The Camera Store Catalogue 2011

Transcription

The Camera Store
Catalogue 2011
The Camera Store
We would like to introduce the
new TCS brochure for 2011-2012.
The Camera Store is an
equipment rental business
specialising in camera mounting
and support equipment for the
television industry.
TCS was started in 1996 as a
privately run business set up by
three television cameramen. In
2008 the business was sold to
The Vitec Group Plc, who own
companies such as: Vinten,
Sachtler, Litepanels & Manfrotto,
to name a few. The Camera Store
shares its Twickenham office and
warehouse with Autoscript
(Prompters for TV, film and
conferencing), who are a
sister company also owned
by The Vitec Group.
We supply television equipment,
big and small, from heavy duty
television camera pedestals to
small items like script card holders
for camera operator’s shot cards.
From our base in Twickenham, we
transport equipment all around
the UK and other parts of Europe.
TCS employs experienced service
engineers to maintain our kit to
the highest standards ensuring
reliability in the field.
A new introduction to our range of
equipment is the Vinten Vector 430
pan & tilt head. (pictured below ) We
hope it becomes a customer favourite
as it is suited to many applications in
the field. We are also now stocking
Sachtler & OConnor equipment to
broaden our range. We hope you find
the information enclosed useful.
Tim Highmoor & David Fader
Rates published in this brochure come
into effect from 1st January 2012 but
in the meantime our 2010 rates stay
current throughout 2011. For 2010
rates, please refer to our website.
Contents
Pedestals
Heads & tripods
Skids
Mountings
Vinten Classics
Penguin dolly
Vision 30 head/kit
Dolphin arms
Lighting
Accessories
Location
Terms
The Camera Store
Unit 2, Heathlands Close,
Twickenham, Middlesex TW1 4BP
t: +44 (0)20 8891 8910
m: +44 (0)7774 264939
e: hire@thecamerastore.co.uk
w: www.thecamerastore.co.uk
2-9
10-17
18
19
20
20
21
22-23
24-26
28
29
58.7"
studio pedestals
The Vinten Quattro is a unique and innovative
four–stage pedestal with an extensive range
of benefits for today’s camera operator. The
Quattro–L studio pedestal provides an
extensive height range and the opportunity
to achieve lower angle shots, as well as an
impressive on–shot stroke of 100 cm (39.4”).
A revolutionary pneumatic design
ensures that the Quattro pedestals provide
Perfect Balance throughout their four–stages
of elevation, ensuring that they offer the
exact support required for the camera
operator to raise and lower the camera with
minimal effort.
149 cm
Quattro L
Note: Can be supplied with large or small
steering ring. Delivery and collection by TCS
only. This pedestal can be pressurised using
the Vinten portable pump.
Colour:
105 kg (231.5 lbs)
46.2 cm (18.2")
149 cm (58.7")
100 cm (39.4")
158 kg (348.4 lb)
59 cm (23.2”)
74 cm (29")
92.4cm (36.4")
7.5 kg (16.5 lbs)
Black only
Minimum Tracking Width 92.4 cm
2
18.2"
Specifications
Capacity:
Minimum Height:
Maximum Height:
On–Shot Stroke:
Weight:
Small Steering Ring Diameter:
Large Steering Ring Diameter:
Minimum Tracking Width:
Trim weights:
46.2 cm
Rates – from 1st January 2012
Daily rate £120,
Weekly rate (4-7 days) £480
147 cm
57.8"
18.5"
studio pedestals
The Vinten Quattro–SL, a compact pedestal
designed for multi–camera studio locations, is
perfect for the increasing number of restricted
sets and smaller studios around the world.
Incorporating most of the features of the
larger Quattro pedestal, the Quattro–SL easily
tracks through confined spaces and can work
in close proximity to other pedestals.
47 cm
Quattro SL
steering ring. Delivery and collection by TCS
only. This pedestal can be pressurised using
the Vinten portable pump.
Daily rate £120,
Specifications
Capacity:
Minimum Height:
Maximum Height:
On–Shot Stroke:
Weight:
Footprint:
Minimum Tracking Width:
Trim weights:
Colour:
80 kg (176.4 lbs)
47 cm (18.5")
147 cm (57.8")
100 cm (39.4")
136 kg (300.6 lb)
80.6 x 74.5 cm
(31.8" x 29.4")
74.5 cm (29.3")
59 cm (23.2")
74 cm (29")
7.5 kg (16.5 lbs)
Black only
telephone +44 (0)20 8891 8910
3
58.7"
studio/OB pedestals
The Vinten Quattro–OB outside broadcast
pedestal provides an extensive height range
and the opportunity to achieve lower angle
shots, as well as an impressive on–shot stroke
of 100 cm (39.4“).
A revolutionary pneumatic design ensures
that the Quattro pedestals provide Perfect
Balance throughout their four–stages of
elevation, ensuring that they offer the exact
support required for the camera operator to
raise and lower the camera with minimal effort.
Cable guards make this pedestal effective for
studio use as well. A brake fitted can lock one
set of wheels if required.
149 cm
Quattro OB
steering ring. Delivery and collection with
tail lift vehicle only. This pedestal can be
pressurised using the Vinten portable pump.
Specifications
Capacity:
Minimum Height:
Maximum Height:
Weight:
On–Shot Stroke:
Tracking Width:
Transit Width:
Wheel Diameter:
Trim Weights:
Ground Clearance:
Colour:
100 kg (231.5 lbs)
46.2 cm (18.2")
149 cm (58.7")
158 kg (348.4 lb)
100 cm (39.4“)
98 cm (38.5“)
87 cm (34.2“)
20 cm (7.8“)
59 cm (23.2“)
74 cm (29“)
7.5 kg (16.5 lbs)
5 cm (2“)
Black or Grey
Minimum Tracking Width 87 cm
4
18.2
46.2 cm
Daily rate £120,
153 cm
60"
21"
tracking
The Skquattro is a new tv camera mounting
introduced to give camera operators and
directors the opportunity to achieve different
shots and angles from a pedestal on track.
TCS was asked to come up with a way to get
a pedestal shot on track. The mounting needed
to achieve low and high angles as well as move
from side to side in a restricted area of a
theatre. Normally a ride on film dolly employing
a grip would have been used, but on this
occasion the cameraman wanted to elevate and
depress the column himself while keeping his
eyes in the viewfinder. A prototype was
produced which did everything the client
needed. From that the Skquattro has evolved
and is now being used on some of the biggest
productions in British television.
54 cm
Skquattro
Note: For information about track which is
available to hire see page 7.
steering ring. Delivery and collection with
tail lift vehicle only. This pedestal can be
pressurised using the Vinten portable pump.
Daily rate £150,
Specifications
Capacity:
Minimum Height:
Maximum Height:
On–Shot Stroke:
Tracking Width:
100 kg (231.5 lbs)
54 cm (21")
153 cm (60")
99 cm (39“)
68.5 cm (27“)
telephone +44 (0)20 8891 8910
5
143 cm
56"
26"
studio/OB pedestals
The Vinten Osprey Elite is extremely versatile,
designed to support portable and full facility
cameras for both studio and OB productions.
The studio version of the Osprey Elite
includes cable guards, whilst the larger wheels
of the OB version offer greater ground
clearance. Both versions have an exceptional
combination of lightness and structural
integrity giving maximum stability whilst still
allowing the column and dolly base to fold for
easy transportation. The Osprey Elite is also
ideal for use on track when combined with
Vinten’s Tracking Skid.
66 cm
Osprey Elite
Note: For information about the tracking skid
and track which is available to hire see page 7.
Daily rate £95,
Specifications
Capacity:
Minimum Height:
Maximum Height:
Weight:
On–Shot Stroke:
Tracking Width:
Wheel Lock:
Transit Width:
Narrow Transit Width:
Wheel Diameter:
Steering Ring Diameter:
Trim Weights:
Colour:
75 kg (165 lbs)
66 cm (26")
143 cm (56")
46 kg (101 lbs)
77 cm (30“)
97 cm (38“)
Yes
80 cm (31.5“)
70 cm (27“)
12.5 cm (5“)
53.5 cm (21“)
3 kg (6.5 lbs)
Black or Grey
Minimum Tracking Width 70 cm
6
Other Osprey Mounts
mountings
The Vinten Osprey Elite Static
Base
A static base for use in confined locations such as
sports and concert venues. The Osprey column can
be removed for split transportation. A flight case is
available.
Daily rate £95, Weekly rate (4-7 days) £380
Specifications
On–Shot stroke
Maximum Height:
Minimum Height:
Heavy base with high adjusters:
Payload Capacity
76.2 cm (30’)
142.2 cm (56'')
66 cm (26'')
61 sq cm (24 sq’’)
75 kg (165 lbs)
The Vinten Osprey 2 Stage
Static Base
A static base for the Osprey pedestal 2 stage
column is available for use in confined locations.
Specifications
Maximum Height:
Minimum Height:
Transport Width at Base:
Transport Weight:
Payload Capacity
148 cm (58'')
66 cm (26'')
55.5 cm (22'')
26 kg (58 lbs)
55 kg (121 lbs)
The Vinten Osprey Base with
Fixed Column
An Osprey Elite base fitted with a fixed column,
steerable with a tiller bar – ideal for use with a
Dolphin Arm. (see page 21)
Daily rate £65,
Specifications
Payload Capacity:
90 kg (200 lbs)
Total Weight:
30 kg (66 lbs)
Weight of Column:
5.5 kg (12 lbs)
Maximum Height (on skid with studio wheels):
83 cm (32'')
Note: Can be supplied with studio wheels
telephone +44 (0)20 8891 8910
7
Tracking Osprey
tracking
Tracking Skid
Offering Osprey pedestals and Vinten tripods the
ability to operate on track.
Rates– from 1st January 2012
Daily rate £40 if ordered on its own or
£30 when ordered with an Osprey Elite
Pedestal
Weekly rates (4-7 days) £160/£120
Specifications
Weight:
11 kg (24.3 lbs)
Capacity:
160 kg (353 lbs)
Transport size:
36 x 23 x 64 cm (14" x 9" x 26")
Track width Operation:
62 cm (24.4")
Tracking dolly (grey or black)
6.2 cm quad wheels
Camera Track
We can also offer a 762 cm (25’) diameter circular
track. Please ask for Speedtrack. £25 per curve, 8
sections make a full circle.
Daily rates:
8’ section £24
6’ section £18
4’ section £12
2’ section £6
Curve £24
Track wedges £15
Centre of track to opposite centre:
595 cm (19’ 6”)
8 Sections make a full circle
Track width (centre to
centre) 61.6 cm (24.25”)
Grip box contains
approximately 50 track
wedges. £15 per day
8
tracking
Osprey Elite Pedestal on
tracking skid at the ‘Proms’.
telephone +44 (0)20 8891 8910
9
Vector 700/700H/750
studio/OB heads
Vinten Vector 700/700H
The Vector 700 Studio/OB pan & tilt head
provides 120° of perfectly balanced tilt for cameras
fitted with long lenses. A Vector 700 H is also
available for those using cameras with a high
centre of gravity.
Daily rate £55, Weekly rate (4-7 days)
£220
Specifications
Height: (to top of wedge adaptor)
Length:
Width:
Weight:
Tilt Range:
Capacity:
Platform Adjustment:
Pan Bar:
Camera Fixing:
Levelling Bubble:
Base Fixing:
25.5 cm (10")
35.5 cm (14")
35 cm (13.5")
17.85 kg (39.5 lbs)
±52º
70 kg (154 lbs)
33 cm (13")
Two Telescopic
Wedge Adaptor
Illuminated
4 bolt flat
Vinten Vector 750
With the Vector 750, Vinten has taken the
functionality and durability of the acclaimed Vector
700 Standard and ‘H’ versions and incorporated
them into one versatile new product. New features
include an improved slide plate positioner.
Daily rate £55,
Specifications
25.5 cm (10")
Length:
35.5 cm (14")
Width:
35 cm (13.5")
Weight:
17.9 kg (39.5 lbs)
Tilt Range:
±52º
Capacity:
75 kg (165.3 lbs)
33 cm (13")
Pan Bar:
Two Telescopic
Camera Fixing:
Wedge Adaptor
Levelling Bubble:
Illuminated
Base Fixing:
4 bolt flat with Quickfix groove
10
Vector 950/950
studio/OB heads
Vinten Vector 950
The Vector 950 offers an increased capacity of up to
120 kg and at this payload provides ±60° of perfectly
balanced tilt, allowing the safe control of today’s
long OB lenses.
The compact and durable Vector 950 head
incorporates a wealth of features. Set–up is aided
through the inclusion of a tilt deadlock, Quickfix groove
in the base, retractable carry handle and illuminated
controls, as well as an LCD display that offers a 24 hour
clock, stopwatch and counter–balance readout.
Specifications as Vector 950 Active below.
Vinten Vector 950
Vinten has developed the Vector 950 Active pan and
tilt head system to interface with the Canon Optical
Shift Image Stabiliser (‘Shift–IS’) technology.
The Vector 950 Active C4 system, which
communicates with Canon’s AF100X and
AF86Xlenses; comprising of the Vector 950OE head
with optical encoders (V3984–0001) and C4 Active
serial box (ASB–VIN–C4). The Vector 950 Active C2
system, which communicates with Canon’s Type 2
100x, 86X and 75X lenses; comprising of the Vector OE
head with optical encoders (V3984–0001) and C2
Active serial box (ASB–VIN–C2). Supplied with Anton
Bauer battery kit.
Daily rate £70,
telephone +44 (0)20 8891 8910
Specifications
24.8 cm (9.8")
Length:
22.5 cm (8.9")
Width:
34.2 cm (13.5")
Weight:
16.6 kg (36.6 lbs)
Tilt Range:
@ 60 kg ±90° @ 120 kg ±60°
Capacity:
120 kg (264.5 lbs)
5.5 – 12.5 cm (2.2" – 4.9”)
Pan Bar:
Two Telescopic
Camera Fixing:
Wedge Adaptor
Counterbalance:
Fully variable/digital readout
Base Fixing:
4 bolt flat with Quickfix groove
Colour:
Black
11
Vector 950/750/700 kits
OB heads & tripods
Vinten Vector 950 kit
A Vector 950 head and heavy–duty tripod (and
skid) are available to hire as a kit. The options
are: head, HD1 tripod or HD2 tripod or HD1 tripod
with elevator. A skid can also be added.
Head & HD1 or HD2 tripod
Daily rate £80,
Head & HD1 tripod + elevator
Daily rate £90,
Skid
Daily rate £15,
For specifications, please see individual sections
(page 11 for Vector 950 and opposite page for
tripods)
Vinten Vector 700/750 kit
A Vector 700/750 head and heavy–duty tripod
(and skid) are available to hire as a kit. The
options are: head, HD1 tripod or HD2 tripod
or HD1 tripod with elevator. A skid can also
be added.
Head & HD1 or HD2 tripod
Daily rate £75,
Head & HD1 tripod + elevator
Daily rate £90,
Skid
Daily rate £15,
For specifications, please see individual sections
(page 10 for Vector 700/750 and opposite page
for tripods)
12
HD tripods & elevator
tripods & skids
HDT-1 & HDT-2
HDT-1 single-stage and HDT-2 twostage tripods are ideal for large camera
& lens combinations in studio & OB
applications.
Rates HDT-1 & HDT-2 – from 1st Jan 2012
Daily rate £30,
Specifications HDT-1 Tripod
Load Capacity:
Height Range:
Minimum Height:
Maximum Height:
Weight:
Transport Length:
140 kg (308.6 lbs)
64 cm (25.2'')
59 cm (23.2'')
123 cm (48.4'')
13.9 kg (30.6 lbs)
78 cm (30.7'')
Specifications HDT-2 Tripod
Load Capacity:
Height Range:
Minimum Height:
Maximum Height:
Weight:
Transport Length:
120 kg (264.5 lbs)
94.9 cm (37.4'')
51.1 cm (20.1'')
146 cm (57.5'')
15.6 kg (30.6 lbs)
73 cm (28.7'')
Elevator
For use with HDT-1 tripod. the elevation
unit gives a unit stroke of 46cm (18'') for
a quick height range adjustment.
Capacity range 113 kg (249 lbs).
Rates HDT-1 Elevator, including HDT-1
from 1st Jan 2012
Daily rate £45,
telephone +44 (0)20 8891 8910
13
Vector 430/Cine 30 HD
studio/OB heads
The new Vinten Vector 430’s unique design has
enabled Perfect Balance to be incorporated into a
compact and lightweight package with a wide
capacity range of 10 to 43 kg.
Ideal for a middle weight camera set up with a
large viewfinder and prompter, this head with TF
drag technology effectively replaces the Vision 30.
Equally at home on a studio pedestal or an OB
tripod, the Vector 430 is a versatile and welcome
addition to the TCS hire stock.
Specifications
Height:
20 cm (7.9”)
Length:
20 cm (7.9”)
Width:
28.5 cm (11.2“)
Weight:
12.1 kg (26.7 lbs)
Capacity Range:
10 to 43 kg (22 to 94.8 lbs)
Tilt Range:
±90°
Pan Bar:
Two telescopic
Camera Fixing: EFP Quickfit plate with 2 x 3/8” screws
Base fixing:
4 bolt flat with Quickfix groove or
150mm bowl mount
Colour:
Black
Rates – Vector 430 – from 1st Jan 2012
Daily rate £50,
Sachtler Cine 30 HD
TCS are delighted to introduce Sachtler products
into the rental stock. The Sachtler Cine 30 is a
compact and flexible middleweight head with a
payload range of 3 to 35 kg (7 to 77 lbs).
It offers 150 mm bowl mount or integrated flat
base 4 bolt fitting. Can also be supplied with EFP2
carbon fibre tripod and rolling base.
Specifications
Height:
22 cm (8.5”)
Length:
30 cm (12”) with camera plate
Width:
17.5 cm (7“)
Weight:
6.3 kg (14 lbs)
Capacity Range:
3 to 35 kg (7 to 77 lbs)
Tilt Range:
±90° to -75°
Pan Bar:
Two telescopic
Camera Fixing:Sidemount Snap & Go with 2 3/8” screws
Base fixing: 150 mm bowl or 4 bolt and Quickfix groove
Colour:
Black
14
Rates – Cine 30 HD – from 1st Jan 2012
Daily rate £45,
Rates – Sachtler Cine 30 HD Kit
Daily rate £55,
Vision 250/250 kit
visionheads&tripods
With a choice of easily changeable 150mm bowl or
flat bases, the Vinten Vision 250 can be mounted
on any pedestal or tripod, making the Vision 250
head one of the most versatile products in the range.
The TF drag system offers infinite adjustment
and because it works independently of the balance
system, allows precision balancing of the pan
and tilt axis so that the effort needed to follow the
action becomes totally insignificant.
Rates – Vision 250, head only – from 1st
Jan 2012
Daily rate £45,
Rates – Vision 250 Kit
Daily rate £55,
Specifications
Height:
Length:
Width:
Weight:
Capacity Range:
Tilt Range:
Pan Bar:
Camera Fixing:
Levelling Bubble:
Drag Knobs:
Counterbalance:
Colour:
18.4 cm (7.2”)
15.9 cm (6.3”)
24.4 cm (9.6“)
6.1 kg (13.5 lbs)
10 to 33 kg (22 to 72.8 lbs)
±90°
Two telescopic
Removable sliding plate with
2 x 3/8“camera fixing screws
Illuminated
Backlit and calibrated
Fully variable/digital readout
Black
Vision 250 Dutch Head
Full specification upon request
Rates – 250 Dutch Head – from 1st
January 2012
Daily rate £60,
telephone +44 (0)20 8891 8910
15
Vision 100/100 kit
visionheads&tripods
The Vinten Vision 100 is perfect for all
professional ENG or EFP situations that demand
total reliability and control excellence.
Combining Perfect Balance with the innovative
TF drag system, the Vision 100 allows total
control and consistent performance in the
toughest conditions. Following the action is
effortless even at the heaviest drag setting and
regardless of the environment. The Vision 100
also includes illuminated drag controls and a
digital counterbalance readout, ensuring
simple and repeatable camera set–up in any
lighting situation.
Rates – Vision 100 Kit – from 1st
January 2012
Daily rate £50,
Specifications
Height:
Length:
Width:
Weight:
Capacity Range:
Tilt Range:
Ball Base:
Pan Bar:
Camera Fixing:
Levelling Bubble:
Drag Knobs:
Counterbalance:
Colour:
16
15 cm(5.9”)
14.8 cm (5.8”)
17.2 cm (6.8“)
3.2 kg (7.1 lbs)
7 to 20 kg (15.4 to 44.1 lbs)
±90°
100mm
Single telescopic
Two–way sliding plate with
2 x 3/8“ camera fixing screws
Illuminated
Backlit and calibrated
Fully variable with digital readout
Black or grey
Tripods - EFP/ENG
tripods
Vision EFP/ENG tripods
Vinten Vision EFP/ENG tripods available in single
and two stage variations as well as baby legs.
Specifications – ENG 100mm bowl (shown left)
Maximum Height with Spreader
Minimum Height with Spreader:
Load Capacity:
Weight:
Transport Length:
156.2 cm (61.5'')
44.6 cm (16.4'')
25 kg (55 lbs)
2.6 kg (5.7 lbs)
71 cm (28”)
Specifications – EFP 150mm bowl (shown right)
Maximum Height with Spreader:
Minimum Height with Spreader:
Load Capacity:
Weight:
Transport Length:
157.1 cm (61.9'')
52 cm (20.5'')
45 kg (99 lbs)
5.5 kg (12.1 lbs)
76 cm (29.9”)
Specifications – ENG Baby 100mm bowl (shown left)
Maximum Height:
Minimum Height:
Load Capacity:
Transport Weight:
52.5 cm (21'')
26 cm (10.5'')
20 kg (44 lbs)
2 kg (4.4 lbs)
Rates* – ENG 100mm
Daily rate £25,
Weekly rate
(4-7 days) £100
Rates* – EFP 150mm
Daily rate £30,
Weekly rate
(4-7 days) £120
Specifications – EFP Baby 150mm bowl (shown right)
Maximum Height:
Minimum Height:
Load Capacity:
Transport Weight:
52.5 cm (21'')
26 cm (10.5'')
45 kg (100 lbs)
3.5 kg (7.7 lbs)
Rates – Baby Legs – from 1st Jan 2012
Daily rate £25,
Sachtler Cine 150 long
& medium
Extremely robust and stable for loads up to 140kg.
Specifications – Cine 150 long
Maximum Height:
Minimum Height:
Load Capacity:
Weight:
Transport Length:
176 cm (69.3'')
85 cm (33.5'')
140 kg (309 lbs)
10.7 kg (23.6 lbs)
103 cm (40.6”)
Specifications – Cine 150 medium
Maximum Height:
Minimum Height:
Load Capacity:
Weight:
Transport Length:
88 cm (34.6'')
20 cm (7.9'')
140 kg (309 lbs)
8.4 kg (18.5 lbs)
60 cm (23.6”)
telephone +44 (0)20 8891 8910
Rates* – Cine 150
Daily rate £35,
* Rates in effect from 1st January 2012
17
ENG/EFP/HD skids
skids
These lightweight and compact ENG and EFP
folding skids are available in both Studio and OB
versions. Both have fast action foot operated
brakes, and additionally the ENG studio skid is
fitted with track locks.
Rates for all skids – from 1st Jan 2012
Daily rate £15,
Specifications – EFP (Studio)
Leg Radius:
Castor Diameter:
Skid Weight:
Cable Guards:
Track Locks:
Specifications – EFP (OB)
Leg Radius:
Castor Diameter:
Skid Weight:
Cable Guards:
Track Locks:
525 mm (20.6'')
125 mm (5'')
9.2 kg (20.2 lbs)
NO
NO
525 mm (20.6'')
125 mm (5'')
7.8 kg (17 lbs)
NO
NO
Specifications – ENG (Studio)
Leg Radius:
Castor Diameter:
Skid Weight:
Cable Guards:
Track Locks:
500 mm (19.7'')
100 mm (4'')
6 kg (13 lbs)
YES
YES
Sachtler DV 100
Specifications
Load Capacity:
Weight:
Height:
Leg Radius:
60 kg (132 lbs)
5.15 kg (11.4 lbs)
15.5 cm (6.1'')
49 cm (19.3'')
HD Skid
Specifications
Wheel Diameter:
Load Capacity:
Weight:
Height:
Folded Size
Leg Radius:
18
15 cm (6'')
160 kg (352 lbs)
9 kg (20 lbs)
21 cm (8'')
29 x 78 x 24 cm (11'' x 31'' x 9.5'')
50 cm (20'')
Bazooka Mount
mountings
Bazooka systems come with a heavy base with
adjustable feet and 5 sections which fit together
and then clamp tightly to provide a very stable
and compact mount. The system is supplied in
two flight cases.
Rates
Daily rate £60,
Specifications
The maximum height with 5x sections added to base is:
32cm (52”)
150mm Ronford off–set bowl
adapter
150mm Ronford worldcup
bowl adapter
Rates – from 1st Jan 2012
Daily rate £18,
Weekly rate
(4-7 days) £72
Rates – from 1st Jan 2012
Daily rate £18,
Weekly rate
(4-7 days) £72
Camseat 360
A lightweight seat assembly for sporting events
where a low level camera position is required.
360° Camseat shown with
one of the two ‘bumpers’
we supply.
Daily rate £95,
Specifications
Maximum height of head plate:
Minimum diameter:
Minimum diameter (legs ext]:
Weight:
Load capacity:
30 cm (11.75”)
81.5 cm (32.5'')
135 cm (53'')
50 kg (110 lbs)
300 kg (660 lbs)
telephone +44 (0)20 8891 8910
19
Penguin Dolly
Vinten Classics
Penguin Dolly
The Penguin Tracking Kit comes complete with
column and seat assembly plus tiller arm for easy
operation. The tracking base wheels incorporate a
positive brake system with the self-aligning track
release and lock facility allowing use on straight,
or curved track.
Daily rate £180,
Specifications
Height: (ground to platform)
Diameter of Platform:
Width:
Ground Clearance:
Load Capacity:
30.5 cm (12'')
91.4 cm (36.5'')
Min 47 cm (19'')
3.75 cm (1.5'')
227 kg (500 lbs)
Examples of Max/Min Height achieved:
(to head mounting face)
Short Dolphin:
Max 165 cm (66'')
c/w Standard Column
Min Ground
Osprey Column:
Max 175 cm (70'') Min 76.3 cm (30.5'')
Vision 30/30 kit
The Vision 30 is capable of supporting up to 35 kg
/77.2 lbs and is suitable for a variety of ENG/EFP
camera combinations with EFP lens or teleprompter.
It is extremely robust, rigid and ideal for studio
/OB operations. The variable perfect camera
counterbalance system enables precision control of
tilt whilst the Vinten LF fluid drag system enables
smooth fluid movement when using larger lenses.
Can be supplied with a flat or 150mm bowl base.
Rates – Vision 30 – from 1st Jan 2012
Daily rate £40,
Rates – Vision 30 Kit – from 1st Jan 2012
Daily rate £50,
20
Specifications
Height:
18.5 cm (7.2'') (150 mm bowl fixing)
from platform to top of tripod face.
Height:
23 cm (9.1'') (flat base fixing) from
platform to bottom of flat base.
Length:
17.5 cm (6.9'')
Width:
24.5 cm (9.6'')
Weight:
10 kg (22 lbs)
Max. Load Capacity:
35 kg (77 lbs)
Dolphin Arms
Vinten Classics
These two classic jib arms come with counter
balance weights. Both arms work well with the
Osprey fixed column and tracking skid. Please
specify which head is being used so we
can supply the correct fitting.
Note: Hire rates apply to jib arms only, please
see page 8 for rates for Osprey base with fixed
column.
Daily rate £50,
Specifications – Short Dolphin Arm
Length:
Weight:
(excl. Balance Weights)
135 cm(54'')
30 kg (66 lbs)
Daily rate £50,
Specifications – Long Dolphin Arm
Length:
Weight:
(excl. Balance Weights)
193 cm(76'')
30 kg (77 lbs)
telephone +44 (0)20 8891 8910
21
Litepanels
lighting
22
Litepanels 1x1 Bi-Color
Litepanels 1x1 Bi-Focus
Variable Colour Temperature
Litepanels Bi-Color LED gives ultimate colour
control from tungsten to daylight in a compact,
lightweight, energy efficient package. Bi-Color
flood lets you adjust colour temperature instantly
so you can adapt to different shooting conditions
and skin tones as you go.
Bi-Color has a full range dimmer, remains cool
to the touch and can run on mains or Anton
Bauer Dionic 90 Batteries, producing a great, soft
wrapping light quality.
Variable Spot/Flood or Spot/Super-spot
The revolutionary Bi-Focus features two
complete sets of LEDs in a one foot square
slimline unit. With a simple turn of a dial, you
crossfade between the two sets to achieve
fully variable flood to spot, or spot to
super-spot output.
Like the Bi-Color, Bi-Focus offers fully
dimmable, energy efficient operation on mains
or battery power.
Daily rate £50, (batteries extra)
Daily rate £50, (batteries extra)
lighting
Litepanels 2x2, 4x4 formats
Litepanels MiniPlus
Modular Litepanels 1x1 can be combined to form
larger panels such as 2x1, 2x2 & 4x4, etc TCS's 4x4
comes with x16 standard 1x1
daylight spots.
MiniPlus is the original, compact, portable,
dimmable LED softlight. Available in daylight
flood and spot, this broad lighting source is ideal
to mount on camera, lighting stand, wall or
anywhere that calls for a highly portable softlight.
Fully dimmable and cool running on battery or
mains, this versatile light comes with a kit of pre
cut gels for tungsten conversion and diffusion.
Weight is only 10 ounces (0.36kg) and the unit
measures 7” width x 2.3” height x 1.2” deep
(173mm x 60mm x 30mm).
Daily rate £25, (single light kit)
Accessories (some shown opposite)
1x1 honeycombs or grids can be fitted into the
frame of the lamp. Anton Bauer rechargeable
batteries, Barn Doors and stands are also
available.
MiniPlus available as single or double kit.
telephone +44 (0)20 8891 8910
23
Accessories
accessories
24
QuickFix Adaptor
Quickfix Adaptor with 100
mm Bowl Base. For use
with a standard Vision
100 mm bowl tripod.
£10* per day
QuickFix Adaptor
Quickfix Adaptor with 150
mm Bowl Base. For use
with a Vision 150 mm
bowl tripod.
£10* per day
QuickFix Adaptor
Quickfix Levelling
Adaptor with fourbolt flat base. For use
with the Osprey and
Quattro pedestals
and HD tripod.
£15* per day
QuickFix Adaptor
Heavy Duty Quickfix
Adaptor with 4-bolt
base. For use with
the Osprey and
Quattro pedestals and
HD tripod. 100 kg max.
capacity. Quickfix ring to
fit 4-bolt flat base head.
£15* per day
100mm Levelling Adaptor
100 mm Levelling Bowl
Adaptor with Quickfix
ring and 4-bolt flat
base. For use with the
Osprey and Quattro
pedestals and HD
tripod.
£10* per day
150mm Levelling Adaptor
150 mm Levelling Bowl
Adaptor with Quickfix
ring and 4-bolt flat base.
For use with the Osprey and
Quattro pedestals and HD
tripod.
£15* per day
200mm Hi–Hat
200 mm Hi-Hat, 4-bolt flat
base to 4-bolt flat base. For
use with the Osprey and
Quattro pedestals and HD
tripod. Available in black or
grey.
£15* per day
Portable Pump
Portable Pump. For use with the
Osprey and Quattro
pedestals.
£15* per day
accessories
Scaffold Clamp
Scaffold Clamp with 4-bolt fixing.
For mounting directly onto OB
scaffolding.
£15* per day
Euro Boss
Euro Boss to Vinten Flat Base.
£10* per day
Skid Adaptor
Vinten 4-bolt fixing adaptor
to fit skids.
£10* per day
Script Card Holder
Script holder includes
lamp.
£15* per day
Ronford Off–set Bowl
With boss fitting for
Bazooka Mount.
£15* per day
Ronford World Cup Bowl
With boss fitting for
Bazooka Mount.
£15* per day
V250 Sidemount Viewfinder Bracket
Dowling Design viewfinder bracket.
£15* per day
Sidemount Viewfinder bracket
Dowling Design viewfinder bracket.
£10* per day
telephone +44 (0)20 8891 8910
25
Accessories/OConnor
accessories
Slung Mount
Supplied with clamp to
attach to scaffold bar. The
Slung Mount provides a
locked off shot with pan
and tilt adjustment using
a lighting pole.
£30* per day
4 Way Leveller
Also available Ronford 3
way Leveller.
£25* per day
Gas Bottle
Includes regulator, hose and
trolley. Only hired with
Quattro pedestals. (To be
used by a competent person
only) £35* per day
Horizontal Scaffold
Mount Adapter
Clamps onto single
horizontal scaffold
pole. Standard 4 bolt
fixing.
£10* per day
OConnor CFF-1 (Cine Follow Focus One)
Engineered to fulfill the needs of today’s
high-end cinematography TCS can
supply the CFF-1 (CINE FOLLOW FOCUS
ONE), O-Grips Handgrip System and the
O-Box WM from OConnor with its
integrated O-Grip mounting points.
Please call for details.
OConnor O-Grips Handgrip System
OConnor O-Box Mattebox
For rates and more information on OConnor products please call
26
maintenance
Workshop and
Maintenance Bay
TCS equipment is
maintained to the
highest standards by
experienced engineers.
telephone +44 (0)20 8891 8910
27
TCS location
location
Delivery and collection available throughout the
UK (Rates on request). Our vans are fitted with
tail-lifts for the safe movement of pedestals.
The equipment is available for collection from
our base in South West London. Our office hours
are 08.00 – 18.00 Monday to Friday.
We suggest that clients who are collecting
pedestals arrange that a vehicle fitted with a
tail-lift is used, as we do not recommend lifting
heavy equipment onto vehicles.
The Camera Store
t: +44 (0)20 8891 8910
m: +44 (0)7774 264939
28
Terms
terms
1. These are the terms on which The Camera Store hires
equipment. No variation to these terms is permitted, nor
shall terms and conditions used by the Hirer have any effect,
unless a director of The Camera Store agrees to that
variation, in writing. These terms apply to all hire
agreements.
2. All quotations shall, unless withdrawn, remain open for
acceptance by the Hirer for the period of three months
commencing from the date of the Quotation. Quotations
may be withdrawn by The Camera Store in writing to the
Hirer at any time before the receipt of an acceptance of the
quotation by the Hirer. Quotations do not include Value
Added Tax, which the Hirer must also pay at the prevailing
rate.
3. Hire charges are based on a ‘time out’ and not a ‘time
used’ basis with the minimum hire charge being £30. The
Hirer shall also pay for any additional equipment and/or
services not quoted for. Delivery and collection, if arranged
by The Camera Store, is extra.
4. The Hirer must take good care of equipment and return
it on the agreed date.
5. The Camera Store believes that all equipment it hires
will be undamaged and free from defects at the start of the
hire period. If the Hirer believes that equipment is damaged
or defective it must notify The Camera Store immediately. If
it fails to do so any damage or defects that are apparent on
return shall be deemed to have been caused by the Hirer.
6. If any equipment is damaged or defective when
returned to The Camera Store (and the Hirer did not notify
that damage as required by clause 4) the Hirer must pay for
the cost of repairs to that equipment (or if The Camera Store
believes the equipment is beyond repair, the cost of
replacement) plus an amount equivalent to the hire charge
for the period of the repair/ period pending replacement.
7. If the Hirer fails to return the equipment on the agreed
date a 100% surcharge for the overdue period will be paid by
the Hirer and if the equipment is not returned within 21 days
of the agreed date The Camera Store may treat the
equipment as lost in which case the Hirer must also pay the
cost to The Camera Store of replacing that equipment.
8. The Hirer must also indemnify The Camera Store
against all losses, costs, claims, expenses, damages,
demands and/or any liabilities which The Camera Store may
suffer by reason of the use of the equipment by the Hirer (or
any third party authorised by the Hirer) including, for
telephone +44 (0)20 8891 8910
example any infringement of copyright, performing right or
other similar analogous right.
9. Hirers with an agreed credit account with The Camera
Store must settle all invoices within 30 days from the invoice
date. New credit authorisation requires at least 4 days.
Hirers without a current credit authorisation may be
required to pay in advance. If payments are not made when
due the Hirer must also pay interest thereon at a daily rate
equivalent to 8% p.a. and pay an administration charge
levied by The Camera Store to cover its costs of pursuing
payment.
10. The Camera Store’s entire liability for any total or partial
failure, or unsuitability, of the equipment shall (subject to
clause 11) be limited to refund / waiver of hire fees for the
period of the hire during which the equipment failed. Under
no circumstances is The Camera Store liable for any other
losses (including, without limitation, production time lost,
costs wasted or the like) incurred as a result. The Camera
Store is not liable for any consequential expense, liability,
loss, claim or proceeding whatsoever.
11. The Camera Store accepts liability for death or personal
injury to any persons resulting from its negligence;
12. If the Hirer cancels a hire (or returns equipment before
the due date) it shall be liable for cancellation fees as
follows:
i. Within 24 hours of call time – 50% of full charge
ii. On arrival – 100% of full charge (including
transportation)
13. Should any term in this contract be held to be invalid
such invalidation will not affect the validation of the
remaining terms.
14. The Camera Store retains the right to terminate the hire
and recover the equipment at the Hirer’s cost if these terms
are broken. The Company will not be held liable for any
resulting costs or losses.
15. All equipment hired remains the property of The
Camera Store at all times.
The Camera Store is a trading name of Autoscript Limited,
Unit 2, Heathlands Close, Twickenham TW1 4BP.
©2011 The Vitec Group plc
Vinten, Vision, Vector, Quickfix and Quickfit are registered
®trademarks
of The Vitec Group plc
29
The Camera Store
t: +44 (0)20 8891 8910
m: +44 (0)7774 264939

The Camera Store Catalogue 2011

Transcription

Similar documents

Softub T-220 - Softub of the Carolinas

K9 SUPERFUEL TM Human Grade Ingredients

Softub T-140 - Softub of the Carolinas

VFX-9/13 Pneumatic Combination Tool for Polypropylene

SHRINKFAST.

SC-2300 spec

COBRACAM PRO

recycling done right - Vancouver

PermaScreen 70 | Tennis Windscreens

Fokker DRI Tri-plane - Airdrome Aeroplanes