Smart Spaces

Transcription

Smart Spaces

cover_final:Layout 1
12/8/09
1:35 PM
Page 1
Häfele Showrooms
SMART SPACES 2009
Smart Spaces
Smart Wardrobes, Laundry & Living
Häfele (N.Z.) Head Office
Eastern Design Centre
16 Accent Drive
East Tamaki
Auckland
P (09) 274 2040
F (09) 274 2041
info@hafele.co.nz
Auckland Design Centre
20 Beaumont Street
St Mary’s Bay
Auckland
P (09) 274 2530
F (09) 274 2531
architectural@hafele.co.nz
Wellington Design Centre
The Wool Store Level 1
262 Thorndon Quay
Wellington
P (04) 472 0294
F (04) 472 0295
wellington@hafele.co.nz
Christchurch Design Centre
5 Wigram Close
Sockburn
Christchurch
P (03) 343 8200
F (03) 343 8201
christchurch@hafele.co.nz
www.hafele.com • freephone 0800 4 HAFELE
732.WARDROBE
This catalogue is for the use of the recipient only. It remains in all respects the property of Häfele. Reproduction of this brochure in whole or in part, or the reproduction
of the illustrations as well as the copying of the layout, is strictly prohibited. All measurements given in this publication are not binding. Rights for design improvements
reserved. No responsibility for typographical or other errors occurring in the catalogue production. All deliveries made corresponding to Häfele sales conditions. August
2009. Copyright by Häfele. All rights reserved. Printed in New Zealand.
A COLLECTION OF QUALITY LIVING ACCESSORIES
Smart Spaces
Häfele’s latest offering to the marketplace is Smart Spaces –
put together to enhance our already vast product selection by
focusing on those often forgotten areas of the home, such as
bedrooms, wardrobes and laundries.
Smart Spaces will fulfill all your hardware requirements when
designing around small and difficult areas of your home by offering
savvy solutions to these common problems. This catalogue shows
Häfele’s strength as a hardware provider and offers you the total
package for every corner of your interior building aspects, offering
a premium range of high end products right through to our value
economy range.
Smart Spaces. For Smart Wardrobes, Laundry & Living areas.
Our ability to successfully source products from around the globe coupled
with our desire to keep you in touch with constantly evolving design
concepts, allows us to bring you the very latest product offerings, such as
our Elite range of soft closing wardrobe fittings and accessories (pg 1-12),
Slider E35 for flush fitting soft closing sliding doors (pg 105) to the Desk and
bed combo fitting (pg 85) which allows a desk and bed to accommodate the
same space, offering a solution to the common question: “Should the spare
room be a bedroom or an office?” Now it can be both.
Due to constant hardware evolution and valued customer feedback, the
current Häfele
program for kit set or fully assembled aluminium frame
glass doors will include the new Aluflex 80 soft closing sliding door system
(pg 99-102) and the well priced Indamatic soft close door system (pg 97-98).
From October 2009 you will have the facility to specify door sizes and panel
options through our simple to navigate, on-line door ordering program which
will be available on our website
Please visit our website www.hafele.com
or contact our sales team 0800-hafele for more details.
Smart Spaces 09 / HNZ
www.hafele.com
Smart Spaces
Smart Wardrobes
1 - 69
Elite Pull-Out Storage Systems 1-12
Dream Pull-Out Storage Systems 13-19
Clothing, Shoe & Accessory Racks 20-29
Wireware & Timber Pull-Out
Storage Options 30-33
Drawer Systems 34-37
Wardrobe Lifts & Accessories 38-41
Shelving Systems 42-54
Wardrobe Hooks 55-64
Wardrobe Railing Systems 65-69
Smart Laundry
70 - 80
Laundry Baskets & Hampers 70-72
Ironing Boards 73
Step Stools 74
Laundry Organisation & Storage 75-77
Ventilation Systems 78-79
Sanitation 80
Smart Bedrooms
81 - 94
Bedframes & Fittings 81-88
Television Accessories 89-90
Sliding Ladders 91-93
Roller Shutter Door 94
Smart Doors
95 - 115
Sliding Doors 95-111
Pivot Sliding Doors 112-114
Smart Lighting
116 - 126
Halogen Lighting 117-119
High Voltage Lighting 120-121
Down Lighting 123
Transformers & Accessories 124
Strip Lighting 125
LED Lighting 126
www.hafele.com
Dimensions in mm Dimensional data not binding. We reserve the right to alter specifications without notice.
Smart Spaces
Smart Organisation Elite Range
www.hafele.com
1
Smart Spaces
Elite Pull-Out Storage Systems
Pull-out frames
With soft close GRASS runners and chrome detail
• Max. weight load
per frame:
40 kg
Internal cabinet
width range mm
Useable space
for accessories
Cat. No.
White
410 - 550
550 - 690
690 - 830
830 - 970
970 - 1100
310 - 450
450 - 590
590 - 730
730 - 870
870 - 1000
805.85.731
805.85.732
805.85.733
805.85.734
805.85.735
Packing: 1 piece
Smart Wardrobes
2
526 x 68 mm (D x H) excluding accessories.
Width determined below.
Note
To help with selecting the correct individual components for use with
the Soft Closing pull-out frames the following information applies.
The useable space for accessories is determined by the internal
cabinet width - 100 mm
i.e For a 900 mm overall cabinet with 16 mm sides your useable
space for accessories is: 900 - 32 = 868 - 100 = 768 mm
www.hafele.com
• Dimensions:
Smart Spaces
Pull-out frames
With soft close GRASS runners and chrome detail
Under shelf mounting bracket for pull-out frames
Material
Steel
Finish
White
Cat. No.
805.78.760
25 mm Spacer blocks for pull-out frames
Material
ABS Plastic
Finish
White
Packing: 1 piece
www.hafele.com
Cat. No.
558.00.000
Smart Wardrobes
Packing: 1 piece
3
Smart Spaces
Fittings for pull-out frames
Chrome wire baskets
Width mm
305
410
490
730
Depth mm
510
510
510
510
Height mm
151
151
151
151
Cat. No.
805.83.105
805.83.101
805.83.102
805.83.103
Height mm
87
87
87
87
Cat. No.
805.83.125
805.83.121
805.83.122
805.83.123
Height mm
200
200
Cat. No.
805.84.101
805.84.102
Packing: 1 piece
Chrome wire shelves
Width mm
305
410
490
730
Depth mm
510
510
510
510
Packing: 1 piece
Chrome shoe racks
Width mm
390
470
Depth mm
510
510
Epoxy coated steel tray baskets
With beech inserts
• Dimensions:
305 x 505 x 86 mm (W x D x H)
Cat. No.
805.83.750
Finish
White epoxy coated
Smart Wardrobes
Packing: 1 piece
• Dimensions:
305 x 505 x 148 mm (W x D x H)
Cat. No.
805.83.760
Finish
White epoxy coated
Packing: 1 piece
* Actual colour differs from image shown
Beech insert for ties, belts and accessories
Width mm
300
Depth mm
476
Height mm
60
Cat. No.
805.83.370
Packing: 1 piece
Frames
Fo r Pu ll-O u t
se e Page 2
4
www.hafele.com
Packing: 1 piece
Smart Spaces
Shatter proof trays
Shatter proof plastic trays
Width mm
240
320
400
480
Depth mm
508
508
508
508
Height mm
85
85
85
85
Cat. No.
805.83.481
805.83.482
805.83.483
805.83.484
Height mm
43
Cat. No.
807.49.390
Packing: 1 piece
Width mm
98
Depth mm
440 - 520
Packing: 1 piece
Quilted cotton basket liners
Width mm
240
320
400
480
Depth mm
465
465
465
465
Height mm
5
5
5
5
Cat. No.
805.83.491
805.83.492
805.83.493
805.83.494
Smart Wardrobes
Shatter proof object tray
Packing: 1 piece
Frames
Fo r Pu ll-O u t
se e Page 2
www.hafele.com
5
Smart Spaces
Laundry hampers
Steel frame with removable linen bag
Width mm
460
Depth mm
505
Height mm
430
Cat. No.
805.82.120
Beech frame with removable linen bag
Width mm
455
Depth mm
510
Height mm
445
Cat. No.
805.82.310
Packing: 1 piece
Frames
Fo r Pu ll-O u t
se e Page 2
6
www.hafele.com
Smart Wardrobes
Packing: 1 piece
Smart Spaces
Side pull-out units
Side mounted two tier pull-out
With soft-close GRASS runners
• Dimensions:
• Load capacity:
291 x 521 x 580 mm (W x D x H)
40 kg
Finish
Fixing
White epoxy coated
with chrome wire
Right handed 805.81.060
Left handed
Cat. No.
805.81.061
Side mounted three tier pull-out
• Dimensions:
• Load capacity:
291 x 521 x 772 mm (W x D x H)
40 kg
Finish
Fixing
White epoxy coated
with chrome wire
Left handed
Cat. No.
805.81.063
Smart Wardrobes
Packing: 1 piece
Packing: 1 piece
g Aid s
Fo r Mou n ti n
12
se e Page s 3 &
www.hafele.com
7
Smart Spaces
Side pull-out units
Side mounted two tier pull-out
With angled shelves for footwear
291 x 521 x 580 mm (W x D x H)
40 kg
Finish
Fixing
White epoxy coated
with chrome wire
Left handed
Cat. No.
805.81.071
Smart Wardrobes
Packing: 1 piece
Side mounted three tier pull-out
• Version:
• Dimensions:
• Load capacity:
With angled shelves for footwear
291 x 521 x 772 mm (W x D x H)
40 kg
Finish
Fixing
White epoxy coated
with chrome wire
Left handed
Cat. No.
805.81.073
Packing: 1 piece
g Aid s
Fo r Mou n ti n
12
se e Page s 3 &
8
www.hafele.com
• Version:
• Dimensions:
• Load capacity:
Smart Spaces
Trouser holders
Chrome wire trouser holder
Width mm
455
Depth mm
510
Height mm
103
Cat. No.
807.48.120
Height mm
60
Cat. No.
807.49.310
Height mm
60
Cat. No.
807.49.302
Packing: 1 piece
Width mm
455
Depth mm
510
Packing: 1 piece
Beech trouser holder
Width mm
720
Depth mm
510
Smart Wardrobes
Packing: 1 piece
Fo r Pu ll-O u t
se e Page 2
Frames
www.hafele.com
9
Smart Spaces
Accessories
Pull out trouser rack
• Fixing:
• Mounting:
• Dimensions:
• Load capacity:
Left or right handed
Side
With single extension ball bearing slide
257 x 526 x 290 mm (W x D x H)
10 kg
Finish
Cat. No.
White epoxy coated with chrome wire
807.47.020
Packing: 1 piece
Pull out clothes hanger
• Mounting:
• Dimensions:
• Load capacity:
Top
84 x 526 x 163 mm (W x D x H)
5 kg
Finish
Cat. No.
807.45.030
Packing: 1 piece
• Fixing:
• Mounting:
• Dimensions:
• Load capacity:
Side
163 x 526 x 84 mm (W x D x H)
5 kg
Finish
Cat. No.
807.46.030
Smart Wardrobes
Packing: 1 piece
Pull out pivoting suit rack
• Mounting:
• Dimensions:
• Load capacity:
Side mounted on pivoting hinges
215 x 536 x 373 mm (W x D x H)
20 kg
Finish
Cat. No.
805.79.030
Packing: 1 piece
g Aid s
Fo r Mou n ti n
12
se e Page s 3 &
10
www.hafele.com
Pull out belt rack / tie rack
Smart Spaces
Pull-out pivoting mirror
•
•
•
•
Mounting:
Fixing:
Dimensions:
Version:
Side mounted. Left or right handed.
Via pivoting bracket
135 x 536 x 949 mm (W x D x H)
Finish
Cat. No.
805.79.780
Multi purpose tray
• Fixing:
• Dimensions:
• Version:
For fixing to the bottom of the mirror
as shown above.
164 x 508 x 48 mm (W x D x H)
Overall mirror size fitted with tray:
242 x 536 x 949 mm (W x D x H)
Finish
Smart Wardrobes
Packing: 1 piece
Cat. No.
805.79.770
Packing: 1 piece
www.hafele.com
11
Smart Spaces
Fitting accessories
Pivoting hinge
• Dimensions:
• Material:
31 x 153 x 84 mm (W x D x H)
Powder-coated steel
Finish
Cat. No.
White
805.78.723
Packing: 1 piece
* Actual finish differs from image shown
* For accessories pg 7-11
ABS spacer
For pull-out accessories
• Dimensions:
• Material:
13 x 120 x 84 mm (W x D x H)
ABS plastic
Finish
Cat. No.
White
805.78.750
Packing: 1 piece
ABS spacer
For pull-out accessories and pivot hinge
32 x 142 x 84 mm (W x D x H)
ABS plastic
Finish
Cat. No.
White
805.78.751
Packing: 1 piece
Smart Wardrobes
25 mm Spacer blocks
For pull-out frames
• Material:
ABS plastic
Finish
Cat. No.
White
805.78.740
Packing: 1 piece
Under shelf mounting bracket
For pull-out frames
• Material:
Steel
Finish
Cat. No.
White
805.78.760
Packing: 1 piece
12
www.hafele.com
• Dimensions:
• Material:
Smart Wardrobes
Smart Spaces
Smart Organisation Dream Range
www.hafele.com
13
Smart Spaces
Dream Pull-Out Storage Systems
Smart Wardrobes
• Dimensions:
14
• Max. weight load
per frame:
505 x 89 mm (D x H) excluding accessories.
Width determined below.
10 kg
Note
To help with selecting the correct individual components for use with
the Soft Closing pull-out frames the following information applies.
505 / 328
The useable space for accessories is determined by the internal
cabinet width - 80 mm
i.e For a 900 mm overall cabinet with 16 mm sides your useable
space for accessories is: 900 - 32 = 868 - 80 = 788 mm
www.hafele.com
Pull-out frames
Smart Spaces
Pull-out frames
Pull-out frame for baskets and accessories
• Finish:
• Version:
Silver grey aluminium
Useable space for Cat. No.
Cat. No.
Internal cab.
width range mm accessories mm Depth 328 mm Depth 505 mm
410 - 550
330 - 470
805.85.251
805.85.221
550 - 690
470 - 610
805.85.252
805.85.222
690 - 830
610 - 750
805.85.253
805.85.223
830 - 970
750 - 890
805.85.254
805.85.224
970 - 1100
890 - 1020
805.85.255
805.85.225
Under shelf mounting bracket for pull-out frames
Depth mm
Cat. No.
505
328
805.78.002
805.78.280
Packing: 1 piece
www.hafele.com
Smart Wardrobes
Packing: 1 piece
15
Smart Spaces
Silver wire baskets
Width mm
Height mm
330
380
410
490
730
880
410
490
730
151
151
151
151
151
151
309
309
309
Cat. No.
Depth 338 mm
805.84.221
805.84.222
805.84.223
Cat. No.
Depth 510 mm
805.83.205
805.83.200
805.83.201
805.83.202
805.83.203
805.83.204
805.84.231
805.84.232
805.84.233
Packing: 1 piece
Silver wire shelves
Width mm
Height mm
Cat. No.
Depth 338 mm
Cat. No.
Depth 510 mm
330
410
490
730
87
87
87
87
805.84.241
805.84.242
805.84.243
805.84.244
805.83.220
805.83.221
805.83.222
805.83.223
Packing: 1 piece
Width mm
Height mm
Cat. No.
Depth 338 mm
Cat. No.
Depth 510 mm
390
470
200
200
805.84.251
805.84.252
805.84.201
805.84.202
Smart Wardrobes
Packing: 1 piece
Beech insert for ties, belts and accessories
Width mm
300
Height mm
60
Cat. No.
805.83.370
Packing: 1 piece
* For use with shatter proof trays, page 17
Fo r Pu ll-O u t
se e Page 15
16
Depth mm
476
www.hafele.com
Frame
Silver shoe rack
Smart Spaces
Width mm
240
320
400
480
Depth mm
508
508
508
508
Height mm
85
85
85
85
Cat. No.
805.83.481
805.83.482
805.83.483
805.83.484
Height mm
43
Cat. No.
807.49.390
Height mm
5
5
5
5
Cat. No.
805.83.491
805.83.492
805.83.493
805.83.494
Packing: 1 piece
Shatter proof object tray
Width mm
98
Depth mm
440 - 520
Packing: 1 piece
Shatter proof plastic tray
Quilted cotton basket liner
Width mm
240
320
400
480
Depth mm
465
465
465
465
Packing: 1 piece
White aluminium wire trouser holder
Width mm
Height mm
380
480
720
103
103
103
Cat. No.
Cat. No.
Depth 338 mm Depth 510 mm
807.48.231
807.48.232
807.48.200
807.48.201
807.48.202
Height mm
60
Cat. No.
807.49.301
Height mm
60
Cat. No.
807.49.302
Packing: 1 piece
Width mm
480
Depth mm
510
Packing: 1 piece
Width mm
720
Depth mm
510
Smart Wardrobes
Packing: 1 piece
Frame
Fo r Pu ll-O u t
se e Page 15
www.hafele.com
17
Smart Spaces
Laundry hampers
Steel frame with removable linen bag
Width mm
460
Depth mm
505
Height mm
430
Cat. No.
805.82.200
Packing: 1 piece
Beech frame with removable linen bag
Width mm
455
Depth mm
510
Height mm
445
Cat. No.
805.82.300
Packing: 1 piece
Side pull-out units
Side mounted pull-out frame with baskets
Width mm
Silver grey
With single extension ball bearing slides
10 kg
Depth mm
With 2 baskets
504
295
With 3 baskets
306
504
Height mm
Cat. No.
598
805.81.241
789
805.81.242
Smart Wardrobes
Packing: 1 piece
Side mounted pull-out for shoes
• Finish:
• Version:
• Load capacity:
Width mm
With 2 shelves
306
With 3 shelves
306
Silver grey
With single extension ball bearing slides
10 kg
Depth mm
Height mm
Cat. No.
504
598
805.81.251
504
789
805.81.252
Packing: 1 piece
Frame
Fo r Pu ll-O u t
se e Page 15
18
www.hafele.com
• Finish:
• Version:
• Load capacity:
Smart Spaces
Accessories
•
•
•
•
Finish:
Mounting:
Version:
Load capacity:
Side mounted
5 kg
Width mm
Height mm
Cat. No.
Depth 330 mm
Cat. No.
Depth 499 mm
145
94
807.46.240
807.46.220
Packing: 1 piece
Collapsible pull-out trouser holder
•
•
•
•
Finish:
Mounting:
Version:
Load capacity:
Width mm
258
Side mounted
5 kg
Depth mm
536
Height mm
232
Pull-out tie and belt rack for 13 pieces
Cat. No.
807.47.210
Packing: 1 piece
Pull-out wardrobe rail
•
•
•
•
Finish:
Mounting:
Version:
Load capacity:
Top mounted
5 kg
Width mm
Height mm
Cat. No.
Depth 319 mm
Cat. No.
Depth 500 mm
85
175
807.45.240
807.45.220
Packing: 1 piece
Pull-out suit rack
Finish:
Mounting:
Version:
Load capacity:
Width mm
224
Silver grey, aluminium
Side mounted
10 kg
Depth mm
538
Height mm
364
Cat. No.
805.79.220
Packing: 1 piece
Swing out hinge, for side mounted accessories
• Finish:
Width mm
31
Silver grey, aluminium
Depth mm
247
Height mm
84
Cat. No.
805.78.022
Smart Wardrobes
•
•
•
•
Packing: 1 piece
Spacers,
For side mounted accessories and pull-out frames
• Finish:
Grey, ABS plastic
Width mm
Depth mm
Height mm
Cat. No.
13.5
32
31
53
85
85
805.78.032
805.78.033
Packing: 1 piece
www.hafele.com
19
Smart Spaces
Extending Wardrobe Rails
Extending wardrobe rails
42
60
• Material:
• Finish:
• Mounting:
Steel/plastic
Nickel-plated
Screw fixing beneath shelves
Length mm
310
360
410
Load capacity kg
6
5
4
Cat. No.
805.01.711
805.01.720
805.01.739
Packing: 1 piece
19
• Material:
• Finish:
• Mounting:
44
Steel/plastic
Nickel-plated
Length mm
355
Load capacity kg
5
Cat. No.
805.02.727
Packing: 1 piece
40
45
• Material:
• Finish:
• Mounting:
Length mm
290
340
390
Steel/plastic
Nickel-plated
Load capacity kg
10
440
Colour
White
White
White
Brown
White
Cat. No.
805.12.303
805.12.358
805.12.401
805.12.410
805.12.456
20
• Material:
36
• Finish:
• Mounting:
• Version:
Length mm
355
455
Aluminium track, plastic cover plate and
sliding rings
Matt silver
Cover plate and sliding rings: white
Top mounting
With adjustable sliding rings and cover plate
Load capacity kg
30
35
Cat. No.
805.04.356
805.04.454
Smart Wardrobes
Packing: 1 piece
•
•
•
•
Material:
Finish:
Version:
Dimensions:
Length mm
500
319
Aluminium rail, plastic mounting plate
85 x 500 x 175 mm (W x D x H)
Load capacity kg
5
5
Cat. No.
807.45.220
807.45.240
Packing: 1 piece
•
•
•
•
Material:
Finish:
Version:
Dimensions:
Aluminium rail, plastic mounting plate
With chrome wire, white epoxy
84 x 526 x 163 mm (W x D x H)
Length mm
Load capacity kg
Cat. No.
526
5
807.45.030
Packing: 1 piece
20
www.hafele.com
Packing: 1 and 5 pieces
Smart Spaces
Tie and Belt Racks
Fixed tie and belt racks
• Material:
• Mounting:
28
22
Zinc-alloy
Screw fixing to side panels
Finish
Nickel-plated, polished
Length mm
400
Cat. No.
807.20.743
Packing: 1 piece
Tie rack for screw fixing to side panel, hinged
• Material:
• Mounting plate:
Steel
Ø60 mm
Finish
Chrome-plated, polished
Length mm
320
Cat. No.
805.43.200
Tie rack
Packing: 1 piece
Pull-out tie and belt rack for 13 pieces
• Version:
• Dimensions:
145 x 94 mm (W x H)
Finish
Length
Cat. No.
499
330
807.46.220
807.46.240
Packing: 1 set
Tie and belt rack, swivels by 90°
• Material:
• Installation width:
Steel rail, zinc-alloy bearing
320 mm
Finish
Chrome-plated
Cat. No.
807.16.203
Supplied with
Fixing material
Fixed belt rack, for 7 belts
• Dimensions:
432 x 48 x 47 mm (W x D x H)
Plastic parts colour
Transparent
Beige
Black
Cat. No.
807.25.955
807.25.945
807.25.935
Smart Wardrobes
Packing: 1 piece
Packing: 1 piece
Fixed tie rack, for 28 ties
• Dimensions:
432 x 48 x 47 mm (W x D x H)
Transparent
Beige
Black
Cat. No.
807.22.951
807.22.941
807.22.931
Packing: 1 piece
www.hafele.com
21
Smart Spaces
Tie and Belt Racks
Extending tie and belt racks
Tie rack
•
•
•
•
Finish:
Version:
Mounting:
Dimensions:
White epoxy coated, with chrome wire
Side mounted, fixing left or right handed
163 x 526 x 84 mm (W x D x H)
Cat. No.
807.46.030
Packing: 1 piece
Tie rack extending, for 17 ties
• Material:
• Finish:
• Version:
• Dimensions:
Steel
Extension: polished chrome-plated,
Runner cover: powder-coated
white aluminium
For right and left hand use
130 x 540 x 90 mm (W x D x H)
Cat. No.
807.41.206
Packing: 1 piece
Tie rack
• Version:
• Dimensions:
With non-slip rails
74 x 455 x 87 mm (W x D x H)
Cat. No.
807.41.210
Packing: 1 piece
• Version:
• Dimensions:
With non-slip rails. 5 hooks and 9 rails
74 x 455 x 118 mm (W x D x H)
Cat. No.
807.41.211
Smart Wardrobes
Packing: 1 piece
Tie rack, for 32 ties
• Dimensions:
• Installation:
500 x 76 mm (W x D)
Screw fixing
Cat. No.
Transparent
Beige
807.21.950
807.21.940
Black
807.21.930
Packing: 1 piece
Belt rack
• Dimensions:
• Installation:
Transparent
Beige
Black
500 x 76 mm (W x D)
Screw fixing, hole spacing 64 mm
Cat. No.
807.25.950
807.25.940
807.25.930
Packing: 1 piece
22
www.hafele.com
Tie and belt rack
Smart Spaces
Tie and Belt Racks
Economy fittings
•
•
•
•
Mounting:
Capacity:
Finish:
Dimensions:
To be used left or right
For 29 ties
Silver anodised, translucent plastic
130 x 450 x 80 mm (W x D x H)
Cat. No.
807.53.940
Packing: 1 set
Extending tie rack with tray
•
•
•
•
Mounting:
Capacity:
Finish:
Dimensions:
To be used right handed
For 16 ties
130 x 455 x 80 mm (W x D x H)
Extending tie rack
Cat. No.
807.53.941
Packing: 1 set
Belt rack
•
•
•
•
Mounting:
Capacity:
Finish:
Dimensions:
For 7 belts
White, plastic
140 x 435 x 62 mm (W x L x H)
Cat. No.
807.53.942
Packing: 1 set
•
•
•
•
Mounting:
Capacity:
Finish:
Dimensions:
For 4 pairs of trousers
220 x 450 x 80 mm (W x D x H)
Cat. No.
807.53.947
Packing: 1 set
Shelf fixing bracket
• Finish:
• Dimensions:
Transparent plastic
50 x 100 x 98 mm (W x D x H)
Smart Wardrobes
Extending trouser / scarf rack
Cat. No.
807.21.090
Packing: 1 set
www.hafele.com
23
Smart Spaces
Trouser and Skirt Racks
Trouser racks
Extending, for 10 pairs of trousers, width 465 mm
• Material:
• Finish:
• Version:
• Dimensions:
Steel
Extension: polished chrome-plated,
Runner cover: powder-coated
white aluminium
For right and left hand use
465 x 505 x 100 mm (W x D x H)
Cat. No.
805.45.204
Packing: 1 piece
For 32 ties, 4 pairs of trousers or 4 skirts
• Material:
• Finish:
• Dimensions:
Aluminium support rack and rails
Plastic screw-on parts and hooks or clips
Support rack and rails, silver coloured
anodised, screw-on parts and hooks
transparent beige or black
500 x 215 mm (W x D)
Transparent
Beige
Black
Cat. No.
807.23.993
807.23.943
807.23.933
Packing: 1 piece
• Material:
• Finish:
• Colour:
• Version:
• Dimensions:
Extension: Steel
Mounting block and spacer: Plastic
Extension: Chrome-plated, polished
Mounting block and spacer: Silver coloured
With glide and spacer to compensate for
door offset, with non-slip rails,
for right and left hand use
222 x 455 x 72 mm (W x D x H)
Cat. No.
805.45.210
Packing: 1 piece
Smart Wardrobes
Trouser rack, for 11 pairs of trousers
•
•
•
•
•
•
Material:
Finish:
Colour:
Version:
Installation:
Dimensions:
Hanger: Steel
Hanger: Chrome polished
Handle: Black
Extension guided by ball bearing runner
For screw fixing to top panel
460 x 340 x 105 mm (W x D x H)
Cat. No.
805.93.240
Packing: 1 piece
Collapsible pull-out trouser holder
•
•
•
•
Material:
Finish:
Version:
Dimensions:
Aluminium
258 x 536 x 232 mm (W x D x H)
Cat. No.
807.47.210
Packing: 1 piece
24
www.hafele.com
Extending, for 3 pairs of trousers, width 222 mm
Smart Spaces
Trouser and Skirt Racks
Trouser racks
• Finish:
• Fixing:
• Mounting:
• Dimensions:
White epoxy coated, with chrome wire
Side
251 x 526 x 262 mm (W x D x H)
Cat. No.
807.47.020
Packing: 1 piece
Trouser rack, swivelling for 7 pairs of trousers
•
•
•
•
•
Material:
Finish:
Mounting:
Dimensions:
Version:
Pull out trouser rack
Steel
chrome-plated, polished
For screw fixing to under side of shelf
430 x 430 x 75 mm (W x D x H)
With non-slip rails
Cat. No.
805.46.201
Packing: 1 piece
Trouser rack, swivelling for 6 pairs of trousers
•
•
•
•
Material:
Finish:
Mounting:
Dimensions:
Steel
Chrome polished
For screw fixing to side panel
75 x 430 x 80 mm (W x D x H)
Cat. No.
805.93.250
Trouser rack, pull-out with full extension slides
• Material:
• Mounting:
• Dimensions:
Aluminium trouser rack,
steel wire trouser hangers
Single extension ball bearing slide
354 x 58 mm (D x H)
Width mm No. of hangers Finish
supplied
457
12
610
18
762
24
Chrome, polished
Aluminium, matt
Chrome, polished
Aluminium, matt
Chrome, polished
Aluminium, matt
Cat. No.
805.58.231
805.58.931
805.58.233
805.58.933
805.58.235
805.58.935
Smart Wardrobes
Packing: 1 piece
Packing: 1 piece
www.hafele.com
25
Smart Spaces
Accessories
Accessories
Pull-out basket
• Installation:
• Material:
• Version:
Aluminium anodised frame, steel chrome
polished basket, plastic silver corners
Pull-out frame mounted on ball bearing
runners
For cab. width mm
Dimensions mm
(W x D x H)
Cat. No.
600
700
800
564 x 460 x 130
664 x 460 x 130
764 x 460 x 130
805.93.901
805.93.902
805.93.903
Packing: 1 set
Supplied with
Fixing material
Trouser rack
• Installation:
• Material:
• Version:
Aluminium anodised frame, aluminium rails
silver plastic corners
Pull-out frame mounted on ball bearing
runners, for 10 pairs of trousers
For cab. width mm
Dimensions mm
(W x D x H)
Cat. No.
600
700
800
564 x 460 x 130
664 x 460 x 130
764 x 460 x 130
805.93.911
805.93.912
805.93.913
Pesolo pull-out accessories rack
• Material:
• Finish:
Smart Wardrobes
• Mounting:
Steel and plastic
Runners: Silver coloured
Trays: Dark grey
Side mounting
Dimensions mm
(W x D x H)
Cat. No.
110 x 457 x 105
807.65.200
Packing: 1 set
Set includes
Single extension runners
2 x Trays
10 x Hooks
2 x Spacers (10 mm)
Supplied with
Fixing material
26
www.hafele.com
Sm artSpaces 09 /H N Z
Packing: 1 set
Smart Spaces
Shoe Storage
Shoe racks
• Material:
• Version:
• Installation:
45
411
Steel wire
With fixing holes
Screw fixing to wall
220
Finish
Plastic-coated white aluminium
26
Cat. No.
544.43.210
Packing: 1 piece
For 2 or 3 pairs, width 420 mm or 630 mm
420
105
110
• Material:
• Version:
• Installation:
160
630
For
2 Pairs
3 Pairs
160
Steel wire
With fixing holes
Finish
White plastic-coated
White plastic-coated
For 2 pairs, width 411 mm
Cat. No.
544.43.757
544.43.766
Packing: 1 piece
Width 460 – 750 mm, continuously adjustable
• Material:
• Installation:
200
Steel rail, plastic screw-on parts
Screw fixing independently or with
wall rail 892.12.390
460–750
Finish
Cat. No.
Chrome-plated rail and silver coloured screw-on parts 892.12.906
Packing: 1 piece
Wall rail, length 1120 mm for above
• Area of application:
• Material:
• Version:
• Installation:
Mounting of multiple shoe
racks, 892.12.906
Aluminium rail, plastic end caps
With end caps
Finish
Chrome-plated rail and silver coloured end caps
Cat. No.
892.12.990
Packing: 1 pair
Width 560 – 1000 mm, continuously adjustable
• Material:
• Colour:
560–1000
• Installation:
102
221
Installation options
Rail colour
Aluminium coloured
Black
Smart Wardrobes
85
Steel rail, plastic rail mounts
Rail aluminium coloured or black, plastic
parts grey or black
Installation in shoe cupboards
Grey
Black
Cat. No.
892.11.901
892.11.300
Packing: 1 piece
Supplied with
Fixing material
www.hafele.com
27
Smart Spaces
Synergy Collection
Shoe rail
Shoe rail, cut to size
Ø19
• Length:
1
914 mm
Finish
Chrome, polished
Aluminium, matt
Cat. No.
805.87.210
805.87.910
Packing: 48 pieces
Shoe rail bracket
28.6
Rear rod can be positioned upwards, allowing shoes to be displayed
on an incline.
• Diameter:
• Material:
• Length:
Ø19 mm
Aluminium, anodised
762 mm
Finish
Chrome, polished
Aluminium, matt
32
Cat. No.
805.87.200
805.87.900
• Material:
Connects the shoe rail to the side panel
using 32 mm line bore holes with 5 mm
press in dowels
Aluminium, anodised
Finish
Black
Packing: 48 pieces
Cat. No.
805.87.993
Packing: 96 pieces
Smart Wardrobes
Pull-out with full extension slides and removable bags
Tilt–out with removable bags
Built-in handles make
it easy to remove the
bags.
• Depth:
• Height:
• Material:
355 mm
530 mm
Frame: aluminium, anodised bag: nylon
Internal Installation No. of
Width mm
bags
457
610
762
1
2
2
Finish
Cat. No.
Chrome, polished
Aluminium, matt
807.52.231
807.52.931
Chrome, polished
Aluminium. matt
807.52.233
807.52.933
Chrome, polished
Aluminium, matt
807.52.235
807.52.935
Frame attaches to the
back of tilt - out door.
• Mounting:
• Depth:
• Height:
• Material:
Screw mounts to back of door
345 mm
600 mm, from top of the frame to the
bottom of the bag
Frame: steel, epoxy - coated bag: nylon
Internal Installation No. of bags Finish
Width mm
412
565
714
1
2
2
Cat. No.
Black
Black
547.43.301
547.43.303
Black
547.43.305
Packing: 3 sets
Note: When bags are loaded, height will be greater than specified
Packing: 1 set
28
www.hafele.com
Laundry hampers
Smart Spaces
Synergy collection
Tie, belt and scarf racks with ¾ extension slide
• Material:
• Dimensions:
Aluminium support track, plastic hooks
358 x 56 x 43 mm (W x D x H)
Finish
Chrome, polished/black
Aluminium, matt/black
Cat. No.
807.54.233
807.54.933
Packing: 1 piece
Belt rack, for 6 belts
• Material:
• Dimensions:
358 x 56 x 43 mm (W x D x H)
Finish
Cat. No.
807.54.231
807.54.931
Tie rack, for 20 ties
Packing: 1 piece
Scarf rack, for 6 scarfs
• Material:
• Dimensions:
358 x 61 x 43 mm (W x D x H)
Finish
Cat. No.
807.54.234
807.54.934
Packing: 1 piece
• Material:
• Dimensions:
343 x 47 x 43 mm (W x D x H)
Finish
Cat. No.
807.54.235
807.54.935
Packing: 1 piece
Trouser rack, pull-out with full extension slides
• Material:
Aluminium trouser rack,
steel wire trouser hangers
354 x 58 mm (D x H)
• Dimensions:
Width mm
No. of hangers Finish
supplied
Cat. No.
457
12
610
18
762
24
805.58.231
805.58.931
805.58.233
805.58.933
805.58.235
805.58.935
Chrome, polished
Aluminium, matt
Chrome, polished
Aluminium, matt
Chrome, polished
Aluminium, matt
Smart Wardrobes
Wall hook, fixed with 4 hooks
Packing: 1 piece
Cat. No.
805.58.330
805.58.331
Spare hangers, pack of 18
Garment clips
Optional garment clip attaches
to hangers for skirts, trousers etc.
www.hafele.com
29
Smart Spaces
Wireware
Pull-out storage basket system
308
180
468
45
350
678
min. 515
44
• Material:
Steel
Note
The internal installation width is:
With runner support 768 mm, With runner 703 – 709 mm
Runner
Runner supports with support frame
35
330
Smart Wardrobes
• Finish:
• Type of pull-out:
Supporting pull-out basket or shoe rack
in carcase without runner supports
Galvanised
Single or full extension
Type of pull-out
Single extension
Full extension
Cat. No.
540.24.903
540.24.912
• Finish:
• Type of closing:
• Dimensions:
• Version:
Cat. No.
805.53.206
Packing: 1 pair
Packing: 1 set
Shoe rack
Pull-out basket
703–709
• Finish:
• Dimensions:
680 x 500 x 160 mm (W x D x H)
• Finish:
• Dimensions:
Packing: 1 piece
www.hafele.com
680 x 500 x 110 mm (W x D x H)
Cat. No.
805.54.212
Cat. No.
805.54.203
30
Supporting shoe rack and pull-out basket
Polished chrome-plated frame, galvanised
runners
Self-closing
65 x 495 x 475 mm (W x D x H)
With ball cage runners
Packing: 1 piece
485–700
Smart Spaces
Wireware
Wire basket pull-outs
•
•
•
Supplied with
Basket
Runners
Nuts and bolts
Ordering information
Spacers for hinged door application must be ordered separately
External carcase
width mm
Height
mm
400
450
Internal mounting
width mm
Runner
length
16 mm side panel 18 mm side panel mm
*
*
Width
mm
Depth
mm
105
350 + 18
350 + 14
500
325
525
541.74.700
170
350 + 18
350 + 14
500
325
525
541.74.710
235
350 + 18
350 + 14
500
325
525
541.74.720
105
400 + 18
400 + 14
400
375
425
541.74.702
500
375
525
541.74.704
400
375
425
541.74.712
500
375
525
541.74.714
400
375
425
541.74.722
500
375
525
541.74.724
170
400 + 18
235
500
600
400 + 14
400 + 18
400 + 14
Basket
dimensions
Cat. No.
105
450 + 18
450 + 14
350
425
375
541.74.703
170
450 + 18
450 + 14
350
425
375
541.74.713
235
450 + 18
450 + 14
350
425
375
541.74.723
105
550 + 18
550 + 14
350
525
325
541.74.701
375
541.74.705
325
541.74.711
375
541.74.715
325
541.74.721
375
541.74.725
170
550 + 18
235
550 + 14
550 + 18
550 + 14
350
350
525
525
Packing: 1 set
Spacers for hinged doors
Ø5
For adequate clearance for the projecting
door hinges on the hinge side of the cabinet
• Material:
Plastic
• Colour:
White
• Total spacer thickness not to exceed 21 mm
Ø 5.4
Ø 20.5
8
4
3
5
9
Cap thickness mm
4
3
5
9
Smart Wardrobes
•
Internal mounting for hinged door
cabinets, For use with drawer runners,
For external carcase widths 400 mm,
450 mm, 500 mm and 600 mm
Material:
Wire basket with steel rim and mounting
holes on four sides
Finish:
White powder-coated
Load capacity:
20 kg
Side panel allowances*: 16 mm: + 18 (9 mm + 9 mm spaces)
18 mm: + 14 (5 mm + 9 mm spaces)
Cat. No.
037.93.708
037.93.717
037.93.726
037.93.735
www.hafele.com
31
Smart Spaces
Wireware
Wire basket pull-outs
Wire basket
For carcase
width mm
Depth mm
Height mm Finish
Cat. No.
400
500
150
500
500
150
600
500
150
400
500
325
500
500
325
600
500
325
540.19.711
540.19.911
540.19.712
540.19.912
540.19.713
540.19.913
540.19.731
540.19.931
540.19.732
540.19.932
540.19.733
540.19.933
White
Silver
White
Silver
White
Silver
White
Silver
White
Silver
White
Silver
Packing: 1 piece
Wire shelf
• For side panel thickness:
• Mounting:
For external carcase width mm
Dimensions
(W x D x H) mm
Cat. No.
600
557 x 260 x 30
557 x 445 x 30
757 x 260 x 30
757 x 445 x 30
857 x 260 x 30
857 x 445 x 30
1157 x 260 x 30
1157 x 445 x 30
545.71.203
545.71.213
545.71.204
545.71.214
545.71.205
545.71.215
545.71.207
545.71.217
800
900
Smart Wardrobes
1200
32
Steel wire shelf, plastic shelf support
Chrome-plated shelf, transparent
shelf supports
16 or 19 mm, compensation possible
by rotating the shelf support
Screw fixing to side panel
Packing: 2 pieces
www.hafele.com
• Material:
• Finish:
Smart Spaces
Beech Storage Options
Timber storage baskets
• Material:
• Finish:
Plastic basket, beech frame
White translucent or silver coloured
Finish
For carcase
width mm
Dimensions
(W x D x H) mm
Cat. No.
White
450
500
600
450
500
600
370 x 455 x 202
420 x 455 x 202
520 x 455 x 202
370 x 455 x 202
420 x 455 x 202
520 x 455 x 202
540.57.715
540.57.716
540.57.718
540.57.515
540.57.516
540.57.518
Silver
Packing: 1 piece
Storage basket
Storage basket
• Material:
Natural wicker basket with beech frame
For cabinet widths 400, 500 or 600 mm
For carcase
width mm
Dimensions
(W x D x H) mm
Cat. No.
400
500
600
320 x 455 x 200
420 x 455 x 200
520 x 455 x 200
540.57.001
540.57.002
540.57.003
Packing: 1 piece
Beech runners
• Mounting:
Beech
For use with storage baskets and
chopping board
For side panel thickness 15/16mm or
18/19 mm
Screw fixed to side panel
Side panel thickness mm
15/16
18/19
Cat. No.
540.57.991
540.57.992
Packing: 1 piece
Stacking boxes
• Material:
• Finish:
Solid wood
Beech, clear lacquered
Dimensions (W x D x H) mm
300 x 400 x 140
300 x 400 x 210
Cat. No.
557.04.300
557.04.330
Smart Wardrobes
• Material:
Packing: 1 piece
www.hafele.com
33
Smart Spaces
Drawer Systems
FUNKTION single sided drawer system
•
•
•
•
•
Material:
Finish:
Height:
Load capacity:
Features:
Steel drawer side panels
White, powder-coated
86, 118, 150, 214 mm
30 kg
Single extension
Self-closing feature
Flexible 2-dimensional front adjustment
Smooth rolling mechanism
Double out-stop safety feature
Locked-in position when extended
Drawer length mm
Extension length mm
Height 86 mm
Cat. No.
Height 118 mm
Cat. No.
Height 150 mm
Cat. No.
Height 214 mm
Cat. No.
270
350
400
450
500
550
185
265
315
355
398
440
554.71.721
554.71.723
554.71.724
554.71.725
554.71.726
554.71.727
554.72.723
554.72.724
554.72.725
554.72.726
554.72.727
554.73.723
554.73.724
554.73.725
554.73.726
554.73.727
554.74.704
554.74.705
554.74.706
Set Includes
Cabinet members left and right
Drawer sides left and right
Front fixing brackets
Gallery railing set
Smart Wardrobes
Adjustable railing left and right
• Material:
• Finish:
Steel
Nickel-plated
Drawer length mm
Cat. No.
400
554.76.704
Cat. No.
450
554.76.705
Screw-in
554.76.001
Knock-in
Expanding dowel
554.76.003
554.76.005
500
550
554.76.706
554.76.707
Packing: 1 pair
Packing: 20 sets
Set Includes
Railing back fixing brackets left and right
Cut-to-size rails
Front fixing brackets - clip-on fixing
• Material:
• Finish:
Cover caps, plastic
Zinc
Nickel-plated
For covering front fixing brackets
Cat. No.
Screw-in
554.76.080
Knock-in
Expanding dowel
554.76.083
554.76.086
Colour
Cat. No.
White
554.76.090
Packing: 1 pair
Packing: 1 pair
34
www.hafele.com
Dimensions in mm Dim ensionaldata notbinding.W e reserve the rightto alterspecifications w ithoutnotice.
Single extension
Smart Spaces
Drawer Systems
FUNKTION drawer system
Single extension installation and cutting dimensions
Height 214 mm
For press-in-front fixing
brackets to pre-drill
Ø10mm x 12mm
15.5
Height 150mm
64
64
min. 214
73
132
207
64
145
150
112
38
8.5
Bottom panel
width + 14mm
214
73
min. 80
64
64
64
min. 80
15.5
40.5
118
min. 118
64
78
10
86
64
min. 80
Front overlay
+1.0
-1.0
15.5
15.5
Bottom panel 8.5
width + 14mm
15.5
min. 150
+1.0
-1.0
15.5
+1.0
-1.0
min. 80
15.5
min. 86
Ø10mm x 12mm
Ø10mm x 12mm
15.5
Ø10mm x 12mm
Height 118mm
Height 86mm
+1.0
-1.0
Front overlay
Bottom panel 8.5
width + 14mm
Front overlay
8.5
Front installation dimensions
Front overlay
Bottom panel
width + 14mm
Back installation dimensions
32
32
215
32
32
32
18.5
Cabinet profile fixing positions
Drilling pattern for cabinet member
Cutting dimensions for 16 mm chipboard
Back panel dimensions
Width = Internal cabinet width 31 mm
Height
Standard
86 mm = 72 mm
118 mm = 104 mm
150 mm = 136 mm
Railing System
86 mm = 136 mm
118 mm = 168 mm
149 mm = 200 mm
For Ø4.0 mm HOSPA
countersunk screws or
Ø5.0 mm VARIANTA screws
Drilling dimension of bottom panel
for plug-in drawer sides
Smart Wardrobes
For Ø3.5 mm HOSPA
countersunk screws
Front edge of cabinet
18.5
32
18.5
32
32
183
151
32
32
32
32
Height 150 mm
9
Height 118 mm
9
Height 86 mm
9
Front
edge
Bottom panel dimensions
Width = Internal cabinet width 31 mm
Length (Wooden back) = Drawer length - 2 mm
Length (Steel back) = Drawer length - 12 mm
www.hafele.com
35
Smart Spaces
Drawer Systems
STUDIO DWD XP double sided drawer system
Full extension
• Load capacity:
• Finish:
• Includes:
Drawer Sets, 86 mm High
Drawer component sets for self
assembly to preferred cabinet dimension
40, 60 and 80 kg ordering options
Stainless steel, alu-metallic and white
All required drwer components,
excluding drawer base and back
Drawer Sets, 182 mm High
A
E
D
B
B
C
C
Scope of Supply
Scope of Supply
Smart Wardrobes
1 Pair A
1 Pair B
1 Pair C
1 Pair D
Back brackets 86 mm high
Drawer sides
Drawer front fixing, expanding dowel
Full extension dynamic drawer runners with
integrated Soft-Close®
Drawer Depth mm
Back brackets 182 mm high
Drawer sides
Drawer front fixing, expanding dowel
Full extension dynamic drawer runners with
integrated Soft-Close®
1 Pair E Gallery rails screw-on fixing
Cat. No.
Cat. No.
Stainless Steel Alu-Metallic
Cat. No.
White
Drawer Depth mm
559.75.000
559.75.900
559.75.760
Load Capacity 40kg
350
400
559.75.002
559.75.902
559.75.762
559.75.003
559.75.903
559.75.763
450
559.75.004
559.75.904
500
559.75.005
550
559.75.006
Load Capacity 40kg
275
Cat. No.
Cat. No.
Stainless Steel Alu-Metallic
Cat. No.
White
350
559.76.002
559.76.902
559.76.762
400
559.76.003
559.76.903
559.76.763
559.75.764
450
559.76.004
559.76.904
559.76.764
559.75.905
559.75.765
500
559.76.005
559.76.905
559.76.765
559.75.906
559.75.766
550
559.76.006
559.76.906
559.76.766
Load Capacity 60kg
Load Capacity 60kg
500
559.75.015
550
559.75.016
559.75.915
559.75.916
559.75.775
500
559.76.015
559.76.915
559.76.775
559.75.776
550
559.76.016
559.76.916
559.76.776
559.76.017
559.76.917
559.76.018
559.76.918
600
559.75.017
559.75.917
600
650
559.75.018
559.75.918
650
Load Capacity 80kg
Load Capacity 80kg
500
550
559.75.020
559.75.023
559.75.925
559.75.926
559.75.785
500
559.76.025
559.76.925
559.76.785
559.75.786
550
559.76.026
559.76.926
559.76.786
559.76.027
559.76.927
559.76.028
559.76.928
600
559.75.024
559.75.927
600
650
559.75.025
559.75.928
650
Packing: 1 set
Packing: 1 set
36
1 Pair A
1 Pair B
1 Pair C
1 Pair D
www.hafele.com
D
Smart Spaces
Drawer Systems
STUDIO drawer system
Full extension with soft-close, drilling dimensions
Mounting positions
Based on 16 mm particle board
Inside cabinet width = LW
32
Ø 3,5 x 15
Wood
screw
68
min. 49
Drawer back width = LW - 74
16
Insert front holder into drawer.
Drawer front snaps shut automatically and is fixed.
31
40
Drawer Front Demounting
Bottom
overlay
min. 55
Ø 10 x 12
for dowels
21.5
Bottom width = LW - 74
Drawer Front Mounting
Side
overlay
Drilling Dimension
2 mm set back
275
Drawer front can be removed.
Loosen bottom/front connector if used.
350
400
Side Adjustment
450
500
550
37
2 mm set back
224
400
450
500
600
Turn screw (A).
Due to integrated side adjustment only right side has to be adjusted.
Smart Wardrobes
550
650
37
224
Height Adjustment
352
2 mm set back
500
550
600
2 mm set back
650
224
352
128
37
9
96
9
64
9
18
9 14 9
10
9
128
R
Heavy duty profile
28
37
Loosen fixing screw, adjust drawer front from concentric cam screw
and tighten screw again.
Manufacturing note:
Base and timber back width = Internal carcase width - 74 mm
Drawer base thickness = 16 mm
www.hafele.com
37
Smart Spaces
Wardrobe Lifts
Wall fixing, load capacity 5 kg
OTTO Wardrobe lift
Wall fixing, load capacity 5 kg
600
820
300
• Material:
• Finish:
Steel mounting plate, arm, clothes rail
Ø20 mm and pull rod, plastic housing and
connecting parts
Nickel-plated arm and clothes rail,
housing, connecting parts and pull rod,
black
Cat. No.
805.28.310
Packing: 1 piece
Load capacity 8 kg
650–1150
650
820
885
300
98
• Material:
Steel arm and mounting plate,
plastic housing and arm cover
White aluminium arm, grey housing and arm
cover, red pull rope
• Finish:
• Finish:
• Adjusting range:
Cat. No.
805.28.900
Packing: 1 piece
Steel arm and clothes rail,
aluminium mounting plate, plastic housing,
connecting parts and pull rod
White aluminium arm and clothes rail,
grey housing, connecting parts and pull rod
Clothes rail 650 – 1,150 mm
Cat. No.
805.28.320
Packing: 1 piece
INNOMINATO Wardrobe lift
Smart Wardrobes
Load capacity 8 kg
620–950
820
300
• Material:
• Finish:
• Adjusting range:
Arm
White aluminium
Nickel-plated
plastic mounting plate, housing,
White aluminium or nickel-plated arm and
clothes rail, grey or black housing,
Clothes rail 620 – 950 mm
Housing/pull rod
Grey
Black
Cat. No.
805.29.901
805.29.300
Packing: 1 piece
38
www.hafele.com
• Material:
Smart Spaces
Wardrobe Lifts
PROFESSIONAL Wardrobe lift
•
•
•
•
Area of application:
Load capacity:
Clothes rail Ø:
Material:
• Finish:
• Installation:
For internal wardrobe width 870 - 1,190 mm
Min. 5.0 kg - Max. 15.0 kg
28 mm
plastic housing and connecting parts
Arm and clothes rail nickel-plated,
black housing and connecting parts
Screw fixing to side panel in 32 mm series
drilled holes
Cat. No.
805.24.330
Packing: 1 set
Supplied with
Fixing material
30
Fixing to side panel, load capacity 15 kg
30
30
890
400
140
280
825
1380
Economy drop down wardrobe fitting
With tension adjustment
•
•
•
•
Load capacity:
Clothes rail Ø:
Material:
• Finish:
For internal wardrobe width 890 -1210 mm
10 - 20 kg
28 mm
Arm and clothes rail nickel-plated,
black housing and connecting parts
Cat. No.
805.31.203
Smart Wardrobes
870–1190
Packing: 1 set
Supplied with
Fixing material
www.hafele.com
39
Smart Spaces
Wardrobe Lifts
ONLY Wardrobe lift, for load of 12 kg
2000 Wardrobe lift, for load of 10 kg
• Load capacity:
• Material:
• Clothes rail Ø:
• Material:
• Installation:
30
907
For internal wardrobe width 600 - 1190 mm
or with small mounting plate for side
components of NEW BASIC wardrobe
system pg 50
22.4 mm
Steel clothes rail, plastic mounting plate
and arm
Screw fixing to wardrobe side panel in
32 mm series drilled holes or for sliding into NEW BASIC side component
950
30
140
240
340
907
700
700
810
140
Installation in rear row of holes
180
520
810
With large mounting plate
Smart Wardrobes
Note
Tilting device
780
Mounting plate
Silver
Grey
Nickel-plated
Black
Black
Black
Silver
Grey
Nickel-plated
Black
Black
Black
Silver
Grey
Nickel-plated
Black
Black
Black
Packing: 1 Set
With small mounting plate
Colour arm
mounting plate
Large
Silver
Grey
Nickel-plated
Black
Large
Silver
Grey
Nickel-plated
Black
Small
Nickel-plated
Black
Only use tilting device if
the wardrobe lift is fitted
in the rear row of holes.
Finish
Colour
Arm, clothes rail, pull rod Housing, connecting parts
Finish
clothes rail
Cat. No.
Cat. No.
805.21.911
805.21.310
805.21.901
805.21.300
805.21.320
Packing: 1 piece
Spacer plate, For ONLY wardrobe lift
805.20.525
805.20.324
805.20.424
805.20.532
805.20.331
805.20.431
805.20.557
805.20.355
805.20.455
Installation
• Distance:
• Material:
Colour
Grey
Black
Compensating for door offset,
15 mm
Plastic
Cat. No.
805.20.971
805.20.370
Packing: 2 pieces
40
www.hafele.com
• Installation:
For internal wardrobe width 450 - 1,200 mm
or for side components of NEW BASIC
wardrobe system pg 50
Minimum 1.6 - 10.0 kg
Steel arm, clothes rail and pull rod,
Screw fixing to side panel or sliding into
NEW BASIC side component
Smart Spaces
Wardrobe Accessories
•
•
•
•
Version:
Fixing:
Finish:
Dimensions:
With single extension runners
Side mounting / reversible
Mirror
45 x 445 x 1450 mm (W x D x H)
Runner depth: 400 mm
Mirror size: 300 x 1400 mm (W x H)
Cat. No.
563.40.341
Packing: 1 piece
Pivot pull-out mirror slides out from the cupboard and pivots
Pivot sliding mirror
Jewellery storage
Jewellery inserts, stackable
• Material:
• Finish:
• Dimensions:
Solid wood
Beech, black flocked
300 x 227 x 32 mm (W x D x H)
Cat. No.
811.08.300
Jewellery insert
Packing: 1 piece
Cat. No.
811.08.301
With 3 grooves
Packing: 1 piece
Cat. No.
811.08.302
With 7 grooves
Cat. No.
811.08.303
With 3 storage sections
Packing: 1 piece
Smart Wardrobes
Packing: 1 piece
Lid for jewellery inserts
• Material:
• Finish:
• Dimensions:
Lids: Solid wood, Handle: Aluminium
Lids: Beech
Handle: Silver coloured anodised
300 x 227 x 5 mm (W x D x H)
Cat. No.
811.08.309
Packing: 1 piece
www.hafele.com
41
Smart Shelving Systems
42
www.hafele.com
Smart Wardrobes
Smart Spaces
Smart Spaces
Logo Shelving System
Installation Options
The column profiles can be mounted in three different ways:
Smart Wardrobes
• The “LOGO” system is an attractive and optimal storage solution for the
living room, office, wardrobe, dining room etc.
• It also functions as a moveable storage area or room divider.
• Simple mounting and installation makes the system ideal.
• Variable uses are available with different brackets and adaptors.
• Many different looks are possible with the use of different materials, such as
aluminium, timber and glass.
Single profile fixed between
ceiling and floor
Mounted to wall with corner
connector
Top mounted to an angled
wall
Three profiles fixed together to create
a frame
www.hafele.com
43
Smart Spaces
Carcases and shelves can be mounted between the column profiles
Mounting of timber and glass shelves
Mounting of carcases
Mounting of aluminium shelves
44
Shelf bracket
Aluminium shelf with lip
Aluminium shelf without lip
Depth 180 mm
Depth 180 mm
Depth 180 mm
Depth 340 mm
Depth 340 mm
Depth 340 mm
Depth 340 mm
Depth 500 mm
Depth 500 mm
Depth 500 mm
Depth 500 mm
www.hafele.com
Aluminium shelf end profile for
timber or glass inserts
Smart Wardrobes
Installation of aluminium shelves
Smart Spaces
Components
• Finish:
• Material:
Silver colour anodised
Aluminium
Cat. No.
814.00.930
Length mm
3000
Packing: 1 piece
Cover profile
• Material:
• Finish:
• Application:
Plastic
Grey
For use with 814.00.930
Profile column
Cat. No.
814.01.908
Length mm
3000
Packing: 1 piece
Corner connector
• Installation:
• Material:
• Finish:
Slide into profile column and use m4 grub
screws to lock in place
Aluminium
Grey
Cat. No.
814.01.920
Packing: 1 piece
Ceiling and wall fastener
• Material:
• Finish:
Zinc, die-cast
Powder-coated, silver colour
Cat. No.
814.01.900
Packing: 1 piece
www.hafele.com
Smart Wardrobes
Supplied with
Fixing material
45
Smart Spaces
Components
90°
26
58
28
90°
Adjustable angle top support
• Material:
• Finish:
Zinc, die-cast
Plastic, silver coated
58
Cat. No.
814.01.901
Packing: 1 piece
56
4.5
36
Adjustable foot
• Material:
• Finish:
• Usage:
Zinc, die-cast
For adjusting the height of the profile
up to 30 mm
Cat. No.
814.01.910
Packing: 1 piece
Plate for adjustable foot
• Material:
• Finish:
Cat. No.
814.01.911
Smart Wardrobes
46
Zinc, die-cast
Plastic, silver coated
Packing: 1 piece
Supplied with
Fixing material
www.hafele.com
Supplied with
Fixing material
Smart Spaces
• Material:
• Finish:
• Mounting:
Zinc, die-cast
Powder coated silver colour
To mount in profile
Shelf bracket
For aluminium-timber/glass and aluminium shelves
• Max. load:
• Adjustability:
20 kg
-30°
Shelf brackets
Cat. No.
Shelf depth mm
180
340
500
814.01.931
814.01.932
814.01.933
Packing: 1 piece
Shelf bracket
For timber shelves, carcases or glass shelves
• Max. load:
• Adjustability:
50 kg
-30°
Cat. No.
Smart Wardrobes
814.01.930
Packing: 1 piece
Glass shelf support
• Material:
• Finish:
• Mounting:
Zinc, die-cast
Plastic, coated silver
For clamping glass with 814.01.930
Cat. No.
814.01.980
Packing: 1 piece
www.hafele.com
47
Smart Spaces
Carcase brackets
Carcase bracket for light weight cabinets
• Finish:
• Material:
Silver, plastic coated
Zinc, die-cast
Cat. No.
q4.5
814.01.981
Packing: 1 piece
Carcase bracket, for timber carcase
• Load capacity:
• Includes:
• Mounting:
100 kg for use with 814.01.930
Countersunk m6 screws for fixing to carcase
For fixing into profile above bracket, screwfixing
Cat. No.
814.01.940
Packing: 1 piece
Note
Each carcase requires two shelf brackets and two carcase brackets
Adaptors for LOGO shelving system
• Use:
• Material:
• Finish:
• Mounting:
Width mm
30
For use with the LOGO shelving system
Aluminium
Silver coloured
Screw fixing to profile
Depth mm
450
Height mm
50
Cat. No.
814.01.961
Packing: 1 piece
Smart Wardrobes
Supplied with
Fixing material
Note
Hanging fittings and LOGO profile not included,
please order separately.
For pull-out tie and belt rack
• Use:
• Material:
• Finish:
• Mounting:
Width mm
30
For use with the LOGO shelving system
Aluminium
Silver coloured
Screw fixing to profile
Depth mm
450
Height mm
50
Cat. No.
814.01.962
Packing: 1 piece
Note
Pull-out tie and belt rack and LOGO profile not included,
please order separately.
48
www.hafele.com
For telescopic hanging frame
Smart Spaces
Components
• Material:
• Finish:
• Mounting:
Aluminium
For fixing into profile and the mounting of
accessories
Cat. No.
814.01.960
Packing: 1 piece
Adaptor for wardrobe lifts
• Material:
• Finish:
• Mounting:
Adaptor, for wardrobe accessories
Aluminium
accessories
Cat. No.
814.01.970
Packing: 1 piece
Wall fixing bracket for wardrobe rail
• Material:
• Finish:
• Mounting:
Zinc, die-cast
wardrobe rails
15
Cat. No.
814.01.950
Wardrobe rail, silver with fluted design
1.5
• Material:
• Finish:
• Height:
Aluminium
Silver, anodised
30 mm
Cat. No.
801.08.903
Material thickness mm
1.5
30
Smart Wardrobes
Packing: 1 piece
Packing: 1 piece (3.6 metre length)
15
www.hafele.com
49
Smart Spaces
Aluminium shelving profile
• Material:
• Finish:
• Dimensions:
Aluminium
928 x 10 mm (L x W)
Aluminium shelf types
Depth
mm
End profile
with lip
End profile
with groove
End profile
for inserts
Mid profile with
groove and clip
End profile
with clip
Shelf, with lip
180
340
500
180
340
500
340
500
1 piece
1 piece
1 piece
–
–
–
–
–
–
–
–
1 piece
1 piece
1 piece
–
–
–
–
–
–
–
–
2 pieces
2 pieces
–
1 piece
2 pieces
–
1 piece
2 pieces
–
–
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
–
–
Shelf, without lip
Shelf for inserts
End profile with groove
Cat. No.
End profile, with lip
814.02.920
Packing: 1 piece
10
85
With lip
Smart Wardrobes
End profile without groove
Cat. No.
End profile, without lip
814.02.900
Packing: 1 piece
10
90
Without lip
End profile with clip
Cat. No.
814.02.910
Packing: 1 piece
50
www.hafele.com
58
Smart Spaces
Aluminium profiles
• Material:
• Finish:
Aluminium
Cat. No.
814.02.930
Packing: 1 piece
End profile for inserts
•
•
•
•
Material:
Finish:
For shelf depths:
Usage:
Aluminium
340 and 500 mm
For inserts made of glass, timber and
other materials
Mid-profile with clip and groove
Cat. No.
814.02.940
Packing: 1 piece
Aluminium frame for glass insert
• Material:
• Finish:
• Width:
Aluminium
Silver, anodised
1000 mm
For tray depth mm
Cat. No.
340
500
814.02.951
814.02.952
Packing: 1 piece
Smart Wardrobes
Note
Glass not included
www.hafele.com
51
Smart Spaces
Economy Shelving System - Continued page 49
Main support profile
Smart Wardrobes
Upper support wall mount
• Dimensions:
Material
Aluminium
300 x 82 x 140 mm (L x W x H)
Finish
Silver coloured, anodised
Cat. No.
814.15.921
Material
Plastic
52
• Dimensions:
Height adjustable 25 mm
Finish
Chrome-plated
www.hafele.com
Material
Aluminium
3000 x 80 x 30 mm (L x W x H)
Finish
Cat. No.
814.15.932
Wardrobe hanger rail
Bottom support foot
• Features:
• Dimensions:
Cat. No.
814.15.911
Material
Aluminium
30 x 15.1 mm (W x H)
Finish
Matt
Cat. No.
814.16.931
Economy Shelving System
Smart Spaces
Economy Shelving System
Side and bottom rail
• Dimensions:
• Dimensions:
Material
Aluminium
120 x 24 x 58 mm (L x W x H)
Finish
Material
Aluminium
38 x 24 x 500 mm (H x W x L)
Finish
Cat. No.
814.16.981
Cat. No.
814.16.910
Side rail
Hanger rail bracket
• Dimensions:
Material
Aluminium
Cat. No.
814.16.420
Slide in profile attachment, for system 32
Material
Aluminium
Cat. No.
814.16.991
38 x 3000 mm (H x L)
16 x 4.5 x 40 mm (L x W x H)
Finish
Cat. No.
814.16.905
Material
Aluminium
Finish
Cat. No.
814.16.971
Drawer attachment bracket
• Dimensions:
Material
Zinc alloy
Smart Wardrobes
Material
Aluminium
Finish
Back rail
• Dimensions:
• Dimensions:
38 x 500 mm (H x L)
Base mounted shelf bracket
40 x 8 x 45 mm (L x W x H)
Finish
Chrome-plated
Cat. No.
814.16.400
www.hafele.com
53
Smart Spaces
New Basic Wardrobe System
Support with round rail
NEW BASIC Wardrobe system
0
10
• Material:
• Colour:
Steel rail, plastic support
White aluminium
Cat. No.
805.20.992
Packing: 1 piece
Supplied with
2 Supports
1 Rail
Support
298
30
• Material:
• Finish:
Fitting to clothes rails and shelves
Plastic
White aluminium
Cat. No.
805.20.991
Side component
Packing: 2 pieces
265
2000
Smart Wardrobes
Shelf
With wall fixing
•
•
•
•
•
Load capacity:
Material:
Finish:
Length:
Installation:
0
10
For fitting to wardrobe lifts, clothes rails
and shelves
12 kg
Aluminium
2000 mm
• Material:
• Colour:
Cat. No.
805.20.990
Steel rail, plastic support and shelf
components
White aluminium clothes rail and support,
transparent shelf component
Cat. No.
805.20.993
Packing: 1 piece
Packing: 1 piece
Supplied with
Fixing material
Supplied with
2 Supports
2 Rails
12 Shelf components
Li ft s
Fo r Wa rdro be
se e Page 40
54
www.hafele.com
ONLY and 2000 wardrobe lifts can be fixed to the side sections of
the NEW BASIC wardrobe system. Other elements of the wardrobe
fittings such as pull-out tie, trouser and belt racks can be combined
with NEW BASIC support elements.
Smart Wardrobes
Smart Spaces
Smart Fittings
www.hafele.com
55
Smart Spaces
Wardrobe Hooks
• Finish:
Height mm
100
150
Depth mm
43
64
Ø Hook mm
20
20
• Finish:
Cat. No.
843.91.911
843.91.912
• Finish:
Aluminium/silver coloured, anodised
Depth mm
41
Height mm
47
Cat. No.
842.20.959
• Finish:
Smart Wardrobes
Ø Hook mm
20
20
Cat. No.
843.91.901
843.91.902
• Finish:
Width mm
19
Depth mm
78
Height mm
56
Cat. No.
842.20.904
Packing: 1 piece
Packing: 1 piece
• Finish:
Aluminium polished
Aluminium polished
Width mm
Depth mm
Height mm
Cat. No.
Width mm
Depth mm
Height mm
Cat. No.
12
19
22
28
30
38
845.00.809*
845.01.806**
42
49
22
25
32
40
845.10.805*
845.11.802*
21
33
40
845.02.803***
60
32
50
845.12.809**
Packing: 1 piece
Packing: 1 piece
• Finish:
Depth mm
93
Width mm
18
Height mm
158
Packing: 1 piece
56
Height mm
100
150
Packing: 1 piece
Packing: 1 piece
Width mm
17
Depth mm
43
64
www.hafele.com
Cat. No.
842.02.906
• Finish:
Width mm
18
Depth mm
35
Height mm
60
Cat. No.
842.01.909
Packing: 1 piece
Aluminium wardrobe hooks
Smart Spaces
Wardrobe Hooks
• Finish:
Width mm
20
Depth mm
50
Height mm
20
Cat. No.
844.61.001
Packing: 1 piece
• Finish:
Height mm
Ø Hook mm
Cat. No.
38
16
844.60.001
58
16
844.60.002
83
16
844.60.003
108
16
844.60.004
Packing: 1 piece
Width mm
53
• Finish:
Aluminium, polished
Depth mm
53
Height mm
55
Cat. No.
846.52.808
Brass/chrome-plated, matt
Depth mm
56
Ø mm
17
Cat. No.
842.49.410
Height mm
85
Cat. No.
842.40.950
• Finish:
Brass/nickel-plated, matt
Depth mm
31
Ø mm
20
Cat. No.
842.49.600
Zinc-alloy, nickel-plated
Depth mm
Width mm
29
19
Depth mm
62
Packing: 1 piece
• Finish:
• Finish:
Widtht mm
62
Steel, aluminium coloured
Smart Wardrobes
• Finish:
Aluminium wardrobe hooks
Height mm
37
• Finish:
Cat. No.
845.01.710*
Depth mm
40
Height mm
60
Ø Rosette mm
50
Cat. No.
842.40.980
Packing: 1 piece
www.hafele.com
57
Smart Spaces
Wardrobe Hooks
• Dimensions:
Stainless steel wardrobe hooks
• Finish:
65 x 52 x 15 mm (H x D x W)
Finish
Cat. No.
Chrome-plated, matt
842.28.450
842.28.250
Packing: 1 piece
• Dimensions:
Ø mm
Cat. No.
51
35
15
25
842.58.000
842.57.000
• Finish:
Finish
Cat. No.
Chrome-plated, matt
842.29.400
842.29.200
Packing: 1 piece
Smart Wardrobes
Length mm
Packing: 1 piece
65 x 52 x 15 mm (H x D x W)
• Dimensions:
Matt, brushed
Matt, brushed
Length mm
Ø mm
Cat. No.
70
100
20
20
842.44.007
842.44.000
Packing: 1 piece
Zinc alloy wardrobe hooks
85 x 54 x 12 mm (H x D x W)
Finish
Cat. No.
Nickel-plated, matt
842.10.650
842.10.250
Height mm
Depth mm
Width mm Finish
Cat. No.
54
50
70
Silver
coloured,
matt
843.62.900
90
46
90
Chromeplated,
polished
843.77.900
58
www.hafele.com
Smart Spaces
Wardrobe Hooks
• Finish:
• Hole distance:
Matt, brushed
32 mm
• Finish:
• Hole distance:
Height mm Depth mm Ø Hook mm Ø Rosette mm Cat. No.
59
10
48
842.33.060
100
• Finish:
• Hole distance:
Matt, brushed
20 mm
Depth mm
52
Width mm
25
• Finish:
• Hole distance:
Cat. No.
842.34.010
Matt, brushed
32 mm
59
10
48
842.34.050
100
Packing: 1 piece
Depth mm
72
Width mm
20
Cat. No.
842.34.000
Packing: 1 piece
Packing: 1 piece
• Finish:
• Hole distance:
Height mm
150
Matt, brushed
20 mm
Smart Wardrobes
67
10
48
842.33.010
215
Packing: 1 piece
Packing: 1 piece
Height mm
110
Matt, brushed
32 mm
Stainless steel wardrobe hooks
• Finish:
• Hole distance:
Height mm
104
Matt, brushed
32 mm
Depth mm
80
Width mm
20
Cat. No.
842.34.020
Packing: 1 piece
www.hafele.com
59
Smart Spaces
Wardrobe Hooks
Smart Wardrobes
• Version:
• Material:
60
Folding hook
Folding hook, projection 47 mm
Housing: Beech
Hook: Zinc alloy
Finish
Cat. No.
Housing: White lacquered
Hook: Chrome-plated, polished
844.26.270
Housing: Black lacquered
Hook: Chrome-plated, polished
844.26.230
Packing: 1 piece
Supplied with
Fixing material
www.hafele.com
Smart Spaces
Wardrobe Hooks
Wardrobe hooks
Wood hooks
• Version:
Folding hook, projection 205 mm
Material
Finish
Cat. No.
Housing: Wood
Hook: Aluminium
Housing: White lacquered
Hook: Polished
844.25.037
Housing: Walnut
Hook: Aluminium
Housing: Clear lacquered
Hook: Polished
844.25.032
Housing: Oak
Hook: Aluminium
Housing: Dark brown
lacquered
Hook: Polished
844.25.034
Packing: 1 piece
Metal hooks
Smart Wardrobes
Supplied with
Fixing material
• Material:
• Clearance:
Stainless steel, quality 1.4305
165 mm
• Material:
• Version:
Stainless steel, quality 1.4305
Rotating
Finish
Cat. No.
Finish
Cat. No.
Matt brushed
844.21.010
Matt brushed
844.28.000
Packing: 1 piece
Packing: 1 piece
Supplied with
Fixing material
Supplied with
Fixing material
www.hafele.com
61
Smart Spaces
Wardrobe Hooks
Zinc alloy hooks
Folding hook
• Version:
• Installation:
With magnet for holding in closed position
M4 thread
• Version:
• Installation:
With magnet for holding in closed position
M4 thread
Finish
Cat. No.
Finish
Cat. No.
Chrome-plated, matt
844.33.400
Nicke-plated, matt
844.33.600
Packing: 1 or 10 pieces
62
• Hole spacing:
• Version:
• Dimensions:
Smart Wardrobes
Chrome-plated hook
32 mm
M4 thread
10 x 42 x 45 mm (W x D x H)
Finish
Chrome-plated, matt
Cat. No.
844.27.200
844.27.400
www.hafele.com
Smart Spaces
Wardrobe Hooks
Brass hooks
35 x 55 x 41 mm (W x D x H)
One sided mounting with M4 hanger bolt
Finish
Cat. No.
Stainless steel coloured
844.42.200
844.42.600
Packing: 1 piece
Supplied with
Fixing material
• Dimensions:
• Mounting:
30 x 44 x 30 mm (W x D x H)
One sided mounting with self-tapping
screw
Finish
Cat. No.
Chrome-plated, matt
842.49.430
842.49.630
842.49.230
• Dimensions:
• Mounting:
Supplied with
Fixing material
• Dimensions:
• Mounting:
55 x 17 x 35 mm (W x D x H)
One sided mounting with M4 hanger bolt
Finish
Cat. No.
Chrome-plated, matt
842.49.440
842.49.640
842.49.240
Smart Wardrobes
Supplied with
Fixing material
www.hafele.com
63
Smart Spaces
Wardrobe Hooks
• Finish:
• Version:
• Fixing:
Rose separate
One sided, via M6 hanger bolt
Depth mm
Hook diameter
mm
Rose diameter
mm
Cat. No.
72
26
30
844.29.000
Glass
With double-sided adhesive foil print
Finish
Black
White
Matt
Diameter mm
15
Cat. No.
844.29.093
844.29.097
844.29.094
• Finish:
• Fixing:
Smart Wardrobes
Diameter
mm
Depth
mm
Cat. No.
40
70
844.30.000
Decorative inset
• Material:
• Version:
Diameter mm
48
• Material:
• Version:
Finish
Black
White
Matt
Glass
Diameter mm
25
Cat. No.
844.30.093
844.30.097
844.30.094
Depth mm
51
Cat. No.
844.31.000
• Finish:
• Fixing:
Diameter mm
48
Depth mm
51
Cat. No.
844.32.000
Decorative inset
• Finish:
• Version:
Glass
Finish
Black
White
Matt
Diameter mm
39
64
• Finish:
• Fixing:
www.hafele.com
Cat. No.
844.31.093
844.31.097
844.31.094
• Finish:
• Version:
Finish
Black
White
Matt
Glass
Diameter mm
20
Cat. No.
844.32.093
844.32.097
844.32.094
Zinc alloy hooks
Smart Spaces
Cabinet Suspension Fitting
Cabinet suspension fitting
33
•
•
•
•
•
min.
17
22
Finish:
Height adjustment:
Depth adjustment:
Side adjustment:
Load bearing capacity:
White plastic housing with steel hook
12 mm
14 mm
4 mm
150 kg per pair
Hand
Left
Right
Cat. No.
290.00.701
290.00.700
Packing: 50 pieces
With hooks, suspension rail or support plate
•
•
•
•
•
30
min.
10
20
Finish:
Height adjustment:
Depth adjustment:
Side adjustment:
White plastic housing with steel hook
16 mm
6 mm
5 mm
150 kg per pair
Hand
Left / Right
Cat. No.
290.00.720
Packing: 100 pieces
Depth adjustment
Upper shelf
28
min.
10
24
Side panel
Rear panel
•
•
•
•
•
Finish:
Height adjustment:
Depth adjustment:
Side adjustment:
White powder-coated steel
16 mm
15 mm
6 mm
200 kg per pair
Height adjustment
Hand
Left
Right
Cat. No.
059.13.833
059.13.824
Wall rail for cabinet hangers
1.75
28
Length
Cat. No.
290.09.901
290.09.920
11
Packing: 2.5 m
8.2
25
Finish
Galvanised steel
White plastic cover
6
2
60
Wall plate for cabinet hangers
Finish
Galvanised steel
48
Smart Wardrobes
Packing: 20 pieces
Cat. No.
290.08.900
6
8
www.hafele.com
65
Smart Spaces
Wardrobe Rail
OVA Wardrobe rail
Steel and
zinc-alloy
nickel-plated
Wardrobe rail, welded
Wardrobe rail with tightly closed seam
1.5
1
30
30
15
15
Smart Wardrobes
•
•
•
•
Material:
Finish:
Material thickness:
Height:
1.0
1.0
1.5
Steel
Chrome-plated
1-1.5 mm
30 mm
Length mm
1500
2500
2500
• Material:
• Finish:
• Height:
Cat. No.
801.13.221
801.13.220
801.09.226
Steel
Chrome-plated
30 mm
Material thickness mm Length mm
1.0
2500
Cat. No.
801.14.701
Packing: 1 piece
Packing: 1 piece
Wardrobe rail white, with fluted design
Wardrobe rail silver, with fluted design
1.5
1.5
30
30
15
15
• Material:
• Finish:
• Height:
Aluminium
White powder-coated
30 mm
1.5
66
www.hafele.com
• Material:
• Finish:
• Height:
Cat. No.
801.08.703
Aluminium
Silver anodised
30 mm
1.5
Cat. No.
801.08.903
Steel zinc-alloy
and plastic
chrome-plated
Smart Spaces
Wardrobe Rail
OVA Wardrobe rail accessories
Rail end supports
11
8
11
20
20
14
• Material:
• Finish:
• Mounting:
Zinc alloy
Nickel-plated
Screw fixing
•
•
•
•
14
Mounting pin Ø:
Material:
Finish:
Mounting:
5 mm
Zinc alloy
Nickel-plated
Screw fixing to side panel with mounting pin
Cat. No.
802.04.208
Cat. No.
803.33.723
Packing: 500 pieces
44
32
45
32
Packing: 500 pieces
M6x 28
45
30
11
63
75
52
32
• Material:
• Finish:
• Mounting:
20
16
Zinc alloy
Nickel-plated
Optional panel attachment
• Material:
• Finish:
• Mounting:
Cat. No.
803.32.721
Zinc alloy
Chrome-plated
Height mm
75
Description
Rail centre support
Cat. No.
802.04.208
Packing: 1 piece
Packing: 200 pieces
Smart Wardrobes
20
8
38
60
23
• Material:
• Mounting:
Plastic
Slides onto wardrobe rail
Colour
Cat. No.
White
803.29.719
Black
803.29.317
Packing: 100 pieces
h ts se
Fo r LED ra il lig
Page 125
e
www.hafele.com
67
Smart Spaces
Wardrobe Rail
Rolled wardrobe rail, with tightly closed seam
• Material thickness:
0.6 mm
Material
Steel
Finish
Nickel-plated
Cat. No.
801.01.701
Packing: 2.5 m
Rail end support, brass
Installation
• Fix rail end supports to side panels
• Slide sleeve onto wardrobe rail
• Insert wardrobe rail into non-threaded rail end support
• Screw sleeve to threaded rail end support
Cat. No.
803.51.702
Finish
Nickel-plated
Packing: 5 or 10 pairs
Supplied with
1 Rail end support without thread
1 Two-piece rail end support with thread
Cat. No.
802.02.220
Finish
Chrome-plated
Wardrobe rail, welded
• Material thickness:
1.2 mm
Finish
Material
Steel, brass coated
Cat. No.
801.11.741
Smart Wardrobes
Packing: 2.5 m
Rail end support, brass
Installation
• Fix rail end supports to side panels
• Slide sleeve onto wardrobe rail
• Insert wardrobe rail into non-threaded rail end support
• Screw sleeve to threaded rail end support
Finish
Cat. No.
803.51.757
Packing: 5 or 10 pairs
Supplied with
1 Rail end support without thread
1 Two-piece rail end support with thread
Finish
Chrome-plated, zinc alloy
Cat. No.
802.02.250
68
www.hafele.com
Smart Spaces
Wardrobe Rail
Support element
With wardrobe rail Ø22 mm
56
840
130
• Material:
Steel wardrobe rail with plastic bracket
Wardrobe rail
colour
Plastic parts
colour
Cat. No.
Aluminium coloured
Nickel-plated
Grey
Black
807.24.901
807.24.300
Packing: 1 set
Smart Wardrobes
300
Note
Installation width can be adjusted by cutting rail to desired length.
www.hafele.com
69
Smart Laundry
70
www.hafele.com
Smart Laundry
Smart Spaces
Smart Spaces
Laundry Baskets
Chrome laundry baskets and fittings
Laundry basket
• Version:
• Finish:
• Height:
With lowered handles for hooking onto
mounting rail
Chrome-plated steel
Rear: 365 mm, Front: 420 mm
Capacity litre
Width mm
For cabinet width 350 mm
29
285
For cabinet width 450 mm
39
385
Depth mm
Cat. No.
260
540.02.202
260
540.02.204
Flap-ex flap fitting
For controlling opening of the door front
Cat. No.
365.52.708
Packing: 1 piece
Smart Laundry
Packing: 1 piece
Mounting rail
• Mounting:
• Width:
• Hole distance:
• Finish:
For fixing laundry basket with screw
mounting to door front
214 mm
160 mm
Chrome-plated steel
Cat. No.
540.02.194
Packing: 1 piece
www.hafele.com
71
Smart Spaces
Laundry Baskets
Synergy Collection Laundry hampers
Pull-out laundry hamper
• Finish:
Width mm
457
762
With full extension slide and removable bags
530 mm from top of frame to bottom of
bag (when bags are loaded, the height will
be greater than specified)
Aluminium satin
No. of bags
1
2
Cat. No.
807.52.931
807.52.933
Packing: 1 piece
Smart Laundry
Tilt-out laundry hamper, with removable bags
•
•
•
•
Mounting:
Material:
Depth:
Height:
Width mm
412
565
714
Frame screw mounts to back of the tilt-out door
Powder coated steel frame, nylon bag
345 mm
600 mm from top of frame to bottom of
bag (when bags are loaded the height will
be greater than specified)
No. of bags
1
2
2
Finish
Black
Black
Black
Cat. No.
547.43.301
547.43.303
547.43.305
Packing: 1 piece
72
www.hafele.com
• Version:
• Height:
Smart Spaces
Ironing Boards
IRONFIX Ironing boards
• Board length:
• Finish:
950 mm when opened
White powder coated steel with striped
fabric ironing board cover
Dimensions
326 x 252 mm (W x H)
Cat. No.
568.66.710
Drawer mounted
• Board length:
• Features:
• Finish:
950 mm when opened
Variable width adjustment for built-in widths
between 362 and 500 mm, automatic
extending support when drawer is opened
Wall mounted
Cat. No.
568.60.710
Lateral
• Board length:
• Finish:
950 mm when opened
Dimensions
520 x 350 x 125 mm (W x D x H)
Cat. No.
568.60.780
Accessories
Natural white cotton with grey stripes, foam
backing. With rubber clamping and elastic
tensioning cord
Description
Ironing board cover
• Application:
• Material:
Cat. No.
568.60.907
For hanging onto the mounting bracket on
IRONFIX ironing boards
backing
Description
Sleeve ironing board arm
• Application:
• Material:
Cat. No.
568.61.700
For IRONFIX sleeve ironing board arm.
backing. With rubber clamping and elastic
tensioning cord
Description
Shirt sleeve ironing board cover
Smart Laundry
• Material:
www.hafele.com
Cat. No.
568.60.916
73
Smart Spaces
Step Stools
Step stools
Step stool with safety rail
• Material:
• Finish:
Step stool
Aluminium and steel
Polished aluminium and black
Cat. No.
2 step version
3 step version
505.04.002
505.04.003
Packing: 1 piece
Accessories
Folding bracket
White powder-coated steel and grey
plastic caps on all contact points
• Mounting:
Cat. No.
505.07.702
• Finish:
For attaching to folding steps
(505.04.942) only
For mounting to a removable kickboard
Bright galvanised steel
Packing: 1 piece
Cat. No.
505.04.998
Folding steps
Smart Laundry
Packing: 1 piece
Hanging bracket
• Mounting:
• Finish:
White powder-coated steel and grey
plastic caps on all contact points
200 x 300 mm steps and non-slip rubber tread
• Dimensions:
Cat. No.
505.04.942
Packing: 1 piece
74
www.hafele.com
• Dimensions:
• Finish:
For screw mounting inside a cabinet
For storage of folding steps
(505.04.704 as above only)
140 x 30 x 30 mm (W x D x H)
Cat. No.
505.04.722
Packing: 1 piece
• Finish:
Smart Spaces
Wireware
Basket and accessory holders
Hook-in basket
Chrome-plated steel
Width mm
Depth mm
Height mm
Cat. No.
300
300
400
400
75
200
75
200
72
72
72
72
520.81.213
520.81.222
520.81.231
520.81.240
Packing: 1 piece
Hose holder
• Finish:
Chrome-plated steel
Width mm
Depth mm
Height mm
Cat. No.
300
75
224
520.82.201
• Finish:
Packing: 1 piece
Tube and nozzle holder
• Finish:
Chrome-plated steel
Width mm
Depth mm
Height mm
Cat. No.
300
60
190
520.82.210
Packing: 1 piece
Dustpan and brush holder
• Finish:
Chrome-plated steel
Width mm
Depth mm
Height mm
Cat. No.
400
115
160
520.82.240
Packing: 1 piece
Hook rail - screw on
Chrome-plated steel
No. of hooks Width mm Depth mm
Height mm
Cat. No.
4
5
33
33
520.82.229
520.82.238
300
400
52
52
Packing: 1 piece
Roll holder - screw on
• Finish:
• Mounting:
Chrome-plated steel
Screwed to underside of overhead cabinet
Width mm
Depth mm
Height mm
Cat. No.
300
135
165
521.06.206
Smart Laundry
• Finish:
Packing: 1 piece
Hook-in rail
• Finish:
• Mounting:
Powder-coated silver
Screw fixing with 300 or 400 mm spacing
Length mm
Cat. No.
1500
520.80.207
Packing: 1 piece
www.hafele.com
75
Smart Spaces
Wireware
Hanging laundry accessories
Hook rail - under mount
• Mounting:
For screw mounting on walls
With 5 hooks
Polished chrome-plated steel wire
• Finish:
• Mounting:
For screw mounting under shelves
With 5 hooks
Polished chrome-plated steel wire
• Finish:
Width mm
Depth mm
Height mm
Cat. No.
Width mm
Depth mm
Height mm
Cat. No.
350
30
50
520.04.207
350
30
50
520.04.252
Packing: 1 piece
Packing: 1 piece
Broomstick holder
Broom holder
• Mounting:
For concealed screw mounting
With 5 holders
White plastic housing, rubber-coated
nickel-plated steel hooks
• Finish:
Width mm
Depth mm
Height mm
Cat. No.
318
27
75
520.44.700
Packing: 1 piece
• Mounting:
For screw mounting. For broomsticks
between 23-28 mm thick
Galvanised spring steel and rubber rollers
• Finish:
Width mm
Depth mm
Height mm
Cat. No.
51
40
50
520.10.009
Packing: 1 piece
Hook rail - wall mount
Smart Laundry
Broomstick holder
76
• Mounting:
• Finish:
For screw mounting
White plastic
Size Ø mm
Cat. No.
80
520.11.202
Packing: 1 piece
www.hafele.com
Smart Spaces
Wireware
Hanging laundry accessories
All purpose basket
With screw mounting eyes for surface
mounting
Closed on all sides
• Finish:
• Version:
With 2 screw mounting eyes for surface
mounting
Closed on all sides
• Finish:
• Version:
Width mm
Depth mm
Height mm
Cat. No.
Width mm
Depth mm
Height mm
Cat. No.
340
140
120
540.33.000
340
120
100
540.31.006
Packing: 1 piece
Packing: 1 piece
All purpose basket
All purpose basket
• Mounting:
mounting
Open at back
• Finish:
• Version:
• Mounting:
mounting
Open at back
• Finish:
• Version:
Width mm
Depth mm
Height mm
Cat. No.
Width mm
Depth mm
Height mm
Cat. No.
330
115
110
540.30.705
312
101
112
540.36.207
Packing: 1 piece
Packing: 1 piece
All purpose basket
• Mounting:
• Finish:
• Version:
Smart Laundry
• Mounting:
• Mounting:
All purpose basket
For surface mounting
Closed on all sides with perspex base
Width mm
Depth mm
Height mm
Cat. No.
260
260
63
63
50
90
543.21.210
543.21.229
Packing: 1 piece
www.hafele.com
77
Smart Spaces
Ventilation Systems
• Finish:
• Mounting:
Silver-coloured, aluminium
With smooth flanges, long edges bevelled
for recess mounting, screw into place
With flanged rim for recess mounting,
nailed in place
Width mm
Height mm
Ventilation
Cat. No.
Width mm
Height mm
Ventilation
Cat. No.
400
500
60
60
160 cm²
200 cm²
575.23.921
575.23.930
230
68
42.24 cm²
571.54.248
Packing: 1 piece
Packing: 1 piece
• Finish:
• Mounting:
Silver-coloured, anodised aluminium
Long edges bevelled, press-fitting with
harpoon type mounting flange
• Material:
• Mounting:
White plastic
With flanged rim for recess mounting
Width mm
Height mm
Ventilation
Cat. No.
Width mm
Height mm
Ventilation
Cat. No.
480
240
78
78
78 cm²
36 cm²
575.07.927
575.07.918
227
225
68
120
60 cm²
120 cm²
571.55.343
571.55.352
Packing: 1 piece
Packing: 1 piece
• Finish:
• Mounting:
Smart Laundry
• Material:
• Mounting:
Silver-coloured, aluminium
With smooth flanges, for recess mounting
• Finish:
• Mounting:
With ribbed flanges, long edges bevelled,
for press-fitting
Width mm
Height mm
Ventilation
Cat. No.
Width mm
Height mm
Ventilation
Cat. No.
250
300
78
78
90 cm²
193 cm²
575.13.916
575.13.925
250
300
400
250
300
400
250
300
400
60
60
60
80
80
80
100
100
100
45 cm²
53 cm²
71 cm²
60 cm²
71 cm²
95 cm²
89 cm²
107 cm²
142 cm²
575.20.914
575.20.915
575.20.916
575.20.921
575.20.922
575.20.923
575.20.931
575.20.932
575.20.933
Packing: 1 piece
Packing: 1 piece
• Finish:
• Mounting:
Long edges bevelled, press-fitting with
harpoon type mounting flange
Width mm
Height mm
Ventilation
Cat. No.
250
500
110
110
126 cm²
252 cm²
575.01.916
575.01.925
Packing: 1 piece
78
www.hafele.com
Ventilation grills
Smart Spaces
Ventilation Systems
Grills and ducting sets
• Colour:
Finish
White
System mm
4 - 100
5 - 125
6 - 150
1000
System 5
System 4/6
White ducting kit with either white or
brown external grill
Cat. No.
565.30.710
565.30.712
565.30.714
Packing: 1 set
Set includes
2 Flexi-hose threaded connectors
1 One metre length Flexi-hose
1 Flat round wall plate
1 Wall grill
System 4/5/6
Ducting set, 1 metre
Ducting set, 3 metres
1230
1000
1000
System 5a
System 4/5/6
System 4a
• Colour:
White ducting kit with either white or
brown external grill
Finish
White
System mm
4 to 4a / 100 to 110 x 54
5 to 5a / 125 to 204 x 60
6 to 6a / 150 to 220 x 90
Packing: 1 set
Set includes
2 Flexi-hose threaded connectors
2 One metre length flat duct
1 One metre length Flexi-hose
1 Flat Flexi-hose connector
1 Flat duct connector
1 90º flat duct connector
1 Flat rectangular wall plate
1 Slim airbrick wall outlet or cowled wall vent
www.hafele.com
Cat. No.
565.30.720
565.30.722
565.30.724
Smart Laundry
System 6a
79
Smart Spaces
Sanitation
Liquid soap dispenser
BLANCONAVA tap
• Finish:
• Material:
• Finish:
Chrome
Polished
White
Width mm
Depth mm
Height mm
Cat. No.
75
85
150
565.91.701
Washing lotion
Cat. No.
Suitable for high pressure only
565.68.216
BLANCOJARRAH 6 laundry sink
• Features:
Slightly foaming and gentle wash, suitable
for sensitive skin, PH value 5.5, liquid for
up to 650 portions
For liquid soap dispenser
• Application:
565.91.096
Includes bypass plug
600 mm
240 mm
Cat. No.
Liquid dispenser
565.65.343
Smart Laundry
BLANCOJARRAH 6 laundry sink
• Features:
• Version:
• Cabinet size:
• Bowl depth:
Includes bypass plug
450 mm
240 mm
Releases a precise dose of liquid at the
press of a button, includes liquid volume
display/level indicator
Width mm
Depth mm
Height mm
Cat. No.
75
85
150
565.92.708
Cat. No.
565.65.353
80
www.hafele.com
Cat. No.
• Version:
• Cabinet size:
• Bowl depth:
Smart Bedrooms
Smart Spaces
Smart Bedrooms
www.hafele.com
81
Smart Spaces
Bed Frames and Fittings
•
•
•
•
•
•
Hinge design ensures safe retention of seat top in raised position at an angle of 95°
Guarantees generous degree of forward movement (approx. 110 mm)
Unhindered opening even of fully upholstered seats, as no joint is required between the seat and back
The hinge joints incorporate a stop to prevent the open seat slamming against the fitting
The springs for seat tops weighing 8 and 12 kg counterbalance the weight of the seat top and assist opening
The screw holes in the bench side panel and seat top are at 32 mm intervals
7
Bench seat hinge for lightweight seats, without spring
64
85
10
• Finish:
Steel, yellow chromatised
7
1
31
50
Cat. No.
Ø7
643.01.506
19
64
100
191
Packing: 1 set
Bench seat hinge with spring
40
• Finish:
32
32
Seat top weight kg
Cat. No.
8
12
643.01.515
643.01.524
136
Left-hand hinge, with spring
Packing: 1 set
79
64
Scissor jacks, for adjustable head and foot
For slatted frames, couches and french beds
18 Stages
300
19
20
2.5
25
2.5
235
• Finish:
• Version:
44
With mounting plates
Material
Installation height mm
Cat. No.
Steel
300 - 375 max.
274.00.933
19 Stages
79
64
• Finish:
• Version:
With mounting plates
375
19
255
20
2.5
25
2.5
44
Material
Installation height mm
Cat. No.
Steel
300 - 375 max.
274.01.930
60°
Swing away spring loaded fittings
Lying area
• Finish:
• Version:
max. 70
79
Smart Bedrooms
Packing: 1 set
196
254
Galvanised
With 2 removable tension springs
For side opening beds and beds with
bedding boxes
Bedding box
Material
Steel
For bed size max. mm
1,000 x 2,000
Cat. No.
274.50.915
Packing: 1 set
Swing away super
Lying area
• Version:
36°
Bedding box
140
80
max. 175
For heavy mattresses
With 4 removable tension springs
For end opening couches and beds with
bedding boxes
Material
Steel
Colour
White
For bed size max. mm
1,400 x 2,000
Cat. No.
274.51.921
Packing: 1 set
82
www.hafele.com
Packing: 1 set
Smart Spaces
SANOBASIC NV Slatted mattress frames
• Features:
• Material:
• Framework height:
• Overall height:
• Version:
Size mm (W x L)
890 x 1960
Suitable for latex, foam and spring
core mattresses
28 resilient timber slats, mounted in flexible
rubber seats, with pressure distributing
central belt, with support degree regulation
Framework and slats: laminated wood
seats: rubber
50 mm
70 mm
Without head and foot adjustment
For mattress size mm
900 x 2000
Cat. No.
271.75.004
Packing: 1 piece
• Features:
• Material:
• Framework height:
• Overall height:
• Version:
Size mm (W x L)
1390 X 1960
Suitable for latex, foam and spring
core mattresses
28 resilient wooden slats, mounted in flexible
rubber seats , with pressure distributing
central belt, 5-fold central zone
reinforcement by double borders with
support degree regulation
Framework and slats: laminated wood
seats: rubber
40 mm
50 mm
With head and foot adjustment
For mattress size mm
1400 x 2000
With head and foot adjustment
Without head and foot adjustment
Cat. No.
271.75.007
Packing: 1 piece
SANOMATIC Slatted mattress frame
HYPERFLEX Mattress
A
• Specification:
B
• Material:
• Cover:
• Laminated beech wood frame
• Electronic adjustment for head and foot sections
• 26 resilient wooden slats mounted in flexible rubber seats
with cushioning support
• Optimal spring effect due to central reinforcement
• Support degree regulation, continuously adjustable
• Textile centre strap
• 5 laying zones
• 6 button control (head and foot individually plus head
and foot simultaneously)
• Power line isolation
• Emergency lowering
• LGA quality certificate
Pure cotton linters wool on both sides,
quilted with the cover
HYPERFLEX foam core, cotton drill, elastic
terry cloth cover (76 % cotton, 24% polyester)
Removable (with zipper on 3 sides),
dry-cleanable
• CFC-free
Lying comfort provided by:
• Durable shape
• High elastic durability
• Extremely respiratory active and high moisture transfer foam
padding with natural sponge-like structure
Dimensions mm (W x L x H)
900 x 2000 x 160
1400 x 2000 x 160
Weight kg
14
21
Smart Bedrooms
With wooden frame and resilient wooden slats
Cat. No.
271.65.473
271.65.493
Packing: 1 piece
• Bearing capacity approx:
• For mattress size:
• Size A x B:
120 kg
900 x 2000 mm
890 x 1960 mm
Cat. No.
271.78.505
Packing: 1 piece
www.hafele.com
83
Smart Spaces
Wooden slats, 5 layers
• Material:
• Finish:
• Version:
Birch wood
Wood grain paper coated, lacquered
Rounded edges
53
Length mm
650
764
910
Thickness mm
7
8
8
Bed size
Queen
Queen
Single
Cat. No.
271.63.331
271.63.042
271.63.051
Packing: 10 pieces
Wooden slats, 6 layers
• Material:
• Finish:
• Version:
53
Length mm
730
910
Birch wood
Wood grain paper coated, lacquered
Corrugated, rounded edges
Thickness mm
9
9
Bed size
Queen
Single
Cat. No.
271.63.884
271.63.885
Packing: 10 pieces
Slat pocket flexible, screw fixing
Finish
Plastic, brown
Cat. No.
271.62.116
Packing: 100 pieces
Slat pocket flexible, press fitting
Finish
Plastic, brown
Cat. No.
271.62.125
Connecting sleeve
64
54
22
8
18
• Application:
For laterally connecting two wooden slats
in the central area of the frame. The degree
of support can be adjusted by moving the
sleeves individually.
For use with 53 mm wide wooden slats
Finish
Plastic, green
Cat. No.
271.62.050
Smart Bedrooms
1
Packing: 100 pieces
Pocket slats strip
PVC
• Finish:
• Fixing:
• No. pockets:
Dryflex
PVC, Brown
*Dryflex, brown
Plastic, brown
Staples on wooden frame
16
Cat. No.
271.62.152
271.62.141
Packing: 100 pieces
* Dryflex is a synthetic material with the properties of rubber
12
60
17
84
60
53
2,5
20
www.hafele.com
Packing: 100 pieces
Smart Spaces
Family living bed/desk combo
For beds with width of 900/1400 mm
Mounted fitting for one side
• Material:
• Finish:
• Installation:
Fitting set
Steel
Lacquered, black
For specified furniture design
Version
Combi fitting for desk/bed 900 x 2000 mm (W x L)
Combi fitting for desk/bed 1400 x 2000 mm (W x L)
Width B mm
1050
1503
Height H mm Depth T mm
1447
650
1777
825
Thrust force N
1100
1200
Cat. No.
271.97.300
271.97.301
Smart Bedrooms
• Bed and desk in one place
• Space saving, ideal for use as guest bed in residential areas, students’ hostels, boats, caravans,
hotels, hospitals and public buildings
• No rearranging objects - everything can remain in it’s place
Packing: 1 set
Supplied with
1 Fitting set complete for 1 piece of furniture, without fixing material
1 Set of installation instructions
1 CD with CAD data for furniture design
frames
Fo r m att re ss
M at tres s
& Hype rf le x
se e Page 83
www.hafele.com
85
Smart Spaces
Wood thickness of 20 mm is required for carcase and bedding box construction.
The specified carcase dimensions are internal carcase dimensions.
• Internal carcase height = mattress length + 2 x beddingbox thickness + 125 mm
• Internal carcase width = mattress width + 2 x beddingbox thickness + 54 mm
• The surrounding gap between the carcase and the front panel must be at least 4 mm.
Note: It is essential for foldaway beds to be
secured against tipping according to EN 1129.
Two securing brackets are provided in each
fitting set.
End mounted
For side mounting
For end mounting
165
64
48
11
190
32
BETTLIFT Foldaway bed fitting
40
Installation
• Pay attention to installation drawing and assembly instructions.
• Ensure that the bottom is suitable for attaching the securing brackets.
• Secure foldaway beds with securing brackets to prevent tilting.
Supplied with
1 Pair of foldaway bed fittings with pivot bearings and positioning
bolts for gas filled struts
2 Securing brackets
1 Safety lever with stop plate
1 Set of fixing material
Installation
• Pay attention to installation drawing and assembly instructions.
• Secure foldaway beds with securing brackets to prevent tipping.
Cat. No.
271.95.203
Cat. No.
271.95.201
Packing: 1 set
Smart Bedrooms
Order reference
Order gas filled strut for appropriate bed weight separately.
49
Packing: 1 set
Order reference
Order gas filled strut for appropriate bed weight separately.
Gas filled strut
Gas filled strut
Bed weight
The correct gas filled strut must be selected depending on the weight
of the bed. The weight of the bed is calculated from the total weight
of the bedding box, the slatted frame, the mattress and the bedding.
Bed weight
The correct gas filled strut must be selected depending on the weight
of the bed. The weight of the bed is calculated from the total weight of
the bedding box, the slatted frame, the mattress and the bedding.
Weight of bed kg
50
60
70
80
90
100
Pushing force N
900
1,100
1,300
1,500
1,700
1,900
Cat. No.
271.99.220
271.99.266
271.99.300
271.99.346
271.99.382
271.99.410
Weight of bed kg
40
50
60
70
80
Pushing force N
400
500
600
700
800
Cat. No.
271.99.122
271.99.140
271.99.168
271.99.186
271.99.202
Packing: 1 set
Packing: 1 set
86
www.hafele.com
Supplied with
1 Pair of foldaway bed fittings with pivot bearings and positioning
bolts for gas filled struts
2 Securing brackets
1 Set of fixing material
300
Smart Spaces
BETTLIFT Built-in foldaway bed
With slatted frame
End mounted single or double bed
Torsion-free tubular steel frame, laminated
wood slats and rubber caps
Colour:
Anthracite frame, natural wood slats
Version:
With gas filled struts for easy opening and
closing, with automatic foot mechanism
and mattress retainer
Slatted frame:
With 28 wooden slats mounted in flexible
pockets with cushioning support, with
shoulder comfort zone, with 5 central zone
reinforcing slats and centre strap,
continuously adjustable support degree
regulation
Installation:
Quick fixing system (bearing plates, gas
filled strut, pre-mounted foot linkage)
With or without mattress
With LGA quality certificate
•
•
Support degree regulation
•
Resilient wooden slat pockets
•
•
•
Automatic foot mechanism
Angular feet automatically come out when the bed is opened and
are retracted when the bed is closed again.
960
480–600
75–100
1780
incl. foot
approx. 320
slatted frame
upper edge
90–100
2100
2100
1926
480–600
1780
incl. foot
approx. 320
slatted frame
upper edge
For inset front
900 x 2000 mm (W x L)
44 – 55 kg
Single bed
Without mattress
With HYPERFLEX mattress
Cat. No.
271.91.114
271.91.113
Packing: 1 set
Order reference
• Order 2 single beds and 1 centre support for double bed.
• Weaker or stronger struts can be installed for different load capacities.
French bed
1460
480–600
450–600
approx. 300 slatted
frame upper edge
• Version:
• Lying area:
• Load capacity:
• Version:
• Lying area:
• Load capacity:
Installation
• Follow supplied installation drawing and assembly instructions.
• The specified carcase dimensions are internal carcase dimensions.
• Use material that is at least 19 mm thick for carcase construction.
• Secure foldaway beds with provided securing brackets to prevent
tilting.
Single bed
Without mattress
Packing: 1 set
approx. 330 slatted frame upper
edge
75–100
For inset front
900 x 2000 mm (W x L)
40 – 55 kg
Cat. No.
271.91.141
271.91.143
1780 incl.
foot
For inset front, comfortable opening and
closing using double lift gas filled strut
1400 x 2000 mm
60 – 80 kg
Installation
• Secure foldaway beds with provided securing brackets to prevent
tilting.
Single bed
Without mattress
With mattress
Smart Bedrooms
840
incl.
foot
2100
1100
2056
70–105
Side mounted bed
• Version:
• Lying area:
• Load capacity:
• Material:
Cat. No.
271.91.130
271.91.134
Packing: 1 set
x
Fo r Hy pe rf le
e
M att re ss se
Page 83
www.hafele.com
87
Smart Spaces
Accessories
BETTLIFT Built-in foldaway bed
Centre support
With wooden slats and adjustable head section
Resilient wooden slat pockets
Connecting two single beds to make a
double bed
Finish
Powder-coated anthracite
Material
Steel
Cat. No.
271.87.100
Securing brackets
Installation
• Ensure that the wall surface is suitable for
attaching the securing brackets.
• Secure foldaway beds with securing
brackets to prevent tilting.
Finish
Material
Steel
Cat. No.
271.98.100
Angular foot
•
•
•
•
•
•
•
•
Supplied with
2 Securing brackets
3 Bedding straps
580
1900
1630
incl. foot
80–95
Smart Bedrooms
1860
960
• Version:
Supporting the open bed
With fixing plate
Finish
Material
Steel
Cat. No.
271.95.360
approx. 300
slatted frame
upper edge
580
1630
incl. foot
approx. 300
slatted frame
upper edge
Installation
• 2 Single beds can be installed next to each other to make the
double bed. Each bed can be pulled-out of the cabinet individually.
Bedding strap
Single bed
Without mattress
• For bed width:
For holding bedding when closing bed
900 – 1400 mm
For bed width mm
Up to 900
Up to 1,200
Up to 1,400
88
1860
• Installation:
To prevent carcase of foldaway beds from
tipping
Screw fixing
80–95
Foldaway bed that can be screwed to a
base with self-lubricating bearing and
concealed gas filled struts for easy opening and closing, with integrated automatic
foot mechanism and mattress retainer,
for inset front and slatted frame
Material:
Torsion-free tubular steel frame,
resilient natural beech wood slats
Colour:
Anthracite frame, light beige slatted frame
Mattress overlay:
Multiple glued resilient wooden slats
mounted in plastic pockets, head section
with 7 positions
Inner carcase width: End mounted single bed 960 mm,
double bed 1,900 mm
Lying area:
900 x 2,000 mm (W x L)
Load capacity:
41 - 45 kg
Internal carcase height:1860 mm
Plinth height:
80 - 95 mm
www.hafele.com
Cat. No.
271.87.920
271.87.921
271.87.922
Cat. No.
271.96.156
271.96.151
Order reference
• Order 2 single beds to make double bed.
• Weaker or stronger struts can be installed for different load
capacities.
x
Fo r Hy pe rf le
e
M att re ss se
Page 83
• Version:
Smart Spaces
LCD Supports
• Features :
Oyster LCD screen holder
Inclinable wall bracket with one articulation
Load capacity kg
20
Screen size cm
25 - 74
Cat. No.
818.91.910
Inclinable wall bracket with two articulations, 180°
and 190° rotation and 20° up and down tilt
Load capacity kg
20
Screen size cm
25 - 74
Under cabinet support with one articulation
Load capacity kg
5
Screen size cm
25 - 50
Cat. No.
818.92.930
Trisolution LCD screen arm
Bisolution LCD screen arm
• Features:
• Features :
Cat. No.
818.91.930
• Features:
• Length:
Inclinable wall bracket with three articulations, 20° up
and down tilt, 190° rotation on last articulation
450 mm
Total length: 160 mm arm and 240 mm arm
Load capacity kg
20
Screen size cm
25 - 74
Monosolution LCD screen arm
Cat. No.
818.91.920
Hisolution LCD screen arm
Pull-out LCD bracket
Inclinable ceiling bracket with one articulation,
190° rotation and 20° tilt
Load capacity kg
20
Screen size cm
25 - 74
Cat. No.
818.92.910
Universal inclinable wall support for plasma and LCD
Load capacity kg
40
Screen size cm
50 - 82
Cat. No.
818.91.940
Load capacity kg
12
Cat. No.
421.99.900
• Features :
Universal inclinable wall support for plasma and LCD
Load capacity kg
75
Screen size cm
76 - 160
Cat. No.
818.91.960
Liftplasma
Fixplasma XL
• Features :
Cabinet support (fixed to any side), extends out
and rotates up to 180°
Monoplasma XL
Monoplasma S
• Features :
• Features :
Smart Bedrooms
• Features:
Universal support with fixed inclination for large
plasma and LCD screens
• Features :
Load capacity kg
75
Screen size cm
76 - 160
Cat. No.
818.91.950
Rotatable and extendable ceiling arm to apply to
Monoplasma and Fixplasma
Load capacity kg
75
Cat. No.
818.92.920
www.hafele.com
89
Smart Spaces
Electronic Lift System for Plasma and LCD Screens
Screen motion, max. weight 65 kg
Idea + TV, max. weight 65 kg
• Finish:
• Colour:
• Version:
• Min. internal height:
• Power supply:
In cabinets for raising and lowering
plasma/LCD screens
Max. width: 1600 mm
Max. height without foot: 820 mm
Max. weight: 65 kg
Plastic coated
Graphite black RAL 9011
2 sockets for built-in equipment
TV socket with automatic off switch
Manual switch and remote control
Tilt angle max. 11.5°
Swivel angle max. 180°
820 mm
230 V / 50HZ
• Material:
• Finish:
• Colour:
• Version:
• Power supply:
Aluminium / steel
Anodised, plastic coated
Silver coloured,
white aluminium RAL 9006
Infra red remote control and manual
switch, continuous travel guidance,
automatic screen switch off when
travelling down
230V / 50HZ
Travel mm Dimension W x D mm
720
900 x 860
820
1000 x 980
Height mm
max. 1580
max. 1800
Cat. No.
421.68.960
421.68.961
Packing: 1 piece
Travel mm
965
Dimension W x D mm Material
800 x 220
Sheet steel
Cat. No.
421.68.260
Packing: 1 piece
• Mounting:
• Speed:
• Height:
• Version:
Material
Steel
plasma/LCD screens
Max. weight: 100 kg
400 x 100 mm, 400 x 400 mm,
600 x 200 mm, 600 x 400 mm
25 mm / second
715 mm (closed) to 1465 mm (open)
Includes radio frequency remote control
and mounting bracket.
Finish
Black
Packing: 1 piece
Notes
Cabinet and screen not included.
90
www.hafele.com
Cat. No.
421.68.420
Mini-lift
For raising and lowering plasma and LCD screens
• Mounting:
• Speed:
• Height:
• Version:
Material
Steel
plasma/LCD screens
Max. weight: 50 kg
50 x 50 mm, 75 x 75 mm, 100 x 100 mm,
200 x 100 mm, 200 x 200 mm
25 mm / second
645 mm (closed) to 1105 mm (open)
Includes radio frequency remote control
Finish
Silver
Cat. No.
421.68.421
Packing: 1 piece
Notes
Cabinet and screen not included.
Smart Bedrooms
Maxi-lift
For raising and lowering plasma and LCD screens
Smart Spaces
Sliding Ladders
Pole ladder
In combination with sliding door fitting
Cat. No.
819.23.010
Track mounting set
Packing: 1 piece
Supplied with
2 Top right cover caps, grey plastic
2 Top left cover caps , grey plastic
4 Bottom right and left cover caps, grey plastic
4 Top stoppers for ladder, grey plastic
10 Connecting bolts 7 mm, galvanised steel
10 Cross dowels for connecting bolts, steel
Track mounting set
• Material:
• Finish:
• Version:
For library, hotel and residential areas
Ladder and rungs: Steel
Rollers and cover: Plastic
Ladder: Chrome-plated
Rungs: Chrome-plated with plastic coating,
black
Ball bearing mounted rollers with rubber
coating, with stopper, non-slip rungs
Version
Load bearing capacity 40 kg
Cat. No.
819.23.020
Packing: 1 piece
Ladder
Finish
Grey, lacquered
Number of steps
7
7
Cat. No.
819.20.200
819.20.500
Supplied with
2 Running gears, grey plastic, with ball bearing mounted plyamide rollers
2 Top end stops, grey plastic
2 Bottom end stops, grey plastic
2 Bottom track glides, grey plastic
2 Connecting bolts 7 mm, steel
2 Cross dowels for connecting bolts, steel
Packing: 1 piece
Guide track
Smart Bedrooms
Sliding door mounting set
For door thickness 25 - 28 mm
Running track
• Installation:
Material
Aluminium
Finish
Length mm Cat. No.
Silver coloured, anodised 6000
819.21.960
Packing: 6 metres
Finish
Anodised
For screw fixing
Length mm
6000
Cat. No.
819.22.960
Packing: 6 metre
www.hafele.com
91
Smart Spaces
Sliding Ladders
Sliding ladders
800
Hook-in height
• Material:
Smart Bedrooms
• Finish:
• Width:
• Step thickness:
• Version:
• Installation:
Birch
lacquered in
natural colour
Frames, handrail and step holders made of stainless steel,
steps made of birch or beech veneer plywood
Frames matt brushed, steps clear lacquered
450 mm
19 mm
Hook-in element with 3 castors
Hooking-in
Notes
The ladder is braked at the top and bottom under load
Sliding ladder is protected against unintentional unhooking
The hook-in ladder is also available without steps. Your own choice of steps can be individually
adapted to the shelf’s finish
Hook-in height
mm
Clearance
mm
Number
of steps
Without
steps
2000 – 2240
2250 – 2490
2500 – 2740
2750 – 2990
3000 – 3250
800
880
950
1030
1100
8
9
10
11
12
Cat. No.
819.18.001
819.18.002
819.18.003
819.18.004
819.18.005
Steps
Beech
Cat. No.
819.18.031
819.18.032
819.18.033
819.18.034
819.18.035
Steps
Birch
Cat. No.
819.18.081
819.18.082
819.18.083
819.18.084
819.18.085
Packing: 1 piece
Order reference
Please specify the exact hook-in height as well as the catalogue number when ordering.
Ladders are made to order, therefore please enquire for delivery time.
92
www.hafele.com
Beech
lacquered in
natural colour
Clearance
Smart Spaces
Sliding Ladders
Hook-in track
• Material:
• Finish:
Stainless steel
Matt brushed
Cat. No.
819.17.099
Packing: See order reference
Order reference:
Please specify fixed length and position of track holders as well as
catalogue number when ordering. We require a drawing for each
order. The maximum hook-in track length is 3000 mm. For lengths
of more than 3000 mm the hook-in tracks are connected using the
provided locating pin.
• Material:
• Finish:
• Installation:
Stainless steel
Matt brushed
Screw fixing to intermediate/top shelves
and to middle/side panel
Cat. No.
819.17.090
Packing: 1 piece
Stop
• Material:
• Finish:
• Installation:
Stainless steel
Matt brushed
Plugging in and screw fixing
Cat. No.
819.19.091
22
48
Smart Bedrooms
Track holder
Packing: 1 piece
18
2.5
www.hafele.com
93
Smart Spaces
Aluminium Roller Shutter Doors
Smart case aluminium roller shutter door
With counterbalancing mechanism
Installation dimensions
16
2
21
27.5
min. 300
B
123
123
13
A
Smart Bedrooms
• Features:
Shelf (optional)
Ready to use module, with guide rails and
counter balancing mechanism, aluminium
roller door, guide elements and grip handle
Roller door: Aluminium E6 / CO corroded,
colourlessly anodised
Handle profile height: 75 mm
Slat profile height: 25 mm
Smart case box mechanism;
plastic counter housing
Carcase construction: 16 mm
Min. internal carcase depth: 300 mm
• Material:
Carcase height A mm Carcase width B mm Cat. No.
1200
600
443.47.940
1200
900
443.47.980
Packing: 1 piece
94
www.hafele.com
Smart Doors
Smart Spaces
Smart Doors
www.hafele.com
95
Smart Spaces
Sliding Doors
EKU Clipo 25S Mixfront sliding door system
For door weights up to 25 kg
•
•
•
•
Max. door height:
Max. door width:
Door thickness:
Height adjustment:
2200 mm
1000 mm
19 mm
Eccentric height adjustment of ±2 mm
on running gear
Running gears with clip mounting
friction bearing rollers
• Features:
For 2 doors with fitting instructions
Cat. No.
405.00.001
405.00.002
Running rails and accessories
Single running rail, upper with
screw holes and two notches at
each end of running rail, min.
cabinet top thickness of 30 mm
Installation of housing
Material
Aluminium, bright
Aluminium, bright
Length mm
2500
3500
Cat. No.
405.00.250
405.00.350
Single guide rail, lower for screw
fixing.
Length mm
2500
3500
Cat. No.
405.52.025
405.52.035
EKU Clipo 25S Infront sliding door system
•
•
•
•
Max. door height:
Max. door width:
Door thicknesses:
Height adjustment:
2200 mm
1000 mm
19 – 26 mm
Eccentric height adjustment of ±2 mm
on running gear
Running gears with clip mounting
friction bearing rollers
Smart Doors
• Features:
Cat. No.
405.04.001
17
Installation of housing
Material
Aluminium, bright
Aluminium, bright
Length mm
2500
3500
Single running rail, upper with
screw holes and two notches at
each end of running rail, min.
cabinet top thickness of 30 mm
Cat. No.
405.00.250
405.00.350
Single guide rail, lower for gluemounting with harpoon ribs.
Material
Aluminium, bright
Aluminium, bright
96
www.hafele.com
Length mm
2500
3500
Cat. No.
405.04.250
405.04.350
Material
Aluminium, bright
Aluminium, bright
Smart Spaces
Sliding Doors
For door weights of up to 50 kg
Application of Indamatic Superior
and Japanese style design
2 Door Superior
Indamatic Automatic Soft Closer
2 Door Japanese
Superior
Japanese
79
80
1,5
79
5
h = H(min) - 36,5
5
5
H(min)
h = H(min) - 43,5
h = H(min) - 39,5
H(min)
For wardrobe claddings, walk-in
wardrobes and room dividers
• Door panels:
Wood, glass or mirror
• Door thickness:
For wood, 16 mm and 10 mm for glass or
mirror 6 mm
• Height adjustment:
± 4 mm on running gear
• Material:
Steel running gear, plastic guide rollers
• Running gear:
Bottom running, 1 roller, with friction bearing
mounted, plastic sleeved roller
• Compensates for uneven areas on ceilings ± 10 mm
h = H(min) - 46,5
26.2
80
38.75
1,5
33.2
26.2
16
31.25
10
31.25
21 10
31
21 10
31
11.5
3 Doors
Smart Doors
38.75
33.2
2 Doors
13
4 Doors
90
110
Application of running options
13
www.hafele.com
97
Smart Spaces
Sliding Doors
Indamatic Automatic Soft Closer
Set
For 2 door
For 3 door
Set components
1. INDAMATIC
SOFT CLOSE®
2. UPPER DOOR GUIDE
3. LOWER CARRIER
7. DOOR POSITIONER
For 3 door
Pieces
Set
Cat. No.
403.90.000
403.90.001
4
4
4
-
4
6
6
1
1
2
3
4
Material/Finish
16
Frame Profiles
Door Stop profile 16 mm
For use with 16 mm door panel
thickness
Length m
5.2 m
Aluminium
1 piece
silver coloured anodised
403.93.952
10
Order reference
• Please order frame profiles running and guide tracks, subdividing Japanese design profile, assembly kits, glass fixing profile and
bush sealing strip separately.
5.2 m
Aluminium
1 piece
403.92.952
13
2m
Aluminium
1 piece
403.97.920
110
2m
Aluminium
1 piece
403.98.920
4.2 m
Aluminium
1 piece
403.94.942
4.2 m
Aluminium
1 piece
403.96.942
4.2 m
Aluminium
1 piece
403.95.942
2m
Aluminium
1 piece
403.91.920
31.25
For 2 door
Pieces
Packing
Cat. No.
21 10
31
111,5
Door Stop profile 10 mm
For use with 10 mm door panel or
alternatively glass fixing profile
403.90.030 for use with 4 mm and
6 mm thick glass panels
Bottom profile for 10 mm panels
31.25
21 10
31
13
Bottom profile for glass panels
Guide and running tracks
For Infront design:
Top double running track,
for screw fixing
40
79
8
For Infront design:
Bottom guide track,
for screw fixing or groove mounting
52,75
98
Assembly kit:
for Subdividing Japanese
5
15
Accessories
Subdividing Japanese design profile,
for use with 10 mm panel or
alternatively glass fixing profile
403.90.030 for 4 mm and 6 mm thick
glass panels
20
5
Smart Doors
0,7
12
13,7
Set
Glass fixing profile:
Suitable for 4 mm and 6 mm glass
panel thickness
175 m
Plastic
Translucent
Brush Sealing Strip
–
Cloth
Grey
www.hafele.com
1 Set
(3 panels)
403.90.010
1 Set
(4 panels)
2m
403.90.011
1m
403.90.020
403.90.030
90
Smart Spaces
Sliding Doors
SILENT ALUFLEX 80 - Infront or Forefront
Mounting of sliding door fittings
For door weight up to 80 kg
with pre-fitted running rails
•
•
•
•
Wood, glass or mirror
Max. 3000 mm
500 - 1500 mm
For timber 10 mm,
For glass or mirror 5 - 6 mm
Height adjustment: +5 mm on running gear and axle,
plastic guide rollers
Features:
Bottom running, 1 roller
Mounting:
Screw fixing aluminium frame and guide
rails, running rails to fit in or glue on
Compensation for uneven flooring up to +10 mm
2- running rails
1- running rail with dampener
3- running rails
•
•
•
•
1- running rail
For door panels:
Internal height:
Door width:
Door thickness:
Infront application with straight ceilings
Sliding doors and double running and guide tracks are supplied in
stock lengths that can be cut to size or in custom lengths,
ready-to-install with all required fittings.
3 Doors
4 Doors
With press fitted running guides
1- running rail
Door insert - timber, mirror
or glass
2- running rails
Smart Doors
2 Doors
Straight sliding door component list
1 Aluminium frame in lengths
2 Guide Rollers
1 Door stop
2 Screws for corner connection
2 Running gears, pre-mounted in bottom aluminium frame profile
1 Glass retaining profile for surrounding the glass or mirror panel
Small Spaces 09 / HNZ
www.hafele.com
99
Smart Spaces
Sliding Doors
Glass insert height calculation
Sliding fittings
Single door insert (A1)
Two door inserts (B1, B2)
P2
GH2 = P2 - 18
P1
GH1 = P1 - 54
Door width calculation
H = (P1 + P2)
GH = H - 62
H
Version with 1A with 1 door
Door width B = Internal width B1 + 70 mm
Version 1B with 1 door
Three door inserts (C1 - C3)
Version with 3 doors (3)
B1
P1
Door width = internal width B1 + 70 mm
3
GH3 = P3 - 18
GH2 = P2 - 10
2
H = (P1 + P2 + P3)
GH1 = P1 - 54
P3
P2
For walk-in wardrobes and room dividers
B1
4
Note
For 10 mm thick timber inserts. add 2 mm to all glass insert height
calculations
Version with 4 doors (4A)
B1
Door height calculation
Smart Doors
Length:
Door width – 68 mm
Door height without dampener
H = internal height H1 – 40 mm
Soft-close dampener installation
Door height with soft-close dampener
H = internal height H1 - 60 mm
Door insert width calculation
Door insert width timber TW = door width B – 46 mm
Door insert width glass GW = door width B – 48 mm
100
www.hafele.com
Note
Double upper guide rail 403.70.960 must be used in
conjunction with the soft-close dampener.
Intermediate profile installation
4
Smart Spaces
Sliding Doors
For door weight up to 80 kg
For straight ceilings, pre-made to a fixed size
2
B1
3
B1
4
B1
4
Fitting set - Infront
• Finish:
Version with 1 door (1A)
Version with 1 door (1B)
Variation
Cat. No.
For 2 doors - Variation 2
403.51.902
403.51.903
403.51.904
For 4 doors - Variation 4A
403.51.905
Packing: 1 set
Running and guide rails - Infront
A.
Fitting set - Forefront
• Finish:
B.
C.
D.
Variation
Cat. No.
1A
403.51.921
1B
403.51.922
2A
403.51.923
E.
F.
80
119
Packing: 1 set
Running and guide rails - Forefront
A.
• Material:
• Length mm:
• Material:
• Length mm:
C.
B.
Aluminium, silver coloured anodised
Fixed length
Description
Cat. No.
A. Single bottom running rail, surface mounted
403.57.960
B. Single bottom running rail, recess mounted
403.68.960
C. Single upper guide rail, screw fixing
403.59.960
Fixed length
Description
Cat. No.
A. Double bottom running rail, surface mounted
403.58.960
B. Double bottom running rail, recess mounted
405.69.960
C. Triple bottom running rail, surface mounted
403.66.960
Smart Doors
D. Double upper guide rail, for sliding door dampener 403.70.960
E. Double upper guide rail, screw fixing
403.60.960
F. Triple upper guide rail, screw fixing
403.97.960
Packing: 6 m length
Packing: 6 m length
www.hafele.com
101
Smart Spaces
Sliding Doors
Components for aluminium door frames
Description
Material
Length
mm
Packing
Cat. No.
Bottom running gear
Steel, zinc-plated
–
1 piece
403.50.990
Upper guide
Steel, zinc-plated
–
1 piece
403.50.991
Stopper, for press fitting and gluing into the bottom running
rail
Plastic, transparent
–
1 piece
403.50.992
Plug, for mounting in a drill hole on the
lateral frame profile
Plastic,
silver coloured
–
1 piece
403.50.970
Mounting clips, for intermediate profile
Plastic, white
–
1 piece
403.50.960
Brush seal, to protect the inside of the cabinet from dust,
self-adhesive on one side, for gluing to the
lateral frame profile
Synthetic brush,
grey
10,000
1 roll
403.54.510
Corner connector for single running rails, for lateral
coverage of the single running rail with forefront
configuration, with rubber buffer as stopper, screw fixing
Powder-coated,
silver
–
1 piece
403.55.990
Soft-close dampener for door weights up to 35 kg, screw
fixing into double upper guide rail 403.70.960
Plastic, black/grey
–
1 set
403.50.999
Description
Material
Length
mm
Packing
Cat. No.
Bottom frame profile, for the
construction of aluminium frames
Aluminium,
silver coloured
anodised
6000
6000
403.61.960
Top frame profile, for the
construction of aluminium frames
Aluminium,
silver coloured
anodised
6000
6000
403.62.960
Lateral frame profile, for the
construction of aluminium frames, with integrated finger pull
Aluminium,
silver coloured
anodised
6000
6000
403.63.960
Intermediate profile, for supporting the
door insert (glass, timber or mirror)
Aluminium,
silver coloured
anodised
6000
6000
403.52.960
Glass retaining profile, for stabilisation and clatter
prevention of the glass insert
Plastic, transparent
6000
6000
403.56.960
102
www.hafele.com
Smart Doors
Aluminium door frame profiles
Smart Spaces
Sliding Doors
SILENT Woodflex 80 for timber doors
•
•
•
•
•
Internal height:
Door width:
Height adjustment:
Version:
Material:
• Running gear:
• Installation:
Max. 3000 mm
500 to 1500 mm
-5+10 mm on running gear using screw
Plastic coated ball bearings
Steel running gear, plastic guide
rollers, steel axle
Bottom running, 1 roller
Running track for recess mounting or
glue fixing
Installation
H = H1 - 50 mm
with glued on running track
Smart Doors
H = H1 - 57 mm
with recess mounted running track
www.hafele.com
103
Smart Spaces
Sliding Doors
SILENT Woodflex 80 for timber doors
104
Cat. No.
For 1 wooden door
403.50.941
Tracks and individual components
Length
mm
Material
Finish/Colour
Packing
Cat. No.
Single running track
for glue fixing
2500
3500
Aluminium
Silver coloured anodised
1 piece
1 piece
403.57.925
403.57.935
Single running track
for recess mounting
2500
3500
Aluminium
1 piece
1 piece
403.77.925
403.77.935
Double running track
for glue fixing
2500
3500
Aluminium
1 piece
1 piece
403.58.925
403.58.935
Double running track
for recess mounting
2500
3500
Aluminium
1 piece
1 piece
403.78.925
403.78.935
Single guide track
2500
3500
Aluminium
1 piece
1 piece
403.76.925
703.76.935
Double guide track
2500
3500
Aluminium
1 piece
1 piece
403.72.925
403.72.935
Centre door stopper
for screwing into the
top guide track
–
Plastic
Grey
1 piece
403.50.945
Centre guide for
complete slope
–
Steel
Powder-coated, white
aluminium, RAL 9006
1 piece
403.50.995
Guide track for
complete slope
1490
Aluminium
(E6/EV1)
1 piece
403.64.915
End bracket for
single guide track,
height 60 mm, for
covering the sides,
for screw fixing
–
Steel
Powder-coated, white
aluminium, RAL 9006
1 piece
403.55.991
Cover cap for single
running track
–
Stainless steel
Brushed
1 piece
403.55.060
Soft closing
mechanism for door
weights up to 15 kg
–
Plastic
Black/grey
1 set
403.50.988
Soft closing
mechanism for door
weights up to 35 kg
–
Plastic
Black/grey
1 set
403.50.999
Soft closing
mechanism for door
weights up to 50 kg
–
Plastic
Black/grey
1 set
403.50.989
www.hafele.com
Smart Doors
Infront
Smart Spaces
Sliding Doors
Slider E 35 for wardrobes
•
•
•
•
•
•
•
•
•
Door height:
Max. 2200 mm
Door width:
600 to 1900 mm
Door thickness:
Incl. handle: 18 - 45 mm
Height adjustment:
With hexagon head screw
Depth:
Fitting without door: min. 340 mm
Version:
For 2 doors
Symmetrical door arrangement
Distance from handle to door edge (K) >10 mm
Door overlap at side and top 17 mm (standard set)
Standard set
For 2 doors, with installation
instructions
For cabinet width
mm
For door width
mm
Material thickness
mm
Dim. A mm
Dim. B mm
Cat. No.
1200
1800
2400
3000
3800
596
896
1196
1496
1896
19
202.3
352.3
502.3
652.3
852.3
97.4
247.4
397.4
547.4
747.4
406.11.031
406.11.034
406.11.037
406.11.040
406.11.044
Note:
The dimensions specified in the order table must be adhered to for standard sets.
Smart Doors
Packing: 1 set
www.hafele.com
105
Smart Spaces
Sliding Doors
Forefront up to 40 kg
With smuso gentle closing
• Total width (C)
• Inner height (D)
• Door height (E)
• Door width (F)
• Door overlap at cabinet side (G)
• Door thickness (I)
• Door thickness incl. handle max. 45 mm (J)
• Distance from handle to outer edge of door (K)
• Top panel thickness (L)
• Side panel thickness (M)
• Base panel thickness (N)
• Centre panel thickness (O)
• Total height (Q)
Smart Doors
Drilling pattern for door
106
www.hafele.com
Smart Spaces
Sliding Doors
PEGASO 20 – Forefront
Single door application
Double door application
Corner double door application
• Min. carcase width:
• Max. carcase height:
• Adjustment:
• Features:
• Finish:
Connecting bar
Length
2500 mm
Supplied with
2 Handed fittings for fixing to cabinet ceiling and floor
2 Door mounting brackets
Min. cabinet width L
398 mm
475 mm
Travel
450 mm
600 mm
Cat. No.
407.32.910
Fitting Set
For Aluminium framed door
152
88
40
Cat. No.
407.32.901
407.32.902
10
23
64
78
Centre hinge
4
86
64
1+B
1.2 / 2
6
4.2+0.2
Smart Doors
Door opening mechanism set
398 and 475 mm
2576 mm
±4 mm vertical, ±2 mm horizontal
±4 mm in the inclination
Moves doors forward and away to the
side allowing maximum access to
the cabinet
No hinges required
Can be used for single or double
doors, corners, wood doors or glass
doors with frames
R2
• Area of
application:
• Finish:
• Mounting:
Cat. No.
407.32.930
For connecting door opening mechanism to
Aluminium frame profiles, 45 mm with lip
Use in place of door mounting brackets included
with door opening mechanism
Cat. No.
407.32.920
www.hafele.com
107
Smart Spaces
Sliding Doors
Motion V door opening mechanism
Application
With soft closing mechanism
Motion V 1
Motion V 2
Motion V 3
Motion V 1
Motion V 2
Motion V 3
Dim. A
460.5
515
613
Dim. E
780 - 880
880 - 980
980 - 1180
Dim. B
428.5
483
581
Dim. F
818
930
1127
Dim. C
62.5
63
66.5
Dim. G
155
155
180
Dim. D
466
500.5
598.5
Dim. H
405
460
560
X = lateral door overlay
Y = centre panel overlay
Z = top door overlay
• Internal cab. width:
• Adjustment facility:
• Material:
• Finish:
For large cabinet and connecting doors
780 - 1180 mm
±2 mm vertically, 8 mm horizontally, only
at bottom, ±15 mm tilting angle
adjustment, top
Cast aluminium
Powder-coated
Drilling pattern
Motion V 1
Motion V 2
Motion V 3
Internal cabinet
width mm
Door weight kg
Cat. No.
780 - 880
880 - 980
980 - 1180
Up to 50
Up to 50
Up to 40
407.33.501
407.33.502
407.33.503
Order reference
The synchronising bar is required and must be ordered separately.
Synchronising bar
Material
Steel
108
www.hafele.com
Finish
Chrome-plated
Cat. No.
407.33.510
Smart Doors
Set
Smart Spaces
Sliding Doors
Sliding door accessories
PLANOFIT Straightening fitting
Handle profile
50
14
2
16
2
54
20
•
•
•
•
Material:
Colour:
Installation:
20
For door thickness 16 - 20 mm
Aluminium
Screw fixing
Application
Handle profile
Length mm
2500
Cat. No.
126.90.907
Strengthening strip
24
14
16
20
2
• Material:
• Colour:
• Installation:
Stabilising the door, for door thickness
16 - 20 mm
Aluminium
Screw fixing
Application
Strengthening strip
Length mm
2500
Cat. No.
126.91.904
• Max. door height:
• Door thickness:
• Installation:
Prevents doors distorting in either
direction or straightens doors which have
become distorted
2400 or 2650 mm
From 16 mm
Can also be retrofitted for doors which
have become distorted, 2 straightening
fittings recommended per door, installed
at 25% and 75% x door width
Dust protection profile
With brush, for screw fixing (pre drilled holes)
11
4
12.4
• Material:
• Finish:
Length mm
2500
To protect inside of cabinet from dust
Aluminium base profile, artificial hair brush
Bright base profile, grey brush
Cat. No.
406.41.807
Door height
mm
Threaded pin
length mm
Cover rail
length mm
Cat. No.
Max. 2400
Max. 2650
1930
2205
1860
2135
406.99.100
406.99.000
Smart Doors
Set includes
1 Threaded rod, bright steel
1 Cover profile, black plastic
2 Clamping pieces, bright zinc diecast
2 Hex nuts, with washers
2 Cover caps for clamping pieces, black plastic
4 Retaining plates, black plastic
Note:
Not suitable for hard timber
www.hafele.com
109
Smart Spaces
Sliding Doors
LEPORELLO - Bi-folding door fittings
Running gear with hinge
• Material:
• Finish:
• Installation:
• Features:
Steel, with ball bearing mounted
nylon rollers
Galvanised
Screw fixing
Right or left installation
Cat. No.
409.26.921
Running rail
•
•
•
•
•
•
Max. door weight:
Max. door height:
Max. door width:
Door thicknesses:
Depth adjustment:
Mounting:
12.5 kg (25 kg per pair of doors)
2400 mm
450 mm (per leaf)
From 16 mm
±7 mm at running gear/guide via slot
Screw fixing
Installation of running gear and guide
• Material:
• Finish:
• Installation:
Aluminium
Bright
Screw fixing (pre-drilled holes)
Length mm
2500
3500
6000
Cat. No.
940.84.250
940.84.350
940.84.600
• Material:
Smart Doors
Mounting example for a two door cabinet
• Finish:
• Installation:
• Features:
Cat. No.
409.27.928
Guide rail
Order reference
Please order separately straight concealed hinges for mounting to
side panel, or cranked concealed hinges for mounting to centre
panel and hinges for connecting the two door leaves.
• Material:
• Finish:
• Installation:
Length mm
2500
110
Steel, with friction bearing mounted
nylon rollers
Galvanised
Screw fixing
Right or left installation
www.hafele.com
Aluminium
Bright
Screw fixing (pre-drilled holes)
Cat. No.
409.25.972
Guide with hinge
Smart Spaces
Sliding Doors
HAWA Multifold 30 W sliding and folding door fitting
Sealing profile
Door retainer
For door weights up to 30 kg (60 kg per pair)
Running rail
Brush
Retention
buffer
Suspension
•
•
•
•
•
Max. door height:
Door width:
For door thickness:
Height adjustment:
Features:
2600 mm
200 – 500 mm
19 – 25 mm
±2 mm on the running gear
Same fitting applicable for Infront
and Forefront
Light, quiet running
Horizontal seals reduce sound
Quick assembly
Centre concealed
hinge
Infront
Forefront
Infront
Application
Forefront
Set components
Description
Running gear
Suspension unit
Upper door buffer
Door retainer
Roller hinge, offset
Interlocking door holder
Side mount door holder
Running rail 1100 mm
Material
Zinc die-cast, black
Zinc die-cast, galvanised
Plastic, black
Plastic, black
Steel, nickel-plated matt
Plastic, black
Plastic, black
For 1 pair of doors
1 piece
1 piece
1 piece
1 piece
4 piece
1 piece
1 piece
1 piece
Fitting set For 1 outer panel pair with fitting instructions 409.52.050
Description
Interlocking door holder, between
two panel pairs
Material
Plastic,
black
Length mm
-
Packing
1 pair
Cat. No
409.50.940
-
Sealing profile, for pressing into
2.5 mm groove
Rubber,
black
5000
1 roll
409.54.300
-
Milling jig for guides and
suspension unit
Laminated
timber
-
1 piece
409.50.990
-
www.hafele.com
Smart Doors
Rolled hinge and sealing profile detail
111
Smart Spaces
Pivot Sliding Door Fittings
HAWA FIERO 25/35 - Infront/Forefront
pivot sliding door fitting
T
T
95
95
E
E
Pantograph bearing
Door guide
Door guide
channel
H
Height adjusting
screw
90
90
Pantograph
Deflection pulley
Pantograph
guide
H
Clamp plate
95
Upright
guide rail
E
Hinge
Guide channel
Upright guide
• For door thicknesses:
• Intermediate panel:
• Features:
700 - 2250 mm for Fiero 25
2251- 2850 mm for Fiero 35
19 - 28 mm
19 mm
With two scissor assemblies arranged
one above the other, applicable
with Fiero 35
Application
H = Internal carcase height
E = Maximum retraction depth from the
inner side of the closed door
T = Maximum installation depth for
mounting the fitting from the inner
side of the closed door to the rear
edge of the fitting. If the cabinet is
deeper, the fitting must be mounted
at the distance T from the inner side
of the closed door.
Note
All hardware components are fitted to the internal carcase panel,
which must be removable for installation and access to the fitting.
For forefront installations
HAWA FIERO 25 - Pivot sliding door fitting
Internal
carcase
height (H)
mm
700 – 900
901 – 1200
1201–1800
1801–2250
Max.
retraction
depth (E)
mm
350
470
500
530
25 kg
700 - 2250 mm
Max.
installation
depth (T)
mm
445 mm
565 mm
595 mm
530 mm
For 1 right
hand door
407.70.010
407.70.027
407.70.036
407.70.045
• Length:
• Material:
• Features:
For 1 left
hand door
407.70.110
407.70.125
407.70.134
407.70.143
Cat. No.
407.70.214
407.70.223
White
Black
Installation of surface mounted guide rail
S
112
25
HAWA FIERO 35 - Pivot sliding door fitting
35 kg
2251 - 2850 mm
Internal
carcase
height (H)
mm
Max.
retraction
depth (E)
mm
Max.
installation
depth (T)
mm
2251-2850
530
625 mm
www.hafele.com
For 1 right
hand door
58
• Max. door weight:
296 mm
Plastic
For mounting of guide rail to the inner side of the
door, instead of a groove in the upper and lower
edge of the door, also allows forefront installations
25
Smart Doors
For 1 left
hand door
B
407.70.054 407.70.152
Infront
Forefront
Surface mounted guide rail
Smart Spaces
Pivot Sliding Door Fittings
Upright
guide rail
HAWA TURNAWAY 35/X3 - Pivot sliding door fitting
• Door height:
35 kg
1801 - 2450 mm
Fitting set
Internal
carcase
height (H)
mm
Pantograph
guide
Pantograph
Max.
retraction
depth (E)
mm
1801 – 2450
820
Max.
installation
depth (T)
mm
For 1 right
hand door
885 mm
For 1 left
hand door
407.73.055 407.73.153
Tension spring
Note:
With door weight max. 20 kg (40 kg for a pair) this pivot sliding
fitting can also be used for a pair of folding doors. For this application
please also order the HAWA FOLDING TURNAWAY 15/20.
Hinge
Upright
Height adjusting
screw
Pantograph
bearing
Upright guide rail
HAWA FOLDING TURNAWAY 15/20
Folding sliding door fitting
HAWA TURNAWAY 25/X2 and 35/X3 Infront pivot sliding door fitting
Door guide rail
Guide rail
• Door height:
• Door thickness:
650 - 1800 mm or 1801 - 2450 mm
22 - 45 mm
Corner piece
Height adjustment
Application
Guide rail
Height
adjustable screw
Bracket +
magnetic catch
Carrier and
end piece
Centre hinge
Guide
Door flush holder
Loosen the scissor arm at lower front of the
upright profile, adjust door clearance with
vertical adjusting screw, re-tighten screw.
Door flush holder for
2 door panel systems
Door guide
E = Maximum possible retraction
depth from the inner side of the
closed door
edge of the fitting. If the cabinet is
deeper, the fitting must be mounted
at the same distance T from the
inner side of the closed door
• Door leaf width:
• Door height:
• Max. door leaf weight:
• Door thickness:
Max. 600 mm
650 - 1800 mm or 1801 - 2450 mm
Door height 650 - 1500 mm = 15 kg
Door height 1501 - 2450 mm = 20 kg
19 - 35 mm
With height adjustment screws
Application
Smart Doors
HAWA TURNAWAY 25/X2 - Pivot sliding door fitting
• Door height:
• With panel thickness of 19 - 22 mm,
the panels will have the same width
• With panel thickness of 23 - 35 mm,
the first panel will be wider
25 kg
650 - 1800 mm
Fitting set
Internal
carcase
height (H)
mm
Max.
retraction
depth (E)
mm
650 – 1050
1051 – 1200
1201 – 1500
1501 – 1800
450
700
780
820
Max.
installation
depth (T)
mm
515 mm
765 mm
845 mm
885 mm
For 1 right
hand door
407.72.050
407.72.067
407.72.076
407.72.085
For 1 left
hand door
407.72.150
407.72.165
407.72.174
407.72.183
Fitting set
For 1 folding sliding door, right
For 1 folding sliding door, left
Cat. No.
407.73.063
407.73.161
Note
The HAWA TURNAWAY 25/X2 and 35/X3 is not included in the set.
Please order separately.
www.hafele.com
113
Smart Spaces
Pivot Sliding Doors
HAWA TURNAWAY 30/X4 and 40/X5
Pivot sliding door fitting
E = Maximum retraction depth from
the inner side of the closed door
edge of the fitting.
65
E
For door weights up to 30 and 40 kg
Pantograph
guide
max.
90°
If the cabinet is deeper, the fitting
must be mounted at the same
distance T from the inner side of the
closed door.
Pantograph
H
Hinge
max.
90°
T
HAWA TURNAWAY 30/X4
• Door weight:
• Door height:
Max. 30 kg
2451 - 2800 mm
Fitting set
Upright
Max.
retraction
depth (E)
mm
Max.
installation
depth (T)
mm
For 1
right hand
door
For 1
left hand
door
2451 - 2800
820
885
407.73.233 407.73.331
Packing: 1 set
Smart Doors
HAWA TURNAWAY 40/X5
Upright
guide rail
Height
adjusting
screw
• Door weight:
• Door height:
Max. 40 kg
2451 - 2800 mm
Fitting set
Internal
carcase
height (H)
mm
Max.
retraction
depth (E)
mm
Max.
installation
depth (T)
mm
For 1
right hand
door
For 1
left hand
door
2451 - 2800
820
885
407.73.439 407.73.537
Packing: 1 set
Height adjustment
• Door height:
• Door thickness:
114
2451 - 2800 mm
22 - 45 mm
With height adjustment screws
www.hafele.com
Loosen the scissor arm at the lower
front of the upright profile, adjust door
clearance with vertical adjusting
screw, re-tighten screw.
Tension spring
Internal
carcase
height (H)
mm
Smart Spaces
Alusion Door Ordering Program
The most comprehensive hardware selection for Aluminium Frame Doors
Now manufactured in-house.
Major price reductions available.
Order Online now www.hafele.com
24/7 immediate pricing and ordering
capabilities
Accuracy Of Orders
No more misinterpreting handwriting
on faxes
Order Tracking
Up to date info in regards to status of
pending orders
Error free
Clear parameters on what can and
can’t be achieved for your applications
Smart Lighting
116
www.hafele.com
Smart Lighting
Smart Spaces
Smart Spaces
Halogen Lighting
Low voltage lighting
6
• Material:
• Installation:
• Complete with:
• Minimum drilling
depth E:
Plastic
Mounting in drilled hole, with clamp fixing
Lead 2,000 mm H03 VV H2-F, 2 x 0.75 mm
Separate AMP plug
Bulb: 10 or 20 Watt
Set of installation instructions
Glass pane clear
E = 16 mm (10 watt)
E = 16 mm (20 watt)
4
14
Ø55
Colour
White
Chrome polished
Gold polished
Nickel matt
Black matt
Ø66
Material
Watt
Plastic lamp housing 10
Cat. No.
823.17.717
823.17.217
823.17.815
823.17.610
823.17.315
Neptune halogen light
With frosted glass lens
Econo light range
Wattage W
Cat. No.
1 x 10
1 x 10
1 x 10
1 x 10
1 x 10
1 x 10
823.94.710
823.94.310
823.94.410
823.94.210
823.94.610
823.94.810
1 x 20
1 x 20
1 x 20
1 x 20
1 x 20
1 x 20
823.94.720
823.94.320
823.94.420
823.94.220
823.94.620
823.94.820
Packing: 1 piece
Surface mounting ring
Low heat halogen light
Press fit into 78 mm installation hole
Finish
White
Chrome
Brass
Satin-nickel
Satin-chrome
Watt
20
Cat. No.
821.87.752
821.87.252
821.87.852
821.87.652
821.87.452
Packing: 1 piece
18
Samoa sensor light
Press fit into 58 mm installation hole
Smart Lighting
Packing: 1 piece
Finish
Single light without transformer
White
Black
Chrome-plated matt
Chrome-plated polished
Nickel-plated matt
Gold coloured polished
Single light without transformer
White
Black
Chrome-plated matt
Chrome-plated polished
Nickel-plated matt
Gold coloured polished
Ø69
• Material:
Finish
White
Black, matt
Gold, polished
Chrome, polished
Chrome, matt
Nickel, matt
Plastic
Cat. No.
823.94.790
823.94.390
823.94.890
823.94.290
823.94.490
823.94.690
Finish
Polished chrome
Stainless steel
Watt
20
Cat. No.
823.62.250
823.62.050
Packing: 1 piece
Packing: 1 piece
mers &
Fo r Tra n sf or
e
S w itch es se
Page 124
www.hafele.com
117
Smart Spaces
Halogen Lighting
Low voltage lighting
Deimos recess mounted halogen light
Phoebe recess mounted halogen light
Ø55
19
15
Ø 55
• Material:
Ø63
0.5
5
Ø 68
Housing: plastic
Reflector: plastic
• Material:
Finish
Cat. No.
10 W
White
Cat. No.
20 W
Housing: plastic
Reflector: plastic
Finish
Cat. No.
10 W
Cat. No.
20 W
823.62.712 823.62.730
Nickel-plated, matt
823.63.610 823.63.620
823.62.212 823.62.230
823.63.219 823.63.228
Gold, polished
823.62.810 823.62.838
Black, matt
823.62.310 823.62.338
Chrome-plated, matt
823.62.410 823.62.430
Packing: 1 piece
Packing: 1 piece
Smart Lighting
65
65
36
36
0,6
0,6
Ø72
Ø72
• Material:
• Version:
• Material:
• Version:
Housing: metal
Without switch-off facility
Finish
Stainless steel
Wattage
20 W
Packing: 1 piece
Housing: metal
With automatic sensor switch-off
Cat. No.
823.91.021
Finish
Stainless steel
823.91.221
Wattage
20 W
Cat. No.
823.92.021
823.92.221
Packing: 1 piece
mers &
Fo r Tra n sf or
e
S w itch es se
Page 124
118
www.hafele.com
Callisto recess mounted sensor light
Umbriel recess mounted halogen light
Smart Spaces
Halogen Lighting
• Material:
• Finish:
Europa recess mounted halogen light
Minos surface mounted halogen light
Alabaster glass
Titanium
Wattage W
10
Cat. No.
824.16.001
824.16.791
71.5
Light fitting
Decorative glass shield
Rigid surface mounted halogen light
• Material:
• Finish:
• Features:
• Material:
• Finish:
• Rigid arm length:
Aluminium
Titanium coloured
150 mm
Wattage W
20
Cat. No.
824.08.902
Black, plastic
Titanium coloured
When sliding door opens the light will
automatically switch on and then off once
closed. Integrated transformer 230 V
Finish
Wattage W
Cat. No.
Aluminium colour
Black
20
20
824.07.912
824.07.312
Glass surface mounted halogen light
Swivelling head, with M6 thread
Stainless steel
Titanium
Wattage W
20
Smart Lighting
• Version:
• Material:
• Finish:
Cat. No.
824.02.012
Rhea surface mounted halogen light
• Material:
• Features:
10
116
Mimas surface mounted halogen light
40
• Version:
Finish
Wattage W
Cat. No.
Matt glass
20
824.37.402
Master care glass
Masterpoint glass
20
20
824.37.412
824.37.422
Stainless steel arm with 90° swivelling head
Titanium coloured
260
Glass arc
Pivotable cold light mirror lamp
Wattage W
Cat. No.
20
20
824.05.002
824.05.202
mers &
Fo r Tra n sf or
e
S w itch es se
Page 124
www.hafele.com
119
Smart Spaces
High Voltage Lighting
Semi recessed light
Finish
White
Cat. No.
826.16.723
Finish
White
Cat. No.
826.16.722
Chrome
826.16.223
Chrome
826.16.222
Satin-nickel
826.16.623
Satin-nickel
826.16.622
Packing: 1 piece
Note: Bulbs must be ordered separately
Packing: 1 piece
Semi recessed, anti-glare light
Surface mounted light
Finish
White
Cat. No.
826.16.720
Finish
White
Cat. No.
826.16.721
Chrome
826.16.220
Chrome
826.16.221
Satin-nickel
826.16.620
Satin-nickel
826.16.621
Packing: 1 piece
120
www.hafele.com
Packing: 1 piece
Smart Lighting
Recess flush mounted light
Smart Spaces
High Voltage Lighting
Rondo a semi-recessed mounted light
Quadro recess mounted light
Finish
White
Cat. No.
826.16.730
Finish
White
Cat. No.
826.16.744
Chrome
826.16.230
Chrome
826.16.244
Satin-nickel
826.16.630
Satin-nickel
826.16.644
Transparent
826.16.430
Packing: 1 piece
Packing: 1 piece
Finish
White
Cat. No.
826.16.745
Finish
White
Cat. No.
826.16.740
Chrome
826.16.245
Chrome
826.16.240
Satin-nickel
826.16.645
Satin-nickel
826.16.640
Packing: 1 piece
Smart Lighting
Rondo c flush mounted light
Rondo b semi-recessed mounted light
Packing: 1 piece
and
Fo r S w itch es
e
se
Po wer Le ads
24
Page 123 & 1
www.hafele.com
121
Smart Spaces
Accessories
Bulb options
Light disc - prisma flourescent tube 6W
• Voltage:
• Version:
230 V / 50-60 Hz
With GX 53 base
Cat. No.
826.16.990
826.16.991
826.16.996
Light colour
Warm white W830
Cool white W840
Day light W860
Packing: 1 piece
Light disc - opal flourescent tube 6W
• Voltage:
• Version:
230 V / 50-60 Hz
With GX 53 base
Cat. No.
826.87.791
826.87.790
826.16.992
Light colour
Warm white W830
Cool white W840
Day light W860
Packing: 1 piece
Light disc - led 2.7W
230 V / 50-60 Hz
With GX 53 base
Cat. No.
826.16.993
826.16.994
Light colour
Warm white 3500° K
Cool white 6400° K
Packing: 1 piece
Smart Lighting
Power leads
For single lights
NZ plug included
For up to 6 lights
Cat. No.
826.17.730
NZ plug included
If switching is required
Cat. No.
826.17.740
For up to 6 lights
NZ plug included
Cat. No.
826.17.750
se e
Fo r S w itch es
Page 124
122
www.hafele.com
• Voltage:
• Version:
Smart Spaces
Down Lighting
Down light
• Material:
•
•
•
•
Installation
Wall mounting using fixing rail,
angle adjustment with knurled nuts
Supplied with
T5 Bulb
On/Off switch
Mains lead 360 mm with mini plug
Fixing material
Set of installation instructions
Integrated electronic ballast
Length mm
450
Wattage
8
500
8
600
13
900
21
1200
28
Finish
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Cat. No.
826.77.001
826.77.901
826.77.002
826.77.902
826.77.003
826.77.903
826.77.004
826.77.904
826.77.005
826.77.905
Packing: 1 piece
Power leads
For single lights
NZ plug included
For up to 6 lights
Cat. No.
826.17.730
NZ plug included
If switching is required
Cat. No.
826.17.740
Fo r S w itch es
Page 124
For up to 6 lights
NZ plug included
Cat. No.
826.17.750
Smart Lighting
Order reference
Please order mains lead separately.
Aluminium light housing
Light cover frosted glass
Voltage:
230 V 50/60 Hz
Top and bottom light opening
Can be used as shelf, max. load bearing capacity 10 kg
Protection class II
Supply via mini plug system, 230 V
For wall mounting with fixing rail
se e
www.hafele.com
123
Smart Spaces
Transformers and Accessories
Halogen Transformers
Accessories
Door contact switch
• Input:
• Output:
• Dimensions:
240 V AC, 50 Hz
12 V AC, 20 - 60 VA
122 x 36 x 27 mm
Description
Cat. No.
Transformer
825.55.000
Lead and plug
825.55.006
Distributor block, 6 way
823.68.731
Packing: 1 piece
Cat. No.
230 V / 2 A
Recessed switch, 2 m lead
• Installation:
• Input:
• Version:
826.17.790
Packing: 1 piece
240 V AC, 50 - 60 Hz
Comes with 3 m lead with 3 pin plug and a
6 way distributor block
78 mm diameter cut-out
Finish
Cat. No.
White
826.51.710
Chrome
826.51.210
Satin-nickel
826.51.610
Loading
Output
Dimensions
(L x W x H) mm
Cat. No.
6 x 10 W or
3 x 20 W
10 - 60 W
12 V
169 x 45 x 16
825.72.730
12 x 10 W or
6 x 20 W
10 - 120 W
12 V
169 x 45 x 18
825.72.731
Smart Lighting
Packing: 1 piece
• Features:
Reduces installation depth 11.5 mm
Finish
Cat. No.
White
826.51.715
Chrome
826.51.215
Satin-nickel
826.51.615
Packing: 1 piece
Sensor switch
• Input:
• Version:
240 V AC, 50 - 60 Hz
Comes with 3 m lead with mini male plug
and a 6 way distributor block.
For use when switching ‘Halogen’ lights
pg 113-115
Loading
Output
Dimensions
(L x W x H) mm
Cat. No.
6 x 10 W or
3 x 20 W
10 - 60 W
12 V
169 x 45 x 16
825.72.720
12 x 10 W or
6 x 20 W
10 - 120 W
12 V
169 x 45 x 18
Packing: 1 piece
124
Spacer ring, 5.5 mm
www.hafele.com
825.72.721
Finish
Cat. No.
White
826.51.720
Chrome
826.51.220
Satin-nickel
826.51.620
Packing: 1 set
Packing: 1 piece
Smart Spaces
Strip Lighting
Extension leads
With 1 x female and 1 x male plug
Length mm
500
1000
2000
Cat. No.
830.75.361
830.75.362
830.75.363
Packing: 1 piece
Four way splitter
For joining up to 4 lengths to 1 driver
Cat. No.
830.75.365
Packing: 1 piece
Flexible SMD LED strip - waterproof
Wardrobe rail
5 mtr roll
• Version:
With receptacle for LED/RGB light
Material
Aluminium
Cat. No.
830.25.901
Packing: 2500 mm
Light Colour
Warm white
Cool white
Pure white
Green
Yellow
Blue
Red
Cat. No.
830.75.700
830.75.710
830.75.720
830.75.000
830.75.600
830.75.800
830.75.900
Packing: 5 metres
Transformer with 1.5 m lead to inline switch and
1.5 m to connector for 5 m length
Note: Please order light separately
Cable cover
• Installation:
Cable guide and cover
For clipping onto wardrobe rail
Material
Plastic
Cat. No.
830.25.991
Packing: 2500 mm
Rail end support
• Version:
For holding the wardrobe rail
With drill hole for connection lead
Material
Aluminium
Smart Lighting
• Features:
Decorative lighting on archways, ceilings,
edge lighting, backlighting for signage,
emergency exit lighting etc.
Runs on 12 V/DC car type battery or DC
transformer (see below)
Maintenance free with 3M adhesive tape
backing for easy installation
Shock and vibration resistant
Waterproof, long life 100,000 + hours
Low power consumption (24 watts)
Can be cut every 50 mm
Cat. No.
830.25.990
Packing: 1 piece
• Finish:
Use with strip lighting above 830.75. . .
Black
Cat. No.
830.75.990
Packing: 1 piece
Note: Transformer can run up to 1 x 5 metre strip
www.hafele.com
125
Smart Spaces
LED Lighting
Cabinet LED lights
Cabinet LED lights
• Light Body:
• Finish:
Cabinets and furniture
Plastic
Recess Mount: Ø26 mm drill hole
Surface Mount: Ø15 mm drill hole
Ø30 mm
Silver coloured
Lamp kit Set
Light colour
Warm white
Cool white
Cat. No.
830.88.000
830.88.010
Packing: 1 set
• Finish:
• Mounting:
• Size:
• Light body:
Kit Set includes
2 m lead with connector
3 LED lights, 1 watt each
Transformer
Distribution block
Mains lead with 2 pin plug
Cat. No.
830.20.930
Packing: 1 piece
Lamp only
Light colour
Warm white
Cool white
Cat. No.
830.88.070
830.88.075
Packing: 1 piece
Smart Lighting
• Features:
For use in cabinetry and furniture
applications, kitchen cabinets
Low power consumption 3 x 1 watt power
LED’s
140º degree spread
Outer ring: Plastic, silver coloured
Light body: Metal, silver coloured
Surface mount or recess mount
Recess mount: Ø66 mm drill hole
11 mm depth
Note: Brighter than 20 watt quartz halogen. To be used with
transformer below Cat No. 830.88.080.
Transformer
Includes
2 m lead with connector
Cabinet LED light
• Max wattage:
• Finish:
This transformer will power up to 3 LED
cabinet lamps Cat No. 830.20.930
9 watts
White
Cat. No.
830.88.080
• Material:
• Finish:
• Installation:
Packing: 1 piece
Housing: Aluminium
Pure white LED
Ø35 x 22 mm deep
Cat. No.
830.04.480
1 W LED
Packing: 1 piece
126
www.hafele.com
• Material:
• Size:
Smart Spaces
RAFIX-TAB 20 Connector Housing
• For timber thickness:
16 mm
Function
• The connector housing is pressed into the shelf and pushed onto
a RAFIX 7 mm diameter connecting bolt.
• The tapered surfaces of the connector housing ensure that the
connecting bolt is extremely tight.
• The catch prevents the shelf from “moving” upwards away from
the connecting bolt.
• For shelves and support panels the drop-down shelves can be
fastened using RAFIX TAB 20 alone.
• RAFIX carcase connectors can also be inserted into the shelves of
tall cabinets to prevent the side panels from “bulging out”.
1.2
Made of plastic
12.5
Colour
White
Brown
Black
8.8
22
Cat. No.
263.09.731
263.09.133
263.09.339
Smart Wardrobe, Laundry & Living
Mounting
24
Packing: 1000 pieces
1.5 x45
Made of plastic, flush with countersunk
Drilling distance
20
Drilling
depth
Drilling
depth
9.5
20
22.5
With countersunk edge for flush fitting
Advantages
• No protruding edges due to the countersunk edge in the
connector housing
• Shelves can be stacked without intermediate layers
For timber
thickness
mm
16
19
Colour
Cat. No.
Without
ridge
White
White
Black
263.50.703 263.52.703
263.50.705 263.52.705
263.50.305 –
Cat. No.
With ridge
Made of plastic, flush without countersunk
Drilling distance
Drilling depth
20
8.8
20
• Version:
Without countersunk
• Material:
Plastic
• For wood thickness: 16 mm
12.7+0.2
9.5
20
Finish
White
Cat. No.
263.50.723
For drilled hole Ø5 mm
• Material:
• Drive:
Thread length 7.5 mm
9
6.5
Ø7
7.5
Thread
Special thread
Zinc-alloy
PZ2 cross-slot
Finish
Galvanised
Cat. No.
263.20.131
Thread length 11 or 15 mm
• Material:
• Thread:
• Drive:
9
Steel
Special thread
PZ2 cross-slot and flat blade
Ø7
L
6.5
• Version:
Thread length L mm Finish
7.5
Galvanised
11
Galvanised
Cat. No.
263.20.936
263.20.847
www.hafele.com
127
The ISO14001 standard recognizes companies
that implement policies and procedures to help
minimize impact on our environment
Häfele NZ has recently received ISO 14001 certification.
As a company committed to global well-being and environmentally sound
practices we are proud to ensure our awareness and responsibility to the
sustainability of our environment.
In the printing of this book Häfele NZ have considered environmental
impact as one of our priorities. We have printed with
Soya based ink and chosen Sumo paper as it is an environmentally
responsible paper manufactured under the environmental
management system ISO14001 using ECE, (Elemental chlorine free) pulp from
a WMF (well managed forest) as opposed to a recycled coated stock that has a
high bleaching process. In the latter the carbon footprint is a factor, with
emissions and chemistry required for recycling. To eliminate huge amounts of
packaging we chose pallet wrapped rather than ream wrapped.
Enjoy this catalogue and remember – sustainability does count.
Waiheke Island, New Zealand
www.hafele.com
cover_final:Layout 1
12/8/09
1:35 PM
Page 1
Häfele Showrooms
SMART SPACES 2009
Smart Spaces
Häfele (N.Z.) Head Office
Eastern Design Centre
16 Accent Drive
East Tamaki
Auckland
P (09) 274 2040
F (09) 274 2041
info@hafele.co.nz
Auckland Design Centre
20 Beaumont Street
St Mary’s Bay
Auckland
P (09) 274 2530
F (09) 274 2531
architectural@hafele.co.nz
Wellington Design Centre
The Wool Store Level 1
262 Thorndon Quay
Wellington
P (04) 472 0294
F (04) 472 0295
wellington@hafele.co.nz
Christchurch Design Centre
5 Wigram Close
Sockburn
Christchurch
P (03) 343 8200
F (03) 343 8201
christchurch@hafele.co.nz
www.hafele.com • freephone 0800 4 HAFELE
732.WARDROBE
This catalogue is for the use of the recipient only. It remains in all respects the property of Häfele. Reproduction of this brochure in whole or in part, or the reproduction
of the illustrations as well as the copying of the layout, is strictly prohibited. All measurements given in this publication are not binding. Rights for design improvements
reserved. No responsibility for typographical or other errors occurring in the catalogue production. All deliveries made corresponding to Häfele sales conditions. August
2009. Copyright by Häfele. All rights reserved. Printed in New Zealand.
A COLLECTION OF QUALITY LIVING ACCESSORIES

Smart Spaces

Transcription

Similar documents

And So Much More - Peter Meier, Inc.

Home Entertainment