linear actuators - Hanning Elektro

LINEAR ACTUATORS
Type SL 95 / SL 80 / KL 95
up to 12,000 N with high protection class (IP)
moving
As one of the leading manufacturers of electrical
and electronic drive components and systems we
offer you a wide product range for almost every
industrial application in many different branches of
industry.
Innovative products and our sound technical
competence have made us a reliable partner for
more than 50 years. We understand our customers’
problems and find individual solutions.
lift
position
Accessories and
safety from page
13 onwards
SL 95
linear actuator
2
Page 4
SL 80
linear actuator
Page 7
KL 95
linear actuator
Page 10
ideas
moving ideas – With this slogan we present
ourselves on the market. It represents our aim to
develop and produce modern and economic drive
solutions for our customers.
Our experience and orientation towards the future
provide the foundations for our ambitious strategies.
From our manufacturing sites in Germany as well as
our international sales offices we deliver HANNING
products and service to successful companies all
over the world.
move
control
universal
and powerful
Linear actuators for applications with
high protection class
The encapsulated linear actuators of the SL 95, SL 80 and KL 95 series
are mainly distinguished by their compact and rugged design, the stroke
lengths and traversing speeds individually adapted to an application
and their powerful and low-noise operation.
The actuators are suitable for operation in humid environments and
high-safety applications because of their encapsulated design in
protection class 2.
HANNING linear actuators are absolutely maintenance free and their
reliability is well established. They offer the highest operating safety
possible.
3
SL 95 linear actuators
Powerful and quick
The range of HANNING encapsulated linear actuators is headed by
the SL 95. It enables pressure and tension up to 12,000 N and
traversing speeds up to 42 mm/s or 50 mm/s which almost remain
constant even at rated load.
The SL 95 linear actuators are ideal drives for a powerful and safe
adjustment of therapy tables and many more medical and industrial
applications. The reliable and rugged linear actuators can be adapted
to the requirements regarding traversing speed and accuracy of
position. Different stroke lengths are possible. They can be individually
controlled by either the patented HANNING pneumatic control or
electrically.
As option, the linear actuators are also available with a declutch
system. The power transmission can be interrupted in one direction
so that the traversing in is only caused by the weight which is
loaded on the drive.
The declutching is achieved by a special bearing which ensures the
power transmission between worm and motor shaft.
The linear actuators of these series are also available as low-voltage
three-phase AC system with frequency inverter (DC-FI system).
Please ask for our DC-FI broschure.
SL 95 linear actuator
Features
Equipment at a glance
• Powerful single-phase AC motors, three-phase AC motors or
low-voltage three-phase drives (DC-FI)
• Almost constant traversing speed during load changing operation
• Windings adapted for the application with HANNING frequency
inverters
• Operation with ambient temperatures between -20 and +50 °C
• Individual stroke lengths adapted to the application
• Individual control possibilities
• End position switch-off through internal micro-switch
• Certified according to DIN EN 60601, UL 60601, CSA 60601
• HALL IC to detect a position at 1325 to 2650 pulses per minute at
rated motor speed
• High-efficiency plastic gear or antilock bronze gear
• Travel tube in nickel-plated St37 steel, V2A or aluminum
• Declutching function
• In low-voltage applications the SL 95 can be used as master for up
to three slave drives
4
Technical data for SL 95
SL 95
Mains voltage
1~ 100 / 115 / 230 V AC ± 10 %
3~ 400 V
Max. load
12,000 N (industrial application) or 10,000 N (medical application)
Stroke length
up to 500 mm, over 500 mm on request
Class of protection
1 or 2
Type of protection
IP00 to IP55
Duty time
25 s on / 400 s off
Control
• pneumatically
• electrically
• via HANNING universal control units
• via HANNING frequency inverters
• via low-voltage switching elements
End position limitation
• End position limitation through internal micro-switch
• Optionally the end positions can be externally limited by micro switches
Position detection
• Hall sensor
Safety options
• Declutching in downwards direction, special declutch bearing
• HANNING safety-lock-box
Force-speed diagram
100 / 115 / 230 V
single phase
50 / 60 Hz
kN
12
11
10
9
8
7
6
5
4
3
2
1
50 Hz
60 Hz
7 11 14
8 13 16
400 V
3-phase
28
42
33
63
50
75
mm/s
50 / 60 Hz
kN
12
11
10
9
8
7
6
5
4
3
2
1
50 Hz
60 Hz
14 17 21 25 28
33
42
50
63
75
mm/s
5
Dimension sheet for SL 95
SL 95
z = Overlapping depends on load and stroke length
H = Horizontal fork joint position, turned by 90°
V = Vertical fork joint position, as shown
6
SL 80 linear actuators
Universal and compact
The new SL 80 is very powerful and covers up to 8,000 N. Many new
applications are possible. Its newly developed housing with
integrated endshield ensures a very compact design. The SL 80 is
now also suitable for smaller mounting spaces. The very rugged
motors enable almost a load-constant speed up to 15 mm/s.
As option, the SL 80 is also available with a declutch system. The
power transmission can be interrupted in one direction so that the
traversing in is only caused by the weight which is loaded on the drive.
The declutching is achieved by interrupting the power transmission
between screw nut and travel tube.
HANNING’s engineering department offers the development and
implementation of individual solutions. Together with the customer
we define the drive requirements regarding power, traversing speed
and accuracy of position and adapt the drive accordingly.
The linear actuators of these series are also available as low-voltage
three-phase AC system with frequency inverter (DC-FI system).
Please ask for our DC-FI broschure.
SL 80 linear actuator
Features
Equipment at a glance
• Powerful single-phase AC motors or low-voltage three-phase drives
(DC-FI)
• Almost constant traversing speed during load changing operation
• Windings adapted for the application with HANNING frequency
inverters
• Compact design thanks to an endshield housing with integrated
worm gear
• Operation with ambient temperatures between -20 and +50 °C
• Individual stroke lengths adapted to the application
• Individual control possibilities
• End position switch-off through internal micro-switch
• Certified according to DIN EN 60601, UL 60601, CSA 60601
• HALL IC to detect a position at 1325 to 2650 pulses per minute at
rated motor speed
• High-efficiency plastic gear
• Aluminum travel tube
• Declutching function
• If controlled through low-voltage switching elements, the SL 80 can
be used as master for up to three slave drives
7
Technical data for SL 80
SL 80
Mains voltage
1~ 100 / 115 / 230 V AC ± 10 %
Stroke length
up to 300 mm, over 300 mm on request
Class of protection
1 or 2
Type of protection
IP00 to IP55
Duty time
25 s on / 400 s off
Control
• pneumatically
• electrically
• via standard PLC
• via HANNING universal control units
• via low-voltage switching elements
End position limitation
• End position limitation through internal micro-switch
• Optionally the end positions can be externally limited by micro switches
Position detection
• Hall sensor
Safety options
• Declutching in downwards direction, motor disengaged
• HANNING safety-lock-box
Force-speed diagram
SL 80 big version (EB 50) – 100 / 115 / 230 V
single-phase
50 / 60 Hz
50 Hz
kN
60 Hz
8
7
6
5
4
3
2
1
6
10
7
8
15
12
18
mm/s
Dimension sheet for SL 80
SL 80
H = Horizontal fork joint position, turned by 90°
V = Vertical fork joint position, as shown
Fork joint option
SL 80 dimension a
9
KL 95 linear actuators
Small and individual
The KL 95 is the smallest linear actuator of this series. Nevertheless
it is as rugged as all the other drives. It is suitable for applications up
to 4,000 N and traversing speeds of 18 mm/s.
Of course, the linear actuators can be adapted to your individual
application regarding power, traversing speed and accuracy
of position.
As option, the KL 95 is also available with a declutch system. The
power transmission can be interrupted in one direction so that the
traversing in is only caused by the weight which is loaded on the
drive.
The declutching is achieved by interrupting the power transmission
between screw nut and travel tube.
The linear actuators of these series are also available as low-voltage
three-phase AC system with frequency inverter (DC-FI system).
Please ask for our DC-FI broschure.
KL 95 linear actuator
Features
Equipment at a glance
• Powerful single-phase AC motors or low-voltage three-phase drives
(DC-FI)
• Almost constant traversing speed during load changing operation
• Operation with ambient temperatures between -20 and +50 °C
• Individual stroke lengths adapted to the application
• Individual control possibilities
• Mechanical end position switch-off
• Certified according to DIN EN 60601, UL 60601, CSA 60601
• HALL IC to detect a position at 1325 to 2650 pulses per minute at
rated motor speed
• High-efficiency plastic gear
• Declutching function
• Aluminum travel tube
• Low-voltage hand switch only with SL 80 / SL 95 masters
10
Technical data for KL 95
KL 95
Mains voltage
1~ 100 / 115 / 230 V AC ± 10 %
Stroke length
up to 300 mm, over 300 mm on request
Class of protection
1 or 2
Type of protection
IP00 to IP55
Duty time
25 s on / 400 s off
Control
• pneumatically
• electrically
• via standard PLC
• via HANNING universal control units
• low-voltage switching elements through SL 80 / SL 95 masters
End position limitation
• Mechanical end position limitation
• Optionally the end positions can be externally limited by micro switches
Position detection
• Hall sensor
Safety options
• Declutching in downwards direction, motor disengaged
• HANNING safety-lock-box
Force-speed diagrams
100 / 115 / 230 V
single-phase 50 / 60 Hz
kN
50 Hz
4
60 Hz
3
2
1
6
10
7
15
12
18
mm/s
11
Dimension sheet for KL 95
KL 95
H = Horizontal fork joint position, turned by 90°
V = Vertical fork joint position, as shown
Fork joint option
KL 95 dimension a
12
Accessories
To complete the drive system, HANNING offers an extensive range
of accessories including different control variants, hand and foot
switches.
A drive can either be controlled through a HANNING pneumatic hand
or foot switch or an electrical hand or foot switch in low-voltage
technology.
Furthermore it is possible to control a drive with an infra-red remote
control and the CTRL universal control unit. This system includes a
comfortable memory function which finds programmed positions
directly. The switch design and the control type can be selected as
desired.
Control units
HANNING offers various control units for linear actuator. You can
choose between the patented pneumatic hand and foot switches
and the low-voltage hand and foot switches.
Pneumatic control elements:
• Hand switch
• Foot switch
• Stop button (external limit switch)
Low-voltage control elements:
• Hand switch
• Foot switch
• Limit switch
• Infra-red remote control together with
HANNING universal control unit CTRL
13
Accessories
HANNING universal control unit CTRL
HANNING’s frameless universal control unit is suitable for applications
in very small mounting spaces and offers the user many control and
safety options. All HANNNG linear actuators can be equipped with
this type of control unit.
CTRL
Safety options
• Enable input
• Safety switch-off
Control
•
•
•
•
•
5 V DC
Analog keyboard
Infra-red interface RECS80
Coded signal cable RECS80
Bus interface (in preparation)
Error diagnostics
14
Motor control
Voltage supply
• 4 x 0.5 kW single phase
• Connection of up to four motors possible
• Connection of up to three motors and two
switching outputs possible
• Programming of up to eight memory positions
possible
• Last-position function
• Auto-correction / virtual limit switch
• Two different standard software solutions
• 100 / 115 / 230 V AC
Safety
Medical applications require a very high safety standard. HANNING
linear actuators are equipped with different active and passive safety
devices which ensure that they can be safely and perfectly integrated
into our customers’ applications.
In addition to the safety options directly integrated into the motor
as declutching functions, HANNING offers you a safety-lock-box.
Our safety devices ensure a very high safety standard for our
customers’ applications.
Our products are certified and approved by all common standards
and regulations to ensure trouble-free operation in medical
applications.
Active safety devices
Pneumatic stop-button
The pneumatic stop-button can be used as external limit switch
(at zero current).
Declutching system
As option, HANNING linear actuators are also available with
declutching, i.e. the power transmission can be interrupted in one
direction so that the traversing in, for instance, the ingoing
direction is only caused by the weight which is loaded on the drive.
The declutching is achieved by a special bearing which transmits the
power between worm and motor shaft or interrupts the power
transmission between screw nut and travel tube.
15
Safety
Passive safety devices
Safety-lock-box
The HANNING safety-lock-box meets all regulations of the BfArM
(German Institute for medical Products). It interrupts the power
supply of HANNING drives even before the motor so that improper
handling becomes impossible.
Pneumatic control
About 30 years ago HANNING patented this pneumatic control which
enables the control of linear actuators at zero current. The operator
does not have to touch any live components and its rugged design
ensures highest reliability.
Innovation
HANNING is presently developing an innovative drive system which
operates at variable speed and offers interesting performance
features.
The current consumption could be considerably reduced so that the
drive is absolutely suitable for constant operation even when being
used with batteries.
This low-voltage three-phase AC motor can be driven by a transformer
or a common lead-gel battery which makes it appropriate for mobile
applications.
HANNING’s brushless DC system is an alternative to a standard DC
drive and avoids all known disadvantages.
16
Fax enquiry:
+49 (5202) 707 303
Linear actuator questionnaire
Planned application:
Company address:
Voltage:
V
Hz
Pressure:
N
Tension:
N
Stroke length:
mm
Maximum static load:
N
Velocity:
mm/s
Duty time:
%
Ambient temperature:
between
Email:
Contact:
ºC
Class of protection: I = grounded II = double insulation
Type of protection:
Telephone:
x
Send an offer
%
Send a sample device
Give us a call
IP
Humidity:
Please
Weather conditions / chemicals:
Max. Dimensions / mounting depth:
mm
Visit us
Max. coasting
mm
Send information material about all HANNING products
Mounting position:
Standards:
UL CSA others:
Axial / lateral force:
Yes
⌧
No
Previous solution:
Requested amount per year:
Estimated price:
pieces
€ / piece
Type proposal:
17
Standard is not enough
service
HANNING’s engineering department offers the development and implementation of individual solutions.
Together with the customer we define the drive
requirements regarding power, traversing speed and
accuracy of position and adapt the drive accordingly.
Technical details such as phase adaptation to reduce
the noise generation are defined and integrated into
our customers’ individual solutions.
advise
check
The experience we have gained over more than five
decades have made us a reliable partner for our
customers.
HANNING products can be found in many different
branches of industry: drives for mechanical
engineering, blowers for food-processing machinery,
drain pumps for washing machines and dishwashers
as well as linear actuators for versatile applications.
HANNING’s philosophy is to develop and produce
modern and economic drive solutions in close
co-operation with our customers.
From analysis of the drive problem and finding a
custom-built solution to after-sales-service – you can
rely on us!
18
optimi
• Interdisciplinary development
(motor + electronics + software)
• Analysis of the drive problem
• Planning in close co-operation with our customer
• Application and customer-specific drive solutions,
individual mechanical solutions
• Cost-optimised drive concepts
• Customer-contact and co-operation over several
device generations
• After-sales-service
• High manufacturing depth
• Measuring laboratory, continuous test facilities
• State-of-the-art electronic manufacturing site
(SMD, hybrid technology)
• Handling and support with national and
international approvals and certifications
• Certified according to DIN EN ISO 9001:2000,
DIN EN ISO 14001:2005
• Extensive knowledge of different branches of
industry
& more
se
measure
support
19
HANNING ELEKTRO-WERKE GmbH & Co. KG
Holter Straße 90, D-33813 Oerlinghausen
Postfach 1361, D-33806 Oerlinghausen
Tel +49 (5202) 707-0 · Fax +49 (5202) 707-301
info@hanning-hew.com · www.hanning-hew.com
Printed in Germany · Subject to technical alterations · SL 95 / SL 80 / KL 95 /E/09.09/PDF