HYDRA-TRAC® - Drillers` Choice, Inc.

®
HYDRAULIC TRACK DRILL
R30C
HYDRA-TRAC ®
More reach. More Profit.
The industry-leading pattern-coverage capabilities of the new Terex® Reedrill R30C result in
significant cost and time savings for your drilling operation. With the new R30C’s ability to drill
three and even four holes per set-up before having to tram and reposition, operators can reach
drilling deadlines much faster. This translates into greater profit.
More reach is achieved thanks to the 5 foot (1,524 mm) boom. The boom and the swing radius
provides huge pattern-coverage, twice the coverage of other drills in the industry.
R30C Drilling Coverage (7x8)
2
2
Copyright 200x Terex Corporation
R30C Drilling Coverage (8x9)
The R30C features many improvements for increased
comfort, convenience, and outstanding performance.
The industry’s only field serviceable Rock Drills.
The heart of any top-hammer machine is the rock drill, and the R30C is certainly no exception. The renowned Terex®
Reedrill HPR Series of rock drills are used in a multitude of applications. The simple design—with the fewest internal
parts of any drill in the industry—reduces internal wear and allows easy field service, resulting in optimum uptime and
increased revenue.
HPR Rock Drills have a simple design, fewer parts, and more performance.
Other benefits and features of the Terex® Reedrill HPR series rock drill are:
• A proven oscillator valve design
Simple and very efficient; requires no new training for a service technician familiar with
Terex® equipment
• Oversized energy storage accumulators
Protect the drill valve cycle from energy spiking, add to the longevity of the parts and are
a source of reusable energy during the percussion cycle
• Highly efficient energy transfer between hammer and striking bar
Avoids issues that arise when the diameter of the striking face of the hammer does not match the face of the shank, which causes one or the other to prematurely wear or fail;
a mismatch also creates heat in the oscillator, reducing the life of major components
• Longer life as a result of major supporting bushings made
of high-strength alloy
The alloy has many of the same properties of heat-treated material, including high surface strength that extends the life of standard metals and component life, therefore
reducing operating costs.
The new Terex® Reedrill R30C sports the HPR4519 (19kW output power) rock drill as standard, with the higher energy
HPR5123 (23kW output power) available as an option. Either drill accepts 45 mm or 51 mm drill steel.
Additional exterior and performance features
The new R30C offers a wealth of new benefits that make it stand out in a crowded field of track drills. Bragging rights
belong to the Terex Reedrill SmartDrill drilling system, which uses anti-jam, anti-plug and anti-plunge features to lengthen
drill-string life and has proven to increase overall production. The new R30C features a powerful Tier III C-9 engine.
From top to bottom, inside and out, the new Terex® Reedrill R30C has been designed to get you drilling fast—and to
keep you drilling longer.
Interior features
The innovative features of the new R30C continue inside
as well, starting with a large cab that’s operator-friendly.
Several enhancements that make it inviting to operators include:
•
Comfortable operator’s seat and ample leg room that
promote productivity
•
Armchair joystick controls allow for comfortable operation
throughout long shifts
•
Excellent visibility enables fast set-up time, which
increases productivity
•
ROPS/FOPS-certified cab
Copyright 200x Terex Corporation
33
Terex® Reedrill R30C Self-Contained Hydraulic Track Drill
General Specifications
Hole Diameter
Up to 5 inches
Up to 127 mm
Weight
43,400 lbs
19,727
Overall width
102 inches
2,590 mm
Overall height
123 inches
3,124 mm
Model & KW HPR4519
25hp
19kW
Weight
660 lbs
300 kg
Number of blows
2,500-2,700 bpm
2,500-2,700 bpm
Number of revolutions
0-300 rpm
0-300 rpm
Optional HPR5123 30 hp
23 kW
15 inches 380 mm
Tramming speed 2.4 mph
4 kph
Gradeability 35 degrees 35 degrees
Track Pad Width
15.1 inches
380 mm
Model CAT
Tier III C-9
Tier III C-9
Max. starter rod, standard
240 inches
5,485/4,267 mm
Speed
1,800 rpm
1,800 rpm
Max. single pass, optional
222 inches 5,639 mm
Fuel Capacity
130 gal
492 I
Feed rate
120 ft/min
37m/min
Rated Output
300 hp
223 kW
Model
Gardner Denver
Gardner Denver
Type of Pump
piston
piston
Free air delivery maximum
350 cfm
8.2m3/min
Reservoir capacity
107 gal
405 I
Working pressure
150 psig
10 bar
Boom
Boom length
150 inches
3,810 mm
Number of rods x length
5 rods, 12 or 14 ft
5 rods, 3,658 or 4,267 mm
Boom sing angle
70 L, 33 R deg
70 L, 33 R deg
Cab noise level less than
80 dBa
80 dBa
Boom extension
60 inches
1,524 mm
Drifter
Tramming
Ground Clearance
Guide Shell
Compressor
Diesel Engine
Hydraulic System
Rod Changer
Effective Date: October 2008. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in
this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to
follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only
warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty,
expressed or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the
USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries.
Copyright 2008 Terex Corporation.
Terex Mining
5601 Granite Parkway, Suite 500, Plano, TX 75024, U.S.A.
Tel +1 (972) 265-7100 Fax +1 (972) 265-7190
sales@terexmining.com www.terexmining.com