Hydraulic Hose Fittings

Hydraulic Hose Fittings - Introduction
These hose fittings are offered to create hydraulic hose assemblies with British Standard Pipe (BSP) or Metric end connections.
The fittings are a two piece design, with separate hose collars and stems. The stems are common for all hose types, and the
collars used are specific by hose type (except in the case of multi-spiral inserts). The following types of hose can be used with
these fittings (with the appropriate collars):
SAE 100R1A - (Skive)
SAE 100R7 - (Thermoplastic)
SAE 100R1AT - (No Skive)
SAE 100R8 - (Thermoplastic)
SAE 100R2 - (Skive)
SAE 100 R12 - (Skive)
SAE 100R2AT - (No Skive)
The hose fittings listed in this section are stocked in plated steel only. Fittings in stainless steel are available on request. For
stainless steel, add -SS to the part numbers in this section.
Connections to Metric Tubing and Tube Fittings: The hose fittings for connection to metric tubing or DIN 2353 tube
fittings are listed by the fitting thread size. The following chart lists the thread sizes corresponding to metric tube sizes.
Tube Size
Series
Thread Size
Tube Size
Series
Thread Size
4mm
5mm
6mm
6mm
6mm
8mm
8mm
8mm
10mm
10mm
12mm
12mm
4-LL
5-LL
6-LL
6-L
6-S
8-LL
8-L
8-S
10-L
10-S
12-L
12-S
8x1
10x1
10x1
12x1.5
14x1.5
12x1
14x1.5
16x.15
16x1.5
18x1.5
18x1.5
20x1.5
14mm
15mm
16mm
18mm
20mm
22mm
25mm
28mm
30mm
35mm
38mm
42mm
14-S
15-L
16-S
18-L
20-S
22-L
25-S
28-L
30-S
35-L
38-S
42-L
22x1.5
22x1.5
24x1.5
26x1.5
27x2
30x2
36x2
36x2
42x2
45x2
52x2
52x2
Connections Using British Standard Pipe (BSP) Threads
British Standard Pipe is most commonly used as British Standard Pipe Parallel (BSPP), sealed with a 60E cone seat (solid male
thread, swivel female thread). The BSPP male threads may also be used in ports, using a rubber or copper washer seal. BSP
flat face is BSPP thread with a flat surface at the nose of the thread for sealing. This is most commonly used on HIAB equipment.
BSP male threads may also be tapered (BSPT), and can be used in either BSPP female or BSPT female ports with a suitable
thread sealant. BSPT is commonly used on Japanese equipment and is part of the JIS standard. BSP thread sizes are listed in
the following table:
Dash Size
-02
-04
-06
-08
-10
Nominal Thread
1/8 - 28
1/4 - 19
3/8 - 19
½ - 14
5/8 - 14
Thread O.D.
0.383
0.518
0.656
0.825
0.930
Dash Size
-12
-16
-20
-24
-32
Nominal Thread
3/4 - 14
1 - 11
1 1/4 - 11
1 ½ - 11
2 - 11
Thread O.D.
1.041
1.309
1.650
1.882
2.347
Standard Hose Fittings, Hose and Hose Assemblies
We carry the Gates line of hose and hose couplings and can provide loose couplings, hose or complete assemblies as required.
Hoses range from general purpose to hydraulic, in sizes from 3/16" to 2" and pressures up to 10,000 psi. For more information,
please see the Gates catalogue.
Custom Hose Stems
Hose stems may be manufactured by Williams Fluidair for most requirements. We have CNC controlled equipment, can
manufacture fittings to your drawings and provide design and manufacture services.
Hose Fittings: Introduction
Williams Fluidair Corporation Limited
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Hydraulic Hose Fittings Index
METRIC
HYDRAULIC
BRITISH
HOSE
STANDARD
PIPE
FITTINGS
(B S P)
Crimp Ferrules
Skive - No Skive
Page 1
British Standard Pipe
(BSP) Male 60° Cone
Page 2
British Standard Pipe
(BSP) Male Flat Seat
Page 2
British Standard Pipe
Male Tapered (BSPT)
Page 2
British Standard Pipe
(BSP) Swivel Female
Page 3
British Standard Pipe
(BSP) Swivel Female
45° Elbow
Page 4
British Standard Pipe
(BSP) Swivel Female
90° Elbow
Page 4
British Standard Pipe
(BSP) Female Swivel
with O-ring
Page 5
British Standard Pipe
(BSP) Swivel Female
45° Elbow with O-ring
Page 5
British Standard Pipe
(BSP) Swivel Female
90° Elbow with O-ring
Page 5
British Standard Pipe
(BSP) Swivel Female
Flat Seat
Page 3
DIN 2353 METRIC : L-SERIES
Metric Standpipe
Straight
Page 6
Metric Standpipe
45° Elbow
Page 6
Metric Standpipe
90° Elbow
Page 6
Metric Male
L-Series
Page 7
Female Swivel
L-Series
with O-ring
Page 7
Female Swivel
L-Series
45° Elbow with O-ring
Page 7
Female Swivel
L-Series
90° Elbow with O-ring
Page 7
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Hose Fittings: Index
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Hydraulic Hose Fittings Index
DIN 2353 METRIC : S-SERIES
Metric Male
S-Series
Page 8
Female Swivel
S-Series
with O-ring
Page 8
Female Swivel
S-Series
45° Elbow with O-ring
Page 8
JIS
Japanese Standard
(JIS) Metric Male
Page 9
Japanese Standard
(JIS) Female Swivel
Page 9
STANDARD
Japanese Standard
(JIS) Female Swivel
45° Elbow
Page 10
MISCELLANEOUS
Banjo Hose Fitting
Page 11
JIS Female Swivel
30E Flare Seat
Page 11
Low Pressure &
General Purpose
Hose
Page 14
Fittings for Low
Pressure Hoses
Page 15-18
Female Swivel
S-Series
90° Elbow with O-ring
Page 8
Japanese Standard
(JIS) Female Swivel
90° Elbow
Page 10
METRIC
Pressure Washer
Page 11
METRIC
HOSE
Hollow Bolt for Banjo
Hose Fittings
Pages 12
FITTINGS
Copper Washer for
Banjo Hose Fittings
Page 12
Reusable Hose Ends
Steel, Various
Page 13
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Hose Fittings: Index
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Hydraulic Hose Fittings Index
STAINLESS
STAINLESS
Hose Type
Stainless Steel
R1A, R2A, R12, R1T, Braided Smooth Bore
R2AT, R7 and R8
Teflon Actual Hose ID
Page 19
Page 20
STAINLESS
BSPP Male Flat Seat
Page 21
BSPP Swivel Female
45E Elbow
Page 24
BSPP Swivel Female
90E Elbow
Page 24
Metric Standpipe
Straight
Page 25
STEEL
CRIMP
BSP,NPT,BSPT
NPT Male
Page 22
STEEL
Metric Standpipe
45E Elbow
Page 25
HOSE
FITTINGS
FERRULES
Stainless Steel
Braided Convoluted
Teflon Hose
Page 20
STEEL
BSPP Male 60E Cone
Page 21
STAINLESS
STEEL
BSPT Male Tapered
Page 22
STANDPIPE
HOSE
FITTINGS
BSPP Swivel Female
Page 23
HOSE
BSPP Swivel
Female Flat Seat
Page 23
FITTINGS
Metric Standpipe
90E Elbow
Page 25
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Hose Fittings: Index
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Hydraulic Hose Fittings Index
STAINLESS
Metric Male 24E
L Series
Page 26
STEEL
Female Swivel 24E
with O-Ring
L Series
Page 26
STAINLESS
Metric Male 24E
Page 28
DIN2353
Female Swivel
24E 45E
Elbow with O-Ring
Page 27
STEEL
Female Swivel 24E
with O-Ring
S Series
Page 28
Male JIC
Page 29
STAINLESS
Code 61 Flange
Page 31
STEEL
Code 61 Flange 45E
Page 31
S-SERIES
JIC
Female JIC 45E
Page 30
STEEL
FITTINGS
TUBE
FITTINGS
Female Swivel
24E 90E
Elbow with O-Ring
Page 28
Female Swivel
24E 45E
Elbow with O-Ring
Page 28
Female JIC
Page 29
TUBE
Female Swivel
24E 90E
Elbow with O-Ring
Page 27
DIN2353
STAINLESS
L-SERIES
HOSE
FITTINGS
Female JIC 90E
Page 30
CODE
61
Code 61 Flange 90E
Page 31
&
Code 62 Flange
Page 32
CODE
62
Code 62 Flange 45E
Page 32
FLANGE
Code 62 Flange 90E
Page 32
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Hose Fittings: Index
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Hydraulic Hose Fittings Index
MISCELLANEOUS
Banjo Hose End
RNM/RNR
Page 33
STAINLESS
STEEL
HOSE
FITTINGS
Hollow Bolt F15
Page 33
INTERLOCK
HOSE
FITTINGS
316SS INTERLOCK CRIMP FERRULES & NPT HOSE FITTING
S
Crimp Ferrule 4SH
Hose Interlock
Page 34
Crimp Ferrule 100R13
Hose Interlock
Page 34
316SS
Male BSPP
Interlock
Page 35
Male DIN2353
S Series Interlock
Page 36
INTERLOCK
Female BSPP
Interlock
Page 35
316SS
Male NPT Interlock
Page 34
Female BSPP
45E Interlock
Page 35
INTERLOCK
Female DIN 2353
Interlock
Page 36
BSPP
FITTINGS
Female BSPP
90E Interlock
Page 35
DIN2353
Female DIN 2353
45E Interlock
Page 36
HOSE
HOSE
FITTINGS
Female DIN 2353
90E Interlock
Page 36
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Hose Fittings: Index
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Hydraulic Hose Fittings Index
316SS
Male JIC Interlock
Page 37
INTERLOCK
Female JIC Interlock
Page 37
JIC
Female JIC 45E
Interlock
Page 37
HOSE
FITTINGS
Female JIC 90E
Interlock
Page 37
316SS INTERLOCK CODE 61 & 62 FLANGE HOSE FITTINGS
Code 61 Flange
Interlock
Page 38
Code 61 Flange 45E
Interlock
Page 38
Code 61 Flange 90E
Interlock
Page 38
Code 62 Flange
Interlock
Page 39
Code 62 Flange 45E
Interlock
Page 39
Code 62 Flange 90E
Interlock
Page 39
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Hose Fittings: Index
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Crimp Ferrules for Hydraulic Hose Fittings
Skive
Type
Skive
Type
No
Skive
Hose Size
Hose Type: R1A
Hose Type: R2A + R12
Hose Type: R1T + R2AT
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1"
1-1/4
1-1/2
2"
PF-1-03
PF-1-04
PF-1-05
PF-1-06
PF-1-08
PF-1-10
PF-1-12
PF-1-16
PF-1-20
PF-1-24
PF-1-32
PF-2-03
PF-2-04
PF-2-05
PF-2-06
PF-2-08
PF-2-10
PF-2-12
PF-2-16
PF-2-20
PF-2-24
PF-2-32
PF-1T/2T-03
PF-1T/2T-04
PF-1T/2T-05
PF-1T/2T-06
PF-1T/2T-08
PF-1T/2T-10
PF-1T/2T-12
PF-1T/2T-16
PF-1T/2T-20
PF-1T/2T-24
PF-1T/2T-32
Hose Size
Hose Type: R7 & R8
Stainless Steel Braided
Smooth Bore Teflon Hose
Actual Hose ID
Stainless Steel Braided
Convoluted Teflon Hose
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1"
1-1/4
1-1/2
2"
PF-7-03
PF-7-04
PF-7-05
PF-7-06
PF-7-08
PF-7-10
PF-7-12
PF-7-16
PTTB-04
PTTC-04
PTTB-06
PTTB-08
PTTB-10
PTTB-12
PTTB-16
PTTC-06
PTTC-08
PTTC-10
PTTC-12
PTTC-16
PTTC-20
PTTC-24
PTTC-32
All ferrules m ust be crim ped full length, preferably with an 8-finger crim per.
Crim p specifications available.
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 1 of 39
British Standard Pipe (BSP) Hose Fittings
Hose
Size
BSP
Size
Thread
Size
BSPP Male 60E Cone
1/8
1/8
1/8 – 28
AGR-02-02
1/8
1/4
1/4 – 19
AGR-02-04
3/16
1/8
1/8 – 28
AGR-03-02
3/16
1/4
1/4 – 19
AGR-03-04
1/4
1/8
1/8 – 28
AGR-04-02
1/4
1/4
1/4 – 19
AGR-04-04
BSPP Male Flat Seat
BSPT Male Tapered
AGR-K-03-02
AGR-K-04-02
AGR-F-04-04
AGR-K-04-04
1/4
3/8
3/8 – 19
AGR-04-06
5/16
3/8
3/8 – 19
AGR-05-06
3/8
1/4
1/4 – 19
AGR-06-04
3/8
3/8
3/8 – 19
AGR-06-06
AGR-F-06-06
AGR-K-06-06
3/8
1/2
1/2 – 14
AGR-06-08
AGR-F-06-08
AGR-K-06-08
1/2
3/8
3/8 – 19
AGR-08-06
1/2
1/2
1/2 – 14
AGR-08-08
AGR-F-08-08
AGR-K-08-08
1/2
5/8
5/8 – 14
AGR-08-10
1/2
3/4
3/4 – 14
AGR-08-12
5/8
5/8
5/8 – 14
AGR-10-10
5/8
3/4
3/4 – 14
AGR-10-12
3/4
3/4
3/4 – 14
AGR-12-12
AGR-F-12-12
AGR-K-12-12
3/4
1"
1 – 11
AGR-12-16
AGR-F-12-16
AGR-K-12-16
1"
1"
1 – 11
AGR-16-16
AGR-F-16-16
AGR-K-16-16
1"
1-1/4
1 1/4– 11
AGR-16-20
AGR-F-16-20
AGR-K-16-20
AGR-F-20-20
AGR-K-20-20
1
1-1/4
1-1/4
1 /4 – 11
AGR-20-20
1-1/4
1-1/2
1 1/2 – 11
AGR-20-24
1
AGR-K-04-06
AGR-F-05-06
AGR-K-05-06
AGR-K-06-04
AGR-K-08-10
AGR-F-10-10
AGR-K-10-10
AGR-K-10-12
AGR-K-20-24
1-1/2
1-1/2
1 /2 – 11
AGR-24-24
AGR-F-24-24
AGR-K-24-24
2"
2"
2 – 11
AGR-32-32
AGR-F-32-32
AGR-K-32-32
BSP Parallel threads m ay be used in ports (with appropriate seals)
or in BSP fem ale swivel connections (sealing on the 60E cone).
The flat seat BSPP fittings are most often seen on HIAB cranes
BSP Taper threads can also be used in applications requiring Japanese (JIS) m ale threads
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 2 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
British Standard Pipe (BSP) Hose Fittings
Hose
Size
BSP
Size
Thread
Size
BSPP Swivel Female
1/8
1/8
1/8 – 28
DKR-02-02
1/8
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
1"
1"
1-1/4
1-1/4
1-1/2
1-1/2
2"
1/4
1/8
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/4
3/8
1/2
3/8
1/2
5/8
3/4
1/2
5/8
3/4
3/4
1"
1"
1-1/4
1-1/4
1-1/2
1-1/2
2"
2"
1/4 – 19
1/8 – 28
1/4 – 19
1/8 – 28
1/4 – 19
3/8 – 19
1/2 – 14
1/4 – 19
3/8 – 19
1/4 – 19
3/8 – 19
1/2 – 14
3/8 – 19
1/2 – 14
5/8 – 14
3/4 – 14
1/2 – 14
5/8 – 14
3/4 – 14
3/4 – 14
1 – 11
1 – 11
11/4 – 11
11/4 – 11
11/2 – 11
11/2 – 11
2 – 11
2 – 11
DKR-02-04
DKR-03-02
DKR-03-04
DKR-04-02
DKR-04-04
DKR-04-06
DKR-04-08
DKR-05-04
DKR-05-06
DKR-06-04
DKR-06-06
DKR-06-08
DKR-08-06
DKR-08-08
DKR-08-10
DKR-08-12
DKR-10-08
DKR-10-10
DKR-10-12
DKR-12-12
DKR-12-16
DKR-16-16
! DKR-16-20
! DKR-20-20
! DKR-20-24
! DKR-24-24
! DKR-24-32
! DKR-32-32
BSPP Swivel Female Flat Seat
DKR-F-04-04
DKR-F-04-06
DKR-F-04-08
DKR-F-05-06
DKR-F-06-06
DKR-F-06-08
DKR-F-08-06
DKR-F-08-08
DKR-F-08-12
DKR-F-10-12
DKR-F-12-12
DKR-F-16-16
DKR-F-20-20
DKR-F-24-24
DKR-F-32-32
! Sizes 1-1/4" BSP and above will only be available with o-ring seal (See DKOR- fittings) once stock is depleted.
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 3 of 39
British Standard Pipe (BSP) Hose Fittings
Hose
Size
BSP
Size
Thread
Size
BSPP Swivel Female 45E Elbow
BSPP Swivel Female 90E Elbow
3/16
1/8
1/8 – 28
DKR-45-03-02
DKR-90-03-02
3/16
1/4
1/4 – 19
DKR-45-03-04
DKR-90-03-04
1/4
1/8
1/8 – 28
DKR-45-04-02
DKR-90-04-02
1/4
1/4
1/4 – 19
DKR-45-04-04
DKR-90-04-04
1/4
3/8
3/8 – 19
DKR-45-04-06
DKR-90-04-06
1/4
1/2
1/2 – 14
DKR-45-04-08
DKR-90-04-08
5/16
3/8
3/8 – 19
DKR-45-05-06
DKR-90-05-06
3/8
3/8
3/8 – 19
DKR-45-06-06
DKR-90-06-06
3/8
1/2
1/2 – 14
DKR-45-06-08
DKR-90-06-08
1/2
1/2
1/2 – 14
DKR-45-08-08
DKR-90-08-08
1/2
5/8
5/8 – 14
DKR-45-08-10
DKR-90-08-10
1/2
3/4
3/4 – 14
DKR-45-08-12
DKR-90-08-12
5/8
1/2
1/2 – 14
DKR-45-10-08
DKR-90-10-08
5/8
5/8
5/8 – 14
DKR-45-10-10
DKR-90-10-10
5/8
3/4
3/4 – 14
DKR-45-10-12
DKR-90-10-12
3/4
3/4
3/4 – 14
DKR-45-12-12
DKR-90-12-12
3/4
1"
1 – 11
DKR-45-12-16
DKR-90-12-16
1"
1"
1 – 11
DKR-45-16-16
DKR-90-16-16
1
1"
1-1/4
1 /4 – 11
! DKR-45-16-20
! DKR-90-16-20
1-1/4
1-1/4
11/4 – 11
! DKR-45-20-20
! DKR-90-20-20
! DKR-90-20-24
1
1-1/4
1-1/2
1 /2 – 11
! DKR-45-20-24
1-1/2
1-1/2
11/2 – 11
! DKR-45-24-24
! DKR-90-24-24
1-1/2
2"
2 – 11
! DKR-45-24-32
! DKR-90-24-32
2"
2"
2 – 11
! DKR-45-32-32
! DKR-90-32-32
! Sizes 1-1/4" BSP and above will only be available with o-ring seal (See DKOR- fittings) once stock is depleted.
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 4 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
BSP Female Swivel O-Ring Hose Fittings
Hose
Size
BSP
Size
BSPP Female Swivel With
O-Ring
BSPP Female Swivel
45E Elbow With O-Ring
BSPP Female Swivel
90E Elbow With O-Ring
1/4
1/4
DKOR-04-04
DKOR-45-04-04
DKOR-90-04-04
3/8
3/8
DKOR-06-06
DKOR-45-06-06
DKOR-90-06-06
1/2
1/2
DKOR-08-08
DKOR-45-08-08
DKOR-90-08-08
5/8
5/8
DKOR-10-10
DKOR-45-10-10
DKOR-90-10-10
3/4
3/4
DKOR-12-12
DKOR-45-12-12
DKOR-90-12-12
1"
1"
DKOR-16-16
DKOR-45-16-16
DKOR-90-16-16
1"
1-1/4
DKOR-16-20
DKOR-45-16-20
DKOR-90-16-20
1-1/4
1-1/4
DKOR-20-20
DKOR-45-20-20
DKOR-90-20-20
1-1/4
1-1/2
DKOR-20-24
DKOR-45-20-24
DKOR-90-20-24
1-1/2
1-1/2
DKOR-24-24
DKOR-45-24-24
DKOR-90-24-24
1-1/2
2"
DKOR-24-32
DKOR-45-24-32
DKOR-90-24-32
2"
2"
DKOR-32-32
DKOR-45-32-32
DKOR-90-32-32
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 5 of 39
Metric Standpipe Hose Fittings
Hose
Size
Standpipe
Size
Metric Standpipe Straight
Metric Standpipe
45E Elbow
Metric Standpipe
90E Elbow
3/16
6mm
BEM-03-06
BEM-45-03-06
BEM-90-03-06
3/16
8mm
BEM-03-08
BEM-45-03-08
BEM-90-03-08
1/4
6mm
BEM-04-06
BEM-45-04-06
BEM-90-04-06
1/4
8mm
BEM-04-08
BEM-45-04-08
BEM-90-04-08
1/4
10mm
BEM-04-10
BEM-45-04-10
BEM-90-04-10
1/4
12mm
BEM-04-12
BEM-45-04-12
BEM-90-04-12
5/16
8mm
BEM-05-08
BEM-45-05-08
BEM-90-05-08
5/16
10mm
BEM-05-10
BEM-45-05-10
BEM-90-05-10
5/16
12mm
BEM-05-12
BEM-45-05-12
BEM-90-05-12
3/8
10mm
BEM-06-10
BEM-45-06-10
BEM-90-06-10
3/8
12mm
BEM-06-12
BEM-45-06-12
BEM-90-06-12
3/8
14mm
BEM-06-14
BEM-45-06-14
BEM-90-06-14
3/8
15mm
BEM-06-15
BEM-45-06-15
BEM-90-06-15
1/2
14mm
BEM-08-14
BEM-45-08-14
BEM-90-08-14
1/2
15mm
BEM-08-15
BEM-45-08-15
BEM-90-08-15
1/2
16mm
BEM-08-16
BEM-45-08-16
BEM-90-08-16
1/2
18mm
BEM-08-18
BEM-45-08-18
BEM-90-08-18
5/8
18mm
BEM-10-18
BEM-45-10-18
BEM-90-10-18
5/8
20mm
BEM-10-20
BEM-45-10-20
BEM-90-10-20
3/4
20mm
BEM-12-20
BEM-45-12-20
BEM-90-12-20
3/4
22mm
BEM-12-22
BEM-45-12-22
BEM-90-12-22
3/4
25mm
BEM-12-25
BEM-45-12-25
BEM-90-12-25
1"
28mm
BEM-16-28
BEM-45-16-28
BEM-90-16-28
1"
30mm
BEM-16-30
BEM-45-16-30
BEM-90-16-30
1-1/4
35mm
BEM-20-35
BEM-45-20-35
BEM-90-20-35
1-1/4
38mm
BEM-20-38
BEM-45-20-38
BEM-90-20-38
1-1/2
42mm
BEM-24-42
BEM-45-24-42
BEM-90-24-42
Stand pipes are m ost often used to connect hose to DIN 2353 tube fittings.
This is a convenient way to com bine hose and tubing in an installation.
For spiral hose applications, use the DKOL- and DKOS- hose ends.
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 6 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Metric Hose Fittings for DIN 2353 Tube Fittings (L Series, 24E Cone)
Hose
Size
Tube
Size
Thread
Size
Metric Male 24E
Female Swivel 24E with O-Ring
1/4
5/16
3/8
3/8
1/2
5/8
3/4
1"
1-1/4
1-1/2
8-L
10-L
10-L
12-L
15-L
18-L
22-L
28-L
35-L
42-L
M14x1.5
M16x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2
M36x2
M45x2
M52x2
CEL-04-14
CEL-05-16
CEL-06-16
CEL-06-18
CEL-08-22
CEL-10-26
CEL-12-30
CEL-16-36
CEL-20-45
CEL-24-52
DKOL-04-14
DKOL-05-16
DKOL-06-16
DKOL-06-18
DKOL-08-22
DKOL-10-26
DKOL-12-30
DKOL-16-36
DKOL-20-45
DKOL-24-52
Hose
Size
Tube
Size
Thread
Size
Female Swivel 24E 45E
Elbow & O-Ring
Female Swivel 24E 90E
Elbow & O-Ring
1/4
5/16
3/8
3/8
1/2
5/8
3/4
1"
1-1/4
1-1/2
8-L
10-L
10-L
12-L
15-L
18-L
22-L
28-L
35-L
42-L
M14x1.5
M16x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2
M36x2
M45x2
M52x2
DKOL-45-04-14
DKOL-45-05-16
DKOL-45-06-16
DKOL-45-06-18
DKOL-45-08-22
DKOL-45-10-26
DKOL-45-12-30
DKOL-45-16-36
DKOL-45-20-45
DKOL-45-24-52
DKOL-90-04-14
DKOL-90-05-16
DKOL-90-06-16
DKOL-90-06-18
DKOL-90-08-22
DKOL-90-10-26
DKOL-90-12-30
DKOL-90-16-36
DKOL-90-20-45
DKOL-90-24-52
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 7 of 39
Metric Hose Fittings for DIN 2353 Tube Fittings (S Series, 24E Cone)
Hose
Size
Tube
Size
Thread
Size
Metric Male 24E
Female Swivel 24E with O-Ring
1/4
5/16
3/8
3/8
1/2
5/8
3/4
1"
1-1/4
10-S
12-S
12-S
14-S
16-S
20-S
25-S
30-S
38-S
M18x1.5
M20x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2
M36x2
M42x2
M52x2
CES-04-18
CES-05-20
CES-06-20
CES-06-22
CES-08-24
CES-10-30
CES-12-36
CES-16-42
CES-20-52
DKOS-04-18
DKOS-05-20
DKOS-06-20
DKOS-06-22
DKOS-08-24
DKOS-10-30
DKOS-12-36
DKOS-16-42
DKOS-20-52
Hose
Size
Tube
Size
Thread
Size
Female Swivel 24E 45E Elbow & O-Ring
Female Swivel 24E 90E Elbow & O-Ring
1/4
5/16
3/8
3/8
1/2
5/8
3/4
1"
1-1/4
10-S
12-S
12-S
14-S
16-S
20-S
25-S
30-S
38-S
M18x1.5
M20x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2
M36x2
M42x2
M52x2
DKOS-45-04-18
DKOS-45-05-20
DKOS-45-06-20
DKOS-45-06-22
DKOS-45-08-24
DKOS-45-10-30
DKOS-45-12-36
DKOS-45-16-42
DKOS-45-20-52
DKOS-90-04-18
DKOS-90-05-20
DKOS-90-06-20
DKOS-90-06-22
DKOS-90-08-24
DKOS-90-10-30
DKOS-90-12-36
DKOS-90-16-42
DKOS-90-20-52
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 8 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Metric Hose Fittings 60E/ 24E Cone Seat
Hose
Size
Thread
Size
Metric Male 60E Cone
Metric Female Swivel
3/16
M10x1
AGM-03-10
DKM-03-10
1/4
M12X1.5
AGM-04-12
DKM-04-12
1/4
M14X1.5
AGM-04-14
DKM-04-14
5/16
M16X1.5
AGM-05-16
DKM-05-16
5/16
M18X1.5
AGM-05-18
DKM-05-18
3/8
M16X1.5
AGM-06-16
DKM-06-16
3/8
M18X1.5
AGM-06-18
DKM-06-18
3/8
M22X1.5
AGM-06-22
DKM-06-22
1/2
M18X1.5
AGM-08-18
DKM-08-18
1/2
M20X1.5
AGM-08-20
DKM-08-20
1/2
M22X1.5
AGM-08-22
DKM-08-22
5/8
M26X1.5
AGM-10-26
DKM-10-26
3/4
M26X1.5
AGM-12-26
DKM-12-26
3/4
M30X1.5
AGM-12-30
DKM-12-30
1"
M38X1.5
AGM-16-38
DKM-16-38
1-1/4
M45X1.5
AGM-20-45
DKM-20-45
1-1/2
M52X1.5
AGM-24-52
DKM-24-52
2"
M65X2
AGM-32-65
DKM-32-65
Notes:
1.
AGM- hose ends may be used as a port fitting (using an appropriate seal) or may connect to a female swivel
fitting with a 60E cone seat.
2.
The female swivel fittings (DKM-, DKM-45-, and DKM-90-) may also be used to connect to DIN 2353-L tube
fittings with the corresponding thread size. This only applies up to thread size M26x1.5 (18-L tube size).
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 9 of 39
Metric Hose Fittings 60E/ 24E Cone Seat
Hose
Size
Thread
Size
Female Swivel 45E Elbow
Female Swivel 90E Elbow
3/16
M10x1
DKM-45-03-10
DKM-90-03-10
1/4
M12X1.5
DKM-45-04-12
DKM-90-04-12
1/4
M14X1.5
DKM-45-04-14
DKM-90-04-14
5/16
M16X1.5
DKM-45-05-16
DKM-90-05-16
5/16
M18X1.5
DKM-45-05-18
DKM-90-05-18
3/8
M16X1.5
DKM-45-06-16
DKM-90-06-16
3/8
M18X1.5
DKM-45-06-18
DKM-90-06-18
3/8
M22X1.5
DKM-45-06-22
DKM-90-06-22
1/2
M18X1.5
DKM-45-08-18
DKM-90-08-18
1/2
M20X1.5
DKM-45-08-20
DKM-90-08-20
1/2
M22X1.5
DKM-45-08-22
DKM-90-08-22
5/8
M26X1.5
DKM-45-10-26
DKM-90-10-26
3/4
M26X1.5
DKM-45-12-26
DKM-90-12-26
3/4
M30X1.5
DKM-45-12-30
DKM-90-12-30
1"
M38X1.5
DKM-45-16-38
DKM-90-16-38
1-1/4
M45X1.5
DKM-45-20-45
DKM-90-20-45
1-1/2
M52X1.5
DKM-45-24-52
DKM-90-24-52
2"
M65X2
DKM-45-32-65
DKM-90-32-65
Notes:
1.
AGM- hose ends m ay be used as a port fitting (using an appropriate seal) or m ay connect to a fem ale swivel
fitting with a 60E cone seat.
2.
The fem ale swivel fittings (DKM-, DKM-45-, and DKM-90-) m ay also be used to connect to DIN 2353-L tube
fittings with the corresponding thread size. This only applies up to thread size M26x1.5 (18-L tube size).
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 10 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Miscellaneous Metric Hose Fittings
Banjo Hose Fitting
JIS Female Swivel - 30E Flare Seat
Hose Size
Banjo Bolt Size
Part Number
Hose Size
Thread Size
Part Number
3/16
1/8-28 BSPP
RNR-03-02
1/4
1/4-19
DKR-J-04-04
1/4
1/8-28 BSPP
RNR-04-02
3/8
3/8-19
DKR-J-06-06
1/2-14
DKR-J-08-08
3/4-14
DKR-J-12-12
1/4
1/4-19 BSPP
RNR-04-04
1/2
1/4
3/8-19 BSPP
RNR-04-06
3/4
3/8
3/8-19 BSPP
RNR-06-06
1"
1-11
DKR-J-16-16
3/8
1/2-14 BSPP
RNR-06-08
1-1/4
1 1/4-11
DKR-J-20-20
1/2
1/2-14 BSPP
RNR-08-08
1/4
M14X1.5
DKM-J-04-14
M16X1.5
DKM-J-04-16
3/4
3/4-14 BSPP
RNR-12-12
1/4
1"
1-11 BSPP
RNR-16-16
3/8
M18X1.5
DKM-J-06-18
3/16
10mm
RNR-03-10
1/2
M22X1.5
DKM-J-08-22
1/4
10mm
RNR-04-10
3/4
M26X1.5
DKM-J-12-26
1/4
12mm
RNM-04-12
1"
M30X1.5
DKM-J-16-30
1-1/4
M38X1.5
DKM-J-20-38
1/4
14mm
RNM-04-14
3/8
16mm
RNM-06-16
3/8
18mm
RNM-06-18
1/2
18mm
RNM-08-18
1/2
22mm
RNM-08-22
5/8
18mm
RNM-10-18
5/8
22mm
RNM-10-22
5/8
26mm
RNM-10-26
3/4
26mm
RNM-12-26
3/4
30mm
RNM-12-30
1"
33mm
RNM-16-33
Pressure Washer
Hose Size
Thread Size
Part Number
Notes:
Additional m etric sizes can be obtained by using the
following BSPP sizes:
1/4
M22 x 1.5
DKK-04-22
5/16
M22 x 1.5
DKK-05-22
3/8
M22 x 1.5
DKK-06-22
For 27m m use RNR-12-12
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 11 of 39
Hose Fitting Accessories
Hollow Bolt for Banjo Hose Fittings
Banjo Bolt Size
Copper Washer for Banjo Hose Fittings
Part Number
Thread Size
Part Number
1/8 BSPP
F15 R1/8
1/8 BSPP
CWR 1/8
1/4 BSPP
F15 R1/4
1/4 BSPP
CWR 1/4
3/8 BSPP
F15 R3/8
3/8 BSPP
CWR 3/8
1/2 BSPP
F15 R1/2
1/2 BSPP
CWR 1/2
5/8 BSPP
F15 R5/8
5/8 BSPP
CWR 5/8
3/4 BSPP
F15 R3/4
3/4 BSPP
CWR 3/4
1" BSPP
F15 R1
1" BSPP
CWR 01
1-1/4 BSPP
F15 R11/4
1-1/4 BSPP
CWR 11/4
1-1/2 BSPP
F15 R11/2
1-1/2 BSPP
CWR 11/2
M10 x 1
F15 M10x1
M10 x 1
CWM 10
M12 x 1.5
F15 M12x1.5
M12 x 1.5
CWM 12
M14 x 1.5
F15 M14x1.5
M14 x 1.5
CWM 14
M16 x 1.5
F15 M16x1.5
M16 x 1.5
CWM 16
M18 x 1.5
F15 M8x1.5
M18 x 1.5
CWM 18
M20 x 1.5
F15 M20x1.5
M20 x 1.5
CWM 20
M22 x 1.5
F15 M22x1.5
M22 x 1.5
CWM 22
M26 x 1.5
F15 M26x1.5
M26 x 1.5
CWM 26
M27 x 2
F15 M27x2
M27 x 2
CWM 27
M30 x 2
F15 M30x2
M30 x 2
CWM 30
M33 x 2
F15 M33x2
M33 x 2
CWM 33
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 12 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Re-Useable Hose Ends Steel
RAGR - BSPP Male
RAGRK - BSPT Male
RAGJ - JIC Male
RAGN - NPT Male
RCEL - DIN2353L Male
RCES - DIN2353S Male
RDKOL - DIN2353L Female
RDKOS - DIN2353S Female
RDKOL45 - DIN2353L Female 45E Elbow
RDKOS45 - DIN2353S Female 45E Elbow
RDKOL90 - DIN2353L Female 90E Elbow
RDKOS90 - DIN2353S Female 90E Elbow
RBEM - Metric Standpipe
RBEM45 - Metric Standpipe 45E Elbow
RBEM90 - Metric Standpipe 90E Elbow
RDKR - BSPP Female
RDKR45 - BSPP Female 45E Elbow
RDKR90 - BSPP Female 90E Elbow
RDKJ - JIC Female
RDKJ45 - JIC Female 45E Elbow
RDKJ90 - JIC Female 90E Elbow
RHF - Hose Ferrule Re-useable
Please enquire about available sizes and hose applications for the re-useable hose fittings.
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 13 of 39
Low Pressure and General Purpose Hose
O I L,
GASOLINE
AND
PNEUMATIC
USE
Oil and Gasoline Hose Type PZ
(DIN 73379)
Synthetic rubber inner tube.
Steel wire braided cover.
Coloured marking thread.
Temperature range -35EC to +80EC.
Part Number
Inner diameter
Outer Diameter
Burst Pressure
PZ 4/5
4.5 mm
9.5 mm
60 bar
PZ 5/6
5.5 mm
10.5 mm
60 bar
PZ 8
7.5 mm
12.5 mm
50 bar
PZ 10
9.0 mm
14.0 mm
50 bar
PZ 12
11.5 mm
18.0 mm
50 bar
PZ 15
14.5 mm
22.0 mm
50 bar
PZ 18
17.0 mm
25.0 mm
50 bar
PZ 20
19.0 mm
29.0 mm
50 bar
Oil and Gasoline Hose Type PZVA (DIN 73379)
Synthetic rubber inner tube.
Stainless steel wire braided cover.
Temperature range -35EC to +80EC
Part Number
Inner diameter
Outer Diameter
Burst Pressure
PZ 5/6 VA
5.5 mm
10.5 mm
60 bar
PZ 8 VA
7.5 mm
12.5 mm
50 bar
PZ 10 VA
9.0 mm
15.0 mm
50 bar
PZ 12 VA
11.5 mm
18.0 mm
50 bar
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 14 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Fittings for Low Pressure Hoses
Crimp Sleeves Type H
Steel with zinc plating.
Part Number
Inside Diameter (mm)
End Bore (mm)
Length (mm)
H 4/9
9.0
5.5
17.0
H 5/10
10.0
6.5
17.0
H 5/11
11.0
6.5
17.0
H 6/11
11.0
7.5
17.0
H 6/12/12
12.0
12.0
19.0
H 6/12
12.0
7.5
20.0
H 6/13.5
13.5
7.5
20.0
H 6/15
15.0
7.5
20.0
H 8/13.5
13.5
10.0
20.0
H 8/14
14.0
10.0
20.0
H 8/15
15.0
10.0
20.0
H 10/15
15.0
11.7
20.0
H 10/16
16.0
11.7
20.0
H 10/17
17.0
11.7
21.0
H 12/18
18.0
13.8
21.0
H 12/19
19.0
13.8
26.0
H 12/20
20.0
13.8
26.0
H 12/22
22.0
15.6
32.0
H 15/23
23.0
17.0
32.0
H 15/24.5
24.5
17.0
33.0
H 15/26.5
26.5
19.5
33.0
H 18/28
28.0
20.5
34.0
H 20/30
30.0
24.0
32.0
H 20/32
32.0
24.0
34.0
H 20/33
33.0
24.0
34.0
H 20/34
34.0
24.0
34.0
H 25/36
36.0
25.0
35.0
H 25/38
38.0
27.0
35.0
H 25/40
40.0
28.0
40.0
Choose crim p shells based on hose O.D. and end bore required.
These shells are to be crim ped on using a universal style crim per with 6 or 8 die fingers.
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 15 of 39
Fittings for Low Pressure Hoses
Nut Type UM
Hose Nipple Type S
For Female Swivel
Similar to DIN 3870
With Metric &
BSP Thread.
Similar to DIN 7608
Cone Seal
Part
Number
Hose
I.D.
(mm)
Nut Required
S5
S6
S 6/8
S 6/10
S8
S 8/10
S 10
S 10/12
S 12
S 12/15
S 15/22
S 15/26
S 18/26
S 12 1/2
S 15 1/2
S20 3/4
S 20 1
5
6
6
6
8
8
10
10
12
12
15
15
18
12
15
20
20
UM 5/10, UM 5 1/8
UM 6/12, UM 6 1/4
UM 8/14
UM 10/16
UM 8/14, UM 8 1/4
UM 10/16
UM 10/16, UM 10 3/8
UM 12/18
UM 12/18
UM 15/22
UM 15/22
UM 18/26
UM 18/26
UM 1/2
UM 1/2
UM 3/4
UM 1
Part
Number
Nominal
Bore
Thread Size
UM 5/10
3
M10 x 1
UM 6/12
4
M12 x 1.5
UM 8/14
6
M14 x 1.5
UM 10/16
8
M16 x 1.5
UM 12/18
10
M18 x 1.5
UM 15/22
12
M22 x 1.5
UM 18/26
16
M26 x 1.5
UM 5 1/8
3
1/8 BSP
UM 6 1/4
4
1/4 BSP
UM 8 1/4
6
1/4 BSP
UM 10
8
3/8 BSP
UM 1/2
10
1/2 BSP
Banjo
Hose Nipple
Type RS
Similar to
DIN 7642
Hose Nipple Type S-F
For Female Swivel
Flat Seat
Part
Number
Hose I.D.
(mm)
Nut Required
S5F
5
UM 5/10, UM 5 1/8
S6F
6
UM 6/12, UM 6 1/4
S8 F
8
UM 8/14, UM 8 1/4
S 10 F
10
UM 10/16, UM 10 3/8
S 12 F
12
UM 12/18
S 15/22 F
15
UM 15/22
S 15/26 F
15
UM 18/26
S 18/26 F
18
UM 18/26
S 12 1/2 F
12
UM 1/2
S 15 1/2 F
15
UM 1/2
S20 3/4 F
20
UM 3/4
S 20 1F
20
UM 1
Part
Number
Hose I.D.
(mm)
Banjo Bolt Size
RS 5/6
RS 5/8
RS 6/10
RS 6/12
RS 6/14
RS 8/10
RS 8/12
RS 8/14
RS 10/12
RS 10/14
RS 10/16
RS 10/18
RS 12/16
RS 12/18
RS 15/18
RS 15/22
RS 15/26
RS 18/22
RS 18/26
4/5
5/6
5/6
5/6
5/6
8
8
8
10
10
10
10
12
12
15
15
15
18
18
6 mm
8 mm
10 mm, R1/8
12 mm
14 mm, R1/4
10 mm, R1/8
12 mm
14 mm, R1/4
12 mm
14 mm, R1/4
16 mm
18 mm
16 mm
18 mm
18 mm
22 mm
26 mm
22 mm
26 mm
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 16 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Fittings for Low Pressure Hoses
Banjo Double
Hose Nipple
Standpipe Hose
Nipple 45E
Type DRS
Type RBS/45
Part Number
Hose I.D.
(mm)
Banjo Bolt Size
Part Number
Hose I.D.
(mm)
Standpipe
Size
DRS 5/8
DRS 6/10
DRS 8/12
DRS 10/14
5/6
5/6
8
10
8 mm
10 mm, R1/8
12 mm
14 mm, R1/4
RBS 6/45
RBS 8/45
RBS 10/45
RBS 12/45
RBS 15/45
5/6
8
10
12
15
6 mm
8 mm
10 mm
12 mm
15 mm
Standpipe
Hose Nipple
Male Thread Hose Nipple
Type RST
Part Number
Hose I.D.
(mm)
Standpipe
Size
RST 4
RST 5
RST 6
RST 8
RST 10
RST 12
RST 15
RST 18
4/5
5/6
5/6
8
10
12
15
18
4 mm
5 mm
6 mm
8 mm
10 mm
12 mm
15 mm
18 mm
Type SA
Male Thread 60ECone
Seat (KO) or
Flat Seat (F)
Standpipe Hose
Nipple 90E
Type RBS/90
Part Number
Hose I.D.
(mm)
Standpipe
Size
RBS 4/90
RBS 5/90
RBS 6/90
RBS 8/90
RBS 10/90
RBS 12/90
RBS 15/90
4/5
5/6
5/6
8
10
12
15
4 mm
5 mm
6 mm
8 mm
10 mm
12 mm
15 mm
Part Number
Hose I.D.
(mm)
Thread
Size
SA 5/10 KO
SA 6/12 KO
SA 8/14 KO
SA 10/16 KO
SA 12/18 KO
SA 15/22 KO
SA 15/26 KO
SA 18/26 KO
SA 15/22 F
SA 15/26 F
SA 18/26 F
5/6
5/6
8
10
12
15
15
18
15
15
18
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 26x1.5
M 22x1.5
M 26x1.5
M 26x1.5
Male Thread Hose Nipple
Type SA
24E Cone Seat for
Cutting Ring
Part Number
Hose I.D.
(mm)
Thread
Size
Tube
Size
SA 5/10 S
SA 6/12 S
SA 8/14 S
SA 10/16 S
SA 12/18 S
SA 15/22 S
SA 15/22/16 S
SA 15/26 S
SA 18/26 S
5/6
5/6
8
10
12
15
15
15
18
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 22x1.5
M 26x1.5
M 26x1.5
5 LL
6L
8L
10 L
12 L
15 L
16 LL
18 L
18 L
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 17 of 39
Fittings for Low Pressure Hoses
Brass Compression
Sleeves
For Metric Plastic Tubing
Part Number
Tube
Size
DKN 4
DKN 5
DKN 6
DKN 8
DKN 10
DKN 12
4 mm
5 mm
6 mm
8 mm
10 mm
12 mm
Grease Nipple Type SM A
Metric and BSP Thread
Part Number
Thread Size
SM 6A
SM 8A
SM 10A
SM 14A
SM 18A
M 6x1
M 8x1
M 10x1
1/4 BSP
1/8 BSP
Grease Nipple Type SM B
Metric and BSP Thread
Brass Reinforcing Sleeves
For Metric Plastic Tubing
Part Number
Tube O.D.
(mm)
Part Number
Thread Size
SM 6B
SM 8B
SM 10B
SM 14B
SM 18B
M 6x1
M 8x1
M 10x1
1/4 BSP
1/8 BSP
Tube I.D.
(mm)
VHP 4/1.0
4
2
VHP 5/1.0
5
3
VHP 6/1.0
6
4
VHP 8/1.0
8
6
VHP 8/1.5
8
5
VHP 9/1.5
9
6
VHP 10/1.0
10
8
VHP 10/1.25
10
7.5
VHP 10/1.5
10
7
VHP 11/1.5
11
8
VHP 12/1.5
12
9
VHP 12/2.0
12
8
VHP 14/2.0
14
10
VHP 15/1.5
15
12
VHP 16/2.0
16
12
VHP 18/2.0
18
14
VHP 22/2.0
22
18
Grease Nipple Type SM C
Metric and BSP Thread
Part Number
Thread
Size
SM 6C
SM 8C
SM 10C
SM 14C
SM 18C
M 6x1
M 8x1
M 10x1
1/4 BSP
1/8 BSP
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 18 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Stainless Steel Crimp Ferrules
Skive
Skive
Hose Type: R1A
Hose Type: R2A & R12
Hose
Model Number
Part Number
Model Number
Part Number
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1"
1-1/4
1-1/2
2"
PF-1-03SS
PF-1-04SS
PF-1-05SS
PF-1-06SS
PF-1-08SS
PF-1-10SS
PF-1-12SS
PF-1-16SS
PF-1-20SS
PF-1-24SS
PF-1-32SS
82003-0300
82003-0400
82003-0500
82003-0600
82003-0800
82003-1000
82003-1200
82003-1600
82003-2000
82003-2400
82003-3200
PF-2-03SS
PF-2-04SS
PF-2-05SS
PF-2-06SS
PF-2-08SS
PF-2-10SS
PF-2-12SS
PF-2-16SS
PF-2-20SS
PF-2-24SS
PF-2-32SS
82006-0300 R2A
ZPF12240-0400
ZPF12240-0500
ZPF12240-0600
ZPF12240-0800
ZPF12240-1000
ZPF12240-1200
ZPF12240-1600
ZPF12240-2000
ZPF12240-2400
ZPF12240-3200
No Skive
Hose Type: R1T & R2AT
Hose Type: R7 & R8
Hose
Model Number
Part Number
Model Number
Part Number
3/16
PF-1T-03SS
PF-2T-03SS
81020-0300 R1AT
81030-0300 R2AT
PF-7-03SS
81012-0300
1/4
5/16
3/8
1/2
5/8
3/4
1"
1-1/4
1-1/2
2"
PF-1T/2T-04SS
PF-1T/2T-05SS
PF-1T/2T-06SS
PF-1T/2T-08SS
PF-1T/2T-10SS
PF-1T/2T-12SS
PF-1T/2T-16SS
PF-1T/2T-20SS
PF-1T/2T-24SS
PF-1T/2T-32SS
ZPF22120-0400
ZPF22120-0500
ZPF22120-0600
ZPF22120-0800
ZPF22120-1000
ZPF22120-1200
ZPF22120-1600
ZPF22120-2000
ZPF22120-2400
ZPF22120-3200
PF-7-04SS
PF-7-05SS
PF-7-06SS
PF-7-08SS
PF-7-10SS
PF-7-12SS
PF-7-16SS
81012-0400
81012-0500
81012-0600
81012-0800
81012-1000
81012-1200
81012-1600
All ferrules m ust be crim ped full length, preferably with an 8-finger crim per. Crim p specifications available.
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 19 of 39
Stainless Steel Crimp Ferrules
Stainless Steel Braided Smooth
Bore Teflon Hose
Actual Hose ID
Stainless Steel Braided
Convoluted Teflon Hose
Hose
Model Number
Part Number
Hose
Model Number
Part Number
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1"
1-1/8
PTTB-03SS
PTTB-04SS
PTTB-05SS
PTTB-06SS
PTTB-08SS
PTTB-10SS
PTTB-12SS
PTTB-14SS
PTTB-16SS
PTTB-18SS
81040-0300
81040-0400
81040-0500
81040-0600
81040-0800
81040-1000
81040-1200
81040-1400
81040-1600
81040-1800
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1"
1-1/4
1-1/2
2"
2-1/2
PTTC-03SS
PTTC-04SS
PTTC-05SS
PTTC-06SS
PTTC-08SS
PTTC-10SS
PTTC-12SS
PTTC-16SS
PTTC-20SS
PTTC-24SS
PTTC-32SS
PTTC-40SS
81041-0300
81041-0400
81041-0500
81041-0600
81041-0800
81041-1000
81041-1200
81041-1600
81041-2000
81041-2400
81041-3200
81041-4000
All ferrules m ust be crim ped full length, preferably with an 8-finger crim per.
Crim p specifications available.
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 20 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Stainless Steel BSP Hose Fittings
BSPP Male Flat Seat
BSPP Male 60E Cone
Hose
Size
BSP
Size
Thread
Size
1/8
1/8
3/16
3/16
Model
Number
Part
Number
Model
Number
Part
Number
1/8 – 28
AGR-02-02-SS
84112-0202
1/8
1/8 – 28
AGR-03-02-SS
84112-0203
1/4
1/4 – 19
AGR-03-04-SS
84112-0403
1/4
1/8
1/8 – 28
AGR-04-02-SS
84112-0204
1/4
1/4
1/4 – 19
AGR-04-04-SS
84112-0404
1/4
3/8
3/8 – 19
AGR-04-06-SS
84112-0604
AGR-F-04-04-SS
84212-0404
1/2
1/2
1/2 – 14
AGR-04-08-SS
84112-0804
5/16
1/4
1/4 – 19
5/16
3/8
3/8 – 19
AGR-05-06-SS
84112-0605
3/8
1/4
1/4 – 19
AGR-06-04-SS
84112-0406
AGR-F-05-06-SS
84212-0605
3/8
3/8
3/8 – 19
AGR-06-06-SS
84112-0606
AGR-F-06-06-SS
84212-0606
3/8
1/2
1/2 – 14
1/2
1/4
1/4 – 19
AGR-06-08-SS
84112-0806
AGR-F-06-08-SS
84212-0806
AGR-08-04-SS
84112-0408
1/2
3/8
1/2
1/2
3/8 – 19
AGR-08-06 SS
84112-0608
1/2 – 14
AGR-08-08-SS
84112-0808
AGR-F-08-08-SS
84212-0808
1/2
1/2
5/8
5/8 – 14
AGR-08-10-SS
84112-1008
3/4
3/4 – 14
AGR-08-12-SS
84112-1208
5/8
5/8
5/8 – 14
AGR-10-10-SS
84112-1010
AGR-F-10-10-SS
84212-1010
5/8
3/4
3/4 – 14
AGR-10-12-SS
84112-1210
3/4
3/4
3/4 – 14
AGR-12-12-SS
84112-1212
AGR-F-12-12-SS
84212-1212
3/4
1
1 – 11
AGR-12-16-SS
84112-1612
AGR-F-12-16-SS
84212-1612
1
1
1 – 11
AGR-16-16-SS
84112-1616
AGR-F-16-16-SS
84212-1616
1
1-1/4
11/4 – 11
AGR-16-20-SS
84112-2016
AGR-F-16-20-SS
84212-2016
1-1/4
1-1/4
11/4 – 11
AGR-20-20-SS
84112-2020
AGR-F-20-20-SS
84212-2020
AGR-20-24-SS
84112-2420
1-1/2
1-1/2
1
1 /2 – 11
1
1-1/2
1-1/2
1 /2 – 11
AGR-24-24-SS
84112-2424
AGR-F-24-24-SS
84212-2424
2
2
2 – 11
AGR-32-32-SS
84112-3232
AGR-F-32-32-SS
84212-3232
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 21 of 39
Stainless Steel NPT & BSPT Hose Fittings
NPT Male
H ose
S ize
N om inal
Thread
NPT Thread
BSPT Male Tapered
Model
Number
Part
Number
BSPT
Thread
Model
Number
Part
Number
1/8 - 28
AGR-K-03-02-SS
84114-0203
3/16
1/8
1/8 - 27
AGN-03-02-SS
84161-0203
3/16
1/4
1/4 - 18
AGN-03-04-SS
84161-0403
1/4
1/8
1/8 - 27
AGN-04-02-SS
84161-0204
1/8 - 27
AGR-K-04-02SS
84114-0204
1/4
1/4
1/4 - 18
AGN-04-04-SS
84161-0404
1/4 - 18
AGR-K-04-04-SS
84114-0404
1/4
3/8
3/8 - 18
AGN-04-06-SS
84161-0604
3/8 - 18
AGR-K-04-06-SS
84114-0604
5/16
1/4
1/4 - 18
AGN-05-04-SS
84161-0405
1/4 - 18
AGR-K-05-04SS
84114-0405
5/16
3/8
3/8 - 18
AGN-05-06-SS
84161-0605
3/8 - 18
AGR-K-05-06-SS
3/8
1/4
1/4 - 18
AGN-06-04-SS
84161-0406
1/4 - 18
AGR-K-06-04-SS
84114-0406
3/8
3/8
3/8 - 18
AGN-06-06-SS
84161-0606
3/8 - 18
AGR-K-06-06-SS
84114-0606
3/8
1/2
1/2 - 14
AGN-06-08-SS
84161-0806
1/2 - 14
AGR-K-06-08-SS
84114-0806
1/2
3/8
3/8 - 18
AGN-08-06-SS
84161-0608
1/2
1/2
1/2 - 14
AGN-08-08-SS
84161-0808
1/2 - 14
AGR-K-08-08-SS
84114-0808
1/2
5/8
5/8 - 14
AGR-K-08-10-SS
84114-1008
1/2
3/4
3/4 - 14
AGN-08-12-SS
84161-1208
3/4 - 14
AGR-K-08-12-SS
84114-1208
5/8
1/2
1/2 - 14
AGN-10-08-SS
84161-0810
5/8
5/8
5/8 - 14
AGN-10-10-SS
84161-1010
5/8 - 14
AGR-K-10-10-SS
84114-1010
5/8
3/4
3/4 - 14
AGN-10-12-SS
84161-1210
3/4 - 14
AGR-K-10-12-SS
84114-1210
3/4
3/4
3/4 - 14
AGN-12-12-SS
84161-1212
3/4 - 14
AGR-K-12-12-SS
84114-1212
3/4
1"
1 - 11.5
AGN-12-16-SS
84161-1612
1 - 11
AGR-K-12-16-SS
84114-1612
1"
1"
1 - 11.5
AGN-16-16-SS
84161-1616
1 - 11
AGR-K-16-16-SS
84114-1616
1
1
1"
1-1/4
1 /4 - 11.5
AGN-16-20-SS
84161-2016
1 /4 - 11
AGR-K-16-20-SS
84114-2016
1-1/4
1-1/4
11/4 - 11.5
AGN-20-20-SS
84161-2020
11/4 - 11
AGR-K-20-20-SS
84114-2020
AGR-K-20-24-SS
84114-2420
1-1/4
1-1/2
1
1 /2 - 11.5
1
AGN-20-24-SS
84161-2420
1
1 /2 - 11
1
1-1/2
1-1/2
1 /2 - 11.5
AGN-24-24-SS
84161-2424
1 /2 - 11
AGR-K-24-24-SS
84114-2424
2"
2"
2 - 11.5
AGN-32-32-SS
84161-3232
2 - 11
AGR-K-32-32-SS
84114-3232
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 22 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Stainless Steel BSP Hose Fittings
BSPP Swivel Female
Hose
Size
BSP
Size
Thread
Size
Model
Number
Part
Number
3/16
1/8
1/8 – 28
DKR-03-02-SS
84100-0203
3/16
1/4
1/4 – 19
DKR-03-04-SS
84100-0403
1/4
1/8
1/8 – 28
DKR-04-02-SS
84100-0204
1/4
1/4
1/4 – 19
DKR-04-04-SS
1/4
3/8
3/8 – 19
DKR-04-06-SS
1/4
1/2
1/2 – 14
5/16
1/4
1/4 – 19
DKR-05-04-SS
84100-0405
5/16
3/8
3/8 – 19
DKR-05-06-SS
3/8
3/8
3/8 – 19
3/8
1/2
1/2 – 14
1/2
3/8
3/8 – 19
1/2
1/2
1/2 – 14
DKR-08-08-SS
84100-0808
1/2
5/8
5/8 – 14
DKR-08-10-SS
84100-1008
1/2
3/4
3/4 – 14
DKR-08-12-SS
84100-1208
5/8
1/2
1/2 – 14
DKR-10-08-SS
84100-0810
5/8
5/8
5/8 – 14
DKR-10-10-SS
84100-1010
5/8
3/4
3/4 – 14
DKR-10-12-SS
3/4
3/4
3/4 – 14
DKR-12-12-SS
3/4
1"
1 – 11
DKR-12-16-SS
84100-1612
Model
Number
Part
Number
84100-0404
DKR-F-04-04-SS
84200-0404
84100-0604
DKR-F-04-06-SS
84200-0604
DKR-F-04-08-SS
84200-0804
84100-0605
DKR-F-05-06-SS
84200-0605
DKR-06-06-SS
84100-0606
DKR-F-06-06-SS
84200-0606
DKR-06-08-SS
84100-0806
DKR-F-06-08-SS
84200-0806
DKR-F-08-06-SS
84200-0608
DKR-F-08-08-SS
84200-0808
DKR-F-08-12-SS
84200-1208
84100-1210
DKR-F-10-12-SS
84200-1210
84100-1212
DKR-F-12-12-SS
84200-1212
DKR-F-16-16-SS
84200-1616
DKR-F-20-20-SS
84200-2020
DKR-F-24-24-SS
84200-2424
DKR-F-32-32-SS
84200-3232
1"
1"
1 – 11
DKR-16-16-SS
84100-1616
1"
1-1/4
11/4 – 11
DKR-16-20-SS
84100-2016
1-1/4
1-1/4
11/4 – 11
DKR-20-20-SS
84100-2020
1
BSPP Swivel Female Flat Seat
1-1/4
1-1/2
1 /2 – 11
DKR-20-24-SS
84100-2420
1-1/2
1-1/2
11/2 – 11
DKR-24-24-SS
84100-2424
1-1/2
2"
2 – 11
DKR-24-32-SS
84100-3224
2"
2"
2 – 11
DKR-32-32-SS
84100-3232
The flat seat BSPP fittings are m ost often seen on HIAB cranes.
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 23 of 39
Stainless Steel BSP Hose Fittings
BSPP Swivel Female 45E Elbow
BSPP Swivel Female 90E Elbow
Hose
Size
BSP
Size
Thread
Size
Model
Number
Part
Number
Model
Number
Part
Number
3/16
1/4
1/4 – 19
DKR-45-03-04-SS
84108-0403
DKR-90-03-04-SS
84107-0403
1/4
1/4
1/4 – 19
DKR-45-04-04-SS
84108-0404
DKR-90-04-04-SS
84107-0404
1/4
3/8
3/8 – 19
DKR-45-04-06-SS
84108-0604
DKR-90-04-06-SS
84107-0604
1/4
1/2
1/4 – 14
5/16
3/8
3/8 – 19
DKR-45-05-06-SS
3/8
3/8
3/8 – 19
3/8
1/2
1/2
1/2
1/2
3/4
3/4 – 14
5/8
5/8
5/8 – 14
DKR-45-10-10-SS
5/8
3/4
3/4 – 14
3/4
3/4
3/4
1"
1"
1-1/4
DKR-90-04-08-SS
84107-0804
84108-0605
DKR-90-05-06-SS
84107-0605
DKR-45-06-06-SS
84108-0606
DKR-90-06-06-SS
84107-0606
1/2 – 14
DKR-45-06-08-SS
84108-0806
DKR-90-06-08-SS
84107-0806
1/2 – 14
DKR-45-08-08-SS
84108-0808
DKR-90-08-08-SS
84107-0808
DKR-90-08-12-SS
84107-1208
84108-1010
DKR-90-10-10-SS
84107-1010
DKR-45-10-12-SS
84108-1210
DKR-90-10-12-SS
84107-1210
3/4 – 14
DKR-45-12-12-SS
84108-1212
DKR-90-12-12-SS
84107-1212
1 – 11
DKR-45-12-16-SS
84108-1612
DKR-90-12-16-SS
84107-1612
1"
1 – 11
DKR-45-16-16-SS
84108-1616
DKR-90-16-16-SS
84107-1616
1-1/4
11/4 – 11
DKR-45-20-20-SS
84108-2020
DKR-90-20-20-SS
84107-2020
1
1-1/2
1-1/2
1 /2 – 11
DKR-45-24-24-SS
84108-2424
DKR-90-24-24-SS
84107-2424
2"
2"
2 – 11
DKR-45-32-32-SS
84108-3232
DKR-90-32-32-SS
84107-3232
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 24 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Stainless Steel Metric Standpipe Hose Fittings
Metric Standpipe Straight
Metric Standpipe
45E Elbow
Metric Standpipe
90E Elbow
Hose
Size
Standpipe
Size
Model
Number
Part
Number
Model
Number
Part
Number
Model
Number
Part
Number
3/16
6mm
BEM-03-06-SS
84158-0603
BEM-45-03-06-SS
84358-0603
BEM-90-03-06-SS
84258-0603
3/16
8mm
BEM-03-08-SS
84158-0803
BEM-90-03-08-SS
84258-0803
1/4
6mm
BEM-04-06-SS
84158-0604
BEM-45-04-06-SS
84358-0604
BEM-90-04-06-SS
84258-0604
1/4
8mm
BEM-04-08-SS
84158-0804
BEM-45-04-08-SS
84358-0804
BEM-90-04-08-SS
84258-0804
1/4
10mm
BEM-04-10-SS
84158-1004
BEM-45-04-10-SS
84358-1004
BEM-90-04-10-SS
84258-1004
BEM-04-12-SS
84158-1204
BEM-90-04-12-SS
84258-1204
BEM-90-05-08-SS
84258-0805
1/4
12mm
5/16
8mm
5/16
10mm
BEM-05-10-SS
84158-1005
BEM-45-05-10-SS
84358-1005
BEM-90-05-10-SS
84258-1005
5/16
12mm
BEM-05-12-SS
84158-1205
BEM-45-05-12-SS
84358-1205
BEM-90-05-12-SS
84258-1205
3/8
8mm
BEM-06-08-SS
84158-0806
3/8
10mm
BEM-06-10-SS
84158-1006
BEM-45-06-10-SS
84358-1006
BEM-90-06-10-SS
84258-1006
3/8
12mm
BEM-06-12-SS
84158-1206
BEM-45-06-12-SS
84358-1206
BEM-90-06-12-SS
84258-1206
3/8
14mm
BEM-06-14-SS
84158-1406
BEM-45-06-14-SS
84358-1406
BEM-90-06-14-SS
84258-1406
3/8
15mm
BEM-06-15-SS
84158-1506
BEM-90-06-15-SS
84258-1506
1/2
12mm
BEM-08-12-SS
84158-1208
1/2
14mm
BEM-08-14-SS
84158-1408
BEM-45-08-14-SS
84358-1408
BEM-90-08-14-SS
84258-1408
1/2
15mm
BEM-08-15-SS
84158-1508
BEM-45-08-15-SS
84358-1508
BEM-90-08-15-SS
84258-1508
1/2
16mm
BEM-08-16-SS
84158-1608
BEM-45-08-16-SS
84358-1608
BEM-90-08-16-SS
84258-1608
1/2
18mm
BEM-08-18-SS
84158-1808
BEM-90-08-18-SS
84258-1808
5/8
18mm
BEM-10-18-SS
84158-1810
BEM-45-10-18-SS
84358-1810
BEM-90-10-18-SS
84258-1810
5/8
20mm
BEM-10-20-SS
84158-2010
BEM-45-10-20-SS
84358-2010
BEM-90-10-20-SS
84258-2010
5/8
22mm
BEM-10-22-SS
84158-2210
3/4
18mm
BEM-12-18-SS
84158-1812
3/4
20mm
BEM-12-20-SS
84158-2012
BEM-45-12-20-SS
84358-2012
BEM-90-12-20-SS
84258-2012
3/4
22mm
BEM-12-22-SS
84158-2212
BEM-45-12-22-SS
84358-2212
BEM-90-12-22-SS
84258-2212
3/4
25mm
BEM-12-25-SS
84158-2512
BEM-45-12-25-SS
84358-2512
BEM-90-12-25-SS
84258-2512
1"
25mm
BEM-16-25-SS
84158-2516
1"
28mm
BEM-16-28-SS
84158-2816
BEM-90-16-28-SS
84258-2816
1"
30mm
BEM-16-30-SS
84158-3016
BEM-90-16-30-SS
84258-3016
1-1/4
35mm
BEM-20-35-SS
84158-3520
BEM-90-20-35-SS
84258-3520
1-1/4
38mm
BEM-20-38-SS
84158-3820
BEM-90-20-38-SS
84258-3820
1-1/2
42mm
BEM-24-42-SS
84158-4224
BEM-90-24-42-SS
84258-4224
Standpipes are m ost often used to connect hose to DIN 2353 tube fittings.
This is a convenient way to com bine hose and tubing in an installation.
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 25 of 39
Stainless Steel Hose Fittings for DIN 2353 Tube Fittings (L Series, 24E Cone)
Metric Male 24E
H ose
S ize
Tube
S ize
Thread
S ize
3/16
6-L
M12x1.5
1/4
6-L
1/4
Model Number
Part Number
M12x1.5
CEL-04-12-SS
84203-120604
8-L
M14x1.5
CEL-04-14-SS
1/4
10-L
M16x1.5
1/4
12-L
M18x1.5
5/16
10-L
5/16
12-L
3/8
Female Swivel 24E with O-Ring
Model Number
Part Number
DKOL-03-12-SS
84804-120603
DKOL-04-12-SS
84804-120604
84203-140804
DKOL-04-14-SS
84804-140804
CEL-04-16-SS
84203-161004
DKOL-04-16-SS
84804-161004
CEL-04-18-SS
84203-181204
DKOL-04-18-SS
84804-181204
M16x1.5
CEL-05-16-SS
84203-161005
DKOL-05-16-SS
84804-161005
M18x1.5
CEL-05-18-SS
84203-181205
DKOL-05-18-SS
84804-181205
10-L
M16x1.5
CEL-06-16-SS
84203-161006
DKOL-06-16-SS
84804-161006
3/8
12-L
M18x1.5
CEL-06-18-SS
84203-181206
DKOL-06-18-SS
84804-181206
3/8
15-L
M22x1.5
DKOL-06-22-SS
84804-221506
1/2
15-L
M22x1.5
CEL-08-22-SS
84203-221508
DKOL-08-22-SS
84804-221508
1/2
18-L
M26x1.5
CEL-08-26-SS
84203-261808
DKOL-08-26-SS
84804-261808
5/8
18-L
M26x1.5
CEL-10-26-SS
84203-261810
DKOL-10-26-SS
84804-261810
3/4
22-L
M30x2
CEL-12-30-SS
84203-302212
DKOL-12-30-SS
84804-302212
1"
28-L
M36x2
CEL-16-36-SS
84203-362816
DKOL-16-36-SS
84804-362816
1-1/4
35-L
M45x2
CEL-20-45-SS
84203-453520
DKOL-20-45-SS
84804-453520
1-1/2
42-L
M52x2
CEL-24-52-SS
84203-524224
DKOL-24-52-SS
84804-524224
2"
42-L
M52x2
DKOL-32-52-SS
84804-524232
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 26 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Stainless Steel Hose Fittings for DIN 2353 Tube Fittings (L Series, 24E Cone)
Female Swivel 24E 45E
Elbow & O-Ring
H ose
S ize
Tube
S ize
Thread
S ize
Model Number
Part Number
3/16
6-L
M12x1.5
DKOL-45-03-12-SS
84306-120603
1/4
6-L
M12x1.5
DKOL-45-04-12-SS
1/4
8-L
M14x1.5
1/4
10-L
M16x1.5
5/16
10-L
M16x1.5
5/16
12-L
M18x1.5
3/8
10-L
M16x1.5
DKOL-45-06-16-SS
3/8
12-L
M18x1.5
1/2
15-L
M22x1.5
5/8
18-L
3/4
22-L
1"
Female Swivel 24E 90E
Elbow & O-Ring
Model Number
Part Number
84306-120604
DKOL-90-04-12-SS
84305-120604
DKOL-45-04-14-SS
84306-140804
DKOL-90-04-14-SS
84305-140804
DKOL-45-04-16-SS
84306-161004
DKOL-90-04-16-SS
84305-161004
DKOL-45-05-16-SS
84306-161005
DKOL-90-05-16-SS
84305-161005
DKOL-90-05-18-SS
84305-181205
84306-161006
DKOL-90-06-16-SS
84305-161006
DKOL-45-06-18-SS
84306-181206
DKOL-90-06-18-SS
84305-181206
DKOL-45-08-22-SS
84306-221508
DKOL-90-08-22-SS
84305-221508
M26x1.5
DKOL-45-10-26-SS
84306-261810
DKOL-90-10-26-SS
84305-261810
M30x2
DKOL-45-12-30-SS
84306-302212
DKOL-90-12-30-SS
84305-302212
28-L
M36x2
DKOL-45-16-36-SS
84306-362816
DKOL-90-16-36-SS
84305-362816
1-1/4
35-L
M45x2
DKOL-45-20-45-SS
84306-453520
DKOL-90-20-45-SS
84305-453520
1-1/2
42-L
M52x2
DKOL-45-24-52-SS
84306-584224
DKOL-90-24-52-SS
84305-584224
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 27 of 39
Stainless Steel Hose Fittings for DIN 2353 Tube Fittings (S Series, 24E Cone)
Metric Male 24E
H ose
S ize
Female Swivel 24E with O-Ring
Tube
S ize
Thread
S ize
Model Number
Part Number
Model Number
Part Number
1/4
8-S
M16x1.5
CES-04-16-SS
84203-160804
DKOS-04-16-SS
84804-160804
1/4
10-S
M18x1.5
CES-04-18-SS
84203-181004
DKOS-04-18-SS
84804-181004
5/16
10-S
M18x1.5
CES-05-18-SS
84203-181005
5/16
12-S
M20x1.5
CES-05-20-SS
84203-201205
DKOS-05-20-SS
84804-201205
3/8
10-S
M18x1.5
CES-06-18-SS
84203-181006
3/8
12-S
M20x1.5
CES-06-20-SS
84203-201206
DKOS-06-20-SS
84804-201206
3/8
14-S
M22x1.5
CES-06-22-SS
84203-221406
DKOS-06-22-SS
84804-221406
1/2
14-S
M22x1.5
CES-08-22-SS
84203-221408
1/2
16-S
M24x1.5
CES-08-24-SS
84203-241608
DKOS-08-24-SS
84804-241608
5/8
20-S
M30x2
CES-10-30-SS
84203-302010
DKOS-10-30-SS
84804-302010
3/4
30-S
M30x2
CES-12-30-SS
84203-302012
DKOS-12-30-SS
84804-302012
3/4
25-S
M36x2
CES-12-36-SS
84203-362512
DKOS-12-36-SS
84804-362512
1"
25-S
M36x2
CES-16-36-SS
84203-362516
DKOS-16-36-SS
84804-362516
1"
30-S
M42x2
CES-16-42-SS
84203-423016
DKOS-16-42-SS
84804-423016
1-1/4
38-S
M52x2
CES-20-52-SS
84203-423820
DKOS-20-52-SS
84804-523820
Female Swivel 24E 45E Elbow & O-Ring
Female Swivel 24E 90E Elbow & O-Ring
H ose
S ize
Tube
S ize
Thread
S ize
Model Number
Part Number
Model Number
Part Number
1/4
6-S
M14x1.5
DKOS-45-04-14-SS
84306-140604
DKOS-90-04-14-SS
84305-140604
1/4
8-S
M16x1.5
DKOS-45-04-16-SS
84306-160804
DKOS-90-04-16-SS
84305-160804
1/4
5/16
3/8
10-S
12-S
12-S
M18x1.5
M20x1.5
M20x1.5
DKOS-45-04-18-SS
DKOS-45-05-20-SS
DKOS-45-06-20-SS
84306-181004
84306-201205
84306-201206
DKOS-90-04-18-SS
DKOS-90-05-20-SS
DKOS-90-06-20-SS
84305-181004
84305-201205
84305-201206
3/8
14-S
M22x1.5
DKOS-45-06-22-SS
84306-221406
DKOS-90-06-22-SS
84305-221406
1/2
16-S
M24x1.5
DKOS-45-08-24-SS
84306-241608
DKOS-90-08-24-SS
84305-241608
5/8
20-S
M30x2
DKOS-45-10-30-SS
84306-302010
DKOS-90-10-30-SS
84305-302010
3/4
20-S
M30X2
DKOS-45-12-30-SS
84306-302012
DKOS-90-12-30-SS
84305-302012
3/4
25-S
M36x2
DKOS-45-12-36-SS
84306-362512
DKOS-90-12-36-SS
84305-362512
1"
25-S
M36x2
DKOS-45-16-36-SS
84306-362516
DKOS-90-16-36-SS
84305-362516
1"
30-S
M42x2
DKOS-45-16-42-SS
84306-423016
DKOS-90-16-42-SS
84305-423016
1-1/4
38-S
M50x2
DKOS-45-20-52-SS
84306-523820
DKOS-90-20-52-SS
84305-523820
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 28 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Stainless Steel JIC Hose Fittings
Male JIC
Female JIC
Hose
Size
Thread
Size
3/16
7/16 – 20
1/4
7/16 – 20
AGJ-04-04-SS
1/4
1/2 – 20
AGJ-04-05-SS
1/4
9/16 – 18
AGJ-04-06-SS
1/4
3/4 – 16
AGJ-04-08-SS
84140-1204
5/16
1/2 – 20
AGJ-05-05-SS
5/16
9/16 – 18
3/8
3/8
Model Number
Part Number
DKJ-03-04-SS
84142-0703
84140-0704
DKJ-04-04-SS
84142-0704
84140-0804
DKJ-04-05-SS
84142-0804
84140-0904
DKJ-04-06-SS
84142-0904
84140-0805
DKJ-05-05-SS
84142-0805
AGJ-05-06-SS
84140-0905
DKJ-05-06-SS
84142-0905
9/16 – 18
AGJ-06-06-SS
84140-0906
DKJ-06-06-SS
84142-0906
3/4 – 16
AGJ-06-08-SS
84140-1206
DKJ-06-08-SS
84142-1206
3/8
7/8 – 14
AGJ-06-10-SS
84140-1406
DKJ-06-10-SS
84142-1406
1/2
3/4 – 16
AGJ-08-08-SS
84140-1208
DKJ-08-08-SS
84142-1208
1/2
7/8 – 14
AGJ-08-10-SS
84140-1408
DKJ-08-10-SS
84142-1408
1/2
11 /1 6 – 12
5/8
7/8 – 14
AGJ-10-10-SS
5/8
11 /1 6 – 12
3/4
11 /1 6 – 12
5
Model Number
Part Number
DKJ-08-12-SS
84142-1708
84140-1410
DKJ-10-10-SS
84142-1410
AGJ-10-12-SS
84140-1710
DKJ-10-12-SS
84142-1710
AGJ-12-12-SS
84140-1712
DKJ-12-12-SS
84142-1712
3/4
1 /1 6 – 12
AGJ-12-16-SS
84140-2112
DKJ-12-16-SS
84142-2112
1"
11 /1 6 – 12
AGJ-16-12-SS
84140-1716
DKJ-16-12-SS
84142-1716
5
1"
1 /1 6 – 12
AGJ-16-16-SS
84140-2116
DKJ-16-16-SS
84142-2116
1"
15 /8 – 12
AGJ-16-20-SS
84140-2616
DKJ-16-20-SS
84142-2616
1-1/4
15 /8 – 12
AGJ-20-20-SS
84140-2620
DKJ-20-20-SS
84142-2620
7
1-1/2
1 /8 – 12
AGJ-24-24-SS
84140-3024
DKJ-24-24-SS
84142-3024
2"
21 /2 – 12
AGJ-32-32-SS
84140-4032
DKJ-32-32-SS
84142-4032
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 29 of 39
Stainless Steel JIC Hose Fittings
Female JIC 45E
Female JIC 90E
Hose
Size
Thread
Size
Model Number
Part Number
Model Number
Part Number
3/16
7/16 – 20
DKJ-45-03-04-SS
84139-0703
DKJ-90-03-04-SS
84138-0703
1/4
7/16 – 20
DKJ-45-04-04-SS
84139-0704
DKJ-90-04-04-SS
84138-0704
1/4
1/2 – 20
DKJ-45-04-05-SS
84139-0804
DKJ-90-04-05-SS
84138-0804
1/4
9/16 – 18
DKJ-45-04-06-SS
84139-0904
DKJ-90-04-06-SS
84138-0904
5/16
1/2 – 20
DKJ-45-05-05-SS
84139-0805
DKJ-90-05-05-SS
84138-0805
5/16
9/16 – 18
DKJ-45-05-06-SS
84139-0905
DKJ-90-05-06-SS
84138-0905
3/8
9/16 – 18
DKJ-45-06-06-SS
84139-0906
DKJ-90-06-06-SS
84138-0906
3/8
3/4 – 16
DKJ-45-06-08-SS
84139-1206
DKJ-90-06-08-SS
84138-1206
3/8
7/8 – 14
DKJ-45-06-10-SS
84139-1406
DKJ-90-06-10-SS
84138-1406
1/2
3/4 – 16
DKJ-45-08-08-SS
84139-1208
DKJ-90-08-08-SS
84138-1208
1/2
7/8 – 14
DKJ-45-08-10-SS
84139-1408
DKJ-90-08-10-SS
84138-1408
5/8
7/8 – 14
DKJ-45-10-10-SS
84139-1410
DKJ-90-10-10-SS
84138-1410
5/8
11 /1 6 – 12
DKJ-45-10-12-SS
84139-1710
DKJ-90-10-12-SS
84138-1710
3/4
11 /1 6 – 12
DKJ-45-12-12-SS
84139-1712
DKJ-90-12-12-SS
84138-1712
5
3/4
1 /1 6 – 12
DKJ-45-12-16-SS
84139-2112
DKJ-90-12-16-SS
84138-2112
1"
15 /1 6 – 12
DKJ-45-16-16-SS
84139-2116
DKJ-90-16-16-SS
84138-2116
5
1"
1 /8 – 12
DKJ-45-16-20-SS
84139-2616
DKJ-90-16-20-SS
84138-2616
1-1/4
15 /8 – 12
DKJ-45-20-20-SS
84139-2620
DKJ-90-20-20-SS
84138-2620
1-1/4
17 /8 – 12
DKJ-45-20-24-SS
84139-3020
DKJ-90-20-24-SS
84138-3020
7
1-1/2
1 /8 – 12
DKJ-45-24-24-SS
84139-3024
DKJ-90-24-24-SS
84138-3024
2"
21 /2 – 12
DKJ-45-32-32-SS
84139-4032
DKJ-90-32-32-SS
84138-4032
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 30 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Stainless Steel Code 61Flange
Code 61 Flange
Hose
Size
Flange
Size
1/2
1/2
Code 61 Flange 45E
Model Number
Part Number
Model Number
Part Number
1/2
FL3-08-08-SS
84182-0808
FL3-45-08-08-SS
84184-0808
3/4
FL3-08-12-SS
84182-1208
FL3-45-08-12-SS
84184-1208
5/8
3/4
FL3-10-12-SS
84182-1210
FL3-45-10-12-SS
84184-1210
3/4
3/4
FL3-12-12-SS
84182-1212
FL3-45-12-12-SS
84184-1212
3/4
1"
FL3-12-16-SS
84182-1612
FL3-45-12-16-SS
84184-1612
1"
1"
FL3-16-16-SS
84182-1616
FL3-45-16-16-SS
84184-1616
1"
1-1/4
FL3-16-20-SS
84182-2016
FL3-45-16-20-SS
84184-2016
1-1/4
1-1/4
FL3-20-20-SS
84182-2020
FL3-45-20-20-SS
84184-2020
1-1/4
1-1/2
FL3-20-24-SS
84182-2420
FL3-45-20-24-SS
84184-2420
1-1/2
1-1/2
FL3-24-24-SS
84182-2424
FL3-45-24-24-SS
84184-2424
1-1/2
2"
FL3-24-32-SS
84182-3224
FL3-45-24-32-SS
84184-3224
2"
2"
FL3-32-32-SS
84182-3232
FL3-45-32-32-SS
84184-3232
Hose
Size
Flange
Size
1/2
1/2
Code 61 Flange 90E
Model Number
Part Number
1/2
FL3-90-08-08-SS
84182-0808
3/4
FL3-90-08-12-SS
84182-1208
5/8
3/4
FL3-90-10-12-SS
84182-1210
3/4
3/4
FL3-90-12-12-SS
84182-1212
3/4
1"
FL3-90-12-16-SS
84182-1612
1"
1"
FL3-90-16-16-SS
84182-1616
1"
1-1/4
FL3-90-16-20-SS
84182-2016
1-1/4
1-1/4
FL3-90-20-20-SS
84182-2020
1-1/4
1-1/2
FL3-90-20-24-SS
84182-2420
1-1/2
1-1/2
FL3-90-24-24-SS
84182-2424
1-1/2
2"
FL3-90-24-32-SS
84182-3224
2"
2"
FL3-90-32-32-SS
84182-3232
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 31 of 39
Stainless Steel Code 62 Flange
Code 62 Flange
Hose
Size
Flange
Size
1/2
Code 62 Flange 45E
Model Number
Part Number
Model Number
Part Number
1/2
FL6-08-08-SS
84282-0808
FL6-45-08-08-SS
84284-0808
1/2
3/4
FL6-08-12-SS
84282-1208
FL6-45-08-12-SS
84284-1208
5/8
3/4
FL6-10-12-SS
84282-1210
FL6-45-10-12-SS
84284-1210
3/4
3/4
FL6-12-12-SS
84282-1212
FL6-45-12-12-SS
84284-1212
3/4
1"
FL6-12-16-SS
84282-1612
FL6-45-12-16-SS
84284-1612
1"
1"
FL6-16-16-SS
84282-1616
FL6-45-16-16-SS
84284-1616
1"
1-1/4
FL6-16-20-SS
84282-2016
FL6-45-16-20-SS
84284-2016
1-1/4
1-1/4
FL6-20-20-SS
84282-2020
FL6-45-20-20-SS
84284-2020
1-1/4
1-1/2
FL6-20-24-SS
84282-2420
FL6-45-20-24-SS
84284-2420
1-1/2
1-1/2
FL6-24-24-SS
84282-2424
FL6-45-24-24-SS
84284-2424
1-1/2
2"
FL6-24-32-SS
84282-3224
FL6-45-24-32-SS
84284-3224
2"
2"
FL6-32-32-SS
84282-3232
FL6-45-32-32-SS
84284-3232
Code 62 Flange 90E
Hose
Size
Thread
Size
1/2
1/2
Model Number
Part Number
1/2
FL6-90-08-08-SS
84283-0808
3/4
FL6-90-08-12-SS
84283-1208
5/8
3/4
FL6-90-10-12-SS
84283-1210
3/4
3/4
FL6-90-12-12-SS
84283-1212
3/4
1"
FL6-90-12-16-SS
84283-1612
1"
1"
FL6-90-16-16-SS
84283-1616
1"
1-1/4
FL6-90-16-20-SS
84283-2016
1-1/4
1-1/4
FL6-90-20-20-SS
84283-2020
1-1/4
1-1/2
FL6-90-20-24-SS
84283-2420
1-1/2
1-1/2
FL6-90-24-24-SS
84283-2424
1-1/2
2"
FL6-90-24-32-SS
84283-3224
2"
2"
FL6-90-32-32-SS
84283-3232
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 32 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Miscellaneous Stainless Steel Hose Fittings
Banjo Hose End
Hose
Size
Bolt
Size
1/4
1/4
RNM / RNR
Hollow Bolt
F15
Bolt
Thread
Model Number
Part Number
Model Number
Part Number
M12
RNM-04-12-SS
84116-1204
M14
RNM-04-14-SS
84116-1404
M12 X 1.5
F15 M12X1.5 SS
Z1092 12
M14 X 1.5
F15 M14X1.5 SS
5/16
M16
RNM-05-16-SS
84116-1605
Z1092 14
M16 X 1.5
F15 M16X1.5 SS
Z1092 16
3/8
M14
RNM-06-14-SS
84116-1406
3/8
M16
RNM-06-16-SS
84116-1606
M18 X 1.5
F15 M18X1.5 SS
Z1092 18
M20 X 1.5
F15 M20X1.5 SS
3/8
M18
RNM-06-18-SS
84116-1806
M22 X 1.5
F15 M22X1.5 SS
Z1092 22
1/2
M18
RNM-08-18-SS
84116-1808
M26 X 1.5
F15 M26X1.5 SS
Z1092 26
1/2
M20
RNM-08-20-SS
84116-2008
M30 X 1.5
F15 M30X1.5 SS
Z1092 30
1/2
M22
RNM-08-22-SS
84116-2208
3/4
M26
RNM-12-26-SS
84116-2612
3/4
M30
RNM-12-30-SS
84116-3012
1/4
1/4 BSP
RNR-04-04-SS
84111-0404
1/4 BSPP
F15 R1/4 SS
Z1090 04
5/16
3/8 BSP
RNR-05-06-SS
84111-0605
3/8 BSPP
F15 R3/8 SS
Z1090 06
3/8
3/8 BSP
RNR-06-06-SS
84111-0606
1/2 BSPP
F15 R1/2 SS
Z1090 08
3/8
1/2 BSP
RNR-06-08-SS
84111-0806
3/4 BSPP
F15 R3/4 SS
Z1090 12
1/2
3/8 BSP
RNR-08-06-SS
84111-0608
1 BSPP
F15 R1 SS
Z1090 16
1/2
1/2 BSP
RNR-08-08-SS
84111-0808
3/4
3/4 BSP
RNR-08-12-SS
84111-0812
3/4
3/4 BSP
RNR-12-12-SS
84111-1212
1"
1" BSP
RNR-16-16SS
84111-1616
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 33 of 39
316SS Interlock Crimp Ferrules / 316SS Interlock NPT Hose Fittings
Crimp Ferrule 4SH Hose Interlock
Crimp Ferrule 100R13 Hose Interlock
Hose I.D.
Model Number
Part Number
Model Number
Part Number
3/4
HPF-4SH-12
ZA61010-1200
HPF-13-12
ZA61010-1200
1"
HPF-4SH-16
ZA61010-1600
HPF-13-16
ZA61010-1600
1-1/4
HPF-4SH-20
ZA61010-2000
HPF-13-20
Z61010-2000
1-1/2
HPF-4SH-24
ZA61010-2400
HPF-13-24
Z61010-2400
2"
HPF-4SH-32
ZA61010-3200
HPF-13-32
Z61010-3200
Male NPT Interlock
Hose I.D.
NPT Thread Size
Model Number
Part Number
3/4
3/4 -14
HAGN-12-12-SS
Z64161-1212
1
1 - 11.5
HAGN-16-16-SS
Z64161-1616
1-1/4
11/4 - 11.5
HAGN-20-20-SS
Z64161-2020
1-1/2
1
1 /2 - 11.5
HAGN-24-24-SS
Z64161-2424
2
2 - 11.5
HAGN-32-32-SS
Z64161-3232
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 34 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
316SS Interlock BSPP Hose Fittings
0
Male BSPP Interlock
Female BSPP Interlock
Hose
I.D.
BSPP
Thread
Model Number
Part Number
Model Number
Part Number
3/4
3/4 - 14
HAGR-12-12-SS
Z64112-1212
HDKR-12-12-SS
Z64100-1212
1"
1 - 11
HAGR-16-16-SS
Z64112-1616
HDKR-16-16-SS
Z64100-1616
1-1/4
11/4 - 11
HAGR-20-20-SS
Z64112-2020
HDKR-20-20-SS
Z64100-2020
1-1/2
1
1 /2 - 11
HAGR-24-24-SS
Z64112-2424
HDKR-24-24-SS
Z64100-2424
2"
2 - 11
HAGR-32-32-SS
Z64112-3232
HDKR-32-32-SS
Z64100-3232
0
v
Female BSPP 90E Interlock
Female BSPP 45E Interlock
Hose
I.D.
BSPP
Thread
Model Number
Part Number
Model Number
Part Number
3/4
3/4 - 14
HDKR-45-12-12-SS
Z64108-1212
HDKR-90-12-12-SS
Z64107-1212
1"
1 - 11
HDKR-45-16-16-SS
Z64108-1616
HDKR-90-16-16-SS
Z64107-1616
1-1/4
11/4 - 11
HDKR-45-20-20-SS
Z64108-2020
HDKR-90-20-20-SS
Z64107-2020
1-1/2
11/2 - 11
HDKR-45-24-24-SS
Z64108-2424
HDKR-90-24-24-SS
Z64107-2424
2"
2 - 11
HDKR-45-32-32-SS
Z64108-3232
HDKR-90-32-32-SS
Z64107-3232
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 35 of 39
316SS Interlock DIN2353 Hose Fittings
Male DIN2353 S Series Interlock
Female DIN2353 Interlock
Hose
I.D.
Tube
Size
Thread
Model Number
Part Number
Model Number
Part Number
3/4
20-S
M30x2
HCES-12-30-SS
Z64203-302012
HDKOS-12-30-SS
Z64204-302012
3/4
25-S
M36x2
HCES-12-36-SS
Z64203-362512
HDKOS-12-36-SS
Z64204-362512
1"
30-S
M42x2
HCES-16-42-SS
Z64203-423016
HDKOS-16-42-SS
Z64204-423016
1-1/4
38-S
M52x2
HCES-20-52-SS
Z64203-523820
HDKOS-20-52-SS
Z64204-523820
Female DIN2353 45E Interlock
Hose
I.D.
Tube
Size
Female DIN2353 90E Interlock
Thread
Model Number
Part Number
Model Number
Part Number
3/4
20-S
M30x2
HDKOS-45-12-30-SS
Z64206-302012
HDKOS-90-12-30-SS
Z64205-302012
3/4
25-S
M36x2
HDKOS-45-12-36-SS
Z64206-362512
HDKOS-90-12-36-SS
Z64205-362512
1"
30-S
M42x2
HDKOS-45-16-42-SS
Z64206-423016
HDKOS-90-16-42-SS
Z64205-423016
1-1/4
38-S
M52x2
HDKOS-45-20-52-SS
Z64206-523820
HDKOS-90-20-52-SS
Z64205-523820
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 36 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
316SS Interlock JIC Hose Fittings
Male JIC Interlock
Female JIC Interlock
Hose
I.D.
Tube
Size
Thread
Model Number
Part Number
Model Number
Part Number
3/4
3/4
11 /1 6 - 12
HAGJ-12-12-SS
Z64140-1712
HDKJ-12-12-SS
Z64142-1712
1"
1"
1 /1 6 - 12
HAGJ-16-16-SS
Z64140-2116
HDKJ-16-16-SS
Z64142-2116
1-1/4
1-1/4
15 /8 - 12
HAGJ-20-20-SS
Z64140-2620
HDKJ-20-20-SS
Z64142-2620
1-1/2
1-1/2
1 /8 - 12
HAGJ-24-24-SS
Z64140-3024
HDKJ-24-24-SS
Z64142-3024
2"
2"
2 /2 - 12
HAGJ-32-32-SS
Z64140-4032
HDKJ-32-32-SS
Z64142-4032
5
7
1
0
v
Female JIC 90E Interlock
Female JIC 45E Interlock
Hose
I.D.
Tube
Size
Thread
Model Number
Part Number
Model Number
Part Number
3/4
3/4
11 /1 6 - 12
HDKJ-45-12-12-SS
Z64139-1712
HDKJ-90-12-12-SS
Z64138-1712
1"
1"
1 /1 6 - 12
HDKJ-45-16-16-SS
Z64139-2116
HDKJ-90-16-16-SS
Z64138-2116
1-1/4
1-1/4
15 /8 - 12
HDKJ-45-20-20-SS
Z64139-2620
HDKJ-90-20-20-SS
Z64138-2620
1-1/2
1-1/2
1 /8 - 12
HDKJ-45-24-24-SS
Z64139-3024
HDKJ-90-24-24-SS
Z64138-3024
5
7
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 37 of 39
316SS Interlock Code 61 Flange Hose Fittings
0
Code 61 Flange Interlock
Code 61 Flange 45E Interlock
Hose
I.D.
Flange
Size
Model Number
Part Number
Model Number
Part Number
3/4
3/4
HFL3-12-12-SS
Z64182-1212
HFL3-45-12-12-SS
Z64184-1212
3/4
1"
HFL3-12-16-SS
Z64182-1612
HFL3-45-12-16-SS
Z64184-1612
1"
1"
HFL3-16-16-SS
Z64182-1616
HFL3-45-16-16-SS
Z64184-1616
1"
1-1/4
HFL3-16-20-SS
Z64182-2016
HFL3-45-16-20-SS
Z64184-2016
1-1/4
1-1/4
HFL3-20-20-SS
Z64182-2020
HFL3-45-20-20-SS
Z64184-2020
1-1/4
1-1/2
HFL3-20-24-SS
Z64182-2420
HFL3-45-20-24-SS
Z64184-2420
1-1/2
1-1/2
HFL3-24-24-SS
Z64182-2424
1-1/2
2"
HFL3-24-32-SS
Z64182-3224
2"
2"
HFL3-32-32-SS
Z64182-3232
v
Code 61 Flange 90E Interlock
Hose
I.D.
Flange
Size
3/4
3/4
Model Number
Part Number
3/4
HFL3-90-12-12-SS
Z64183-1212
1"
HFL3-90-12-16-SS
Z64183-1612
1"
1"
HFL3-90-16-16-SS
Z64183-1616
1"
1-1/4
HFL3-90-16-20-SS
Z64183-2016
1-1/4
1-1/4
HFL3-90-20-20-SS
Z64183-2020
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
Page 38 of 39
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
316SS Interlock Code 62 Flange Hose Fittings
Code 62 Flange Interlock
Hose
I.D.
Flange
Size
Model Number
Part Number
3/4
3/4
HFL6-12-12-SS
3/4
1"
HFL6-12-16-SS
1"
1"
1"
1-1/4
1-1/4
1-1/4
Code 62 Flange 45E Interlock
Model Number
Part Number
Z64282-1212
HFL6-45-12-12-SS
Z64284-1212
Z64282-1612
HFL6-45-12-16-SS
Z64284-1612
HFL6-16-16-SS
Z64282-1616
HFL6-45-16-16-SS
Z64284-1616
HFL6-16-20-SS
Z64282-2016
HFL6-45-16-20-SS
Z64284-2016
1-1/4
HFL6-20-20-SS
Z64282-2020
HFL6-45-20-20-SS
Z64284-2020
1-1/2
HFL6-20-24-SS
Z64282-2420
HFL6-45-20-24-SS
Z64284-2420
1-1/2
1-1/2
HFL6-24-24-SS
Z64282-2424
HFL6-45-24-24-SS
Z64284-2424
1-1/2
2"
HFL6-24-32-SS
Z64282-3224
HFL6-45-24-32-SS
Z64284-3224
2"
2"
HFL6-32-32-SS
Z64282-3232
HFL6-45-32-32-SS
Z64284-3232
Code 62 Flange 90E Interlock
Hose
I.D.
Flange
Size
Model Number
Part Number
3/4
3/4
HFL3-90-12-12-SS
Z64283-1212
3/4
1"
HFL3-90-12-16-SS
Z64283-1612
1"
1"
HFL3-90-16-16-SS
Z64283-1616
1"
1-1/4
HFL3-90-16-20-SS
Z64283-2016
1-1/4
1-1/4
HFL3-90-20-20-SS
Z64283-2020
1-1/4
1-1/2
HFL3-90-20-24-SS
Z64283-2420
1-1/2
1-1/2
HFL3-90-24-24-SS
Z64283-2424
1-1/2
2
HFL3-90-24-32-SS
Z64283-3224
2
2
HFL3-90-32-32-SS
Z64283-3232
W illia m s Flu id a ir C o rp o ra tio n Lim ite d
1018 Salk Road Pickering, Ontario Canada L1W 3C5
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com W: www.williamsfluidair.com
Page 39 of 39