wireless timing network - Alge

Transcription

wireless timing network - Alge
WIRELESS TIMING NETWORK
WTN
The „Wireless Timing Network WTN“ is a complete unique radio network system for timing. This system allows several
different timing devices communication with each other in a wireless network. Due to the internal communication the
system recognizes devices that disappear inside the network and can report it.
The communicating timing network means that you do not need cables any more. The system allows communication
between the different devices that you use in your timing system. The photocell sends the impulses wireless to the timing
device which forwards the data for the display board and results wireless to the receiving devices.
GAZW
Different ALGE-timing devices make the wireless timing network possible. From the universal wireless timing network WTN,
the Timy3 PW* or Timy3 W* with built in wireless timing network, the photocell PR1aW with built in wireless timing
network, or the display board wireless timing network GAZW*, all these devices can communicate within the timing
network.
WirelessTimingNetwork
GAZW
ALGE-TIMING
min.
sec.
Wireless
Timing
Network
WTN
1/100
Display Board GAZ5
Photocell
PR1aW
ALGE-TIMING Timy2W
Timing Device
Timy3 PW
Photocell
PR1aW
Photocell
PR1aW
Wireless
Timing
Network
GAZW
ALGE-TIMING
Display Board D-LINE
GAZW
GAZW
WirelessTimingNetwork
WTN
Timing Device TdC 8001
Timy3 PW
or Timy3 W
Photocell
PR1aW
Display Board Wirless
Timing Network GAZW
* Devices not yet available!
ALGE-TIMING GmbH / Rotkreuzstrasse 39 / A-6890 Lustenau / Austria / Tel: +43-5577-85966 / office@alge-timing.com / www.alge-timing.com
WIRELESS TIMING NETWORK
WTN
The WTN is a bidirectional radio network that replaces the cables within the timing system. It has an adjustable frequency in
the 2.4 GHz band. All devices in the same network communicate with each other. It is possible to transmit impulses and data at
the same time. It is designed to for outdoor use.
The universal genius WTN of this radio network series can be connected to almost every ALGE device. It does not matter if you
take a timing device, impulse device or a display board. Even data transmission to a PC is possible.
This diversity of applications is supported by a display, a keypad, input and output
ports (timing channels, RS232, RS485) and internal batteries.
In developing this unique wireless timing network, special attention was
paid to the ALGE principles: ease of operation, high reliability and robust
design. Latest technology, integrated into a solid case guarantee unique
application possibilities.
Example for a Wireless Timing System:
ALGE-TIMING
Display Board D-LINE
Photocell
PR1aW
WTN
Examples for the use of the WTN
WTN
Ÿ impulse transmission
Ÿ timing for equestrian (show jumping)
Ÿ training in a stadium or arena
Ÿ controlling a display board e.g. D-LINE or GAZ
Ÿ data transmission to a PC
Accessory:
Photocell
PR1aW
ALGE-TIMING Timy2W
Ÿ Bracket with Velco SPB1 (see picture to the right)
Ÿ Cable 280-03: Cable to Timy or TdC8000/8001 (25-pin D-Sub)
Ÿ Cable 283-02: Cable to PC (25 pin to 9 pin - D-Sub)
Ÿ Cable 284-02: Cable to Display Board (25 pin D-Sub to Amphenol-4pin
Timing Device
Timy3 PXE
Technical Data of the WTN:
Frequency:
Power Output:
Timing Channels:
Maximum Distance:
Display Board Interface:
Rs232 Interface:
Batterie:
Case:
2,4 GHz band (16 adjustable frequencies)
10 mW or 10 to100 mW (adjustable)
5 different timing channels
Adjustable c0 (start), c1 (finish), c2, c3, c4
about 350 m at free sight
RS232 interface- 2400 to 19200 Baud
yellow/black banana sockets
RS232 interface- 2400 to 115200 Baud
with Mulitport-socket
3 x AA-batteries (Alkaline or NiMh rechargeable)
Plastic case with yellow elastic rubber jacket, so that
the device is protected in any weather condition.
a..........ALGE Multiport
b..........Powe Supply Input
c ..........Banana Socket yellow:
data output or data input for
GAZ or D-LINE
d..........Banana Socket black:
Ground
e..........Banana Socket red:
timing channel – input
ALGE-TIMING GmbH / Rotkreuzstrasse 39 / A-6890 Lustenau / Austria / Tel: +43-5577-85966 / office@alge-timing.com / www.alge-timing.com
WIRELESS TIMING NETWORK
WTN
Timy3 PW and Timy 3W
The Timy3 with integrated radio module of the series WTN. This device is probably available in Summer 2012.
ALGE-TIMING GmbH / Rotkreuzstrasse 39 / A-6890 Lustenau / Austria / Tel: +43-5577-85966 / office@alge-timing.com / www.alge-timing.com
WIRELESS TIMING NETWORK
WTN
Photocell PR1aW
The photocell PR1aW is a masterpiece of precision and power in a small package.
The transmitter of the photocell sends a modulated infrared beam. The receiver checks the infrared beam and makes an
impulse for each interruption.
The photocell has a built in radio module (2.4 GHz) and therefore a wireless impulse transmission is possible. It is
compatible with the WTN-family (Wireless Timing Network). Up to 15 different radio channels and 5 impulse channels are
adjustable. Of course you can connect the photocell as well by cable with the timing device.
To use the photocell universally it is possible to switch between 3 different functions: Reflection-Photocell, Photocell
Transmitter and Photocell Receiver.
Photocell PR1AW with extendable cover
to protect the lenses from rain or snow!
Photocell Sets:
Reflection-Photocell PR1aW-R:
If one photocell is used with a reflector we call it a ReflectionPhotocell. The function of the reflector is like a mirror, which
reflex the beam sent from the transmitter back to the receiver.
Photocell range: about 25 m (80 ft)
Photocell set:
1 x PR1aW, 1 x PR1a-Ref, 2 x BBG,
1 x 001-10 (10 m / 33 ft)
Photocell PR1aW:
Ÿ Impulse accuracy up to 1/10,000 seconds
Ÿ Different functions with one photocell:
Ÿ Refection-Photocell with Reflector
Ÿ Separate Transmitter-Unit and Receiver-Unit for long
distance use
Ÿ Long distance range
Ÿ Reflection-Photocell about 25 m
Ÿ Through-Beam-Photocell over 150 m (500 feet)
Ÿ Variable power supply for the photocell
Ÿ Battery operation
Ÿ Power supply from ALGE-timing device
Ÿ External power supply from 4 to 18 VDC
Ÿ Built in radio module for wireless impulse transmission
Ÿ Impulse transmission by cable is possible as well
Ÿ Battery indication with LED (green, yellow, red)
Ÿ Indication of photocell adjustment with LED (green,
yellow, red)
Ÿ Synchronisation of two photocells (main and backup) to
prevent interference
Ÿ Adjustment of delay time (20 ms to 2 seconds
(factory adjustment = 20 ms)
Reflection-Photocell PR1aW-RT:
As PR1a-R supplied with tripod (instead of fastening bracket
BBG) and 30 m (100 ft) photocell cable.
Photocell range: about 25 m (80 ft)
Photocell set:
1 x PR1aW, 1 x PR1a-Ref, 2 x TRI128,
1 x 001-30 (30 m / 100 ft)
Reflection-Photocell
Through-Beam-Photocell PR1a-dT:
As PR1aR-d supplied with tripod (instead of fastening bracket
BBG) and 30 m (100 ft) photocell cable.
Photocell range: over 150 m (500 ft)
Photocell set: 1 x PR1aR, 1 x Pr1a, 2 x TRI128,
1 x 001-30 (30 m/100 ft)
Through-Beam-Photocell
ALGE-TIMING GmbH / Rotkreuzstrasse 39 / A-6890 Lustenau / Austria / Tel: +43-5577-85966 / office@alge-timing.com / www.alge-timing.com
WIRELESS TIMING NETWORK
WTN
Photocell PR1aW
Photocell Accessory:
Fastening Bracket BBG
Photocell PR1aR
Fastening Bracket B-S1
Reflector PR1a-Ref
Case for Photocell
KS-PR1a
Tripod TRI128
Cable 001-10 or 001-30
Technical Data:
Range with Reflector:
Range with Transmitter and Receiver:
Impulse Output:
Reaction Time:
Impulse Length:
Radio Frequence:
Radio Power:
Timing Channels:
Measurements PR1A (without swivel head):
Weight PR1A:
Weight PR1a-Ref:
Switches:
Power Supply:
Power Consumption:
Running Time with Internal Batteries:
0.5 to 25 Meter
0 to over 100 Meter
NPN transistor, open collector, active low
300 µs, 1 ms fix adjusted
20 to 2000 ms (adjustable delay time)
2,4 GHz band, 16 adjustable teams
10 mW or 10 to 100 mW (adjustable)
5 different adjustable channels (c0 (start), c1 (finish) c2,c3, c4)
about 118 x 87 x 44 mm
about 0.3 kg
about 0.2 kg
On/Off switch for battery
Three position switch for modes (Norm, TX, RX)
Rotation switch for team adjustment (radio frequency)
Rotation switch for impulse adjstment (impulse channel)
from ALGE timer: 5 VDC stabilized
external power supply: 4 - 18 VDC
internal Battery: 2 x AA-Battery
from Battery with 2,5 VDC: 20 - 46 mA
from timing device 5 Vstab: 9 - 20 mA
the measurements are given at a temperature
of 22°C (72F) and with 1 impulse per minute
Without Radio
Alkkaline AA-batteries:
77 hours
NiCd AA rechargeable batteries:
70 hours
With Radio
Alkkaline AA-batteries:
38 hours
NiCd AA rechargeable batteries:
35 hours
ALGE-TIMING GmbH / Rotkreuzstrasse 39 / A-6890 Lustenau / Austria / Tel: +43-5577-85966 / office@alge-timing.com / www.alge-timing.com
WIRELESS TIMING NETWORK
WTN
Display Board Radio Network GAZW
GAZW
The display board radio network GAZW will probably be available in Spring 2013. It can be connected at the display
board and is powered by the display board. Display boards of the type GAZ, D-LINE or D-RTNM are compatible with the
GAZW.
Windspeed Radio Network WS-W
WS-W
The wind speed radio network WS-W will probably be available in Spring 2013. It allows the cable free communication
between the anemometer WS2 and the terminal Timy3 PW.
ALGE-TIMING GmbH / Rotkreuzstrasse 39 / A-6890 Lustenau / Austria / Tel: +43-5577-85966 / office@alge-timing.com / www.alge-timing.com
WIRELESS TIMING NETWORK
WTN
Example for Equestrian Show Jumping
Finish
Photocell
PR1aW-RT or
PR1aW-dT
Start
Photocell
PR1aW-RT
or PR1aW-dT
Finish Jump Off
Photocell PR1aW-RT or
PR1aW-dT
Timeout
Push Button
022-10
Radio
GAZW
ALGE-TIMING
ID-Number
Rank
ALGE-TIMING
Jumping
JJumping
umping
Pro
P
ro
Pro
Points
ALGE-TIMING
Timy3 PW
Timing & Result PC
Time
D-LINE-Display Board
ALGE-TIMING GmbH / Rotkreuzstrasse 39 / A-6890 Lustenau / Austria / Tel: +43-5577-85966 / office@alge-timing.com / www.alge-timing.com