04 Off Road cat Pgs 02-07

INTRO AND TABLE OF CONTENTS
TO OUR VALUED CUSTOMERS…
Welcome to the 2006-07 Edelbrock/Russell Off-Road products catalog. In the
following pages, you’ll find a complete line of high-quality carburetors, brake
lines, rotors and more. Edelbrock carbs have a flat-slide design for more air
flow and feature an adjustable accelerator pump to enhance throttle
response and provide easy tuneability.
Russell Performance has been involved with performance brake applications
for over twenty-seven years. Russell offers a vast line of off-road motorcycle
and ATV brake lines. The high-quality line of Russell components will
continue to be used as a benchmark for the fluid transfer market.
The combined technologies of Russell Performance Products and the
Edelbrock Corporation will benefit you, our valuable customer, by providing
superior quality and performance for your motorcycle and ATV.
Enjoy your ride,
Vic Edelbrock, President and CEO
Edelbrock Corporation
Edelbrock Foundry Corporation
TABLE OF CONTENTS
EDELBROCK OFF-ROAD CARBS .......................................................................................... 3-7
CARBURETOR PARTS / MOTORCROSS BRAKE ROTORS ..........................................................8
OFF-ROAD MOTORCROSS BRAKE LINES .......................................................................... 9-12
SPORT ATV BRAKE LINES ......................................................................................................12
SPEED BLEEDERS / FUEL FILTERS ........................................................................................14
SPORTSWEAR ........................................................................................................................15
Registered Names and Trademarks
Edelbrock®, Russell®, Cycleflex™
EDELBROCK HEADQUARTERS
2700 California Street, Torrance, CA USA 90503
RUSSELL HEADQUARTERS
2301 Dominguez Way, Torrance, CA USA 90503
Phone: 310-781-2222 • Fax: 310-320-1187
Carb Only Toll Free Tech Line: 877-888-7504, ext. 2
8am-5pm PST, weekdays
Tech Line: 800-416-8628, 7am-5pm PST, weekdays
Office hours: 8am-5pm PST, weekdays
2
Technical information from: Chris Kastner,
Rick Rohauer, Carol Yohe, Frank Alioto
Proofreading: Vic Edelbrock, Jeff Thompson, Camee Edelbrock,
Eric Blakely, Rick Rohauer, Carol Yohe, Frank Alioto,
Chris Kastner, Chris Silva, Brian Craig, Dave Stinson
Photography: Tom Dufur, Jason Rayburn,
Adam Campbell Photography
Brochure #09196 (undrilled) #09186 (drilled)
© 2006 Edelbrock Corporation • Printed 8/06
Speed Bleeder is a registered trademark of Speed Bleeder Products Co.
Teflon® is a registered trademark of DuPont Corporation.
Kevlar is a registered trademark of E. I. du Pont de Nemours and Company.
OFF-ROAD CARBURETORS
FEATURES AND BENEFITS OF
EDELBROCK CARBURETORS
Slide
Edelbrock Performer Series carbs are designed for today’s high-performance four-stroke engines,
providing improved power and throttle response through out the rpm range. The accelerator pump allows
crisp throttle response and added external tuneability for applications that demand a broad powerband.
Every Performer Series Edelbrock ATV carb offers these outstanding features:
• ADJUSTABLE ACCELERATOR PUMP - Adjustable pump offers
Adjustment Tool attaches
here for off idle to 1/2
instant throttle response and easy starting capability
Airflow
Needle adjuster assembly
controls the needle’s
position. Each click
equals 1/4-turn.
• THROTTLE SHAFT BEARINGS - Sealed 440 stainless steel shaft
bearings allow for a lifetime of smooth throttle operation
• HARD ANODIZED FLAT SLIDE - Hard anodized aluminum slide
makes for wear resistance and exceptionally smooth rideability
Needle
Float
throttle adjustments
• EASILY ADJUSTABLE - Externally adjustable needle height for
easy low speed fuel calibration
Fuel entry
into carburetor
Anti-slosh
plate
Fuel cell
Fuel bowl
Change the needle for
1/2 to full throttle
adjustments. Each
Edelbrock carb comes
with two extra needles:
one for leaner setting
and one for richer setting.
• CARBURETOR BODIES - Electroless nickel plated finish for
durability and good looks
• COMPLETE KITS - All Edelbrock Carb Kits include all necessary
hardware for installation and tuning plus high-quality Motion
Pro throttle cables
• WET-FLOW TESTED - Every Edelbrock motorcycle carb is
wet-flow tested before packaging for quality assurance
Air/Fuel
mixture
Slide
Cutaway
HONDA ATV
2004-05 TRX450R
This carb is calibrated for stock engines with
competition exhaust and modified or no air box lid.
The 40mm bore provides increased air flow and
significant power improvement over stock carb.
Bore: 40mm round
Thumb Kit #3198
Twist Kit #3199
2006 TRX450R
This carb is designed for use on both Electric
and kick start models with after market exhaust.
Increases low end torque without sacrificing
top end power.
Thumb Kit #3102
Twist Kit #3103
1999-06 TRX440 DOUG
EICHNER SIGNATURE SERIES
Designed for highly modified race engines (cam,
porting, higher compression piston, big bore) with
no air box lid and full competition exhaust system.
Bore: 38mm round
Thumb Kit #3027
Twist Kit #3156
Note: Carb calibration requires
minimum of 100 octane fuel.
1999-06 TRX400
Carb kit is designed for stock to mild
engines with competition exhaust.
Bore: 34x38mm oval
Thumb Kit #3004
Twist Kit #3105
Carb Only Toll Free Tech Line: 877-888-7504, ext. 2
3
OFF-ROAD CARBURETORS
1993-06 TRX300EX
Carb kit is designed for mildly modified
engines (cam, higher compression piston)
and competition exhaust.
Bore: 32x34mm oval
Thumb Kit #3007
Twist Kit #3106
HONDA MOTORCYCLES
1986-04 XR250R
Works well on stock engine with
snorkel removed from air box and
aftermarket slip-on muffler. Expect
larger power increases with cam
and high compression piston.
Bore: 30x32mm oval
Twist Kit #3116
1996-04 XR400R
Carb kit is calibrated for use with just
a simple slip-on muffler and snorkel
removed from top of air box. Also
works great with internal engine
mods up to 440cc.
Bore: 32x38mm oval
Twist Kit #3112
1988-00 XR600R
Works great with aftermarket
exhaust and open air box on
modified engines up to 628cc.
Bore: 36x40mm oval
Twist Kit #3113
4
Carb Only Toll Free Tech Line:
877-888-7504, ext. 2
OFF-ROAD CARBURETORS
2000-06 XR650R
Works great with stock exhaust with HRC tip
installed and opened up air box. Requires the use
of Honda Power-up manifold #16211-MBN-640.
Bore: 42x36mm oval
Twist Kit #3115
1995-06 XR650L
Carb kit increases power and torque
across the RPM range when used
with a performance muffler and filter.
Bore: 34x40mm oval
Twist Kit #3117
KAWASAKI ATV
2003-06 KFX400
Carb kit replaces the finicky CV carb to
create more power and rock solid fuel
metering no matter how rough the terrain
gets. Works great on stock and modified
engines up to 450cc.
Bore: 34x38mm oval
Thumb Kit #3157
Twist Kit #3158
KAWASAKI MOTORCYCLES
2003-06 KLX400
Works best with aftermarket exhaust and
modified air box. Street model requires the
use of Suzuki #13111-29F00 (intake) and
#09402-58208 (clamp). Dirt model
requires Suzuki #13881-29FB0 (boot)
and 09402-64203 (clamp).
Bore: 40mm round
Twist Kit #3118
See notes on page 7
Carb Only Toll Free Tech Line:
877-888-7504, ext. 2
5
OFF-ROAD CARBURETORS
POLARIS ATV
2003-06 PREDATOR 500
Works best with modified air box and
performance exhaust. Expect
consistent fuel delivery with
Edelbrock carb kits that the stock
CV cannot handle in rough conditions.
Bore: 36x40mm oval
Thumb Kit #3196
Twist Kit #3197
Note: Requires Suzuki #57100-07G00 (throttle housing).
SUZUKI ATV
2003-06 LTZ400
Carb kit replaces the finicky CV carb to
create more power and rock solid fuel
metering no matter how rough the terrain
gets. Works great on stock and modified
motors up to 450cc.
Bore: 34x38mm oval
Thumb Kit #3157
Twist Kit #3158
SUZUKI MOTORCYCLES
2000-06 DRZ400E/S
Works best with aftermarket exhaust and
modified air box. S model requires the use of
Suzuki 13111-29F00 (intake) and #09402-58208
(clamp). E model requires Suzuki #13881-29FB0
(boot) and 09402-64203 (clamp).
Bore: 40mm round
Twist Kit #3118
YAMAHA ATV
2004-06 YFZ450
Carb is designed to be used with open air box
and aftermarket performance exhaust. Smooths
out power band while maintaining low end
throttle response and increasing horsepower.
Bore: 40mm round
Thumb Kit #3177
Twist Kit #3178
6
Carb Only Toll Free Tech Line:
877-888-7504, ext. 2
OFF-ROAD CARBURETORS
2001-05 RAPTOR
This kit is a single carb conversion that replaces
the finicky dual CV carbs. No more removing the
carb for jetting. Works best with performance
exhaust and open air box. Aluminum plenum
attaches to stock air box. Includes new manifold.
Bore: 36x42mm oval
Thumb Kit #3026
Twist Kit #3154
2005-06 RAPTOR 350
2004-06 RHINO 660
Raptor 350
24
22
20
18
Max
Max
POWER
24.8 hp
Edelbrock Carb
Stock Carb
16
5500 6000 6500 7000 7500 8000
RPM
Designed to work on a stock or slightly modified
Yamaha Rhino 660, this Edelbrock Performer
Series carb increases hp and torque without
sacrificing rideability. This complete kit comes
with everything needed for a direct bolt-on.
Bore: 40mm oval
40
HORSEPOWER
Thumb Kit #3108
Twist Kit #3109
26
HORSEPOWER
Designed to work on a stock or slightly modified
Yamaha Raptor 350, this Edelbrock Performer
Series carb increases hp and torque without
sacrificing rideability. Available with thumb or
twist throttle operation.
Bore: 32x36mm oval
30
Rhino 660
Max
POWER
27.9 hp
20
10
0
1000
Edelbrock Carb
Stock Carb
1500
2000
RPM
2500
3000
Part No. #3119
1987-04 WARRIOR
The Warrior kit works best with
performance exhaust and open air box.
Kit includes new manifold that moves
carb closer to motor for increased hp
without sacrificing low end torque.
Bore: 32x36mm oval
Thumb Kit #3011
Twist Kit #3150
YAMAHA MOTORCYCLES
1998-06 YZ/WR400-450
Carb works great with stock exhaust
on YZ models. WR models work best
with performance exhaust and air
box snorkel removal.
Bore: 40mm round
Twist Kit #3148
NOTES:
- All carb kits are pre-jetted on stock motors with
open/modified air box, aftermarket exhaust, stock ignition,
and 91 octane fuel at 1500 ft. elevation unless specified.
- Thumb kits use stock throttle housing unless specified. Twist kits include push/pull cables which may fit into the
stock throttle housing. All ATV twist kits and some motorcycle kits will have a push/pull type throttle housing included.
7
CARBURETOR PARTS / BRAKE ROTORS
CARB NEEDLES
The larger the number on the needle, the richer the mixture.
E-SERIES NEEDLES
By having a longer, more gradual taper, the E-Series needles deliver
a progressively slower rate of fuel enrichment per slide opening.
K-SERIES NEEDLES
The K-Series needle, with a shorter grind length than the E-Series, creates
a progressively quicker rate of fuel enrichment per slide opening.
E-SERIES
K-SERIES
Size
Part #
1-E ...........#9001
2-E ...........#9002
3-E ...........#9003
4-E ...........#9004
5-E ...........#9005
6-E ...........#9006
7-E ...........#9007
8-E ...........#9008
9-E ...........#9009
10-E .........#9010
Size
Part #
11-E ...........#9011
12-E ...........#9012
13-E ...........#9013
14-E ...........#9014
15-E ...........#9015
16-E ...........#9016
17-E ...........#9017
18-E ...........#9018
19-E ...........#9019
20-E ...........#9020
Size
Part #
21-E............#9021
22-E............#9022
23-E............#9023
24-E............#9024
25-E............#9025
26-E............#9026
27-E............#9027
28-E............#9028
29-E............#9029
30-E............#9030
Size
Part #
1-K ...........#9031
2-K ...........#9032
3-K ...........#9033
4-K ...........#9034
5-K ...........#9035
6-K ...........#9036
7-K ...........#9037
8-K ...........#9038
9-K ...........#9039
10-K .........#9040
Size
Part #
11-K ...........#9041
12-K ...........#9042
13-K ...........#9043
14-K ...........#9044
15-K ...........#9045
16-K ...........#9046
17-K ...........#9047
18-K ...........#9048
19-K ...........#9049
20-K ...........#9050
Size
Part #
21-K............#9051
22-K............#9052
23-K............#9053
24-K............#9054
25-K............#9055
26-K............#9056
27-K............#9057
28-K............#9058
29-K............#9059
30-K............#9060
REPLACEMENT THROTTLE CABLES
These heavy-duty, Teflon® lined cables are durable and provide smooth throttle action.
Part # Carburetor Kit Number
Part # Carburetor Kit Number
#3013
#9331
#9332
#9333
#9337
#9339
#9345
#9348
#9354
#9355
#9351
#9352
#9347
#9340
#9353
3004, 3007, 3011, 3027
3112
3113
3117
3105, 3106, 3109, 3116, 3148, 3150, 3156
3026, 3102, 3108, 3177, 3198
3115
5" longer than #9339
3157
3103, 3118, 3154, 3158, 3178, 3199
3196
3197
Replacement Twist Throttle Housing
Replacement Remote Idle Cable
3119
Don’t get caught out
on the trail without extra
throttle cables!
RUSSELL OFF-ROAD BRAKE ROTORS
Russell off-road rotors are engineered utilizing our 10 years plus in rotor
manufacturing. Engineered to our precise tolerances from high quality
SUS420JZ stainless steel, our unique design and hole pattern enhances
heat dissipation delivering the optimum in brake performance.
Our rotors are compatible with most types of brake pads including
sintered material and Kevlar®, and utilize stock OEM mounting hardware.
HONDA
YEAR
MODEL
DESCRIPTION
PART #
95-00
95-05
04-05
02-05
2005
CR125, CR250R, CR500R
CR125R, CR250R
CRF250X, CRF250R
CRF450R
CRF450X
Front Disc Rotor
Front Disc Rotor
Front Disc Rotor
Front Disc Rotor
Front Disc Rotor
R47530
R47530
R47530
R47530
R47530
KAWASAKI
YEAR
MODEL
92-00
93-00
92-00
93-00
92-97
95-97
89-00
96-97
95-97
KX125, KX250
KX500
KX125, KX250
KX500
KX80
KX100
KX125, KX250, KX500
KX80
KX100
DESCRIPTION
PART #
Floating Front Disc Rotor
R47500
Front Disc Rotor
R47501
Front Disc Rotor
Rear Disc Rotor
R47502
R47510
Rear Disc Rotor
R47511
R47500
SUZUKI
8
YEAR
MODEL
DESCRIPTION
PART #
89-03
RM125, RM250
Front Disc Rotor
R47520
R47501
OFF-ROAD MOTORCYCLE BRAKE LINES
CYCLEFLEX OFF-ROAD, DUAL SPORT
AND MOTOCROSS BRAKE LINES
Russell’s Cycleflex Off-Road/Dual-Sport/Motocross brake lines are engineered to deliver optimum
performance and reliability. Cycleflex lines feature our PowerFlex Hose Series that utilizes a Teflon®
inner liner supported by a rugged 308 stainless steel outer jacket. This combination ensures a
lightweight assembly that withstands prolonged flexing, aging and vibration without expansion,
delivering enhanced brake performance. A section of hard tube prevents the line from fouling the
wheel or fender during suspension travel. Our precision double crimp technology ensures permanent
end attachment with precise alignment for ease of installation and an uncompromised fit.
Dwight Rudder gets air on his Honda XR440
Russell Cycleflex brake lines feature a hard
plastic tube to protect your wheel and fender
HONDA
CC
YEAR
MODEL
FRONT-REAR LINES
SPEED BLEEDER
80/85
1999-2004
CR80/85R
R09341-TBD
R40527
80/85
1999-2004
CR80/85RB EXPERT
R09341-R09587
R40527
125
1987-91
CR125
R09289-R09526
R40527
125
1992-94
CR125
R09359-R09526
R40527
125
1995-01
CR125
R09367-R09555
R40527
125
2002-03
CR125
R09343-R09583
R40527
125
2004-05
CR125
R09345-R09583
R40527
230
2003-05
CRF230F
R09592-N/A
R40527
250
1987-91
CR250
R09289-N/A
R40527
250
1992-94
CR250
R09359-R09526
R40527
250
1995-01
CR250
R09367-R09555
R40527
250
2002-03
CR250
R09347-R09583
R40527
250
2004
CR250
R09345-R09583
R40527
250
2004-05
CRF250R
R09345-R09583
R40527
250
2004-06
CRF250X
R09363-R09583
R40527
250
1996-04
XR250R
R09347-R09583
R40527
400
1996-04
XR400R
R09373-R09557
R40527
450
2002-06
CRF450R
R09345-R09585
R40527
450
2005
CRF450X
R09363-R09585
R40527
500
1987-91
CR500
R09289-N/A
R40527
500
1992-94
CR500
R09359-N/A
R40527
500
1995-98
CR500
R09367-N/A
R40527
650
1993-05
XR650L / XR650C
R09389-R09563
R40527
9
OFF-ROAD MOTORCYCLE BRAKE LINES
KAWASAKI
10
CC
65
YEAR
2001
MODEL
KX65
FRONT-REAR LINES
R08348-R08582
SPEED BLEEDER
R40528
65
2002-06
KX65
R08349-N/A
R40528
80
1998-00
KX80
R08326-N/A
R40528
85
2001-02
KX85
R08326-R08584
R40528
85
2003-06
KX85
R08326-TBD
R40528
100
1998-06
KX100
R08326-TBD
R40528
125
1990-93
KX125
R08286-R08554
R40528
125
1994-95
KX125
R08302-R08554
R40528
125
1996
KX125
R08303-R08554
R40528
125
1999-02
KX125
R08351-R08585
R40528
125
2003
KX125
R08351-TBD
R40528
125
2005
KX125
R08434-TBD
R40528
200
1993-03
KDX200
R08312-R08553
R40528
200
2004-06
KDX200
R08312-TBD
R40528
200
1997-03
KDX220R
R08312-R08553
R40528
200
2004-05
KDX220R
R08312-TBD
R40528
250
1993-96
KLX250R KLX300R
R08313-R08555
R40528
250
1990-93
KX250
R08286-R08554
R40528
250
1994-95
KX250
R08302-R08554
R40528
250
1996
KX250
R08303-R08554
R40528
250
1999-02
KX250
R08351-R08589
R40528
250
2003
KX250
R08351-TBD
R40528
250
2005-06
KX250
R08434-R08362
R40528
250
2004
KX250F
TBD-R08435
R40528
250
2005
KX250F
R08434-R08435
R40528
500
1990-93
KX500
R08286-R08554
R40528
500
1994-95
KX500
R08302-R08554
R40528
500
1996-02
KX500
R08303-R08554
R40528
500
2003-04
KX500
R08303-TBD
R40528
650
1993-06
KLR650
R08316-R08563
R40528
Go to page 12 for Russell ATV brake lines…
another great product with the same high
quality features as the motorcross line!
OFF-ROAD MOTORCYCLE BRAKE LINES
SUZUKI
CC
125
YEAR
1996-97
MODEL
DR125SE
FRONT-REAR LINES
R09132-N/A
SPEED BLEEDER
R40527
125
1990-95
RM125
R09131-R09137
R40527
125
1996-98
RM125
R09128-R09145
R40527
125
1999-02
RM125
R08422-R09145
R40527
125
2003
RM125
R08422-R08460
R40527
125
2004
RM125
R08434-TBD
R40527
125
2005
RM125
R08434-R08435
R40527
200
1996-05
DR200SE
R09132-N/A
R40527
250
1991-95
RM250
R09131-R09137
R40527
250
1996-98
RM250
R09128-R09145
R40527
250
1999-03
RM250
R08422-R08460
R40527
250
2004
RM250
R08434-R08460
R40527
250
2005
RM250
R08434-R08435
R40527
250
1992-98
RMX250
R09129-R09137
R40527
250
2004
RMZ250
TBD-R08435
R40527
250
2005
RMZ250
R08434-R08435
R40527
350
1990-99
DR350 / DR350SE
R09134-R09140
R40527
400
2000-05
DRZ400 / 400E / 400S
R08426-R08462
R40527
450
2005
RM-Z450
R08434-R08435
R40527
650
1996-05
DR650SE
R09193-R09095
R40527
Some recent off road/dual
sport bikes use a male
threaded hose end to
connect the front brake
line to the master cylinder. The Cycleflex brake line
kits for these bikes replace this male fitting with a
90° banjo in order to route the brakeline closer to
the handlebar, where it is better protected from
damage. The correct banjo bolt and sealing
washers are included with these kits.
11
OFF-ROAD MOTORCYCLE BRAKE LINES
YAMAHA
CC
YEAR
MODEL
80
125
125
125
125
125
125
125
125
125
225
250
250
250
250
250
250
250
250
250
250
250
400/426
400/426
400/426
400/426
400/426
450
450
450
1991-96
1992-93
1994-95
1996-97
1998
1999-00
2001-04
2005
2006
2000-06
1992-96
1994-97
2001-02
2005-06
1992-93
1994-95
1996-97
1998
1999-00
2001-04
2005
2006
1998
1999-2000
2001-02
1999-00
2001-02
2005-06
2003-04
2005
YZ80
YZ125
YZ125
YZ125
YZ125
YZ125
YZ125
YZ125
YZ125
TTR125L
XT225 SEROW
WR250
WR250F
WR250F
YZ250
YZ250
YZ250
YZ250
YZ250
YZ250/250F
YZ250/250F
YZ250/250F
YZ400F
YZ400/426F
YZ426F
WR400F
WR426F
WR450F
YZ450F
YZ450F
FRONT-REAR LINES
SPEED BLEEDER
R09775-N/A
R09762-N/A
R09772-R09880
R09776-R09880
R09794-R09891
R09813-R09838
R09813-R09839
R09823-R09824
TBD-R09824
R09822-N/A
R09773-N/A
R09772-R09880
R09817-R09839
R09825-R09824
R09762-N/A
R09772-R09880
R09776-R09880
R09794-R09891
R09813-R09891
R09813-R09839
R09823-R09824
TBD-R09824
R09794-R09890
R09813-R09891
R09813-R09839
R09820-R09891
R09820-R09839
R09825-R09824
R09813-R09839
R09823-R09824
R40528
R40528
R40528
R40528
R40528
R40528
R40528
R40527
R40528
R40528
R40528
R40528
R40528
R40527
R40528
R40528
R40528
R40528
R40528
R40528
R40527
R40527
R40528
R40528
R40528
R40528
R40528
R40527
R40527
R40527
ATV BRAKE LINES
Designed to meet the rigorous needs of ATV riders and racers, Russell Cycleflex ATV brake lines deliver
optimum performance and reliability. Cycleflex lines feature Russell’s PowerFlex Hose which uses a
Teflon® inner liner supported by a rugged 308 stainless steel outer jacket. This is a lightweight
combination that can withstand prolonged flexing and vibration without expanding, for better braking
performance. All lines are pre-assembled to the junction block for quick and easy installation. Our
precise double crimp technology ensures permanent end attachment with precise alignment for
uncompromised fit and an easy installation.
photo by Adam Campbell Photography
RUSSELL CYCLEFLEX ATV BRAKE
LINES PROTECT AND DELIVER
Doug Eichner, 2003-05 WORCS Pro Champion
ARCTIC CAT
CC
YEAR
MODEL
FRONT-REAR LINES
SPEED BLEEDER
400
400
2004-05
2004-05
DVX 400
DVX 400 (+3")
R09461-R09462
R09463-R09464
R40527
R40527
CC
YEAR
MODEL
FRONT-REAR LINES
SPEED BLEEDER
650
2000-02
DS650
R09480S-R09458S
N/A
BOMBARDIER
12
ATV BRAKE LINES
HONDA
CC
YEAR
MODEL
200
250
250
400
400
450
450
450
450
650
680
1988
2001-05
2006
1999-04
1999-04
2004-05
2004-05
2006
2006
2003-05
2006
TRX200SX
TRX250EX
TRX250EX
TRX400EX
TRX400EX (+3")
TRX450R
TRX450R (+3")
TRX450R
TRX450R (+3")
TRX650FA RINCON
TRX680FA RINCON
FRONT-REAR LINES
SPEED BLEEDER
R09308-N/A
R09346-N/A
R09391-N/A
R09309-R09317
R09319-N/A
R09364-R09366
R09377-R09378
R09395-R09396
R09397-R09398
R09393-R09394
TBD-R09394
R40527
R40527
R40527
R40527
R40527
R40527
R40527
R40527
R40527
R40527
TBD
KAWASAKI
CC
110
250
300
300
400
400
700
700
YEAR
1987
1987-02
1995-01
2002
2004-06
2004-06
2004-06
2004-06
MODEL
KLF110
KSF250 MOJAVE
KEF300 LAKOTA
KEF300 LAKOTA
KFX 400
KFX 400 (+3")
KFX V FORCE
KFX V FORCE (+3")
FRONT-REAR LINES
R09402-N/A
R09402-R08590
R09402-R08590
R09402-TBD
R09461-R09462
R09463-R09464
R09403-N/A
R09404-N/A
SPEED BLEEDER
R40528
R40528
R40528
R40528
R40527
R40527
R40528
R40528
SUZUKI
CC
YEAR
MODEL
250
400
400
1985-90
2003-06
2003-06
LT250R QUAD RACER
Z400 QUAD SPORT
Z400 QUAD SPORT (+3")
CC
350
350
350
350
350
350
350
450
450
450
660
660
660
660
700
700
YEAR
1987-90
1990-2006
1990-2006
1990-2006
1997-2004
1997-2004
2004-06
2004-06
2004-06
2004-06
2001-05
2001-05
2004-06
2004-06
2006
2006
MODEL
BANSHEE
BANSHEE (2 line kit)
BANSHEE (3 line kit)
BANSHEE (3 line kit, +3")
WARRIOR
WARRIOR (+3")
RAPTOR
YFZ450
RHINO
RHINO (+3")
RAPTOR
RAPTOR (+3")
RHINO
RHINO (+3")
RAPTOR 700R
RAPTOR 700R (+3")
FRONT-REAR LINES
SPEED BLEEDER
R09460-N/A
R09461-R09462
R09463-R09464
R40527
R40527
R40527
FRONT-REAR LINES
R09454-R09455
R09458-R09459
R09465-R09459
R09466-TBD
R09821-R09845
R09446S-TBD
R09445S-R09447S
R09442-R09444
R09430-R09432
R09431-N/A
R09440S-R09443S
R09441S-N/A
R09430-R09432
R09431-N/A
R09448-R09449
R09467-R09469
SPEED BLEEDER
R40528
R40528
R40528
R40528
R40528
R40528
R40527
R40527
R40527
R40527
R40528
R40528
R40527
R40527
R40527
R40527
YAMAHA
13
SPEED BLEEDERS/FUEL FILTERS
SPEED BLEEDERS ® TAKE THE
WORK OUT OF BRAKE BLEEDING
The Russell Speed Bleeder simplifies the troublesome job of bleeding your
brake system and makes bleeding your brakes a one person task. Replace
your original bleeder screw with our patented Speed Bleeder and you are
ready to start. All you do is open the Speed Bleeder 1/4 to 1/2 turn and
pump your brake lever continuously. Our patented check ball design allows
the old fluid and air to be pushed out, but closes between pumps,
preventing the old fluid or air from getting back into the system. When all
the old fluid is purged from the system, tighten the Speed Bleeder and
you’re done! Speed Bleeders are available for stock or aftermarket calipers.
PART #
QTY
SIZE
R40527
2
8mm x 1.25
R40528
2
7mm x 1.0
R40529
2
10mm x 1.0
R40530
2
10mm x 1.25
*Patented by U.S. Pat. #4869292, 4989639
After installing your new Cycleflex brake
lines, your brake system will have to be
bled, of course. Russell has a couple of
tips that will make this task much faster
and easier. First, we suggest that you prime your new lines
before installation. Using the proper brake fluid and an
eyedropper or small syringe, squirt brake fluid into one end of
the line until it comes out the other end. You do not have to
completely fill the line, as long as the inside of the Teflon® liner
is coated with fluid. Now install the line using new sealing
washers and torque the banjo bolts to factory specifications.
Another tip is to install Russell’s patented Speed Bleeder in
place of the original bleeder valve in the caliper. The Speed
Bleeder has a spring-loaded stainless steel check ball in it
that allows for one person brake bleeding. Simply crack the
Speed Bleeder open 1/4 to 1/2 turn and continuously pump the
brakes. Every time you pump, the check ball is pushed off its
seat, allowing the fluid and air out. Between pumps, the spring
closes the check ball, preventing any air from getting back
into the system.
Make sure you keep the master cylinder reservoir full, and when
all the air is bled out of the lines, tighten the Speed Bleeder
down and you’re done! Speed Bleeders are available in many
different sizes to fit motorcycles, cars, trucks, and virtually
anything else with hydraulic brakes or clutch. Following these
two tips can make bleeding your new Cycleflex lines much
less troublesome and time consuming.
ALUMINUM FUEL FILTERS
The Russell Billet Fuel Filter is a premium quality, high strength unit that is perfect for
motorcycle applications. Its alloy case is impervious to vibration, heat and shock. The
compact size makes it simple to install on almost any bike. The replaceable bronze filter
element removes tiny particles of dirt, rust and grit from the fuel that can cause clogging
and excessive wear.
14
PART #
COLOR
LENGTH
R45000
CHROME
1/4" LINE
R45010
RED
1/4" LINE
R45020
BLUE
1/4" LINE
R45030
BLACK
1/4" LINE
R45060
CHROME
5/16" LINE
R45070
RED
5/16" LINE
R45080
BLUE
5/16" LINE
R45090
BLACK
5/16" LINE
R51660
REPLACEABLE BRONZE FILTER ELEMENT (ALL)
SPORTSWEAR
ALSO
AVAILABLE
AS A WHITE
TANK TOP
RACING T-SHIRT
FLAMED TEE
100% cotton tee with an Edelbrock flame logo
on the front and back. $9.95 (add $3 for 2XL
and $4 for 3XL)
M - #91212
L - #91213
XL - #91214
2XL - #91215
3XL - #91216
100% cotton t-shirt with the racing logo on
the front and back. Get it in red or white or as
a white tank top. Tee - $9.95, Tank - 8.95
(add $3 for 2XL)
Red
White
White Tank
S - #2330
M - #2331
L - #2332
XL - #2333
2XL - #2334
S - #2365
M - #2366
L - #2367
XL - #2368
2XL - #2369
S - #2355
M - #2356
L - #2357
XL - #2358
2XL - #2359
HOODED SWEATSHIRT
A heavyweight, hooded sweatshirt with Edelbrock
screened on the front. Made from 100% cotton.
$22.95 (add $3 for 2XL)
M - #91202
XL - #91204
L - #91203
2XL - #91205
FREE DECALS #601910
These decal sheets have what it takes to decorate
any toolbox. Each sheet contains 7 die cut logos in
these sizes: (1) 4-1/2" decal, (2) 2" decals and (4)
1-1/2" decals. Printed on durable vinyl.
RETRO JACKET
This is a custom made jacket designed to
represent the retro “mechanic” jackets of
yesteryear. Screened with the vintage
Edelbrock Equipped logo on the back and a
pin-striped Edelbrock logo on the front. Made
from a high-quality cotton/poly blend and has
snap button cuffs. $57.95 (add $3 for 2XL)
M - #98702
L - #98703
RUSSELL BANNER #600290
Brilliant 8' X 2-1/4' Russell logo printed on reinforced all weather vinyl with brass grommets.
Recognizable from over a half mile away, this banner says that you carry the original advanced fluid
transfer system backed with the Russell name.
XL - #98704
2XL - #98705
BEANIES
Made from an acrylic/cotton
blend, these beanies have
a logo with silver flames
embroidered on the front.
Edelbrock - $11.95
Gray - #23247
Red - #23246
Russell - $10.95
RETRO CAP
Black cap with the same design as our
“Retro” Jacket. 100% Cotton light brushed
twill and sweat band with a Velcro back strap
and white inset visor. $7.95 - Order #23248
SIGNATURE SERIES CAP
Gray - #696810*
Black- #696811*
Red cap with Vic Edelbrock’s signature
on the side panel. $7.95 - Order #9804
*Available while supplies last.
RUSSELL CLASSIC BALL CAP
Order on line at www.edelbrock.com
or call 310-781-2222, 8am-5pm PST, weekdays
Classic brushed twill black baseball style cap
with embroidered Russell logo on the front.
$8.95 - Order #600240
15