parts catalog 2012-2013

Transcription

PARTS CATALOG
2012-2013
MagicTilt Trailers
2161 LIONS CLUB ROAD, CLEARWATER, FL 33764
(727) 535-5561 (800) 998-TILT (8458) FAX (727) 539-8472
WWW.MAGICTILT.COM
1
INDEX
INDEX
CATEGORY
PAGE(S)
TERMS & CONDITIONS
PA – TIRES & WHEELS
PD – HUBS & ACCESSORIES
PE – BEARINGS, RACES & SEALS
PF – BEARING PROTECTORS
PG – BRAKES
PH – AXLES & COMPONENTS
PI – FENDERS
PJ – SPRINGS
PK – UNDERCARRIAGE HARDWARE
PL – LIGHTING
PM – WINCHES
PN – WINCH STRAPS
PO – WINCH POSTS
PP – KEEL ROLLS & BUNK SLIDES
PQ – POLY ROLLS & RUB PADS
PR – ROLL SHAFTS
PS – ROLL BRACKETS & ASSY.
PT – BUNKS & BRACKETS
PU – TONGUES AND COUPLERS
PV – GUIDES/BOW REST
PY – FASTENERS
XB – CROSSMEMBERS
RM – MARINE CRAFT
2
3&4
4&5
5, 6 & 7
7
7, 8, 9, 10 & 11
12 , 13, 14, 15, 16 & 17
17, 18 & 19
20
20, 21 & 22
22, 23 & 24
24
24
24, 25, 26 & 27
27
28
29
29 & 30
30, 31, 32 & 33
34
35, 36 & 37
38, 39, 40, 41 & 42
42
43
WWW.MAGICTILT.COM
22
NOTES
DACROTIZED®
The target item is first dipped or sprayed with DACRODIP® solution, a water-based dispersant, before DACROTIZED® treatment is
applied through a baking process. The treatment resulting from this process gives the treated part improved corrosion resistance.
STAINLESS STEEL: There are many different grades of stainless steel. The stainless steel used in braking systems requires a fair
bit of hardness and thus uses less nickel than other grades of stainless steel. Due to this low quantity of nickel, the stainless steel
used in brakes is susceptible to rust. However, the corrosion resistance is still much greater than mild steel.
RM PARTS: Marine Craft parts are available with or without packaging (attractively mounted on heavy card stock). Please specify if
you would prefer your parts packaged or loose.
PARTS AVAILABILITY: This is a listing of our most popular parts. We do however sell thousands of other parts. If you don’t see
what you need, please call our parts department.
TERMS & CONDITIONS
SHIPPING: All orders are shipped via UPS the next business day (in most cases) unless other arrangements are made at the time
your order is placed. Manufactured parts require a three day lead time. If you are unsure if the part you are ordering is a “makepart”, please ask. There is a handling charge (handling fee will be 10% up to a maximum of $8.00, with a minimum charge of $2.00)
placed on all orders shipped via UPS. This handling charge is subject to change. Shipping insurance will be added for damage
prone parts.
Magic Tilt also may make shipments with its own trucks within established territories according to our schedule. This will be
determined on a case by case basis and will be allowed at Magic Tilt’s sole discretion.
Parts orders of $250 or more will be delivered free of charge. Parts orders may be combined with trailer orders to meet the
minimum threshold for free freight. MagicTilt reserves the right to ship orders greater than $250 in value via MagicTilt truck or UPS,
whichever is more economical. Some large items such as axles, tires, wheels and guide poles will ship via MagicTilt truck to avoid
the UPS surcharges assessed on over-sized items, but we will only do this if the order size meets the $250 threshold.
AXLES: A completed axle worksheet must be completed and submitted with each axle order.
PRICES: For two (2) years from date of retail purchase or three (3) years from date of manufacturer MagicTilt Trailers Inc. warrants
the following parts and components to be free from defects in material and workmanship when used under normal conditions for
manufactured (and designed) purpose, and provided they receive proper care: frame assembly, winch assemblyAll prices shown in
our catalog are suggested list prices and are subject to change. Discounts are determined on a dealer to dealer basis and are also
subject to change. Prices in effect at the date of shipment will prevail. If you have any questions, please contact our parts
department.
WARRANTY: For two (2) years from the date of original retail purchase or three (3) years from the date of manufacture, whichever
comes first, Magic Tilt Trailers Inc. warrants the following parts and components to be free from defects in material and
workmanship when used under normal conditions for the manufactured (and designed) purpose, and provided they receive proper
care: frame assembly, winch stand assembly, tongue assembly, roller bracket assemblies, bunk support brackets, and axle
weldment. For MagicTilt purchased parts, warranties are provided by our suppliers only and MagicTilt does not offer any additional
warranties beyond such.
RETURNS: Magic Tilt will not accept any returned merchandise without prior approval. Parts returned must be in good and
resalable condition before a credit is issued. Any return received after 30 days will be subject to a 15% restocking fee. Magic Tilt
must be notified of any shortages or incorrect shipments within ten days of receiving your shipment. Special orders are not
returnable.
PICK-UP: Magic Tilt does allow our customers to pick-up parts at our Clearwater facility, however we require that orders be placed
a minimum of twenty-four (24) hours in advance of pick-up.
Revised October 1st, 2011
33 3
PA
PA––TIRES
TIRES&&WHEELS
WHEELS
ALL
ALL
MAG
MAG
WHEELS
WHEELS
INCLUDE
INCLUDE
CENTER
CENTER
CAPS
CAPS
LUG
LUG
NUTS
NUTS
SOLD
SOLD
SEPARATELY
SEPARATELY
NEW
NEW
DESIGN!
DESIGN!
ALUMINUM
ALUMINUMMAG
MAGWHEELS
WHEELSWITH
WITHRADIAL
RADIALTIRES
TIRES
PART
PART
No.
No.
PA4068
PA4068
PA4070
PA4070
PA4072
PA4072
PA4074
PA4074
PA4078
PA4078
PA4081
PA4081
TIRE
TIRE
SIZE
SIZE
ST175/80R
1313
ST175/80R
ST205/75R
1414
ST205/75R
ST215/75R
1414
ST215/75R
ST225/75R
1515
ST225/75R
LT245/75R
1616
LT245/75R
LT235/85R
1616
LT235/85R
LOAD
BOLT
LOAD
BOLT
RANGE PATTERN
PATTERN
RANGE
CC
5Lx4.5"
5Lx4.5"
CC
5Lx4.5"
5Lx4.5"
CC
5Lx4.5"
5Lx4.5"
DD
6Lx5.5”
6Lx5.5”
EE
8Lx6.5"
8Lx6.5"
FF
8Lx6.5"
8Lx6.5"
MAX
MAX
LOAD
LOAD
1360
lbs.
1360
lbs.
1760
lbs.
1760
lbs.
1870
lbs.
1870
lbs.
2540
lbs.
2540
lbs.
3085
lbs.
3085
lbs.
3960
lbs.
3960
lbs.
PA4074
PA4074
GALVANIZED
GALVANIZED44LUG
LUGWHEELS
WHEELSWITH
WITHBIAS
BIASPLY
PLYTIRES
TIRES
PART
PART
No.
No.
PA1360
PA1360
PA1850
PA1850
LOAD
BOLT
LOAD
BOLT
RANGE PATTERN
PATTERN
RANGE
4Lx4"
CC
4Lx4"
4Lx4"
CC
4Lx4"
TIRE
TIRE
SIZE
SIZE
16.5
6.5
16.5
XX
6.5
XX
88
480X12
480X12
MAX
MAX
LOAD
LOAD
800
lbs.
800
lbs.
990
lbs.
990
lbs.
PA1660
PA1660
GALVANIZED
GALVANIZED55LUG
LUGWHEELS
WHEELSWITH
WITHBIAS
BIASPLY
PLYTIRES
TIRES
PART
PART
No.
No.
PA1660
PA1660
PA1852
PA1852
PA2950
PA2950
PA2250
PA2250
PA2450
PA2450
PA2550
PA2550
TIRE
TIRE
SIZE
SIZE
800X10
DEEP-DISH
800X10
DEEP-DISH
(205/65D-10)
(205/65D-10)
480X12
480X12
H78X15
(225/75D-15)
H78X15
(225/75D-15)
B78X13
(175/80D-13)
B78X13
(175/80D-13)
F78X14
(205/75D-14)
F78X14
(205/75D-14)
G78X14
(215/75D-14)
G78X14
(215/75D-14)
LOAD
BOLT
LOAD
BOLT
RANGE PATTERN
PATTERN
RANGE
EE
5Lx4.5”"
5Lx4.5”"
CC
DD
CC
CC
CC
5Lx4.5"
5Lx4.5"
5Lx4.5"
5Lx4.5"
5Lx4.5"
5Lx4.5"
5Lx4.5"
5Lx4.5"
5Lx4.5"
5Lx4.5"
MAX
MAX
LOAD
LOAD
1650
lbs.
1650
lbs.
GALVANIZED
GALVANIZED55LUG
LUGWHEELS
WHEELSWITH
WITHRADIAL
RADIALTIRES
TIRES
PART
PART
No.
No.
PA2153
PA2153
PA2459
PA2459
PA2463
PA2463
TIRE
TIRE
SIZE
SIZE
ST175/80R
1313
ST175/80R
ST205/75R
1414
ST205/75R
ST215/75R
1414
ST215/75R
LOAD
LOAD
RANGE
RANGE
CC
CC
CC
PA2550
PA2550
1980
lbslbs
1980
1980
lbs.
1980
lbs.
1360
lbs.
1360
lbs.
1760
lbs.
1760
lbs.
1870
lbs.
1870
lbs.
BOLT
MAX
BOLT
MAX
PATTERN LOAD
LOAD
PATTERN
5Lx4.5"
lbs.
5Lx4.5" 1360
1360
lbs.
5Lx4.5"
lbs.
5Lx4.5" 1760
1760
lbs.
5Lx4.5"
lbs.
5Lx4.5" 1870
1870
lbs.
PA2153
PA2153
PA2970
PA2970
GALVANIZED
GALVANIZED66LUG
LUGWHEELS
WHEELSWITH
WITHRADIAL
RADIALTIRES
TIRES
PART
PART
No.
No.
PA2903
PA2903
TIRE
TIRE
SIZE
SIZE
ST225/75R
1515
ST225/75R
LOAD
LOAD
RANGE
RANGE
DD
BOLT
BOLT
PATTERN
PATTERN
6Lx5.5"
6Lx5.5"
MAX
MAX
LOAD
LOAD
2540
lbs.
2540
lbs.
PA2903
PA2903
4 4
GALVANIZED 6 LUG WHEELS WITH BIAS PLY TIRES
PART No.
TIRE SIZE
PA2970
H78X15 (225/75D-15)
LOAD
RANGE
D
MAX
LOAD
2035 lbs.
BOLT
PATTERN
6Lx5.5"
GALVANIZED 8 LUG WHEELS WITH RADIAL TIRES
PART No.
TIRE SIZE
PA2905
PA2909
LT245/75R 16
ST235/85R/16
LOAD
RANGE
E
F
BOLT
PATTERN
8Lx6.5"
8Lx6.5"
MAX
LOAD
3085 lbs.
3960 lbs.
PA2909
CENTER CAPS FOR MAG WHEELS
PART No.
PC0002
FINISH
STAINLESS STEEL (POLISHED)
*Please specify wheel size.
PD1300
PD – HUBS & ACCESSORIES
DACROTIZED HUB ASSEMBLIES
PART No.
SIZE
PD1300
PD1600
PD1700
PD2500
PD2600
1-1/16
1-1/16
1-3/8X1-1/16
1-1/4X1-3/4
1-1/4X1-3/4
BOLT
PATTERN
4Lx4"
5Lx4.5"
5Lx4.5"
6Lx5.5"
8Lx6.5"
PD2000
**HUB ASSEMBLIES INCLUDE: RACES, SEAL, BEARINGS, DUST CAP, LUG NUTS AND COTTER PIN.
CAST HUB & DRUM ASEMBLIES
PART No.
DIAMETER
SIZE
PD1900
PD2000
PD2260
8-1/2"
10"
12"
1-3/8X1-1/16
1-3/8X1-1/16
1-1/4X1-3/4
BOLT
PATTERN
5Lx4.5"
5Lx4.5"
6Lx5.5"
PD1665
**HUB & DRUM ASSEMBLIES INCLUDE: RACES, SEAL, BEARINGS, DUST CAP, LUG NUTS AND COTTER PIN.
DACROTIZED HUBS (WITH RACE)
PART No.
SIZE
PD1360
PD1750
1-1/16"
1-3/8X1-1/16
BOLT
PATTERN
4Lx4"
5Lx4.5"
PD2155
CAST HUB & DRUMS (WITH RACE)
PART No.
DIAMETER
SIZE
PD1852
PD2050
12"
10"
1-1/4X1-3/4
1-3/8X1-1/16
BOLT
PATTERN
6Lx5.5"
5Lx4.5"
5 5
LUG NUTS
THREAD
PART No.
DESCRIPTION
FINISH
PD2250
PD2251
PD2252
PD2253
PD2255
LUG NUT
LUG NUT
LUG NUT
LUG NUT
LUG NUT (LONG)
ZINC
CHROME
CHROME
S/S
S/S
13/16"
½” x 20
13/16"
13/16”
13/16"
PD2250
WHEEL STUDS
PART No.
DESCRIPTION
FINISH
THREAD
PD2400
PG4860
PG4861
LUG BOLT
PRESS-IN STUD (STD)
PRESS-IN STUD (LONG)
ZINC
ZINC
ZINC
13/16"
13/16"
13/16"
PE – BEARINGS, RACES & SEALS
PE1100
BEARING KITS
PART
NO.
PE1100
PE1101
PE1150
PE1151
PE1200
PE1201
PE1250
PE1251
PE1255
PE1256
DESCRIPTION
BEARING KIT
BEARING KIT (UFP STYLE)
BEARING KIT
BEARING KIT
BEARING KIT, HEAVY DUTY
BEARING KIT, HEAVY DUTY
(UFP STYLE)
BEARING KIT 8 LUG
BEARING KIT, 8 LUG (UFP STYLE)
SPINDLE SIZE
1-1/16"
1-1/16"
1-3/8” X 1-1/16"
1-3/8” X 1-1/16"
1-3/4” X 1-1/4"
1-3/4” X 1-1/4"
1-3/4” X 1-1/4"
1-3/4” X 1-1/4"
PE1201
1-3/4” X 1-1/4"
1-3/4” X 1-1/4"
**ALL BEARING KITS INCLUDE: SEAL, INNER BEARINGS, OUTER BEARINGS, INNER RACE, OUTER RACE & COTTER PIN
UFP STYLE KITS USE RACE PART NO. PE1749 [68110], NON-UFP STYLE KITS USE RACE PART NO. PE1750 [68111]
6 6
BEARINGS
PART
NO.
PE1400
PE1450
PE1500
PE1550
PE1555
PE1600
DESCRIPTION
BEARING
BEARING
BEARING
BEARING
BEARING, 8LUG
BEARING
SPINDLE
SIZE
1-1/16"
1-3/8"
1-1/4"
1-1/4
1-1/4"
1-3/4"
COMMERCIAL
NUMBER
44649
68149
67048
15123
4T-14125A
25580
SPINDLE
SIZE
1-1/16"
1-3/8"
1-3/8"
1-1/4"
1-1/4”
1-1/4"
1-3/4"
COMMERCIAL
NUMBER
44610
68110
68111
67010
15245
4T-14276
25520
SPINDLE
SIZE
1-1/16"
1-1/16"
1-3/8”
1-3/8"
COMMERCIAL
NUMBER
198-125
198-138
255-171
257-168
1-3/4
22333
1-3/4
21333
PE1400
RACES
PART
NO.
PE1710
PE1749
PE1750
PE1800
PE1850
PE1855
PE1900
DESCRIPTION
RACE
RACE (UFP)
RACE (NON-UFP)
RACE
RACE, 6 LUG
RACE, 8 LUG
RACE
PE1800
SEALS
PART
NO.
PE2010
PE2015
PE2050
PE2055
DESCRIPTION
PE2100
SEAL (UCF)
SEAL (UFP)
SEAL (UCF)
SEAL (UFP)
SEAL (UCF)
PE2101
SEAL (UFP)
(FOR 4X4 TORSION AXLES)
PE2101
SPINDLE SEAL KITS FOR UFP SPINDLES
PART
NO.
PE2160
PE2162
PE2164
SPINDLE
SIZE
1-3/8"
1-1/16"
1-3/4
PE2160
**SPINDLE SEAL KITS ARE FOR UFP SPINDLES AND ARE SOLD IN PAIRS.
**INCLUDES O-RINGS
DUST CAPS
PART
NO.
PE2250
PE2301
PE2304
PE2305
PE2308
NOTE
STANDARD
WITH CENTER HOLE
FOR 6 LUG HUB OR DISC
FOR 8 LUG HUB
WITH CENTER HOLE FOR 8 LUG
SIZE
1.980
1.980
2.328
2.717
2.717
PE2250
7 7
RUBBER PLUGS FOR CENTER HOLE CAP
PART
NO.
SIZE
PE2306
PE2307
PE2311
**FOR KNOTT AXLES ONLY
1.980**
1.980
2.328
PE2311
PF – BEARING PROTECTORS
BEARING PROTECTORS
PART
NO.
PF1053
PF1054
NOTES
SIZE
SET S/S (PAIR)
S/S (EACH)
1.98
1.98
PF1054
BEARING PROTECTOR BRAS
PART
NO.
PF1060
PF1063
SIZE
1.98
2.328/2.717
PG – BRAKES
PF1060
COMPLETE BRAKE KITS
PART
NO.
PG0999
PG1001
PG1001-1
PG1002
PG1008
PG1030
PG1030-1
PG1031
PG1033
PG1037
PG1038
PG1040
PG1042
PG1334
DESCRIPTION
DRUM BRAKE KIT
DRUM BRAKE KIT, WITH PREMIER BRAKES
DISC BRAKE KIT
DISC BRAKE KIT
DISC BRAKE KIT
DISC BRAKE KIT
DISC BRAKE KIT
DISC BRAKE KIT
SECOND AXLE DISC BRAKE KIT
SECOND AXLE DISC BRAKE KIT
BRAKE LINE KIT - UPGRADE SINGLE AXLE TO TRIPLE
DISC BRAKE KITS INCLUDE:
(2) INNER BEARINGS, 1-3/8”
(2) OUTER BEARINGS, 1-1/6”
(2) SEALS, 1-3/8”
(1) ACTUATOR
(1) 8’ BRAKE LINE
(1) 23’ BRAKE LINE
(2) DISC ROTOR & HUB - DACRO 5L
(1) DISC BRAKE CALIPER ASSEMBLY LH
(1) DISC BRAKE CALIPER ASSEMBLY RH
(4) 7/16" STAR WASHER
(4) 7/16"X1" BOLT
(1) 5 WAY WIRE HARNESS 32'
(6) PLASTIC WIRE TIE HD 14-1/2"
(3) PLATED BOLTS 1/2"X4-1/2” GRADE 5
(3) PLATED NUT LOCK NI 1/2"-13
(2) 40” CHAINS
DRUM BRAKE KITS INCLUDE:
(2) HUB&DRUM W/RACE 5L
(2) SEALS, 1-3/8”
(2) DUST CAP 1" (1.980)
(1) ACTUATOR
(1) T-FITTING
(1) 1’ BRAKE LINE
(1) 6’ 6” BRAKE LINE
(1) 23’ BRAKE LINE
(2) BRAKE CLUSTER
(8) PLATED BOLT 7/16” X 1”
GRADE 5
(8) PLATED NUT LOCK NI 7/16”-14
(2) 40” CHAINS
FINISH
AXLES
SIZE
CAPACITY
E-COAT
E-COAT
E-COAT
E-COAT
E-COAT
E-COAT
S/S
E-COAT
E-COAT
E-COAT
E-COAT
N/A
N/A
N/A
1
1
1
1
2
1
1
1
1
1
1
N/A
N/A
N/A
8”
10”
10”
10”
12”
10”
10”
10”
10”
12”
12”
10”
12”
N/A
6,000 LBS.
6,000 LBS.
10,000 LBS.
7,500 LBS.
16,000 LBS.
6,000 LBS.
6,000 LBS.
7,500 LBS.
16,000 LBS.
16,000 LBS.
20,000 LBS.
N/A
N/A
N/A
SECOND AXLE DISC BRAKE KITS
INCLUDE:
(2) SEALS, 1-3/8”
(1) 4’ BRAKE LINE
(1) 8’ BRAKE LINE
(2) DISC ROTOR & HUB-DACRO 5L
(1) DISC BRAKE CALIPER
ASSEMBLY LH
(1) DISC BRAKE CALIPER
ASSEMBLY RH
(4) 7/16" STAR WASHER
(4) 7/16"X1" BOLT
PG1334 KIT INCLUDES:
(1) HYD. BRAKE/BRASS TFITTING
(1) 1’ BRAKE LINE
(1) 4’ BRAKE LINE
(12) PLASTIC WIRE TIE, HD
14-1/2"
8 8
ACTUATORS FOR 3” TONGUES, TITAN DRUMS
PART
NO.
PG1050
PG1060
PG1850
DESCRIPTION
CAPACITY
FOR TITAN DRUM ONLY
FOR TITAN DRUM ONLY
FOR TITAN DRUM ONLY
6,000 LBS.
7,500 LBS.
10,000 LBS.
PG1050
** ALL UFP & DEMCO ACTUATORS INCLUDE A BACKUP SOLENOID
ACTUATORS FOR 3” TONGUES, IN-LINE
PART
NO.
PG1088
PG1090
PG1090-2
DESCRIPTION
IN-LINE, DISC, 3 HOLE (UFP)
IN-LINE, DISC (UFP) 4 HOLE
IN-LINE, FOR SWING TONGUES
CAPACITY
6,000 LBS.
7,500 LBS.
7,500 LBS.
PG1090
ACTUATORS FOR 3” TONGUES, LARGE CAPACITY
PART
NO.
PG1095
PG1096
DESCRIPTION
PART
NO.
PG1178
PG1173
PG1181
PG1183
PG1184
PG1185
PG1186
PG1187
PG1188
PG1190
PG1192
PG1193
PG1194
CAPACITY
TRIPLE AXLE DISC (UFP)
WITH LOCKOUT INSTALLED (DEMCO)
BRAKE HOSES
PG1088
16,000 LBS.
20,000 LBS.
PG1060
LENGTH
1'
1' 6"
4'
6' 6"
7'
16'
8'
18'
19'
21'
23'
24'
26'
**Brake line colors may vary.
PG1096
PG1178
PG1190
BRAKE LINE KITS FOR SINGLE AXLE
PART
NO.
PG1325
PG1326
PG1328
PG1330
PG1336
PG1340
LENGTH
19'
21'
23'
24'
26'
30’
*ADD “-1” FOR KITS WITH DOUBLE BANJO FITTINGS
BRAKE LINE KITS INCLUDE:
(1) T-FITTING
(1) 1’ BRAKE LINE
(1) 19’ – 26’ BRAKE LINE (DEPENDING ON
THE KIT)
(10) PLASTIC WIRE TIE, HD 14-1/2"
(2) CALIPER FITTING PLUGS (FOR DISC
BRAKES ONLY)
9
99
BRAKE LINE UPGRADE KITS FOR SINGLE TO DOUBLE AXLE
BRAKE LINE UPGRADE KITSLENGTH
FOR SINGLE TO DOUBLE AXLE
PART
PART
NO.
NO.
PG1332
PG1332
PG1332-1
PG1332-1
LENGTH
STANDARD
STANDARD
DOUBLE
BANJO
DOUBLE BANJO
BRAKE SYSTEM COMPONENTS
BRAKE SYSTEM COMPONENTS
PART
DESCRIPTION
PART
NO.
DESCRIPTION
NO.
PG1175 BRAKE/BRASS T-FITTING
PG1175 BRAKE
BRAKE/BRASS
T-FITTING
PG2200
LINE COUPLER,
3/16"
PG2200 BRAKE LINE COUPLER, 3/16"
HUB & DRUM ASSEMBLIES
HUB & DRUM ASSEMBLIES
PART
PART
NO.
NO.
PG1150
PG1150
PG1800
PG1800
HUB SIZE
HUB SIZE
10”
10”
8”
8”
DISC ROTOR & HUBS
DISC ROTOR & HUBS
PART
PART
NO.
NO.
PG2026
PG2026
PG2027
PG2027
DIAMETER
DIAMETER
10"
10"
12"
12"
PG2200
PG2200
BOLT PATTERN
BOLT PATTERN
5Lx4.5"
5Lx4.5"
5Lx4.5"
5Lx4.5"
FINISH
FINISH
E-COAT
E-COAT
E-COAT
E-COAT
BOLT PATTERN
BOLT PATTERN
5Lx4.5"
5Lx4.5"
6Lx5.5"
6Lx5.5"
DISC BRAKE ASSEMBLIES
BRAKE
*CDISC
heck availability
onASSEMBLIES
Kodiak brake parts*
*Check availability on Kodiak brake parts*
PART
PART
NO.
NO.
PG2001
PG2001
PG2031
PG2031
PG2031-2
PG2031-2
PG2033
PG2033
PG2033-2
PG2033-2
PG2035
PG2035
PG2035-2
PG2035-2
PG2003
PG2003
PG2020-1
PG2020-1
BRAND
BRAND
KODIAK
KODIAK
UFP
UFP
UFP
UFP
UFP
UFP
UFP
UFP
UFP
UFP
UFP
UFP
KODIAK
KODIAK
KODIAK
KODIAK
FINISH
FINISH
E-COAT
E-COAT
NONE
NONE
STAINLESS STEEL
STAINLESS STEEL
E-COAT
E-COAT STEEL
STAINLESS
STAINLESS
STEEL
E-COAT
E-COAT STEEL
STAINLESS
STAINLESS
STEEL
SILVER CADIUM
SILVER
CADIUM
E-COAT
E-COAT
DIAMETER
DIAMETER
10”
10”
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12”
12”
13”
13”
BOLT
BOLT
PATTERN
PATTERN
5Lx4.5"
5Lx4.5"
5Lx4.5"
5Lx4.5"
5Lx4.5"
5Lx4.5"
6Lx5.5"
6Lx5.5"
6Lx5.5"
6Lx5.5"
8Lx6.5"
8Lx6.5"
8Lx6.5"
8Lx6.5"
6Lx5.5”
6Lx5.5”
8Lx6.5”
8Lx6.5”
DISC BRAKE ASSEMBLIES INCLUDE:
DISC
BRAKE
ASSEMBLIES INCLUDE:
(2)
INNER
BEARINGS
(2)OUTER
INNER BEARINGS
BEARINGS
(2)
(2)SEALS
OUTER BEARINGS
(2)
(2)ROTORS
SEALS WITH INTEGRAL HUBS
(2)
(2)CALIPERS
ROTORS WITH INTEGRAL HUBS
(2)
(2)MOUNTING
CALIPERS BOLTS
(8)
(8)STAR
MOUNTING
BOLTS
(8)
WASHERS
(8)COTTER
STAR WASHERS
(2)
PINS
(2) COTTER PINS
PG1150
PG1150
PG2026
PG2026
PG2027
PG2027
10
BRAKE CLUSTERS
BRAKE
PART CLUSTERS
NO.
PART
NO.
PG1750
PG1750
PG2300
PG2300
PG2300L
PG2300L
PG2300R
PG2300R
PG2310
PG2310
PG2310L
PG2310L
PG2310R
PG2310R
CONFIGURATION
CONFIGURATION
PAIR
PAIR
PAIR
LEFT
LEFT
RIGHT
RIGHT
PAIR
PAIR
LEFT
LEFT
RIGHT
RIGHT
PG1150 ASSEMBLY INCLUDES:
(2)
HUB&DRUM
W/RACE,
10" 5L
PG1150
ASSEMBLY
INCLUDES:
(2)
1-1/16"
(2) BEARING
HUB&DRUM
W/RACE, 10" 5L
(2) BEARING
BEARING 1-1/16"
1-3/8"
(2)
(2)
SEAL 1-3/8"
(2) BEARING
1-3/8"
(2)
CAP 1" (1.980)
(2) DUST
SEAL 1-3/8"
(2)
COTTER
PIN
(2) DUST CAP 1" (1.980)
(5) LUG
NUTS
(2)
COTTER
PIN
10 10
DIAMETER
DIAMETER
8"
8"
10"
10"
10"
10"
12"
12"
12"
12"
BOLT PATTERN
BOLT PATTERN
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
PG2310
PG2310
(5) LUG NUTS
MISCELLANEOUS DRUM BRAKE COMPONENTS
MISCELLANEOUS
DRUM BRAKE COMPONENTS
PART
NO.
PART
NO.
PG1078
PG1078
PG2100
PG2100
PG2150
PG2150
PG2252
PG2252
PG2350
PG2350
PG3020
PG3020
PG3021
PG3021
PG3052
PG3052
DESCRIPTION
DESCRIPTION
BRAKE LOCKOUT CAP, IN-LINE (UFP)
BRAKE FLANGE,
LOCKOUT4CAP,
BOLTIN-LINE (UFP)
4 BOLT
BRAKE FLANGE, 5
FLANGE, 5 BOLT
BRAKE LOCKOUT,
ELECTRIC (QUALITY)
LOCKOUT,
BRAKE BATH
KIT ELECTRIC (QUALITY)
BRAKE BATH
KIT
WHEEL
CYLINDER, L/H
L/H
BRAKE WHEEL CYLINDER, R/H
BRAKE WHEEL
CYLINDER,
R/H KIT (TITAN)
MODEL
60 LEVER-LOCK
REPAIR
MODEL 60 LEVER-LOCK REPAIR KIT (TITAN)
PG1078
PG1078
MASTER CYLINDERS
MASTER
CYLINDERS
PART
DESCRIPTION
NO.
PART
DESCRIPTION
NO.
PG3060
MODEL 60 MASTER CYLINDER KIT (TITAN)
PG3060 MODEL 6
60MASTER
MASTERCYLINDER
CYLINDER(TITAN)
KIT (TITAN)
PG3100
PG3100 MODEL 10
6 MASTER
PG3206
MASTERCYLINDER
CYLINDER(TITAN)
(TITAN)
PG3206 MODEL
MASTER CYLINDER
(TITAN)
PG4814
MASTER10CYLINDER
WITHOUT SOLENOID
(UFP) **
PG4814 CALL
MASTER
WITHOUT SOLENOID (UFP) **
**PLEASE
FOR CYLINDER
AVAILABILITY
**PLEASE CALL FOR AVAILABILITY
MASTER CYLINDER CAPS
MASTER
CYLINDER CAPS
PART
NO.
PART
NO.
PG3102
PG3102
PG3104
PG3104
PG3208
PG3208
PG4819
PG4819
DESCRIPTION
DESCRIPTION
MODEL 6 MASTER CYLINDER CAP (TITAN)
MODEL 60
6 MASTER
MASTERCYLINDER
CYLINDERCAP
CAP(TITAN)
(TITAN)
CYLINDER
MODEL 60
10 MASTER
FILLER CAP
(TITAN) CAP (TITAN)
MODEL
10 FILLER
(TITAN)
RESERVOIR
PLUGCAP
(UFP)
RESERVOIR PLUG (UFP)
PG4819
PG4819
PG3208
PG3208
Either style
may be shipped
Either style may be shipped
PG3060
PG3060
PG3100
PG3100
11 11
DISK BRAKE CALIPERS
PART
NO.
PG5003
PG5003-1
PG5005
PG5005-1
PG5011
PG5016
FINISH
BRAND
DESCRIPTION
NONE
STAINLESS
NONE
STAINLESS
E-COAT
E-COAT
UFP
UFP
UFP
UFP
KODIAK
KODIAK
DISC BRAKE CALIPER ASSEMBLY, LH
DISC BRAKE CALIPER ASSEMBLY, RH
PG5003
ELECTRIC OVER HYDRAULIC
PART
NO.
PG3229
PG3240
PG3250
DESCRIPTION
TEKONSHA ELECTRIC BRAKE CONTROLLER
HYDRASTAR ELECTRIC OVER HYDRAULIC 20K ACTUATOR
ELECTRIC OVER HYDRAULIC BRAKE KIT - 20K
LATCH REPLACEMENT KITS
DESCRIPTION
PART
NO.
PG4808 LATCH REPLACEMENT KIT (UFP) FOR 2” BALLS ONLY
PG4822 A-70 LATCH REPLACEMENT KIT (UFP) FOR 2” BALLS ONLY
PG3240
BRAKE CALIPER COMPONENTS
PART
DESCRIPTION
NO.
PG4849 UNIVERSAL BRAKE PAD DB35 (UFP)
PG4862 CALIPER FITTING PLUG
PG5007 7/16" X 1" SHCS BOLT FOR DISC CALIPER
PG5058 DISC BRAKE ADAPTER PLATE FOR 7000# TORSION
MISCELLANEOUS DISC BRAKE SYSTEM COMPONENTS
DESCRIPTION
PART
NO.
PG3056 MODEL 60 BREAK-AWAY LEVER ASSEMBLY (TITAN)
PG3210 MODEL 10 CONNECTOR (TITAN)
PG3216 MODEL 10 BREAK-AWAY LEVER ASSEMBLY(TITAN)
PG4812 BREAK AWAY CABLE (UFP)
PG4815 SOLENOID ASSEMBLY (UFP) **
PG4820 HITCH PIN KIT (UFP) **
PG4823 A-70 HITCH PIN KIT (UFP) **
PG4860 PRESS-IN STUD (STANDARD) (UFP)
PG4861 PRESS IN STUD (LONG) UFP
PG5091 DISC BRAKE PAD SET (KODIAK)
PG4808
PG3056
PG4815
12
1.5” X 1.5” SPRING AXLES
1.5”
X 1.5” SPRING AXLES
PART
PART
NO.
NO.
PH2624
PH2624
PH2631
PH2631
PH2636
PH2636
PH2635
PH2635
DESCRIPTION
DESCRIPTION
1.5” X 1.5”
1.5” X
X 1.5”
1.5”
1.5”
1.5” X
X 1.5”
1.5”
1.5”
1.5”
X
1.5” W/1-1/16" BEARINGS
1.5” X 1.5”
1.5” X 1.5” W/1-1/16" BEARINGS
TYPE
TYPE
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
2” X 2” SPRING AXLES
2” PART
X 2” SPRING AXLES
PART
NO.
NO.
PH3200
PH3200
PH2730
PH2730
PH2800
PH2800
PH3000
PH3000
PH3201
PH3201
PH4011
PH4011
PH4015
PH4015
PH4055
PH4055
PH4723
PH4723
PH4738
PH4738
PH3254
PH3254
PH3254-1
PH3254-1
PH4703-1
PH4703-1
PH4811
PH4811
PH6015
PH6015
PH4101-1
PH4101-1
PH4766-1
PH4766-1
PH4152
PH4152
DESCRIPTION
DESCRIPTION
2" X 2"
2" X
X 2"
2"
2"
2" X
X 2"
2"
2"
2"
X
2"
2" X 2"
2"
X
2"
2" X 2"
2"
X
2"
2" X 2"
2"
X
2"
2" X 2"
2" X
X 2"
2"
2"
2"
X
2"
2" X 2"
2"
X
2"
2" X 2"
2"
X
2" W/FLANGE
2" X 2"
2"
X
2" X 2"
2" W/FLANGE
W/FLANGE
2" X
X 2"
2" W/FLANGE
W/FLANGE
2"
2"
2" X
X 2"
2" W/FLANGE
W/FLANGE
2" X
X 2"
2" W/FLANGE
W/FLANGE
2"
2"
X
2"
W/FLANGE
2" X 2" W/DISC
BRAKES
2"
X
2"
W/DISC
BRAKES
2" X 2" W/DISC BRAKES
2" X
X 2"
2" W/10"
W/DISC
BRAKESDRUM BRAKES
2"
PREMIUM
2" X 2" W/10" PREMIUM DRUM BRAKES
2” X 2” HEAVY DUTY SPRING AXLES
2” PART
X 2” HEAVY DUTY SPRING AXLES
PART
NO.
NO.
PH4716-3
PH4716-3
PH4760
PH4760
PH4715
PH4715
PH4716
PH4716
PH4766
PH4766
PH6016
PH6016
PH2900
PH2900
PH2901
PH2901
PH3251
PH3251
PH3271
PH3271
DESCRIPTION
DESCRIPTION
2" X 2" HD
2" X
X 2"
2" HD
HD
2"
2"
X
2"
HD
2" X 2" HD
2" X
X 2"
2" HD
HD
2"
2" X
X 2"
2" HD
HD
2"
2"
X
2"
HD
2" X 2" HD
2"
X
2"
HD W/FLANGE
2" X 2" HD
2"
X
2"
HD W/FLANGE
W/FLANGE
2" X 2" HD
2"
X
2"
HD
W/FLANGE
2" X 2" HD W/FLANGE
2" X
X 2"
2" HD
HD W/FLANGE
W/FLANGE
2"
2" X 2" HD W/FLANGE
12 12
TRACK
TRACK
47"
47"
47"
47"
56"
56"
56"
56"
SPRING
SPRING
CENTERS
CENTERS
37"
37"
37"
37"
46"
46"
46"
46"
HUBS
HUBS
4 LUG
4 LUG
NONE
NONE
NONE
NONE
4 LUG
4 LUG
TYPE
TYPE
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
TRACK
TRACK
86-1/2"
86-1/2"
62"
62"
71"
71"
79"
79"
86-1/2"
86-1/2"
81-1/2"
81-1/2"
81"
81"
84"
84"
91"
91"
93"
93"
86-1/2"
86-1/2"
87"
87"
93-1/2"
93-1/2"
93"
93"
93"
93"
84"
84"
93"
93"
84"
84"
SPRING
SPRING
CENTERS
CENTERS
73-3/8"
73-3/8"
49-3/8"
49-3/8"
57-3/8"
57-3/8"
57-3/8"
57-3/8"
73-3/8"
73-3/8"
68-3/8"
68-3/8"
67-1/2"
67-1/2"
67"
67"
73"
73"
76"
76"
73-3/8"
73-3/8"
73-3/8"
73-3/8"
80-3/8"
80-3/8"
77-1/2"
77-1/2"
79"
79"
67"
67"
76"
76"
67"
67"
HUBS
HUBS
5 LUG
5
5 LUG
LUG
5 LUG
LUG
5
5
LUG
5 LUG
5
LUG
5 LUG
5
LUG
5 LUG
5 LUG
LUG
5
5
5 LUG
LUG
5
LUG
5 LUG
5
LUG
NONE
NONE
NONE
NONE
NONE
NONE
5
LUG
5 LUG
NONE
NONE
NONE
NONE
5
LUG
5
LUG
5 LUG
5 LUG
LUG
5
5 LUG
TYPE
TYPE
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
"V"
"V"
STRAIGHT
STRAIGHT
TRACK
TRACK
91"
91"
93"
93"
91"
91"
91"
91"
93"
93"
93"
93"
71"
71"
71"
71"
86-1/2"
86-1/2"
88"
88"
SPRING
SPRING
CENTERS
CENTERS
73"
73"
77"
77"
73"
73"
73"
73"
76"
76"
79"
79"
57-3/8"
57-3/8"
57-3/8"
57-3/8"
73-3/8"
73-3/8"
73-3/8"
73-3/8"
HUBS
HUBS
NONE
NONE
5
LUG
5
5 LUG
LUG
5 LUG
NONE
NONE
5
LUG
5
LUG
5 LUG
5
5 LUG
LUG
5 LUG
NONE
NONE
5
LUG
5
5 LUG
LUG
5 LUG
13
13
13
2” X 2” HEAVY DUTY SPRING AXLES
(CONT.)
13
2” PART
X 2” HEAVY DUTY SPRING AXLES (CONT.)
DESCRIPTION
TYPE
2” PART
X
2” HEAVY DUTY
SPRING AXLES (CONT.)
NO.
PART
NO.
PH4098
NO.
PH4098
PH4099
PH4098
PH4099
PH4100
PH4099
PH4100
PH4101
PH4100
PH4101
PH4102
PH4101
PH4102
PH4103
PH4102
PH4103
PH4700
PH4103
PH4700
PH4704-2
PH4700
PH4704-2
PH4705
PH4704-2
PH4705
PH4707
PH4705
PH4707
PH4767
PH4707
PH4767
PH4767
2”
2”
2”
X 3” SPRING AXLES
X
3” SPRING AXLES
PART
DESCRIPTION
X
3” SPRING AXLES
PART
NO.
PART
NO.
PH4730
NO.
PH4730
PH4731
PH4730
PH4731
PH4740
PH4731
PH4740
PH4742
PH4740
PH4742
PH4769
PH4742
PH4769
PH4771
PH4769
PH4771
PH4772
PH4771
PH4772
PH4781
PH4772
PH4781
PH5521
PH4781
PH5521
PH4302
PH5521
PH4302
PH4741
PH4302
PH4741
PH4741-1
PH4741
PH4741-1
PH4765
PH4741-1
PH4765
PH4303
PH4765
PH4303
PH3319
PH4303
PH3319
PH4301
PH3319
PH4301
PH4740-1
PH4301
PH4740-1
PH4742-1
PH4740-1
PH4742-1
PH6017
PH4742-1
PH6017
PH4301-1
PH6017
PH4301-1
PH4739
PH4301-1
PH4739
PH4771-1
PH4739
PH4771-1
PH4776
PH4771-1
PH4776
PH4778
PH4776
PH4778
PH4778
2”
2”
2”
DESCRIPTION
2" X 2" HD W/FLANGE
DESCRIPTION
2" X 2" HD W/FLANGE
2"
2" X
X 2"
2" HD
HD W/FLANGE
W/FLANGE
2"
2" X
X 2"
2" HD
HD W/FLANGE
W/FLANGE
2"
X
2"
HD
W/FLANGE
2" X 2" HD W/FLANGE
2"
2" X
X 2"
2" HD
HD W/FLANGE
W/FLANGE
2"
X
2"
HD
2" X 2" HD W/FLANGE
W/FLANGE
2"
2" X
X 2"
2" HD
HD W/FLANGE
W/FLANGE
2"
2" X
X 2"
2" HD
HD W/FLANGE
W/FLANGE
2"
X
2"
HD
W/FLANGE
2" X 2" HD W/FLANGE
2"
2" X
X 2"
2" HD
HD W/FLANGE
W/FLANGE
2"
X
2"
HD
2" X 2" HD W/FLANGE
W/FLANGE
2" X 2" HD W/FLANGE
DESCRIPTION
DESCRIPTION
2" X 3"
2" X 3"
2" X
X 3"
3"
2"
2"
X
3"
2" X 3"
2"
X
3"
2" X 3"
2" X
X 3"
3"
2"
2" X
X 3"
3"
2"
2"
X
3"
2" X 3"
2"
X
2" X 3"
3"
2" X
X 3"
3" W/1-3/4" SPINDLES
2"
2"
X
3"
2" X 3" W/1-3/4" SPINDLES
2" X
X 3"
3" W/1-3/4"
W/1-3/4" SPINDLES
SPINDLES
2"
2"
X
3"
W/1-3/4"
SPINDLES
2" X 3" W/1-3/4" SPINDLES
2"
X
3"
W/1-3/4"
SPINDLES
W/1-3/4" SPINDLES
2" X 3" W/FLANGE
& 1-3/4" SPINDLES
2"
X
3"
W/1-3/4"
SPINDLES
2" X 3" W/FLANGE & 1-3/4" SPINDLES
2"
2" X
X 3"
3" W/FLANGE
W/FLANGE & 1-3/4" SPINDLES
2" X
X 3"
3" W/FLANGE
W/FLANGE
2"
2"
2" X
X 3"
3" W/FLANGE
W/FLANGE
2"
X
3"
W/FLANGE
2" X 3" W/FLANGE
2"
X
3"
W/FLANGE
W/FLANGE
2" X 3" W/DISC
BRAKES
2"
X
3"
W/FLANGE
2" X
X 3"
3" W/DISC
W/DISC BRAKES
BRAKES
2"
2"
2" X
X 3"
3" W/DISC
W/DISC BRAKES
BRAKES
2" X
X 3"
3" W/DISC
W/DISC BRAKES
BRAKES
2"
2"
X
3"
W/DISC
BRAKES
X 3” HEAVY DUTY SPRING AXLES
X
3” HEAVY DUTY SPRING AXLES
PART
DESCRIPTION
X
3” HEAVY DUTY
SPRING AXLES
PART
NO.
PART
NO.
PH3256
NO.
PH3256
PH3263
PH3256
PH3263
PH4037
PH3263
PH4037
PH4104
PH4037
PH4104
PH4106
PH4104
PH4106
PH4107
PH4106
PH4107
PH4108
PH4107
PH4108
PH4202
PH4108
PH4202
PH4725
PH4202
PH4725
PH4725-1
PH4725
PH4725-1
PH4735
PH4725-1
PH4735
PH4735
DESCRIPTION
2" X 3" HD W/FLANGE
DESCRIPTION
2" X 3" HD W/FLANGE
2" X
X 3"
3" HD
HD W/FLANGE
W/FLANGE
2"
2"
X
3"
HD
W/FLANGE
2" X 3" HD W/FLANGE
2"
X
3"
HD
W/FLANGE
2" X 3" HD W/FLANGE
2"
X
3"
HD
W/FLANGE
2" X 3" HD W/FLANGE
2"
X
3"
HD
2" X 3" HD W/FLANGE
W/FLANGE
2" X
X 3"
3" HD
HD W/FLANGE
W/FLANGE
2"
2"
X
3"
HD
W/FLANGE
2" X 3" HD W/FLANGE
2"
X
3"
HD
2" X 3" HD W/FLANGE
W/FLANGE
2" X
X 3"
3" HD
HD W/FLANGE
W/FLANGE
2"
2"
X
3"
HD
W/FLANGE
2" X 3" HD W/FLANGE
2" X 3" HD W/FLANGE
TYPE
STRAIGHT
TYPE
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
STRAIGHT
STRAIGHT
"V"
STRAIGHT
"V"
"V"
TRACK
TRACK
84"
TRACK
84"
84"
84"
84"
84"
84"
84"
84"
84"
84"
84"
93-1/2"
84"
93-1/2"
93-1/2"
93-1/2"
93-1/2"
93-1/2"
95"
93-1/2"
95"
93"
95"
93"
93"
SPRING
SPRING
CENTERS
SPRING
CENTERS
68"
CENTERS
68"
68"
68"
67"
68"
67"
67"
67"
67"
67"
67"
67"
80-3/8"
67"
80-3/8"
80-3/8"
80-3/8"
80-3/8"
80-3/8"
80-3/8"
80-3/8"
76"
80-3/8"
76"
76"
HUBS
HUBS
NONE
HUBS
NONE
5 LUG
NONE
5 LUG
5
5 LUG
LUG
5
LUG
5 LUG
NONE
5 LUG
NONE
NONE
NONE
5
LUG
NONE
5 LUG
5
5 LUG
LUG
NONE
5
LUG
NONE
NONE
NONE
NONE
NONE
NONE
TYPE
TYPE
"V"
TYPE
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
"U"
"V"
"U"
"V"
"U"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
"V"
TRACK
TRACK
91"
TRACK
91"
91"
91"
93"
91"
93"
93"
93"
93"
93"
93"
93"
93"
93"
97-1/2"
93"
97-1/2"
90-1/2"
97-1/2"
90-1/2"
86"
90-1/2"
86"
93"
86"
93"
93"
93"
95"
93"
95"
86"
95"
86"
86-1/2"
86"
86-1/2"
86"
86-1/2"
86"
93"
86"
93"
93"
93"
93"
93"
86"
93"
86"
93"
86"
93"
93"
93"
93"
93"
93"
93"
93"
SPRING
SPRING
CENTERS
SPRING
CENTERS
73"
CENTERS
73"
73"
73"
75"
73"
75"
75"
75"
76"
75"
76"
76"
76"
76"
76"
80-3/8"
76"
80-3/8"
73-3/8"
80-3/8"
73-3/8"
67"
73-3/8"
67"
75"
67"
75"
75"
75"
75"
75"
67"
75"
67"
73-3/8"
67"
73-3/8"
67"
73-3/8"
67"
75"
67"
75"
75"
75"
79"
75"
79"
67"
79"
67"
75"
67"
75"
76"
75"
76"
76"
76"
76-1/2"
76"
76-1/2"
76-1/2"
HUBS
HUBS
6HUBS
LUG
6
LUG
NONE
6
NONE
6 LUG
LUG
NONE
6
8 LUG
6
LUG
8
LUG
NONE
8
NONE
6 LUG
LUG
NONE
6
LUG
NONE
6
NONE
6 LUG
LUG
NONE
6 LUG
6 LUG
LUG
6
NONE
6
LUG
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
5 LUG
NONE
5
6 LUG
5 LUG
LUG
6
6
6
LUG
8 LUG
6
LUG
8 LUG
NONE
8
LUG
NONE
6 LUG
NONE
6 LUG
6 LUG
LUG
6
6
LUG
6
LUG
5
6 LUG
LUG
5
5
LUG
5 LUG
5 LUG
TYPE
TYPE
STRAIGHT
TYPE
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
STRAIGHT
"V"
STRAIGHT
"V"
"V"
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
STRAIGHT
"V"
"V"
TRACK
TRACK
86-1/2"
TRACK
86-1/2"
88"
86-1/2"
88"
89-1/2"
88"
89-1/2"
84"
89-1/2"
84"
84"
84"
84"
84"
84"
84"
86"
84"
86"
91"
86"
91"
91"
91"
93"
91"
93"
93"
SPRING
SPRING
CENTERS
SPRING
CENTERS
65-3/8"
CENTERS
65-3/8"
73-3/8"
65-3/8"
73-3/8"
68-3/8"
73-3/8"
68-3/8"
68"
68-3/8"
68"
67"
68"
67"
67"
67"
67"
67"
67"
67"
73"
67"
73"
73"
73"
75"
73"
75"
75"
HUBS
HUBS
5HUBS
LUG
5 LUG
5
5 LUG
LUG
NONE
5
LUG
NONE
5 LUG
NONE
5 LUG
5
5 LUG
LUG
NONE
5 LUG
NONE
NONE
NONE
NONE
NONE
5 LUG
NONE
5 LUG
5 LUG
LUG
5
5
LUG
5 LUG
5 LUG
14 14 14
2” X 3”
2” HEAVY
X 3” HEAVY
DUTYDUTY
SPRING
SPRING
AXLES
AXLES
(CONT.)
(CONT.)
PART PART
SPRINGSPRING
DESCRIPTION
DESCRIPTION
TYPE TYPE
TRACKTRACK
HUBS
NO.
CENTERS
NO.
CENTERS
2" XW/FLANGE
3" HD W/FLANGE
"V" 93"
93" 75"
75" NONE
PH4736PH4736
2" X 3" HD
"V"
2" XW/FLANGE
3" HD W/FLANGE
STRAIGHT
PH4750PH4750
2" X 3" HD
STRAIGHT
93-1/2" 93-1/2"
80-3/8" 80-3/8"5 LUG
2" XW/FLANGE
3" HD W/FLANGE
STRAIGHT
PH4751PH4751
2" X 3" HD
STRAIGHT
93-1/2" 93-1/2"
80-3/8" 80-3/8"NONE
2" XW/FLANGE
3" HD W/FLANGE
"V"93-1/2" 93-1/2"
PH4754PH4754
2" X 3" HD
"V"
73-3/8" 73-3/8"5 LUG
PH4754-1
2" XW/FLANGE
3" HD W/FLANGE
"V"93-1/2" 93-1/2"
PH4754-1
2" X 3" HD
"V"
80-3/8" 80-3/8"5 LUG
2" XW/FLANGE
3" HD W/FLANGE
"V" 95"
95" 76"
76" NONE
2" X 3" HD
"V"
PH4758PH4758
2" XW/FLANGE
3" HD W/FLANGE
"V" 93"
93" 76"
76" 5 LUG
PH4774PH4774
2" X 3" HD
"V"
2" XW/FLANGE
3" HD W/FLANGE
"V" 93"
93" 76-1/2" 76-1/2"5 LUG
PH4777PH4777
2" X 3" HD
"V"
2" XW/FLANGE
3" HD W/FLANGE
STRAIGHT
93" 75"
75" NONE
PH4990PH4990
2" X 3" HD
STRAIGHT
93"
2" XW/FLANGE
3" HD W/FLANGE
"V" 93"
93" 79"
79" 5 LUG
PH6018PH6018
2" X 3" HD
"V"
PH4106-1
2" XW/DISC
3" HD W/DISC
BRAKES
"V" 84"
84" 67"
67" 5 LUG
PH4106-1
2" X 3" HD
BRAKES
"V"
2" XW/12"
3" HDPREMIUM
W/12" PREMIUM
2" X 3" HD
DRUM DRUM
STRAIGHT
86" 67"
67" 6 LUG
PH4350PH4350
STRAIGHT
86"
BRAKES
BRAKES
HUBS
NONE
5 LUG
NONE
5 LUG
5 LUG
NONE
5 LUG
5 LUG
NONE
5 LUG
5 LUG
6 LUG
3” X 3”
3” TORSION
X 3” TORSION
AXLES
AXLES
PART PART
FRAMEFRAME
DESCRIPTION
DESCRIPTION
TYPE TYPE
HUBS
NO.
NO.
WIDTH WIDTH
STRAIGHT 68"
68" 5 LUG
STRAIGHT
PH1497PH14973" X 3" 3" X 3"
STRAIGHT
70-1/2"
STRAIGHT
70-1/2"
5 LUG
PH1499PH14993" X 3" 3" X 3"
STRAIGHT82-1/2" 82-1/2"5 LUG
STRAIGHT
PH150-130
PH150-130
3" X 3" 3" X 3"
STRAIGHT 69"
69" 5 LUG
STRAIGHT
PH1615PH16153" X 3" 3" X 3"
"V"
79" NONE
"V"
79"
3" X 3" WITHOUT
PH1380PH13803" X 3" WITHOUT
ARMS ARMS
"V"
"V"
80-1/2" 80-1/2"NONE
3" X 3" WITHOUT
ARMS ARMS
STRAIGHT67-1/2" 67-1/2"NONE
STRAIGHT
3" X 3" WITHOUT
ARMS ARMS
STRAIGHT 70"
70" NONE
STRAIGHT
3" X 3" WITHOUT
ARMS ARMS
STRAIGHT 70"
70" 5 LUG
STRAIGHT
PH1580-1
3" X 3"DISC
W/10"BRAKES
DISC BRAKES
PH1580-1
3" X 3" W/10"
STRAIGHT 79"
79" 5 LUG
STRAIGHT
PH1584-1
3" X 3"DISC
W/10"BRAKES
DISC BRAKES
PH1584-1
3" X 3" W/10"
STRAIGHT 69"
69" 5 LUG
STRAIGHT
PH1615-1
3" X 3"DISC
W/10"BRAKES
DISC BRAKES
PH1615-1
3" X 3" W/10"
STRAIGHT N/A
N/A NONE
3" X 3"CAPACITY
3500# CAPACITY
UP TO
95" TRACKSTRAIGHT
PH1600PH16003" X 3" 3500#
UP TO 95"
TRACK
HUBS
5 LUG
5 LUG
5 LUG
5 LUG
NONE
NONE
NONE
NONE
5 LUG
5 LUG
5 LUG
NONE
PH1556
PH1556
3” X 3”
3” HEAVY
X 3” HEAVY
DUTYDUTY
TORSION
TORSION
AXLES
AXLES
PART PART
DESCRIPTION
DESCRIPTION
NO.
NO.
3" X 3" HD
PH1556PH15563" X 3" HD
3" X 3" HD
PH1558PH15583" X 3" HD
3" X 3" HD
PH1560PH15603" X 3" HD
PH1560-1
3" X 3" HD
PH1560-1
3" X 3" HD
3" X 3" HD
PH1580PH15803" X 3" HD
3" X 3" HD
PH1582PH15823" X 3" HD
3" X 3" HD
PH1584PH15843" X 3" HD
3" X 3" HD
PH1585PH15853" X 3" HD
3" X 3" HD
PH1592PH15923" X 3" HD
PH1620-1
3" XWITHOUT
3" HD WITHOUT
PH1620-1
3" X 3" HD
ARMS ARMS
PH1556-1
3" XW/10"
3" HDDISC
W/10"BRAKES
DISC BRAKES
PH1556-1
3" X 3" HD
PH1560-2
3" XW/10"
3" HDDISC
W/10"BRAKES
DISC BRAKES
PH1560-2
3" X 3" HD
FRAMEFRAME
HUBS
WIDTH WIDTH
"V"
70" 5 LUG
"V"
70"
"V"
76" 5 LUG
"V"
76"
"V"
79" 5 LUG
"V"
79"
"V"
79" NONE
"V"
79"
STRAIGHT 70"
70" 5 LUG
STRAIGHT
STRAIGHT 76"
76" 5 LUG
STRAIGHT
STRAIGHT 79"
79" 5 LUG
STRAIGHT
STRAIGHT 86"
86" 5 LUG
STRAIGHT
"V"
"V"
80-1/2" 80-1/2"5 LUG
STRAIGHT76-3/8" 76-3/8"NONE
STRAIGHT
"V"
70" 5 LUG
"V"
70"
"V"
79" 5 LUG
"V"
79"
TYPE TYPE
HUBS
5 LUG
5 LUG
5 LUG
NONE
5 LUG
5 LUG
5 LUG
5 LUG
5 LUG
NONE
5 LUG
5 LUG
15
1515
15
PH1589
PH1589
PH1589
3-1/2”
3-1/2”X
3-1/2”
X3-1/2”
3-1/2”
X TORSION
3-1/2”
TORSION
TORSION
AXLES
AXLES
AXLES
PART
PART PART
DESCRIPTION
DESCRIPTION
DESCRIPTION
NO.
NO.
NO.
3-1/2"
PH1561
PH1561PH1561
3-1/2"
3-1/2"X X3-1/2"
3-1/2"X 3-1/2"
3-1/2"
PH1566
PH1566PH1566
3-1/2"
3-1/2"X X3-1/2"
3-1/2"X 3-1/2"
3-1/2"
PH1589
PH1589PH1589
3-1/2"
3-1/2"X X3-1/2"
3-1/2"X 3-1/2"
3-1/2"
PH1590
PH1590PH1590
3-1/2"
3-1/2"X X3-1/2"
3-1/2"X 3-1/2"
PH1566-3
3-1/2"
XWITHOUT
3-1/2" WITHOUT
PH1566-3
PH1566-3
3-1/2"
3-1/2"X X3-1/2"
3-1/2"WITHOUT
ARMS
ARMS ARMS
PH1597-1
3-1/2"
XWITHOUT
3-1/2" WITHOUT
PH1597-1
PH1597-1
3-1/2"
3-1/2"X X3-1/2"
3-1/2"WITHOUT
ARMS
ARMS ARMS
3-1/2"
XWITHOUT
3-1/2" WITHOUT
PH1740
PH1740PH1740
3-1/2"
3-1/2"X X3-1/2"
3-1/2"WITHOUT
ARMS
ARMS ARMS
PH1566-1
3-1/2"
XW/12"
3-1/2"
W/12"
DISC BRAKES
PH1566-1
PH1566-1
3-1/2"
3-1/2"X X3-1/2"
3-1/2"W/12"
DISC
DISC
BRAKES
BRAKES
FRAME
FRAME FRAME
TYPE
TYPE TYPE
HUBS
HUBS
WIDTH
WIDTH WIDTH
"V" 71"
71"6 6LUG
"V"
"V"
71"
LUG
"V" 79"
79"6 6LUG
"V"
"V"
79"
LUG
STRAIGHT
STRAIGHT
STRAIGHT
76-1/2"
76-1/2" 76-1/2"
6 6LUG
LUG
STRAIGHT79"
79"6 6LUG
STRAIGHT
STRAIGHT
79"
LUG
"V" 96"
96"NONE
"V"
"V"
96"
NONE
"V" 85"
85"NONE
"V"
"V"
85"
NONE
STRAIGHT
STRAIGHT
STRAIGHT
76-1/2"
76-1/2" 76-1/2"
NONE
NONE
"V" 79"
79"6 6LUG
"V"
"V"
79"
LUG
HUBS
6 LUG
6 LUG
6 LUG
6 LUG
NONE
NONE
NONE
6 LUG
PH1512
PH1512
PH1512
4”
4”XX4”
4”
4”
TORSION
TORSION
X 4” TORSION
AXLES
AXLES
AXLES
PART
PART PART
FRAME
FRAME FRAME
DESCRIPTION
DESCRIPTION
DESCRIPTION
TYPE
TYPE TYPE
HUBS
HUBS
NO.
NO.
NO.
WIDTH
WIDTH WIDTH
STRAIGHT
STRAIGHT
STRAIGHT
70-1/2"
70-1/2" 70-1/2"
NONE
NONE
PH150-23
PH150-23
PH150-23
4"4"X X4"4" 4" X 4"
STRAIGHT72"
72"
STRAIGHT
STRAIGHT
72"
NONE
NONE
PH150-24
PH150-24
PH150-24
4"4"X X4"4" 4" X 4"
STRAIGHT81"
81"
STRAIGHT
STRAIGHT
81"
NONE
NONE
PH150-27
PH150-27
PH150-27
4"4"X X4"4" 4" X 4"
STRAIGHT81"
81"
STRAIGHT
STRAIGHT
81"
NONE
NONE
PH150-36
PH150-36
PH150-36
4"4"X X4"4" 4" X 4"
STRAIGHT
70-1/2"
STRAIGHT
STRAIGHT
70-1/2"
70-1/2"
6
6
LUG
LUG
PH1505
PH1505PH1505
4"4"X X4"4" 4" X 4"
STRAIGHT
STRAIGHT
STRAIGHT
70-1/2"
70-1/2" 70-1/2"
8 8LUG
LUG
PH1506
PH1506PH1506
4"4"X X4"4" 4" X 4"
STRAIGHT81"
81"
STRAIGHT
STRAIGHT
81"
6 6LUG
LUG
PH1512
PH1512PH1512
4"4"X X4"4" 4" X 4"
STRAIGHT81"
81"
STRAIGHT
STRAIGHT
81"
8 8LUG
LUG
PH1513
PH1513PH1513
4"4"X X4"4" 4" X 4"
STRAIGHT
STRAIGHT
STRAIGHT
78-1/2"
78-1/2" 78-1/2"
6 6LUG
LUG
PH1519
PH1519PH1519
4"4"X X4"4" 4" X 4"
STRAIGHT71"
71"
STRAIGHT
STRAIGHT
71"
6 6LUG
LUG
PH1520
PH1520PH1520
4"4"X X4"4" 4" X 4"
STRAIGHT
N/A
STRAIGHT
STRAIGHT
N/A
N/A
NONE
NONE
PH1605-1
4" X CAPACITY
4"CAPACITY
5200# CAPACITY
UP
TO 95" TRACK
PH1605-1
PH1605-1
4"4"X X4"4"5200#
5200#
UP
UPTO
TO95"
95"
TRACK
TRACK
STRAIGHTN/A
N/A
STRAIGHT
N/A
NONE
NONE
4" X CAPACITY
4"CAPACITY
5200# CAPACITY
UP
TO 98" TRACKSTRAIGHT
PH1605
PH1605PH1605
4"4"X X4"4"5200#
5200#
UP
UPTO
TO98"
98"
TRACK
TRACK
STRAIGHTN/A
N/A
STRAIGHT
N/A
NONE
NONE
4" X CAPACITY
4"CAPACITY
7000# CAPACITY
UP
TO 98" TRACKSTRAIGHT
PH1610
PH1610PH1610
4"4"X X4"4"7000#
7000#
UP
UPTO
TO98"
98"
TRACK
TRACK
HUB
HUBCONVERSION
CONVERSION
HUB CONVERSION
KITS
KITS KITS
DESCRIPTION
DESCRIPTION
DESCRIPTION
PART
PART PART
NO.
NO.
NO.
1-1/16”
NON
UFP
HUB
PH2145
PH2145PH2145
1-1/16”
1-1/16”NON
NON
UFP
UFP
HUB
HUB
TO
TOUFP
UFPTO UFP
1-3/8”
NON
UFP
HUB
PH2150
PH2150PH2150
1-3/8”
1-3/8”NON
NON
UFP
UFP
HUB
HUB
TO
TOUFP
UFPTO UFP
HUBS
NONE
NONE
NONE
NONE
6 LUG
8 LUG
6 LUG
8 LUG
6 LUG
6 LUG
NONE
NONE
NONE
16 16
TORSION ARMS
PART
NO.
PH1325
PH1330
PH150-40
PH150-42
PH150-43
DESCRIPTION
TORSION ARM/SPINDLE 3" X 3" (UFP)
TORSION ARM/SPINDLE 3-1/2" (UFP)
FA-35 ARM+SPINDLE 3500# (UCF)
ARM+SPINDLE 5200/7000# L/H (UCF)
ARM+SPINDLE 5200/7000# R/H (UCF)
TORSION AXLE COMPONENTS
PART
NO.
PH150-54
PH150-62
PH150-72
PH2050
PH2104
PH2105
PH2106
PH1325
DESCRIPTION
FC-70E CARTRIDGE 7000# (UCF)
5200/7000# TORSION AXLE BUSHING (UCF)
FK70 MOUNTING BRACKET 5200/7000# (UCF)
AXLE WASHER 3/4"
AXLE SPRING TAB 3" X 2" (UFP)
TANG WASHER
AXLE SPRING TAB 2" X 1-1/2" (UFP)
1-1/16” UFP SPINDLES
PART
NO.
PH1752
PH1800
PH1803
DESCRIPTION
CAPACITY
TURNED DOWN
WITH RING WELD MOUNT
POSI LUBE
1500 LBS.
2500 LBS.
2500 LBS.
PH2104
1-3/8” X 1-1/16” UFP SPINDLES
PART
NO.
PH1849
PH1855
DESCRIPTION
CAPACITY
WITH 10" BRAKE FLANGE
STANDARD
3500 LBS.
3500 LBS.
1-3/4” X 1-1/4” UFP SPINDLES
PART
NO.
PH1900
PH1903
PH1905
PH1906
DESCRIPTION
CAPACITY
STANDARD
POSI-LUBE
WITH FLANGE
POSI-LUBE WITH FLANGE
PH1855
5200/7000
5200/7000
5200/7000
5200/7000
PH1803
PH1905
PH1803
17
1717
SPINDLE COMPONENTS
PART
SPINDLE
COMPONENTS
DESCRIPTION
NO.
PART
PHNO.
1950
P
H
1
PH19
98
50
0
PH2000
PH1980
P
H2012
PH2000
PH2060
P
H2012
P
H2065
PH2060
P
PH
H2
20
06
66
5
PH2070
PH2066
P
H2105
PH2070
P
H2
21
10
05
8
PH
PH2108
SIZE
SPINDLE NDESCRIPTION
UT
S
P
I
N
D
L
E
N
U
SPINDLE NUT
T
SPINDLE
NUT
SPINDLE N
UT
C
OTTER PNUT
IN
SPINDLE
AXLE
WASHER
C
OTTE
R PIN
3
/
4
"
A
X
LE D WASHER
AXLE WASHER
3
3//4
4"" A
AX
XL
LE
ED
DW
WA
AS
SH
HE
ER
R
1"
AXLE
D
WASHER
(TORSION)
3/4" AXLE D WASHER
T
A
N
G
W
A
S
H
E
R
1" AXLE D WASHER (TORSION)
SA
PN
INGDL
RETAINER
T
WEAN
SU
HT
ER
3SIZE
/4" ID
1-33//41"6I"DID
1-31"
/16ID" ID
1/8"1"
X ID
1-1/4"
1/8" X1"1-1/4"
3/1"
32"
3
/
3/1
36
2""
3N/A
/16"
N
/A
N/A
N
A
N//A
SPINDLE NUT RETAINER
PI0512
PI0512
N/A
PI1054
PI1054
PI – FENDERS
PI – FENDERS
PLASTIC FENDERS WITH STEPS
PART
TIRE
PLASTIC
FENDERS
WITH
WIDTH STEPS
LENGTH
NO.
PART
PI0510
NO.
PI0512
PI0510
PI0512
FINISH
SIZE
TIRE
13"
SIZE
14"
13"
WIDTH
9"
9.7"
9"
LENGTH
29"
31"
29"
FINISH
WHITE
WHITE
WHITE
14"
9.7"
31"
WHITE
GALVANIZED FENDERS FOR SINGLE AXLE TRAILERS
PART
TIRE TRAILERS
GALVANIZED
FENDERS
FOR SINGLE AXLE
DESCRIPTION
WIDTH
LENGTH
NO.
SIZE
PART
PINO.
1000
PI1003
PI1000
PI1005
PI1003
PI1025
PI1005
PII1
10
42
65
0
P
P
I
1
5
1
0
PI1460
P
15
51
10
5
PII1
PI1631
PI1515
PI1662
PI1631
PI1753
PI1662
PI1753
STANDARD DESCRIPTION
PUNCHED
STANDARDFOR 12" TIRE
WITH
BRACKET
FOR
8" & 12" TYPE A
PUNCHED
FOR 12"
TIRE
1/2 ROBRACKET
UND
WITH
FOR 8" & 12" TYPE A
S
T
A
N
D
RD
D
1/2 ROUAN
S
ST
TA
AN
ND
DA
AR
RD
D
S
T
A
N
D
A
R
D
STANDARD
CUSTOM
STANDARSQUAREBACK
D
CUSTOM
SQUAREBACK
CUSTOM SQUAREBACK
FOR PONTOON
TRAILERS
CUSTOM
SQUAREBACK
FOR PONTOON TRAILERS
TIRE
8”
SIZE
8”
8”
8" &
8”12"
"
8" 1&212"
1
3
12""
1
14
3""
1
15
4""
13"
15"
14"
13"
13"
14"
13"
WIDTH
7”
7”
7”
7"
7”
5-7"
1/2"
7
1//2
4""
5-1
8
1
/
2"
7-1/4"
8-9
1"/2"
9"
9"
9"
9"
9"
9"
9"
LENGTH
21”
21”
21”
21"
21”
2
4"
21"
272-4
1"/2"
29-1/2"
27-1/2"
32"
29-1/2"
32"
3
2"
32"
32"
27"
32"
27"
ALUMINUM FENDERS FOR SINGLE AXLE TRAILERS
PART
TIRE
ALUMINUM
FENDERS
FOR SINGLE AXLE
TRAILERS
DESCRIPTION
WIDTH LENGTH
NO.
SIZE
PART
PINO.
1751
P
PII1
17
75
52
1
P
I
1
8
02
5
PI175
P
I
1
8
1
1
PI1805
PI1811
TIRE
13"
SIZE
1
13
3""
1
4""
13
1
5
14""
15"
STANDARD DESCRIPTION
S
ST
TA
AN
ND
DA
AR
RD
D
S
T
A
N
D
A
RD
D
STANDAR
S
T
A
N
D
A
R
D
STANDARD
STANDARD
WIDTH
7-1/2"
7-9
1"/2"
9
9""
9
9""
9"
LENGTH
29"
2
29
9""
312-9
1"/2"
3
3
31-1"/2"
33"
GALVANIZED FENDERS FOR TANDEM AXLE TRAILERS
PART
TIRE
GALVANIZED
FENDERS FOR TANDEM
AXLE
TRAILERS
DESCRIPTION
WIDTH
LENGTH
NO.
PART
PI1250
NO.
PI1560
PI1250
PI1570
PI1560
PI1715
PI1570
PI1715
DESCRIPTION
STANDARD
TEARDROP
STANDARD
TEARDROP
TEARDROP
TEARDROP
TEARDROP
TEARDROP
SIZE
TIRE
13"SIZE
& 14"
13"13"
& 14"
14"
13"
15"
14"
15"
WIDTH
9"
7-1/2"
9"
8-1/2"
7-1/2"
9-1/2"
8-1/2"
9-1/2"
LENGTH
60"
56-1/4"
60"
64"
56-1/4"
67"
64"
67"
WRAP
WRAP
24”
24”
24”
24"
24”
3
2"
24"
37"
32"
40-3/4"
37"
5
0"
40-3/4"
43"
50"
45"
43"
38"
45"
38"
PI1752
PI1752
PI1790
PI1790
WRAP
WRAP
43"
4
43
3""
4
8""
43
5
4
48""
54"
WRAP
WRAP
72"
65"
72"
74"
65"
87"
74"
87"
PI1250
PI1250
1818
ALUMINUM FENDERS FOR TANDEM AXLE TRAILERS
PART
NO.
PI1855
PI1857
PI1905
PI1906
PI1909
PI1910
TIRE
SIZE
13"
13"
14"
14"
14"
16"
DESCRIPTION
STANDARD
TEARDROP
STANDARD
TEARDROP
NARROW TEARDROP
FENDER, TEARDROP
WIDTH
LENGTH
9"
9"
10"
10"
9"
12"
60"
60"
68"
68"
68"
72"
ALUMINUM FENDERS FOR TRIPLE AXLE TRAILERS
PART
NO.
PI1954
PI1956
TIRE
SIZE
16"
14" & 15"
WIDTH
LENGTH
12"
10"
112"
102"
WRAP
79"
77"
89"
91"
87"
97"
WRAP
PI1570
137"
127"
GALVANIZED FENDER BRACKETS
PART
NO.
PI0100
DESCRIPTION
SINGLE FOR 10" & 12" TIRES
ALUMINUM FENDER BRACKETS
LENGTH
PART
NO.
PI2018
PI2020
PI2025
PI2030
PI0100
27"
24"
22"
20"
ALUMINUM FENDER BRACES
PART
NO.
PI2065
DESCRIPTION
(FOR AIRBOAT) 3" X 4" X 3"
PI2030
FENDER PAD FOR ALUMINUM FENDERS
PART
NO.
DESCRIPTION
MATERIAL
TIRE
SIZE
COLOR
PI1960
PI1970
PI1972
PI1980
PI1990
PI1991
SINGLE
SINGLE
SINGLE
TANDEM
TANDEM
TANDEM
CARPETED
CARPETED
UHMW
CARPETED
CARPETED
UHMW
13"
14"
14"
13"
14"
14"
BLK/GRY
BLK/GRY
BLACK
BLK/GRY
BLK/GRY
BLACK
FENDER PAD FOR GALVANIZED FENDERS
PART
NO.
DESCRIPTION
MATERIAL
TIRE
SIZE
PI2130
PI2160
SINGLE
SINGLE
CARPETED
CARPETED
13"
14"
COLOR
BLACK
BLACK
PI2130
19 19
STEP PADS FOR ADJUSTABLE UNDERCARRIAGES
PART
NO.
PI1996
FINISH
LENGTH
10"
ALUM.
**PLEASE SPECIFY LEFT-FRONT, LEFT-REAR, RIGHT-FRONT OR RIGHT-REAR
WHEN ORDERING STEP PADS! HOLES ARE PRE-DRILLED FOR FENDER MOUNTING,
BUT HOLES FOR FRAME MOUNTING WILL NEED TO BE DONE BY DEALER. PLEASE SPECIFY IF
YOU WOULD THE HOLES DRILLED ON THE FLAT SIDE OR THE CURVED SIDE. IF NEITHER
SIDE IS SPECIFIED, NO HOLES WILL BE DRILLED
STEP PADS WITH BOOTS
PART
NO.
PI1996-1
PI1997
PI2000
PI2001
PI2002
PI2003
FINISH
LENGTH
10"
11"
12"
14"
14-1/2"
15"
PI2006
ALUM.
ALUM.
ALUM.
ALUM.
ALUM.
ALUM.
**PLEASE SPECIFY LEFT-FRONT, LEFT-REAR, RIGHT-FRONT OR RIGHT-REAR WHEN
ORDERING STEP PADS! HOLES ARE PRE-DRILLED FOR FENDER MOUNTING, BUT
HOLES FOR FRAME MOUNTING WILL NEED TO BE DONE BY DEALER. PLEASE SPECIFY IF
ALUMINUM STEP PADS
PART
NO.
PI2006
PI2008
PI2009
PI2014
PI2016
PI1997
LENGTH
14"
15"
15-1/2"
17”
12-1/2"
ORDERING STEP PADS! HOLES ARE PRE-DRILLED FOR FENDER MOUNTING, BUT
HOLES FOR FRAME MOUNTING WILL NEED TO BE DONE BY DEALER. PLEASE SPECIFY IF
STEP PAD BOOTS
PART
NO.
PI2100
PI2110
FINISH
DESCRIPTION
L/H (B)
R/H (A)
PI2003
BLACK
BLACK
ORDERING STEP PAD BOOTS! PLEASE SPECIFY IF YOU WOULD THE HOLES DRILLED ON
THE FLAT SIDE OR THE CURVED SIDE. IF NEITHER SIDE IS SPECIFIED, NO HOLES WILL BE
DRILLED.
PI2009
PI2110
20
20
PJ – SPRINGS
SINGLE EYE SPRINGS
PART
NO.
PJ1000
PJ1050
PJ1055
PJ1100
PJ1150
PJ1200
PJ1250
LENGTH
WIDTH
LEAF
CAPACITY
24"
24"
24"
30"
30"
30"
30"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1
3
4
2
3
4
5
280 LBS
750 LBS
1000 LBS
950 LBS
1500 LBS
2000 LBS
2400 LBS
PJ1050
DOUBLE EYE SPRINGS
PART
NO.
PJ1350
PJ1370
PJ1400
PJ1450
PJ1500
PJ1700
LENGTH
WIDTH
LEAF
CAPACITY
20"
25-1/4"
25-1/4"
25-1/4"
25-1/4"
25-1/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
3
3
3
4
5
6
1500 LBS
1500 LBS
2000 LBS
2500 LBS
2950 LBS
3500 LBS.
PJ1500
PK – UNDERCARRIAGE HARDWARE
AXLE MOUNTING KITS
PART
NO.
PK1000
PK1050
PK1100
PK1150
PK1150-SS
PK1152
PK1153
DESCRIPTION
STANDARD KIT - 1-1/2"SQ TUBE AXLE
HEAVY DUTY KIT - TUBE AXLE
HEAVY DUTY KIT – DOUBLE EYE SPRINGS
FOR A SINGLE AXLE TRAILER
HEAVY DUTY KIT – 2X2 TANDEM AXLE
HEAVY DUTY KIT – 2X2 TANDEM AXLE, STAINLESS STEEL
HEAVY DUTY KIT – 2X3 TANDEM AXLE
HEAVY DUTY KIT – 2X3 TRIPLE AXLE
PJ1370
PK1000 KITS INCLUDE:
(2) 3 - HOLE PLATES
(2) PLATED LOCK NUTS 1/2"-13
(4) HEX NUTS 1/2"-13 GALV.
(4) WASHER FLAT USS 1/2 HDG
(4) WASHER LOCK 1/2 HDG
(2) U-BOLTS 1/2"X2-3/4”X4”
(2) 5 - HOLE PLATES
(4) U-BOLTS 1/2"X2-1/16”X5-13/16”
(4) 5 - HOLE PLATES
(8) 2 - HOLE SHACKLE PLATE
(2) PLATED BOLTS 1/2"X4” GRADE 5
(8) U-BOLTS 1/2"X2-1/16”X6-13/16”
(2) 5 - HOLE PLATES
(2) ALUM.SPACER D-EYE SPRING 1-3/4"
(4) U-BOLTS 1/2"X2-1/16”X5-13/16”
(4) 5 - HOLE PLATES
(8) U-BOLTS 1/2"X2-1/16”X5-13/16”
(6) 5 - HOLE PLATES
(12) U-BOLTS 1/2"X2-1/16”X6-13/16”
21
21 21
GALVANIZED SPRING HANGERS
GALVANIZED
SPRING HANGERS
PART
NO.
PART
NO.
PK1701
PK1701
PK1702
PK1702
PK1703
PK1703
PK1731
PK1731
DESCRIPTION
DESCRIPTION
ML SPRING HANGER, FORMED 1 PC
ML SPRING HANGER, FORMED
1 PC
2PC H.D. 1/2
HOLES
ML SPRING HANGER, 2PC H.D. 1/2
3/8 HOLES
ML SPRING
HANGER,
2PC H.D. 3/8 HOLES
SLIPPER
SPRING
HANGER
SLIPPER SPRING HANGER
GALVANIZED PLATES
GALVANIZED
PLATES
PART
NO.
PART
NO.
PK1200
PK1200
PK1205
PK1205
PK1250
PK1250
PK1300
PK1300
PK1320
PK1320
PK1701
PK1701
DESCRIPTION
DESCRIPTION
3 - HOLE PLATE
PLATEPLATE
3 - HOLE BUNK
3
HOLE
BUNK
5
PLATEPLATE
5 - HOLE SHACKLE
PLATE
2
PLATE
2
PLATE
1 - HOLE SHACKLE
SLOT PLATE
1 - HOLE SLOT PLATE
PK1702
PK1702
GALVANIZED UNDERCARRIAGE COMPONENTS
GALVANIZED
UNDERCARRIAGE COMPONENTS
PART
NO.
PART
NO.
PK1450
PK1450
PK1558
PK1558
PK1800
PK1800
PK1810
PK1810
PK1850
PK1850
PK1950
PK1950
PK2000
PK2000
DESCRIPTION
DESCRIPTION
BOLT 1/2 X 3-1/2 WITH LOCK NUT
BOLT 1/2 X 3-1/2
WITH LOCK NUT
EQUALIZER
BUSHING
EQUALIZER BUSHING
PLATE, BOLT-ON 5-3/4
5-3/4
EQUALIZER PLATE, BOLT-ON 4-1/2
EQUALIZER
BOLT-ON
4-1/2
SPRING
SLIPPLATE,
COLLAR,
WELD-ON
RAW
SPRING
SLIP
COLLAR,
WELD-ON
RAW
6-1/2" EQUALIZER
6-1/2"
EQUALIZER
8" EQUALIZER
8" EQUALIZER
PK1200
PK1200
PK1300
PK1300
GALVANIZED BOLT-ON STEPS
GALVANIZED
BOLT-ON STEPS
PART
STEP
NO.
PART
NO.
PK2043
PK2043
PK2045
PK2045
SIZE
STEP
SIZE
8"
8"
12"
12"
PK1320
PK1320
UNDERCARRIAGE ANGLES FOR SINGLE AXLE
UNDERCARRIAGE
ANGLES FOR SINGLE AXLE
PART
NO.
PART
NO.
PK2250
PK2250
PK2252
PK2252
PK2262
PK2262
SIZE
SIZE
38"
38" (WELDED LOW)
38" (WELDED LOW)
38" (WELDED LOW)
FITS
FITS
10/12" TIRE
10/12" TIRE
8/10/12"TIRE
8/10/12"TIRE
8/10/12"TIRE
SIDE
SIDE
LEFT
LEFT
LEFT
RIGHT
RIGHT
UNDERCARRIAGE ANGLES FOR SINGLE AXLE
UNDERCARRIAGE
ANGLES FOR SINGLE
AXLE
PART
STEP
NO.
PART
NO.
PK2350
PK2350
PK2360
PK2360
PK2400
PK2400
PK2410
PK2410
PK2450
PK2450
PK2460
PK2460
PK2500
PK2500
PK2510
PK2510
PK2513
PK2513
SIZE
SIZE
38"
38"
38"
38"
38"
38"
38"
38"
38"
38”
38”
FITS
FITS
13" TIRE
13" TIRE
13" TIRE
13" TIRE
13" TIRE
14"
14" TIRE
14" TIRE
14" TIRE
14"
14” TIRE
14” TIRE
SIZE
STEP
SIZE
8"
8"
8"
12"
12"
12"
8"
8"
8"
12"
12"
12"
N/A
N/A
SIDE
SIDE
LEFT
LEFT
RIGHT
RIGHT
LEFT
LEFT
RIGHT
RIGHT
LEFT
LEFT
RIGHT
RIGHT
LEFT
LEFT
RIGHT
RIGHT
N/A
N/A
PK1800
PK1800
PK1250
PK1250
22
2222
UNDERCARRIAGE
UNDERCARRIAGE
ANGLES
ANGLESFOR
FORSINGLE
SINGLEAXLE
AXLE
PART
PART
SIZE
SIZE
NO.
NO.
PK2730 CUSTOM
CUSTOM
PK2730
PK2740
PK2740 CUSTOM
CUSTOM
STEP
STEP
SIZE
SIZE
TIRE CUSTOM
CUSTOM
14"14"
TIRE
14"14"
TIRE
TIRE CUSTOM
CUSTOM
FITS
FITS
SIDE
SIDE
RIGHT
RIGHT
LEFT
LEFT
UNDERCARRIAGE
UNDERCARRIAGE
ANGLES
ANGLESFOR
FORTANDEM
TANDEMAXLE
AXLE
PART
PART
NO.
NO.
PK2550
PK2550
PK2600
PK2600
PK2650
PK2650
PK2655
PK2655
PK2690
PK2690
PK2700
PK2700
PK2705
PK2705
SIZE
SIZE
63.5"
†† ††
63.5"
63.5"
63.5"
63.5"
63.5"
71”71”
71"71"
71"71"
78"78"
††FOR
††FOR
20"20"
DOUBLE
DOUBLE
EYE
EYE
SPRING
SPRING
FITS
FITS
10/12"
10/12"
TIRE
TIRE
13"13"
TIRE
TIRE
13"13"
TIRE
TIRE
14”14”
TIRE
TIRE
14"14"
TIRE
TIRE
14"14"
TIRE
TIRE
15"15"
TIRE
TIRE
STEP
STEP
SIZE
SIZE
NONE
NONE
8" 8"
12"12"
N/A
N/A
8" 8"
12"12"
12"12"
SIDE
SIDE
LH/RH
LH/RH
LH/RH
LH/RH
LH/RH
LH/RH
N/A
N/A
LH/RH
LH/RH
LH/RH
LH/RH
LH/RH
LH/RH
PK2690
PK2690
UNDERCARRIAGE
UNDERCARRIAGE
ANGLES
ANGLESFOR
FORTRIPLE
TRIPLEAXLE
AXLE
PART
PART
SIZE
SIZE
NO.
NO.
PK2770 112"
112"
PK2770
FITS
FITS
14/15"
TIRE
14/15"
TIRE
STEP
STEP
SIZE
SIZE
12"12"
SIDE
SIDE
LH/RH
LH/RH
PK2321
PK2321
PL
PL– –LIGHTING
LIGHTING
STANDARD
STANDARDLIGHTING
LIGHTING
PART
PART
NO.
NO.
PL0500
PL0500
PL0505
PL0505
PL1065
PL1065
PL1070
PL1070
PL1080
PL1080
PL1100
PL1100
PL1150
PL1150
PL2602
PL2602
DESCRIPTION
DESCRIPTION
AMBER
CLEARANCE/SIDE
MARKER
WITH
LEAD&
PLUG
AMBER
CLEARANCE/SIDE
MARKER
WITH
48"48"
LEAD&
PLUG
AMBER
REPLACEMENT
LENS
AMBER
REPLACEMENT
LENS
AMBER
CLEARANCE/MARKER
LIGHT
AMBER
CLEARANCE/MARKER
LIGHT
RECTANGULAR
COMBINATION
TAIL
LIGHT
- RH
RECTANGULAR
COMBINATION
TAIL
LIGHT
- RH
RECTANGULAR
COMBINATION
TAIL
LIGHT
- LH
RECTANGULAR
COMBINATION
TAIL
LIGHT
- LH
SQUARE
WATERPROOF
TAIL
LIGHT
SQUARE
WATERPROOF
TAIL
LIGHT- LH
- LH
SQUARE
WATERPROOF
TAIL
LIGHT
SQUARE
WATERPROOF
TAIL
LIGHT- RH
- RH
RED
3-LIGHT
BAR
RED
3-LIGHT
BAR
PL1080
PL1080
LED
LEDLIGHTING
LIGHTING
PART
PART
NO.
NO.
PL1180
PL1180
PL1182
PL1182
PL1184
PL1184
PL1186
PL1186
DESCRIPTION
DESCRIPTION
WATERPROOF
TAIL
LIGHT
- R/H
WATERPROOF
TAIL
LIGHT
- R/H
WATERPROOF
TAIL
LIGHT
- L/H
WATERPROOF
TAIL
LIGHT
- L/H
AMBER
CLEARANCE/MARKER
LIGHT
AMBER
CLEARANCE/MARKER
LIGHT
SEALED
3-PIECE
LIGHT
BAR
(RED)
SEALED
3-PIECE
LIGHT
BAR
(RED)
PL1180
PL1180
REFLECTORS
REFLECTORS
PART
PART
NO.
NO.
RED
STICK-ON
STICK-ON
PL1442 RED
PL1442
DESCRIPTION
DESCRIPTION
PL1186
PL1186
23 23
WIRE HARNESSES
PART
NO.
PL2090
PL2100
PL2110
PL2120
PL2128
PL2130
PL2140
SIZE
17'
20'
25'
28'
32' - 5 WAY
33'
40'
ELECTRICAL COMPONENTS
PART
NO.
PL2240
PL2311
PL2450
PL2128
DESCRIPTION
LEAD WIRE - 6'
INSULATED BUTT CONN. 14-16GA, HEAT SHRINK
CHASSIS WIRE CLIP - SMALL
TRAILER LIGHT & WIRE KITS
PART
NO.
PL2700
PL2751
PL9060-1
DESCRIPTION
TRAILER LIGHTING & WIRING KIT
LED KIT FOR TRAILERS UNDER 80" WIDE
ALUMINUM TRAILER CLEARANCE/MARKER LED KIT
PL2700 KITS INCLUDE:
(1) SQUARE WP T/L LH
(1) SQUARE WP T/L RH
(2) AMB. CLEARANCE LIGHT – SQ
(1) WIRE HARNESS 25'
(4) INSULATED BUTT CONN 14-16GA
BLUE
(1) LICENSE TAG BRACKET
(10) PLASTIC TIE 8" - TREE MOUNT
PL2751 KITS INCLUDE:
(1) LED WP TAILLIGHT RH
(1) LED WP TAILLIGHT LH
(2) LED AMBER CLEARANCE/MARKER
LIGHT
(1) WIRE HARNESS 28'
(4) INSULATED BUTT CONN 14-16GA BLUE
(1) LICENSE TAG BRACKET
(10) PLASTIC TIE 8" - TREE MOUNT
PL2311
PL9060-1 KITS INCLUDE:
(2) LED AMBER
CLEARANCE/MARKER LIGHT
(1) LEAD WIRE - 3'
(4) INSULATED BUTT CONN 14-16GA
BLUE
(4) SMALL CHASSIS WIRE CLIPS
ALUMINUM TAIL LIGHT BRACKETS
PART
NO.
PL2870
PL2875
DESCRIPTION
TREADBRIGHT TAIL LIGHT COVER 3/16"- R/H
TREADBRIGHT TAIL LIGHT COVER 3/16"- L/H
PL2870
GALVANIZED TAIL LIGHT BRACKETS
PART
NO.
PL2790
PL2800
DESCRIPTION
TAIL LIGHT BRACKET - BOLT-ON "L" WITH HOOK
BOLT-ON LIGHT BRACKET CB
OTHER LIGHTING RELATED COMPONENTS
PART
NO.
PL2550
DESCRIPTION
LICENSE TAG BRACKET
PL2790
24 24
FASTENERS
PART
NO.
PL2458
PL2944
PL2954
SIZE
SMALL CHASIS WIRE CLIP
8" - TREE MOUNT
14-1/2" – HEAVY DUTY
PM – WINCHES
SINGLE SPEED WINCHES
PART
NO.
PM1275
PM1445
DESCRIPTION
CAPACITY
WITH STRAP
WITH YELLOW STRAP
PM1275
1800 LBS.
3200 LBS.
TWO SPEED WINCHES
PART
NO.
PM1355
PM1415
PM1455
DESCRIPTION
CAPACITY
WITH STRAP
WITH STRAP
WITH BRAKE
2000 LBS.
2500 LBS.
3500 LBS.
PN – WINCH STRAPS
PM1415
WINCH STRAPS
PART
NO.
PN1353
PN1390
NOTES
YELLOW
YELLOW
LENGTH
WIDTH
CAPACITY
20'
20'
2"
3"
10,000 LBS.
10,000 LBS.
PO – WINCH POSTS
PN1353
3” X 3” WINCH POST BASES FOR 3” TONGUES
PART
NO.
PO1470
PO1485
PO1497
DESCRIPTION
HEAVY DUTY
HEAVY DUTY (4HOLE) 6000#
DOUBLE BASE, HEAVY DUTY
HEIGHT
36"
30"
36"
3” X 3” WINCH POST BASE ASSEMBLIES FOR 3” TONGUES
PART
NO.
PO1510
PO1533
DESCRIPTION
HEAVY DUTY
HEAVY DUTY - SINGLE
HEIGHT
30"
24"
PO1485
25 25
CUSTOM WINCH POSTS
PART
NO.
PO1910
PO1930
PO1940
DESCRIPTION
WINCH POST TOP CUSTOM 10"
WINCH POST - BOW STOP AIRBOAT (LOW STYLE)
WINCH POST BOTTOM CUSTOM 10"
WINCH SEAT/POST ASSEMBLIES
PART
NO.
PO1932
PO1935
DESCRIPTION
WINCH SEAT ASSEMBLY AIRBOAT 15"
WINCH POST ASSEMBLY (BOW STOP) AIRBOAT, LOW
STYLE
PO1940
BOW STOP COMPONENTS FOR CAROLINA SKIFF
PART
NO.
PO1745
DESCRIPTION
BOW STOP ASSEMBLY - TJ WHEELS
BOW REST ASSEMBLIES
PART
NO.
PO1946
PO1949-1
PO1952
PO1952-2
PO1957
PO1957-1
PO1977
DESCRIPTION
TWO PIECE TANDEM ROLLERS
TWO PIECE YELLOW
TWO PIECE WITH V-BLOCK
TWO PIECE WITH YELLOW 3" ROLL
TWO PIECE WITH WOOD
TWO PIECE WITH WOOD ALOHA ONLY
TWO PIECE PINNACLE STYLE WITH BUMPER
PO1910
ADJUSTABLE WINCH POSTS
PART
NO.
PO1995
DESCRIPTION
3” X 3” PRO DRIVE AJDUSTABLE (POST/SEAT)
WINCH POST SUPPORTS
PART
NO.
PO1970
DESCRIPTION
SUPPORT FOR 3" CHANNEL
BOW STOP COMPONENTS FOR CAROLINA SKIFF
PART
NO.
PO2947
DESCRIPTION
BOW STOP/SEAT
PONTOON X-ARMS
PART
NO.
PO2610
PO2612
DESCRIPTION
2X2 TUBE
2X2 TUBE
LENGTH
2”X2”X96”
2”X2”X84”
PO1957-1
26
WINCH POSTS
PART POSTS
WINCH
NO.
PART
PO2160
NO.
PO2161
PO2160
PO2166
PO2161
PO2180
PO2166
PO2945
PO2180
PO3400
PO2945
PO3520
PO3400
PO3520
26 26
DESCRIPTION
HEIGHT
DESCRIPTION
3” X 3” 6-HOLE, HEAVY
DUTY
3”
X
3”
4-HOLE,
HEAVY
3” X 3” 6-HOLE, HEAVYDUTY,
DUTY 6000# MAX
3”
X
3”
HEAVY
DUTY
3” X 3” 4-HOLE, HEAVY DUTY, 6000# MAX
3”
3”XX4”
3” HEAVY DUTY
3”
X
4”
3” X 4”SEACAT
3”
3”XX3”
4”STANDARD
SEACAT
1-1/2”
PWC WITH 2" TONGUE
3” X 3”FOR
STANDARD
1-1/2” FOR PWC WITH 2" TONGUE
HEIGHT
30"
30"
30"
24"
30"
48"
24"
30"
48"
30"
30"
24”
30"
24”
WINCH POST ASSEMBLIES
PART POST ASSEMBLIESDESCRIPTION
WINCH
NO.
PART
PO2010
NO.
PO2150
PO2010
PO2950
PO2150
PO2950-2
PO2950
PO2951
PO2950-2
PO3450
PO2951
PO3450
DESCRIPTION
CUSTOM 10"
SUPER
HEAVY
CUSTOM
10" DUTY
PONTOON
SUPER HEAVY DUTY
PONTOON
PONTOONWITH LADDER
(POST/SEAT)
HEAVY
DUTY FOR SKIFF
PONTOON WITH
LADDER
STANDARD
3X3X30",
WINCH
(POST/SEAT) HEAVY NO
DUTY
FOR SKIFF
STANDARD 3X3X30", NO WINCH
WINCH SEATS
PART SEATS
WINCH
NO.
PART
PO2170
NO.
PO2190
PO2170
PO2240
PO2190
PO2240
PO2166
PO2166
DESCRIPTION
PO2170
PO2170
DESCRIPTION
HEAVY DUTY
SUPER
HEAVY HEAVY
DUTY DUTY
STANDARD
SUPER HEAVY DUTY
STANDARD
WINCH SEAT AND BOW STOP COMPONENTS
PART SEAT AND BOW STOP COMPONENTS
WINCH
DESCRIPTION
NO.
PART
PO1980
NO.
PO2042
PO1980
PO3295
PO2042
PO3295
DESCRIPTION
BOW STOP "U" BRACKET
DBL
BOWV-BLOCK
STOP "U"ASSEMBLY
BRACKET WITH WINCH FOR PWC
TURN
BUCKLE
20-1/4"
DBL V-BLOCK ASSEMBLY WITH WINCH FOR PWC
TURN BUCKLE 20-1/4"
WINCH STANDS FOR CATAMARAN TRAILERS
DESCRIPTION
PART STANDS FOR CATAMARAN
WINCH
TRAILERS
NO.
PART
PO2250
NO.
PO2350
PO2250
PO2350
2X2X60"
2X2X48”
2X2X60"
PO1980
PO1980
DESCRIPTION
2X2X48”
TANDEM UNDERCARRIAGE ASSEMBLIES
PART
TANDEM
UNDERCARRIAGEDESCRIPTION
ASSEMBLIES
NO.
PART
PO9003
NO.
PO9007
PO9003
PO9010
PO9007
PO9018
PO9010
PO9018
DESCRIPTION
FOR TRAILERS WITH 13”
WHEELS – 8” STEPS
FOR
TRAILERS
WITH
14”
FOR TRAILERS WITH 13”WHEELS
WHEELS––8”
8”STEPS
STEPS
FOR
TRAILERS
WITH
15”
WHEELS
–
12”
STEPS
FOR TRAILERS WITH 14” WHEELS – 8” STEPS
63.5”
FOR TRAILERS
WITH
10” WHEELS
– NO STEPS
FOR -TRAILERS
WITH 15”
WHEELS
– 12” STEPS
63.5” - FOR TRAILERS WITH 10” WHEELS – NO STEPS
UNDERCARRIAGE ASSEMBLIES INCLUDE: 2 UNDERCARRIAGE ANGLES, 2
FENDERS, 4 STEP PADS W/CAPS, 4 SPRINGS, 8 SHACKLE PLATES, 2
UNDERCARRIAGE
ASSEMBLIES
INCLUDE: 2 UNDERCARRIAGE
ANGLES, 2
EQUALIZERS,
DECALS
AND ALL ASSOCIATED
HARDWARE.
FENDERS, 4 STEP PADS W/CAPS, 4 SPRINGS, 8 SHACKLE PLATES, 2
EQUALIZERS, DECALS AND ALL ASSOCIATED HARDWARE.
PO2350
PO2350
27 27
PONTOON LADDERS
PART
NO.
PO2962
PO2862
PO2985
DESCRIPTION
HEIGHT
FINISH
32”
36”
32”
GALVANIZED
ALUMINUM
GALVANIZED
LADDER ONLY
LADDER ONLY
LADDER ASSEMBLY*
ASSEMBLY INCLUDES: LADDER, 1-HOLE SLOT PLATE, PONTOON WINCH POST HANDLE W/PVC,
NUT RETAINER PLATE, NON SKID TAPE AND HARDWARE
WINCH POST CAPS
PART
NO.
PO3535
PO3536
PO3538
PO3541
PO3542
DESCRIPTION
2" CHANNEL WINCH POST CAP
3" CHANNEL WINCH POST CAP
1-1/2X1-1/2" WINCH POST CAP PLUG
3X3 WINCH POST CAP
3X4 WINCH POST CAP
PO2962
PP – KEEL ROLLS & BUNK SLIDES
BLACK BOW STOP ROLLERS
PART
NO.
PP1050
HOLE
SIZE
1/2"
LENGTH
3"
PO3538
BLACK ROLLS
PART
NO.
PP1450
PP1550
PP1650
DESCRIPTION
HOLE
SIZE
5/8"
5/8"
5/8"
LENGTH
KEEL ROLL
KEEL ROLL
END CAP ROLL
10"
12"
3 1/2"
GREY BUNK SLIDES
PART
NO.
PP2220
PP2222
PP2224
PP2226
HEIGHT
WIDTH
LENGTH
2"
2"
2"
2"
4"
4"
6"
6"
10'
END CAP
END CAP
10'
PP1050
RUB STRIPS
PART
NO.
PP2245
PP2258
PP2270
DESCRIPTION
UHMW STRIP V'D W/HOLES
UHMW W/HOLES
PLASTIC RUB STRIP
HEIGHT
WIDTH
LENGTH
3/8”
3/8"
1/2"
4”
12"
1 1/2"
10”
8'
15"
PP2220
(Shown with cap,
Part No. PP2222)
28
PQ – POLY ROLLS & RUB PADS
POLY BOW STOPS
PART
NO.
PQ1052
DESCRIPTION
WIDTH
BOW STOP
4"
POLY KEEL ROLLS
PART
NO.
PQ1150
PQ1200
PQ1250
WIDTH
HOLE SIZE
8"
10"
12"
5/8"
5/8"
5/8"
PQ1200
POLY END CAPS
PART
NO.
PQ1450
PQ1452
PQ1600
PQ1200
DESCRIPTION
HOLE
SIZE
5/8"
1/2"
1/2"
WIDTH
END CAP
END CAP BELL
WHEEL
3"
4"
8"
YELLOW BOW STOP ROLLERS
PART
NO.
PQ2010
HOLE
SIZE
1/2"
WIDTH
3"
PQ1452
YELLOW END CAPS
PART
NO.
PQ2030
DESCRIPTION
END CAP BELL
HOLE
SIZE
1/2"
WIDTH
3"
YELLOW RUB STRIPS, WOBBLE & KEEL ROLLERS
PART
NO.
PQ2050
DESCRIPTION
RIBBED WOBBLE ROLLER
WIDTH
5"
HOLE
SIZE
7/8"
PQ1600
PQ2010
PQ2010
29 29
PR – ROLL SHAFTS
5/8” SHAFTS
PART
NO.
PR1450
PR1500
PR1550
DESCRIPTION
LENGTH
STANDARD
STANDARD
STANDARD
9 1/2"
11"
13 1/2"
FOR
ROLLER
8"
10"
12"
PR1600
ROLL CAP NUTS
DIA.
PART
NO.
PR1650
5/8"
PS – ROLL BRACKETS & ASSEMBLIES
PR1650
ROLL ASSEMBLIES
PART
NO.
PS1010
PS1310-1
PS1550
DESCRIPTION
LENGTH
KEEL ROLL
KEEL ROLL (POLY)
CATAMARAN BRACKET ASSEMBLY
5"
10"
12"
ROLL BRACKETS
PART
NO.
PS1110
PS1180
PS1500
PS1540
DESCRIPTION
LENGTH
TONGUE SIDE PLATE, EACH 3"
TONGUE BRACKET ONLY
TANDEM STRAIGHT SIDE
PONTOON
5"
5"
12"
PS1550
ROLL ASSEMBLY COMPONENTS
PART
NO.
PS1760
PS1835
DESCRIPTION
6" GALVANIZED PIPE LEGS-5/8" HOLE PAIR 1" PIECE
ALUM ROLLER BEACHRING PAD- PENNEX
PS1110
ROLLER ASSEMBLIES
PART
NO.
PS1880
PS2050
PS2060
DESCRIPTION
ALUM I-BEAM 4 ROLLER ASSEMBLY- PENNEX
LONGHORN 1/2" 2X3 + ARM
LONGHORN 1/2" 2X2 + ARM
PS1180
30 30
ROLLER ASSEMBLY COMPONENTS
PART
NO.
PS1930
PS2150
PS2210
DESCRIPTION
ROLLER X-ARM 2X3X32" - EACH
SET SCREW WITH NUTS
NUT RETAINER PLATE
CLAMP-ON SOCKETS
PART
NO.
PS2401
PS2640
PS2649
PS2652
PS2653
PS2653-1
PS2649
DESCRIPTION
4" CLAMP-ON SOCKET 1-1/2" SQUARE TUBE
3" X 3" CLAMP-ON ASSEMBLY WITH 12" BUNK BRACKET
3X3 CLAMP-ON SOCKET
3X3 CLAMP-ON WITH SOCKET FOR 2X2 TUBE
ADJUSTABLE UPRIGHT BOW REST CLAMP-ON
ADJUSTABLE CLAMP-ON FOR 1-1/2" SQUARE TUBE
AIRBOAT GUIDE POLES
PART
NO.
PS4900
PS4901
DESCRIPTION
AIRBOAT WELDED GUIDE POLE (26")
AIRBOAT GUIDE BOARD POLE 20"
PS2640
BOW BOARD ASSEMBLIES
PART
NO.
PS5100
DESCRIPTION
BOW REST TYPE BOW BOARD 6' ASSEMBLY
PT – BUNKS & BRACKETS
20 OUNCE GREY CARPET
PART
NO.
PT0276
PT0277
PT0278
PT0279
PT0281
LENGTH
WIDTH
PER FOOT
PER FOOT
PER FOOT
PER FOOT
100’ ROLL
12”
9"
20"
24"
12”
PS2653
PT0277
31 31
PLUSH BLACK CARPET
PART
NO.
PT0302
PT0303
PT0303-1
WIDTH
LENGTH
PER FOOT
PER FOOT
PER FOOT
9"
20"
24"
CARPETED BUNKS (PRESSURE TREATED PINE)
PART
NO.
PT0296
PT0400
PT0950
PT1091
PT1300
DESCRIPTION
FLAT
FLAT
FLAT
FLAT
FLAT
HEIGHT
WIDTH
LENGTH
2"
2”
2"
2"
2”
8"
6”
10"
4"
4”
PER FOOT
10’
PER FOOT
PER FOOT
7’
CYPRESS BUNKS WITH CARPET
PART
HEIGHT
WIDTH
NO.
PT4995
6”
3”
PT5001
8”
3”
PT5150
8”
3”
PT5200
10”
3”
PT5201
10”
3”
PT5202
10”
3”
PT5210
12”
3”
PT5300
10”
4”
PT5415
10”
4”
**BUNK DIAGONAL CUT WITH TRIPLE CARPET
PT1091
LENGTH
9’
8’
10’
10’
12’
14’
10’
10’
16’
PT2080
CARPETED SIDE GUIDES (PRESSURE TREATED PINE)
PART
NO.
PT1107
PT3102
PT3105
PT3125
PT3126
HEIGHT
WIDTH
LENGTH
6"
4"
4"
4"
6"
2"
2"
2"
2"
2"
PER FOOT
4'
5'
12'
10'
PT2080
PT3102
32 32
GALVANIZED SIDE GUIDE ASSEMBLIES
PART
DESCRIPTION
NO.
PT2110 NARROW (PAIR)
PT2112 WIDE (PAIR)
PT2120 HEAVY DUTY (PAIR)**
*SIDE GUIDE ASSEMBLIES INCLUDE THE FOLLOWING:
[4] SIDE GUIDE BOARD BRACKET BOLT PLATES
[4] SIDE GUIDE BOARD BRACKETS
[2] 2X4X3 CARPETED SIDE GUIDES
[8] 3/8”X3” PLATED SCREWS
[8] 3/8”X1-1/4” PLATED LAG SCREWS
[8] 3/8-16 PLATED NI-LOCK NUTS
**HEAVY DUTY KITS INCLUDE THE FOLLOWING:
[4] 1-1/2”X1-1/2" WINCH POST CAP PLUGS
[4] 20" AIRBOAT GUIDE BOARD POLES
[2] 2”X6”X6’ CARPETED SIDE GUIDES
[4] UNIVERSAL GUIDE-ON BRACKETS
[8] 1/2"X2-1/16”X7-13/16” GALVANIZED U-BOLTS
[16] 1/2-13 GALVANIZED HEX NUTS
[16] 1/2” GALVANIZED FLAT WASHERS
[16] 1/2” GALVANIZED LOCK WASHERS
PT2160
GALVANIZED SIDE GUIDE COMPONENTS
PART
NO.
PT2100
PT2080
PT2150
PT2160
PT2170
PT2180
DESCRIPTION
PT2180
BRACKET KIT, NO BOARDS
CUSTOM BOARD BRACKET (EACH)
WIDE BOARD BRACKETS (PAIR)
BRACKET BOLT PLATE
NARROW BOARD BRACKET (EACH)
WIDE BOARD BRACKET (EACH)
T-BUNK ASSEMBLIES
PART
NO.
PT0301-1
DESCRIPTION
18" T-BUNK ASSEMBLY
PT1550
GALVANIZED BUNK BRACKETS
PART
NO.
PT1500
PT1550
PT1560
PT1600
PT1610
PT1620
DESCRIPTION
UPRIGHT
WITH PIVOT TOP
CHANNEL - NO PIVOT TOP
WITH PIVOT TOP (ASSEMBLY)
WITH PIVOT TOP
UPRIGHT
LENGTH
12”
9"
9"
12"
12"
8"
GALVANIZED SQUARE TUBE BUNK BRACKETS
PART
NO.
PT1760
DIAMETER
1-1/2” X 1-1/2"
LENGTH
12”
PT1610
33 33
BUNK BRACKET U-BOLTS WITH NUTS
PART
NO.
PT1650
PT1700
LENGTH
3"
4"
PERMALOCK BUNK BRACKETS
PART
NO.
PT1612
LENGTH
DESCRIPTION
ADJUSTABLE
3"
PT1612
GALVANIZED BUNK BRACKET COMPONENTS
PART
NO.
PT1520
DESCRIPTION
BUNK YOKE, UPRIGHT
GALVANIZED PONTOON WING BRACKETS
PART
NO.
PT2018
PT2025
PT1520
DESCRIPTION
TDE #44012
SINGLE WITH YOKE
GALVANIZED PIVOT “L” BRACKETS
PART
NO.
PT2050
PT2060
PT2070
DESCRIPTION
WITH FASTENERS (WIDE)
WITHOUT FASTENERS (STANDARD)
WITHOUT FASTENERS (WIDE)
PT2018
BOW BOARD KITS
PART
NO.
PT2196
PT2197
PT2200
DESCRIPTION
FOR ALS TO 24' 3000-600 (ADJ) WITH 2” X 6” X 6’ BOARDS
FOR ALS 26'-UP 6000-820 (ADJ) WITH 2” X 6” X 7’ BOARDS
FOR ML/ALS 2300#-2900# (ADJ) WITH 2” X 6” X 4’ BOARDS
CROSSMEMBER "L" BRACKETS
PART
NO.
PT2205
PT2210
PT2211
PT2219
DESCRIPTION
ROLLER (ADJUSTABLE)
CYPRESS BUNK BRACKET (ADJ)
(ADJUSTABLE)
TALL (ADJUSTABLE)
LENGTH
PT2025
3"
5-1/2"
8"
10"
PT2205
3434
PU – TONGUES AND COUPLERS
SWING TONGUE ASSEMBLIES
PART
WIDTH
HEIGHT
LENGTH
GAUGE
NO.
PU0520†
3"
3"
6’
11
PU0525†
3"
4"
6’
11
PU2350
2”
3”
8’
14
PU2700
3”
3”
7’ 6”
14
PU2750
3”
4”
6’
11
PU2850
3”
3”
6’
11
PU2900
3”
3”
9’
11
PU2905
3”
3”
10’
11
*SWING TONGUE ASSEMBLIES INCLUDE THE FOLLOWING:
[1] SWING TONGUE REAR SECTION 3X3X4' WITH PIVOT BOX
[1] 3X3X24" SWING TONGUE FRONT SECTION
[1] SWING TONGUE HITCH PIN 5/8X5"
[1] PLATED BOLT, 5/8” X 4-1/2” GRADE 5
[1] PLATED NI-LOCK NUT 5/8-11
†USES UFP PART NUMBER 47153-24
PU0520
GALVANIZED SWING TONGUE PIVOT BOXES
PART
NO.
PU1425
PU1426
PU1427
SIZE
3X5 - UFP
3X3 - UFP
3X4 - UFP
PU155-22
ALUMINUM SPACERS
PART
NO.
PU155-02
PU155-22
DESCRIPTION
2-HOLE
STANDARD
I.D.
O.D.
LENGTH
1/4"
1/2"
2"
1-1/2"
4-3/4"
3"
COUPLERS
PART
NO.
PU2250
PU2270
BRAND
D&L
UFP*
BALL SIZE
2-5/16"
2-5/16"
*REQUIRES 20K TONGUE BRACKET PU2271
CAPACITY
FITS
TONGUE
3"
3"
8,500 LBS.
20,000 LBS.
PU2250
PLATED GAP TUBING
PART
NO.
PU3802
PU3803
PU3804
PU3806
PU3808
PU3810
PU3811
THICKNESS
HEIGHT
WIDTH
LENGTH
11 GAUGE
11 GAUGE
4 GAUGE
4 GAUGE
11 GAUGE
11 GAUGE
7 GAUGE
1.5"
2"
2"
2"
3"
3"
3"
1.5"
2"
2"
3"
3"
4"
4"
PER FOOT
PER FOOT
PER FOOT
PER FOOT
PER FOOT
PER FOOT
PER FOOT
PU3802
3535
PV – GUIDES/BOW REST
TONGUE JACKS
PART
NO.
PV1152
PV1155
PV0965
PV0976
DESCRIPTION
CAPACITY
SWIVEL MOUNT
SWIVEL MOUNT – D&L
SWIVEL MOUNT WITH DUAL WHEEL
SQUARE TUBE – D&L
1,000 LBS.
1,000 LBS.
1,500 LBS.
2,500 LBS.
SIDEMOUNT JACKS
PART
NO.
PV0905
DESCRIPTION
CAPACITY
SIDEMOUNT FIXED*
PV0965
1,000 LBS.
*REQUIRES PRO I-BEAM JACK MOUNT (PV1020 or PV1021)
PRO I-BEAM JACK MOUNTS
PART
NO.
PV1020
SIZE
4-1/2"
JACK COMPONENTS
PART
NO.
PV3150
PV1020
DESCRIPTION
TONGUE JACK WHEEL
VINYL COATED SAFETY CABLES
PART
NO.
PV1531
SIZE
16"
5,000 LBS.
BASIC SPARE TIRE MOUNT
PART
NO.
PV1900
CAPACITY
DESCRIPTION
INCLUDES LOCK
PV1900
FINISH
PLATED
PRO SPARE TIRE MOUNTS
PART
NO.
PV1820
PV1818
DESCRIPTION
ASSEMBLY
WITH 5 LUG HUB
FINISH
GALV
GALV
PV1820
36
36
SPARE TIRE MOUNTS FOR GALVANIZED TRAILERS
3636
HUBTRAILERS
SIZE
SPARE
PART TIRE MOUNTS FOR GALVANIZED
FINISH FOR GALVANIZED TRAILERS
SPARE
TIRE
MOUNTS
NO.
HUB SIZE
PART
PART
PV1850
NO.
NO.
PV1850
PV1850
FINISH
GALV
FINISH
GALV
GALV
HUB
SIZE
ALL
ALL
ALL
DOUBLE SPARE TIRE MOUNTS FOR GALVANIZED TRAILERS
DOUBLE
SPARE
TIRE MOUNTS FOR GALVANIZED
TRAILERS
PART
DESCRIPTION
FINISH
DOUBLE
SPARE
TIRE MOUNTS FOR GALVANIZED
TRAILERS
NO.
PART
PART
PV1835
NO.
NO.
PV1840
PV1835
PV1835
PV1840
PV1840
DESCRIPTION
WITH TWO
FIVE LUG HUBS
DESCRIPTION
WITH
TWO
SIX LUG
WITH TWO FIVE
LUGHUBS
HUBS
WITH
TWO
FIVE
LUG
HUBS
WITH TWO SIX LUG HUBS
WITH TWO SIX LUG HUBS
FINISH
GALV
FINISH
GALV
GALV
GALV
GALV
GALV
PART
PART
PV1885
NO.
NO.
PV1885-1
PV1885
PV1885
PV1886
PV1885-1
PV1885-1
PV1887
PV1886
PV1886
PV1888
PV1887
PV1887
PV1896
PV1888
PV1888
PV1897
PV1896
PV1896
PV1898
PV1897
PV1897
PV1898
PV1898
DESCRIPTION
BAR ONLY
DESCRIPTION
ASSEMBLY
BAR ONLY
BAR ONLY
WITH
FIVE LUG HUB
ASSEMBLY
ASSEMBLY
SIX LUG
WITH
FIVE
LUGHUB
HUB
WITH
LUG
HUB
WITH FIVE
EIGHT
LUG
HUB
SIX LUG HUB
WITH
SIX
LUG
HUB
FIVE LUG
DISC
WITH EIGHT
LUG
HUB
WITH
LUG
HUB
WITH EIGHT
SIX
DISC
FIVELUG
LUG
DISC
WITH
LUG
DISC
EIGHT
LUG
DISC
WITH FIVE
SIX
LUG
DISC
WITH
SIX
LUG
DISC
WITH EIGHT LUG DISC
WITH EIGHT LUG DISC
FINISH
FINISH
FINISH
GALV
GALV
GALV
GALV
GALV
GALV
GALV
GALV
GALV
GALV
GALV
GALV
GALV
GALV
GALV
GALV
GALV
PART
PART
PV1840-1
NO.
NO.
PV1841-1
PV1840-1
PV1840-1
PV1841-1
PV1841-1
DESCRIPTION
WITH TWO
SIX LUG DISCS
DESCRIPTION
WITH TWO SIX
EIGHT
LUG
DISCS
LUG
DISCS
WITH
TWO
SIX
LUG
DISCS
WITH TWO EIGHT LUG DISCS
WITH TWO EIGHT LUG DISCS
ML SERIES SPARE TIRE MOUNTS
MLPART
SERIES SPARE
TIRE MOUNTS
DESCRIPTION
ML NO.
SERIES SPARE
TIRE MOUNTS
ML SERIES DOUBLE SPARE TIRE MOUNTS
MLPART
SERIES DOUBLE
SPARE TIRE MOUNTSFINISH
DESCRIPTION
ML NO.
SERIES DOUBLE
SPARE TIRE MOUNTS
GUIDE ASSEMBLIES
GUIDE
PART ASSEMBLIES
GUIDE
NO. ASSEMBLIES
PART
PART
NO.
PV2155
NO.
PV2155
PV2155
PV2158
PV2158
PV2158-1
PV2158
PV2158-1
PV2165
PV2158-1
PV2165
PV2204
PV2165
PV2207
PV2204
PV2204
PV2207
PV2207
PV1885
PV1885
PV1885
PV1886
PV1886
PV1886
FINISH
GALV
FINISH
GALV
GALV
GALV
GALV
DESCRIPTION
DESCRIPTION
UPRIGHT GUIDE ASSEMBLY,
DESCRIPTION
HEAVY
DUTY
FOR
MCV (PAIR)
UPRIGHT
GUIDE
ASSEMBLY,
UPRIGHT
GUIDE
ASSEMBLY,
TUBE
GUIDE
ASSEMBLY
STANDARD,
HEAVY
DUTY
FOR
MCV (PAIR)
HEAVY
DUTYASSEMBLY
FOR MCV
(PAIR)
WITH
U-BOLTS
(PAIR)
TUBE GUIDE
STANDARD,
TUBE
GUIDE
ASSEMBLY
STANDARD,
STANDARD
HEAVY
WITH
CLAMP-ON BRACKETS
HEAVY
DUTY
WITH DUTY
U-BOLTS
(PAIR)
HEAVY
DUTY
WITH
U-BOLTS
(PAIR)
TUBE
GUIDE,
SUPER
HEAVY
DUTY
ASSEMBLY
1'LONGER
STANDARD HEAVY DUTY WITH CLAMP-ON
BRACKETS
STANDARD
HEAVY
DUTY
WITH
CLAMP-ON
BRACKETS
AND
TALLER
(PAIR)
TUBE GUIDE, SUPER HEAVY DUTY ASSEMBLY 1'LONGER
TUBE
GUIDE,
SUPER
HEAVY
DUTY ASSEMBLY 1'LONGER
AIRBOAT
GUIDE
3' BOARD
ASSEMBLY
AND TALLER
(PAIR)
AND TALLER
(PAIR)
AIRBOAT
GUIDE
6'
BOARD
ASSEMBLY
3'
AIRBOAT
AIRBOAT GUIDE
GUIDE 3'
6' BOARD
BOARD ASSEMBLY
ASSEMBLY
AIRBOAT GUIDE 6' BOARD ASSEMBLY
PV2158
PV2158
PV2158
GUIDE COMPONENTS
GUIDE
PART COMPONENTS
GUIDE
NO. COMPONENTS
PART
PART
PV1930
NO.
NO.
PV2154
PV1930
PV1930
PV2154
PV2157
PV2154
PV2157
PV2159
PV2157
PV2159
PV2164
PV2159
PV2164
PV2166
PV2164
PV2166
PV2166
DESCRIPTION
DESCRIPTION
UNIVERSAL GUIDE-ON BRACKET
ASSEMBLY (PAIR)
DESCRIPTION
PVC
SLEEVE
&
CAP
8'
FOR
HEAVY
DUTY TUBE
GUIDE
UNIVERSAL GUIDE-ON BRACKET ASSEMBLY
(PAIR)
UNIVERSAL
GUIDE-ON
BRACKET
ASSEMBLY
(PAIR)
PVC SLEEVE
SLEEVE &
& CAP
CAP 8'
FOR
STANDARD
HEAVY
DUTY
TUBE
PVC
FOR
HEAVY DUTY
TUBE
GUIDE
PVC
FOR
HEAVY DUTY
TUBE
GUIDE
GUIDE
PVC SLEEVE
SLEEVE &
& CAP
CAP 8'
FOR
STANDARD
HEAVY
DUTY
TUBE
PVC
SLEEVE
& CAP FOR HEAVY
STANDARD
HEAVY
DUTY
TUBE
TUBE
GUIDE STANDARD
DUTY
WITHOUT
PVC
(EACH)
GUIDE
GUIDE
TUBE GUIDE,
SUPER HEAVY
DUTY
(GUIDE
ONLY)PVC
1'LONGER
GUIDE STANDARD
HEAVY
DUTY
WITHOUT
(EACH)
TUBE
GUIDE
STANDARD
HEAVY
DUTY
WITHOUT
(EACH)
&
TALLER
(EACH)
TUBE
GUIDE,
SUPER HEAVY
DUTY
(GUIDE
ONLY)PVC
1'LONGER
TUBE
GUIDE,
SUPER
HEAVY
DUTY
(GUIDE
ONLY)
1'LONGER
PVC
SLEEVE
&
CAP FOR
SUPER
HEAVY
DUTY
TUBE
GUIDE
& TALLER
(EACH)
& TALLER
(EACH)
PVC
SLEEVE
& CAP FOR SUPER HEAVY DUTY TUBE GUIDE
PVC SLEEVE & CAP FOR SUPER HEAVY DUTY TUBE GUIDE
PV1930
PV1930
PV1930
3737
PONTOON GUIDE ASSEMBLIES
PART
NO.
PV2220
DESCRIPTION
PONTOON GUIDE ASSEMBLY, PVC (EACH)
BOW REST/ROLLER-GUIDE ASSEMBLY
PART
NO.
PV2280-3
PV2282
PV2282-3
DESCRIPTION
BOW REST/GUIDE PAD ASSEMBLY (18")
BOW REST/ROLLER-GUIDE ASSEMBLY
BOW REST/ROLLER-GUIDE ASSEMBLY (POLY)
BOW REST/ROLLER-GUIDE COMPONENTS
PART
NO.
PV2281
PV2282-2
DESCRIPTION
PV2280-3
BOW REST WITHOUT GUIDE (ALUM/SB) 8" LEG
BOW REST/ROLLER GUIDE, BAR ONLY 8" LENGTH
STRAPS
PART
NO.
PV2500
DESCRIPTION
TIE DOWN STRAP 8'
DECALS
PART
NO.
PV9924
PV9998
DESCRIPTION
TRAILER STRIPING 3-1/4" (PER FOOT)
4" X 10-1/2" NON SKID TAPE
PV2282
PV2282-2
3838
PY – FASTENERS
GRADE 5 PLATED BOLTS
PART
NO.
PY0210
PY0215
PY0225
PY0235
PY0257
PY0250
PY0208
PY0252
PY0260
PY0270
PY0273
PY0280
DIAMETER
LENGTH
3/8"
3/8"
3/8"
3/8"
7/16"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
1"
1-1/4"
3"
4"
1"
1-1/2"
1-3/4"
2-1/2"
3-1/2"
4-1/2"
5"
3-1/2"
PY0210
PLATED CARRIAGE BOLTS
PART
NO.
PY0309
DIAMETER
LENGTH
FINISH
5/16"
2-1/2"
PLATED
GALVANIZED CARRIAGE BOLTS
PART
NO.
PY1390
DIAMETER
LENGTH
1/4"
1-1/4"
FINISH
PY0308
HDG
LAG BOLTS
PART
NO.
PY0409
DIAMETER
LENGTH
FINISH
3/8"
1-1/4"
PLATED
PLATED SAE FLAT WASHERS
PART
NO.
PY0905
PY0906
DIAMETER
PY1390
3/4"
1”
PY0905
3939
STAINLESS LOCK WASHERS
PART
NO.
PY1020
PY1022
PY1025
DIAMETER
3/8"
7/16”
1/2"
PLATED NI-LOCK NUTS
PART
NO.
PY1205
PY1305
PY1306
PY1310
PY1315
THREAD
PY1305
1/4-20
3/8-16
3/8-24*
7/16-14
1/2-13
*FINE THREAD
PLATED SERRATED FLANGE NUTS
PART
NO.
PY1291
DIAMETER
5/16-18
MISCELLANEOUS GALVANIZED BOLTS
PART
NO.
PY1496
DESCRIPTION
BOLT, FANGED
DIAMETER
LENGTH
5/16"
2-1/4"
PY1496
MISCELLANEOUS STAINLESS STEEL BOLTS
PART
NO.
PY1940
DESCRIPTION
MACHINED BOLTS
GALVANIZED NUTS
PART
NO.
PY1400
PY1404
PY1405
PY1406
PY1410
PY1414
PY1415
DESCRIPTION
NUT, HEX
NUT, HEX
NUT, HEX
NUT, HEX
NUT, HEX
NUT, TOP LOCK
NUT, TOP LOCK
DIAMETER
LENGTH
1/4"
2-3/4"
DIAMETER
PY1940
1/4"
5/16"
3/8-16
7/16"
1/2-13
5/16"
3/8"
GALVANIZED FLAT WASHERS
PART
NO.
PY1505
PY1515
PY1520
PY1525
DESCRIPTION
USS
USS
USS
SAE
DIAMETER
3/8"
1/2"
7/8"
7/8"
PY1404
40 40
GALVANIZED LOCK WASHERS
PART
NO.
PY1590
PY1592
PY1605
PY1606
PY1610
DIAMETER
1/4"
5/16”
3/8"
7/16"
1/2"
PLATED COTTER PINS
PART
NO.
PY1340
PY1345
SIZE
PY1640
1/8”X1/3/4
HAIR #28
GALVANIZED HEX HEAD SCREWS
PART
NO.
PY1650
PY1615
PY1620
PY1624
PY1632
PY1655
PY1640
PY1644
PY1648
PY1652
PY1656
DIAMETER
LENGTH
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1-1/4"
2-1/2"
4"
4-1/2"
5-1/2"
1-1/2"
3-1/2"
4"
4-1/2"
5"
5-1/2"
PY1650
STAINLESS HEX HEAD SCREWS
PART
NO.
PY1710
PY1726
PY1733
PY1735
PY1736
PY1737
PY1740
DIAMETER
LENGTH
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1-1/4"
4-1/2"
1-1/2"
3-1/2"
4"
4-1/2"
5-1/2"
PY1740
STAINLESS HEX NUTS
PART
NO.
PY1780
PY1782
PY1785
DIAMETER
7/16"
3/8"
1/2"
PY1782
STAINLESS
NI-LOCK
NUTS
STAINLESS
NI-LOCK
NUTS
STAINLESS
NI-LOCK
NUTS
STAINLESS
NI-LOCK
NUTS
STAINLESS
NI-LOCK
NUTS
PART
STAINLESS
NI-LOCK
NUTS DIAMETER
PART
PART
PART
PART
NO.
NO.
PART
NO.
NO.
NO.
PY1804
NO.
PY1804
PY1804
PY1804
PY1804
PY1810
PY1804
PY1810
PY1810
PY1810
PY1810
PY1815
PY1810
PY1815
PY1815
PY1815
PY1815
PY1820
PY1815
PY1820
PY1820
PY1820
PY1820
PY1825
PY1820
PY1825
PY1825
PY1825
PY1825
PY1825
41
41
4141
41
41 41
DIAMETER
DIAMETER
DIAMETER
DIAMETER
DIAMETER
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
1/4"
3/8"
3/8"
3/8"
3/8"
7/16"
3/8"
7/16"
7/16"
7/16"
7/16"
1/2"
7/16"
1/2"
1/2"
1/2"
1/2"
5/8"
1/2"
5/8"
5/8"
5/8"
5/8"
5/8"
STAINLESS
FLAT
WASHERS
STAINLESS
FLAT
WASHERS
STAINLESS
FLAT
WASHERS
STAINLESS
FLAT
WASHERS
STAINLESS
FLAT
WASHERSDIAMETER
PART
STAINLESS
FLAT
WASHERS
DIAMETER
PART
DIAMETER
DIAMETER
PART
PART
STAINLESS
CARRIAGE
BOLTS
STAINLESS
CARRIAGE
BOLTS
STAINLESS
CARRIAGE
BOLTS
STAINLESS
CARRIAGE
BOLTS
STAINLESS
CARRIAGE
BOLTS
PART
STAINLESS
CARRIAGE
BOLTS
DIAMETER
PART
PART
PART
PART
NO.
NO.
PART
NO.
NO.
NO.
PY1930
NO.
PY1930
PY1930
PY1930
PY1930
PY1930
DIAMETER
DIAMETER
DIAMETER
DIAMETER
DIAMETER
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
GALVANIZED
SQUARE
U-BOLTS
GALVANIZED
SQUARE
U-BOLTS
GALVANIZED
SQUARE
U-BOLTS
GALVANIZED
SQUARE
U-BOLTS
GALVANIZED
SQUARE
U-BOLTS
PART
GALVANIZED
SQUARE
U-BOLTS
DIAMETER
WIDTH
PART
PART
PART
PART
NO.
NO.
PART
NO.
NO.
NO.
PY1990
NO.
PY1990
PY1990
PY1990
PY1990
PY1992
PY1990
PY1992
PY1992
PY1992
PY1992
PY1995
PY1992
PY1995
PY1995
PY1995
PY1995
PY2010
PY1995
PY2010
PY2010
PY2010
PY2010
PY2011
PY2010
PY2011
PY2011
PY2011
PY2011
PY2015
PY2011
PY2015
PY2015
PY2015
PY2015
PY2020
PY2015
PY2020
PY2020
PY2020
PY2020
PY2025
PY2020
PY2025
PY2025
PY2025
PY2025
PY2027
PY2025
PY2027
PY2027
PY2027
PY2027
PY2035
PY2027
PY2035
PY2035
PY2035
PY2035
PY2037
PY2035
PY2037
PY2037
PY2037
PY2037
PY2045
PY2037
PY2045
PY2045
PY2045
PY2045
PY2050
PY2045
PY2050
PY2050
PY2050
PY2050
PY2053
PY2050
PY2053
PY2053
PY2053
PY2053
PY2055
PY2053
PY2055
PY2055
PY2055
PY2055
PY2060
PY2055
PY2060
PY2060
PY2060
PY2060
PY2065
PY2060
PY2065
PY2065
PY2065
PY2065
PY2070
PY2065
PY2070
PY2070
PY2070
PY2070
PY2075
PY2070
PY2075
PY2075
PY2075
PY2075
PY2077
PY2075
PY2077
PY2077
PY2077
PY2077
PY2078
PY2077
PY2078
PY2078
PY2078
PY2078
PY2079
PY2078
PY2079
PY2079
PY2079
PY2079
PY2081
PY2079
PY2081
PY2081
PY2081
PY2081
PY2087
PY2081
PY2087
PY2087
PY2087
PY2087
PY2089
PY2087
PY2089
PY2089
PY2089
PY2089
PY2090
PY2089
PY2090
PY2090
PY2090
PY2090
PY2091
PY2090
PY2091
PY2091
PY2091
PY2091
PY2095
PY2091
PY2095
PY2095
PY2095
PY2095
PY2096
PY2095
PY2096
PY2096
PY2096
PY2096
PY2096
PY1815
PY1815
PY1815
PY1815
PY1815
PY1815
DIAMETER
DIAMETER
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
1/4"
3/8"
3/8"
3/8"
3/8"
7/16"
3/8"
7/16"
7/16"
7/16"
7/16"
1/2"
7/16"
1/2"
1/2"
1/2"
1/2"
1/2"
PART
NO.
NO.
PART
NO.
NO.
NO.
PY1900
NO.
PY1900
PY1900
PY1900
PY1900
PY1902
PY1900
PY1902
PY1902
PY1902
PY1902
PY1904
PY1902
PY1904
PY1904
PY1904
PY1904
PY1905
PY1904
PY1905
PY1905
PY1905
PY1905
PY1905
DIAMETER
DIAMETER
DIAMETER
DIAMETER
DIAMETER
3/8"
3/8"
3/8"
3/8"
3/8"
3/8”
3/8"
3/8”
3/8”
3/8”
3/8”
3/8"
3/8”
3/8"
3/8"
3/8"
3/8"
1/2"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
7/16"
1/2"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
WIDTH
WIDTH
WIDTH
WIDTH
WIDTH
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
1-9/16"
2-7/8"
1-9/16"
1-9/16"
1-9/16"
1-9/16"
2-1/16"
1-9/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-3/8”
2-1/16"
2-3/8”
2-3/8”
2-3/8”
2-3/8”
3-1/16"
2-3/8”
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
2-1/16"
3-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16”
2-1/16"
2-1/16”
2-1/16”
2-1/16”
2-1/16”
2-1/16”
2-1/16”
2-1/16”
2-1/16”
2-1/16”
2-3/4"
2-1/16”
2-3/4"
2-3/4"
2-3/4"
2-3/4"
3-1/16"
2-3/4"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-5/16"
3-1/16"
3-5/16"
3-5/16"
3-5/16"
3-5/16"
4-1/16"
3-5/16"
4-1/16"
4-1/16"
4-1/16"
4-1/16"
4-1/16"
4-1/16"
4-1/16"
4-1/16"
4-1/16"
3-1/16"
4-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
2-1/16"
3-1/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
4-1/16"
2-1/16"
4-1/16"
4-1/16"
4-1/16"
4-1/16"
3-1/16"
4-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
3-1/16"
LENGTH
LENGTH
LENGTH
LENGTH
LENGTH
LENGTH
1"
1"
1"1"
1"
1"
LENGTH
LENGTH
LENGTH
LENGTH
LENGTH
LENGTH
7-1/2"
7-1/2"
7-1/2"
7-1/2"
7-1/2"
8-5/16”
7-1/2"
8-5/16”
8-5/16”
8-5/16”
8-5/16”
2-5/8"
8-5/16”
2-5/8"
2-5/8"
2-5/8"
2-5/8"
4-5/16"
2-5/8"
4-5/16"
4-5/16"
4-5/16"
4-5/16"
3-5/16"
4-5/16"
3-5/16"
3-5/16"
3-5/16"
3-5/16"
4-13/16"
3-5/16"
4-13/16"
4-13/16"
4-13/16"
4-13/16"
5-13/16"
4-13/16"
5-13/16"
5-13/16"
5-13/16"
5-13/16"
6-5/16"
5-13/16"
6-5/16"
6-5/16"
6-5/16"
6-5/16"
5-1/2”
6-5/16"
5-1/2”
5-1/2”
5-1/2”
5-1/2”
4-5/16"
5-1/2”
4-5/16"
4-5/16"
4-5/16"
4-5/16"
5-5/16"
4-5/16"
5-5/16"
5-5/16"
5-5/16"
5-5/16"
5-5/16"
5-5/16"
5-5/16"
5-5/16"
5-5/16"
6-13/16"
5-5/16"
6-13/16"
6-13/16"
6-13/16"
6-13/16"
7-5/16”
6-13/16"
7-5/16”
7-5/16”
7-5/16”
7-5/16”
7-13/16”
7-5/16”
7-13/16”
7-13/16”
7-13/16”
7-13/16”
4"
7-13/16”
4"
4"4"
4"
4-13/16"
4"
4-13/16"
4-13/16"
4-13/16"
4-13/16"
6-5/16"
4-13/16"
6-5/16"
6-5/16"
6-5/16"
6-5/16"
6-13/16"
6-5/16"
6-13/16"
6-13/16"
6-13/16"
6-13/16"
7-5/16”
6-13/16"
7-5/16”
7-5/16”
7-5/16”
7-5/16”
8-1/2"
7-5/16”
8-1/2"
8-1/2"
8-1/2"
8-1/2"
8"
8-1/2"
8"
8"
8"
8"
5-5/16"
8"
5-5/16"
5-5/16"
5-5/16"
5-5/16"
7"
5-5/16"
7"
7"7"
7"
8-13/16"
7"
8-13/16"
8-13/16"
8-13/16"
8-13/16"
2-13/16"
8-13/16"
2-13/16"
2-13/16"
2-13/16"
2-13/16"
3-13/16"
2-13/16"
3-13/16"
3-13/16"
3-13/16"
3-13/16"
2-13/16"
3-13/16"
2-13/16"
2-13/16"
2-13/16"
2-13/16"
4-5/16"
2-13/16"
4-5/16"
4-5/16"
4-5/16"
4-5/16"
4-5/16"
Use the diagram
Use
the
diagram
Use
thethe
diagram
Use
diagram
Use
the
diagram
above
for
proper
above
for
proper
Use
the
above
for
proper
above
for
proper
aboveu-bolt
fordiagram
proper
u-bolt
above
for
u-bolt
u-bolt
u-boltproper
measurement
measurement
u-bolt
measurement
measurement
measurement
measurement
PY2075
PY2075
PY2075
PY2075
PY2075
PY2075
4242
STAINLESS U-BOLTS
PART
NO.
PY2500
PY2530
PY2532
PY2534
PY2536
PY2540
WIDTH
DIAMETER
LENGTH
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1-9/16"
2-1/16"
2-1/16"
2-1/16"
2-1/16"
3-1/16"
2-5/8"
4-13/16"
5-5/16"
5-13/16"
6-5/16"
4-5/16"
DIAMETER
LENGTH
WIDTH
1/2"
1/2"
1/2"
4-1/2"
4-1/2"
5-1/2"
2-1/2"
3-1/4"
3-1/4"
PLATED “L” BOLTS
PART
NO.
PY4010
PY4011
PY4012
XB – CROSSMEMBERS
3” X 3” GALVANIZED CROSSMEMBERS
PART
NO.
XB4290
XB4291
DESCRIPTION
79-1/2" "STRAIGHT"
79-1/2" "V"
GAUGE
7 GA
7 GA
3” X 3” ALUMINUM CROSSMEMBERS
PART
NO.
XB4405
XB4429
XB4440
XB4442
XB4444
XB4445
XB5192
XB5185
DESCRIPTION
70” “V”
76” “V”
79" "V"
79" "V"
79" "STRAIGHT"
79" "STRAIGHT"
60" "V"
48" "V"
GAUGE
3/16"
3/16"
1/4"
3/16"
3/16"
1/4"
3/16"
3/16"
PY4012
43
43
RM – MARINECRAFT
Attractively mounted on white packages, Marine Craft parts help pre-sell your trailer accessories. These high
impulse parts will sell themselves. Marine Craft replacement parts will fit most of the better quality trailers
manufactured in the U.S.A. and meet or exceed OEM specifications.
PART
NO.
RM0100
RM0150
RM0158
RM0160
RM0350
RM0450
RM0470
RM0600
RM0650
RM0820
RM1250
RM1260
RM3200
RM3250
RM3300
RM3310
RM4050
RM4100
RM4150
RM4200
RM4328
RM4530
RM5160
RM5162
RM5250
RM5300
RM5350
RM5450
RM5550
RM5600
RM5650
RM5700
RM5750
RM5800
RM5850
RM5900
RM6010
RM6020
RM6024
DESCRIPTION
13/16” LUG NUTS (5)
13/16” LUG BOLTS (5)
PRESS-IN STUD 10” DRUM, 5 LUG, 6 LUG OR 8 LUG
PRESS-IN STUD 4 LUG, 5 LUG – 1 OR 1-1/16”
BEARING KIT 1-3/8 X 1-1/16"
BEARING PROTECTOR (PAIR) 1.980 STAINLESS
BEARING PROTECTOR COVER 1.980
AXLE MOUNT KIT, CHANNEL
AXLE MOUNT KIT, TUBE
HUB ASSEMBLY, 1-3/8 X 1-1/16" BOXED
AMBER SIDE MARKER - M114A
RED SIDE MARKER - M114R
5/8" SHAFT FOR 5" ROLLER
PIVOT "L" BRACKET W/HARDWARE (PAIR)
9" BUNK BRACKET WITH PIVOT "L"
12" BUNK BRACKET WITH PIVOT "L"
12" UPRIGHT BUNK BRACKET WITH HARDWARE (EACH)
SIDE GUIDE KIT, NARROW
ECONOMY GUIDE BOARD KIT WIDE
SPRING HANGER WELD-ON RAW (EACH)
SPRING SLIP COLLAR WELD-ON RAW (EACH)
3" CHANNEL U-BOLT KIT
4" CHANNEL U-BOLT KIT
GALVANIZED U-BOLT KIT 7/16X3-1/16X2-13/16
STAR WASHER 7/16" (10)
AXLE NUT/WASHER/COTTER PIN 3/4"
AXLE NUT/WASHER/COTTER PIN 1"
NOTES
44
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
AXLE
WORKSHEET
45
PLEASE FAX TO: 727-535-6267
NAME OF COMPANY:
COMPANY ADDRESS:
TELEPHONE NUMBER:
THE ANSWERS TO THE FOLLOWING QUESTIONS WILL
PROVIDE THE INFORMATION WE NEED TO BUILD YOUR AXLE
IS THIS AXLE FOR A MAGIC TILT TRAILER? YES OR NO
IF SO: TRAILER MODEL NO. ___________________ VIN NO.:
AXLE QTY:___________
A.)
B.)
C.)
D.)
E.)
F.)
SPINDLE SIZE {OUTER AND INNER BEARING NUMBERS}.
CHOOSE ONE: 1 1/16" X 1 1/16" OR 1 1/16" X 1 3/8" OR 1 1/4" X 1 3/4"
STANDARD SPINDLE OR POSI-LUBE SPINDLE________________________
OVERALL LENGTH.______________________
LEAF SPRING CENTER TO LEAF SPRING CENTER._____________________
HUB FACE TO HUB FACE/CENTER OF TREAD TO CENTER OF TREAD._________________
MATERIAL USED TO BUILD AXLE CHOOSE ONE: 1 1/2" X 1 1/2" or 2" X 2" or 2" X 3"
WHETHER THE SPRING SITS ON TOP OF OR UNDER THE AXLE. (PICTURED BELOW)____________
UNDER
TOP
OR
G.)
H.)
STRAIGHT OR BENT AXLE TUBING.____________________
I.) LUG PATTERN
HUB STYLE.
4 LUG_______
NO HUBS____________
DISC BRAKES______________
5 LUG_______
DRUM BRAKES_____________
6 LUG_______
LIGHT DUTY__________
8 LUG_______
HEAVY DUTY_________
BEARING PROTECTORS OR DUST CAPS___________________
DISCLAIMER: Custom manufactured axles, defined as axles for non Magic Tilt trailers, are built to customers'
specifications as detailed on this worksheet. Custom axles are neither returnable nor refundable
when accurately built to customer's specifications.
CAUTION: Magic Tilt axle and brake components may not be compatible with other trailer manufacturers' axle and
brake components. Please ask your Magic Tilt sales representative about potential incompatibility
issues prior to placing an order. Magic Tilt will not be responsible for any axle or brake component
compatibility problems with components from another manufacturer.
46
Torsion Axle
Order Form
PLEASE FAX TO: 727-535-6267
NAME OF COMPANY:_______________________________
CUSTOMER NUMBER:____________
COMPANY ADDRESS:________________________________________________________________
CITY:_____________________________STATE:________________________
ZIP:____________
TELEPHONE NUMBER:_________________________________FAX NUMBER:__________________
IS THIS AXLE FOR A MAGIC TILT TRAILER?
YES OR NO
IF SO: TRAILER MODEL NO.: __________________ VIN #:_________________________________
AXLE QTY:___________
3500# (3" X 3")
5200# (3 1/2" X 3 1/2")
7000# (4"X4")
1.) Axle Capacity (Please circle one):
2.)
BEAM TYPE (Select one):
Straight____________
5 LUG
6 OR 8 LUG
8 LUG
Drop__________ (Standard Is 3")
3.) Provide the following measurements:
a. Hub face/Track________________
c. Outside frame width_______________
b. Mounting bracket holes (Center to Center):_______________________
10° DOWN
22.5° DOWN
25° DOWN
35° DOWN
45° DOWN
15° UP
0°
4.)
5.)
a.
b.
1
2
Select torsion arm degree, (circle one):
10°
22.5°
15° UP
0°
Available Options:
Spindle only__________
Hubs
Without Hubs__________
With Hubs____________
25°
35°
45°
c. Brakes
1 Drum Brakes____________
2 Disc Brakes___________
6.) Mounting Holes: Inside of I-Beam OR Outside of I-Beam_________________
DISCLAIMER: Custom manufactured axles, defined as axles for non Magic Tilt manufactured trailers, are built to customers'
specifications as detailed on this worksheet. Custom axles are neither returnable nor refundable when
accurately built to customers' specifications.
CAUTION: Magic Tilt axle and brake components may not be compatible with other trailer manufacturers' axle and brake
components. Please ask your Magic Tilt sales representative about potential incompatibility issues prior to placing
an order. Magic Tilt will not be responsible for any axle or brake component compatibility problems with
components from another manufacturer.
Item :
8
6
7
4
5
0.00
Warranty Approval Number :
Total Parts :
Grand Total :
2
3
Warranty Parts Required
Total Labor :
Qty. :
Dealer's Name :
Address :
City, State, Zip :
Description of Failure
per hour ( Maximum )
Date of Claim:
DEALER RO #:
Phone # :
Requested by:
1
Labor Rate :
R/O Number:
warranty@magictilt.com
Parts Dept Fax: (727) 535-6267
PREAPPROVAL NUMBER:
Trailer VIN Number
$0.00
$0.00
$0.00
Hours
Warranty Claim Form
47
2
MagicTilt Trailers
2161 LIONS CLUB ROAD, CLEARWATER, FL 33764
(727) 535-5561 (800) 998-TILT (8458) FAX (727) 539-8472
WWW.MAGICTILT.COM
©2011, Magic Tilt Trailers, Inc. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, without the express written permission of Magic Tilt Trailers, Inc.

parts catalog 2012-2013

Transcription

Similar documents