MetalKleen 30L Brochure

MetalKleen 30L ULTRASONIC CLEANER
Industrial Workshops & Automotive Industry
Supported in Australia. Certified to Australian standards. Built to last.
MetalKleen 30L
FEATURES AT A GLANCE
AUTOMATIC HEATING
Built-in digital thermometer and timer
for full temperature and cleaning cycle
management
DEGAS MODE
Intermittent operation of ultrasonic power
for rapid removal of entrained air from
liquids
SWEEP FUNCTION
Sweep function to optimise the cleaning
power by modulating the frequency
EASY LIQUID DRAINING
Side drain valve and included drainage
hose allow for easy removal of cleaning
solution
99
DIGITAL DISPLAY
Easy-to-read digital display to set time,
temperature, and degas time (using mode
and up/down buttons)
CONTROL PANEL
User-friendly control panel for easy and
simple operation
MORE METALKLEEN 30L FEATURES:
• Ultrasonic tank is SUS304 Stainless Steel
for superior durability and corrosion
resistance
• Powered by a high-performance industrial
BLT type transducer array for 600W
ultrasonic power output
1300 79 73 79
www.kleentek.net.au
The MetalKleen series of industrial ultrasonic
cleaners by Kleentek are designed specifically
to assist with cleaning mechanical and engine
components where weir systems are not
required.
The parts basket included with the MetalKleen
30L will accommodate any part(s) that will
fit within the dimensions of 420mm long by
210mm wide, and up to 130mm high (liquid
working depth). This unit is a single tank system
designed for benchtop use to clean smaller
parts and components. It features a sidemounted drain with high quality check valve.
The combination of ultrasonic cleaning with
specially designed cleaning solutions can
effectively replace other manual cleaning
methods such as kerosene tanks, robo-washers
or bead and sand blasting.
The MetalKleen 30L is a powerful and easy
to operate machine that can bring immediate
benefits and efficiencies to your cleaning
processes. Once set up and running, staff
are freed up to perform other tasks while the
cleaner looks after itself.
MetalKleen 30L
APPLICATIONS FOR USE
The Metalkleen 30L is a light duty general
workshop ultrasonic machine ideally suited
to the removal of contaminants such as
carbon, old lubricants, scale, rust, resins and
paint from smaller parts. Suitable for use in
automotive, marine, diesel, hydraulics and
small workshops. This includes:
•
•
•
•
•
•
Carburetors and fuel injectors
Hydraulic pump bodies and components
Diesel pumps and components
Filters
CNC cutting tools
Outboard and motorcycle heads and
barrels
• Mower and bush cutter parts
• Bicycles gears and associated parts
“Saves us an unbelievable amount of
labour cleaning rust, paint and scale off
pump parts... couldn’t work without it.”
— Matt Crowley, Weir Minerals
“We recondition earth moving and
mining transmissions and powertrain
components. These parts are mainly
contaminated with rust and old
two-pack paint which needs to be
completely removed. Kleentek
Ultrasonics has achieved perfect results
with contaminants that are really
difficult to remove, with fast turnaround times.”
— Chris Gilmore - Powertrain Services
1300 79 73 79
www.kleentek.net.au
Before
Titanium parts before and after ultrasonic cleaning
Before
Planer blades before and after ultrasonic cleaning
Before
Metal filters before and after ultrasonic cleaning
MetalKleen 30L
CHEMICAL SOLUTIONS
OFFICIAL SPONSOR OF HOLDEN RACING TEAM
The following Kleentek chemical products are
recommended for use with the MetalKeen 30L
in an automotive or engineering workshop
environment:
Click above to watch the Holden Racing Team video
Ferrocarb
Removes carbon, paint,
rust and lead deposits on
ferrous metals
ALLOYSolv
Removes carbon, oils,
grease and paint from
alloy and ferrous metals
Desludge
Rapid penetration and
removal of most soils off
all surfaces
FX Degreaser
Removes light
contaminates from any
surface-oils, dirt, light
carbon
Our full range of
ultrasonic cleaning
chemicals can
be viewed and
ordered through
our website.
Anti-Rust
Rust inhibitor rinse
solution
1300 79 73 79
www.kleentek.net.au
WHY ULTRASONIC CLEANING?
Stop wasting your time on repetitive and
laborious cleaning tasks when you could be
using your valuable time more productively.
These are just some of the benefits of
ultrasonic cleaning:
• It cleans faster, reducing the time required
for a cleaning cycle and is a superior
method for cleaning parts with cavities and
blind holes.
• It is efficient and requires less handling of
parts - reducing the need for disassembly
in order to clean.
• Using water-based detergents reduces the
need of harsh solvents which makes the
process safer.
• Ultrasonic cleaning requires minimal
manual labor intervention, meaning staff
are free to carry out other work.
• Ultrasonic cleaning gives consistent results
and does not require operator skills.
• Ultrasonic cleaning means non-contact
cleaning - only the contamination is
removed, not the substrate.
MetalKleen 30L
TECHNICAL SPECIFICATIONS
Dimensions & Capacity
Overall Unit
L580 x W340 x H360 (mm)
Ultrasonic Tank
L480 x W280 x H200 (mm)
Parts Basket
L440 x W230 x H130 (mm)
Liquid Working
Depth
130mm
Bath Capacity
30 Litres
Powered by a highperformance industrial
BLT type transducer array
Sturdy and durable
Stainless Steel SS304
parts basket
Side-mounted drainage
valve
Simple control panel for
easy operation
Ultrasonic Tank Components
Transducer
Base mounted Industrial BLT
Tranducers (600W)
Ultrasonic Power
600W
Solution Heating
Pad Heaters (400W)
“I use my [MK40L] on a daily basis
removing mainly rust and paint, and also
have an anti-rust solution in the rinse
tank to stop the cleaned part re-rusting.
This is an awesome machine and is a real
asset to my business.”
— Gengiz Simsir, GHM Diesel Services
“We have been using a [MK30L] for
just over six months cleaning marine
carburetors and outboard parts... this
machine is invaluable to our workshop”
— Dan, Reef Marine
1300 79 73 79
www.kleentek.net.au
Warranty & Service
Kleentek ultrasonic cleaners, when used in accordance
with manufacturer’s instructions and under normal use,
are guaranteed for one year after date of shipment.
Within the period guaranteed, Kleentek will repair
or replace free of charge, all parts that are defective
because of material or workmanship.
Kleentek cleaners are designed to operate only with
non-flammable water-based solutions. We recommend
the use of Kleentek’s specialised range of chemical
solutions with your MetalKleen unit.
KLEENTEK METALKLEEN RANGE
30L
40L
Transducer
150L
Industrial BLT Type
Digital Timer
•
•
•
Heater
•
•
•
Frequency
28kHz
Power Settings
Adjustable
Housing
Stainless Steel SUS 304
30 Litres
36 Litres
150 Litres
L580xD340xH360mm
L1100xW580xH830mm
L2100xW650xH900mm
L480xW280xH200m
L500xW300xH230mm
L900xW400xH450mm
No Rinse Tank
L500xW300xH230mm
L2100xW650xH900mm
L440xW230xH130mm
(Liquid depth 130mm)
L360xW260xH140mm
(Liquid depth 210mm)
L860xW360xH150mm
(Liquid depth 360mm)
Ultrasonic Power
600W
600W
2400W
Net Weight
30Kg
130Kg
260Kg
10 Amp
10 Amp
15 Amp
L660xW460xH460mm
L1200xW820xH1140mm
L2180xW820xH1140mm
Bath Capacity
Overall Dimensions
Ultrasonic Tank Dimensions
Rinse Tank
Basket Dimensions
Power Supply Requirements
Packed Dimensions
SAFETY CERTIFICATIONS & COMPLIANCE
All Kleentek MetalKleen units comply
with the approval and test specification
- general requirements for electrical
equipment - AS/NZS 3100:2009
and AS 4024 - Safety of Machines.
Kleentek is an ISO 9001:2008 certified
company.
Phone: 1300 79 73 79
Email: sales@kleentek.net.au
Web: www.kleentek.net.au
10 / 100 Sugar Road, PO Box 5289
Maroochydore QLD 4558
Industrial Ultrasonics | Bin Washers | Rentals | Servicing | Chemicals