POLYURETHANE BUSHINGS

POLYURETHANE BUSHINGS
FTS1109
FTS1110
FTS1111
FTS1112
ALIGNMENT CAM KIT
Bushing replacement kits and a complete line of polyurethane
accessories are available.
FTS14
FTS15
FTS1100
TIE RODS
FTS1101
FTS20277
FTS20460
FTS20461
FTS93011
FTS93010
FTS60030
FTS70110
FTS96005
FTS96004
2007-11 GM 1500
2001-10 GM 2500HD/3500 (Inner)
2001-10 GM 2500HD/3500 (Outer)
2006-11 Dodge 1500
2002-05 Dodge 1500
2006-09 Nissan Frontier
2007-11 Toyota Tundra
2005-11 Toyota Tacoma VSC only
2006-09 Toyota FJ
BALL JOINTS
FTS1599-6-1 1999-06 GM C1500
FTS20155
1988-98 GM C1500/2001-10
K2500HD w/Upper Arm (Upper)
FTS30051
1998 Ranger (Upper)
FTS96000
1995.5-04 Toyota 4WD (Upper)
FTS1102
FTS290
FTS292 (99)
1997-03 Ford F-150 2WD/4WD
2004-08 Ford F-150
2005-08 F-250/F-350 4WD
FT532 (100)
1981-96 Ford F-150
FTS92012 (100) 2005-07 Ford F-250/F-350 4WD
Ball Joint Eccentric Cam
FTS543
1983-88 Ford Ranger 2WD
3 1/8 Degree Alignment Cam
FTS291
1998-07 Ford Ranger 2WD
FTS594 (100)
1983-97 Ford Ranger 2WD
1987-08 F-250/F-350 2WD
3 1/8 Degree Alignment Cam
FTS50297
2007-08 Jeep JK Front Kit
FTS94030
Jeep TJ Rear Eccentric Cam Kit
FTS1103
FTS1104
FTS1105
FTS1106
FTS1107
FTS1108
BUMP STOPS
FTS89
FTS50027
ANGLED SPARE TIRE MOUNT
This simple flat mount allows
you to position a tire anywhere
in the bed of your truck. You can
mount the base plate directly
in your bed, for a permanent
mount, or spend a little extra
time placing the mounting plate
underneath your bed, allowing
you to remove your spare tire
without anyone knowing it was
ever there.
Constructed using 1 1/4” steel tubing and MIG welded at the
joints for long lasting strength and durability. The angled spare
tire mount allows you to securely carry a full size spare tire, up
to 35” tall, in the bed of your truck. Installation only requires
drilling four holes to secure one of the cleanest working spare
tire carriers available.
Universal
Universal
204
FTS1125
FTS1129
FTS50085
FTS90109
FTS90110
FTS98011
FTS98012
FTS98013
FTS86
FLAT SPARE TIRE MOUNT
Black Flat Tire Mount
FTS1116
FTS1119
FTS1120
FTS1121
FTS1122
2’’ LIFT SHACKLES - PAIR
FTS3400-111
FTS60235
1 FTT10001BK
SD Spring Bush FTS275/278 (Front)
SD Spring Bush FTS275/278 (Rear)
Bushing & Sleeve Kit For FTS15005/6/8/10/11 Upper Arms
Bushing & Sleeve Kit For FTS1500-10
& FTS1500-11 Lower Arms
Bushing & Sleeve Kit For FTS3000-6
& FTS3200-6 & FTS3100-6 Produced
Before 7/1/99
Bushing & Sleeve Kit For FTS4130-1 &
FTS4130-5
Bushing & Sleeve Kit For FTS4130-2
Bushing & Sleeve Kit For FTS4130-3
Bushing & Sleeve Kit For FTS4130-4-4
& FTS4130-4-6
Bushing & Sleeve Kit For FTS7100-6 &
FTS7200-6
Bushing & Sleeve Kit For FTS97150-6
FTS1113
FTS1114
FTS1115
Bushing & Sleeve Kit For FTSC10-1 &
FTSC10-2 Upper Arms
Bushing & Sleeve Kit For FTSC10-1
& FTSC10-2 Lower Arms
Bushing & Sleeve Kit For FTS7268-10
& FTS7268-11 Upper Arms
Bushing & Sleeve Kit For FTS7268-10
& FTS7268-11 Lower Arms
Bushing & Sleeve Kit For FTS1599-6
Bushing & Sleeve Kit For FTS98100-6
Bushing & Sleeve Kit For FTS3100-6
Produced After 7/1/99
FTS2100K/2200K Bushing Kit Upr/Lwr
Bushing Kit For FTS3400 Kit
Bushing Kit For FTS3420 Kit
Ford F150 LCA Long Travel
2004 Ford F150 Front Lower
Shock Bushing
Lower Bearing Kit For FTS2300K
Lower Bushing Kit For FTS2300K
Jeep YJ Front & Rear
Small Joint Bushing Kit
Large Joint Bushing Kit
2003-11 Dodge 2500 Short Arm
Radius Arm Bushing Kit
Replacement Bushing For FT451
1 FTT10002BK
Black Angled Tire Mount
FTS88
FTS87
FTS50027 (100)
4” Tall Jeep TJ Front or Rear
FTS3400-111 (100) 5” Tall 1994-01 Dodge 4WD
Front
FTS89 (100)
4.5” Tall Universal
FTS86 (100)
2” Tall Universal
FTS87 (100)
1.5” Tall Universal
FTS88 (100)
1” Tall Universal
FTS60235 (100)
5/8” Tall Universal
One of the easiest ways to lift the rear suspension on a mini/
mid size truck is using 2” lift shackles. Our stout 3/8” steel plate
shackles are easily installed, providing the lift and performance
demanded by off roaders.
FTS2094
FTS2092
FTS3092
FTS2096
1983-03 GM S10/S15 Truck
1989-95 Toyota Truck 2WD
1989-95 Toyota Truck 4WD
1995.5-04 Toyota Tacoma 2wd 5 Lug
FOOTNOTE
99.For use w/6” F150 kits, Super Duty Radius Arm or
4 Link kits.
100. Sold Individually.
205
PITMAN ARMS
HEIM JOINTS
Right hand threaded
Teflon Heim ends
are available as
single units for
specialty fabrication.
Dropped pitman arms are necessary in many of our kits, to
correct steering geometry after the installation of a suspension
system. We manufacture our pitman arms to be stronger then
stock units, using the latest forging and CNC
machining technology.
SHOCK SPANNER WRENCH
FTS98006
FTS98008
FTS98005
FTS89905
2.0 Spanner Wrench
2.5 Spanner Wrench
Basic Kit Spanner Wrench
4.0 Spanner Wrench
FTS92011
FTS310
FTS311
FTS309
LIFT BLOCKS & U-BOLTS
U-Bolt #
Looking for a simple and cost effective way to lift the back of
your truck? Fabtech offers U-bolts and Lift Blocks, in a wide
range of sizes, that cover almost every application available.
Universal
Lift Blocks Size Fitment
FTSBK1
1” Rear Lift Blocks
FTSBK15
1.5” Rear Lift Blocks
FTSBK2
2” Rear Lift Blocks
FTSBK3
3” Rear Lift Blocks
FTSBK4
4” Rear Lift Blocks
FTSBK41
4” Rear Block w/Bump Stop
FTSBK5
5” Rear Lift Blocks
FTSBK53
5.5” Flat Rear Lift Blocks
Vehicle Specific
Lift Blocks
FTSBK43
FTSBK10
FTSBK21
FTSBK52
FTSBK22
FTSBK31
FTSBK54
206
Size Fitment
4” 2011 GM 2500HD/3500
1” 2003-04 Dodge 2500/3500 Rear
Lift Blocks
2” 2003-11 Dodge 2500/3500
5” 2004-08 F150 Rear Lift Blocks
(order FTS737 U-bolt kit)
2” 2004-08 F150 Rear Lift Blocks
(order FTS350UBK U-bolt kit)
3” Rear Lift Blocks w/offset pin
5.75” 2005-08 Super Duty Rear Lift
Blocks w/Integrated Bump stop
FTS730
FTS743
FTS725
FTS729
FTS735
FTS722
FTS723
FTS724
FTS734
FTS738
FTS748
FTS351UBK
FTS728
FTS742
FTS744
FTS749
FTS739
FTS751
FTS352UBK
Shape
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Round
Semi
Round
FTS750
Semi
Round
FTS1500UBK-3 Square
FTS3400UBK
Square
FTS350UBK
Square
FTS737
Square
FTS726
Square
FTS3500UBK
Square
FTS752
Square
FTS753
Square
Axle Dia./Length/
Thread Size
2.75” x 6.70” x 1/2”-20
2.75” x 8.70” x 1/2”-20
3.00” x 10.75” x 1/2”-20
3.31” x 7.50” x 1/2”-20
3.56” x 6.00” X 1/2”-20
3.25” x 9.63” x 9/16”-18
3.25” x 10.63” x 9/16”-18
3.25” x 13.38” x 9/16”-18
3.50” x 10.63” x 9/16”-18
4.00” x 12.50” x 9/16”-18
4.00” x 15.00” x 9/16”-18
3.50” x 12.00” x 5/8”-18
3.50” x 16.50” x 5/8”-18
3.50” x 18.00” x 5/8”-18
3.50” x 13.50” x 5/8”-18
3.50” x 20.00” x 5/8”-18
3.75” x 5.35” x 5/8”-18
4.06” x 5.63” X 5/8”-18
3.08” x 11.5” x 9/16”-18
2.99” x 19.20” x 7/8”-14
2.63” x 12.50” x 9/16”-18
2.63” x 14.50” x 9/16”-18
3.00” x 10.50” x 9/16”-18
3.10” x 12.50” x 9/16”-18
2.63” x 14.50” x 5/8”-18
3.00” x 17.50” x 5/8”-18
3.10” x 15.38” x 3/4”-16
3.10” x 17.38” x 3/4”-16
FTS93012
FTS93001
FTS3410
FTS3410
FTS3409
FTS94018
FTS50294
2005-11 Ford F250/F350
1999-04 Ford (After March
Production Date)
1999-04 Ford Super Duty 2WD
1999 Ford (Prior to March
Production Date)
2009-11 Dodge 2500/3500 4WD
2003-08 Dodge 2500/3500 4WD
2000-01 Dodge 1500 4WD
1994-02 Dodge 2500
1994-99 Dodge 1500 4WD
Jeep TJ and YJ
Jeep JK
FTS98000
FTS18
FTS50
FTS92
FTS404-100
FTS43
3/4” Teflon Heim
1 1/4” Teflon Heim
Jam Nut 3/4” Right Hand Thread
Jam Nut 1 1/4” Right Hand Thread
Misalignment for 1 1/4” Heim
Misalignment for 3/4” Heim
END LINKS
FTS1126
FTS1127
FTS1128
FTS93009
FTS95003
FTS91001
Sway Bar Endlink Bush Kit w/BLT
Sway Bar Endlink Complete
Sway Bar Bushing Replacement
Sway Bar Links
2004-09 Nissan Titan Sway Bar kit
Sway Bar End Link Kit
1 1/2’’ ADD-A-LEAFS
Smooth RIde Add-A-Leafs
FTS309
FTS310
FTS311
Pitman Arm Conversion Chart
Most add a leafs are known for being stiff and hard to install.
Well not anymore. We have taken modern thin leaf technology
and incorporated it in our smooth ride add a leaf kits, allowing for
a effortless installation and the smoothest possible ride.
FTS200
Mini Truck Universal
FTS202
GM S10/S15 Rear
FTS206
GM C1500 1988-98 Rear
FTS212
GM 1999-10 Rear
FTS214
Ford F150 1997-03 2WD
FTS216
Ford F250/350 2008 Rear
FTS208
Ford Super Duty 4WD Rear
36
FTS207
Dodge 1500 Ram 4WD Rear
36
FTS215
Dodge 1500 2002-05
FTS209
Dodge 2500 1994-02 4WD Rear
FTS203
Dodge Dakota
FTS205
Toyota Tacoma Rear
FTS213
Jeep XJ
Fabtech #
1999-04 Ford #
Spline Count
FTS309
F81A-3590-LC
32
FTS309
F81A-3590 BA
32
FTS309
F81Z-3590 LB
32
FTS310
YC3Z-3590 CA
36
FTS311
YC3Z-3590 DA
36
FTS311
YC35-3590 DB
FTS311
YC34-3590 DA
207
WARRANTY AND WARNINGS
Fabtech provides a Limited Lifetime Warranty to the original retail purchaser who owns the vehicle, on which the product was originally installed, for defects in workmanship and materials.
The Limited Lifetime Warranty excludes the following Fabtech items; bushings, bump stops, ball joints, tie rod ends, limiting straps, cross shafts, heim joints and driveshafts. These parts are subject to wear and are
not considered defective when worn. They are warranted for 60 days from the date of purchase for defects in workmanship.
DESERT GUARDS
Dirt Logic and Performance Coilover take apart shocks are considered a serviceable shock with a one year warranty on leakage only. Service seal kits are available separately for future maintenance. All other shocks
Universal Guards are constructed of 1 1/2” diameter tubing and
have provisions for mounting two 6” round auxiliary lights. Will
not fit vehicles with body lifts. Lights not included.
Universal
1 FTT10020BK
Mini/Mid Universal
SHOCK BOOTS
Urethane boots
provide additional
protection to
exposed shock
absorber shafts
against flying rocks, dirt and
mud while enhancing the
appearance of your suspension.
Shock boots will only fit Performance Shocks. Boots are
individually packaged.
FTS7000R
FTS7000B
FTS7000G
208
Red
Blue
Gray
FTS7000BK
FTS7000Y
EXTENDED BRAKE LINES
are covered under our Limited Lifetime Warranty.
Because some suspension systems require longer brake
lines, we have designed factory replacements, using the
highest quality braided stainless steel lines. All of our extended
brake line kits meet DOT specifications.
coating, plating and/or welding will void all warranties. Some finish damage may occur to parts during shipping, which is considered normal and is not covered under warranty.
Fabtech does not warrant any product for finish, alterations, modifications and/or installation contrary to Fabtech’s instructions. Alterations to the finish of the parts including but not limited to painting, powder
Fabtech products are not designed nor intended to be installed on vehicles used in race applications or for racing purposes or for similar activities. (A “RACE” is defined as any contest between two or more vehicles,
or any contest of one or more vehicle against the clock, whether or not such contest is for a prize). This warranty does not include coverage for police or taxi vehicles, race vehicles, or vehicles used for government
or commercial purposes. Also excluded from this warranty are sales outside of the United States of America.
Installation of most suspension products will raise the center of gravity of the vehicle and will cause the vehicle to handle differently than stock. It may increase the vehicle’s susceptibility to a rollover, on road and
FTS91005 2001-06 GM 2500HD (Front)
FTS91006 2007-08 GM2500HD (Front)
FTS7268-9 1983-99 GM S10 2WD
w/3” Lift Spindles
FTS1500-9 1988-98 GM C/K1500 2WD/4WD
FTS92007 2005-07 Ford Super Duty 4WD (Front)
FTS94055 2007-08 Jeep JK (Front & Rear)
FTS94017 1997-05 Jeep TJ (Front & Rear)
off road, at all speeds. Extreme care should be taken to operate the vehicle safely at all times to prevent rollover or loss of control resulting in serious injury or death. Fabtech front end Desert Guards may impair the
deployment or operation of vehicles equipped with supplemental restraining systems/air bag systems and should not be installed if the vehicle is equipped as so.
Fabtech makes every effort to ensure suspension product compatibility with all vehicles listed in the catalog, but due to unknown auto manufacturer’s production changes and/or inconstancies by the auto manufacturer, Fabtech cannot be responsible for 100% compatibility, including the fitment of tire and wheel sizes listed. The tire and wheel sizes listed in Fabtech’s catalog are only a guideline for street driving with noted
fender trimming. Fabtech is not responsible for damages to the vehicle’s body or tires. Fabtech is not responsible for premature wear of factory components due to the installation of oversized tires and wheels.
Fabtech’s obligation under this warranty is limited to the repair or replacement, at Fabtech option, of the defective product only. All costs of removal, installation or re-installation, freight charges, incidental or
consequential damages are expressly excluded from this warranty. Fabtech is not responsible for damages and/or warranty of other vehicle parts related or non related to the installed Fabtech product. This warranty
is expressly in lieu of all other warranties expressed or implied. This warranty shall not apply to any product that has been subject to accident, negligence, alteration, abuse or misuse as determined by Fabtech.
Fabtech suspension components must be installed as a complete system including shocks as shown in our current catalog. All warranties will become void if Fabtech parts are combined and/or substituted with
other aftermarket suspension products. Combination and/or substitution of other aftermarket suspension parts may cause premature wear and/or product failure resulting in an accident causing injury or death.
Fabtech does not warrant products not manufactured by Fabtech.
Depending on the condition of the factory suspension components retained after the installation of a Fabtech suspension not all vehicles may have the same ride stance front to rear as described in the catalog. The
blue color of suspension components shown in all Fabtech photographs are for display purposes only. Majority of all Fabtech components will be black specifically where noted with part numbers ending in BK.
MISCELLANEOUS
Black
Yellow
FTS92003 1997-08 Ford F150 Driveline Spacer
FTS24092 JK Track Bar Bracket Gusset Kit
FTS21064 2007 K1500 Suburban
Rear Coil Spacers
FTS92025 F250/350/Excursion
Trac Bar Bracket
Installation of Fabtech product may void the vehicles factory warranty; it is the consumer’s responsibility to check with their local vehicle’s dealer for warranty disposition before the installation of the product.
Some state laws may prohibit modification of suspension to a vehicle in whole or in part. It is the responsibility of the installer and consumer to consult local laws prior to the installation of any Fabtech suspension
product to comply with such written laws.
It is the responsibility of the distributor and/or the retailer to review all warranties and warnings of Fabtech products with the consumer prior to purchase.
Fabtech reserves the right to supersede, discontinue, change the design, finish, part number and/or application of parts when deemed necessary without written notice. Fabtech is not responsible for misprints or
typographical errors within the catalog, price sheet or website.
Some images and situations portrayed in this book are not real and are intended for entertainment purposes only.
No animals were harmed in the production of this book.
For complete warranty & warnings go to www.fabtechmotorsports.com
FABTECH
BUILT TO ENDURE
TOLL
FREE
877-4-FABTECH
877-432-2832
PHONE 909.597.7800 FAX 909.597.7185
4331 EUCALYPTUS AVE. CHINO, CA. 91710
ON THE WEB ATWWW.FABTECHMOTORSPORTS.COM
E-MAIL US ATINFO@FABTECHMOTORSPORTS.COM
CAT #FTC2011