Asset Sales, Inc. LENTZ AUTOMOTIVE, INC.

Plant Closed
LENTZ AUTOMOTIVE, INC.
CNC FACILITY MFG. PARTS FOR NASCAR RACING TEAMS
1514 NC HWY 10W – NEWTON, NC 28658
TUESDAY, SEPTEMBER 17TH @ 10:00 A.M. EDT
Inspection: MONDAY, SEPTEMBER 16TH FROM 8:00 A.M. – 4:00 P.M. EDT
<
MORI SEIKI MODEL
NV5000A-40
3-AXIS CNC VERTICAL
MACHINING CENTER
>
OKUMA MODEL
MC-V4020B
3-AXIS CNC VERTICAL
MACHINING CENTER
2002
2000
LOW
HOURS
2008
OKUMA MODEL MA-40HA 3-AXIS CNC HORIZONTAL MACHINING CENTER
Asset Sales, Inc.
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325
www.asset-sales.com info@asset-sales.com
NAGEL PRECISION MODEL DM 25-1 CNC GUN DRILL
European Headquarters
P.O. Box 819, Halifax HX1 9QQ UK
Tel / Fax 07836.347880
peteraml@asset-sales.co.uk
Asset Sales (Canada) Inc.
4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z1L5
Tel 902.852.5331 Fax 704.821.4325
gmuller@asset-sales.ca
MACHINERY INSPECTION DATE & TIMES – MONDAY, SEPTEMBER 16TH FROM 8:00 A.M. – 4:00 P.M. EDT
<
MORI SEIKI MODEL
NV5000A-40
3-AXIS CNC VERTICAL
MACHINING CENTER
>
OKUMA MODEL
MC-V4020B
3-AXIS CNC VERTICAL
MACHINING CENTER
2002
Visit Our Website to See
Upcoming Auctions &
Join Our Mailing List
2000
www.asset-sales.com
CNC VERTICAL
MACHINING CENTERS
2000
MORI SEIKI Model NV5000A-40 3-Axis
CNC Vertical Machining Center with 43”
x 23-1/2” Slotted Table, X-Axis Travel
31.5”, Y-Axis 20.10”, Z-Axis 20.10”, CAT
40 Taper, 30 ATC, Coolant Thru
Spindle, 12,000 RPM, MSG-501 CNC
Control, Work Lights, Very Low Hours,
sn:NV501BB0027, mfg.2002
HURCO MODEL MD-1 3-AXIS CNC VERTICAL
MACHINING CENTER
OKUMA MODEL MC-40VB 3-AXIS CNC VERTICAL MACHINING CENTER
OKUMA Model MC-V4020B 3-Axis CNC
Vertical Machining Center with 48” x 20”
Slotted Table, X-Axis Travel 40”, Y-Axis
20”, Z-Axis 17.72”, CAT 50 Taper, 32
ATC, Flood Coolant, Remote Hand
Control, OSP-U10M CNC Control, Work
Lights, 6000 RPM, RS232 Port,
sn:092000105, mfg.2000
OKUMA Model MC-40VB 3-Axis CNC
Vertical Machining Center with 20” x 391/2” Slotted Table, X-Axis Travel 30”, YAxis 16.03”, Z-Axis 17.72”, #50 Taper,
20 ATC, Flood Coolant, Remote Hand
Control, OSP 7000M CNC Control,
Work Lights, 5000 RPM, Gear Driven,
Rapid, RS232 Port, sn:0853, mfg.2000
OKUMA Model MC-40VB 3-Axis CNC
Vertical Machining Center with 20” x 391/2” Slotted Table, X-Axis Travel 30”, YAxis 17”, Z-Axis 17”, #50 Taper, 20
ATC, Flood Coolant, Remote Hand
Control, OSP7000M CNC Control, Work
Lights, 5000 RPM, Gear Driven, Rapid,
RS-232 Port, sn:0622, mfg.1995
HURCO MODEL BMC-30 3-AXIS CNC VERTICAL
MACHINING CENTER
Want to Sell Your Shop or Know
Someone Who Does? Call Us
Toll Free at (888) 800-4442! We
Pay Great Finder’s Fees!
HURCO Model BMC-30 3-Axis CNC
Vertical Machining Center with 19-1/2” x
39” Slotted Table, X-Axis Travel 30”, YAxis 20”, Z-Axis 20”, #40 Taper, 24
ATC, Flood Coolant, Hurco Ultimax
Dual Screen CNC Control, sn:BK9005080-A
HURCO Model MD-1 3-Axis CNC
Vertical Machining Center with X-Axis
Travel 30”, Y-Axis 15”, Z-Axis 16”, 12
ATC, 4000 RPM, CNC MD-1 Ultimax
CNC Control (Upgraded), Dual Screen,
sn:MD-8001114A
WWW.ASSET-SALES.COM
OKUMA MODEL MC-40VB 3-AXIS CNC VERTICAL MACHINING CENTER
2
AUCTION SALE DATE & TIME – TUESDAY, SEPTEMBER 17TH @ 10:00 A.M. EDT
(2) 16”W X 22-1/2”H & 16”W X 23”H TOMBSTONES USED WITH
OKUMA HORIZONTAL MACHINING CENTER
<
OKUMA MODEL
MA-40HA 3-AXIS
CNC HORIZONTAL
MACHINING CENTER
Can’t Attend the Sale, but Still
Want to Bid? Visit
www.asset-sales.com for More
Bidding Options!
CNC HORIZONTAL MACHINING CENTER
OKUMA Model MA-40HA 3-Axis CNC Horizontal Machining Center with (2) 16” x 16”
Pallets, X-Axis Travel 22”, Y-Axis 23”, Z-Axis 22”, CAT 40 Taper, 40 ATC, Coolant Thru
Spindle, Pallet Changer, Remote Hand Control, RS232 Port, OSP-U100M CNC Control,
sn:11100443
TOMBSTONES
16” W x 23” H Tombstone used with OKUMA Horizontal Machining Center
16” W x 22-1/2” H Tombstone used with OKUMA Horizontal Machining Center
PRECISION HONING MACHINE & TOOLING
SUNNEN ML-2000DF Precision Honing Machine with Auto Stroking, Coolant, Mandrel
Readout Correction, Initial Diameter, Feed Regulator, ASC Probe with Chiller, Stone
Feed, sn:4C11099, mfg.2004
SUNNEN Model LBB-1810D Precision Honing Machine with Auto Stroking, Coolant,
sn:3F123579
SUNNEN Tooling
2004
SUNNEN HYDRAULIC PRESS
SUNNEN Model BP10K Hydraulic Press with 10 Ton Capacity, sn:9528
SUNNEN MODEL ML-2000DF PRECISION
HONING MACHINE
SUNNEN MODEL LBB-1810D
PRECISION HONING MACHINE
2008
NAGEL PRECISION MODEL DM 25-1 CNC GUN DRILL
CNC GUN DRILL
NAGEL PRECISION Model DM 25-1 CNC Gun Drill with Single Spindle, 30” Stroke, Max Drill Depth 6.5”, Min. Drill 0.035”, Max. Drill 0.25”, Motor Spindles 3.07”, 1000-28,000 RPM, ALLEN
BRADLEY Panel View 600 CNC Control, Chiller Coolant, Gun Drill via Rotating Tool & Counter Rotating Workpiece, Spring Loaded Drill Bushing, Complete Surrounding Safety Guarding,
Standard RHM Coolant Unit with Rexroth Pump and 3-Stage Filtering, sn:3310058, mfg. Installed New 2008, New Today Approximately $200,000
3
MACHINERY INSPECTION DATE & TIMES – MONDAY, SEPTEMBER 16TH FROM 8:00 A.M. – 4:00 P.M. EDT
REBUILT
<
THOMPSON
RECIPROCATING
SURFACE
GRINDER
>
BLANCHARD
MODEL 18C
ROTARY
SURFACE
GRINDER
JET MODEL 1860S GAP BED ENGINE LATHE
BROWN & SHARPE GAGE 2000 CMM
ROSEMONT 60” DIAMETER VIBRATORY VERSITRON ROCKWELL QUICK WAY VALVE FLOOR
FINISHER
HARDNESS TESTER
GRINDER
BRIDGEPORT VERTICAL MILLING MACHINE
MAGNAFLUX MODEL 28501 B
MAGNAFLUX
DEMAGNETIZER
ROTARY SURFACE GRINDER
HARDNESS TESTER
HORIZONTAL BANDSAW
BLANCHARD Model 18C Rotary Surface Grinder with 42”
Diameter Table, Vertical Spindle, Approx. 30 HP, Neutrofier III
Control Station, 6 Speed, 6-33 RPM, Lubrication, sn:9026
VERSITRON ROCKWELL Hardness Tester with Diamond,
Excellent Condition
KALAMAZOO Horizontal Bandsaw Model H9A with Pump
System, 9-1/2” x 12” Approx. Capacity
JET Model 1860S Gap Engine Lathe with 18” Swing x 60”
Centers, Inch / Metric, Tool Post, 10” 3-Jaw Chuck, Tail Stock,
Chip Pan, Threading, 3 Point Steady Rest, Extra 15” 4-Jaw
Chuck, sn:88232H
BRIDGEPORT Vertical Milling Machine with 9” x 42” T-Slotted
Table, Series I, 2 HP, Variable Speed, 60-4200 RPM, Collet
Set Attachment, Cool Mist, Clamping Kit Attachment,
sn:202068
MAGNAFLUX Model 28501 B with 48” x 30-1/2”, 27-1/2
Approx. Capacity, AC/DC, Schiavone Electronic Model
DR32R, sn:231117, mfg.Rebuilt 2006
ROSEMONT 60” Diameter Vibratory Finisher with Controls,
Media, Inner Liner
MAGNAFLUX DEMAGNETIZER Model SB57, sn:421098,
mfg.Rebuilt 2004 by Schiavone Electronic
QUICK WAY VALVE Floor Grinder with 8” Wheel, 1 HP, 3450
RPM, 220/1 Phase, AC Motor, Work Light
RECIPROCATING SURFACE
GRINDER
THOMPSON Reciprocating Surface Grinder with 16” x 48-1/2”
Magnetic Chuck, Newtrofier II Control, Approx. 20” Wheel,
Coolant, Auto Lube, Little Use After Remanufactured by
Dayton Machine Tool, sn:4BB707897
COORDINATE MEASURING
MACHINE
BROWN & SHARPE Gage 2000 Coordinate Measuring
Machine with 22” x 30” Granite Plate, Probe, Accessories,
sn:0602-1783, mfg.2002
MANUAL GAP ENGINE LATHE
MAGNAFLUX MACHINES
4
MANUAL MILLING MACHINE
VIBRATORY FINISHER
VALVE GRINDER
AUCTION SALE DATE & TIME – TUESDAY, SEPTEMBER 17TH @ 10:00 A.M. EDT
5000LB
CAPACITY
CLARK MODEL C330 3000LB LP FORKLIFT
SAYLOR BEALL PISTON AIR
COMPRESSOR
CAT MODEL 50B 5000LB LP FORKLIFT
AIR COMPRESSOR
SAYLOR BEALL PISTON Air Compressor with Approximately 15 HP, Two Stage, sn:9D17-Z92
FORKLIFTS
CAT Model 50B 5000lb LP Forklift with Dual Mast, Solid Tires, 42” Forks, 1207 Hours,
sn:14N1963
CLARK Model C330 3000lb LP Forklift with Single Mast, Solid Tires, sn:1192-2169-107
TRUCK
CHEVY Model 1500 Pick Up Truck with Bed Cover, Stick Drive, A/C, Radio,
Vin#:1GCE14W0TZ131334
ROD FORGINGS
ROD Forgings for Automotive, Type 4043VAR
CHEVY MODEL 1500 PICK UP TRUCK
ATTENDING THE AUCTION IN PERSON?
What you need to Bring…
•Your Drivers License
•Business Card
•Tax Exempt Form if You’re Non Taxable
•Bank Letter of Guarantee if You Will be Paying
via Company Check.
WWW.ASSET-SALES.COM or Call Toll Free 888.800.4442
ROD Forgings for Automotive, Type 300M
MISCELLANEOUS
VIDMARS ● Tool Boxes ● Shell Mills ● Carbide Inserts ● Taps ● Screws & Bolts ● Endmills ●
Ball Mills ● Retention Studs ● Coolant ● Nozzles ● Hand Tools ● Gloves ● Gauges ● Steel
Tables ● 40 & 50 Taper Tool Holders ● SUNNEN H.D. Cap & Rod Grinder ● Hoppers ● Plastic
Carts ● Vises ● Granite Plates ● DAREX Drill Sharpeners ● Angle Plates ● Sockets ●
Micrometers ● Height Gages ● Fans ● C-Clamps ● Drill Presses ● Steel Shelves ● Roller Tables
● Stools ● Counters ● Transformers ● Parts Cleaner ● Threaded Rods ● Grinding Wheels ●
WOLTON 6” Belt Sander ● Dual BALDOR Floor Grinders & Polishers ● Sanding Machines ●
HOTSY Pressure Washer ● Ladders ● Media for Finishers ● Boxes ● Shelving ● Come-A-Long
● Racking ● Plastic Tubs ● Converter (for AC/DC current) SUNNEN Oil (for MB-30-55 Housing
Oil) ● Lockers ● Chains ● 3-Phase LINCOLN Welder ● Bench Grinder ● Garden Tiller ● Foam
Rubber ● Card Board Boxes ● Desks ● Microwave ● Toasters ● Refrigerator ● Time Clock ●
Strapping ● Scales ● Drill Bit Sets ● Inspection ● Tooling ● Etc.
1000’s
AVAILABLE
5
Asset Sales, Inc.
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.com
Asset Sales, Inc. – North Carolina License #6625
Lance Mannion – North Carolina License #6003
3
AVAILABL
E
REBUILT
THOMPSON RECIPROCATING SURFACE GRINDER
ABBREVIATED TERMS & CONDITIONS OF AUCTION
YOUR
PARTICIPATION
AND
BIDDING
ARE
CONSIDERED A LEGALLY BINDING CONTRACT – IT
IS PROHIBITED TO BID ON ANY ITEM THAT YOU
CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE
OR REMOVE BY DESIGNATED DATE. Subject to
amendments and modifications announced by the auctioneer at the
time of the auction, any person participating in the auction shall be
bound by the following terms and conditions. The auctioneer does not
warrant the accuracy, authenticity, description, weight, count or
measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid
process in accordance to the AUCTIONEER’S TERMS &
CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSETSALES.COM. No article shall be removed unless paid in full and all
articles purchased shall be removed in the time allocated by the
auctioneer. No item, no matter how small or how far the purchaser
has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer
and/or a company check accompanied by a bank letter of guarantee
payable to Asset Sales, Inc. All bidding and invoicing will be in US
DIRECTIONS : FROM CHARLOTTE DOUGLAS
Dollars ($). All bidders are responsible for all applicable taxes.
INTERNATIONAL AIRPORT
“LYNYRD SKYNYRD”
Rigging/ Removal of sold equipment is the sole responsibility of the
Exit Airport to Little Rock Rd. Merge onto I-85 S toward
buyer and must be completed by the posted date. Rigging/RemovalMILWAUKEE IRON STREET SURVIVOR
Gastonia
continue for 15.1 miles. Take exit 17 for US-321N.
may not begin until payment has been made in full and the auction
sale is complete. All heavy rigging will require a certificate of
Turn left onto US-321 N/N Chester St for 22.4 miles. Take
insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
exit 33 for Startown Rd continue for 3.7. Turn right onto NCALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,”
“WITH ALL FAULTS” BASIS.
A 13% Buyer’s Premium will apply to all onsite purchases
and a 16% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:
If you plan to bid with Bidspotter.com, you must be pre-approved by
Asset Sales, Inc. The pre-approval process is easy, but necessary.
Asset Sales, Inc. will verify telephone number and confirm agreement
to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED
STATES WILL BE REQUIRED TO WIRE TRANSFER A
MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR
ALL NON-ONSITE BIDDING.
UPCOMING AUCTIONS
THURSDAY, SEPTEMBER 19TH – Davis Steel & Iron Co.
Fabrication & Structural Metal Facility
Onsite & Online
Matthews (Charlotte), NC
DATE TBA – Fac-Ette Mfg.
CNC Machine Shop
Onsite & Online
Leland (Raleigh), NC
10E for 2 miles. Plant will be on the left. Plant is
approximately 45.5 miles from the airport. Follow auction
HOTEL
signs.
Street Address
City, State Zip Code
Telephone Number
HOTELS
HAMPTON INN EXPRESS
104 10th St NW
Conover, NC 28613
(828) 465-7070
LA QUINTA INN & SUITES HICKORY
1607 Fairgrove Church Rd SE
Conover, NC 28613
(828) 465-1100
PUBLIC AUCTION
PLANT CLOSED
LENTZ AUTOMOTIVE, INC.
CNC Facility Mfg. Parts for Nascar Racing Team
NEWTON, NC
TUESDAY, SEPTEMBER 17TH @ 10:00 A.M. EDT