Flues Parts List

Transcription

Flues Parts List

INDUSTRIES
Effective June 2011 – March 2012
www.davin.co.nz
To order: fax: +64.3.384.9666 flues@davin.co.nz
Info/Technical: telephone +64.3.384.3099
Flue Component Catalogue
1
www.davin.co.nz
IMPORTANT NOTICE
This catalogue is issued subject to the following conditions.
•
Goods ordered from this catalogue are subject to the standard terms and conditions of Davin
Industries Limited.
•
Please observe relevant installation and operating conditions pertaining to specific products
when ordering.
•
All technical specifications, including drawings, in this catalogue are provided for general
information only. Please ensure your use and/or installation complies with the relevant Building
Act and Local Body Regulations in your area. Davin Industries Limited assumes no responsibility
for incorrect application or installation of any components based on the information provided in
this catalogue.
•
All details are subject to change without notice.
This catalogue is in effect from June 1st 2011. If you have any questions about the information contained
in this document please call us on 03.384.3099.
CONTACT DETAILS
Inwards/Outwards Goods Address:
Newtown Street (Off Maces Road)
Christchurch
Office Address:
11 Edison Place
Bromley
Christchurch
Postal Address:
PO Box 24015
Christchurch
Contact details:
flues@davin.co.nz
Phone: 03 384 3099
Fax: 03 384 9666
2
www.davin.co.nz
TABLE OF CONTENTS
QUICK PARTS LIST ..............................................................................................................................6
Kits ......................................................................................................................................................................... 6
Stainless Steel Flues (1200mm lengths) ................................................................................................................. 6
Stainless Steel Flues (600mm lengths) ................................................................................................................... 6
Galvanised Steel Liners (1200mm lengths) ............................................................................................................ 6
Galvanised Steel Liners (600mm lengths) .............................................................................................................. 7
Cowls...................................................................................................................................................................... 7
Flashing Cones ....................................................................................................................................................... 7
Cowl, Cone and Top Spider Bracket Sets ................................................................................................................ 8
Spider and Spacer Brackets.................................................................................................................................... 8
Mounting Rails ....................................................................................................................................................... 9
Stainless Steel Offsets ............................................................................................................................................ 9
Galvanised Steel Offsets ........................................................................................................................................ 9
Stainless Steel Fixed Bends – 45° ........................................................................................................................... 9
Galvanised Fixed Bends – 45° ................................................................................................................................ 9
Offset Bend Kits (comprising of two SS and two galv fixed bends) ...................................................................... 10
Offset Bend Kits (comprising of one SS and one galv telescopic bend)................................................................ 10
Extension Kits ....................................................................................................................................................... 10
Additional Components ....................................................................................................................................... 10
Ceiling Plates........................................................................................................................................................ 11
Shields .................................................................................................................................................................. 11
KITS ..................................................................................................................................................13
Ø150mm Insert Flue Kit – 4.2m ................................................................................................................ 13
Revolving Cowl (shown) (2020)............................................................................................................................ 13
Fixed Cowl (2025) ................................................................................................................................................ 13
Ø150mm Satin Black Stainless Steel Flue Kit 4.2m ................................................................................... 14
Stainless Steel (2075)
Satin Black (2074).......................................................................................................... 14
Ø150mm Stainless Steel Free Standing Flue Kit 3.6m .............................................................................. 15
Satin Black (2023).......................................................................................................... 15
Ø150mm Ceiling-Up Kit (2021) ................................................................................................................. 15
Stainless Steel (2021) ........................................................................................................................................... 15
Ø175mm Free Standing Flue Kit 4.2m ...................................................................................................... 15
Satin Black (2017) ................................................................................................................................................ 15
COMPONENTS .................................................................................................................................16
Galvanised Liners (1xx) ............................................................................................................................. 16
Stainless Steel Flues (2xx) ......................................................................................................................... 17
Combination Liners (1xx/8212) ................................................................................................................ 18
Cowls (4xx/502) ........................................................................................................................................ 19
Revolving Cowls
Fixed Cowls ......................................................................................................................... 19
Cowl, Cone & Top Spider Sets (5xx) .......................................................................................................... 19
“H” Top Cowl and Flashing Cone Set (5xx) ............................................................................................... 20
ADD Cowls, H-Top Cowls and Flashing Cones (individual items) (5xx/8xxx) ............................................ 20
Top Spider Brackets (6xx) ......................................................................................................................... 21
Plain Spacer Brackets (6xx) ....................................................................................................................... 21
Bottom Spider Brackets (6xx) ................................................................................................................... 21
Mounting Rails (7xx) ................................................................................................................................. 22
3
www.davin.co.nz
Telescopic Offsets (8xx/8xxx) ................................................................................................................... 22
Combination Offsets (400mm centres) .................................................................................................... 22
Tee-Piece (808) ......................................................................................................................................... 23
Adjustable Bend (820) .............................................................................................................................. 23
Fixed Bend – 45 Degree (8xx/8xxx)........................................................................................................... 23
“Touch Up” Aerosol Cans (8xx) ................................................................................................................. 23
Starter Rings (816) .................................................................................................................................... 24
Floor Penetration Units (8xx).................................................................................................................... 24
Chimney Flashing Plate (849) ................................................................................................................... 24
Energy/Heat Saver Add-On Kit (8121) ...................................................................................................... 25
Ceiling Plates (9xx) .................................................................................................................................... 26
Shields/Reflectors (1xx/1xxx) ................................................................................................................... 27
APPENDICES .....................................................................................................................................29
Information Note for Building Inspectors Re: Davin Industries Flue Systems ...................................................... 29
Thermal Testing Report for #2023 Double Shielded Flue Kit ............................................................................... 29
Safety Opinion Report for #2074 Flue Kit............................................................................................................. 36
4
www.davin.co.nz
QUICK PARTS LIST
5
www.davin.co.nz
QUICK PARTS LIST
Kits
2033
2034
2035
2020
2025
2021
2022
2023
2075
2074
2017
2013
Free Standing Gas Flue Kit
Zero Clearance Gas Flue Kit
Chimney Liner Gas Flue Kit
Insert Flue Kit
Insert Flue Kit
Ceiling-Up Kit
Free Standing Flue Kit
Ø100
Ø100
Ø100
Ø150 (Revolving Cowl)
Ø150 (Fixed Cowl)
Ø150
Ø150 (3.6m, S/S)
Ø150 (3.6m, Satin Black)
Ø150 (4.2m, S/S)
Stainless Steel Flues (1200mm lengths)
200
215
246
201
202
202SB
224
224SB
206
206SB
221
207
265
208
230
261
264
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue Satin Black
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Ø100
Ø115
Ø120
Ø125
Ø150
Ø150
Ø175
Ø175
Ø200
Ø200
Ø225
Ø250
Ø275
Ø300
Ø350
Ø400
Ø450
Stainless Steel Flues (600mm lengths)
229
245
252
203
236
219
228
275
257
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Stainless Flue
Ø100
Ø115
Ø125
Ø150
Ø175
Ø200
Ø250
Ø275
Ø300
Galvanised Steel Liners (1200mm lengths)
141
142
162
117
101
6
Galvanised Liner
Galvanised Liner
Galvanised Liner Unswaged
Galvanised Liner
Galvanised Liner
Ø125
Ø150
Ø150
Ø175
Ø200
www.davin.co.nz
138
113
103
156
180
124
107
120
108
167
128
136
165
166
101W
103W
Galvanised Liner
Galvanised Liner
Galvanised Liner
Galvanised Liner Unswaged
Galvanised Slip Liner Unswaged
Galvanised Liner
Galvanised Liner
Galvanised Liner
Galvanised Liner
Galvanised Liner
Galvanised Liner
Galvanised Liner
Galvanised Liner
Galvanised Liner
Galvanised Liner with Brackets
Galvanised Liner with Swage
Ø225
Ø245
Ø250
Ø250
Ø253
Ø275
Ø300
Ø325
Ø350
Ø375
Ø400
Ø450
Ø500
Ø550
Ø200
Ø250
Galvanised Steel Liners (600mm lengths)
100
123
105
153
125
122
130
172
135
Galvanised Liner
Galvanised Liner
Galvanised Liner
Galvanised Slip Liner Unswaged
Galvanised Liner
Galvanised Liner
Galvanised Liner
Galvanised Liner
Galvanised Liner
Ø200
Ø225
Ø250
Ø253
Ø275
Ø300
Ø350
Ø375
Ø400
ADD Cowl
ADD Cowl
ADD Cowl
ADD Cowl
ADD Cowl
ADD Cowl
ADD Cowl
ADD Cowl
ADD Cowl
ADD Cowl
Fixed Cowl
Gas Cowl
Gas Cowl
Gas Cowl
Gas Cowl
H-Top Cowl
H-Top Cowl
Revolving Cowl
Revolving Cowl
Rocket Cowl
Rocket Cowl
Ø115 Stainless Steel (requires flashing cone)
Ø150 Stainless Steel
Ø280 Stainless Steel - (Clamp Type)
Ø125 Stainless Steel - (requires flashing cone)
Ø150 Stainless Steel - (requires flashing cone)
Cowls
500
540
511
508
506
515
513
510
542
554
502
525
578
581
582
583
543
401
402
579
567
Flashing Cones
810
8009
Flashing Cone
Flashing Cone
Ø115/250 Stainless Steel
7
8054
802
861
829
8003
8032
865
8020
8048
854
8049
833
8095
8010
8074
www.davin.co.nz
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Flashing Cone
Cowl, Cone and Top Spider Bracket Sets
541
576
516
577
545
552
548
546
549
547
550
565
571
560
518
519
566
580
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
ADD Cowl & Cone Set
H-Top Cowl & Cone Set
H-Top Cowl & Cone Set
Rocket Cowl & Cone Set
Rocket Cowl & Cone Set
Ø125/250mm
Ø150/200mm
Ø150/250mm
Ø175/275mm
Ø200/250mm
Ø200/300mm
Ø225/325mm
Ø250/300mm
Ø250/350mm
Ø300/350mm
Ø300/400mm
Ø350/400mm
Ø350/450mm
Ø400/500mm
Ø150/250mm
Ø150/300mm
Ø125/225mm
Ø150/250mm
Spider and Spacer Brackets
628
651
696
6100
622
643
664
623
662
671
665
672
654
688
697
675
631
634
8
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Top Spider Bracket
Plain Spacer Bracket
Ø115/200/250 Stainless Steel
www.davin.co.nz
6110
626
699
621
6111
679
659
613
608
669
653
682
670
657
602
604
634
644
650
Standard Spider Bracket
Bottom Spider Bracket
Standard Spider Bracket
Mounting Rails
701
702
703
Mounting Rail
Mounting Rail
Mounting Rail
600 x 40 x 40 Galvanised
Stainless Steel Offsets
806
801
8022
8055
8068
Telescopic Offset Bend
Galvanised Steel Offsets
8114
8063
8067
8065
8069
8073
Ø200 Galvanised Steel
Ø325mm Galvanised Steel
Stainless Steel Fixed Bends – 45°
882
8036
851
8041
8086
8122
Fixed Bend
Fixed Bend
Fixed Bend
Fixed Bend
Fixed Bend
Fixed Bend
Ø100mm
Ø150mm
Ø200mm
Ø250mm
Ø300mm
Ø350mm
Galvanised Fixed Bends – 45°
8028
8094
8052
Fixed Bend
Fixed Bend
Fixed Bend
Ø150mm
Ø200mm
Ø250mm
9
8085
8042
8091
www.davin.co.nz
Fixed Bend
Fixed Bend
Fixed Bend
Ø300mm
Ø350mm
Ø400mm
Offset Bend Kits (comprising of two SS and two galv fixed bends)
8134
8097
8130
8140
8143
8181
Fixed Bend Pairs
Fixed Bend Pairs
Fixed Bend Pairs
Fixed Bend Pairs
Fixed Bend Pairs
Fixed Bend Pairs
Ø150/200mm
Ø200/250mm
Ø250/300mm
Ø250/350mm
Ø300/350mm
Ø300/400mm
Offset Bend Kits (comprising of one SS and one galv telescopic bend)
8058
8071
8070
Telescopic Bend Kit
Telescopic Bend Kit
Telescopic Bend Kit
Ø200/250mm
Ø250/300mm
Ø300/350mm
Extension Kits
8141
8127
8096
8096MB
8045
8059
8046
8037
8044
8047
8062
8100
8050
Flue, Liner & Spacer Bracket
Flue, Liner & Spacer Bracket (black)
Ø100/150mm
Ø150/200mm
Ø150/200/250mm
Ø150/200/250mm
Ø200/250mm
Ø200/300mm
Ø250/300mm
Ø250/350mm
Ø300/350mm
Ø300/400mm
Ø350/400mm
Ø400/450mm
Ø400/500mm
Additional Components
891
884
893
8012
808
820
841
890
816
817
871
825
887
849
8121
10
Aluminium Flexi Flue
Flexi Flue Joiner
Flexi Flue Lower Joiner/Adapter
Flexi Flue Upper Adapter
Tee-Piece
Adjustable Bend
Stove Bright Aerosol Can
Stove Bright Aerosol Can
Starter Ring
Floor Penetration Unit
Floor Penetration Unit
Floor Plate
Chimney Flashing Plate
Chimney Flashing Plate
Energy/Heat Saver Add-On
Ø100mm, 3.6 metres
Ø100mm
Ø100mm
Ø100mm x 400
Ø150mm, 90° (with Cap)
Satin Black
Metallic Black
Ø200/250 (with Stainless Steel Floor Plate)
Ø225/275 (with Stainless Steel Floor Plate)
Ø100, (300 x 400 Overall sizes), Galvanised
Ø250, (300 x 400 Overall sizes), Galvanised
Ø150
www.davin.co.nz
Ceiling Plates
930MB
932MB
900
901
902
902MB
903
903MB
911
904
904MB
905
915
955
Ceiling Plate
Ceiling Plate
Ceiling Plate
Ceiling Plate
Ceiling Plate
Ceiling Plate
Ceiling Plate
Ceiling Plate
Ceiling Plate
Ceiling Plate
Ceiling Plate
Ceiling Plate
Ceiling Plate
Ceiling Plate
250 x 250 (Ø100 Flue) Metallic Black
340 x 340 (Ø100 Flue) Metallic Black
380 x 380 (Ø150 Flue) Powdercoated Matt Black
380 x 380 (Ø150 Flue) Powdercoated White
380 x 380 (Ø150 Flue) Powdercoated White (2 Piece)
380 x 380 (Ø150 Flue) Powdercoated Matt Black (2 Piece)
430 x 430 (Multi Dia) Powdercoated White
430 x 430 (Multi Dia) Powdercoated Matt Black
500 x 430 (Multi Dia) Powdercoated White, 30° Angle
500 x 430 (Multi Dia) Powdercoated White, 45° Angle
500 x 430 (Multi Dia) Powdercoated Black, 45° Angle
Half Shield
Shield Extension
Single Stainless Reflector
Reflector
Deluxe Flue Shield
Back Extension
Single Stainless Reflector
Reflector
Ø250 x 1000 Matt Black
Ø150 x 1200 Stainless Steel
920 Long, Matt Black
Ø175 x 1200 Stainless Steel
Shields
112
182
1006
1001
1002
1004
1013
1019
11
www.davin.co.nz
KITS AND COMPONENTS
12
www.davin.co.nz
KITS
Ø150mm Insert Flue Kit – 4.2m
Revolving Cowl (shown) (2020)
Code
Qty
Description
202
3
Ø150mm x 1200mm Stainless
Steel Flue
203
1
Ø150mm x 600mm
Stainless Steel Flue
602
2
Ø150mm Spider Bracket
402
1
Ø280mm Revolving Cowl
1
Flue Fastener kit
Fixed Cowl (2025)
Code
Qty
Description
202
3
Ø150mm x 1200mm Stainless
Steel Flue
203
1
Ø150mm x 600mm
Stainless Steel Flue
602
2
502
1
Ø150mm Fixed Cowl
1
Flue Fastener kit
13
www.davin.co.nz
Ø150mm Satin Black Stainless Steel Flue Kit 4.2m
Stainless Steel (2075) Satin Black (2074)
14
Code
Qty
Description
202
3
Ø150mm x 1200mm Stainless Steel Flue
203
1
101
1
Ø200mm x 1200mm Galvanised Liner
156
180
602
901
502
1
1
2
1
1
Ø250mm x 1200mm Unswaged Galv Liner
Ø253mm x 1200mm Unswaged Galv Slip Liner
380mm x 380mm White Ceiling Plate
Ø150mm Fixed Cowl
1
Flue Fastener kit
www.davin.co.nz
Ø150mm Stainless Steel Free Standing Flue Kit 3.6m
Stainless Steel (2022) Satin Black (2023)
Code
Qty
Description
202
3
101
1
156
1
153
602
901
502
1
2
1
1
Ø253mm x 600mm Unswaged Galv Slip Liner
Ø150mm Fixed Cowl
1
Flue Fastener kit
Ø150mm Ceiling-Up Kit (2021)
Code
Qty
Description
202
1
203
101
156
180
602
901
502
1
1
1
1
2
1
1
Ø250mm x 1200mm Unswaged Galvanised Liner
Ø253mm x 1200mm Galvanised Slip Liner
Ø150mm Fixed Cowl
1
Flue Fastener kit
Ø175mm Free Standing Flue Kit 4.2m
Satin Black (2017)
Code
Qty
Description
224
3
236
138
1
1
124
2
644
915
577
2
1
1
Ø175mm ADD Cowl with Cone and Spider
1
Flue Fastener kit
15
www.davin.co.nz
COMPONENTS
Galvanised Liners (1xx)
Code
Size
141
Ø125mm x 1200mm
142
Ø150mm x 1200mm
117
Ø175mm x 1200mm
101
Ø200mm x 1200mm
138
Ø225mm x 1200mm
113
Ø245mm x 1200mm
103
Ø250mm x 1200mm
103MB
Ø250mm x 1200mm (black)
156
124
Ø250mm x 1200mm Unswaged
Ø250mm x 1000mm Half Shield
Matt Black
Ø253mm x 1200mm Unswaged
Slip Liner
Ø275mm x 1200mm
107
Ø300mm x 1200mm
120
108
Ø325mm x 1200mm
Ø350mm x 1200mm
167
Ø375mm x 1200mm
128
Ø400mm x 1200mm
136
Ø450mm x 1200mm
165
Ø500mm x 1200mm
166
Ø550mm x 1200mm
Code
Size
100
Ø200mm x 600mm
123
105
Ø225mm x 600mm
Ø250mm x 300mm Shield Ext.
Matt Black
Ø250mm x 600mm
153
Ø253mm x 600mm Slip Liner
125
Ø275mm x 600mm
122
Ø300mm x 600mm
130
Ø350mm x 600mm
172
Ø375mm x 600mm
135
Ø400mm x 600mm
112
180
Galvanised Liner
Half Shield
182
Slip Liner
Shield Extension
16
www.davin.co.nz
Stainless Steel Flues (2xx)
Code
Size
200
Ø100mm
Ø115mm
Ø120mm
Ø125mm
Ø150mm
Ø150mm
Ø175mm
Ø175mm
Ø200mm
Ø200mm
Ø225mm
Ø250mm
Ø275mm
Ø300mm
Ø350mm
Ø400mm
Ø450mm
Ø100mm
Ø115mm
Ø125mm
Ø150mm
Ø175mm
Ø200mm
Ø250mm
Ø275mm
Ø300mm
215
246
201
202
202SB
224
224SB
206
206SB
221
207
265
208
230
261
264
229
245
252
203
236
219
228
275
257
× 1200mm
× 1200mm
× 1200mm
× 1200mm
× 1200mm
× 1200mm Satin Black *
× 1200mm
× 1200mm
× 1200mm
× 1200mm
× 1200mm
× 1200mm
× 1200mm
× 1200mm
× 1200mm
× 600mm
× 600mm
× 600mm
× 600mm
× 600mm
× 600mm
× 600mm
× 600mm
× 600mm
*Details on the use of stainless steel satin black hi-temp flues
1. Stainless Steel Satin Black Hi-Temp Flues must be swept by mechanical means only. (We recommend
mixed head or polypropylene brushes). Under NO circumstances should chemical flue cleaners, (soot
destroyers) or steel chimney brushes be used.
2. Stainless Steel Satin Black Hi-Temp Flues should not be used on a heater burning treated or wet
(unseasoned) wood.
3. Stainless Steel Satin Black Hi-Temp Flue sections should be secured with stainless steel rivets or selftapping screws.
4. The paint finish appearance may change, depending on heater operation and is designed to be a
maintainable finish. To maintain paint finish or touch up use only genuine Stove-Bright Aerosol.
5. Stainless Steel Satin Black Hi-Temp Flues must be installed in accordance with the heater manufacturer
installation instructions. It is the responsibility of the installer to ensure no water leaks into the HiTemp Flue.
17
www.davin.co.nz
Combination Liners (1xx/8212)
101 with
brackets
18
103 with swage
101 with brackets +
103 with swage
assembly
Code
Size
101with brackets
Ø200mm x 1200mm Galvanised Liner with Brackets
103 with swage
Ø250mm x 1200mm Galvanised Liner with Swage
Assembly cross
section view
www.davin.co.nz
Cowls (4xx/502)
401 Cowl
402 Cowl
Revolving Cowls
Fixed Cowls
Code
Size
401
Ø150mm Stainless Steel
402
Clamp Type
Code
Size
502
Cowl, Cone & Top Spider Sets (5xx)
+
+
Code
Size
541
Ø125/250mm ADD Cowl, Cone & Top Spider Bracket
576
516
577
545
552
548
546
549
547
550
565
571
560
566
Ø125/225mm Rocket Cowl, Cone & Top Spider Bracket
580
Ø150/250mm Rocket Cowl, Cone & Top Spider Bracket
19
www.davin.co.nz
“H” Top Cowl and Flashing Cone Set (5xx)
+
Flashing Cone
“H” Top Cowl
Code
Size
518
Ø150mm “H” Top Cowl & Ø150 – 250mm Flashing Cone
519
Ø150mm “H” Top Cowl & Ø150 – 300mm Flashing Cone
ADD Cowls, H-Top Cowls and Flashing Cones (individual items)
(5xx/8xxx)
Anti Down Draught
Cowl (ADD)
Flashing Cone
Code
Size
Size
810
Ø115 – 250mm
Ø125 – 250mm
8054
Ø150 – 200mm
500
Ø100mm Bvent ADD Cowl
including cone
Ø115mm ADD Cowl only
8009
802
Ø150 – 250mm
540
861
Ø150 – 300mm
511
829
Ø175 – 275mm
508
8003
Ø175 – 300mm
506
8032
Ø200 – 250mm
515
865
Ø200 – 300mm
513
8020
Ø225 – 325mm
510
8048
Ø250 – 300mm
542
854
Ø250 – 350mm
554
8049
Ø300 – 350mm
583
Ø150mm “H-Top” Cowl only
833
Ø300 – 400mm
543
Ø200mm “H-Top” Cowl only
8095
Ø350 – 400mm
8010
Ø350 – 450mm
8074
Ø400 – 500mm
Code
525
20
“H” Top Cowl
www.davin.co.nz
Top Spider Brackets (6xx)
Code
Size
628
651
696
646
6100
622
643
664
623
662
671
665
672
654
688
697
675
Ø100/150mm
Ø115/200/250mm
Ø125/175/225mm
Ø125/200/250mm
Ø150/200mm
Ø150/200/250mm
Ø175/225/275mm
Ø200/250mm
Ø200/250/300mm
Ø225/325mm
Ø250/300mm
Ø250/350mm
Ø300/350mm
Ø300/400mm
Ø350/400mm
Ø350/450mm
Ø400/500mm
Top Spider Bracket
Plain Spacer Brackets (6xx)
Code
Size
631
626
699
621
6111
679
659
613
608
669
653
682
670
Ø100/150mm
Ø150/200mm
Ø175/225mm
Ø200/250mm
Ø200/300mm
Ø225/275mm
Ø225/325mm
Ø250/300mm
Ø250/350mm
Ø300/350mm
Ø300/400mm
Ø400/450mm
Ø400/500mm
Bottom Spider Brackets (6xx)
Code
Size
657
602
644
604
650
Ø125/200/250mm Stainless Steel
Ø200/350mm Stainless Steel
Bottom Spacer Bracket
21
www.davin.co.nz
Mounting Rails (7xx)
Code
Size
701
600mm x 40 x 40 Galvanised
702
703
Code
Size
806
801
8022
8055
8068
Code
Size
8114
8063
8067
8065
8069
8073
Code
Size
814
Custom
combo
Ø150/200/250mm
Telescopic Offsets (8xx/8xxx)
Combination Offsets (400mm centres)
22
Ø150/200/250mm (up to 850)
www.davin.co.nz
Tee-Piece (808)
Code
Size
808
90° Ø150mm with cap
Adjustable Bend (820)
Code
Size
820
Fixed Bend – 45 Degree (8xx/8xxx)
Code
Size
8036
851
8041
8086
8122
Code
Size
8028
8094
8052
8085
8042
8091
“Touch Up” Aerosol Cans (8xx)
Code
Size
841
Stove Bright Satin Black
890
Stove Bright Metallic Black
23
www.davin.co.nz
Starter Rings (816)
Code
Size
816
Floor Penetration Units (8xx)
Code
Size
817
Ø200/250mm with Stainless Steel
Floor Plate (not shown)
871
Ø225/275mm with Stainless Steel
Floor Plate (not shown)
825
Ø200/250mm Stainless Steel Floor
Plate to suit 817
Chimney Flashing Plate (849)
Code
Size
849
Ø250mm Galvanised
24
www.davin.co.nz
Energy/Heat Saver Add-On Kit (8121)
Code
Size
8121
Ø150mm
Details on Ø150mm Energy/Heat Saver Add-On Kit
The Energy/Heat Saver add-on uses a thermo-syphon principle where air from either the ceiling cavity or
outside is drawn into the Outer Casing and cools the flue system.
The Energy/Heat Saver add-on minimises room air from being drawn up the Outer Casing and being
wasted.
The Energy/Heat Saver add-on Kit is a basic conversion kit. It is a practical solution, simply add the
Energy/Heat Saver Add-On Kit to any Ø150mm Free Standing Flue Kit.
Note: The Energy/Heat Saver Add-On can only be used on Ø150mm Free Standing Flue Kits, Ceiling Kits or
with components.
25
www.davin.co.nz
Ceiling Plates (9xx)
900
380mm sq, Ø150mm, Matt Black
901
380mm sq, Ø150mm, White
955
915
902
380mm sq, Ø150mm, White, 2 piece
902MB
380mm sq, Ø150mm, Matt Black, 2 piece
903
430mm sq, Multi Dia, White
903MB
430mm sq, Multi Dia, Matt Black
911
500mm x 430mm, Multi Dia, White, 30°
904
500mm x 430mm, Multi Dia, White, 45°
905
26
www.davin.co.nz
Shields/Reflectors (1xx/1xxx)
Half Shield – 112
Reflector - 1006
Reflector - 1013
Reflector - 1001
Reflector - 1019
Deluxe Flue Shield - 1002
Code
Size
112
Ø250mm x 1000mm Half Shield (Matt Black)
182
Ø250mm x 300mm Shield Extension (Matt Black)
1006
Ø150mm x 1200mm Single Shield Reflector (S/S)
1001
Ø150mm x 1200mm Reflector (Matt Black)
1002
Ø150mm x 1200mm Deluxe Flue Shield (Matt Black)
1004
Back Extension for Deluxe Shield (Matt Black)
1013
Ø175mm x 1200mm Single Shield Reflector (S/S)
1019
Ø175mm x 1200mm Reflector (Matt Black)
27
www.davin.co.nz
APPENDICES
28
www.davin.co.nz
APPENDICES
Information Note for Building Inspectors Re: Davin Industries Flue Systems
29
www.davin.co.nz
Thermal Testing Report for #2023 Double Shielded Flue Kit
30
www.davin.co.nz
31
32
www.davin.co.nz
www.davin.co.nz
33
34
www.davin.co.nz
www.davin.co.nz
35
www.davin.co.nz
Safety Opinion Report for #2074 Flue Kit
36
www.davin.co.nz
37
38
www.davin.co.nz

Flues Parts List

Transcription

Similar documents

hiab accessories

Glorie - Thorn

Nikkor Lenses for Large-Format Cameras

WHEEL COLLECTION

PUMA 600 series PUMA 700 series PUMA 800 series

amour - LIGNIS

2005 Louisiana Hurricane Impact Atlas

Gummikontaktrollen - rgl