(Microsoft PowerPoint - GPS-5 [\310\243\310\257 \270\360\265\345])

GPS 5 panel
USER MANUAL
Please read this manual before operating your units
and keep it for future reference.
VRinsight
Virtual Reality Insight
All stated here is subject to change without advanced notice for improvement.
Tel : +82-31-284-7090~91 Fax : +82-31-284-7092 E-mail : tech@vrinsight.com Web site : www.vrinsight.com
1
BEFORE USE : Thanks for purchasing VRi’s GPS-5.
Before operating your units, please read through this manual and keep it for future reference.
For any further question, visit www.wilcopub.com or contact us below:
Fax : +32-2-33107 51
E-mail (Support team) : info@wilcopub.com
NOTE : This manual could be redistributed unless you modify the contents.
This manual has been written out on a GPS-5 basis.
All software (& software versions) stated here is subject to change without advanced notice
for improvement.
If you want to download the latest driver version for panel & application
programs, visit www.vrinsight.com
2
VRinsight GPS-5
The GPS-5 of VRinsight features Control Display Unit for providing terrain information
and for warning terrain hazard of potential conflicts. It is the most fundamental
approach guide into the airports inaccessible in IFR conditions.
Real shape & full functionality of GPS-5 supports all default aircrafts & add-on
aircrafts. It is completely interfaced with MSFS9 and MSFSX through interfacing
application software “VRiSim” (supplied).
Requires USB 2.0 port , unregistered FSUIPC and a free DVI or VGA port
• Standalone type
• VRiSim software supports all functions to GPS-5.
• If you want to use a USB hub, be sure that the USB hub is USB 2.0 compliant.
Otherwise it may cause a malfunction.
• Available in Window mode only.
3
Features
• Realistically shaped and fully functional buttons, dual knob and LCD
• LCD size : 15cm (L) X 8.8cm (W) / 7 inch
• Fully metal cases
• Standalone type
• Available in Window mode only
• One year warranty
Technical specifications
• USB interface type to computer
• External power requirement ; DC 12V adaptor (Included in package)
• Video port requirement : One DVI or VGA video port
• 19 cm (L) x 14 cm (W) x 14 cm (H)
• 1.3Kg
Compatibility software
• Flight Simulator 2004 / FSX by Microsoft
Operating software
• VRiSim
4
BEFORE USE
Before use GPS-5, please check below procedures.
VRiSim Installation
In the GPS-5 package, one “Install DVD” is included. When you insert it in DVD driver of your
computer, “VRinsight HTML” document will be shown. Then click “VRiSim” (operating software)
and install it at a proper folder.
“VRiSim” is the main operating software of VRinsight used for all VRinsight flight panels.
VRiSim software supports all functions of GPS-5 and completely interfaced with MSFS9 and MSFSX
enables full simulation with simple connection your computer through USB.
Be sure that when installing VRiSim, “Install USB-Serial Driver” must be checked.
After installation, you can find “SeiralFP2” in “All programs” of “Start menu”.
USB Connection
The connection between GPS-5 and your computer is made using a USB cable that plugs into one
USB port on your computer. If you want to use a USB hub, be sure that the USB hub is USB 2.0
compliant. Otherwise it may cause a malfunction.
When you connect GPS-5 to your computer at first, your computer will detect it and will describe
the process step by step.
Power Connection
Power supplying of GPS-5 panel is done by universal power supply adaptor DC 12V (Included in
package).
Video Connection
The connection between GPS-5 and your computer is made using DVI or VGA cable.
Run “VRiSim”
When you confirm all setup processes done; “VRiSim” installation, “USB connection”, “Video
Connect” and “Power connection”, you are ready to operate GPS-5.
5
Monitor setting
1. Check the current display properties in order that another sub monitor is connected or not.
(See “Settings”)
2. Connect video cable of GPS-5 to your computer.
3. Connect AC/DC adaptor to your GPS-5.
4. Check the display properties in order that GPS-5 monitor is detected or not.
6
* If the GPS-5 monitor (=Monitor 2) isn’t detected, check the connection of video
cable & AC/DC adaptor.
* If your OS is VISTA, please restart your computer.
5. When the GPS-5 monitor is recognized, click monitor 2(=GPS-5 monitor).
6. Adjust the resolution for GPS-5 monitor.
(Recommended resolution is 1280 * 768 / 800 * 600).
7. Check the position of the monitor 2 :
8. Move the monitor 2 to the left side of monitor 1 (position is changeable)
9. Check “Extend my Windows desktop onto this monitor”.
7
* If GPS-5 monitor doesn’t illuminate, restart your computer.
10. Click “Apply” and click “OK”
11. If everything is done properly, GPS-5 will be power on.
12. Multiple display & Monitor rotation setting
12-A. NVIDIA
12-A-1. Launch “NVIDIA Control Panel”.
12-A-2. Go to “Set up multiple displays and check “Configured independently
from each other (Dualview). Then the monitor of GPS-5 will independently
display your “Desktop” view.
8
12-B. ATI
12-B-1. Launch “Catalyst(TM) Control Center”.
The monitor of GPS-5 will automatically display your “Desktop” view.
12-B-2. Go to “Displays Properties” and select monitor 2.
9
GPS-5 controls explanation
LCD display : Shows all information about GPS-5
Buttons : Buttons are used to input & assign the data and enter
the pages
Buttons : Programmable button
Dual knob : Input alphabet & number
10
RNG+
Allows the pilot to select the desired map
range. Use the up arrow to zoom out to a larger area, or
the down arrow to zoom in to a smaller area
RNG-
DIR
Provides access to the direct-to function, which allows the
pilot to enter a destination waypoint and establishes a direct
course to the selected Destination.
MENU
Displays a context-sensitive list of options. This options list
allows the pilot to access additional features or make settings
changes which relate to the currently displayed page.
CLR
Used to erase information, remove map detail, or to cancel an
entry. Press and hold the CLR Key to immediately display the
Default NAV Page
ENT
Used to approve an operation or complete data entry. It is
also used to confirm information during power on
NRST
The NRST Key displays the Nearest Airports Page. Then,
turning the small right knob steps through the NRST pages
OBS
Used to select manual or automatic sequencing of
waypoints. Pressing the OBS Key selects OBS mode, which
retains the current ‘active to’ waypoint as the navigation
reference even after passing the waypoint (i.e., prevents
sequencing to the next waypoint). Pressing the OBS Key
again returns the unit to normal operation, with automatic
sequencing of waypoints. When OBS mode is selected, the
pilot may set the desired course to/from a waypoint using
the Select OBS Course pop-up window, or an external OBS
selector on the HSI or CDI.
MSG
Used to view system messages and to alert the pilot to
important warnings and requirements
FPL
Allows the pilot to create, edit, activate, and invert flight plans,
as well as access approaches, departures, and arrivals. A
closest point to flight plan feature is also available from the
FPL Key
11
TERR
Allows the pilot to create a three-dimensional profile which
provides guidance to a final (target) altitude at a specified
location
PROC
Allows the pilot to select and remove
approaches, departures, and arrivals from the flight plan.
When using a flight plan, available procedures for the
departure and/or arrival airport are offered automatically.
Otherwise, the pilot may select the desired airport, then
the desired procedure
Used to select pages within one of the page groups. Press
this knob momentarily to display the on-screen cursor. The
cursor allows the pilot to enter data and/or make a selection
from a list of options. When entering data, the small right
knob is used to select the desired letter or number and the
large right knob is used to move to the next character space.
The small right knob is also used to move the target pointer
up (turn clockwise) or down (counterclockwise) when the
map panning function is active.
Used to select page groups: NAV,WPT, AUX, or NRST. With
the on-screen cursor enabled, the large right knob allows the
pilot to move the cursor about the page. The large right knob
is also used to move the target pointer right (turn clockwise)
or left (counterclockwise) when the map panning function is
active.
User programmable
12
Software Installation
Driver and application software “VRiSim” is installed to make GPS-5 work in the PC.
VRiSim is application software managing VRInsight's flight simulation hardware panels. Multiple
hardware panels can be used with single instance of VRiSim. To reduce distributing file size, software
installer is supplied as divided package; base-package and device specific module package. The
base-package installs only VRiSim and Panel Installer utility.
Installer executable is divided into base package and device specific modules. VRiSim is included in
the base-package setup installer, "Install_VRiSim.exe".
Base-Package Installer:
The base-package installer can be found in the supplied DVD,
\VRiSim\Install_VRiSim.exe
Device Specific Module Package Installer
The GPS-5 module installer can be found in the supplied DVD,
\VRiSim\Install_GPS-5
Or downloaded at VRInsight's web-page, http://www.vrinsight.com
NOTE: Software installation is explained “VRiSim.pdf”. You can find this document file at program
folder of “VRinsight”
Quick Start
VRiSim is new software developed for interfacing VRinsight’s hardware unit to Microsoft’s Flight
Simulator. After installation of software, a short-cut icon will be created on your desk-top;
VRiSim.
Running VRiSim
Double-click “VRiSim” short-cut icon to run. “VRiSim” search all VRinsight hardware units and list up
founded device(s). Device searching process could be taken several minutes. Following image is
showing that two device, MCP Combo II and GPS-5 are found and listed by “VRiSim” software.
“VRiSim” manages multiple devices.
13
Select Aircraft
Open device’s tab to select “Aircraft”.
Fly Now!
As the aircrafts are specified to fly with VRi’s unit, press “Fly Now!” button. Remember that Flight
Simulator should be running and you are in-cockpit before pressing this button. Otherwise, you will
see following message.
14
Preparing GPS-5 before Flight (With Cessna 172)
Step 1 : Initial check up
Before flight with GPS-5, please check the followings are done
A. Install of VRiSim.
* Check that “Install USB-Serial Driver” is checked or not.
B. Confirm the USB connection.
* Check that the USB port of your computer is dead or not
* Check that if you use USB hub, be sure that the USB hub is USB 2.0 compliant.
C. Confirm DC 12V adaptor is plugged in.
D. Confirm the DVI or VGA connection.
E Confirm the monitor setting. (See page no. 7)
F. Confirm that “Panel Installer” is executed or not.
Step 2 : Run flight simulator (MSFS9 / MSFSX)
A. Run flight simulator (MSFS9 / MSFSX).
B. Select Cessna 172.
Step 3 : Click “Views” => “Instrument Panel” => GPS.
When “GPS” window is shown, undock it.
15
Step 4 : Run panel linking application software “VRiSim”.
Step 5. Press “Load FS Module” to move undocked GPS display to GPS-5.
Step 6. Input the X & Y position and size of GPS-5 monitor and press “Redraw”.
* For instance,
If X & Y position is same as
page 7,
Put X=1680, Y=0.
If X & Y size is same as page 7,
Put W=768, Y=1280.
16
Step 7. Confirm the GPS display has been moved to GPS-5. Then press “Save” for future purpose. With
“Panel Config” window, you can adjust position and size of the display. See how to control them.
X, Y
Current position of gauges display window
++ U
Moves gauges display window to up
++ D
Moves gauges display window to down
++ L
Moves gauges display window to left
++ R
Moves gauges display window to right
W, H
Current size of gauges display window
++ H
Expands in up & lower gauges shape
-- H
Reduces in up & lower gauges shape
++ W
Expands in left & right gauges shape
-- W
Reduces in left & right gauges shape
Redraw
Save
Execute current settings
Save all settings.
17
Appendix : ATC menu
* To use ATC menu, VRiSim (Version 2010 Sept. 18) should be installed.
This document describes new features for VRinsight’s GPS-5 panel.
Newly designed GPS gauge is supplied. The gauge file is named “vri_gps5.cab” which is copied to
MSFS “Gauges” folder during “Panel Installer” configuration.
Redesigned GPS-5 Gauge
Dual Function
Additional function is added to GPS-5 Panel. By pressing user button the GPS-5 is switched
between GPS and additional function. “ATC Menu” is implemented as an additional feature.
CAUTION: As the GPS-5 has the feature of dual function, both “GPS gauge” and “ATC Menu”
window must be opened and undocked before “Load FS Module” in the VRiSim.
Step 1. Click “Views” => “Instrument Panel” => GPS.
Step 2. Click “Views” => Air Traffic Control.
Step 3. Undock “GPS” & “ATC menu” window
18
Step 4. Run VRiSim and match the aircraft.
Step 5. Click “Load FS Module”
Step 6. Input the X & Y position and size of GPS-5 monitor and press “Redraw”.
Step 7. Press “user button” to shift the window.
19