA4610R
Colour
Yellow
Yellow
Yellow
4-6
4-6
4-6
For screw
M6
M8
M 10
No. per
pack.
25
25
25
Pack.
qty
1
1
Ditto DIY pack
5169
-0808
-0907
-1004
No terminals
per DIY pack
10
10
5
No. DIY-pack per
pack
10
10
10
"Abiko" For crimping. The raw material is made up of tinned copper - insulated by Polyamide (Nylon) with colour
marking for respective conductor areas, easyentry.
Specify number of packs when ordering.
Art. no.
0894
-0603
-1809
-3102
Abiko
No
KA1543G
KA2543G
KA4653G
Colour
Red
Blue
Yellow
0.75-1.5
1.5-2.5
4-6
For screw
M4
M4
M5
No. per
pack.
100
100
50
Pack.
qty
1
1
1
376
Please quote the
"Abiko" For crimping. The raw material is made up of tinned copper - insulated with Polyamide (Nylon) with colour
markings for respective conductor areas, easy-entry. Splicing sleeve - insulation of transparent Macrolon plastic.
Art. no.
0894
-0751
-1957
Abiko
No
KA1525SK
KA2527SK
KA4652SK
Colour
Red
Blue
Yellow
0.75-1.5
1.5-2.5
4-6
No. per
pack.
50
50
25
Pack.
qty
1
1
Ditto DIY pack
5169
-2655
-2705
-2804
No terminals
per DIY pack
10
10
5
No. DIY-pack per
pack
10
10
10
Hand tools
4
Terminals - insulated
"Abiko" For crimping. The raw material consists of tinned copper - insulation with colour coding for respective conductor areas. The insulation consists of shrink tubing with adhesive.
Art. no.
4819
-0102
-0201
Abiko
No
KA1535SKW
KA2535SKW
Colour
Red
Blue
For conductor area
mm²
0.5-1.5
2.5
No. per
pack.
50
25
Pack.
qty
1
1
"Abiko" For crimping. The raw material is made up of tinned brass - insulated with Polyamide (Nylon) with colour
markings for respective conductor areas, easy-entry.
Art. no.
0894
-0876
-0884
-0892
-0900
Abiko
No
KA1503FLS-8
KA1505FLS-5
KA1505FLS-8
KA1507FLS
Colour
Red
Red
Red
Red
Reed width
mm
2.8
4.8
4.8
6.3
For pin thickness
mm
0.8
0.5
0.8
0.8
For conductor area
mm²
0.5-1.5
0.5-1.5
0.5-1.5
0.75-1.5
No. per
pack.
100
100
100
100
Pack.
qty
1
1
1
1
Ditto DIY pack
5169
-1400
-1509
-1608
-1707
No terminals
per DIY pack 10
10
10
10
No. DIY-pack per
pack
10
10
10
10
Art. no.
0894
-0926
-2252
-2286
-3250
Abiko
No
KA1507FLSF
KA2507FLS
KA2507FLSF
KA4607FLS
Colour
Red
Blue
Blue
Yellow
Reed width
mm
6.3
6.3
6.3
6.3
For pin thickness
mm
0.8
0.8
0.8
0.8
For conductor area
mm²
0.75-1.5
1.5-2.5
1.5-2.5
4-6
No. per
pack.
50
50
25
50
Pack.
qty
1
1
1
1
Ditto DIY pack
5169
-1806
-1905
-2002
-2200
No terminals
per DIY pack 10
10
10
5
No. DIY-pack per
pack
10
10
10
10
markings for respective conductor areas.
Art. no.
0894
-2369
-2401
Abiko
No
KA1507FLSH
KA2507FLSH
Colour
Red
Blue
Reed width
mm
6.3
6.3
For conductor area
mm²
0.75-1.5
1.5-2.5
No. per
pack.
50
50
Pack.
qty
1
1
Ditto DIY pack
5169
-2309
-2408
No terminals
per DIY pack
10
10
No. DIY-pack per
pack
10
10
377
Hand tools
4
"Abiko" For crimping. The raw material is made up of tinned brass - insulated by Polyamide (Nylon) with colour marking for respective conductor areas.
Specify number of packs when ordering.
Art. no.
0894
-0959
-2351
Abiko
No
KA1507H
KA2507H
Colour
Red
Blue
Reed width
mm
6.3
6.3
Reed thickness
mm
0.8
0.8
For conductor area
mm²
0.75-1.5
1.5-2.5
No. per
pack.
100
50
Pack.
qty
1
1
Ditto DIY pack
5169
-2507
-2606
No terminals
per DIY pack
10
10
No. DIY-pack per
pack
10
10
markings for respective conductor areas.
Art. no.
0894
-0827
-2054
Abiko
No
KA1504HA¹)
KA2505HA
Colour
Red
Blue
SleeveØ
mm
4
5
For conductor area
mm²
0.75-1.5
1.5-2.5
No. per
pack.
50
50
Pack.
qty
1
1
Ditto DIY pack
5169
-1053
-1103
No terminals
per DIY pack
10
10
No. DIY-pack per
pack
10
10
"Abiko" For crimping. The raw material is made up of tinned electrolytic copper - PC plastic insulation (macrolone
plastic) with colour marking for each conductor area.
Art. no.
0894
-0835
-2104
Abiko
No
KA1504HO
KA2505HO
Colour
Red
Blue
For Ø pin
mm
4
5
Smallest int. diam.
mm
4
3.9
For conductor area
mm²
0.75-1.5
1.5-2.5
No. per
pack.
25
25
Pack.
qty
1
1
Ditto DIY pack
5169
-1202
-1301
No terminals
per DIY pack
10
10
No. DIY-pack per
pack
10
10
Branch joint
Branch joint
"Abiko" For connection of cables without splicing.
Art. no.
0662
Abiko
No
Colour
For conductor area
mm²
No. per
pack.
Pack.
ea.
-0108
KA154
Red
0.75-1.5
5
1
-0207
KA254
Blue
1.5-2.5
5
1
Terminal block
Terminal block
"Abiko" In transparent soft plastic. For flat pin connections.
Art. no.
0890
Abiko
No
No of poles
Length×width×height
mm
F. pin with reed
mm
Pack.
qty
378
Please quote the
-0102
401/12
12
145×28×8
6.3
1
Terminals in set
"Teng Tools" Set consisting of crimping tool CP50 with slots for crimping red, blue and yellow terminals and cutters
for bolts and wire. Also included in the assortment are 120 terminals of varying types coloured red and blue. Supplied
Art. no.
11038
-0102
Teng Tools
No
TTCP121
Contains: crimping tool
quantity
1
Contains: terminals assorted
quantity
120
Insert size
mm
265x142x50
Weight
kg
0.6
Pack.
qty
1
Hand tools
Sets
4
Terminals in set
"Abiko" Consists of crimping tool with slots for crimping red, blue and yellow terminals and cutters for bolts and wires.
Also included in the assortment are a number of terminals of varying types and colours. In plastic case.
Art. no.
0892
-0100
Abiko
No
HB 150
Contains: crimping tool
quantity
1
Contains: terminal blocks
quantity
2
Contains: terminal assort.
quantity
120
Pack.
qty
1
Spade terminal set
"Abiko" Industrial range in plastic box with compartments. Consists of a crimping tool, a stripping tool, three terminal
blocks and approximately 350 spade terminals of varying types in blue, yellow and red finish.
Art. no.
12282
-0103
Abiko
No
AL 450A
Contains: crimping tool KSA 0760
quantity
1
Contains. wire strippers Skalmaster 001
quantity
1
Contains. terminal blocks
quantity
3
Contains. spade terminals sorted
approx quantity
350
Pack.
sts
1
Crimping pliers for crimping end sleeves
Crimping pliers
"Knipex" For crimping end sleeves. Automatic adjustment from 0.08-6.0 and 0.75-10 mm². Produces a square crimp
that corresponds to the requirements in DIN 46228 sections 1 and 4. With automatic ratchet device that prevents the
pliers from being opened before the correct crimping force has been applied.
Art. no.
3677
-0105
Knipex
No
9753-04
Length
mm
180
For conductor area
mm²
0.08-6.0
Weight
kg
0.38
Pack.
qty
6
Crimping pliers
"Knipex" For crimping end sleeves. Forward feed pliers that produce a square crimp that corresponds to the requirements in DIN 46228 sections 1 and 4. Self-adjusting button for end sleeves 0.08-6 or 10 mm². With automatic ratchet
device that prevents the pliers from being opened before the correct crimping force has been reached.
Art. no.
9864
-0105
Knipex
No
9753-08
Length
mm
190
For conductor area
mm²
0.08-10
Weight
kg
0.975
Pack.
qty
6
Crimping pliers
"Abiko" For crimping end sleeves. With 5 different slots for different end sleeve sizes. With automatic ratchet device
that prevents the pliers from being opened before the correct crimping force has been applied. Compound action function. Plastic covered handles.
Art. no.
0531
-0107
Abiko
No
DEB 0560
Length
mm
190
For conductor area (5 slots)
mm²
0.5 0.75 1.0 1.52.5 4.0 6.0
Weight
kg
0.35
Pack.
qty
1
379
End sleeve pliers
Hand tools
4
"Abiko" For crimping end sleeves. Front feed for best accessibility. With automatic ratchet device that prevents the
pliers from being opened before the correct crimping force has been applied. Compound action function. Plastic covered
handles.
Art. no.
0643
-0102
Abiko
No
KEBS-0560
Length
mm
220
For conductor area
mm²
0.5-6.0
Pack.
qty
1
End sleeve pliers
"Abiko" Tool for industrial use for crimping end sleeves. Front feed for best accessibility. With automatic ratchet
device that prevents the pliers from being opened before the correct crimping force has been applied. With compound
action function. Ergonomic two component handle.
Art. no.
11223
-0107
Abiko
No
DEBS0340
Length
mm
197
For conductor area
mm²
0.25-4
Pack.
qty
1
End sleeves
Insulated
End sleeve - insulated
"Abiko" For crimping cable ends. The raw material is made up of tinned electrolytic copper - polypropylene insulation
with colour marking for each conductor area.
Art. no.
0571
-0207
-0405
-0504
-0603
Abiko
No
A 0.75-8 EW
A 1.0-8 EW
A 1.5-8 EW
A 1.5-10 EW
Colour
White
Yellow
Red
Red
For conductor area
mm²
0.75
1.0
1.5
1.5
Sleeve uninsulated length
mm
8
8
8
10
No. per
pack.
500
500
500
500
Pack.
f
1
1
1
1
Art. no.
0571
-0702
-0801
-0900
-1007
Abiko
No
A 2.5-8 EW
A 2.5-12EW
A 4.0-12 EW
A 6.0-12 EW
Colour
Blue
Blue
Grey
Black
For conductor area
mm²
2.5
2.5
4.0
6.0
Sleeve uninsulated length
mm
8
12
12
12
No. per
pack.
500
500
100
100
Pack.
f
1
1
1
1
End sleeve set - insulated
"Abiko" Set containing 900 insulated end sleeves 0.5-6.0 mm², crimping pliers EEB 0160 and stripping pliers 001 (for
cutting and stripping cable areas up to 6 mm²). Supplied in plastic case.
Art. no.
0564
-0107
Abiko
No
PL 900 ET
Contents:End sleeves for cable area
mm²
0.5-6.0
Crimping pliers
No
EEB 0160
Stripping pliers
No
001
Pack.
qty
1
380
Please quote the
Crimp system pliers
"Knipex" Pliers for exchangeable crimp profiles. Can be used for virtually all crimping applications. Adjustable crimping
pressure. Angle lever - for one or two hand operation. Self releasing mechanism for crimping pressure. Plastic covered
handles. Supplied without crimp inserts.
Art. no.
3305
-0105
Knipex
No
9743
For cable diam.
mm²
0.08-5
Length
mm
200
Pack.
qty
1
KnipexFor applications
Capacity
Art. no.
Pack.
no
9749mm²
3305
qty
04
Uninsulated flat pin 2.8 + 4.8 mm
0.1-2.5
-0204
1
05
Uninsulated flat pin 4.8 + 6.3 mm
0.5-6
-0303
1
06
Insulated terminals
0.5-6
-0402
1
13
Uninsulated terminals
0.5-10
-0501
1
08
End sleeves
0.5-6
-0600
1
09
End sleeves
10/16/25
-0709
1
19
End sleeves
35-50
-0808
1
24
D-sub plugs
0.08-0.56
-0907
1
30
Connector
2.5-10
-1004
1
40
COAX connector
RG 58, 59, 62, 71
-1103
1
60
Turned connectors
0.14-4
-1202
1
70
Modular connector
4/6/8-pole
-1301
1
Locator
3305
-1400
-1509
-1608
Knipex-no
974990
94
95
For crimp profile
974960
04
05
Pack.
qty
1
1
1
Hand tools
Crimp system pliers
4
Crimp system pliers
"Abiko" This crimping tool is developed for industrial users that take the tool with them to the work site. Installers
and service personnel that demand a good tool receive here everything in one. The replaceable crimping jaws create
the freedom to choose an adapted "kit" for both general and very specific requirements. The tool features parallel crimping action and is tested for 20000 cycles and 10000 N crimping force. Switch jaws with a simple action without extra
tools. (4-clicks, press down the catch and change.) The jaws are stored in an adapted holder that can be kept together
The pliers are supplied with crimping jaws OAA0525 and OEB0210.
Art. no.
13179
-0107
Abiko
type
Mobile
Length
mm
234
Height
mm
64
Weight
g
460
Pack.
qty
1
Abiko
Tray
Used for
Crimping jaws
Art. no.
Pack.
No
No
13179
qty
OAA0160 4301-3128 For asymmetrical crimping of insulated splices 0.1-6 mm²
-0206
1
OAA0525 4301-3129 For asymmetrical crimping of insulated splices 0.5-2.5 mm²
-0305
1
OCC0908 4301-3129 For crimping coaxial connectors, RG 174, RG 179
-0404
1
OCC1113 4301-3136 For crimping coaxial connectors, RG 58, 59, 62 and 71
-0503
1
OCC4755 4301-3138 For crimping coaxial connectors RG 6, RG 59 and CATV
-0602
1
OEB0210 4301-3127 For crimping receptacles 0.25-10 mm²
-0701
1
OEB1625 4301-3153 For crimping receptacles 16-25 mm²
-0800
1
OEB3550 4301-3154 For crimping receptacles 35-60 mm²
-0909
1
OFO5432 4301-3141 For crimping fibre optic splices
-1006
1
OKB0560 4301-3142 For pierce crimping non insulated splices 0.5-6 mm²
-1105
1
OKB0725 4301-3137 For pierce crimping non insulated splices 0.75-2.5 mm²
-1204
1
OMP11
4301-3132 For crimping modular plugs RJ 11
-1303
1
OMP45
4301-3144 For crimping modular plugs RJ 45
-1402
1
OPB0140 4301-3147 For crimping global power connectors, GPC-connector
-1501
1
OPB6099 4301-3148 For crimping global power connectors, GPC-connector
-1600
1
ORB0110 4301-3150 For roll crimping non insulated splices 0.1-1.0 mm²
-1709
1
ORB0560 4301-3146 For roll crimping non insulated splices 0.5-6 mm²
-1808
1
OWB4099 4301-3139 For W-crimping non insulated splices 4-10 mm²
-1907
1
381
Hand tools
4
Crimping tool set
Crimping tool set
"Teng Tools" Set consists of a crimping tool with three exchangeable heads for insulated and non insulated terminals
and a 2.5 mm hex key.
Art. no.
12247
-0107
Teng Tools
No
TTCP04
Head for insulated terminals
mm²
0.324-5.261
Head for non insulated terminals
mm²
0.324-3.31
Head for insulated terminals
mm²
0.3-8
Case size LxWxH
mm
265x142x50
Weight
kg
0.8
Pack.
sts
1
Spare head for crimp system pliers
"Teng Tools" Three spare heads for crimp system pliers CP04.
Art. no.
12247
-0206
Teng Tools
No
CP04RK1
mm²
0.324-5.261
mm²
Pack.
sts
10
-0305
CP04RK2
0.324-3.21
10
-0404
CP04RK3
0.3-8
10
Crimping pliers for copper splices
For copper splices
"Abiko" Pliers for crimping copper splices 4-16 mm². Fitted with ratchet function. Specially suitable for electricians in
the field. Pliers equipped with plastic covered handles.
Art. no.
3663
-0101
Abiko
No
T 2258
Length
mm
300
For copper splices
mm²
4-16
Weight
kg
0.6
Pack.
qty
1
"Abiko" Pliers for crimping copper splices 10-70 mm². Fitted with ratchet function. With plastic covered handles.
Art. no.
3664
-0100
Abiko
No
T 3165 A
Length
mm
500
For copper splices
mm²
10-70
Press force
kN (t)
35 (3.5)
Weight
kg
2.8
Pack.
qty
1
Terminals
For copper splices
Terminal for copper splices
Art. no.
Abiko
For copper wire
Int. diameter
Mounting hole diameter
Total length
No. per pack.
Pack.
382
"Abiko" Pipe terminals of electrolytic copper, tinned, with inspection hole. For all types of all copper wire, such as
multi-strand, single-strand and round solid conductors (PEX). More sizes with pin holes M5-M8 available on special order.
3668
-0106
-0205
-0304
-0403
-0502
-0601
No
KR10-8
KRF16-10
KRF25-10
KRF35-10
KRF50-10
KRF70-12
mm²
10
16
25
35
50
70
mm
5
6
8
9
11
13
mm
8.5
10.5
10.5
10.5
10.5
13
mm
33
38
42
45
50
58
ea.
100
100
100
100
100
50
f
1
1
1
1
1
1
Please quote the
Hand tools
Cable tie straps
Cable tie straps
"Abiko" Type Ty-Loc. For simple wrapping of cable trunks. Apply the cable tie around the cable trunks, tighten and
cut. Available in transparent or black weatherproof design. The forward section of the tie is bent to enable mounting
and prevent misuse.
Abiko
No
L-2.5-100
L-2.5-100 UV
L-3.5-215
L-3.5-215 UV
L-3.5-145
L-3.5-145 UV
L-4.7-195
L-4.7-195 UV
L-4.7-285
L-4.7-285 UV
Type
Transp.
Black
Transp.
Black
Transp.
Black
Transp.
Black
Transp.
Black
Cablediam.
Tiewidth
Tielength
Max.
tensile
strength
mm
2-18
mm
2.5
mm
102
8
kg
2-51
3.3
217
8
2-44
3.3
145
18
2-44
4.7
180
22
2-76
4.7
282
22
Art. no.
3660
-0104
-0203
-0153
-0252
-0500
-0609
-0708
-0807
-0906
-1003
Large pack
Quantity Quantity
tie
per
pack.
f
100
1
100
1
100
1
100
1
100
1
100
1
100
1
100
1
100
1
100
1
Art. no.
5171
-0101
-0200
-0309
-0408
-0507
-0606
-0705
-0804
-
4
DIY-pack
Quantity
tie
per
DIY-pack
25
25
25
25
25
25
25
25
-
Pack.
ea.
10
10
10
10
10
10
10
10
-
Cable tie straps
"Abiko" Type Ty-Rap. For simple wrapping of cable trunks etc. Apply the cable tie around the cable trunks, tighten
and cut. Unique locking tongue of stainless acid-resistant steel provides superior locking capacity in all situations. With
ribs and nuts to keep the ties in place without rotating or sliding.
White - for indoor use.
Black - for outdoor use.
Abiko
No
TY-523 MR
TY-523 MXR
TY-524 MR
TY-524 MXR
TY-525 MR
TY-525 MXR
TY-528 MR
TY-528 MXR
Colour
Tiewidth
mm
white
black
white
black
white
black
white
black
2.4
2.4
3.6
3.6
4.8
4.8
4.8
4.8
Cablediam.
mm
2-16
2-16
2-29
2-29
4-45
4-45
4-102
4-102
Tielength
Max.
tensile
strength
kg
mm
92
92
140
140
186
186
360
360
8
8
18
18
22
22
22
22
Art. no.
0646
-0109
-0208
-0307
-0406
-0505
-0604
-0703
-0802
Quantity
tie
per
pack.
100
100
100
100
100
100
100
100
Quantity
f
1
1
1
1
1
1
1
1
Assembly tools
Assembly tool for cable ties
"Abiko" Light and versatile plastic tool for tightening cable ties.
Art. no.
0634
Abiko
No
For tie widths
mm
Pack.
qty
-0103
WT1-TB
2.5-5
1
"Abiko" For cable ties Powerful model with adjustable tightening torque that cuts the tie after tightening.
Art. no.
0572
-0107
Abiko
No
F-301
Adjustable tightening torque
kg
4-11
For tie widths
mm
2.5-4.8
Pack.
qty
1
"Abiko" Ergonomic, effective and very user-friendly cable tie tool. The tool is designed for professional applications
with a focus on the least possible loads with continuous and long term use. The head can be rotated 360° for optimal
accessibility. Very easy and quick adjustment of the tightening torque which can also be locked for constant torque. Kickless cutting of cable tie.
Art. no.
15062
-0102
-0201
Abiko
No
ERG 50
ERG 120
For strap widths
mm
2.4-4.8
4.8-7.6
Tensile strength
N
80-220
130-280
Weight
g
373
391
Pack.
qty
1
1
383
Hand tools
4
Rivet guns - Rivets - Screws
Rivet guns
Riveting tool
"Teng Tools" Body - heavy steel plate. Supplied with 3 nose bushes and plastic covered handles.
Art. no.
11682
-0101
Teng Tools
No
HR14
For aluminium rivets
mm
2.4/3.0/3.2 4.0 4.8/5.0
For steel rivets
mm
2.4/3.0/3.2 4.0 4.8/5.0
Length
mm
270
Weight
kg
0.63
Pack.
qty
10
Riveting tool
"Teng Tools" Intended for handicrafts and industry. Plastic covered handles. Supplied with 4 nose bushes for rivets
2.4, 3.2 4.0 and 4.8 mm.
Art. no.
6907
-0100
Teng Tools
No
HR01
Length
mm
250
For rivet
mm
2.4 3.2 4.0 4.8
Pack.
qty
10
Riveting tool
"Teng Tools" For professional use in construction and industrial applications with 4 nose bushes (for rivets 2.4, 3.2,
4.0 and 4.8 mm) and plastic covered handles.
Art. no.
15173
-0108
Teng Tools
No
HR30R
For rivets
mm
2.4 3.2 4.0 4.8
Weight
kg
0.56
Pack.
Set of 4 nose bushes
4849
-2102
Pack.
sts
1
Spare part set (jaws, charger, spring)
4849
-2201
Pack.
sts
1
Riveting tool
"Emhart" For professional use in construction and industrial applications. Unique lever link that reduces the required
hand force. Ergonomic design with rubber cover handles. Dampened merging of the handles when the rivet mandrel
breaks. For up to 4.8 mm aluminium rivet. Supplied with 4 nose bushes and spanner.
Nose bush set. 4 extra nose bushes for rivets 2.4, 3.2, 4.0 and 4.8 mm.
Spare part set. Containing jaws, jaw guide, spring, locking screw and plastic knob.
Rivet gun
10066
-0109
Emhart
type
Powerlink 30
Supplied with nose bush for rivet
mm
2.4 3.2 4.0 4.8
Pack.
qty
5
Nose bush set
10066
-0208
Pack.
sts
1
Spare part set
10066
-0307
Pack.
sts
1
Rivet gun
"Teng Tools" For professional use in construction and industrial applications. 3 jaws, giving a better grip and release
of the nail. Lattice design gives large riveting force and is very suitable for use in areas difficult to access. Long nose for
good access. With 5 nose bushes (for rivet dim. 3.2, 4.0, 4.8, 6.0 and 6.4 mm) and plastic covered handles.
Spare part set. Contains jaws, jaw guide and spring.
Rivet gun
11687
-0106
Teng Tools
No
HRLT01
Max. rivet dim. al-rivet
mm
6.4
Max. rivet dim. steel
mm
6.4
Max. rivet dim. stainless
mm
6.4
Length
mm
320-830
Weight
kg
2.0
Pack.
qty
1
Nozzle set (5)
11308
-0204
Pack.
sts
1
Spare part set
11308
-0303
Pack.
sts
1
384
Please quote the
"Teng Tools" For professional use in construction and industrial applications. Two-hand grip gives large riveting capacity. 3 jaws, giving a better grip and release of the nail. With collector for the mandrels, 5 nose bushes (for rivet dim.
3.2, 4.0, 4.8, 6.0, 6.4 mm) and plastic covered handles.
Spare part set. Contains jaws, jaw guide and spring.
Rivet gun
11691
-0100
Teng Tools
No
HRLR01
Max. rivet dim. al-rivet
mm
6.4
Max. rivet dim. steel
mm
6.4
Max. rivet dim. stainless
mm
6.4
Length
mm
535
Weight
kg
1.7
Pack.
qty
1
Nozzle set (5)
11308
-0204
Pack.
sts
1
Spare part set
11308
-0303
Pack.
sts
1
Hand tools
Rivet gun
4
Set
Rivet gun with blind rivets in a set
"Teng Tools" Set containing one rivet gun with four nose bushes as well as 80 assorted rivets (20 each of 2.4, 3.2, 4.0
and 4.8 mm). Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
6921
-0102
Teng Tools
No
TTHR81
With nose bushes
mm
2.4 3.2 4.0 4.8
Quantity rivets
80
Length of gun
mm
250
Case size LxWxH
mm
265x142x50
Weight
kg
0.95
Pack.
set
1
Rivet guns, pneumatic
Pneumatic
Rivet gun - pneumatic
Hydro-pneumatic rivet guns. Supplied with 5 nose bushes (for rivets 2.4, 3.2, 4.0, 4.8 and 6.4 mm), hose nipple 3/8" and
a pair of extra jaws as well as spanners for changing the nose bushes.
Art. no.
8016
-0153
-0203
Orig. no
TAR-65
TAR-65-VS
For aluminium and steel rivets
mm
2.4-6.4
2.4-6.4
For stainless steel rivets
mm
2.4-4.8
2.4-4.8
Pintail suction
without
with
Stroke length
mm
13
13
Working pressure
bar
5.5-6
5.5-6
Air consumption/rivet
l
0.26
0.4
For hose
inch
3/8
3/8
Weight
kg
1.5
2.0
Pack.
qty
1
1
Extra nozzle
8016
-0302
-0401
-0500
-0609
For rivet
mm
2.4
3.2
4.0
4.8
Pack.
qty
1
1
1
1
Extra jaws
8016
-0708
Pack.
p
1
Extra nose
8016
-0807
Pack.
qty
1
385
Hand tools
4
Hydro-pneumatic rivet gun with aluminium gun housing. Supplied with 4 nose bushes (for rivets 2.4, 3.2, 4.0 and 4.8 mm),
hose nipple 3/8" and a pair of extra jaws as well as spanners for changing the nose bushes.
Art. no.
7451-0108
8016-0104
Orig. no
TAR-50
TAR-50-VS
For rivets (incl. stainless steel rivets)
mm
2.4-4.8
2.4-4.8
Pintail suction
without
with
Stroke length
mm
13
13
Working pressure
bar
5.5-6
5.5-6
Working pressure
kPa
550-600
550-600
Air consumption
l
0.3
0.26
For hose
inch
3/8
3/8
Weight
kg
1.5
1.5
Pack.
qty
1
1
Extra nozzle
7451
-0207
-0306
-0405
-0504
-0553
For rivet
mm
2.4
3.2
4.0
4.8
6.4
Pack.
qty
1
1
1
1
1
Extra jaws
7451
-0603
Pack.
p
1
Extra nose
7451
-0702
Pack.
qty
1
"Emhart" A small and lightweight hydraulic pneumatic professional machine with exceptionally high pulling force.
Quick connect nose section, jaw guide and mandrel collector. Extra long nose section of 127 mm gives improved reach.
Compatible with POP rivet feeder (RP). Basic service performed without tools. Quick one-hand air shutoff combined
with swivel function. Equipped with mandrel collector.
Supplied with nose bushes for 2.4, 3.2 and 4.0 mm rivets.
Art. no.
14438
-0102
Emhart
No
ProSet 1600 MCS
For rivet
mm
2.4, 3.0, 3.2, 4.0
Stroke length
mm
18
Working pressure
bar
5.0-6.9
Height
mm
227
Net weight
kg
1.04
Pack.
qty
1
Rivet gun
"Emhart" Hydro-pneumatic. Large drawing force and suitable for all dimensions up to 4.8 mm. The guns have few
moving parts, i.e. minimal service requirement. Supplied with three different nose bushes for different rivet dimensions
and 2 meter connection hose.
ProSet 2100 MCS. With mandrel collector.
ProSet 2100. Without mandrel collector.
Art. no.
12763
-0101
(-0200)
Emhart
No
ProSet 2100 MCS
ProSet 2100
mm
2.4-4.8
2.4-4.8
Stroke length
mm
17
17
Working pressure
bar
5.9-6.2
5.9-6.2
Height
mm
281
281
Connection hose int.
mm
5
5
Net weight
kg
1.68
1.5
Pack.
qty
1
1
Rivet gun
"Emhart" Hydro-pneumatic. Quick connect nose section and jaw guide.
ProSet 2500 MCS with mandrel collector.
ProSet 2500 without mandrel collector.
Art. no.
15140
-0108
Emhart
Nr
ProSet 2500 MCS
mm
3.0/3.2/4.0/4.8
Stroke length
mm
18
Height
mm
259
Weight
kg
1.31
Pack.
-
386
Please quote the
-0207
ProSet 2500
3.0/3.2/4.0/4.8
18
259
1.20
-
"Emhart" Hydro-pneumechanical. Large drawing force and suitable for all dimensions up to 6.4 mm. The gun has few
moving parts, i.e. minimal service requirement. Supplied with three different nose bushes for different rivet dimensions
and 2 meter connection hose.
Art. no.
12764
-0100
Emhart
No
MCS5400
mm
2.4-6.4
Working pressure
bar
5.8
Height
mm
306
Connection hose int.
mm
5
Net weight
kg
2.25
Pack.
qty
1
Hand tools
Rivet gun
4
Rechargeable (cordless)
Rivet gun, rechargeable
"Emhart" The tool gives powerful riveting performance wherever required. The powerful battery pack has a capacity
for riveting up to 1900 riveted joints per charge. Very practical tool due to its ergonomically well balanced design, low
noise level and the lack of compressed air connections or mains cord.
Suitable for building sites, service and maintenance work and as an alternative in production lines.
Features mandrel collector and battery indicator. Supplied complete with battery, charger, 4 nose bushes for rivet dimensions. 2.4, 3.2, 4.0 and 4.8 mm, assembly spanner and fitted metal case with carrying handle.
Art. no.
0846
-0107
Emhart
No
MCS-5800
For rivet
mm
2-4 - 4.8
Stroke length
mm
20
Power pack
V
12
Charging time
approx h
1
Capacity per charge 2.4 al. rivets
quantity
1900
Capacity per charge 4.0 mm steel rivets
quantity
900
Height incl. battery
mm
300
Vibration
m/s²
<2.5
Sound level
dB (A)
78.5
Net weight
kg
2.2
Pack.
qty
1
Extra battery
0846
-0206
Orig. no
MCS-40
Pack.
qty
1
Spare parts
Spare parts for riveters
Spare part
type
Jaw holder
Jaws
Jaw guide
Compression spring
Handle spring
Orig.No
THB-30-3
THB-30-5
THB-30-4
THB-30-14
For riveters 9913-0106
Art. no.
9913-1005
9000-1009
9913-1203
9913-1104
9913-1302
Pack.
qty
1
1
1
1
1
Spare parts Emhart
Spare parts for Emhart rivet guns.
"Emhart" Spare parts for Emhart rivet guns.
Part
Jaws (set)
Jaws maxmax.(max. 4.8 mm rivet
Jaws maxmax.(max. 6.4 mm rivet
Jaw holder
Jaw guide
Jaw guide for 4.8 mm rivets
Jaw guide for 4.8 mm rivets
Spring
Nose bush for 2.4 mm rivets
Nose bush for 2.8 and 3.2 mm rivets
For PRO Set 2100 MCS
and PRO Set 2100
Orig.Art. no.
Pack.
no
qty
13300
12763-1000
1
14913
12763-1109
1
15582
12763-1208
1
16290
12763-1307
1
17595
12763-1406
1
16216
0959-0159
1
16214
0959-0209
1
17623
12763-1505
1
-
For MCS 5400
Orig.no
18407
11446
19250
18506
18557
16216
16214
17623
16546
Art. no.
12764-1108
12764-1207
12764-1009
12764-1306
12764-1405
0959-0159
0959-0209
12763-1505
(0959-0506)
Pack.
qty
1
1
1
1
1
1
1
1
1
387
Hand tools
4
Pop-rivets
Aluminium-rivets
Aluminium-rivet
Emhart
No
TAPD 33
TAPD 36
AD 34
TAPD 42
TAPD 44
TAPD 46
TAPD 48
TAPD 410
TAPD 412
TAPD 414
TAPD 416
TAPD 418
TAD 425
TAPD 52
TAPD 54
TAPD 56
TAPD 58
TAPD 510
TAPD 512
TAPD 514
TAPD 516
TAPD 517
TAPD 520
TAPD 64
TAPD 66
TAPD 68
TAPD 610
TAPD 612
TAPD 614
TAPD 617
AD 610
TAPD 625
TAPD 633
TAPD 640
MAP 6200
AD 86
TAPD 816
TAPD 824
"Emhart" Aluminium rivets TAP/D-BS (with steel mandrel).
Please state the number of packages when ordering.
Rivet
Rivet
Total
Suitable
diam.
length
material
drill
thickness
diam.
mm
mm
mm
mm
2.4
5.0
0.8-2.4
2.5
7.5
2.5-4.8
9.5
4.6-6.4
3.2
4.5
0.5-1.6
3.3
6.0
1.6-3.2
8.0
3.2-4.8
9.5
4.8-6.4
11.5
6.4-7.9
13.5
7.9-9.5
15.0
7.9-11.1
17.0
11.1-12.7
18.5
12.7-14.3
24.0
16.6-20.7
4
5.0
0.5-1.6
4.1
7.0
1.6-3.2
8.5
3.2-4.8
10.5
4.8-6.4
12.0
6.4-7.9
14.0
7.9-9.5
15.5
9.5-11.1
17.5
11.1-12.7
18.5
12.7-13.5
20.0
13.5-15.9
4.8
7.5
2.3-3.2
4.9
9.0
3.3-4.8
11.0
4.8-6.4
12.5
6.4-7.9
14.5
7.9-9.5
16.5
9.5-11.1
19.0
11.1-13.5
21.0
13.5-15.9
25.5
15.9-19.9
32.0
19.9-26.2
38.0
26.2-32.8
50.0
34-41.0
6.4
15.5
7.5-9.5
6.5
19.5
6.5-12.7
26.0
15.9-19.0
Art. no.
5105
-0102
-0201
-0250
-0300
-0409
-0508
-0607
-0706
-0839
-0656
-0854
-0953
-1001
-1100
-1209
-1308
-1407
-1506
-1605
-1704
-1803
-1852
-1878
-2009
-2108
-2207
-2306
-2405
-2504
-2603
-2702
-2900
-3007
-3122
-3163
-3171
-3205
-3304
Retail pack
Quantity
each
per pack.
500
500
500
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
1000
1000
1000
1000
1000
1000
500
500
500
500
500
500
500
500
500
500
500
500
500
500
250
250
500
500
500
Pack.
f
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Aluminium-rivet
Emhart
No
TAP 46
TAP 46
TAP 46
TAP 48
TAP 48
TAP 48
TAP 410
TAP 410
-
388
"Emhart" Coloured aluminium rivet TAP/D-BS (with steel mandrel).
Colour
Rivet
Rivet
Total
Suitable
diam.
length
material
drill
Art. no.
thickness
diam
mm
mm
mm
mm
3259
White¹)
3.2
8.0
3.2-4.8
3.3
-0101
Brown
-0150
Black²)
-0200
White¹)
9.5
4.8-6.4
-0309
Brown
-0358
Black²)
-0408
White¹)
11.5
6.4-7.9
-0507
Black²)
-0606
Black²)
4.0
10.5
4.8-6.4
4.1
-0705
White¹)
-0804
Please quote the
Retail pack
Quantity
each
per pack
500
500
500
500
500
500
500
500
500
500
Pack.
f
1
1
1
1
1
1
1
1
1
1
Aluminium-rivet with aluminium mandrel
"Emhart" Aluminium rivets AD/ABS (with aluminium mandrel).
Emhart
Rivet
Rivet
Total
diam.
length
material
thickness
No
AD 32
AD 34
AD 42
AD 43
AD 44
AD 45
AD 46
AD 48
AD 52
AD 53
AD 54
AD 56
AD 58
AD 62
AD 64
AD 66
AD 68
AD 610
AD 612
mm
2.4
mm
6.0
9.0
6.5
8.0
9.5
11.0
13.0
16.0
7.0
9.0
10.0
13.5
16.7
8.0
11.0
14.0
17.0
20.5
23.5
3.2
4
4.8
Suitable
drill
diam.
mm
0.5-3.2
3.3-6.4
1.7-3.2
3.3-4.8
4.9-6.4
6.5-7.9
8.0-9.5
9.6-12.7
0.5-3.2
3.3-4.8
3.4-6.4
6.5-9.5
9.6-12.7
0.5-3.2
3.3-6.4
6.5-9.5
9.6-12.7
12.8-15.9
16.0-19.1
Art. no.
mm
2.5
5106
-0028
-0044
-0101
-0200
-0309
-0408
-0507
-0556
-0580
-0598
-0606
-0705
-0804
-0903
-1000
-1109
-1208
-1307
-1406
3.3
4.1
4.9
Retail pack
Quantity
each
per pack.
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
Pack.
Hand tools
Aluminium-rivets with aluminium mandrel
4
f
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Aluminium rivets with countersunk head
Aluminium rivet with countersunk head
"Emhart" Aluminium rivets with countersunk head 120° and steel mandrel.
Emhart
Rivet
Rivet
Max.
Head
diam.
length
grip
diameter
No
TAPK 44 BS
TAPK 46 BS
TAPK 48 BS
TAPK 54 BS
TAPK 58 BS
TAPK 614 BS
mm
3.2
mm
7.5
9
11
8.5
12
18.2
4
4.8
mm
4.3
5.8
7.4
4.5
7.7
12.7
mm
6.5
Suitable
drill
diameter
mm
3.3
8
4.1
9.5
4.9
Art. no.
11880
-0101
-0200
-0309
-0408
-0507
-0606
Quantity
each
per
pack.
500
500
500
500
500
500
Pack.
f
1
1
1
1
1
1
Monel-rivets
Monel-rivet
"Emhart" Monel-rivet (nickel-copper alloy) TLP/D-BS (steel mandrel).
Emhart
Rivet
Rivet
Total
diam.
length
material
thickness
No
TLP 419¹)
TLED 424¹)
TLED 429¹)
TLED 435¹)
TLED 440¹)
TLED 530¹)
TLED 537¹)
TLED 540
TLPD 636¹)
TLPD 639¹)
TLPD 650¹)
TLPD 665¹)
TLPD 675¹)
TLPD 850
mm
3.2
4
4.8
6.4
mm
4.8
6.0
7.5
9.0
10.0
7.5
9.5
10.0
9.0
10.0
12.5
16.5
19.0
12.7
mm
0.5-1.8
1.9-3.0
3.1-4.3
4.4-5.8
5.9-7.1
2.6-4.1
4.2-5.8
5.9-6.6
3.9-5.1
5.2-5.8
5.9-8.6
8.7-12.4
12.5-15.0
3.9-7.6
Suitable
drill
diam.
mm
3.3
4.1
4.9
6.5
Art. no.
5107
-0308
-0407
-0506
-0605
-0704
-1009
-1108
-1207
-1603
-1702
-1801
-1900
-2007
-2106
Retail pack
Quantity
each
per pack.
500
500
500
500
500
500
500
500
500
500
500
500
500
500
Pack.
f
1
1
1
1
1
1
1
1
1
1
1
1
1
1
389
Hand tools
4
Steel rivets
Steel rivets
"Emhart" Steel rivets TSP/D-BS (SS-BS) (with steel mandrel).
Rivet
Rivet
Total
Suitable
diam.
length
material
drill
thickness
diam.
mm
mm
mm
mm
3.2
6.0
1.6-3.2
3.3
8.0
3.2-4.8
9.5
4.8-6.4
13.5
7.9-9.5
4
7.0
1.3-3.2
4.1
8.5
3.2-4.8
10.5
4.8-6.4
12.0
6.4-7.9
4.8
12.5
6.4-7.9
4.9
Emhart
No
TSPD 44
TSPD 46
TSPD 48
TSPD 412
TSPD 54
TSPD 56
TSPD 58
TSPD510
TSPD 610
Art. no.
5108
-0208
-0307
-0406
-0505
-0703
-0802
-0901
-1008
-1206
Retail pack
Quantity
each
per pack.
1000
1000
1000
1000
1000
1000
1000
1000
500
Quantity
f
1
1
1
1
1
1
1
1
1
Stainless steel rivets
Stainless steel rivet
"Emhart" Stainless steel rivets SS-D/SS-BS (with stainless steel mandrel).
Rivet
Rivet
Total
Suitable
diam.
length
material
drill
Art. no.
thickness
diam.
mm
mm
mm
mm
5109
3.2
6.5
1.6-3.2
3.3
-0058
8.5
3.3-4.8
-0207
10.0
4.9-6.4
-0306
13.0
6.5-9.5
-0322
4.0
7.0
1.6-3.2
4.1
-0348
10.5
3.3-6.4
-0363
13.5
6.5-9.5
-0389
4.8
8.0
1.6-3.2
4.9
-0397
11.0
3.3-6.4
-0405
14.0
6.5-9.5
-0504
17.5
9.5-12.7
-0603
Emhart
No
SSD 42
SSD 43
SSD 44
SSD 46
SSD 52
SSD 54
SSD 56
SSD 62
SSD 64
SSD 66
SSD 68
Retail pack
Quantity
each
per pack.
500
500
500
500
500
500
500
500
500
500
500
Pack.
f
1
1
1
1
1
1
1
1
1
1
1
Brake lining rivets
Brake lining rivet
Emhart
No
TSPK 870 BS 150(D
"Emhart" Steel rivets with countersunk head 150° and steel mandrel. Intended for Volvo trucks.
Rivet
Rivet
Max.
Head
Applic.
Art. no.
Quantity
diam.
length
grip
diam.
drill
per
diam.
pack.
mm
mm
mm
mm
mm
12201
6.4
20
13.5
12
6.5
-0200
250
Pack.
pkt
1
Brake lining rivet
Emhart
No
TSPH 870 BSLS
SD 88 BS-42
390
"Emhart" Steel rivets with dome heads and steel mandrel. Intended for Scania trucks.
Rivet
Rivet
Max.
Head
Applic.
Art. no.
diam.
length
grip
diam.
drill
diam.
mm
mm
mm
mm
mm
12202
6.4
18
12.7
11
6.5
-0100
6.4
18.5
12.7
12.5
6.5
-0209
Please quote the
Quantity
per
pack.
500
500
Pack.
pkt
1
1
Hand tools
Closed-end
Aluminium-rivet - closed-end
"Emhart" Aluminium-rivets AD with steel mandrel. Differ from standard POP-rivets as the mandrel head is fully integrated in the rivet. In this way it becomes a closed-end blind rivet and withstands a pressure of at least 35 kp/cm².
Closed-end rivets have a very large radial expansiveness and in this way fill rivet holes that are normally too large. It also
offers greater strength than other blind rivets and has large resistance to corrosion.
Emhart
Rivet
Rivet
Total
Suitable
Retail pack
diam.
length
material
drill
Art. no.
Quantity
thickness
diam.
each
No
mm
mm
mm
mm
5112
per pack.
AD 42
3.2
6.0
0.8-1.6
3.3
-0103
500
AD 44
7.5
1.7-3.2
-0202
500
AD 46
9.0
3.3-4.8
-0301
500
AD 48
11.0
4.9-6.4
-0400
500
AD 410
12.0
6.5-7.9
-0509
500
AD 54
4
8.0
1.5-3.2
4.1
-0608
500
AD 56
9.5
3.3-4.8
-0707
500
AD 58
11.0
4.9-6.4
-0806
500
AD 510
12.5
6.5-7.9
-0905
500
AD 64
4.8
8.0
1.5-3.2
4.9
-1002
500
AD 66
10.0
3.3-4.8
-1101
500
AD 68
11.5
4.9-6.4
-1200
500
AD 610
13.0
6.5-7.9
-1309
500
AD 612
14.5
8.0-9.5
-1408
500
AD 616
18.0
9.6-12.7
-1507
500
AD 620
22.0
12.8-15.9
-1556
500
AD 84
6.4
13.0
4.7-6.4
6.5
-1606
500
AD 86
16.0
6.5-9.5
-1705
500
4
Pack.
f
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Stainless steel rivets - closed end
"Emhart" Stainless steel rivets TD/SS (with stainless steel mandrel).
Emhart
Rivet
Rivet
Total
diam.
length
material
thickness
No
mm
mm
mm
td 64
4.8
9.2
1.5-3.2
td 68
4.8
12.5
4.9-6.4
Suitable
drill
diam.
mm
4.9
Art. no.
3260
-0306
-0405
Retail pack
Quantity
each
per pack.
500
500
Pack.
f
1
1
With large head
Aluminium-rivet with large head
"Emhart" Aluminium rivet TAP/D-LF with steel mandrel. Dome head with large diameter. For soft and elastic materials e.g. rubber strips.
Emhart
Rivet
Rivet
Total
Suitable
Art. no.
Quantity
diam.
length
material
drill
per
thickness
diam.
No
mm
mm
mm
mm
1059
pack.
TAPD 58
4.0
10.3
4.1-6.4
4.1
-0503
500
TAPD 512
13.9
7.9-9.5
-0701
500
TAPD 68
4.8
10.9
4.8-6.4
4.9
-0800
500
TAPD 610
12.7
6.4-8.0
-0909
500
TAPD 614
16.3
9.7-11.2
-1006
500
TAPD 625
25.4
19-20.1
-1105
500
Quantity
f
1
1
1
1
1
1
Multigrip-rivets
Flex-rivet
"Emhart" Aluminium rivet EBD with steel mandrel. With large deformation area used with frequently varying material
thicknesses. Dome head.
Emhart
Rivet
Rivet
Total
Suitable
Art. no.
Quantity
diam.
length
material
drill
per
thickness
diam.
No
mm
mm
mm
mm
1082
pack.
EBD 508
4.0
10.3
1.2-6.4
4.1
-0306
1000
EBD 512
4.0
14.0
4.8-9.6
4.1
-0405
500
EBD 608
4.8
11.0
1.6-6.4
4.9
-0504
500
EBD 614
4.8
16.5
4.0-11.1
4.9
-0603
500
Quantity
f
1
1
1
1
391
Hand tools
4
Blind rivet nuts
Assembly tool
"Teng Tools" For use in construction and industrial applications Fitted with drawing punches and nose bushes for
four different blind rivet nuts. Plastic covered handles.
Art. no.
11692
-0109
Teng Tools
No
HN02
With nose bushes for blind rivet nuts
thread
M 3, M 4, M 5, M 6
Length
mm
250
Weight
kg
0.6
Pack.
qty
10
"Teng Tools" Set for Blind nuts M 3, M 4, M 5 and M 6 as well as 20 Blind nuts of each size.
Art. no.
10619
-0101
Teng Tools
No
TTNR81
With nose bush for POP-nut
thread
M 3, M 4, M 5, M 6
Rivet sizes (20 of each)
thread
M 3, M 4, M 5, M 6
Case size LxWxH
mm
265x142x50
Weight
kg
1.0
Pack.
qty
1
Assembly tool for blind rivet nuts
"Teng Tools" For professional use in construction and industrial applications. Two-hand grip gives large riveting capacity. Draw-rod with compound action for quick loading and unloading. Mandrel for M5, M6, M8 and M10 included.
Plastic covered handles. Supplied in metal case.
Art. no.
15149
-0109
Teng Tools
No
HRLN65N
Mandrel for threads
M5, M6, M8 M10
Length
mm
530
Weight
kg
1.8
Pack.
Mandrel set M5, M6, M8, M10
11315
-0205
Pack.
sts
1
Assembly tool for blind rivet nuts
Extra drawing punch
Emhart
For thread
Pack.
Extra nozzle
Emhart
For thread
Pack.
392
"Emhart" Hydro-pneumatic assembly tool for Pop-nut. Of steel. Intended for POP-nut M3, M4, M5, M6, M8 M10 and
M12. Well balanced gun grip. All functions in the control handle. Air driven loading and unloading. The tool can be used
horizontally or vertically. The different drawing punches and nose bushes are replaceable for switching between different
thread dimensions. Oil recommendation: Emhart 210, Teressu 52, Harmony Oil C.
Art. no.
5489
(-0108)
-0207
Emhart
No
PNT 200
PNT 812
For drawing punch
thread
M3-M6
M4-M12
Supplied with drawing punch
thread
M4 M5 M6
M6 M8 M10
Working pressure
bar (kPa)
6-7 (600-700)
6-7 (600-700)
Vibration
m/s²
<2.4
<2.4
Ljudnivå
dB(A)
84
84
Air consumption/working moment
l
0.5
0.5
Connection thread
G (R)
¼
¼
Weight
kg
1.2
2.0
Pack.
qty
1
1
For PNT 200
Extra drawing punch
5489
-0306
-0405
-0504
Emhart
No
42832
42833
42834
For thread
M4
M5
M6
Pack.
qty
1
1
1
Extra nozzle
5489
-0603
-0702
-0801
Emhart
No
95458
42507
42508
For thread
M4
M5
M6
Pack.
qty
1
1
1
For PNT 812
5489
-1007
-1106
-1205
-1304
-1403
-1502
No
18706
18707
18708
18709
18710
97153
M4
M5
M6
M8
M 10
M 12
qty
1
1
1
1
1
1
5489
-2005
-2104
-2203
-2302
-2401
-2500
No
18712
18713
18714
18715
18716
97163
M4
M5
M6
M8
M 10
M 12
qty
1
1
1
1
1
1
Please quote the
Blind rivet nuts
"Emhart" Aluminium blind rivets with flat head, M-threads and through hole.
Also available with countersunk head and closed model with flat or countersunk head.
Emhart
Thread
Rivet
Flange
Rivet
Size
diam.
diam.
length
area
No
UPO 30
UPO 45
UPO 30
UPO 55
UPO 30
UPO 55
UPO 30
UPO 55
UPO 35
M4
M4
M5
M5
M6
M6
M8
M8
M 10
mm
6.0
6.0
7.0
7.0
9.0
9.0
11.0
11.0
12.4
mm
10.0
10.0
10.0
10.0
13.0
13.0
16.0
16.0
18.5
mm
10.75
12.25
12.0
15.0
14.5
16.5
16.0
18.0
19.75
mm
0.25-3.0
3.0-4.5
0.25-3.0
3.0-5.5
0.5-3.0
3.0-5.5
0.5-3.0
3.0-5.5
0.8-3.5
Suitable
drill
diameter
mm
6.1
6.1
7.1
7.1
9.1
9.1
11.1
11.1
12.5
Art. no.
Quantity
per
Quantity
1006
-0101
-0200
-0309
-0408
-0507
-0606
-0705
-0804
-0903
pack.
500
500
500
500
500
500
250
250
250
f
1
1
1
1
1
1
1
1
1
Hand tools
Pop-nut, aluminium
4
Pop-nut, aluminium with countersunk head
Blind rivet nuts, aluminium with countersunk head
"Emhart" Aluminium blind rivet with countersunk head, M-threads and through hole.
Emhart
No
UFO 45
UFO 65
AS 60
Thread
M6
M6
M8
Flange
diam.
Rivetlength
Grip
area
mm
12
12
14
mm
17
19
18.5
mm
1.7-4.5
4.5-6.5
4.5-6.0
Suitable
drill
diameter
mm
9.1
9.1
11.1
Art. no.
Quantity
per
Pack.
11882
-0109
-0208
-0307
pack.
500
500
250
f
1
1
1
Pop-nut, steel
Blind rivet nuts
"Emhart" Steel blind rivet nuts with flat head, M-threads and through hole.
Also available with countersunk head and closed model with flat or countersunk head.
Emhart
Thread
Rivet
Flange
RivetGrip
diam.
diam.
length
area
No
UPO 30
UPO 45
UPO 30
UPO 45
UPO 30
UPO 55
UPO 30
UPO 55
UPO 35
UPO 60
M4
M4
M5
M5
M6
M6
M8
M8
M 10
M 10
mm
6.0
6.0
7.0
7.0
9.0
9.0
11.0
11.0
12.4
12.4
mm
10.0
10.0
11.0
11.0
13.0
13.0
16.0
16.0
18.5
18.5
mm
10.75
12.25
12.0
15.0
14.5
16.5
16.0
18.5
19.75
22.75
mm
0.25-3.0
3.0-4.5
0.25-3.0
3.0-5.5
0.5-3.0
3.0-5.5
0.5-3.0
3.0-5.5
0.8-3.5
3.5-6.0
Suitable
drill
diameter
mm
6.1
6.1
7.1
7.1
9.1
9.1
11.1
11.1
12.5
12.5
Art. no.
Quantity
per
Quantity
1007
-0100
-0209
-0308
-0407
-0506
-0605
-0704
-0803
-0902
-1009
pack.
500
500
500
500
500
500
250
250
250
250
f
1
1
1
1
1
1
1
1
1
1
Pop-nut, steel with countersunk head
Blind rivet nuts, steel with countersunk head
"Emhart" Steel blind rivet nuts with 90° countersunk head, M-threads and through hole.
Emhart
No
UFO 35
UFO 40
UFO 45
UFO 65
UFO 45
Thread
mm
M4
M5
M6
M6
M8
Flange
diameter
mm
8
10
12
12
14
Rivetlength
mm
11.25
13
17
19
19
Grip
area
mm
1.7-3.5
1.7-4.0
1.7-4.5
4.5-6.5
1.7-4.5
Suitable
drill
mm
5.1
7.1
9.1
9.1
11.1
Art. no.
11881
-0100
-0209
-0308
-0357
-0407
Quantity
per
pack.
500
500
500
500
250
Pack.
f
1
1
1
1
1
393
Hand tools
4
Pop-nut, stainless steel
Blind rivet nuts
"Emhart" Blind rivet nuts of stainless steel SS 2332 with flat head, M-threads and through hole.
Thread
RivetFlange
Grip
Suitable
Art. no.
Quantity
diam.
diam.
area
drill
per
diameter
mm
mm
mm
mm
2339
pack.
M4
6.0
9.0
2.0-3.5
6.1
-0206
250
M5
7.0
10.0
0.25-3.0
7.1
-0305
250
M6
9.0
12.0
0.5-3.0
9.1
-0404
250
M8
11.0
15.0
0.5-3.0
11.1
-0503
250
Emhart
No
SS UPO 35
SS UPO 30
SS UPO 30
SS UPO 30
Quantity
f
1
1
1
1
Step drill
Step drill
Step drill of high speed steel for drilling holes for Pop-nut.
Art. no.
6998
Drill diameters
mm
For Pop-nut, thread
Cylindrical shank
mm
Pack.
qty
-0100
5.1 6.1 7.19.1 11.1 13.1
M 4 M 5 M 6M 8 M 10
6
10
Press nuts
Press nuts
"Emhart" ISC. Nut fastening featuring a small size and low weight. Primarily intended for light components in lightweight structures. Suitable for all sizes of material above 0.9 mm. Round mount with grooves. Locking collar with slot.
Made of yellow galvanised case-hardened steel.
Thread
mm
M3
M4
M5
Minimum
material
thickness
mm
0.9
0.9
1.2
Hole
diameter
mm
5.8
5.8
7.2
Outside
diameter
(D)
mm
7.4
7.4
8.9
Height
Art. no.
Quantity
per
Pack.
(B)
mm
4.5
4.5
4.8
11884
-0057
-0107
-0206
pack.
500
500
500
pkt
1
1
1
Self-tapping screws
Drilling and thread forming screws
Self-tapping screws
"Emhart" Wingspeed. Drilling and thread forming screws intended for thin sheet, max. 2×0.7 mm without predrilling. Ideal for galvanised sheet within ventilation and construction industries. Hexagonal head with cross head PH2. Bright
zinc plated.
Art. no.
5838
-0106
-0205
-0304
-0403
Diameter×length
mm
4.2×13
4.2×19
4.2×25
4.2×38
Hexagon screw heads
inch
¼
¼
¼
¼
Screw slot
No
PH 2
PH 2
PH 2
PH 2
No. per pack.
ea.
1000
1000
1000
500
Pack.
f
1
1
1
1
Self-tapping screws
"Emhart" Wing drill. Intended for securing or joining soft materials to metal, for example, wood, plywood, chipboard against steel joists. Tightening is achieved in a single action without predrilling. The milled wings on the drill tip
enlarge the hole so that the thread passes freely through the timber. When the drill tip has passed through the steel
section the wings break off. The thread then grips the steel and forms a strong material thread. Self-countersinking head.
Art. no.
11886
-0105
-0253
-0303
-0402
Diameter x length
mm
4.2x2.5
4.8x38
5.5x60
5.5x85
Head diameter
mm
8
9
10.5
10.5
Screw head Phillips
No
2
2
3
3
For material thickness, wood
mm
5-10
5-20
20-40
25-60
For material thickness, steel
mm
1.5-2.5
1.5-3.5
1.8-5.0
1.8-5.0
No. per pack.
500
250
100
100
Pack.
f
1
1
1
1
394
Please quote the
"Emhart" Dril-Kwick. Drilling and thread forming screws for streamlined industrial production in steel, aluminium,
etc. Ridges on the underside of the head locks the screw. B-thread. Bright zinc plated.
Diam.×
Head
Drill
Art. no.
Quantity
Quantity
length
diameter
capacity
per
mm
mm
mm
9477
pack.
f
3.5×9.5
6.9
2.25
-0104
1000
1
3.5×13
6.9
2.25
-0203
1000
1
3.5×16
6.9
2.25
-0302
1000
1
3.5×19
6.9
2.25
-0344
1000
1
4.2×13
8.2
2.75
-0401
1000
1
4.2×16
8.2
2.75
-0500
1000
1
4.2×19
8.2
2.75
-0609
1000
1
4.2×25
8.2
2.75
-0708
1000
1
4.8×13
9.5
3.0
-0807
1000
1
4.8×19
9.5
3.0
-1003
1000
1
4.8×50
9.5
3.0
-1201
500
1
Diam×
Flange
Screw
Drilling
Art. no.
Quantity
Pack.
length
diameter
head
capacity
6-point
per
mm
mm
mm/inch
mm
11875
pack.
f
3.5×9.5
8
¼"
2.25
-0108
1000
1
3.5×16
8
¼"
2.25
-0207
1000
1
3.5×19
8
¼"
2.25
-0256
1000
1
4.2×9.5
8.5
¼"
2.75
-0355
1000
1
4.2×13
8.5
¼"
2.75
-0371
1000
1
4.2×13
8.5
¼"
2.75
-0405
1000
1
4.2×25
8.5
¼"
2.75
-0504
1000
1
4.8×16
9.8
8
4
-0553
1000
1
4.8×25
9.8
8
4
-0603
1000
1
4.8×32
10.5
8
4
-0702
500
1
Hand tools
Self-tapping screws
4
Self-tapping screws
"Emhart" Super Dril-Kwick. Drilling and thread forming screw for streamline industry production in steel, aluminium, etc. Hexagonal head. Without ridges on the underside of the head. B-thread. Bright zinc plated.
Diam.×
Flange
Screw
Drill
Art. no.
Quantity
Pack.
length
diameter
head
capacity
per
hex
mm
mm
mm
mm
2343
pack.
f
4.8×25
10.5
8
4.3
-0259
500
1
4.8×38
10.5
8
4.3
-0309
500
1
5.5×19
11.0
8
5.0
-0408
250
1
5.5×25
11.0
8
5.0
-0507
250
1
5.5×38
11.0
8
5.0
-0606
250
1
6.3×19
13.2
8
5.5
-0705
250
1
6.3×22
13.2
10
5.5
-0804
250
1
6.3×38
13.2
10
5.5
-0903
250
1
6.3×50
13.2
10
5.5
-1000
250
1
Thread forming screw
Thread forming screw
"Emhart" Staps 308. For indoor assembly of structural sheeting, etc. Pivot washer with rubber seal. Hexagonal
screw head 8 mm. Bright zinc plated. Environment class 1.
Diam×
Thread
Application
Drill
Art. no.
Quantity
Quantity
length
diam.
per
mm
type
mm
7486
pack.
f
6.5×25
A
Batten
5.65
-0057
250
1
6.5×38
A
Batten
5.65
-0123
200
1
6.3×19
B
Steel beam
5.65
-0206
250
1
6.3×25
B
Steel beam
5.65
-0305
250
1
6.3×19
AB
Lightweight beam
5.65
-0404
250
1
395
Hand tools
4
Drilling and thread forming screws
Structural sheeting screw Staps
"Emhart" Staps DS. Drilling and thread forming screws for indoor assembly of structural sheeting, etc. Hexagonal
screw head 8 mm with flange. Bright zinc plated.
Diam.×
Flange
Drill
Application
Art. no. Quantity Quantity
length
diam.
capacity
per
In sheet
mm
mm
mm
0623
pack.
f
5.5×19
10.5
2×1.2 Overlapping sheet
-0205
250
1
6.3×22
14.5
2×1.0 Overlap sheet
-0304
250
1
5.5×19
11.0
6
Sheet against lightweight beam 6 mm
-0601
250
1
6.3×22
14
6
Longitudinal joint lightweight beam/beam
-0700
250
1
5.5×24
14
8
Sheet against steel beam
-0809
250
1
5.5×35
14
14
Sheet against steel beam
-0908
250
1
Structural sheeting screw Staps
Diam.×
length
mm
4.8×35
4.8×22
5.5×25
5.5×26
5.5×40
"Emhart" Staps DSS. Drilling and thread forming screws for outdoor assembly of structural sheeting, etc. 8 mm
hexagonal head with pivot flange and rubber seal. Stainless steel.
Flange
Drill
Application
Art. no.
Quantity
Quantity
diameter
capacity
per
In sheet
mm
mm
0622
pack.
f
14
2x1
Sheet against wood
-0305
250
1
14
4.5
Sheet against lightweight beam 4.5 mm
-0503
250
1
16
3.5
Sheet against lightweight beam 3.5 mm
-0602
250
1
16
6
Sheet against lightweight beam 6 mm
-0800
250
1
16
14
Sheet against steel beam 14 mm
-1204
200
1
Structural sheeting screw
"Emhart" Staps Combi. Painted screws. Drilling and thread forming. For outdoor assembly of structural sheeting
etc. Assembly should be avoided in aggressive environments. In these cases stainless steel screws are recommended.
Hexagon screw head 8 mm with pivot washer and rubber seal. Bright zinc plated screw, aluminium washer and polyester
painted head.
Diam.×
Flange
Colour
Application
Art. no.
Quantity
Quantity
length
diameter
per
mm
mm
3184
pack.
f
4.8×22
14
Black
Overlapping sheet
-0051
250
1
4.8×22
14
White
Overlapping sheet
-0069
250
1
4.8×35
14
Black
Batten
-0309
250
1
4.8×35
14
White
Batten
-0408
250
1
Nut setters
Nut setter
"Momento" For screws, not bits. Hex opening with recessed magnet that holds the screw.
Art. no.
6543
-0209
-1900
-1504
Momento
No
PNSM-¼"
PNSM-7 mm
PNSM-8 mm
Size for screws
¼"
7 mm
8 mm
Holder drive (design 4)
hex inch
¼
¼
¼
Length
mm
50
50
50
Pack.
qty
1
1
1
Nut setter
-1553
PNSM-10 mm
10 mm
¼
50
1
"Teng Tools" For screws, not bits. Hex opening with recessed magnet or ring that holds the screw.
Art. no.
11173
-0107
-0305
-0404
Teng Tools
No
NS45108M
NS45506M
NS45506R
Type
magnetic
magnetic
ring
Size for screws
¼"
6 mm
6 mm
hex inch
¼
¼
¼
Length
mm
45
45
45
Pack.
qty
10
10
10
Art. no.
11173
-0354
-0503
-0602
Teng Tools
No
NS4507M
NS4508M
NS4508R
Type
magnetic
magnetic
ring
Size for screws
7 mm
8 mm
8 mm
hex inch
¼
¼
¼
Length
mm
45
45
45
Pack.
qty
10
10
10
396
Please quote the
"Wera" For screws, not bits. With hex opening with recessed magnet that holds the screw. Intended for direct
attachment in a power driver according to design 4.
Art. no.
6075
-0205
-0254
-0304
-0403
-0502
-0601
"Wera 869/4 M"Size for screws mm/inch
6 mm
7 mm
8 mm
10 mm
13 mm
¼"
hex inch
¼
¼
¼
¼
¼
¼
Length
mm
65
65
65
65
65
65
Pack.
qty
5
5
5
5
5
5
Hand tools
Nut setter
4
Assembly screws
Assembly screw
"Emhart" Panel-Kwick M. For assembly of wall lining panels to steel beams max. 0.9 mm. Can also be used in batten.
Double thread and specially hardened tips. Large and low dome screw head with Phillips crosspoint tip no 2. Bright zinc
plated. Environment class 1.
Diam.×
Screw head
Bright zinc plated
length
diam.×height
Art. no.
Quantity
Pack.
per
mm
mm
1230
pack.
f
4.2×14
10.5×2.3
-0109
1000
1
4.2×25
10.5×2.3
-0208
1000
1
4.2×32
10.5×2.3
-0307
1000
1
4.2×45
10.5×2.3
-0406
500
1
Assembly screw
"Emhart" Panel-Kwick M-2. Drilling and thread forming screws for assembly in steel beams max. 2.5 mm. Large
and low dome screw head. Phillips crosspoint tip no 2. Bright zinc plated.
Art. no.
1005
-0102
-0201
-0300
-0409
Diam.×length
mm
4.2×14
4.2×25
4.2×32
4.2×45
Screw head
mm
10.5×2.3
10.5×2.3
10.5×2.3
10.5×2.3
Number per
pack.
1000
1000
1000
500
Pack.
f
1
1
1
1
Assembly screw
"Emhart" Panel-Kwick III. Screw for assembly of plasterboard to battens. Single thread and trumpet head with Phillips crosspoint tip no 2.
Diam.×
For plasterSurface finish
Art. no.
Quantity
Quantity
length
per
mm
board
9099
pack.
f
3.5×25
1 lag
Blankförzinkade
-0904
1000
1
3.8×32
1 layer
Bright zinc plated
-1001
1000
1
3.8×41
2 layer
Bright zinc plated
-1100
500
1
4.2×57
3 layer
Bright zinc plated
-1209
500
1
Assembly screw
"Emhart" Panel-Kwick S. For assembly of chipboard to battens or steel profile, max. 0.5 mm. Single thread with
tip. Countersunk head with ridges for self-anchoring. Phillips crosspoint tip no 2.
Diam.×
Surface finish
Art. no.
Quantity
Quantity
length
per
mm
9100
pack.
f
4.2×25
Bright zinc plated
-1008
1000
1
4.2×41
Bright zinc plated
-1107
500
1
4.2×51
Bright zinc plated
-1206
500
1
4.8×65
Bright zinc plated
-1305
250
1
Plasterboard screws
Plasterboard screw
"Emhart" Gipsfast. For securing light fittings in plasterboard and fibreboard. In plasterboard the assembly should not
be exposed to dynamic loads. Bright zinc plated. Phillips crosspoint tip no 2.
Diamonds
Head
Surface treatment
Art. no.
Quantity
Pack.
length
per
mm
mm
11876
pack.
f
4.8x11
9.5
Bright zinc plated
-0107
1000
1
4.8x22
9.5
Bright zinc plated
-0206
500
1
4.8x35
9.5
Bright zinc plated
-0305
500
1
397
Hand tools
4
Straightening - Hewing - Driving
Screw anchors
Screw anchors
"Emhart" Molly. Fastener for panels, boards or the like which are only accessible from one side, e.g. framed plasterboard partitions, fibre boards, sheet, plastic etc. Consists of a specially shaped metal sleeve (expander) with a thin flange
and studs at one end and threaded at the other. When the screw is tightened the wings of the sleeve expand and "rivet"the material at the rear. The joint permits the screw to be repeatedly entered and withdrawn. Self-adjusting for different material thicknesses. Screw head with straight/crosspoint tip.
Art. no.
7490
-0507
-0606
-0705
-1000
Emhart
No
4S
4SL
4L
6S
Grip area
mm
8-13
8-26
18-26
6-16
Thread
M4
M4
M4
M5
Drill diameter
mm
8
8
8
11
No. per packs
50
50
50
50
Pack.
f
1
1
1
1
Art. no.
7490
-1109
-1257
-1406
-1505
Emhart
No
6L
6XL
8S
8L
Grip area
mm
16-30
32-40
6-16
18-30
Thread
M5
M5
M6
M6
Drill diameter
mm
11
11
11
13
No. per packs
50
50
50
50
Pack.
f
1
1
1
1
Assembly Tools
Assembly tool for Molly screw anchors
Assembly tool for Molly and other screw anchors. Steel. Fits all Molly-sizes and dimensions.
Art. no.
0684
Orig. no
Pull length
mm
Length
mm
Pack.
qty
-0102
AP 200
12
225
1
Assembly tool for Molly and other screw anchors. Steel. Suitable for all Molly-sizes and dimensions.
Art. no.
11310
-0101
Orig. no
AP-100
Pull length
mm
18
Length
mm
230
Pack.
qty
6
"Emhart" Assembly tool for Molly and other screw anchors. Steel. Fits all Molly-sizes. Slim profile gives good accessibility even in confined areas, e.g. corners. Plastic covered handles.
Art. no.
1776
-0109
Emhart
Nr
MT 88
Length
mm
190
Wide
mm
24
Pack.
qty
1
Anvils
Anvil
Steel. Hardened work surface. With 1 horn.
Art. no.
5512
Weight
kg
Total length
mm
Work surface
mm
Height
mm
Hole square
mm
Pack.
qty
398
Please quote the
-0109
25
370
85×240
180
18
1
-0208
50
460
105×285
210
19
1
-0307
75
540
115×335
250
20
1
Holding pawl
Holding pawl
"Teng Tools" Separate dolly for body work.
Art. no.
12254
-0107
Teng Tools
No
AT405
Shape
toe
Length
mm
120
Width
mm
57
Height
mm
25
Weight
kg
1.25
Pack.
qty
6
-0206
AT410
universal
70
62
65
1.20
6
-0305
AT415
convex
128
58
40
1.10
6
-0404
AT420
heel
80
60
30
0.90
6
Hand tools
Stakes
4
Dolly set
"Teng Tools" Set of four different dollies for body work. Fits in Teng Tools tool boxes and tool trolleys.
Art. no.
11791
-0109
Teng Tools
No
TTXD04
No. of tools
4
Case dim.
mm
560x110x74
Weight
kg
4.8
Pack.
sts
1
Prybars
Prybar
"Teng Tools" Heavy-duty prybar equipped with through blade, striking head. Ergonomically designed plastic handle.
Art. no.
11811
-0105
-0204
-0303
Teng Tools
No
PB12A
PB18A
PB22A
Total length
mm
300
450
550
Pack.
qty
6
6
6
Prybar
"Hultafors" Square special alloy aluminium, as strong as steel yet much lighter.
Art. no.
6445
-0109
-0208
-0307
Hultafors
No
H480B
H700
H700B
Length
mm
480
680
680
Weight
kg
0.5
0.7
0.7
Pack.
qty
2
2
2
-0406
F430
430
0.4
2
-0505
F820
820
1.7
2
Prybar
"Teng Tools" Round, ground point at one end - flat hook shaped prybar at the other.
Art. no.
11698
-0103
-0202
Teng Tools
No
PB12
PB16
Length
mm
300
400
Pack.
qty
10
10
-0301
PB20
500
10
Hollow punches
Hollow punch
For leather etc. Bright polished, tapered cutting head. Enamelled.
Art. no.
5632
-0104
-0203
Diameter
mm
2
3
Pack.
qty
1
1
Art. no.
5632
-0609
-0708
Diameter
mm
7
8
Pack.
qty
1
1
-0302
4
1
-0807
9
1
-0401
5
1
-0906
10
1
-0500
6
1
-1102
12
1
399
Hollow punch
Hand tools
4
For leather etc. With ring. Bright polished, tapered cutting head. Rectangular shank. Enamelled.
Art. no.
1708
-0102
-0201
-0300
-0409
-0508
Diameter
mm
5
6
7
8
9
Pack.
qty
20
20
20
20
20
Art. no.
1708
-0706
-0805
-0904
-1001
-1100
Diameter
mm
11
12
13
14
15
Pack.
qty
10
10
10
10
10
Art. no.
1708
-1308
-1407
-1506
-1605
-1704
Diameter
mm
17
18
19
20
21
Pack.
qty
10
10
10
10
5
Art. no.
1708
-1902
-2009
-2108
-2207
-2306
Diameter
mm
23
24
25
26
27
Pack.
qty
5
5
5
5
5
Art. no.
1708
-2504
-2603
-2801
-3106
-3403
Diameter
mm
29
30
32
35
38
Pack.
qty
5
5
2
2
2
Art. no.
1708
-3809
-4104
-4401
-4609
Diameter
mm
42
45
48
50
Pack.
qty
1
1
1
1
-0607
10
20
-1209
16
10
-1803
22
5
-2405
28
5
-3601
40
1
Cold chisels
Flat chisels
Flat chisel
"Habero" For floor tiles. Special steel. Flat. Specially tempered, non-spread head. Enamelled.
Art. no.
1628
-0109
"Habero 202" Length
mm
80
Width
mm
6
Pack.
qty
10
-0208
100
10
10
Flat chisel
"Habero" For stone tiles. With cross-ground edge. Special steel Specially tempered, non-spread head. Enamelled.
Art. no.
1631
-0104
Length
mm
150
Width
mm
20
Pack.
qty
10
Flat chisels
Flat chisel
"Habero" Special steel Specially tempered, non-spread head. Enamelled.
Art. no.
1633
-0102
-0201
-0300
"Habero 95"Length
mm
100
125
150
Width
mm
16
16
19
Pack.
qty
10
10
10
Art. no.
1633
-0607
-0706
-0805
"Habero 95"Length
mm
225
250
300
Width
mm
25
28
30
Pack.
qty
10
10
10
-0409
175
22
10
-0904
400
32
10
Flat chisel
-0508
200
25
10
"Habero" Can be reground to approx. 1/3 of the total length. Special steel Specially tempered, non-spread head.
Enamelled.
Art. no.
6600
-0167
-0266
"Habero 95 N" Length
mm
200
250
Width
mm
26
30
Pack.
qty
10
10
Slotting chisel
Slotting chisel
"Habero" Special steel. Flat Specially tempered, non-spread head. Enamelled.
Art. no.
5906
"Habero 104" Length
mm
Width×thickness
mm
Pack.
qty
400
Please quote the
-0103
240
26×7
10
Hand tools
Electricians chisels
Electricians chisel
"Habero" Special steel. Octagonal. Specially tempered, non-spread head. Enamelled.
Art. no.
1646
-0107
-0206
Habero no
112A
2010
2512
Length
mm
200
250
Width
mm
10
12
Pack.
qty
10
10
4
-0503
3015
300
15
10
Bricklayers chisels
Bricklayers chisel
"Habero" Special steel. Octagonal. Specially tempered, non-spread head. Enamelled.
Chisels 300 mm complete with hand guard of PVC-plastic (Habero 108).
Length
Octagonal
Habero 110 Flat
handle
Art. no.
Chisel
Pack.
width
mm
mm
5885
mm
qty
300
16
-0207
23
10
400
18
-0405
26
10
With hand guard
300
16
-1007
23
1
Habero 111 Pointed
Art. no.
Pack.
1647
-0205
-0304
qty
10
10
-1005
1
Cross-cutting chisels
Cross-cutting chisel
"Habero" Special steel. Flat. Specially tempered, non-spread head. Enamelled.
Art. no.
1648
-0204
-0303
"Habero 96" Length
mm
125
150
Width
mm
7
8
Pack.
qty
10
10
-0402
200
10
10
Hand guard
Hand guard for cold chisels
"Habero" Made of PVC-plastic. Threaded over the chisel handle. Prevents hand injuries and gives a comfortable grip.
Art. no.
1640
-0202
Habero
No
108 Uni
For cape chisels
110-111/300-400 mm
For flat chisels
95/150-400 mm
Pack.
qty
1
Punches
Cylindrical
Pin punch
"Habero" Special steel. Cylindrical. With octagonal, enamelled handle. Specially tempered, non-spread head.
Art. no.
1665
-0103
-0202
-0301
-0400
-0509
-0608
"Habero 119" Tip diam.
mm
2
2.5
3
3.5
4
5
Total length
mm
150
150
150
150
150
150
Shaft diam.
mm
10
10
10
10
10
10
Pack.
qty
10
10
10
10
10
10
Art. no.
1665
-0707
-0806
-0905
-1002
-1101
mm
6
7
8
10
12
Total length
mm
150
150
150
150
150
Shaft diam.
mm
10
12
12
12
14
Pack.
qty
10
10
10
10
10
Sets
Set of punches
"Racodon" Set of pin punches made of tool steel, cylindrical, with hexagonal shaft. Supplied in plastic holder.
Art. no.
13953
-0109
Racodon
No
420 S1 ASN
No. of punches
ea.
6
Nose diameter
mm
3, 4, 5, 6, 7, 8
Length
mm
150
Pack.
sts
1
401
Set of punches
Hand tools
4
"Teng Tools" Special steel. Cylindrical. Hardened, with impact-resistant head. With octagonal shank. Supplied in plastic holder.A display is supplied with the order of 10 sets of punches PPS06.
Art. no.
6911
-0104
Teng Tools
No
PPSO6
No. of punches
ea.
6
Nose diameter
mm
345678
Length
mm
150
Weight
kg
0.5
Pack.
set
20
Set of pin punches
"Habero" Special steel. Cylindrical. With octagonal shank. Specially tempered, non-spread head. Supplied in sheet metal cassette.
Art. no.
2414
-0105
Habero
No
116 D
Number of punches
6
Tip diameters
mm
345678
Weight
kg
0.8
Pack.
set
1
Centre punches
Centre punch
"Habero" Special steel. Octagonal. Ground and polished tip. Special tempered, non spread head. Enamelled.
Art. no.
1689
-0105
-0204
-0303
mm
4
5
8
Material dim.
mm
10
12
16
Length
mm
120
120
150
Pack.
qty
10
10
10
Centre punch
"Habero" Tungsten carbide tip. Octagonal. Ground and polished. In plastic case.
Art. no.
1691
Habero
No
Tip diameter
mm
Length
mm
Pack.
qty
-0101
100 A-10
2.5
120
1
Automatic centre punch
"Teng Tools" With spring loaded stroke. The spring is compressed and released when pushing down on the tip. With
clip.
Art. no.
12226
-0102
Teng Tools
No
SCP01
Tip diameter
mm
1
Length
mm
135
Pack.
qty
50
Hole punches
Nail punches
Nail punch
"Habero" Special steel. Octagonal. Flat tip.
Art. no.
5997
-0103
Habero
9910-2
Tip diameter
mm
2
Length
mm
120
Pack.
qty
10
-0202
12-3
3
120
10
-0301
12-4
4
120
10
-0400
12-5
5
120
10
Nail punch
-0509
12-6
6
120
10
"Habero" Made of chrome vanadium steel according to the specification for striking tools. Contains five hole punches
and one centre punch. In plastic case.
Art. no.
13271
-0104
Habero
No
2113
No. of pieces
ea.
6
Hole punches diam.
mm
12345
Centre punch diam.
mm
4
Pack.
qty
1
402
Please quote the
Striking tools
"Habero" Special steel Contains five hole punches and one centre punch. Plastic holder.
Art. no.
1675
Habero
No
No. of tools
Hole punch tip diameter
mm
Tool length
mm
Weight
kg
Pack.
set
-0101
113
6
12345
120
0.5
1
Hand tools
Nail punch in set
4
Striking tools
Staplers
Tackers
Tacker
"Rapid" Fine wire model. in metal. Recoilless. With high driving force. The handle - without an "empty shot" be
fired - can be locked in its bottom position. Intended for furniture covering, securing decorative materials, posters, etc.
Art. no.
7333
-0151
Rapid
No
R 23
For staple length
mm
4-8
Back width
mm
10.6
Wire width
mm
0.7
Magazine volume
no. of staples
156
Pack.
qty
5
Tacker
"Rapid" Flat wire model in metal. Heavy-duty model - suitable for securing soft tiles, sealing strips, foil, etc. on all
types of wood. Recoilless. Adjustable driving force. Can also be used with a special magazine together with T-shaped.
Tacker
7146
-0208
Rapid
No
R 34
For staple length
mm
6-14
Back width
mm
10.6
Wire width
mm
1.3
Magazine volume
no. of staples
84
Pack.
qty
5
Special magazine for plastic staples TU7146
-0307
10and plastic tack T9 and T12
Pack.
qty
1
Special model
Tacker
"Rapid" Fine wire model in metal. Recoilless. Equipped with 10 mm long nose. Suitable for securing materials in
corners and confined areas , excellent for securing sealing strip around windows and doors. Adjustable driving
force.
Art. no.
7684
-0206
Rapid
No
R 30
For staple length
mm
6-8
Back width
mm
10.6
Wire width
mm
0.7
Magazine volume
no. of staples
156
Pack.
qty
5
Hammer tackers
Hammer tacker
"Rapid" Fine wire model. Ergonomic design. Nickel-plated sheet metal. Only 360 g. For quick and easy securing of
thin material to wood e.g. foil, posters, labels, fabric, etc. Ergonomically designed rubber handle.
Art. no.
7632
-0100
Rapid
No
R 19
For staple length
mm
4-6
Back width
mm
10.6
Wire width
mm
0.7
Magazine volume
no. of staples
156
Pack.
qty
5
403
Striking tools
Hammer tacker
Hand tools
4
"Rapid" Flat wire model. Ergonomic design. Nickel-plated sheet metal. Heavy-duty model. For quick and easy securing of foil, backing paper, etc. Ergonomically designed rubber handle. Suitable flat wire staples no 140 (max length 10
mm).
Art. no.
7145
-0100
Rapid
No
R 11
For staple length
mm
6-10
Back width
mm
10.6
Wire width
mm
1.3
Magazine volume
no. of staples
168
Pack.
qty
5
Hammer tacker
"Rapid" Hammer tacker with metal flat wire. Robust and strong. No loose parts. Easy bottom loading. Ergonomic handle. Reversible driver. Protective plate. Suitable for securing roofing felt, insulation, mats, labels, etc.
Art. no.
15489
-0107
Rapid
No
R 211
For staple length
mm
6-12
Back width
mm
10.6
Wire width
mm
1.3
Magazine volume
No. of staples
168
Pack.
-
Hammer tacker
"Rapid" Flat wire model. Extra heavy-duty model. For quick and easy securing of foil, backing paper, etc. Equipped
with wide anvil so as not to damage the material to be tacked. Ergonomically designed rubber handle.
Art. no.
0074
-0100
Rapid
No
R 54
For staple length
mm
10-14
Back width
mm
10.6
Wire width
mm
1.3
Magazine volume
no. of staples
168
Pack.
qty
5
Tackers
Half strip stapler
"Rapid" Half strip stapler. With extra large staple capacity, ideal for the home office. Cover and base plate in impact
resistant ABS-plastic. Staple mechanism of steel and anvil of hardened steel. The anvil is turned a half-turn for tacking.
Rubber feet prevents scratching of the table and gives stability when stapling. Black.
Suitable staples no 26/6 and 24/6 art. no. 13783-0105 or 13783-0204.
Art. no.
13780
-0108
Rapid
No
F 16
Capacity sheets
ea.
20
Staple depth
mm
72
Magazine holds 24/6
no. of staples
123
Magazine holds 26/6
no. of staples
165
Pack.
qty
10
Stapling pliers
"Rapid" Stapling pliers K1. Perfect for e.g. florists, shops, post offices or offices. Reversible anvil for tacking. Chromium plated with regard to allergies. Staples up to 50 x 80 g A4-sheets.
Art. no.
14670
-0109
Rapid
No
K1
Capacity A4-sheets (80 g)
ea.
50
Staple depth
mm
55
Magazine volume
no. of staples
200
Pack.
qty
50
Fence pliers
Fence pliers
"Rapid" Fence pliers. Made of steel with grip friendly rubber inserts. Compact and versatile for minor fence work,
cages, protective mash, etc. in both the home and garden. Ideal for use where access is difficult. The pliers support two
types of fence staples for a broad application area. Ergonomic design.
Suitable fence staples no VR16 or no VR22.
Art. no.
13776
-0104
Rapid
No
FP20
For diameter
mm
VR 16, 2-8, VR 22, 5-11
Wire dimension
mm
VR 16, 1.3, VR 22, 2.0
Pack.
qty
10
404
Please quote the
Striking tools
Electric Tacker
"Rapid" For fine wire staples and brads. ABS-plastic. Small and practical. Suitable for diverse decoration and hobby
work. Safety catch. Staple supplied.
Art. no.
14316
-0109
Rapid
No
E100R
For staple length
mm
6-14
Back width
mm
11.4
Wire width
mm
0.75
Brad, wire width
mm
1.27 x 1.05
Brad head
mm
2
Magazine volume
no. of staples
92
Magazine volume
no. of brads
50
Max. stroke/min.
quantity
20
Connection cord
m
1.8
Weight
kg
0.630
Pack.
qty
7
Hand tools
Electric tackers
4
Electric tacker
"Rapid" E-tac. For flat wire staples. Comfortable electric tacker that is small, flexible and easy-to-use and does
not require large or strong hands. A good tool to have on hand in the home. On and off switch and safety catch on the
trigger. Quick magazine for a single charge of staples. Staple window indicate when the staples are running out. 1.8 m
cord. Ideal for stapling torn materials such as paper, plastic foil, decoration material, posters, as well as mats, etc.
Art. no.
12029
-0101
Rapid
No
E-tac
Magazine capacity
ea.
52
Staples back width
mm
10.2
Staples leg length
mm
6-14
Staples wire width
mm
1.3
Weight
kg
0.630
Pack.
qty
5
Electric tacker
"Rapid" For fine wire staples. Electric tacker. Straight front section which makes it easy to work where space is
limited. The handles surface treatment provides optimal friction, giving the handle a good grip. Safety catch on the trigger
that is suitable for both left and right hand use. 2-finger grip. easy to load with common magazine for staples and brads.
Application area with staples: Covering furniture, insulation material and soft ceiling tiles. With brads: Putting up panels
and mouldings, etc. Staple window.
Art. no.
12641
-0109
Rapid
No
ESN 113
Magazine capacity: staples
ea.
156
Magazine capacity: brads
ea.
90
Staples back width
mm
10.6
Staples leg length
mm
6-14
Staples wire width
mm
0.7
Brad length
mm
15
Brad wire width
mm
1.27×1.05
Brad head
mm
2.0
Max. stroke/min.
quantity
20
Connection cord
m
2.5
Weight
kg
0.850
Pack.
qty
5
Electric tacker
"Rapid" For narrow crown staples/brads. Ergonomic design, recoil-free. Has a universal magazine for narrow
crown staple or brads without change-over. Striking strength is controlled by pressure 20 strokes/min. Supplied with
3.5 m mains cable and moulded plug. Intended for 230 volt 1-phase A.C.
Application area: For nailing panels, ceiling tiles, mouldings and diverse work within joinery and furniture industries.
Art. no.
2607
-0102
Rapid
No
606
Magazine capacity: narrow crown staple
ea.
90
Magazine capacity: brads
ea.
90
Narrow crown staple back width
mm
6.0
Narrow crown staple leg lengths
mm
12-25
Narrow crown staple wire width
mm
1.1
Brad lengths
mm
15-25
Brad, wire width
mm
1.27×1.05
Brad, head
mm
2.0
Length×width×height
mm
220×50×190
Weight
kg
1.6
Pack.
1
405
Hand tools
4
Striking tools
Staples
Staples
"Rapid" Fine wire staples. Have thin and narrow staple legs. Ideally suitable for fibrous or hard materials e.g. fabrics,
leather or on narrow tacking objects such as sealing strips, boards, etc. The narrow legs make small holes in the material
and secure it firmly. Fine wire staples have the best striking capacity and are recommended for tacking very hard materials. Fit staplers Rapid 13, 19, 23, 30, 33, 63, 83, 113, 213, M10Y and MS813.
Art. no.
7333
-0177
-0201
-0235
-0276
Rapid
No
13/4
13/6
13/6 Stainless 13/8 Stainless
Staple length (B)
mm
4
6
6
8
Back width (A)
mm
10.6
10.6
10.6
10.6
Wire width
mm
0.7
0.7
0.7
0.7
No. of staples per
box
2500
2500
2500
2500
No. of boxes/card.
ea.
50
50
50
50
Ditto 5000-box
7333
-0607
No. of boxes/card.
ea.
50
Art. no.
7333
-0300
-0409
-0508
-0557
Rapid
No
13/8
13/10
13/14
13/20
Staple length (B)
mm
8
10
14
20
Back width (A)
mm
10.6
10.6
10.6
10.6
Wire width
mm
0.7
0.7
0.7
0.7
No. of staples per
box
2500
2500
2500
1250
No. of boxes/card.
ea.
50
50
50
50
Ditto 5000-box
7333
-0706
No. of boxes/card.
ea.
50
-
Staples
"Rapid" Fine wire staples. Suitable for Rapid 53, 153, 253, 353, 453, 530, 553, MS853, M10R, E100R and Arrow JT21 tackers.
Art no (2500-box)
7333
-1001
-1100
-1209
-1308
-1407
Rapid
No
53/6
53/8
53/10
53/12
53/14
Staple length (B)
mm
6
8
10
12
14
Back width (A)
mm
11.4
11.4
11.4
11.4
11.4
Wire width
mm
0.75
0.75
0.75
0.75
0.75
No. of boxes/card.
ea.
50
50
50
50
50
Staples
"Rapid" Flat wire staples. Flat wire staples are recommended for tacking in fragile materials such as paper, cardboard, fibreboard and plastic foil. The staples wide back keeps the material firmly in position.
SS = Stainless staples.
DP = DP-staples have pointed staple legs with split direction of rotation especially suitable for fibreboard.
Fit tackers Rapid 11, 14, 34, 44, 54, 64, E-tac, ESN114 and MS840. In addition also fit Arrow T 50, HT 50 and ET 50.
Art no (2000-box)
8610
-0203
-0260
-0302
-0336
Rapid
No
140/6
140/8
140/10
140/10 SS Stainless
Staple length (B)
mm
6
8
10
10
Back width (A)
mm
10.6
10.6
10.6
10.6
Wire width
mm
1.3
1.3
1.3
1.3
No. of boxes/card.
ea.
50
50
50
50
Ditto 5000-box
8610
-1003
-1102
-1201
No. of boxes/card.
ea.
20
20
20
Art no (2000-box)
8610
-0369
-0401
-0708
Rapid
No
140/12
140/14
140/14 DP
Staple length (B)
mm
12
14
14
Back width (A)
mm
10.6
10.6
10.6
Wire width
mm
1.3
1.3
1.3
No. of boxes/card.
ea.
45
40
50
Ditto 5000-box
8610
-1300
-1409
No. of boxes/card.
ea.
20
20
-
Staples
"Rapid" Aluminium flat wire staples. Do not leave a rust mark and are therefore suitable for timber marking
(metal detectors are not affected by aluminium staples). Fit all Rapids flat wire staple tackers.
Art no (5000-box)
11720
-0105
Rapid
No
11/9
Staple length (B)
mm
9
Back width (A)
mm
10.6
Wire width
mm
1.3
No. per
box
5000
No. of boxes/card
qty
1
406
Please quote the
Striking tools
Hand tools
Staples
4
"Rapid" Flat wire staples. Intended for Rapid 31. For tacking in materials such as paper, cardboard as well as plastic
foil. The staples wide back keeps the material firmly in position.
Art no (5000-box)
2701
-0057
-0107
-0156
-0206
Rapid
No
73-6
73-8
73-10
73-12
Staple length (B)
mm
6
8
11.3
12
Back width (A)
mm
11.3
11.3
11.3
11.3
Wire width
mm
1.3
1.3
1.3
1.3
No. of boxes/card
qty
20
20
20
20
Staples
"Rapid" Cable staples. Bent U-form for tacking low voltage cables, max. 50 V. Fit cable tacker Rapid 28.
Art. no. (5x1000 pack.)
0077
-0057
-0156
Rapid
No
28/9
28/11
Staple length (B)
mm
9
11
Back width (A)
mm
6.3
6.3
Wire width
mm
1.3
1.3
No. of pack./box
ea.
20
20
Ditto white enamelled
0077
-0172
-0255
No. of boxes/card.
ea.
20
20
Staples
"Rapid" Cable staples. Bent U-form for tacking low voltage cables, max. 50 V. Fit cable tacker Rapid 36.
Art. no. (5x1000 pack.)
Rapid
Staple length (B)
Back width (A)
Wire width
No. of pack./box
9600
No
mm
mm
mm
ea.
-0062
36/10
10
7.7
1.3
20
-0088
36/10 White enamelled
10
7.7
1.3
20
-0153
36/12
12
7.7
1.3
20
-0252
36/14
14
7.7
1.3
20
-0450
36/14 White enamelled
14
7.7
1.3
20
Staple remover
Staple remover
"Rapid" To easily extract staples. Nickel-plated extraction section, plastic handle.
Art. no.
0290
-0108
Rapid
No
R3
Total length
mm
160
Pack.
qty
10
Hammers
Ergonomic engineers hammers
Ergonomic engineers hammer
"Hultafors" T-block pein hammer. The head dampens impact and counteracts recoil. Handle gives optimal grip
for all work. The counterweight at the ends gives improved balance and more natural rotation. 3 different grip sizes.
Art. no.
3994
-0101
-0150
-0200
-0309
-0408
Hultafors
No
P160S
P250S
P250M
P375M
P375L
Weight without handle
g
160
250
250
375
375
Grip size
small
small
medium
medium
large
Pack.
qty
2
2
2
2
2
-0507
P600L
600
large
2
"Hultafors" T-block ball hammer. The head dampens impact and counteracts recoil. Handle gives optimal grip
for all work. The counterweight at the ends gives improved balance and more natural rotation. 3 different grip sizes.
Art. no.
Hultafors
Grip size
Pack.
3990
No
g
-0402
K375L
375
large
2
-0501
K600L
600
large
2
"Hultafors" T-block combi-hammer. The head dampens impact and counteracts recoil. Handle gives optimal grip
for all work. On nylon striking face, the other steel. The counterweight at the ends gives improved balance and more
natural rotation. 3 different grip sizes.
Art. no.
3999
-0106
-0155
-0205
-0304
-0403
Hultafors
No
C160S
C250S
C250M
C375M
C375L
g
160
250
250
375
375
Grip size
small
small
medium
medium
large
Pack.
qty
2
2
2
2
2
-0502
C600L
600
large
2
qty
-0162
K160S
160
small
2
-0170
K250S
250
small
2
-0261
K250M
250
medium
2
-0303
K375M
375
medium
2
407
Hand tools
4
Striking tools
Loose face
Face diameter
Pack.
3999
mm
-1005
24
1
-1104
25
1
-1104
25
1
-1203
29
1
-1203
29
1
-1302
34
1
Engineers hammers (Pein hammers)
Engineers hammer (Pein hammer)
"Hultafors" Sand-blasted and lacquered. With round face and long pein. Ash handle/hickory.
Art. no.
1795
-0304
-0403
-0502
-0601
Hultafors
AB150
200
300
400
Weight with handle
approx. g
200
300
400
500
Head diameter
mm
15
17
19
21
Suitable handle
1977
-0304
-0403
-0403
-0601
Pack.
qty
2
2
2
2
-0700
600
700
23
-0601
2
Ball pein hammers
Ball pein hammer
"Hultafors" Sand-blasted and lacquered. With round face and emery-ground ball. Ash handle/hickory.
Art. no.
1800
-0208
-0307
-0406
-0505
-0604
Hultafors
XK150
200
300
400
500
Weight with handle
g
220
320
450
550
650
Head diameter
mm
20
22
26
28
28
Suitable handle
1977
-0304
-0403
-0403
-0601
-0601
Pack.
qty
2
2
2
2
2
Electrical and beading hammer
Electrical and beading hammer
"Hultafors" Electricians hammer Head with U-shaped striking surface - the design of the striking surface makes it possible to nail close to the ceiling and corners and reduces the risk of hammer marks on the surrounding surfaces. Straight
claw - for improved access when removing nails or staples for cable close to ceilings and corners. Ergonomic handle with good grip along the whole handle, both for power and precision.
Art. no.
11461
-0108
Hultafors
type
EL
Weight with handle
g
550
Total length
mm
280
Head diameter
mm
23
Pack.
qty
2
Carpenters hammers with tubular steel handle
Carpenters hammer with tubular steel handle
"Luna" With round face and octagonal throat. Chrome, oval steel handle covered with perforated rubber grip.
Art. no.
20051
-0105
-0204
-0303
oz
13
16
20
Weight with handle
g
575
675
790
Handle length
mm
315
315
340
Head diameter
mm
25
27
29
Pack.
qty
6
6
6
Carpenters hammer with tubular steel handle
"Hultafors" With round face and octagonal throat. Ergonomically designed handle in two sizes.
Art. no.
4049
-0104
-0203
-0302
Hultafors
No
TS 16L
TS 16XL
TS 20L
oz
16
16
20
g
450
450
570
Handle size
Large
X Large
Large
Pack.
qty
2
2
2
Carpenters hammers with solid steel handle
Carpenters hammer with solid steel handle
"Stanley" FatMax XL AVX. Forged one piece vibration dampened carpenters hammer.
Cast and grip-friendly rubber handle. Magnetic nail holder with magnet in the top of the head.
Art. no.
14877
-0100
-0209
Stanley
No
1-51-162
1-51-164
Head weight
oz
16
20
Head weight
g
450
570
Total length
mm
340
340
Head diameter
mm
30
32
Pack.
qty
4
4
408
Please quote the
-0401
TS 20XL
20
570
X Large
2
Striking tools
Nail puller
"Hultafors" Type Atle. For extracting brads and nails, as well as nails without heads, even in tight corners. Also ideal
for chipboard, plasterboard, plywood and masonite. Grips depth set heads.
Art. no.
2740
-0100
Length
mm
195
Weight
g
600
Pack.
qty
5
Hand tools
Nail pullers
4
Bricklayers hammers with steel tube handle
Bricklayers hammer with steel tube handle
"Luna" With square face and steel tube handle, covered with perforated rubber grip. Black enamelled neck, otherwise
polished finish.
Art. no.
20054
-0104
oz
16
Weight with handle
g
700
Pack.
qty
6
Flat hammers
Flat hammer
"Hultafors" With ash handle. With square face and pein at an angle to the handle.
Art. no.
1846
-0204
Hultafors
No
PL-100
Weight with handle
g
150
Pack.
qty
2
Magnetic hammers
Magnetic hammer
"Stanley" With magnetised pein. Square face. Stove enamelled design. Stained hickory handle.
Art. no.
8081
-0302
Stanley
No
1-54-304
Weight with handle
g
210
Pack.
qty
6
Sheet-metal workers hammer (Roofing hammer)
Sheet-metal workers hammer
"Hultafors" Sand-blasted and lacquered, polished face and pein. Oval shaped, nickel-plated steel tube handle covered
with ergonomic rubber grip.
Art. no.
1911
-0105
-0204
Hultafors
PR300
400
Face square
inch
7/8
1
g
300
400
Weight with handle
g
570
670
Pack.
qty
2
2
Cleaning hammers (Chipping hammers)
Cleaning hammer (Chipping hammer)
"Hultafors" With straight pick. 15 mm hardened zone at both ends for sharpening. Steel tube handle with plastic grip.
Art. no.
9582
-0106
Hultafors
type
SV
Weight with handle
g
280
Pack.
qty
10
Blacksmiths hammers
Blacksmiths hammer
"Hultafors" Forged special steel. Hickory handle.
Art. no.
1918
-0603
Hultafors
Z800
g
800
Weight with handle
g
900
Suitable handle
1977
-0809
Pack.
qty
2
-0652
900
900
1100
-0809
2
-0702
1000
1000
1100
-0809
2
-0801
1200
1200
1400
-1005
2
-0900
1500
1500
1700
-1005
2
-1007
2000
2000
2300
-1005
2
409
Hand tools
4
Striking tools
Blacksmiths sledge hammers
Blacksmiths sedge hammer
"Hultafors" Hickory handle. With bright polished work surfaces.
Weight Weight Shank- Eyes
No 1922
No 1923
without with length size Hulta- Art. no. Pack. Hulta- Art. no.
handle handle
fors
fors
kg
kg
mm
mm SMH- 1922
qty
SRP1923
3
3.5
750
40×30 3000 -0201
1
4
4.5
750
40×30 4000 -0300
1
4000 -0309
5
5.5
800
45×35 5000 -0409
1
6
6.6
850
45×35 6000 -0508
1
-
Pack. Hultafors
qty
MH3000
1
4000
5000
6000
No 1924
Art. no. Pack.
1924
-0100
-0209
-0308
-0407
qty
1
1
1
1
Chisel hammers
Club hammers
Club hammer
"Hultafors" Sand-blasted and lacquered. Hickory handle.
Art. no.
1936
-0106
Hultafors
No
ME 1000
g
1000
Weight with handle
g
1150
Suitable handle
1978
-0204
Pack.
qty
2
-0205
ME 1200
1200
1350
-0204
2
-0304
ME 1500
1500
1650
-0204
2
Club hammer
"Luna" Hammer finish. Oval steel tube handle, covered with perforated rubber grip.
Art. no.
20055
-0101
g
1200
Weight with handle
g
1500
Pack.
qty
6
Stone sledge hammers
Stone hammers
Stone hammers
"Hultafors" Forged in alloyed special steel, hardened at both ends. Hickory handle secured with special resin and safety pin.
Art. no.
7165
-0105
-0204
-0303
Hultafors
KS4000
5000
6000
Weight
kg
4
5
6
Handle length
mm
900
900
900
Suitable handle
8496
-0707
-0707
-0707
Pack.
qty
1
1
1
Stone sledge hammers
Stone sledge hammer
"Hultafors" With square, bevelled face and ground pein. Hickory handle secured with special resin and safety pin.
Art. no.
1941
-0109
-0208
-0307
Hultafors
STS3000
4000
5000
Weight
kg
3
4
5
Handle length
mm
900
900
900
Suitable handle
8496
-0707
-0707
-0707
Pack.
qty
1
1
1
Metal sledge hammers
Lead sledge hammers
Lead sledge hammer
Art. no.
Weight
Handle length
Pack.
410
Please quote the
8760
kg
mm
qty
-0102
1
310
1
-0201
2
350
1
-0300
3
380
1
-0409
5
790
1
Striking tools
Raw hide mallets
Rawhide mallet
"Thor Hammer" Completely of rawhide. Hickory handle.
Art. no.
1952
-0204
Thor Hammer
No
114/3
Face diameter
mm
44
Weight with handle
g
225
Pack.
qty
1
-0303
116/4
50
325
1
-0402
120/5
63
575
1
-0501
122/6
70
725
1
Hand tools
Mallets
4
Soft face hammers
Plastic mallet
"Thor Hammer" Type Thorex Nylon. Nylon hammer. With replaceable nylon face. White. (The face has a
threaded stud.) Steel head. No 708N and 720N with hickory handle. Others with nylon handle and rubber grip.
Art. no.
1962
-0103
-0202
-0301
-0350
-0400
-0459
Thor Hammer
No
708N
710
712
714
716
720N
Face diameter
mm
25
32
38
44
50
63
Weight with handle
g
225
450
650
850
1250
2500
Pack.
qty
10
10
10
10
10
1
Dead blow hammers
Separate faces
Separate face
"Thor Hammer" The face has a threaded stud. Suitable for all Thor Hammers hammers with replaceable faces that
have a threaded pin. The faces are made of plastic, rubber, nylon and polyurethane.
Face
Separate plastic face (red)
Separate rubber face (grey)
dia.
Thor
Art. no.
Pack.
Thor
Art. no.
Pack.
Hammer
Hammer
mm
No
0728
qty
No
1962
qty
25
708PF
-0605
10
708VF
-0954
10
32
710PF
-0704
10
710VF
-1002
10
38
712PF
-0803
10
712VF
-1101
10
44
714PF
-0902
10
714VF
-1200
10
50
716PF
-1009
10
716VF
-1309
10
63
Face
Separate nylon face (white)
Separate polyurethane face (brown)
dia.
Thor
Art. no.
Pack.
Thor
Art. no.
Pack.
Hammer
Hammer
mm
No
1962
qty
No
8979
qty
25
708NF
-0509
10
708TF
-0471
10
32
710NF
-0608
10
710TF
-0455
10
38
712NF
-0707
10
712TF
-0505
10
44
714NF
-0756
10
714TF
-0604
10
50
716NF
-0806
10
716TF
-0703
10
63
720NF
-0905
10
720TF
-0802
10
Plastic mallet
Plastic mallet
"Hultafors" Type Supercraft. Steel head, filled with fine steel balls. Replaceable nylon faces (the face is driven on).
Supplied with steel handle and rubber grip.
Hammer
3099
-1004
-1103
-1202
-1301
Hultafors
STFS30
40
50
60
Head diameter
mm
30
40
50
60
Weight with handle
g
570
850
1150
1790
Pack.
qty
2
2
2
1
Loose faces
3099
-2101
-2309
-2408
-2507
Hultafors
SF30
40
50
60
Pack.
qty
1
1
1
1
411
Hand tools
4
Striking tools
Polyurethane mallets
Polyurethane mallet
"Teng Tools" The the head is filled with fine steel particles to prevent the hammer from bouncing back after striking.
Black.
Art. no.
11787
-0105
-0204
Teng Tools
No
HMD35
HMD55
Head diameter
mm
35
55
Weight
g
300
980
Pack.
qty
6
6
Polyurethane mallet
"Stanley" Type Compo-Cast. With soft faces. Cast one piece polyurethane design. The handle is welded to the
head on top and has a honeycomb pattern. The handle end can also be used as a striking surface. The mallets are also
non-sparking as the steel construction is completely covered by hot-pressed polyurethane.
Art. no.
9291
-0108
-0207
-0306
-0405
-0504
Stanley
No
1-57-530
1-57-531
1-57-532
1-57-533
1-57-534
Head diameter
mm
38
44
51
64
70
Head length
mm
79
95
108
121
133
Total length
mm
225
280
325
355
405
Weight
g
280
500
600
1200
1500
Pack.
qty
1
1
1
1
1
Plastic mallets
Plastic mallet
Rectangular. Hickory handle.
Art. no.
Dimensions
Weight
Pack.
1961
mm
g
qty
-0104
155×85×35
500
1
Rubber mallets
Rubber mallet
"Hultafors" Made of solid, black rubber. Normal hardness. Wooden handle.
Art. no.
10463
-0108
-0207
Hultafors
No
GU 40
GU 55
Face diameter
mm
40
55
Weight with handle
g
150
280
Pack.
qty
2
2
-0306
GU 65
65
500
1
-0405
GU 75
75
680
1
Hammer handles
Hammer handle
"Hultafors" Oval attachment. Made of hickory (1977/285-330 mm of ash). Without wedge. The eye dimensions are
directly adapted for "Hultafors"-hammers.
Art. no.
1977
-0205
-0304
-0403
-0601
-0809
-1005
Hultafors
No
HS 285
HS 290
HS 310
HS 330
HS 375
HS 410
Length
mm
285
290
310
330
375
410
Eye dim.
mm
10×7
12×9
15×10
17×11
21×14
25×18
Fits AB
No
12
3
4-5
6-7
Fits XP, Z
No
0
1
2-3
4-5
6-7
8-9
Fits XK
No
10
11
12-13
14-15
16-17
Pack.
qty
5
5
5
5
5
5
Art. no.
1978-0204
1979-0302
Hultafors
No
MHS 305
MHS 270
Length
mm
305
270
Eye diam.
mm
22x17
24 Ø
Fits type
ME 1 2 3
M -600
Pack.
qty
5
5
Bore hammer handles
Bore hammer handle
"Hultafors" Made of hickory. Without wedge. Oval attachment.
Art. no.
8500
Hultafors
No
Length
mm
Eye dim.
mm
Pack.
qty
412
Please quote the
-0206
BHS 350
350
33×23
5
Striking tools
Hand tools
Pick handles
Pick handle
"Hultafors" Of box.
Art. no.
Hultafors
Length
Eye dim.
Fits
Pack.
8389
No
mm
mm
No
qty
4
-0103
KS 900
900
72×40
2286
5
Sledge handles
Sledge handle
"Hultafors" Straight hickory handle with oval attachment and drilled hanging hole. Supplied with steel wedge and handle fitting instructions.
Art. no.
8496
-0707
-1101
-1200
Hultafors
No
SSR 900
SSR 900
SSR 900
Size
Medium heavy
Heavy
Extra heavy
Length
mm
900
900
900
Eye dim.
mm
41×32
45×35
50×36
Pack.
qty
5
5
5
Axe handles
Axe handle
"Hultafors" Curved hickory handle with drilled hanging hole. Supplied with wooden wedge and handle fitting instructions.
Art. no.
8498
-0200
-0101
-0408
-0705
-0804
Hultafors
No
YSS 375
YSS 375
YSS 500
YSS 650
YSS 700
Length
mm
375
375
500
650
700
Eye dim.
mm
43×18
50×20
50×20
50×20
50×20
Pack.
qty
5
5
5
5
5
-0903
YSS 750
750
63x23
-
Axe handle
"Hultafors" Straight hickory handle with drilled hanging hole. Supplied with wooden wedge and handle fitting instructions.
Art. no.
1519
-0101
-0200
-0309
Hultafors
No
YSR 500
YSR 750
YSR 800
Length
mm
500
750
800
Eye dim.
mm
50×20
63×23
55×27
Fits
No
21 7/0.9
7/1.5
141
Pack.
qty
5
5
5
Handle wedges
Handle wedge
"Sfix" Three point wedges. Steel.
Art. no.
1992
Sfix
No
Width
mm
Pack.
qty
Art. no.
1992
Sfix
No
Width
mm
Pack.
qty
-0107
00
13
25
-0503
3
26
25
-0206
0
16
25
-0602
4
29
25
-0305
1
20
25
-0701
5
32
25
-0404
2
23
25
-0800
5½
40
25
Handle wedge
"Hultafors" Round steel wedges for use when fitting handles on axes, hammer and sledge hammers.
Art. no.
11907
-0100
-0209
-0308
-0407
Hultafors
No
SK 9
SK 11
SK 12
SK 16
Diameter
mm
9
11
12
16
No. of wedges per
DIY-pack.
2
2
2
2
Quantity DIY-pack.
per box
1
1
1
1
-0506
SK 17
17
2
1
413
Hand tools
4
Woodworking tools
File handles
File handle
"Nicholson" Ergonomic file handle with five different inserts for secure attachment of files with different tangs: round,
square, rectangular, three square and half round. With hanging hole.
Art. no.
12062
-0109
Handle length
mm
115
Insert length
mm
52
Pack.
qty
1
Woodworking tools
Rasp tools
Surform tools
Surform tools
"Surform" Scraper. Made of plastic. With curved blade. Supplied with one blade.
Art. no.
6313
-0108
Surform
No
5-21-115
Total length
mm
185
Width
mm
42
Pack.
qty
6
Loose blade
6313
-0207
Surform
No
5-21-515
Pack.
qty
12
Surform tools
"Surform" Plane file. Made of metal. With folding handle.
Art. no.
3122
Surform
No
Total length
mm
Width
mm
With blade
No
Pack.
qty
-0106
5-21-122
310
42
5-21-293
1
Surform tools
"Surform" Smoothing planes. Made of metal. With fine cut blade. Loose blades also fit tools 21-102 and 21-104.
Art. no.
3124
-0153
Surform
No
5-21-399
Total length
mm
155
Width
mm
42
Pack.
qty
1
Loose blade
3125
-0103
Surform
No
5-21-398
Pack.
qty
12
Surform tools
"Surform" Separate replacement blades. Long. Fit tools 21-101, 21-103 and 21-122.
Art. no.
3127
-0101
-0200
-0309
Surform
No
5-21-293
5-21-393
5-21-299
Type
Standard blade
Fine cut blade
Half round blade
Length×width
mm
250×42
250×42
250×42
Pack.
qty
12
12
6
-0408
5-21-508
For metal and plastic
250×42
12
Planes
Spokeshaves
Spokeshaves
"Stanley" With double adjuster screws for adjusting the plane-iron. Round base. Varnished.
Art. no.
2021
-0100
Stanley
No
1-12-152
Total length
mm
255
Iron width
mm
54 (21/8")
Pack.
qty
6
Loose plane-iron
2092
-0104
Stanley
No
1-12-350
Pack.
qty
6
414
Please quote the
Woodworking tools
Block plane
"Stanley" With two breakers for different placement of the replaceable blade (kept under the nylon). Adjuster screw
for depth setting. Supplied with two blades.
Art. no.
9820
-0108
Stanley
No
0-12-105
Total length
mm
150
Plane blade width
mm
51
Pack.
qty
2
Spare blades, flat (5)
5671
-0304
Stanley
No
0-12-378
Pack.
10
Hand tools
Block planes
4
Smoothing planes
Smoothing plane
"Stanley" Standard series. With flat or ribbed base. Double iron. The iron is secured using a quick release cam-lock.
Equipped with adjuster nut and adjuster arm for fine adjustment of the irons depth and lateral movement. Parallel milled
seat. External adjuster screw for required shaving opening. Plastic handle and knob. Inside finished in black. With nickelplated breaker.
Total
Irons
Flat base
Ribbed base
length
width
Stanley
Art. no.
Pack.
Stanley
Art. no.
Pack.
mm
mm
No
5193
qty
No
2037
qty
240
45 (1¾")
1-12-003
-0105
1
240
51 (2")
1-12-004
-0204
1
1-12-014
-0201
1
Plane-irons
(for planes of iron)
Plane-iron
"Stanley" For smoothing planes, jack planes and the like.
No 12-312/313, single with hole.
No 12-322/325, double with breaker.
Width
Width
Fits
Single
(nom.
planes
Stanley
Art. no.
size)
inch
mm
12No
2089
1¾
45
003
0-12-312
-0109
2
51
004, 005, 015
0-12-313
-0208
23/8
60
016, 017
-
Pack.
qty
6
6
-
Stanley
No
1-12-322
1-12-323
1-12-325
Double
Art. no.
2090
-0106
-0205
-0403
Pack.
qty
6
6
6
Chisels
Mortise chisel
Mortise chisel
"Stanley" Mortise chisel FatMax. Mortise chisel with through tang and steel impact disc. Heavy-duty two component plastic handle. With edge protector.
Art. no.
15497
-0107
-0206
-0305
-0404
Stanley
No
0-16-251
0-16-252
0-16-253
0-16-254
Width
mm
6
8
10
12
Blade length
mm
125
125
125
125
Pack.
Art. no.
15497
-0503
-0602
-0701
-0800
Stanley
No
0-16-256
0-16-257
0-16-258
0-16-259
Width
mm
15
16
18
20
Blade length
mm
130
130
135
135
Pack.
Art. no.
15497
-0909
-1006
-1105
-1204
Stanley
No
0-16-260
0-16-261
0-16-262
0-16-263
Width
mm
22
25
30
32
Blade length
mm
135
155
155
155
Pack.
Art. no.
15497
-1303
-1402
-1501
-1600
Stanley
No
0-16-264
0-16-265
0-16-266
0-16-267
Width
mm
35
38
40
50
Blade length
mm
155
165
165
165
Pack.
415
Hand tools
4
Woodworking tools
Mortise chisel sets
Mortise chisel set
"Stanley" Mortice chisel set FatMax. Mortise chisel with through tang and steel impact disc. Heavy-duty two
component plastic handle. With edge protector. Supplied in plastic case.
Art. no.
15103
-0103
-0202
Stanley
No
2-16-270
2-16-271
No. of
ea.
3
5
Widths
mm
10 15 20
6 10 15 20 25
Pack.
qty
6
6
Knives
Knife set
Knife set
"Xcelite" Consists of knife handle XN-100 and XN-200 as well as 10 extra knife blades.
Art. no.
0159
-0108
Xcelite
No
XNS-100
Pack.
set
6
Knife blades
Knife blades
"Xcelite" For knife handle no XN-200 and XN-210.
Art. no.
2145
-1109
Xcelite
No
XNB-201
DIY-pack. of
5
Pack.
f
6
-1208
XNB-203
5
6
-1406
XNB-205
5
6
-0905
XNB-103
5
6
-1002
XNB-105
5
6
Knife blades
"Xcelite" For knife handle no XN-100.
Art. no.
2143
Xcelite
No
No. of blades per
DIY-pack
Pack.
f
-0806
XNB-101
5
6
Snap-off blade knives
Snap-off blade knife
"Stanley" Snap-off blade knife. Made of plastic. Supplied with one blade and pocket-clip. Blade width 9 mm.
Art. no.
8575
-0701
Stanley
No
0-10-150
Total length
mm
130
Pack.
qty
12
Ditto loose in box
8575
-0768
Stanley
No
1-10-150
Pack.
qty
24
Loose blades
8575
-0800
Stanley
No
0-11-300
No. of blades
per packet
10
No. of packets per
f
10
Loose blades
8575
-0909
Stanley
No
1-11-300
No. of blades
100
Quantity
f
1
Snap-off blade knife
"Stanley" Plastic snap-off blade knife. With integrated snap-off blade tool. Blade width 18 mm.
Art. no.
7371
-0105
Stanley
No
0-10-151
Total length
mm
160
Pack.
qty
12
Ditto loose in box
7371
-0162
Stanley
No
1-10-151
Pack.
qty
24
Spare blade
7371
-0204
Stanley
No
0-11-301
No. of blades
per pack.
10
Quantity
pack.
10
416
Please quote the
Woodworking tools
7371
No
per pack.
pack.
7371
No
f
-0253
3-11-301
50
1
-0303
1-11-301
100
1
Hand tools
Spare blade
Stanley
No. of blades
Quantity
Spare blade
Stanley
No. of blades
Quantity
4
Universal knives
Universal knife
"Stanley" Made of aluminium.
No 0-10-299 has three blades stored in the handle.
No 2-10-099 has five blades stored in the handle. With retractable blade.
Art. no.
2172
-0107
Stanley
No
0-10-299
G:a orig. no
Total length
mm
145
Pack.
qty
12
Ditto loosein box
2172
Stanley
No
Pack.
-
-0206
2-10-099
99EC
155
12
-1006
1-10-099
12
Knife blades
Knife blades
"Stanley" For knives 10-299, 10-099 and 10-499. (Blades 11-908 and 11-980 do not fit in knives 10-099 and 10-499.)
Industry packs supplied in plastic case. No 11-967 Hook blade, especially designed for thick fitted carpets.
Knife
Retailer cards
Industry pack (100)
length
Stanley
Quantity
Art. no.
Quantity
Stanley
Art. no.
Pack.
per
cards
mm
No
card
2173
No
2173
f
50
0-11-911
5
-0106
10
1-11-911
-0908
1
60
0-11-921
5
-0205
10
1-11-921
-1005
1
50
0-11-983
5
-0304
10
1-11-983
-1104
1
55
0-11-967
5
-0346
10
80
0-11-980
1
-0403
6
60
0-11-952
5
-0601
10
1-11-952
-1203
1
60
0-11-953
5
-0700
10
-
Knife blades
"Stanley" Knife blade with hole in practical plastic storage box (dispenser), also for storage of dull knife blades. 10
blades or bulk pack of 100 blades (10 packs of 10 blades). Suitable for Stanley universal knives 10-299 and 10-099 (blade
11-908 does not fit knives 10-099 and 10-499).
Knife
10-pack
100-pack (10×10)
length
Stanley
Art. no.
Pack.
Stanley
Art. no.
Pack.
mm
No
3422
f
No
3422
f
50
3-11-908
-0103
10
60
3-11-916
-0202
10
6-11-916
-1101
1
50
3-11-802
-0301
10
Industry pack (100)
1-11-908
-1077
1
Knife blades
"Stanley" Knife blades especially designed for use on the specified materials. Fits the most common Stanley Universal
knives. Supplied in practical storage box.
Art. no.
14916
-0103
-0152
-0202
-0301
Stanley
No
2-11-937
2-11-938
2-11-939
2-11-943
For material
Plaster
Paper
Roofing felt
Plastic matting
Model
Straight
Straight
Hook knife
Straight
Knife length
mm
60
60
50
60
No. of blades/box
ea.
10
10
8
10
Pack.
qty
10
10
10
10
417
Hand tools
4
Woodworking tools
Knife blades
"Stanley" Knife blades especially designed for use on the specified materials. Fits the most common Stanley snap-off
blade knives 18 and 25 mm. Supplied in practical storage box.
Art. no.
15468
-0102
-0201
Stanley
No
0-11-319
0-11-326
For material
Plaster
Plaster
Model
Snap-off blade
Snap-off blade
Width
mm
18
25
Total length
mm
108
108
No. of blades/box
ea
10
10
Knife blades
"Stanley" Knife blades especially designed for use on the specified materials. Fits the most common Stanley snap-off
blade knives 18 and 25 mm. Supplied in practical storage box.
Art. no.
15469
-0101
-0200
Stanley
No
0-11-322
0-11-327
For material
Insulation
Insulation
Model
Not snap-off
Not snap-off
Width
mm
18
25
Total length
mm
108
108
No. of blades/box
ea
10
10
Folding knifes
Folding knife
"EKA" Small pocket knife with stainless blade. Grey, hard wearing plastic handle with hole for hanging or for leather
cord.
Art. no.
2789
-0102
EKA
No
Compact 793501
Blade length
mm
60
Length, extended / Length, folded
mm
150 / 90
Pack.
qty
10
Electricians knife
Electricians knife
"Hultafors" Electricians knife The grinding of the blade edges and the design of the handle are optimised for cable
stripping. Blade of 1.5 mm carbon steel hardened to 58-60 HRC. The handle and sheath are manufactured of extra impact resistant PP plastic. Unique method for attaching the sheath around a button on workwear makes it easy to loosen,
and easy to remove.
Art. no.
13520
-0103
-0202
Orig. no
ELK-RIGHT
ELK-LEFT
Design
Righ hand
Left hand
Blade length
mm
33
33
Total length
mm
158
158
Pack.
qty
10
1
Painters knife
Painters knife
"Hultafors" Painters knife Knife with slot screwdriver and can opener. Blade of 2.5mm carbon steel hardened to
58-60 HRC. The edges are sharpened in several stages with a final honing on leather disc. The handle and sheath are
manufactured of extra impact resistant PP plastic. Unique method for attaching the sheath around a button on workwear
makes it easy to loosen, and easy to remove. Fits the same sheath as knife 13515.
Art. no
13522
-0101
Orig. no
MT
Blade length
mm
93
Total length
mm
208
Pack
qty
10
Plumbers knife
Plumbers knife
"Hultafors" Plumbers knife Matt chromium-plated blade with file for deburring. Blade of 2.5mm carbon steel
hardened to 58-60 HRC. The edges are sharpened in several stages with a final honing on leather disc. The handle and
sheath are manufactured of extra impact resistant PP plastic. Unique method for attaching the sheath around a button
on workwear makes it easy to loosen, and easy to remove. The knife fits the same sheath as knife 13515.
Art. no
13521
-0102
Orig. no
Plumbing
Blade length
mm
93
Total length
mm
208
Pack
qty
10
418
Please quote the
Woodworking tools
Mineral wool knife
Wide, flexible blade. Hardened and serrated blade for cutting mineral wool longer and more efficiently. Etched scale
(centimetre) on the blade. Wooden handle.
2084-0104. Especially suitable for Rockwool-insulation. Serrated blade.
2084-0203. Especially suitable for Gullfiber insulation. Serrated blade.
Art. no.
2084
-0104
-0203
For insulation
type
Rockwool
Gullfiber
Packaging colour
red
yellow
Total length
mm
475
475
Blade length
mm
300
300
Blade width
mm
40
40
Pack.
qty
1
1
Hand tools
Mineral wool knives
4
Roofing felt knifes
Roofing felt knife
"Mora" With curved carbon steel blade suitable for roofing felt and carpets. Polypropylene handle.
Art. no.
10912
-0105
Mora
No
173 P
Total length
mm
193
Blade length
mm
60
Pack.
qty
10
Case-knifes
Sheath knife
"Mora" Blade of polished special carbon steel. Hardened to RC 60, which gives maximum sharpness, strength and ductility. Handle of enamelled birch with a new especially safe attachment. Plastic sheath.
Art. no.
2195
-0209
-0407
-0506
-0704
Mora
No
2/0
1
2
3
Blade length
mm
75
95
108
155
Length with sheath
mm
185
215
245
290
Pack.
qty
10
10
10
10
Sheath knife
"Mora" Blade of polished special carbon steel and guard. Hardened to RC 60, which gives maximum sharpness,
strength and ductility. Handle of enamelled birch with a new especially safe attachment. Plastic sheath with snap-in fastening.
Art. no.
8927
-0102
-0201
Mora
No
611
612
Blade length
mm
100
110
Length with sheath
mm
215
245
Pack.
qty
10
10
Sheath knife
"Luna" Polished knife blade. Hardened to RC 60 respective RC 58, which gives maximum sharpness, strength and ductility. Impact resistant plastic handle with finger guard. Plastic sheath which also covers the knifes finger guard.
No 9128. Special carbon steel blade. Red plastic handle.
No 9165. Stainless blade. Blue plastic handle.
Blade
Total
No 9128
No 9165
length
length
With carbon steel blade
With stainless blade
Orig.Art. no.
Pack.
Orig.Art. no.
Pack.
mm
mm
No
9128
qty
No
9165
qty
100
210
511
-0107
10
546
-0101
10
110
220
521
-0206
10
556
-0200
10
Sheath knife
"Miki" Polished knife blade. Hardened to RC 60 respective RC 58, which gives maximum sharpness, strength and ductility. Impact resistant plastic handle with finger guard. Plastic sheath which also covers the knifes finger guard.
Red marking. Special carbon steel blade.
Blue marking. Stainless blade.
Blade length
Total length
With carbon steel blade
With stainless blade
Art. no.
Pack.
Art. no.
Pack.
mm
mm
13500
qty
13500
qty
100
225
-0305
15
-0404
15
100
225
-0107
60
-0206
60
419
Hand tools
4
Woodworking tools
Sheath knife - display
"Mora" Bulk pack - 60 resp. 30 knives per box. Polished blade. Hardened to RC 60 resp. RC 58, which gives maximum sharpness, strength and ductility. Ergonomically designed handle of continuous, impact resistant plastic covered with rubber for assured grip.
No 1742. Carbon steel blade. Red colour markings on the handle.
No 1748. Stainless steel blade. Blue colour markings on the handle.
Art. no.
1742-0506
1748-0500
Mora
No
711
746
Blade length
mm
100
100
Total length
mm
240
240
Pack.
qty
60
30
Sheath knife
"Mora" Stainless blade of contour ground chrome-manganese steel. Special hardening method that makes the knife
extra sharp. Green rubber handle for assured grip. Plastic sheath.
Art. no.
4418
-0107
Mora
No
Mora 2000
Blade length
mm
115
Total length
mm
230
Pack.
qty
10
Sheath knife - display
"Mora" Bulk pack - 15 knives per box. Knives with stainless blades of contour ground chrome-manganese steel. Special
hardening method that makes the knife extra sharp. Green rubber handle for assured grip. Plastic sheath.
Art. no.
4418
-0503
Mora
No
Mora 2000
Blade length
mm
115
Total length
mm
230
Pack.
qty
15
Sheath knife - chisel knife
"Hultafors" Chisel knife with V ground chisel function. The edges are sharpened with a double edge angle and
a final honing on a leather disc. Blade of 3 mm carbon steel hardened to 58-60 HRC. The handle and sheath are manufactured of extra impact resistant PP plastic. Unique method for attaching the sheath around a button on workwear
makes it easy to loosen, and easy to remove. The knife fits the same sheath as knife 13519.
Art. no.
13518
-0107
-0206
Orig. no
STK
STK - PH
Design
with sheath
without sheath
Blade length
mm
72
72
Total length
mm
201
201
Pack.
qty
1
1
Sheath knife - coarse knife
"Hultafors" Coarse knife. A more robust and durable ground knife for coarse work. The edges are sharpened using
double edge angle with a final honing on leather disc. Blade of 3 mm carbon steel hardened to 58-60 HRC. The handle
and sheath are manufactured of extra impact resistant PP plastic. Unique method for attaching the sheath around a button on workwear makes it easy to loosen, and easy to remove. The knife is more powerful and therefore has a larger
sheath.
Art. no.
13519
-0106
-0205
Orig. no
GK
GK - PH
Design
with sheath
without sheath
Blade length
mm
94
94
Total length
mm
222
222
Pack.
qty
10
1
Sheath knife - Craftsmans knife
"Hultafors" Craftsmans knife with blade of 2.5 mm carbon steel hardened to 58-60 HRC. The edges are sharpened in several stages with a final honing on leather disc. The handle and sheath are manufactured of extra impact resistant PP plastic. Unique method for attaching the sheath around a button on workwear makes it easy to loosen, and
easy to remove.
Art. no.
13515-0100
13516-0109
Orig. no
HVK
HVK - ELK
Design
with sheath
without sheath
Blade length
mm
93
93
Total length
mm
208
208
Pack.
qty
10
10
Ditto 50 pack
13526
-0107
Pack.
qty
50
Ditto 100 pack
13526
-0206
Orig. no
HVK 100
Pack.
qty
100
-
420
Please quote the
Woodworking tools
"Hultafors" Craftsmans knife with blade of 2.5 mm stainless steel hardened to 57-59 HRC. The edges are
sharpened in several stages with a final honing on leather disc. The handle and sheath are manufactured of extra impact
resistant PP plastic. Unique method for attaching the sheath around a button on workwear makes it easy to loosen, and
easy to remove. The knife fits in the same sheath as 13515.
Art. no.
13517
-0108
-0207
Orig. no
RFR
RFR - PH
Design
with sheath
without sheath
Blade length
mm
93
93
Total length
mm
208
208
Pack.
qty
1
1
Ditto 50-pack
13517
-0306
Orig. no.
RFR-50
Pack.
-
Hand tools
4
"Hultafors" Two craftsmans knives in a double holster of impact resistant PP plastic joined by rivets and hardwearing
leather. Unique method for attaching the sheath around a button on workwear makes it easy to loosen, and easy to
remove. See 13515 for information on the knife.
Art. no
13523
-0100
Orig. no
HVK - HVK
Blade length
mm
93
Total length
mm
208
Pack
qty
5
"Hultafors" A a coarse knife and a craftsmans knife in a double holster of impact resistant PP plastic joined by rivets
and hardwearing leather. Unique method for attaching the sheath around a button on workwear makes it easy to loosen,
and easy to remove. See 13519 and 13515 for information on the knives.
Art. no
13524
-0109
Orig. no
HVK-GK
Blade length
mm
94/93
Total length
mm
222/208
Pack
qty
5
"Hultafors" A craftsmans knife and an electricians knife in a double holster of impact resistant PP plastic joined by
rivets and hardwearing leather. Unique method for attaching the sheath around a button on workwear makes it easy to
loosen, and easy to remove. See 13515 and 13520 for information on the knives.
Art. no
13525
-0108
Orig. no
HVK - ELK
Blade length
mm
93/33
Total length
mm
208/158
Pack
qty
5
Chisel knife - Craftsmans knife
"Hultafors" A chisel knife and a craftsmans knife in a double holster of impact resistant PP plastic interconnected by
a rivet and heavy-duty leather. Unique method for attaching the sheath around a button on work wear makes it easy to
loosen, and easy to remove. See 13515 and 13518 for information about knives.
Art. no.
14365
-0109
Orig. no
HVK - STK
Blade length
mm
72/93
Total length
mm
222/208
Pack.
qty
5
Electricians knife and chisel knife
"Hultafors" An electricians knife and a chisel knife in a double holster of impact resistant PP plastic interconnected by
a rivet and heavy-duty leather. Unique method for attaching the sheath around a button on work wear makes it easy to
loosen, and easy to remove. See 13520 and 13518 for information about knives.
Art. no.
14366
-0108
Orig. no
ELK - STK
Blade length
mm
33/72
Total length
mm
158/201
Pack.
qty
1
421
Hand tools
4
Woodworking tools
Hinge aligners
Hinge aligners
No 1. With two different hole diameters for straightening window and door hinges. Galvanized.
No 2. For garage and industrial doors.
Art. no.
2263
-0107
-0206
Size
No
1
2
Total length
mm
300
320
Hole diameter
mm
14×17
19×22
Hole depth
mm
35
45
Pack.
qty
1
1
Hinge alingers
Hinge aligner for symmetrical doors.
Art. no.
Total length
Hole diameter
Hole depth
Pack.
6664
mm
mm
mm
qty
-0103
220
13
17
1
Crowbars
Crowbar
"Stanley" Made of hardened spring steel. Thin and light for good access. For extracting nails. Bevelled and polished
working surfaces.
Art. no.
0864
-0104
-0302
Stanley
No
1-55-515
1-55-526
Length
mm
340
530
Width
mm
45
45
Pack.
qty
4
4
Crowbar
"Stanley" Small handy Mini-Crowbar of powerful spring steel.
Art. no.
14826
Stanley
No
Length
mm
Width
mm
Pack.
qty
-0102
1-55-045
190
23
6
Crowbar
"Hultafors" Made of octagonal special alloyed steel. Fully quenched and tempered. Fine ground, polished and clear
varnished working surfaces. Red finish.
Art. no.
7334
-0051
-0101
-0200
-0309
-0408
Hultafors
10912
20
25
28
36
Length
mm
300
500
625
710
900
Material dim. mm
14
16
16
18
20
Weight
kg
0.6
0.95
1.4
2.2
2.7
Pack.
qty
2
2
2
2
2
Wrecking bars
Spit bars
Spit bar
"Hultafors" Square head. Octagonal, red grip.
Art. no.
2284
-0102
Hultafors
No
SP 5
Length
mm
1200
Weight
kg
5
Pack.
qty
1
422
Please quote the
-0201
SP 6
1350
6
1
-0300
SP 7
1500
7
1
-0359
SP 7 Pik
1500
7
1
-0409
SP 8
1650
8
1
Woodworking tools
Aluminium spit bar
"Hultafors" Aluminium spit bar with round grip. A strong as steel but lighter.
No B1500FSP. With reinforced point.
No P1500FSP. Heel-bar with reinforced point - wrecking bar. With reinforced attachment of the steel point.
Length
Aluminium pry bar
Aluminium pry bar with steel point
Hultafors
Weight
Art. no.
Pack.
Hultafors
Weight
Art. no.
Pack.
mm
No
kg
6449
qty
No
kg
6449
qty
1200
B1200
2.1
-0105
1
B1200S
2.7
-0204
1
1500
B1500S
3.6
-0402
1
1500
B1500
2.8
-0303
1
B1500FSP
4.5
-0253
1
1500
P1500FSP
4.5
-0501
1
Hand tools
Aluminium spit bar
4
Pick axes with handle
Pickaxe with handle
The pick points are quenched and tempered. Supplied with loose handle.
Art. no.
2286
Weight
kg
Length
mm
Eye dim.
mm
Pack.
qty
-0209
4
700
72×40
1
Wood-choppers wedge
Wood-choppers wedge
"Hultafors" Straight steel wedge, polished and red finish.
Art. no.
2239
Hultafors
No
Width, shank
mm
Weight
kg
Pack.
qty
-0108
VK 1200
50
1.2
2
Axes
Trekking axes
Trekking axe
"Hultafors" Sandblasted axe head varnished before mounting on a hickory handle. Secured using bother wood and
metal wedges. Drilled hanging hole.
Art. no.
2240
-1053
-1103
-1202
Hultafors
No
H 006
H 008
H 009
Model
Scout
All round
Vedbod
Weight
kg
0.6
0.8
0.9
Handle length
mm
375
440
500
Eyes size
mm
50×20
50×20
50×20
Pack.
qty
4
4
4
Joiners axes
Carpenters axe
"Hultafors" With long thin blade. Sandblasted axe head varnished before mounting on a hickory handle. Secured using
both wood and metal wedges. Drilled hanging hole.
Weight
Handle
Eyes
Hultafors SY 21
Hultafors SY 21
length
size
straight handle
curved handle
Art. no.
Pack.
Art. no.
Pack.
kg
mm
mm
2252
qty
2252
qty
0.8
500
50×20
-1009
4
-1207
4
1.0
500
50×20
-1108
4
-1306
4
Sledge-axe
Sledge-axe
"Hultafors" Sandblasted axe head varnished before mounting on a hickory handle. Secured using both wood and metal
wedges. Drilled hanging hole.
Loose handle art. no. 1519-0309.
Art. no.
2260
-1009
Hultafors
No
SLY 141
Weight
kg
2.5
Handle length
mm
800
Eyes size
mm
55×27
Pack.
qty
2
423
Hand tools
4
Woodworking tools
Handsaws
Three phase toothing
Handsaw
"Stanley" 3-bevelled hardened tooth points. Handsaw. Screwed two component handle with angle stop 90 and 45
degrees against the back of the saw blade.
Art. no.
14695
-0100
Stanley
No
1-20-088
Length
mm
550
No. of teeth (universal)
per inch
8
Blade thickness
mm
0.85
Pack.
qty
6
Universal toothing
Handsaw
"Stanley" Universal toothing. Hardened tooth points. Plastic handle - designed as an angle stop at 90° and 45° towards
the back of the saw blade.
Art. no.
8600
-0502
Stanley
No
6-97-055
Length
mm
550
No. of teeth (universal)
per inch
7
Blade thickness
mm
0.85
Pack.
qty
50
Handsaw
"Stanley" Type Jet-Cut. FatMax. With "Appliflon" coating on the entire blade. "Appliflon" improves the glide and
also protects against rust. Hardened tooth points. Precision ground extremely sharp teeth. The third cutting angle on
the point of the teeth provides effective removal both forwards and backwards. The design of the toothing means faster
sawing and a splinter free cut. Heavy-duty ergonomic handle. The saws are equipped with blade sheath.
Art. no.
11874
-0109
-0208
-0307
Stanley
No
2-20-528
2-20-529
2-20-530
Length
mm
375
500
550
No. of teeth
per inch
7
7
7
Blade thickness
mm
1.0
1.0
1.0
Pack.
qty
4
4
4
Handsaw
"Stanley" Type Jet-Cut. Fine toothed. Hardened tooth points. Precision ground extremely sharp teeth. the third
cutting angle on the point of the teeth means faster sawing and gives a splinter free cut. The handle design makes up a
90° and 45° angle stop towards the back of the saw blade.
Art. no.
0889
-0055
-0105
-0204
Stanley
No
2-15-594
2-15-599
2-15-244
Length
mm
400
500
550
No. of teeth
per inch
11
11
11
Blade thickness
mm
1.0
1.0
1.0
Pack.
qty
6
6
6
Back saws
Back saw
"Stanley" Hardened tooth points. Polished blade with steel back. Universaltandning with ground teeth. Plastic handle
- designed as an angle stop with 90° and 45° to the back of the saw blade. (Used in Stanley mitre boxes 1-19-112 and 120-112.
Art. no.
2317
-0103
Stanley
No
1-15-255
Length
mm
350
No. of teeth
per inch
13
Max. cutting depth
mm
80
Pack.
qty
4
Japan saws
Japan saw
Cabinet-making saw with a toothing set of 18.5 TPI Soft and flexible blade with back guide. Wound wooden handle.
Art. no.
12637
-0105
Blade length
mm
240
Blade thickness
mm
0.3
Total length
mm
550
Pack.
qty
10
424
Please quote the
Woodworking tools
Double toothed cabinet-maker saw with toothing set for cutting at 15 TPI and progressive split toothing. Soft and flexible
blade for sawing in difficult positions. Wound wooden handle.
Art. no.
12214
-0106
Blade length
mm
240
Blade thickness
mm
0.8
Total length
mm
590
Pack.
qty
10
Hand tools
Japan saw
4
Compass saws
Keyhole saw
"Stanley" Hardened tooth points. Universal toothing. Ground and set. Plastic handle.
Art. no.
9281
-0100
Stanley
No
1-15-511
Blade length
mm
300
Toothing length
mm
290
No. of teeth (resaw)
per inch
9
Pack.
qty
4
Universal saws
Universal saw
"Teng Tools" With replacable blade for wood and metal. The blade can be locked in 4 different positions - locked
with a chuck. Supplied complete with two saw blades - one for wood and one for metal.
Art. no.
2009
-0106
Teng Tools
No
703
Overall length
mm
330
Quantity
f
6
Saw blade
2009
-0205
-0304
Teng Tools
No
703-10
703-24
For
wood
metal
No. of teeth
per inch
10
24
Pack.
qty
1
1
Universal saw
Made of round steel bar. With plastic finger support. (Suitable blades see 4439.)
Art. no.
4440
-0208
Blade length
mm
150
Frame depth
mm
50
Pack.
qty
1
Universal saw
"Teng Tools" Junior hacksaw for working in wood, metal, plastic etc. The blade can be locked in six different positions.
Supplied with two spare blades.
Art. no.
6936
-0105
Teng Tools
No
705
Blade length
mm
150
Frame depth
mm
50
Pack.
qty
12
5 spare blades
6936
-0204
Teng Tools
No
705-5
Pack.
set
20
Universal saw blade
Universal saw blade
Saw blade lengths of 150 mm (145 mm between the securing pins) fit in universal saw frames.
Art. no.
4439
-0201
-0300
For sawing
Metal
Wood
No. of teeth
per inch
32
14
Blade length
mm
150
150
No. of blades
per DIY-pack.
12
12
No. of DIY-cards per
f
1
1
425
Hand tools
4
Woodworking tools
Bow saws
Construction saws
Construction saw
"Stanley" Made of oval steel tube. Handle with knuckle guard. Supplied with saw blade.
No 1-20-447 supplied with an extra hacksaw blade.
Art. no.
0265
-0109
-0208
-0307
Stanley
No
1-20-447
1-15-379
1-15-368
Length
inch
12
21
24
Length
mm
300
530
610
Blade width
mm
20
20
20
Pack.
qty
12
12
12
-0406
1-15-403
30
760
20
12
Bow saw blades
Bow saw blades
"Stanley" Hardened tooth points, straight, fine toothed bow saw blades.
Art. no.
9284
-0057
-0107
Stanley
No
1-20-437
1-15-382
Length
inch
12
21
Length
mm
300
530
Blade width
mm
20
20
Pack.
qty
10
10
-0206
1-15-385
24
610
20
10
-0305
1-15-388
30
750
20
10
Mitre boxes
Mitre box
Made of hardwood. With clamping edge and hanging hole. Also fitted with "horizontal slot" for mitre sawing of battens,
max. 100 mm. For sawing mitres 45° or 90°.
Art. no.
2366
-0509
Length
mm
450
Height
mm
50
Inner width (horizontal height)
mm
100
Pack.
qty
1
Mitre saws
Mitre saw
"Nobex" Type 110 Proman. Die-cast aluminium table with heavy-duty steel feet. Aluminium saw frame. Toothpoint hardened saw blade. Robust, glass fibre reinforced polycarbonate guides with low friction against the saw. Fixed
setting positions for producing frames with 4, 5, 6, 8 or 12 corners and a position for cutting at 90°. Angle setting - completely play free and easy-to-release. Fixed position to tilt the workpiece at different angles for double mitring. Flexible material clamp for different material types. Fixed angles 20°, 25°, 30°, 35°, 40°, 45°, 50° and 55°. Length stop for
settings up to 720 mm, where the length stop is pulled out of the saw table. Automatic saw suspension that simplifies
the setup of the workpiece. Length scale on table. Transport bracket on the table for setting the saw frame parallel to
the table when transporting or storing.
Art. no.
4469
-0105
Proman
No
PRM-110
Table length
mm
350
Blade length
mm
565
Cutting width 90°
mm
160
Cutting width 45°
mm
100
Saw depth
mm
110
Weight
kg
3.0
Pack.
qty
1
Extra material clamp new mod.
4469
-0303
Height stop
1192
-0170
Art. no.
3834
-0204
-0303
-0402
-0501
Intended for
wood
wood andmetal wood andmetal metal
No. of teeth
per inch
12
18
24
32
Pack.
qty
1
1
1
1
Mitre saw blades
Mitre saw
Mitre saw blade with high quality, Japanese, 3-edge toothing pattern suitable for Nobex Mitre saw Champion 180.
Saws quickly with maintained tolerance and unique finish on all types of woods. 4-5 times longer life than standard blades.
Art. no.
14707
-0106
Nobex
No
CH 16 JP
Intended for
wood
No. of teeth
per inch
16
Pack.
qty
1
426
Please quote the

Chapter 04 Hand tools

Transcription

Similar documents

ብላዕ¶ንከርስኻ¶ፍረድ¶ንነብስኻ

wooden separè dettagli dettagli