the program

Thermal Spray Centre (CPT)
c/ Martí i Franquès 1. Barcelona 08028. España,
T: +34 934021302;
www.cptub.com; e mail: info@cptub.eu
Thermal Spray Centre (CPT)
ORGANIZERS
rd
3
COLD GAS
SPRAY
Summer School
3rd - 4th June, 2015
BARCELONA / Spain
CPT is member of:
Thermal Spray Centre
3rd Summer School – 3rd - 4th June 2015
Objective
The objective of this course is to introduce the recipe of the emerging Cold Gas Spraying
(CGS) technology for protecting and enhancing surfaces of industrial products.
The principal attribute of this novel technique lies in its capability of producing tailor made
properties of coatings by optimizing the performance of the substrate, the material to be
deposited and the process design parameters for a multiplicity of industrial applications. An
interactive session based on real-life case studies and demonstrators will illustrate the potential
of Cold Gas Spray (CGS) process and focus on the problems and future challenges of the
Thermal Spray technology in today’s competitive world.
Who Should Attend?
Scientists, engineers, techno-entrepreneurs, product developers and design engineers, product
marketers, lecturers, managers and students who are interested to know the recipe of CGS for
protecting and enhancing product surfaces for diverse applications. The target is to have a
maximum of 30 people attending the Summer School.
What is included?
The course fee includes:
•
Printed course materials
•
Course certificate
•
3 hotel nights (2,3 and 4th June)
•
2 days lunch
•
Formal summer school dinner (3th June)
•
Transport from hotel to summer school location
•
Special cost for the Innovation Workshop participation
Course fee: 1.100,00-€+ VAT
If you are interested in join the 3rd CGS Summer School and Innovation Workshop contact @
Dr. Irene Garcia Cano by email: igcano@cptub.eu
Thermal
SpraySpray
Centre Centre
Thermal
3rd Summer School – 3rd - 4th June 2015
Centre de Projecció Tèrmica
Tentative programme
Course
Outline
Introduction
Basic background and evolution of CGS ; Fundamentals and Technology Key Definitions
Fundamentals of Solid State Coatings and Surface Mechanics
Introduction; Interfaces and stabilities in solid state; Surface temperatures in moving bodies;
Stress and deformation fields in half-space and layered elastic media; Thermoplasticity and
viscoplasticity; Perfect plasticity; Rough surfaces.
CGS Fundamentals and Operational Parameters
Particle velocity; Spray distance; Feeding rate; Spray angle; Temperature; Substrate
CGS Processes and Equipment
Low Pressure Cold Gas Process and Equipment; High Pressure Cold Gas Process and Equipment;
Gas influence and selection
CGS Feedstocks/Materials and Quality Control
Classification of TS feedstocks/ Materials; Microstructural aspects of TSCs; Feedstock attributes;
Selection of feedstocks/materials for TS processes
Testing and Quality Control for CGS Coatings
Metallographic preparation and structure characterization; Mechanical tests; Corrosion tests;
Wear test; International standards for testing; Significance of testing standards
Applications of CGS Processes
Case histories and process economics; Case histories: Corrosion, electronics, rebuilding, niche
applications; Control; Cost assessment of CGS processes and equipment
Thermal Spray Centre
Centro de Proyección Térmica
Invited Speakers
Prof. J. M. Guilemany
Course Director. Thermal Spray Centre (CPT), SPAIN
Prof. L. Pawlowski
President of ETSA. University of Limoges (SPCTS)., FRANCE
Prof. H. Kreye
Helmut-Schmidt-University., GERMANY
Dr. A. Concustell
Thermal Spray Centre (CPT), SPAIN
Dr. N. Cinca
Thermal Spray Centre (CPT), SPAIN
Dr. H. Assadi
Helmut-Schmidt-University, GERMANY
Dr. S. Dosta
Thermal Spray Centre (CPT), SPAIN
Dr. F. Gärtner
Helmut-Schmidt-University, GERMANY
Prof. T. Klassen
Helmut-Schmidt-University, GERMANY
Dr. S. Iliescu
Thermal Spray Centre (CPT), SPAIN
Prof. P. Vuoristo
Tampere University of Technology (TUT), FINLAND
Dipl. -Ing. J. Putzier
Putzier Oberflächentechnik GmbH, GERMANY
Mr. Guido Plicht
Air Products, Germany, sponsor
Mr. Peter Richter Jr.
Impact Innovations, Germany, co-sponsor
Mr. H. Fukanuma
Plasma Giken, Japan, co-sponsor
Mr. Klaas Rozema
Dycomet, Netherlands, co-sponsor
Dr. I. Garcia-Cano
Course coordinator. Thermal Spray Centre (CPT), SPAIN
Thermal Spray Centre
Centre de Projecció Tèrmica
Timetable
Tuesday 2nd June
20:00
Welcome and Registration. HOTEL
Wednesday 3rd June
9:00
Session 1
Welcome Address. Prof. J.M. Guilemany & Prof. L. Pawlowski
Basic Background and Evolution
9:15
Cold Gas Spray - past and present. Prof. H. Kreye
10:00
Cold Gas Spray against conventional Thermal Spray Processes. Prof. J.M. Guilemany
10:45
Coffee Break
Session 2
From the feedstocks to the coatings
11:15
Basic Coating Formation. Dr. N.Cinca
12:00
Design, Parameter control and coatings performance. Dr. S. Dosta
12:45
CGS Gases & Supplying Device, Air Products, Dipl. Eng. G. Plicht
13:30
Lunch
Session 3
CGS Modelling and coating built-up
15:00
“Process Optimization by Modeling of In-Flight and Impact Behavior of Particles”
Prof. H. Assadi
15:45
Features of Coating Build- up in CGS. Dr. A.Concustell
Thermal Spray Centre
Centro de Proyección Térmica
Timetable
Session 4: Testing and Quality Control for CGS Coatings
16:30
CGS Coatings Structural & Properties Characterization. Prof. L. Pawlowski
17:15
Assessment of CGS coating qualities. Dr. F. Gärtner
18:00
Close
20:30
Formal Summer School Dinner
Thursday 4th June
Session 5: Applications of CGS Processes
09:00
Selected Application Examples and Performance of Cold Spray Coatings, Prof. T. Klassen
09:45
CGS High Performance Coatings, Dr. S. Dosta
10:30
Coffee Break
Session 6: Equipments & Case Studies
11:00
CGS Low Pressure, DYCOMET, Dipl.-Ing. K. Rozema
11:30
CGS Low Pressure Case Studies on Industrial Sectors, Prof. P. Vuoristo
12:00
CGS High Pressure: Equipment & Performance, IMPACT INNOVATIONS, Mr. P. Richter Jr.
12:30
CGS High Pressure: Equipment & Performance , PLASMA GIKEN, Mr. H. Fukanuma
13.00
CGS High Pressure Case Studies on Industrial Sectors, Dipl.-Ing. J. Putzier
13:30
Lunch
Thermal Spray Centre
Centro de Proyección Térmica
Timetable
Session 7:
Economics & New Trends
15:00
CGS Economics, Dr. S. Iliescu
15:45
New Developments and Tendencies in Cold Gas Spraying, Prof. T. Klassen
Session 8:
16:30
Practical - Technical Work
Software: Tutorial Computer Aid Optimization for CGS parameters, Prof. T. Klassen &
Prof. F. Gärtner
17:15
Understanding CGS Coatings on Different Substrates, Dr. S. Dosta
18:30
Concluding Remarks, Diploma & Summer Course Close Session
Sponsored by:
Co-sponsored by:
Thermal
SpraySpray
Centre Centre
Thermal
3rd Summer School – 3rd - 4th June 2015
Centro de Proyección
Térmica
LOCATION
Finca Pedro Pons
(Vallvidrera Avenue, 25)
The Agustí Pedro i Pons University Foundation was declared its
universal heir by the Most Excellent Dr. Agustín Pedro Pons in his
last will and testament on September 9, 1960. In this will he
bequeathed the Vallvidrera de Can Mestres’ Property, located in
Av. Vallvidrera, 25-29, to the University of Barcelona.
The masía (traditional catalan farmhouse) of Can Mestres is wellknown by many passers-by thanks to its sgraffito, which were
probably added to the house built in the 18th Century on the site
of another 16th-Century farmhouse.
The sgraffito take up the north and south
facades, and one of them boasts a sun dial
which dates from 1776, which could be
when the sgraffito were made. The masía
were restored in 1960, and once again in
2000, offering an ensemble with a quality
similar to those still left in the Sarrià area.
On the upper roof, the weather cock
features a patufet*. It was made of iron,
with very strong gears, and has been
working for more than 50 years. While the
whole unit may seem bulky, it moves very
fast on windy days.
Pedro Pons
building
How to arrive?
The organization will provide transport support
to all the participants from the hotel to the
summer school location and back.
Thermal Spray Centre
Centro de Proyección Térmica
REGISTRATION
3rd Cold Gas Spray Summer School
Innovation Workshop
I would like to register the following persons for the
Participant data
Name and surname:
Profession:
Place of work:
E-mail:
Telephone:
Fax:
How did you recieve the information about the CGS summer school?
Email
Internet
Personal recommendation
Others:…………………………………………………
Organization data
Organization:
Address:
Zip code:
Country:
Others
Payment 3rd CGS Summer school :
Payment Innovation Workshop:
Payment 3rd CGS Summer school +Innovation Workshop:
1.100€+VAT
300€+VAT
1.300,00€+VAT
Bank transfer
Name: Fundació Bosch i Gimpera – UB
Vat number : ESG08906653
Bank Code: CESCESBBXXX
IBAN Code: ES7320130088630200326711
Indicate the organization name and the participant with the Reference: CGS Summer School 2015
Please, send the registration sheet and a copy of the transfer to igcano@cptub.eu or by Fax: +34934021297
Co-sponsored by: