AL NOOR Solar-Pads

AL NOOR
Solar-Pads
AL NOOR
Solar Powered
Outdoor Lighting
Systems
Al NOOR Solar-Pads
EPCA introduces an alternative
way for efficient lighting control
• are the ideal solution for street and outdoor lighting due
to their long life, directional light, uniform brightness and
illumination.
• in a properly designed luminaire are dark sky friendly,
eliminating stray light and reducing overall light pollution.
• for outdoor lighting are environmentally friendly as they
contain no mercury.
A PIR-based (Passive InfraRed sensor) motion detector
reduces the light output in times of low traffic.
Compared to normal installations it saves up to 70% of
energy due to a solar charge controller for autonomous
lamp systems with brightness control.
This reduces the light pollution significally, as animals
and people need darkness to sleep, relax and regenerate.
• are efficient, autonomous LED street light systems,
which do not require any electrical connections.
• are working independently from any electricity grid
– there is no need to supply power cables to the
lamp posts at site.
Motion Sensor
• do have an integrated high-performance solar module.
The energy is stored into a maintenance free, weatherproof, corrosion and temperature resistant, leak-proof,
powerful battery set for long-lasting periods of bad
weather.
Integrated Design
Battery
LED Lamp
Heat Emission Holes
Solar Module
EPCA‘s AL NOOR Solar-Pads are
the intelligent solution for street
lighting – independently of any
infrastructure conditions
High energy efficiency:
AL NOOR Solar-Pads lighting systems
consume much less energy than sodium lamps,
because of the LED technology – savings of
about 40-50%. Due to the low power consumption
not only the environment, but also the budget of cities
and municipalities is spared.
Less light pollution:
The light of the AL NOOR system can be aligned, to avoid
unnecessary light pollution. This benefits not only the visibility
of the night sky, but also many animals as well as human
health.
Insects friendly:
The light from light-emitting diodes (LEDs) looks unattractive
to night active insects, they will be preserved from mass
deaths at a hot lightbulb – in addition, expensive lamp
cleaning is no longer required.
Long service life:
While the commonly used sodium lamps only have a lifetime of about 12.000 hours, the LED lighting system lasts
for 50.000 hours. It‘s nearly five times extended than most
conventional street lighting.
Self-contained supply:
Ideal street lighting or bus stops illumination without extensive and expensive electrical wiring. Rural areas can be easily
supplied with lighting, thanks to integrated solar modules and
battery units.
AL NOOR L30 / L40
AL NOOR L60
8m
Light distribution pattern
7m
6m
L30
L40 L60
~32 Lux ~38 Lux
~28 Lux ~33 Lux
~26,4 Lux
AL NOOR
LED Power
Color temperature
Light Distribution
Charge time*
Discharge time**
Working temp.
Mounting height
Space Post / Post
Weight
Solar-Pad L30
12V 30 W 6.500 k-7.000 k
120°
6 hours > 20 hours
-20~+60°C
6-7 m
20-25 m
18,5 kg
Solar-Pad L40
12V 40 W 6.500 k-7.000 k
120°
6 hours > 20 hours
-20~+60°C 6-7 m
20-25 m
19 kg
* (depending on Irradiance) **(saving mode)
Solar-Pad L60
12V 60 W
6.500 k-7.000 k
120°
6 hours
> 20 hours
-20~+60°C
7-8 m
25-30 m
22,5 kg
Designed
Developed and
Engineered in Germany
EPCA-Germany – the power of engineering.
Advanced technology combined with face to face relationship and an in-depth
understanding of customers needs – that’s what EPCA-Germany as a manufacturer of
Renewable Energy Systems, Thermal Cutting Machines and Automation Technology stands for.
Customers are companies active in Green Energy and Pure Water Supply,
Steel Construction, Shipbuilding, Vehicle Manufacturing, Fabrication
and other Heavy Metal Industries – they all trust on the EPCA-Germany expertise.
EPCA-Germany GmbH
Haagweg 34
61231 Bad Nauheim
Tel. +49 6032 93 86 232
www.epca-germany.com
info@epca-germany.com
Renewable Energy • Thermal Cutting • Engineering • Automation