4-5 m4 thread styli

H-1000-3200-08-B
STYLI
AND ACCESSORIES
TECHNICAL SPECIFICATIONS
INTRODUCTION
This guide contains a comprehensive
range of styli for CMM, CNC
machine tool and scanning probes,
from the world leader in probing
technology.
● Guaranteed to ensure maximum
probe performance
● Styli for M2, M3, M4 and M5
threaded probes
● Wide range of styli available to
measure and scan diverse and
complex components
● Choice of styli materials to give
optimum performance - graphite
reinforced, ceramic, steel or
tungsten carbide
● Custom stylus design and
manufacturing service for
specialist applications
● Styli designed by Renishaw are
manufactured to ISO 9001
standards
A stylus is that part of the probe
which makes contact with the
component, causing the probe to
produce its output signal.
Renishaw has used its experience
in probe design for CMM, CNC
machine tool, and scanning
applications, to develop a
comprehensive range of styli that
complements the probe itself. Styli,
previously only available for special
applications, have recently been
incorporated into the standard
range.
Renishaw has also developed
spherical form styli for scanning
applications where extremely
accurate copying is essential.
This brochure highlights the critical
features of each stylus and enables
selection of the best design for
every application.
The type and size of stylus to be
used is dictated by the feature to
be measured. In all cases,
maximum rigidity and sphericity of
the stylus tip are essential. Great
care is taken to ensure that
location faces give maximum
stiffness, whilst stylus weights are
optimised by using a variety of
materials to suit a particular probe
and application.
The ruby stylus balls used on many
styli are manufactured in
Switzerland to Renishaw’s exacting
standards, and are drilled and
spigotted on to the stems to ensure
maximum integrity.
Using other manufacturers styli
often degrades performance due
either to poor ball roundness,
location, thread fits or overall
design. Such styli are prone to
excessive bending at the probe
trigger point and may have a greatly
reduced EWL (Effective Working
Length) due to tolerance mismatch.
The GF “High performance” range of
styli is constructed from specialised
carbon fibre reinforced material,
Renishaw GF, which combines
maximum stiffness, both
longitudinal and rotational, with low
massThis material has ideal thermal
and environmental stability, with
extremely high resistance to impact
and fracture. Probe trigger
performance is optimised
particularly when an application
demands a long stylus assembly.
The trigger force for all probes is
critical for accuracy, stylus carrying
capability and reliable operation,
and can be easily optimised using
Renishaw’s Gram Gauge.
1. USING THE STYLUS GUIDE AND CHOOSING YOUR STYLI
2. M2 STYLI
3. M3 STYLI
4. M4 STYLI AND TOOLSETTING STYLI
5. M5 STYLI
6. ACCESSORIES AND TECHNICAL SPECIFICATIONS
USING AND
CHOOSING STYLI
CONTENTS
1-1 CHOOSING YOUR STYLI
This book has been designed to be user-friendly so the styli are listed primarily by thread size then length and finally by ball size. For reasons of
clarity, Renishaw’s probes are listed below by thread size. The styli will also fit other manufacturers’ probes directly or by utilising one of the
special styli adaptors (see accessory section).
M2
M3
M4
M5*
TP200
TP2
TP20
TP6
MIP
TP1
TP7
SP600
TP800
MP1
MP3
MP4
MP6
MP7
MP8
MP9
MP10
MP11
MP12
MP700
LP2
CYCLONE
SP2
SP2-1
Probes from
Zeiss and Leitz
Renishaw probes are capable of using any of the smaller threaded styli by using the appropriate styli adaptors (see accessory section).
The performance and functionality of a probing system can be significantly influenced by the choice of stylus assembly used. Please refer to
individual product user documentation for recommended stylus choice and product limits.
*Manufactured by Renishaw approved suppliers.
CHOOSING STYLI FOR INSPECTION
In the majority of probing applications to maximise accuracy we
recommend that you:KEEP STYLI SHORT AND STIFF
The more the stylus bends or deflects, the lower the accuracy.
Probing with the minimum stylus length for your application is
recommended and where possible the use of one piece styli is
suggested. Probing with excessive styli/extension combinations
should therefore be avoided.
KEEP THE STYLUS BALL AS LARGE AS POSSIBLE
This will ensure maximum ball/stem clearance whilst providing a
greater yet rigid Effective Working Length (EWL). Using larger ruby
balls also reduces the effect of surface finish of the
component being inspected.
Effective Working Length (EWL) is the penetration that can be
achieved by any ruby ball stylus before its stem fouls against the
feature.
Generally the larger the ball diameter the greater the EWL
(See below).
OVERALL LENGTH
EWL
BALL/STEM
CLEARANCE
EWL can also be affected by assembly tolerances. For this reason
Renishaw styli are assembled to exacting standards in controlled
conditions.
CHOOSING STYLI FOR SCANNING
GENERAL
The choice of scanning styli will be dependent on the scanning
application and the type of scanning probe used.
Use a stylus which has the same diameter as the finished cutting
tool used to produce the part.
Keep the stylus as short as possible to prevent excessive bending,
but ensure the stylus is long enough to prevent scanning on the
shank.
APPLICATION CONSIDERATIONS
Use a ball ended stylus where possible.
If the part to be scanned has undercuts (which cause the ball to
become trapped) use a parallel sided stylus.
For a profile application where the height of the profile is not a
constant Z use a parallel sided stylus.
PROBE CONSIDERATIONS
The stylus force applied from the scanning probe should be a
maximum of 50 grams on the SP600/SPSM (Cyclone) probes and
1000 grams on the SP2 range of probes.
The weight of the stylus on the SP600/SPSM (Cyclone) probes
should not exceed 20 grams.
Some of the most commonly used styli for scanning have been
highlighted throughout the document by an ‘( † )’.
1-2 EXPLANATION OF STYLI TYPES - SECTIONS 2, 3, 4 and 5
RUBY BALL STYLI (See A)
DISC STYLI (See E)*
These are suitable for the majority of probing applications.They
incorporate highly spherical industrial ruby balls. Ruby is an
extremely hard ceramic material and hence wear of stylus balls is
minimised. It is also of low density keeping tip mass to a
minimum which avoids unwanted probe triggers caused by
machine motion or vibration. Ruby balls are available mounted on a
variety of materials including non-magnetic stainless steel, ceramic
and carbide, to maintain stiffness over the total range of styli.
These ‘thin sections’ of a large sphere are usually used to probe
undercuts and grooves.
A
Although probing with the “spherical edge” of a simple disc is
effectively the same as probing on or about the equator of a large
stylus ball, only a small area of this ball surface is available for
contact. Hence thinner discs require careful angular alignment to
ensure correct contact of the disc surface with the feature being
probed.
A simple disc requires datuming on only one diameter (usually in a
ring gauge) but limits effective probing to only X and Y
directions.
Adding a radius end roller allows you to datum and hence probe in
the Z direction, providing the centre of the ‘radius end roller’
extends beyond the diameter of the probe.
STAR STYLI (See B)*
These can be used to inspect a variety of different features.
Using star styli to inspect the extreme points of internal features
such as the sides or grooves in a bore, minimises the need to move
the probe, due to their multi-tip probing capability.
Each tip on a star stylus requires datuming in the same manner as a
single ball stylus.
The radius end roller can be datumed on a sphere or a slip gauge.
Rotating and locking the disc about its centre axis allows the ‘radius
end roller’ to be positioned to suit the application.
Disc may also have an M2 threaded centre to allow the fixing of a
centre stylus, giving the additional flexibility of probing the bottom
of deep bores (where access for the disc may be limited).
E
B
CYLINDER STYLI (See F)
POINTER STYLI (See C)*
These are used for probing holes in thin sheet material, probing
various threaded features and locating the centres of tapped holes.
These should not be used for conventional XY Probing.
Designed for the measurement of thread forms, specific points and
scribed lines (to lower accuracy).
The use of radius end pointer styli allows more accurate datuming
and probing of features, and can also be used to inspect the
location of very small holes.
Ball ended cylinder styli allow full datuming and probing in X, Y and
Z directions thus allowing surface inspection to be carried out.
C
F
D
STYLUS EXTENSIONS (See G)
CERAMIC HOLLOW BALL STYLI (See D)
These are ideal for probing deep features and bores in X, Y and Z
directions with the need to datum only one ball.
In addition, the effects of very rough surfaces can be averaged out
by probing with such a large diameter ball.
*Generally star, pointer and disc styli are not recommended for
use on machine tools.
These provide added probing penetration by extending the stylus
away from the probe.
However, using stylus extensions can reduce accuracy due to loss
of rigidity.
G
1-3 EXPLANATION OF STYLI TYPES - LISTED UNDER STYLI THREAD SIZE
TOOL DATUMING STYLI
CUSTOM DESIGN STYLI
The tolerances to which tools can be set depends upon the flatness
and parallelism of the stylus tip to the machine axis. Fine adjustment
is provided on all probes and probe holders to allow these settings
to be achieved.
Where rotating tools are to be datumed for diameter the tools must
be rotated in reverse to the cutting direction.
Renishaw will design and manufacture a specific stylus to suit your
requirements. Probe and application needs are fully considered.
(See section 6-7).
EXPLANATION OF STYLI ACCESSORIES - LISTED IN ACCESSORIES SECTION
5-WAY STYLUS CENTRE (See H)
STYLUS ADAPTORS (See K)
Maximum probing flexibility with a single probe is provided by a
stylus centre. Taking up to 5 styli of the same screw thread (M2,
M4 or M5), this accessory allows you to build styli configurations
to your own specifications.
These allow M2, M3 and M4 thread styli to be interchanged on all
touch trigger probes with only a few exceptions.
H
J
(With the M5/M4 adaptor and SATF6 adaptor, Renishaw styli may
also be used on other manufacturers’ probing systems).
Important points to note:
Using styli with a thread size smaller than that of the probe normally
reduces the probe accuracy due to lower stylus stiffness.
STYLUS KNUCKLE (See J)*
This accessory gives full adjustment in both the vertical and
horizontal planes, allowing the stylus to be orientated to probe
angled features. This is especially useful when the probe cannot be
correctly orientated by the probe head, or access for the head is
limited eg. under edges.
Using styli with a thread size larger than that of the probe may
cause false triggers.
M2
K
M3
L
M2
M3/M2
STYLUS KITS
Styli and accessories are available in a wide selection of sets
ranging from a small high precision set of the most frequently used
styli, to a fully comprehensive set to meet virtually every inspection
need.
Complete probing kits are also available which include a probe,
probe head, extension bars and styli.
All Renishaw stylus sets and probing kits can be custom made to
suit your requirements.
M3
M2/M3
UNIVERSAL DATUM SPHERE* (See L)
The Renishaw Universal Datum Sphere facilitates easy probe
datuming. The Datum ball mount enables orientation to suit a wide
variety of stylus configurations, this product is traceable to
NPL/ISO 9000 standards.
GRAM GAUGE
The gram gauge can be used to adjust, reset and check trigger force
settings on all standard Renishaw touch trigger probes.
Setting the optimum trigger force using the gram gauge maximises
probe performance.
*CMM probing applications only.
STYLUS TOOLS
Designed specifically for mounting styli correctly into probes and
for the construction of specialised stylus combinations. Stylus tools
are designed to yield or breakout when excessive tightening force is
applied avoiding damage to threads of both styli and probe.
2-0 M2 STYLI
Suitable for the following probes:
M4 STYLI
M5 STYLI
INCLUDING TOOLSETTING
M3 STYLI
M2 STYLI
TP20
ACCESSORIES
TP2
TP200
All other probes using suitable adaptors
2-1 M2 THREAD STYLI
A-5000-7802
A-5000-7807
A-5000-7803
A-5000-4155
A-5000-4156
A-5000-4158
A-5000-3604
A-5000-7806
A-5000-4154
RUBY BALL STYLI (STAINLESS STEEL STEMS) 10mm RANGE
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
1.0 (0.04)
1.5 (0.06)
2.0 (0.08)
2.5 (0.10)
3.0 (0.12)
4.0 (0.16)
5.0 (0.19)
6.0 (0.23)
8.0 (0.31)
4.5 (0.18)
4.5 (0.18)
6.0 (0.24)
6.0 (0.24)
7.5 (0.30)
10.0 (0.39)
10.0 (0.39)
10.0 (0.39)
11.0 (0.42)
0.3
0.3
0.3
0.3
0.4
0.4
0.7
0.9
1.5
A-5000-7806
A-5000-7802
A-5000-7807
A-5000-7803
A-5000-3604
A-5000-4154
A-5000-4155
A-5000-4156
A-5000-4158
PS9R
PS24R
PS8R
PS26R
PS1R
PS12R
PS13R
PS14R
PS15R**
** Actual length = 11 mm
A-5000-4161
A-5000-4160
A-5000-7804
A-5000-3603
RUBY BALL STYLI (STAINLESS STEEL STEMS) 20mm RANGE
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
2.0 (0.08)
2.5 (0.10)
3.0 (0.12)
4.0 (0.16)
14.0 (0.55)
14.0 (0.55)
17.5 (0.69)
20.2 (0.79)
0.4
0.4
0.5
0.6
A-5000-3603
A-5000-7804
A-5000-4160
A-5000-4161
PS2R
PS27R
PS16R
PS17R
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
0.30 (0.012)
0.50 (0.020)
0.70 (0.030)
2.0 (0.80)
3.0 (0.12)
4.0 (0.16)
0.3
0.3
0.3
A-5000-7800
A-5000-7805†
A-5000-7801
PS29R
PS10R
PS31R
PS
NUMBER
A-5000-7801
A-5000-7805
A-5000-7800
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 10mm RANGE
A LOW PROBING FORCE MUST BE USED WITH THESE STYLI
A-5003-0046
A-5003-0034
A-5003-0033
A-5000-7808
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 20mm RANGE
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
1.0 (0.04)
1.0 (0.04)
1.5 (0.06)
5.0 (0.19)
7.0 (0.27)
12.5 (0.50)
12.5 (0.50)
15.0 (0.59)
0.6
0.41
0.46
1.98
A-5000-7808
A-5003-0033
A-5003-0034
A-5003-0046
PS23R
PS48R
PS49R
PS50R
*Effective Working Length
†Also suitable for scanning applications
2-2 M2 THREAD STYLI
A-5003-0047
A-5003-0043
A-5003-0040
A-5003-0038
A-5003-0036
A-5003-0035
A-5000-8663
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 30mm RANGE
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
1.0 (0.04)
1.5 (0.06)
2.0 (0.08)
2.5 (0.10)
3.0 (0.12)
4.0 (0.16)
5.0 (0.19)
20.5 (0.81)
25 (0.98)
25 (0.98)
25 (0.98)
25 (0.98)
25 (0.98)
25 (0.98)
0.40
0.58
0.99
1.48
1.49
1.57
2.57
A-5000-8663†
A-5003-0035†
A-5003-0036
A-5003-0038
A-5003-0040
A-5003-0043
A-5003-0047
PS51R**
PS52R
PS53R
PS54R
PS55R
PS56R
PS57R
** Actual length = 27 mm
A-5003-0048
A-5003-0044
A-5003-0041
A-5003-0039
A-5003-0037
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 40mm RANGE
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
2.0 (0.08)
2.5 (0.10)
3.0 (0.12)
4.0 (0.16)
5.0 (0.19)
35.0 (1.38)
35.0 (1.38)
35.0 (1.38)
35.0 (1.38)
35.0 (1.38)
1.29
1.95
1.97
2.04
3.17
A-5003-0037†
A-5003-0039
A-5003-0041
A-5003-0044
A-5003-0048
PS58R
PS59R
PS60R
PS61R
PS62R
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
3.0 (0.12)
4.0 (0.16)
5.0 (0.19)
42.5 (1.67)
42.5 (1.67)
50.0 (1.97)
2.44
2.52
3.75
A-5003-0042†
A-5003-0045
A-5003-0049
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
3.0 (0.12)
4.0 (0.16)
5.0 (0.19)
42.5 (1.67)
42.5 (1.67)
50.0 (1.97)
0.83
0.91
1.0
A-5003-0064
A-5003-0065
A-5003-0066
PS66R
PS67R
PS68R
A-5003-0049
A-5003-0045
A-5003-0042
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 50mm RANGE
PS63R
PS64R
PS65R
A-5003-0066
A-5003-0065
A-5003-0064
RUBY BALL STYLI (CERAMIC STEMS) 50mm RANGE
*Effective Working Length
† Also suitable for scanning applications
2-3 M2 THREAD STYLI
A-5003-2287
A-5003-2286
A-5003-2285
RUBY BALL STYLI (G F‡ STEMS) 50mm RANGE
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
4.0 (0.16)
5.0 (0.19)
6.0 (0.23)
50 (1.97)
50 (1.97)
50 (1.97)
1.0
1.1
1.2
A-5003-2285
A-5003-2286
A-5003-2287
‡GF - Graphite Fibre
STAR STYLI
A-5000-7811
A-5000-7629
A-5000-3626
WORKING
DIAMETER
mm (inch)
BALL
DIAMETER
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
10.0 (0.39)
20.0 (0.78)
30.0 (1.18)
1.0 (0.04)
2.0 (0.08)
2.0 (0.08)
0.5
1.3
1.8
A-5000-7811
A-5000-7629
A-5000-3626
PS28R
PS6R
PS7R
DISC
DIAMETER
mm (inch)
DISC
DEPTH
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
6.0 (0.24)
25.0 (0.98)
18.0 (0.70)
18.0 (0.70)
25.0 (0.98)
2.0 (0.08)
3.0 (0.12)
1.5 (0.06)
2.2 (0.09)
1.5 (0.06)
0.6
3.8
3.0
2.7
4.0
A-5000-3611
A-5000-4187
A-5000-7809
A-5000-3613
A-5000-7810
PS3R
PS22R
PS33R
PS4R
PS34R
CYLINDER
DIAMETER
mm (inch)
OVERALL
LENGTH
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
1.5 (0.06)
3.0 (0.12)
1.0 (0.04)
1.5 (0.06)
2.0 (0.08)
4.0 (0.16)
11.0 (0.43)
13.0 (0.50)
15.0 (0.59)
15.0 (0.59)
20.0 (0.78)
22.0 (0.86)
1.5 (0.06)
4.0 (0.16)
8.0 (0.31)
8.0 (0.31)
7.2 (0.28)
10.0 (0.39)
0.3
0.6
0.3
0.3
0.5
0.9
M-5000-4152
M-5000-4153
A-5000-8876
A-5000-8877
A-5000-7812
A-5003-0073
DISC STYLI
A-5000-3611
A-5000-4187
A-5000-7809
A-5000-7810
A-5000-3613
CYLINDER STYLI
M-5000-4152
(STEEL)
A-5000-8877
(RUBY)
M-5000-4153
(STEEL)
A-5000-7812
(RUBY)
A-5000-8876
(RUBY)
A-5003-0073
(RUBY)
PS18R
PS19R
PS44R
PS45R
PS35R
PS69R
*Effective Working Length
2-4 M2 THREAD STYLI
PARALLEL HEMISPHERICAL ENDED STYLI (TUNGSTEN CARBIDE)
A-5003-1208
A-5003-1210
A-5003-1228
A-5003-1218
A-5003-0074
A-5003-1219
CYLINDER
DIAMETER
mm (inch)
OVERALL
LENGTH
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
0.3 (0.02)
0.5 (0.02)
1.0 (0.04)
1.5 (0.06)
2.0 (0.08)
2.0 (0.08)
3.0 (0.12)
10.2 (0.40)
15.3 (0.60)
35.5 (1.39)
15.8 (0.62)
16.0 (0.63)
40.0 (1.57)
22.5 (0.89)
2.7 (0.11)
7.8 (0.31)
29.8 (1.17)
8.3 (0.32)
8.5 (0.33)
32.0 (1.26)
22.5 (0.89)
0.3
0.3
0.7
0.6
0.8
2.0
2.0
A-5003-1208†
A-5003-1210†
A-5003-1218†
A-5003-1219†
A-5003-1228†
A-5003-0074†
A-5003-1258†
PS70R
-
LENGTH
mm (inch)
WEIGHT
grammes
MATERIAL
PART
NUMBER
SE
NUMBER
5.0 (0.19)
10.0 (0.39)
20.0 (0.78)
30.0 (1.18)
40.0 (1.56)
40.0 (1.56)
50.0 (1.97)
70.0 (2.76)
90.0 (3.54)
30.0 (1.18)
40.0 (1.56)
50.0 (1.97)
0.2
0.4
0.9
1.4
1.8
0.9
1.0
1.3
1.5
0.97
1.22
1.51
SS
SS
SS
SS
SS
GF ‡
GF ‡
GF ‡
GF ‡
CERAMIC
CERAMIC
CERAMIC
M-5000-7634
M-5000-3647
M-5000-3648
M-5000-4162
M-5000-7779
A-5003-2280
A-5003-2281
A-5003-2282
A-5003-2283
A-5003-0070
A-5003-0071
A-5003-0072
A-5003-1258
STYLUS EXTENSIONS
STAINLESS STEEL (SS)
Length
GF
‡
Ø3.5 (0.14)
Ø3 (0.12)
Ø3.5 (0.14)
Length
Ø3 (0.12)
CERAMIC
SE7
SE4
SE5
SE6
SE18
SE26
SE27
SE28
Length
SPECIAL PURPOSE STYLI
M-5000-4150
A-5000-7813
A-5000-3614
30°Point
0.1 Radius
Ø18.0 Spherical
POINTER
(STEEL)
POINTER
(CARBIDE)
HOLLOW BALL
(CERAMIC)
LENGTH
mm (inch)
WEIGHT
grammes
MATERIAL
PART
NUMBER
PS
NUMBER
15.0 (0.59)
10.0 (0.39)
11.0 (0.43)
0.7
0.7
3.3
SS
CARBIDE
CERAMIC
M-5000-4150
A-5000-7813
A-5000-3614
PS20R
PS36R
PS21R
†Also suitable for scanning applications
‡GF - Graphite Fibre
3-0 M3 STYLI
M2 STYLI
M3 STYLI
INCLUDING TOOLSETTING
M4 STYLI
M5 STYLI
TP6
Other probes using suitable adaptors
ACCESSORIES
TP1
MIP
USING AND
CHOOSING STYLI
Suitable for the following probes:
3-1 M3 THREAD STYLI
The use of M3 thread styli is not recommended on M2 threaded probes since
unwanted triggers may occur.
A-5000-7630
A-5000-7606
A-5000-3553
A-5000-3552
A-5000-3551
RUBY BALL STYLI (STAINLESS STEEL STEMS) 21mm RANGE
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
1.0 (0.04)
2.0 (0.08)
3.0 (0.12)
4.0 (0.16)
5.0 (0.19)
4.0 (0.16)
8.0 (0.31)
12.0 (0.48)
17.0 (0.67)
21.0 (0.80)
1.0
1.0
1.0
1.3
1.5
A-5000-3551
A-5000-3552
A-5000-3553
A-5000-7606
A-5000-7630
PS1-9R
PS1-10R
PS1-11R
PS1-12R
PS1-13R
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
4.0 (0.16)
5.0 (0.19)
27.0 (1.06)
31.0 (1.22)
2.5
3.0
A-5000-3554
A-5000-7648
PS1-1R
PS1-14R
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
0.5 (0.02)
1.5 (0.06)
2.5 (0.10)
2.0 (0.08)
12.5 (0.49)
12.5 (0.49)
1.0
0.8
1.3
A-5000-7632
A-5003-0050
A-5003-0054
PS1-8R
PS1-17R
PS1-18R
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
1.5 (0.06)
2.0 (0.08)
2.5 (0.10)
3.0 (0.12)
22.5 (0.88)
22.5 (0.88)
22.5 (0.88)
22.5 (0.88)
0.93
1.32
1.81
1.83
A-5003-0051
A-5003-0052
A-5003-0055
A-5003-0057
PS1-19R
PS1-20R
PS1-21R
PS1-22R
A-5000-7648
A-5000-3554
RUBY BALL STYLI (STAINLESS STEEL STEMS) 31mm RANGE
A-5003-0054
A-5003-0050
A-5000-7632
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 21mm RANGE
A-5003-0057
A-5003-0055
A-5003-0052
A-5003-0051
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 30mm RANGE
*Effective Working Length
3-2 M3 THREAD STYLI
A-5003-0062
A-5003-0060
A-5003-0058
A-5003-0056
A-5003-0053
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 40mm RANGE
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
2.0 (0.08)
2.5 (0.10)
3.0 (0.12)
4.0 (0.16)
5.0 (0.19)
32.5 (1.28)
32.5 (1.28)
32.5 (1.28)
32.5 (1.28)
32.5 (1.28)
1.58
2.28
2.30
2.38
3.50
A-5003-0053
A-5003-0056
A-5003-0058
A-5003-0060
A-5003-0062
PS1-23R
PS1-24R
PS1-25R
PS1-26R
PS1-27R
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
3.0 (0.12)
4.0 (0.16)
5.0 (0.19)
42.5 (1.67)
42.5 (1.67)
50.0 (1.97)
2.78
2.85
4.10
A-5003-0059
A-5003-0061
A-5003-0063
PS1-28R
PS1-29R
PS1-30R
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
3.0 (0.12)
4.0 (0.16)
5.0 (0.19)
42.5 (1.67)
42.5 (1.67)
50.0 (1.97)
1.17
1.24
1.33
A-5003-0067
A-5003-0068
A-5003-0069
PS1-31R
PS1-32R
PS1-33R
A-5003-0063
A-5003-0061
A-5003-0059
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 50mm RANGE
A-5003-0069
A-5003-0068
A-5003-0067
RUBY BALL STYLI (CERAMIC STEMS) 50mm RANGE
*Effective Working Length
3-3 M3 THREAD STYLI
STAR STYLI
A-5003-0076
A-5003-0077
WORKING
DIAMETER
mm (inch)
BALL
DIAMETER
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
30 (1.18)
50 (1.96)
2.0 (0.08)
2.0 (0.08)
3.0
5.25
A-5003-0076
A-5003-0077
PS1-34R
PS1-35R
DISC
DIAMETER
mm (inch)
DISC
DEPTH
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
12.7 (0.5)
35.0 (1.37)
63.5 (2.5)
30.0 (1.18)
2.0 (0.08)
5.0 (0.19)
6.0 (0.23)
17.0 (0.77)
4.0
10.0
45.0
18.0
A-5000-3615
A-5000-7612
A-5000-7669
A-5000-7814
PS1-3R
PS1-5R
PS1-15R
PS1-16R
DISC AND CERAMIC HOLLOW BALL STYLI
A-5000-3615
A-5000-7814
A-5000-7612
A-5000-7669
STYLUS EXTENSIONS
STAINLESS STEEL (SS)
Length
CERAMIC
Length
LENGTH
mm (inch)
WEIGHT
grammes
MATERIAL
PART
NUMBER
SE
NUMBER
10.0 (0.39)
20.0 (0.78)
35.0 (1.37)
50.0 (1.96)
0.9
1.6
2.9
2.95
SS
SS
SS
CERAMIC
M-5000-7633
M-5000-3592
M-5000-3593
A-5003-0075
SE8
SE2
SE3
SE29
4-0 M4 STYLI
M2 STYLI
M3 STYLI
INCLUDING TOOLSETTING
CYCLONE
TS27R
””’’”””’’’”
M4 STYLI
MP10
MP11
MP12
MP700
LP2
M5 ST
MP4
MP6
MP7
MP8
MP9
ACCESSORIES
TP7
SP600
TP800
MP1
MP3
USING AND
CHOOSING STYLI
Suitable for the following probes:
4-1 M4 THREAD STYLI
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
1.0 (0.04)
2.0 (0.08)
3.0 (0.12)
4.0 (0.16)
5.0 (0.20)
5.0 (0.20)
5.0 (0.20)
6.0 (0.24)
8.0 (0.32)
19.5 (0.77)
19.0 (0.75)
18.5 (0.73)
18.0 (0.71)
17.5 (0.69)
20.0 (0.79)
30.0 (1.18)
17.0 (0.67)
16.0 (0.63)
4.0 (0.16)
8.0 (0.31)
13.0 (0.51)
13.0 (0.51)
13.5 (0.53)
16.0 (0.63)
26.0 (1.02)
13.5 (0.53)
16.0 (0.63)
2.5
2.3
2.0
2.1
2.3
2.4
3.0
3.0
3.9
A-5000-7545
A-5000-7547
A-5000-7549
A-5000-7551
A-5000-7553
A-5000-6731
A-5000-6352
A-5000-7555
A-5000-7557
PS2-3R
PS2-4R
PS2-5R
PS2-6R
PS2-7R
PS2-22R
PS2-23R
PS2-8R
PS2-9R
A-5000-7557
LENGTH
mm (inch)
A-5000-7555
A-5000-7549
A-5000-6731
BALL
DIAMETER
mm (inch)
A-5000-6352
A-5000-7547
A-5000-7553
A-5000-7551
A-5000-7545
RUBY BALL STYLI (STAINLESS STEEL STEMS) 16-30mm RANGE
RUBY BALL STYLI 50mm RANGE
(STEEL STEM)
A-5000-7521
(CERAMIC STEM)
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
5.0 (0.20)
6.0 (0.24)
6.0 (0.24)
8.0 (0.32)
33.0 (1.29)
33.4 (1.31)
38.25 (1.50)
37.2 (1.46)
5.8
4.7
5.1
5.1
A-5000-7521
A-5000-3709
A-5003-1436
A-5000-7795
PS3-1R
PS3-1C
PS3-6C
A-5000-3709**
(G F‡ STEM)
(CERAMIC STEM)
A-5003-1436
A-5000-7795
‡GF - Graphite Fibre
7.5
(0.29)
M-5000-6460
STAR CENTRE
Weight 10g
15.0 (0.59)
M4 STAR STYLI
15.0 (0.59)
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
6.0 (0.24)
6.0 (0.24)
34.0 (1.34)
83.0 (3.27)
6.0
7.5
A-5000-7098
A-5000-6462
PS3-4C
PS3-5C
*Effective Working Length
(CERAMIC STEM)
A-5000-7098
(CERAMIC STEM)
A-5000-6462
**These styli lengths are measured from shoulder to ball end
4-2 M4 THREAD STYLI
RUBY BALL STYLI 100-150-200mm RANGE
BALL
DIAMETER
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
PS
NUMBER
5.0 (0.2)
6.0 (0.23)
6.0 (0.23)
8.0 (0.31)
6.0 (0.23)
6.0 (0.23)
83 (3.27)
83.4 (3.28)
88.25 (3.47)
87.2 (3.43)
138.25 (5.44)
188.25(7.41)
11.3
6.7
6.2
6.6
7.5
8.7
A-5000-7522
A-5000-3712
A-5003-1358
A-5000-7796
A-5003-1255
A-5003-1075
PS3-2R
PS3-2C†
PS3-7C
(STEEL STEM)
A-5000-7522
(CERAMIC STEM)
A-5000-3712**
(G F‡ STEM)
A-5003-1358
(CERAMIC STEM)
A-5000-7796
(G F‡ STEM)
A-5003-1255
A-5003-1075
(150mm Length)
(200mm Length)
**These styli lengths are measured from shoulder to ball end
‡GF - Graphite Fibre
DISC STYLI
DIA A
mm (inch)
DIA B
mm (inch)
C
mm (inch)
D
mm (inch)
PART
NUMBER
PS
NUMBER
Ø30 (1.18)
Ø35 (1.38)
Ø50 (1.97)
Ø21 (0.82)
Ø21 (0.82)
Ø23 (0.90)
2.2 (0.09)
2.2 (0.09)
3.0 (0.12)
3.0 (0.12)
3.0 (0.12)
4.0 (0.15)
A-5000-7596
A-5000-7597
A-5000-7598
PS2-12R
PS2-13R
PS2-14R
*Effective Working Length
†Also suitable for scanning applications
4-3 TOOL DATUMING STYLI
6 (0.23)
6 (0.23)
Ø4.5
OVERALL LENGTH
6 (0.23)
A-5000-3212
FOR USE
WITH
OVERALL
LENGTH
mm (inch)
WEIGHT
grammes
PART
NUMBER
TYPE
MP4 PROBE
MP4 PROBE
MP6-3 PROBE
LP2 PROBE
53 (2.08)
43 (1.69)
96.5 (3.8)
32.5 (1.28)
4.5
4.3
21.9
11.0
A-5000-3212
A-5000-6701
A-5000-6713
A-5000-6403
PS1-13
PS1-14
PS2-40
PS2-41
6 (0.23)
6 (0.23)
Ø4.5
OVERALL LENGTH
6 (0.23)
5 (0.20)
9.5 (0.37)
A-5000-6701
OVERALL LENGTH
9.5 (0.37)
3 (0.12)
9.5 (0.37)
A-5000-6713
OVERALL LENGTH
9.5 (0.37)
A-5000-6403
TS27R STYLI - PARALLEL SHAFTED (not M4) - Not compatible with TS27 probes
Ø12.7 (0.50)
8.0 (0.32)
(TUNGSTEN CARBIDE)
LENGTH
mm (inch)
WEIGHT
grammes
PART
NUMBER
23 (0.92)
29.0 (1.14)
12.1
7.1
A-2008-0382
A-2008-0384
A-2008-0382
19.5A/F (0.75)
8.0 (0.32)
(CERAMIC)
A-2008-0384
19.5A/F (0.75)
Stylus conversion kit for TS27R to allow Horizontal M/C applications (A-2008-0448)
Stylus holder assembly
A-2008-0389
Stylus holder
M-2008-0447*
Vertical M/C applications
Horizontal M/C applications
*Order also requires 3 x P-SC13-0403
4-4 M4 THREAD STYLI
M4 STYLUS EXTENSIONS
STAINLESS STEEL (SS)
Length
CERAMIC
LENGTH
mm (inch)
WEIGHT
grammes
MATERIAL
PART
NUMBER
SE NUMBER
10 (0.39)
15 (0.59)
20 (0.79)
30 (1.18)
30 (1.18)
50 (1.97)
100 (3.94)
2.4
3.7
4.8
7.4
5.1
6.7
10.6
SS
SS
SS
SS
CERAMIC
CERAMIC
CERAMIC
M-5000-7583
M-5000-7584
M-5000-7585
M-5000-7586
A-5000-7754
A-5000-7755
A-5000-7727
SE-9
SE-10
SE-11
SE-12
SE-19
SE-20†
SE-30†
†Also suitable for scanning applications
Length
CRASH PROTECTION DEVICES
LENGTH
mm (inch)
WEIGHT
grammes
MATERIAL
PART
NUMBER
8.0 (0.31)
8.0 (0.31)
10.0 (0.39)
15.2 (0.60)
1.8
1.4
1.5
1.5
SS
SS
SS
SILVER STEEL
M-5000-7582
M-5000-7587
M-5000-7588
M-2008-0379
S NUMBER
M-5000-7582
FOR CRANK STYLI
SA-8
SS2
SS3
M-5000-7587
In the event of a collision these adaptors are designed to break and protect
the probe from damage.
FOR SWIVEL ADAPTOR
M-5000-7588
FOR TS27R
M-2008-0379
STYLI CRANK
Stylus
Screw
M-5000-7588
Stylus Crank
LENGTH A
mm (inch)
PART
NUMBER
CR NUMBER
21.9 (0.86)
27.6 (1.08)
M-5000-7589
M-5000-7590
CR-1
CR-2
4-5 M4 THREAD STYLI
SWIVEL ADAPTOR
Stylus
Swivel
Adaptor
M4
LENGTH
A
B
mm
mm
(inch) (inch)
Screw M-5000-7588
10.0
(0.39)
13.5
(0.53)
Swivel Adaptor
B
Screw M-5000-7588
A
PART
NUMBER
12.5 M-5000-7591
(0.50)
16.0 M-5000-7592
(0.63)
SW NUMBER
SW-1
SW-2
Stylus
5 (0.20)
M4 SCANNING STYLI
For use with Cyclone probe (also SP2/SP2-1 probes with a suitable adaptor).
HEMISPHERICAL HARD ANODISED ALUMINIUM BALL STYLI (METRIC)
A-5000-7718 A-5000-7719
A-5000-7723
A-5000-7720
A-5000-7721
A-5000-7724
A-5000-7722
A-5000-7725
BALL
DIAMETER
mm (inch)
LENGTH
mm (inch)
WEIGHT
grammes
PART
NUMBER
8.0 (0.31)
10.0 (0.39)
12.0 (0.47)
16.0 (0.63)
20.0 (0.78)
25.0 (0.98)
32.0 (1.26)
38.0 (1.47)
14.5 (0.57)
15.5 (0.61)
16.5 (0.65)
19.5 (0.77)
21.5 (0.85)
25.0 (0.98)
25.5 (1.00)
28.5 (1.12)
3.4
3.9
4.6
7.2
10.9
18.7
19.6
28.5
A-5000-7718
A-5000-7719
A-5000-7720
A-5000-7721
A-5000-7722
A-5000-7723
A-5000-7724
A-5000-7725
Complete styli kit available -Part Number A-5000-7676
HEMISPHERICAL HARD ANODISED ALUMINIUM BALL STYLI (IMPERIAL)
A-5000-7710
A-5000-7714
A-5000-7711
A-5000-7712
A-5000-7715
A-5000-7713
BALL
DIAMETER
inch (mm)
LENGTH
mm (inch)
WEIGHT
grammes
PART
NUMBER
5/16 (7.93)
3/8 (9.53)
1/2 (12.7)
5/8 (15.9)
3/4 (19.05)
1 (25.4)
14.5 (0.57)
15.3 (0.60)
16.9 (0.66)
19.4 (0.76)
21.1 (0.83)
24.2 (0.95)
3.3
3.7
4.9
7.0
9.9
19.6
A-5000-7710
A-5000-7711
A-5000-7712
A-5000-7713
A-5000-7714
A-5000-7715
Complete styli kit available - Part Number A-5000-7677
M2 STYLI
M3 STYLI
INCLUDING TOOLSETTING
M4 STYLI
M5 STYLI
*Manufactured by Renishaw approved suppliers.
ACCESSORIES
Suitable for the following probes:
SP2
SP2-1
Other Manufacturers Probing Systems
USING AND
CHOOSING STYLI
5-0 M5 STYLI*
5-1 M5 THREAD STYLI
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 20-49mm
Overall length
BALL
DIAMETER
mm (inch)
OVERALL
LENGTH
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
3.0 (0.12)
3.0 (0.12)
3.0 (0.12)
4.0 (0.16)
5.0 (0.19)
23.5 (0.9)
32 (1.26)
48.5 (1.9)
31.5 (1.24)
47.5 (1.87)
15 (0.6)
23.5 (0.9)
40 (1.57)
23.5 (0.9)
40 (1.57)
6.7
7.1
7.8
7.1
11.6
A-5003-0787
A-5003-0788
A-5003-0789
A-5003-0791
A-5003-0794
BALL
DIAMETER
mm (inch)
OVERALL
LENGTH
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
3.0 (0.12)
4.0 (0.16)
5.0 (0.19)
6.0 (0.23)
7.0 (0.27)
8.0 (0.31)
9.0 (0.35)
10.0 (0.39)
56.5 (2.26)
62.0 (2.44)
72.5 (2.85)
51.0 (2.01)
51.5 (2.03)
59.5 (2.34)
60.0 (2.36)
60.5 (2.38)
48 (1.89)
54 (2.13)
65 (2.56)
44 (1.73)
45 (1.77)
50.5 (1.99)
50.5 (1.99)
52.5 (2.07)
8.2
8.5
15.1
12.2
12.8
29.5
28.7
30.2
A-5003-0790
A-5003-0792
A-5003-0795
A-5003-0797
A-5003-0798
A-5003-0799
A-5003-0802
A-5003-0803
OVERALL
LENGTH
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
44.6
50.7
52.3
A-5003-0800
A-5003-0801
A-5003-0804
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 50-79mm
Overall length
RUBY BALL STYLI (TUNGSTEN CARBIDE STEMS) 80-119mm
BALL
DIAMETER
mm (inch)
Overall length
8.0 (0.31)
8.0 (0.31)
10.0 (0.39)
90 (3.54)
96 (3.78)
110.5 (4.35) 101.5 (3.99)
113 (4.45) 105 (4.13)
RUBY BALL STYLI (CERAMIC STEMS) 11mm STEM DIAMETER
11mm
Overall length
BALL
DIAMETER
mm (inch)
OVERALL
LENGTH
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
5.0 (0.19)
6.0 (0.23)
7.0 (0.27)
8.0 (0.31)
9.0 (0.35)
10.0 (0.39)
50.5 (1.99)
51.0 (2.0)
51.5 (2.03)
59.5 (2.34)
60.0 (2.36)
60.5 (2.38)
43 (1.69)
44 (1.73)
45 (1.77)
50.5 (1.99)
51.5 (2.03)
52.5 (2.07)
7.3
7.7
7.8
13.2
13.8
14.1
A-5003-0816
A-5003-0819
A-5003-0820
A-5003-0821
A-5003-0822
A-5003-0823
*Effective Working Length
5-2 M5 THREAD STYLI
19mm
RUBY BALL STYLI (CERAMIC STEMS) 19mm STEM DIAMETER
Overall length
BALL
DIAMETER
mm (inch)
OVERALL
LENGTH
mm (inch)
EWL*
mm (inch)
WEIGHT
grammes
PART
NUMBER
8.0 (0.31)
8.0 (0.31)
9.0 (0.35)
10.0 (0.39)
59.5 (2.34)
110.5 (4.35)
60.0 (2.36)
60.5 (2.38)
41.5 (1.63)
92.5 (3.64)
42.5 (1.67)
43.5 (1.71)
33.4
38.3
33.9
34.4
A-5003-0824
A-5003-0825
A-5003-0826
A-5003-0827
RUBY BALL STYLI (TUNGSTEN CARBIDE NON-THREADED STEMS) †
Stem
length
Stem
diameter
Overall length
Stem diameter
Overall length
† THIS RANGE OF STYLI ARE NOT SUITABLE FOR USE WITH SP2
AND SP2-1 SCANNING PROBES
BALL
DIAMETER
mm (inch)
OVERALL
LENGTH
mm (inch)
STEM
STEM
LENGTH DIAMETER
mm (inch) mm (inch)
0.3 (0.01)
0.5 (0.02)
0.6 (0.02)
0.8 (0.03)
1.0 (0.04)
15.0 (0.59)
15.0 (0.59)
15.0 (0.59)
15.0 (0.59)
15.0 (0.59)
2.0 (0.08)
2.0 (0.08)
4.0 (0.16)
4.0 (0.16)
4.0 (0.16)
BALL
DIAMETER
mm (inch)
OVERALL
LENGTH
mm (inch)
STEM
STEM
LENGTH DIAMETER
mm (inch) mm (inch)
1.5 (0.06)
2.0 (0.08)
2.5 (0.10)
3.0 (0.12)
4.0 (0.16)
5.0 (0.20)
25.75 (1.01)
26.0 (1.02)
26.25 (1.03)
26.5 (1.04)
27.0 (1.06)
27.5 (1.08)
1.0 (0.04)
1.0 (0.04)
1.0 (0.04)
1.0 (0.04)
1.0 (0.04)
PART
NUMBER
A-5003-0805
A-5003-0806
A-5003-0807
A-5003-0808
A-5003-0809
PART
NUMBER
25.0 (0.98)
25.0 (0.98)
25.0 (0.98)
25.0 (0.98)
25.0 (0.98)
25.0 (0.98)
1.0 (0.04)
1.5 (0.06)
1.5 (0.06)
2.0 (0.08)
2.0 (0.08)
2.0 (0.08)
A-5003-0810
A-5003-0811
A-5003-0812
A-5003-0813
A-5003-0814
A-5003-0815
LENGTH
mm (inch)
HOLDER
SIZE
mm (inch)
PART
NUMBER
20.0 (0.80)
20.0 (0.80)
20.0 (0.80)
1.0 (0.04)
1.5 (0.06)
2.0 (0.08)
A-5003-0859
A-5003-0860
A-5003-0861
THE ABOVE STYLI MUST BE USED WITH THE CORRECT PIN HOLDER
PIN HOLDER
Length
DISC STYLI
Disc
depth
Disc
diameter
DISC
DIAMETER
mm (inch)
DISC
DEPTH
mm (inch)
OVERALL
LENGTH
mm (inch)
WEIGHT
grammes
PART
NUMBER
8.0 (0.31)
10.0 (0.39)
16.0 (0.63)**
1.0 (0.04)
0.7 (0.03)
2.5 (0.10)
56.0 (2.20)
46.0 (1.81)
57.5 (2.26)
11.1
11.5
16.6
A-5003-1091
A-5003-1090
A-5003-1092
Length
*Effective Working Length
** Ceramic Disc
5-3 M5 THREAD STYLI
STAR STYLI
Working
Diameter
WORKING
DIAMETER
mm (inch)
BALL
DIAMETER
mm (inch)
OVERALL
LENGTH
mm (inch)
WEIGHT
grammes
74.0 (2.92)
36.0 (1.42)
4.0 (0.16)
1.0 (0.04)
102.0 (4.02)
73.0 (2.87)
61.4
43.9
PART
NUMBER
A-5003-1093
A-5003-1094
Overall length
STAR EXTENSION
DIAMETER
mm (inch)
Diameter
Internal length
OVERALL
LENGTH
mm (inch)
20.0 (0.79) 120.0 (4.72)
INTERNAL
LENGTH
mm (inch)
PART
NUMBER
100.0 (3.94)
A-5003-1095
Overall length
M5 STYLUS EXTENSIONS
Stem
Diameter
Length
LENGTH
mm (inch)
MATERIAL
STEM
DIAMETER
mm (inch)
WEIGHT
grammes
PART
NUMBER
10.0 (0.39)
20.0 (0.79)
40.0 (1.57)
40.0 (1.57)
40.0 (1.57)
60.0 (2.36)
60.0 (2.36)
60.0 (2.36)
80.0 (3.15)
80.0 (3.15)
80.0 (3.15)
100.0 (3.94)
100.0 (3.94)
100.0 (3.94)
120.0 (4.72)
150.0 (5.90)
200.0 (7.87)
STEEL
STEEL
STEEL
AL SOLID
AL TUBE
STEEL
AL SOLID
AL TUBE
STEEL
AL SOLID
AL TUBE
STEEL
AL SOLID
AL TUBE
AL SOLID
AL TUBE
AL TUBE
11.0 (0.43)
11.0 (0.43)
11.0 (0.43)
11.0 (0.43)
20.0 (0.79)
11.0 (0.43)
11.0 (0.43)
20.0 (0.79)
11.0 (0.43)
11.0 (0.43)
20.0 (0.79)
11.0 (0.43)
11.0 (0.43)
20.0 (0.79)
11.0 (0.43)
20.0 (0.79)
20.0 (0.79)
6.4
13.2
28.0
10.1
32.1
42.5
15.2
36.7
57.8
19.7
43.2
72.9
24.4
50.3
29.6
68.5
84.0
A-5003-0839
A-5003-0840
A-5003-0841
A-5003-0834
A-5003-0828
A-5003-0842
A-5003-0835
A-5003-0829
A-5003-0843
A-5003-0836
A-5003-0830
A-5003-0844
A-5003-0837
A-5003-0831
A-5003-0838
A-5003-0832
A-5003-0833
Note: AL is Aluminium
5-4 M5 SCANNING STYLI
Only suitable for SP2 and SP2-1 probes
ROUND ENDED STYLI (STAINLESS STEEL WITH TUNGSTEN CARBIDE TIPS)
A-5002-0051
A-5002-0053
Length
Flank length
DIAMETER
mm (inch)
LENGTH
mm (inch)
FLANK
LENGTH
mm (inch)
WEIGHT
grammes
PART
NUMBER
2.0 (0.08)
3.0 (0.12)
4.0 (0.16)
5.0 (0.20)
6.0 (0.24)
8.0 (0.31)
10.0 (0.39)
12.0 (0.47)
55.0 (2.17)
65.0 (2.56)
70.0 (2.76)
75.0 (2.95)
80.0 (3.15)
80.0 (3.15)
85.0 (3.35)
85.0 (3.35)
15.0 (0.59)
25.0 (0.98)
30.0 (1.18)
35.0 (1.38)
40.0 (1.57)
40.0 (1.57)
45.0 (1.77)
45.0 (1.77)
14.4
16.2
18.9
20.8
24.1
32.2
39.9
48.9
A-5002-0051
A-5002-0052
A-5002-0053
A-5002-0054
A-5002-0055
A-5002-0056
A-5002-0057
A-5002-0058
DIAMETER
mm (inch)
LENGTH
mm (inch)
FLANK
LENGTH
mm (inch)
WEIGHT
grammes
PART
NUMBER
2.0 (0.08)
3.0 (0.12)
4.0 (0.16)
5.0 (0.20)
6.0 (0.24)
8.0 (0.31)
10.0 (0.39)
12.0 (0.47)
55.0 (2.17)
65.0 (2.56)
70.0 (2.76)
75.0 (2.95)
80.0 (3.15)
80.0 (3.15)
85.0 (3.35)
85.0 (3.35)
15.0 (0.59)
25.0 (0.98)
30.0 (1.18)
35.0 (1.38)
40.0 (1.57)
40.0(1.57)
45.0(1.77)
45.0(1.77)
14.3
16.4
19.0
21.5
26.4
36.0
47.7
59.8
M-5002-0020
M-5002-0021
M-5002-0022
M-5002-0023
M-5002-0024
M-5002-0025
M-5002-0026
M-5002-0027
BALL
DIAMETER
mm (inch)
LENGTH
mm (inch)
WEIGHT
grammes
PART
NUMBER
5.0 (0.20)
6.0 (0.24)
8.0 (0.31)
10.0 (0.39)
12.0 (0.47)
97.5 (3.84)
97.0 (3.82)
96.0 (3.78)
95.0 (3.74)
94.0 (3.70)
28.5
29.9
32.9
33.1
37.3
A-5000-9410
A-5000-9412
A-5000-9416
A-5000-9420
A-5000-9424
A-5002-0056
FLAT ENDED STYLI (STAINLESS STEEL)
M-5002-0020
M-5002-0023
M-5002-0027
CERAMIC BALL STYLI (STAINLESS STEEL STEMS)
A-5000-9410
A-5000-9424
5-5 M5 SCANNING STYLI
STYLI EXTENSIONS
A-5002-0081
LENGTH
mm (inch)
WEIGHT
grammes
PART
NUMBER
70.0 (2.76)
100.0 (3.94)
26.7
33.7
A-5002-0081
A-5002-0082
These Styli Extensions have been
designed to be used exclusively with
the Styli Tips. They should not be used
with any other types of styli.
A-5002-0082
HEMISPHERICAL STYLI TIP (HARDENED STEEL)
A-5002-0061
A-5002-0062
A-5002-0063
A-5002-0064
A-5002-0066
A-5002-0065
A-5002-0068
A-5002-0067
DIAMETER
mm (inch)
WEIGHT
grammes
PART
NUMBER
16.0 (0.63)
19.0 (0.75)
20.0 (0.79)
25.0 (0.98)
30.0 (1.18)
32.0 (1.26)
35.0 (1.38)
38.0 (1.50)
40.0 (1.57)
12.3
17.1
17.9
21.5
26.4
29.4
38.3
44.2
48.5
A-5002-0061
A-5002-0062
A-5002-0063
A-5002-0064
A-5002-0065
A-5002-0066
A-5002-0067
A-5002-0068
A-5002-0069
DIAMETER
mm (inch)
WEIGHT
grammes
PART
NUMBER
16.0 (0.63)
20.0 (0.79)
25.0 (0.98)
30.0 (1.18)
17.0
27.0
35.0
53.9
A-5002-0071
A-5002-0073
A-5002-0074
A-5002-0075
A-5002-0069
FLAT ENDED STYLI TIP (HARDENED STEEL)
A-5002-0071
A-5002-0073
A-5002-0074
A-5002-0075
6-0 ACCESSORIES
Styli Knuckles
Gram Gauge
Adaptors
Styli Kits
Styli Centres
Custom Design Styli
Datum Ball
M2 STYLI
Contains-
USING AND
CHOOSING STYLI
For use with all suitable probes:
M4 STYLI
Styli Centres
M5 STYLI
Datum Ball
ACCESSORIES
Gram Gauge
Custom Design Styli
Styli Kits
INCLUDING TOOLSETTING
Adaptors
M3 STYLI
Styli Knuckles
6-1 ACCESSORIES
STYLI KNUCKLES
THREAD
SIZE
EFFECTIVE
LENGTH
mm (inch)
CENTRE
OFFSET
mm (inch)
WEIGHT
grammes
PART
NUMBER
SK
NUMBER
M2
M3
M5
M5
8.0 (0.3)
12.0 (0.48)
36.0 (1.42)
30.0 (1.18)
4.5 (0.18)
6.0 (0.24)
0.0 (0.00)
0.0 (0.00)
1.6
3.7
36.8
11.1
A-5000-7534
A-5000-7616
A-5003-0852
A-5003-0853
SK2
SK3
-
STYLI CENTRES
A-5000-8395
STYLUS CENTRE
A-5000-3627
5 WAY STYLUS CENTRE
THREAD
SIZE
EFFECTIVE
LENGTH
mm (inch)
CENTRE
SIZE
mm (inch)
WEIGHT
grammes
PART
NUMBER
SC
NUMBER
M2
M2
M3
M4
M5
M5
7.5 (0.3)
8.0 (0.31)
13.0 (0.51)
18.0 (0.7)
15.0 (0.59)
20.0 (0.8)
7.5 (0.3)
7.0 (0.27)
10.0 (0.39)
15.0 (0.59)
15.0 (0.59)
20.0 (0.8)
1.1
0.8
2.4
12.1
12.5
31.6
A-5000-8395
A-5000-3627
A-5000-7610
A-5000-7792
A-5003-0854
A-5003-0855
SC6
SC2
SC4
SC5
-
CENTRE
SIZE
A-5000-7610
5 WAY STYLUS CENTRE
A-5000-7792
5 WAY STYLUS CENTRE
EFFECTIVE
LENGTH
A-5003-0854
5 WAY STYLUS CENTRE
A-5003-0855
5 WAY STYLUS CENTRE
6-2 ACCESSORIES
ADAPTORS
MALE/FEMALE LENGTH
THREAD
mm (inch)
M2/M3
M-5000-4164
M4/M3
M3/M2
M4/M2
M-5000-4163
M-5000-6622
M4/M3
M5/M4
M-5000-9301
M-5000-6714
M-5000-6625
M5/M4
M5/M3
M5/M2
M2/M3
M3/M2
M4/M2
M4/M3
M4/M3
M5/M4
M5/M4
M5/M3
M5/M2
M4/M3
TF6/M3
M4/M3
M4/M3
M4/Ø4.5
8mm/M5
10mm/M5
7.0 (0.27)
5.0 (0.19)
5.0 (0.19)
9.0 (0.35)
20.0 (0.78)
6.5 (0.27)
9.0 (0.35)
10.0 (0.39)
10.0 (0.39)
50.0 (1.97)
18.0 (0.70)
75.0 (2.95)
100.0 (3.94)
10.0
22.0 (0.87)
22.0 (0.87)
WEIGHT
grammes
MATERIAL
PART
NUMBER
SA
NUMBER
0.4
0.6
1.5
1.4
3.2
6.0
4.6
5.0
5.0
4.4
1.9
5.2
6.3
5.0
18.0
20.0
SS
SS
SS
SS
SS
SS
SS
SS
SS
CERAMIC
SS
CERAMIC
CERAMIC
SS
SS
SS
M-5000-4164
M-5000-4163
M-5000-6622†
M-5000-6714
M-5000-6625
M-5000-9301†
A-5003-0856
A-5003-0857
A-5003-0858
A-5000-7751
M-5000-8167
A-5000-7752
A-5000-7753
A-2054-4657
A-5000-9302
A-5000-9303
SA2
SA3
SA5
SA6
SE21
SE22
SATF6
SE23
SE24
SA1
M4/Ø4.5
A-5003-0856
A-5003-0857
A-5003-0858
TF6/M3
M4/M3
A-2054-4657
A-5000-7751
M-5000-8167
8mm/M5
10mm/M5
A-5000-9302
A-5000-9303
M4/M3
A-5000-7752
M4/M3
A-5000-7753
STYLI TOOLS
FOR M2 AND M3
THREADED STYLI
M-5000-3540
FOR THE M2 GF
RANGE OF STYLI
FOR M4 AND M5
THREADED STYLI
A-5003-2300
THESE TOOLS ARE DESIGNED TO FIT STYLI TO RENISHAW PROBES WITHOUT CAUSING INTERNAL DAMAGE.
M-5000-3707
†Also suitable for Scanning applications
6-3 ACCESSORIES
M2 COMPREHENSIVE STYLI KIT
A-5000-0001
M2 ENHANCEMENT STYLI KIT
STYLI
TYPE
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
CYLINDER
CYLINDER
BALL
POINTER
CERAMIC BALL
BALL
BALL
BALL
BALL
STAR
BALL
DISC
BALL
DISC
DISC
CYLINDER
POINTER
STAR
BALL
BALL
STAR
M2/M3 ADAPTOR
5 WAY CENTRE
EXTENSION
EXTENSION
EXTENSION
EXTENSION
EXTENSION
KNUCKLE
TOOL KIT
STYLI
TYPE
BALL
BALL
BALL
BALL
DISC
DISC
BALL
BALL
BALL
BALL
BALL
STAR
CYLINDER
POINTER
EXTENSION
TOOL
TOOL
A-5000-0002
LENGTH
mm (inch)
DIAMETER
QUANTITY
mm (inch)
10.0 (0.4)
3.0 (0.12)
10.0 (0.4)
0.5 (0.02)
10.0 (0.4)
4.0 (0.16)
10.0 (0.4)
5.0 (0.2)
10.0 (0.4)
6.0 (0.24)
11.0 (0.44) 8.0 (0.32)
20.0 (0.8)
3.0 (0.12)
20.0 (0.8)
4.0 (0.16)
11.0 (0.44) 1.5 (0.06)
13.0 (0.52) 3.0 (0.12)
20.0 (0.8)
2.0 (0.08)
15.0 (0.6)
30 DEG
11.0 (0.44) 18.0 (0.72)
20.0 (0.8)
1.0 (0.04)
10.0 (0.4)
1.5 (0.06)
10.0 (0.4)
2.5 (0.1)
20.0 (0.8)
2.5 (0.1)
10.0 (0.4)
1.0 (0.04)
10.0 (0.4) 0.3 (0.012)
10.0 (0.4)
6.0 (0.24)
10.0 (0.4)
0.7 (0.03)
7.5 (0.3)
18.0 (0.72)
7.5 (0.3)
25.0 (1.0)
20.0 (0.8)
2.0 (0.08)
10.0 (0.4) 0.1 RADIUS
30.0 (1.2)
2.0 (0.08)
10.0 (0.4)
2.0 (0.08)
10.0 (0.4)
1.0 (0.04)
20.0 (0.8)
2.0 (0.08)
7.0 (0.28)
8.0 (0.32)
40.0 (1.6)
10.0 (0.4)
20.0 (0.8)
30.0 (1.2)
5.0 (0.02)
8.0 (0.32)
5
2
3
2
2
1
3
3
1
1
5
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
3
2
1
1
1
2
3
2
2
4
1
1
LENGTH
mm (inch)
DIAMETER
QUANTITY
mm (inch)
10.0 (0.4)
10.0 (0.4)
10.0 (0.4)
20.0 (0.8)
7.5 (0.3)
7.5 (0.3)
10.0 (0.4)
10.0 (0.4)
10.0 (0.4)
10.0 (0.4)
20.0 (0.8)
10 (0.4)
20 (0.8)
10 (0.4)
40 (1.6)
2.0 (0.08)
1.0 (0.04)
0.5 (0.02)
1.0 (0.04)
18.0 (0.72)
25 (1.0)
0.3 (0.012)
0.7 (0.03)
1.5 (0.06)
2.5 (0.1)
2.5 (0.1)
1 (0.04)
2 (0.08)
0.1 RADIUS
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
1
PART
NUMBER
A-5000-3604
A-5000-7805
A-5000-4154
A-5000-4155
A-5000-4156
A-5000-4158
A-5000-4160
A-5000-4161
M-5000-4152
M-5000-4153
A-5000-3603
M-5000-4150
A-5000-3614
A-5000-7808
A-5000-7802
A-5000-7803
A-5000-7804
A-5000-7811
A-5000-7800
A-5000-3611
A-5000-7801
A-5000-7809
A-5000-7810
A-5000-7812
A-5000-7813
A-5000-3626
A-5000-7807
A-5000-7806
A-5000-7629
M-5000-4164
A-5000-3627
M-5000-7779
M-5000-3647
M-5000-3648
M-5000-4162
M-5000-7634
A-5000-7534
PART
NUMBER
A-5000-7807
A-5000-7806
A-5000-7805
A-5000-7808
A-5000-7809
A-5000-7810
A-5000-7800
A-5000-7801
A-5000-7802
A-5000-7803
A-5000-7804
A-5000-7811
A-5000-7812
A-5000-7813
M-5000-7779
M-5000-3540
6-4 ACCESSORIES
M2 HIGH PERFORMANCE STYLI KIT
STYLI
TYPE
BALL
BALL
BALL
EXTENSION
EXTENSION
EXTENSION
EXTENSION
GF STYLI TOOL
M2 STYLI TOOL
S20 TIGHTENING
TOOL
LENGTH
mm (inch)
DIAMETER
QUANTITY
mm (inch)
50.0 (1.97)
50.0 (1.97)
50.0 (1.97)
40.0 (1.56)
50.0 (1.97)
70.0 (2.76)
90.0 (3.54)
4.0 (0.16)
5.0 (0.19)
6.0 (0.23)
LENGTH
mm (inch)
DIAMETER
QUANTITY
mm (inch)
1
1
1
1
1
1
1
1
2
2
PART
NUMBER
A-5003-2285
A-5003-2286
A-5003-2287
A-5003-2280
A-5003-2281
A-5003-2282
A-5003-2283
A-5003-2300
M-5000-3540
A-5003-2300
A-5003-2310
M4 STYLI KIT (TP7M USE)
STYLI
TYPE
CERAMIC BALL
BALL
BALL
BALL
BALL
BALL
EXTENSION
EXTENSION
EXTENSION
M4/M3 ADAPTOR
M4/M3 ADAPTOR
M4/M3 ADAPTOR
M4 5 WAY CENTRE
M3 5 WAY CENTRE
M2 5 WAY CENTRE
M3/M2 ADAPTOR
M4/M3 ADAPTOR
TOOL
TOOL
A-5000-7829
20.0 (0.8)
20.0 (0.8)
20.0 (0.8)
50.0 (2.0)
100.0 (4.0)
30.0 (1.2)
50.0 (2.0)
20.0. (0.8)
50.0 (2.0)
75.0 (3.0)
100.0 (4.0)
18.0 (0.72)
13.0 (0.52)
8.0 (0.32)
5.0 (0.2)
9.0 (0.36)
30.0 (1.2)
1.0 (0.04)
2.0 (0.08)
4.0 (0.16)
8.0 (0.32)
8.0 (0.32)
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
5
2
2
1
PART
NUMBER
A-5000-7814
A-5000-7545
A-5000-7547
A-5000-7551
A-5000-7795
A-5000-7796
A-5000-7754
A-5000-7755
M-5000-6625
A-5000-7751
A-5000-7752
A-5000-7753
A-5000-7792
A-5000-7610
A-5000-3627
M-5000-4163
M-5000-6714
M-5000-3540
M-5000-3707
6-5 ACCESSORIES
M5 GENERAL PURPOSE SCANNING STYLI KIT
A-5002-0028
M5 SPHERICAL END SCANNING STYLI KIT
STYLI TYPE
ROUND ENDED
ROUND ENDED
ROUND ENDED
ROUND ENDED
ROUND ENDED
ROUND ENDED
ROUND ENDED
ROUND ENDED
FLAT ENDED
FLAT ENDED
FLAT ENDED
FLAT ENDED
FLAT ENDED
FLAT ENDED
FLAT ENDED
FLAT ENDED
HEM. TIP
HEM. TIP
HEM. TIP
HEM. TIP
FLAT ENDED TIP
FLAT ENDED TIP
FLAT ENDED TIP
FLAT ENDED TIP
EXTENSION
EXTENSION
TOOL
STYLI TYPE
CERAMIC BALL
CERAMIC BALL
CERAMIC BALL
CERAMIC BALL
CERAMIC BALL
HEM. TIP
HEM. TIP
HEM. TIP
HEM. TIP
HEM. TIP
HEM. TIP
HEM. TIP
HEM. TIP
HEM. TIP
ROUND ENDED
FLAT ENDED
EXTENSION
EXTENSION
TOOL
A-5002-0083
LENGTH
mm (inch)
DIAMETER
QUANTITY
mm (inch)
55.0 (2.17)
65.0 (2.56)
70.0 (2.76)
75.0 (2.96)
80.0 (3.15)
80.0 (3.15)
85.0 (3.35)
85.0 (3.35)
55.0 (2.17)
65.0 (2.56)
70.0 (2.76)
75.0 (2.96)
80.0 (3.15)
80.0 (3.15)
85.0 (3.35)
85.0 (3.35)
2.0 (0.08)
3.0 (0.12)
4.0 (0.16)
5.0 (0.20)
6.0 (0.24)
8.0 (0.31)
10.0 (0.39)
12.0 (0.47)
2.0 (0.08)
3.0 (0.12)
4.0 (0.16)
5.0 (0.20)
6.0 (0.24)
8.0 (0.31)
10.0 (0.39)
12.0 (0.47)
16.0 (0.63)
20.0 (0.79)
25.0 (0.98)
30.0 (1.18)
16.0 (0.63)
20.0 (0.79)
25.0 (0.98)
30.0 (1.18)
70.0 (2.76)
100.0 (3.94)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
LENGTH
mm (inch)
DIAMETER
QUANTITY
mm (inch)
97.5 (3.84)
97.0 (3.82)
96.0 (3.78)
95.0 (3.74)
94.0 (3.70)
5.0 (0.20)
6.0 (0.24)
8.0 (0.31)
10.0 (0.39)
12.0 (0.47)
16.0 (0.63)
19.0 (0.75)
20.0 (0.79)
25.0 (0.98)
30.0 (1.18)
32.0 (1.26)
35.0 (1.38)
38.0 (1.50)
40.0 (1.57)
10.0 (0.39)
10.0 (0.39)
85.0 (3.35)
85.0 (3.35)
70.0 (2.76)
100.0 (3.94)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
PART
NUMBER
A-5002-0051
A-5002-0052
A-5002-0053
A-5002-0054
A-5002-0055
A-5002-0056
A-5002-0057
A-5002-0058
M-5002-0020
M-5002-0021
M-5002-0022
M-5002-0023
M-5002-0024
M-5002-0025
M-5002-0026
M-5002-0027
A-5002-0061
A-5002-0063
A-5002-0064
A-5002-0065
A-5002-0071
A-5002-0073
A-5002-0074
A-5002-0075
A-5002-0081
A-5002-0082
M-5002-3707
PART
NUMBER
A-5000-9410
A-5000-9412
A-5000-9416
A-5000-9420
A-5000-9424
A-5002-0061
A-5002-0062
A-5002-0063
A-5002-0064
A-5002-0065
A-5002-0066
A-5002-0067
A-5002-0068
A-5002-0069
A-5002-0057
M-5002-0026
A-5002-0081
A-5002-0082
M-5000-3707
6-6 ACCESSORIES
DATUM BALLS
DATUM SPHERE KIT
Ø12mm
Ø19mm
Ø25mm
Ø3/4in
Ø1in
58mm (2.28in)
A-1034-0028
A-1034-0027
A-1034-0026
A-1034-0031
A-1034-0035
each kit to attach pillar to table surface.
173mm
(6.82in)
nominal
115mm
(4.52in)
nominal
Datum Ball
Datum Ball
Datum Ball
Datum Ball
Datum Ball
FIXING STUD - a fixing stud is required with
Pivot centre
156mm
(6.14in)
nominal
KIT PART NUMBER
THREAD SIZE
PART NUMBER
M6 x 1
M8 x 1.25
M10 x 1.5
5/16in x UNC
3/8in x UNC
M-1034-0016
M-1034-0015
M-1034-0014
M-1034-0018
M-1034-0017
OPTIONAL EXTRAS
PART NUMBER
DATUM BALL
Ø12mm
Ø19mm
Ø25mm
Ø3/4in
Ø1in
Each datum sphere is made from hard wearing
tungsten carbide and is supplied with its own
certificate, giving ball diameter and roundness.
All sphere measurements performed on
equipment tracable to UK (NPL) standards.
Datum Ball
Datum Ball
Datum Ball
Datum Ball
Datum Ball
A-1034-0005
A-1034-0023
A-1034-0002
A-1034-0032
A-1034-0036
ADAPTORS/ EXTENSION
PART NUMBER
2 Way Adaptor
3 Way Adaptor
Pillar Extension
75mm (2.96in) long
M-1034-0042
M-1034-0052
M-1034-0019
GRAM GAUGE
SPECIFICATION
PART NUMBER
OVERALL LENGTH
NEEDLE LENGTH
DEPTH
WIDTH
RANGE
The gram gauge allows the optimum trigger force
to be set to maximise probe performance on all
standard Renishaw touch trigger probes.
P-GAO1-0001
95mm
41mm
27mm
43mm
4 TO 35 GRAM RANGE
WITH 1 GRAM GRADUTIONS
6-7 ACCESSORIES
TECHNICAL SPECIFICATION OF INSPECTION STYLI
STYLUS TYPE
MATERIAL
SPHERICITY
DIAMETRIC
TOLERANCE
HARDNESS
DENSITY
SURFACE FINISH
COEFF. OF
EXPANSION@ 25°C
±2µm
1700 Vickers
4g/cm3
0.025µm Ra
~5x10-6/0C
Ruby balls
Synthetic ruby
monocrystalline AI203
All diameters: 0.15µm
except Ø0.3: 0.25µm
Ceramic hollow balls
White ceramic sintered
alumina AI203
1µm
+0,-10µm
1500 Vickers
3.7g/cm3
0.1µm Ra
~5x10-6/0C
Discs
Silver steel
1µm
±50µm
450 Vickers
8g/cm3
0.4µm Ra
~10.5x10-6/0C
Simple cylinder
Silver steel
Roundness 4µm
±50µm
200 Vickers
8g/cm3
0.4µm Ra
~10.5x10-6/0C
Ball ended cylinder
Synthetic ruby
Concentricity,
ball/cylinder 4µm
±3µm
1700 Vickers
4g/cm3
0.025µm Ra
~5x10-6/0C
Ball ended cylinder
Tungsten Carbide
±20µm end radius
±3µm
1500 Vickers
15g/cm3
0.4µm Ra
~5x10-6/0C
Simple pointer
Silver steel
Cone angle 30°
-
300 Vickers
8g/cm3
0.4µm Ra
~10.5x10-6/0C
Radius end pointer
Stainless steel/Tungsten
Carbide
Cone angle 30°
Tip radius
0.1±0.005mm
1500 Vickers
15g/cm3
0.4µm Ra
~5x10-6/0C
Stylus stems
and extensions
Stainless steel, BS970 303 541
Tungsten Carbide non-magnetic or
White ceramic sintered alumina AI203
0.4µm Ra
~SS 16x10-6/0C
TC & Ceramic 5x10-6/0C
Stainless steel and Tungsten Carbide
Stiffness <0.25µm/g except Ø0.3:0.4µm/g
Ceramic <0.5µm/g
TECHNICAL SPECIFICATION OF SCANNING STYLI
Stylus Type
Material
Sphericity
Diametric tolerance
Hardness
AFBMA Grade 25
1500 Vickers
±10µm (±0.0004”)
45 - 55 Rc
Round Ended
Tungsten Carbide
AFBMA Grade 25
Flat Ended
Stainless Steel
-
Hemispherical Tip
Hardened Steel
Ø16-30 ±2.5µm (±0.0001”)
Ø32-40 ±4.0µm (±0.00016”)
Flat Ended Tips
Hardened Steel
--
±10µm (±0.0004”)
60 - 65 Rc
Ceramic Balls
White ceramic sintered
alumina AI203
±1.5µm (±0.00006”)
±25µm (±0.001”)
1500 Vickers
Extensions
Stainless Steel End Pieces, Aluminium Bodies with Stainless Steel End Pieces.
All bracketed dimensions are the decimal inch equivalent
60 - 65 Rc
6-8 ACCESSORIES
STYLUS MATERIALS
ADVANTAGES
MATERIAL
Stainless Steel
One
piece styli possible
Good
for majority of styli with reasonable
stem length and diameter
Lowest
Tungsten Carbide
DISADVANTAGES
Too
heavy and not stiff enough for very
long styli
Too
weak and not stiff enough for very
small diameter stems
cost
Good
probe performance due to high
stiffness
Too
heavy for long styli
Excellent
for very small diameter stems
due to high strength
Ceramic
Carbon Fibre
Light
Fragile
Lighter
Limited
and stiff, therefore good for
long styli
and stiffer than ceramic, therefore
good for performance and long styli
for small diameter stems
to stem diameters of 3mm or
more, therefore limited to tip diameters
of 4mm or more
6-9 ACCESSORIES
CUSTOM DESIGN SERVICE
The Renishaw Custom Products Group offers a
unique service to provide customers with a total
solution for probing needs on CMM, Machine Tool
or Scanning Applications which may not be
achieved using our range of standard products.
Based within the Group Technology Centre in the
UK, the Custom Products Group includes
Applications, Design, Engineering and
Manufacturing expertise with extensive experience
in providing tailor-made product solutions to
specific customer requirements.
In many application problems, the solution lies in
the choice of stylus. Access of workpiece features,
inspection times and probe performance can all be
influenced by the choice of stylus. All of these
aspects are considered within the design of a
custom stylus, ensuring that the solution provided
incorporates the ideal choice of materials and
designs required to optimise probe performance
within your particular application.
The Renishaw Custom Products Group has
supplied over 3,000 different custom styli into
probing applications worldwide, so the solution to
your custom stylus requirements may already
exist.
This photograph depicts the development of a custom designed
stylus for inspecting a special purpose cutter for Holroyd Machine
Tool and Rotor Ltd.
º
Global solutions from Renishaw
Renishaw is an established world leader in metrology, providing high performance,
cost-effective solutions for measurement and increased productivity. A worldwide
network of subsidiary companies and distributors provides exceptional service and
support for its customers.
Renishaw designs, develops and manufactures products which conform to
ISO 9001 standards.
Renishaw provides innovative solutions with the following products:
Probe systems for inspection on CMMs (co-ordinate measuring machines).
Systems for job set-up, tool setting and inspection on machine tools.
Scanning and digitising systems.
Laser and automated ballbar systems for performance measurement and
calibration of machines.
Encoder systems for high accuracy position feedback.
Spectroscopy systems for non-destructive material analysis in laboratory and
process environments.
Australia - Renishaw Oceania Pty Ltd, Melbourne
Tel +61 3 9553 8267 Fax +61 3 9592 6738
email: australia@renishaw.com
Benelux - Renishaw International BV, Prinsenbeek
Tel +31 76 543 11 00 Fax +31 76 543 11 09
email: benelux@renishaw.com
Brazil - Renishaw Latino Americana Ltda, São Paulo
Tel +55 11 4195 2866 Fax +55 11 4195 1641
email: brazil@renishaw.com
The People’s Republic of China
Renishaw Representative Office, Beijing
Tel +86 10 6410 7993 Fax +86 10 6410 7992
email: china@renishaw.com
Renishaw Representative Office, Shanghai
Tel +86 21 6353 4897/5697 Fax +86 21 6353 4881
email: china@renishaw.com
France - Renishaw S.A., Marne la Vallée
Tel +33 1 64 61 84 84 Fax +33 1 64 61 65 26
email: france@renishaw.com
Germany - Renishaw GmbH, Pliezhausen
Tel +49 7127 9810 Fax +49 7127 88237
email: germany@renishaw.com
Hong Kong - Renishaw (Hong Kong) Ltd, Kowloon Bay
Tel +852 2753 0638 Fax +852 2756 8786
email: hongkong@renishaw.com
India - Renishaw Metrology Systems Pvt Ltd, Bangalore
Tel +91 80 5320 144 Fax +91 80 5320 140
email: india@renishaw.com
Indonesia - Renishaw Representative Office, Jakarta
Tel +62 21 428 70153 Fax +62 21 424 3934
email: indonesia@renishaw.com
Italy - Renishaw S.p.A., Torino
Tel +39 011 966 10 52 Fax +39 011 966 40 83
email: italy@renishaw.com
Japan - Renishaw K.K., Tokyo
Tel +81 3 5332 6021 Fax +81 3 5332 6025
email: japan@renishaw.com
Singapore - Renishaw Representative Office
Tel +65 8975466 Fax +65 8975467
email: singapore@renishaw.com
South Korea - Renishaw Liaison Office, Seoul
Tel +82 2 565 6878 Fax +82 2 565 6879
email: southkorea@renishaw.com
Spain - Renishaw Iberica S.A., Barcelona
Tel +34 93 478 21 31 Fax +34 93 478 16 08
email: spain@renishaw.com
Switzerland - Renishaw A.G., Pfäffikon
Tel +41 55 410 66 66 Fax +41 55 410 66 69
email: switzerland@renishaw.com
Taiwan - Renishaw Representative Office
Tel +886 4 251 3665 Fax +886 4 251 3621
email: taiwan@renishaw.com
UK (Head Office) - Renishaw plc, Gloucestershire
Tel +44 1453 524524 Fax +44 1453 524901
email: uk@renishaw.com
Authorised distributor
USA - Renishaw Inc., Illinois
Tel +1 847 286 9953 Fax +1 847 286 9974
email: usa@renishaw.com
For all other countries
Tel +44 1453 524524 Fax +44 1453 524901
email: international@renishaw.com
www.renishaw.com
1996 Renishaw plc
Printed in England 0501 Part No. H-1000-3200-08-B