Engine Parts - Muzzimotorsport

Engine Parts
Racing Engine
Complete S14 racing engine, built by Linder!
Price on
application!
Freely programmable engine management system
Alpha N management system – freely programmable
Freely programmable unit with new cable harness, tested on the test bed!
MUST HAVE!
€ 4500,--
info@muzzimotorsport.com
Engine mounting brackets Gr. A
S14 engine mounting, similar to Gr. A, reinforced!
Recommended when fitting the GR. A DTM alloy engine mountings!
Delivery of the right and left engine bracket!
€ 380,--
Engine mountings Gr. A
Gr. A DTM alloy engine mountings!
Solid fixing of the engine!
To be used only together with Gr. A DTM alloy transmission mounting – see gear box
parts!
info@muzzimotorsport.com
€ 140,--
Teflon engine mounting
Rigid teflon engine mountings
€ 98,--
Alternative to the alloy mounting!
Price set piece
Vibration damper alloy for flat belts
Gr. A DTM vibration damper made of aluminium machined!
Now new, track for 2nd belt, for Servo! For flat belts! Very light!
info@muzzimotorsport.com
€ 280,--
Servo pump pulley wheel alloy for flat belt
Alloy servo pump pulley for flat belt!
€ 190,--
Diameter 125mm!
Developed by us!
Modification of the servo pump position necessary!
Water pump pulley wheel DTM Gr. A flat belt
DTM alloy water pump pulley wheel for flat belt!
Diameter 125mm!
Now toughened like the original!
€ 190,--
Alternator wheels flat belt
info@muzzimotorsport.com
80mm
Alloy alternator wheel for flat belt without cooling veins.
The original cooling wheel must be fitted; diameter of 80mm or
105mm! Now toughened, suitable with water pump wheels!
€ 140,-105mm
€ 150,--
Alternator wheel flat belt with cooling wheel DTM
105mm €
DTM Alloy alternator wheel for flat belt!
Diameter of 105 mm or 125 mm with integrated cooling wheel!
Alternator mounting Teflon
info@muzzimotorsport.com
240,-125mm € 260,--
Gr. A DTM Teflon alternator mounting!
€ 25,--
For the original alternator of the M3 E30!
Keeping the alternator in a horizontal and fixed position!
The original rubber in no longer needed! No more unaligned alternator!!
radiator DTM Gr. A black
Alloy racing radiator in original form! 3 core! Hose
attachment as in the Gr. A, black lacquered, with round
top!
radiator DTM Gr. A
Gr. A DTM alloy motorsport radiator!
info@muzzimotorsport.com
€ 960,--
Same dimensions as the original part, as well as the fixings, but 5cm thick 3 core!
€ 870,--
Some easy adjustments on the hoses needed!
Not necessary with original Gr. A water hoses!
Extreme cooling!
Airbox Carbon DTM Gr. A
large carbon airbox for 48 mm restrictor.
With attachments:
break fluid container, air intakes, connecting hose, throttle cable, etc.
Also available for double-injection!
price on request!
restrictors 48 – 49 mm Gr. A
info@muzzimotorsport.com
€ 1.250,--
€ 450,-Restrictors-modification, from 46mm to
48mm or 49mm drilled!
Only drilled 48-49mm, without machining
with restrictor price € 450
€ 560,--
Drilling 48-49mm and machined finish for smoother flow
Price € 560
Complete overhaul
Drilling 48-49mm with machining to max. flow and finishing, fully assembled, top version!
Price € 970
€970,--
Throttle cable holder carbon airboxes
€ 65,-Throttle cable holder for carbon airboxes
Exhaust manifold DTM 4-1-2
info@muzzimotorsport.com
Exhaust manifold DTM 4-1-2
4x attached pipes, 53x1,5mm big flange
With flame pipe and lambda attachment
€ 2.200,--
Comes as seen in picture, complete!
According to original Gr. A pattern!
Exhaust system DTM
Custom made DTM Gr. A exhaust system!
From the manifold!
With end silencer, middle silencer or catalyst converters! End silencer DTM all in
stainless steel and welded!
Made to suit the vehicle!
Not in stock!
€ 2.200,--
info@muzzimotorsport.com
Flywheel light DTM Gr. A
€ 450,--
Gr.A flywheel!
Machined flywheel, very light and electronically balanced!
Exchange unit for a used flywheel in good condition!
Machining for a 184mm clutch, upon request!
conrods racing sport S14
racing sport H shaft conrods!
Final weight 450g, compacted surface!
Hard wearing! Measure 144mm. These conrods are especially designed and
developed for our needs and are not available anywhere else!
Tested up to 10,000 RPM!!!
4 pieces, complete with bolts
info@muzzimotorsport.com
€ 1800,--
pistons
Various racing sport –forged pistons!
For all S14 Engines!
Tappets single
info@muzzimotorsport.com
Preis auf
Anfrage
Single motorsport tappets for adjusting clearance on the valve stem!
Available for the long motorsport-valves or for short original valves!
Price 16 Pc. €
890,--
Suitable for all S14 Engines!
camshaft
Sport and motorsport camshaft from our development. Different lift
for Inlet and exhaust valves. For S14 Engines!
Racing valves
Racing valves in all variations for inlet and exhaust Gr. A and DTM.
info@muzzimotorsport.com
Price upon
request!
Top-Quality – tested in racing conditions – reasonable price!
For all S14 Engines!
Price on
application!
Inlet-racing valve 38.5mm diameter. Price per pice € 63
Exhaust - racing valve 32.5mm diameter. Price per pice € 76
Valve stem guides S14
Price per set
Valve stem guides, new, 16 Pc. for S14 engines!
Diameter 12.07 shaft 7mm
38mm lengths optional for machined heads
Cylinder head machining for DTM Linder
info@muzzimotorsport.com
€ 192,-Price per piece.:
€ 12,--
Price Inlet ports
DTM
Inlet ports machined to Gr. A or DTM standard!!
€ 820,--
Original Linder-Ports!!
The Ports will be machined as in the past by Linder!
Made directly by Linder with CNC program!!
Distributer cover DTM
Alloy cover for camshaft driven DTM Engines or for racing engines with dormant
ignition!
Fits on the casing of the cylinder head!
Cylinder head water pipe - short DTM
info@muzzimotorsport.com
€ 67,--
Short DTM water pipe on the cylinder head!
€ 180,--
reconstructed from the original water pipe!
For use without thermostat!
Holder for fuel pressure regulator DTM Gr. A
Alloy Holder for adjustable BMW fuel pressure regulator!
Also available, matching adjustable Bosch pressure regulator. To be fitted on the
return with Dash 6 connection! € 380
€ 210,--
Fuel rail DTM Gr. A
Fuel rail for DTM Gr.A !
info@muzzimotorsport.com
The fittings are to be fixed to the air box and restrictor!
€ 340,--
Fittings not included!!
Front and rear Dash6 connection!
Condition as new!
Fuel rail holder DTM Slider
€ 179,-Fuel rail holder alloy for round Gr. A fuel rail!
Suitable for DTM sliding systems!
Fuel rail holder Gr. A restrictor
info@muzzimotorsport.com
€ 179,-Alloy fuel rail holder – round Gr. A fuel rail for restrictor 46mm and 48mm
KW breather container DTM Gr. A new
€ 180,-New DTM Gr. A crank case breather!
With dash connections, D6 and D12!
Lid drilled and sealed with foam!
info@muzzimotorsport.com