MDE-3807A The Advantage Series Pump and Dispenser

Transcription

The Advantage® Series
Pump & Dispenser Specifications
MDE-3807A
Computer Programs and Documentation
All Gilbarco Inc. computer programs (including software on diskettes and within memory chips) and documentation are copyrighted by, and shall remain the property of, Gilbarco
Inc. Such computer programs and documents may also contain trade secret information. The duplication, disclosure, modification, or unauthorized use of computer programs or
documentation is strictly prohibited, unless otherwise licensed by Gilbarco Inc.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly
approved by the manufacturer could void the user’s authority to operate this equipment.
Approvals
Gilbarco is an ISO 9001:2000 registered company.
Underwriters Laboratories:
New York City:
California Air Resources Board (CARB):
U. L. File#
Products listed with U. L.
NYFD C of A #
Product
Executive Order #
Product
MH1941
All Gilbarco pumps and dispensers that bear
the U.L. listing mark.
4805
The Advantage Series and
Legacy Series
G-70-52
G-70-150-AB
Balance Vapor Recovery
VaporVac
MH8467
E105106
Transac System 1000 and PAM 1000
Dell DHM Minitower
4986
Encore and Eclipse
E165027
G-SITE and Passport Systems
NCWM - Certificate of Compliance:
Gilbarco pumps and dispensers are evaluated by the National Conference of Weights and Measures (NCWM) under the National Type Evaluation Program (NTEP).
NCWM has issued the following Certificates of Compliance (COC):
COC#
Product
Model #
COC#
Product
Model #
COC#
Product
Model #
02-019
02-020
Eclipse
Encore
Exx
Nxx
02-026
H111B Series
MPD-1 Series
AC, RAC
AN, RAN
02-034
02-035
External Mount CRIND
Dimension
CECXXXXXXX
Dxx
T-12C Console
PA0188, RA0188
02-027
Fixed Blender
02-036
Legacy
Jxxx
T-12C Console
PA0203, RA0203
G-SITE Printer (Epson)
PA0307
T-12G Console
T-15 Console
PA0180, RA0180
PA0189
G-SITE Distribution Box
G-SITE Keyboard
PA0306
PA0304
T-15 Controller C2
T-15 Controller
PA0211
PA0190
G-SITE Mini Tower
G-SITE Monitor
PA0301
PA0303
ProBlender
Precision Blender
AU, RAU
AE, RAE
Dispenser - Standard
Dispenser - Low Profile
AK, RAK
AL, RAL
Fixed Blender
Meter - C Series
AP, RAF
PA024NC10
Meter - C Series
Salesmaker ProBlender
PA024TC10
AB, RAB
Salesmaker Series 2/2H/4/4A
AM
02-021
02-022
02-023
02-024
02-025
99-165
Dispenser - Low Profile
AF, RAF, AG,
RAG
AR, RAR
Indoor Card
Outdoor Card
Q11640
Q11891
CRIND
TS-1000 Console
—
PA0240
TS-1000 Controller
Distribution Box
PA0241
PA0242
02-038
G-SITE Printer (Citizen)
C+ Meter
PA0308
T19976
Micro-T Console
Meter - EC Series
PA0250
PA024EC10
02-039
02-040
Passport
Ecometer
PA0324
T20453
02-031
VaporVac Kits
The Advantage Series
CV
Bxx, RBxx
02-032
02-033
Trimline Series
Meter - C Series
AA, RAA
PA024XC10
MPD-A3 Series
AD, RAD
02-028
02-029
02-030
02-037
Patents
Gilbarco Inc. products are manufactured or sold under one or more of the following U.S. patents.:
Dispensers
4,566,504
4,556,927
4,570,686
4,687,033
4,728,788
4,748,846
4,781,066
4,793,589
4,799,940
4,805,453
4,876,653
4,890,210
4,913,813
4,930,665
4,934,565
4,938,054
4,938,251
4,939,730
4,967,366
4,978,029
4,986,445
5,013,434
5,029,100
5,040,577
5,083,846
5,098,179
5,099,403
5,110,010
5,134,548
5,156,199
5,269,353
5,228,084
5,325,706
5,345,979
5,355,915
5,363,988
5,384,850
5,407,115
5,417,256
5,448,638
5,561,715
5,450,883
5,452,750
5,464,466
5,493,315
5,501,246
5,514,933
5,515,390
5,535,130
5,542,458
5,543,849
5,546,981
5,557,084
5,571,310
5,592,979
5,602,745
5,561,715
5,602,745
5,626,649
5,630,528
5,708,580
5,719,779
5,719,781
5,720,325
5,724,067
5,734,851
5,755,854
5,782,275
5,794,667
5,798,931
5,803,136
5,843,212
5,857,500
5,868,179
5,871,651
5,890,520
5,898,141
5,954,080
5,956,259
5,969,691
5,971,042
5,979,705
5,980,090
5,992,395
5,996,888
6,026,866
6,026,868
6,032,126
6,052,629
6,054,940
6,062,473
6,065,507
6,065,638
6,067,476
6,070,156
6,073,840
6,078,888
6,078,896
6,082,415
6,085,775
6,087,954
6,092,410
6,098,879
6,102,085
6,116,505
6,119,110
6,123,118
6,149,033
6,157,871
6,170,539
6,176,421
6,184,846
6,185,307
6,185,893
6,196,065
6,227,227
6,244,310
6,250,151
6,253,779
6,263,319
6,275,746
6,296,148
6,302,165
6,313,737
6,325,112
6,326,934
6,336,479
6,338,369
6,347,649
6,352,176
6,357,493
6,360,137
6,363,299
6,364,206
RE35,238
D262,971
D265,092
D306,719
D309,144
D316,471
D413,124
D413,311
D413,336
D413,337
D413,610
D413,901
D413,902
D414,192
D414,501
D414,778
D414,779
D414,780
D414,781
D414,782
D415,166
D415,167
D415,168
D415,169
D415,170
D415,171
D415,172
D415,501
D415,777
D416,915
D416,916
D417,226
D418,523
D420,684
D421,612
D422,285
D422,604
D426,555
D428,424
D428,897
D429,739
D429,740
D432,140
D432,548
D432,552
D433,032
D433,033
D433,034
D433,035
D433,036
D433,037
D433,685
D433,686
D435,051
D440,579
D443,624
5,724,067
5,734,851
6,032,126
6,067,527
Point of Sale/Back Office Equipment
4,967,366
5,228,084
5,448,638
5,561,715
5,798,931
5,980,090
5,493,315
5,708,580
5,719,779
5,719,781
6,073,840
6,078,888
6,116,505
6,185,307
6,263,319
6,275,746
6,326,934
6,360,137
6,363,299
6,364,206
Additional U.S. and foreign patents pending.
Trademarks
Non-registered trademarks
Registered trademarks
C-PAM™
ECR™
G-SITE® Lite™
Highline™
Surge Management System™
Tank Monitor™
Dimension® Series
Gilbarco®
The Advantage® Series Eclipse ®
Transac ®
TRIND®
EMC™
G-CAT™
MultiLine™
Optimum™ Series
TCR™
Ultra-Hi™
InfoScreen®
Legacy®
Trimline®
VaporVac ®
Gilbert™
G-Poll™ Interface
PAM™ 1000
PAM™
ValueLine™
Making Things Better® G-SITE®
MPD®
Transac ® System 1000
SmartPad™
SMART Connect ™
GOLD®
Encore®
This document is subject to change without notice. · For information regarding Gilbarco Inc. Literature, call (336) 547-5661
E-mail: literature@gilbarco.com · Internet: http://www.gilbarco.com
 2004 Gilbarco Inc. · All Rights Reserved
Passport®
CRIND®
Additional U.S. and foreign trademarks
pending.
Performer®
InfoScreen®
Other brand or product names shown may be
trademarks or registered trademarks of their
respective holders.
Table of Contents
Table of Contents
The Advantage® MPD® Two-Grade, Three-Grade and Single-Hose Dispensers
Elevation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Foundation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
The Advantage MPD Four-Grade and Single Hose + 1 Dispensers
Foundation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
The Advantage MPD Two-Grade, Three-Grade and Four-Grade Pumps
Two-Grade and Three-Grade Pumps Foundation Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . .8
Four-Grade Pump Foundation Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
The Advantage Dual, Quad, and Super-Hi™ Dual Dispensers
Elevation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Foundation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
The Advantage Dual, Quad and Super-Hi™ Dual Pumps
The Advantage Fixed Blender Six-Hose Dispenser
Elevation Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
The Advantage Selectable Blender 36" Dispenser
The Advantage Selectable Blender 48" Dispenser
The Advantage Selectable Blender Pump
MDE-3807A The Advantage® Series Pump and Dispenser Specifications • January 2004
Page i
Metric Conversion Table
Metric Conversion Table
Inches
Millimeters
Inches
Centimeters
1/32
0.8
1
2.54 centimeters
1/16
1.6
2
5.08 centimeters
3/32
2.4
3
7.62 centimeters
1/8
3.2
4
10.2 centimeters
5/32
4.0
5
12.7 centimeters
3/16
4.8
6
15.2 centimeters
7/32
5.6
7
17.8 centimeters
1/4
6.4
8
20.3 centimeters
9/32
7.1
9
22.9 centimeters
5/16
7.9
10
25.4 centimeters
11/32
8.7
20
50.8 centimeters
3/8
9.5
30
76.2 centimeters
13/32
10.3
40
101.6 centimeters
50
127 centimeters
7/16
11.1
15/32
11.9
1/2
12.7
17/32
13.5
9/16
14.3
19/32
15.1
5/8
15.9
21/32
16.7
11/16
17.5
23/32
18.3
3/4
19.1
25/32
19.9
13/16
20.6
27/32
21.4
7/8
22.2
29/32
23.0
15/16
23.8
31/32
24.6
1
25.4
1" = 25.4mm
1mm = .03937"
Page ii
The Advantage® MPD® Two-Grade, Three-Grade and Single-Hose Dispensers Elevation Diagram
The Advantage® MPD® Two-Grade, Three-Grade and Single-Hose Dispensers Elevation
Diagram
(Models B02, B03, B04, B05, B84, and B85)
53-13/16"
31-5/16"
49-1/2"
21"
5-1/8"
9-1/2"
Canopy Option
42"
23-1/2"
95-3/16"
Detail A
94"
60-1/2"
16"
Two-Grade units do not have
the middle nozzle put-down.
24-1/2"
22"
21-1/4"
(Long
Nozzle Cradle)
21-1/2"
32-3/8"
Short Nozzle Cradles
36-1/8"
Long Nozzle Cradles
48"
(Short
22-1/2"
Nozzle Cradle)
(Medium
Nozzle Cradle)
Note:
Gilbarco VaporVac®
and some Balance Vapor Recovery units
use short nozzle cradles.
Detail A
InfoScreen™ and
Monochrome CRIND
Single-Line CRIND™
PRESS
53-1/2"
53-1/2"
Base
Base
Single-Hose units have nozzle
boot located on right side.
Screening Specifications
Lower Doors
Overall: 22.94" H x 49.74" W
Front Surface: 19.94" H x 42.25" W
Canopy Option
Side Surface: 9.5" H x 31.31" W
TD000326
Note: Measurements are in inches unless otherwise specified. See “Metric Conversion
Table” on page ii.
Page 1
Page 2
7
9 1/4
16
5
8
3 1/16
3 1/2
9 5/16
2 7/16
+0
-1/16
5 11/16
+0
-1/16
INSTALLER'S 1/2" CONDUIT &
UNILET BOX
(OVERHEAD SPEAKER ONLY)
OPENING/STUB-UP FOR 1/2" CONDUIT
(SPEAKER & CALL BUTTON)
18 1/2
INSTALLER'S 1/2" CONDUIT
(OVERHEAD SPEAKER & CALL BUTTON)
AUXILLARY JUNCTION BOX
(FOR OVERHEAD SPEAKER
& CALL BUTTON)
21 1/2
10 3/4
1" V/R ADAPTER
16 3/16
16
14 1/2
2 3/8
48
16 1/2
POWER JUNCTION BOX
FIELD J-BOX
16
2 1/2
9 1/4
33
42
FACING THE COVER OF J-BOXES
FRONT VIEW
21
24
1 X 1 1/2 LG
NIPPLE
TD000918
R19109
1" STANDARD ELBOW
INSTALLER'S 1" CONDUIT
1" CAPPED ELBOW (SUPPLIED)
1 X 2 3/8 LG NIPPLE
OPENING/STUB-UP FOR 1" CONDUIT
2 3/4
(3) 1 1/2 SUPPLY UNIONS
(4) 13/16 X 1 7/16 SLOTS FOR ANCHOR BOLTS
NOTES:
1 - INLET UNION HEIGHT SUCH TO ACCOMODATE A CUSTOMER
SUPPLIED DOUBLE-POPPIT SHEAR VALVE.
2 - DISREGARD CENTER PRODUCT FOR 2-GRADE WIDE FRAME UNITS.
The Advantage® MPD® Two-Grade, Three-Grade and Single-Hose Dispensers Foundation Diagram
The Advantage® MPD® Two-Grade, Three-Grade and Single-Hose Dispensers Foundation
Diagram
(Models B02, B03, B04, B05, B84, B85)
Note: Measurements are in inches unless otherwise specified. See “Metric Conversion Table”
on page ii..
The Advantage® MPD® Two-Grade, Three-Grade and Single-Hose Dispensers Foundation Diagram
Optional Conduit Locations (Models B02, B03, B04, B05, B84, B85)
Optional Conduit Locations
(See Standard Conduit Location drawing for all standard conduit locations.)
TOP VIEW
Main conduit 3/4" opening
(Alternate Column Location)
(using Kit K94389-01)
Aux. junction box
conduit 1/2" opening
(Used for call button option
with overhead speaker)
22-1/2"
Speaker conduit opening 1/2"
(Alternate Location See MDE-3415)
2-1/4"
1-17/32"
3-1/16"
22-1/2"
16-3/16"
A SIDE
Speaker Unilet Box
Aux.Junction Box
FRONT VIEW
Aux.Junction Box
FRONT J-BOX
SIDE VIEW OF COLUMN
Call Button Conduit
Speaker Conduit
Main Conduit
(3) 3/4" Capped Elbow
(supplied)
Speaker
Unilet Box
3-1/16"
Auxillary
Junction Box
16-7/10"
9-5/16"
FRONT
REAR
RIGHT VIEW
Using K94389-01
FRONT
REAR
LEFT VIEW
7"
REAR
FRONT
LEFT VIEW
See MDE-3415
TD000328
Table” on page ii..
Page 3
The Advantage® MPD® Four-Grade and Single Hose + 1 Dispensers Elevation Diagram
(Models B06, B07, B86, and B87)
53-13/16"
31-5/16"
21"
49-1/12"
5-1/8"
9-1/2"
Canopy Option
42"
23-1/2"
95-3/16"
Detail B
94"
88-7/8"
60-1/2"
16"
22"
Detail A
25-5/8"
21-1/2"
48"
32-3/8"
36-1/8"
Long Nozzle Cradles
Detail A
24-1/2"
21-1/4"
(Long
Nozzle Cradle)
Single-Hose + 1
(uses both
nozzle boots)
Single-Hose
(uses right hand
nozzle boot)
(Short
22-1/2"
Nozzle Cradle)
(Medium
Nozzle Cradle)
Note:
Gilbarco VaporVac®
Detail B
InfoScreen™ and
Monochrome CRIND
Lower Doors
Overall: 22.94" H x 49.74" W
PRESS
Canopy Option
53-1/2"
53-1/2"
Base
Base
TD000329
on page ii.
Page 4
7
9 1/4
16
5
8
3 1/2
3 1/16
LEFT SIDE VIEW OF COLUMS
9 5/16
2 7/16
+0
-1/16
5 11/16
UNILET BOX
18 1/2
10 3/4
21 1/2
& CALL BUTTON)
TOP VIEW
THIS INLET FOR 1-PROD UNIT
+0
-1/16
42
33
21
FIELD J-BOX
16
13
3 3/4
16 1/2
FRONT VIEW
24
16 3/16
14 1/2
6 1/8
2 3/8
13 5/8
48
POWER JUNCTION BOX
3
RIGHT SIDE VIEW OF COLUMS
TD000919
R19326
8 9/16
1" INSTALLER'S CONDUIT
3/4 UNION (SUPPLIED)
OPENING/STUB-UP FOR 3/4 CONDUIT
(4) 13/16 X 1 7/16 SLOTS
FOR ANCHOR BOLTS
1" V/R ADAPTER
The Advantage® MPD® Four-Grade and Single-Hose Dispensers Foundation Diagram
(Models B06, B07, B86 and B87))
Page 5
Optional Conduit Locations (Models B06, B07, B86 and B87)
TOP VIEW
Aux. junction box
22-1/2"
2-1/4"
1-17/32"
3-1/16"
22-1/2"
16-3/16"
A SIDE
Speaker Unilet Box
Aux.Junction Box
FRONT VIEW
Aux.Junction Box
FRONT J-BOX
SIDE VIEW OF COLUMN
Call Button Conduit
Speaker Conduit
Main Conduit
(supplied)
Speaker
Unilet Box
3-1/16"
Auxillary
Junction Box
16-7/10"
9-5/16"
FRONT
REAR
RIGHT VIEW
Using K94389-01
FRONT
REAR
LEFT VIEW
7"
REAR
FRONT
LEFT VIEW
See MDE-3415
TD000331
on page ii.
Page 6
The Advantage MPD® Two-Grade, Three-Grade and Four-Grade Pumps Elevation Diagram
The Advantage MPD® Two-Grade, Three-Grade and Four-Grade Pumps Elevation
Diagram
(Models B12, B13, B14, B15 and B17)
53-13/16"
31-5/16"
21"
49-1/2"
5-1/8"
9-1/2"
Canopy Option
Detail A
95-3/16"
94"
62-1/2"
16"
22"
48"
(50'' for Four-Grade Pump)
Note:
Three-Grade Pump shown.
All dimensions for all grades
the same except as noted
for Four-Grade Pump.
21-1/2"
32-3/8"
36-1/8"
Long Nozzle Cradles
33"
Four-Grade Extended
Lower Panel (Door)
26-1/2"
(Short
24-1/2"
(Medium Nozzle Cradle)
(Long
Nozzle Cradle)
Nozzle Cradle)
23-1/4"
Note:
Gilbarco VaporVac¨
Detail A
InfoScreenª and
Monochrome CRIND
Single-Line CRINDª
PRESS
55-1/2"
55-1/2"
Base
Base
Lower Doors
Overall: 22.94" H x 49.74" W
Canopy Option
TD000134
Page 7
The Advantage MPD® Two-Grade and Three-Grade Pumps Foundation Diagrams
(Models B12, B13, B14 and B15)
Standard Conduit Locations
(See Optional Conduit Location drawing for column conduit locations and call button option locations.)
TOP VIEW
48"
24"
1" Vapor recovery adapter
hole location.
41-3/4"
20-7/8"
Slot dimensions for
front & back anchor bolts.
(4) 13/16" x 1-7/16"
33"
16-1/2"
10-3/4"
21-1/2"
9-1/4"
7-7/8"
7-11/32" 6"
18-1/2" 15-3/4"
POSITION
'B'
POSITION
'A'
POSITION
'C'
1-3/16"
1-3/16"
5-5/8"
10-11/16"
Supply union (3) 1-1/2"
17/32"
15-25/32"
15-25/32"
Main conduit
1" opening
18-13/16"
18-23/32"
FRONT VIEW
Speaker Unilet Box
Vapor Recovery Adaptor
Main Junction Box with main conduit
13-11/16"
FRONT J-BOX
1-1/16"
SIDE VIEW OF COLUMN
Main Conduit
1-1/16"
Speaker Conduit
1" Capped Elbow
(supplied)
11"
Speaker
Unilet Box
13-11/16"
REAR
FRONT
Supply union
REAR
FRONT
RIGHT VIEW
LEFT VIEW
PRODUCT INLET LOCATIONS
THREE-GRADE,
THREE-GRADE SINGLE-HOSE
A
B
C
POSITION
INLET FROM TANK A
INLET FROM TANK B
INLET FROM TANK C
FUNCTION
3-GRADE, 3-HOSE - B14, BG4
3-GRADE, 6-HOSE - B15, BG5
3-GRADE, 1-HOSE - BP4
3-GRADE, 2-HOSE - BP5
TWO-GRADE
A
B
C
POSITION
INLET FROM TANK A
NOT USED
INLET FROM TANK C
FUNCTION
2-GRADE, 2-HOSE - B02
2-GRADE, 4-HOSE - B03
S0000217
on page ii.
Page 8
TOP VIEW
Aux. junction box
10-11/16"
7-1/4"
Aux. junction box
FRONT VIEW
Aux. junction box
FRONT J-BOX
7-5/8"
SIDE VIEW OF COLUMN
Call Button Conduit
Aux. junction box
7-5/8"
7-1/4"
FRONT
REAR
LEFT VIEW
S0000218
Page 9
The Advantage MPD® Four-Grade Pump Foundation Diagrams
The Advantage MPD® Four-Grade Pump Foundation Diagrams
(Model B17)
TOP VIEW
48
24
42
21
33
16 1/2
1/2" SPEAKER CONDUIT
8
9 1/4
13 1/8
12 3/8
7/8
1 15/16
6 3/16
16
18 1/2
21 1/2
10 3/4
14 3/8
18
18 15/16
OPENING FOR 1" CONDUIT
(4) 1-1/2 SUPPLY UNIONS
(4) 13/16 X 1-7/16 SLOTS FOR ANCHOR BOLTS
13 3/8
REF
+0
-1/16
1 1/16
5 1/2
POWER JUNCTION BOX
SIDE VIEW OF COLUMN
INSTALLER'S 1/2" SPEAKER CONDUIT
(FOR OVERHEAD SPEAKER)
on page ii.
Page 10
The Advantage® Dual, Quad, and Super-Hi™ Dual Dispensers Elevation Diagram
The Advantage® Dual, Quad, and Super-Hi™ Dual Dispensers Elevation Diagram
(Models B20, B21, BD0, BD1, B42, and B43)
41-13/16"
31-5/16"
21"
37-1/4"
5-1/8"
9-1/2"
Canopy Option
95-3/16"
Detail A
94"
60-1/2"
16"
22"
22-1/2"
21-1/4"
(Long
Nozzle Cradle)
21-1/2"
32-3/8"
36-1/8"
Long Nozzle Cradles
36"
The Advantage® Dual and
Super-Hi™ flow units
are less left Put-down and
PPU module
24-1/2"
(Short
Nozzle Cradle)
(Medium
Nozzle Cradle)
Note:
Gilbarco VaporVac®
Detail A
InfoScreen™ and
Monochrome CRIND
PRESS
53-1/2"
53-1/2"
Base
Base
Lower Doors
Overall: 22.94" H x 37.74" W
Canopy Option
Page 11
Page 12
7
3 1/16
9 5/16
2 7/16
+0
-1/16
5 11/16
UNILET BOX
& CALL BUTTON)
5
3 1/2
18 1/2
9 1/4
1" V/R ADAPTER
+0
-1/16
10
FIELD J-BOX
30
10
10 1/2
15
3 1/4
2 3/4
8
10 3/4
21 1/2
1 X 1 1/2 LG NIPPLE
TD000920
R19348
1" STANDARD ELBOW
16
POWER JUNCTION BOX
FRONT VIEW
10 3/16
8 1/2
18
21
36
1 - INLET UNION HEIGHT IS SUCH TO ACCOMODATE A CUSTOMER
NOTES:
1 X 2 3/8 LG NIPPLE
The Advantage® Dual, Quad and Super-Hi™ Dual Dispensers Foundation Diagram
(Models B20, B21, BD0, BD1, B42 and B43)
on page ii.
Optional Conduit Locations (Models B20, B21, BD0, BD1, B42 and B43)
TOP VIEW
Aux. junction box
3-1/16"
POSITION
'A'
POSITION
'B'
LEFT
VIEW
10-3/16"
Aux.junction box
Aux. junction box
FRONT VIEW
FRONT J-BOX
SIDE VIEW OF COLUMN
Call Button Conduit
3-1/16"
Aux. junction box
7"
REAR
FRONT
LEFT VIEW
Page 13
The Advantage® Dual, Quad and Super-Hi™ Dual Pumps Elevation Diagram
The Advantage® Dual, Quad and Super-Hi™ Dual Pumps Elevation Diagram
(Models B30, B31, BE0, BE1, B52, and B53)
41-13/16"
31-5/16"
21"
37-1/4"
5-1/8"
9-1/2"
Canopy Option
95-3/16"
Details A and B
94"
62-1/2"
Dual and Super-Hi
units have no left
nozzle boot
16"
22"
21-1/2"
32-3/8"
36-1/8"
Long Nozzle Cradles
36"
Detail A
24-1/2"
23-1/4"
(Long
Nozzle Cradle)
26-1/2"
(Short
Nozzle Cradle)
(Medium
Nozzle Cradle)
Note:
Gilbarco VaporVac®
Detail A
InfoScreen™ and
Monochrome CRIND
Advantage International Quad
PRESS
Note:
Advantage International units use
centralized PPUs (effective August 1998).
55-1/2"
55-1/2"
Base
Base
Lower Doors
Overall: 22.94" H x 37.74" W
Canopy Option
S0000219
on page ii.
Page 14
The Advantage® Dual, Quad and Super-Hi™ Dual Pumps Foundation Diagram
(Models B30, B31, B52 and B53)
TOP VIEW
Speaker conduit
opening 1/2"
36"
18"
29-3/4"
14-7/8"
1" Vapor recovery
adapter hole location
Slot dimensions for
(4) 13/16" x 1-7/16"
21"
10-1/2"
10-3/4" 9-1/4"
7-7/8" 7-1/4"
6"
15-3/4"
21-1/2"
18-1/2"
POSITION
'B'
1-3/16"
POSITION
'A'
1-3/16"
5-5/8"
2-11/16"
8-29/32"
Supply union (1 or 2)
1-1/2"
8-29/32"
12-13/16"
12-23/32"
FRONT VIEW
Main conduit
1" opening
Speaker Unilet Box
FRONT J-BOX
7-5/16"
1-1/16"
POSITION 'A'
POSITION 'B'
1-1/16"
SIDE VIEW OF COLUMN
Speaker Conduit
Main Conduit
Speaker
Unilet Box
1" Capped Elbow
(supplied)
11"
7-5/16"
REAR
FRONT
RIGHT VIEW
REAR
LEFT VIEW
FRONT
TOP VIEW OF MODEL CONFIGURATIONS
DUAL PUMP
G1
SUPER-HI™ DUAL PUMP
G2
SIDE B
POSITION
'A'
POSITION
'B'
SIDE A
QUAD PUMP
G1
SIDE B
POSITION
POSITION
'B'
'A'
G1
G1
SIDE B
G2
POSITION
POSITION
'A'
'B'
G1
SIDE A
G2
SIDE A
DUAL PUMP
A
B
POSITION
INLET FROM TANK A
NOT USED
FUNCTION
B30 1-GRADE, 1-HOSE, 1-SIDE
(Uses position 'A')
A
B
POSITION
INLET FROM TANK A
INLET FROM TANK A
FUNCTION
BE0 1-GRADE, 1-HOSE, 1-SIDE
(Uses position 'B')
NOTE: NUMBER OF HOSES LISTED ARE PER GRADE, PER SIDE.
QUAD PUMP
INLET FROM TANK A
INLET FROM TANK B
A
B
POSITION
FUNCTION
(Uses position 'A and B')
S0000221
Page 15
Optional Conduit Locations (Models B30, B31, B52 and B53)
TOP VIEW
Aux.junction box
2-11/16"
POSITION
'B'
7-1/4"
POSITION
'A'
Aux. junction box
FRONT VIEW
Aux. junction box
FRONT J-BOX
7-5/16"
SIDE VIEW OF COLUMN
Call Button Conduit
Aux. junction box
7-5/16"
7-1/4"
REAR
FRONT
LEFT VIEW
S0000222
on page ii.
Page 16
The Advantage® Fixed Blender Six-Hose Dispenser Elevation Diagrams
The Advantage® Fixed Blender Six-Hose Dispenser Elevation Diagrams
(Models B64 and B65)
53-13/16"
31-5/16"
49-1/12"
5-1/8"
21"
9-1/2"
Canopy Option
42"
23-1/2"
95-3/16"
Detail B
94"
88-7/8"
601/2"
16"
22"
25-5/8"
Detail A
25-1/4"
21-1/2"
32-3/8"
36-1/8"
Long Nozzle Cradles
48"
Detail A
21-1/4"
(Long
Nozzle Cradle)
22-1/2"
Detail B
InfoScreen™ and
Monochrome CRIND
24-1/2"
(Short
Nozzle Cradle)
(Medium
Nozzle Cradle)
PRESS
Note:
Gilbarco VaporVac®
53-1/2"
53-1/2"
Base
Base
Lower Doors
Overall: 22.94" H x 49.74" W
Canopy Option
Page 17
Page 18
7
(OVERHEAD SPEAKER &
CALL BUTTON)
& CALL BUTTON)
21 1/2
10 3/4
16
5
8
3 1/2
3 1/16
9 5/16
2 7/16
+0
-1/16
5 11/16
UNILET BOX
18 1/2
9 1/4
1" V/R ADAPTER
+0
-1/16
FIELD J-BOX
21
13 1/16
N23327
(BLUE TAG)
LOW PRODUCT
42
7 5/8
16 1/2
FRONT VIEW
24
14 1/2
16 3/16
7 5/8
2 3/8
33
48
N23328
(WHITE TAG)
HIGH PRODUCT
POWER JUNCTION BOX
OPENING/STUB-UP FOR 3/4 CONDUIT
3 1/16
TD000921
R19447
8 9/16
3/4” UNION (SUPPLIED)
3/4 UNION (SUPPLIED)
NOTES:
1 - INLET UNION HEIGHT IS SUCH TO ACCOMODATE A CUSTOMER SUPPLIED
DOUBLE-POPPIT SHEAR VALVE.
The Advantage® Fixed Blender Six-Hose Dispenser Foundation Diagram
(Models B64 and B65)
on page ii.
Optional Conduit Locations (Models B64 and B65)
TOP VIEW
Aux. junction box
22-1/2"
2-1/4"
1-17/32"
3-1/16"
22-1/2"
16-3/16"
Speaker Unilet Box
Aux.Junction Box
FRONT VIEW
Aux.Junction Box
FRONT J-BOX
SIDE VIEW OF COLUMN
Call Button Conduit
Speaker Conduit
Main Conduit
(supplied)
Speaker
Unilet Box
3-1/16"
Auxillary
Junction Box
16-7/10"
9-5/16"
FRONT
REAR
RIGHT VIEW
Using K94389-01
FRONT
REAR
LEFT VIEW
7"
REAR
FRONT
LEFT VIEW
See MDE-3415
Page 19
The Advantage® Selectable Blender 36" Dispenser Elevation Diagram
(Models B78, B7A, B7E, B7G, B7K, and B7N)
41-13/16"
31-5/16"
21"
37-1/4"
5-1/8"
9-1/2"
Canopy Option
95-3/16"
Detail B
94"
62"
42-1/4"
27-1/4"
16"
Detail A
22"
25-1/4"
22"
32-3/8"
36-1/8"
Long Nozzle Cradles
36"
Detail B
InfoScreen™ and
Monochrome CRIND
Detail A
24-1/4"
(Long
Nozzle Cradle)
PRESS
53-1/2"
53-1/2"
Base
Base
22-1/2"
24-1/2"
(Short
Nozzle Cradle)
(Medium
Nozzle Cradle)
Note:
Gilbarco VaporVac®
Lower Doors
Overall: 22.94" H x 37.74" W
Canopy Option
on page ii.
Page 20
7
& CALL BUTTON)
21 1/2
16
5
8
3 1/16
1 11/16
18 1/2
9 1/4
4 7/16
9 5/16
5 11/16
2 7/16
+0
-1/16
+0
-1/16
1 1/16
UNILET BOX
10 3/4
VAPOR SHEAR VALVE LOCATION
WHEN USING MOUNTING BRACKET
KIT K96576-01
+0
-1/16
10
10
3 1/4
10 1/2
36
2
2 3/8
1 X 1 1/2 LG
NIPPLE
HIGH PRODUCT
3 1/2
TD000923
R19471
8 9/16
9 1/4
1" INSTALLER'S CONDUIT
1 X 2-3/8 LG. NIPPLE
1" STANDARD ELBOW
2 3/4
1" V/R ADAPTER
(STANDARD LOCATION)
POWER JUNCTION BOX
FRONT VIEW
LOW PRODUCT
10 3/16
21
30
8 1/2
15
18
2 DIMENSION IS TO TOP OF VAPOR SHEAR VALVE (NOT SHOWN).
1 - INLET UNION HEIGHT SUCH TO ACCOMODATE A CUSTOMER
NOTES:
The Advantage® Selectable Blender 36" Dispenser Foundation Diagram
(Models B78, B7A, B7E, B7G, B7K, and B7N)
Page 21
Optional Conduit Locations (Models B78, B7A, B7E, B7G, B7K, and B7N)
TOP VIEW
Aux. junction box
3-1/16"
POSITION
'A'
POSITION
'B'
LEFT
VIEW
10-3/16"
Aux.junction box
FRONT VIEW
Aux. junction box
FRONT J-BOX
SIDE VIEW OF COLUMN
Call Button Conduit
3-1/16"
Aux. junction box
7"
REAR
FRONT
LEFT VIEW
on page ii.
Page 22
(B79, B7B, B7C, B7D, B7F, B7H, B7I, B7J, B7L, B7M, B7O and B7P)
53-13/16"
31-5/16"
21"
49-1/12"
5-1/8"
9-1/2"
Canopy Option
42"
23-1/2"
95-3/16"
Detail B
94"
88-7/8"
60-1/2"
42-1/4"
16"
22"
Detail A
25-5/8"
21-1/2"
32-3/8"
36-1/8"
Long Nozzle Cradles
48"
Detail B
InfoScreen™ and
Monochrome CRIND
25-1/4"
PRESS
53-1/2"
53-1/2"
Base
Base
A side
Detail A
24-1/2"
(Short
22-1/2"
Nozzle Cradle)
(Medium
Nozzle Cradle)
(Long
Nozzle Cradle)
21-1/4"
Lower Doors
Overall: 22.94" H x 49.74" W
B side
Configuration example:
Model - x+ 0, symmetrical, hose left
Note:
Gilbarco VaporVac®
Canopy Option
Page 23
Page 24
7
5
3 1/16
3 1/2
18 1/2
9 1/4
9 5/16
INSTALLER'S 1/2"
CONDUIT (OVERHEAD
SPEAKER & CALL BUTTON)
AUXILLARY JUNCTION
BOX (FOR OVERHEAD
SPEAKER & CALL
BUTTON)
2 7/16
+0
-1/16
5 11/16
+0
-1/16
FRONT VIEW
24
16 3/16
16
14 1/2
2 3/8
UNILET BOX
21 1/2
10 3/4
1" V/R ADAPTER
9 1/4
2 1/2
16
16 1/2
21
FIELD J-BOX
16
1 X 1 1/2 LG
NIPPLE
ON X+1 MODELS
(STRAIGHT PRODUCT)
THIS INLET FOR +1
1' STANDARD ELBOW
2 3/4
8
DOUBLE-POPPIT SHEAR VALVE.
HIGH PRODUCT
LOW PRODUCT
42
33
48
1 - INLET UNION HEIGHT IS SUCH TO ACCOMODATE A CUSTOMER SUPPLIED
NOTES:
TD000922
R19463
9 1/4
INSTALLER'S CONDUIT
1 X 2 3/8 LG. NIPPLE
(B79, B7B, B7C, B7D, B7F, B7H, B7I, B7J, B7L, B7M, B7O and B7P)
on page ii.
Optional Conduit Locations (B79, B7B, B7C, B7D, B7F, B7H, B7I, B7J, B7L,
B7M, B7O and B7P)
TOP VIEW
Aux. junction box
22-1/2"
2-1/4"
3-1/16"
16-3/16"
Speaker Unilet Box
Aux.Junction Box
FRONT VIEW
Aux.Junction Box
FRONT J-BOX
SIDE VIEW OF COLUMN
Call Button Conduit
Speaker Conduit
Speaker
Unilet Box
3-1/16"
9-5/16"
REAR
FRONT
LEFT VIEW
Auxillary
Junction Box
7"
REAR
FRONT
LEFT VIEW
See MDE-3415
Page 25
The Advantage® Selectable Blender Pump Elevation Diagram
The Advantage® Selectable Blender Pump Elevation Diagram
(Models BAE, BA8, BAN, BAK, BAG, and BAA)
41-13/16"
31-5/16"
21"
37-1/4"
5-1/8"
9-1/2"
Canopy Option
95-3/16"
Detail B
94"
64"
46-1/4"
29-1/4"
16"
Detail A
22"
25-1/4"
22"
32-3/8"
36-1/8"
Long Nozzle Cradles
36"
Detail B
InfoScreen™ and
Monochrome CRIND
Detail A
25-1/4"
(Long
Nozzle Cradle)
PRESS
55-1/2"
55-1/2"
Base
Base
26-1/2"
28-1/2"
(Short
Nozzle Cradle)
(Medium
Nozzle Cradle)
Note:
Gilbarco VaporVac®
Lower Doors
Overall: 22.94" H x 37.74" W
Canopy Option
S0000225
on page ii.
Page 26
The Advantage® Selectable Blender Pump Foundation Diagram
(Models BAE, BA8, BAN, BAK, BAG, and BAA)
TOP VIEW
Speaker conduit
opening 1/2"
36"
18"
29-3/4"
14-7/8"
1" Vapor recovery
adapter hole location
Slot dimensions for
(4) 13/16" x 1-7/16"
21"
10-1/2"
10-3/4" 9-1/4"
7-7/8" 7-1/4"
6"
15-3/4"
21-1/2"
18-1/2"
POSITION
'B'
1-3/16"
POSITION
'A'
1-3/16"
5-5/8"
2-11/16"
8-29/32"
12-13/16"
Position A = low product
Position B = high product
FRONT VIEW
Supply union (1 or 2)
1-1/2"
8-29/32"
12-23/32"
Main conduit
1" opening
Speaker Unilet Box
FRONT J-BOX
7-5/16"
1-1/16"
POSITION 'A'
POSITION 'B'
1-1/16"
SIDE VIEW OF COLUMN
Speaker Conduit
Main Conduit
Speaker
Unilet Box
1" Capped Elbow
(supplied)
11"
7-5/16"
REAR
FRONT
RIGHT VIEW
REAR
LEFT VIEW
FRONT
TOP VIEW OF MODEL CONFIGURATIONS
DUAL PUMP
G1
G2
SIDE B
POSITION
POSITION
'B'
'A'
SIDE A
QUAD PUMP
G1
SIDE B
POSITION
POSITION
'B'
'A'
G1
G1
SIDE B
G2
POSITION
POSITION
'B'
'A'
G1
SIDE A
G2
SIDE A
DUAL PUMP
A
B
POSITION
INLET FROM TANK A
NOT USED
FUNCTION
(Uses position 'A')
A
B
POSITION
INLET FROM TANK A
INLET FROM TANK A
FUNCTION
(Uses position 'B')
NOTE: NUMBER OF HOSES LISTED ARE PER GRADE, PER SIDE.
QUAD PUMP
INLET FROM TANK A
INLET FROM TANK B
A
B
POSITION
FUNCTION
(Uses position 'A and B')
S0000221
Page 27
Optional Conduit Locations (Models BAE, BA8, BAN, BAK, BAG, and BAA)
TOP VIEW
Aux.junction box
2-11/16"
POSITION
'B'
7-1/4"
POSITION
'A'
Aux. junction box
FRONT VIEW
Aux. junction box
FRONT J-BOX
7-5/16"
SIDE VIEW OF COLUMN
Call Button Conduit
Aux. junction box
7-5/16"
7-1/4"
REAR
FRONT
LEFT VIEW
S0000222
on page ii.
Page 28
© 2004 Gilbarco Inc.
7300 West Friendly Avenue • Post Office Box 22087
Greensboro, North Carolina 27420
Phone (336) 547-5000 • http://www.gilbarco.com • Printed in the U.S.A.

MDE-3807A The Advantage Series Pump and Dispenser

Transcription

Similar documents

accessories

PT-1810 MPD® Series Illustrated Parts Manual

Buckeye Health Plan

Oasis Graphics Catalog

Page 1 NY026466_HIX_FOR_CHI ©WellCare 2014 NY_06_14