KLEENGUARD* Protective Clothing - Kimberly

KLEENGUARD*
Protective Clothing
KLEENGUARD* Coveralls:
Work in Safety. Work in Comfort.
Kimberly-Clark Professional is committed to delivering
solutions that help make workplaces safer, healthier, and
more productive, Solutions like KLEENGUARD* Coveralls,
which offers excellent protection while ensuring users
can work in comfort.
2
3
KLEENGUARD* Protective Clothing
Product Selector
Activity
Application
A20+
A20
A40
A71
8
9
11
12
Exposure to radioactive particles
Abatement/
remediation
Hazardous waste remediation
Lead abatement
Mould remediation
Animal waste
Agriculture
Fertilizer/pesticide application (dry/granular)
Pesticide application (liquid)
Biological
EN 14126
Biohazard handling, aerosol & liquid
Bodily fluids inc. blood
Light duty clean up/warehouse
Machine maintenance (vehicle/refinery)
Cleaning/
maintenance
Sewage
Industrial clean-up (general)
Tank cleaning & maintenance
Electronics
Fibreglass/insulation installation
General industry/
manufacturing
Food processing
Powder handling
Liquid chemical handling/transfer
Woodworking
Non-hazardous
Painting
Scientific
Metal/welding
Non-hazardous aerosols & liquids
Non-hazardous solids
Paint spraying
Powder coating
Pharmaceuticals
Metal particulate (chromium/beryllium)
Metal polishing
Page
suggested
alternative
The selector is a guide only. It is the responsibility of the employer to make sure the Coverall is suitable for its intended use. We suggest
that you always check the latest version of KIMBERLY-CLARK PROFESSIONAL* product literature to get more information about the
products or contact customer care at kcp.au@kcc.com.
All KLEENGUARD* Protective Clothing conforms to EN 340 recommendations for sizing.
Use the chart to help you select the right size garment.
Body measurements (cm)
4
Body measurements (cm)
Size
Height
Chest
Size
Height
Chest
S
164-170
96-104
XL
182-188
120-128
M
170-176
104-112
XXL
188-194
128-136
L
176-182
112-120
XXXL
194-200
136-144
5
KLEENGUARD* Product selector
Selecting the correct safety protective clothing product for your particular
circumstances can be difficult.
The following information may be helpful:
•A71 is our chemical protective coverall certified Cat III Type 3 (Liquid tight), Type 4 (Spray tight)
and Type 5 (Particle protection). For up-to-date information please visit our website
www.kcprofessional.com/uk/chemicalprotection.(1)
•A20+ is certified Cat III Type 5 (Particle protection) and Type 6 (Limited splash protection).
•A40 is a film laminate product that provides high levels of protection to the front where the majority of
contamination is likely to occur.
•A20+ is an SMS product that provides good levels of comfort due to breathability of the protective base-sheet.
Product
Test Method
A20+
High levels
of comfort
Type 3
A20
High Levels
of Comfort
A40
High Levels
of Protection
EN 14605:2005
Type 4
EN 14605:2005
EN ISO 13982-1:2004
Pass
Complies
Pass
Pass
Complies
Pass
Type 6
EN 13034:2005
EN 14126:2003 (A)
Surface Resistivity
EN 1149-5:2008
Radioactive dust
EN 1073-2:2002
Chemical
Protection
Pass
Type 5
Infective agents
A71
Pass
Pass
Pass
Pass
Pass
Complies
Pass
Pass
Pass
Pass
Fabric Tests
Abrasion resistance
EN 530 Method 2
2
Complies
6
6
Flex cracking resistance
ISO 7854 Method B
5 of 6 Visual
Complies
4
2
Trapezoidal tear resistance
ISO-9073-4
1/2* of 6
Complies
2
2
Tensile strength
EN ISO 13934-1
1
Complies
1
1
Seam strength
EN ISO 13935-2
3
Complies
3
3
Puncture resistance
EN 863
2
Complies
2
2
Resistance to ignition
EN13274.4 Method 3
EN1146: Pass
Complies
Pass
Pass
EN 368
Repellency to liquids
Resistance to penetration by liquids
EN ISO 6530 (30% H2SO4)
3
Complies
3
EN ISO 6530 (10% NaOH)
3
Complies
3
EN ISO 6530 (30% H2SO4)
3
Complies
3
EN ISO 6530 (10% NaOH)
3
Complies
3
EN 374:3
Resistance to permeation
EN 374:3 (30% H2SO4)
6
EN 374:3 (10% NaOH)
6
Whole Garment Tests (Tests performed with taping at wrists, ankles & hood)
Resistance to penetration by liquids
(spray test)
EN ISO 17941-4
(modified)
Pass
Complies
Pass
Pass
Determination of resistance of
suits to penetration by aerosols
and fine particles
EN ISO 13982-2 (Average
total inward leakage)
Average
10.9%
Complies
5.09%
4.13%
The selector is a guide only. It is the responsibility of the employer to make sure the protective clothing is suitable for its intended use. We suggest that you
always check the latest version of KIMBERLY-CLARK PROFESSIONAL* product literature to get more information about the products.
(1) For the latest information on Chemical protection, please visit our website: www.kcprofessional.com
6
KLEENGUARD*
Insights
Leading Consumer
Products Company
Our distributors told us that a leading
consumer products company presented
some unique challenges during the
maintenance of their cleaning powder
manufacturing facility.
We understand the build-up of residue on the production
machinery requires maintenance crews to regularly
dust everything off. The air can be thick with dislodged
dust making visibility difficult and worker protection
from airborne particles of paramount importance. The
maintenance crew need to be able to get into awkward
areas and complete the work in a hot and humid
environment.
We were told that their existing laminated coverall had
been selected to provide worker protection at the lightest
weight availability. The perception was that lightweight
would be comfortable to wear.
What was discovered when our distributor partner spoke to
the maintenance team was that the existing coveralls and
high humidity did not combine well. The workers were so
sweaty that they were changing their coverall a number
of times throughout their shift. Changing required leaving
their workstation or cleaning area, proceeding to another
area to re-suit up, put their protective equipment back on
and return to their task.
We were told that the workers appreciated the task and
environment made work conditions difficult but heat
stress and fatigue did impact worker health and safety. The
impact on workplace efficiency and worker health and
safety provided the impetus for safety review.
The KLEENGUARD* A20 coverall was recommended and
trialled by the maintenance crew. The product provided
fit for purpose worker protection and increased worker
comfort through fabric breathability.
Flexible and comfortable, the KleenGuard* Coveralls enable
dust and heat to coexist. The durability and wearability
significantly improve worker satisfaction and minimise the
need for mid-shift overall change.
7
KLEENGUARD* A20
Breathable Particle and Water-Based Liquid Spray Protection Coverall
Our Solution
Areas of Use
•Suitable for protection against
particles, fibres and light sprays
of water-based liquids.
• Handling powders
• General maintenance
•Construction
• Contract cleaning
Protection against dust, particles & light spray
Breathable fabric reduces the risk of heat stress
To provide high strength seams with barrier properties serged seams are
used with triple overlock stitching
Specially designed body, hood and waist for comfort and safety
Silicone free for critical areas
Single-use protective coverall complaint with Type 5/6 EN standards
High Performance SMS Fabric
Outer layer – cloth-like, yet strong and
abrasion-resistant spunbond polypropylene.
Middle layer – an intricate web of
microfibres that filters out many waterbased liquids and dry particulates.
Description
8
Size/Code
M
L
XL
XXL
XXXL
Colour
Case Contents
A20 Coverall
6411
6412
6413
6414
6415
Orange
20 × A20 Coverall
6421
6422
6423
6424
6425
White
20 × A20 Coverall
6431
6432
6433
6434
6435
Blue
20 × KLEENGUARD* A20+
Breathable Particle Protection Coverall
Our Solution
Areas of Use
•Provides protection against particles,
fibres and chemical splash
• Handling powders
• General maintenance
•Construction
• Contract cleaning
Protection against dust, particles & light spray
UPGRADED - new design for better fit. Thumb loops prevent sleeves
from riding up and provide increased wrist protection
Triple-stitched internal seams protect against tearing
Specially designed body, hood and waist for comfort and safety
Antistatic EN1149-1 for critical areas
Durable SMS fabric keeps out 99% of particles larger than 1 micron
(I.O.M Aloxite test)
Breathable fabric reduces the risk of heat stress
Silicone-free for critical areas
EN 1073-2 approved for radioactive dust protection1
Reduced packaging reduces waste. Small, compact size is ideal
for vending machines
(1) Provides no protection against radioactive radiation
A80
A 71
70
High Performance SMS Fabric
Outer layer – cloth-like, yet strong and
abrasion-resistant spunbond polypropylene.
Middle layer – an intricate web of
microfibres that filters out many waterbased liquids and dry particulates.
A 20+
CE0120
EN ISO 139821:2004
Type 5-B
Particle protection
Description
A20+ Coverall
EN 13034:2005
Type 6
Limited splash
protection
Size/Code
EN 14126:2003
Infective agents
protection
EN 1149-1:1995
Antistatic
A40
S
M
L
XL
XXL
XXXL
Colour
Case Contents
95150
95160
95170
95180
95190
95200
White
25 × A20
PPE Classification
Type
CAT III
5&6
9
9
KLEENGUARD*
Insights
Leading Marine
Engineering Company
We were told a leading marine
engineering company has rediscovered
the business benefits of KLEENGUARD*
quality and product performance.
Our distributor advised that although a long term buyer
of KLEENGUARD* coveralls, unforeseen changes in their
business circumstances was the catalyst for procurement
substituting a lower cost overall.
We understand this is hot and dusty work. The sanding of
fibreglass requires workers to be protected from airborne
particles and dust and personal protection equipment
including gloves, eye wear and overalls are critical.
Over the course of a day the manufacturing team need
a full range of movement, they bend and stretch, as they
work access to target areas can be awkward. The overall
needs to move with the worker. It needs to be flexible
and comfortable to wear.
With the need to reach and stretch to complete tasks came
the ripping of seams. The incumbent overall were regularly
replaced during a shift requiring the worker to leave their
station, walk 5 minutes back to the store, remove the
damaged overall and protective equipment, request another
overall, re-suit up, walk 5 minutes back and start again. This
resulted in wasted production time for the company and
frustration for the worker.
The distributor advised that as time progressed, inconsistent
supply of the alternative overall and the dependence the
customer has on overalls for worker health and safety,
re-opened the door for KLEENGUARD*.
Having previously selected the KLEENGUARD* A20 coveralls
for their fit, durability, flexibility and breathability product
attributes the customer was delighted to see that the product
was the same quality today as it was more than a decade ago.
We were told this resulted in procurement reassessing cost
and value. Although the unit cost of KLEENGUARD* A20
was slightly higher than the alternative product, the added
durability and flexibility meant one coverall would last
through a shift.
10
KLEENGUARD* A40
Water-based/Chemical Liquid and Particle Protection Coverall
Our Solution
Areas of Use
•Provides the best level of protection in the
Kimberly-Clark Type 5/6 range
•Is made from a high-performance film
laminate fabric, providing durability, strength
and protection
•Is low linting, minimising cross-contamination
•Provides protection against chemical splash and particles
•Paint spraying in Automotive
and Aerospace
• Pharmaceutical industries
•Manufacturing
•Utilities
•Electronics
•Agriculture
Protection against chemical splash and particles
Specially designed body, hood and waist for comfort and safety
Strong triple-stitched seams help protect against tearing
Full length zip, facilitates putting on/taking off garment
Low-lint performance, film laminate and internal seams help reduce
levels of lint
Film laminate technology provides a barrier against a wide range
of chemicals
Particle protection, keeps out > 99% of fibres greater than 1 micron
Antistatic fabric EN 1149-1 for critical areas
Silicone-free, ideal for paint-spraying
EN 1073-2 approved for radioactive dust protection1
Compressed packaging provides auto-dispensing system and
reduces storage space
A80
Sealed polybags for low contamination risk
(1) Provides no protection against radioactive radiation
High Performance Clothing Fabric
Outer layer – film coating resists splash and
spray from many liquids and dry particulates.
Inner layer – cloth-like, yet tough and
abrasion-resistant spunbond polypropylene.
CE0120
EN ISO 139821:2004
Type 5
Particle protection
Description
A40 Coverall
EN 13034:2005
Type 6
Limited splash
protection
Size/Code
EN 1073-2:2002
Radioactive dust
contamination
protection
EN 1149-1:1995
Antistatic
A40
S
M
L
XL
XXL
XXXL
Colour
Case Contents
99790
99791
99792
99793
99794
99795
White
25 × PPE Classification
Type
CAT III
5&6
(2) For the latest information on Chemical protection, please visit our website: www.kcprofessional.com.au
11
KLEENGUARD* A71
Chemical Permeation and Liquid Jet Protection Coverall
Our Solution
Areas of Use
•Suitable for handling of aqueous
chemicals, low pressure industrial
cleaning and maintenance
• Viral and biohazard clean up
• Handling of aqueous chemicals
•Low pressure industrial cleaning
and maintenance
• Oil & Gas industry
• Food Processing industry
Protection against aqueous chemical jet & spray(1)
Durable film laminate with sewn and taped seams provides a strong
barrier to chemical spray
Sewn and taped seams with tear resistant fabric offer a strong
liquid-tight barrier
Storm-flap and hood designed for easier taping to a respirator
Elasticated hood, cuffs and waist designed for better comfort and safety
Highly visible for improved worker safety
Silicone-free and anti-static fabric EN 1149-1 for critical areas
EN 14126 approved for infective agents protection
EN 1073-2 approved for radioactive dust protection1
(1) Provides no protection against radioactive radiation
High Performance Clothing Fabric
Outer layer – film coating resists splash and
spray from many liquids and dry particulates.
Inner layer – cloth-like, yet tough and
abrasion-resistant spunbond polypropylene.
A80
CE0120
Description
A71 Coverall
EN 14605:2005
Type 3
Liquid tight
clothing
EN 14605:2005
Type 4-B
Spray tight
clothing
EN ISO 139821:2004
Type 5-B
Particle protection
Size/Code M
96760
EN 1073-2:2002
Radioactive dust
contamination
protection
EN 14126:2003
Infective agents
protection
EN 1149-1:1995
Antistatic
L
XL
XXL
XXXL
Colour
96770
96780
96790
96800
Yellow
Case Contents
10 × (2) For the latest information on Chemical protection, please visit our website: www.kcprofessional.com
12
A 71
A 71
70
PPE Classification
Type
CAT III
3, 4 & 5
KLEENGUARD*
Insights
Leading Consumer
Products Company
Our distributor said that at a leading
consumer products company,
production efficiency centered around
preventative quarterly maintenance and
regular product changeover cleaning.
We were told that to change the manufacturing of one
product line to another, the line is shut down, thoroughly
scrubbed and completely cleaned using detergent and high
pressure hoses.
The maintenance team use coveralls to protect their
clothing from damage during cleaning. As they need to get
into difficult to reach places they need to be flexible and
agile and not be constrained by the fit of their coverall.
We were told that the customer was dissatisfied with
the performance of their existing coverall. Their workers
found the product regularly ripped when completing
normal work tasks and were uncomfortable to wear, even
more so in hot and humid conditions.
As the product usage continued to climb with workers
replacing ripped coveralls during a shift the customer
approached the distributor for other options. The
distributor offered three alternative products for customer
trial including the KLEENGUARD* A20.
We understand after rigorous user testing the KLEENGUARD*
A20 was chosen as the best fit for purpose coverall
available. As a more robust product, less coveralls were
required per shift, reducing waste and replacement costs.
The maintenance team valued the comfort and fit as highly
as they rated the KLEENGUARD* flexibility and durability.
The KLEENGUARD* A20 allowed for an increased range of
movement and performed at its best for the entire shift.
The breathability of the coverall reduced worker discomfort
from heat and humidity.
For more information, please visit www.kcprofessional.com.au
13
Industries
OIL & GAS
AUTOMOTIVE
AVIATION
FOOD PROCESSING
MINING
SHIPPING
PHARMACEUTICAL
14
At Kimberly-Clark
Professional, Safety
Is Paramount
Kimberly Clark Professional* is deeply committed
to safety. Our legacy of safety spans more than 140
years and involves more than 30,000 employees in
manufacturing globally.
Our focus on safety underpins our enviable safety
record. At Kimberley-Clark Professional safety is a value,
not a priority. Keeping our people safe and productive
is at the core of everything we do. We share this safety
ethos with our clients to create exceptional workplaces.
Workplaces that are healthier, safer and more productive.
The safety business is a growing at 25 – 30% in growth
markets. The existing product brands in Safety are
KleenGuard *& Jackson Safety*.
We are committed to building out , innovating or
differentiating to create a robust Safety bundle that
are solutions to end users’ needs
Why partner with
Kimberly-Clark
Professional
•Relationships are important. Our commitment to
create exceptional workplaces for our customers will
create consumables management opportunities for
our distributors.
•Our Safety business is forecast to grow at more than
20% per annum in growth markets . We’d love you to
enjoy the benefits of growth.
•We are continuing to develop and expand our Safety
solutions. A range of safety products allows for
broader consumables engagement with the end user.
•Our expertise in industrial markets provides our
customers and distributors with access to the
knowledge and experiences of a global team
15
Kimberly-Clark Australia Pty Ltd
52 Alfred Street, Milsons Point NSW 2061 Australia
Tel: 61-2-99638888
SALES OFFICES
Sydney Telephone (02) 9889 8871 Facsimile (02) 9889 8891 Melbourne Brisbane
Telephone (03) 9550 8055 Telephone (07) 3213 1155
Facsimile (03) 9550 8099 Facsimile (07) 3213 1188
CUSTOMER ORDER CENTRE Telephone 1800 810 077 Facsimile 1800 812 255
CUSTOMER CARE – HELPLINE
1800 647 994 New Zealand 0800 447 814 Email kcp.au@kcc.com www.kcprofessional.com Nothing herein contained shall exclude, restrict
or modify our liability under the Trade Practices
Act 1974 or any other legislation of a State or Territory
of the Commonwealth of Australia or New Zealand.
® Registered Trademark / *Trademark Kimberly-Clark Worldwide, Inc. © 2015 KCWW