Click here to your Project Guide

Transcription

Love Ya…No Idea!
by Allison Cope
Stamps: Stamp of Approval
August 2015 Box (Girlfriend, In
Bloom: Eva’s Favorite Flowers)
Inks: Memento (Tuxedo Black,
Angel Pink, Bahama Blue*),
Papertrey Ink – Dye Ink (Aqua Mist,
Hawaiian Shores), Stampin’ Up!
(Cameo Coral)
Paper: Recollections White &
Black Cardstock
Accessories: Stamp of Approval
August 2015 Kit (Love Ya Fri-Die,
Friendly Flowers Fri-Dies, Tag
Buddies Dies), Masking Paper
1. Trim a piece of black cardstock at 4 ¼” x 11”. Score at 5 ½” and fold to create a top
folding card.
2. Trim a piece of white cardstock at 4” x 5 ¼”.
3. Die cut a large tag from masking paper and after removing the mask backing, center it
within the white panel.
4. Using a variety of shades of ink, stamp flowers and leaves over the edge of the mask.
*Note: Blue ink was stamped off first to create a lighter shade of ink.
5. Remove the mask.
6. Die cut the “love ya” sentiment twice from black cardstock. Glue both layers together
to create a more dimensional greeting.
7. Die cut some Friendly Flowers from white cardstock. Ink up the die cuts using the
same inks used to stamp the flowers. Stamp the flower centers if desired.
8. Adhere the “love ya” greeting to the tag shaped white void.
9. Stamp the remaining greeting using black ink and adhere the floral die cuts using
foam adhesive.
Best Friend
by Kristie Goulet
Ink: Festive Berries, Spiced
Marmalade, Squeezed
Lemonade, Mowed Lawn
Peacock Feathers, Seedless
Preserves Distress inks,
Versafine Black
Paper: Black, White
Accessories: Stamp of
Approval stencil, Translucent
embossing paste, glossy
accents, black fun foam
1. Sponge distress inks in a rainbow order across a piece of 5 1/4 X 4 white card stock.
2. Place Pattern of the Rings Creative Screening over the inked piece. Secure stencil and
inked piece using washi tape. Apply translucent embossing paste over entire piece, remove
stencil and let dry.
3. Cut the Friend Fri-Die out of black fun foam. Heat using heat gun to shrink down to
smaller size. Temporarily place Friend Fri-Die onto a piece of 3 1/2 X 2 1/4 white card stock,
stamp flowers around the sentiment. Stamp "you are my best" using versafine black ink. Use
liquid glue to adhere Friend Fri-Die. Mat stamped piece onto black card stock.
4. Layer inked and embossed piece onto black card stock leaving 1/8" border. Layer that
onto a white 5 1/2 X 4 1/4 top folding card. Add sentiment panel using sticky strip to the
center of the inked and embossed piece. Apply glossy accents to centers of flowers. Allow
to dry.
CAS Best Friend
by Isha Gupta
Stamp: Stamp of Approval
Ink: Fairy Dust (WPlus9);
Kaleidacolor, VersaFine Onyx Black
(Imagine Crafts/ Tsukineko)
Paper: White (Neenah)
Accessories: Sequins (Pretty Pink
Posh), Shape n Tape (Lifestyle
Crafts)
1.
Stamp the word friend multiple times on the white layer.
2. Stamp the flowers and sentiment.
3. Cut and adhere a stripe of tape onto the card base.
4. To finish your design, embellish with sequins.
Stenciled Tag
by Laurel Beard
Ink: Onyx Black Ink (Tsukineko)
Paper: Neenah Solar White
110lb
Accessories: Stencil, Sequins &
Die (Stamp of Approval) Tim
Holtz Distress Spray Stain
(Cracked Pistachio, Picked
Raspberry), Vagabond, Double
Sided foam Tape (Scotch), Multi
Matte Medium (Ranger), Twine
(Lawn Fawn), Corner Rounder
(We R Memory Keepers)
1. Trim white card base to 4.25.5.5 and score to make top folding card and set aside
2. Layer the Pattern of the Rings stencil over the top of another piece of white cardstock and spray Tim
Holtz Distress Spray Stain from about 12 inches above in the colors Cracked Pistachio and Seedless
Preserves and set aside to dry.
3. Using the direct to paper technique, apply the ink pad direct to a piece of white cardstock with
Cracked Pistachio distress ink. This ensure a perfect match of color since we used the same color in the
spray stain format. Secure the friend die over the top with some washi/surgical tape (I do this so my
die doesn’t shift around in the machine) and run thru the die cutting machine
4. Once the stenciled panel is dry, take the two largest tag dies from the Tag Buddies and layer them
right on top of the stenciled panel and run it thru your die cutting machine. Doing this will provide you
a tag frame, rather than a solid tag.
5. Add double sided foam dimension on the back of the tag die cut panel and place on the white card
base at an angle.
6. Stamp sentiment from the Girlfriend stamp set in black ink.
7. Secure friend die over the top of the tag panel with Multi Matte Medium, tie with twine and round
corners.
Hey Friend
by Laura Sterkx
Paper: Neenah White, Canson
Watercolor Paper, DoCrafts
Glitter Paper, Lifestyle Crafts
Shape 'n Tape Black
Ink: Memento Tuxedo Black,
Mustard Seed, Picked
Raspberry, Spun Sugar, Dried
Marigold Distress Ink
Accessories: Stamp of
Approval
1.
Cut a standard size card out of white card stock.
2. Add lots of water and Distress Ink to watercolor paper. Let dry.
3. Die cut flowers out of watercolored paper.
4. Die cut small details of the flowers out of glitter paper.
5. Press Versamark ink pad to white card stock and sprinkle embossing powder on it.
6. Heat set the embossing powder and die cut the word friend out of it.
7. Assemble the card together by adhering striped washi tape, a strip of glitter, the flowers
and friend die cut.
8. Stamp "hey" on the card using black ink.
*View the video on how this card was made here.
No Matter What
by Maureen Merritt
Ink: Picked Raspberry, Mustard
Seed, Peacock Feathers Distress
Inks (Ranger) Versamark
(Tsukineko)
Paper: Whisper White (Stampin’
Up) Black (WPlus9 Design
Studio)
Accessories: Dies & Sequins
(Stamp of Approval) Glossy
Accents, White Embossing
Powder (Ranger)
1.
Cut a piece of white card stock to 3 x 5 1/2 inches.
2. Next rub and anti-static tool over the entire piece. Stamp the Curtis background stamp in
Versamark ink, cover with white embossing powder and heat set.
3. Using a blending tool, sponge distress inks over the embossed background. Start with
Picked Raspberry, then move to Mustard Seed and finally Peacock Feathers. Blend the colors
together to create even more variation in color.
4. Die cut “Friend” from black card stock. Cover with Glossy Accents and set aside until
completely dry.
5. Emboss the sentiment on black card stock with white embossing powder and then trim
down to size.
6. Trim a 1/8 x 5 1/2 inch and a 1/4 x 5 1/2 inch piece of black card stock. Add the stamped
background piece with foam tape and then add the die cut pieces and finishing touches.
You Make Me Happy
by Kristie Goulet
Ink: New Leaf, Hawaiian Shores,
Orange Zest, Raspberry Fizz
(Papertrey Ink), Versafine black,
Black Staz-on
Paper: White, Black, Vellum
Accessories: Stencil (Stamp of
Approval) Copic Multiliner 0.3
1. Create a top folding card base measuring 4 1/4″ x 11″ using black card stock.
2. Cut a mat layer using white card stock measuring 4" X 5 1/4".
3. Place Pattern of the Rings Creative Screening over the
white card stock, securing with washi tape or post it tape.
Stamp inside each ring using the small cluster of dots from
the In Bloom stamp set. Place a dot inside each diamond
using a Copic Multiliner or a black marker.
4. Stamp flowers & leaves across top of stamped paper. Then tamp sentiment onto strip of
vellum. Wrap around white stamped piece, secure with tape. Adhere dimensional adhesive
or fun foam to back and layer onto black card base.
Gold Foil Friend
by Isha Gupta
Ink: Kaleidacolor, VersaFine Onyx
Black, StazOn Black (Imagine
Crafts/ Tsukineko)
Paper: White, Black (Neenah);
Gold Foil (DCWV)
Accessories: Stamp of Approval
Dies; Twine
1.
Die cut the tag from vellum.
2. Cut a white mat layer and stamp the florals randomly on the background.
3. Die cut the word “friend”.
4. Stamp the sentiment on the tag and adhere it to the die cut word.
5. Adhere the tag onto the mat layer using 3D foam.
6. Assemble your card.
Love Ya
by Laurel Beard
Ink: Onyx Black Ink, Versamark
(Tsukineko),
Paper: Neenah Solar White
110lb, Charcoal (Wplus9)
Accessories: Dies (Stamp of
Approval) Copics, Zing
Embossing Powders, Clear
Embossing Powder (Hero
Arts)Black Texture Spray
(Tsukineko), Heat Tool, Clear
Wink of Stella, Multi Matte
Medium (Ranger)
1. Trim charcoal card base to 4.25.5.5 and score to make top folding card and set aside.
2. Trim a piece of white cardstock to 4.5.25.. Stamp the Love Ya from the Girlfriend stamp set
in Versamark ink and sprinkle on various colors of embossing powders (I used Zing
embossing powders). Heat set with your heat tool.
3. Stamp the rest of the sentiment in Black onyx black ink, sprinkle with clear embossing
powder and heat set.
4. On a piece of scratch paper, color some strips with coordinating colored copic markers. 5. Place the circle dies from the Tag Buddies die set and die cut various circles to create faux
enamel dots.
6. Apply a coating of Clear Wink of Stella glitter pen over the circle cuts and adhere them to
your card. Add finishing touches and flicks of Texture Spray.
You Make Me So Happy
by Laura Sterckx
Stamps: (Stamp of Approval)
Ink: Tuxedo Black (Memento)
Versamark (Tsukineko) Bubblegum,
Orange Soda, Tide Pool (Hero Arts)
Duckling Ink (Simon Says Stamp)
Paper: Solar White (Neenah) Glitter
Paper (DoCrafts) Shape ’n Tape
(Lifestyle Crafts)
Accessories: Dies (Stamp of Approval)
WOW! Florida Sunset & Daytona
Sands Embossing Powder, Fun Foam.
1) Cut a piece of white card stock to 5,5" by 3, 3/4".
2) Stamp flowers in black.
3) Add color to the flowers by stamping solid images on top of the black flowers using
bright colors.
4) Press Versamark ink pad to white card stock and sprinkle embossing powder on it.
5) Heat set the embossing powder and die cut the word friend out of it. 6) Die cut the word again out of white Fun Foam.
7) Adhere the word cut out of Fun Foam to the back of the glitter word.
8) Stamp a sentiment.
9) Assemble the card together by adhering washi tape, a strip of glitter paper and the friend
die cut.
Monochromatic Happy
by Maureen Merritt
Ink: Sweet Nectar, Miami Spice,
Flamingo (WPlus9 Design Studio)
Versamark (Tsukineko)
Paper: Whisper White (Stampin’ Up)
Black (WPlus9 Design Studio)
Accessories: Sequins (Stamp of
Approval) White Embossing Powder
(Ranger)
1.
Trim a piece of white card stock to 4 x 5 1/4. Stamp the background with florals in
shades of the same color.
2. Next stamp the leaves and detail pieces on the flowers.
3. Heat emboss the sentiment on a a 3/8 x 4 1/4 inches strip of back card stock.
4. Adhere the stamped layer with foam tape and embellish with sequins.
Love Ya
by Heather North
Ink: Versamark, Cracked Pistachio
(Distress); Bermuda Bay, Pool Party,
Cucumber Crush (Stampin' Up!)
Paper: Basic Black, Whisper White
(Stampin' Up!)
Accessories: Black & White Twine
(Doodlebug); Stencil & Die (Stamp of
Approval); Translucent Embossing
Paste (Wendy Vecchi); White
Embossing Powder (Stampin' Up!)
1. Sponge ink onto card stock in a random pattern.
2. Cover the embossed piece with the Pattern of the Rings Stencil.
*Use painter's tape, a sticky note, or washi tape to temporarily adhere your stencil down.
3. Lightly cover the surface with translucent embossing paste, then peel off stencil and set
aside to dry.
*Wash your stencil and tools immediately to avoid having paste dry on them.
4. Emboss the sentiment "no matter what" onto the bottom of a 1 1/4" black strip of card
stock.
5. Die cut "love ya" sentiment with the same color card stock.
5. Once your embossing paste is dry, adhere it to the cardstock.
6. Wrap baker's twine around the bottom and tie it in a bow.
So Happy
by Allison Cope
Inks: Angel Pink, Cantaloupe, Olive
Grove, Tangelo (Memento) Autumn
Rose, Raspberry Fizz (Papertrey Ink)
Paper: Neenah Solar White Card
stock
Approval) Envelope Punch Board
(We R Memory Keepers)
1.
Trim a piece of white card stock to 4 1/4 x 11. Score at 5 1/2 and fold to create a top
folding card.
2. Round the bottom corners.
3. Mask off the top, on an angle, using Post-It Notes.
4. Stamp the flowers and leaves using colorful inks. To achieve a lighter ink, stamp the
image twice without reinking.
5. Remove the masks and stamp the greeting.
6. Adhere the heart sequins to the center of the large flowers.
Love Ya Girlfriend
by Heather North
Ink: Daffodil Delight, Pool Party,
Pumpkin Pie, Melon Mambo (Stampin'
Up); Tuxedo Black (Memento)
Paper: Bermuda Bay, Whisper White
Thick (Stampin' Up!)
Accessories: Die (Stamp of Approval)
1. Stamp flowers in the bottom left corner of the card in a "triangle" shape.
2. Adhere the die cut sentiment to the bottom right of the card leaving space for your
stamped sentiment.
3. Stamp the sentiment.
* Embellish with sequins or die cut flowers to add a bit more detail to this CAS design.
Hey There Friend
By Jessica Frost-Ballas
Stamps: Box of Approval
Ink: Versamark
Paper: Black Card
stock, Neenah Solar White Cardstock,
Vellum, Pink Glitter Paper
Accessories: Powder Tool, Silver
Embossing Powder, Clear Embossing
Powder, Copic Markers in RV04, RV06,
RV09, BigShot, Milwaukee Heat Tool,
ATG Gun, Vellum Tape, Foam
Mounting Tape
1. Prep a scrap piece of vellum with your powder tool. Stamp the flowers from Winnie & Walter’s
In Bloom: Eva’s Favorite Flowers onto the vellum with versamark and then heat-emboss them
with silver embossing powder. Turn the vellum over and color the outlined flowers with copic
markers. Leave the solid flowers as is. Fussy cut each flower and set aside.
2. Prep a 3.75” by 5.5” piece of black cardstock with your powder tool. Ink Catherine’s
Background stamp from CAS-ual Fridays Stamps with versamark and then press the black
cardstock onto the stamp. Carefully pull up the black cardstock and heat-emboss it with clear
embossing powder.
3. Cut a piece of white cardstock to a standard A2 size (4.25” by 5.5”) and color the sides of the
paper with the darkest copic marker (RV09).
4. Die-cut the word ‘friend’ from CAS-ual Fridays Stamps Girlfriend die-set from pink glitter paper.
5. Cut a strip of vellum to 1.5” by 5.5” and prep with a powder tool. Stamp the words ‘hey there’
from the CAS-ual Fridays Stamps set with versamark and then heat-emboss with silver
embossing powder.
6. To assemble the card, adhere the black background to the pink panel with an ATG gun. Next
use vellum tape to adhere the strip of vellum to the black background.
7. Arrange the flowers and adhere the solid embossed flowers with an ATG gun and the colored
outline flowers with foam mounting tape. Use the ATG gun to adhere the die-cut word above
the flowers. Finally, mount the finished pink panel to a white or black card base!
Watercolored &
Stenciled
by Jessica Frost-Ballas
Inks: Versafine Onyx Black
Paper: Tim Holtz Watercolor
Paper, Black Cardstock
Approval), Ken Oliver Color
Burst Powders in Pthalo Green,
Ultramarine Blue, Violet,
Winnie & Walter Pattern of the Rings stencil, Post-it Tape, Spritz Bottle filled with water, Clear
Embossing Powder, Powder Tool, Milwaukee Heat Gun, ATG Gun, Craft Sheet, Ranger MultiMedium Matte
1. Tape a piece of watercolor paper to the craft sheet with post-it or washi tape. Offset
the stencil and tape it over the watercolor paper to secure it.
2. Lightly puff some of the Color Burst powder onto the paper in whatever design you
want. A little goes A LONG way
3. Carefully spritz water onto the powder…it will spread quickly. For variation in color
use a paper towel to dab off excess water then do a second spray and let that sit. The
powders will blend together and create new colors!
4. Let it dry completely before removing the stencil. Trim the watercolor panel to 4” by
5.25”.
5. Prep the watercolor paper with a powder tool and stamp the sentiment from CAS-ual
Fridays Stamps with versafine. Emboss the sentiment with clear embossing powder.
6. Mount the watercolor panel to a cardbase of black cardstock. To finish the card add a
sprinkling of sequins, adhering them with Ranger multi-medium matte!
Clean & Simple Love Ya
by Catherine Pooler
Ink: Bahama Blue, Lilac Posies,
Black (Memento) Butter Bar (Hero
Arts)
Card stock: Marshmallow (Bazzill)
1. Cut card stock to 11 x 4-1/4 and 5 x 3-3/4.
2. Stamp greeting, then flower images on card stock. 3. Ink stamp in Butter Bar, then stamp off on scratch paper to get a lighter shade, then stamp
the next image on top of it without stamping off.
4. Adhere stamped piece to card base with dimensional adhesive.
*Stamp of Approval Exclusive Project
Black & White Love Ya,
Girlfriend
by Catherine Pooler
Ink: Black, Bahama Blue,
Rosebud (Memento)
Paper: Marshmallow (Bazzill),
Black
1. Cut card stock to 11 x 4-1/4, 5-1/2 x 3-7/8 and 5-1/2 x 3-1/2, Cardstock for “love ya”
sentiment is 4-1/4 x 2-5/8.
2. Stamp Background on white card stock, layer with black and adhere to white card stock
base.
3. Stamp greeting and flower images on layer and adhere to card with dimensional adhesive.
Offset Inlaid Friend
by Catherine Pooler
Ink: Butter Bar, Tide Pool,
Orange Soda (Hero Arts) Pear
Tart, Black, Rosebud
(Memento)
Paper: Marshmallow (Bazzill)
Black
Accessories: Die (Stamp of
Approval)
1. Cut card stock to 5-1/2 x 8-1/2, 5-3/8 x 4-1/8 and 5-1/4 x 4.
2. Stamp various images on white card stock.
3. Cut “friend” out of stamped piece.
4. Adhere white later to black card stock.
5. Add liquid glue to “friend” die and offset it to show a bit of the black card stock from
behind.
6. Assemble the rest of the card!
Sponged Love Ya
by Catherine Pooler
Ink: Peeled Paint, Peacock
Feathers (Distress Ink), Memento
Black
Black
Accessories: Stencil & Sequins
(Stamp of Approval) Ink Blending
Tool and Sponges
1. Cut card stock to 4-1/4 x 11, 4 x 5-1/2 , 3-3/4 x 5.
2. Using the Pattern of the Rings stencil, sponge Peeled Paint on card stock making it darker
in the upper left hand corner and fading to a very light shade.
3. Start in the opposite corner with Peacock Feathers and blend to a smooth transition
between colors.
4. Stamp greeting, add sequins and assemble.
My Best Friend
by Jessica Frost-Ballas
Ink: Hero Arts Unicorn White
Pigment Ink, Versamark, Tsukineko
Delicata Pigment Ink in Golden
Glitz, and Memento Brilliance
Pigment Ink in Pearlescent Poppy,
Pearlescent Coral, Rocket Red
Gold, and Pearlescent Jade
Paper: Vellum, Neenah Desert
Storm Cardstock
Accessories: Tag die (Stamp of
Approval), Natural and Gold Twine,
Metallic Gold Thread, Milwaukee
Heat Gun, Gold Embossing
Powder, Big Shot, Powder Tool,
Craft Knife, Post-it Tape, Ranger Multi-Medium Matte
1. Die-cut the largest tag from the Stamp of Approval collection from vellum and prep it with a
powder tool. Stamp the sentiment from CAS-ual Fridays Stamps Girlfriend set with Versamark
and heat-emboss it with gold embossing powder.
2. Take a 4.25” by 11” card base of Neenah Desert Storm cardstock and score it at 5.5.” Cut a tiny
slit at the score line about a half an inch from the left edge. Use post-it tape to adhere the card
to your work surface and mask off the back of the card so that you can stamp the flowers over
the edge of the card without inking up what will become the back of your card.
3. Stamp the solid flowers from the Winnie & Walter In Bloom: Eva’s Favorite Flowers stamp set
across the panel with white pigment ink. Heat set it with the heat gun so the pigment ink won’t
smudge.
4. Next, stamp the larger outline flowers with the colored pigment inks. Stamp the entire card
base with larger flowers and then fill in the empty spaces with the smaller flowers, leaves and
accents. Don’t worry if the stamps overlap. Heat-set the colored inks or let it dry overnight.
5. Put a couple of dots of Ranger multi-medium matte on the back of the vellum tag where they
will be hidden by the embossed word then place the tag onto the card.
6. Thread the twine and metallic thread through the slit in the top of the card and tie it around the
opening in the tag. Arrange the bow and then cut the ends of the strings so they’re even.
You’re My Sistah
by Heather North
Ink: Melon Mambo, Pumpkin
Pie, Daffodil Delight (Stampin'
Up!); Tuxedo Black (Memento);
Tide Pool, Soft Purple (Hero
Arts Shadow Inks)
Paper: Whisper White Thick
(Stampin' Up!)
Approval)
1.
Use a post it note to mask off 2/3 of an inch of the card base.
2. Stamp the solid image flowers randomly on the left 1/3 of the card. Start with largest
flowers and work down to smaller images.
3. Stamp the line images in black over the solid flowers.
4. Peel off masking tape and add a sentiment and sequins.
You Have No Idea
by Kristie Goulet
Ink: Memento Tuxedo black
Paper: White, Black
Approval) YR68, Y19, BG05, B02
Copics
1. Create a top folding card base.
2. Cut another piece of white card stock 3 1/2" by 5 1/4". Using your MISTI or Stamp-a-majig, stamp the first open leaf image in the upright position. Stamp the next leaf image to the
right of the previous stamped image so the bottom right petal and the bottom left petal that
you are stamping are overlapping. Continue stamping image until medallion is formed,
making sure to overlap the bottom petal. Stamp the swirl in each corner of the medallion.
Color the image with Copics, using YR68 & Y19 on the petals that overlap in the center. Color
the rest of the petals with BG05 & B02.
3. Using a scrap piece of black card stock cut out the Friend sentiment using the Friend FriDie. Attach this to the bottom portion of your stamped panel. Stamp the rest of the
sentiment from the Girlfriend stamp set under the die cut.
4. Cut a piece of black card stock 3 3/4" by 5 1/4" to mat behind stamped piece. Attach to
top folding card base. Attach a sequin to the center of the medallion to finish off your card.
Hey There Friend
by Catherine Pooler
Versamark
Paper: Watercolor paper
(Canson) Marshmallow (Bazzill)
Black
Accessories: Zig Clean Color
Markers (Kuretake) White
Embossing Powder (WOW)
Sequins (Stamp of Approval)
1.
Cut a piece of watercolor paper to 4 x 5 1/4 inches.
2. Stamp the sentiment on an angle in black ink.
3. Stamp the flowers in Versamark ink and then heat emboss with white embossing powder.
Fill in with the smaller image stamped in black.
4. Color over each flower with Zig Clean Color Markers and then spritz with water.
5. Let dry and then layer over a 4 1/8 x 5 3/8 inch piece of black card stock and adhere to a
white card base.
6. Embellish with sequins.
Watercolored Love Ya
by Catherine Pooler
Versamark
Paper: Watercolor paper (Canson)
Marshmallow (Bazzill) Black
Accessories: Sequins & Die
(Stamp of Approval) Zig Clean
Color Markers (Kuretake) White
Embossing Powder (WOW)
1. Cut watercolor paper to 3 1/4 x 4 1/2 inches. Stamp the flowers with Versamark ink and
heat emboss with white embossing powder.
2. Color over each flower with Zig Clean Color Markers and spritz with water. Set aside to
dry.
3. Stamp “no matter what” repeatedly on white card stock and then die cut the “love ya” die
from the stamped piece. Die cut the “love ya” again from black card stock and layer the two,
slightly offsetting them.
4. Once dry, place the watercolored piece on a 3 3/8 x 4 5/8 inches piece of black card stock,
then adhere it to a white card base.
5. Adhere the die cuts and stamp the greeting in black ink.
Shaker Card
by Laura Sterkx
Ink: Tumbled Glass,
Cracked Pistachio,
Peacock Feathers Distress
Inks (Ranger)
Paper: Neenah Solar
White 110 LB., DoCrafts
Glitter Paper
Accessories: Stencil, Die
and Sequins (Stamp of
Approval)
1. Blend the pattern from the stencil on white paper using three colors of Distress Ink. 2. Cut that piece to 4" by 5 1/4" and die cut the flowers out of the paper. Adhere acetate on
the back so that it covers the flowers. 3. Grab a piece of Fun Foam and cut three circles in it so that it matches the flowers.
These circles don't have to be perfect since you won't be able to see the backside. 4. Adhere the Fun Foam Frame to a standard size card and sprinkle sequins into the circles. 5. Adhere the main piece of the card to the Fun Foam using strong adhesive. 6. The shaker piece is finished! Now die cut the friend greeting out of blue glitter paper.
Adhere that to the card. 7. Die cut the tiny elements of the flower set out of white glitter paper and adhere it onto the
acetate. Distressed
Background
by Laurel Beard
Ink: Cracked Pistachio,
Evergreen Bough, Pine
Needles Distress Ink (Ranger)
Onyx Black (Tsukineko)
Paper: Neenah Solar White,
Black (Wplus9)
Accessories: Friend die, Die
Cutting Machine, Black
Texture Spray (Tsukineko)
1. Ink background stamp with Versamark ink, sprinkle on white embossing powder and heat
set onto a panel trimmed to 4x5.5
2. Blend in distress inks (Cracked Pistachio, Iced Spruce) to create an ombre colored
background.
3. Iron off embossing powder by placing card panel between two sheets of typing paper and
iron… Iron at cotton setting. You will see the embossing powder transfer over to the
typing paper
4. Die cut the FRIEND DIE with black cardstock and adhere to card front. Stamp sentiment in
black Onyx Black Ink.
5. Adhere panel to a black panel the same size as the card front.
6. Flick on some black paint flicks with a paint brush.
7. Adhere to top folding white card. 4.25x5.5.
Hand-stamped
Wreath
by Catherine Pooler
Ink: Fossilized Amber Distress
Ink (Ranger) Wild Wasabi and
Bermuda Bay (Stampin’ Up)
Teal Zeal (Memento) Soft
Stone (Hero Arts)
Paper: White
Approval) Oval shape, Glossy
Accents
1. Cut card stock: 11 x 4-1/4 and 4 x 5-1/4.
2. Draw oval or circle outline on card layer.
3. Stamp leaf image along outline.
4. Fill in with other stamps as desired.
5. Using Direct to Paper, color card base with Soft Stone and adhere stamped layer.
6. Using Direct to Paper, color scrap paper with Fossilized Amber ink. Die cut, adhere to card
front and cover with Glossy Accents.
7. Add sequins and assemble!
Faux- Watercolored
Flowers
by Isha Gupta
Stamps:(Stamp of Approval)
Ink: Keleidacolor inkpads: Desert
Heat, Berry Blaze, Caribbean Sea;
VersaFine Onyx Black (Imagine
Crafts/ Tsukineko)
Paper: Watercolor Paper (Canson)
Accessories: (Stamp of Approval)
1.
Cut a mat layer measuring 4 x 5 1/2 inches.
2.
Apply green and blue inks through the stencil.
3.
Stamp leaves using generation stamping technique using the same ink colors.
4.
Die-cut the flowers, stamp using various ink colors. Dab a wet brush over it for some
added touch of color.
5.
Cut a strip of cardstock and sponge some orange ink, so it matches exactly as the
flowers.
6.
Assemble everything together as per the card photo. 7.
Stamp sentiment and adhere the sequins.
Best Friend
by CatherinePooler
Paper: White, Glimmer Paper
(SU)
Ink: Bubble Gum, Fresh Peach,
Soft Apricot, Tide Pool (Hero
Arts), Teal Zeal, Love Letter, Lady
Bug, Rich Cocoa, Morocco
(Memento), Ripe Avocado
(Papertrey Ink)
Accessories: (Stamp of Approval)
1. Cut card stock: 11 x 4-1/4, 5-1/4 x 4, 3-3/4 x 5.
2. Stamp images in lighter color, then stamp darker color on top.
3. Using Direct to Paper, ink the layer and adhere to card stock base.
4. Cut “Friend” and adhere to card front.
5. Ink “best” and stamp.
6. Embellish and assemble!
Soft & Beautiful Love Ya
by Catherine Pooler
Ink: Autumn Rose, Simply
Chartreuse (Paper Trey Ink), Soft
Pink, Soft Pool, Tide Pool, Soft
Purple, Soft Vanilla, Soft Stone
(Hero Arts), Angel Pink, Pear Tart,
Lulu Lavender (Memento) Paper: White, Glimmer Paper
(SU)
Approval)
1. Cut card stock to 4-1/4 x 11, 4 x 5-1/2 , 3-3/4 x 5.
2. Stamp images on card stock.
3. Die cut “love ya” from glimmer paper, or foil, or die cut from white card stock and gold
emboss the die cut.
4. Adhere die cut to card base and stamp greeting below it.
5. Using Direct to Paper, color layer with Autumn Rose ink and assemble layers.
6. Add sequins.
Watercolored Tag
by Catherine Pooler
Paper: Bristol, Black
Ink: Memento Black Ink Pad, Salty
Ocean Distress Ink, Versamark,
White Craft Ink, Zig Real Brush
Markers: Yellow, Bright Yellow,
Pink, Cobalt Blue
Approval) White Embossing
Powder, Baker's Twine
1.
Cut card stock to 4-1/4 x 11, 4 x 5-1/2 , 3-3/4 x 5 and cut tag with Big Shot.
2. Stamp images in Versamark Ink or White Craft Ink, pour white embossing powder on top
and heat.
3. Scribble color on tag as desired. Spritz with water and set aside to dry.
4. Stamp background, add star embellishments and assemble layers.
5. Add tag with dimensional adhesive.
6. White emboss greeting on black, trim and attach to card front.
*View the video on how this card and the card below were made here.
Flower Border
by Catherine Pooler
Paper: Bristol, Black
Ink: Memento Black Ink Pad, Salty
Ocean Distress Ink, Versamark,
White Craft Ink, Zig Real Brush
Markers: Yellow, Bright Yellow,
Pink, Cobalt Blue
Approval) White Embossing
Powder, Baker's Twine
1. Cut card stock to 5-1/2 x 8-1/2, 5-3/8 x 4-1/8 and 5-1/4 x 4.
2. Stamp images in Versamark Ink or White Craft Ink, pour white embossing powder on top
and heat.
3. Sponge Distress Ink along the edge, trying not to overlap flowers.
4. Scribble color on flowers and outside flowers.
5. Spritz with water and let dry.
6. Stamp sentiment, adhere layers and attach sequins.
*View the video on how this card and the previous one were made here.
Love Ya Tag
by Catherine Pooler
Ink: Pear Tart, Black (Memento),
Orange Soda, Tide Pool (Hero
Arts)
Approval) Glossy Accents,
Acetate, Embossing Paste,
Dazzling Diamonds Glitter (SU)
Micron Pen
1. Cut card stock: 11 x 5-1/2, 4 x 5-1/2, 3-1/2 x 5-1/2.
2. Using Direct to Paper, color card stock with Tide Pool Ink, adhere to card base.
3. Use stencil to line up hand drawn black circles, stamp burst image on some of the doodle
circles.
4. Adhere layers together.
5. Stamp greeting repeatedly on tag, fill in with Pear Tart bursts.
6. Cut out “Love Ya” die and assemble as shown in the video.
7. Adhere tag to card using dimensional adhesive.
8. Color card stock using Direct to Paper technique, cut out with circle dies, adhere to card
and cover with Glossy Accents.
*View the video on how this card was created here.
Lilac Stenciled Card
by Catherine Pooler
Ink: Tuxedo Black, Lilac Posies
(Memento)
Black (Stampin’ Up)
Accessories: Dies and Stencil
(Stamp of Approval) Embossing
Paste, Glitter
1. Cut card stock: 11 x 5-1/2, 3-3/4 5-1/2, 1-1/2 x 5-1/2, black sliver.
2. Stencil Embossing Paste on part of the card, remove stencil and sprinkle on glitter.
3. Using Direct to Paper, color card stock with Lilac Posies ink and adhere to card. Add black
sliver accent.
4. Create tag as shown in the video. Assemble.
Doodled Background
by Catherine Pooler
Ink: Pear Tart, Black (Memento),
Orange Soda, Tide Pool (Hero
Arts)
Black (Stampin’ Up)
Approval) Glossy Accents,
Micron Pen
1. Cut card stock: 11 x 5-1/2, 5 x 4-1/4, 1/2 x 4-1/4.
2. Use stencil to create the doodle circles.
3. Stamp flowers on circles.
4. Stamp greeting.
5. Cut circles from die, color with ink, add to project and cover in Glossy Accents.
Stenciled & Stamped
Friend
by Heather North
Ink: Daffodil Delight, Melon Mambo,
Versamark (Stampin' Up)
Paper: Whisper White (SU)
Accessories: Stencil & Dies (Stamp of
Approval) Iridescent Ice Embossing
Powder, Melon Mambo Embossing
Powder (SU)
1. Lay circle stencil over white cardstock. Use washi tape, post-it note tape or painters tape
to keep stencil in place.
2. Randomly stamp small flowers in several circles with Versamark ink.
3. Remove stencil and sprinkle with embossing powder.
4. Heat set embossing powder.
5. Lay stencil back over your cardstock, lining up the flowers inside the circles and use
removable tape to keep it in place.
6. Sponge yellow ink over the entire surface
7. Cut cardstock down to 4 x 5 1/4”.
8. Use direct to paper technique on mat (4 1/4" x 5 1/2"), swipe pink ink over the cardstock
until it is completely covered.
9. Die cut sentiment out of the center of the cardstock, making sure not to cut too close to the
edges.
10. Cover sentiment with versamark, then sprinkle Irridescent Ice embossing powder. Heat
set until shiny & sparkly.
11. Assemble card layering the stenciled piece over the pink mat, then adhere sentiment and
sequins.
Friendly Flowers
by Maureen Merritt
Paper: Real Red, Pink Pirouette
(Stampin’ Up) Hibiscus Burst,
Hawaiian Shores, Simply Chartreuse,
Aqua Mist (Papertrey Ink) Black
(WPlus9)
Accessories: Dies and Sequins
(Stamp of Approval)
1. Die cut the Friendly Flowers Fri-Dies from a variety of colored card stock and the
sentiment from black card stock.
2. Layer the flowers together. Add variation by assembling some with pop dots and some
with liquid glue.
3. Cut a piece of white card stock to 3 3/4 x 5 inches. Adhere the sentiment and then scatter
the flowers as if they are falling from the top left.
4. Adhere the white layer to a piece of Hawaiian Shores card stock that has been trimmed to
3 7/8 x 5 1/8 inches. Then add to an Aqua Mist card base.
5. Embellish with sequins and beads.
Watercolored Curtis
by Catherine Pooler
Paper: Marshmallow (Bazzill) Black
(SU)
Ink: Versamark, Zig Markers: Persian
Green, Light Blue, Light Carmine,
Purple, Peach Pink, Light Pink,
Turquoise Green, English Lavender,
Blue, Violet, Light Violet
Approval) White Embossing Powder 1. Stamp the Curtis Background on white card stock with Versamark Ink and cover with
Embossing Powder. Heat.
2. Scribble color over embossed background, spritz with water and let dry.
3. Cut to 3-1/4 x 4-1/2 and mount on 3-1/2 x 4-3/4 black card stock.
4. Adhere to 11 x 4-1/4 card base with dimensional adhesive.
5. Add die cut sentiment and white embossed greeting strip (1/2 x 2-3/4).
Rainbow Tag
by Catherine Pooler
Paper: Marshmallow (Bazzill), Black
(SU)
Ink: Versamark, Memento Black, Zig
Markers: Cobalt, Bright Yellow, Pink,
Light Green
Accessories: White Embossing
Powder 1. Stamp Curtis Background on white card stock with Versamark Ink and cover with
Embossing Powder. Heat.
2. Scribble color over embossed background, spritz with water and let dry.
3. Cut to 5-1/2 x 3-1/2. Add 1 x 5-1/2 strip of black and adhere to 11 x 4-1/4 card base.
4. Die cut tag and “Love Ya”. Stamp greeting and adhere together.
5. Color flower die cuts and add to card.
6. Embellish with sequins.

Click here to your Project Guide

Transcription

Similar documents

Shabby Chic Gift Box

Xstamper Instructions Email - Pay

A b out this Stamp Rally

Project Sheet

Stamp Affixing Attachment - Brochure

your tax return and save a tree.

What Is My Stamp Worth?

Stamp Your Art Out