Collators Stitchers - Standard Finishing Systems

Transcription

Options for Collators and Stitchers
Collators
Stitchers
Options
Various options are available to
handle wide range of applications.
ST-60
Tandem Stacker
Tandem Stacker
Connectable Collators
Air-Suction Collator VAC-1000 (20 bins)
VAC-1000, VAC-600H
VAC-100, VAC-60H
SAC-150
Paper Jogger for Right Side Delivery PJ-77R
Ƈ The twin-tray design delivers 8,000 sets per hour as neatly jogged off-set stacks. When one stack tray becomes
full, thesets automatically route to the other stack tray,
with no system slowdown.
Tandem Stacker ST-60
Ƈ Errored sets are delivered to the built-in reject tray for
non-stop operation.
Ƈ A continuously cycling tail jog keeps all sheets well positioned for superior stack quality.
Reject Tray
Tandem Pallet
Friction Collator SAC-150 (60 bins)
Tandem Stacker ST-60
ST-40
Bypass Stacker
VAC-1000, VAC-600H
VAC-100, VAC-60H
SAC-150
Bypass Stacker ST-40
Connectable Stitchers
SPF-200A, SPF-200L, SPF-20,
StitchLiner5500
Ƈ Connected between the collating and bookletmaking
systems, the ST-40 serves as a high-capacity offset
or straight stacking device.
Air-Suction Collator VAC-600H (12 bins)
Ƈ Errored sets are delivered to the built-in reject tray for
non-stop operation.
Ƈ A continuously cycling tail jog keeps all sheets well
positioned for superior stack quality.
Hole Punch Unit HP-200A
Fore-edge Trimmer FC-200A
Bookletmaker SPF-200A
Sub Accumulator SA-40
CCR / CCR-DX
ST-20 Stacker Receiving Tray
Criss-Cross
Receiving Tray
Ƈ The criss-cross receiving tray swings
90 degrees at each collating interval,
clearly separating collated sets to
simply post-collating processes. This
is also suitable for piling sets onto
previously collated sets.
ST-20R
Ƈ The stacker receiving tray shifts each
collated set laterally, separating the
collated sets. When an empty pallet
is presented, the stacker rises to its
home position to start collating.
Stacker Receiving Tray for Right Side Delivery
Ƈ The stacker receiving tray shifts each collated
set delivered on the right side laterally.
PJ-77R
PJ-77
Paper Jogger
Ƈ Driven by an independent motor, the
paper jogger vibrates collated sheets
into perfect alignment. The jogger
tray rises automatically by a foot
switch to start collating.
Paper Jogger for Right Side Delivery
Ƈ The paper jogger vibrates collated sheets delivered on the right side into perfect alignment.
SA-40 Sub Accumulator
VAC-1000, VAC-600H
VAC-100, VAC-60H
SAC-150
Connectable Stacker
Stitcher
ST-40
SA-40
Ƈ The SA-40 sub accumulator temporarily accumulates the
sheets delivered from the collator and stabilizes the sheet
jog for the stitcher for quality bookletmaking. Also the SA40 improves the sheet jog for the ST-40 bypass stacker.
Ƈ Using the accumulating mode on the SA-40, every misfed
sheets can be ejected.
ST-40
Sheet Flow from Collator to SA-40/ST-40
Ƈ Sheet delivery angle, bulging nose, assist air, stopper
plate, and jog waiting time are adjustable for running the
various type of paper.
Saddle-stitching System StitchLiner5500
Collator
Sub Accumulator SA-40
BC-20
Bypass Conveyor BC-20
Bypass Conveyor
VAC-1000, VAC-600H
VAC-100, VAC-60H
StitchLiner5500
Ƈ The BC-20 can be connected with
the collators, stitchers, and receiving
trays (CCR / CCR-DX) all together.
The BC-20 switches over from bookletmaking to stacking with simple
push of a button.
Connectable Receiving Tray
CCR / CCR-DX
Criss-Cross Receiving Tray CCR / CCR-DX
Ƈ The built-in rejecting tray is equipped
for non-stop collation.
Ƈ Sheet jam detection is provided. And
the LED shows the location of jam.
Ƈ The BC-20 is equipped with hand
feeding function as standard.
IC-VAC600H
Image Checking System
VAC-600H
Ƈ Running the memory function, the printed image of each
page is scanned and stored automatically.
Ƈ A scanning position can be changed on the touchscreen.
Ƈ The image checking system installed in each bin scans
all pages and checks paging disorder. The system can
detect differences in color.
Ƈ Horizon’s unique CMOS camera is housed in a transSRUWLQJVHFWLRQRIWKHFROODWRUIRUVSDFHHI¿FLHQF\
Ƈ Using the show-through reduction mode, the image
checking system can check thin sheets. The camera
does not see images on the back.
Image Storing
Determination mode, sensitivity, size, imaging timing, color
check mode, and show-through
reduction mode are setup with
each bin. A position to scan image is adjustable.
Paging Disorder Checking
The monitor shows six-level of
image matching result on each
page. When unmatching level
become level 5, the CCD-VAC
determines paging disorder and
collation stops.
The CMOS camera is
housed in a transporting
section of the collator for
VSDFHHI¿FLHQF\
Longer lasting high intesity
white LEDs are employed
for capturing image precisely.
CMOS camera
IM-30
Paper Inserter
Paper Inserter IM-30
SPF-200A, SPF-200L,
StitchLiner5500
Ƈ Sheet insertion can be performed in-line with the Stitcher with minimal operator involvement.
Ƈ Maximum production speed is 4,000 booklets per hour
with the StitchLiner or 3,600 booklets per hour with the
SPF-200A. Faulty set eject function is employed for
non-stop operation even when a feed error occurs.
Ƈ Intuitive touchscreen control and quality checking systems (Feed section error sensor, Separation error senVRU%RRNOHWMDPVHQVRULQFUHDVHSURGXFWLRQHI¿FLHQF\
with minimal errors.
Ƈ Increase production capabilities with a wide range of inserting applications.
Up to three sheets
Beneath Top Sheet
can be inserted into
Post Card
Hole Punched Sheet
the middle of a booklet or beneath the top
sheet Vacuum rotary
Middle of Booklet
suction feed system
Single Sheet
enables the feed(Up to 3 sheets)
ing of a wide range
Folded Sheet
of sheets, including
single sheets, hole punched sheets, post cards and
folded sheets.
Image Checking System IC-VAC600H
Connecting Conveyor IM-CC
Paper Inserter IM-30
Ƈ Maximum bin stack height is 125 mm (4.9”).
Ƈ With the inline mode, the IM-30 synchronizes the insertion timing automatically with the bookletmaker.
*IM-CC Conveyor is required for connection to the SPF-200A.
Ƈ With the manual feed mode, the system cycles each
time the booklet is fed into the infeeder; the operator
can control the speed of insertion and production.
Ƈ Bookletmaking without insertion is possible without
removing the IM-30
HP-200A
IM-30 Options
Connecting Conveyor IM-CC
Bypass Conveyor IM-BC
Insert Error Detector IM-SD
Compressor CMP-04
Preset Kicker PK-30
Hole Punch Unit
SPF-200A, SPF-200L
Hole Punch Unit HP-200A
Ƈ 7KH+3$FDQSHUIRUPHI¿FLHQWKROHSXQFKLQJERRNletmaking in-line with the SPF-200A.
Ƈ Necessary settings and operation can be performed automatically by inputting the sheet size in the color touchscreen on the SPF-200A. Changeover for 2 holes and 4
holes is easy for user-friendly operation.
Ƈ High speed hole punching can be performed without effect on *the production speed of the SPF-200A.
Hole punch, press and through modes can be seOHFWHGIRUHI¿FLHQWLQOLQHERRNOHWPDNLQJSURGXFWLRQ
*Production speed changes depending on the binding mode, booklet
thickness and sheet condition.
Ƈ The top-bottom transport belt insures stable booklet transportation. Blower air at fore-edge jog section is equipped as
a standard for more accurate and stable production.
HOF-400
High Speed Off-line Feeder
StitchLiner5500
Cover Feeder CF-400
Accumulator AC-400
Ƈ The HOF-400 can feed at a speed of 25,000 sheets per
hour (A3 / 11” x 17”) and 35,000 sheets per hour (A4 SEF/
8.5” x 11”). This high speed feeding is capable of handling
the output of multiple printers.
Ƈ Feature rich newly designed 7” color touch screen display
for easy and intuitive operation.
Ƈ The HOF-400 is compatible with a wide variety of system
FRQ¿JXUDWLRQVVXFKDVVKHHWIHHGLQJFRYHUIHHGLQJDFcumulating, bleed trimming and center creasing depending on your needs.
High Speed Off-line Feeder HOF-400
Ƈ The HOF-400 is equipped with a high quality feed detection system for reliable processing. If a mis-feeding
occurs in the HOF-400, the system stops before stitching.
Cover Feeder CF-400
Accumulator AC-400
Ultrasonic Sensor: Miss-feed, double-feed or jam detection
Mark sensor: Page order detection (top and last sheet)
HOF-30
High Speed Off-line Feeder
StitchLiner5500
Ƈ The system feeds at a speed of 27,000 sheets/hr., usingHorizon’s patented rotary suction feeding system.
Ƈ Maximum pile height is 430 mm (16.9”) on the sheet feed
WUD\)RUPD[LPXPHI¿FLHQF\VHWVRIWUD\VIRUVKHHW
feeding are provided as standard equipment, so one set
is always available for pre-loading.
Ƈ When connected with VAC collators, the HOF-30 is a
ÀH[LEOH¿QLVKLQJVROXWLRQVHUYLQJERWKGLJLWDODQGRIIVHW
printing. For digital work, the HOF-30 is a high-speed
sheet feeder while the VAC collator provides cover inserting. When the VAC collator is feeding offset work, the
HOF-30 serves as a bypass conveyor and reject tray for
non-stop production.
Ƈ The HOF-30 has the capability to handle variable data
applications. A mark sensor enables the HOF-30 to
handle variable sheet count documents with integrity and
YHUL¿FDWLRQ
Ƈ Accurate feed error detecting functions are equipped for
reliable sheet feeding.
Opacity sensor: Miss-feed, double-feed or jam detection
Mark sensor: Page order detection (top and last sheet)
CCD camera (Option): Image detection for the top sheetat
the accumulating area.
Machine Dimensions
Unit : mm (inch)
IM-30+StitchLiner5500+ST-40+VAC Collator
Height 1,102 / 43.4”
Height 1,027 / 40.5”
3,240 / 127.6”
Height 530 / 20.9”
ST-40
645
25.4”
400
15.8”
ST-20
ST-20R
PJ-77
PJ-77R
480
18.9”
590
23.3”
HTS-30S
1,482 / 58.4”
645
25.4”
614
24.2”
223
8.8”
ST-CV
VAC
Collator
(Tower a)
FC-200A+SPF-200A+IFU-200+VAC Collator
Height 1,070 / 42.2” Height 1,250 / 49.3”
FC-200A
FC-200L
SPF-200A
SPF-200L
VAC
Collator
IFU-200
670 / 26.4” FC-200A : 665 SPF-200A : 1,625 / 64.0”
26.2” SPF-200L : 1,856 / 73.1”
1,210 / 47.7” FC-200L : 735
29.0”
4,566 / 179.8”
Height 1,027 / 40.5” Height 1,962 / 77.3”
VAC
Collator
SA-40
934 / 36.8”
419
16.5”
Height 1,070 / 42.2”
SC-200
FC-200A
Height 1,250 / 49.3” Height 1,027 / 40.5” Height 1,962 / 77.3”
SPF-200A
ST-40
Height 1,800 / 70.9”
FC-200A+HP-200A+SPF-200A+BC-20+VAC Collator
2,290 / 90.2”
1,295 / 51.0”
1,900 / 74.9”
Height 1,070 / 42.2”
Height 330 / 13.0”
FC-200A
SC-200 FC-200L
670 / 26.4” FC-200A : 665
26.2”
FC-200L : 735
29.0”
SPF-200A
SPF-200L
SPF-200A : 1,625 / 64.0”
SPF-200L : 1,856 / 73.1”
AC-400
1,074 / 42.3”
CR-400
Height 936 / 36.9”
CF-400
HOF-400
CF-400
1,060 / 41.8”
1,294 / 51.0”
CV-400 270
175 / 6.9” 10.7”
HOF-400
960 / 37.8”
910 / 35.9”
810 / 31.9”
Height 1,070 / 42.2” Height 1,250 / 49.3” Height 910 / 35.9” Height 910 / 35.9”
3,930 / 154.8”
FC-200A+SPF-200A+AC-400+CR+400+CF-400+HOF-400
1,060 / 41.8”
SPF-30S
ACF-30
HTS-30S
HOF-30
Height 945 / 37.3”
Conveyor
VAC
Collator
(Tower a)
VAC
Collator
(Tower m)
4,172 / 164.3”
400
15.8” 860 / 33.9”
SPF-200A / FC-200A : 5,634 / 221.8”
SPF-200L / FC-200L : 5,935 / 233.6”
1,060 / 41.8”
3,240 / 127.6”
2,180 / 85.9”
3,362 / 132.4”
934 / 36.8”
1,460 / 57.5”
1,240 / 48.9”
StitchLiner5500+HOF-30+VAC Collator
810 / 31.9” 842 / 33.2”
VAC
Collator
1,400 / 55.2”
670 / 26.4” FC-200A : 665 500 / 19.7” SPF-200A : 1,625 / 64.0”
26.2”
SPF-200L : 1,856 / 73.1”
FC-200L : 735
29.0”
BC-20
1,270 / 50.0”
SPF-200A
SPF-200L
FC-200A
HP-200A
FC-200L
650 / 25.6”
SC-200
Height 1,962 / 77.3”
992 / 39.1”
810 / 31.9”
Height 1,035 / 40.8” Height 1,250 / 49.3” Height 920 / 36.3”
HOF-400+CF-400
1,230 / 48.5”
SPF-200A / FC-200A : 6,733 / 265.1”
SPF-200L / FC-200L : 7,034 / 276.9”
ST-CV
VAC
Collator
IM-30
590 / 23.3”
1,558 / 61.4”
IM-CC
2,330 / 91.8”
670 / 26.4” FC-200A : 665 SPF-200A : 1,625 / 64.0”
26.2” SPF-200L : 1,856 / 73.1”
FC-200L : 735
29.0”
1,210 / 47.7”
ST-40
650 / 25.6”
SPF-200A
SPF-200L
992 / 39.1”
810 / 31.9”
IM-30+IM-CC+FC-200A+SPF-200A+ST-40+VAC Collator
1,100 / 43.4”
FC-200A
FC-200L
Height 1,962 / 77.3”
Height 1,800 / 70.9”
470 934 / 36.8”
64.0”
Height 1,070 / 42.2” Height 1,250 / 49.3”
SC-200
VAC
Collator
(Tower m)
2,500 / 98.5”
FC-200A+SPF-200A+ST-40+SA-40+VAC Collator
LC-200
VAC
Collator
(Tower m)
100 / 4.0”
Height 1,962 / 77.3”
650 / 25.6”
SC-200
Conveyor
992 / 39.1”
810 / 31.9”
LC-200
1,900 / 74.9”
1,980 / 78.0”
IM-30
Height 1,962 (77.3”)
934 / 36.8”
650 / 25.6”
575
22.7”
CCR
CCR-DX
4,550 / 179.2”
560
22.1”
4,817 / 189.7”
Height 730 / 28.8”
ACF-30
SPF-30S
992 / 39.1”
Height 480 / 18.9”
1,060 / 41.8”
1,353 / 53.3”
3,197 / 125.9”
1,957 / 77.1”
1,060 / 41.8”
1,295 / 51.0”
2,180 / 85.9”
ST-40
810 / 31.9” 842 / 33.2”
652
25.7”
ST-60
810 / 31.9”
652
25.7”
670DMRU6SHFL¿FDWLRQV
Sheet Size
Sheet Weight Range
Production Speed
Stack Pile Height
Max. Transport Thickness
Voltage / Frequency
Machine Dimensions
Max. W350 x L500 mm / 13.8” x 19.7”
Min. W182 x L128 mm / 7.2” x 5.0”
52 to 208 gsm
2-tray: 8,000 sets per hour (A4 or 8.5” x 11” / 10 sheets / off-set stacked)
1-tray: 5,000 sets per hour (A4 or 8.5” x 11” / 10 sheets / off-set stacked)
1-tray: 8,000 sets per hour (A4 or 8.5” x 11” / 10 sheets / straight stacked)
Right Tray (A): 360 mm / 14.1”
Left Tray (B): 580 mm / 22.8”
6 mm / 0.24”
Single Phase 200 / 220 / 230 V, 50 / 60 Hz
W1,957 x D652 x H1,102 mm / 77.1” x 25.7” x 43.4”
Sheet Size
Sheet Weight Range
Production Speed
Stack Pile Height
Max. Transport Thickness
Voltage / Frequency
Machine Dimensions
Max. W350 x L500 mm / 13.8” x 19.7”
Min. W182 x L128 mm / 7.2” x 5.0”
52 to 208 gsm
8,000 sets per hour (A4 or 8.5” x 11” / 10 sheets / straight stacked)
5,000 sets per hour (A4 or 8.5” x 11” / 10 sheets / off-set stacked)
360 mm / 14.1”
6 mm / 0.24”
Single Phase 200 / 220 V, 50 / 60 Hz
Single Phase 230 V, 50 Hz
W1,353 x D652 x H1,027 mm / 53.3” x 25.7” x 40.5”(Including Feed Error Tray)
&&5&&5';0DMRU6SHFL¿FDWLRQV
Sheet Size
Stack Pile Height
Voltage / Frequency
Machine Dimensions
Max. W318 x L470 mm / 12.51” x 18.50”
Min. W148 x L210 mm / 5.82” x 8.26”
(A5 - A4) 170 mm / 6.6”
(A4 - A3) 100 mm / 3.9”
The power is supplied from the collator.
W645 x D560 x H480 mm / 25.4” x 22.1” x 18.9”
Sheet Size
Stack Pile Height
Voltage / Frequency
Machine Dimensions
Max. W320 x L450 mm / 12.60” x 17.72”
Min. W128 x L182 mm / 5.04” x 7.17”
320 mm / 12.6”
W590 x D575 x H730 mm / 23.3” x 22.7” x 28.8”
3-3-50DMRU6SHFL¿FDWLRQV
Sheet Size
Stack Pile Height
Voltage / Frequency
Machine Dimensions
Max. W320 x L460 mm / 12.60” x 18.11”
Min. W128 x L182 mm / 5.04” x 7.17”
110 mm / 4.4”
W480 x D400 x H530 mm / 18.9” x 15.8” x 20.9”
%&0DMRU6SHFL¿FDWLRQV
Sheet Size
Sheet Weight Range
Production Speed
Reject Tray Capacity
Voltage / Frequency
Machine Dimensions
Max. W350 x L500 mm / 13.78” x 19.69”
Min. W120 x L148 mm / 4.73” x 5.83”
,WGHSHQGVRQWKHFRQQHFWHGFROODWRUVSHFL¿FDWLRQV
Speed is set in three steps to match the driving speed of collator.
Max. 30 mm / 1.2”
Single Phase 200 / 220 / 240 V, 50 / 60 Hz
W1,255 x D686 x H910 mm / 49.4” x 27.0” x 35.9”
6$0DMRU6SHFL¿FDWLRQV
Sheet Size
Sheet Weight Range
Max. Thickness
Voltage / Frequency
Machine Dimensions
(Accumulate/Pass Through) Max. W350 x L500 mm / 13.78” x 19.69”
(Accumulate) Min. W140 x L204 mm / 5.52” x 8.04”
(Pass Through) Min. W120 x L148 mm / 4.73” x 5.83”
,WGHSHQGVRQWKHFRQQHFWHGFROODWRUVSHFL¿FDWLRQV
3 mm / 0.11”
Belt driving power is transmitted from the Stacker ST-40.
W710 x D600 x H850 mm / 28.0” x 23.7” x 33.5”
(When the transport section is opened)
+3$0DMRU6SHFL¿FDWLRQV
Max. W356 x L254 mm / 14.01” x 10.00”
(When inserting a paper, W356 x L235 mm / 14.01 x 9.25”)
Min. W210 x L148 mm / 8.27” x 5.83”
Max. W356 x L508 mm / 14.01” x 20.00”
Through
Min. W120 x L90 mm / 4.72” x 3.54”
Max. Thickness of Sheet Block 4 mm / 0.15” (Depending on the sheet weight)
Normal Paper: 64 to 157 gsm, Art Coated Paper: 85 to 157 gsm
Max. 3.2 mm / 0.12” (Up to 40 sheets, 20 sheets stitched and folded, of 64 gsm)
4 holes
80 mm
Dimension from the booklet spine to center of hole can be adjusted
from 9 through 14 mm with panel setting.
6 mm
Max. 4,300 booklets per hour
Punch/Press
(A5 Booklet, Booklet Thickness 2.5 mm / 0.098” or less)
Max. 4,000 booklets per hour
Fold Only
(A5 Booklet, Booklet Thickness 2.5 mm / 0.098” or less)
Single Phase 200 / 220 / 230 / 240 V, 50 / 60 Hz
W500x D770 x H1,035 mm / 19.7” x 30.4” x 40.8”
Punch/Press
Sheet Size
Sheet Weight Range
Punch Thickness
Number of Holes
Punch Hole Pitch
Punch Hole Position
Punch Hole Diameter
Production Speed
Voltage / Frequency
Machine Dimensions
,00DMRU6SHFL¿FDWLRQV
Booklet Size
(Top to Bottom x Spine to Fore-edge)
Sheet Weight Range for Booklet
Page Number of Booklet Available (Before Inserting)
Insert Position
Max. 312 x 230 mm / 12.2” x 9.0” (A4 wide, Maximum size for StitchLiner)
Min. 257 x 182 mm / 10.2” x 7.2” (B5)
Bond Pape: 64 to 210 gsm, Coated Paper: 80 to 210 gsm
4 pages (available depending on the condition) to 80 pages (82 gsm)
Middle of booklet, or Beneath top sheet
Max. W220 x L297 mm / 8.6” x 11.6”
Sheet Size
Min. W100 x L148 mm / 4.0” x 5.9” (A6)
Sheet Weight Range for Sheet Normal Paper: 64 to 210 gsm, Coated Paper: 74 to 210 gsm
Number of Sheets Inserted Up to 3 sheets
Bin Stack Height
125 mm / 4.9” / Bin
Error Detection
Feed Section Error, Separation Error, Booklet Jam
Inline with StitchLiner: Max. 4,000 booklets per hour *1
Inline with SPF-200A/FC-200A: Max. 3,600 booklets per hour *1
Production Speed
Stand-alone: Max. 3,600 booklets per hour
(Transport speed of booklet can be changed in three steps.)
3-Phase 200 / 220 V, 50 / 60 Hz
Voltage / Frequency
Machine Dimensions
W2,330 x D1,900 x H1,800 mm / 91.8” x 74.8” x 70.9”
*1 Nonstop operation with Faulty Set Ejecting Function
+2)0DMRU6SHFL¿FDWLRQV
Max. W356 x L610 mm / 14.0” x 24.0”
Min. W203 x L203 mm / 8.0” x 8.0”
Normal Paper: 52 to 157 gsm
Coated Paper: 73 to 157 gsm
Sheet Weight Range
*When you use thin sheets, you need to decrease the speed depending on the sheet size.
*The machine can feed thick sheets (157 through 209 gsm), but the feed speed will decrease.
Max. 25,000 sheets per hour [A3]
Max. 35,000 sheets per hour [A4 SEF]
Feed Speed
Max. 45,000 sheets per hour [A4 LEF]
(When the sheets are processed one by one.)
Sheet Pile Height on Feed Tray Max. 620 mm / 24.4”
Voltage / Frequency
3-phase 200-220 V, 50 Hz / 60 Hz, 3-phase 380 / 400 / 415 V, 50 Hz / 60 Hz
Machine Dimensions
W960 x D740 x H936 mm / 37.8” x 29.2” x 36.9”
Sheet Size
+2)0DMRU6SHFL¿FDWLRQV
Max. W350 x L500 mm / 13.77” x 19.68”
Min. W200 x L275 mm / 7.88” x 10.83”
Max. W350 x L500 mm / 13.77” x 19.68”
Min. W120 x L180 mm / 4.73” x 7.09”
Sheet Size
When connecting with StitchLiner,
Bypass Mode
W148 / 5.83” x L206 mm / 8.12” at minimum.)
%\¿QHDGMXVWPHQWPD[LPXPVL]HFDQEH
set up to W352 x L502mm / 13.86” x 19.76”
Sheet Weight Range
Normal Paper: 52 to 130 gsm, Coated Paper: 73 to 160 gsm
Feed Speed
Max. 27,000 sheets per hour (Three Steps Adjustable)
Sheet Pile Height on Feed Tray Max. 430 mm / 16.9”
Voltage / Frequency
Single Phase 200 / 220 / 230 V, 50 / 60 Hz
Machine Dimensions
W1,460 x D630 x H945 mm / 57.5” x 24.8” x 37.2”
HOF-30 Feed
7KHPDFKLQHGHVLJQDQGVSHFL¿FDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWDQ\QRWLFH
Distributed by
510 Kuze Ooyabu-cho, Minami-ku, Kyoto, 601-8206, Japan
Phone : +81-(0)75-934-6700 Fax : +81-(0)75-934-6708
www.horizon.co.jp
Standard Finishing Systems, 10 Connector Road, Andover, MA 01810
877-404-4460 978-470-1920 Fax 978-470-0819
www.standardfinishing.com
131105/SO/CollStitOP/01E/TV

Collators Stitchers - Standard Finishing Systems

Transcription

Similar documents

Duplo DSC 10/20 Brochure

DFC-80120 Brochure.indd

150Fr Booklet System

christmas brochure

RS 14 − BINDERY STACKER FOR SMALL PROUCTS - Rima

Product Brochure

SR-3500 / SR-6000 (Main body)

Duplo 500i Bookletmaker System Brochure

Alpine 5000 Elevator Refrigerated Food Vending Machine

Knocking-up - PCL Labels