SS 700 4 Speed Synchro-Shuttle Transmission

SS 700 4 Speed Synchro-Shuttle Transmission
18333 - Drivetrain SS 700 Spec Sheet.indd 1
05/04/2012 16:23
SS 700 4 Speed Synchro-Shuttle Transmission
Performance
• Electro hydraulic direction change
Nominal Rating
Maximum Input Torque
Maximum Input Speed
Torque Converter
Gears
Ratios
75 kW
750 Nm
3000 RPM
W300 (Max. Ratio: 3.01)
4 Forward/4 Reverse
Forward
Reverse
1st
2nd
3rd
4th
6.550
4.060
1.890
1.000
6.550
4.060
1.890
1.000
• Synchromesh On-The-Move gear change
• Direct engine-driven rear coaxial pump drive
• 4WD available in a number of ratios to match a wide range of axle
ratio and tyre size combinations
• Specific housings for 4WD and 2WD versions
Pump Drive
Pump Drive Mounting
Engine Flange
4WD Options
Full engine power rated
SAE B
SAE 3
Spring Applied, Hydraulic Release
Hydraulic Applied, Spring Release
Permanent Engage (No Clutch)
The technical details in this brochure were correct at time of
printing. However, our policy of continual improvement means
that all such details are subject to change. Please contact JCB
to discuss your specific requirements.
For further information about this or any of our other products and services please contact our Sales Department
JCB Drivetrain Systems Ltd Wrexham Industrial Estate, Wrexham, North Wales LL13 9UF. United Kingdom.
Tel: +44 (0) 1978 661140 Fax: +44 (0) 1978 664262 www.itl-trans.com
Americas Office Tel: +1 912 447 2090 Fax: +1 912 447 2106 email: richard.peltier@jcb.com
18333 - Drivetrain SS 700 Spec Sheet.indd 2
05/04/2012 16:23