LT-RPT catalogue

PLASMA CUTTING
The new series of Torches
with High Frequency Start
LT-50
LT-70
LT-90
LT-120
LT-150
LT-81
LT-101
LT-141
LT-151
Suitable for: CEBORA® P50
Suitable for: CEBORA® P70
Suitable for: CEBORA® CP90 - CP91
Suitable for: LINCOLN® T100
Suitable for: CEBORA® P150 - CP160
Suitable for: TRAFIMET® A80 - Ergocut A81
Suitable for: TRAFIMET® A90 - Ergocut A101
Suitable for: TRAFIMET® A140 - Ergocut A141
Suitable for: TRAFIMET® A145 - Ergocut A151
Higher performances
Cleaner cut
Faster speed
TEC.MO. s.r.l. Via Rio Fabbiani 8 - 40067 RASTIGNANO - BOLOGNA - ITALY E-mail: tecmo@tecmo.it
INDEX
The new series of Torches
with High Frequency Start
LT-50
Suitable for: CEBORA® P50 ________________________
page ........... 4
LT-70
Suitable for: CEBORA® P70 ________________________
page ........... 6
LT-90
Suitable for: CEBORA® CP90 - CP91 ________________
page ........... 8
LT-120
Suitable for: LINCOLN® T100 _______________________
page ......... 10
LT-150
Suitable for: CEBORA® P150 - CP160 ________________
page ......... 12
LT-81
Suitable for: TRAFIMET® A80 - Ergocut A81 ____________
page ......... 14
LT-101
Suitable for: TRAFIMET® A90 - Ergocut 101 ____________
page ......... 16
LT-141
Suitable for: TRAFIMET® A140 - Ergocut 141 ___________
page ......... 18
LT-151
Suitable for: TRAFIMET® R145 - Ergocut A151 __________
page ......... 20
Torches and Leads _______________________________________
page ......... 22
s.r.l.
Via Rio Fabbiani 8 - 40067 RASTIGNANO - BOLOGNA - ITALY
E-mail: tecmo@tecmo.it
plasma cutting torches
2013.10.A-LT-RPT
LT-50
Suitable for: CEBORA® P50
Max Current :
50 Amps
Duty Cycle:
50 Amps- 60%
Gas:
Air
Gas Pressure: 70 psi ( 4.5-5.0 bar )
Gas Flow:
250 scfh ( 120 lpm )
Post Flow Time: 90 sec. recommended
Pilot :
Electrode to Tip
Ignition:
HF
1
3
3a
2
2a
Standard Layout
4
9
5
6
5
8
7
12
10
11
12
13
4
IEC 60974-7
TEC.MO. srl is in no way affiliated with CEBORA®. The parts advertised for sale are not genuine CEBORA® parts, but are parts made for and by TEC.MO.
srl. Reference to CEBORA® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine CEBORA® parts in
place of TEC.MO. srl parts.
plasma cutting torches
2013.10.A-LT-RPT
LT-50
Replacement Parts Suitable for: CEBORA® P50
Torch parts
Item#
ref.
Catalog # Description
1
01001/KIT Torch Head complete with handle
2
01001
Hand torch head
2a
01000.60
O - Ring
3
09606
Handgrip with microswitch
3a
07301.20
Switch
52512/L
Electrode - Hf.
60001
Swirl ring
1304
51100
Tip ø 1.0
1396
51095
Tip long life ø 1.0
51100/S
Tip long life ø 1.1
51099
Flat tip ø 1.0.
4
1521
5
6
7
8
1305
51098
Conical tip ø 1.0 (Lo - Amp.)
9
1518
52513/L
Extended electrode - Hf.
10
1370
51102
Extended tip, ø 1.0
1395
51095/L
Extended tip, long life ø 1.0
51102/S
Extended tip, long life ø 1.1
11
1306
51101
Extended conical tip ø 1.0 (Lo - Amp.)
12
5.710.121
60320
Nozzle retaining cap
51965
Shield cup, hand ( for extended tips 51095/L, 51102/S and 51101 )
166
51850
Circle cutting attachment
154
51806
Cutting guide
13
Accessories
Torches and Leads
see page # 22
TEC.MO. s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: tecmo@tecmo.it
5
plasma cutting torches
LT-70
2013.10.A-LT-RPT
Suitable for: CEBORA® P70
Max Current :
70 Amps
Duty Cycle:
70 Amps- 60%
Gas:
Air
Gas Pressure: 70 psi ( 4.5-5.0 bar )
Gas Flow:
275 scfh ( 130 lpm )
Post Flow Time: 90 sec. recommended
Pilot :
Electrode to Tip
Ignition:
HF
1
3
3a
2a
2
19
2b
4
9
5
5
6
7
8
11
12
10
16
11
14
17
18
Standard Layout
13
15
6
IEC 60974-7
TEC.MO. srl is in no way affiliated with CEBORA®. The parts advertised for sale are not genuine CEBORA® parts, but are parts made for and by TEC.MO.
srl. Reference to CEBORA® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine CEBORA® parts in
place of TEC.MO. srl parts.
plasma cutting torches
LT-70
2013.10.A-LT-RPT
Replacement Parts Suitable for: CEBORA® P70
Torch parts
Item#
ref.
Catalog # Description
1
01071/KIT Torch Head complete with handle
2
2a
2b
3
3a
4
5
6
01071
01000.60
01070.42
09606
07301.20
52551
60001
51100.09
51095
51100/S
51096
51100.12
51099
51099.12
51098
51098.12
52553
51102.09
51095/L
51102/S
51096/L
60321
51901
60363
51970
51971
51097.10
51097.11
51097.12
60321C
60503L
Hand torch head
O - Ring
Diffusor
Handgrip with microswitch
Switch
Electrode
Swirl ring
Tip ø 0.9 - 35A
Tip long life ø 1.0 - 50A
Tip long life ø 1.1 - 60A
Tip long life ø 1.2 - 70A
Tip ø 1.2 - 70A
Flat tip ø 1.0
Flat tip ø 1.2
Conical tip ø 1.0 (Lo - Amp.)
Conical tip ø 1.2
Extended electrode
Extended tip ø 0.9 - 35A
Extended tip long life ø 1.0 - 50A
Extended tip long life ø 1.1 - 60A
Extended tip long life ø 1.2 - 70A
Nozzle retaining cap
Spacer spring
Double pointed spacer
Shield cup, hand (for extended tips 51102.09 and 51095/L)
Spacer for contact cutting, hand (for extended tips 51102/S and 51096/L)
Extended Tip, 50A, Shielded
Extended Tip, 60A, Shielded
Extended Tip, 70A, Shielded
Shield Cup Body CW
Extended Shield Cap 50-70A
Wrench for electrode
51849
51801
Circle cutting attachment
Cutting guide
3.065204
1402
1309
1396
1308
7
8
1305
9
10
1368
1366
1395
11
12
13
14
15
16
5.710.171
1394
17
18
19
3.045.012
Accessories
166-70
154-70
TEC.MO. s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: tecmo@tecmo.it
7
plasma cutting torches
2013.10.A-LT-RPT
LT-90
Suitable for: CEBORA® CP90 - CP91
Max Current :
90 Amps
Duty Cycle:
90 Amps- 60%
Gas:
Air
Gas Pressure: 70 psi ( 4.5-5.0 bar )
Gas Flow:
340 scfh ( 160 lpm )
Post Flow Time: 90 sec. recommended
Pilot :
Electrode to Tip
Ignition:
HF
1
3
3a
2a
2
15
2b
4
5
7
6
11
12
8
Standard Layout
9
13
14
10
IEC 60974-7
8
TEC.MO. srl is in no way affiliated with CEBORA®. The parts advertised for sale are not genuine CEBORA® parts, but are parts made for and by TEC.MO.
srl. Reference to CEBORA® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine CEBORA® parts in
place of TEC.MO. srl parts.
plasma cutting torches
2013.10.A-LT-RPT
LT-90
Replacement Parts Suitable for: CEBORA® CP90 - CP91
Torch parts
Item#
ref.
Catalog # Description
1
01091/KIT Torch Head complete with handle
2
01091
Hand torch head
01000.60
O - Ring
2b
01090.42
Diffusor
3
09606
Handgrip with microswitch
3a
07301.20
Switch
52553
Electrode
5
60001
Swirl ring
6
51090
Tip long life ø 1.2 -20-50A (for use with item. 9 only)
7
51092
Tip long life ø 1.2 - 50-70A (for use with item. 9-10 only)
51093
Tip long life ø 1.3 - 70-90A (for use with item. 9-10 only)
8
60322
Nozzle retaining cap
9
51972
Shield cup, hand
10
51973
Spacer for contact cutting, hand
11
51097.10
Extended Tip, 50A, Shielded
51097.11
Extended Tip, 60A, Shielded
51097.12
Extended Tip, 70A, Shielded
51097.13
Extended Tip, 90A, Shielded
12
60322C
Shield Cup Body CCW
13
60503L
Extended Shield Cap 50-70A
14
60504L
Extended Shield Cap 80-100A
60368
Wrench for electrode
163
51848
Circle cutting attachment
153
51818
Cutting guide
2a
4
15
3.160.067
1368
3.045.012
Accessories
Torches and Leads
see page # 22
TEC.MO. s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: tecmo@tecmo.it
9
plasma cutting torches
2013.10.A-LT-RPT
LT-120
Suitable for: LINCOLN® T100
Max Current :
100Amps
Duty Cycle:
100 Amps - 60%
Gas:
Air
Gas Pressure: 70 psi ( 4.5-5.0 bar )
Gas Flow:
380 scfh ( 180 lpm )
Post Flow Time: 90 sec. recommended
Pilot :
Electrode to Tip
Ignition:
HF
1
3
3a
2a
2
2b
27
2c
9
8
28
4
5
5
6
7
10
11
11
Standard Layout
12
23
13
14
13
17
13
13
13
18
19
24
13
15
19
20
21
16
22
25
26
10
IEC 60974-7
TEC.MO. srl is in no way affiliated with LINCOLN®. The parts advertised for sale are not genuine LINCOLN® parts, but are parts made for and by TEC.MO.
srl. Reference to LINCOLN® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine LINCOLN® parts
in place of TEC.MO. srl parts.
plasma cutting torches
2013.10.A-LT-RPT
LT-120
Replacement Parts Suitable for: LINCOLN® T100
Torch parts
Item#
ref.
1
2
2a
W0300121
2b
2c
W0300122
3
W0300103
3a
4
W0300123
5
W0300124
6
W0300174
W0300175
W0300128
7
W0300135
W0300137
8
9
W0300133
10
W0300134
11
W0300178
W0300179
12
W0300129
13
W0300138
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
W0300244
W0300245
W0300180
W0300182
W0300183
W0300184
WO300130
W0300131
W0300177
W0300132
W0300142
W0300119
Catalog #
01201/KIT
01201
02000.60
60085
06004
09706
07301.20
52540
60020
51140/S
51141/S
51142/S
51144.24
51410
51411
06005
52549
51148
51148.13
51148.16
60328
60348
60348/V
51952
51911
51953
51950
51930
51957
51958
51974
51959
51910
60370
60371
60373
60369
60368
Description
Torch Head complete with handle
Hand torch head
O - Ring
Front insulator
Diffusor
Handgrip with microswitch
Switch
Electrode
Swirl ring
Tip long life ø 1,10 ( replaces W0300125 )
Tip long life ø 1,35 ( replaces W0300126)
Tip long life ø 1,60 ( replaces W0300127 )
Gouging tip ø 2,4
Contact tip ø 1,35
Contact tip ø 1,6
Extended diffusor
Extended electrode
Extended tip ( for contact cutting max. 50A )
Extended tip ø 1,35 - 90A - ( for 51958 + 51959 or 60380 )
Extended tip ø 1,6 - 120A - ( for 51958 + 51959 or 60380 )
Nozzle retaining cap
Contact nozzle retaining cap
Contact nozzle retaining cap, Max.life
Spring holder protection nut
Spacer spring for code 51952
Gouging spacer
Spacer for contact cutting, hand
Spacer for contact cutting, hand
Shield cup, hand ( max. 50A )
Spacer for contact cutting, hand
Spacer for extended tips High Amp.
Locking nut
Spacer spring
Double pointed spacer
Crown spacer
Gouging spacer
Extractor for swirl ring
Wrench for electrode
51851
51807
Circle cutting attachment
Cutting guide
Accessories
Torches and Leads
see page # 22
TEC.MO. s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: tecmo@tecmo.it
11
plasma cutting torches
2013.10.A-LT-RPT
LT-150
Suitable for: CEBORA® P150 - CP160
Max Current :
150Amps
Duty Cycle:
150 Amps - 60%
Gas:
Air
Gas Pressure: 70 psi ( 4.5-5.0 bar )
Gas Flow:
470 scfh ( 220 lpm )
Post Flow Time: 90 sec. recommended
Pilot :
Electrode to Tip
Ignition:
HF
1
3
3a
2
2a
2b
27
2c
8
28
9
Standard Layout
4
5
5
6
12
7
13
13
13
10
13
11
13
11
13
23
14
17
18
19
24
15
25
26
12
19
20
21
16
22
IEC 60974-7
TEC.MO. srl is in no way affiliated with CEBORA®. The parts advertised for sale are not genuine CEBORA® parts, but are parts made for and by TEC.MO.
srl. Reference to CEBORA® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine CEBORA® parts in
place of TEC.MO. srl parts.
plasma cutting torches
LT-150
2013.10.A-LT-RPT
Replacement Parts Suitable for: CEBORA® P150 - CP160
Torch parts
Item#
ref.
1
2
2a
1398
2b
2c
1378
3
3a
4
1376
5
1377
6
1371
1372
1373
1374
1375
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
1517
1369
1389
1386
1408
1406
1509
3.045.010
Accessories
169
155
Catalog #
02001/KIT
02001
02000.60
60080
05004
09706
07301.20
52540
60020
51140/S
51141/S
51142/S
51143/S
51144
51410
51411
51412
05005
52549
51148
51148.13
51148.16
51148.18
60330
60350
60350/V
51952
51911
51953
51950
51930
51957
51958
51974
51959
51910
60370
60371
60373
60369
60368
Description
Torch Head complete with handle
Hand torch head
O - Ring
Front insulator
Diffusor
Handgrip with microswitch
Switch
Electrode
Swirl ring
Tip long life ø 1,10
Tip long life ø 1,35
Tip long life ø 1,60
Tip long life ø 1,80
Gouging tip ø 3.0
Contact tip ø 1,35
Contact tip ø 1,6
Contact tip ø 1,8
Extended diffusor
Extended electrode
Extended tip ( for contact cutting max. 50A )
Extended tip ø 1,35 - 90A - ( for 51958 + 51959 or 60380 )
Extended tip ø 1,6 - 120A - ( for 51958 + 51959 or 60380 )
Extended tip ø 1,8 - 150A - ( for 51958 + 51959 or 60380 )
Nozzle retaining cap
Contact nozzle retaining cap
Contact nozzle retaining cap, Max.life
Spring holder protection nut
Spacer spring for code 51952
Gouging spacer
Spacer for contact cutting, hand
Spacer for contact cutting, hand
Shield cup, hand ( max. 50A )
Spacer for contact cutting, hand
Spacer for extended tips High Amp.
Locking nut
Spacer spring
Double pointed spacer
Crown spacer
Gouging spacer
Extractor for swirl ring
Wrench for electrode
51851
51807
Circle cutting attachment
Cutting guide
Torches and Leads
see page # 22
TEC.MO. s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: tecmo@tecmo.it
13
plasma cutting torches
LT-81
2013.10.A-LT-RPT
Suitable for: TRAFIMET® A80 - Ergocut A81
Max Current :
80 Amps
Duty Cycle:
80 Amps- 60%
Gas:
Air
Gas Pressure: 70 psi ( 4.5-5.0 bar )
Gas Flow:
340 scfh ( 160 lpm )
Post Flow Time: 90 sec. recommended
Pilot :
Electrode to Tip
Ignition:
HF
1
3
3a
2
2a
2b
7
4
8
Standard Layout
5
6
9
10
12
11
13
14
IEC 60974-7
TEC.MO. srl is in no way affiliated with TRAFIMET®. The parts advertised for sale are not genuine TRAFIMET® parts, but are parts made for and by TEC.MO.
srl. Reference to TRAFIMET® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine TRAFIMET® parts
in place of TEC.MO. srl parts.
plasma cutting torches
LT-81
2013.10.A-LT-RPT
Replacement Parts Suitable for: TRAFIMET® A80 - Ergocut A81
Torch parts
Item#
1
ref.
Catalog # Description
PF 0140
06802/KIT Hand Torch Head complete with handle
2
06802
Hand torch head
2a
EA 0125
07300.60
O - Ring
2b
FH 0560
06801.42
Diffusor
09706
Handgrip with switch
3
3a
BX 0020
07301.20
Switch
4
PR 0109
52580/S
Electrode - Maximum Life
5
PE 0107
60029
Swirl ring
6
PD 0105-10
51170
Tip 1.0
PD 0105-11
51172
Tip 1.1
PD 0105-12
51172.12
Tip 1.2
7
FH 0561
06801.43
Extended diffusor
8
PR 0115
52581/S
Extended electrode - Maximum Life
9
PD 0106-10
51171.10
Extended tip 1.0
PD 0106-12
51173
Extended tip 1.2
10
PC 0115
60384
Nozzle retaining cap
11
CV 0201
51976
Spacer for contact cutting
12
CV 0033
60378
Crown spacer
13
CV 0028
51902
Spacer spring
51861
Circle cutting attachment
51817
Cutting guide
Accessories
Torches and Leads
see page # 22
TEC.MO. s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: tecmo@tecmo.it
15
plasma cutting torches
2013.10.A-LT-RPT
LT-101
Suitable for: TRAFIMET® A90 - Ergocut 101
Max Current :
100Amps
Duty Cycle:
100 Amps - 60%
Gas:
Air
Gas Pressure: 70 psi ( 4.5-5.0 bar )
Gas Flow:
380 scfh ( 180 lpm )
Post Flow Time: 90 sec. recommended
Pilot :
Electrode to Tip
Ignition:
HF
1
3
3a
2
2a
2b
25
2c
7
26
8
4
Standard Layout
9
5
6
10
12
13
22
14
13
11
13
18
19
23
16
20
15
16
24
13
17
21
IEC 60974-7
TEC.MO. srl is in no way affiliated with TRAFIMET®. The parts advertised for sale are not genuine TRAFIMET® parts, but are parts made for and by TEC.MO.
srl. Reference to TRAFIMET® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine TRAFIMET® parts
in place of TEC.MO. srl parts.
plasma cutting torches
2013.10.A-LT-RPT
LT-101
Replacement Parts Suitable for: TRAFIMET® A90 - Ergocut 101
Torch parts
Item#
ref.
1
PF 0145
2
2a
EA 0131
2b
2c
3
BX 0020
3a
4
PR 0101
5
PE 0101
6
PD 0101-11
PD 0101-14
PD 0101-17
7
Catalog #
06001/KIT
06001
06000.60
60085
06004
09706
07301.20
52535
60030
51154
51155
51156
06005
Description
Torch Head complete with handle
Hand torch head
O - Ring
Front insulator
Diffusor
Handgrip with microswitch
Switch
Electrode
Swirl ring
Tip ø 1.1
Tip ø 1.4
Tip ø 1.7
Extended Diffusor
8
PR 0116
52530
Extended electrode
9
PE 0103
60031
Insulating spacer
10
PD 0111
51149
Extended tip ø 1.2 ( max 50A )
11
PD 0117-14
51149.14
Extended tip ø 1.4 - ( for use with item. 25+26 )
PD 0117-17
51149.17
Extended tip ø 1.7 - ( for use with item. 25+26 )
PD 0117-19
51149.19
Extended tip ø 1.9 - ( for use with item. 25+26 )
12
PC 0109/0111 60376
Nozzle retaining cap, long life
13
PC 0113/0130
PC 0113/0130
CV 0023
CV 0039
60386
60386/V
51940
51945
51952
51911
51950
51957
51958
51959
51910
60370
60371
60369
60368
Contact nozzle retaining cap
Contact nozzle retaining cap, Max.life
Spacer for contact cutting
Large spacer for contact cutting
Spring holder protection nut
Spacer spring for code 51952
Spacer for contact cutting, hand
Shield cup, hand ( max. 50A ) ( for use with item. 21 only )
Spacer for contact cutting, hand ( for use with item. 21 only )
Locking nut
Spacer spring
Double pointed spacer
Crown spacer
Extractor for swirl ring
Wrench for electrode
51851
51807
Circle cutting attachment
Cutting guide
14
15
16
17
18
19
20
21
22
23
24
25
26
CV 0008
CV 0009
CV
CV
CV
GR
0011
0012
0014
60
Accessories
Torches and Leads
see page # 22
TEC.MO. s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: tecmo@tecmo.it
17
plasma cutting torches
2013.10.A-LT-RPT
LT-141
Suitable for: TRAFIMET® A140 - Ergocut 141
Max Current :
150Amps
Duty Cycle:
150 Amps - 60%
Gas:
Air
Gas Pressure: 70 psi ( 4.5-5.0 bar )
Gas Flow:
470 scfh ( 220 lpm )
Post Flow Time: 90 sec. recommended
Pilot :
Electrode to Tip
Ignition:
HF
1
3
3a
2
2a
Standard Layout
2b
27
2c
8
7
4
28
9
5
6
12
23
24
10
13
14
13
13
20
16
13
18
15
25
11
21
22
17
26
18
18
IEC 60974-7
TEC.MO. srl is in no way affiliated with TRAFIMET®. The parts advertised for sale are not genuine TRAFIMET® parts, but are parts made for and by TEC.MO.
srl. Reference to TRAFIMET® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine TRAFIMET® parts
in place of TEC.MO. srl parts.
plasma cutting torches
2013.10.A-LT-RPT
LT-141
Replacement Parts Suitable for: TRAFIMET® A140 - Ergocut 141
Torch parts
Item#
ref.
1
PF 0155
2
EA 0131
2a
2b
2c
3
3a
BX 0020
4
PR 0101
5
PE 0101
6
PD 0101-11
PD 0101-14
PD 0101-17
PD 0101-19
PD 0101-30
7
8
PR 0116
9
PE 0103
10
PD 0111
11
PD 0117-14
PD 0117-17
PD 0117-19
12
PC 0101/0102
13
PC 0103/0131
PC 0103/0131
14
CV 0023
15
CV 0039
16
17
18
19
20
CV 0008
21
CV 0009
22
23
CV 0011
24
CV 0012
25
CV 0014
26
CV 0013
27
GR 60
28
Catalog #
06201/KIT
06201
06000.60
60080
05004
09706
07301.20
52535
60030
51154
51155
51156
51157
51158
05005
52530
60031
51149
51149.14
51149.17
51149.19
60375
60385
60385/V
51940
51945
51952
51911
51953
51950
51957
51958
51959
51910
60370
60371
60373
60369
60368
Description
Torch Head complete with handle
Hand torch head
O - Ring
Front insulator
Diffusor
Handgrip with microswitch
Switch
Electrode
Swirl ring
Tip ø 1.1
Tip ø 1.4
Tip ø 1.7
Tip ø 1.9
Gouging tip ø 3.0
Extended Diffusor
Extended electrode
Insulating spacer
Extended tip ø 1.2 ( max 50A )
Extended tip ø 1.4 - ( for use with item. 25+26 )
Extended tip ø 1.7 - ( for use with item. 25+26 )
Extended tip ø 1.9 - ( for use with item. 25+26 )
Nozzle retaining cap, long life
Contact nozzle retaining cap
Contact nozzle retaining cap, Max.life
Spacer for contact cutting
Large spacer for contact cutting
Spring holder protection nut
Spacer spring for code 51952
Gouging spacer
Spacer for contact cutting, hand
Shield cup, hand ( max. 50A ) ( for use with item. 21 only )
Spacer for contact cutting, hand ( for use with item. 21 only )
Locking nut
Spacer spring
Double pointed spacer
Crown spacer
Gouging spacer
Extractor for swirl ring
Wrench for electrode
51851
51807
Circle cutting attachment
Cutting guide
Accessories
Torches and Leads
see page # 22
TEC.MO. s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: tecmo@tecmo.it
19
plasma cutting torches
LT-151
2013.10.A-LT-RPT
Suitable for: TRAFIMET® R145 - Ergocut A151
Max Current :
150Amps
Duty Cycle:
150 Amps - 60%
Gas:
Air
Gas Pressure: 70 psi ( 4.5-5.0 bar )
Gas Flow:
470 scfh ( 220 lpm )
Post Flow Time: 90 sec. recommended
Pilot :
Electrode to Tip
Ignition:
HF
1
3
3a
2
2a
2b
2c
Standard Layout
7
8
5
4
5
10
9
6
11
14
12
15
14
18
14
19
16
14
20
13
17
20
21
IEC 60974-7
TEC.MO. srl is in no way affiliated with TRAFIMET®. The parts advertised for sale are not genuine TRAFIMET® parts, but are parts made for and by TEC.MO.
srl. Reference to TRAFIMET® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine TRAFIMET® parts
in place of TEC.MO. srl parts.
plasma cutting torches
LT-151
2013.10.A-LT-RPT
Replacement Parts Suitable for: R145 - Ergocut A151
Torch parts
Item#
1
ref.
Catalog # Description
PF 0160
06901/KIT Hand Torch Head complete with handle
2
06901
Hand torch head
06000.60
O - Ring
2b
60080
Front insulator
2c
05004
Diffusor
3
09706
Handgrip with switch
2a
EA 0131
3a
BX 0020
07301.20
Switch
4
PR 0111
52534
Electrode
5
PE 0103
60031
Insulating spacer
6
PD 0109-14
51241
Tip ø 1.4
PD 0109-16
51242
Tip ø 1.6
PD 0109-18
51243
Tip ø 1.8
PD 0109-30
51244
Gouging tip ø 3.0
05005
Extended Diffusor
7
8
PR 0116
52530
Extended electrode
9
PD 0111
51149
Extended tip ø 1.2 ( max 50A )
10
PD 0117-14
51149.14
Extended tip ø 1.4 - ( for use with item. 25+26 )
PD 0117-17
51149.17
Extended tip ø 1.7 - ( for use with item. 25+26 )
PD 0117-19
51149.19
Extended tip ø 1.9 - ( for use with item. 25+26 )
11
PC 0120
60387
Nozzle retaining cap
12
BW 0139
60388
Nozzle shield
13
CV 1105
60379
Cage spacer
14
PC 0103/0131 60385
Contact nozzle retaining cap
PC 0103/0131 60385/V
Contact nozzle retaining cap, Max.life
15
51952
Spring holder protection nut
16
51911
Spacer spring for code 51952
17
51953
Gouging spacer
18
51950
Spacer for contact cutting, hand
19
CV 0008
51957
Shield cup, hand ( tip max. 50A ) (for use with item. 26 only )
20
CV 0009
51958
Spacer for contact cutting, hand (for use with item. 26 only )
51959
Locking nut
51851
Circle cutting attachment
51807
Cutting guide
21
Accessories
Torches and Leads
see page # 22
TEC.MO. s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: tecmo@tecmo.it
21
plasma cutting torches
2013.10.A-LT-RPT
LT-Torches
LT-50 Suitable for: CEBORA® P50
ref.
1526
1574
1344
Catalog #
03050LT
03051LT
03150LT
03151LT
03240
03250
Description
Hand torch complete with 6 mts cable ( 1/8" connection )
Hand torch complete with 6 mts cable ( central connector )
Hand torch complete with 12 mts cable ( 1/8" connection )
Hand torch complete with 12 mts cable ( central connector )
Air and power cable 6 mts 1/8"
Air and power cable 12 mts 1/8"
LT-70 Suitable for: CEBORA® P70
ref.
1564
1573
1573.20
1344
Catalog #
03070LTS
03071LTS
03170LTS
03171LTS
03240/S
03250/S
Description
Hand torch complete with 6 mts cable ( 1/8" connection )
Hand torch complete with 6 mts cable ( central connector )
Hand torch complete with 12 mts cable ( 1/8" connection )
Hand torch complete with 12 mts cable ( central connector )
Air and power cable 6 mts 1/8"
Air and power cable 12 mts 1/8"
LT-90 Suitable for: CEBORA® CP90 - CP91
ref.
1215
1214
1215
1214.20
Catalog #
03090LTS
03091LTS
03190LTS
03191LTS
03092/S
03192/S
Description
Hand torch complete with 6 mts cable ( 1/8" connection )
Hand torch complete with 6 mts cable ( central connector )
Hand torch complete with 12 mts cable ( 1/8" connection )
Hand torch complete with 12 mts cable ( central connector )
Air and power cable 6 mts 1/8" ( 1/8" connection )
Air and power cable 12 mts 1/8" ( 1/8" connection )
LT-120 Suitable for: LINCOLN® T100
ref.
W0400052
W0400037
W0300140
W'0300141
Catalog #
01252LTS
01352LTS
04241/S
04251/S
Description
Hand torch complete with 6 mts cable (central connector)
Hand torch complete with 12 mts cable (central connector)
Air and power cable 6 mts 1/8"
Air and power cable 12 mts 1/8"
LT-150 Suitable for: CEBORA® P150 - CP160
ref.
1576
1578
1226
1226.20
22
Catalog #
04051LTS
04151LTS
04053LTS
04153LTS
04240/S
04250/S
Description
Hand torch complete with 6 mts cable (central connector)
Hand torch complete with 12 mts cable (central connector)
Hand torch CP-160 complete with 6 mts cable (central connector)
Hand torch CP-160 complete with 12 mts cable (central connector)
Air and power cable 6 mts 1/8"
Air and power cable 12 mts 1/8"
plasma cutting torches
2013.10.A-LT-RPT
LT-Torches
LT-81 Suitable for: TRAFIMET® A80 - Ergocut A81
ref.
PA 170/1400/1404
PA 1402
PH 0130/0132
Catalog #
06820LT
06821LT
06880
04270
Description
Hand torch 6 mts. cable ( 3/8G connection )
Hand torch 6 mts. cable ( central connector )
Air and power cable 6 mts. ( 3/8G )
End Fitting (1/4G )
LT-101 Suitable for: TRAFIMET® A90 - Ergocut 101
ref.
PA 109/1450/1454
PA 1452
PA 209
Catalog #
06050LT
06051LT
06150LT
06151LT
04224
04234
04270
Description
Hand torch complete with 6 mts. cable ( M14x1)
Hand torch complete with 6 mts. cable ( central connector )
Hand torch complete with 12 mts. cable ( M14x1)
Hand torch complete with 12 mts. cable ( central connector )
Air and power cable 6 mts. (M14x1)
Air and power cable 12 mts. (M14x1)
End Fitting (1/4G )
LT-141 Suitable for: TRAFIMET® A140 - Ergocut 141
ref.
PA 101/1500/1502
PA 1504
PA 102/1501
PA 1505
Catalog #
06250LT
06251LT
06350LT
06351LT
04220
04230
04270
Description
Hand torch complete with 6 mts. cable ( M14x1)
Hand torch complete with 6 mts. cable ( central connector )
Hand torch complete with 12 mts. cable ( M14x1)
Hand torch complete with 12 mts. cable ( central connector )
Air and power cable 6 mts. (M14x1)
Air and power cable 12 mts. (M14x1)
End Fitting (1/4G )
LT-151 Suitable for: TRAFIMET® R145 - Ergocut A151
ref.
PA 129/1550/1552
PA 1554
PA 130/1551
PA 1555
Catalog #
06920LTS
06921LTS
06930LTS
06931LTS
04220/S
04230/S
04270
Description
Hand torch 6 mts. cable (M14x1)
Hand torch 6 mts. cable ( central connector )
Hand torch 12 mts. cable (M14x1)
Hand torch 12 mts. cable ( central connector )
Air and power cable 6 mts. ( M14x1)
Air and power cable 12 mts. (M14x1)
End Fitting (1/4G )
Torches with different cable covers available on request.
TEC.MO. s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: tecmo@tecmo.it
23