Juniper Networks M-series : Product Overview

Data Sheet
M Series Multiservice
Edge Routers
Product Overview
Product Description
M Series Multiservice Edge
Juniper Networks® M Series Multiservice Edge Routers span from 10 to 320 Gbps of
Routers combine IP/MPLS
throughput. Because the same scalable and production-hardened Juniper Networks Junos®
capabilities with reliability,
operating system runs on all M Series routers, a consistent set of capabilities is available at
security, and service richness.
all network locations—regardless of customer connection or serving area density.
Enterprises and service providers
use the M Series in small core,
The M Series Multiservice Edge Routers are deployed in the world’s largest networks
multiservice edge, collapsed
because they deliver advanced IP/MPLS services at scale, enabling enterprises and service
POP routing, peering, route
providers to reduce costs through network consolidation while simultaneously generating
reflector, as well as campus
new revenues. Constructed with a clean separation between control plane, forwarding
and WAN gateway applications.
plane, and services plane, M Series routers also support hardware-accelerated Network
Scaling from 10 up to 320 Gbps
Address Translation (NAT), stateful firewall, IPsec, and flow accounting, maximizing
throughput, the M Series offers
aggregation of ATM, Frame Relay,
Ethernet, TDM, and SONET/SDH
services.
revenue and minimizing operational and capital costs.
M7i Multiservice Edge Router
The M7i is a compact router that is often used as a campus border router or as head office
customer premises equipment (CPE). The M7i offers either 2 fixed Fast Ethernet ports, 2 fixed
GbE ports, or 1 fixed GbE port via a Fixed Interface Card (FIC) and 4 ejector-enabled PICs.
M10i Multiservice Edge Router
The M10i is a compact router with fully redundant common hardware components,
including redundant Routing Engines (REs), Compact Forwarding Engine Boards (CFEBs),
fan trays, and power supplies. Often used in small and midsize points of presence (POPs),
the M10i supports 8 ejector-enabled PICs via 2 built-in Flexible PIC concentrators, with
interface speeds up to OC-48/STM-16 and GbE.
M120 Multiservice Edge Router
The M120 supports high-density ATM, Frame Relay, Ethernet, time-division multiplexing
(TDM), and SONET/SDH interfaces with 10GbE or OC-192 uplink capabilities that facilitate
multiservice aggregation in service provider and enterprise networks. The M120 is designed
for maximum redundancy and facilitates the transport of legacy Frame Relay and ATM
traffic over high-bandwidth Ethernet links. PICs are compatible with M320 routers, as well
as Juniper Networks T320 and T640 Core Routers.
M320 Multiservice Edge Router
The M320 supports up to 16 OC-192c/STM-64 ports per chassis or up to 64 OC-48c/STM16 ports per chassis, with 320 Gbps of system throughput. The M320 router supports the
10GbE and OC-192 connections required in smaller core and edge applications as well as
high redundancy. PICs are compatible with M120, T320, and T640 routers.
Your ideas. Connected.™
1
M Series Multiservice Edge Routers
Data Sheet
Architecture and Key Components
circuits, Layer 2 VPNs, Layer 2.5 interworking VPNs, Layer 3 2547
VPNs, virtual private LAN service (VPLS), IPsec, generic routing
Key components of each M Series router are the Packet
encapsulation (GRE), IP-IP, and other tunneling mechanisms.
Forwarding Engine (PFE) and the RE:
This broad set of VPNs meets the needs of the widest possible
• PICs provide a complete range of fiber-optic and electrical
transmission interfaces to the network.
set of customers, and rich packet processing and advanced
services for both IPv4 and IPv6 can be layered on top of VPNs for
• Flexible PIC Concentrators house PICs and connect them to
the rest of the PFE.
additional revenue generation.
Granular quality of service (QoS) and statistics collection are
• The PFE is a logical entity responsible for packet processing
provided on a per port, per logical circuit (DLCI, VC/VP, VLAN),
and forwarding. It physically consists of programmable ASICs
and per channel (to DS0) basis. The comprehensive QoS
that deliver a comprehensive, hardware-based system for
functions include classification, rate limiting, shaping, weighted
packet processing.
round-robin scheduling, strict priority queuing, weighted random
• The RE maintains the routing tables and controls the routing
early detection, random early detection, and packet marking.
protocols, as well as the Junos OS processes that control
Junos OS also provides integrated unified in-service software
the router’s interfaces, the chassis components, system
upgrade (unified ISSU), and a host of other high availability
management, and user access to the router. It processes all
capabilities that include graceful routing restart, MPLS fast
routing protocol updates from the network, so forwarding
reroute, Virtual Router Redundancy Protocol (VRRP), SONET
performance is not affected. The RE also implements each
APS, SDH MSP, BFD, and Link Aggregation Control Protocol
routing protocol with a complete set of Internet features and
(LACP), among many others.
provides full flexibility for advertising, filtering, and modifying
routes. Routing policies are set according to route parameters
such as prefixes, prefix lengths, and BGP attributes.
Customers seeking increased system capacity and Ethernet
density should consider the SDN-ready Juniper Networks MX
Series 3D Universal Edge Routers family. In addition to all of the
Features and Benefits
M Series features, the MX Series provides industry-leading system
M Series Multiservice Edge Routers combine IP/MPLS capabilities
with reliability, stability, security, and service richness that is
capacity, density, and performance for emerging architectures
and services.
proven in service provider edge and core networks, at peering
The MX Series runs the same Junos OS as the M Series, so
points and as a route reflector, as well as in enterprise WAN,
existing customers can upgrade without changing their operations
campus backbone networks, and data center applications.
environment, losing their investment in training, or compromising
The M Series uses the highly reliable Junos OS to deliver the
industry’s most comprehensive VPN portfolio, from Layer 2 virtual
compatibility with their operations support, business support, and
network management (OSS/BSS/NMS) systems.
Product Options
Table 1: M Series Product Options Reference Table
Router
M7i
M10i
M120
M320
Aggregate half-duplex
throughput
10 Gbps/16 Mpps
16 Gbps/16 Mpps
120 Gbps/90 Mpps
(15 Mpps per FEB)
320 Gbps/385 Mpps
Flexible Port Concentrator
(FPC) slots and full duplex
throughput per slot
1 built-in, 4 Gbps
Additional 1 Gbps
for FIC
2 built-in, 4 Gbps
4 FPC slots, 10 Gbps
2 cFPC slots, 10 Gbps
8 FPC slots, 20 Gbps
PICs per chassis
4, plus 2 additional fixed
Fast Ethernet ports or 1
fixed GbE port
8
16
32
Chassis per rack
24
9
4
2
Redundancy
Power and cooling
Yes
Yes
Yes
Specifications
Approvals
For a complete list of hardware specifications, please consult the
For a complete list of Agency Approvals, please consult the M
M Series hardware documentation at www.juniper.net/techpubs/
Series hardware documentation at www.juniper.net/techpubs/
en_US/release-independent/junos/information-products/
en_US/release-independent/junos/information-products/
pathway-pages/m-series/.
pathway-pages/m-series/. Select the chassis you would like
information on, and then select the Safety tab.
2
M Series Multiservice Edge Routers
M7i
Data Sheet
M10i
M120
Juniper Networks Services and Support
Ordering Information
Juniper Networks is the leader in performance-enabling services
Table 2 lists the base units and basic options.
that are designed to accelerate, extend, and optimize your highperformance networks. Our services allow you to maximize
operational efficiency while reducing costs and minimizing
risk, achieving a faster time to value for your network. Juniper
Networks ensures operational excellence by optimizing the
network to maintain required levels of performance, reliability,
and availability. For more details, please visit www.juniper.net/us/
en/products-services.
M320
Note: PICs must be ordered separately. For PIC ordering
information, see the PICs datasheets at:
EIA-530 Serial PIC
DS3, E1, E3, T1 PICs
Encryption Services (ES) PIC
Ethernet and Ethernet IQ PICs
ATM2 IQ PICs
IQ PICs
High-Speed SONET/SDH PICs
10-Gigabit Ethernet Dense Wavelength Division Multiplexing
(DWDM) PIC
10-Gigabit Ethernet Dense Wavelength Division Multiplexing
(DWDM) Optical Transport Network PIC
Enhanced IQ PICs
Circuit Emulation PICs
Enhanced IQ2 Ethernet Services Engine (ESE) PIC
IQ2 Ethernet Services Engine (ESE) PIC
Monitoring Services III PIC
M Series and T Series PIC/FPC Compatibility Matrix
Multi-Rate SONET/SDH PICs
Tunnel Services PIC
For further details on bundles, options, and spares, please
contact a Juniper Networks sales representative.
3
M Series Multiservice Edge Routers
Data Sheet
Table 2: M Series Ordering Information
Model Number
Component
Description
Base Unit
DC Chassis
M7iBASE-DC-2FETX
M7iBASE-DC-1GE
M10iBASE-DC
M120BASE-DC
M320BASE-DC,
M320BASE + PWR-MDC-BB
AC Chassis
M7iBASE-AC-2FETX
M7iBASE-AC-1GE
M10iBASE-AC
M120BASE-AC
M320BASE-AC,
M320BASE + PWR-MAC-BB
FPC
Built into chassis
Built into chassis
–
–
FPC1
–
–
M120-FPC1
M320-FPC1-E3
FPC2
–
–
M120-FPC2
M320-FPC2-E3
FPC3
–
–
M120-FPC3
M120-cFPC-1OC192-XFP
M120-cFPC-1XGE-XFP
M320-FPC3-E2
M320-FPC3-E3
System
Switching and
Forwarding
Boards
Base bundle options:
FEB-M7i-BB
FEB-M7i-E-BB
Integrated services
options:
FEB-M7i-SVCS-BB
FEB-M7i-SVCS-ASME-BB
FEB-M7i-SVCS-MS-E-BB
Base bundle options:
FEB-M10i-M7i-BB
FEB-M10i-M7i-E-BB
Redundancy options:
FEB-M10i-M7i-R
FEB-M10i-M7i-E-R
Base bundle options:
CB-M120-BB
Redundancy options:
CB-M120-R
FEB-M120
Base bundle options:
SIB-M-BB
Redundancy options:
SIB-M-R
Routing Engine
Base bundle options:
RE-400-768-BB
RE-850-1536-BB
Base bundle options:
RE-400-768-BB
RE-850-1536-BB
Redundancy options:
RE-400-768-R
RE-850-1536-R
Base bundle options:
RE-A-1000-2048-BB
RE-A-2000-4096-UPGBB
RE-A-1800X2-8G-UPGBB
RE-A-1800X2-16G-UPGBB
Redundancy options:
RE-A-1000-2048-R
RE-A-2000-4096-R
RE-A-1800X2-8G-R
RE-A-1800X2-16G-R
Base bundle options:
RE-A-2000-4096-BB
RE-A-1800X2-8G-UPGBB
RE-A-1800X2-16G-UPGBB
Redundancy options:
RE-A-2000-4096-R
RE-A-1800X2-8G-R
RE-A-1800X2-16G-R
Flexible PIC
Concentrator
M7i
M10i
M120
M320
Note: Services supported by the Multiservices or Adaptive Services PICs are subject to license.
About Juniper Networks
Juniper Networks is in the business of network innovation. From devices to data centers, from consumers to cloud providers, Juniper
Networks delivers the software, silicon and systems that transform the experience and economics of networking. The company serves
customers and partners worldwide. Additional information can be found at www.juniper.net.
Corporate and Sales Headquarters
APAC and EMEA Headquarters
Juniper Networks, Inc.
Juniper Networks International B.V.
1133 Innovation Way
Boeing Avenue 240
Sunnyvale, CA 94089 USA
1119 PZ Schiphol-Rijk
Phone: 888.JUNIPER (888.586.4737)
Amsterdam, The Netherlands
or +1.408.745.2000
Phone: +31.0.207.125.700
Fax: +1.408.745.2100
Fax: +31.0.207.125.701
www.juniper.net
Copyright 2014 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Junos
and QFabric are registered trademarks of Juniper Networks, Inc. in the United States and other countries.
All other trademarks, service marks, registered marks, or registered service marks are the property of their
respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper
Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
1000042-007-EN Oct 2014