1316C VDI Tool Holders for Hardinge Machines

Transcription

1316C VDI Tool Holders for Hardinge Machines
VDI Tool Holders
for Hardinge® Machines
QUEST® 6/42, 8/51 and
10/65 CNC Lathes
ELITE™ 8/51 CNC Lathes
QUEST® TWINTURN® 65
CNC Turning Centers
HARDINGE-EMAG VL3/VL5
Vertical CNC Lathes
In USA, call: 800-843-8801
In Canada, call: 800-468-5946
Other, call: 607-734-2281
Fax: 607-734-8819
Corporate Headquarters and
Manufacturing Facilities
Hardinge Inc.
Brochure 1316C
Part No. C C-0009500-1316
January 2003
Elmira, New York 14902-1507 USA
Phone: 607-734-2281 • E-mail: info@hardinge.com
Internet: www.hardinge.com
© Hardinge Inc., 2003
VDI Toolholders
Hardinge Lathes
Page 2
VDI Turret Tooling System – QUEST® 6/42, 8/51 & 10/65
Turret Top Plate
VDI 30 Round Shank Tool Holders
3/4" or
20mm
Right-Hand,
2-Hole
3/4" or
20mm
Left-Hand,
2-Hole
1-1/4" or
32mm
Right-Hand,
Long Offset
1-1/4" or
32mm
Right-Hand
Offset
1-1/4" or
32mm
Left-Hand,
Long Offset
1-1/4" or
32mm
Left-Hand
Offset
3/4", 1",
1-1/4", 1-1/2"
20mm, 25mm,
32mm or
40mm Long
3/4", 1",
1-1/4", 1-1/2"
20mm, 25mm,
32mm or
40mm
A
B
19
A
B
B
A
19
18
18
18
18
Square Shank Tool Holders
3/4" / 1" or
20/25mm
Double
3/4" or
20mm
Double
C
C
11
Plug
17 20
12
20
12
20
Double or
Double
Long (shown)
Reversible
(shown) or
Reversible
Long
C
D
A
B
17 20
ER25 Collet Tool Holders
3/4", 1"
20 or 25mm
Left-Hand
3/4", 1"
20 or 25mm
Right-Hand
C
C
11
6 10
6 10
13
23
22
12
12
7
12
7
12
13
12
24
12
24
ER11 and ER20 Collet
Angular Adjustable
Tool Holders
ER25 Collet Driven Tool Holders
Cross Mill/Drill
Int. Coolant or
Ext. Coolant
End Mill/Drill
Right-Hand
Int. Coolant or
Ext. Coolant
C
End Mill/Drill
Left-Hand
Int. Coolant or
Ext. Coolant
End Mill/Drill
Double
Spindle
A
B
Cut-Off
Tool Holder
Cut-Off
A
13
Reversible
Polygon Turning
Driven Tool Holder
C
D
D
34
32
27
27
12
25
12
27
12
27
- VDI 40 Page Numbers
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
37
A - Used for machining on the main spindle
B - Used for machining on sub-spindle option only
C - Used for machining on both or either spindle
D - Used for machining on either spindle
- VDI 30 Page Numbers
Call 800-843-8801
33
(millimeters shown in parentheses)
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI 40 Turret Tooling System – Hardinge-EMAG VL3/VL5
VDI Toolholders
Hardinge Lathes
Page 3
VDI 40 Square Shank Tool Holders
1" or
25mm
Double
1" or
25mm
Radial/Axial
1" or
25mm
Radial, Left-Hand
1" or
25mm
Axial, Right-Hand
1" or
25mm
Axial, Left-Hand
Plug
12
8
7
7
7
13
ER32 Collet Tool Holders
Round Shank Tool Holders
Round Shank
Internal Coolant
Round Shank
External Coolant
Round Shank
Internal Coolant
21
14
15
ER32 Collet Driven Tool Holders
End Mill/Drill
Internal/External
Coolant
End Mill/Drill
External Coolant
25
25
Cross Mill/Drill
External Coolant
Cross Mill/Drill
Internal/External
Coolant
26
26
- Page Numbers
Turret
(12-Station)
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 4
VDI 30 Turret Tooling System – QUEST® TwinTurn® 65
VDI 30 Round Shank Tool Holders
3/4" or
20mm
Right-Hand,
2-Hole
3/4" or
20mm
Left-Hand,
2-Hole
19
1-1/4" or
32mm
Right-Hand,
Long Offset
19
1-1/4" or
32mm
Right-Hand
Offset
18
1-1/4" or
32mm
Left-Hand,
Long Offset
18
18
Square Shank Tool Holders
3/4" or
20mm
Double
3/4" or
20mm
Right-Hand
Y-Axis
3/4" or
20mm
Right-Hand
11
9
6
ER11 Collet Angular
Adjustable Tool Holder
3/4" or
20mm
Left-Hand
18
9
Plug
17
17
1/2" or
12mm
Y-Axis
16
Miscellaneous
Tool Holders
Reversible or
Reversible Long
Gripper for
Part
A, B
Catcher
Cut-Off
23
22
21
13
A, C
13
ER25 Collet Driven Tool Holders
Cross Mill/Drill
Int. Coolant or
Ext. Coolant
36
3/4", 1",
1-1/4",
20mm,
25mm or
32mm
Double or
Double Long
ER20 Collet Angular
Adjustable Tool Holder
34
3/4", 1",
1-1/4",
20mm,
25mm or
32mm Long
ER25 Collet Tool Holders
3/4" or
20mm
Left-Hand
Y-Axis
6
1-1/4" or
32mm
Left-Hand
Offset
End Mill/Drill
Right-Hand
Int. Coolant or
Ext. Coolant
31
29 30
End Mill/Drill
Left-Hand
Int. Coolant or
Ext. Coolant
29 30
End Mill/Drill
Double Spindle
Ext. Coolant
33
A - Shown positioned 90-degrees clockwise for clarity
B - Used on lower turret only
C - Used on upper turret only
- Page Numbers
Upper Turret
(10- or 12-Station)
Lower Turret
(10- or 12-Station)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 5
™
VDI 30 Turret Tooling System – ELITE 8/51
Turret Top Plate
VDI 30 Round Shank Tool Holders
3/4" or
20mm
Left-Hand,
2-Hole
19
1-1/4" or
32mm
Left-Hand
Offset
1-1/4" or
32mm
Left-Hand,
Long Offset
18
18
ER16 Collet
Angular Adjustable
Tool Holder
Square Shank
Tool Holders
3/4", 1"
20 or 25mm
Left-Hand
Plug
6
13
35
ER25 Collet
Tool Holders
3/4", 1",
1-1/4", 1-1/2"
20mm, 25mm,
32mm or
40mm Long
3/4", 1",
1-1/4", 1-1/2"
20mm, 25mm,
32mm or
40mm
Reversible
(shown) or
Reversible
Long
17
17
22
ER25 Collet Driven Tool Holders
Cross Mill/Drill
Ext. Coolant
End Mill/Drill
Left-Hand
Int./Ext. Coolant
32
28
Polygon Turning
Driven Tool Holder
37
- Page Numbers
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 6
Square Shank Tool Holders: Left- & Right-hand
L
H1
H
D
S
CW
CW1
CH
T
CH1
Left-Hand Toolholder Shown
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
Right-Hand Mirror Image
Tool
Shank
Shank
Dia.
Length
Height
Style
LH
T
.750"
(19.05)
.750"
(19.05)
.787"
(20)
.787"
(20)
D
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
L
2.559"
(65)
2.559"
(65)
2.559"
(65)
2.559"
(65)
X X
Part Number
X TTA-0011944-01
X X
TTA-0011944-02
RH
X X
X TTA-0011944-03
LH
X X
TTA-0011944-04
RH
Center
Width
H
2.992"
(76)
2.992"
(76)
2.992"
(76)
2.992"
(76)
H1
1.654"
(42)
1.654"
(42)
1.654"
(42)
1.654"
(42)
Center
Height
CW
1.654"
(42)
1.654"
(42)
1.654"
(42)
1.654"
(42)
CW1
1.339"
(34)
1.339"
(34)
1.339"
(34)
1.339"
(34)
Shoulder
CH
1.358"
(35)
1.358"
(35)
1.358"
(35)
1.358"
(35)
CH1
2.756"
(70)
2.756"
(70)
2.756"
(70)
2.756"
(70)
S
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 7
Square Shank Tool Holders
Axial Turning
L
W
W1
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
15°
*
L1
L2
W2
H2
H1
.079"
2mm
D
H3
T2 T
H
T1
15°
.315"
8mm
Left-Hand Toolholder Shown
Right-Hand Mirror Image
Tool
Shank
Shank
Dia.
Length
Width
Height
Part Number Style T
T1
T2
D
L
L1
L2
W
W1 W2
H
H1
X X HE-3938057-E LH 1.000" — 1.339" 1.574" 3.346" 1.181" .492" 3.543" 1.870" 1.004" 1.889" 1.280"
(25.4)
(34)
(40)
(85)
(30) (12.5) (90) (47.5) (25.5) (48) (32.5)
X X HE-3938057
LH .984" .787" 1.339" 1.574" 3.346" 1.181" .492" 3.543" 1.870" 1.004" 1.889" 1.280"
(25)
(20)
(34)
(40)
(85)
(30) (12.5) (90) (47.5) (25.5) (48) (32.5)
X
HE-3938057-ER RH 1.000" — 1.339" 1.574" 3.346" 1.181" .492" 3.346" 1.673" .807" 1.889" 1.280"
(25.4)
(34)
(40)
(85)
(30) (12.5) (85) (42.5) (20.5) (48) (32.5)
H2
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
H3
2.657"
(67.5)
2.657"
(67.5)
2.657"
(67.5)
* Two shims included with each tool holder.
Axial Turning—Inverted
.315"
8mm
15°
H
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
T2
T
.079"
2mm
H3
H2
D
H1
W2
W1
L2
15°
L1
L
W
Left-Hand Toolholder Shown
Right-Hand Mirror Image
Tool
Shank
Part Number Style T
X X QC-3938057-14 LH 1.000"
(25.4)
X
QC-3938057-13 RH 1.000"
(25.4)
Shank
Dia.
Length
T1
—
—
Width
Height
T2
D
L
L1
L2
W
W1
1.339" 1.574" 3.346" 1.181" .492" 3.543" 1.870"
(34)
(40)
(85)
(30) (12.5) (90) (47.5)
1.339" 1.574" 3.346" 1.181" .492" 3.346" 1.673"
(34)
(40)
(85)
(30) (12.5) (85) (42.5)
W2
H
H1
H2
H3
1.004" 1.889" 1.280" 1.280" 2.657"
(25.5) (48) (32.5) (32.5) (67.5)
.807" 1.889" 1.280" 1.280" 2.657"
(20.5) (48) (32.5) (32.5) (67.5)
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 8
Square Shank Tool Holders
Radial Turning—Left Hand
W
CW
L
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
S
*
15°
H3
H1
H4
H2
H
L1
D
T2 T
T1
15°
Tool
Shank
Shank
Dia.
Length
Width
Center
Width
Height
Step
Part Number
T
T1
T2
D
L
L1
W
CW
H
H1
H2
H3
H4
S
X HE-3938032-E 1.000" — 1.339" 1.574" 1.732" .866" 3.346" 1.673" 1.889" 1.280" .079" 1.378" 2.756" .492"
(25.4)
(34)
(40)
(44)
(22)
(85) (42.5) (48) (32.5)
(2)
(35)
(70) (12.5)
X HE-3938032 .984" .787" 1.339" 1.574" 1.732" .866" 3.346" 1.673" 1.889" 1.280" .079" 1.378" 2.756" .492"
(25) (20) (34)
(40)
(44)
(22)
(85) (42.5) (48) (32.5)
(2)
(35)
(70) (12.5)
* Two shims included with each tool holder.
Radial/Axial Turning
L
H1
H
L1
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
T
W
D
Left-Hand Toolholder Shown
Right-Hand Mirror Image
Tool
Shank
Shank
Dia.
Length
Style
T
D
L
L1
W
H
H1
X HE-3938065-E
LH
X HE-3938065
LH
X HE-3938065-ER
RH
1.000"
(25.4)
.984"
(25)
1.000"
(25.4)
1.574"
(40)
1.574"
(40)
1.574"
(40)
3.937"
(100)
3.937"
(100)
3.937"
(100)
.866"
(22)
.866"
(22)
.866"
(22)
3.543"
(90)
3.543"
(90)
3.543"
(90)
1.889"
(48)
1.889"
(48)
1.889"
(48)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
Part Number
Width
Height
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 9
Square Shank Tool Holders: Left- & Right-hand Y-Axis
L
H1
H
D
S
CW
CW1
CH
CH1
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
T
X
X
X
X
Left-Hand Toolholder Shown
Right-Hand Mirror Image
Tool
Shank
Part Number
Style T
TTA-0011944-01Y LH .750"
(19.05)
TTA-0011944-02Y RH .750"
(19.05)
TTA-0011944-03Y LH .787"
(20)
TTA-0011944-04Y RH .787"
(20)
Shank
Dia.
Length
Height
D
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
L
1.772"
(45)
1.772"
(45)
1.772"
(45)
1.772"
(45)
H
2.992"
(76)
2.992"
(76)
2.992"
(76)
2.992"
(76)
Center
Width
H1
1.654"
(42)
1.654"
(42)
1.654"
(42)
1.654"
(42)
CW
1.654"
(42)
1.654"
(42)
1.654"
(42)
1.654"
(42)
Center
Height
CW1
1.339"
(34)
1.339"
(34)
1.339"
(34)
1.339"
(34)
CH
1.358"
(35)
1.358"
(35)
1.358"
(35)
1.358"
(35)
Shoulder
CH1
2.756"
(70)
2.756"
(70)
2.756"
(70)
2.756"
(70)
S
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 10
Square Shank Tool Holders: Left- & Right-hand
D
H
T
H2
H1
11.25°
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
W
L
W1
Left-Hand Toolholder Shown
Right-Hand Mirror Image
Tool
Shank
X
Part Number
X QC-0011944-01L
X
X QC-0011944-02L
X
QC-0011944-01R
X
QC-0011944-02R
Style
T
LH 1.000"
(25.4)
LH .984"
(25)
RH 1.000"
(25.4)
RH .984"
(25)
Shank
Dia.
Length
Height
D
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
L
2.756"
(70)
2.756"
(70)
2.756"
(70)
2.756"
(70)
H
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
Width
H1
1.890"
(48)
1.890"
(48)
1.890"
(48)
1.890"
(48)
H2
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
W
1.811"
(46)
1.811"
(46)
1.811"
(46)
1.811"
(46)
W1
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 11
Square Shank Tool Holders: Double
L
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
D
X X
X X
CW1
CW
T
H
CH
Tool
Shank
Shank
Dia.
Part Number Style T
TTA-0011944-05 DBL .750"
(19.05)
TTA-0011944-06 DBL .787"
(20)
Length
Center
Width
Height
Center
Height
D
L
H
CW CW1
CH
1.181" 2.559" 2.756" 1.654" 3.308" 1.358"
(30)
(65)
(75)
(42)
(84)
(35)
1.181" 2.559" 2.756" 1.654" 3.308" 1.358"
(30)
(65)
(75)
(42)
(84)
(35)
CW2
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
CW CW1
X
X
D
11.25°
H1
H2
T2
T
H3
T3
T1
H
CW3
Tool
Shank
Part Number
T
T1
QC-0011944-01D 2.000" 1.000"
(50.8) (25.4)
QC-0011944-02D 1.968" .984"
(50) (25)
L
CW4
Shank
Dia.
Height
Center
Width
T2
T3
D
H
H1
H2
H3
CW CW1 CW2 CW3 CW4
1.500" .750" 1.181" 3.778" 1.889" 1.358" 2.716" 4.880" 1.579" .787" 1.653" 1.653"
(38.1) (19.05) (30)
(96)
(48) (34.5) (69) (124) (40)
(20)
(42)
(42)
1.574" .787" 1.181" 3.778" 1.889" 1.358" 2.716" 4.880" 1.579" .787" 1.653" 1.653"
(40)
(20)
(30)
(96)
(48) (34.5) (69) (124) (40)
(20)
(42)
(42)
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 12
Square Shank Tool Holders: Double
W1
L
H
T1
D
T
H1
L1
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
W
Tool
Shank
Shank
Dia.
Width
Part Number
T
T1
D
L
L1
W
X X HE-3936341-E 1.000" 1.339" 1.574" 2.835" 1.969" 3.681"
(25.4) (34)
(40)
(72)
(50) (93.5)
X X HE-3936341 .984" 1.339" 1.574" 2.835" 1.969" 3.681"
(25)
(34)
(40)
(72)
(50) (93.5)
Height
W1
H
H1
1.870" 1.890" 3.169"
(47.5) (48) (80.5)
1.870" 1.890" 3.169"
(47.5) (48) (80.5)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 13
Plugs & Cut-Off Tool Holder
Plug
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
H
X X
X
X X
D
CH
CH1
S
Part Number
TT-0011944
HE-2813632
Shank
Dia.
Hub
Dia.
Center
Height
D
1.181"
(30)
1.574"
(40)
H
2.677"
(68)
3.267"
(83)
CH
1.102"
(28)
1.279"
(32.5)
Shoulder
CH1
1.181"
(30)
—
S
.630"
(16)
.787"
(20)
Cut-Off
CW
D
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
CW2
X X
CW1
TL
CH
TH1
CH1
TH
NOTE: Used on upper turret only for
QUEST TT65.
21⁄2" maximum cut-off diameter
L
T
Side to
Center
Tool
Length
Tool
Height
Blade
Height
Shank
Dia.
Length
Center
Width
Center
Holder
Center
Height
Gauge
Length
Part Number Style T
TL
TH
TH1
D
L
CW CW1 CW2
CH
CH1
G
TTB-0011944-07 LH 1.378" 4.134" .843" 1.024" 1.181" 2.992" 1.575" 3.150" .787" 1.693" 3.386" .787"
(35) (105) (21.4) (26)
(30)
(76)
(42)
(80)
(20)
(43)
(86)
(20)
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 14
Round Shank Tool Holders: External Coolant
External Coolant
L1
D2
S
F
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
D1 T
Part Number
X HE-3938073
X HE-3938099
X HE-9938099-E
X HE-3938107
X HE-3938107-E
X HE-3938115
X HE-3938115-E
X HE-3938123
X HE-3938123-E
X HE-3938131
X HE-3938131-E
*
X HE-3938149
*
X HE-3938149-E
*
X HE-3938156
*
X HE-3938156-E
TH D
L2
L
Tool
Dia.
Shank
Dia.
T
.314"
(8)
.393"
(10)
.375"
(9.52)
.472"
(12)
.500"
(12.70)
.629"
(16)
.625"
(15.87)
.787"
(20)
.750"
(19.05)
.984"
(25)
1.000"
(25.4)
1.259"
(32)
1.250"
(31.75)
1.574"
(40)
1.500"
(38.1)
D
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
1.574"
(40)
Length
D1
2.165"
(55)
2.165"
(55)
2.165"
(55)
2.165"
(55)
2.165"
(55)
2.165"
(55)
2.165"
(55)
2.165"
(55)
2.165"
(55)
2.165"
(55)
2.165"
(55)
3.268"
(76)
3.268"
(76)
3.268"
(76)
3.268"
(76)
D2
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
3.268"
(83)
L
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
2.952"
(75)
L1
2.401"
(61)
2.401"
(61)
2.401"
(61)
2.401"
(61)
2.401"
(61)
2.401"
(61)
2.401"
(61)
2.401"
(61)
2.401"
(61)
2.401"
(61)
2.401"
(61)
2.401"
(61)
2.401"
(61)
2.992"
(76)
2.992"
(76)
L2
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
F
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
Screw
Thread
S
M8
TH
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
M8
M22x1.5
* Slotted bushings can be found in the last few pages of this brochure.
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 15
Round Shank Tool Holders: Internal Coolant
Internal Coolant
L1
D2
L3
F
D
D1 T
S
L2
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
L
Part Number
X HE-0514016
X HE-0514020
X HE-0514025
*
X HE-0514032
*
X HE-0514040
Tool
Dia.
Shank
Dia.
T
D
.625" 1.574"
(16) (40)
.750" 1.574"
(20) (40)
1.000" 1.574"
(25) (40)
1.250" 1.574"
(32) (40)
1.500" 1.574"
(40) (40)
Length
D1
2.125"
(54)
2.125"
(54)
2.480"
(63)
2.716"
(69)
2.992"
(76)
D2
3.267"
(83)
3.267"
(83)
3.267"
(83)
3.267"
(83)
3.267"
(83)
L
2.637"
(67)
2.637"
(67)
2.952"
(75)
2.952"
(75)
3.543"
(90)
Screw
L1
2.125"
(54)
2.125"
(54)
2.322"
(59)
2.480"
(63)
2.874"
(73)
L2
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
.866"
(22)
L3
1.377"
(35)
1.377"
(35)
1.574"
(40)
1.732"
(44)
2.125"
(54)
F
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
1.280"
(32.5)
3
S
⁄8-16
3
⁄8-16
3
⁄8-16
3
⁄8-16
5
⁄8-11
* Slotted bushings can be found in the last few pages of this brochure.
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 16
Round Shank Tool Holders: 1/2" & 12mm Y-Axis
T
TL
CW1
D
CW2
CW
L
CW3
CH
CH2
T
CH1
CH3
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
TC
X
X
NOTE: One straight nozzle is included with each tool
holder. Refer to page 38 for straight & 90° nozzles.
Used on upper turret only for QUEST TT65
Tool
Tool
Tool
Shank
Center
Center
Dia.
Length
Center
Dia.
Length
Width
Height
TL
5.000"
(127)
5.000"
(127)
TC
2.717"
(69)
2.717"
(69)
D
1.181"
(30)
1.181"
(30)
L
3.059"
(77.7)
3.059"
(77.7)
CW
1.378"
(35)
1.378"
(35)
Part Number
T
TTA-0011944-25A .500"
(12.7)
TTA-0011944-26A .472"
(12)
CW1
1.378"
(35)
1.378"
(35)
CW2
1.740"
(44.2)
1.740"
(44.2)
CW3
2.087"
(53)
2.087"
(53)
CH
1.358"
(34.5)
1.358"
(34.5)
CH1
2.716"
(69)
2.716"
(69)
CH2
1.004"
(25.5)
1.004"
(25.5)
CH3
1.004"
(25.5)
1.004"
(25.5)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 17
Round Shank Tool Holders: Standard & Long
T
CW1
D
CW
CW2
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
CW3
X X
X X
X X
X X
X X
X X
X X
X X
*
X X
*
X X
*
X X
*
X X
†
X
†
X
TC
CH
CH2
T
CH3
CH1
L
NOTE: One straight nozzle is included with each tool
holder. Refer to page 38 for straight & 90° nozzles.
Tool
Dia.
Part Number
Style T
X TTA-0011944-09A Std. .750"
(19.05)
X TTA-0011944-09LA Long .750"
(19.05)
X TTA-0011944-10A Std. .787"
(20mm)
X TTA-0011944-10LA Long .787"
(20mm)
X TTA-0011944-11A Std. 1.000"
(25.4)
X TTA-0011944-11LA Long 1.000"
(25.4)
X TTA-0011944-12A Std. .984"
(25mm)
X TTA-0011944-12LA Long .984"
(25mm)
X TTA-0011944-23A Std. 1.250"
(31.75)
X TTA-0011944-23LA Long 1.250"
(31.75)
X TTA-0011944-24A Std. 1.260"
(32mm)
X TTA-0011944-24LA Long 1.260"
(32mm)
QC-0011944-07L Long 1.250"
(31.75)
QC-0011944-08L Long 1.260"
(32mm)
Tool
Center
Shank
Dia.
Length
Center
Locator
Center
Width
Center
Width
Center
Width
Center
Height
Center
Height
Center
Height
TC
2.756"
(70)
3.465"
(88)
2.756"
(70)
3.465"
(88)
2.756"
(70)
3.465"
(88)
2.756"
(70)
3.465"
(88)
2.756"
(70)
3.465"
(88)
2.756"
(70)
3.465"
(88)
D
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
L
3.583"
(91)
4.291"
(109)
3.583"
(91)
4.291"
(109)
3.583"
(91)
4.291"
(109)
3.583"
(91)
4.291"
(109)
3.583"
(91)
4.291"
(109)
3.583"
(91)
4.291"
(109)
CW
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
CW1
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
CW2
1.740"
(44.2)
1.740"
(44.2)
1.740"
(44.2)
1.740"
(44.2)
1.740"
(44.2)
1.740"
(44.2)
1.740"
(44.2)
1.740"
(44.2)
1.740"
(44.2)
1.740"
(44.2)
1.740"
(44.2)
1.740"
(44.2)
CW3
2.087"
(53)
2.087"
(53)
2.087"
(53)
2.087"
(53)
2.087"
(53)
2.087"
(53)
2.087"
(53)
2.087"
(53)
2.087"
(53)
2.087"
(53)
2.087"
(53)
2.087"
(53)
CH
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
CH1
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
CH2&3
1.004"
(25.5)
1.004"
(25.5)
1.004"
(25.5)
1.004"
(25.5)
1.004"
(25.5)
1.004"
(25.5)
1.004"
(25.5)
1.004"
(25.5)
1.004"
(25.5)
1.004"
(25.5)
1.004"
(25.5)
1.004"
(25.5)
4.331" 1.181" 5.160" 1.378" 1.398"
(110) (30) (131) (35) (35.5)
4.331" 1.181" 5.160" 1.378" 1.398"
(110) (30) (131) (35) (35.5)
1.713" 2.087" 1.358" 2.716" 1.004"
(43.5) (53) (34.5) (69) (25.5)
1.713" 2.087" 1.358" 2.716" 1.004"
(43.5) (53) (34.5) (69) (25.5)
*
Slotted bushings can be found on the last few pages of this brochure.
† Designed for use on QUEST 6/42 machines; may be used on QUEST 8/51 and 10/65 lathes.
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 18
Round Shank Tool Holders: Left/Right-hand & Long Offset
S
For RH
Holders
T
D
CW
CW2
CW3
TC
CW1
CH
CH1
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
L
X X
X X
X X
X X
X X
X X
X X
X X
NOTE: One straight nozzle is included with each tool
holder. Refer to page 35 for straight & 90° nozzles and
the last few pages of this brochure for slotted bushings.
Left-Hand Toolholder Shown
Right-Hand Mirror Image
Tool
Dia.
Part Number
Style
T
X TTA-0011944-13A LH 1.250"
(31.75)
X TTA-0011944-13LA LH 1.250"
(31.75)
TTA-0011944-14A RH 1.250"
(31.75)
TTA-0011944-14LA RH 1.250"
(31.75)
X TTA-0011944-15A LH 1.260"
(32mm)
X TTA-0011944-15LA LH 1.260"
(32mm)
TTA-0011944-16A RH 1.260"
(32mm)
TTA-0011944-16LA RH 1.260"
(32mm)
Tool
Center
Shank
Dia.
Length
Center
Locator
Center
Width
Center
Width
Center
Width
Center
Height
Center
Height
Step
TC
2.756
(70)
3.465
(88)
2.756
(70)
3.465
(88)
2.756
(70)
3.465
(88)
2.756
(70)
3.465
(88)
D
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
L
3.622"
(92)
4.331"
(110)
3.622"
(92)
4.331"
(110)
3.622"
(92)
4.331"
(110)
3.622"
(92)
4.331"
(110)
CW
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
CW1
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
CW2
2.362"
(60)
2.362"
(60)
2.362"
(60)
2.362"
(60)
2.362"
(60)
2.362"
(60)
2.362"
(60)
2.362"
(60)
CW3
2.724"
(69.2)
2.724"
(69.2)
2.724"
(69.2)
2.724"
(69.2)
2.724"
(69.2)
2.724"
(69.2)
2.724"
(69.2)
2.724"
(69.2)
CH
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
CH1
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
S
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 19
3
Round Shank Tool Holders: 2-Hole, /4" Left- & Right-hand
RH
Holders
T
W3
T
D
W2
CW
TC1
TC
CH
CH2
CH1
CH3
L
NOTE: One straight nozzle is included with each tool
holder. Refer to page 35 for straight & 90° nozzles and
the last few pages of this brochure for slotted bushings.
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
Left-Hand Toolholder Shown
X X
X X
X X
X X
Right-Hand Mirror Image
Tool
Dia.
Part Number Style
T
X TT-0011944-17A LH .750"
(19.05)
TT-0011944-18A RH .750"
(19.05)
X TT-0011944-19A LH .787"
(20)
TT-0011944-20A RH .787"
(20)
1st
Tool
Center
2nd
Tool
Center
Shank
Dia.
Length
Center
Locator
TC
2.717"
(69)
2.717"
(69)
2.717"
(69)
2.717"
(69)
TC1
3.780"
(96)
3.780"
(96)
3.780"
(96)
3.780"
(96)
D
1.181"
(30)
1.181"
(30)
1.181"
(30)
1.181"
(30)
L
4.331"
(110)
4.331"
(110)
4.331"
(110)
4.331"
(110)
CW
1.378"
(35)
1.378"
(35)
1.378"
(35)
1.378"
(35)
Center
Width
Center
Width
W1 W2
1.890" 2.165"
(48) (55)
1.890" 2.165"
(48) (55)
1.890" 2.165"
(48) (55)
1.890" 2.165"
(48) (55)
Center
Height
Center
Height
Center
Height
CH CH1 CH2&3
1.358" 2.716" .984"
(34.5) (69) (34.5)
1.358" 2.716" .984"
(34.5) (69) (34.5)
1.358" 2.716" .984"
(34.5) (69) (34.5)
1.358" 2.716" .984"
(34.5) (69) (34.5)
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 20
Round Shank Tool Holders: 11/2" & 40mm
L
L1
H1
H
T
CW2
CW
D
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
CW1 CW2
X
X
X
X
X
X
X
X
NOTE: This holder cannot be used on the
sub-spindle for QUEST 6/42, 8/51 and 10/65
machines. Refer to the last few pages of this
brochure for slotted bushings.
Shank
Dia.
Part Number
Style
D
X QC-0011944-04 Std 1.181"
(30)
X QC-0011944-04L Long 1.181"
(30)
X QC-0011944-03 Std. 1.181"
(30)
X QC-0011944-03L Long 1.181"
(30)
QC-0011944-05 Std. 1.575"
(40)
QC-0011944-05L Long 1.575"
(40)
QC-0011944-06 Std. 1.575"
(40)
QC-0011944-06L Long 1.575"
(40)
Tool
Dia.
Length
T
1.575"
(40)
1.575"
(40)
1.500"
(38)
1.500"
(38)
1.575"
(40)
1.575"
(40)
1.500"
(38)
1.500"
(38)
L
2.756"
(70)
3.543"
(90)
2.756"
(70)
3.543"
(90)
3.151"
(80)
4.331"
(110)
3.151"
(80)
4.331"
(110)
Center
Width
Height
L1
1.397"
(35.5)
1.397"
(35.5)
1.397"
(35.5)
1.397"
(35.5)
1.377"
(35)
1.377"
(35)
1.377"
(35)
1.377"
(35)
H
2.716"
(69)
2.716"
(69)
2.716"
(69)
2.716"
(69)
3.151"
(80)
3.151"
(80)
3.151"
(80)
3.151"
(80)
H1
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.358"
(34.5)
1.575"
(40)
1.575"
(40)
1.575"
(40)
1.575"
(40)
CW
3.109"
(79)
3.109"
(79)
3.109"
(79)
3.109"
(79)
3.623"
(92)
3.623"
(92)
3.623"
(92)
3.623"
(92)
CW1
1.712"
(43.5)
1.712"
(43.5)
1.712"
(43.5)
1.712"
(43.5)
1.969"
(50)
1.969"
(50)
1.969"
(50)
1.969"
(50)
CW2
1.397"
(35.5)
1.397"
(35.5)
1.397"
(35.5)
1.397"
(35.5)
1.654"
(42)
1.654"
(42)
1.654"
(42)
1.654"
(42)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 21
Tool Holders: ER32 Collet & Gripper/Catcher
Internal Coolant
D2
F
B D
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
D1 T
L2
L1
NOTE: Refer to the last few
pages of this brochure for
ER collets and tap collets.
L
Collet
Bore
Part Number
X HE-3934874
Shank
Dia.
Length
Style
T
Collet
D
D1
D2
F
L
L1
L2
ER 3⁄32"- 3⁄4" ER32 1.574" 1.968" 3.268" 1.280" 2.952" 2.480" .866"
(2 - 20)
(40) (50) (83) 32.5 (75) (63) (22)
Gripper/Catcher
CH1
CH2
CO
F
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
W
W1
F1
X
TUC
TC
CH
CH3
TH
⁄8"-18
5
G
y
;
D
P
L
NOTE: Used on lower turret only for
QUEST TT65.
One set of machinable nylon pads
is included. Replacement pad part
numbers are TT-0007934 and
TT-0007934-02 (1 each required).
Shank
Dia.
Max.
Open
Height
Center
Height
Length
Part Number CO D
F
F1
G
CH CH1&2 CH3
L
P
TC TUC
W
W1
TTA-0012188 13° 1.181" .394" .472" 3.937" 2.593" 1.378" 2.087" 3.780" 3.000" 2.953" 5.197" 3.425" 2.717"
(30) (10) (12) (100) (75)
(35)
(53)
(96) (76.2) (75) (132) (87)
(69)
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 22
Tool Holders: ER25 Collet Reversible Standard & Long
T
CW1
Max.
D
CW
TC
CW2
S
CH
CH1
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
L
X X
X X
NOTE: One straight nozzle is included with
each tool holder. Refer to page 38 for straight
& 90° nozzles and the last few pages of this
brochure for ER collets, tap collets and ER25
setting bar.
Collet
Bore
Tool
Center
Shank
Dia.
Length
Center
Locator
Center
Width
Center
Width
Center
Height
Part Number
Style
T
Collet TC
D
L
CW CW1 CW2
CH
X TT-0011944-21A Std. 1⁄16"- 5⁄8" ER25 2.756" 1.181" 3.622" 1.378" 1.988" 2.087" 1.319"
(1 - 16)
(70)
(30)
(92)
(35) (50.5) (53) (33.5)
X TT-0011944-21LA Long 1⁄16"- 5⁄8" ER25 3.465" 1.181" 4.331" 1.378" 1.988" 2.087" 1.319"
(1 - 16)
(88)
(30) (110) (35) (50.5) (53) (33.5)
Center
Height
Step
CH1
2.638"
(67)
2.638"
(67)
S
1.732"
(44)
2.441"
(62)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 23
Tool Holders: ER25 Collet Standard & Long
T
Max.
CW1
D
CW
Max.
CW2
T
TC
CW3
S
CH
CH1
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
L
X X
X
X
NOTE: One straight nozzle is included with
each tool holder. Refer to page 38 for straight
& 90° nozzles and the last few pages of this
brochure for ER collets, tap collets and ER25
setting bar.
Collet
Bore
Tool
Center
Shank
Dia.
Length
Center
Locator
Center
Width
Center
Width
Center
Height
Part Number
Style
T
Collet TC
D
L
CW CW1&2 CW3
CH
TT-0011944-22A Std. 1⁄16"- 5⁄8" ER25 2.756" 1.181" 3.622" 1.378" 1.988" 2.087" 1.319"
(1 - 16)
(70)
(30)
(92)
(35) (50.5) (53) (33.5)
TT-0011944-22LA Long 1⁄16"- 5⁄8" ER25 3.465" 1.181" 4.331" 1.378" 1.988" 2.087" 1.319"
(1 - 16)
(88)
(30) (110) (35) (50.5) (53) (33.5)
Center
Height
Step
CH1
2.638"
(67)
2.638"
(67)
S
.1.732"
(44)
2.441"
(62)
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 24
Tool Holders: ER25/32/40 with Interchangeable Heads
Interchangeble Heads
ER40 Insert
QC-0011944-I40
ER Inserts must be purchased separately.
See dimensions and part numbers to the right.
T = .118 to 1.024"
3 to 26mm
Ø1.969"
50mm
Ø2.482"
63mm
CH1
CW1
CW1
CH
1.260"
32mm
.472"
12mm
1.850"
47mm
Max
ER32 Insert
QC-0011944-I32
T = .079 to .787"
2 to 20mm
L
Ø1.969"
50mm
TC
Ø1.970"
50mm
.472"
12mm
1.772"
45mm
Max
1.260"
32mm
ER25 Insert
QC-0011944-I25
T = .032 to .625"
1 to 16mm
Ø1.969"
50mm
CW
Ø1.655"
42mm
D
CW2
1.260"
32mm
.472"
12mm
1.654"
42mm
Max
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
Standard-Length Toolholder Shown
NOTE: One 3.9"/100mm straight copper
nozzle is included with each tool holder
(part number QC-000700-7100). Refer to
the last few pages of this brochure for ER
collets, tap collets and ER25 setting bar.
Collet
Bore
X
Part Number
Style
QC-0011944-11 Std.
X
QC-0011944-11L Long
T
See
Illus.
See
Illus.
Tool
Center
Shank
Dia.
Length
Center
Locator
Center
Width
Width
Center
Height
Center
Height
Collet TC
D
L
CW CW1 CW2
CH
CH1
ER 3.149" 1.575" 4.526" 1.654" 1.299" 3.308" 1.575" 3.15"
(80)
(40) (115) (42)
(33)
(84)
(40)
(80)
ER 4.331" 1.575" 5.708" 1.654" 1.299" 3.308" 1.575" 3.15"
(110) (40) (145) (42)
(33)
(84)
(40)
(80)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 25
Driven Tool Holders: ER32 End-Working
External Coolant
L
D
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
T
NOTE: Coolant must be fed continuously through
internal coolant holders. Refer to the last few
pages of this brochure for ER collets & tap collets.
Collet
Bore
Shank
Dia.
Max.
Coolant
Part Number Style T Collet D
L RPM Torque Ratio Psi
X X HE-3748662
ER 3⁄32"- 3⁄4" ER32 1.574" 3.465" 6500 36 ft-lb 1:1 1015 psi
(2 - 20)
(40) (88) — 50 Nm — 70 bar
Internal & External Coolant
L
D
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
T
X X
NOTE: Coolant must be fed continuously through
internal coolant holders. Refer to the last few
pages of this brochure for ER collets & tap collets.
Collet
Bore
Shank
Dia.
Max.
Coolant
Part Number Style T Collet D
L RPM Torque Ratio
Psi
HE-3748530
ER 3⁄32"- 3⁄4" ER32 1.574" 3.465" 6500 36 ft-lb 1:1 1015 psi
(2 - 20)
(40) (88) — 50 Nm —
70 bar
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 26
Driven Tool Holders: ER32 Collet Cross-Working
External or Internal & External Coolant
L1
CW
D
NOTE: Coolant must be fed continuously
through internal coolant holders. Refer to the
last few pages of this brochure for ER collets &
tap collets.
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
L
Collet
Bore
Shank
Dia.
Max.
Coolant
Part Number Style T Collet D
L
L1 CW RPM Torque Ratio
Psi
X HE-4078390
ER 3⁄32"- 3⁄4" ER32 1.574" 4.606" 2.953" 1.102" 6000 59 ft-lb 1:1
1015psi
(External Only)
(2 - 20)
(40) (117) (75) (28)
— 80 Nm —
70 bar
X HE-3797222
ER 3⁄32"- 3⁄4" ER32 1.574" 3.465" 2.953" 1.102" 6000 59 ft-lb 1:1
1015psi
(Int. & Ext.)
(2 - 20)
(40) (117) (75) (28)
— 80 Nm —
70 bar
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Driven Tool Holders: Left-/Right-Hand End-Working
VDI Toolholders
Hardinge Lathes
Page 27
Internal or External Coolant
Picture shows orientation
to main spindle.
L
Input rotation is opposite to
output rotation.
L1
M
52/54
T
M
51/53
CW
W1
D
W2
For internal coolant only
H2
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
H
X
X
X
X
X
X
X
X
NOTE: Coolant must be fed continuously through
internal coolant holders. Refer to the last few
pages of this brochure for ER collets and tap
collets.
Left-Hand Toolholder Shown
Right-Hand Mirror Image
Collet
Bore
Part Number
T
QCA-0000144-07AG 1⁄16"- 5⁄8"
(Main Spindle - Ext. Coolant) (1 - 16)
QCA-0000144-08AG 1⁄16"- 5⁄8"
(Main Spindle - Int. Coolant) (1 - 16)
QCA-0000144-09AG 1⁄16"- 5⁄8"
(Sub Spindle - Ext. Coolant)
(1 - 16)
QCA-0000144-10AG 1⁄16"- 5⁄8"
(Sub Spindle - Int. Coolant)
(1 - 16)
QC-0000144-12AG 3⁄32"- 3⁄4"
(Main Spindle - Ext. Coolant) (2 - 20)
QC-0000144-13AG 3⁄32"- 3⁄4"
(Main Spindle - Int. Coolant) (2 - 20)
QC-0000144-14AG 3⁄32"- 3⁄4"
(Sub Spindle - Ext. Coolant) (2 - 20)
QCA-0000144-15AG 3⁄32"- 3⁄4"
(Sub Spindle - Int. Coolant)
(2 - 20)
Shank
Dia.
Collet D
ER25 1.181"
(30)
ER25 1.181"
(30)
ER25 1.181"
(30)
ER25 1.181"
(30)
ER32 1.575"
(40)
ER32 1.575"
(40)
ER32 1.575"
(40)
ER32 1.575"
(40)
Max.
Coolant
L
3.740"
(95)
3.740"
(95)
3.740"
(95)
3.740"
(95)
5.000"
(127)
5.000"
(127)
5.000"
(127)
5.000"
(127)
L1
2.755"
(70)
2.755"
(70)
2.755"
(70)
2.755"
(70)
3.543"
(90)
3.543"
(90)
3.543"
(90)
3.543"
(90)
CW
2.559"
(65)
2.559"
(65)
2.559"
(65)
2.559"
(65)
3.307"
(84)
3.307"
(84)
3.307"
(84)
3.307"
(84)
W1
1.377"
(35)
1.377"
(35)
1.377"
(35)
1.377"
(35)
1.929"
(49)
1.929"
(49)
1.929"
(49)
1.929"
(49)
W2
—
2.047"
(52)
—
2.047"
(52)
1.831"
(46.5)
2.756"
(70)
1.831"
(46.5)
2.756"
(70)
H
2.558"
(65)
2.558"
(65)
2.558"
(65)
2.558"
(65)
3.150"
(80)
3.150"
(80)
3.150"
(80)
3.150"
(80)
H1
1.279"
(32.5)
1.279"
(32.5)
1.279"
(32.5)
1.279"
(32.5)
1.575"
(40)
1.575"
(40)
1.575"
(40)
1.575"
(40)
Torque Ratio Psi
14.75 ft-lb 1:1 1000psi
20 Nm
70 bar
14.75 ft-lb 1:1 350psi
20 Nm
25 bar
14.75 ft-lb 1:1 1000psi
20 Nm
70 bar
14.75 ft-lb 1:1 350psi
20 Nm
25 bar
36.75 ft-lb 1:1 1000psi
50 Nm
70 bar
36.75 ft-lb 1:1 350psi
50 Nm
25 bar
36.75 ft-lb 1:1 1000psi
50 Nm
70 bar
36.75 ft-lb 1:1 350psi
50 Nm
25 bar
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 28
Driven Tool Holders: Left-Hand End-Working
Internal & External Coolant
CW
CW2
CH
CW1
L
TC
D
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
NOTE: Refer to the last few pages of this
brochure for ER collets and tap collets.
X
Collet
Bore
Part Number
ML-0000144-02
Tool
Center
Shank
Dia.
Length
Center
Height
Center
Locator
Center
Width
Max.
Coolant
Style
Collet TC
D
L
CH
CW CW1 CW2 Psi
LH 1⁄16"- 5⁄8" ER25 3.347" 1.181" 4.567" 2.520" 1.270" 2.599" 2.500" 363 psi
(1 - 16)
(85)
(30) (116) (64)
(32) (66) (63.5) 25 bar
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 29
Driven Tool Holders: Left-/Right-Hand End-Working
External Coolant
L
TC
CH
CW2
CW
D
CW1
NOTE: Coolant must be fed continuously through
internal coolant holders. Refer to the last few pages
of this brochure for ER collets and tap collets.
T
Max.
Right-Hand Toolholder Shown
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
Left-Hand Mirror Image
X
X
Collet
Bore
Tool
Center
Shank
Dia.
Length
Center
Height
Center
Locator
Center
Width
Part Number
Style
T
Collet TC
D
L
CH
CW CW1
TT-0000144-03EG RH 1⁄16"- 5⁄8" ER25 2.756" 1.181" 3.937" 2.717" 1.378" 2.953"
(1 - 16)
(70)
(30) (100) (69)
(35) (75)
TT-0000144-07EG LH 1⁄16"- 5⁄8" ER25 2.756" 1.181" 3.937" 2.717" 1.378" 2.953"
(1 - 16)
(70)
(30) (100) (69)
(35) (75)
CW2
1.673"
(42.5)
1.673"
(42.5)
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 30
Driven Tool Holders: Left- or Right-Hand End-Working
Internal Coolant
L
TC
CH
CW2
CW
D
CW1
NOTE: Coolant must be fed continuously through
internal coolant holders. Refer to the last few pages
of this brochure for ER collets and tap collets.
T
Right-Hand Toolholder Shown
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
Left-Hand Mirror Image
X
X
Collet
Bore
Tool
Center
Shank
Dia.
Length
Center
Height
Center
Locator
Center
Width
Max.
Coolant
Part Number
Style
T
Collet TC
D
L
CH
CW CW1 CW2 Psi
1
5
TT-0000144-04EG RH ⁄16"- ⁄8" ER25 2.756" 1.181" 3.937" 2.717" 1.378" 3.209" 2.165" 176 psi
(1 - 16)
(70)
(30) (100) (69)
(35) (81.5) (55) 12 bar
TT-0000144-08EG LH 1⁄16"- 5⁄8" ER25 2.756" 1.181" 3.937" 2.717" 1.378" 3.209" 2.165" 76 psi
(1 - 16)
(70)
(30) (100) (69)
(35) (81.5) (55) 12 bar
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 31
Driven Tool Holders: ER25 Cross-Working
External Coolant
CH2
CH1
CW1
D
T
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
CW2
X
L
NOTE: Refer to the last few pages of this brochure
for ER collets and tap collets.
Collet
Bore
Shank
Dia.
Length
Center
Height
Center
Width
Max.
Coolant
Part Number
Style
T
Collet
D
L
CH
CH1 CW1 CW2
Psi
TT-0000144-01EG ER 1⁄16"- 5⁄8" ER25 1.181" 2.362" 1.500" 3.000" 1.500" 3.000" 176 psi
(1 - 16)
(30)
(60)
(38)
(76)
(38) (76) 12 bar
Internal Coolant
CH2
CH1
CW1
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
CW2
X
T
D
L
NOTE: Coolant must be fed continuously through
internal coolant holders. Refer to the last few pages
of this brochure for ER collets and tap collets.
Collet
Bore
Shank
Dia.
Length
Center
Height
Center
Width
Max.
Coolant
Part Number
Style
T
Collet
D
L
CH
CH1 CW1 CW2
Psi
TT-0000144-02EG ER 1⁄16"- 5⁄8" ER25 1.181" 2.362" 1.500" 3.000" 1.500" 3.000" 176 psi
(1 - 16)
(30)
(60)
(38)
(76)
(38) (76) 12 bar
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 32
Driven Tool Holders: ER25 Cross-Working
External Coolant
CH
CH1
CW
D
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
T
CW1
L
L1
NOTE: Refer to the last few pages of this
brochure for ER collets and tap collets.
Collet
Bore
Shank
Dia. Length
Center
Width
Center
Height
Max.
Coolant
Part Number T Collet D
L
L1 CW CW1 CH CH1 Torque Ratio Psi
ML-0000144-01 1⁄16"- 5⁄8" ER25 1.181" 2.540" 2.284" 2.441" 1.220" 2.520" 1.260" 23.6 ft-lb 1:1 1000psi
(External Coolant)
(1 - 16)
(30) (64.5) (58) (69) (31) (64) (32) 32 Nm
70 bar
X
Internal or External Coolant
CH
QUEST TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
CH1
CW
D
T
CW1
L1
NOTE: Coolant must be fed continuously through
internal coolant holders. Refer to the last few pages
of this brochure for ER collets and tap collets.
®
L Max.
X
X
Collet
Bore
Shank
Dia. Length
Part Number
T Collet D
1
QCA-0000144-01AG ⁄16"- 5⁄8" ER25 1.181"
(External Coolant)
(1 - 16)
(30)
QCA-0000144-02AG 1⁄16"- 5⁄8" ER25 1.181"
(Internal Coolant)
(1 - 16)
(30)
L
3.818"
(97)
3.818"
(97)
Center
Width
L1
2.165"
(55)
2.165"
(55)
CW
2.716"
(69)
2.716"
(69)
Center
Height
CW1
1.358"
(34.5)
1.358"
(34.5)
CH
2.754"
(70)
2.754"
(70)
Max.
Coolant
CH1
1.377"
(35)
1.377"
(35)
Torque Ratio Psi
14.75 ft-lb 1:1 1000psi
20 Nm
70 bar
14.75 ft-lb 1:1 350psi
20 Nm
25 bar
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 33
Driven Tool Holders: Double-Spindle End-Working
L
External Coolant
TC
CH
CW1
D
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
CW2
X
CW
NOTE: Refer to the last few pages of this
brochure for ER collets and tap collets.
T
Collet
Bore
Tool
Center
Shank
Dia.
Length
Center
Height
Center
Locator
Center
Width
Center
Width
Max.
Coolant
Part Number
Style
T
Collet TC
D
L
CH
CW CW1 CW2 Psi
TT-0000144-05EG ER 1⁄16"- 5⁄8" ER25 2.756" 1.181" 4.213" 2.914" 1.378" 2.756" 5.512" 176 psi
(1 - 16)
(70)
(30) (107) (74)
(35) (70) (140) 12 bar
External Coolant
NOTE: Refer to the last few pages of this
brochure for ER collets and tap collets.
L
TC
Input rotation is equal to
output rotation.
M
51/53
M
52/54
CW1 Max.
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
W
W2
CW Max.
X
D
W1
W3
Input rotation is opposite to
output rotation.
M
52/54
M
51/53
T
CH1
CH
Collet
Bore
Shank Tool
Center
Dia. Center Length Height
Center
Width
Max.
Coolant
Width
Part Number
T Collet D
TC
L
CH CH1 CW CW1 W W1 W2 W3 Torque Ratio Psi
QC-0000144-03AG 1⁄16"- 5⁄8" ER25 1.181" 2.755" 3.740" 2.558" 1.279" 6.062" 3.031" 1.811" 1.751" 1.397" 1.279" 14.75 ft-lb 1:1 1000psi
(External Coolant)
(1 - 16)
(30) (70) (95) (65) (32.5) (154) (77) (46) (44.5) (35.5) (32.5) 20 Nm
70 bar
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 34
Driven Tool Holder: ER11 & ER20 Angular Adjustable
External Coolant
180°
L
L1
L2
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
D
X
CW
B
D2
CH
T
CH1
CH2
TL
Side to
Center
Part Number
TT-0000144-06AG
Collet
Bore
NOTE: Refer to the last few pages of this
brochure for ER collets and tap collets.
Shank
Dia.
Length
Tool
Center
Length
Center
Height
B
T
Collet
D
L
L1
L2
CW
CH CH1 CH2
TL
1.016" 1⁄16"- 1⁄4" ER11 1.181" 3.150" 1.685" 1.181" 1.378" 1.280" 2.560" 1.496" 2.165"
(25.8) (0.5 - 7)
(30)
(80) (42.8) (30) (35) (32.5) (65) (38)
(55)
NOTE: Refer to the last few pages of this
brochure for ER collets and tap collets.
External Coolant
Input rotation is equal
output rotation
L
180°
T
M
51/53
M
52/54
CW1
D
TL
CW
CH
TC
CH1
CH2
®
QUEST TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
Center
Width
Collet
Bore
X
Part Number
QC-0000144-04AG
X
QC-0000144-11AG
Shank
Dia.
Length
Center
Height
Center
Width
T
Collet
D
L
CH
CH1 CH2 CW
⁄16"- 1⁄2" ER20 1.181" 4.528" 1.339" 2.678" 1.969" 1.398"
(1 - 13)
(30) (115) (34)
(68)
(50) (35.5)
1
⁄16"- 1⁄4" ER11 1.181" 4.528" 1.339" 2.678" 1.969" 1.398"
(0.5 - 7)
(30) (115) (34)
(68)
(50) (35.5)
1
Tool
Center
Tool
Length
CW1 TC
TL
1.280" 3.189" 2.579"
(32.5) (81) (65.5)
1.280" 3.189" 1.890"
(32.5) (81)
(48)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 35
Driven Tool Holder: ER16 Angular Adjustable
External Coolant
Input rotation is equal
output rotation
M
51/53
M
52/54
180°
CW1
T
CW
TL
CH
TC
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
CH1
X
NOTE: Refer to the last few pages of this
brochure for ER collets and tap collets.
Collet
Bore
Part Number
ML-0000144-03
Shank
Dia.
Center
Height
Center
Width
Tool
Center
T
Collet
D
CH
CH1
CW
CW1
TC
⁄16"- 13⁄32" ER16 1.181" 1.496" 2.776" 2.106" 1.280" 2.520"
(1.0 - 10)
(30)
(38) (70.5) (53.5) (32.5)
(64)
1
Tool
Length
TL
2.126"
(54)
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 36
Driven Tool Holder: ER20 Angular Adjustable
TL Max.
L
90°
CW1
T
TC
55°
D
CW2
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
CH1
X
CH
NOTE: This holder occupies two tool
stations on a 10-station turret; three tool
stations on a 12-station turret. One turret
plug (part no. TT-0000144-06P) is included
for adjacent station. Refer to the last few
pages of this brochure for ER collets & tap
collets.
Collet
Bore
Part Number
TT-0000144-06EG
T
⁄16"- 1⁄2"
(1 - 13)
1
Shank
Dia.
Length
Center
Height
Center
Width
Tool
Center
Tool
Length
Collet
D
L
CH
CH1 CW1 CW2
TC
TL
ER20 1.181" 2.667" 2.441" 4.213" 4.685" 1.417" 2.953" 1.732"
(30)
(68)
(62) (107) (119 (36)
(75) (44)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 37
Driven Tool Holder: Polygon Turning
External Coolant
Picture shows orientation
to main spindle.
Input rotation is opposite to
output rotation.
T
M
51/53
M
52/54
D
CW
CW1
CW2
TC
NOTE: For use on main or
sub-spindle on QUEST lathes.
L
CH1
CH
Ø3.543" (90.0)
.635" (16.1)
Ø3.543" (90.0)
.635" (16.1)
Ø1.063" (27.0)
Ø1.063" (27.0)
Ø1.654" (42.0)
Ø1.654" (42.0)
2-Tooth Polygon Cutter
(Part No. QC-0011944-MAS2)
3-Tooth Polygon Cutter
(Part No. QC-0011944-MAS3)
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
ELITE™ 8/51 - VDI 30
Inserts apply to all Polygon holders.
X
X
Tool
Center
Part Number
TC
QC-0000144-05AG 2.760"
(See Note A)
(70.0)
ML-0000144-04
2.165"
(See Note B)
(55.0)
Arbor
Shank
Dia.
Length
Center
Height
T
1.063"
(27.0)
1.063"
(27.0)
D
1.181"
(30.0)
1.181"
(30.0)
L
3.740"
(95.0)
3.189"
(81.0)
CH
2.560"
(65.0)
2.520"
(64.0)
Center
Width
CH1
1.280"
(32.5)
1.260"
(32.0)
CW
2.950"
(75.0)
3.248"
(82.5)
CW1
3.310"
(84.0)
3.602"
(91.5)
CW2
4.870"
(123.7)
5.177"
(131.5)
Note A: Part number QC-0000144-05AG is for the reversible Polygon Holder only. Use kit part number QC-0000144-PTK to order the
holder, one 2-tooth polygon cutter, one 3-tooth polygon cutter, and a package of ten inserts (insert part number QC-0011916-PT).
Note B: Part number ML-0000144-04 is for the Polygon Holder only. Use kit part number ML-0000144-PTK to order the holder, one
2-tooth polygon cutter, one 3-tooth polygon cutter, and a package of ten inserts (insert part number QC-0011916-PT).
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 38
ER25 Collet Setting Bar / Straight & 90° Tool Holder Nozzles
ER25 Setting Bar
.500"
12.7mm
.315"
8.0mm
.630"
16.0mm
Dia.
3.340"
84.8mm
1.024"
26.0mm
NOTE: This setting bar (part number TT-0002321-04) is
used to center boring bars in ER tool holders.
L
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
L1
X X
Length
Part Number
TT-0010109-03
L
L1
6.440" 5.440"
(163.57) (138.17)
L
L1
QUEST® TT65 – VDI 30
QUEST 6/42, 8/51 & 10/65 – VDI 30
QUEST 8/51 & 10/65 – VDI 40
VL3/VL5 – VDI 40
L2
X X
Length
Part Number
TT-0010109-04
L
L1
L2
6.560" 5.560"
.910"
(166.62) (141.22) (23.11)
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 39
HDC Slotted Bushings for Round Shank Tool Holders
HDC-Style Solid Bushings have one or two longitudinal slots,
depending on the size of the bore. The slot allows the set screw
from the tool holder to locate directly on the body of the tool. The
HDC10 has a 11⁄4" or a 32mm OD. The HDC 12 has a 11⁄2" or a
40mm OD. Both styles are available with fractional or metric size
bores and with female Morse tapers.
HDC10 Slotted - Fractional
INCH
Part Number
1829-00-19-003750
1829-00-19-005000
1829-00-19-006250
1829-00-19-007500
1829-00-19-008750
1829-00-19-010000
1829-00-19-011250
OD Bore Decimal Length
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
3
⁄8"
1
⁄2"
5
⁄8"
3
⁄4"
7
⁄8"
1"
11⁄8"
.3750"
.5000"
.6250"
.7500"
.8750"
1.000"
1.125"
3.38"
3.38"
3.38"
3.38"
3.38"
3.38"
3.38"
HDC12 Slotted - Fractional
Part Number
1895-00-19-003750
1895-00-19-005000
1895-00-19-006250
1895-00-19-007500
1895-00-19-008750
1895-00-19-010000
1895-00-19-011250
1895-00-19-012500
HDC10 Taper Hole - ID
Part Number
OD
Size
Taper
Length
Part Number
11⁄4"
#3
Morse
3.38"
9189526001652L
1895-08-80-000004
HDC10M Slotted - Metric
METRIC OD & ID
1831-00-17-080000
1831-00-17-100000
1831-00-17-120000
1831-00-17-160000
1831-00-17-200000
1831-00-17-250000
OD Bore Decimal Length
32 mm
32 mm
32 mm
32 mm
32 mm
32 mm
.3149"
.3937"
.4724"
.6299"
.7874"
.9842"
3.38"
3.38"
3.38"
3.38"
3.38"
3.38"
HDC10M Taper Hole - Metric
Part Number
OD
1831-08-80-000002 32 mm
1831-08-80-000003 32 mm
METRIC OD – INCH ID
8
10
12
16
20
25
Size
Taper
Length
#2
#3
Morse
Morse
3.38"
3.38"
HDC10M Slotted - Fractional
Part Number
1831-00-19-003750
1831-00-19-005000
1831-00-19-006250
1831-00-19-007500
1831-00-19-008750
1831-00-19-010000
OD Bore Decimal Length
32 mm
32 mm
32 mm
32 mm
32 mm
32 mm
3
⁄8"
1
⁄2"
5
⁄8"
3
⁄4"
7
⁄8"
1"
.3870"
.5000"
.6250"
.7500"
.8750"
1.0000"
3
⁄8"
⁄2"
5
⁄8"
3
⁄4"
7
⁄8"
1"
11⁄8"
11⁄4"
1
.3750"
.5000"
.6250"
.7500"
.8750"
1.0000"
1.1250"
1.2500"
3.56"
3.56"
3.56"
3.56"
3.56"
3.56"
3.56"
3.56"
HDC12 Taper Hole - ID
1829-08-80-000003
Part Number
OD Bore Decimal Length
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
3.38"
3.38"
3.38"
3.38"
3.38"
3.38"
OD Size
Taper
Length
11⁄2"
11⁄2"
Morse
Morse
3.56"
3.56"
#3
#4
HDC12M Slotted - Metric
Part Number
1897-00-17-100000
1897-00-17-120000
1897-00-17-160000
1897-00-17-200000
1897-00-17-250000
1897-00-17-300000
1897-00-17-320000
OD Bore Decimal Length
40 mm
40 mm
40 mm
40 mm
40 mm
40 mm
40 mm
10
12
16
20
25
30
32
.3937"
.4724"
.6299"
.7874"
.9842"
1.1811"
1.2598"
3.56"
3.56"
3.56"
3.56"
3.56"
3.56"
3.56"
HDC12M Taper Hole - Metric
Part Number
OD
1897-08-80-000002 40 mm
1897-08-80-000003 40 mm
1897-08-80-000004 40 mm
Size
Taper
Length
#2
#3
#4
Morse
Morse
Morse
3.56"
3.56"
3.56"
HDC12M Slotted - Fractional
Part Number
1897-00-19-005000
1897-00-19-006250
1897-00-19-007500
1897-00-19-008750
1897-00-19-010000
1897-00-19-011250
1897-00-19-012500
OD Bore Decimal Length
40 mm 1⁄2"
40 mm 5⁄8"
40 mm 3⁄4"
40 mm 7⁄8"
40 mm 1"
40 mm 11⁄8"
40 mm 11⁄4"
.5000"
.6250"
.7500"
.8750"
1.0000"
1.1250"
1.2500"
3.56"
3.56"
3.56"
3.56"
3.56"
3.56"
3.56"
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 40
HDC Slotted Bushings for Round Shank Tool Holders (Cont’d.)
INCH OD
HDC10TT Slotted - Fractional
Part Number
OD
2053-00-19-003750
2053-00-19-005000
2053-00-19-006250
2053-00-19-007500
2053-00-19-008750
2053-00-19-010000
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
Bore Decimal Length
3
⁄8"
⁄2"
5
⁄8"
3
⁄4"
7
⁄8"
1"
.3750"
.5000"
.6250"
.7500"
.8750"
1.0000"
1
2.95"
2.95"
2.95"
2.95"
2.95"
2.95"
HDC10TTL Slotted - Fractional
for Offset Holders
Part Number
OD Bore Decimal Length
2067-00-19-003750
2067-00-19-005000
2067-00-19-006250
2067-00-19-007500
2067-00-19-008750
2067-00-19-010000
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
3
⁄8"
⁄2"
5
⁄8"
3
⁄4"
7
⁄8"
1"
.3750"
.5000"
.6250"
.7500"
.8750"
1.0000"
1
2.55"
2.55"
2.55"
2.55"
2.55"
2.55"
HDC10MTTL Slotted - Metric
METRIC OD
INCH OD
HDC10MTT Slotted - Metric
Part Number
Part Number
OD
2251-00-19-003750
2251-00-19-005000
2251-00-19-006250
2251-00-19-007500
2251-00-19-008750
2251-00-19-010000
2251-00-19-011250
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
OD
2055-00-17-080000
2055-00-17-100000
2055-00-17-120000
2055-00-17-160000
2055-00-17-200000
2055-00-17-250000
32 mm
32 mm
32 mm
32 mm
32 mm
32 mm
Part Number
8 mm
10 mm
12 mm
16 mm
20 mm
25 mm
2069-00-17-080000
2069-00-17-100000
2069-00-17-120000
2069-00-17-160000
2069-00-17-200000
2069-00-17-250000
.3149"
.3937"
.4724"
.6299"
.7874"
.9842"
2.95"
2.95"
2.95"
2.95"
2.95"
2.95"
HDC10VL Slotted - Fractional
Bore Decimal Length
3
⁄8"
1
⁄2"
5
⁄8"
3
⁄4"
7
⁄8"
1"
11⁄8"
.3750"
.5000"
.6250"
.7500"
.8750"
1.0000"
1.1250"
2.63"
2.63"
2.63"
2.63"
2.63"
2.63"
2.63"
METRIC OD
METRIC OD – INCH ID
HDC10M -VL Slotted - Metric
Part Number
HDC10M -VL Slotted - Fractional
OD
2253-00-17-080000
2253-00-17-100000
2253-00-17-120000
2253-00-17-160000
2253-00-17-200000
2253-00-17-250000
32 mm
32 mm
32 mm
32 mm
32 mm
32 mm
Part Number
2253-00-19-003750
2253-00-19-005000
2253-00-19-006250
2253-00-19-007500
2253-00-19-010000
Bore Decimal Length
8 mm
10 mm
12 mm
16 mm
20 mm
25 mm
.3149"
.3937"
.4724"
.6299"
.7874"
.9842"
2.63"
2.63"
2.63"
2.63"
2.63"
2.63"
OD Bore Decimal Length
32 mm
32 mm
32 mm
32 mm
32 mm
for Offset Holders
OD Bore Decimal Length
Bore Decimal Length
3
⁄8"
1
⁄2"
5
⁄8"
3
⁄4"
1"
.3750"
.5000"
.6250"
.7500"
1.0000"
2.63"
2.63"
2.63"
2.63"
2.63"
32 mm
32 mm
32 mm
32 mm
32 mm
32 mm
8 mm
10 mm
12 mm
16 mm
20 mm
25 mm
.3149"
.3937"
.4724"
.6299"
.7874"
.9842"
2.55"
2.55"
2.55"
2.55"
2.55"
2.55"
HDC12VL Slotted - Fractional
Part Number
2255-00-19-003750
2255-00-19-005000
2255-00-19-006250
2255-00-19-007500
2255-00-19-008750
2255-00-19-010000
2255-00-19-011250
2255-00-19-012500
OD Bore Decimal Length
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
3
⁄8"
⁄2"
5
⁄8"
3
⁄4"
7
⁄8"
1"
11⁄8"
11⁄4"
1
.3750"
.5000"
.6250"
.7500"
.8750"
1.0000"
1.1250"
1.2500"
3.15"
3.15"
3.15"
3.15"
3.15"
3.15"
3.15"
3.15"
HDC12M-VL Slotted - Metric
Part Number
2257-00-17-100000
2257-00-17-120000
2257-00-17-160000
2257-00-17-200000
2257-00-17-250000
2257-00-17-300000
2257-00-17-320000
OD Bore Decimal Length
40 mm
40 mm
40 mm
40 mm
40 mm
40 mm
40 mm
10
12
16
20
25
30
32
.3937"
.4724"
.6299"
.7874"
.9842"
1.1811"
1.2598"
3.15"
3.15"
3.15"
3.15"
3.15"
3.15"
3.15"
HDC12M-VL Slotted - Fractional
Part Number
2257-00-19-005000
2257-00-19-006250
2257-00-19-007500
2257-00-19-010000
2257-00-19-011250
2257-00-19-012500
OD Bore Decimal Length
40 mm 1⁄2"
40 mm 5⁄8"
40 mm 3⁄4"
40 mm 1"
40 mm 11⁄8"
40 mm 11⁄4"
.5000"
.6250"
.7500"
1.0000"
1.1250"
1.2500"
3.15"
3.15"
3.15"
3.15"
3.15"
3.15"
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 41
HDZ Slotted Bushings for Round Shank Tool Holders
HDZ-Style Solid Bushings feature one or two longitudinal slots, depending on the size of the bore. The slot
allows the set screws from the tool holder to locate
directly on the body of the tool. The bushing has a
flange with two set screws 90° apart. The tool can be
put in the bushing and set to a specific dimension from
the locating shoulder and locked in place. The HDZ10
bushing has a 11⁄4" or a 32mm OD. The HDZ12 bushing
has a 11⁄2" or a 40mm OD. Both bushings are available
in metric or inch ODs and/or IDs.
METRIC OD
INCH OD
METRIC OD
INCH OD
HDZ10 Slotted - Fractional
Part Number
2059-00-19-003750
2059-00-19-005000
2059-00-19-006250
2059-00-19-007500
2059-00-19-008750
2059-00-19-010000
HDZ12 Slotted - Fractional
OD Bore Decimal Length
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
3
⁄8"
1
⁄2"
5
⁄8"
3
⁄4"
7
⁄8"
1"
.3750"
.5000"
.6250"
.7500"
.8750"
1.0000"
3.56"
3.56"
3.56"
3.56"
3.56"
3.56"
OD
2061-00-17-100000
2061-00-17-120000
2061-00-17-160000
2061-00-17-200000
2061-00-17-250000
32 mm
32 mm
32 mm
32 mm
32 mm
Bore Decimal Length
10 mm
12 mm
16 mm
20 mm
25 mm
.3937"
.4724"
.6299"
.7874"
.9842"
OD Bore Decimal Length
2063-00-19-003750
2063-00-19-005000
2063-00-19-006250
2063-00-19-007500
2063-00-19-008750
2063-00-19-010000
2063-00-19-012500
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
3
⁄8"
⁄2"
5
⁄8"
3
⁄4"
7
⁄8"
1"
11⁄4"
1
.3750"
.5000"
.6250"
.7500"
.8750"
1.0000"
1.2500"
3.87"
3.87"
3.87"
3.87"
3.87"
3.87"
3.87"
HDZ12M Slotted - Metric
HDZ10M Slotted - Metric
Part Number
Part Number
3.56"
3.56"
3.56"
3.56"
3.56"
Part Number
OD
2065-00-17-100000
2065-00-17-120000
2065-00-17-160000
2065-00-17-200000
2065-00-17-250000
2065-00-17-320000
40 mm
40 mm
40 mm
40 mm
40 mm
40 mm
Bore Decimal Length
10 mm
12 mm
16 mm
20 mm
25 mm
32 mm
.3937"
.4724"
.6299"
.7874"
.9842"
1.2598"
3.87"
3.87"
3.87"
3.87"
3.87"
3.87"
HDZ10-VL Slotted - Fractional
HDZ12-VL Slotted - Fractional
Part Number
Part Number
2259-00-19-003750
2059-00-19-005000
2059-00-19-006250
2059-00-19-007500
2059-00-19-008750
2059-00-19-010000
OD Bore Decimal Length
1
1 ⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
11⁄4"
3
⁄8"
⁄2"
5
⁄8"
3
⁄4"
7
⁄8"
1"
.3750"
.5000"
.6250"
.7500"
.8750"
1.0000"
1
2.94"
2.94"
2.94"
2.94"
2.94"
2.94"
HDZ10M-VL Slotted - Metric
Part Number
OD
2261-00-17-100000
2261-00-17-120000
2261-00-17-160000
2261-00-17-200000
2261-00-17-250000
32 mm
32 mm
32 mm
32 mm
32 mm
Bore Decimal Length
10 mm
12 mm
16 mm
20 mm
25 mm
.3937"
.4724"
.6299"
.7874"
.9842"
2.94"
2.94"
2.94"
2.94"
2.94"
OD Bore Decimal Length
2263-00-19-003750
2263-00-19-005000
2263-00-19-006250
2263-00-19-007500
2263-00-19-008750
2263-00-19-010000
2263-00-19-012500
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
11⁄2"
3
⁄8"
⁄2"
5
⁄8"
3
⁄4"
7
⁄8"
1"
11⁄4"
1
.3750"
.5000"
.6250"
.7500"
.8750"
1.0000"
1.2500"
3.46"
3.46"
3.46"
3.46"
3.46"
3.46"
3.46"
HDZ12M-VL Slotted - Metric
Part Number
OD
2265-00-17-100000
2265-00-17-120000
2265-00-17-160000
2265-00-17-200000
2265-00-17-250000
2265-00-17-320000
40 mm
40 mm
40 mm
40 mm
40 mm
40 mm
Bore Decimal Length
10 mm
12 mm
16 mm
20 mm
25 mm
32 mm
.3937"
.4724"
.6299"
.7874"
.9842"
1.2598"
3.46"
3.46"
3.46"
3.46"
3.46"
3.46"
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 42
ER11, ER16 & ER20 Collets
ER Series collets range from the small ER8 collet to the large ER50 collet. One collet has enough flex
to hold a large range of tool shanks, eliminating the need for separate collets for each tool. Both the
metric and the inch sizes for all collets are listed. Refer to Brochure 2351 for mounting collets and
concentricity specifications. ER-series collets are interchangeable with DR- and ESX-type collets.
Standard
Collets
Tap
Collet Dimensions
ER
Style
11
16
20
25
32
A - Dia.
mm Inch
B - Length
mm Inch
11.5 .453" 18.0
17.0 .669" 27.0
21.0 .827" 31.0
26.0 1.024" 35.0
33.0 1.299" 40.0
.709"
1.063"
1.220"
1.378"
1.575"
ER16 and ER20 Collets
ER16 Collet
INCH
METRIC
Part Number
Size Range
mm
Inch
1911-00-17-010000 1.0 - 0.5 .039" - .019"
1911-00-17-015000 1.5 - 1.0 .059" - .039"
1911-00-17-020000 2.0 - 1.5 .079" - .059"
1911-00-17-025000 2.5 - 2.0 .098" - .079"
1911-00-17-030000 3.0 - 2.5 .118" - .098"
1911-00-17-035000 3.5 - 3.0 .138" - .118"
1911-00-17-040000 4.0 - 3.5 .157" - .138"
1911-00-17-045000 4.5 - 4.0 .177" - .157"
1911-00-17-050000 5.0 - 4.5 .197" - .177"
1911-00-17-055000 5.5 - 5.0 .217" - .197"
1911-00-17-060000 6.0 - 5.5 .236" - .217"
1911-00-17-065000 6.5 - 6.0 .255" - .236"
1911-00-17-070000 7.0 - 6.5 .276" - .255"
0947-11-17-000013
Set of 13
0947-11-17-00S013 Special Accuracy Set
Fractional Collet
Inch
mm
1
1911-00-19-000625
⁄16"
1.58
3
1911-00-19-000937
⁄32"
2.38
1
1911-00-19-001250
⁄8"
3.17
5
1911-00-19-001562
⁄32"
3.96
3
1911-00-19-001875
⁄16"
4.76
7
1911-00-19-002187
⁄32"
5.55
1
1911-00-19-002500
⁄4"
6.35
0947-11-19-000007
Set of 7
0947-11-19-00S007 Special Accuracy Set
INCH
ER11 Collet
METRIC
ER11 Collets
Size Range
mm
Inch
ER20 Collet
Part Number
1913-00-17-010000
1913-00-17-020000
1913-00-17-030000
1913-00-17-040000
1913-00-17-050000
1913-00-17-060000
1913-00-17-070000
1913-00-17-080000
1913-00-17-090000
1913-00-17-100000
—
—
—
0947-16-17-000010
0947-16-17-00S010
Fractional Collet
1.0 - 0.5
—
2.0 - 1.0 .079"-.039"
3.0 - 2.0 .118"-.079"
4.0 - 3.0 .157"-.118"
5.0 - 4.0 .197"-.157"
6.0 - 5.0 .236"-.197"
7.0 - 6.0 .276"-.136"
8.0 - 7.0 .315"-.276"
9.0 - 8.0 .354"-.315"
10.0 - 9.0 .394"-.354"
11.0 - 10.0 .433"-.394"
12.0 - 11.0 .472"-.433"
13.0 - 12.0 .512"-.472"
Sets: ER16 (10) – ER20 (12)
Special Accuracy Sets
Inch
mm
—
1915-00-17-020000
1915-00-17-030000
1915-00-17-040000
1915-00-17-050000
1915-00-17-060000
1915-00-17-070000
1915-00-17-080000
1915-00-17-090000
1915-00-17-100000
1915-00-17-110000
1915-00-17-120000
1915-00-17-130000
0947-20-17-000012
0947-20-17-00S012
Fractional Collet
1
⁄16"
1.58
1913-00-19-000625
3
1913-00-19-000937
⁄32"
2.38
1
1913-00-19-001250
⁄8"
3.17
5
1913-00-19-001562
⁄32"
3.96
3
1913-00-19-001875
⁄16"
4.76
7
1913-00-19-002187
⁄32"
5.55
1
1913-00-19-002500
⁄4"
6.35
9
1913-00-19-002812
⁄32"
7.14
5
1913-00-19-003125
⁄16"
7.93
11
1913-00-19-003437
⁄32"
8.72
3
1913-00-19-003750
⁄8"
9.52
13
1913-00-19-004062
⁄32"
10.31
7
—
⁄16"
11.11
15
—
⁄32"
11.90
1
—
⁄2"
12.70
0947-16-19-000012 Sets: ER16 (12) – ER20 (15)
0947-16-19-00S012 Special Accuracy Sets
1915-00-19-000625
1915-00-19-000937
1915-00-19-001250
1915-00-19-001562
1915-00-19-001875
1915-00-19-002187
1915-00-19-002500
1915-00-19-002812
1915-00-19-003125
1915-00-19-003437
1915-00-19-003750
1915-00-19-004062
1915-00-19-004375
1915-00-19-004687
1915-00-19-005000
0947-20-19-000015
0947-20-19-00S015
Part Number
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
ER25, ER32 & ERQC Quick-Change Floating Solid Tap Collets
ER25 and ER32 Collets - Metric
ER25 Collet
Part Number
2095-00-17-020000
2095-00-17-030000
2095-00-17-040000
2095-00-17-050000
2095-00-17-060000
2095-00-17-070000
2095-00-17-080000
2095-00-17-090000
2095-00-17-100000
2095-00-17-110000
2095-00-17-120000
2095-00-17-130000
2095-00-17-140000
2095-00-17-150000
2095-00-17-160000
–
–
–
–
0947-25-17-000015
0947-25-17-00S015
Size Range
mm
Inch
2.0 - 1.0 .079" - .039"
3.0 - 2.0 .118" - .079"
4.0 - 3.0 .157" - .118"
5.0 - 4.0 .197" - .157"
6.0 - 5.0 .236" - .197"
7.0 - 6.0 .276" - .236"
8.0 - 7.0 .315" - .276"
9.0 - 8.0 .354" - .315"
10.0 - 9.0 .394" - .354"
11.0 - 10.0 .433" - .394"
12.0 - 11.0 .472" - .433"
13.0 - 12.0 .511" - .472"
14.0 - 13.0 .551" - .511"
15.0 - 14.0 .590" - .551"
16.0 - 15.0 .629" - .590"
17.0 - 16.0 .669" - .629"
18.0 - 17.0 .708" - .669"
19.0 - 18.0 .748" - .708"
20.0 - 19.0 .787" - .748"
Sets: ER25 (15) – ER32 (18)
Special Accuracy Sets
VDI Toolholders
Hardinge Lathes
Page 43
ER25 and ER32 Collets - Inch
ER32 Collet
ER25 Collet
Part Number
Part Number
—
1917-00-17-030000
1917-00-17-040000
1917-00-17-050000
1917-00-17-060000
1917-00-17-070000
1917-00-17-080000
1917-00-17-090000
1917-00-17-100000
1917-00-17-110000
1917-00-17-120000
1917-00-17-130000
1917-00-17-140000
1917-00-17-150000
1917-00-17-160000
1917-00-17-170000
1917-00-17-180000
1917-00-17-190000
1917-00-17-200000
0947-32-17-000018
0947-32-17-00S018
ER32 Collet
Size Range
Inch
mm
Part Number
1
2095-00-19-000625
⁄16"
1.58
3
2095-00-19-000937
⁄32"
2.38
1
2095-00-19-001250
⁄8"
3.17
5
2095-00-19-001562
⁄32"
3.96
3
2095-00-19-001875
⁄16"
4.76
7
2095-00-19-002187
⁄32"
5.55
1
2095-00-19-002500
⁄4"
6.35
9
2095-00-19-002812
⁄32"
7.15
5
2095-00-19-003125
⁄16"
7.93
11
2095-00-19-003437
⁄32"
8.73
3
2095-00-19-003750
⁄8"
9.52
13
2095-00-19-004062
⁄32"
10.31
7
2095-00-19-004375
⁄16"
11.11
15
2095-00-19-004687
⁄32"
11.90
1
2095-00-19-005000
⁄2"
12.70
17
2095-00-19-005312
⁄32"
13.49
9
2095-00-19-005625
⁄16"
14.28
19
2095-00-19-005937
⁄32"
15.08
5
2095-00-19-006250
⁄8"
15.87
21
32"
—
16.66
11
—
⁄16"
17.46
23
—
⁄32"
18.25
3
—
⁄4"
19.05
0947-25-19-000019 Sets: ER25 (19) – ER32 (22)
0947-25-19-00S019 Special Accuracy Sets
—
1917-00-19-000937
1917-00-19-001250
1917-00-19-001562
1917-00-19-001875
1917-00-19-002187
1917-00-19-002500
1917-00-19-002812
1917-00-19-003125
1917-00-19-003437
1917-00-19-003750
1917-00-19-004062
1917-00-19-004375
1917-00-19-004687
1917-00-19-005000
1917-00-19-005312
1917-00-19-005625
1917-00-19-005937
1917-00-19-006250
1917-00-19-006562
1917-00-19-006875
1917-00-19-007187
1917-00-19-007500
0947-32-19-000022
0947-32-19-00S022
ERQC16 & ERQC20 Tap Collets
ERQC Quick-Change Tap Collets
can be used in any standard ER/DR/ESX style
collet holder used on lathes and milling machines.
The ERQC collets allow taps to be quickly changed
without removing the collet, maintaining gauge
lengths from one tap to the next.
The collet has a ball bearing tension compensating
float and a solid square drive that eliminates tap
slippage. Tap breakage is reduced when using
synchronous (rigid) feed or machines requiring
axial tension compensation.
ERQC16 Tap Collet
Size Range
Part Number
Tap Size Shank
2143-00-18-001410
#0 - 6
.141"
2143-00-18-001680
#8
.168"
2143-00-18-001940
#10
.194"
—
#12
.220"
1
—
⁄4"
.255"
0948-16-18-000003 Kit ERQC16 (3) ERQC20 (5)
ERQC20 Tap Collet
Part Number
2145-00-18-001410
2145-00-18-001680
2145-00-18-001940
2145-00-18-002200
2145-00-18-002550
0948-20-18-000005
ERQC25 & ERQC32 Tap Collets
ERQC25 Tap Collet
Part Number
2147-00-18-001410
2147-00-18-001680
2147-00-18-001940
2147-00-18-002200
2147-00-18-002550
2147-00-18-003180
2147-00-18-003810
2147-00-18-003230
2147-00-18-003670
—
0948-25-18-000009
Size Range
Tap Size Shank
#0 - 6
.141"
#8
.168"
#10
.194"
#12
.220"
1
⁄4"
.255"
5
⁄16"
.318"
3
⁄8"
.381"
7
⁄16"
.323"
1
⁄2"
.367"
9
⁄16"
.429"
Set of 9
Set of 10
ERQC32 Tap Collet
Part Number
2149-00-18-001410
2149-00-18-001680
2149-00-18-001940
2149-00-18-002200
2149-00-18-002550
2149-00-18-003180
2149-00-18-003810
2149-00-18-003230
2149-00-18-003670
2149-00-18-004290
0948-32-18-000010
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 44
ERTC Floating Tap Collets & ERTCSP Multi-Split Tap Collets
The Floating Solid Tap Collet reduces tap breakage because of its tension compensation feature.
This feature is needed when using synchronous
(rigid) feed or machines requiring axial tension
compensation.
The collet is removed to change taps. The tap is
secured with set screws which go through the sides
of the square drive hole in the collet.
Floating ERTC Tap Collets
ERTC25 Floating
Size Range
Tap Collets
Tap Size
Shank
2097-00-18-001410 #0 - #6
.141"
2097-00-18-001680
#8
.168"
2097-00-18-001940
#10
.194"
2097-00-18-002200
#12
.220"
1
⁄4"
.255"
2097-00-18-002550
5
⁄16"
.318"
2097-00-18-003180
3
⁄8"
.381"
2097-00-18-003810
7
2097-00-18-003230
⁄16"
.323"
1
⁄2"
.367"
2097-00-18-003670
9
⁄16"
.429"
2097-00-18-004290
5
2097-00-18-004800
⁄8"
.480"
ERTC32 Floating
Tap Collets
Tap Size
Shank
2099-00-18-001680
#8
.168"
2099-00-18-001940
#10
.194"
2099-00-18-002200
#12
.220"
1
⁄4"
.255"
2099-00-18-002550
5
⁄16"
.318"
2099-00-18-003180
3
⁄8"
.381"
2099-00-18-003810
7
2099-00-18-003230
⁄16"
.323"
1
⁄2"
.367"
2099-00-18-003670
9
⁄16"
.429"
2099-00-18-004290
5
2099-00-18-004800
⁄8"
.480"
.437"
2099-00-18-004370 1⁄8" NPT
Floating ERTC Tap Collets
ERTC11/12 Floating
Size Range
Tap Collets
Tap Size
Shank
1919-00-18-001410
#0 - #6
.141"
ERTC16 Floating
Tap Collets
Tap Size
Shank
1921-00-18-001410
#0 - #6
.141"
1921-00-18-001680
#8
.168"
1921-00-18-001940
#10
.194"
ERTC20 Floating
Tap Collets
Tap Size
Shank
1923-00-18-001410
#0 - #6
.141"
1923-00-18-001680
#8
.168"
1923-00-18-001940
#10
.194"
1923-00-18-002200
#12
.220"
1
⁄4"
.255"
1923-00-18-002550
ANSI Metric Taps – Shank Sizes
M 1 to M3.5
M4
M4.5 & M5
M6 & M6.3
M7 & M8
M10
M12
M14
ERTCSP-Style Rigid Tap Collets with Square Drive
These Tap Collets are multi-split with
more shank bearing surface than
ER/DR collets. The bore is the
exact size of the shank with a
square broached hole to eliminate
tap slippage.
Note: Available sealed for thru-coolant
capabilities. Metric (DIN), Japanese
(JIS) and Chinese (CIC) standard sizes
on request.
(See Brochure 2351 for shank sizes)
ERTCSP16 & ERTCSP20 Tap Collets
ERTCSP16 Tap
Size Range
ERTCSP20 Tap
Collet Part Number Tap Size Shank
Collet Part Number
1913-19-18-001410
#0 - 6
.141"
1915-19-18-001410
1913-19-18-001680
#8
.168"
1915-19-18-001680
1913-19-18-001940
#10
.194"
1915-19-18-001940
1913-19-18-002200
#12
.220"
1915-19-18-002200
1
1913-19-18-002550
⁄4"
.255"
1915-19-18-002550
5
—
⁄16"
.318"
1915-19-18-003180
3
—
⁄8"
.381"
1915-19-18-003810
7
—
⁄16"
.323"
1915-19-18-003230
1
—
⁄2"
.367"
1915-19-18-003670
0949-16-18-000005 Kit ER16 (5) Kit ER20 (9) 0949-20-18-000009
.141"
.168"
.194"
.255"
.318"
.381"
.367"
.429"
ERTCSP25 & ERTCSP32 Tap Collets
ERTCSP25 Tap
Collet Part Number
2095-19-18-001680
2095-19-18-001940
2095-19-18-002200
2095-19-18-002550
2095-19-18-003180
2095-19-18-003810
2095-19-18-003230
2095-19-18-003670
2095-19-18-004290
2095-19-18-004800
—
—
—
0949-25-18-00010
Size Range
Tap Size Shank
#8
.168"
#10
.194"
#12
.220"
1
⁄4"
.255"
5
⁄16"
.318"
3
⁄8"
.381"
7
⁄16"
.323"
1
⁄2"
.367"
9
⁄16"
.429"
5
⁄8"
.480"
11
⁄16"
.542"
3
⁄4"
.590"
13
⁄16"
.652"
Set of 10
Set of 13
ERTCSP32 Tap
Collet Part Number
1917-19-18-001680
1917-19-18-001940
1917-19-18-002200
1917-19-18-002550
1917-19-18-003180
1917-19-18-003810
1917-19-18-003230
1917-19-18-003670
1917-19-18-004290
1917-19-18-004800
1917-19-18-005420
1917-19-18-005900
1917-19-18-006520
0949-32-18-000013
Tap Size
L1
ERTCSP20
L2
ERTCSP25
ERTCSP32
0-6 - 1/4"
5/16 - 1/2"
9/16 - 7/8"
1"
0.709"
0.866"
0.984
1.102"
0.531"
0.374"
—
—
0.630"
0.472"
0.374"
—
0.866"
0.709"
0.591"
—
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
VDI Toolholders
Hardinge Lathes
Page 45
Manual VDI Tool Presetter System
The Manual VDI Tool Presetter System minimizes downtime during job setup by allowing the operator to
preset VDI tools outside of the machine during cycling. The unit is used to measure height and length of tool
position. Available as a complete package with choice of VDI 30 or VDI 40 toolholder block, or as individual
components as shown below:
Description
Part Number
VDI Tool Presetter System with VDI 30 Toolholder Block
VDI Tool Presetter System with VDI 40 Toolholder Block
7500-00-00-00-V30B
7500-00-00-00-V40B
VDI 30 Toolholder Block with Centerline Block and Allen Wrench
VDI 40 Toolholder Block with Centerline Block and Allen Wrench
7500-00-00-00-V30A
7500-00-00-00-V40A
12” Height Gage
Centerline Block
VDI 30 Toolholder Block
VDI 40 Toolholder Block
12" x 18" x 3" Granite Surface Plate
CE 7729000
7500-00-00-00-2V40
7500-00-00-00-1V30
7500-00-00-00-1V40
CE 5501218
Toolholder and cutting tool supplied by customer.
Specifications subject to change without notice due to ongoing research and development.
For additional information and prices, request brochure 2363.
12" Height Gage
VDI 40
Toolholder
Block
VDI 30 Toolholder
Block
4.875" wide x 4.875"
long
1.1813"/30mm ID bore
4.875" wide x
4.875" long
1.5750"/40mm
ID bore
Centerline
Block
12" x 18" Granite
Surface Plate
Allen
Wrench
(millimeters shown in parentheses)
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.
Hardinge Inc.
Elmira, New York 14902-1507 USA
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
VDI Toolholders
Hardinge Lathes
Page 46
WORLDWIDE
MANUFACTURER
OF MACHINE TOOLS
AND WORKHOLDING /
INDUSTRIAL PRODUCTS
(millimeters shown in parentheses)
Call 800-843-8801
Monday—Friday, 8:00 am to 8:00 pm
Eastern Standard Time for FAST delivery!
Hardinge Inc.
Elmira, New York 14902-1507 USA
© Hardinge Inc., 2003
All specifications are subject to change without notice.
All marks indicated by ® and ™ are trademarks of Hardinge Inc.
unless otherwise indicated.

Similar documents

Hardinge Tool Holders, Toolholder Collets and Bushings Catalog

Hardinge Tool Holders, Toolholder Collets and Bushings Catalog The HDB-Style Bushing has a knurled shoulder for easy installation and removal. A flat is milled on the OD of the bushing where the toolholder or turret set screws clamp on the bushing. This style ...

More information