Stainless steel sinks

Transcription

Stainless steel sinks
STAINLESS STEEL SINKS
Stainless Steel
Topmount, Undermount & Apron Front
Properties
Stainless Steel remains the most popular medium for kitchen sink production. It’s not
difficult to realise when you consider it’s main attributes:
Heat Resistant
Stainless Steel is highly heat resistant, so much so that hot pans straight from the stove can
rest safely on the sink - a highly useful thing when juggling the pasta.
Hygienic
A totally non-porous surface that is easy to keep clean and consequently more hygienic.
Impact Resistant
Stainless Steel is the most forgiving material for impact and is the least likely material to
damage your best china or glassware whilst remaining unscathed itself.
Care and Cleaning
Bleach/Chlorides
These are found in almost all cleaning solutions and detergents and if left on the sinks for
long periods can be damaging. They are water soluble, however, if you rinse away residues
after each use. A weekly clean with a stainless steel cleaner is all that is needed to keep
your sink looking bright and shiny.
Scratches
Like most metallic finishes, your stainless steel sink will scratch. Don’t worry, these are
simply usage marks that will eventually blend into the overall finish of the sink.
Water Quality
The quality of your water can affect the appearance of your sink. When water has a high
iron content a brown stain can form on the surface giving the appearance of rust. Remove
mineral deposits and scaling by soaking in a solution of 3 parts hot water and 1 part white
vinegar, and then dry it with a soft cloth to prevent further limescale build-up.
Plastic Washing-up Bowls
It is not advisable to use a washing-up bowl as they tend to pick up grit particles and the
bottom of the bowl can act like sandpaper leaving an area of concentrated tiny scratches.
Instead try using a wire basket, these are available with most models.
6
Finishes
Linen Finish
woven effect
giving an attractive
lustre that is
excellent at withstanding scratches..
Micro-Linen Finish
fine woven effect
that is more resistant
to scratches than the
standard finishes.
Brushed Finish
distinctive grained
finish that is ideal
for matching with
stainless steel
appliances.
Satin Finish
even soft silk finish.
Polished Finish
shimmering
reflective quality.
year
Topmount
Undermount
Apron Front
This installation requires the
sink to be mounted into the
worktop from the top.
This installation type is
suitable for all types of worktop including laminated
chipboard.
This installation requires the
sink to be fitted to the
worktop from the underside.
This installation type is only
suitable for solid surface
worktops such as Granite,
Marble or Wood.
This installation requires the
sink to be fitted directly on
to a cabinet with its front
fascia exposed.
This installation type is only
suitable for solid surface
worktops such as Granite,
Marble or Wood.
Icecool Page 10 - 11
Breeze Page 12 - 13
Okio 85 Page 14
Deep Blue Page 15
Mistral Page 17
Aria Page 22
Glacier Page 18 - 19
Maui Page 23
Arlington Page 25
Manhattan Page 26
Frame Page 28 - 29
Adelphi Page 30
Sapphire Page 14
Precision Page 16
Mirage Page 20 - 21
Oakland Page 24
Okio Page 27
Ocean Page 31
Stainless Steel
Sink Cleaner
Ref. 1056368 £12
7
Topmount
warranty
Stainless Steel
20
Topmount
Stainless Steel
Stainless Steel
Topmount & Lay-On
Duetta Page 32
Wing Page 32
Eclipse Page 33
Saturn Page 33
Oboe Page 32
Vault Page 34 - 35
Roma Page 36
Pella Page 37
Sparta Page 37
Arco Page 39
Centroval P39
Prep Sink Page 39
Contract Shallow Bowl Page 40
Contract Lay-On Page 41
8
E33 Page 36
Pio Bar Page 37
Star Page 36
Stereo Page 38
Mini Page 39
Contract Topmount Page 40
Contract DBSD Lay-On Page 41
Silver Star Page 33
Contract DBSD Topmount Page 40
Waterstation Page 42 - 43
Topmount
Topmount
Undermount
Apron Front
This installation requires the
sink to be mounted into the
worktop from the top.
This installation type is
suitable for all types of worktop including laminated
chipboard.
This installation requires the
sink to be fitted to the
worktop from the underside.
This installation type is only
suitable for solid surface
worktops such as Granite,
Marble or Wood.
This installation requires the
sink to be fitted directly on
to a cabinet with its front
fascia exposed.
This installation type is only
suitable for solid surface
worktops such as Granite,
Marble or Wood.
Salsa Page 44 - 45
Tango Page 49
Stages Page 54 - 55
Trough Page 59
Stereo Page 46 - 47
Just Page 50
Stark Page 48
Icerock Page 51 - 53
8 Degrees Page 56 - 57
Profi Star
Page 60 - 61
Belfast Page 62
Poise Page 58
Purismo Star Page 63
9
Stainless Steel
Undermount & Apron Front
Stainless Steel
Topmount
Icecool with Stainless Steel Drainer and Plate Rack
Icecool with Glass Chopping Board
ACCESSORIES
Icecool IC1000 with Stainless Steel Colander and Glass Chopping Board
Stainless Steel Colander
Zero radius design
Ref. COL103 £84
Stainless Steel Drainer
Ref. DB02 £29
Stainless Steel Colander
25mm radius design
Ref. COL105 £53
Glass Chopping Board
Fits bowl or drainer
Ref. GBD400 £30
10
Stainless Steel
Plate Rack
Ref. DB03 £25
Topmount
These very sophisticated hand finished sinks are our most
geometrically shaped models and have been planned with
aesthetics and practicality in mind. They feature zero radius bowls
with recessed drainers that help contain spills and have specially
designed accessories that help with food preparation. They are
brushed to a lustrous grain finish and their underside is coated
with a sound absorbing rubberised paint that keeps them quiet
when in use as well as adding strength to the robust 1.2mm
stainless steel. They can be fitted as Topmount or Flushmount.
Overflow Detail
Topmount Profile
Finish: Brushed
Mats
See page 268
Flushmount Profile
Tap Packs Page 253.
Icecool IC2000 with Stainlees Steel Colander and Glass Chopping Board. Tap KWC Ono page 166
Icecool Single bowl and drainer
Ref. IC1000L LH Drainer £498
Ref. IC1000R RH Drainer £498
Installation: Topmount or Flushmount
Overall size: 990/525 mm
Bowl size: 500/400/225 mm
Cut-Out size: 975/510 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: 1- handed
Steel gauge: 1.2 mm
Icecool 1.5 bowl and drainer
Ref. IC2000L LH Drainer £529
Ref. IC2000R RH Drainer £529
Installation: Topmount or Flushmount
Overall size: 990/525 mm
Bowl size: 340/400/225 mm
Half bowl: 180/400/160 mm
Cut-Out size: 975/510 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: 1- handed
Steel gauge: 1.2 mm
11
Stainless Steel
ICECOOL
Stainless Steel
Topmount
Breeze BR1000 with Stainless Steel Colander.
Tap Clearwater Sonatina see page 201.
BREEZE
ACCESSORIES
The Breeze has really useful accessories that add great versatility
including tailor made steel colanders that suspend on the sink’s
profile making them great for draining or rinsing food. There is
also a perforated bowl tray which acts as a secondary drainer and
also houses the smart plate rack.
Stainless Steel Colander
Zero radius design
Ref. COL103 £84
Stainless Steel Colander
25mm radius design
Ref. COL105 £53
Glass Chopping Board
Fits bowl or drainer
Ref. GBD400 £30
12
Stainless Steel Bowl Drainer
Ref. DB02 £29
Stainless Steel Plate Rack
Ref. DB03 £25
Stainless Steel Basket
Ref. DS04 (BR800/BR2000) £29
Ref. DS05 (BR1000) £29
Topmount
The Breeze has sleek modern lines with generously deep bowls
all at an affordable price making it one of our most popular sinks.
The 25mm radius bowls add to this sink’s modernity which also
match very well with the purpose designed accessories. The
Breeze is constructed from thicker than normal 0.9mm gauge
steel which has been treated with a sound absorbing undercoat
paint on the underside increasing this sink’s robustness.
Overflow Detail
Finish: Brushed
Topmount Profile
Tap Packs Page 254.
Breeze BR2000 with Stainless Steel Colander and Glass Chopping Board.
Breeze Single bowl and drainer
Ref. BR800L LH Drainer £189
Ref. BR800R RH Drainer £189
Installation: Topmount
Overall size: 800/500 mm
Bowl size: 340/400/190 mm
Cut-Out size: 780/480 mm
Minimum cabinet size: 450 mm
Waste included: 90mm BSW
Tap-Holes: 1- Handed
Steel gauge: 0.9 mm
Breeze Single bowl and drainer
Ref. BR1000L LH Drainer £209
Ref. BR1000R RH Drainer £209
Installation: Topmount
Overall size: 1000/500 mm
Bowl size: 480/400/200 mm
Cut-Out size: 980/480 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: 1- Handed
Steel gauge: 0.9 mm
Breeze 1.5 bowl and drainer
Ref. BR2000L LH Drainer £214
Ref. BR2000R RH Drainer £214
Installation: Topmount
Overall size: 1000/500 mm
Bowl size: 340/400/190 mm
Half bowl: 160/300 mm
Cut-Out size: 980/480 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: 1- Handed
Steel gauge: 0.9 mm
13
Stainless Steel
BREEZE
Topmount
Stainless Steel
Sapphire
1.5 bowl and drainer
Ref. SA150 Satin £107
Installation: Topmount
Overall size: 965/500 mm
Bowl size: 350/425/155 mm
Half bowl: 164/300 mm
Cut-Out size: 950/478 mm
Minimum cabinet size: 600 mm
Wastes included: 60mm plug &
chain and 90mm BSW
Tap-Holes: 2- Reversible
SAPPHIRE
The Sapphire offer true value for money and
are one of our most economical family of sinks.
Despite the price you still get plenty for your
money.
They are manufactured in 0.7mm gauge 18/10
stainless steel to ensure a rust-free future.
The classic drainer panels and sensible bowl
sizes will allow these sinks to look good in both
the utility and the kitchen environments.
Tap Packs Page 254.
Topmount Profile
Ref. BS501
Chrome Basket £26
(SA150 only)
Ref. GBD500
Glass Chopping
Board £40
Installation: Topmount
Overall size: 965/500 mm
Bowl size: 418/398/155 mm
Cut-Out size: 940/475 mm
Minimum cabinet size: 500 mm
Wastes included: 60mm plug & chain
Tap-Holes: 2- Reversible
Ref. HBS501
Sapphire Stainless
Steel Colander £41
OKIO 85
A great little sink for narrow galley style kitchens
when only 50cm deep cabinets can be used.
A useful extra waste on the drainer
acts as an overflow and is also
extremely useful for the disposal of
drink dregs when the washing up
bowl is in use.
14
14
Sapphire
Single bowl and drainer
Ref. SA100 Satin £96
Ref. SS86R
Okio 85 Single bowl and drainer
Satin £84
Linen £111
Installation: Topmount
Overall size: 860/435 mm
Bowl size: 340/370/150 mm
Cut-Out size: 836/411 mm
Minimum cabinet size: 600 mm
Wastes included: 60mm ring plug
Tap-Holes: Reversible
Topmount
Three solidly constructed sinks with star-burst drainer
patterns that offer a cheerful feel to your kitchen.
Manufactured from 0.9 gauge 18/10 stainless steel which
also benefits from sound deadening undercoat applied
which further adds to the Deep Blue’s durability.
Tap Packs Page 255.
Ref. DSO5 (DB10)
Ref. DSO4 (DB5 &15)
S/S Basket with
plate rack £40
Ref. CRO1
Stainless Steel
Colander £55
Ref. GBD500
Glass Chopping
Board £40
Brushed Finish
Linen Finish
Topmount Profile
Concealed Overflow
Deep Blue Single bowl and drainer
Ref. DB5B Brushed Steel £171
Installation: Topmount
Overall size: 800/500 mm
Bowl size: 350/410/200 mm
Cut-Out size: 780/480 mm
Minimum cabinet size: 450 mm
Waste included: 90mm BSW
Tap-Holes: Reversible
Steel gauge: 0.9 mm
Deep Blue Single bowl and drainer
Ref. DB10B Brushed Steel £193
Ref. DB10L Linen £239
Installation: Topmount
Overall size: 1000/500 mm
Bowl size: 480/400/210 mm
Cut-Out size: 980/480 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: Reversible
Steel gauge: 0.9 mm
Deep Blue 1.5 bowl and drainer
Ref. DB15B Brushed Steel £199
Ref. DB15L Linen £251
Installation: Topmount
Overall size: 1000/490 mm
Bowl size: 350/410/195 mm Half bowl: 164/300 mm
Cut-Out size: 980/480 mm
Minimum cabinet size: 600 mm
Wastes included: 2 x 90mm BSW and Connecting Kit
Tap-Holes: Reversible
Steel gauge: 0.9 mm
15
Stainless Steel
DEEP BLUE
PRECISION
The Precision family of sinks are truly
super value. They are manufactured from
durable 0.7mm gauge stainless steel and
are available with highly useful accessories
also priced to suit a tight budget.
Wooden
Chopping Board
Stainless Steel Basket
Stainless Steel
Colander
860
395
500
Installation: Topmount
Overall size: 860/500 mm
Bowl size: 345/395 mm
Cut-Out size: 844/494 mm
Minimum cabinet size: 450 mm
Waste included: 90mm BSW
Tap-Holes: Reversible
Steel gauge: 0.7 mm
965
500
395
Precision Plus 100
Single bowl and drainer
Ref. PLO100CA £90
450
965
Installation: Topmount
Overall size: 965/500 mm
Bowl size: 450/395 mm
Cut-Out size: 949/494 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: Reversible
Steel gauge: 0.7 mm
Precision Plus 150
1.5 bowl and drainer
Ref. PLO150CA £112
320
395
170
Precision 90 Basket & Board
Ref. PK90 £44
Precision 100 Basket & Board
Ref. PK100 £48
Precision 150 Basket, Board
& Colander
Ref. PK150 £52
Precision Plus 90
Single bowl and drainer
Ref. PLO90CA £87
345
16
Topmount Profile
ACCESSORY KITS
500
Stainless Steel
Topmount
FINISH
Unpolished with a matt
bowl and bright drainer
345
Installation: Topmount
Overall size: 965/500 mm
Bowl size: 345/395 mm
Half bowl: 170/320 mm
Cut-Out size: 949/494 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: Reversible
Steel gauge: 0.7 mm
Topmount
The Mistral is cooly symmetrical in
design with distinctive drainer
panels. This handsome family of
sinks also offer great value for money.
ACCESSORIES
Stainless Steel Basket
Ref. BS401 £24
Glass Chopping Board
Ref. GBD500 £40
Stainless Steel Colander
Ref. 60001 £39
Polished Finish
explained - page 6
Topmount Profile
Mistral
Single bowl and drainer
Ref. 100178901 £144
Installation: Topmount
Overall size: 860/500 mm
Bowl size: 340/400 mm
Cut-Out size: 840/480 mm
Minimum cabinet size: 450 mm
Waste included: 90mm BSW
Tap-Holes: Reversible
Steel gauge: 0.8 mm
Mistral
1.5 bowl and drainer
Ref. 100179101 £178
Installation: Topmount
Overall size: 1000/500 mm
Bowl size: 340/400 mm
Half bowl: 170/275 mm
Cut-Out size: 980/480 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: Reversible
Steel gauge: 0.8 mm
17
Stainless Steel
MISTRAL
Stainless Steel
Topmount
Colander suspended from bowl edge
Silicon Drainer Mats see page 268
GLACIER Covered Sink
The Glacier is a brand new concept for sinks, the
design ethos is to close off the sink when not in
use providing an overall sense of order to the
whole kitchen. The glass sliding boards provide a
calm uncluttered appearance when closed that
can hide the items queuing up for the dishwasher.
The glass covers in conjunction with the
suspended colanders are also a great aid in food
preparation. The futuristic design has also been
extended to the wastes which incorporate steel
covers concealing the strainer wastes - adding
extra stylistic refinement.
Easy to clean folded corners
Stainless Steel Waste Cover
Finish: Brushed
Unique sliding rail design
Glacier Glass Covers
Silver Ref. GB120 £35 each
Nero Ref. GB130 £35 each
Polar Ref. GB140 £35 each
Matches well with stainless steel appliances
A perfect match with black hobs and appliances
Looks great with white hobs and appliances
ACCESSORIES
Stainless Steel 20cm Colander
Ref. VSH20Q £79
18
Stainless Steel 30cm Colander
Ref. VSH40Q £120
Stainless Steel Colander
Ref. COL105 £49
Topmount
Topmount Profile
Topmount Profile
Glacier Single bowl and drainer
Ref. GLA100L LH Drainer £395
Ref. GLA100R RH Drainer £395
Installation: Topmount
Overall size: 897/510 mm
Bowl size: 402/342 mm
Cut-Out size: 850/480 mm
Minimum cabinet size: 500 mm
Waste included: 90mm BSW
Tap-Holes: 1-Handed
Steel gauge: 1.0 mm
Glacier 1.5 bowl and drainer
Ref. GLA150L LH Drainer £498
Ref. GLA150R RH Drainer £498
Installation: Topmount
Overall size: 897/510 mm
Bowl size: 402/342 mm
Half bowl: 180/297 mm
Cut-Out size: 850/480 mm
Minimum cabinet size: 700 mm
Waste included: 2 x 90mm BSW and
Connecting Kit
Tap-Holes: 1-Handed
Steel gauge: 1.0 mm
Glacier Double bowl
Ref. GLA200 £498
Installation: Topmount
Overall size: 897/510 mm
Bowl sizes: 400/340 mm
Cut-Out size: 850/480 mm
Minimum cabinet size: 900 mm
Waste included: 2 x 90mm BSW and
Connecting Kit
Tap-Holes: 1
Steel gauge: 1.0 mm
19
Stainless Steel
Overflow Detail
Stainless Steel
Topmount
Mirage Single bowl and drainer
Ref. MIR100L LH Drainer £227
Ref. MIR100R RH Drainer £227
Installation: Topmount
Overall size: 897/510 mm
Bowl size: 400/340/220 mm
Cut-Out size: 850/480 mm
Minimum cabinet size: 500 mm
Waste included: 90mm BSW
Tap-Holes: 1- Handed
Steel gauge: 0.7 mm
Mirage 1.5 bowl and drainer
Ref. MIR150L LH Drainer £362
Ref. MIR150R RH Drainer £362
Installation: Topmount
Overall size: 897/510 mm
Bowl size: 400/340/220 mm
Half bowl depth: 147/300/160 mm
Cut-Out size: 850/480 mm
Minimum cabinet size: 700 mm
Waste included: 2 x 90mm BSW
Tap-Holes: 1- Handed
Steel gauge: 0.7 mm
Mirage Double bowl
Ref. MIR200 £423
Installation: Topmount
Overall size: 897/510 mm
Bowl sizes: 400/340/220 mm
Cut-Out size: 850/480 mm
Minimum cabinet size: 1000 mm
Waste included: 2 x 90mm BSW
Tap-Holes: 1
Steel gauge: 0.7 mm
20
Topmount
The Mirage is a slightly more affordable
version of the ‘covered sink’. It is very
similar to the Glacier but is constructed
from 0.7mm instead of 1.0mm steel has
softer internal corners and a standard
waste.
Tap Packs page 253.
Mirage MIR150 shown
with Silver boards
and Sonatina
monobloc
Topmount Profile
Topmount Profile
Satin Finish
explained - page 6
Ref. GB140 Polar £35 each
Looks great with white hobs and appliances
Ref. GB120 Silver £35 each
Matches well with stainless steel appliances
Ref. GB130 Nero £35 each
Goes perfectly with black hobs and appliances
Waste Disposers
see page 258
21
Stainless Steel
MIRAGE Covered Sink
Topmount
Stainless Steel
ARIA
Satin Finish
explained - page 6
Topmount Profile
The Aria combines restrained style with high practicality.
The extremely generous bowl sizes and drainer areas have been made
possible by the overall dimensions of these sinks being a generous
1030/510mm, this not only means they will become a real asset in a busy
family kitchen but from the installers point of view it will cover most
existing sink holes without the need to replace expensive worktops.
Accessories Included
Ref. 2A0487
Glass Chopping Board
Ref. 2A0485
Stainless Steel Basket
Ref. 2A0486
Stainless Steel
Colander
Aria Single bowl and drainer
including Accessories
Ref. AR100L LH Drainer £262
Ref. AR100R RH Drainer £262
Installation: Topmount
Overall size: 1030/510 mm
Bowl size: 400/410/200 mm
Cut-Out size: 1014/494 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: 1- Handed
Steel gauge: 0.70 mm
Aria 1.5 bowl and drainer
including Accessories
Ref. AR150L LH Drainer £343
Ref. AR150R RH Drainer £343
Installation: Topmount
Overall size: 1030/510 mm
Bowl size: 400/410/200 mm
Half bowl: 130/380/120 mm
Cut-Out size: 1014/494 mm
Minimum cabinet size: 600 mm
Waste included: 2 x 90mm BSW
Tap-Holes: 1- Handed
Steel gauge: 0.70 mm
22
Topmount
First impressions of the Maui are of the fun loving
drainer design, but this is also a very practical sink
with its deep geometrically shaped bowls and
purpose designed accessories that combine to
create a stylish workcentre for today’s busy kitchen.
Topmount Profile
Satin Finish
explained - page 6
Accessories Included
Ref. 2A0487
Glass Chopping Board
Ref. 2A0488
Stainless Steel Basket
Ref. 2A0489
Stainless Steel
Colander
Maui Single bowl and drainer
including Accessories
Ref. MA90L LH Drainer £239
Ref. MA90R RH Drainer £239
Installation: Topmount
Overall size: 900/500 mm
Bowl size: 400/370/200 mm
Cut-Out size: 840/484 mm
Minimum cabinet size: 500 mm
Waste included: 90mm BSW
Tap-Holes: 1- Handed
Steel gauge: 0.70 mm
Maui 1.5 bowl and drainer
including Accessories
Ref. MA150L LH Drainer £322
Ref. MA150R RH Drainer £322
Installation: Topmount
Overall size: 1030/500 mm
Bowl size: 400/370/200 mm
Half bowl: 160/360/130 mm
Cut-Out size: 1014/484 mm
Minimum cabinet size: 600 mm
Waste included: 2 x 90mm BSW
Tap-Holes: 1- Handed
Steel gauge: 0.70 mm
23
Stainless Steel
MAUI
Stainless Steel
Topmount
OAKLAND
Satin Finish
explained - page 6
Oakland sinks are a modern twist on a
Topmount Profile
classic design with cool understated style.
There are two models in the family, the
versatile 1.5 bowl model and a single
bowl with a capacious capacity for big
pots and pans. Manufactured from
0.9mm high grade stainless steel,
Ref. KA11
with an enhanced Satin Finish and
Ref. KA28
Wooden Chopping Ref. KA12
ground edge trim.
S/S Colander £45
Board £33
S/S Basket £40
Oakland Single bowl and drainer
Ref. OL9851LH LH Drainer £199
Ref. OL9851RH RH Drainer £199
Oakland 1.5 bowl and drainer
Ref. OL9852LH LH Drainer £259
Ref. OL9852RH RH Drainer £259
Installation: Topmount
Overall size: 985/508 mm
Bowl size: 450/420/190 mm
Cut-Out size: 965/488 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: 1- Handed
Steel gauge: 0.9 mm
Installation: Topmount
Overall size: 985/508 mm
Bowl size: 360/424/170 mm
Half bowl: 156/342 mm
Cut-Out size: 965/488 mm
Minimum cabinet size: 600 mm
Waste included: 2 x 90mm BSW
and Connecting Kit
Tap-Holes: 1- Handed
Steel gauge: 0.9 mm
24
Ground Edge Finish
Topmount
ARLINGTON
Satin Finish
explained - page 6
Embracing the trend for geometric styling, the Arlington
consists of 1.5 bowls featuring stylish square wastes and a
smooth minimalist drainer for a bold but streamlined addition
to a contemporary kitchen scheme.
Manufactured from 0.9mm high grade stainless steel, with an
enhanced Satin Finish and ground edge trim.
Square Waste Profile
Ref. KA09
S/S Colander £68
Ground Edge Finish
Ref. KA20
S/S Basket £49
Arlington 1.5 bowl and drainer
Ref. AR9852LH LH Drainer £429
Ref. AR9852RH RH Drainers £429
Installation: Topmount
Overall size: 985/508 mm
Bowl size: 340/420/190 mm
Half bowl: 160/350 mm
Cut-Out size: 965/488 mm
Minimum cabinet size: 600 mm
Waste included: 2 x 90mm BSW
and Connecting Kit
Tap-Holes: 1- Handed
Steel gauge: 0.9 mm
Concealed Overflow
25
Stainless Steel
Topmount Profile
Stainless Steel
Topmount
Manhattan Single bowl and drainer
Ref. MN10101LH LH Drainer £249
Ref. MN10101RH RH Drainer £249
Installation: Topmount
Overall size: 1010/515 mm
Bowl size: 400/420/190 mm
Cut-Out size: 990/495 mm
Minimum cabinet size: 500 mm
Waste included: 90mm BSW
Tap-Holes: 1- Handed Steel gauge: 0.9 mm
Manhattan 1.5 bowl and drainer
Ref. MN10102LH LH Drainer £329
Ref. MN10102RH RH Drainer £329
Installation: Topmount
Overall size: 1010/515 mm
Bowl size: 350/420/190 mm
Half bowl: 156/342/120 mm
Cut-Out size: 990/495 mm
Minimum cabinet size: 600 mm
Waste included: 2 x 90mm BSW and Connecting Kit
Tap-Holes: 1- Handed Steel gauge: 0.9 mm
Satin Finish
explained - page 6
Topmount Profile
MANHATTAN
The Manhattan is designed to perfectly complement any kitchen
scheme, it is slightly larger than most sinks which makes it ideal for
replacing your old one without the need to renew the worktop.
There are three models in the family, the versatile 1.5 bowl model, a
single bowl with a capacious capacity and a double bowl model - great
for multi-tasking. All are manufactured from 0.9mm high grade stainless steel, with an enhanced Satin Finish and ground edge trim.
Manhattan Double bowl
Ref. MN10105 £369
Installation: Topmount
Overall size: 1010/515 mm Bowl sizes: 400/420/190 mm
Cut-Out size: 990/495 mm
Minimum cabinet size: 1000 mm
Waste included: 2 x 90mm BSW and Connecting Kit
Tap-Holes: 1 Steel gauge: 0.9 mm
Ref. KA12
S/S Basket £40
26
Ref. KA11
Wooden
Chopping Board £33
Ref. KA28
S/S Colander £45
Topmount
The Okio offer classic design sinks at
very affordable prices.
There are three models; a compact
single bowl model that will usefully
fit within a 40cm cabinet and two
1.5 bowl options with a choice of
bowl positions.
All models are manufactured from
0.7mm gauge stainless steel and can
be fitted as left or right hand drainers.
Tap Packs page 252.
Topmount Profile
Satin Finish
explained - page 6
Ref. GBD500
Glass Chopping
Board £40
Ref. BS401
S/S Basket £26
Ref. 03203
Okio Plastic
Colander £20
Okio single bowl and drainer
Ref. 7507123 £109
Installation: Topmount
Overall size: 860/500 mm
Bowl size: 340/400/170 mm
Cut-Out size: 836/476 mm
Minimum cabinet size: 400 mm
Waste included: 90mm BSW
Tap-Holes: 2- Reversible
Steel gauge: 0.7 mm
Okio 1.5 bowl and drainer
Ref. 7510423 £158
Installation: Topmount
Overall size: 1000/500 mm
Bowl size: 340/400/170 mm
Half bowl: 160/350 mm
Cut-Out size: 976/476 mm
Minimum cabinet size: 600 mm
Waste included: 2 x 90mm BSW and Connecting Kit
Tap-Holes: 2- Reversible Steel gauge: 0.7 mm
Okio 1.5 bowl and drainer
Ref. 7510623 £170
Installation: Topmount
Overall size: 1000/500 mm
Bowl size: 340/400/170 mm
Half bowl: 160/350 mm
Cut-Out size: 976/476 mm
Minimum cabinet size: 600 mm
Waste included: 2 x 90mm BSW and Connecting Kit
Tap-Holes: 2- Reversible Steel gauge: 0.7 mm
Waste Disposers
see page 258
27
Stainless Steel
OKIO
Stainless Steel
Topmount
Matching pop-up waste control and soap
dispenser - included.
Frame single bowl and drainer
Ref. 40180510 LH Drainer £495
Ref. 40180511 RH Drainer £495
Installation: Topmount
Overall size: 970/510 mm
Bowl size: 520/380/180 mm
Cut-Out size: 950/490 mm
Minimum cabinet size: 600 mm
Waste included: 90 mm BSW
Tap-Holes: 1- Handed
Steel gauge: 1.2 mm
The drain grating follows the design of
the sink. It’s extra large size makes it
easier to gather waste that occurs after
food preparation - included.
Frame 1.5 bowl and drainer
Ref. 40180540 LH Drainer £585
Ref. 40180541 RH Drainer £585
The custom-made rinsing basket is a
highly functional accessory that can be
used as a bowl or a colander - included.
Installation: Topmount
Overall size: 970/510 mm
Bowl size: 340/380/160 mm
Half bowl: 155/380/120 mm
Cut-Out size: 950/490 mm
Minimum cabinet size: 600 mm
Waste included: 2 x 90 mm & Connecting Kit
Tap-Holes: 1- Handed
Steel gauge: 1.2 mm
The elegant white glass preparation
board can be used as a cutting platform
or as a serving tray. Its feet lift it up from
the drainer surface whilst offering a firm
grip. Ref. 98059 £98
Frame 1.5 bowl and half drainer
Ref. 40180530 LH Drainer £649
Ref. 40180531 RH Drainer £649
The wooden food preparation board fits
over the bowl and is also designed to slide
over the drainer area. Ref. 98066 £139
28
Installation: Topmount
Overall size: 970/510 mm
Bowl size: 340/380/160 mm
Half bowl: 155/380/120 mm
Cut-Out size: 950/490 mm
Minimum cabinet size: 600 mm
Waste included: 2 x 90 mm & Connecting Kit
Tap-Holes: 1- Handed
Steel gauge: 1.2 mm
Topmount
The Frame is an entirely new generation of kitchen sinks
created and manufactured by Intra-Norway for Clearwater.
The timeless design of the Frame series with its emphasis
on form and function is typically Scandinavian in simplicity.
These sinks are made from 1.2mm steel and so have a
particularly robust feel, this sense of rigidity is strengthened
further by the incorporation of reinforcing under the
drainers.
Each sink is supplied with a series of accessories; matching
pop up waste control, soap dispenser, drain gratings and
custom made rinsing baskets.
Glass and wooden preparation boards that coordinate with
the bowl size and are designed to slide across over the
drainer areas are also available as extras.
Topmount Profile
Brushed Finish
explained - page 6
Waste Disposers
see page 258
29
Stainless Steel
FRAME
Stainless Steel
Topmount
ADELPHI
The Adelphi are constructed from a robust
1.0mm gauge steel . The edge profile is a
single thickness thus lying virtually flush with
the work surface. They are also dimensionally
bigger than the usual size sinks allowing
generous size washing bowls and the bigger
overall dimension makes them ideal for
replacing an old sink without the need to
renew the worktop. They are also supplied
with stylistic minimalistic strainer wastes
adding to the Adelhi’s modernity.
Accessory
Packs
Stainless Steel Basket
Ref. ZAKIS09/10CA £64
Includes: Basket and Bamboo
Board
Topmount Profile
Ref. ZAKIS15CA £94
Bamboo Chopping Board
Includes: Basket, Bamboo
Board and Stainless Steel
Colander
Stainless Steel Colander
Flushmount Profile
Brushed Finish
explained - page 6
Adelphi Single bowl and drainer
Ref. AD100 £249
Adelphi 1.5 bowl and drainer
Ref. AD150 £359
Installation: Topmount/Flushmount
Overall size: 940/510 mm
Bowl size: 360/420/220 mm
Cut-Out size: 920/490 mm
Minimum cabinet size: 500 mm
Waste included: 90 mm BSW
Tap-Holes: Reversible
Steel gauge: 1.0 mm
Installation: Topmount/Flushmount
Overall size: 1030/510 mm
Bowl size: 360/420/190 mm
Half bowl: 165/305/220 mm
Cut-Out size: 1010/490 mm
Minimum cabinet size: 600 mm
Waste included: 2 x 90 mm BSW & Connecting Kit
Tap-Holes: Reversible
Steel gauge: 1.0 mm
30
Topmount
Kit A (OC16 & OC01)
included with Ocean 1
Ref. OC16
Stainless Steel Basket
Ref. OC01
Washing Bowl
Ocean 1 Single bowl and Kit A
Ref. OC860 £314
Ref. OC0510
Chopping Board
and Stainless
Steel Colander £75
Installation: Topmount
Overall size: 860/500 mm
Bowl depth: 230 mm
Cut-Out size: 830/480 mm
Minimum cabinet size: 1000 mm
Waste included: 90 mm BSW
Tap-Holes: 1- Handed
Steel gauge: 1.2 mm
OCEAN
Topmount Profile
The Ocean sinks are two perfect utility sinks as they boast huge bowls that
will contain the largest of oven trays or pans. Ocean 1 is a vast single bowl
that comes with a set of clever accessories that include a water saving
washing bowl with its own waste hole and plug. Ocean 2 is a double bowl
version, its accessories are available as extras.
Brushed Finish
explained - page 6
Both sinks are very robust - built from 1.2mm stainless steel and the underside has been treated with a sound-absorbing rubberised paint which
keeps the sink quiet when in use while adding extra strength and durability.
Accessories
Ref. GA02
Plastic Colander £26
Ref. GBD400
Glass Chopping Board
£30
Ocean 2 1.75 bowl
Ref. GA2035 £208
Ref. D505
Stainless Steel
Basket £25
Installation: Topmount
Overall size: 880/480 mm
Bowl size: 480/400/215 mm
Second bowl: 290/350/205 mm
Cut-Out size: 860/458 mm
Minimum cabinet size: 1000 mm
Waste included: 2 x 90 mm BSW & Connecting Kit
Tap-Holes: 1- Handed
Steel gauge: 1.2 mm
Waste Disposers
see page 258
31
Stainless Steel
Accessories
Topmount
Stainless Steel
DUETTA
The Duetta sinks are the next
generation of the classic separate
round bowl and drainer.
Duetta Single bowl and drainer
Ref. D60 Brushed Steel £199
Overall size: 916/481mm
Bowl size: 390/205 mm
Cut-out size: 916/481mm
Minimum cabinet size: 450 mm
Waste included: 90 mm BSW
481
916
Topmount Profile
WING
The Wing is a great little
sink with a trendy shape.
Pop-up Waste
included
Topmount Profile
Accessories
for Duetta
and Wing
Wing 100 (LHD only)
Single bowl and drainer
Ref. 19401 Linen £389
Overall size: 860/515mm
Bowl size: 385/145mm
Min cabinet size: 450mm
Waste included: 90 mm BSW
Ref. BP11
Wooden Board
£40
Ref. DS02
Round Chrome
Basket £35
OBOE
A perfect sink if space is Topmount Profile
tight, whilst retaining a
useful size washing bowl.
Tap Packs page 255.
Oboe Single bowl and drainer
Ref. 813 Satin £105
Ref. 813 Linen £129
Overall size: 847/444
Bowl size: O 367/145mm
Cut-out size: 823/420 R210
Minimum cabinet size: 450mm
Waste included: 90 mm BSW
Accessories
for Oboe
Ref. BS701
Chrome Basket £23
32
Ref. 3230
Wooden Chopping
Board £40
Topmount
SILVER STAR
Topmount Profile
A most stylish sink with a generous bowl and
classically simple styling.
Silver Star Single bowl and drainer
Ref. SIL100R (RHD only) £569
Overall size: 1000/500 mm
Bowl size: 500/350/187 mm
Cut-out size: 984/484mm
Minimum cabinet size: 600 mm
Waste included: 90 mm BSW
Ref. 40916
Stainless Steel
Colander £75
Pop-up Waste
included
ECLIPSE
A perfect utility sink with an exceptionally
deep bowl. Only available with double
tap-hole.
Eclipse Superdeep Single bowl and drainer
Ref. XL980L LH Drainer £299 (2 tap-hole)
Ref. XL980R RH Drainer £299 (2 tap-hole)
Overall size: 980/510 mm
Bowl size: 508/356/254 mm
Cut-out size: 960/490mm
Minimum cabinet size: 600 mm
Waste included: 60 mm plug & chain
Tap-Holes: 2-Handed
Topmount Profile
SATURN
A simple extremely generous sink with a sun
ray pattern drainer.
Saturn Single bowl and drainer
Ref. XL1000L LH Drainer £329
Ref. XL1000R RH Drainer £329
Topmount Profile
Satin Finish
explained - page 6
Overall size: 1000/500 mm
Bowl size: 500/400/180 mm
Cut-out size: 980/480mm
Minimum cabinet size: 600 mm
Waste included: 90 mm BSW
Tap-Holes: 2-Handed
Steel gauge: 0.7 mm
33
Stainless Steel
Big Bowl Sinks
Stainless Steel
Topmount
Ref. 3820-1-NA
Vault Double Equal
Brushed Steel £605
Installation: Topmount/Undermount
Overall size: 838/559 mm
Bowl depth: 237 mm
Minimum cabinet size: 900 mm
Tap-Holes: 1
Overflow: No
Steel gauge: 1.25 mm
Ref. 3823-1-NA
The Vault Topmount from Kohler is available in two multibowl designs: with either offset or twin double bowls.
Both of these are also available with either full height
bowl dividers or with a reduced height dividers (the new
‘Smart Divide’ system explained below).
A sound absorbing undercoat keeps the Vault sinks quiet
when in use and adds extra strength to the very durable
1.2 mm stainless steel.
Bottom Basin Rack
Ref. 6641-ST £50
(for 3820 & 3838 big bowl)
Ref. 6646-ST £55
(for 3823 & 3839 small bowl)
34
Vault Offset Double
Brushed Steel £605
Installation: Topmount/Undermount
Overall size: 838/559 mm
Bowl depth: 237 mm
Minimum cabinet size: 900 mm
Tap-Holes: 1
Overflow: No
Steel gauge: 1.25 mm
The ‘Smart Divide ‘ sink is a new design concept for the
kitchen sink with the use of a low bowl divider.
Normal washing is carried out in one of the bowls or if
larger items are to be washed, simply raise the water level
to fill both bowls thus providing one extra large bowl.
A great idea that also is an excellent water saving device.
Ref. 3838-1
Ref. 3839-1
Vault Smart Divide
Double Equal Bowls
Brushed Steel £649
Vault Smart Divide
Offset Double Bowls
Brushed Steel £655
Installation: Topmount/Undermount
Overall size: 838/559 mm
Bowl depth: 237 mm
Minimum cabinet size: 900 mm
Tap-Holes: 1
Overflow: No
Steel gauge: 1.25 mm
Installation: Topmount/Undermount
Overall size: 838/559 mm
Bowl depth: 237 mm
Minimum cabinet size: 900 mm
Tap-Holes: 1
Overflow: No
Steel gauge: 1.25 mm
KOHLER
Topmount
VAULT
The Vault features a sharp flat
profile edge and smart draining
lines achieving a range of very slick
ultra-modern sinks. As usual Kohler
have produced these sinks in heavy
gauge 1.25mm steel which is further
reinforced with its sound-proof
undercoat. Choose from three single
bowl models on this page or a
choice of multi-bowl models with
different divider height options on
the facing page.
Topmount Profile
Undermount Profile
Bottom Basin Rack
Ref. 6644-ST (for 3821) £78
Ref. 6645-ST (for 3822) £63
Flat edge profile
Brushed Finish
explained - page 6
Includes Bottom
Basin Rack
Ref. 3840-1
Ref. 3822-1
Ref. 3821-1
Vault Entertainment
Brushed Steel £315
Vault Medium Single
Brushed Steel £435
Vault Large Single
Brushed Steel £529
Installation: Topmount/Undermount
Overall size: 381/381 mm
Bowl depth: 237 mm
Minimum cabinet size: 500 mm
Tap-Holes: 1
Overflow: No
Steel gauge: 1.25 mm
Installation: Topmount/Undermount
Overall size: 635/559 mm
Bowl depth: 237 mm
Minimum cabinet size: 600 mm
Tap-Holes: 1
Overflow: No
Steel gauge: 1.25 mm
Installation: Topmount/Undermount
Overall size: 838/559 mm
Bowl depth: 237 mm
Minimum cabinet size: 900 mm
Tap-Holes: 1
Overflow: No
Steel gauge: 1.25 mm
Standard
Strainer Waste
Chrome £17
Deluxe
Strainer Waste
Chrome £30
Brushed £39
Waste Disposers
see page 258
35
Stainless Steel
THE BOLD LOOK
OF
Topmount
Stainless Steel
STAR
E33
A Swiss made simple
bowl with a narrow rim
profile. Tap mounting
on worktop.
A simple rectangular bowl that
fits within a 400mm cabinet.
Finish: Polished
Finish: Satin
Topmount Profile
Installation: Topmount
Overall size: 496/446 mm
Cut-Out size: 474/424 R110 mm
Bowl depth: 175 mm
Minimum cabinet size: 500 mm
Waste included: 90mm BSW
Tap-Holes: No
Steel gauge: 0.8 mm
Topmount Profile
E33 Single bowl
Ref. 100140001 £99
Installation: Topmount
Overall size: 465/435 mm
Cut-Out size: 445/445 mm
Bowl depth: 160 mm
Minimum cabinet size: 400 mm
Waste included: 90mm BSW
Tap-Holes: No
Steel gauge: 0.7 mm
ROMA
Star Single bowl
Ref. RO45 £279
BOWLS
Topmount bowls are an ideal solution when space is
limited and a good choice as a food prep sink in your
kitchen. We offer a selection from a variety of
manufacturers so the specifications vary slightly.
The Roma sinks are made in Italy in guage 0.7mm stainless
steel and benefit from integrated tap hole positions.
These sinks can also be supplied with a selection of accessories.
Topmount Profile
ACCESSORIES
Stainless Steel Colander
(for RO3416)
Ref. VSH16 £78
Wooden Chopping Board
Ref. TL34
(for RO42 & RO3416) £56
Ref. TL45 (for RO58) £72
Roma 1.5 bowl
Ref. RO3416 £333
Roma Single bowl
Ref. RO58 £267
Roma Single bowl
Ref. RO42 £189
Installation: Topmount
Overall size: 580/500 mm
Cut-Out size: 550/480 mm
Bowl depth: 210 mm
Minimum cabinet size: 600 mm
Waste included: Pop-Up 90mm BSW
Tap-Holes: 1-LH Bowl
Steel gauge: 0.7 mm
Installation: Topmount
Overall size: 580/500 mm
Cut-Out size: 550/480 mm
Bowl depth: 210 mm
Minimum cabinet size: 600 mm
Waste included: Pop-Up 90mm BSW
Tap-Holes: 1
Steel gauge: 0.7 mm
Installation: Topmount
Overall size: 420/500 mm
Cut-Out size: 400/480 mm
Bowl depth: 180 mm
Minimum cabinet size: 450 mm
Waste included: 90mm BSW
Tap-Holes: 1
Steel gauge: 0.7 mm
36
Stainless Steel Basket
Ref. C134
(for RO42 & RO3416) £39
Ref. C145 (for RO58) £59
Topmount
The Pella boasts a generous size half bowl
which contains an optional colander that
can also fit within the main bowl.
This model can be installed as a Topmount
or Flushmount.
Pella 1.5 bowl
Ref. 108910201 LH Main Bowl £298
Ref. 108910401 RH Main Bowl £298
Installation: Topmount or Flushmount
Overall size: 605/520 mm
Cut-Out size: 593/508 mm
Minimum cabinet size: 600 mm
Waste included: 2 x 90mm BSW
Tap-Holes: 1- handed
Steel gauge: 0.7 mm
Overflow Detail
Ref. BS201
Chrome Basket £24
Ref. 043000701
Stainless Steel Colander £75
Ref. 043000201
Glass Chopping Board £45
Finish: Satin
SPARTA
PIO BAR
A great space saving sink with a
mini drainer.
When space gets really tight the Pio Bar
is the ideal solution because of it’s most
compact dimensions.
Topmount Profile
Flushmount Profile
Finish: Satin
Topmount Profile
Sparta Single bowl and drainer
Ref. 100132501 £156
Pio Bar Single bowl
Ref. PB380 £92
Installation: Topmount
Overall size: 620/500 mm
Cut-Out size: 600/480 mm
Minimum cabinet size: 450 mm
Waste included: 90mm BSW
Tap-Holes: 1- Reversible
Steel gauge: 0.7 mm
Installation: Topmount
Overall size: 380/380 mm
Cut-Out size: 356/356 mm
Minimum cabinet size: 450 mm
Waste included: 90mm BSW
Tap-Holes: 1- Handed
Steel gauge: 0.7 mm
37
Stainless Steel
PELLA
Topmount
Stainless Steel
STEREO
A high quality range of Topmount bowls with
slim-profile edges that can be installed in
standard or granite worksurfaces giving the feel
and appearance of more expensive
undermount type installations.
The Stereo sinks are manufactured from 1.2mm
gauge stainless steel and have a beautiful
burnished brush finish that compliments
appliances wonderfully. If this is not enough the
underside is coated with a sound absorbing
paint that also reduces condensation and
maintains water temperature.
90mm Basket
Strainer Wastes
included
Minimalist 15mm
radius corners
Topmount Profile
Bowl size: 650/400/200
Cabinet size: 700 mm
Bowl size: 340/400/200 mm
Cabinet size: 450 mm
Stereo 1.5 Bowl
Ref. STD65 £446
Stereo Single Bowl
Ref. STE40 £284
Main bowl: 340/400/200
Half bowl: 180/400/140
Cabinet size: 600 mm
Bowl size: 400/400/200
Cabinet size: 500 mm
Stereo Double Bowl
Ref. STE4034 £545
Stereo Single Bowl
Ref. STE45 £308
Left bowl: 340/400/200
Right bowl: 400/400/200
Cabinet size: 850 mm
Bowl size: 450/400/200
Cabinet size: 500 mm
Accessories
Bowl size: 500/400/200
Cabinet size: 600 mm
38
Flushmount Profile
Stereo Single Bowl
Ref. STE65 £414
Stereo Single Bowl
Ref. STE34 £282
Stereo Single Bowl
Ref. STE50 £326
Concealed
Overflow
Ref. GBD400
Glass Chopping
Board £30
Ref. COL105
Stainless Steel
Colander £52
Ref. COL103
Stainless Steel
Colander £84
Topmount
Arco Bowl
Ref. RB450B
Brushed Steel £84
Ref. RB450L
Linen £99
Cut-out size
416
440mm
185mm
Cabinet size 450mm
Round Bowls
Topmount Profile
A selection of round bowls that offer great
versatility in the kitchen - these classic favourites
continue to be a popular choice as the main
washing-up sink or as a secondary food prep sink.
Arco & Centrovel Accessories
Ref. DS02
Stainless Steel
Basket £35
Arco Drainer
Ref. RD450B
Brushed Steel £69
Ref. RD450L
Linen £89
Cut-out size 416
Fits within the worktop
thickness so can be
fitted over appliances
and drawer units
440mm
Ref. BP11
Wooden Chopping
Board £41
PREP SINKS
Ref. 3339T
Cabinet size no restriction
Kohler Round Bowl
Brushed Steel £312
Satin Finish
Depth 134mm
Includes Waste
CENTROVAL
Linen Finish
Brushed Finish
explained - page 6
292
Cabinet size 350mm
Ref. 25201
Royal Mini
Brushed Steel £99
Depth 170mm
Cut-out 335mm
Includes Waste
Strainer Wastes
included with
Round Bowl
Ref. C510S
Satin £127
Ref. C510L
Linen £148
Cut-out size
490
all sinks
Cabinet size 450
Cabinet size 350mm
Waste Disposers
see page 258
39
Stainless Steel
ARCO
Topmount
Stainless Steel
CONTRACT
Topmount
The Contract sinks are good old fashioned styled
sinks that used to grace your Grannie’s kitchen.
A selection of multi bowls and double drainer
options make this family of sinks excellent for high
use or community kitchens.
Shallow Bowl 127mm
Suitable for wheelchair users
Contract Single Bowl & Drainer
1 Tap-hole reversible
Ref. PH940 £175
Contract Single Bowl and Drainer
0.7 mm Gauge - 1 Tap-Hole
Ref. SBSDL1 LH drainer £83
Ref. SBSDR1 RH drainer £83
Contract Single Bowl and Drainer
0.7 mm Gauge - 2 Tap-Hole
Ref. SBSDL2 LH drainer £83
Ref. SBSDR2 RH drainer £83
Contract BS Single Bowl and Drainer
0.9 mm Gauge - 1 Tap-Hole
Ref. BSL1 LH drainer £137
Ref. BSR1 RH drainer £137
Contract BS Single Bowl and Drainer
0.9 mm Gauge - 2 Tap-Hole
Ref. BSL2 LH drainer £137
Ref. BSR2 RH drainer £137
Ref. WCWO Waste & Overflow £5
Ref. WCWO Waste & Overflow £5
Ref. WCWO Waste & Overflow £5
Cabinet Size 500mm
Gauge 0.7mm
Topmount Profile
Contract Single Bowl / Double Drainer
Ref. SBDD1 1 Tap-Hole £215
Ref. WCWO Waste & Overflow £5
Cabinet size: 500 mm
Cut-out size: 1290/490 mm
Gauge: 0.7 mm
Contract Single Bowl / Double Drainer
Ref. SBDD2 2 Tap-Hole £215
Ref. WCWO Waste & Overflow £5
Cabinet size: 500 mm
Cut-out size: 1290/490 mm
Gauge: 0.7 mm
Contract Double Bowl / Single Drainer
Ref. DBSDL1 1 Tap-Hole LH drainer £269
Ref. DBSDR1 1 Tap-Hole RH drainer £269
Ref. WCWO Waste & Overflow £5
Ref. W90O 90mm BSW & Overflow £22
(both required)
Cabinet size: 1000 mm
Cut-out size: 1290/490 mm
Gauge: 0.7 mm
Contract Double Bowl / Single Drainer
Ref. DBSDL2 2 Tap-Hole LH drainer £269
Ref. DBSDR2 2 Tap-Hole RH drainer £269
Ref. WCWO Waste & Overflow £5
Ref. W90O 90mm BSW & Overflow £22
(both required)
Cabinet size: 1000 mm
Cut-out size: 1290/490 mm
Gauge: 0.7 mm
40
Lay-On
Lay-On
The Contract Lay-On fit directly on to the kitchen
cabinet and are not set into a worktop, therefore
maximising the ‘wet’ area. There are multi-bowl and
multi-drainer options to choose from. Each sink is
supplied with twin tap-holes for either traditional
pillar taps or deck mixer style taps.
Finish:
Bowl Matt
Drainer Polished
Please see pages 206-207 to see our recommended
tap range.
Contract Lay-On Single Bowl and Drainer
Square Front - Two Tap-Hole
Ref.105SFL 1000/500mm LH drainer £116
Ref.105SFR 1000/500mm RH drainer £116
Roll Front - Two Tap-Hole
Ref.105RFL 1000/500mm LH drainer £124
Ref.105RFR 1000/500mm RH drainer £124
Contract Lay-On Single Bowl and Drainer
Square Front - Two Tap-Hole
Ref.106SFL 1000/600mm LH drainer £127
Ref.106SFR 1000/600mm RH drainer £127
Roll Front - Two Tap-Hole
Ref.106RFL 1000/600mm LH drainer £130
Ref.106RFR 1000/600mm RH drainer £130
Ref. WCWO Waste & Overflow £5
Contract Lay-On Single Bowl / Double Drainer
Roll Front - Two Tap-Hole
Ref.156DDRF 1500/600mm £179
Bowl dim. 400/400/170mm
Ref. WCWO Waste & Overflow £5
Contract Lay-On Single Bowl / Double Drainer
Square Front - Two Tap-Hole
Ref. 63DDSF 63/21 inches £169
Bowl dim. 400/400/170mm
Ref. WCWO Waste & Overflow £5
Contract Lay-On Double Bowl / Single Drainer
Roll Front - 1500/600mm Two Tap-Hole
Ref.156DBRFL LH drainer £252
Ref.156DBRFR RH drainer £252
Bowl dim. 400/400/170mm
Ref. WCWO Waste & Overflow £5 (2 required)
Contract Lay-On Double Bowl / Double Drainer
Roll Front - 2000/600mm Two Tap-Hole
Ref. 206DBRF £298
Bowl dim. 400/400/170mm
Ref. WCWO Waste & Overflow £5 (2 required)
41
Stainless Steel
CONTRACT
Freestanding
Stainless Steel
WATERSTATION
Peninsula - Circular or ‘D’ Shape
The Waterstation is a completely revolutionary concept for the kitchen.
It has four types of application: you can use it as a island unit or it can be
incorporated within the kitchen units. If you are installing it within units
state if it is in a corner, peninsula or a straight run.
Ø 1000
250/330
250/300
The top and bottom sections are available in two depths.
Please state preference when ordering.
Ref. AQST
Waterstation (Including Mahogany Accessories) £5297
The Top Section can be purchased separately £1609
570
Island - Circular Shape
Corner - Circular Shape (with fillers)
In-line - ‘D’ Shape
42
100/130
The Sink Section to install in worktop £1509
State type of installation when ordering.
Allow 4 weeks for delivery.
Freestanding
All of the following
accessories are included in
the price of the Waterstation.
Twin bowl board,
includes two stainless
steel bowls.
Large bowl board, includes one
large stainless steel bowl and
one coordinated
Colander.
Additional segment
shaped boards
Additional perforated
segment shaped trays
Mahogany £65
Stainless Steel £219
Segment
shaped board
Perforated
stainless steel tray
Non perforated
stainless steel tray
Additional
board with
stainless steel bowls
Additional nonperforated segment
shaped trays
Mahogany £233
Stainless Steel £125
Revolving inner shelf
Recommended
Tap for the
Waterstation
Pull out waste bins
included
Sliding door within base
Three individual
bowls incorporated
into the one unit
Ref. 72070904
360 degree X-Trend
Pull-Out tap in
brushed steel £595
43
Stainless Steel
Accessories
Undermount
Stainless Steel
UNDERMOUNTS
The current fashion for solid surface worktops
has led to the increasing number of undermounted sink options available. We offer an
unrivalled eleven ranges within our stainless
steel collection providing a total choice of
styles and price bands.
Undermount sink installation
Undermount sinks are installed underneath
solid surface worktops such as granite, stone or
wood. They cannot be fitted with laminate or
melamine worktops.
SALSA
The Salsa are the latest range of
undermount sink from Clearwater they
have contemporary rectilinear lines with
25mm radius corners and are constructed
from 0.8mm steel. A sound absorbing
undercoat keeps the Salsa quiet when in
use whilst adding to the sinks durability.
Concealed Overflow
Undermount Profile
There are three double bowl and three
single bowl models to choose from - all
of which can be mixed and matched to
create the perfect sink solution.
25mm radius
corners
Tap Packs page 248.
Undermount Cut-outs - DXF drawings are
available for download.
Ref. GBD400
Glass Chopping
Board £30
Ref. COL103
Stainless Steel
Colander £84
Ref. COL105
Stainless Steel
Colander £53
340
Salsa 1.5 bowl LHB
Ref. SA53L LH Bowl £266
Installation: Undermount
Overall size: 580/450 mm
Bowl size: 340/400/190 mm
Half bowl: 160/300/120 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: No
Steel gauge: 0.8 mm
160
30
580
Salsa 1.5 bowl RHB
Ref. SA53R RH Bowl £266
Installation: Undermount
Overall size: 580/450 mm
Bowl size: 340/400/190 mm
Half bowl: 160/300/120 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: No
Steel gauge: 0.8 mm
Bowl Mats
see page
268
44
30
580
340
160
Undermount
Installation: Undermount
Overall size: 760/450 mm
Bowl sizes: 340/400/190 mm
Minimum cabinet size: 800 mm
Waste included: 90mm BSW
Tap-Holes: No
Steel gauge: 0.8 mm
Brushed Finish
explained - page 6
Salsa Single bowl
Ref. SA48 £206
Salsa Single bowl
Ref. SA34 £166
Salsa Half bowl
Ref. SA16 £86
Installation: Undermount
Overall size: 530/450 mm
Bowl size: 480/400/200 mm
Minimum cabinet size: 600 mm
Waste included: 90mm BSW
Tap-Holes: No
Steel gauge: 0.8 mm
Installation: Undermount
Overall size: 390/450 mm
Bowl size: 340/400/190 mm
Minimum cabinet size: 400 mm
Waste included: 90mm BSW
Tap-Holes: No
Steel gauge: 0.8 mm
Installation: Undermount
Overall size: 200/340 mm
Bowl size: 160/300/120 mm
Minimum cabinet size: 300 mm
Waste included: 90mm BSW
Tap-Holes: No
Steel gauge: 0.8 mm
Deluxe Strainer
Waste (upgrade)
Chrome £9
Brushed £11
Waste Disposers
see page 258
45
Stainless Steel
Salsa Double bowl
Ref. SA77 £296
15mm
radius
corners
The Stereo sinks are state of the art, modern
and very slick with 15mm radius corners and
distinctive draining lines. These high quality
sinks can be fitted in both undermount and
inset installations. Manufactured from
1.2mm gauge stainless steel and coated with
a sound and temperature insulating paint on
the underside.
Undermount
Ref. COL103
Stainless Steel
Colander £84
Ref. GBD400
Glass Chopping
Board £30
Ref. COL105
Stainless Steel
Colander £53
Undermount Profile
R1
400
95
5
430
Stainless Steel
STEREO
180
210
Stereo Single Bowl
Ref. STE18 £189
Installation: Undermount
Overall size: 210/430 mm
Bowl size: 180/400/140 mm
Cabinet size: 300 mm
Steel gauge: 1.2 mm
Stereo Single Bowl
Ref. STE34 £282
Stereo STD65 shown with KWC Ono Tap
46
Installation: Undermount
Overall size: 370/430 mm
Bowl size: 340/400/200 mm
Cabinet size: 450 mm
Steel gauge: 1.2 mm
Stereo Single Bowl
Ref. STE40 £284
Stereo Drainer
Ref. STD40 £155
Installation: Undermount
Overall size: 430/430 mm
Bowl size: 400/400/200
Cabinet size: 500 mm
Steel gauge: 1.2 mm
Installation: Undermount
Overall size: 430/430 mm
Bowl size: 400/400/40 mm
Steel gauge: 1.2 mm
Stereo Single Bowl
Ref. STE45 £308
Stereo Single Bowl
Ref. STE50 £326
Installation: Undermount
Overall size: 480/430 mm
Bowl size: 450/400/200
Cabinet size: 500 mm
Steel gauge: 1.2 mm
Installation: Undermount
Overall size: 530/430 mm
Bowl size: 500/400/200
Cabinet size: 600 mm
Steel gauge: 1.2 mm
Undermount
Installation: Undermount
Overall size: 580/430 mm
Main bowl: 340/400/200 mm
Half bowl: 180/400/140 mm
Cabinet size: 600 mm
Steel gauge: 1.2 mm
Concealed Overflow
Brushed Finish
explained - page 6
Stereo Single Bowl
Ref. STE65 £414
Bowl Mats
see page
268
Installation: Undermount
Overall size: 680/430 mm
Bowl size: 650/400/200
Cabinet size: 700 mm
Steel gauge: 1.2 mm
Strainer Wastes
included with
all sinks
Deluxe Strainer
Waste (upgrade)
Chrome £9
Brushed £11
Stereo Double Bowl
Ref. STE4034 £545
Installation: Undermount
Overall size: 800/430 mm
Left bowl: 340/400/200 mm
Right bowl: 400/400/200 mm
Cabinet size: 700 mm
Steel gauge: 1.2 mm
Waste Disposers
see page 258
47
Stainless Steel
Stereo 1.5 Bowl
Ref. STD65 £446
Undermount
Stainless Steel
STARK Undermount
The Stark are a range of luxury sinks that have
taken minimalism to new heights with their pure
rectilinear lines. Durability is assured with 1.2mm
gauge stainless steel wich is coated with a sound
and temperature insulating paint
on the underside.
Brushed Finish
explained - page 6
Strainer Wastes
included with
all sinks
Ref. COL105
Stainless Steel
Colander £53
Ref. COL103
Stainless Steel
Colander £84
Deluxe Strainer
Waste (upgrade)
Chrome £9
Brushed £11
Concealed Overflow
180
Ref. GBD400
Glass Chopping
Board £30
Stark Single Bowl
Ref. SK18 £173
Overall size: 200/440 mm
Bowl size: 180/400/150 mm
Cabinet size: 300 mm
Stark Single Bowl
Ref. SK34 £258
0mm radius corners
Overall size: 380/440 mm
Bowl size: 340/400/200 mm
Cabinet size: 400 mm
Stark Single Bowl
Ref. SK75 £432
Stark Single Bowl
Ref. SK45 £279
Overall size: 490/440 mm
Bowl size: 450/400/200 mm
Cabinet size: 500 mm
Stark Single Bowl
Ref. SK50 £289
Overall size: 540/440 mm
Bowl size: 500/400/200 mm
Cabinet size: 600 mm
Stark 1.5 Bowl
Ref. SK55 £415
Overall size: 580/430 mm
Main bowl: 340/400/200 mm
Half bowl: 180/400/140 mm
Cabinet size: 600 mm
48
Overall size: 430/780 mm
Bowl size: 750/400/230 mm
Cabinet size: 800 mm
Stark Double Bowl
Ref. SK77 £494
Overall size: 430/800 mm
Left bowl: 340/400/200 mm
Right bowl: 400/400/200 mm
Cabinet size: 1000 mm
Stark Double Bowl
Ref. SK83 £508
Overall size: 430/860 mm
Bowl sizes: 400/400/200 mm
Cabinet size: 1000 mm
Undermount
Overall size:
400/340 mm
Bowl size:
350/290/165 mm
Cabinet size:
400 mm
Tango
Ref. SP410 £155
Tango
Ref. SP480 £179
Overall size:
530/450 mm
Bowl size:
480/400/195 mm
Cabinet size:
600 mm
390
440
Overall size:
400/460 mm
Bowl size:
350/410/185 mm
Cabinet size:
450 mm
Tango Round Bowl
Ref. SP14 £164
440
185
Overall size: 440 mm
Bowl size: 390/185 mm
Cabinet size: 450 mm
Tango 1.5 Bowl
Ref. SP20 £245
Overall size: 594/460 mm
Bowl size: 350/410/185 mm
Half bowl: 164/300 mm
Cabinet size: 600 mm
Tango 1.5 Bowl
Ref. SP25L LH Bowl £252
Ref. SP25R RH Bowl £252
Overall size: 594/460 mm
Bowl size: 350/410/185 mm
Half bowl: 164/300 mm
Cabinet size: 600 mm
Illustrated Tango SP25
TANGO
A series of competitively priced
sinks in a versatile range of sizes
and bowl options. Manufactured
from 0.8mm stainless steel and
treated with sound and
temperature insulating paint.
Tap Pack page 252.
Concealed Overflow
Brushed Finish
explained - page 6
Undermount Profile
265
Tango 1.75 Bowl
Ref. SP21L LH Bowl £246
Ref. SP21R RH Bowl £246
Overall size: 695/460 mm
Bowl size: 350/410/185 mm
.75 bowl: 265/315 mm
Cabinet size: 800 mm
S/S Round Basket
Ref. DS02 (SP14)
£37
S/S Colander
Ref. CR01
(SP20 & SP25) £52
Strainer Wastes
included with
all sinks
Tango Double Bowl
Ref. SP22 £264
Overall size: 780/460 mm
Bowl sizes: 350/410/185 mm
Cabinet size: 800 mm
S/S Basket with rack
Ref. DS04
(SP20/22/25/410) £40
S/S Basket with rack
Ref. DS05
(SP480) £40
Deluxe Strainer
Waste (upgrade)
Chrome £9
Brushed £11
49
Stainless Steel
Tango
Ref. SP350 £136
Overall size: 204/340 mm
Bowl size: 164/300/100 mm
Cabinet size: 300 mm
165
Tango
Ref. SP164 £55
The Just range of luxury undermount
sinks are manufactured in America
from 1.22mm gauge stainless steel and
have been brush finished to give a
lustrous grain effect.
They have been treated on the
underside with a sound absorbing
undercoat.
All models have
overflows.
Undermount
Strainer Wastes
included
medium corners
50
Deluxe Strainer
Waste (upgrade)
Chrome £19
Brushed £24
Just Single Bowl
Ref. US9518B £367
Just Single Bowl
Ref. US1821B £512
Overall size: 243/458 mm
Bowl size: 192/407/185 mm
Cabinet size: 300 mm
Overall size: 534/458 mm
Bowl size: 483/407/185 mm
Cabinet size: 600 mm
Just Single Bowl
Ref. US13518B £446
Just Single Bowl
Ref. US1824B £553
Overall size: 344/458 mm
Bowl size: 293/407/185 mm
Cabinet size: 400 mm
Overall size: 611/458 mm
Bowl size: 560/407/185 mm
Cabinet size: 600 mm
Just Single Bowl
Ref. US1830B £698
Overall size: 458/458 mm
Bowl size: 407/407/185 mm
Cabinet size: 450 mm
Overall size: 763/458 mm
Bowl size: 712/407/185 mm
Cabinet size: 800 mm
Cabinet size 800mm
Just Single Bowl
Ref. US1818B £489
Cabinet size 600mm
Deep Bowls
Stainless Steel
JUST
Just Single Bowl
Ref. USX 1824A £724
Just Single Bowl
Ref. USX 1830A £894
Overall size: 611/458 mm
Bowl Size: 560/407/267 mm
Overall size: 763/458 mm
Bowl Size: 712/407/267 mm
THE BOLD LOOK
OF
KOHLER
ICEROCK
Undermount
A sound absorbing undercoat keeps
the Icerock quiet when in use and
adds extra strength to the very
durable 1.22mm gauge stainless steel.
All models have overflows except
Round Bowl 3339.
Brushed Finish
explained - page 6
Icerock Single Bowl
Ref. 3338W £345
Installation: Undermount
Overall size: 279/435140 mm
Bowl size: 235/391 mm
Cabinet size: 500 mm
Gauge: 1.22 mm
Icerock 1.75 Bowl
Ref. 3356W-L £915
Icerock Single Bowl
Ref. 3337W £405
Installation: Undermount
Overall size: 394/498/191 mm
Bowl size: 349/454 mm
Cabinet size: 500 mm
Gauge: 1.22 mm
Installation: Undermount
Overall size: 892/511 mm
Left bowl: 457/457/241 mm
Right bowl: 356/381/191 mm
Cabinet size: 900 mm
Gauge: 1.22 mm
Icerock Single Bowl
Ref. 3336W £385
Installation: Undermount
Overall size: 394/435/194 mm
Bowl size: 349/391 mm
Cabinet size: 500 mm
Gauge: 1.22 mm
Icerock Single Bowl
Ref. 3335W £429
Round Bowls
Installation: Undermount
Overall size: 498/498/248 mm
Bowl size: 454/454 mm
Cabinet size: 500 mm
Gauge: 1.22 mm
Icerock 1.5 Bowl
Ref. 3355W-L £849
Installation: Undermount
Overall size: 781/511 mm
Left bowl: 457/457/241mm
Right bowl: 225/381/140mm
Cabinet size: 800 mm
Gauge: 1.22 mm
Standard
Strainer Waste
Chrome £22
Icerock Round Bowl
Ref. 3339W £295
Icerock Round Bowl
Ref. 3341W £405
Bowl size: 292/292/133 mm
Overall size: 467/467/191 mm
Deluxe
Strainer Waste
Chrome £37
Brushed £46
51
Stainless Steel
The Kohler Icerocks are manufactured
in the US to the highest of standards.
They are a highly versatile - mix and
match separate bowls with square or
soft corners, or choose between our
double bowl options for the perfect
solution in your kitchen.
The Kohler Icerock undermount sinks offer a
choice of slick 45mm radius undermounts shown
on these pages or a softer radius range (page 55)
for more traditional settings.
Undermount
Stainless Steel
ICEROCK
Icerock sinks give you the design flexibility you
need with the professional look of stainless steel.
They are manufactured in 1.22mm stainless steel
-the highest grade available for domestic sinks .
A sound absorbing undercoat called Silentshield
is also applied to the underside of the bowls; this
sharply decreases noises from dishes, running
water and waste disposal units. Silentshield also
helps reduce condensation and maintain water
temperature.
All models have overflows except 3352BW-L.
Accessories
Ref. 3192-0
Bottom Rinse Rack
Stainless Steel £105
Ref. 3190
Bottom Rinse Rack
Stainless Steel £87
Ref. 3277-0
Stainless Steel
Basket £56
Ref. 3294-NA
Wooden Chopping
Board £105
Ref. 6636
Wooden Chopping Board £45
(suitable for all models)
45mm Radius
Icerock Double bowl Equal
Ref. 3350W £879
457
Installation: Undermount
Overall size: 800/457 mm
Left bowl: 356/400/191mm
Right bowl: 356/400/191mm
Cabinet size: 900mm
Accessories available:
3294-NA, 3277-0, 3190-0
Ø90
29
406
Overall size: 800/457 mm
Left bowl: 356/406/244 mm
Right bowl: 356/406/194 mm
Cabinet size: 900 mm
Accessories available:
3294-NA, 3277-0, 3190-0
Ø90
Icerock 1.5 bowl
Ref. 3352W £879
156
406
Icerock Double bowl Hi/Low
Ref. 3351W £885
229
Ø90
Overall size: 800/457 mm
Left bowl: 483/406/194 mm
Right bowl: 229/406/143 mm
Cabinet size: 900 mm
Accessories available:
3294-NA, 3277-0, 3190-0
Icerock 1.5 bowl
Ref. 3352BW-L £835
156
406
229
Ø90
Overall size: 800/457 mm
Left bowl: 229/406/143 mm
Right bowl: 483/406/194 mm
Cabinet size: 900 mm
Accessories available:
3294-NA, 3277-0, 3190-0
52
THE BOLD LOOK
OF
KOHLER
Undermount
22
200
200
Brushed Finish
explained - page 6
Icerock Single bowl
Ref. 3333W £349
Icerock Single bowl
Ref. 3334W £469
Installation: Undermount
Overall size: 273/445 mm
Bowl size: 230/400/140 mm
Cabinet size: 500 mm
Installation: Undermount
Overall size: 400/517 mm
Bowl size: 356/473/191mm
Cabinet size: 500 mm
Accessories available: 3277-0
Icerock Single bowl
Ref. 3331W £405
Installation: Undermount
Overall size: 400/445 mm
Bowl size: 356/400/194 mm
Cabinet size: 500mm
Accessories available:
3294-NA, 3277-0, 3190-0
Icerock Single bowl
Ref. 3330W Deep £415
Installation: Undermount
Overall size: 400/445 mm
Bowl size: 356/400/244mm
Cabinet size: 500 mm
Accessories available: 3277-0
Undermount Profile
Icerock Single bowl
Ref. 3332W £499
Installation: Undermount
Overall size: 584/445 mm
Bowl size: 540/400/191mm
Cabinet size: 600 mm
Accessories available:
3294-NA, 3277-0, 3192-0
Icerock Single bowl
Ref. 3325W Deep £499
Installation: Undermount
Overall size: 584/445 mm
Bowl size: 540/400/241mm
Cabinet size: 600 mm
Accessories available:
3294-NA, 3277-0, 3192-0
Standard
Strainer Waste
Chrome £22
Deluxe
Strainer Waste
Chrome £37
Brushed £46
53
Stainless Steel
230
22
Stainless Steel
Undermount
Stages 3761 shown with Kohler Karbon tap
See pages 182 & 183
Stages Single bowl and drainer
including accessories
Ref. 3761 £1895
Installation: Undermount
Overall size: 1143/470 mm
Bowl depth: 241 mm
Cut-Out size: 1108/435 mm
Minimum cabinet size: 1000 mm
Tap-Holes: No
Overflow: No
Steel gauge: 1.59 mm
Weight: 34.77 kg
Inspired
STAGES Chef
Collection
The Stages sinks are two highly sophisticated undermount sinks
featuring high capacity bowls with wet surface work areas. Kohler
developed the Stages by closely consulting with professional chefs
and as a result have created the ultimate food prep-station that will
prove invaluable in both commercial and domestic kitchens.
Both sinks are supplied with a set of coordinated accessories that
consist of a wooden chopping board, two trays and six bowls; the
board and trays are designed to sit and slide across the bowl ridge.
54
THE BOLD LOOK
OF
KOHLER
STAGES
Undermount
Stages Single bowl and drainer
including accessories
Ref. 3760 £1655
Brushed Finish
explained - page 6
Installation: Undermount
Overall size: 838/470 mm
Bowl depth: 241mm
Cut-Out size: 803/435 mm
Minimum cabinet size: 1000 mm
Tap-Holes: No
Overflow: No
Steel gauge: 1.59 mm
Weight: 30.55 kg
Undermount Profile
Accessories
included with sink
Standard
Strainer Waste
Chrome £22
Ref. K6234
Bottom Basin Rack
Ref. K6230
Utensil Tray
Ref. K6231
Flip Tray
Ref. K6235
Set of 6 Ceramic Prep Bowls
Ref. K6236
Accessory Storage Rack
Ref. K6232
Hardwood Chopping Board
Deluxe
Strainer Waste
Chrome £30
Brushed £39
Waste Disposers
see page 258
55
Stainless Steel
Chef Inspired Collection
The distinctive bevelled edge of the
8 Degree sink creates a subtle tone
contrast with the stainless steel basin for
a striking visual effect. The bevelled
detail also serves a practical role as the
support for the accompanying wine glass
drying rack that is supplied with this sink.
Undermount
Stainless Steel
8 DEGREE
The 8 Degree sinks are available in both
a twin bowl and a single bowl model.
A sound absorbing undercoat keeps
these sinks quiet when in use and adds
extra strength to the very durable
1.59 mm stainless steel.
Standard
Strainer Waste
Chrome £17
Deluxe
Strainer Waste
Chrome £30 Brushed £39
8 Degree Entertainment Sink
8 Degree Professional Sink
Ref. 3671 £725
Ref. 3673 £805
Installation: Undermount
Overall size: 457/457/259 mm
Bowl size: 419/419/248 mm
Minimum cab size: 500 mm
Tap-Holes: No
Overflow: No
Steel gauge: 1.59 mm
Installation: Undermount
Overall size: 838/457/259 mm
Bowl size: 800/419/248 mm
Minimum cab size: 900 mm
Tap-Holes: No
Overflow: No
Steel gauge: 1.59 mm
56
THE BOLD LOOK
OF
KOHLER
Undermount
Offset Double Bowl
Chamfered edges and a chunky bowl divider
combine to create a new generation of designer
undermount sinks. The bowls of the 8 Degree
Offset Double Bowl are unequal in size allowing
the larger one to accommodate bigger items
while the smaller bowl can be used for smaller
everyday items.
ACCESSORIES
Included with all models
Brushed Finish
explained - page 6
Bottom Basin Rack
Ref. 6134 for 3671
Ref. 6137 for 3673
Ref. 6135 for 3672 LH bowl
Ref. 6136 for 3672 RH bowl
Undermount Profile
A sound absorbing undercoat keeps the 8
Degree sinks quiet when in use and adds extra
strength to the very durable 1.59mm stainless
8 Degree Double Offset
Wine Glass
Rack
Ref. 3672 £919
Ref. 6133
for all models
Installation: Undermount
Overall size: 838/457 mm
Bowl depth: 259 mm
Cut-Out size: 800/419 mm
Minimum cab size: 1000 mm
Tap-Holes: No
Overflow: No
Steel gauge: 1.59 mm
Optional Chopping Board
Standard
Strainer Waste
Chrome £17
Deluxe
Strainer Waste
Chrome £30
Brushed £39
Ref. 3140
Optional Bamboo Chopping Board £125
Waste Disposers
see page 258
57
Stainless Steel
8 DEGREE
THE BOLD LOOK
OF
Undermount
Stainless Steel
KOHLER
The Poise unique bevelled edge
Poise 3389W-NA shown with Vinnata pull-out spray tap see page 198 - Trough 3187W seen beyond
Poise 3391W-NA shown with
chopping board in situ
Poise Single Bowl
Ref. 3391W £779
POISE
Overall size: 457/457 mm
Bowl size: 356/356/241 mm
Minimum cabinet size: 500 mm
50
356
The Poise Undermount bowls are a
range of four models all produced from
the finest 1.2mm gauge stainless steel.
The bevelled edges that are unique to
the Poise provide a very dynamic look.
This combined with the clean straight
lines and sculptured draining grooves to
create the most chic range of
Undermount sinks available.
229
356
457
229
457
33
Poise 1.75 bowl
Ref. 3389W £1039
Overall size: 838/457 mm
Bowl size: 462/356/241 mm
.75 bowl: 271/356/241 mm
Minimum cabinet size: 900 mm
271
462
50
229
457
356
556
187
838
33
Poise Single bowl
Ref. 3387W £955
Overall size: 838/457 mm
Bowl size: 737/356/248 mm
Minimum cabinet size: 900 mm
737
50
Ref. 3140
Sliding Wooden Chopping Board £125
The unique bevelled edge allows a chopping board
with a bevel that matches to sit neatly on the sink.
229
356
457
419
838
Poise Double Bowl
Ref. 3388W £1039
Overall size: 838/457 mm
Bowl sizes: 367/356/241 mm
Minimum cabinet size: 00 mm
367
367
50
229
457
356
235
370
838
58
33
Standard
Strainer Waste
Chrome £22
Bottom Rinse Rack
Ref. 3141
(for model 3387) £239
Ref. 3142
(for model 3388 & 3391) £215
Ref. 3143
(for model 3389) £229
Deluxe
Strainer Waste
Chrome £37
Brushed £46
THE BOLD LOOK
OF
KOHLER
Undermount
Trough 3971W shown with a Vinnata pull-out spray tap
see page 198
TROUGH
Brushed Finish
explained - page 6
The Trough Undermount sinks are available
in three sizes, all produced in high quality
1.2mm gauge stainless steel. These unique
sinks have been formed with a gently sloping
base to the centre to help drain the water
efficiently away. Ideal for food preparation
and entertaining.
508
Icerock Trough
Ref. 3179W £649
Ref. 3136 Small
Stainless Steel Rack £125
(Models 3179W and 3187W)
Undermount Profile
Ref. 3137 Large
Stainless Steel Rack £159 (Model 3188W)
25
105
171
Overall size: 559/210 mm
Bowl size: 508/159/133 mm
Minimum cabinet size: 600 mm
Icerock Trough
Ref. 3187W £959
Ref. 3127
Suspended
Stainless Steel Basket £159
210
279
559
787
25
105
165
Overall size: 838/210 mm
Bowl size: 787/159/160 mm
Minimum cabinet size: 900 mm
Standard
Strainer Waste
Chrome £17
210
419
838
Icerock Trough
Ref. 3188W £1095
Deluxe
Strainer Waste
Chrome £30
Brushed £39
Overall size: 1092/210 mm
Bowl size: 1041/159/160 mm
Minimum cabinet size: 1200 mm
1041
25
105
159
546
1092
210
Trough 3188W shown with Vinnata pull-out spray taps
see page 186
Waste Disposers
see page 258
59
Stainless Steel
Trough 3187W
Stainless Steel
Undermount
Profi Star shown with KWC Eve Light tap see page 165
PROFI STAR
Water-saving design
The Profi Star is probably the most versatile undermount sink ever. It combines unique
‘stepped’ walls with a series of coordinated accessories. The innovative shaped bowl is
also an excellent water-saving design. For most applications the water depth of the
smaller lower section of the bowl is sufficient by itself. This then leaves space in the
upper part of the bowl for the use of the accessories. Gauge 1.0mm.
Multi-functional in the tightest space
Profi Star
including waste and
accessories
Ref. PS51U £960
Installation: Undermount
Overall size: 562/452 mm
Bowl size: 534/424/200 mm
Cabinet size: 600 mm
The cutting board is a versatile, easy
to clean work surface
The drip tray can also be used on the
counter top as a surface for hot pans
60
The non-slip grater can be placed
directly over the colander
Endless combination options
make every task easier
The colander also fits into the
lower portion of the bowl
ACCESSORIES
Undermount
The space saving wall mounted rack
for accessories
The freestanding solution with base for
island units
Inclusive Accessories
Optional Accessories
Polished Finish
explained - page 6
2 Stainless Steel Colanders
Wall fastenings
Undermount Profile
Accessory Rack
Chopping Board
There are two ways to keep the
accessory modules within easy
reach at all times: the spacesaving
wall mounting or the base solution.
For the latter, a base plinth is cut
to size from the offcut of the counter
top eg. the bowl Cut-out. This is
fitted with the holder for the drip
tray, which offers convenient
mounting space for colanders and
a chopping board.
Coarse Grater
Fine Grater
Strainer Wastes
included with
all sinks
Optional
Pop-up Waste
£49
Grater Adaptor Wire Basket
Ref. 40798
Stainless Steel £209
(for all the above)
Waste Disposers
see page 258
61
Stainless Steel
The ingeniously coordinated
accessories will simplify every
stage of food preparation from
washing, soaking, draining,
chopping, slicing and grating.
The professional quality
accessories are always close to
hand, have them freestanding or wall mounted.
A modern take on a timeless classic, these two stainless steel Apron fronted sinks are the urban equivalent of their fireclay
cousins. The Belfast shares the same dimensions as the fireclay Belfast and therefore would fit any existing cabinetry as a
refurb. The Purismo Star, on the other hand, is built to a grander scale and has an ultra-modern slick appearance. They are
both manufactured from 1.2mm gauge steel that will ensure life long durability.
Apron Front
Stainless Steel
APRON FRONTED SINKS
Fit with solid surface worktops only - these include wood, granite or composite granite.
BELFAST
The Belfast comes complete
with a bowl grid to protect the
surface and act as a draining
surface. Also available are a
suspended wire draining basket
and a glass cutting board.
Best fitted with perimeter clear
to accommodate these optional
accessories.
Shown with drainer grid
Belfast
Ref. SBE600 £549
Supplied with bowl drainer grid
Stainless Steel Wire Drainer
Grid - included
62
Ref. BSBAK
Glass Cutting Board and Stainless Steel
Wire Demi Drainer £109
Installation: Apron Front
Overall size: 600/465/254 mm
Bowl size: 530/395/229 mm
Tap-Holes: No
Steel gauge: 1.2 mm
Apron Front
PURISMO STAR
The Purismo Star Belfast has total urban chic.
Manufactured in Switzerland from high grade
1.2mm gauge stainless steel this sink really
has the wow factor.
The stylish features include a unique 14mm
front profile adding a design subtlety that sets
it apart from its peers.
Brushed Finish
explained - page 6
Shown with KWC Ono pull-out spay monobloc see page 167
Strainer Wastes
included with
all sinks
Purismo Star
Ref. PUA 65 £562
Installation: Apron Front
Overall size: 762/508 mm
Bowl size: 650/400/230 mm
Tap-Holes: No
Steel gauge: 1.2 mm
Deluxe Strainer
Waste (upgrade)
Chrome £19
Brushed £24
Ref. 40909
Sliding Glass Cutting Board £74
Waste Disposers
see page 258
63
Stainless Steel
To be fitted with solid worktops - abutted or overlapped
Shannon Place
Tewkesbury Business Park
Tewkesbury
GL20 8SL
Telephone: 01684 299555
Fax: 01684 290958
Enquiries: sales@sterling.eu.com
To order: orders@sterling.eu.com
Website: www.sterling.eu.com

Similar documents