700 - 3800 MHz Catalog

Transcription

700 - 3800 MHz Catalog
ISO 9001 Quality and ISO 14001 Environmental Management
Kathrein-Scala is an ISO 9001 and ISO 14001 certified company
and is in voluntary compliance with EU Directive 2002-95-EC for
Reduction of Hazardous Substances (RoHS).
Order Information
Address:
Kathrein Inc., Scala Division
P.O. Box 4580
Medford, OR 97501
USA
Phone:
(541) 779-6500
Fax:
(800) 850-1116 (toll-free in USA and Canada only)
(541) 779-3991
Email:
mail@kathrein.com
Web site:
www.kathrein-scala.com
Catalogs are available for the following:
30–512 MHz
700–3800 MHz
A CD-ROM is also available containing both catalogs plus
additional technical information.
Website
Kathrein-Scala’s Website may be found at www.kathrein-scala.com . The Website features complete product
data sheets in viewable and downloadable Acrobat files, news and general information about Kathrein,
information on new additions to our product line, and more. Request catalogs and CD-ROM’s, and inquire about
special or custom products. Check the Website for the most up-to-date specifications and radiation patterns.
All specifications are subject to change without notice.
The latest specifications are available at www.kathrein-scala.com.
Copyright 2013 by Kathrein Inc., Scala Division. All rights reserved.
The contents of this book may not be reproduced in whole or in part in any manner without the expressed approval
of Kathrein Inc., Scala Division.
Kathrein Inc., Scala Division, Kathrein, Scala, Paraflector, Miniflector, and Paraslot are registered trademarks of Kathrein Inc., Scala Division.
WiMAX is a trademark of the WiMAX Forum. Schomandl is a trademark of Schomandl-Vertriebs-GmbH.
C35
Company Profile
Kathrein Inc., Scala Division, is a leading manufacturer
of professional antenna and filter systems for
communications and broadcasting, serving commercial
and governmental markets throughout North America
and the Caribbean region. The company is a member
of the Kathrein Group, the world’s oldest and largest
source of professional antenna and filter products for
communication and broadcast applications.
Kathrein-Scala is ISO9001-certified for quality standards
and systems and ISO14001-certified for environmental
standards and is in voluntary compliance with EU
Directive 2002-95-EC for Reduction of Hazardous
Substances (RoHS). The company has been producing
lead-free products since May of 2006.
Our product groups include professional antennas, RF
filters, and accessories for a wide range of applications,
including:
Wireless mobile communications
TV and FM Broadcasting
Wireless Internet
Point-to-point and point-to-multipoint data and
control networks
Land-mobile radio communications systems of all
types
This product catalog for 700 – 3800 MHz contains the
latest in antennas and accessories to accommodate
the needs of the rapidly advancing telecommunications
industry. Many products are newly listed. Extremely
broad-band antennas, covering wireless allocations
from 1.7 to 2.7 GHz are within Kathrein’s recently
introduced products.
As a convenience for our customers, many Kathrein
panel antennas are being shipped with mounting
brackets or band clamps as standard equipment. Look
for the notation “Mounting Clamps Included” on the
catalog page to find affected models.
Our newest products for wireless applications feature
broadband operation, and incorporate adjustable
electrical downtilt with optional remote control, an
important advance that enhances customer satisfaction
and reduces site installation and maintenance costs.
We welcome your inquiries and we look forward to the
opportunity to serve you!
i
Tab Page Summary
Multiple Band Advanced Antennas
Dual Band • Omnidirectional • 698-894 / 1710-2170 MHz • X Polarization
Dual Band • 698-894 / 1710-2170 MHz • XX Polarization
Dual Band • 824-960 / 1710-2170 MHz • V / V Polarization
Dual Band • 790-960 / 1710-2690 MHz • XX Polarization
Dual Band • 790-960 / 1710-2180 MHz • XX Polarization
Dual Band • Trisector • 698-894 / 1710-2170 MHz • XX Polarization
Triple Band • 790-960 / 1710-2690 MHz • XXX Polarization
2 x Dual Band • 790-960 / 1710-2180 MHz • XXXX Polarization
Penta Band • 698-960 / 1710-2690 MHz • XXXXX Polarization
700 and 800 MHz X-POL Panel Antennas
698-960 MHz
824-960 MHz
•
•
X Polarization
XX Polarization
1710 to 2690 MHz Antennas
1710 – 2200 MHz • XX Polarization • Adjustable Electrical Downtilt
1710 – 2200 MHz • X Polarization • Adjustable / Fixed Electrical Downtilt
1710 – 2690 MHz • X Polarization • Adjustable / Fixed Electrical Downtilt
1710 – 2690 MHz • XX Polarization • Adjustable / Fixed Electrical Downtilt
1710 – 2180 MHz • V Polarization
Trisector • 1710-2170 MHz • X Polarization • Adjustable Electrical Downtilt
700 MHz Fixed Tilt Panel Antennas
698-894 MHz
698-894 MHz
•
•
V Polarization
X Polarization
Remote Electrical Downtilt
Other Directional Antennas
Bi-Directional Multiband
Log Periodic
Yagi
Half-Parabolic
Omnidirectional Antennas
Indoor and Special Application Antennas
Indoor
E-911
TMA’s, Combiners, & Electrical Accessories
Tower Mount Amplifiers
Power Dividers & Power Taps
Combiners
Duplexers
Couplers
50 Ohm Loads, GPS Amplifier, Radiation Monitor
Mechanical Accessories
Mounting Configurations
Mounting Kit Options for Panel Antennas
Tilt Kit Options for Panel Antennas
3-Sector Panel Mounting Brackets
Dimensions of Panel Profiles
3-Sector DTMA Mounting Brackets
Dual Panel Mounting Kit
Mounting Kit Options for Omni & Directional Antennas
Tilt Kit Options for Omni & Directional Antennas
Azimuth Adjustment Kits for Panel Antennas
Technical Information
Technical Notes
Formulae
Glossary
ii
Model Number List
Model
Description
1 x 131 1847. . . . . . . . . . . . . . .
1 x 738 546. . . . . . . . . . . . . . . .
2 x 131 1847. . . . . . . . . . . . . . .
2 x 738 546. . . . . . . . . . . . . . . .
3 x 738 546. . . . . . . . . . . . . . . .
736 347. . . . . . . . . . . . . . . . . . .
736 350. . . . . . . . . . . . . . . . . . .
738 192. . . . . . . . . . . . . . . . . . .
738 445. . . . . . . . . . . . . . . . . . .
738 446. . . . . . . . . . . . . . . . . . .
739 619V01 . . . . . . . . . . . . . . .
739 620V01 . . . . . . . . . . . . . . .
741 573. . . . . . . . . . . . . . . . . . .
741 984V01 . . . . . . . . . . . . . . .
741 990V01 . . . . . . . . . . . . . . .
742 033. . . . . . . . . . . . . . . . . . .
742 034. . . . . . . . . . . . . . . . . . .
742 192V01 . . . . . . . . . . . . . . .
742 196V01 . . . . . . . . . . . . . . .
742 213V01 . . . . . . . . . . . . . . .
742 214V01 . . . . . . . . . . . . . . .
742 215V01 . . . . . . . . . . . . . . .
742 218V01 . . . . . . . . . . . . . . .
742 219V01 . . . . . . . . . . . . . . .
742 222V01 . . . . . . . . . . . . . . .
742 223V02 . . . . . . . . . . . . . . .
742 224V02 . . . . . . . . . . . . . . .
742 225V02 . . . . . . . . . . . . . . .
742 226V01 . . . . . . . . . . . . . . .
742 235V01 . . . . . . . . . . . . . . .
742 236V01 . . . . . . . . . . . . . . .
742 237. . . . . . . . . . . . . . . . . . .
742 263. . . . . . . . . . . . . . . . . . .
742 264V02 . . . . . . . . . . . . . . .
742 265V02 . . . . . . . . . . . . . . .
742 266V02 . . . . . . . . . . . . . . .
742 290. . . . . . . . . . . . . . . . . . .
742 317. . . . . . . . . . . . . . . . . . .
742 351V01 . . . . . . . . . . . . . . .
742 352V01 . . . . . . . . . . . . . . .
782 10347. . . . . . . . . . . . . . . . .
782 10348. . . . . . . . . . . . . . . . .
782 10349. . . . . . . . . . . . . . . . .
782 10429. . . . . . . . . . . . . . . . .
782 10469. . . . . . . . . . . . . . . . .
782 10500. . . . . . . . . . . . . . . . .
782 10502. . . . . . . . . . . . . . . . .
Mounting clamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Mounting clamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Mounting clamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Mounting clamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Mounting clamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
Omni antenna 806-894 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
Bidirectional microcell antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Bidirectional microcell antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Omni indoor antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
88° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
88° X-pol PCS ADT panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Log-periodic antenna 790-2690 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
65° X-pol PCS ADT panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
65° X-pol PCS ADT panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
65° X-pol PCS ADT panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
45° X-pol PCS ADT panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
45° X-pol PCS ADT panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
65° X-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
65° X-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
65° X-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
65° X-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
65° X-pol dual-band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
65° X-pol PCS ADT panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
65° X-pol PCS ADT panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
65° X-pol PCS ADT panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
65° X-pol dual-band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
65° X-pol dual-band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
65° X-pol dual-band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
90° V-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
35° X-pol PCS ADT panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
88° X-pol PCS ADT panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
3 sector DTMA mounting bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
3 sector DTMA mounting bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
3 sector DTMA mounting bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
Bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Indicates New Model
Page
iii
Model Number List
iv
Model
Description
782 10504. . . . . . . . . . . . . . . . .
782 10524. . . . . . . . . . . . . . . . .
782 10557. . . . . . . . . . . . . . . . .
782 10578. . . . . . . . . . . . . . . . .
782 10660. . . . . . . . . . . . . . . . .
782 10661. . . . . . . . . . . . . . . . .
782 10662. . . . . . . . . . . . . . . . .
782 10663. . . . . . . . . . . . . . . . .
782 10664. . . . . . . . . . . . . . . . .
782 10665. . . . . . . . . . . . . . . . .
782 10680. . . . . . . . . . . . . . . . .
782 10681. . . . . . . . . . . . . . . . .
782 10682. . . . . . . . . . . . . . . . .
782 10683. . . . . . . . . . . . . . . . .
782 10808. . . . . . . . . . . . . . . . .
782 10809. . . . . . . . . . . . . . . . .
782 10810. . . . . . . . . . . . . . . . .
782 10850V01 . . . . . . . . . . . . .
782 10874. . . . . . . . . . . . . . . . .
782 10876. . . . . . . . . . . . . . . . .
782 10877. . . . . . . . . . . . . . . . .
782 11053. . . . . . . . . . . . . . . . .
782 11054. . . . . . . . . . . . . . . . .
782 11055. . . . . . . . . . . . . . . . .
782 11056. . . . . . . . . . . . . . . . .
782 11063. . . . . . . . . . . . . . . . .
782 11064. . . . . . . . . . . . . . . . .
782 11065. . . . . . . . . . . . . . . . .
Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 dB coupler / hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner 380-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner 380-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner 380-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner 380-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DC stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dual tower mount amplifier AMPS/AMPS/12 dB . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dual tower mount amplifier PCS/PCS/12 dB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dual tower mount amplifier AWS/AWS/12 dB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart bias tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart bias tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart bias tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart bias tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart bias tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart bias tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart bias tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
782 11066. . . . . . . . . . . . . . . . .
782 11293. . . . . . . . . . . . . . . . .
782 11320. . . . . . . . . . . . . . . . .
782 11321. . . . . . . . . . . . . . . . .
782 11322. . . . . . . . . . . . . . . . .
782 11323. . . . . . . . . . . . . . . . .
784 10367. . . . . . . . . . . . . . . . .
784 10470. . . . . . . . . . . . . . . . .
784 10474. . . . . . . . . . . . . . . . .
792 544. . . . . . . . . . . . . . . . . . .
792 699. . . . . . . . . . . . . . . . . . .
792 702. . . . . . . . . . . . . . . . . . .
793 006. . . . . . . . . . . . . . . . . . .
793 301. . . . . . . . . . . . . . . . . . .
793 304. . . . . . . . . . . . . . . . . . .
793 554. . . . . . . . . . . . . . . . . . .
793 555. . . . . . . . . . . . . . . . . . .
800 10046V01 . . . . . . . . . . . . .
800 10121V01 . . . . . . . . . . . . .
Smart bias tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
7-16 DIN Protection Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
Dualband combiner 698-894 MHz - 1710-2400 MHz . . . . . . . . . . . . . . . . . . . . . . . . . 264
Dualband combiner 698-894 MHz - 1710-2400 MHz . . . . . . . . . . . . . . . . . . . . . . . . . 264
Dualband combiner 698-894 MHz - 1710-2400 MHz . . . . . . . . . . . . . . . . . . . . . . . . . 264
Dualband combiner 698-894 MHz - 1710-2400 MHz . . . . . . . . . . . . . . . . . . . . . . . . . 264
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
3 dB coupler with cable absorber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
3 dB coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
DC stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
3 dB coupler (90° hybrid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
3 dB coupler with cable absorber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
90° V-pol dual band panel antenna / integrated combiner . . . . . . . . . . . . . . . . . . . . . . . 79
88° X-pol dual band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Indicates New Model
Page
280
276
200
200
268
268
268
268
268
268
270
270
270
270
274
272
272
205
253
255
257
197
197
197
197
197
197
197
Model Number List
Model
Description
800 10122V01 . . . . . . . . . . . . .
800 10123V03 . . . . . . . . . . . . .
800 10126. . . . . . . . . . . . . . . . .
800 10202V02 . . . . . . . . . . . . .
800 10203V02 . . . . . . . . . . . . .
800 10204V02 . . . . . . . . . . . . .
800 10207V01 . . . . . . . . . . . . .
800 10208V01 . . . . . . . . . . . . .
800 10215V01 . . . . . . . . . . . . .
800 10217V01 . . . . . . . . . . . . .
800 10247V01 . . . . . . . . . . . . .
800 10249. . . . . . . . . . . . . . . . .
800 10290V02 . . . . . . . . . . . . .
800 10291V02 . . . . . . . . . . . . .
800 10292V03 . . . . . . . . . . . . .
800 10294V02 . . . . . . . . . . . . .
800 10300V01 . . . . . . . . . . . . .
800 10303V02 . . . . . . . . . . . . .
800 10305V02 . . . . . . . . . . . . .
800 10306V02 . . . . . . . . . . . . .
800 10307V01 . . . . . . . . . . . . .
800 10308V01 . . . . . . . . . . . . .
800 10309V01 . . . . . . . . . . . . .
800 10310V01 . . . . . . . . . . . . .
800 10360. . . . . . . . . . . . . . . . .
800 10368. . . . . . . . . . . . . . . . .
800 10375. . . . . . . . . . . . . . . . .
800 10378. . . . . . . . . . . . . . . . .
800 10425V01 . . . . . . . . . . . . .
800 10430. . . . . . . . . . . . . . . . .
800 10431. . . . . . . . . . . . . . . . .
800 10439V01 . . . . . . . . . . . . .
800 10442. . . . . . . . . . . . . . . . .
800 10456V02 . . . . . . . . . . . . .
800 10465. . . . . . . . . . . . . . . . .
800 10485V01 . . . . . . . . . . . . .
800 10486V01 . . . . . . . . . . . . .
800 10504V01 . . . . . . . . . . . . .
800 10510V01 . . . . . . . . . . . . .
800 10516V01 . . . . . . . . . . . . .
800 10517V01 . . . . . . . . . . . . .
800 10605. . . . . . . . . . . . . . . . .
800 10606V01 . . . . . . . . . . . . .
800 10621V02 . . . . . . . . . . . . .
800 10622. . . . . . . . . . . . . . . . .
800 10634V01 . . . . . . . . . . . . .
800 10642. . . . . . . . . . . . . . . . .
88° X-pol dual band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
88° X-pol dual band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Omni antenna 1710–2690 MHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
85° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Omni indoor antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
65° X-pol triple band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
65° X-pol triple band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
68° X-pol triple band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
85° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
67° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
85° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
85° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
65° trisector PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
13° V-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
65° trisector PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
65° PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Indoor omni antenna 1710-6000 MHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
Omni antenna 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Omni WiMAX antenna 2490-2690 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
30° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Indoor antenna with integrated combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
65° Dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
65° Dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
65° X-pol AWS Panel Antenna, Extended Downtilt Range . . . . . . . . . . . . . . . . . . . . . . 139
65° X-pol AWS Panel Antenna, Extended Downtilt Range . . . . . . . . . . . . . . . . . . . . . . 143
65° XX-pol Cellular Panel Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
65° XX-pol Cellular Panel Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
40° Dual-beam X-pol AWS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
45° Dual-beam X-pol AWS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
65° WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
65° WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
30° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Indicates New Model
Page
v
Model Number List
Model
Description
Page
800 10643. . . . . . . . . . . . . . . . . 30° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
800 10644. . . . . . . . . . . . . . . . . 65° X-pol dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
800 10647V01 . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
800 10651. . . . . . . . . . . . . . . . . 65° X-pol PCS/WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
800 10652. . . . . . . . . . . . . . . . . 65° X-pol PCS/WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
800 10664. . . . . . . . . . . . . . . . . 65° Dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
800 10665V01 . . . . . . . . . . . . . 65° X-pol dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
800 10666. . . . . . . . . . . . . . . . . 65° X-pol dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
800 10674. . . . . . . . . . . . . . . . . 65° Dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
800 10675. . . . . . . . . . . . . . . . . 65° X-pol multiband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
800 10676. . . . . . . . . . . . . . . . . 65° X-pol multiband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
800 10677. . . . . . . . . . . . . . . . . Dualband indoor antenna w/integrated combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
800 10678. . . . . . . . . . . . . . . . . 40° PCS/WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
800 10679. . . . . . . . . . . . . . . . . 65° PCS/WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
800 10681. . . . . . . . . . . . . . . . . 65° WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
800 10682. . . . . . . . . . . . . . . . . 65° Dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
800 10691. . . . . . . . . . . . . . . . . 65° Tripleband panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
800 10692V01 . . . . . . . . . . . . . 65° Tripleband panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
800 10709. . . . . . . . . . . . . . . . . Dualband indoor omni antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
800 10710. . . . . . . . . . . . . . . . . Triple band indoor omni antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
800 10711. . . . . . . . . . . . . . . . . 65° PCS/WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
800 10721V01 . . . . . . . . . . . . . 85° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
800 10722V01 . . . . . . . . . . . . . 85° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
800 10723V01 . . . . . . . . . . . . . 85° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
800 10734V01 . . . . . . . . . . . . . 65° 700 MHz single band X-pol panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
800 10735V01 . . . . . . . . . . . . . 65° 700 MHz single band X-pol panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
800 10736V01 . . . . . . . . . . . . . 65° 700 MHz single band X-pol panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
800 10753. . . . . . . . . . . . . . . . . 65° Dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
800 10761. . . . . . . . . . . . . . . . . 65° PCS/WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
800 10764V01 . . . . . . . . . . . . . 65° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
800 10765V01 . . . . . . . . . . . . . 65° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
800 10766V01 . . . . . . . . . . . . . 65° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
800 10771. . . . . . . . . . . . . . . . . 65° Dual band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
800 10772. . . . . . . . . . . . . . . . . 65° Dual band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
800 10816. . . . . . . . . . . . . . . . . 90° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
800 10817. . . . . . . . . . . . . . . . . 90° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
800 10825. . . . . . . . . . . . . . . . . 65° Dual band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
800 10826. . . . . . . . . . . . . . . . . 65° Dual band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
800 10828V01 . . . . . . . . . . . . . Dual band omni antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
800 10847. . . . . . . . . . . . . . . . . Dual band radome protected yagi antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
800 10892. . . . . . . . . . . . . . . . . 65° Penta band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
840 10250. . . . . . . . . . . . . . . . . H-pol omni antenna 902-928 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
840 10407 . . . . . . . . . . . . . . . . . . . . . Remote control cable 3.3 ft (1 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10408 . . . . . . . . . . . . . . . . . . . . . Remote control cable 6.6 ft (2 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10409 . . . . . . . . . . . . . . . . . . . . . Remote control cable 16.4 ft (5 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10410 . . . . . . . . . . . . . . . . . . . . . Remote control cable 32.8 ft (10 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10411 . . . . . . . . . . . . . . . . . . . . . Remote control cable 82.7 ft (25 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
vi
Indicates New Model
Model Number List
Model
Description
Page
840 10412 . . . . . . . . . . . . . . . . . . . . . Remote control cable 131.2 ft (40 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10413 . . . . . . . . . . . . . . . . . . . . . Remote control cable 196.9 ft (60 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10414 . . . . . . . . . . . . . . . . . . . . . Remote control cable 262.5 ft (80 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10415 . . . . . . . . . . . . . . . . . . . . . Remote control cable 328.1 ft (100 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10432 . . . . . . . . . . . . . . . . . . . . . Remote control cable 65.6 ft (20 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10433 . . . . . . . . . . . . . . . . . . . . . Remote control cable 164 ft (50 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10451 . . . . . . . . . . . . . . . . . . . . . Remote control cable 492.1 ft (150 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10452 . . . . . . . . . . . . . . . . . . . . . Remote control cable 656.2 ft (200 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10453 . . . . . . . . . . . . . . . . . . . . . Remote control cable 344.5 ft (105 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10454 . . . . . . . . . . . . . . . . . . . . . Remote control cable 360.9 ft (110 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10455 . . . . . . . . . . . . . . . . . . . . . Remote control cable 377.3 ft (115 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
840 10510. . . . . . . . . . . . . . . . . 700 MHz dual band omni antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 225
840 10511. . . . . . . . . . . . . . . . . 700 MHz dual band omni antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 225
840 10515. . . . . . . . . . . . . . . . . 65° 700 MHz dual band trisector antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
840 10516. . . . . . . . . . . . . . . . . 65° 700 MHz dual band trisector antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
840 10520. . . . . . . . . . . . . . . . . 65° dual band panel antenna w/combiner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
840 10525. . . . . . . . . . . . . . . . . 65° dual band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
840 10535. . . . . . . . . . . . . . . . . 65° 700 MHz panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
840 21000 series . . . . . . . . . . . 700 MHz panel antenna mounting kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
840 21110 series . . . . . . . . . . . 60° 700 MHz V-pol panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
840 21120 series . . . . . . . . . . . 80° 700 MHz V-pol panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
840 21140 series . . . . . . . . . . . 60° 700 MHz V-pol panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
840 21150 series . . . . . . . . . . . 80° 700 MHz V-pol panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
840 21170 series . . . . . . . . . . . 60° 700 MHz V-pol panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
840 21180 series . . . . . . . . . . . 80° 700 MHz V-pol panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
840 21210 series . . . . . . . . . . . 60° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
840 21220 series . . . . . . . . . . . 80° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
840 21240 series . . . . . . . . . . . 60° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
840 21250 series . . . . . . . . . . . 80° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
840 21270 series . . . . . . . . . . . 60° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
840 21280 series . . . . . . . . . . . 80° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
840 90013. . . . . . . . . . . . . . . . . Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
850 10002. . . . . . . . . . . . . . . . . Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
850 10003. . . . . . . . . . . . . . . . . Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
850 10008. . . . . . . . . . . . . . . . . Tilt mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
850 10010. . . . . . . . . . . . . . . . . Flexible sealing frame for trisector antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
850 10013. . . . . . . . . . . . . . . . . Tilt mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
850 10014. . . . . . . . . . . . . . . . . Panel azimuth adjustment kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
850 10015. . . . . . . . . . . . . . . . . Panel azimuth adjustment kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
850 10016. . . . . . . . . . . . . . . . . Panel azimuth adjustment kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
850 10017. . . . . . . . . . . . . . . . . Panel azimuth adjustment kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
850 10058. . . . . . . . . . . . . . . . . Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
850 10059. . . . . . . . . . . . . . . . . Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
850 10075. . . . . . . . . . . . . . . . . Dual panel mount kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
850 10076. . . . . . . . . . . . . . . . . Dual panel mount kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
860 10002. . . . . . . . . . . . . . . . . Remote control signal splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
860 10006. . . . . . . . . . . . . . . . . Central control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Indicates New Model
vii
Model Number List
viii
Model
Description
860 10017. . . . . . . . . . . . . . . . .
860 10018. . . . . . . . . . . . . . . . .
860 10019. . . . . . . . . . . . . . . . .
860 10023. . . . . . . . . . . . . . . . .
860 10026. . . . . . . . . . . . . . . . .
860 10030. . . . . . . . . . . . . . . . .
860 10046. . . . . . . . . . . . . . . . .
860 10100. . . . . . . . . . . . . . . . .
860 10101. . . . . . . . . . . . . . . . .
860 10102. . . . . . . . . . . . . . . . .
860 10103. . . . . . . . . . . . . . . . .
860 10104. . . . . . . . . . . . . . . . .
860 10105. . . . . . . . . . . . . . . . .
860 10136. . . . . . . . . . . . . . . . .
860 10137. . . . . . . . . . . . . . . . .
860 10138. . . . . . . . . . . . . . . . .
860 10142. . . . . . . . . . . . . . . . .
860 10148. . . . . . . . . . . . . . . . .
860 10149. . . . . . . . . . . . . . . . .
860 10150. . . . . . . . . . . . . . . . .
860 10151. . . . . . . . . . . . . . . . .
860 10152. . . . . . . . . . . . . . . . .
860 10156. . . . . . . . . . . . . . . . .
CL-900B . . . . . . . . . . . . . . . . . .
GC-1 . . . . . . . . . . . . . . . . . . . . .
GPS-C . . . . . . . . . . . . . . . . . . .
K6226111 . . . . . . . . . . . . . . . . .
K6226201 . . . . . . . . . . . . . . . . .
K6226207 . . . . . . . . . . . . . . . . .
K6226211 . . . . . . . . . . . . . . . . .
K6226217 . . . . . . . . . . . . . . . . .
K6226301 . . . . . . . . . . . . . . . . .
K6226307 . . . . . . . . . . . . . . . . .
K6226311 . . . . . . . . . . . . . . . . .
K6226317 . . . . . . . . . . . . . . . . .
K6226401 . . . . . . . . . . . . . . . . .
K6226411 . . . . . . . . . . . . . . . . .
K6226501 . . . . . . . . . . . . . . . . .
K6226507 . . . . . . . . . . . . . . . . .
K6226511 . . . . . . . . . . . . . . . . .
K6226611 . . . . . . . . . . . . . . . . .
K63236001 . . . . . . . . . . . . . . . .
K751161 . . . . . . . . . . . . . . . . . .
K7515641 . . . . . . . . . . . . . . . . .
MF-900B. . . . . . . . . . . . . . . . . .
MF-940B. . . . . . . . . . . . . . . . . .
MF-950B. . . . . . . . . . . . . . . . . .
2-way power divider 694-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-way power divider 694-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-way power divider 694-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjustable indoor power tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Central control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lightning protection device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Portable control adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-way power divider 694-3800 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-way power divider 694-3800 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-way power divider 694-3800 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-way power divider 694-3800 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-way power divider 694-3800 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-way power divider 694-3800 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-way indoor power tap 694-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-way indoor power tap 694-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-way indoor power tap 694-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Low noise GPS amplifier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Integrated remote control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multi-band low-loss power tap 694-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multi-band low-loss power tap 694-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multi-band low-loss power tap 694-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antenna line configurator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cellular/SMR log-periodic antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gounding clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E911 antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 ohm RF load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjustable indoor power tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Omni antenna 806-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Omni antenna 890-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Miniflector antenna 890-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Miniflector antenna 928-953 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Miniflector antenna 940-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indicates New Model
Page
263
263
263
260
190
196
192
259
259
259
259
259
259
262
262
262
286
188
189
261
261
261
193
221
208
249
290
290
290
290
290
290
290
290
290
290
290
290
290
290
290
260
227
231
219
219
219
Model Number List
Model
Description
MKPP-23 . . . . . . . . . . . . . . . . .
MKPS-1 . . . . . . . . . . . . . . . . . .
MKPS-13 . . . . . . . . . . . . . . . . .
MKPS-2 . . . . . . . . . . . . . . . . . .
MKPS-3 . . . . . . . . . . . . . . . . . .
MKPS-4 . . . . . . . . . . . . . . . . . .
MKPS-5 . . . . . . . . . . . . . . . . . .
MKPX-10 . . . . . . . . . . . . . . . . .
MKPX-11 . . . . . . . . . . . . . . . . .
MKPX-12 . . . . . . . . . . . . . . . . .
MKPX-2 . . . . . . . . . . . . . . . . . .
MKPX-3 . . . . . . . . . . . . . . . . . .
MKPX-4 . . . . . . . . . . . . . . . . . .
MKPX-5 . . . . . . . . . . . . . . . . . .
MKPX-6 . . . . . . . . . . . . . . . . . .
MKPX-9 . . . . . . . . . . . . . . . . . .
MKTB-1 . . . . . . . . . . . . . . . . . .
MKTB-3 . . . . . . . . . . . . . . . . . .
OG-860/1920/GPS-A . . . . . . . .
OGB6-915N . . . . . . . . . . . . . . .
OGB9-915N . . . . . . . . . . . . . . .
PR-850 . . . . . . . . . . . . . . . . . . .
PR-900 . . . . . . . . . . . . . . . . . . .
PR-950 . . . . . . . . . . . . . . . . . . .
RY-840B . . . . . . . . . . . . . . . . . .
RY-860B . . . . . . . . . . . . . . . . . .
RY-900B . . . . . . . . . . . . . . . . . .
SI 1000+ . . . . . . . . . . . . . . . . . .
SL11-915/DT2 . . . . . . . . . . . . .
SL11-940/DT2 . . . . . . . . . . . . .
TY-840 . . . . . . . . . . . . . . . . . . .
TY-860 . . . . . . . . . . . . . . . . . . .
TY-900 . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E911 antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Paraflector antenna 806-896 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Paraflector antenna 890-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Paraflector antenna 940-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radome protected yagi antenna 806-869 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radome protected yagi antenna 824-894 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radome protected yagi antenna 890-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RF monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H-pol omni antenna 902-928 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H-pol omni antenna 928-953 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Yagi antenna 806-869 MHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Yagi antenna 824-894 MHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Yagi antenna 890-960 MHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indicates New Model
Page
308
308
308
308
308
308
308
309
309
309
308
309
309
309
309
308
309
309
250
229
230
217
217
217
215
215
215
291
233
234
213
213
213
ix
Technical Information
Title
Page
A
Advanced X-POL Antenna Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
Attaching the RCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
C
Calculating Downtilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculating HPBW Touchdown Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Comparison of Mechanical and Electrical Downtilt. . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
315
317
318
187
D
Directional Antennas In Front of Reflecting Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . 321
Dual Polarized Base Station Antennas for Polarization Diversity Systems . . . . . . . . 313
E
Engineering Reference - Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
F
Feeder Line Installation for Panel Antennas with Four Connectors . . . . . . . . . . . . . . 184
Feeder Line Installation for Triple-band Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Formula For Estimating Gain For A Standard Directional Dipole Array . . . . . . . . . . . 315
G
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
I
Isolation Between Dipoles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
M
Mounting Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
P
Panel Antenna Test Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Panel Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
R
Radiation Patterns for Side-mounted Omnidirectional Antennas . . . . . . . . . . . . . . . . 320
RET Components: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
S
Signal Distribution of Power Splitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
Signal Distribution of Power Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
W
Wind Survival Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
x
Panel Antenna Product Features
Design and Testing Methods
Kathrein Panel antennas are designed, manufactured, and tested using modern computer
modeling methods, up-to-date manufacturing techniques and sophisticated measurement
equipment to assure that every antenna that bears the Kathrein name will provide long, reliable
DQGWURXEOHIUHHVHUYLFH2QO\WKH¿QHVWPDWHULDOVDUHHPSOR\HGWKDWVDWLVI\GHPDQGVIRUVDIHW\
performance, strength, longevity and reliability. Our antennas are designed to withstand the
shock, vibration, moisture resistance, salt spray, icing and temperature extremes according to
rigorous IEC world standards for antennas. Every antenna is 100% PIM, VSWR, and isolation
WHVWHGWRH[FHHGVSHFL¿FDWLRQV$VXPPDU\RIWKHWHVWVWDQGDUGVIRU.DWKUHLQSDQHODQWHQQDV
appears on Page xiv.
Radome Materials
(YHU\.DWKUHLQUDGRPHLVIDEULFDWHGIURPKLJKVWUHQJWK89UHVLVWDQW¿EHUJODVVPRUHUHFHQW
designs utilize a production process known as pulltrusion. This method of fabrication forces
DPDWUL[RIJODVV¿EHUVDQGUHVLQVWKURXJKSUHFLVLRQGLHVFUHDWLQJDKLJKVWUHQJWKGHVLJQWKDW
when cured has a tensile strength some 4 times greater than injection-molded, thermoformed
SODVWLFV (YHQ JODVV ¿OOHG WKHUPRSODVWLFV GR QRW FRPSDUH WR WKLV WRXJK PDWHULDO .DWKUHLQ¶V
SXOOWUXGHGUDGRPHVDUHULJLGHQYHORSHVWKDWDGGVWUHQJWKWRWKHDQWHQQDVWUXFWXUH.DWKUHLQ¶V
UDGRPHVDUHH[WUHPHO\VWDEOHZLWKUHVSHFWWRWKHUPDOH[SDQVLRQ$W\SLFDOIRRWWKHUPRSODVWLF
radome may expand by as much as .117 inches under elevated temperature conditions, while a
Kathrein radome of the same size expands only .016 inches. This results in joints with higher
LQWHJULW\DQWHQQDVWKDWGRQ¶WEXFNOHLQWKHKHDWRUGHIRUPSHUPDQHQWO\LQVHYHUHHQYLURQPHQWV
Of course, better joint stability means better sealing, which prevents moisture entry.
4GƀGEVQTU
0RVWEDFNSODQHVDQGUHÀHFWRUVDUHIRUPHGIURPULJLG6XU7HF® 650 coated aluminum where
QHHGHGIRUVWUHQJWKDQGUHVLVWDQFHWRFRUURVLRQ-RLQWVEHWZHHQLQGLYLGXDOSDUWVRIWKHUHÀHFWRU
backplane assemblies are deliberately under tension to enhance point contact conduction paths.
Radiators
.DWKUHLQ UDGLDWLQJ HOHPHQWV DUH SUHFLVLRQIRUPHG IURP WKH ¿QHVW PDWHULDOV FDVW DOXPLQXP
silverplated brass, and tin plated, high purity copper, and are carefully chosen to minimize
loss and intermodulation products. They are modeled individually and in arrays using such
SURJUDPVDV$QVRIW+)66(QJOHZDUH*HQHV\VDQG1(&IRU:LQGRZV
Fasteners
)DVWHQHUVDQGRWKHUPDWHULDOVDUHVHOHFWHGZLWKFDUHQRWRQO\IRUVWUHQJWKDQGGXUDELOLW\EXW
for compatibility with adjoining materials so that the passive intermodulation characteristics
of Kathrein antennas are the best in the industry.
xi
Panel Antenna Product Features
/QWPVKPI#EEGUUQTKGU
Mounting accessories are available in many sizes and varieties to accommodate many types
RILQVWDOODWLRQV.DWKUHLQ¶VVWDQGDUGSLSHPRXQWLVXVDEOHIURPLQFKHVXSWRLQFKHV)RU
lighter antennas, stainless steel band clamps are available for pipe diameters up to 5.3 inches.
Brackets are formed from hot dipped galvanized steel, and all hardware is stainless steel.
Many antennas are now being shipped with mounting devices as standard equipment
Feed Networks
Kathrein employs high reliability, low loss cable harnesses and power dividers. Coaxial cable
harnesses, while complex, offer superior PIM performance and straightforward designs, and
offer the ability to provide special characteristics, such as downtilt, without the need to retool.
Kathrein uses custom molded cable mounting devices and harnessing clips to secure power
divider networks, and employs carefully designed cable interface junctions to minimize
production of IM products.
4GOQVG%QPVTQNNGF'NGEVTKECN&QYPVKNV
.DWKUHLQ¶VODWHVWDGMXVWDEOHGRZQWLOW DQWHQQDV PDQ\ FRYHULQJERWKWKH0+]DQG
0+]EDQGVHPSOR\XQLTXHDGMXVWPHQWFRQWUROVWKDWSHUPLWUDSLGWLOWDGMXVWPHQW
ERWKPDQXDOO\DQGYLDRSWLRQDOUHPRWHFRQWURO1RPRYLQJHOHFWULFDOSDUWVDUHLQFRQWDFWZLWK
each other, reducing the possibility of intermodulation.
DC Grounding
Most Kathrein antennas are fully DC-grounded devices, offering enhanced protection to the
antenna and base station equipment from static discharge and lightning. External metallic
parts of all antennas are grounded for the same reason.
Radiation Patterns
Kathrein maintains a full library of radiation patterns for its antennas, both horizontal and
vertical, at multiple downtilts (where appropriate), and at frequencies that span the operational
UDQJHRIWKHDQWHQQD7KHVHSDWWHUQVDUHDYDLODEOHDVGRZQORDGDEOH¿OHVIURPWKH,QWHUQHWDQG
RQ.DWKUHLQ¶V&'520FDWDORJGLVNLQIRUPDWVWKDWVXSSRUWPDQ\PRGHUQDQDO\WLFDOWRROV
5HTXHVWVIRU&'520¶VPD\EHPDGHE\SKRQH)$;RUHPDLORUDWRXU:HEVLWH.DWKUHLQ
radiation patterns are actual measured data from production antennas and represent accurately
WKHSHUIRUPDQFHWKDWFDQEHH[SHFWHGDWLQVWDOODWLRQ+DUPRQL]HGRULGHDOL]HGSDWWHUQVDUH
never offered for analysis.
xii
Panel Antenna Test Specifications
Panel Antenna Test Specifications
Parameter
Type
Vibration
IEC class 4M5
(Mechanical Test)
Shocks
IEC Class 4M5
(Mechanical Test)
sinusoidal
shocks
$LU7HPSHUDWXUH
,(&&ODVV.
expanded
(Climatic Test)
3
+XPLGLW\
,(&&ODVV.
(Climatic Test)
relative
$LU
,(&&ODVV.
(Climatic Test)
speed
Water
,(&&ODVV.
(Climatic Test)
4
Radiation
,(&&ODVV.
(Climatic Test)
5
Salt mist
(Corrosion Test)
Detail Parameter
Test Severity
displacement
(mm)
DFFHOHUDWLRQ
PV)
IUHTXHQF\UDQJH
+]
axes of vibration
3.5
10
±
3 axes
duration
(ms)
DFFHOHUDWLRQ
PV)
number of shocks
direction of shocks
11
50
(°C)
(°C)
low
high
3
Duration
3 x 5 sweep cycles
Reference
(76
,(&
1
1
±
6 directions
-40 (cold)
+75 (dry heat)
(76
,(&
1
1
100 bumps/each direction
16 hours
16 hours
(76
,(&
1
1
(76
,(&
1
1
Condensation (%)
(°C)
PV
±
+30
6 cycles
55
none
(76
,(&
1
1
rain
solar
intensity
(impacting water)
0.01m3PLQ
N3D
water test chamber
15 min
:P)
max. 1000 hours
(76
,(&
1
1
(76
,(&
1
1
1D&O
Concentrate
Concentration (%)
+XPLGLW\
Temperature (°C)
Cyclical
5
±
35
1000 hours
(continuous)
,(&
(QYLURQPHQWDOFRQGLWLRQV .DWKUHLQFHOOXODUDQWHQQDVDUHGHVLJQHGWRRSHUDWHXQGHUWKHHQYLURQPHQWDOFRQGLWLRQVDVGHVFULEHGLQ(76FODVV(
The antennas exceed this standard with regard to the following items:
– Low temperature: –55 °C
±+LJKWHPSHUDWXUHGU\ƒ&
Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna
remains operational even under icy conditions.
(QYLURQPHQWDOWHVWV
1RWH
1RWH
1RWH
1RWH
1RWH
.DWKUHLQDQWHQQDVIXO¿OWKHVWDWHGVSHFL¿FDWLRQVDIWHUFRPSOHWLRQRIWKHHQYLURQPHQWDOWHVWVDVGH¿QHGLQ(767KHKRPRJHQRXVGHVLJQRI.DWKUHLQ¶VDQWHQQDIDPLOLHVXVHVLGHQWLFDOPRGXOHVDQGPDWHULDOV([WHQVLYHWHVWVKDYHEHHQSHUIRUPHGRQW\SLFDO
samples and modules.
(766WDWLRQDU\XVHRQQRQZHDWKHUSURWHFWHGORFDWLRQV
European Telecommunication Standard
,(&6WDWLRQDU\XVHRQQRQZHDWKHUSURWHFWHGORFDWLRQV
International Electrotechnical Commission
(TXLSPHQWXQGHUWHVWPRXQWHGLQWKH³LQXVH´SRVLWLRQ
,QFOXGHVKHDWLUUDGLDWLRQHPLWWHGIURPWKHHTXLSPHQW
7KHHIIHFWRIVSODVKLQJZDWHULVLQFOXGHGLQWKLVWHVW
7KHKHDWLQJHIIHFWRQHTXLSPHQWLVFRYHUHGE\WKHWHVW'U\+HDW
Photochemical tests for materials are made separately.
xiii
Kathrein Worldwide
Kathrein-Werke KG
Rosenheim
Kathrein Mobilcom
Nördlingen
KEL Electronic
Wernberg, Pobezovice
Kathrein France
Paris
Paris
Kathrein Inc., Scala Division
Oregon
Virginia
Kathrein Poland
Warsaw
Kathrein Vertriebs-Ges.
Salzburg
Romkatel
Bucharest
Sodhy
Sodhy
Cergy-Pontoise
Kathrein Austria
Kufstein
Kathrein Romania
Timisoara
Sira
Mailand
Kathrein Technology Shenzhen
Shenzhen
Kathrein India Ltd.
Mumbai
Kathrein SEA (M)
Kuala Lumpur
Olimpus Indl
São Paulo
Kathrein Mobilcom Brasil
São Paulo
Kathrein S.A. PTY
Somerset West
/CPWHCEVWTKPI5CNGU4&
/CPWHCEVWTKPI1PN[
5CNGU1PN[
Representative
xiv
Tat Fook Technology
Shenzhen
Kathrein Asia
Seoul
Kathrein China
Hong Kong
Kathrein Technology (HK)
Hong Kong
Kathrein Indochina
Bangkok
Multiple Band
Advanced Panel Antennas
Multiple Band Advanced Antennas
Dual Band • Omnidirectional • 698-894 / 1710-2170 MHz • X Polarization
Horizontal
Beamwidth Frequency
Omni
698–894 MHz
1710–2170 MHz
Gain
Model
Downtilt
Electrical
Polarization
Height
6 dBi
9 dBi
840 10510, 840 10511
0°
0°
+45° and -45°
24 inches
Page
82
Dual Band • 698-894 / 1710-2170 MHz • XX Polarization
Horizontal
Beamwidth
65°
85°
Frequency
Gain
Model
Electrical
Downtilt
Polarization
Height
698–894 MHz
1710–2170 MHz
10.5 dBi
13.2 dBi
840 10520
with Integrated Combiner
0°
0°
+45° and -45°
23.3 inches
15
698–894 MHz
1710–2170 MHz
10.5 dBi
13.5 dBi
840 10525
0°
0°
+45° and -45°
23.3 inches
15
698–894 MHz
1710–2170 MHz
14.3 dBi
17.5 dBi
800 10764V01
0°–16° ADT
0°–10° ADT
+45° and -45°
55.2 inches
3
698–894 MHz
1710–2170 MHz
15.3 dBi
18.5 dBi
800 10765V01
0°–10° ADT
0°–10° ADT
+45° and -45°
75.5 inches
5
698–894 MHz
1710–2170 MHz
16.4 dBi
18.5 dBi
800 10766V01
0°–10° ADT
0°–10° ADT
+45° and -45°
96 inches
7
698–894 MHz
1710–2170 MHz
13.5 dBi
16.5 dBi
800 10721V01
0°–16° ADT
0°–10° ADT
+45° and -45°
54.9 inches
9
698–894 MHz
1710–2170 MHz
14.7 dBi
17.5 dBi
800 10722V01
0°–10° ADT
0°–10° ADT
+45° and -45°
72 inches
11
698–894 MHz
1710–2170 MHz
15.7 dBi
17.5 dBi
800 10723V01
0°–10° ADT
0°–10° ADT
+45° and -45°
93.2 inches
13
Page
Dual Band • 824-960 / 1710-2170 MHz • V / V Polarization
Horizontal
Beamwidth
90°
Frequency
Gain
Model
Electrical
Downtilt
Polarization
Height
824–960 MHz
1710–2170 MHz
7 dBi
7 dBi
742 290
with Integrated Combiner
0°
0°
Vertical / Vertical
12.9 inches
78
824–960 MHz
1710–2170 MHz
10 dBi
11 dBi
800 10046V01
with Integrated Combiner
0°
0°
Vertical / Vertical
26.1 inches
79
Page
Dual Band • 790-960 / 1710-2690 MHz • XX Polarization
Horizontal
Beamwidth
Frequency
Gain
Model
Electrical
Downtilt
Polarization
Height
65°
790–960 MHz
1710–2690 MHz
8 dBi
8.9 dBi
800 10753
with Integrated Combiner
0°
0°
+45° and -45°
13.1 inches
17
790–960 MHz
1710–2170 MHz
11.4 dBi
13.3 dBi
742 226V01
0°
0°
+45° and -45°
22.8 inches
19
790–960 MHz
1710–2170 MHz
11.4 dBi
13.3 dBi
742 222V01
with Integrated Combiner
0°
0°
+45° and -45°
22.8 inches
21
790–960 MHz
1710–2180 MHz
14.3 dBi
17.2 dBi
742 264V02
0°–14° ADT
0°–8° ADT
+45° and -45°
52.5 inches
31
790–960 MHz
1710–2180 MHz
14.5 dBi
17.2 dBi
742 223V02
with Integrated Combiner
0°–14° ADT
0°–8° ADT
+45° and -45°
52.5 inches
33
790–960 MHz
1710–2690 MHz
14.6 dBi
17.4 dBi
800 10664
0°–16° ADT
+45° and -45°
55.2 inches
35
790–960 MHz
1710–2180 MHz
15.5 dBi
18.5 dBi
800 10771
0°–10° ADT
0°–6° ADT
+45° and -45°
76.1 inches
23
790–960 MHz
1710–2180 MHz
15.9 dBi
18.5 dBi
742 265V02
0.5°–9.5° ADT
0°–6° ADT
+45° and -45°
76.1 inches
37
790–960 MHz
1710–2180 MHz
16.1 dBi
18.5 dBi
742 224V02
with Integrated Combiner
0.5°–9.5° ADT
0°–6° ADT
+45° and -45°
76.1 inches
39
790–960 MHz
1710–2180 MHz
16.3 dBi
18.4 dBi
800 10485V01
2°–14° ADT
4°–14° ADT
+45° and -45°
80.2 inches
29
790–960 MHz
1710–2180 MHz
16.8 dBi
18.4 dBi
800 10772
0°–8° ADT
0°–8° ADT
+45° and -45°
94.4 inches
25
790–960 MHz
1710–2180 MHz
17 dBi
18.3 dBi
800 10486V01
4°–12° ADT
4°–14° ADT
+45° and -45°
99.1 inches
27
790–960 MHz
1710–2180 MHz
17 dBi
18.5 dBi
742 266V02
0°–7° ADT
0°–6° ADT
+45° and -45°
99.7 inches
41
790–960 MHz
1710–2180 MHz
17 dBi
18.5 dBi
742 225V02
with Integrated Combiner
0°–7° ADT
0°–6° ADT
+45° and -45°
99.7 inches
43
790–960 MHz
1710–2690 MHz
17 dBi
18.5 dBi
800 10666
0.5°–9.5° ADT
0°–6° ADT
+45° and -45°
103.2 inches
47
790–960 MHz
1710–2690 MHz
18.4 dBi
18.9 dBi
800 10665V01
0°–10° ADT
2°–8° ADT
+45° and -45°
78.6 inches
45
See the following page for dual and triple band panel and dualband trisector antennas
Page
1
Multiple Band
Advanced Panel Antennas
Multiple Band Advanced Antennas
Dual Band • 790-960 / 1710-2180 MHz • XX Polarization
Horizontal
Beamwidth
Frequency
Gain
Model
Electrical
Downtilt
Polarization
Height
90°
790–960 MHz
1710–2180 MHz
13.6 dBi
16.4 dBi
800 10121V01
0.5°–12.5° ADT
0.5°–10° ADT
+45° and -45°
54.5 inches
72
790–960 MHz
1710–2180 MHz
14.8 dBi
17.7 dBi
800 10122V01
0°–10° ADT
0°–6° ADT
+45° and -45°
75.5 inches
74
790–960 MHz
1710–2180 MHz
16.3 dBi
18 dBi
800 10123V03
0.5°–7° ADT
0°–6° ADT
+45° and -45°
103.7 inches
76
Page
Dual Band • Trisector • 698-894 / 1710-2170 MHz • XX Polarization
Horizontal
Beamwidth
65°
Frequency
Gain
3 x 698–894 MHz
10.4 dBi
3 x 1710–2170 MHz 13.5 dBi
Model
Downtilt
Electrical
Polarization
Height
840 10515, 840 10516
0°
0°
+45° and -45°
24 inches
Page
80
Triple Band • 790-960 / 1710-2690 MHz • XXX Polarization
Horizontal
Beamwidth
65°
Electrical
Downtilt
Frequency
Gain
Model
Polarization
Height
806–960 MHz
1710–2180 MHz
1710–2180 MHz
14.6 dBi
14.8 dBi
14.4 dBi
800 10290V01
0°–14° ADT
0°–14° ADT
0°–14° ADT
+45° and -45°
60.6 inches
Page
51
790–960 MHz
1710–2170 MHz
2490–2690 MHz
14.6 dBi
17.2 dBi
16.3 dBi
800 10674
0°–16° ADT
2°–10° ADT
2°–10° ADT
+45° and -45°
55.2 inches
59
790–960 MHz
1710–2690 MHz
1710–2690 MHz
16 dBi
15.8 dBi
15.7dBi
800 10691
0°–10° ADT
2°–12° ADT
2°–12° ADT
+45° and -45°
78.6 inches
61
790–960 MHz
1710–2180 MHz
1710–2180 MHz
16.3 dBi
16.2 dBi
16.1 dBi
800 10291V02
2°–14° ADT
0°–14° ADT
0°–14° ADT
+45° and -45°
81 inches
53
790–960 MHz
1710–2180 MHz
1710–2180 MHz
17.2 dBi
17.2 dBi
16.6 dBi
800 10292V03
2°–10° ADT
0°–10° ADT
0°–10° ADT
+45° and -45°
102.3 inches
55
790–960 MHz
1710–2170 MHz
2490–2690 MHz
16.1 dBi
18 dBi
17.8 dBi
800 10675
0°–10° ADT
0°–6° ADT
0°–6° ADT
+45° and -45°
78.6 inches
57
698–960 MHz
1710–2690 MHz
1710–2690 MHz
16.8 dBi
16.7 dBi
16.3 dBi
800 10692V01
0.5°–10° ADT
0°–10° ADT
2°–10° ADT
+45° and -45°
103.2 inches
49
790–960 MHz
1710–2170 MHz
2490–2690 MHz
17 dBi
17 dBi
17.8 dBi
800 10676
0.5°–9.5° ADT
0°–6° ADT
0°–6° ADT
+45° and -45°
103.2 inches
63
2 x Dual Band • 790-960 / 1710-2180 MHz • XXXX Polarization
Horizontal
Beamwidth
65°
Electrical
Downtilt
Frequency
Gain
Model
Polarization
Height
790–960 MHz
790–960 MHz
1710–2180 MHz
1710–2180 MHz
15.6 dBi
15.6 dBi
18.5 dBi
18.5 dBi
800 10825
0°–10° ADT
0°–10° ADT
0°–6° ADT
0°–6° ADT
+45° and -45°
76.1 inches
Page
65
790–960 MHz
790–960 MHz
1710–2180 MHz
1710–2180 MHz
16.5 dBi
16.5 dBi
18.5 dBi
18.5 dBi
800 10826
0°–8° ADT
0°–8° ADT
0°–6° ADT
0°–6° ADT
+45° and -45°
94.4 inches
67
Polarization
Height
+45° and -45°
105.9 inches
Penta Band • 698-960 / 1710-2690 MHz • XXXXX Polarization
Horizontal
Beamwidth
65°
2
Frequency
Gain
Model
698–960 MHz
1710–2690 MHz
1710–2690 MHz
1710–2690 MHz
1710–2690 MHz
16.6 dBi
17.6 dBi
17 dBi
17.6 dBi
17 dBi
800 10892
Electrical
Downtilt
1.5°–10° ADT
2°–12° ADT
2°–12° ADT
2°–12° ADT
2°–12° ADT
Page
69
800 10764V01
Integrated Replaceable RET Motor
Mounting Clamps Included
65° Dual Band Panel Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
698–894
X
65°
1710–2170
X
65°
0°–16°
0°–10°
Adj. Electrical Downtilt
Internal remote control
General specifications
698–894 MHz // 1710–2170 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
intrasystem 30 dB // intersystem 35 dB
698–894 MHz
12
0o
0o
24
12
0o
0o
21
o
30
12
0o
0o
24
180o
0o
Maximum input power
per input
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Min sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
Tracking
Squint
180o
90o
15
Gain
Front-to-back ratio
12
0o
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
0°–16° electrical downtilt
Specifications
270o
0o
15
0o
15
0o
180o
90o
0o
24
0o
24
30
270o
90o
o
60
20
30
270o
15
180o
Horizontal pattern
45°- polarization
0o
0o
90o
10
o
60
20
30
270o
0o
o
60
20
30
21
0o
30
21
30
o
o
30
o
60
20
30
0o
21
0o
0o
3
10
10
30
0o
0o
30
3
33
10
0o
0o
33
3
0o
3
1710–2170 MHz
0o
33
0o
33
0o
30
o
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
Vertical pattern
45°- polarization
0°–10° electrical downtilt
Profile PA4
698–806 MHz
14.3 dBi
30 dB (co-polar)
32 dB (average)
500 watts (at 50°C)
824–894 MHz
14.8 dBi
27 dB (co-polar)
30 dB (average)
500 watts (at 50°C)
1710–1755 MHz
17.3 dBi
30 dB (co-polar)
34 dB (average)
300 watts (at 50°C)
1850–1990 MHz
17.5 dBi
30 dB (co-polar)
34 dB (average)
300 watts (at 50°C)
2110–2170 MHz
17.3 dBi
30 dB (co-polar)
34 dB (average)
300 watts (at 50°C)
68° (half-power)
65° (half-power)
61° (half-power)
60° (half-power)
61° (half-power)
15° (half-power)
13.5° (half-power)
7.5° (half-power)
7.5° (half-power)
7.5° (half-power)
0°–16°
0°–16°
0°–10°
0°–10°
0°–10°
0°
17
19
0°
18
22
0°
18
20
0° 5° 10° T
18 18 17 dB
20 20 20 dB
0°
18
20
25 dB (typical)
10 dB, 16 dB (avg)
1.0 db
1.5°
25 dB (typical)
8 dB, 14 dB (avg)
2.0 db
4°
8° 16° T
16 16 dB
19 18 dB
25 dB (typical)
10 dB, 15 dB (avg)
1.5 db
2.5°
8° 16° T
16 16 dB
20 20 dB
25 dB (typical)
8 dB, 14 dB (avg)
1.5 db
4°
5° 10° T
18 17 dB
20 20 dB
25 dB (typical)
8 dB, 14 dB (avg)
2.0 db
4°
5° 10° T
18 17 dB
20 20 dB
11402-C
936.4266
3
800 10764V01
65° Dual Band Panel Antenna
RET motor preinstalled specifications
Logical interface ex factory1) 3GPP/AISG 2.0
Protocols
AISG 1.1 and 3GPP/AISG 2.0 compliant
2 x 8pin connector acc. IEC 60130-9
Hardware interface2)
according to AISG:
– RCUin (male): Control / Daisy chain in
– RCUout (female): Daisy chain out
Power supply
10–30 V
Power Consumption
1 W (standby) 8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles
50,000
Temperature range
-40– +60° C
Certification
FCC 15.107 Class B Computing Devices
Replacement number
860 10149 (see page 189)
1)
The protocol of the logical interface can be switched from 3GPP/AISG 2.0 to AISG
1.1 and vice versa with a vendor specific command. Start-up operation of the iRCU
86010149 is possible in a RET system supporting AISG 1.1 or supporting 3GPP/
AISG 2.0 after performing a layer 2 reset before address assignment. The protocol
can also be changed as follows: AISG 1.1 to 3GPP: Enter “3GPP” into the additional
data filed “Installer’s ID” and perform a layer 7 reset or a power reset. 3GPP to AISG
1.1: Enter “AISG 1” into the additional data field “Installer’s ID” and perform a layer
2 reset or a power reset. After switching the protocol any other information can be
entered into the “Installer’s ID” field.
2)
The tightning torque for fixing the connector must be 0.5 – 1.0 Nm ( hand-tightened’).
The connector should be tightened by hand only!
Mechanical specifications
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
Mounting
40.8 lb (18.5 kg)
45.2 lb (20.5 kg) clamps included
54.7 lb (24.8 kg) clamps and tilt kit included
55.2 x 11.8 x 6 inches
(1403 x 300 x 152 mm)
at 93 mph (150kph)
156 lbf / 59 lbf / 160 lbf
(690 N) / (260 N) / (710 N)
M (Medium)
150 mph (240 kph)
64.8 x 12.6 x 7.5 inches
(1646 x 322 x 190 mm)
50 lb (22.7 kg) clamps included
Mounting hardware included for 2 to 4.6 inch
(50 to 115 mm) OD masts.
KATHREIN
2.625 inches 0.125
(68 mm 4)
58 inches
(1474 mm)
56.4 inches
(1433 mm)
860 10149
Tested To Comply
With FCC Standards
55.2 inches
(1403 mm)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note: Refer to part number
860 10149 for the
specifications of the
remote control actuator.
698–894
–45o
1710–2170
–45o
7-16
7-16
long neck
iRCU
out
in
iRCU
out
in
8pin 8pin 8pin 8pin
female male female male
6 inches
(152 mm)
698–894
+45o
1710–2170
+45o
11.8 inches
(300 mm)
7-16
7-16
long neck
Order Information
Model
800 10764V01
Description
Dualband antenna with 738 546 mounting bracket
0°–16° // 0°–10° electrical downtilt
Dualband antenna with 738 546 mounting bracket
800 10764V01K
and 850 10008 mechanical tilt bracket
0°–16° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
4
800 10765V01
Integrated Replaceable RET Motor
Mounting Clamps Included
65° Dual Band Panel Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
698–894
X
65°
1710–2170
X
65°
0°–10°
0°–10°
Adj. Electrical Downtilt
Internal remote control
General specifications
698–894 MHz // 1710–2170 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
intrasystem 30 dB // intersystem 35 dB
698–894 MHz
30
0o
0o
6
90o
0o
0o
21
21
180o
o
30
0o
Maximum input power
per input
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Min sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
Tracking
Squint
0o
15
Gain
Front-to-back ratio
0o
0o
Specifications
180o
12
24
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
0°–10° electrical downtilt
o
90o
0o
0o
15
15
0o
180o
270o
12
24
0o
60
20
30
0o
12
0o
24
15
180o
Horizontal pattern
45°- polarization
6
270o
90o
21
0o
0o
30
270o
0o
12
0o
24
10
30
0o
20
30
90o
0o
10
20
30
270o
21
30
o
30
o
0o
3
0o
o
60
20
30
0o
33
0o
3
10
10
30
0o
0o
3
33
0o
0o
3
33
0o
33
0o
1710–2170 MHz
30
o
requency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
Vertical pattern
45°- polarization
0°–10° electrical downtilt
Profile PA4
698–806 MHz
15.3 dBi
30 dB (co-polar)
34 dB (average)
500 watts (at 50°C)
824–894 MHz
15.8 dBi
30 dB (co-polar)
34 dB (average)
500 watts (at 50°C)
1710–1755 MHz
18 dBi
27 dB (co-polar)
34 dB (average)
300 watts (at 50°C)
1850–1990 MHz
18.5 dBi
27 dB (co-polar)
34 dB (average)
300 watts (at 50°C)
2110–2170 MHz
18 dBi
27 dB (co-polar)
34 dB (average)
300 watts (at 50°C)
68° (half-power)
65° (half-power)
63° (half-power)
62° (half-power)
63° (half-power)
11.8° (half-power)
10.8° (half-power)
5.8° (half-power)
5.8° (half-power)
5.8° (half-power)
0°–10°
0°–10°
0°–10°
0°–10°
0°–10°
0°
16
18
0°
18
20
0°
18
20
0° 5° 10° T
18 18 18 dB
20 22 20 dB
0°
18
20
30 dB (typical)
10 dB, 15 dB (avg)
1.0 db
2.5°
25 dB (typical)
8 dB, 15 dB (avg)
1.5 db
3°
5° 10° T
16 18 dB
20 20 dB
25 dB (typical)
10 dB, 16 dB (avg)
1.0 db
2.5°
5° 10° T
18 16 dB
22 20 dB
20 dB (typical)
10 dB, 14 dB (avg)
1.5 db
3°
5° 10° T
18 18 dB
22 20 dB
25 dB (typical)
8 dB, 15 dB (avg)
1.5 db
3°
5° 10° T
18 18 dB
22 20 dB
11400-C
936.4267
5
800 10765V01
65° Dual Band Panel Antenna
RET motor preinstalled specifications
Logical interface ex factory1) 3GPP/AISG 2.0
Protocols
AISG 1.1 and 3GPP/AISG 2.0 compliant
2 x 8pin connector acc. IEC 60130-9
Hardware interface2)
according to AISG:
– RCUin (male): Control / Daisy chain in
– RCUout (female): Daisy chain out
Power supply
10–30 V
Power Consumption
1 W (standby) 8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles
50,000
Temperature range
-40– +60° C
Certification
FCC 15.107 Class B Computing Devices
Replacement number
860 10149 (see page 189)
1)
The protocol of the logical interface can be switched from 3GPP/AISG 2.0 to AISG
1.1 and vice versa with a vendor specific command. Start-up operation of the RCU
86010149 is possible in an RET system supporting AISG 1.1 or supporting 3GPP/
AISG 2.0 after performing a layer 2 reset before address assignment. The protocol
can also be changed as follows: AISG 1.1 to 3GPP: Enter “3GPP” into the additional
data filed “Installer’s ID” and perform a layer 7 reset or a power reset. 3GPP to AISG
1.1: Enter “AISG 1” into the additional datafield “Installer’s ID” and perform a layer
2 reset or a power reset. After switching the protocol any other information can be
entered into the “Installer’s ID” field.
2)
The tightning torque for fixing the connector must be 0.5 – 1.0 Nm ( hand-tightened’).
The connector should be tightened by hand only!
Mechanical specifications
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
Mounting
51.8 lb (23.5 kg)
56.2 lb (25.5 kg) clamps included
65.7 lb (29.8 kg) clamps and tilt kit included
75.5 x 11.8 x 6 inches (1918 x 300 x 152 mm)
at 93 mph (150kph)
214 lbf / 81 lbf / 221 lbf
(950 N) / (360 N) / (980 N)
H (Heavy)
150 mph (240 kph)
85.3 x 12.7 x 7.5 inches (2166 x 322 x 190 mm)
62 lb (28.1 kg) clamps included
Mounting hardware included for 2 to 4.6 inch
(50 to 115 mm) OD masts.
KATHREIN
2.625 inches 0.125
(68 mm 4)
78.3 inches
(1989 mm)
76.7 inches
(1948 mm)
860 10149
75.5 inches
(1918 mm)
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
IRT
out
in
698–894
–45o
IRT
698–894
+45o
7-16 long neck7-16
8pin male
8pin female
in
out
Note: Refer to part number
860 10149 for the
specifications of the
remote control actuator.
6 inches
(152 mm)
1710–2170 1710–2170
–45o
+45o
7-16 long neck7-16
8pin female
8pin male
11.8 inches
(300 mm)
Order Information
Model
800 10765V01
Description
Dualband antenna with 738 546 mounting bracket
0°–10° // 0°–10° electrical downtilt
Dualband antenna with 738 546 mounting bracket
800 10765V01K
and 850 10008 mechanical tilt bracket
0°–10° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
6
800 10766V01
Integrated Replaceable RET Motor
Mounting Clamps Included
65° Dual Band Panel Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
698–894
X
65°
1710–2170
X
65°
0°–10°
0°–10°
Adj. Electrical Downtilt
Internal remote control
General specifications
698–894 MHz // 1710–2170 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
intrasystem 30 dB // intersystem 35 dB
698–894 MHz
90o
180o
0o
o
0o
0o
21
0o
15
15
180o
12
24
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
0°–10° electrical downtilt
90o
0o
0o
24
0o
0o
180o
270o
12
0o
0o
15
15
180o
Horizontal pattern
45°- polarization
12
0o
24
o
60
20
30
270o
90o
0o
0o
0o
6
20
21
12
0o
24
10
30
0o
30
270o
30
o
o
30
90o
0o
60
20
0o
0o
0o
30
21
o
30
270o
21
30
30
o
60
20
3
10
10
30
0o
0o
0o
3
33
30
0o
0o
10
33
3
0o
3
0o
33
0o
33
0o
1710–2170 MHz
30
o
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
Vertical pattern
45°- polarization
0°–10° electrical downtilt
Profile PA4
Specifications
Gain
Front-to-back ratio
Maximum input power
per input
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Min sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
Tracking, avg.
Squint
698–806 MHz
16.4 dBi
30 dB (co-polar)
34 dB (average)
500 watts (at 50°C)
824–894 MHz
16.8 dBi
30 dB (co-polar)
34 dB (average)
500 watts (at 50°C)
1710–1755 MHz
18 dBi
27 dB (co-polar)
34 dB (average)
300 watts (at 50°C)
1850–1990 MHz
18.5 dBi
27 dB (co-polar)
34 dB (average)
300 watts (at 50°C)
2110–2170 MHz
18 dBi
27 dB (co-polar)
34 dB (average)
300 watts (at 50°C)
68° (half-power)
65° (half-power)
63° (half-power)
62° (half-power)
63° (half-power)
9.5° (half-power)
8.7° (half-power)
5.8° (half-power)
5.8° (half-power)
5.8° (half-power)
0°–10°
0°–10°
0°–10°
0°–10°
0°–10°
0°
16
18
0°
18
20
0°
18
20
0° 5° 10° T
18 18 18 dB
20 22 20 dB
0°
18
20
30 dB (typical)
10 dB, 15 dB (avg)
1.5 dB
3°
25 dB (typical)
8 dB, 15 dB (avg)
1.5 dB
3°
5° 10° T
16 16 dB
20 18 dB
25 dB (typical)
10 dB, 15 dB (avg)
1 dB
2.5°
5° 10° T
18 16 dB
20 20 dB
20 dB (typical)
10 dB, 12 dB (avg)
1 dB
2.5°
5° 10° T
18 18 dB
22 20 dB
25 dB (typical)
8 dB, 15 dB (avg)
1.5 dB
3°
5° 10° T
18 18 dB
22 20 dB
11398-C
936.4268
7
800 10766V01
65° Dual Band Panel Antenna
RET motor preinstalled specifications
Logical interface ex factory1) 3GPP/AISG 2.0
Protocols
AISG 1.1 and 3GPP/AISG 2.0 compliant
2 x 8pin connector acc. IEC 60130-9
Hardware interface2)
according to AISG:
– RCUin (male): Control / Daisy chain in
– RCUout (female): Daisy chain out
Power supply
10–30 V
Power Consumption
1 W (standby) 8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles
50,000
Temperature range
-40– +60° C
Certification
FCC 15.107 Class B Computing Devices
Replacement number
860 10149 (see page 189)
1)
The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG
2.0 and vice versa with a vendor specific command. Start-up operation of the RCU
86010149 is possible in an RET system supporting AISG 1.1 or supporting 3GPP/
AISG 2.0 after performing a layer 2 reset before address assignment. The protocol
can also be changed as follows: AISG 1.1 to 3GPP: Enter “3GPP” into the additional
data filed “Installer’s ID” and perform a layer 7 reset or a power reset. 3GPP to AISG
1.1: Enter “AISG 1” into the additional datafield “Installer’s ID” and perform a layer
2 reset or a power reset. After switching the protocol any other information can be
entered into the “Installer’s ID” field.
2)
The tightning torque for fixing the connector must be 0.5 – 1.0 Nm ( hand-tightened’).
The connector should be tightened by hand only!
Mechanical specifications
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
Mounting
58.4 lb (26.5 kg)
62.8 lb (28.5 kg) clamps included
72.3 lb (32.8 kg) clamps and tilt kit included
96 x 11.8 x 6 inches
(2438 x 300 x 152 mm)
at 93 mph (150kph)
286 lbf / 106 lbf / 297 lbf
(1270 N) / (470 N) / (1320 N)
H (Heavy)
150 mph (240 kph)
104.6 x 12.6 x 7.5 inches
(2656 x 320 x 190 mm)
71.6 lb (32.5 kg) clamps included
Mounting hardware included for 2 to 4.6 inch
(50 to 115 mm) OD masts.
KATHREIN
2.625 inches 0.125
(68 mm 4)
98.8 inches
(2510 mm)
97.2 inches
(2469 mm)
860 10149
96 inches
(2438 mm)
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
iRCU out
in
698–894
–45o
iRCU
698–894
+45o
7-16 long neck7-16
8pin male
8pin female
in
out
1710–2170 1710–2170
–45o
+45o
Note: Refer to part number
860 10149 for the
specifications of the
remote control actuator.
6 inches
(152 mm)
7-16 long neck7-16
8pin female
8pin male
11.8 inches
(300 mm)
Order Information
Model
800 10766V01
Description
Dualband antenna with 738 546 mounting bracket
0°–10° // 0°–10° electrical downtilt
Dualband antenna with 738 546 mounting bracket
800 10766V01K
and 850 10008 mechanical tilt bracket
0°–10° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
8
800 10721V01
Integrated Replaceable RET Motor
Mounting Clamps Included
85° Dual Band Panel Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
698–894
X
85°
1710–2170
X
85°
0°–16°
0°–10°
Adj. Electrical Downtilt
Internal remote control
General specifications
698–894 MHz // 1710–2170 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
intrasystem 30 dB // intersystem 35 dB
698–894 MHz
0o
20
12
0o
90o
180o
0o
o
30
0o
21
0o
15
Maximum input power
per input
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Min sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
Tracking, avg.
Squint
0o
Gain
Front-to-back ratio
15
0o
Specifications
180o
12
24
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
0°–16° electrical downtilt
90o
0o
0o
24
15
0o
180o
270o
12
0o
0o
24
o
60
20
30
270o
90o
15
180o
Horizontal pattern
45°- polarization
6
0o
270o
0o
0o
0o
30
21
12
0o
24
10
30
0o
20
30
90o
0o
30
o
60
21
0o
30
270o
21
30
o
o
30
20
30
3
10
10
o
60
0o
0o
0o
3
33
30
0o
0o
3
10
33
0o
0o
3
33
0o
33
0o
1710–2170 MHz
30
o
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
Vertical pattern
45°- polarization
0°–10° electrical downtilt
Profile PA4
698–806 MHz
13.5 dBi
25 dB (co-polar)
32 dB (average)
500 watts (at 50°C)
824–894 MHz
14 dBi
25 dB (co-polar)
28 dB (average)
500 watts (at 50°C)
1710–1755 MHz
16.5 dBi
25 dB (co-polar)
26 dB (average)
300 watts (at 50°C)
1850–1990 MHz
16.5 dBi
25 dB (co-polar)
27 dB (average)
300 watts (at 50°C)
2110–2170 MHz
16.5 dBi
25 dB (co-polar)
26 dB (average)
300 watts (at 50°C)
85° (half-power)
85° (half-power)
88° (half-power)
85° (half-power)
88° (half-power)
16.5° (half-power)
15.1° (half-power)
6.7° (half-power)
6.7° (half-power)
6.7° (half-power)
0°–16°
0°–16°
0°–10°
0°–10°
0°–10°
0°
18
20
0°
18
22
0°
18
22
0° 5° 10° T
18 18 18 dB
22 22 22 dB
0°
18
22
15 dB (typical)
8 dB, 12 dB (avg)
0.5 dB
4°
15 dB (typical)
10 dB, 12 dB (avg)
0.5 dB
4°0
8° 16° T
16 18 dB
19 19 dB
20 dB (typical)
10 dB, 14 dB (avg)
1.5 dB
4.5°
8° 16° T
18 17 dB
20 20 dB
22 dB (typical)
10 dB, 15 dB (avg)
1.5 dB
4.5°
5° 10° T
18 16 dB
22 19 dB
15 dB (typical)
10 dB, 12 dB (avg)
0.5 dB
4°
5° 10° T
18 16 dB
22 19 dB
11404-B
936.4269
9
800 10721V01
85° Dual Band Panel Antenna
RET motor preinstalled specifications
Logical interface ex factory1) 3GPP/AISG 2.0
Protocols
AISG 1.1 and 3GPP/AISG 2.0 compliant
2 x 8pin connector acc. IEC 60130-9
Hardware interface2)
according to AISG:
– RCUin (male): Control / Daisy chain in
– RCUout (female): Daisy chain out
Power supply
10–30 V
Power Consumption
1 W (standby) 8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles
50,000
Temperature range
-40– +60° C
Certification
FCC 15.107 Class B Computing Devices
Replacement number
860 10149 (see page 189)
1)
The protocol of the logical interface can be switched from 3GPP/AISG 2.0 to AISG
1.1 and vice versa with a vendor specific command. Start-up operation of the RCU
86010149 is possible in an RET system supporting AISG 1.1 or supporting 3GPP/
AISG 2.0 after performing a layer 2 reset before address assignment. The protocol
can also be changed as follows: AISG 1.1 to 3GPP: Enter “3GPP” into the additional
data filed “Installer’s ID” and perform a layer 7 reset or a power reset. 3GPP to AISG
1.1: Enter “AISG 1” into the additional datafield “Installer’s ID” and perform a layer
2 reset or a power reset. After switching the protocol any other information can be
entered into the “Installer’s ID” field.
2)
The tightning torque for fixing the connector must be 0.5 – 1.0 Nm ( hand-tightened’).
The connector should be tightened by hand only!
Mechanical specifications
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
Mounting
46.3 lb (21 kg)
50.7 lb (23 kg) clamps included
60.2 lb (27.3 kg) clamps and tilt kit included
54.9 x 11.8 x 6 inches
(1394 x 300 x 152 mm)
at 93 mph (150kph)
151 lbf / 57 lbf / 158 lbf
(670 N / 250 N / 700 N)
M (Medium)
150 mph (240 kph)
63.6 x 12.6 x 7.5 inches
(1616 x 322 x 190 mm)
55.1 lb (25 kg) clamps included
Mounting hardware included for 2 to 4.6 inch
(50 to 115 mm) OD masts.
KATHREIN
2.625 inches 0.125
(68 mm 4)
57.6 inches
(1464 mm)
56.1 inches
(1424 mm)
860 10149
54.9 inches
(1394 mm)
Tested To Comply
With FCC Standards
IRT
out
in
698–894
–45o
IRT
698–894
+45o
7-16 long neck7-16
8pin male
8pin female
in
out
1710–2170 1710–2170
–45o
+45o
7-16 long neck7-16
8pin female
8pin male
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note: Refer to part number
860 10149 for the
specifications of the
remote control actuator.
6 inches
(152 mm)
11.8 inches
(300 mm)
Order Information
Model
800 10721V01
Description
Dualband antenna with 738 546 mounting bracket
0°–16° // 0°–10° electrical downtilt
Dualband antenna with 738 546 mounting bracket
800 10721V01K
and 850 10008 mechanical tilt bracket
0°–16° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
10
800 10722V01
Integrated Replaceable RET Motor
Mounting Clamps Included
85° Dual Band Panel Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
698–894
X
85°
1710–2170
X
85°
0°–10°
0°–10°
Adj. Electrical Downtilt
Internal remote control
General specifications
698–894 MHz // 1710–2170 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
intrasystem 30 dB // intersystem 35 dB
698–894 MHz
0o
o
60
20
12
0o
180o
0o
30
o
0o
21
0o
15
0o
Maximum input power
per input
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Min sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
(avg)
Tracking, avg.
Squint
12
24
15
0o
Gain
Front-to-back ratio
180o
90o
0o
0o
Vertical pattern
45°- polarization
0°–10° electrical downtilt
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
0°–10° electrical downtilt
Specifications
12
24
15
0o
180o
270o
90o
0o
0o
24
15
180o
Horizontal pattern
45°- polarization
30
270o
90o
o
60
20
0o
0o
270o
0o
12
0o
24
0o
30
21
90o
10
30
o
60
20
30
270o
0o
30
21
0o
30
21
30
o
o
30
o
60
20
0o
0o
3
10
10
30
0o
33
30
3
0o
10
0o
33
3
0o
3
1710–2170 MHz
0o
33
0o
33
0o
30
o
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
Profile PA4
698–806 MHz
14.65 dBi
28 dB (co-polar)
31 dB (average)
500 watts (at 50°C)
824–894 MHz
15.15 dBi
27 dB (co-polar)
29 dB (average)
500 watts (at 50°C)
1710–1755 MHz
17 dBi
25 dB (co-polar)
28 dB (average)
300 watts (at 50°C)
1850–1990 MHz
17.5 dBi
25 dB (co-polar)
28 dB (average)
300 watts (at 50°C)
2110–2170 MHz
17 dBi
25 dB (co-polar)
28 dB (average)
300 watts (at 50°C)
85° (half-power)
85° (half-power)
85° (half-power)
85° (half-power)
85° (half-power)
12.1° (half-power)
11° (half-power)
5.5° (half-power)
5.5° (half-power)
5.5° (half-power)
0°–10°
0°–10°
0°–10°
0°–10°
0°–10°
0°
16
17
0°
15
16
0°
16
18
0° 5° 10° T
16 16 16 dB
17 17 18 dB
0°
16
18
5° 10° T
16 18 dB
19 21 dB
5° 10° T
18 18 dB
19 22 dB
5° 10° T
16 16 dB
18 18 dB
5° 10° T
16 16 dB
18 18 dB
22 dB (typical)
10 dB, 16 dB (avg)
24 dB (typical)
10 dB, 16 dB (avg)
18 dB (typical)
10 dB, 12 dB (avg)
18 dB (typical)
8 dB, 12 dB (avg)
18 dB (typical)
10 dB, 12 dB
0.5 dB
4°
0.5 dB
4°
0.5 dB
4.5°
0.5 dB
4.5°
0.5 dB
4.5°
11406-B
936.4270
11
800 10722V01
85° Dual Band Panel Antenna
RET motor preinstalled specifications
Logical interface ex factory1) 3GPP/AISG 2.0
Protocols
AISG 1.1 and 3GPP/AISG 2.0 compliant
2 x 8pin connector acc. IEC 60130-9
Hardware interface2)
according to AISG:
– RCUin (male): Control / Daisy chain in
– RCUout (female): Daisy chain out
Power supply
10–30 V
Power Consumption
1 W (standby) 8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles
50,000
Temperature range
-40– +60° C
Certification
FCC 15.107 Class B Computing Devices
Replacement number
860 10149 (see page 189)
1)
The protocol of the logical interface can be switched from 3GPP/
AISG 2.0 to AISG 1.1 and vice versa with a vendor specific
command. Start-up operation of the RCU 86010149 is possible
in an RET system supporting AISG 1.1 or supporting 3GPP/AISG
2.0 after performing a layer 2 reset before address assignment. The
protocol can also be changed as follows: AISG 1.1 to 3GPP: Enter
“3GPP” into the additional data filed “Installer’s ID” and perform
a layer 7 reset or a power reset. 3GPP to AISG 1.1: Enter “AISG
1” into the additional datafield “Installer’s ID” and perform a layer
2 reset or a power reset. After switching the protocol any other
information can be entered into the “Installer’s ID” field.
2)
The tightning torque for fixing the connector must be 0.5 – 1.0
Nm ( hand-tightened’). The connector should be tightened by
hand only!
Mechanical specifications
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
Mounting
57.3 lb (26 kg)
61.7 lb (28 kg) clamps included
74.7 lb (32.3 kg) clamps and tilt kit included
72 x 11.8 x 6 inches
(1828 x 300 x 152 mm)
at 93 mph (150kph)
203 lbf / 75 lbf / 212 lbf
(900 N / 330 N / 940 N)
H (Heavy)
150 mph (240 kph)
80.7 x 12.6 x 7.5 inches
(2050 x 322 x 190 mm)
63.9 lb (29 kg)
Mounting hardware included for 2 to 4.6 inch
(50 to 115 mm) OD masts.
KATHREIN
2.625 inches 0.125
(68 mm 4)
74.7 inches
(1898 mm)
73.1 inches
(1858 mm)
860 10149
72 inches
(1828 mm)
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note: Refer to part number
860 10149 for the
specifications of the
remote control actuator.
IRT
out
in
698–894
–45o
IRT
698–894
+45o
7-16 long neck7-16
8pin male
8pin female
in
out
6 inches
(152 mm)
1710–2170 1710–2170
–45o
+45o
11.8 inches
(300 mm)
7-16 long neck7-16
8pin female
8pin male
Order Information
Model
800 10722V01
Description
Dualband antenna with 738 546 mounting bracket
0°–10° // 0°–10° electrical downtilt
Dualband antenna with 738 546 mounting bracket
800 10722V01K
and 850 10008 mechanical tilt bracket
0°–10° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
12
800 10723V01
Integrated Replaceable RET Motor
Mounting Clamps Included
85° Dual Band Panel Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
698–894
X
85°
1710–2170
X
85°
0°–10°
0°–10°
Adj. Electrical Downtilt
Internal remote control
General specifications
698–894 MHz // 1710–2170 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
intrasystem 30 dB // intersystem 35 dB
698–894 MHz
180o
0o
0o
21
0o
0o
15
15
0o
180o
12
24
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
0°–10° electrical downtilt
o
90o
0o
0o
24
15
0o
180o
12
0o
0o
270o
90o
0o
12
0o
24
60
20
30
270o
90o
15
180o
Horizontal pattern
45°- polarization
0o
6
20
21
0o
30
0o
30
270o
30
o
o
0o
o
60
20
0o
12
0o
24
0o
30
30
90o
10
10
21
0o
30
270o
21
30
30
o
o
3
0o
60
20
30
0o
33
0o
3
10
10
30
0o
0o
3
33
0o
0o
3
33
0o
33
0o
1710–2170 MHz
30
o
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
Vertical pattern
45°- polarization
0°–10° electrical downtilt
Profile PA4
Specifications
Gain
Front-to-back ratio
Maximum input power
per input
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Min sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
(avg)
Tracking, avg.
Squint
698–806 MHz
15.65 dBi
28 dB (co-polar)
31 dB (average)
500 watts (at 50°C)
824–894 MHz
16.15 dBi
27 dB (co-polar)
29 dB (average)
500 watts (at 50°C)
1710–1755 MHz
17.5 dBi
25 dB (co-polar)
28 dB (average)
300 watts (at 50°C)
1850–1990 MHz
17.5 dBi
25 dB (co-polar)
28 dB (average)
300 watts (at 50°C)
2110–2170 MHz
17.5 dBi
25 dB (co-polar)
28 dB (average)
300 watts (at 50°C)
85° (half-power)
85° (half-power)
85° (half-power)
85° (half-power)
85° (half-power)
9.5° (half-power)
8.5° (half-power)
5.5° (half-power)
5.5° (half-power)
5.5° (half-power)
0°–10°
0°–10°
0°–10°
0°–10°
0°–10°
0°
16
17
0°
15
16
0°
16
18
0° 5° 10° T
16 16 16 dB
17 17 18 dB
0°
16
18
5° 10° T
16 18 dB
19 21 dB
5° 10° T
18 18 dB
19 22 dB
5° 10° T
16 16 dB
18 18 dB
5° 10° T
16 16 dB
18 18 dB
22 dB (typical)
10 dB, 16 dB (avg)
24 dB (typical)
10 dB, 16 dB (avg)
18 dB (typical)
10 dB, 12 dB (avg)
18 dB (typical)
8 dB, 12 dB (avg)
18 dB (typical)
10 dB, 12 dB
0.5 dB
4.0°
0.5 dB
4.0°
0.5 dB
4.5°
0.5 dB
4.5°
0.5 dB
4.5°
11408-C
936.4271
13
800 10723V01
85° Dual Band Panel Antenna
RET motor preinstalled specifications
Logical interface ex factory1) 3GPP/AISG 2.0
Protocols
AISG 1.1 and 3GPP/AISG 2.0 compliant
2 x 8pin connector acc. IEC 60130-9
Hardware interface2)
according to AISG:
– RCUin (male): Control / Daisy chain in
– RCUout (female): Daisy chain out
Power supply
10–30 V
Power Consumption
1 W (standby) 8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles
50,000
Temperature range
-40– +60° C
Certification
FCC 15.107 Class B Computing Devices
Replacement number
860 10149 (see page 189)
1)
The protocol of the logical interface can be switched from 3GPP/AISG
2.0 to AISG 1.1 and vice versa with a vendor specific command.
Start-up operation of the RCU 86010149 is possible in an RET
system supporting AISG 1.1 or supporting 3GPP/AISG 2.0 after
performing a layer 2 reset before address assignment. The protocol
can also be changed as follows: AISG 1.1 to 3GPP: Enter “3GPP”
into the additional data filed “Installer’s ID” and perform a layer 7
reset or a power reset. 3GPP to AISG 1.1: Enter “AISG 1” into the
additional datafield “Installer’s ID” and perform a layer 2 reset or a
power reset. After switching the protocol any other information can
be entered into the “Installer’s ID” field.
2)
The tightning torque for fixing the connector must be 0.5 – 1.0 Nm
( hand-tightened’). The connector should be tightened by hand only!
Mechanical specifications
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
Mounting
68.3 lb (31 kg)
72.8 lb (33 kg) clamps included
82.2 lb (37.3 kg) clamps and tilt kit included
93.2 x 11.8 x 6 inches
(2368 x 300 x 152 mm)
at 93 mph (150kph)
273 lbf / 102 lbf / 286 lbf
(1210 N) / (450 N) / (1270 N)
H (Heavy)
150 mph (240 kph)
102.2 x 12.7 x 7.5 inches
(2596 x 322 x 190 mm)
83.1 lb (37.7 kg) clamps included
Mounting hardware included for 2 to 4.6 inch
(50 to 115 mm) OD masts.
KATHREIN
2.625 inches 0.125
(68 mm 4)
96 inches
(2438 mm)
94.4 inches
(2398 mm)
860 10149
93.2 inches
(2368 mm)
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
iRCU out
in
698–894
–45o
iRCU
698–894
+45o
7-16 long neck7-16
8pin male
8pin female
in
out
1710–2170 1710–2170
–45o
+45o
Note: Refer to part number
860 10149 for the
specifications of the
remote control actuator.
6 inches
(152 mm)
7-16 long neck7-16
8pin female
8pin male
11.8 inches
(300 mm)
Order Information
Model
800 10723V01
Description
Dualband antenna with 738 546 mounting bracket
0°–10° // 0°–10° electrical downtilt
Dualband antenna with 738 546 mounting bracket
800 10723V01K
and 850 10008 mechanical tilt bracket
0°–10° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
14
840 10520, 840 10525
65° Dual Band Panel Antenna
Mounting Clamps Included
Dual Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 2
698–894
X
65°
0°
1710–2170
X
65°
0°
698–894 MHz
3
0o
30
0o
0o
10
30
0o
o
60
20
o
60
20
30
30
270o
90o
270o
12
0o
90o
0o
Horizontal pattern
45°- polarization
180o
0o
21
0o
0o
24
15
180o
12
0o
0o
24
21
30
o
o
33
Vertical pattern
45°- polarization
1710–2170 MHz
30
o
0o
3
10
30
0o
6
30
0o
30
12
0o
0o
24
Profile PA3
90o
12
0o
0o
24
180o
0o
15
0o
15
Horizontal pattern
45°- polarization
270o
0o
90o
21
270o
0o
o
60
20
30
21
3
10
0o
20
180o
0o
30
o
0o
33
Shipping weight
30
0o
Wind survival rating
Shipping dimensions
3
10
33
Wind load
Front/Side/Rear
0o
0o
Dimensions
698–894 MHz
1710–2170 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
30 dB
15.9 lb (7.2 kg)
20.3 lb (9.2 kg) clamps included
23.3 x 10.6 x 6.2 inches
(593 x 270 x 157 mm)
at 93 mph (150kph)
37 lbf / 21 lbf / 56 lbf
(163 N) / (92 N) / (245 N)
120 mph (200 kph)
29 x 11.9 x 7.6 inches
(736 x 302 x 192 mm)
23.6 lb (10.7 kg)
15
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Isolation intrasystem
Weight
0o
Frequency range
33
Specifications
Vertical pattern
45°- polarization
840 10520 Dualband Panel Antenna with Integrated Combiner
Specifications
698–806 MHz
Gain
10.8 dBi
Front-to-back ratio 27 dB (co-polar)
Maximum input power
250 watts (at 50°C)
+45° and -45° polarization 72° (half-power)
horizontal beamwidth
+45° and -45° polarization 36° (half-power)
vertical beamwidth
Cross polar ratio (typical)
Main direction
0°
30 dB
Sector
60°
10 dB
Integrated combiner
Connector
824–894 MHz
11.4 dBi
30 dB (co-polar)
250 watts (at 50°C)
69° (half-power)
1710–1755 MHz
12.6 dBi
27 dB (co-polar)
200 watts (at 50°C)
65° (half-power)
1850–1990 MHz
13.2 dBi
27 dB (co-polar)
200 watts (at 50°C)
65° (half-power)
2110–2170 MHz
12.2 dBi
27 dB (co-polar)
200 watts (at 50°C)
75° (half-power)
32° (half-power)
23° (half-power)
19° (half-power)
18° (half-power)
30 dB
10 dB
22 dB
25 dB
10 dB
10 dB
The insertion loss is included in the given antenna gain values
2 x 7-16 DIN female (long neck)
22 dB
10 dB
840 10525 Dualband Panel Antenna
Specifications
Gain
Front-to-back ratio
Maximum input power
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Cross polar ratio (typical)
Main direction
0°
Sector
60°
Connector
698–806 MHz
10.5 dBi
25 dB (co-polar)
250 watts (at 50°C)
71° (half-power)
806–894 MHz
11 dBi
25 dB (co-polar)
250 watts (at 50°C)
68° (half-power)
1710–1755 MHz
13.3 dBi
30 dB (co-polar)
200 watts (at 50°C)
61° (half-power)
1850–1990 MHz
13.5 dBi
30 dB (co-polar)
200 watts (at 50°C)
63° (half-power)
2110–2170 MHz
12.8 dBi
30 dB (co-polar)
200 watts (at 50°C)
70° (half-power)
37° (half-power)
31° (half-power)
19° (half-power)
18° (half-power)
18.5° (half-power)
30 dB
8 dB
30 dB
8 dB
25 dB
25 dB
8 dB
8 dB
4 x 7-16 DIN female (long neck)
25 dB
8 dB
11241-D
11203-C
15
840 10520, 840 10525
65° Dual Band Panel Antenna
840 10520
840 10525
2.625 inches 0.125
(68 mm 4)
2.625 inches 0.125
(68 mm 4)
23.3 inches
(593 mm)
23.3 inches
(593 mm)
25.2 inches
(639 mm)
25.2 inches
(639 mm)
26.7 inches
(679 mm)
26.7 inches
(679 mm)
6.2 inches
(157 mm)
6.2 inches
(157 mm)
10.6 inches
(270 mm)
n
10.6 inches
(270 mm)
1710–2170
n
–45°
–45°
+45°
698–894
Layout of interface
Mounting E uipment
Model
Description
2 x 738 546
Mounting Kit for 2 to 4.6 inch
(included)
(50 to 115 mm) OD mast.
850 10013
Locking Tilt Mount Kit
(optional)
0–34 degrees downtilt angle.
Reference the Mechanical Accessories section.
16
+45°
NEW
800 10753
Integrated Combiner
Mounting Clamps Included
65° Dual Band Panel Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 2
790–960
X
65°
0°
1710–2690
X
65°
0°
General specifications
maximum power
350 watts (790–960 MHz // 1710–2690 MHz)
per combined input
See reverse for order information.
790–960 MHz
0°
90°
12
0°
0°
24
0°
0°
0°
30
0°
18 dB
8 dB
20 dB
8 dB
1710–1990 MHz
7.8 dBi
25 dB (co-polar)
65° (half-power)
1920–2200 MHz
8.9 dBi
25 dB (co-polar)
55° (half-power)
2200–2490 MHz
8.7 dBi
25 dB (co-polar)
60° (half-power)
2490–2690 MHz
8.2 dBi
25 dB (co-polar)
62° (half-power)
75° (half-power)
60° (half-power)
60° (half-power)
65° (half-power)
21
0°
0°
25 dB
10 dB
°
0°
0°
15 dB
8 dB
Horizontal pattern
45°-polarization
12
0°
24
21
65° (half-power)
0°
90°
180°
°
65° (half-power)
12
0°
24
270°
0
15
65° (half-power)
°
60
20
30
90°
180°
3
10
°
60
20
880–960 MHz
8.5 dBi
25 dB (co-polar)
67° (half-power)
0°
30
0°
30
824–894 MHz
8 dBi
25 dB (co-polar)
67° (half-power)
25 dB
10 dB
0°
33
3
10
790–862 MHz
7.8 dBi
25 dB (co-polar)
67° (half-power)
25 dB
10 dB
180°
Vertical pattern
45°-polarization
0°
15
Average gain
Front-to-back ratio
45° polarization
horizontal beamwidth
45° polarization
vertical beamwidth
Cross polar ratio (typical)
Main direction
0°
Sector
60°
15
0°
12
0°
24
1710–2690 MHz
0°
Specifications
°
90°
Horizontal pattern
45°-polarization
270°
Average gain
Front-to-back ratio
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Cross polar ratio (typical)
Main direction
0°
Sector
60°
°
270°
30
Specifications
60
20
30
270°
180°
3
30
°
30
°
30
33
6.2 lb (2.8 kg)
13.1 x 10.2 x 5.7 inches
(334 x 260 x 145 mm)
at 93 mph (150kph)
25 lbf / 13 lbf / 33 lbf
(110 N) / (55 N) / (145 N)
L (Light)
120 mph (200 kph)
19.5 x 10.7 x 6.2 inches
(495 x 272 x 157 mm)
Band clamps for 1.8 to 4.9 inch (45 to 115
mm) OD masts are included.
Fixed and tilt mount options are available for 2
to 4.6 inch (50 to 115 mm) OD masts.
0°
10
60
20
0°
Mounting
0°
30
15
Mounting category
Wind survival rating
Shipping dimensions
30
21
Wind load
Front/Side/Rear
0°
10
Mechanical specifications
Weight
Dimensions
33
3
0°
33
0°
21
Maximum input power
(at 50°C)
790–960 MHz // 1710–2690 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
intrasystem 30 dB (790–960 MHz)
intrasystem 30 dB (1710–2200 MHz)
intrasystem 27 dB (2200–2490 MHz)
intrasystem 25 dB (2490–2690 MHz)
250 watts (790–960 MHz)
100 watts (1710–2690 MHz)
30
°
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
Vertical pattern
45°-polarization
25 dB
10 dB
11440-A
936.4450/a
17
800 10753
65° Dual Band Panel Antenna
Integrated Combiner
2.52 inches
(64 mm)
14.6 inches
(370 mm)
13.1 inches
(334 mm)
734 365 Mounting Kit
(included)
Mounting Options
Model
734 365
(included)
Description
Mounting Kit for 1.8 to 4.9 inch
(45 to 125 mm) OD mast.
3.8 inches
(96 mm)
10.2 inches
(260 mm)
5.7 inches
(145 mm)
1710–2690 MHz 1710–2690 MHz
790– 960 MHz 790– 960 MHz
–45°
+45°
Layout of interface
1710 –2690
–45°
7 16
790–960
–45°
790–960
+45°
1710–2690
+45°
7 16
Mounting E uipment
Model
Description
734 365
Mounting Kit for 1.8 to 4.9 inch
(included)
(45 to 125 mm) OD mast.
Reference the Mechanical Accessories section.
18
742 226V01
65° Dual Band Panel Antenna
Mounting Clamps Included
Dual Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 2
790–960
X
65°
0°
1710–2170
X
65°
0°
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
790–960 MHz
1710–2170 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female
30 dB
42 dB (790–960 // 1710–2170 MHz)
16.5 lb (7.5 kg)
20.9 lb (9.5 kg) clamps included
22.8 x 10.3 x 5.5 inches
(579 x 262 x 139 mm)
at 93 mph (150kph)
45 lbf / 21 lbf / 57 lbf
(200 N) / (90 N) / (250 N)
M (Medium)
120 mph (200 kph)
29.8 x 11.1 x 6.8 inches
(756 x 282 x 172 mm)
25.4 lb (11.5 kg)
790–960 MHz
Horizontal pattern
45°- polarization
Specifications
1710–2170 MHz
Vertical pattern
45°- polarization
790–862 MHz
Gain
11.1 dBi
Front-to-back ratio (180° 30°)
co-polar
23 dB
total power
20 dB
Maximum power per input 250 watts (at 50°C)
+45° and -45° polarization 68° (half-power)
horizontal beamwidth
+45° and -45° polarization 34° (half-power)
vertical beamwidth
Cross polar ratio
Main direction
0°
25 dB (typical)
Sector
60°
10 dB
Tracking, average
Squint
Profile PA2
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
824–894 MHz
11.4 dBi
880–960 MHz
11.8 dBi
1710–1880 MHz
12.8 dBi
1850–1990 MHz
13.3 dBi
1920–2170 MHz
13.6 dBi
23 dB
20 dB
250 watts (at 50°C)
67° (half-power)
25 dB
22 dB
250 watts (at 50°C)
65° (half-power)
25 dB
22 dB
200 watts (at 50°C)
66° (half-power)
25 dB
25 dB
22 dB
22 dB
200 watts (at 50°C) 200 watts (at 50°C)
60° (half-power)
60° (half-power)
33° (half-power)
30° (half-power)
20° (half-power)
18° (half-power)
17.5° (half-power)
25 dB (typical)
10 dB
1 dB
3°
25 dB (typical)
10 dB
16 dB (typical)
10 dB
18 dB (typical)
10 dB
0.5 dB
1.5°
20 dB (typical)
10 dB
11316-B
936.3967/d
19
742 226V01
65° Dual Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
22.8 inches
(579 mm)
24.8 inches
(630 mm)
26.4 inches
(670 mm)
5.5 inches
(139 mm)
10.3 inches
(262 mm)
1710–2170
–45o
+45o
–45o
+45o
790–960
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Locking Tilt Mount Kit
(optional)
0–34 degrees downtilt angle.
Reference the Mechanical Accessories section.
20
742 222V01
Integrated Combiner
Mounting Clamps Included
65° Dual Band Panel Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 2
790–960
X
65°
0°
1710–2170
X
65°
0°
General specifications
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
790–960 MHz
1710–2170 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
30 dB
16.5 lb (7.5 kg)
20.9 lb (9.5 kg) clamps included
22.8 x 10.3 x 5.5 inches
(579 x 262 x 139 mm)
at 93 mph (150kph)
45 lbf / 21 lbf / 57 lbf
(200 N) / (90 N) / (250 N)
M (Medium)
120 mph (200 kph)
29.8 x 11.1 x 6.8 inches
(756 x 282 x 172 mm)
24.3 lb (11 kg)
1710–2170 MHz
790–960 MHz
Horizontal pattern
45°- polarization
Specifications
Gain
Front-to-back ratio
(180° 30°)
Maximum input power
Maximum combined power
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Cross polar ratio
Main direction
0°
Sector
60°
Integrated combiner
Profile PA2
Vertical pattern
45°- polarization
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
790–862 MHz
824–894 MHz
880–960 MHz
1710–1880 MHz
11.1 dBi
11.4 dBi
11.8 dBi
12.5 dBi
23 dB (co-polar)
25 dB (co-polar)
25 dB (co-polar)
23 dB (co-polar)
20 dB (total power) 20 dB (total power) 22 dB (total power)
22 dB (total power)
250 watts (at 50°C) 250 watts (at 50°C) 250 watts (at 50°C)
200 watts (at 50°C)
450 watts per input (at 50°C)
68° (half-power)
67° (half-power)
65° (half-power)
66° (half-power)
1850–1990 MHz
1920–2170 MHz
13.3 dBi
13.6 dBi
25 dB (co-polar)
25 dB (co-polar)
22 dB (total power) 22 dB (total power)
200 watts (at 50°C) 200 watts (at 50°C)
60° (half-power)
60° (half-power)
34° (half-power)
33° (half-power)
18° (half-power)
17.5° (half-power)
25 dB (typical)
10 dB
25 dB (typical)
25 dB (typical)
18 dB (typical)
18 dB (typical)
10 dB
10 dB
10 dB
10 dB
The insertion loss is included in the given antenna gain values
30° (half-power)
20° (half-power)
20 dB (typical)
10 dB
11357-B
936.4059/a
21
742 222V01
65° Dual Band Panel Antenna
Integrated Combiner
2.625 inches 0.125
(68 mm 4)
22.8 inches
(579 mm)
24.8 inches
(630 mm)
26.4 inches
(670 mm)
5.5 inches
(139 mm)
10.3 inches
(262 mm)
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–34 degrees downtilt angle.
Reference the Mechanical Accessories section.
22
NEW
800 10771
65° Dual Band Panel Antenna
Mounting Clamps Included
Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
790–960
X
65°
1710–2180
X
65°
0°–10°
0°–6°
General specifications
0°
0°
270°
90°
0°
90°
12
0°
24
0°
0°
21
180°
0°
15
180°
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
0°–10° electrical downtilt
1710–2180 MHz
30
10
30
0°
10
30
°
60
20
0°
270°
12
°
90°
12
0°
0°
0°
24
0°
21
Horizontal pattern
45°-polarization
180°
0°
0°
180°
15
15
0°
60
20
30
90°
21
3
0
0°
3
°
0°
0°
Vertical pattern
45°-polarization
0°–6° electrical downtilt
790–862 MHz
0° 5° 10° T
15.4 15.5 15.2
27 dB (co-polar)
880–960 MHz
0° 5° 10° T
15.8 16 15.4
28 dB (co-polar)
1710–1880 MHz
0°
3° 6° T
18.3 18.5 18.2
30 dB (co-polar)
69° (half-power)
67° (half-power)
11° (half-power) 10.7° (half-power)
0°–10°
0°–10°
(manual or optional remote control)
0° 5° 10° T
0° 5° 10° T
17 17 17 dB
17 17 18 dB
65° (half-power)
10° (half-power)
0°–10°
65° (half-power)
5° (half-power)
0°–6°
0° 5° 10° T
17 17 16 dB
0°
16
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
1.5 dB
3°
°
270°
0°
12
0°
24
24
824–894 MHz
0° 5° 10° T
15.5 15.8 15.3
28 dB (co-polar)
500 watts (per input)
1000 watts (total power)
°
30
270°
Gain (average)
(dbi)
Front-to-back ratio
Maximum input power
(at 50°C)
+45° and -45° polarization
horizontal beamwidth
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
Tracking, average
Squint
60
20
30
30
Specifications
30
°
30
10
30
°
60
20
33
Mounting category
Wind survival rating
Shipping dimensions
0°
Wind load
Front/Side/Rear
30
0°
Dimensions
3
10
15
Weight
3
0°
33
intrasystem
intersystem
0°
Isolation
790–960 MHz
0°
33
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female
rearside (see illustration on reverse)
30 dB
30 dB (790–960 // 1710–2180 MHz)
33.1 lb (15 kg)
37.5 lb (17 kg) clamps included
76.1 x 10.2 x 5.5 inches
(1934 x 260 x 140 mm)
at 93 mph (150kph)
153 lbf / 86 lbf / 201 lbf
(680 N) / (380 N) / (890 N)
M (Medium)
120 mph (200 kph)
88.8 x 10.7 x 6 inches
(2256 x 272 x 152 mm)
21
Frequency range
3° 6° T
15 14 dB
1850–1990 MHz
0° 3° 6° T
18.5 18.7 18.3
30 dB (co-polar)
250 watts (per input)
500 watts (total power)
1920–2180 MHz
0°
3° 6° T
18.2 18.6 18.2
30 dB (co-polar)
62° (half-power)
4.8° (half-power)
0°–6°
62° (half-power)
4.6° (half-power)
0°–6°
0° 3° 6° T
17 16 15 dB
0°
17
25 dB (typical)
10 dB
0.5 dB
2.5°
25 dB (typical)
10 dB
11414-B
936.4184/a
3° 6° T
16 15 dB
23
800 10771
65° Dual Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
etai
790–960
1710–2180
ee etai
76.1 inches
(1934 mm)
73 inches
(1854 mm)
60
–9
1710–
21
Tilt 790
80
Tilt
10.2 inches
(260 mm)
5.5 inches
(140 mm)
790– 960
–45°
790– 960
+45°
1710 –21 0
–45°
1710 –21 0
+45°
7 16
7 16
7 16
7 16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
24
NEW
800 10772
65° Dual Band Panel Antenna
Mounting Clamps Included
Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
790–960
X
65°
1710–2180
X
65°
0°–8°
0°–6°
General specifications
30
0°
0°
90°
270°
0°
0°
21
Horizontal pattern
45°- polarization
Vertical pattern
45°-polarization
0°–8° electrical downtilt
1710–2180 MHz
10
10
30
°
60
20
0°
270°
12
0°
0°
24
0°
0°
21
180°
0°
0°
Horizontal pattern
45°-polarization
12
0°
24
15
0°
°
90°
15
21
60
20
30
90°
180°
3
30
°
°
30
0°
0°
3
0°
33
0°
270°
Vertical pattern
45°-polarization
0°–6° electrical downtilt
790–862 MHz
0° 4° 8° T
16.6 16.8 16.6
30 dB (co-polar)
880–960 MHz
0° 4° 8° T
16.8 17 16.7
30 dB (co-polar)
1710–1880 MHz
0°
3° 6° T
18.4 18.5 18
30 dB (co-polar)
68° (half-power)
67° (half-power)
8° (half-power)
7.9° (half-power)
0°–8°
0°–8°
(manual or optional remote control)
0° 4° 8° T
0° 4° 8° T
16 17 16 dB
15 17 18 dB
65° (half-power)
7.6° (half-power)
0°–8°
65° (half-power)
5° (half-power)
0°–6°
0° 4° 8° T
15 17 18 dB
0°
17
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
1.5 dB
3°
180°
0°
0°
0°
24
15
180°
12
0°
12
0°
24
90°
30
824–894 MHz
0° 4° 8° T
16.8 17 16.7
30 dB (co-polar)
500 watts (per input)
1000 watts (total power)
°
30
270°
0°
Gain (average)
(dbi)
Front-to-back ratio
Maximum input power
(at 50°C)
+45° and -45° polarization
horizontal beamwidth
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
Tracking, average
Squint
60
20
30
30
Specifications
30
°
30
°
10
30
°
60
20
33
Mounting category
Wind survival rating
Shipping dimensions
3
0°
Wind load
Front/Side/Rear
0°
10
0°
Dimensions
3
15
Weight
0°
33
intrasystem
intersystem
0°
Isolation
790–960 MHz
33
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female
rearside (see illustration on reverse)
30 dB
30 dB (790–960 // 1710–2180 MHz)
37.5 lb (17 kg)
41.9 lb (19 kg) clamps included
94.4 x 10.2 x 5.5 inches
(2399 x 260 x 140 mm)
at 93 mph (150kph)
189 lbf / 108 lbf / 261 lbf
(840 N) / (480 N) / (1160 N)
H (Heavy)
120 mph (200 kph)
106.9 x 10.7 x 6 inches
(2715 x 272 x 152 mm)
21
Frequency range
3° 6° T
16 15 dB
1850–1990 MHz
0° 3° 6° T
18.5 18.7 18.1
30 dB (co-polar)
250 watts (per input)
500 watts (total power)
1920–2180 MHz
0°
3° 6° T
18.4 18.6 18
30 dB (co-polar)
62° (half-power)
4.8° (half-power)
0°–6°
62° (half-power)
4.6° (half-power)
0°–6°
0° 3° 6° T
17 16 15 dB
0°
17
25 dB (typical)
10 dB
0.5 dB
2.5°
25 dB (typical)
10 dB
11415-C
936.4252/a
3° 6° T
16 15 dB
25
800 10772
65° Dual Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
etai
790–960
1710–2180
ee etai
94.4 inches
(2399 mm)
91.3 inches
(2319 mm)
60
–9
1 710–2
1
Tilt 79 0
80
Til t
10.2 inches
(260 mm)
5.5 inches
(140 mm)
790– 960
–45°
790– 960
+45°
1710 –21 0
–45°
1710 –21 0
+45°
7 16
7 16
7 16
7 16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–9 degrees downtilt angle.
Reference the Mechanical Accessories section.
26
800 10486V01
65° Dual Band Panel Antenna
Mounting Clamps Included
Antenna 1
Antenna 2
790–960
X
65°
1710–2180
X
65°
4°–12°
4°–14°
Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
790–960 MHz
30
o
10
30
0o
o
60
20
30
270o
90o
270o
12
0o
0o
24
90o
180o
12
0o
0o
24
21
0o
21
0o
o
60
20
30
Horizontal pattern
45°- polarization
180o
Vertical pattern
45°- polarization
4°–12° electrical downtilt
1710–2180 MHz
30
o
3
10
30
0o
o
60
20
30
30
270o
90o
12
0o
0o
24
270o
12
0o
21
0o
180o
0o
15
Horizontal pattern
45°- polarization
90o
0o
24
0o
15
21
0o
3
10
30
0o
o
60
20
180o
0o
30
o
0o
0o
33
Shipping weight
30
0o
0o
33
Mounting category
Wind survival rating
Shipping dimensions
3
10
0o
15
Wind load
Front/Side/Rear
3
0o
0o
33
Dimensions
0o
0o
15
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
Weight
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -153 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
30 dB
45 dB (790–960 // 1710–2180 MHz)
61.2 lb (28 kg)
66.1 lb (30 kg) clamps included
99.1 x 10.3 x 5.5 inches
(2516 x 262 x 139 mm)
at 93 mph (150kph)
207 lbf / 104 lbf / 259 lbf
(920 N / 460 N / 1150 N)
H (Heavy)
120 mph (200 kph)
111.3 x 11.1 x 6.8 inches
(2826 x 282 x 172 mm)
72.8 lb (33 kg)
0o
33
Frequency range
30
o
General specifications
Vertical pattern
45°- polarization
4°–14° electrical downtilt
Profile PA2
Specifications
790–862 MHz
824–894 MHz
Gain (average)
4° 8° 12° T
4° 8° 12° T
(dbi)
16.8 16.7 16.6
17 16.8 16.8
Front-to-back ratio
25 dB
25 dB
(180° 30°)
Maximum input power
400 watts (per input)
(at 50°C)
800 watts (total power)
+45° and -45° polarization
horizontal beamwidth
68° (half-power)
67° (half-power)
vertical beamwidth
7.5° (half-power) 7.4° (half-power)
Electrical downtilt
4°–12°
4°–12°
continuously adjustable
(manual or optional remote control)
Sidelobe suppression for
4° 8° 12° T
4° 8° 12° T
first sidelobe above main beam 18 17 16 dB
19 18 18 dB
within 0°–20° sector above horizon 15 15 14 dB
16 15 14 dB
Cross polar ratio
Main direction
0°
23 dB (typical)
24 dB (typical)
Sector
60°
10 dB
10 dB
880–960 MHz
4° 8° 12° T
17.2 17 16.8
25 dB
1710–1880 MHz
4°
9° 14° T
17.8 18.1 17.5
25 dB
1850–1990 MHz
4° 9° 14° T
18.3 18.3 17.8
25 dB
1920–2180 MHz
4°
9° 14° T
18.7 18.7 18
25 dB
250 watts (per input)
500 watts (total power)
66° (half-power)
7.2° (half-power)
4°–12°
66° (half-power)
5° (half-power)
4°–14°
4° 8° 12° T
19 18 18 dB
16 15 14 dB
4°
20
17
25 dB (typical)
10 dB
18 dB (typical)
10 dB
9° 14° T
18 16 dB
17 15 dB
64° (half-power)
4.8° (half-power)
4°–14°
61° (half-power)
4.6° (half-power)
4°–14°
4° 9° 14° T
19 19 16 dB
17 17 15 dB
4°
18
17
18 dB (typical)
10 dB
20 dB (typical)
10 dB
11335-C
936.3950/b
9° 14° T
18 18 dB
17 15 dB
27
800 10486V01
65° Dual Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
99.1 inches
(2516 mm)
101.1 inches
(2567 mm)
102.6 inches
(2607 mm)
5.5 inches
(139 mm)
10.3 inches
(262 mm)
1710–2180
–45o +45o
RCU
RCU
1710–2180 –45o +45o 790–960
790–960
Layout of interface
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
28
800 10485V01
65° Dual Band Panel Antenna
Mounting Clamps Included
Dual Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
790–960
X
65°
1710–2180
X
65°
2°–14°
4°–14°
Adj. Electrical Downtilt
Manual, or optional remote control
General specifications
30
o
3
0o
0o
10
60
20
o
30
0o
30
270o
90o
270o
12
0o
90o
12
0o
0o
24
0o
24
Horizontal pattern
45°- polarization
0o
0o
21
0o
15
0o
o
60
20
30
180o
30
o
0o
33
30
180o
Vertical pattern
45°- polarization
2°–14° electrical downtilt
1710–2180 MHz
0o
60
20
o
30
0o
90o
12
0o
270o
90o
12
0o
0o
24
21
0o
Horizontal pattern
45°- polarization
0o
15
15
0o
0o
24
0o
o
30
270o
21
60
20
30
180o
3
10
10
30
0o
o
30
o
0o
3
30
0o
33
0o
Shipping weight
3
10
33
Mounting category
Wind survival rating
Shipping dimensions
0o
15
Wind load
Front/Side/Rear
0o
Dimensions
33
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
Weight
790–960 MHz
790–960 MHz
1710–2180 MHz
1.5:1
50 ohms
IM3: -153 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
30 dB
35 dB (790–960 // 1710–2180 MHz)
52.9 lb (24 kg)
57.3 lb (26 kg) clamps included
80.2 x 10.3 x 5.5 inches
(2038 x 262 x 139 mm)
at 93 mph (150kph)
169 lbf / 86 lbf / 203 lbf
(750 N) / (380 N) / (900 N)
M (Medium)
120 mph (200 kph)
92.8 x 11.1 x 6.8 inches
(2356 x 282 x 172 mm)
61.7 lb (28 kg)
21
Frequency range
180o
Vertical pattern
45°- polarization
4°–14° electrical downtilt
Profile PA2
Specifications
Average gain (dBi)
790–862 MHz
2°
8° 14° T
16.2 16 15.7
25 dB
Front-to-back ratio
(180° 30°)
Maximum input power
per input (at 50°C)
total (at 50°C)
+45° and -45° polarization 68° (half-power)
horizontal beamwidth
+45° and -45° polarization 10° (half-power)
vertical beamwidth
Electrical downtilt
2°–14°
continuously adjustable
Sidelobe suppression for 2° 8° 14° T
first sidelobe above main beam 17 17 15 dB
Cross polar ratio
Main direction
0°
25 dB (typical)
Sector
60°
10 dB
824–896 MHz
2°
8° 14° T
16.3 16.1 15.8
25 dB
880–960 MHz
2°
8° 14° T
16.4 16.2 15.8
25 dB
1710–1880 MHz
4°
9° 14° T
18 18.2 17.7
25 dB
1850–1990 MHz
4°
9° 14° T
18.4 18.5 17.8
25 dB
1920–2180 MHz
4°
9° 14° T
18.7 18.6 18
25 dB
60° (half-power)
790–960 MHz
400 watts
800 watts
67° (half-power)
65° (half-power)
66° (half-power)
1710–2180 MHz
250 watts
500 watts
64° (half-power)
9.7° (half-power)
9.3° (half-power)
5° (half-power)
4.7° (half-power)
4.5° (half-power)
2°–14°
2°–14°
4°–14°
4°–14°
4°–14°
2° 8° 14° T
17 17 16 dB
2°
17
4°
20
25 dB (typical)
10 dB
8° 14° T
17 16 dB
25 dB (typical)
10 dB
9°
18
14° T
15 dB
20 dB (typical)
10 dB
4°
19
9°
18
14° T
15 dB
20 dB (typical)
10 dB
11334-A
936.3949/a
4°
18
9°
17
14° T
15 dB
21 dB (typical)
10 dB
29
800 10485V01
65° Dual Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
80.2 inches
(2038 mm)
82.2 inches
(2089 mm)
83.8 inches
(2129 mm)
5.5 inches
(139 mm)
10.3 inches
(262 mm)
1710–2180
–45o +45o
RCU
RCU
1710–2180 –45o +45o 790–960
790–960
Layout of interface
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
30
742 264V02
65° Dual Band Panel Antenna
Mounting Clamps Included
Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
790–960
X
65°
1710–2180
X
65°
0°–14°
0°–8°
790–960 MHz
o
30
0o
o
270o
90o
12
0o
270o
90o
0o
24
0o
21
Horizontal pattern
45°- polarization
180o
0o
15
0o
12
0o
0o
24
21
o
60
20
30
Vertical pattern
45°- polarization
0°–14° electrical downtilt
1710–2180 MHz
0o
0o
6
30
270o
90o
12
0o
0o
270o
90o
Profile PA5
12
0o
0o
24
0o
21
0o
180o
0o
15
0o
o
60
20
30
21
30
30
o
30
0o
20
180o
3
10
10
30
o
0o
0o
3
33
0o
15
824–894 MHz
0° 7° 14° T
14.3 14.2 13.8
30 dB (co-polar)
500 watts (per input)
1000 watts (total power)
30
30
180o
3
10
60
20
Horizontal pattern
45°- polarization
Gain (average)
(dbi)
Front-to-back ratio
Maximum input power
(at 50°C)
+45° and -45° polarization
horizontal beamwidth
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
(average)
Cross polar ratio
Main direction
0°
Sector
60°
Tracking (average)
Squint
0o
0o
24
Specifications
33
30
0o
Shipping weight
0o
10
33
Mounting category
Wind survival rating
Shipping dimensions
3
0o
Wind load
Front/Side/Rear
0o
15
Dimensions
0o
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
intersystem
Weight
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
30 dB
45 dB
Typ. 50 dB (790–960 // 1710–2180 MHz)
35.3 lb (16 kg)
39.7 lb (18 kg) clamps included
52.5 x 10.3 x 5.7 inches
(1334 x 261 x 146 mm)
at 93 mph (150kph)
126 lbf / 59 lbf / 135 lbf
(560 N) / (260 N) / (600 N)
M (Medium)
120 mph (200 kph)
64.8 x 11.1 x 7.2 inches
(1646 x 282 x 182 mm)
48.5 lb (22 kg)
33
Frequency range
30
o
General specifications
Vertical pattern
45°- polarization
0°–8° electrical downtilt
790–862 MHz
0° 7° 14° T
14.1 14.1 13.7
30 dB (co-polar)
880–960 MHz
0° 7° 14° T
14.5 14.4 13.9
30 dB (co-polar)
1710–1880 MHz
0°
4° 8° T
17.1 17.3 17.1
32 dB (co-polar)
68° (half-power)
67° (half-power)
16.5° (half-power) 16° (half-power)
0°–14°
0°–14°
(manual or optional remote control)
0° 7° 14° T
0° 7° 14° T
17 16 15 dB
19 18 18 dB
65° (half-power)
15.3° (half-power)
0°–14°
65° (half-power)
7.4° (half-power)
0°–8°
62° (half-power)
7.1° (half-power)
0°–8°
61° (half-power)
6.7° (half-power)
0°–8°
0° 7° 14° T
17 18 17 dB
0°
17
0° 4° 8° T
15 15 15 dB
0°
16
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
0.5 dB
3°
25 dB (typical)
10 dB
25 dB (typical)
10 dB
1 dB
2°
1850–1990 MHz
0° 4° 8° T
17.2 17.4 17.1
32 dB (co-polar)
250 watts (per input)
500 watts (total power)
4° 8° T
17 16 dB
11349-B
936.3839/e
1920–2180 MHz
0°
4° 8° T
17.3 17.5 17.2
32 dB (co-polar)
4° 8° T
16 15 dB
31
742 264V02
65° Dual Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
52.5 inches
(1334 mm)
53.8 inches
(1367 mm)
55.3 inches
(1405 mm)
5.7 inches
(146 mm)
10.3 inches
(261 mm)
790–960
–45°
790–960
+45°
1710 –21 0
–45°
1710 –21 0
+45°
7 16
7 16
7 16
7 16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
32
742 223V02
Integrated Combiner
Mounting Clamps Included
65° Dual Band Panel Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
790–960
X
65°
1710–2180
X
65°
0°–14°
0°–8°
790–960 MHz
10
270o
90o
270o
12
0o
o
0o
0o
0o
21
0o
12
24
15
180o
90o
0o
0o
24
21
60
20
30
180o
Vertical pattern
45°- polarization
0°–14° electrical downtilt
Horizontal pattern
45°- polarization
1710–2180 MHz
10
30
0o
30
0o
30
12
0o
0o
24
270o
90o
12
0o
0o
24
15
0o
90o
0o
21
270o
0o
o
60
20
30
21
3
10
o
60
20
180o
0o
30
o
30
o
0o
3
33
0o
0o
dBi
Front-to-back ratio
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
Maximum input power (at 50°C)
per combined input
Tracking, average
Squint
0o
30
15
Gain
30
o
60
20
Horizontal pattern
45°- polarization
Specifications
3
0o
30
o
33
0o
0o
Shipping weight
Integrated combiner
30
33
Mounting category
Wind survival rating
Shipping dimensions
0o
10
0o
Wind load
Front/Side/Rear
3
15
Dimensions
0o
0o
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
Weight
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female (long neck)
30 dB
34.2 lb (15.5 kg)
38.1 lb (17.3.kg) clamps included
52.5 x 10.3 x 5.7 inches
(1334 x 261 x 146 mm)
at 93 mph (150kph)
126 lbf / 59 lbf / 135 lbf
(560 N) / (260 N) / (600 N)
M (Medium)
120 mph (200 kph)
64.8 x 11.1 x 7.2 inches
(1646 x 282 x 182 mm)
43.7 lb (19.8 kg)
The insertion loss is included in the given
antenna gain values.
33
Frequency range
30
o
General specifications
180o
Profile PA5
Vertical pattern
45°- polarization
0°–8° electrical downtilt
790–862 MHz
0°
7° 14° T
14.1 14.1 13.7 dBi
880–960 MHz
0°
7° 14° T
14.5 14.4 13.9 dBi
1710–1880 MHz
0°
4°
8° T
17.1 17.3 17.1 dBi
1850–1990 MHz
0°
4°
8° T
17.2 17.4 17.1 dBi
1900–2180 MHz
0°
4°
8° T
17.3 17.5 17.2
30 dB (co-polar)
68° (half-power)
30 dB (co-polar)
65° (half-power)
32 dB (co-polar)
65° (half-power)
32 dB (co-polar)
62° (half-power)
32 dB (co-polar)
61° (half-power)
16.5° (half-power)
15.3° (half-power)
7.4° (half-power)
7.1° (half-power)
6.7° (half-power)
0°–8°
0°–8°
0°–8°
0° 4° 8° T
17 17 16 dB
0° 4° 8° T
15 15 15 dB
0° 4° 8° T
16 16 15 dB
0°–14°
0°–14°
(manual or optional remote control)
0° 7° 14° T
0° 7° 14° T
17 16 15 dB
17 18 17 dB
25 dB (typical)
25 dB (typical)
25 dB (typical)
25 dB (typical)
10 dB
10 dB
10 dB
10 dB
250 watts (790–960 MHz)
200 watts (1710–2180 MHz)
450 watts (790–960 MHz and 1710–2180 MHz)
1.0 dB
0.5 dB
2.0°
3.0°
25 dB (typical)
10 dB
11360-A
936.3900/b
33
742 223V02
65° Dual Band Panel Antenna
Integrated Combiner
2.625 inches 0.125
(68 mm 4)
52.5 inches
(1334 mm)
53.8 inches
(1367 mm)
55.3 inches
(1405 mm)
5.7 inches
(146 mm)
10.3 inches
(261 mm)
1710–2180
–45o
790–960
–45o
1710–2180
+45o
790–960
+45o
C
C
7-16
7-16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
34
NEW
800 10664
65° Dual Band Panel Antenna
Mounting Clamps Included
Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
790–960
X
65°
1710–2690
X
65°
0°–16°
2°–10°
General specifications
790–960 MHz
3
°
0°
30
0°
33
10
30
0°
°
60
20
30
270°
90°
12
0°
0°
24
180°
0°
15
0°
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
790–960 MHz
1710–2690 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female
intrasystem 30 dB (790–960 MHz)
intrasystem 28 dB (1710–2170 MHz)
intrasystem 30 dB (2490–2690 MHz)
intersystem 30 dB (790–960 // 1710–2690 MHz)
21
Frequency range
Horizontal pattern
45°- polarization
0°
3
30
°
880–960 MHz
14.8 14.6 14.4
0° 8° 16°
25 dB (co-polar)
0°
10
30
0°
60
20
°
30
270°
90°
12
0°
0°
24
67° (half-power)
0°
21
180°
0°
15
Vertical pattern
45°- polarization
0°–16° electrical downtilt
15.5° (half-power)
0°–16°
Profile PA4
0° 8° 16° T
15 15 14 dB
1710–2690 MHz
0°
0°
3
30
°
25 dB
8 dB
33
790–862 MHz
824–894 MHz
Average gain (dBi)
14.5 14.4 14.2
14.6 14.5 14.3
Tilt
0° 8° 16°
0° 8° 16°
Front-to-back ratio
25 dB (co-polar)
25 dB (co-polar)
(180° 30°)
Maximum input power
500 watts (per input)
(at 50°C)
1000 watts (total power)
+45° and -45° polarization 69° (half-power)
68° (half-power)
horizontal beamwidth
+45° and -45° polarization 16.5° (half-power)
16° (half-power)
vertical beamwidth
Electrical downtilt
0°–16°
0°–16°
continuously adjustable
(manual or optional remote control)
Min. suppression for first
0° 8° 16° T
0° 8° 16° T
sidelobe above main beam 16 15 15 dB
16 15 15 dB
Cross polar ratio (typical)
Main direction
0°
25 dB
25 dB
Sector
60°
10 dB
9 dB
33
Specifications
10
30
0°
60
20
°
30
2490–2690 MHz
17.2 17.3 16.7
2°
5° 10°
25 dB (co-polar)
270°
90°
12
0°
0°
24
180°
0°
21
0°
Horizontal pattern
45°- polarization
250 watts (per input)
500 watts (total power)
64° (half-power)
66° (half-power)
65° (half-power)
5.8° (half-power)
4.8° (half-power)
0°
3
30
°
1920–2170 MHz
17.6 17.7 17
2° 5° 10°
29 dB (co-polar)
15
1850–1990 MHz
17.4 17.4 16.9
2° 5° 10°
28 dB (co-polar)
0°
33
10
5.2° (half-power)
30
0°
60
20
°
30
2°–10°
2°–10°
2° 5° 10° T
14 15 17 dB
2°
5° 10° T
15 16 17 dB
2° 5° 10° T
15 17 18 dB
270°
90°
12
0°
0°
24
0°
2°–10°
20 dB
10 dB
23 dB
8 dB
180°
0°
20 dB
10 dB
15
1710–1880 MHz
Average gain (dBi)
17.2 17.3 16.8
Tilt
2° 5° 10°
Front-to-back ratio
25 dB (co-polar)
(180° 30°)
Maximum input power
(at 50°C)
+45° and -45° polarization 63° (half-power)
horizontal beamwidth
+45° and -45° polarization 6.2° (half-power)
vertical beamwidth
Electrical downtilt
2°–10°
continuously adjustable
(manual or optional remote control)
Min. suppression for first
2° 5° 10° T
sidelobe above main beam 14 15 16 dB
Cross polar ratio (typical)
Main direction
0°
18 dB
Sector
60°
9 dB
21
Specifications
Vertical pattern
45°- polarization
2°–10° electrical downtilt
11410-B
936.4339/a
35
800 10664
65° Dual Band Panel Antenna
Mechanical specifications
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Mounting
39.7 lb (18 kg)
44.1 lb (20 kg) clamps included
55.2 x 11.8 x 6 inches
(1403 x 300 x 152 mm)
at 93 mph (150kph)
156 lbf / 61 lbf / 162 lbf
(690 N) / (270 N) / (720 N)
M (Medium)
120 mph (200 kph)
68 x 12.7 x 7.5 inches
(1726 x 322 x 190 mm)
Fixed mounts for 2 to 4.6 inch (50 to 115 mm)
OD masts are included.
2.625 inches 0.125
(68 mm 4)
58 inches
(1473 mm)
56.4 inches
(1433 mm)
55.2 inches
(1403 mm)
6 inches
(152 mm)
11.8 inches
(300 mm)
790–960
–45°
790–960
+45°
1710–2690
–45°
1710–2690
+45°
7 16
7 16
7 16
7 16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
36
742 265V02
65° Dual Band Panel Antenna
Mounting Clamps Included
Antenna 1
Antenna 2
HPBW
790–960
X
65°
1710–2180
X
65°
Adj. Electrical Downtilt
0.5°–9.5°
0°–6°
Dual Band (MHz)
Dual Polarization
Manual, or optional remote control
790–960 MHz
3
0o
30
o
33
0o
10
30
o
60
20
0o
90o
270o
12
0o
90o
0o
24
0o
21
Horizontal pattern
45°- polarization
180o
0o
15
0o
12
0o
0o
24
21
o
30
270o
180o
60
20
30
0o
Vertical pattern
45°- polarization
0.5°–9.5° electrical downtilt
1710–2180 MHz
0o
o
60
20
30
0o
12
0o
0o
24
270o
90o
12
0o
0o
24
0o
21
0o
Horizontal pattern
45°- polarization
180o
0o
15
15
0o
o
30
90o
21
60
20
30
270o
180o
3
10
10
30
0o
o
30
o
0o
3
30
0o
33
Shipping weight
30
0o
Mounting category
Wind survival rating
Shipping dimensions
0o
10
33
Wind load
Front/Side/Rear
3
15
Dimensions
0o
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
intersystem
Weight
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
30 dB
45 dB (typical)
50 dB (790–960 // 1710–2180 MHz)
44.1 lb (20 kg)
48.5 lb (22.kg) clamps included
76.1 x 10.3 x 5.7 inches
(1933 x 261 x 146 mm)
at 93 mph (150kph)
192 lbf / 86 lbf / 205 lbf
(850 N) / (380 N) / (910 N)
M (Medium)
120 mph (200 kph)
88.8 x 11.1 x 7.2 inches
(2256 x 282 x 182 mm)
59.5 lb (27 kg)
33
Frequency range
0o
30
o
General specifications
Vertical pattern
45°- polarization
0°–6° electrical downtilt
Profile PA5
Specifications
Gain (average)
(dbi)
Front-to-back ratio
Maximum input power
(at 50°C)
+45° and -45° polarization
horizontal beamwidth
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
(average)
Cross polar ratio
Main direction
0°
Sector
60°
Tracking (average)
Squint
790–862 MHz
0.5° 5° 9.5° T
15.6 15.5 15.3
27 dB (co-polar)
824–894 MHz
0.5° 5° 9.5° T
15.9 15.8 15.5
28 dB (co-polar)
500 watts (per input)
1000 watts (total power)
880–960 MHz
0.5° 5° 9.5° T
16.1 16.0 15.6
28 dB (co-polar)
1710–1880 MHz
0°
3° 6° T
18.2 18.5 18.3
30 dB (co-polar)
68° (half-power)
67° (half-power)
10.9° (half-power) 10.6° (half-power)
0.5°–9.5°
0.5°–9.5°
(manual or optional remote control)
0.5° 5° 9.5° T
0.5° 5° 9.5° T
15 16 17 dB
15 17 19 dB
65° (half-power)
10° (half-power)
0.5°–9.5°
65° (half-power)
5° (half-power)
0°–6°
65° (half-power)
4.8° (half-power)
0°–6°
61° (half-power)
4.6° (half-power)
0°–6°
0.5° 5° 9.5° T
15 18 19 dB
0°
18
0° 3° 6° T
18 18 16 dB
0°
18
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
0.5 dB
2.5°
25 dB (typical)
10 dB
25 dB (typical)
10 dB
1.5 dB
2.5°
3° 6° T
17 15 dB
1850–1990 MHz
0° 3° 6° T
18.5 18.7 18.3
30 dB (co-polar)
250 watts (per input)
500 watts (total power)
11350-B
936.3782/d
1920–2180 MHz
0°
3° 6° T
18.5 18.7 18.3
30 dB (co-polar)
3° 6° T
18 16 dB
37
742 265V02
65° Dual Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
76.1 inches
(1933 mm)
77.4 inches
(1967 mm)
78.9 inches
(2005 mm)
5.7 inches
(146 mm)
10.3 inches
(261 mm)
790–960
–45o
790–960
+45o
1710–2180
–45o
1710–2180
+45o
7-16
7-16
7-16
7-16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
38
742 224V02
Integrated Combiner
Mounting Clamps Included
65° Dual Band Panel Antenna
Antenna 1
Antenna 2
HPBW
790–960
X
65°
1710–2180
X
65°
Adj. Electrical Downtilt
0.5°–9.5°
0°–6°
Dual Band (MHz)
Dual Polarization
Manual, or optional remote control
790–960 MHz
0o
0o
270o
270o
90o
12
0o
90o
0o
24
0o
21
Horizontal pattern
45°- polarization
180o
0o
15
0o
12
0o
0o
24
21
o
30
Vertical pattern
45°- polarization
0.5°–9.5° electrical downtilt
1710–2180 MHz
10
30
0o
30
0o
0o
12
0o
0o
24
180o
0o
15
0o
15
Horizontal pattern
45°- polarization
90o
0o
0o
270o
21
12
0o
24
21
o
60
20
30
90o
180o
3
10
o
60
20
270o
The insertion loss is included in the
given antenna gain values.
0o
30
o
o
30
0o
3
33
0o
30
Integrated combiner
60
20
30
180o
3
o
30
o
33
30
o
60
20
0o
Shipping weight
0o
33
Mounting category
Wind survival rating
Shipping dimensions
30
0o
10
10
0o
Wind load
Front/Side/Rear
3
15
Dimensions
0o
0o
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
Weight
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female (long neck)
30 dB
44.1 lb (20 kg)
48.1 lb (21.8 kg) clamps included
76.1 x 10.3 x 5.7 inches
(1933 x 261 x 146 mm)
at 93 mph (150kph)
192 lbf / 86 lbf / 205 lbf
(850 N) / (380 N) / (910 N)
M (Medium)
120 mph (200 kph)
88.8 x 11.1 x 7.2 inches
(2256 x 282 x 182 mm)
56.9 lb (25.8 kg)
33
Frequency range
30
General specifications
Vertical pattern
45°- polarization
0°–6° electrical downtilt
Profile PA5
Specifications
Gain
790–862 MHz
0.5° 5°
9.5° T
15.6 15.5 15.3 dBi
27 dB (co-polar)
68° (half-power)
880–960 MHz
0.5° 5° 9.5° T
16.1 16 15.6 dBi
28 dB (co-polar)
65° (half-power)
1710–1880 MHz
0°
3°
6° T
18.2 18.5 18.3 dBi
30 dB (co-polar)
65° (half-power)
1850–1990 MHz
0°
3°
6° T
18.5 18.7 18.3 dBi
30 dB (co-polar)
65° (half-power)
Front-to-back ratio
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
10.9° (half-power)
10° (half-power)
5° (half-power)
4.8° (half-power)
vertical beamwidth
Electrical downtilt
0.5°–9.5°
0.5°–9.5°
0°–6°
0°–6°
continuously adjustable
(manual or optional remote control)
Sidelobe suppression for first 0.5° 5° 9.5° T
0.5° 5° 9.5° T
0°
3° 6° T
0°
3° 6° T
sidelobe above main beam avg 15 16 17 dB
15 18 19 dB
18 17 15 dB
18 18 16 dB
Cross polar ratio
Main direction
0°
25 dB (typical)
25 dB (typical)
25 dB (typical)
25 dB (typical)
Sector
60°
10 dB
10 dB
10 dB
10 dB
Maximum input power (at 50°C)
per input
250 watts (790–960 MHz)
200 watts (1710–2180 MHz)
combined input
450 watts (790–960 MHz and 1710–2180 MHz)
Tracking, average
1.5 dB
0.5 dB
Squint
2.5°
2.5°
1900–2180 MHz
0°
3°
6° T
18.5 18.7 18.3 dBi
30 dB (co-polar)
61° (half-power)
4.6° (half-power)
0°–6°
0°
18
3° 6° T
18 16 dB
25 dB (typical)
10 dB
11361-A
936.3860/d
39
742 224V02
65° Dual Band Panel Antenna
Integrated Combiner
2.625 inches 0.125
(68 mm 4)
76.1 inches
(1933 mm)
77.4 inches
(1967 mm)
78.9 inches
(2005 mm)
5.7 inches
(146 mm)
10.3 inches
(261 mm)
1710–2180
–45o
790–960
–45o
1710–2180
+45o
790–960
+45o
C
C
7-16
7-16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
40
742 266V02
65° Dual Band Panel Antenna
Mounting Clamps Included
Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
790–960
X
65°
1710–2180
X
65°
0°–7°
0°–6°
790–960 MHz
o
33
0o
30
0o
3
0o
10
30
o
60
20
0o
30
30
270o
90o
270o
12
0o
90o
0o
Horizontal pattern
45°- polarization
180o
0o
21
0o
0o
24
15
180o
12
0o
0o
24
21
o
60
20
0o
Vertical pattern
45°- polarization
0°–7° electrical downtilt
1710–2180 MHz
0o
o
3
0o
30
3
10
10
30
0o
30
o
60
20
0o
o
60
20
30
30
270o
90o
270o
12
0o
90o
0o
21
0o
Horizontal pattern
45°- polarization
180o
0o
15
0o
0o
24
15
180o
12
0o
0o
24
21
30
o
0o
33
Shipping weight
30
0o
Mounting category
Wind survival rating
Shipping dimensions
3
10
33
Wind load
Front/Side/Rear
0o
15
Dimensions
0o
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
intersystem
Weight
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
30 dB
45 dB
Typ. 50 dB (790–960 // 1710–2180 MHz)
52.9 lb (24 kg)
57.3 lb (26 kg) clamps included
99.7 x 10.3 x 5.7 inches
(2533 x 261 x 146 mm)
at 93 mph (150kph)
261 lbf / 113 lbf / 273 lbf
(1160 N) / (500 N) / (1210 N)
H (Heavy)
120 mph (200 kph)
112.4 x 11.1 x 7.2 inches
(2856 x 282 x 182 mm)
70.5 lb (32 kg)
33
Frequency range
30
o
General specifications
Vertical pattern
45°- polarization
0°–6° electrical downtilt
Profile PA5
Specifications
Gain (average)
(dbi)
Front-to-back ratio
Maximum input power
(at 50°C)
+45° and -45° polarization
horizontal beamwidth
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
(average)
Cross polar ratio
Main direction
0°
Sector
60°
Tracking (average)
Squint
790–862 MHz
0° 3° 7° T
16.6 16.6 16.5
30 dB (co-polar)
824–894 MHz
0° 3° 7° T
17.0 16.9 16.7
30 dB (co-polar)
500 watts (per input)
1000 watts (total power)
880–960 MHz
0° 3° 7° T
17.0 17.1 16.9
30 dB (co-polar)
1710–1880 MHz
0°
3° 6° T
18.2 18.5 18.3
30 dB (co-polar)
68° (half-power)
67° (half-power)
8° (half-power)
7.7° (half-power)
0°–7°
0°–7°
(manual or optional remote control)
0° 3° 7° T
0° 3° 7° T
17 17 15 dB
17 17 15 dB
65° (half-power)
7.2° (half-power)
0°–7°
65° (half-power)
5° (half-power)
0°–6°
65° (half-power)
4.8° (half-power)
0°–6°
61° (half-power)
4.6° (half-power)
0°–6°
0° 3° 7° T
18 17 15 dB
0°
18
0° 3° 6° T
18 18 16 dB
0°
18
30 dB (typical)
10 dB
30 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
0.5 dB
2.5°
25 dB (typical)
10 dB
30 dB (typical)
10 dB
1 dB
2.5°
3° 6° T
17 15 dB
1850–1990 MHz
0° 3° 6° T
18.5 18.7 18.3
30 dB (co-polar)
250 watts (per input)
500 watts (total power)
1920–2180 MHz
0°
3° 6° T
18.5 18.7 18.3
30 dB (co-polar)
3° 6° T
18 16 dB
11351-C
936.3785/d
41
742 266V02
65° Dual Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
99.7 inches
(2533 mm)
101.1 inches
(2567 mm)
102.6 inches
(2605 mm)
5.7 inches
(146 mm)
10.3 inches
(261 mm)
1710–2180
–45o
790–960
–45o
790–960
+45o
1710–2180
+45o
7-16
7-16
7-16
7-16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 Degrees downtilt angle.
Reference the Mechanical Accessories section.
42
742 225V02
Integrated Combiner
Mounting Clamps Included
65° Dual Band Panel Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
790–960
X
65°
1710–2180
X
65°
0°–7°
0°–6°
Adj. Electrical Downtilt
Manual, or optional remote control
790–960 MHz
0o
0o
6
20
0o
12
0o
0o
24
270o
90o
12
0o
0o
24
0o
Horizontal pattern
45°- polarization
180o
0o
21
0o
o
15
21
60
20
30
90o
Vertical pattern
45°- polarization
0°–7° electrical downtilt
1710–2180 MHz
10
30
0o
30
0o
0o
180o
0o
Horizontal pattern
45°- polarization
12
0o
24
15
0o
15
0o
o
90o
0o
0o
270o
21
12
0o
24
21
60
20
30
90o
180o
3
10
o
60
20
30
The insertion loss is included in the
given antenna gain values.
0o
30
o
30
o
0o
3
33
0o
270o
Integrated combiner
30
30
270o
180o
3
o
30
o
33
0o
0o
Shipping weight
30
0o
10
10
33
Mounting category
Wind survival rating
Shipping dimensions
3
0o
Wind load
Front/Side/Rear
0o
15
Dimensions
0o
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
Weight
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female (long neck)
30 dB
52.9 lb (24 kg)
57.3 lb (26.kg) clamps included
99.7 x 10.3 x 5.7 inches
(2533 x 261 x 146 mm)
at 93 mph (150kph)
261 lbf / 113 lbf / 273 lbf
(1160 N) / (500 N) / (1210 N)
H (Heavy)
120 mph (200 kph)
112.4 x 11.1 x 7.2 inches
(2856 x 282 x 182 mm)
67.9 lb (30.8 kg)
33
Frequency range
30
General specifications
Vertical pattern
45°- polarization
0°–6° electrical downtilt
Profile PA5
Specifications
Gain
790–862 MHz
0°
3°
7° T
16.6 16.6 16.5 dBi
30 dB (co-polar)
68° (half-power)
880–960 MHz
0°
3° 7° T
17 17.1 16.9 dBi
30 dB (co-polar)
65° (half-power)
1710–1880 MHz
0°
3°
6° T
18.2 18.5 18.3 dBi
30 dB (co-polar)
65° (half-power)
1850–1990 MHz
1900–2180 MHz
0°
3°
6° TProfile 0°
PA23° 6° T
18.5 18.7 18.3 dBi
18.5 18.7 18.3 dBi
30 dB (co-polar)
30 dB (co-polar)
65° (half-power)
61° (half-power)
Front-to-back ratio
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
7.7° (half-power)
7.2° (half-power)
5° (half-power)
4.8° (half-power)
vertical beamwidth
Electrical downtilt
0°–7°
0°–7°
0°–6°
0°–6°
continuously adjustable
(manual or optional remote control)
Sidelobe suppression for first
0° 4° 7° T
0° 4° 7° T
0° 3° 6° T
0° 3° 6° T
sidelobe above main beam avg 17 17 15 dB
18 17 15 dB
18 17 15 dB
18 18 16 dB
Cross polar ratio
Main direction
0°
30 dB (typical)
30 dB (typical)
25 dB (typical)
25 dB (typical)
Sector
60°
10 dB
10 dB
10 dB
10 dB
Maximum input power (at 50°C)
per input
250 watts (790–960 MHz)
200 watts (1710–2180 MHz)
combined input
450 watts (790–960 MHz and 1710–2180 MHz)
Tracking, average
1.0 dB
0.5 dB
Squint
2.5°
2.5°
4.6° (half-power)
0°–6°
0° 3° 6° T
18 18 16 dB
25 dB (typical)
10 dB
11362-C
936.3861/e
43
742 225V02
65° Dual Band Panel Antenna
Integrated Combiner
2.625 inches 0.125
(68 mm 4)
99.7 inches
(2533 mm)
101.1 inches
(2567 mm)
102.6 inches
(2605 mm)
5.7 inches
(146 mm)
10.3 inches
(261 mm)
1710–2180
–45o
790–960
–45o
1710–2180
+45o
790–960
+45o
C
C
7-16
7-16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
44
800 10665V01
65° Dual Band Panel Antenna
Mounting Clamps Included
Antenna 1
Antenna 2
790–960
X
65°
1710–2690
X
65°
0°–10°
2°–8°
Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
790–960 MHz
o
30
270o
90o
12
0o
0o
24
0o
21
180o
0o
Horizontal pattern
45°- polarization
3
30
o
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
9.5° (half-power)
0o
21
180o
0o
65° (half-power)
15
Vertical pattern
45°- polarization
0°–10° electrical downtilt
0°–10°
Profile PA4
5° 10° T
18 16
17 dB
18 16
14 dB
1710–2690 MHz
0o
33
0o
3
o
0°
30
Average gain (dBi)
Tilt
Front-to-back ratio
(180° 30°)
Maximum input power
500 watts (per input)
(at 50°C)
1000 watts (total power)
+45° and -45° polarization 68° (half-power)
67° (half-power)
horizontal beamwidth
+45° and -45° polarization 10° (half-power)
9.8° (half-power)
vertical beamwidth
Electrical downtilt
0°–10°
0°–10°
continuously adjustable
(manual or optional remote control)
Sidelobe suppression
0° 5° 10° T
0° 5° 10° T
for first sidelobe above
main beam
19 15 17 dB
19 17 18 dB
within 0°–20° sector
above horizon
18 15 16 dB
18 16 15 dB
Cross polar ratio (typical)
880–960 MHz
16.1 16.2 15.8
0° 5° 10°
27 dB (co-polar)
o
60
20
15
824–894 MHz
16.1 16.2 15.8
0° 5° 10°
27 dB (co-polar)
10
0o
0o
790–862 MHz
16.1 16.1 15.6
0° 5° 10°
27 dB (co-polar)
3
30
33
Specifications
0o
0o
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
790–960 MHz
1710–2690 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female
intrasystem 30 dB (790–960 MHz)
intrasystem 28 dB (1710–2690 MHz)
intersystem 30 dB (790–960 // 1710–2690 MHz)
33
Frequency range
30
General specifications
10
2400–2690 MHz
2°
5°
8°
18.2 18.7 18.4
26 dB (co-polar)
90o
12
0o
63° (half-power)
4.4° (half-power)
3.9° (half-power)
3.5° (half-power)
2°–8°
2° 5°
2°–8°
2° 5°
2°–8°
2° 5°
2°–8°
2°
5°
2°–8°
2°
5°
180o
Horizontal pattern
45°- polarization
0o
3
o
30
o
4.8° (half-power)
8° T
270o
0o
5° (half-power)
8° T
30
0o
63° (half-power)
8° T
o
60
20
24
63° (half-power)
8° T
0o
0o
15
1920–2170 MHz
2300–2400 MHz
2° 5° 8°
2°
5° 8°
18.7 18.7 18.2
18.9 18.7 18
25 dB (co-polar)
26 dB (co-polar)
200 watts (per input)
400 watts (total power)
62° (half-power)
61° (half-power)
0
33
10
8° T
17 18 19 dB
18 18 19 dB
18 18 19 dB
18 18 18 dB
17 18
19 dB
16 16 17 dB
17 16 18 dB
17 17 16 dB
18 18 15 dB
16 18
14 dB
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
18 dB
10 dB
22 dB
10 dB
23 dB
10 dB
20 dB
10 dB
25 dB
10 dB
180o
0o
15
Front-to-back ratio
Maximum input power
(at 50°C)
45° polarization
horizontal beamwidth
45° polarization
vertical beamwidth
Electrical downtilt
Sidelobe suppression
for first sidelobe above
main beam
within 0°–20° sector
above horizon
Cross polar ratio (typical)
Main direction
0°
Sector
60°
1850–1990 MHz
2° 5° 8°
18.4 18.4 18.1
26 dB (co-polar)
21
Average gain (dBi)
1710–1880 MHz
tilt 2° 5° 8°
18.2 18.3 18
25 dB (co-polar)
21
0o
Specifications
30
Vertical pattern
45°- polarization
2°–8° electrical downtilt
11433-A
936.4429
45
800 10665V01
65° Dual Band Panel Antenna
Mechanical specifications
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
52.9 lb (24 kg)
57.3 lb (26 kg) clamps included
78.6 x 11.8 x 6 inches
(1997 x 300 x 152 mm)
at 93 mph (150kph)
223 lbf / 86 lbf / 232 lbf
(990 N) / (380 N) / (1030 N)
M (Medium)
120 mph (200 kph)
91.2 x 12.7 x 7.5 inches
(2316 x 322 x 190 mm)
63.9 lb (29 kg)
2.625 inches 0.125
(68 mm 4)
81.4 inches
(2067 mm)
79.8 inches
(2027 mm)
78.6 inches
(1997 mm)
6 inches
(152 mm)
11.8 inches
(300 mm)
790–960
–45°
790–960
+45°
1710–2690
–45°
1710–2690
+45°
7 16
7 16
7 16
7 16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
46
800 10666
65° Dual Band Panel Antenna
Mounting Clamps Included
Antenna 1
Antenna 2
HPBW
790–960
X
65°
1710–2690
X
65°
Adj. Electrical Downtilt
0.5°–9.5°
0°–6°
Manual, or optional remote control
General specifications
°
60
20
30
270°
90°
12
0°
0°
24
0°
21
180°
0°
Horizontal pattern
45°- polarization
0°
3
10
30
0°
°
60
20
30
270°
90°
12
0°
0°
24
0°
180°
0°
15
Shipping weight
3
15
Mounting category
Wind survival rating
Shipping dimensions
0°
0°
Wind load
Front/Side/Rear
0°
10
30
33
Dimensions
0°
Weight
790–960 MHz
33
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
790–960 MHz
1710–2690 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
intrasystem 30 dB (790–960 MHz)
intrasystem 28 dB (1710–2690 MHz)
intersystem 30 dB (790–960 // 1710–2690 MHz)
63.9 lb (29 kg)
68.3 lb (31 kg) clamps included
103.2 x 11.8 x 6 inches
(2622 x 300 x 152 mm)
at 93 mph (150kph)
286 lbf / 111 lbf / 297 lbf
(1270 N) / (490 N) / (1320 N)
H (Heavy)
120 mph (200 kph)
116.2 x 12.7 x 7.5 inches
(2951 x 322 x 190 mm)
72.8 lb (33 kg)
21
Frequency range
30
°
Dual Polarization
30
°
Dual Band (MHz)
Vertical pattern
45°- polarization
0.5°–9.5° electrical downtilt
Specifications
790–866 MHz
824–896 MHz
880–960 MHz
Average gain (dBi)
16.8 16.7 16.5
17 17 16.8
17.1 17.2 17
Tilt
0.5° 5° 9.5°
0.5° 5° 9.5°
0.5° 5° 9.5°
Front-to-back ratio
25 dB (co-polar)
25 dB (co-polar)
25 dB (co-polar)
(180° 30°)
Maximum input power
500 watts (per input)
(at 50°C)
1000 watts (total power)
+45° and -45° polarization 68° (half-power)
67° (half-power)
65° (half-power)
horizontal beamwidth
+45° and -45° polarization 7.5° (half-power)
7.4° (half-power)
7.1° (half-power)
vertical beamwidth
Electrical downtilt
0.5°–9.5°
0.5°–9.5°
0.5°–9.5°
continuously adjustable
(manual or optional remote control)
Min. suppression for first
0.5° 5° 9.5° T
0.5° 5° 9.5° T
0.5° 5° 9.5° T
sidelobe above main beam 18 16 14 dB
18 17 15 dB
18 18 18 dB
Cross polar ratio (typical)
Main direction
0°
24 dB
23 dB
22 dB
Sector
60°
10 dB
10 dB
10 dB
Profile PA4
11372-D
936.4069/c
47
800 10666
65° Dual Band Panel Antenna
Specifications
Gain
Front-to-back ratio
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Min. sidelobe suppression for
first sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
Maximum input power (at 50°C)
1710–1880 MHz
0°
3°
6° T
18.5 18.4 18.1 dBi
25 dB (co-polar)
62° (half-power)
1850–1990 MHz
0°
3° 6° T
18.5 18.4 18.1 dBi
25 dB (co-polar)
63° (half-power)
1920–2170 MHz
0°
3°
6° T
18.8 18.7 18.2 dBi
25 dB (co-polar)
62° (half-power)
2300–2400 MHz
0°
3°
6° T
18.7 18.5 17.8 dBi
25 dB (co-polar)
63° (half-power)
2490–2690 MHz
0°
3°
6° T
18.2 18.3 18 dBi
25 dB (co-polar)
63° (half-power)
4.5° (half-power)
4.4° (half-power)
4.1° (half-power)
3.8° (half-power)
3.5° (half-power)
0°–6°
0°–6°
0°–6°
0°–6°
0°–6°
0° 3° 6° T
17 16 16 dB
0° 3° 6° T
18 18 17 dB
0° 3° 6° T
18 17 17 dB
0° 3° 6° T
18 18 17 dB
0° 3° 6° T
18 18 17 dB
18 dB (typical)
10 dB
22 dB (typical)
10 dB
23 dB (typical)
10 dB
200 watts (per input)
400 watts (total power)
22 dB (typical)
10 dB
25 dB (typical)
10 dB
1710–2690 MHz
0°
30
°
60
20
0°
30
270°
90°
0°
90°
0°
0°
21
0°
Horizontal pattern
45°- polarization
180°
0°
15
0°
12
24
15
21
270°
0°
12
0°
24
180°
°
60
20
30
2.625 inches 0.125
(68 mm 4)
3
10
10
30
0°
30
°
°
30
0°
3
33
0°
33
0°
Vertical pattern
45°- polarization
0°–6° electrical downtilt
106 inches
(2692 mm)
104.4 inches
(2652 mm)
103.2 inches
(2622 mm)
790–960
–45°
790–960
+45°
1710–2690
–45°
1710–2690
+45°
7-16
7-16
7-16
7-16
6 inches
(152 mm)
11.8 inches
(300 mm)
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
48
NEW
800 10692V01
Expanded Frequency Range
Mounting Clamps Included
65° Hex Port Panel Antenna
Antenna 1
Antenna 2
Antenna 3
HPBW
698–960
X
65°
1710–2690
X
65°
1710–2690
X
65°
Adj. Electrical Downtilt
1.5°–10°
0°–10°
2°–10°
Triple Band (MHz)
Dual Polarization
Manual, or optional remote control
General specifications
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
intrasystem
Isolation
intersystem
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
698–960 MHz // 1710–2690 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
6 x 7-16 DIN female (long neck)
30 dB (698–960 MHz)
28 dB (1710–2690 MHz)
32 dB (698–960 // 1710–2690 MHz)
32 dB (1710–2690 // 1710–2690 MHz)
68.3 lb (31 kg)
72.8 lb (33 kg) clamps included
103.2 x 11.8 x 6 inches
(2622 x 300 x 152 mm)
at 93 mph (150kph)
311 lbf / 117 lbf / 335 lbf
(1380 N) / (520 N) / (1490 N)
H (Heavy)
120 mph (200 kph)
116.2 x 12.7 x 7.5 inches
(2951 x 322 x 190 mm)
77.2 lb (35 kg)
Profile PA4
7.6° (half-power)
7.1° (half-power)
1.5°–10°
1.5°–10°
1.5°–10°
1.5° 6° 10° T
18 16 16 dB
1.5° 6° 10° T
18 17 17 dB
1.5° 6° 10° T
18 16 16 dB
0°
3
°
7.8° (half-power)
698–960 MHz
30
880–960 MHz
1.5° 6° 10°
17 17.2 17.1
27 dB (co-polar)
0°
790–862 MHz
824–894 MHz
1.5° 6° 10°
1.5° 6° 10°
16.5 16.7 16.7
16.8 16.9 16.8
27 dB (co-polar)
27 dB (co-polar)
500 watts (per input)
1000 watts (total power)
66° (half-power)
66° (half-power)
10
30
0°
°
60
20
30
270°
90°
65° (half-power)
12
0°
0°
Horizontal pattern
45°- polarization
22 dB
8 dB
°
3
30
0°
33
0°
22 dB
10 dB
0°
10
30
23 dB
10 dB
180°
0°
15
0°
24
21
tilt
33
698–820 MHz
1.5° 6° 10°
16.1 16.2 16.2
Front-to-back ratio (180 30°) 25 dB (co-polar)
Maximum input power
(at 50°C)
+45° and -45° polarization 69° (half-power)
horizontal beamwidth
+45° and -45° polarization 8.5° (half-power)
vertical beamwidth
Electrical downtilt
1.5°–10°
continuously adjustable
(manual or optional remote control)
Min. suppression for first
1.5° 6° 10° T
sidelobe above main beam 17 16 15 dB
Cross polar ratio (typical)
Main direction
0°
25 dB
Sector
60°
9 dB
Average gain (dBi)
60
20
°
30
270°
90°
12
0°
0°
24
180°
0°
15
21
0°
Specifications
Vertical pattern
45°- polarization
0.5°–10° electrical downtilt
11426-C
936.4422/c
49
800 10692V01
65° Hex Port Panel Antenna
2° 6° 10°
16.3 16.5 16.2
27 dB (co-polar)
2° 6° 10°
2°
6° 10°
16.3 16.5 16
16.5 16.3 15.5
27 dB (co-polar)
26 dB (co-polar)
200 watts (per input)
400 watts (total power)
63° (half-power)
61° (half-power)
62° (half-power)
60° (half-power)
61° (half-power)
63° (half-power)
66° (half-power)
67° (half-power)
7.6° (half-power)
7.4° (half-power)
7.2° (half-power)
6.1° (half-power)
6.5° (half-power)
6.2° (half-power)
6° (half-power)
5.5° (half-power)
(continuously adjustable)
0°–10°
0°–10°
0°–10°
0°–10°
2°–10°
2°–10°
2°–10°
2°–10°
0° 5° 10° T
0° 5° 10° T
0° 5° 10° T
0° 5° 10° T
17 15 14 dB
18 17 16 dB
18 18 16 dB
18 18 14 dB
2°
6° 10°
16.2 17 16.3
26 dB (co-polar)
2° 6° 10° T
15 17 18 dB
2° 6° 10° T
16 18 17 dB
2° 6° 10° T
16 18 18 dB
18 dB
8 dB
23 dB
10 dB
2° 6° 10° T
15 18 18 dB
2° 6° 10° T
18 18 17 dB
22 dB
10 dB
2.625 inches 0.125
(68 mm 4)
20 dB
8 dB
63° (half-power)
63° (half-power)
5.9° (half-power)
4.9° (half-power)
0°–10°
2°–10°
0° 5° 10° T
18 18 15 dB
20 dB
8 dB
1710–2690 MHz
bottom system
1710–2690 MHz
top system
0°
3
33
0°
33
0°
°
Cross polar ratio (typical)
Main direction
0°
Sector
60°
2490–2690 MHz
0°
5° 10°
16.7 17 16.5
30
2° 6° 10°
16.5 16.5 16.1
27 dB (co-polar)
2300–2400 MHz
0°
5° 10°
17.2 16.7 15.7
0°
°
60
20
30
0°
30
270°
90°
12
0°
0°
24
90°
0°
0°
0°
°
30
0°
0°
3
33
Horizontal pattern
45°- polarization
33
Horizontal pattern
45°- polarization
10
30
0°
°
0°
0°
°
12
0°
0°
24
180°
0°
15
0°
15
Vertical pattern
45°- polarization
0°–10° electrical downtilt
90°
°
12
0°
24
270°
21
0
90°
21
0
°
60
20
30
270°
180°
3
10
60
20
30
30
6 inches
(152 mm)
180°
0°
21
0°
0°
15
180°
12
0°
24
0°
21
270°
15
103.2 inches
(2622 mm)
°
60
20
30
106 inches
(2692 mm)
104.4 inches
(2652 mm)
3
10
10
30
0°
°
tilt
top system
Front-to-back ratio
Maximum input power
(at 50°C)
45° polarization
bottom
horizontal beamwidth top
45° polarization
bottom
vertical beamwidth
top
Electrical downtilt
bottom
top
Min. suppression
bottom
for first sidelobe
above main beam
top
1920–2170 MHz
0° 5° 10°
16.7 16.9 16.1
30
1850–1990 MHz
0° 5° 10°
16.7 16.8 16.5
°
1710–1880 MHz
Average gain (dBi)
tilt 0° 5° 10°
bottom system 16.6 16.6 16.1
30
Specifications
Vertical pattern
45°- polarization
2°–10° electrical downtilt
11.8 inches
(300 mm)
1710–2690
–45°
69 –960
–45°
69 –960
+45°
1710–2690
+45°
1710–2690 1710–2690
+45°
–45°
Mounting E uipment
Model
2 x 738 546
7 16
50
7 16
7 16 7 16
7 16
7 16
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10290V02
65° Triple Band Panel Antenna
Mounting Clamps Included
Triple Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
Antenna 3
806–960
X
65°
1710–2180
X
65°
1710–2180
X
65°
0°–14°
0°–14°
0°–14°
General specifications
10
60
20
30
°
0°
°
60
20
30
30
270°
90°
12
0°
270°
90°
0°
Horizontal pattern
45°-polarization
180°
0°
21
0°
0°
24
15
180°
12
0°
0°
24
21
30
30
°
0°
3
°
0°
33
0°
0°
Vertical pattern
45°-polarization
0°–14° electrical downtilt
1710–2180 MHz
0°
°
60
20
30
0°
30
90°
12
0°
0°
24
270°
90°
180°
0°
0°
21
0°
0°
15
15
Horizontal pattern
45°-polarization
12
0°
24
0°
270°
21
°
60
20
30
180°
3
10
10
30
0°
°
°
30
0°
3
30
0°
33
Shipping weight
30
0°
Mounting category
Wind survival rating
Shipping dimensions
3
10
33
Wind load
Front/Side/Rear
0°
15
Dimensions
0°
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
intersystem
Weight
790–960 MHz
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
6 x 7-16 DIN female
30 dB
35 dB (790–960 // 1710–2180 MHz)
30 dB (1710–2180 // 1710–2180 MHz)
46.3 lb (21 kg)
50.7 lb (23 kg) clamps included
60.6 x 10.3 x 5.9 inches
(1540 x 262 x 149 mm)
at 93 mph (150kph)
108 lbf / 68 lbf / 158 lbf
(480 N / 300 N / 700 N)
M (Medium)
120 mph (200 kph)
73.5 x 11.1 x 7.2 inches
(1866 x 282 x 182 mm)
57.3 lb (26 kg)
33
Frequency range
Vertical pattern
45°-polarization
0°–14° electrical downtilt
Profile PA3
Specifications
Gain
(dbi)
tilt
Front-to-back ratio (180° 30°)
Maximum input power
per input (at 50°C)
+45° and -45° polarization
horizontal beamwidth
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
Cross polar ratio (typical)
Main direction
0°
Sector
60°
790–866 MHz
0° 7° 14°
14.4 14.3 14
824–894 MHz
0° 7° 14°
14.6 14.4 14.2
880–960 MHz
0° 7° 14°
14.9 14.7 14.4
1710–1880 MHz
0°
7°
14°°
bottom 14.5 14.5 14.2
top 14
14
13.7
25 dB
250 watts
25 dB
400 watts
25 dB
400 watts
25 dB
400 watts
69° (half-power)
14.7° (half-power)
0°–14°
68° (half-power)
14.3° (half-power)
0°–14°
0° 7° 14° T
17 16 16 dB
0° 7° 14° T
18 16 16 dB
67° (half-power)
13.9° (half-power)
0°–14°
bottom
top
0° 7° 14° T
18 17 16 dB
25 dB
10 dB
25 dB
10 dB
25 dB
10 dB
1850–1990 MHz
0° 7°
14°
14.8 14.8 14.5
14.4 14.3 13.9
25 dB
250 watts
1920–2180 MHz
0°
7°
14°
15.1 14.8 14.4
14.9 14.8 14.2
25 dB
250 watts
67° (half-power)
13.8° (half-power)
0°–14°
0°–14°
0°
7° 14° T
18
16 15 dB
63° (half-power)
13.2° (half-power)
0°–14°
0°–14°
0° 7° 14° T
18 17 17 dB
60° (half-power)
12.6° (half-power)
0°–14°
0°–14°
0°
7° 14° T
18
16 17 dB
20 dB
10 dB
20 dB
10 dB
20 dB
10 dB
11439-A
936.4457
51
800 10290V02
65° Triple Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
60.6 inches
(1540 mm)
62.3 inches
(1583 mm)
68.7 inches
(1745 mm)
63.9 inches
(1623 mm)
5.9 inches
(149 mm)
10.3 inches
(262 mm)
–45° –45°
–45° +45°
+45° +45°
1710–21 0
otto
y te
790–960
1710–21 0 to y te
Layout of interface
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–13 degrees downtilt angle.
Reference the Mechanical Accessories section.
52
800 10291V02
65° Triple Band Panel Antenna
Mounting Clamps Included
Triple Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
Antenna 3
790–960
X
65°
1710–2180
X
65°
1710–2180
X
65°
2°–14°
0°–14°
0°–14°
Adj. Electrical Downtilt
Manual, or optional remote control
790–960 MHz
10
o
60
20
12
0o
21
0o
0o
Horizontal pattern
45°-polarization
0o
180o
12
0o
24
15
21
90o
0o
0o
24
180o
Vertical pattern
45°-polarization
2°–14° electrical downtilt
1710–2180 MHz
o
30
3
10
30
0o
10
o
60
20
30
0o
o
60
20
30
30
90o 270o
0o
0o
0o
21
0o
15
0o
180o
12
0o
24
0o
12
90o
21
270o
880–960 MHz
2° 8° 14° T
16.4 16.2 15.8
30
o
0o
0o
3
33
0o
15
Front-to-back ratio
(180° 30)
Maximum input power
per input (at 50°C)
+45° and -45° polarization
horizontal beamwidth
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe
above main beam (dB)
Cross polar ratio
Main direction
0°
Sector
60°
Tracking
824–894 MHz
2° 8° 14° T
16.3 16.1 15.8
o
60
20
90o 270o
270o
Horizontal pattern
45°-polarization
790–866 MHz
2° 8° 14° T
16.2 16 15.7
0o
30
0o
Average gain (dbi)
30
30
24
Specifications
3
0o
30
o
33
0o
0o
Mounting category
Wind survival rating
Shipping dimensions
30
33
Wind load
Front/Side/Rear
0o
10
0o
Dimensions
3
15
Weight
0o
0o
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -153 dBc
+45° and -45°
6 x 7-16 DIN female (long neck)
30 dB
35 dB (790–960 // 1710–2180 MHz)
30 dB (1710–2180 // 1710–2180 MHz)
59.2 lb (27 kg)
63.9 lb (29 kg) clamps included
81 x 10.3 x 5.9 inches
(2058 x 262 x 149 mm)
at 93 mph (150kph)
144 lbf / 90 lbf / 214 lbf
(640 N / 400 N / 950 N)
M (Medium)
120 mph (200 kph)
93.9 x 11.1 x 7.2 inches
(2385 x 282 x 182 mm)
33
Frequency range
30
o
General specifications
180o
Vertical pattern
45°-polarization
0°–14° electrical downtilt
25 dB
25 dB
25 dB
1710–1880 MHz
0°
7° 14° T
syst 1 15.9 15.9 15.5
syst 2 15.8 15.8 15.4
25 dB
400 watts
400 watts
400 watts
250 watts
250 watts
250 watts
68° (half-power)
67° (half-power)
10° (half-power)
9.7° (half-power)
2°–14°
2°–14°
(manual or optional remote control)
65° (half-power)
9.3° (half-power)
2°–14°
65° (half-power)
9.5° (half-power)
0°–14°
64° (half-power)
9° (half-power)
0°–14°
60° (half-power)
8.7° (half-power)
0°–14°
2° 8° 14° T
17 17 15
2° 8° 14° T
17 17 16
2° 8° 14° T
17 17 16
0°
18
0° 7° 14° T
18 17 17
0°
18
25 dB (typical)
10 dB
25 dB (typical)
10 dB
1.0 dB
25 dB (typical)
10 dB
18 dB (typical)
10 dB
19 dB (typical)
10 dB
1.0 dB
20 dB (typical)
10 dB
7° 14° T
17 17
1850–1990 MHz
0° 7° 14° T
16.2 16.2 15.7
16.1 16.1 15.4
25 dB
1920–2180 MHz
0°
7° 14° T
16.3 16.3 15.8
16.3 16.2 15.5
25 dB
11355-B
936.3881/b
7° 14° T
17 17
53
800 10291V02
65° Triple Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
81 inches
(2058 mm)
82.7 inches
(2101 mm)
84.3 inches
(2141 mm)
5.9 inches
(149 mm)
10.3 inches
(262 mm)
RCU
RCU
RCU
–45o +45o
–45o –45o
+45o +45o
1710–2180
bottom system
790–960
1710–2180 top system
Layout of interface
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
54
800 10292V03
65° Triple Band Panel Antenna
Mounting Clamps Included
Triple Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
Antenna 3
790–960
X
65°
1710–2180
X
65°
1710–2180
X
65°
2°–10°
0°–10°
0°–10°
Adj. Electrical Downtilt
Manual, or optional remote control
790–960 MHz
0o
12
0o
0o
21
0o
Horizontal pattern
45°- polarization
180o
0o
21
0o
15
180o
12
0o
24
0o
24
Vertical pattern
45°- polarization
2°–10° electrical downtilt
1710–2180 MHz
10
30
0o
0o
3
o
30
o
0o
3
30
0o
33
10
o
60
20
30
0o
60
20
30
270o
90o 270o
12
0o
12
0o
0o
24
0o
21
0o
21
90o
180o
0o
180o
o
30
15
30 dB (co-polar)
250 watts
o
90o
0o
Squint
30 dB (co-polar)
250 watts
60
20
90o 270o
270o
15
Front-to-back ratio
Maximum input power
per input (at 50°C)
+45° and -45° polarization
horizontal beamwidth
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for 1st
sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
60°
Tracking (average)
824–894 MHz
2° 6° 10° T
17.2 17.2 16.9
0o
30
Horizontal pattern
45°- polarization
790–862 MHz
2° 6° 10° T
17.0 17.0 16.8
30
30
0o
Gain (dbi)
o
10
o
60
20
24
Specifications
3
0o
30
o
33
30
0o
Mounting category
Wind survival rating
Shipping dimensions
0o
10
33
Wind load
Front/Side/Rear
3
0o
Dimensions
0o
15
Weight
0o
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
6 x 7-16 DIN female
30 dB
36 dB (790–960 // 1710–2180 MHz)
36 dB (1710–2180 // 1710–2180 MHz)
59.5 lb (27 kg)
63.9 lb (29 kg) clamps included
102.3 x 10.3 x 5.7 inches
(2598 x 261 x 146 mm)
at 93 mph (150kph)
273 lbf / 115 lbf / 286 lbf
(1210 N) / (510 N) / (1270 N)
H (Heavy)
120 mph (200 kph)
114.3 x 11.1 x 7.2 inches
(3026 x 282 x 182 mm)
33
Frequency range
30
General specifications
Vertical pattern
45°- polarization
0°–10° electrical downtilt
1710–1880 MHz
0°
5° 10° T
syst 1 17.1 17.2 16.6
syst 2 16.5 16.7 16.2
30 dB (co-polar)
30 dB (co-polar)
250 watts
200 watts
1850–1990 MHz
0° 5° 10° T
17.2 17.4 16.8
16.6 16.8 16.3
30 dB (co-polar)
200 watts
1920–2180 MHz
0°
5° 10° T
17.2 17.3 16.7
16.8 17.0 16.3
30 dB (co-polar)
200 watts
69° (half-power)
68° (half-power)
7.8° (half-power)
7.6° (half-power)
2°–10°
2°–10°
(manual or optional remote control)
2° 6° 10° T
2° 6° 10° T
17 16 14 dB
18 16 15 dB
66° (half-power)
7.1° (half-power)
2°–10°
65° (half-power)
7.6° (half-power)
0°–10°
62° (half-power)
7.5° (half-power)
0°–10°
61° (half-power)
6.8° (half-power)
0°–10°
2° 6° 10° T
18 16 15 dB
0°
15
0° 5° 10° T
16 16 15 dB
0°
16
25 dB (typical)
10 dB
20 dB average
25 dB (typical)
10 dB
17 dB average
25 dB (typical)
10 dB
16 dB average
25 dB (typical)
10 dB
20 dB average
1.0 dB
3.5°
880–960 MHz
2° 6° 10° T
17.4 17.4 17.0
5° 10° T
16 15 dB
25 dB (typical)
10 dB
16 dB average
syst 1 1.0 dB
syst 2 0.5 dB
3.5°
5° 10° T
16 14 dB
25 dB (typical)
10 dB
16 dB average
11418-B
936.4203/a
55
800 10292V03
65° Triple Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
102.3 inches
(2598 mm)
103.7 inches
(2633 mm)
105.2 inches
(2671 mm)
5.7 inches
(146 mm)
10.3 inches
(261 mm)
1710 –21 0
–45°
790– 960
–45°
790– 960
+45°
7 16
7 16
1710 –21 0
+45°
1710 –21 0 1710 –21 0
+45°
–45°
7 16 7 16
7 16
7 16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
56
800 10675
65° Triple Band Panel Antenna
Mounting Clamps Included
Triple Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
Antenna 3
790–960
X
65°
1710–2170
X
65°
2490–2690
X
65°
0°–10°
0°–6°
0°–6°
Adj. Electrical Downtilt
Manual, or optional remote control
General specifications
790–960 MHz
1710–2170 MHz
2490–2690 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
6 x 7-16 DIN female (long neck)
57.3 lb (26 kg)
61.7 lb (28 kg) clamps included
78.6 x 11.8 x 6 inches
(1997 x 300 x 152 mm)
at 93 mph (150kph)
230 lbf / 88 lbf / 237 lbf
(1020 N) / (390 N) / (1050 N)
M (Medium)
120 mph (200 kph)
91.2 x 12.7 x 7.5 inches
(2316 x 322 x 190 mm)
68.3 lb (31 kg)
0o
1710–1880 MHz
0° 3° 6°
18 18 17.6
25 dB (co-polar)
500 watts
200 watts
o
30
o
0o
0o
Horizontal pattern
45°- polarization
880–960 MHz
0° 5° 10°
16 16.2 15.6
27 dB (co-polar)
12
0o
24
21
0o
30
o
30
o
500 watts
1000 watts
90o
180o
0o
824–894 MHz
0° 5° 10°
16.1 16.1 15.6
27 dB (co-polar)
o
60
20
270o
0o
21
0o
180o
3
15
0o
0o
15
500 watts
12
0o
Vertical pattern
45°- polarization
0°–6° electrical downtilt
790–862 MHz
0°
5° 10°
16 16 15.5
27 dB (co-polar)
90o
24
0o
21
0o
180o
30
30
270o
12
0o
0o
10
6
20
15
tilt
(dbi)
Front-to-back ratio (180° 30°)
Maximum input power
per input (at 50°C)
total (at 50°C)
+45° and -45° polarization
horizontal beamwidth
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
dB
Cross polar ratio (typical)
Main direction 0° (dB)
Sector
60° (dB)
Isolation intrasystem
intersystem
0o
0o
30
24
0o
Gain
30
o
60
90o
15
Horizontal pattern
45°- polarization
Specifications
3
10
270o
0o
0o
180o
3
21
12
0o
24
180o
2490–2690 MHz
30
30
o
90o
0o
Vertical pattern
45°- polarization
0°–10° electrical downtilt
0o
30
270o
12
0o
24
21
0o
180o
Horizontal pattern
45°- polarization
0o
20
30
o
0o
0o
0o
30
12
0o
24
90o
15
30
o
60
270o
0o
o
60
20
3
20
33
0o
0o
90o
0o
0o
30
0o
30
270o
10
10
6
30
30
33
33
0o
33
3
0o
20
1710–2170 MHz
0o
33
Shipping weight
0o
0o
Mounting category
Wind survival rating
Shipping dimensions
30
0o
10
10
15
Wind load
Front/Side/Rear
3
0o
Dimensions
790–960 MHz
0o
33
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Weight
21
Frequency range
Vertical pattern
45°- polarization
0°–6° electrical downtilt
1850–1990 MHz
0° 3° 6°
18 18 17.5
25 dB (co-polar)
200 watts
400 watts
Profile PA4
1920–2170 MHz
0° 3° 6°
18.1 18.1 17.4
25 dB (co-polar)
200 watts
2490–2690 MHz
0° 3° 6°
17.8 17.8 17.6
25 dB (co-polar)
200 watts
400 watts
68° (half-power) 67° (half-power) 65° (half-power)
10.3° (half-power) 10.1° (half-power) 9.8° (half-power)
0°–10°
0°–10°
0°–10°
62° (half-power)
4.8° (half-power)
0°–6°
63° (half-power)
4.6° (half-power)
0°–6°
62° (half-power)
4.4° (half-power)
0°–6°
63° (half-power)
3.5° (half-power)
0°–6°
0°
18
0° 3° 6°
18 18 18
22
10 dB
5° 10°
17 15
0° 5° 10°
18 18 16
0° 5° 10°
18 18 16
0° 3° 6°
18 16 16
0° 3° 6°
18 18 17
0° 3° 6°
18 17 17
22
10 dB
30 dB
22
10 dB
18
10
22
10
23
10
25
10
28 dB
35 dB (790–960 // 1710–2170 // 2490–2690 MHz)
28 dB
11370-A
936.3879/b
57
800 10675
65° Triple Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
78.6 inches
(1997 mm)
79.8 inches
(2027 mm)
81.4 inches
(2067 mm)
6 inches
(152 mm)
11.8 inches
(300 mm)
1710–2170
–45
790–960
–45
790–960
+45
7-16
7-16
1710–2170
+45
2490–2690 2490–2690
+45
–45
7-16 7-16
7-16
7-16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
58
NEW
800 10674
65° Triple Band Panel Antenna
Mounting Clamps Included
Triple Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
Antenna 3
790–960
X
65°
1710–2170
X
65°
2490–2690
X
65°
0°–16°
2°–10°
2°–10°
General specifications
Mounting category
Wind survival rating
Shipping dimensions
Specifications
790–960 MHz
0°
3
Profile PA4
10
30
0°
°
60
20
30
270°
67° (half-power)
90°
12
0°
0°
24
180°
0°
15
15° (half-power)
Horizontal pattern
45°- polarization
0°–16°
0°
33
Average gain (dBi)
Tilt
Front-to-back ratio
(180° 30°)
Maximum input power
500 watts (per input)
(at 50°C)
1000 watts (total power)
+45° and -45° polarization 69° (half-power)
68° (half-power)
horizontal beamwidth
+45° and -45° polarization 16.5° (half-power)
16° (half-power)
vertical beamwidth
Electrical downtilt
0°–16°
0°–16°
continuously adjustable
(manual or optional remote control)
Min. suppression for first
0° 8° 16° T
0° 8° 16° T
sidelobe above main beam 16 15 15 dB
16 15 15 dB
Cross polar ratio (typical)
Main direction
0°
25 dB
25 dB
Sector
60°
10 dB
9 dB
880–960 MHz
14.8 14.6 14.4
0° 8° 16°
25 dB (co-polar)
0°
824–894 MHz
14.6 14.5 14.3
0° 8° 16°
25 dB (co-polar)
33
790–862 MHz
14.5 14.4 14.2
0° 8° 16°
25 dB (co-polar)
30
°
Wind load
Front/Side/Rear
0° 8° 16° T
15 15 15 dB
0°
3
30
°
Dimensions
0°
Weight
21
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
790–960 MHz
1710–2170 MHz
2490–2690 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
6 x 7-16 DIN female (long neck)
intrasystem 30 dB (790–960 MHz)
intrasystem 28 dB (1710–2170 MHz)
intrasystem 30 dB (2490–2690 MHz)
intersystem 30 dB (790–960 // 1710–2170 MHz // 2490–2690 MHz)
44.1 lb (20 kg)
48.5 lb (22 kg) clamps included
55.2 x 11.8 x 6 inches
(1403 x 300 x 152 mm)
at 93 mph (150kph)
158 lbf / 61 lbf / 165 lbf
(700 N) / (270 N) / (730 N)
M (Medium)
120 mph (200 kph)
68 x 12.7 x 7.5 inches
(1726 x 322 x 190 mm)
10
30
0°
°
60
20
30
23 dB
8 dB
270°
90°
12
0°
0°
24
180°
0°
15
21
0°
Frequency range
Vertical pattern
45°- polarization
0°–16° electrical downtilt
11411-A
936.4190
59
800 10674
65° Triple Band Panel Antenna
1920–2170 MHz
17.2 17.2 16.7
2° 5° 10°
25 dB (co-polar)
2490–2690 MHz
16.3 16.6 15.8
2°
5° 10°
25 dB (co-polar)
65° (half-power)
200 watts (per input)
400 watts (total power)
65° (half-power)
5.7° (half-power)
4.8° (half-power)
2°–10°
2°–10°
2°
5° 10° T
14 16 17 dB
2° 5° 10° T
14 16 17 dB
23 dB
8 dB
2490–2690 MHz
°
30
0°
3
0°
3
33
0°
33
0°
10
10
30
0°
30
0°
0°
6
20
30
12
0°
0°
0°
21
0°
180°
0°
0°
°
30
3
0°
0°
33
Horizontal pattern
45°- polarization
33
Horizontal pattern
45°- polarization
10
30
0°
10
60
20
30
°
0°
90°
270°
12
0°
0°
21
0°
21
7 16
0°
11.8 inches
(300 mm)
7 16
15
0°
6 inches
(152 mm)
180°
Vertical pattern
45°- polarization
2°–10° electrical downtilt
1710–2170
–45
790–960
+45
0°
24
Vertical pattern
45°- polarization
2°–10° electrical downtilt
790–960
–45
12
0°
0°
24
90°
15
55.2 inches
(1403 mm)
°
30
270°
180°
60
20
30
58 inches
(1473 mm)
56.4 inches
(1433 mm)
0°
15
0°
12
24
15
21
90°
0°
0°
24
3
°
270°
90°
180°
60
20
30
270°
2.625 inches 0.125
(68 mm 4)
°
1710–2170 MHz
30
23 dB
10 dB
°
1710–1880 MHz
1850–1990 MHz
Average gain (dBi)
17 17 16.6
17.2 17.2 16.8
Tilt
2° 5° 10°
2° 5° 10°
Front-to-back ratio
25 dB (co-polar)
25 dB (co-polar)
(180° 30°)
Maximum input power
200 watts (per input)
(at 50°C)
400 watts (total power)
+45° and -45° polarization 63° (half-power)
63° (half-power)
horizontal beamwidth
+45° and -45° polarization 6.2° (half-power)
5.8° (half-power)
vertical beamwidth
Electrical downtilt
2°–10°
2°–10°
continuously adjustable
(manual or optional remote control)
Min. suppression for first
2° 5° 10° T
2° 5° 10° T
sidelobe above main beam 14 15 15 dB
14 15 16 dB
Cross polar ratio (typical)
Main direction
0°
18 dB
21 dB
Sector
60°
9 dB
9 dB
30
Specifications
1710–2170
+45
2490–2690 2490–2690
+45
–45
7 16 7 16
7 16
7 16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
60
NEW
800 10691
65° Hex Port Panel Antenna
Mounting Clamps Included
Manual, or optional remote control
1710–2690
X
65°
1710–2690
X
65°
0°–10°
2°–12°
2°–12°
General specifications
30
270°
90°
12
0°
0°
24
0°
21
180°
Horizontal pattern
45°- polarization
0°
3
10
30
0°
60
20
°
30
270°
90°
12
0°
0°
24
0°
180°
0°
15
790–862 MHz
824–894 MHz
Tilt
0° 5° 10°
0° 5° 10°
Average gain (dBi)
15.9 16 15.6
16 16.2 15.8
Front-to-back ratio
27 dB (co-polar)
27 dB (co-polar)
(180° 30°)
Maximum input power
500 watts (per input)
(at 50°C)
1000 watts (total power)
+45° and -45° polarization 67° (half-power)
66° (half-power)
horizontal beamwidth
+45° and -45° polarization 10.3° (half-power)
10° (half-power)
vertical beamwidth
Electrical downtilt
0°–10°
0°–10°
continuously adjustable
(manual or optional remote control)
Min. suppression for first
0° 5° 10° T
0° 5° 10° T
sidelobe above main beam 18 16 15 dB
18 18 18 dB
20° sector
18 16 15 dB
18 18 16 dB
Cross polar ratio (typical)
Main direction
0°
24 dB
24 dB
Sector
60°
10 dB
10 dB
°
60
20
0°
Specifications
3
15
Mounting category
Wind survival rating
Shipping dimensions
0°
0°
Wind load
Front/Side/Rear
0°
10
30
33
Dimensions
0°
Weight
790–960 MHz
33
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation
790–960 MHz
1710–2690 MHz
1710–2690 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
6 x 7-16 DIN female (long neck)
intrasystem 30 dB (790–960 MHz)
intrasystem 28 dB (1710–2170 MHz)
intrasystem 26 dB ( 28 dB typ.) (2300–2400 MHz)
intrasystem 28 dB (2490–2690 MHz)
intersystem 30 dB (790–960 // 1710–2690 MHz)
intersystem 30 dB (1710–2690 // 1710–2690 MHz)
55.1 lb (25 kg)
59.5 lb (27 kg) clamps included
78.6 x 11.8 x 6 inches
(1997 x 300 x 152 mm)
at 93 mph (150kph)
230 lbf / 88 lbf / 237 lbf
(1020 N) / (390 N) / (1050 N)
M (Medium)
120 mph (200 kph)
91.2 x 12.7 x 7.5 inches
(2316 x 322 x 190 mm)
21
Frequency range
°
Adj. Electrical Downtilt
790–960
X
65°
30
HPBW
Antenna 3
°
Dual Polarization
Antenna 2
30
Triple Band (MHz)
Antenna 1
Vertical pattern
45°- polarization
0°–10° electrical downtilt
Profile PA4
880–960 MHz
0° 5° 10°
16 16.3 15.8
27 dB (co-polar)
65° (half-power)
9.6° (half-power)
0°–10°
0° 5° 10° T
18 17 17 dB
18 17 15 dB
22 dB
10 dB
11412-B
936.4213/a
61
800 10691
65° Hex Port Panel Antenna
Specifications
Tilt
Average gain (dBi) bottom
top
Front-to-back ratio
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Min. sidelobe suppression for
first sidelobe above main beam
20° sector
Cross polar ratio
Main direction
0°
Sector
60°
Maximum input power (at 50°C)
1710–1880 MHz
2°
7° 12°
15.6 15.4 15.2
15.2 15.2 14.8
25 dB (co-polar)
63° (half-power)
1850–1990 MHz
2°
7° 12°
15.5 15.7 15.4
15.4 15.4 14.9
27 dB (co-polar)
64° (half-power)
1920–2170 MHz
2°
7° 12°
15.8 15.7 15.1
15.7 15.4 14.9
27 dB (co-polar)
65° (half-power)
2300–2400 MHz
2°
7° 12°
16.1 15.7 15.1
15.8 15.5 15
25 dB (co-polar)
63° (half-power)
2490–2690 MHz
2°
7° 12°
16
16.1 15.7
15.6 15.8 15.3
27 dB (co-polar)
62° (half-power)
11° (half-power)
10° (half-power)
9.3° (half-power)
8.3° (half-power)
7.8° (half-power)
2°–12°
2°–12°
2°–12°
2°–12°
2°–12°
2° 7° 12° T
18 18 18 dB
18 15 15 dB
2° 7° 12° T
17 17 17 dB
17 16 16 dB
2° 7° 12° T
17 17 16 dB
17 16 14 dB
2° 7° 12° T
18 17 18
16 16 15
2° 7° 12° T
18 17 18 dB
16 15 15 dB
18 dB (typical)
10 dB
22 dB (typical)
10 dB
23 dB (typical)
10 dB
200 watts (per input)
400 watts (total power)
22 dB (typical)
8 dB
25 dB (typical)
10 dB
1710–2690 MHz
10
30
0°
6
20
30
0°
°
60
20
°
30
270°
90°
12
0°
0°
24
270°
90°
0°
180°
0°
21
0°
0°
15
0°
180°
Horizontal pattern
45°- polarization
12
0°
24
15
21
3
10
0°
30
2.625 inches 0.125
(68 mm 4)
0°
30
0°
3
0°
30
°
33
33
0°
Vertical pattern
45°- polarization
2°–12° electrical downtilt
81.4 inches
(2067 mm)
79.8 inches
(2027 mm)
78.6 inches
(1997 mm)
1710–2690
–45°
6 inches
(152 mm)
790–960
–45°
790–960
+45°
7 16
7 16
1710–2690
+45°
1710–2690 1710–2690
+45°
–45°
7 16 7 16
7 16
7 16
11.8 inches
(300 mm)
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
62
800 10676
65° Triple Band Panel Antenna
Mounting Clamps Included
Antenna 1
Antenna 2
Antenna 3
HPBW
790–960
X
65°
1710–2170
X
65°
2490–2690
X
65°
Adj. Electrical Downtilt
0.5°–9.5°
0°–6°
0°–6°
Triple Band (MHz)
Dual Polarization
Manual, or optional remote control
General specifications
o
0o
30
3
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
Horizontal pattern
45°- polarization
o
0o
0o
3
30
880–960 MHz
17.1 17.2 17
0.5° 5° 9.5°
25 dB (co-polar)
33
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
65° (half-power)
15
0o
180o
Vertical pattern
45°- polarization
0.5°–9.5° electrical downtilt
7.1° (half-power)
0.5°–9.5°
Profile PA4
0.5° 5°
18 18
9.5° T
16 dB
22 dB
10 dB
1710 to 2690 MHz
0o
33
0o
3
30
o
790–862 MHz
824–894 MHz
Average gain (dBi)
16.8 16.7 16.5
17 17 16.8
Tilt
0.5° 5° 9.5°
0.5° 5° 9.5°
Front-to-back ratio
25 dB (co-polar)
25 dB (co-polar)
(180° 30°)
Maximum input power
500 watts (per input)
(at 50°C)
1000 watts (total power)
+45° and -45° polarization 68° (half-power)
67° (half-power)
horizontal beamwidth
+45° and -45° polarization 7.5° (half-power)
7.4° (half-power)
vertical beamwidth
Electrical downtilt
0.5°–9.5°
0.5°–9.5°
continuously adjustable
(manual or optional remote control)
Min. suppression for first
0.5° 5° 9.5° T
0.5° 5° 9.5° T
sidelobe above main beam 18 16 14 dB
18 17 15 dB
Cross polar ratio (typical)
Main direction
0°
24 dB
23 dB
Sector
60°
10 dB
10 dB
0o
Specifications
790–960 MHz
33
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
intrasystem
Isolation
intrasystem
intersystem
790–960 MHz
1710–2170 MHz
2490–2690 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
6 x 7-16 DIN female
30 dB (790–960 MHz)
28 dB (1710–2170 MHz) (2490–2690 MHz)
30 dB (790–960 // 1710–2170 MHz // 2490–2690 MHz)
21
requency range
10
30
0o
2490–2690 MHz
17.8 17.8 17.6
0°
3° 6°
25 dB (co-polar)
270o
90o
12
0o
0o
24
21
63 ° (half-power)
4.6° (half-power)
3.5° (half-power)
4.4° (half-power)
Horizontal pattern
45°- polarization
0°–6°
0o
3
10
30
0o
0°–6°
180o
0o
15
200 watts (per input)
400 watts (total power)
63° (half-power)
62° (half-power)
30
o
1920–2170 MHz
18.1 18.1 17.4
0° 3° 6°
25 dB (co-polar)
0o
1850–1990 MHz
17 17 17.5
0° 3° 6°
25 dB (co-polar)
0o
33
60
20
0°–6°
270o
0° 3° 6° T
18 17 17 dB
0°
18
3° 6° T
18 18 dB
90o
12
0o
0o
24
o
0° 3° 6° T
18 18 17 dB
22 dB
10 dB
23 dB
10 dB
o
30
25 dB
10 dB
180o
0o
15
1710–1880 MHz
Average gain (dBi)
18 18 17.6
Tilt
0°
3° 6°
Front-to-back ratio
25 dB (co-polar)
(180° 30°)
Maximum input power
(at 50°C)
+45° and -45° polarization 62° (half-power)
horizontal beamwidth
+45° and -45° polarization 4.8° (half-power)
vertical beamwidth
Electrical downtilt
0°–6°
continuously adjustable
(manual or optional remote control)
Min. suppression for first
0° 3° 6° T
sidelobe above main beam 18 16 16 dB
Cross polar ratio (typical)
Main direction
0°
18 dB
Sector
60°
10 dB
o
30
21
0
Specifications
60
20
Vertical pattern
45°- polarization
0°–6° electrical downtilt
11373-C
936.4045/a
63
800 10676
65° Triple Band Panel Antenna
Mechanical specifications
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
68.3 lb (31 kg)
72.8 lb (33 kg) clamps included
103.2 x 11.8 x 6 inches
(2622 x 300 x 152 mm)
at 93 mph (150kph)
311 lbf / 117 lbf / 335 lbf
(1380 N) / (520 N) / (1490 N)
H (Heavy)
120 mph (200 kph)
116.2 x 12.7 x 7.5 inches
(2951 x 322 x 190 mm)
77.2 lb (35 kg)
2.625 inches 0.125
(68 mm 4)
106 inches
(2692 mm)
104.4 inches
(2652 mm)
103.2 inches
(2622 mm)
6 inches
(152 mm)
11.8 inches
(300 mm)
1710–2170
–45o
790–960
–45o
790–960
+45o
7-16
7-16
1710–2170
+45o
2490–2690 2490–2690
+45o
–45o
7-16 7-16
7-16
7-16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
64
NEW
65° 2 x Dual Band Panel Antenna
Mounting Clamps Included
2 x Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
Antenna 3
Antenna 4
790–960
X
65°
790–960
X
65°
1710–2180
X
60°
1710–2180
X
60°
0°–10°
0°–10°
0°–6°
0°–6°
790–960 MHz
0°
90°
270°
12
0°
12
0°
24
0°
21
0°
Horizontal pattern
45°- polarization
180°
0°
15
21
°
90°
0°
0°
24
Vertical pattern
45°- polarization
0°–10° electrical downtilt
1710–2180 MHz
0°
30
°
°
60
20
30
0°
30
270°
90°
12
270°
90°
0°
21
0°
180°
0°
15
15
0°
12
0°
24
0°
0°
21
°
60
20
30
180°
3
10
10
30
30
°
0°
0°
3
33
0°
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
0°–6° electrical downtilt
790–862 MHz
0° 5° 10° T
15.4 15.7 15.3
27 dB (co-polar)
880–960 MHz
0° 5° 10° T
15.9 16.1 15.4
28 dB (co-polar)
1710–1880 MHz
0°
3° 6° T
18.4 18.5 18.1
30 dB (co-polar)
67° (half-power)
65° (half-power)
11° (half-power) 10.7° (half-power)
0°–10°
0°–10°
(manual or optional remote control)
0° 5° 10° T
0° 5° 10° T
17 17 17 dB
17 17 18 dB
63° (half-power)
10° (half-power)
0°–10°
60° (half-power)
5° (half-power)
0°–6°
0° 5° 10° T
17 17 16 dB
0°
16
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
1.5 dB
3°
60
20
30
270°
180°
30
°
°
30
30
30 dB (790–960 // 790–960 MHz)
30 dB (790–960 // 1710–2180 MHz)
30 dB (1710–2180 // 1710–2180 MHz)
70.5 lb (32 kg)
80 lb (34 kg) clamps included
76.1 x 22.7 x 5.2 inches
(1934 x 576 x 133 mm)
at 93 mph (150kph)
347 lbf / 75 lbf / 403 lbf
(1540 N) / (330 N) / (1790 N)
H (Heavy)
120 mph (200 kph)
86.7 x 25 x 6.3 inches
(2202 x 634 x 159 mm)
824–894 MHz
0° 5° 10° T
15.6 16 15.4
27 dB (co-polar)
500 watts (per input)
1000 watts (total power)
0°
20
0°
Gain (average)
(dbi)
Front-to-back ratio
Maximum input power
(at 50°C)
+45° and -45° polarization
horizontal beamwidth
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
Tracking, average
Squint
3
10
°
60
24
Specifications
33
0°
0°
Mounting category
Wind survival rating
Shipping dimensions
30
33
Wind load
Front/Side/Rear
0°
10
0°
Dimensions
3
15
Weight
0°
intersystem
33
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
8 x 7-16 DIN female
30 dB
0°
30
General specifications
Frequency range
800 10825
3° 6° T
15 14 dB
1850–1990 MHz
0° 3° 6° T
18.5 18.7 18.1
30 dB (co-polar)
250 watts (per input)
500 watts (total power)
1920–2180 MHz
0°
3° 6° T
18.3 18.5 18.1
30 dB (co-polar)
60° (half-power)
4.8° (half-power)
0°–6°
60° (half-power)
4.6° (half-power)
0°–6°
0° 3° 6° T
17 16 15 dB
0°
17
25 dB (typical)
10 dB
0.5 dB
2.5°
25 dB (typical)
10 dB
11318-C
936.4280/a
3° 6° T
16 15 dB
65
800 10825
65° 2 x Dual Band Panel Antenna
2.8 inches
(72 mm)
79 inches
(2006 mm)
77.4 inches
(1966 mm)
76.1 inches
(1934 mm)
10 21 0
17
i
790 960
it
10 21 0
17
790 960
t
it
it
22.7 inches
(576 mm)
5.2 inches
(133 mm)
790– 960
–45°
1710 –21 0
–45°
790– 960
–45°
1710–21 0
–45°
790– 960
+45°
1710 –21 0
+45°
790– 960
+45°
1710 –21 0
+45°
7 16
7 16
7 16
7 16
7 16
7 16
7 16
7 16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
66
NEW
65° 2 x Dual Band Panel Antenna
Mounting Clamps Included
2 x Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
Antenna 3
Antenna 4
790–960
X
65°
790–960
X
65°
1710–2180
X
60°
1710–2180
X
60°
0°–8°
0°–8°
0°–6°
0°–6°
790–960 MHz
30
0°
30
°
°
30
90° 270°
12
0°
21
0°
0°
Horizontal pattern
45°- polarization
180°
0°
180°
12
0°
24
15
21
90°
0°
0°
24
Vertical pattern
45°- polarization
0°–8° electrical downtilt
1710–2180 MHz
10
30
0°
30
0°
°
30
270°
90°
12
0°
270°
90°
12
0°
0°
24
0°
21
0°
180°
0°
15
15
0°
°
60
20
30
21
3
10
°
60
20
180°
0°
30
30
°
0°
3
33
0°
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
0°–6° electrical downtilt
790–862 MHz
0° 4° 8° T
16.4 16.6 16.4
29 dB (co-polar)
880–960 MHz
0° 4° 8° T
16.5 17 16.4
29 dB (co-polar)
1710–1880 MHz
0°
3° 6° T
18.2 18.4 18
27 dB (co-polar)
66° (half-power)
65° (half-power)
8° (half-power)
7.9° (half-power)
0°–8°
0°–8°
(manual or optional remote control)
0° 4° 8° T
0° 4° 8° T
17 16 16 dB
19 16 16 dB
63° (half-power)
7.5° (half-power)
0°–8°
61° (half-power)
5° (half-power)
0°–6°
0° 4° 8° T
19 17 16 dB
0°
16
27 dB (typical)
12 dB
27 dB (typical)
10 dB
27 dB (typical)
12 dB
28 dB (typical)
10 dB
1.5 dB
3°
60
20
30
270°
30 dB (790–960 // 790–960 MHz)
30 dB (790–960 // 1710–2180 MHz)
30 dB (1710–2180 // 1710–2180 MHz)
86 lb (39 kg)
90.4 lb (41 kg) clamps included
94.4 x 22.7 x 5.2 inches
(2399 x 576 x 133 mm)
at 93 mph (150kph)
434 lbf / 93 lbf / 495 lbf
(1930 N) / (410 N) / (2200 N)
H (Heavy)
120 mph (200 kph)
101.4 x 23.6 x 6.7 inches
(2576 x 600 x 170 mm)
824–894 MHz
0° 4° 8° T
16.5 16.7 16.5
30 dB (co-polar)
500 watts (per input)
1000 watts (total power)
0°
20
0°
Gain (average)
(dbi)
Front-to-back ratio
Maximum input power
(at 50°C)
+45° and -45° polarization
horizontal beamwidth
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
Tracking, average
Squint
3
10
°
60
24
Specifications
33
0°
0°
Mounting category
Wind survival rating
Shipping dimensions
30
33
Wind load
Front/Side/Rear
0°
10
0°
Dimensions
3
15
Weight
0°
intersystem
33
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
8 x 7-16 DIN female
30 dB
0°
30
°
General specifications
Frequency range
800 10826
3° 6° T
15 14 dB
1850–1990 MHz
0° 3° 6° T
18.5 18.5 18
26 dB (co-polar)
250 watts (per input)
500 watts (total power)
1920–2180 MHz
0°
3° 6° T
18.1 18.5 18
26 dB (co-polar)
60° (half-power)
4.8° (half-power)
0°–6°
61° (half-power)
4.4° (half-power)
0°–6°
0° 3° 6° T
16 16 15 dB
0°
16
29 dB (typical)
10 dB
0.5 dB
2.5°
25 dB (typical)
10 dB
11319-B
936.4510/a
3° 6° T
16 15 dB
67
800 10826
65° 2 x Dual Band Panel Antenna
2.8 inches
(72 mm)
97.3 inches
(2472 mm)
95.7 inches
(2432 mm)
94.4 inches
(2399 mm)
10 21 0
17
i
790 960
it
10 21 0
17
790 960
t
it
it
22.7 inches
(576 mm)
5.2 inches
(133 mm)
790– 960
–45°
1710 – 21 0
–45°
790 – 960
–45°
1710–21 0
–45°
790 – 960
+45°
1710 – 21 0
+45°
790 – 960
+45°
1710 – 21 0
+45°
7 16
7 16
7 16
7 16
7 16
7 16
7 16
7 16
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–9 degrees downtilt angle.
Reference the Mechanical Accessories section.
68
NEW
800 10892
65° Penta Band Panel Antenna
Mounting Clamps Included
Antenna 1
Antenna 2
Antenna 3
Antenna 4
Antenna 5
HPBW
698–960
X
65°
1710–2690
X
65°
1710–2690
X
65°
1710–2690
X
65°
1710–2690
X
65°
Adj. Electrical Downtilt
1.5°–10°
2°–12°
2°–12°
2°–12°
2°–12°
Penta Band (MHz)
Dual Polarization
Manual, or optional remote control
698–960 MHz
intrasystem
intersystem
30
°
60
20
°
30
0°
30
12
0°
0°
24
0°
Horizontal pattern
45°-polarization
270°
90°
12
0°
0°
24
0°
90°
21
270°
180°
°
60
20
30
180°
0°
Isolation
0°
3
15
Front-to-back ratio
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Min. sidelobe suppression for
first sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
Maximum input power (at 50°C)
0°
Gain
33
Specifications
30
0°
10
10
0°
Mounting category
Wind survival rating
Shipping dimensions
3
15
Wind load
Front/Side/Rear
0°
0°
Dimensions
33
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Weight
698–960 MHz
1710–2690 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
10 x 7-16 DIN female (long neck)
97 lb (44 kg)
101.4 lb (46 kg) clamps included
105.9 x 14.8 x 6.7 inches
(2691 x 377 x 169 mm)
at 93 mph (150kph)
385 lbf / 126 lbf / 396 lbf
(1710 N) / (560 N) / (1760 N)
H (Heavy)
120 mph (200 kph)
119 x 15.6 x 8.3 inches
(3021 x 397 x 212 mm)
21
Frequency range
30
°
General specifications
Vertical pattern
45°-polarization
1.5°–10° electrical downtilt
698–820 MHz
1.5° 6° 10° T
16.2 16.3 16.2 dBi
25 dB (co-polar)
69° (half-power)
790–862 MHz
1.5° 6° 10° T
16.6 16.7 16.7 dBi
25 dB (co-polar)
67° (half-power)
824–894 MHz
1.5° 6° 10° T
16.9 17 16.9 dBi
25 dB (co-polar)
66° (half-power)
880–960 MHz
1.5° 6° 10° T
17.2 17.4 17.2 dBi
28 dB (co-polar)
65° (half-power)
8.6° (half-power)
7.8° (half-power)
7.6° (half-power)
7.1° (half-power)
1.5°–10°
1.5°–10°
1.5° 6° 10° T
18 17 17 dB
1.5° 6° 10° T
18 16 16 dB
1.5°–10°
1.5°–10°
(manual or optional remote control)
1.5° 6° 10° T
1.5° 6° 10° T
18 16 15 dB
18 17 17 dB
24 dB (typical)
8 dB
24 dB (typical)
24 dB (typical)
8 dB
8 dB
500 watts (per input)
1000 watts (total power)
30 dB
30 dB (698–960 // 1710–2690 MHz)
30 dB (1710–2690 // 1710–2690 MHz)
25 dB (typical)
8 dB
11434-FRO/a
936.A2960/g
69
800 10892
65° Penta Band Panel Antenna
Specifications left side
Gain
System bottom
System top
Front-to-back ratio
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Min. sidelobe suppression for
first sidelobe above main beam
System bottom
System top
Cross polar ratio
Main direction
0°
Sector
60°
Maximum input power (at 50°C)
1920–2170 MHz
2°
7° 12° T
17.6 17.5 17.1 dBi
17
17 16.5 dBi
27 dB (co-polar)
63° (half-power)
2300–2400 MHz
2°
7° 12° T
17 17.2 16.9 dBi
16.5 16.7 16.4 dBi
26 dB (co-polar)
63° (half-power)
2490–2690 MHz
2°
7° 12° T
17.3 17.5 17 dBi
16.7 17 16.5 dBi
25 dB (co-polar)
67° (half-power)
7.3° (half-power)
6.9° (half-power)
6.5° (half-power)
5.7° (half-power)
5.2° (half-power)
2°–12°
2°–12°
2°–12°
2°–12°
2°–12°
2°
7° 12° T
2°
7° 12° T
7° 12° T
2° 7° 12° T
2° 7° 12° T
18 18 15 dB
18 17 14 dB
18 18 15 dB
18 18 15 dB
18 17 14 dB
18 17 14 dB
18 18 16 dB
18 18 15 dB
17 dB (typical)
8 dB
22 dB (typical)
8 dB
1710–1880 MHz
2.5° 7° 12° T
17.2 17.2 17.1 dBi
16.7 16.7 16.8 dBi
25 dB (co-polar)
67° (half-power)
1850–1990 MHz
2.5° 7° 12° T
17.4 17.4 17.2 dBi
16.8 16.9 16.8 dBi
25 dB (co-polar)
66° (half-power)
1920–2170 MHz
2.5° 7° 12° T
17.6 17.7 17.5 dBi
17
17.2 17 dBi
26 dB (co-polar)
66° (half-power)
2300–2400 MHz
2.5° 7° 12° T
17.8 18.1 17.9 dBi
17.2 17.5 17.4 dBi
28 dB (co-polar)
66° (half-power)
2490–2690 MHz
2.5° 7° 12° T
18 18.3 17.6 dBi
17.2 17.6 16.9 dBi
25 dB (co-polar)
64° (half-power)
7.2° (half-power)
6.8° (half-power)
6.4° (half-power)
5.6° (half-power)
5° (half-power)
2.5°–12°
2.5°–12°
2.5°–12°
2.5°–12°
2.5°–12°
2.5° 7° 12° T
2.5° 7° 12° T
2.5° 7° 12° T
2.5° 7° 12° T
2.5° 7° 12° T
17 18 17 dB
16 15 15 dB
18 18 18 dB
18 17 18 dB
18 18 18 dB
18 17 18 dB
18 18 18 dB
17 15 16 dB
17 18 18 dB
16 15 16 dB
17 dB (typical)
9 dB
19 dB (typical)
10 dB
23 dB (typical)
17 dB (typical)
10 dB
8 dB
200 watts (per input)
400 watts (total power)
28 dB
30 dB (698–960 // 1710–2690 MHz)
30 dB (1710–2690 // 1710–2690 MHz)
intrasystem
intersystem
18 dB (typical)
17 dB (typical)
10 dB
9 dB
200 watts (per input)
400 watts (total power)
28 dB
30 dB (698–960 // 1710–2690 MHz)
30 dB (1710–2690 // 1710–2690 MHz)
intrasystem
intersystem
60
20
°
30
0°
12
0°
0°
90°
12
0°
0°
24
30
0°
30
0°
60
20
°
30
270°
90°
12
0°
0°
24
180°
3
Horizontal pattern
45°-polarization
270°
90°
12
0°
0°
24
180°
0°
15
Vertical pattern
45°-polarization
2.5°–12° electrical downtilt
0°
10
°
60
20
0°
15
180°
°
21
0°
°
0
15
°
0
15
Horizontal pattern
45°-polarization
3
30
270°
21
0°
90°
24
70
60
30
270°
0°
10
20
30
180°
30
°
°
30
10
21
0°
0°
3
0°
33
30
0
°
10
1710–2690 MHz system top
0
33
0°
33
0°
33
3
18 dB (typical)
9 dB
30
°
1710–2690 MHz system bottom
0°
16 dB (typical)
8 dB
21
0°
Gain
System bottom
System top
Front-to-back ratio
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
System bottom
System top
Cross polar ratio
Main direction
0°
Sector
60°
Maximum input power (at 50°C)
2°
18 17 15 dB
18 17 15 dB
Specifications right side
Isolation
1850–1990 MHz
2°
7° 12° T
17.5 17.5 17.2 dBi
17 16.8 16.5 dBi
27 dB (co-polar)
63° (half-power)
30
°
Isolation
1710–1880 MHz
2°
7° 12° T
17.2 17.3 17 dBi
16.6 16.6 16.3 dBi
26 dB (co-polar)
64° (half-power)
Vertical pattern
45°-polarization
2.5°–12° electrical downtilt
800 10892
65° Penta Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
105.9 inches
(2691 mm)
6.7 inches
(169 mm)
14.8 inches
(377 mm)
Mounting E uipment
Model
Model
2 x 738 546
(included)
Description
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
4.4 lb (2 kg)
850 10008
Tilt Mount Kit
0–7 degrees downtilt angle.
9.5 lb (4.3 kg)
Reference the Mechanical Accessories section.
71
800 10121V01
88° Dual Band Panel Antenna
Mounting Clamps Included
Antenna 1
Antenna 2
790–960
X
90°
1710–2180
X
90°
0.5°–12.5°
0.5°–10°
Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
General specifications
790–960 MHz
Frequency range
30
o
3
10
10
30
0o
30
0o
o
60
20
30
90o
270o
12
0o
90o
12
0o
0o
0o
24
21
Horizontal pattern
45°- polarization
0o
0o
180o
15
15
0o
24
0o
o
60
20
30
270o
21
30
o
0o
0o
0o
3
33
33
0o
180o
Vertical pattern
45°- polarization
0.5°–12.5° electrical downtilt
0o
3
10
10
30
0o
30
o
0o
30
o
33
0o
33
3
60
20
o
30
0o
60
20
o
30
30
90o 270o
270o
Dimensions
Wind load
Front/Side/Rear
1710–2180 MHz
0o
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
Weight
Mounting category
Wind survival rating
Shipping dimensions
90o
Shipping weight
0o
0o
180o
0o
21
12
o
15
0o
15
180o
Horizontal pattern
45°- polarization
0
24
0o
0o
21
12
o
0
24
790–960 MHz
1710–2180 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female
30 dB
42 dB (790–960 // 1710–2180 MHz)
46.3 lb (21 kg)
50.7 lb (23 kg) clamps included
54.5 x 10.3 x 5.9 inches
(1384 x 262 x 149 mm)
at 93 mph (150kph)
95 lbf / 59 lbf / 140 lbf
(420 N / 260 N / 620 N)
M (Medium)
120 mph (200 kph)
67.6 x 12 x 8 inches
(1716 x 304 x 204 mm)
55.1 lb (25 kg)
Vertical pattern
45°- polarization
0.5°–10° electrical downtilt
Profile PA3
Specifications
790–862 MHz
Average gain (dBi)
13.4 13.4 13.1
Tilt
0.5° 6° 12.5°
Front-to-back ratio
23 dB (co-polar)
Maximum input power
per input (at 50°C)
500 watts
total power
+45° and -45° polarization 88° (half-power)
horizontal beamwidth
+45° and -45° polarization 15° (half-power)
vertical beamwidth
Electrical downtilt
0.5°–12.5°
continuously adjustable
(manual or optional remote control)
Min. sidelobe suppression
for first sidelobe
0.5° 6° 12.5° T
above main beam
16 14 14 dB
average
20 19 16 dB
Front-to-back ratio (copolar)
23 dB
Cross polar ratio (typical)
Main direction
0°
17 dB
Sector
60°
10 dB
average
60°
16 dB
72
11356-B
936.3959/a
824–896 MHz
13.6 13.6 13.4
0.5° 6° 12.5°
23 dB (co-polar)
880–960 MHz
13.9 13.8 13.5
0.5° 6° 12.5°
23 dB (co-polar)
1710–1880 MHz
16.4 16.4 16.2
0.5° 5° 10°
23 dB (co-polar)
1850–1990 MHz
16.4 16.5 16
0.5° 5° 10°
23 dB (co-polar)
1920–2180 MHz
16.4 15.9 15.3
0.5° 5° 10°
23 dB (co-polar)
500 watts
1000 watts
86° (half-power)
500 watts
250 watts
250 watts
88° (half-power)
82° (half-power)
250 watts
500 watts
85° (half-power)
90° (half-power)
14.5° (half-power)
14° (half-power)
7° (half-power)
6.6° (half-power)
6.4° (half-power)
0.5°–12.5°
0.5°–12.5°
0.5°–10°
0.5°–10°
0.5°–10°
0.5° 6° 12.5° T
16 15 14 dB
20 18 17 dB
23 dB
0.5° 6° 12.5° T
18 16 16 dB
22 20 20 dB
23 dB
18 dB
10 dB
16 dB
20 dB
13 dB
19 dB
0.5° 5° 10° T
17 17 16 dB
20 20 18 dB
23 dB
17 dB
10 dB
17 dB
0.5° 5° 10° T
17 18 16 dB
21 22 17 dB
23 dB
0.5° 5° 10° T
18 16 16 dB
20 20 16 dB
23 dB
16 dB
12 dB
19 dB
15 dB
10 dB
19 dB
800 10121V01
88° Dual Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
54.5 inches
(1384 mm)
56.2 inches
(1427 mm)
57.8 inches
(1467 mm)
5.9 inches
(149 mm)
10.3 inches
(262 mm)
RCU
790–960
790–960
RCU
–45° +45° 1710–2180
–45°
+45°
1710–2180
Layout of interface
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
73
800 10122V01
88° Dual Band Panel Antenna
Mounting Clamps Included
Dual Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
790–960
X
90°
1710–2180
X
90°
0°–10°
0°–6°
Adj. Electrical Downtilt
Manual, or optional remote control
790–960 MHz
General specifications
0o
0o
30
o
60
20
0o
90o
270o
12
0o
90o
12
0o
0o
24
0o
24
0o
21
0o
Horizontal pattern
45°- polarization
180o
0o
15
15
0o
o
30
270o
21
60
20
30
180o
Frequency range
10
10
30
30
o
30
o
3
0o
0o
3
33
33
0o
Vertical pattern
45°- polarization
0°–10° electrical downtilt
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
Weight
Dimensions
Wind load
Front/Side/Rear
1710–2180 MHz
30
o
3
10
10
30
0o
30
o
0o
0o
3
33
0o
33
0o
30
0o
o
60
20
60
20
o
Mounting category
Wind survival rating
Shipping dimensions
30
30
270o
90o
270o
90o
Shipping weight
0o
2
0o
21
180o
0o
0o
21
0o
15
15
180o
Horizontal pattern
45°- polarization
12
o
0
24
0o
12
o
40
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
30 dB
42 dB (790–960 // 1710–2180 MHz)
59.5 lb (27 kg)
63.9 lb (29 kg) clamps included
75.5 x 10.3 x 5.9 inches
(1917 x 262 x 149 mm)
at 93 mph (150kph)
131 lbf / 81 lbf / 196 lbf
(580 N / 360 N / 870 N)
M (Medium)
120 mph (200 kph)
88.5 x 12 x 8 inches
(2249 x 304 x 204 mm)
70.6 lb (32 kg)
Vertical pattern
45°- polarization
0°–6° electrical downtilt
Profile PA3
Specifications
790–862 MHz
Average gain (dBi)
14.8 14.8 14.8
Tilt
0° 5° 10°
Front-to-back ratio (180° 30°) 23 dB
Maximum input power (at 50°C)
per input
500 watts
total
+45° and -45° polarization 88° (half-power)
horizontal beamwidth
+45° and -45° polarization 11° (half-power)
vertical beamwidth
Electrical downtilt
0°–10°
continuously adjustable
(manual or optional remote control)
Min. sidelobe suppression for 0° 5° 10° T
1st sidelobe above main beam 18 16 14 dB
Cross polar ratio (typical)
Main direction
0°
18 dB
Sector
60°
10 dB
average
60°
16 dB
74
11359-A
936.3960/b
824–896 MHz
14.8 15 14.8
0° 5° 10°
23 dB
880–960 MHz
14.9 15.1 14.9
0° 5° 10°
23 dB
1710–1880 MHz
17.7 17.8 17.7
0°
3° 6°
23 dB
1850–1990 MHz
17.7 18 17.6
0° 3° 6°
23 dB
1920–2180 MHz
17.6 17.8 17.4
0°
3° 6°
23 dB
500 watts
1000 watts
87° (half-power)
500 watts
250 watts
250 watts
88° (half-power)
82° (half-power)
250 watts
500 watts
85° (half-power)
90° (half-power)
10.9° (half-power)
10.5° (half-power)
5.5° (half-power)
5.2° (half-power)
5° (half-power)
0°–10°
0°–10°
0°–6°
0°–6°
0°–6°
0° 5° 10° T
16 16 15 dB
0° 5° 10° T
16 16 15 dB
0° 3° 6° T
18 18 16 dB
0° 3° 6° T
18 18 16 dB
0° 3° 6° T
18 18 16 dB
18 dB
10 dB
16 dB
20 dB
13 dB
19 dB
17 dB
10 dB
17 dB
16 dB
12 dB
19 dB
15 dB
10 dB
19 dB
800 10122V01
88° Dual Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
75.5 inches
(1917 mm)
77.2 inches
(1960 mm)
78.7 inches
(2000 mm)
5.9 inches
(149 mm)
10.3 inches
(262 mm)
RCU
790–960
790–960
RCU
–45° +45° 1710–2180
–45°
+45°
1710–2180
Layout of interface
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
75
800 10123V03
88° Dual Band Panel Antenna
Mounting Clamps Included
Dual Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
790–960 MHz
0o
o
60
20
30
0o
0°–6°
General specifications
3
Frequency range
60
90o 270o
12
0o
o
90o
12
0o
0o
24
21
0o
Horizontal pattern
45°- polarization
180o
0o
15
15
0o
0o
24
0o
0.5°–7°
30
270o
21
1710–2180
X
90°
0o
20
30
180o
790–960
X
90°
10
10
30
Antenna 2
30
o
o
30
0o
0o
3
33
33
0o
Antenna 1
Vertical pattern
45°- polarization
0.5°–7° electrical downtilt
0o
3
10
10
30
0o
30
o
0o
30
o
33
0o
33
3
o
60
20
30
0o
60
20
o
30
30
90o 270o
270o
Dimensions
Wind load
Front/Side/Rear
1710–2180 MHz
0o
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
Weight
Mounting category
Wind survival rating
Shipping dimensions
90o
Shipping weight
180o
0o
0o
21
0o
15
0o
15
180o
Horizontal pattern
45°- polarization
12
0o
24
0o
0o
21
12
0o
24
790–960 MHz
1710–2180 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female (long neck)
30 dB
45 dB (790 –960 // 1710–2180 MHz)
72.8 lb (33 kg)
77.2 lb (35.kg) clamps included
103.7 x 10.3 x 5.9 inches
(2635 x 262 x 149 mm)
at 93 mph (150kph)
189 lbf / 115 lbf / 284 lbf
(840 N) / (510 N) / (1260 N)
H (Heavy)
120 mph (200 kph)
116.8 x 11.1 x 7.2 inches
(2966 x 282 x 182 mm)
89.9 lb (40.8 kg)
Vertical pattern
45°- polarization
0°–6° electrical downtilt
Profile PA3
Specifications
790–862 MHz
Average gain (dBi)
16.1 16.2 16.1
Tilt
0.5° 4° 7°
Front-to-back ratio
25 dB (co-polar)
+45° and -45° polarization 86° (half-power)
horizontal beamwidth
+45° and -45° polarization 7.3° (half-power)
vertical beamwidth
Electrical downtilt
0.5°–7°
continuously adjustable
(manual or optional remote control)
Vertical Pattern–Min. sidelobe 0.5° 4° 7° T
suppression for first
15 14 14 dB
sidelobe above main beam
Cross polar ratio (typical)
Main direction
0°
18 dB
Sector
60°
10 dB
average
60°
16 dB
Maximum input power
per input (at 50°C)
total (at 50°C)
Tracking, average
Squint
76
11363-C
936.4017/b
824–894 MHz
16.3 16.4 16.3
0.5° 4° 7°
25 dB (co-polar)
86° (half-power)
880–960 MHz
16.5 16.6 16.5
0.5° 4° 7°
25 dB (co-polar)
86° (half-power)
1710–1880 MHz
17.8 17.7 17.4
0°
3° 6°
23 dB (co-polar)
84° (half-power)
1850–1990 MHz
1920–2180 MHz
Profile17.9
PA317.8 17.3
18 17.9 17.4
0° 3° 6°
0°
3° 6°
23 dB (co-polar)
23 dB (co-polar)
85° (half-power)
88° (half-power)
7.2° (half-power)
6.9° (half-power)
4.8° (half-power)
4.5° (half-power)
4.2° (half-power)
0.5°–7°
0.5°–7°
0°–6°
0°–6°
0°–6°
0.5° 4° 7° T
15 14 14 dB
18 dB
10 dB
16 dB
790–960 MHz
500 watts
1000 watts
0.5 dB
3°
0.5° 4° 7° T
15 14 15 dB
0° 3° 6° T
18 17 16 dB
20 dB
13 dB
19 dB
16 dB
10 dB
16 dB
0° 3° 6° T
18 17 17 dB
16 dB
12 dB
17 dB
1710–2180 MHz
250 watts
500 watts
0.5 dB
3°
0° 3° 6° T
18 16 17 dB
15 dB
10 dB
18 dB
800 10123V03
88° Dual Band Panel Antenna
2.625 inches 0.125
(68 mm 4)
103.7 inches
(2635 mm)
105.4 inches
(2677 mm)
107 inches
(2717 mm)
5.9 inches
(149 mm)
10.3 inches
(262 mm)
RCU
790–960
790–960
RCU
–45° +45° 1710–2180
–45°
+45°
1710–2180
Layout of interface
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
77
742 290
90° Dual Band Panel Antenna
Integrated Combiner
Dual Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 2
824–960
V
90°
0°
1710–2170
V
90°
0°
824–960 MHz
o
o
o
o
o
o
o
o
o
o
o
o
H - Plane
Horizontal pattern
Vertical - polarization
o
o
o
o
o
o
E - Plane
Vertical pattern
Vertical - polarization
1710–2170 MHz
o
o
o
o
o
o
o
o
o
o
o
o
o
o
H - Plane
Horizontal pattern
Vertical - polarization
VSWR
824–960 MHz
870–960 MHz
1710–2170 MHz
1710–1990 MHz
Gain
Impedance
Intermodulation (2x20w)
Polarization
Front-to-back ratio
824–960 MHz
1710–2170 MHz
Maximum input power
H-plane beamwidth
824–960 MHz
1710–2170 MHz
E-plane beamwidth
824–960 MHz
1710–2170 MHz
Connector
Weight
Dimensions
o
o
o
o
o
o
o
o
o
Profile PF5
o
824–960 MHz
1710–2170 MHz
o
Frequency range
o
o
o
General specifications
o
o
E - Plane
Vertical pattern
Vertical - polarization
Wind load
Front/Side/Rear
Wind survival rating
Shipping dimensions
Shipping weight
6.1 inches
(155 mm)
1.7:1
1.5:1
1.7:1
1.5:1
7 dBi
50 ohms
IM3: -150 dBc
Vertical / Vertical
18 dB
20 dB
100 watts (at 50°C)
90 degrees (half-power)
82 degrees (half-power)
60 degrees (half-power)
70 degrees (half-power)
1 x 7-16 DIN female
6.2 lb (2.8 kg)
12.9 x 6.1 x 2.7 inches
(328 x 155 x 69 mm)
at 93 mph (150kph)
21 lbf / 6 lbf / 23 lbf
(90 N / 23 N / 100 N)
120 mph (200 kph)
17.5 x 6.8 x 3.6 inches
(444 x 172 x 92 mm)
7.7 lb (3.5 kg)
16.2 inches
(412 mm)
15 inches
(382 mm)
824-960
VPol
12.9 inches
(328 mm)
1710-2170
VPol
C
7-16
Mounting E uipment
2.7 inches
(69 mm)
78
10779-E
936.2424/c
Model
2 x 131 1847
Description
Mounting Kit for 2 to 5.7 inch
(34 to 60 mm) OD mast.
Reference the Mechanical Accessories section.
800 10046V01
Integrated Combiner
Mounting Clamps Included
90° Dual Band Panel Antenna
Dual Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 2
824–960
V
90°
0°
1710–2170
V
82°
0°
824–960 MHz
o
o
o
o
o
o
o
o
o
E - Plane
Vertical pattern
Vertical - polarization
1710–2170 MHz
o
o
o
o
o
o
6.1 inches
(155 mm)
o
o
o
o
o
H - Plane
Horizontal pattern
Vertical - polarization
o
o
o
o
o
C
o
o
1710-2170
VPol
o
Mounting category
Wind survival rating
Shipping dimensions
o
o
o
o
o
33 degrees (half-power)
19 degrees (half-power)
1 x 7-16 DIN female
11 lb (5 kg)
26.1 x 6.1 x 2.7 inches
(662 x 155 x 69 mm)
at 93 mph (150kph)
38 lbf / 13 lbf / 43 lbf
(165 N) / (55 N) / (190 N)
L (Light)
120 mph (200 kph)
31.7 x 6.8 x 3.6 inches
(804 x 172 x 92 mm)
o
H - Plane
Horizontal pattern
Vertical - polarization
o
o
o
o
Wind load
Front/Side/Rear
824-960
VPol
o
18 dB
20 dB
100 watts (at 50°C)
90 degrees (half-power)
82 degrees (half-power)
o
o
10 dBi
11 dBi
50 ohms
IM3: -150 dBc
Vertical / Vertical
1.7:1
1.5:1
1.5:1
o
VSWR
824–960 MHz
870–960 MHz
1710–2170 MHz
Gain
824–960 MHz
1710–2170 MHz
Impedance
Intermodulation (2x20w)
Polarization
Front-to-back ratio
824–960 MHz
1710–2170 MHz
Maximum input power
H-plane beamwidth
824–960 MHz
1710–2170 MHz
E-plane beamwidth
824–960 MHz
1710–2170 MHz
Connector
Weight
Dimensions
o
o
o
o
o
824–960 MHz
1710–2170 MHz
o
Frequency range
General specifications
Profile PF5
E - Plane
Vertical pattern
Vertical - polarization
2.5 inches
(64 mm)
29.4 inches
(746 mm)
28.2 inches
(716 mm)
26.1 inches
(662 mm)
7-16
Mounting E uipment
Model
2 x 131 1847
Description
Mounting Kit for 2 to 5.7 inch
(34 to 60 mm) OD mast.
Reference the Mechanical Accessories section.
2.7 inches
(69 mm)
11437-A
936.4460
79
840 10515, 840 10516
700 MHz Dual Band Trisector Antenna
Antenna 1
Antenna 2
Antenna 3
Antenna 4
Antenna 5
Antenna 6
698–894
X
65°
0°
1710–2170
X
65 °
0°
698–894
X
65°
0°
1710–2170
X
65°
0°
698–894
X
65°
0°
1710–2170
X
65°
0°
Dual Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
General specifications
Frequency range
698–894 MHz
1710–2170 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° upper and lower band
-45° upper and lower band
12 x 7-16 DIN female
30 dB
40 dB (698–894 // 1710–2170 MHz)
Brown or grey
50 lb (22.7 kg)
24 inches (609 mm)
16 inches (407 mm)
at 93 mph (150kph)
32 lbf (138 N)
100 mph (160 kph)
32 x 20 x 19 inches
(813 x 508 x 483 mm)
52 lb (23.6 kg)
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
Radome color
Weight
Height
Radome diameter
Wind load
Side
Wind survival rating
Shipping dimensions
Shipping weight
1710–2170 MHz
6
90o
3
270o
3
6
20
30
40
40
12
0o
70
6
90o
3
0o
70
3
6
o
30
20
20
10
6
90o
3
270o
3
6
20
20
10
20
30
30
12
0o
60
70
6
90o
3
50
0o
24
12
0o
60
70
80
80
90
90
180o
0o
180o
10
40
50
0o
24
10
10
20
15
0o
20
0o
21
10
o
60
6
10
15
180o
0o
0o
Gain
Front-to-back ratio
(180° 30°)
Maximum input power
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Cross polar ratio
Main direction
0°
Sector (typical) 60°
90
15
15
Specifications
0o
40
12
60
Vertical pattern
45°- polarization
Horizontal pattern
45°- polarization
30
20
270o
80
90
180o
10
50
0o
24
80
0o
20
10
20
60
21
10
o
10
0o
10
30
60
6
20
20
10
20
50
0o
24
0o
21
20
30
0o
10
o
60
10
21
6
3
3
6
20
3
o
o
30
o
30
0o
0o
0o
o
60
6
30
10
270o
0o
0o
33
0o
0o
3
3
30
0o
33
33
33
0o
30
698–960 MHz
0o
Vertical pattern
45°- polarization
Horizontal pattern
45°- polarization
698–806 MHz
10.4 dBi
24 dB (co-polar)
18 dB (total power)
250 watts (at 50°C)
71° (half-power)
806–894 MHz
1710–1880 MHz
11.6 dBi
13.5 dBi
26 dB (co-polar)
32 dB (co-polar)
20 dB (total power)
24 dB (total power)
250 watts (at 50°C)
200 watts (at 50°C)
65° (half-power)
60° (half-power)
1850–1990 MHz
13.5 dBi
30 dB (co-polar)
26 dB (total power)
200 watts (at 50°C)
62° (half-power)
1920–2170 MHz
13.2 dBi
30 dB (co-polar)
25 dB (total power)
200 watts (at 50°C)
64° (half-power)
37° (half-power)
31° (half-power)
19° (half-power)
17.5° (half-power)
17.5° (half-power)
18 dB
8 dB
25 dB
8 dB
20 dB
9 dB
22 dB
9 dB
25 dB
12 dB
Order Information
11204-E
80
Model
840 10515
840 10516
Description
Brown Trisector Antenna
Grey Trisector Antenna
840 10515, 840 10516
700 MHz Dual Band Trisector Antenna
13.9 inches
(353 mm)
24 inches
(609 mm)
26.8 inches
(682 mm)
1-14 threaded rod
0.5 inches max.
(12.7 mm)
Flat washer
Split ring lock washer
16 inches
(407 mm)
1-14 hex nut (requires a 1½" wrench)
torque setting: 90 lbf·ft (122 N·m)
Avoid obstructing the two vent fittings.
Arrows indicate the direction
of maximum signal strength.
Customer supplied mounting bracket
must fit within a 10 inch (254 mm) circle.
Mounting Equipment:
Designed to be mounted on top of a utility
pole using a custom mounting bracket
supplied by the customer.
81
840 10510, 840 10511
Dual Band Omnidirectional Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 2
698–894
X
360°
0°
1710–2170
X
360°
0°
General specifications
Frequency range
698–894 MHz
1710–2170 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° upper and lower band
-45° upper and lower band
4 x 7-16 DIN female
30 dB
40 dB (698–894 // 1710–2170 MHz)
Brown or grey
45 lb (20.4 kg)
24 inches (609 mm)
16 inches (407 mm)
at 93 mph (150kph)
32 lbf (138 N)
100 mph (160 kph)
32 x 20 x 19 inches
(813 x 508 x 483 mm)
52 lb (23.6 kg)
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation intrasystem
intersystem
Radome color
Weight
Height
Radome diameter
Wind load
Side
Wind survival rating
Shipping dimensions
Shipping weight
698–894 MHz
30
0n
90n
12
0n
270n
90n
12
0n
21
0n
0n
24
180n
Vertical pattern
45°- polarization
880 MHz
698–806 MHz
806–894 MHz
4.5 dBi
6.5 dBi
(with 1–4 dB nulls, typical)
250 watts (at 50°C) 250 watts (at 50°C)
37° (half-power)
30° (half-power)
90n
12
0n
0n
24
Horizontal pattern
45°- polarization
1945 MHz
270n
90n
12
0n
0n
24
180n
Vertical pattern
45°- polarization
1945 MHz
1710–1880 MHz
1850–1990 MHz
9 dBi
9 dBi
(with 6–10 dB nulls, typical)
200 watts (at 50°C) 200 watts (at 50°C)
19° (half-power)
17° (half-power)
1920–2170 MHz
8.5 dBi
200 watts (at 50°C)
17.5° (half-power)
Order Information
11202-E
82
Model
840 10510
840 10511
n
60
20
30
270n
180n
3
30
n
30
n
30
0n
0n
15
Maximum input power
+45° and -45° polarization
vertical beamwidth
20
0n
15
Horizontal pattern
45°- polarization
880 MHz
n
60
30
0n
15
0n
15
21
0n
0n
24
Gain (typical)
30
0n
30
270n
Specifications
n
60
0n
10
10
20
30
3
21
0n
n
60
20
180n
30
n
30
n
10
21
0n
30
0n
3
0n
0n
33
10
1710–2170 MHz
0n
0n
33
3
0n
33
0n
33
0n
Description
Brown Omni Antenna
Grey Omni Antenna
840 10510, 840 10511
Dual Band Omnidirectional Antenna
13.9 inches
(353 mm)
24 inches
(609 mm)
26.8 inches
(682 mm)
1-14 threaded rod
0.5 inches max.
(12.7 mm)
Flat washer
Split ring lock washer
16 inches
(407 mm)
1-14 hex nut (requires a 1½" wrench)
torque setting: 90 lbf·ft (122 N·m)
Avoid obstructing the two vent fittings.
Arrows indicate the direction
of maximum signal strength.
Customer supplied mounting bracket
must fit within a 10 inch (254 mm) circle.
Mounting Equipment:
Designed to be mounted on top of a utility
pole using a custom mounting bracket
supplied by the customer.
83
Notes
84
700 and 800 MHz X-POL Panel Antennas
698-960 MHz
•
X Polarization
Horizontal
Beamwidth
Frequency
Gain
Model
Electrical
Downtilt
Polarization
Height
30°
790–960 MHz
17.6 dBi
800 10642
0°
+45° and -45°
51.1 inches
790–960 MHz
20.4 dBi
800 10643
0°
+45° and -45°
88.7 inches
95
790–960 MHz
20.2 dBi
800 10456V02
0°– 16° ADT*
+45° and -45°
88.7 inches
93
65°
88
698–894 MHz
8.5 dBi
840 10535
0°
+45° and -45°
13.1 inches
104
790–960 MHz
8.5 dBi
739 619V01
0°
+45° and -45°
10.1 inches
105
806–960 MHz
12 dBi
739 620V01
0°
+45° and -45°
25.8 inches
106
698–894 MHz
14.2 dBi
800 10734V01
0°– 16° ADT*
+45° and -45°
53.3 inches
87
790–960 MHz
14.7 dBi
800 10207V01
6°
+45° and -45°
50.9 inches
107
790–960 MHz
14.7 dBi
800 10303V02
0°– 14° ADT*
+45° and -45°
50.9 inches
96
790–960 MHz
14.7 dBi
800 10202V02
0°
+45° and -45°
50.9 inches
108
698–894 MHz
15.5 dBi
800 10735V01
0°– 10° ADT*
+45° and -45°
76.1 inches
89
790–960 MHz
16.3 dBi
800 10634V01
0°– 10° ADT*
+45° and -45°
76.1 inches
97
102
2 x 824–960 MHz
16.5 dBi
800 10517V01
0°– 8° ADT*
+45° and -45°
103.6 inches
698–894 MHz
16.4 dBi
800 10736V01
0.5°– 9.5° ADT*
+45° and -45°
96 inches
790–960 MHz
16.5 dBi
800 10294V02
6°
+45° and -45°
76.1 inches
109
790–960 MHz
16.6 dBi
800 10203V02
0°
+45° and -45°
76.1 inches
110
790–960 MHz
16.9 dBi
800 10305V02
0°– 8° ADT*
+45° and -45°
88.7 inches
98
790–960 MHz
17.1 dBi
800 10306V02
0.5°– 9.5° ADT*
+45° and -45°
101.3 inches
99
91
790–960 MHz
17.5 dBi
800 10307V01
0.5°– 9.5° ADT*
+45° and -45°
101.3 inches
100
790–960 MHz
17.5 dBi
800 10204V02
0°
+45° and -45°
88.7 inches
111
790–960 MHz
17.9 dBi
800 10215V01
0°
+45° and -45°
101.3 inches
112
790–960 MHz
17.9 dBi
800 10208V01
6°
+45° and -45°
101.3 inches
113
790–960 MHz
13.3 dBi
800 10308V01
0°–14° ADT*
+45° and -45°
50.9 inches
115
790–960 MHz
14.9 dBi
800 10309V01
0°–10° ADT*
+45° and -45°
76.1 inches
116
790–960 MHz
16 dBi
800 10310V01
0.5°–9.5° ADT*
+45° and -45°
101.3 inches
117
790–960 MHz
16.3 dBi
800 10300V01
0.5°–9.5° ADT*
+45° and -45°
101.3 inches
118
790–960 MHz
16.7 dBi
800 10217V01
0°
+45° and -45°
101.3 inches
114
824-960 MHz
•
XX Polarization
Horizontal
Beamwidth
Frequency
Gain
Model
Electrical
Downtilt
Polarization
Height
65°
2 x 824–960 MHz
15.5 dBi
800 10516V01
0°– 10° ADT*
+45° and -45°
79.7 inches
101
2 x 790–960 MHz
17 dBi
800 10647V01
0°– 8° ADT*
+45° and -45°
88.7 inches
103
2 x 790–960 MHz
14.6 dBi
800 10816
0°–10° ADT*
+45° and -45°
103.6 inches
119
2 x 790–960 MHz
15.7 dBi
800 10817
0°– 8° ADT*
+45° and -45°
103.6 inches
120
90°
700 - 960 MHz
X-Pol Panel Antennas
85°
Page
*ADT - Adjustable Electrical Downtilt
Page
85
700 - 960 MHz
X-Pol Panel Antennas
700 and 800 MHz X-POL Panel Antennas
86
800 10734V01
Integrated Replaceable RET Motor
Mounting Clamps Included
65° Single Band Panel Antenna
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Internal remote control
698–894
X
65°
0°–16°
General specifications
698–894 MHz
o
0o
3
30
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
21
180o
0o
15
Isolation
Electrical downtilt
698–894 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female (long neck)
(bottom mounted)
30 dB
0–16 degrees (continuously adjustable)
33
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Horizontal pattern
45°- polarization
Gain
Front-to-back ratio
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Min. sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
698–806 MHz
14.2 dBi
30 dB (co-polar)
32 dB (average)
68° (half-power)
824–894 MHz
14.8 dBi
30 dB (co-polar)
33 dB (average)
65° (half-power)
16° (half-power)
14.8° (half-power)
0° 8° 16° T
16 17 17 dB
16 19 20 dB
0° 8° 16° T
18 17 16 dB
20 20 20 dB
24 dB (typical)
10 dB, Average: 15 dB
23 dB (typical)
10 dB, Average: 16 dB
3
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
21
180o
0o
Specifications
0o
15
Adjustment time (full range)
Adjustment cycles
Temperature range
Certification
Replacement number
0o
Power supply
Power consumption
3GPP/AISG 2.0
AISG 1.1 and 3GPP/AISG 2.0 compliant
2 x 8 pin connector acc. IEC 60130-9
according to AISG:
– IRT in (male): Control / Daisy chain in
– IRT in (female): Daisy chain out
10–30 V
1 watt (standby)
8.5 watts (motor activated)
40 sec.
50,000
-40– +60° C
FCC 15.107 Class B Computing Devices
860 10149 (see page 189)
33
Logical interface ex factory1
Protocols
Hardware interface2
30
o
RET motor preinstalled specifications
Vertical pattern
45°- polarization
0°–16° electrical downtilt
Profile PC3
1)
The protocol of the logical interface can be
switched from 3GPP/AISG 2.0 to AISG 1.1 and
vice versa with a vendor specific command. Startup operation of the RCU 86010149 is possible in
an RET system supporting AISG 1.1 or supporting
3GPP/AISG 2.0 after performing a layer 2 reset
before address assignment. The protocol can also
be changed as follows: AISG 1.1 to 3GPP: Enter
“3GPP” into the additional data filed “Installer’s
ID” and perform a layer 7 reset or a power reset.
3GPP to AISG 1.1: Enter “AISG 1” into the
additional datafield “Installer’s ID” and perform a
layer 2 reset or a power reset. After switching the
protocol any other information can be entered into
the “Installer’s ID” field.
2)
The tightning torque for fixing the connector must
be 0.5 – 1.0 Nm ( hand-tightened’). The connector
should be tightened by hand only!
11385-A
936.4272
87
800 10734V01
65° Single Band Panel Antenna
Mechanical specifications
Weight
24.3 lb (11 kg)
28.7 lb (13 kg) clamps included
36.8 lb (16.7 kg) clamps and tilt kit included
53.3 x 11.9 x 3.9 inches (1355 x 303 x 99 mm)
at 93 mph (150kph)
140 lbf / 45 lbf / 160 lbf
(620 N) / (200 N) / (710 N)
M (Medium)
150 mph (240 kph)
56.3 x 12.4 x 4.5 inches (1430 x 315 x 115 mm)
33.1 lb (15 kg)
2-point hot-dip galvanized with
stainless steel hardware for 2 to 4.5 inch
(50 to 115 mm) OD masts.
Dimensions
HxWxD
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
Mounting bracket
(included)
2.625 inches 0.125
(68 mm 4)
56.9 inches
(1446 mm)
55.4 inches
(1406 mm)
KATHREIN
53.3 inches
(1355 mm)
860 10149
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note: Refer to part number
860 10149 for the
specifications of the
remote control actuator.
3.9 inches
(99 mm)
11.9 inches
(303 mm)
in
IRT
out
8pin
8pin
male female
698–894
+45o
698–894
–45o
7-16
7-16
Order Information
Model
800 10734V01
Description
Antenna with 738 546 mounting brackets
0°–16° electrical downtilt
800 10734V01K
Antenna with 738 546 mounting brackets
and 850 10013 mechanical tilt bracket
0°–16° electrical downtilt
Reference the Mechanical Accessories section.
88
800 10735V01
Integrated Replaceable RET Motor
Mounting Clamps Included
65° Single Band Panel Antenna
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Internal remote control
698–894
X
65°
0°–10°
General specifications
698–894 MHz
60
20
o
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
Horizontal pattern
45°- polarization
3
30
o
0o
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
21
180o
0o
15
3GPP/AISG 2.0
AISG 1.1 and 3GPP/AISG 2.0 compliant
2 x 8 pin connector acc. IEC 60130-9
according to AISG:
– IRT in (male): Control / Daisy chain in
– IRT in (female): Daisy chain out
10–30 V
1 watt (standby)
8.5 watts (motor activated)
40 sec.
50,000
-40– +60° C
FCC 15.107 Class B Computing Devices
860 10149 (see page 189)
0o
Adjustment time (full range)
Adjustment cycles
Temperature range
Certification
Replacement number
30
o
10
0o
33
Power supply
Power consumption
3
30
RET motor preinstalled specifications
Logical interface ex factory1
Protocols
Hardware interface2
0o
0o
Isolation
Electrical downtilt
698–894 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female (long neck)
(bottom mounted)
30 dB
0–10 degrees (continuously adjustable)
33
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Vertical pattern
45°- polarization
0°–10° electrical downtilt
Profile PC3
Specifications
Gain
Front-to-back ratio
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Min. sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
698–806 MHz
15.5 dBi
30 dB (co-polar)
35 dB (average)
67° (half-power)
824–894 MHz
16 dBi
30 dB (co-polar)
35 dB (average)
65° (half-power)
11.3° (half-power)
10° (half-power)
0° 5° 10° T
16 17 17 dB
16 19 20 dB
0° 5° 10° T
18 17 16 dB
20 20 20 dB
25 dB (typical)
11 dB, Average: 15 dB
25 dB (typical)
11 dB, Average: 15 dB
1)
The protocol of the logical interface can be
switched from 3GPP/AISG 2.0 to AISG 1.1 and
vice versa with a vendor specific command. Startup operation of the RCU 86010149 is possible in
an RET system supporting AISG 1.1 or supporting
3GPP/AISG 2.0 after performing a layer 2 reset
before address assignment. The protocol can also
be changed as follows: AISG 1.1 to 3GPP: Enter
“3GPP” into the additional data filed “Installer’s
ID” and perform a layer 7 reset or a power reset.
3GPP to AISG 1.1: Enter “AISG 1” into the
additional datafield “Installer’s ID” and perform a
layer 2 reset or a power reset. After switching the
protocol any other information can be entered into
the “Installer’s ID” field.
2)
The tightning torque for fixing the connector must
be 0.5 – 1.0 Nm ( hand-tightened’). The connector
should be tightened by hand only!
11387-D
936.4273/a
89
800 10735V01
65° Single Band Panel Antenna
Mechanical specifications
Weight
30.9 lb (14 kg)
35.3 lb (16 kg) clamps included
48.3 lb (21.9 kg) clamps and tilt kit included
76.1 x 11.9 x 3.9 inches (1934 x 303 x 99 mm)
at 93 mph (150kph)
203 lbf / 70 lbf / 239 lbf
(900 N / 310 N / 1060 N)
H (Heavy)
150 mph (240 kph)
81.1 x 12.4 x 4.5 inches (2060 x 315 x 115 mm)
39.7 lb (18 kg)
2-point hot-dip galvanized with
stainless steel hardware for 2 to 4.5 inch
(50 to 115 mm) OD masts.
Dimensions
HxWxD
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
Mounting bracket
(included)
2.625 inches 0.125
(68 mm 4)
79.7 inches
(2024 mm)
78.1 inches
(1984 mm)
KATHREIN
76.1 inches
(1934 mm)
860 10149
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note: Refer to part number
860 10149 for the
specifications of the
remote control actuator.
3.9 inches
(99 mm)
11.9 inches
(303 mm)
in
IRT
out
8pin
8pin
male female
698–894
+45o
698–894
–45o
7-16
7-16
Order Information
Model
800 10735V01
Description
Antenna with 738 546 mounting brackets
0°–10° electrical downtilt
800 10735V01K
Antenna with 738 546 mounting bracket and
850 10008 mechanical tilt bracket
0°–10° electrical downtilt
Reference the Mechanical Accessories section.
90
800 10736V01
Integrated Replaceable RET Motor
Mounting Clamps Included
65° Single Band Panel Antenna
Antenna 1
Single Band (MHz)
HPBW
698–894
X
65°
Adj. Electrical Downtilt
0.5°–9.5°
Dual Polarization
Internal remote control
General specifications
0o
12
0o
0o
24
824–894 MHz
17 dBi
30 dB (co-polar)
35 dB (average)
68° (half-power)
9.5° (half-power)
8.6° (half-power)
0.5° 5° 9.5° T
16 16 16 dB
18 18 17 dB
0.5° 5° 9.5° T
18 18 17 dB
20 20 20 dB
25 dB (typical)
11 dB, Average: 15 dB
20 dB (typical)
11 dB, Average: 15 dB
21
0o
3
30
o
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
21
180o
0o
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Min. sidelobe suppression for
first sidelobe above main beam
average
Cross polar ratio
Main direction
0°
Sector
60°
698–806 MHz
16.4 dBi
30 dB (co-polar)
35 dB (average)
67° (half-power)
180o
Horizontal pattern
45°- polarization
15
Gain
Front-to-back ratio
30
o
90o
0o
Specifications
o
30
270o
0o
Adjustment time (full range)
Adjustment cycles
TTemperature range
Certification
Replacement number
60
20
33
Power supply
Power consumption
3GPP/AISG 2.0
AISG 1.1 and 3GPP/AISG 2.0 compliant
2 x 8 pin connector acc. IEC 60130-9
according to AISG:
– IRT in (male): Control / Daisy chain in
– IRT in (female): Daisy chain out
10–30 V
1 watt (standby)
8.5 watts (motor activated)
40 sec.
50,000
-40– +60° C
FCC 15.107 Class B Computing Devices
860 10149 (see page 189)
3
10
30
RET motor preinstalled specifications
Logical interface ex factory1
Protocols
Hardware interface2
0o
15
Isolation
Electrical downtilt
0o
698–894 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female (long neck)
(bottom mounted)
30 dB
0.5–9.5 degrees (continuously adjustable)
33
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Vertical pattern
45°- polarization
0.5°–9.5° electrical downtilt
Profile PC3
1)
The protocol of the logical interface can be
switched from 3GPP/AISG 2.0 to AISG 1.1 and
vice versa with a vendor specific command. Startup operation of the RCU 86010149 is possible in
an RET system supporting AISG 1.1 or supporting
3GPP/AISG 2.0 after performing a layer 2 reset
before address assignment. The protocol can also
be changed as follows: AISG 1.1 to 3GPP: Enter
“3GPP” into the additional data filed “Installer’s
ID” and perform a layer 7 reset or a power reset.
3GPP to AISG 1.1: Enter “AISG 1” into the
additional datafield “Installer’s ID” and perform a
layer 2 reset or a power reset. After switching the
protocol any other information can be entered into
the “Installer’s ID” field.
2)
The tightning torque for fixing the connector must
be 0.5 – 1.0 Nm ( hand-tightened’). The connector
should be tightened by hand only!
11389-D
936.4274/a
91
800 10736V01
65° Single Band Panel Antenna
Mechanical specifications
Weight
Dimensions
HxWxD
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
Mounting bracket
(included)
37.5 lb (17 kg)
41.9 lb (19 kg) clamps included
54.9 lb (24.9 kg) clamps and tilt kit included
96 x 11.9 x 3.9 inches (2438 x 303 x 99 mm)
at 93 mph (150kph)
261 lbf / 88 lbf / 311 lbf
(1160 N) / (390 N) / (1380 N)
H (Heavy)
150 mph (240 kph)
102.4 x 12.4 x 4.5 inches (2600 x 315 x 115 mm)
45.9 lb (20.8 kg)
2-point hot-dip galvanized with
stainless steel hardware for 2 to 4.5 inch
(50 to 115 mm) OD masts.
2.625 inches 0.125
(68 mm 4)
99.6 inches
(2529 mm)
98 inches
(2489 mm)
KATHREIN
96 inches
(2438 mm)
860 10149
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note: Refer to part number
860 10149 for the
specifications of the
remote control actuator.
3.9 inches
(99 mm)
11.9 inches
(303 mm)
in
IRT
out
8pin
8pin
male female
698–894
+45o
698–894
–45o
7-16
7-16
Order Information
Model
800 10736V01
Description
Antenna with 738 546 mounting brackets
0.5°–9.5° electrical downtilt
800 10736V01K
Antenna with 738 546 mounting bracket and
850 10008 mechanical tilt bracket
0.5°–9.5° electrical downtilt
Reference the Mechanical Accessories section.
92
NEW
800 10456V02
30° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
0°–10°
790–960 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
2.5 dB
Squint
Weight
2.0°
48.5 lb (22 kg)
52.9 lb (24 kg) clamps included
88.7 x 22.7 x 3.9 inches
(2254 x 576 x 99 mm)
at 93 mph (150kph)
396 lbf / 75 lbf / 459 lbf
(1760 N) / (330 N) / (2040 N)
H (Heavy)
120 mph (200 kph)
98.4 x 23.6 x 5.9 inches
(2500 x 600 x 150 mm)
61.7 lb (28 kg)
270o
90o
12
0o
0o
24
0o
21
180o
Horizontal pattern
45° - polarization
30
3
o
0o
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
21
180o
0o
15
Average gain
Front-to-back ratio
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
Main direction
0°
o
30
0o
Specifications
60
20
15
Shipping weight
0o
0o
Mounting category
Wind survival rating
Shipping dimensions
10
30
33
Wind load
Front/Side/Rear
3
0o
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking, average
Dimensions
0o
33
General specifications
o
Dual Polarization
790–960
X
30°
30
Single Band (MHz)
Vertical pattern
45°- polarization
0°–10° electrical downtilt
790–862 MHz
824–894 MHz
20 dbi
20.2 dbi
28 dB (co-polar)
29 dB (co-polar)
33° (half-power)
32° (half-power)
9.1° (half-power)
8.8° (half-power)
0.5°–10°
0.5°–10°
(manual or optional remote control)
0°
5° 10° T
0°
5° 10° T
16
13
13 dB
18 18 17 dB
880–960 MHz
20.5 dbi
30 dB (co-polar)
30° (half-power)
8.5° (half-power)
0.5°–10°
25 dB (typical)
20 dB (typical)
23 dB (typical)
0°
18
5°
16
10° T
15 dB
2.625 inches 0.125
(68 mm 4)
790–960
–45o
790–960
+45o
7-16
7-16
90 inches
(2286 mm)
3.9 inches
(99 mm)
91.6 inches
(2326 mm)
88.7 inches
(2254 mm)
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
22.7 inches
(576 mm)
11352-C
936.3907/c
93
NEW
800 10642
30° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
0°
30
°
33
General specifications
0°
3
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking
Squint
Weight
10
30
0°
°
60
20
30
270°
90°
12
0°
0°
24
0°
21
0°
15
180°
Horizontal pattern
45°- polarization
3
30
°
0°
33
0°
10
30
0°
790–960
X
30°
0°
790–960 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
1 dB
1°
26.5 lb (12 kg)
30.9 lb (14 kg) clamps included
51.1 x 22.7 x 3.9 inches
(1298 x 576 x 99 mm)
at 93 mph (150kph)
219 lbf / 41 lbf / 261 lbf
(970 N) / (180 N) / (1160 N)
°
60
20
Dimensions
30
270°
90°
Wind load
Front/Side/Rear
12
0°
0°
24
Mounting category
Wind survival rating
Shipping dimensions
0°
21
0°
15
180°
Vertical pattern
45°- polarization
Specifications
Average gain
Front-to-back ratio
Horizontal beamwidth
Vertical beamwidth
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
Main direction
0°
790–862 MHz
17.5 dbi
30 dB (co-polar)
33° (half-power)
14.5° (half-power)
14 dB
25 dB (typical)
2.5 inches
(64 mm)
53.9 inches
(1370 mm)
52.4 inches
(1330 mm)
51.1 inches
(1298 mm)
22.7 inches
(576 mm)
94
11444-A
936.4312/a
M (Medium)
120 mph (200 kph)
62 x 23.3 x 5.8 inches
(1576 x 592 x 147 mm)
824–894 MHz
17.6 dbi
30 dB (co-polar)
32° (half-power)
14° (half-power)
13 dB
880–960 MHz
18 dbi
30 dB (co-polar)
30° (half-power)
12.8° (half-power)
12 dB
25 dB (typical)
790– 960
–45°
790– 960
+45°
7 16
7 16
25 dB (typical)
3.9 inches
(99 mm)
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10643
30° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
790–960
X
30°
0°
HPBW
Electrical Downtilt
790–862 MHz
20.2 dbi
30 dB (co-polar)
33° (half-power)
8.4° (half-power)
15 dB
30 dB (typical)
270o
90o
12
0o
0o
24
0o
21
180o
Horizontal pattern
45°- polarization
3
30
o
0o
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
21
180o
0o
Average gain
Front-to-back ratio
Horizontal beamwidth
Vertical beamwidth
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
Main direction
0°
o
30
15
Specifications
60
20
0o
Shipping weight
10
0o
15
Mounting category
Wind survival rating
Shipping dimensions
3
30
0o
Wind load
Front/Side/Rear
790–960 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
2 dB
2°
45.2 lb (20.5 kg)
49.6 lb (22.5 kg) clamps included
88.7 x 22.7 x 3.9 inches
(2254 x 576 x 99 mm)
at 93 mph (150kph)
396 lbf / 75 lbf / 459 lbf
(1760 N) / (330 N) / (2040 N)
H (Heavy)
120 mph (200 kph)
99.8 x 23.3 x 5.8 inches
(2536 x 592 x 147 mm)
55.1 lb (25 kg)
33
Dimensions
0o
0o
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking
Squint
Weight
33
General specifications
30
o
Dual Polarization
Vertical pattern
45°- polarization
824–894 MHz
20.4 dbi
30 dB (co-polar)
32° (half-power)
8.2° (half-power)
15 dB
880–960 MHz
20.8 dbi
30 dB (co-polar)
30° (half-power)
7.4° (half-power)
15 dB
26 dB (typical)
23 dB (typical)
2.625 inches 0.125
(68 mm 4)
790–960
–45o
7-16
790–960
+45o
91.6 inches
(2326 mm)
7-16
90 inches
(2286 mm)
88.7 inches
(2254 mm)
3.9 inches
(99 mm)
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
22.7 inches
(576 mm)
11310-B
936.4149/a
95
800 10303V02
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
790–960
X
65°
Adj. Electrical Downtilt
0°–14°
Manual or optional remote control
2.625 inches 0.125
(68 mm 4)
General specifications
Frequency range
VSWR
Front-to-back ratio
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Weight
50.9 inches
(1294 mm)
52.1 inches
(1324 mm)
Dimensions
53.7 inches
(1364 mm)
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Profile PC2
790–960 MHz
1.5:1
25 dB (co-polar)
50 ohms
IM3: -150 dBc
+45° and -45°
400 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
18.7 lb (8.5 kg)
23.1 lb (10.5 kg) clamps included
50.9 x 10.2 x 3.9 inches
(1294 x 259 x 99 mm)
at 93 mph (150kph)
99 lbf / 48 lbf / 138 lbf
(440 N) / (210 N) / (610 N)
M (Medium)
120 mph (200 kph)
62.4 x 11.5 x 5.4 inches
(1586 x 292 x 138 mm)
790–960
–45o
790–960
+45o
7-16
7-16
3.9 inches
(99 mm)
3
30
o
0o
33
10.2 inches
(259 mm)
0o
10
30
0o
60
20
o
Specifications
30
270o
90o
12
0o
0o
o
180o
0
15
21
0o
24
Horizontal pattern
45°- polarization
3
30
o
0o
33
0o
10
30
0o
o
60
20
30
270o
90o
tilt
dBi
Front-to-back ratio
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for:
First sidelobe above horizon
Cross polar ratio
Main direction
0°
Sector
60°
790–862 MHz
824–894 MHz
0°
7° 14°
0°
7°
14°
14.5 14.4 14.3
14.7 14.5 14.4
24 dB (co-polar)
25 dB (co-polar)
67° (half-power)
66° (half-power)
15.7° (half-power)
15.5° (half-power)
0°–14°
0°–14°
(manual or optional remote control)
0° 7° 14° T
0° 7° 14° T
15 14 15 dB
18 15 15 dB
880–960 MHz
0°
7° 14°
15 14.8 14.7
25 dB (co-polar)
65° (half-power)
15° (half-power)
0°–14°
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
0° 7° 14° T
18 15 15 dB
12
0o
0o
180o
0o
15
21
0o
24
Vertical pattern
45°- polarization
0°–14° electrical downtilt
96
Average gain
11368-B
936.3885/b
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10634V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual or optional remote control
790–960
X
65°
0°–10°
2.625 inches 0.125
(68 mm 4)
General specifications
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
790–960 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
400 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
0.5 dB
1.5°
24.3 lb (11 kg)
28.7 lb (13 kg) clamps included
76.1 x 10.2 x 3.9 inches
(1934 x 259 x 99 mm)
at 93 mph (150kph)
153 lbf / 70 lbf / 203 lbf
(680 N) / (310 N) / (900 N)
M (Medium)
120 mph (200 kph)
87.2 x 10.7 x 5.8 inches
(2216 x 272 x 147 mm)
790–960
+45o
7-16
7-16
77.3 inches
(1964 mm)
78.9 inches
(2004 mm)
3.9 inches
(99 mm)
Profile PC2
10.2 inches
(259 mm)
0o
33
790–960
–45o
76.1 inches
(1934 mm)
0o
3
30
o
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking, average
Squint
Weight
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
3
o
0° 5° 10° T
18 18 18 dB
0o
15
180o
Horizontal pattern
45°- polarization
0
33
tilt
dBi
Front-to-back ratio
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for:
first sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
880–960 MHz
0°
5°
10°
16.6 16.8 16.6
25 dB (co-polar)
65° (half-power)
9.7° (half-power)
0°–10°
30
o
Average gain
790–862 MHz
824–894 MHz
0°
5° 10°
0°
5° 10°
16.2 16.4 16.2
16.3 16.6 16.3
24 dB (co-polar)
25 dB (co-polar)
69° (half-power)
68° (half-power)
10° (half-power)
9.9° (half-power)
0°–10°
0°–10°
(manual or optional remote control)
0° 5° 10° T
0° 5° 10° T
18 18 18 dB
18 18 18 dB
21
0o
Specifications
10
30
0o
o
60
20
30
20 dB (typical)
10 dB
20 dB (typical)
10 dB
20 dB (typical)
10 dB
270o
90o
12
0o
0o
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
21
0
180o
0o
15
Mounting E uipment
o
24
Vertical pattern
45°- polarization
0°–10° electrical downtilt
11341-B
936.3816/d
97
800 10305V02
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
790–960
X
65°
Dual Polarization
HPBW
Adj. Electrical Downtilt
0°–8°
Manual or optional remote control
General specifications
2.625 inches 0.125
(68 mm 4)
88.7 inches
(2254 mm)
89.9 inches
(2284 mm)
91.5 inches
(2324 mm)
Frequency range
VSWR
Front-to-back ratio
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking, average
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
3.9 inches
(99 mm)
790–960 MHz
1.5:1
25 dB (co-polar)
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
0.5 dB
2.5°
25.4 lb (11.5 kg)
29.8 lb (13.5 kg) clamps included
88.7 x 10.2 x 3.9 inches
(2254 x 259 x 99 mm)
at 93 mph (150kph)
180 lbf / 88 lbf / 246 lbf
(800 N) / (390 N) / (1090 N)
M (Medium)
120 mph (200 kph)
99.8 x 10.7 x 5.8 inches
(2536 x 272 x 147 mm)
790–960
–45o
790–960
+45o
7-16
7-16
10.2 inches
(259 mm)
Profile PC2
o
3
o
30
0
33
0o
10
30
0o
60
20
o
270o
90o
12
0o
0o
0o
15
21
0o
24
180o
Horizontal pattern
45°- polarization
o
3
30
0o
33
0o
10
30
0o
Specifications
Average gain
30
60
20
o
tilt
dBi
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
790–862 MHz
824–894 MHz
0°
4°
8°
0°
4°
8°
16.8 17 16.7
16.9 17.1 16.9
69° (half-power)
67° (half-power)
9.1° (half-power)
8.8° (half-power)
0°–8°
0°–8°
(manual or optional remote control)
0° 2° 4° 8° T
0° 2° 4° 8° T
18 18 18 16 dB
18 18 18 16 dB
880–960 MHz
0°
4°
8°
17.2 17.4 17
65° (half-power)
8.5° (half-power)
0°–8°
25 dB (typical)
10 dB (typical)
25 dB (typical)
10 dB (typical)
25 dB (typical)
10 dB (typical)
0° 2° 4° 8° T
20 18 17 15 dB
30
270o
90o
12
0o
0o
21
180o
0o
15
0o
24
Vertical pattern
45°- polarization
0°–8° electrical downtilt
98
11369-B
936.3814/c
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–9 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10306V02
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
790–960
X
65°
Adj. Electrical Downtilt
0.5°–9.5°
Dual Polarization
Internal manual or optional remote control
General specifications
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
790–960
–45o
7-16
2.625 inches 0.125
(68 mm 4)
101.3 inches
(2574 mm)
102.5 inches
(2604 mm)
104.1 inches
(2644 mm)
3.9 inches
(99 mm)
790–960
+45o
10.2 inches
(259 mm)
7-16
Profile PC2
66° (half-power)
65° (half-power)
7.7° (half-power)
7.5° (half-power)
7.3° (half-power)
0.5°–9.5°
0.5°–9.5°
0.5°–9.5°
9.5° T
14 dB
5°
15
9.5° T
15 dB
0.5° 5°
20 18
30
270o
90o
12
0o
0o
24
9.5° T
18 dB
3
10
o
60
20
30
270o
90o
12
0o
0o
24
21
0o
25 dB
10 dB
0o
180o
0o
15
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
23 dB
10 dB
180o
Horizontal pattern
45°- polarization
0o
23 dB
10 dB
o
60
20
30
Mounting E uipment
Model
2 x 738 546
0.5°
18
0o
o
0.5°
5°
17 14
3
10
30
21
0o
68° (half-power)
0o
o
880–960 MHz
0.5° 5°
9.5° T
17.3 17.4 17.3 dBi
25 dB (co-polar)
0
15
824–894 MHz
0.5°
5°
9.5° T
17.1 17.2 17.1 dBi
25 dB (co-polar)
0
33
Gain
(average)
Front-to-back ratio
(180° 30°)
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
Cross polar ratio (typical)
Main direction
0°
Sector
60°
790–862 MHz
0.5°
5°
9.5° T
17 17.1 17 dBi
24 dB (co-polar)
0o
33
Specifications
30
o
Dimensions
790–960 MHz
50 ohms
1.5:1
IM3: -153 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female (long neck)
30 dB
1 dB
2°
-25 dB (typical)
30.9 lb (14 kg)
35.3 lb (16 kg) clamps included
101.3 x 10.2 x 3.9 inches
(2574 x 259 x 99 mm)
at 93 mph (150kph)
212 lbf / 99 lbf / 286 lbf
(940 N) / (440 N) / (1270 N)
H (Heavy)
120 mph (200 kph)
113.2 x 10.7 x 5 inches
(2876 x 272 x 127 mm)
30
o
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking
Squint
Null-fill at 0° tilt
Weight
Vertical pattern
45°- polarization
0.5°–9.5° electrical downtilt
11301-B
936.3794/b
99
800 10307V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
790–960
X
65°
Adj. Electrical Downtilt
0.5°–9.5°
Dual Polarization
Internal manual or optional remote control
2.625 inches 0.125
(68 mm 4)
104.1 inches
(2644 mm)
102.5 inches
(2604 mm)
101.3 inches
(2574 mm)
General specifications
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking, average
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
790–960 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
1 dB
2°
28.7 lb (13 kg)
33.1 lb (15 kg) clamps included
101.3 x 10.2 x 3.9 inches
(2574 x 259 x 99 mm)
at 93 mph (150kph)
212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)
H (Heavy)
120 mph (200 kph)
112.4 x 10.7 x 5.8 inches
(2855 x 272 x 147 mm)
3.9 inches
(99 mm)
10.2 inches
(259 mm)
Profile PC2
790–960
–45o
790–960
+45o
7-16
7-16
o
3
30
0o
33
0o
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
180o
0o
15
21
0o
24
Horizontal pattern
45°- polarization
3
30
o
0o
33
0o
10
30
0o
o
60
20
30
270o
90o
Gain
(average)
Front-to-back ratio
(180° 30°)
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
790–862 MHz
0.5°
5°
9.5° T
17.4 17.5 17.4 dBi
24 dB
824–894 MHz
0.5°
5°
9.5° T
17.5 17.6 17.5 dBi
25 dB
880–960 MHz
0.5° 5°
9.5° T
17.7 17.9 17.7 dBi
25 dB
68° (half-power)
67° (half-power)
65° (half-power)
7.7° (half-power)
7.5° (half-power)
7.3° (half-power)
0.5°–9.5°
0.5°–9.5°
0.5°–9.5°
0.5°
5°
18 15
9.5° T
15 dB
22 dB (typical)
10 dB
0.5°
18
5°
15
9.5° T
15 dB
23 dB (typical)
10 dB
0.5° 5°
18 16
9.5° T
15 dB
25 dB (typical)
10 dB
12
0o
0o
24
0o
15
21
0o
Mounting E uipment
180o
Vertical pattern
45°- polarization
0.5–9.5° electrical downtilt
100
Specifications
11302-C
936.3981/b
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10516V01
uad Port (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Internal manual or optional remote control
Antenna 1
Antenna 2
824–960
X
60°
824–960
X
60°
0°–10°
0°–10°
0o
824–960 MHz
1.5:1
25 dB
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
4 x 7-16 DIN female
0–10 degrees (continuously adjustable)
50.7 lbs (23 kg)
55.1 lb (25.kg) clamps included
79.7 x 14.7 x 6.7 inches
(2024 x 374 x 169 mm)
at 93 mph (150kph)
205 lbf / 68 lbf / 259 lbf
(910 N) / (300 N) / (1150 N)
H (Heavy)
120 mph (200 kph)
89.6 x 15.4 x 8.76 inches
(2276 x 392 x 222 mm)
270o
0o
21
0o
30
o
0o
0o
21
180o
2.625 inches 0.125
(68 mm 4)
29.1 inches
(738 mm)
50.4 inches
(1280 mm)
79.7 inches
(2024 mm)
6.7 inches
(169 mm)
14.7 inches
(374 mm)
12
Vertical pattern
45°- polarization
0°–10° electrical downtilt
16 dB (typical)
10 dB
28 dB (typical)
7-16
90o
0o
15 dB (typical)
10 dB
25 dB (typical)
7-16
o
60
20
24
0° 5° 10° T
14 15 15 dB
7-16
3
270o
0° 5° 10° T
14 15 15 dB
7-16
0o
30
9.3° (half-power)
824–960
+45°
180o
10
30
9.8° (half-power)
824–960
+45°
0o
Horizontal pattern
45°- polarization
880–960 MHz
15.7 dBi
58° (half-power)
824–960
–45°
12
0o
24
824–894 MHz
15.5 dBi
60° (half-power)
824–960
–45°
90o
0o
Gain at 0° tilt
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for
first sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
Isolation
o
30
15
Specifications
60
20
0o
Mounting category
Wind survival rating
Shipping dimensions
3
15
Wind load
Front/Side/Rear
0o
0o
Dimensions
0o
10
30
33
Frequency range
VSWR
Front-to-back ratio
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Electrical downtilt
Weight
33
General specifications
uad Port Panel Antenna
30
o
65°
Mounting Clamps Included
24.3 inches
(618 mm)
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
Reference the Mechanical Accessories section.
14.5 inches
(368 mm)
11338-A
936.4175
101
800 10517V01
65°
uad Port Panel Antenna
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Internal manual or optional remote control
Antenna 1
Antenna 2
824–960
X
65°
824–960
X
65°
0°–8°
0°–8°
General specifications
0o
o
3
30
33
0o
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
Horizontal pattern
45°- polarization
0o
3
30
o
33
0o
Dimensions
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
180o
0o
15
21
Frequency range
VSWR
Front-to-back ratio
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Electrical downtilt
Weight
Vertical pattern
45°- polarization
0°–8° electrical downtilt
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
Specifications
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for
first sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
Isolation, between ports
2.625 inches 0.125
(68 mm 4)
29.1 inches
(738 mm)
74.3 inches
(1887 mm)
103.6 inches
(2631 mm)
14.5 inches
(368 mm)
Wind load
Front/Side/Rear
824–960 MHz
1.5:1
25 dB
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
4 x 7-16 DIN female
0–8 degrees (continuously adjustable)
61.7 lbs (28 kg)
66.1 lb (30 kg) clamps included
103.6 x 14.7 x 6.7 inches
(2631 x 374 x 169 mm)
at 93 mph (150kph)
273 lbf / 90 lbf / 347 lbf
(1210 N) / (400 N) / (1540 N)
H (Heavy)
120 mph (200 kph)
114 x 15.4 x 8.7 inches
(2896 x 392 x 222 mm)
70.5 lb (32 kg)
36.3 inches
(921 mm)
824–894 MHz
16.5 dBi
66° (half-power)
880–960 MHz
16.7 dBi
61° (half-power)
7.2° (half-power)
6.8° (half-power)
0° 4° 8° T
15 15 15 dB
0° 4° 8° T
15 16 15 dB
16 dB (typical)
8 dB
25 dB
17 dB (typical)
10 dB
28 dB
824–960
+45o
824–960
–45o
824–960
+45o
824–960
–45o
7-16
7-16
7-16
7-16
6.7 inches
(169 mm)
RCU
RCU
–45° –45°
+45° +45°
824–960
824–960
14.7 inches
(374 mm)
Layout of interface
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
Reference the Mechanical Accessories section.
102
11339-A
936.4176
800 10647V01
65°
Mounting Clamps Included
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual or optional remote control
Antenna 2
790–960
X
65°
790–960
X
65°
0°–8°
0°–8°
2.625 inches 0.125
(68 mm 4)
General specifications
Frequency range
VSWR
Front-to-back ratio
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking, avg.
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
790–960 MHz
1.5:1
27 dB (co-polar)
50 ohms
IM3: -150 dBc
+45° and -45°
400 watts per input (at 50°C)
4 x 7-16 DIN female
30 dB
1 dB
2.5°
52.9 lb (24 kg)
57.3 lb (26 kg) clamps included
88.7 x 22.7 x 3.9 inches
(2254 x 576 x 99 mm)
at 93 mph (150kph)
396 lbf / 75 lbf / 459 lbf
(1760 N) / (330 N) / (2040 N)
H (Heavy)
120 mph (200 kph)
98.4 x 23.6 x 5.9 inches
(2500 x 600 x 150 mm)
88.7 inches
(2254 mm)
90 inches
(2286 mm)
91.6 inches
(2326 mm)
22.7 inches
(576 mm)
790–960
–45o
790–960
+45o
790–960
–45o
790–960
+45o
RCU
790–960
3.9 inches
(99 mm)
RCU
790–960
7-16
7-16
7-16
7-16
+45°
–45°
0o
33
–45°
+45°
0o
3
30
o
uad Port (MHz)
Antenna 1
uad Port Panel Antenna
10
30
0o
o
60
20
Layout of interface
30
270o
12
0o
0o
24
0o
15
180o
Horizontal pattern
45°- polarization
0o
3
o
30
o
880–960 MHz
0°
4°
8°
17.3 17.4 17.1
64° (half-power)
8.5° (half-power)
0°–8°
0
33
790–862 MHz
824–894 MHz
tilt
0°
4°
8°
0°
4°
8°
dBi
16.9 17.1 17
17 17.2 17.1
Horizontal beamwidth
66° (half-power)
65° (half-power)
Vertical beamwidth
9.1° (half-power)
9° (half-power)
Electrical downtilt
0°–8°
0°–8°
continuously adjustable
(manual or optional remote control)
Sidelobe suppression for first
0° 3° 6° 8° T
0° 3° 6° 8° T
sidelobe above main beam, avg. 18 18 16 15 dB
18 18 16 15 dB
Cross polar ratio
Main direction
0°
25 dB (typical)
25 dB (typical)
Sector
60°
10 dB
10 dB
Average gain
21
0o
Specifications
90o
10
0° 3° 6° 8° T
18 18 16 15 dB
30
0o
o
60
20
30
25 dB (typical)
10 dB
270o
90o
12
0o
0o
21
0
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–9 degrees downtilt angle.
Reference the Mechanical Accessories section.
180o
o
Mounting E uipment
0
15
o
24
Vertical pattern
45°- polarization
0°–8° electrical downtilt
11342-B
936.3989/b
103
NEW
840 10535
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
698–894
X
65°
0°
Specifications
Frequency range
Gain
0°
3
30
°
33
0°
10
30
0°
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Front-to-back ratio
Maximum input power
45° polarization
horizontal beamwidth
45° polarization
vertical beamwidth
Connector
Isolation
Cross polar ratio
Main direction
0°
Sector
60°
Weight
Dimensions
°
60
20
30
270°
90°
12
0°
0°
24
0°
21
0°
15
180°
Horizontal pattern
45°- polarization
3
30
°
0°
33
0°
10
30
0°
°
60
20
30
270°
90°
12
0°
0°
24
0°
0°
21
Wind load
Front/Side/Rear
15
180°
Vertical pattern
45°- polarization
Wind survival rating
Shipping dimensions
Shipping weight
698–894 MHz
2 x 8.5 dBi (698–806 MHz)
2 x 9 dBi (806–894 MHz)
50 ohms
1.5:1
IM3: -150dBc
+45° and -45°
27 dB (co-polar)
350 watts (at 50°C) per input
70 degrees (half-power) (698–806 MHz)
68 degrees (half-power) (806–894 MHz)
70 degrees (half-power) (698–806 MHz)
68 degrees (half-power) (806–894 MHz)
2 x 7-16 DIN female
30 dB
30 dB (typical)
8 dB
6.6 lb (3 kg)
13.1 x 10.6 x 6.2 inches
(332 x 270 x 157 mm)
at 93 mph (150kph)
9 lbf / 6 lbf / 21 lbf
(40 N) / (25 N) / (90 N)
120 mph (200 kph)
14.8 x 11.3 x 6.5 inches
(377 x 287 x 165 mm)
9.9 lb (4.5 kg)
2.5 inches
(64 mm)
13.1 inches
(332 mm)
6.2 inches
(157 mm)
Mounting E uipment
10.6 inches
(270 mm)
104
11420-A
Model
2 x 131 1847
Description
Mounting Kit for 1.8 to 4.9 inch
(45 to 125 mm) OD mast.
Reference the Mechanical Accessories section.
739 619V01
65° Single Band Panel Antenna
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
790–960
X
65°
0°
Specifications
Frequency range
Gain
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Front-to-back ratio
Maximum input power
45° polarization
horizontal beamwidth
45° polarization
vertical beamwidth
Connector
Isolation
Cross polar ratio
Main direction
0°
Sector
60°
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
790–960 MHz
2 x 8.5 dBi (790–880 MHz)
2 x 9 dBi (880–960 MHz)
50 ohms
1.7:1 (790–880 MHz)
1.5:1 (880–960 MHz)
IM3: -150dBc
+45° and -45°
27 dB (co-polar)
350 watts (at 50°C) per input
70 degrees (half-power) (790–880 MHz)
65 degrees (half-power) (880–960 MHz)
70 degrees (half-power) (790–880 MHz)
68 degrees (half-power) (880–960 MHz)
2 x 7-16 DIN female
30 dB
25 dB (typical)
10 dB
6.6 lb (3 kg)
10.1 x 10.3 x 4.6 inches
(256 x 262 x 116 mm)
at 93 mph (150kph)
9 lbf / 6 lbf / 21 lbf
(40 N) / (25 N) / (90 N)
M (Medium)
120 mph (200 kph)
14.8 x 11.3 x 6.5 inches
(377 x 287 x 165 mm)
Profile PA1
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
2.625 inches 0.125
(68 mm 4)
10.1 inches
(256 mm)
12.2 inches
(310 mm)
13.8 inches
(350 mm)
4.6 inches
(116 mm)
Mounting E uipment
10.3 inches
(262 mm)
Model
Description
2 x 738 546
Mounting Kit for 2 to 4.6 inch
(optional)
(50 to 115 mm) OD mast.
Reference the Mechanical Accessories section.
11435-A
936.4515
105
739 620V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtlt
806–960
X
65°
0°
Specifications
Frequency range
Gain
Horizontal pattern
45°- polarization
Profile PA1
Vertical pattern
45°- polarization
Impedance
VSWR
Intermodulation (2x20w)
Front-to-back ratio
Maximum input power
Polarization
45° polarization
horizontal beamwidth
45° polarization
vertical beamwidth
Connector
Isolation
Weight
Dimensions
Wind load
Front/Side/Rear
2.625 inches 0.125
(68 mm 4)
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
806–960 MHz
2 x 12 dBi (806–880 MHz)
2 x 12.5 dBi (880–960 MHz)
50 ohms
1.5:1
IM3: -150dBc
30 dB (co-polar)
500 watts (at 50°C) per input
+45° and -45°
68 degrees (half-power) (806–880 MHz)
65 degrees (half-power) (880–960 MHz)
29 degrees (half-power) (806–880 MHz)
27 degrees (half-power) (880–960 MHz)
2 x 7-16 DIN female
30 dB
13.2 lb (6 kg)
17.6 lb (8 kg) clamps included
25.8 x 10.3 x 4.6 inches
(656 x 262 x 116 mm)
at 93 mph (150kph)
50 lbf / 20 lbf / 68 lbf
(220 N) / (85 N) / (300 N)
M (Medium)
120 mph (200 kph)
32.1 x 11.1 x 6 inches
(816 x 282 x 152 mm)
25.4 lb (11.5 kg)
29.5 inches
(750 mm)
28 inches
(710 mm)
25.8 inches
(656 mm)
4.6 inches
(116 mm)
10.3 inches
(262 mm)
106
11436-A
936.4459
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–30 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10207V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
790–960
X
65°
6°
General specifications
2.625 inches 0.125
(68 mm 4)
790–960 MHz
30 dB (co-polar)
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
6 degrees
30 dB
16.5 lb (7.5 kg)
20.9 lb (9.5 kg) clamps included
50.9 x 10.2 x 3.9 inches
(1294 x 259 x 99 mm)
at 93 mph (150kph)
178 lbf / 84 lbf / 246 lbf
(790 N) / (370 N) / (1090 N)
M (Medium)
120 mph (200 kph)
60.1 x 10.7 x 5 inches
(1526 x 272 x 127 mm)
29.1 lb (13.2 kg)
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
790–960
–45o
7-16
50.9 inches
(1294 mm)
52.1 inches
(1324 mm)
53.7 inches
(1364 mm)
790–960
+45o
3.9 inches
(99 mm)
Profile PC2
10.2 inches
(259 mm)
7-16
0o
33
0o
3
30
o
Frequency range
Front-to-back ratio
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Electrical downtilt
Isolation
Weight
10
15.7° (half-power)
14.6° (half-power)
13 dB
13 dB
14 dB
14 dB
o
60
20
30
270o
90o
12
0o
0o
24
180o
Horizontal pattern
45°- polarization
16 dB
14 dB
0o
3
30
o
16° (half-power)
0o
o
880–960 MHz
15 dBi
1.3:1
63° (half-power)
0
15
824–894 MHz
14.7 dBi
1.3:1
65° (half-power)
0o
33
Gain
VSWR
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for
first sidelobe above horizon
sector 0°–30° above horizon
Cross polar ratio
Main direction
0°
Sector
60°
790–862 MHz
14.5 dBi
1.4:1
66° (half-power)
21
0o
Specifications
30
10
20 dB (typical)
10 dB
20 dB (typical)
10 dB
20 dB (typical)
10 dB
30
0o
o
60
20
30
270o
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
0o
180o
0o
15
Model
2 x 738 546
12
0o
24
21
0o
Mounting E uipment
90o
Vertical pattern
45°- polarization
6° electrical downtilt
11294-B
936.3779/a
107
800 10202V02
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
2.625 inches 0.125
(68 mm 4)
50.9 inches
(1294 mm)
52.1 inches
(1324 mm)
53.7 inches
(1364 mm)
790–960
X
65°
0°
General specifications
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
3.9 inches
(99 mm)
Profile PC2
790–960 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
0.5 dB
2°
14.3 lb (6.5 kg)
18.7 lb (8.5 kg) clamps included
50.9 x 10.2 x 3.9 inches
(1294 x 259 x 99 mm)
at 93 mph (150kph)
97 lbf / 45 lbf / 135 lbf
(430 N) / (200 N) / (600 N)
M (Medium)
120 mph (200 kph)
60.1 x 10.7 x 5 inches
(1526 x 272 x 127 mm)
19.8 lb (9 kg)
790–960
–45o
790–960
+45o
7-16
7-16
10.2 inches
(259 mm)
0o
3
30
o
33
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
o
180o
0
15
21
0o
24
Horizontal pattern
45°- polarization
3
30
o
0o
33
0o
10
30
0o
o
60
20
30
270o
90o
790–862 MHz
Gain
14.5 dBi
Front-to-back ratio (180° 30°) 23 dB
+45° and -45° polarization
69° (half-power)
horizontal beamwidth
+45° and -45° polarization
14.7° (half-power)
vertical beamwidth
Sidelobe suppression for
first sidelobe above horizon
14 dB
Cross polar ratio
Main direction
0°
20 dB
Sector
60°
11 dB
824–894 MHz
14.7 dBi
24 dB
68° (half-power)
880–960 MHz
15 dBi
25 dB
65° (half-power)
14.3° (half-power)
13.2° (half-power)
15 dB
14 dB
20 dB
11 dB
20 dB
11 dB
12
0o
0o
180o
0o
15
21
0o
24
Vertical pattern
45°- polarization
108
Specifications
11364-B
936.3908/b
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10294V02
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
790–960
X
65°
6°
2.625 inches 0.125
(68 mm 4)
General specifications
Frequency range
Front-to-back ratio
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking, average
Squint
Weight
790–960 MHz
25 dB (180° 30°)
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
1 dB
1.5°
20.9 lb (9.5 kg)
25.4 lb (11.5 kg) clamps included
76.1 x 10.2 x 3.9 inches
(1934 x 259 x 99 mm)
at 93 mph (150kph)
156 lbf / 70 lbf / 205 lbf
(690 N) / (310 N) / (910 N)
M (Medium)
120 mph (200 kph)
81.3 x 10.7 x 5.8 inches
(2066 x 272 x 147 mm)
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
76.1 inches
(1934 mm)
77.3 inches
(1964 mm)
78.9 inches
(2004 mm)
3.9 inches
(99 mm)
Profile PC2
790–960
+45o
790–960
–45o
10.2 inches
(259 mm)
7-16
0o
3
o
33
0o
30
7-16
10
824–894 MHz
16.5 dBi
1.4:1
68° (half-power)
880–960 MHz
16.9 dBi
1.3:1
65° (half-power)
9.4° (half-power)
9.3° (half-power)
8.8° (half-power)
6°
6°
6°
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
15 dB
20 dB
10 dB
20 dB
10 dB
20 dB
10 dB
0o
3
30
o
15 dB
0o
15
14 dB
180o
Horizontal pattern
45°- polarization
0o
33
Gain
VSWR
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
Sidelobe suppression for
first sidelobe above horizon
Cross polar ratio
Main direction
0°
Sector
60°
790–862 MHz
16.2 dBi
1.5:1
69° (half-power)
21
0o
Specifications
10
30
0o
o
60
20
30
270o
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
0o
180o
0o
15
Model
2 x 738 546
12
0o
24
21
0o
Mounting E uipment
90o
Vertical pattern
45°- polarization
6° electrical downtilt
11367-B
936.3909/b
109
800 10203V02
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
790–960
X
65°
0°
2.625 inches 0.125
(68 mm 4)
General specifications
76.1 inches
(1934 mm)
77.3 inches
(1964 mm)
78.9 inches
(2004 mm)
Frequency range
Front-to-back ratio
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking
Squint
Weight
790–960 MHz
25 dB (180° 30°)
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
0.5 dB
2°
20.9 lb (9.5 kg)
24.9 lb (11.3 kg) clamps included
76.1 x 10.2 x 3.9 inches
(1934 x 259 x 99 mm)
at 93 mph (150kph)
156 lbf / 70 lbf / 205 lbf
(690 N) / (310 N) / (910 N)
M (Medium)
120 mph (200 kph)
81.3 x 11.5 x 7.6 inches
(2066 x 292 x 192 mm)
29.3 lb (13.3 kg)
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
3.9 inches
(99 mm)
Profile PC2
790–960
–45o
790–960
+45o
7-16
7-16
10.2 inches
(259 mm)
3
30
o
0o
33
0o
10
30
0o
60
20
o
Specifications
30
270o
90o
12
0o
0o
180o
0o
15
21
0o
24
Horizontal pattern
45°- polarization
30
o
3
o
0
33
0o
10
30
0o
60
20
o
30
270o
790–862 MHz
16.4 dBi
1.5:1
69° (half-power)
824–894 MHz
16.6 dBi
1.5:1
67° (half-power)
880–960 MHz
16.9 dBi
1.4:1
65° (half-power)
9.9° (half-power)
9.5° (half-power)
8.9° (half-power)
13 dB
15 dB
15 dB
22 dB
18 dB
14 dB
22 dB
18 dB
14 dB
22 dB
18 dB
14 dB
90o
12
0o
0o
o
180o
0
15
21
0o
24
Vertical pattern
45°- polarization
110
Gain
VSWR
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for
first sidelobe above horizon
Cross polar ratio
Main direction
0°
Sector
30°
Sector
60°
11365-A
936.3804/c
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10204V02
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
790–960
X
65°
0°
2.625 inches 0.125
(68 mm 4)
General specifications
Frequency range
Front-to-back ratio
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Mounting
790–960 MHz
25 dB (180° 30°)
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
1 dB
2°
24.3 lb (11 kg)
28.7 lb (13 kg) clamps included
88.7 x 10.2 x 3.9 inches
(2254 x 259 x 99 mm)
at 93 mph (150kph)
178 lbf / 84 lbf / 246 lbf
(790 N) / (370 N) / (1090 N)
M (Medium)
120 mph (200 kph)
93.9 x 10.7 x 5.8 inches
(2386 x 272 x 147 mm)
Fixed mounts for 2 to 4.6 inch (50 to
115 mm) OD masts are included and
tilt options are available.
88.7 inches
(2254 mm)
89.9 inches
(2284 mm)
91.5 inches
(2324 mm)
3.9 inches
(99 mm)
7-16
0o
3
30
o
7-16
Profile PC2
10.2 inches
(259 mm)
0o
790–960
+45o
33
790–960
–45o
10
30
0o
8.3° (half-power)
7.8° (half-power)
90o
12
0o
0o
24
13 dB
14 dB
15 dB
25 dB
14 dB
25 dB
14 dB
25 dB
14 dB
180o
Horizontal pattern
45°- polarization
0o
3
o
8.5° (half-power)
30
270o
30
880–960 MHz
17.8 dBi
1.4:1
65° (half-power)
o
824–894 MHz
17.5 dBi
1.4:1
67° (half-power)
o
0
15
790–862 MHz
17.2 dBi
1.5:1
69° (half-power)
0o
33
Gain
VSWR
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for
first sidelobe above horizon
Cross polar ratio
Main direction
0°
Sector
60°
21
0o
Specifications
60
20
10
30
0o
60
20
o
30
270o
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–9 degrees downtilt angle.
Reference the Mechanical Accessories section.
0o
180o
0o
15
Model
2 x 738 546
12
0o
24
21
0o
Mounting E uipment
90o
Vertical pattern
45°- polarization
11366-B
936.3812/c
111
800 10215V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
2.625 inches 0.125
(68 mm 4)
101.3 inches
(2574 mm)
102.5 inches
(2604 mm)
104.1 inches
(2644 mm)
790–960
X
65°
0°
General specifications
Frequency range
VSWR
Front-to-back ratio
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Null fill
Tracking, average
Squint
Weight
790–960 MHz
1.5:1
25 dB (180° 30°)
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
-25 dB typical
0.5 dB
2°
26.5 lb (12 kg)
30.9 lb (14 kg) clamps included
101.3 x 10.2 x 3.9 inches
(2574 x 259 x 99 mm)
at 93 mph (150kph)
212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)
H (Heavy)
120 mph (200 kph)
106.5 x 10.7 x 5.8 inches
(2706 x 272 x 147 mm)
Dimensions
3.9 inches
(99 mm)
10.2 inches
(259 mm)
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Profile PC2
3
790–960
–45o
790–960
+45o
7-16
7-16
30
o
0o
33
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
21
o
180o
0
15
0o
24
Horizontal pattern
45°- polarization
o
3
30
0o
33
0o
10
30
0o
o
60
20
30
270o
90o
Specifications
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for first
sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
790–866 MHz
17.7 dBi
69° (half-power)
824–894 MHz
17.9 dBi
67° (half-power)
880–960 MHz
18 dBi
65° (half-power)
7.4° (half-power)
7.2° (half-power)
6.8° (half-power)
14 dB
15 dB
15 dB
25 dB
12 dB
25 dB
12 dB
25 dB
12 dB
12
0o
0o
24
0
15
o
21
0o
Mounting E uipment
180o
Vertical pattern
45°- polarization
Model
2 x 738 546
850 10008
(optional)
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
Tilt Mount Kit
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
112
11297-B
936.3980/b
800 10208V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
790–960
X
65°
6°
2.625 inches 0.125
(68 mm 4)
General specifications
Frequency range
VSWR
Front-to-back ratio
(180° 30)
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Electrical downtilt
Null fill
Tracking
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
790–960 MHz
1.4:1
25 dB
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
6 degrees
-25 dB (typical)
0.5 dB
2.5°
26.5 lb (12 kg)
30.9 lb (14 kg) clamps included
101.3 x 10.2 x 3.9 inches
(2574 x 259 x 99 mm)
at 93 mph (150kph)
212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)
H (Heavy)
120 mph (200 kph)
106.5 x 10.7 x 5.8 inches
(2706 x 272 x 147 mm)
101.3 inches
(2574 mm)
102.5 inches
(2604 mm)
104.1 inches
(2644 mm)
3.9 inches
(99 mm)
Profile PC2
0o
0o
30
o
790–960
+45o
33
790–960
–45o
10.2 inches
(259 mm)
3
10
30
0o
270o
824–894 MHz
17.9 dBi
67° (half-power)
880–960 MHz
18 dBi
65° (half-power)
7.4° (half-power)
7.2° (half-power)
6.8° (half-power)
12
0o
0o
24
180o
Horizontal pattern
45°- polarization
0o
3
o
16 dB
17 dB
17 dB
10
30
0o
25 dB
10 dB
25 dB
10 dB
25 dB
10 dB
0o
15
790–866 MHz
17.7 dBi
69° (half-power)
90o
0
33
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for
first sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
7-16
30
o
Specifications
60
20
270o
90o
12
0o
0o
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
21
0o
180o
0o
15
Model
2 x 738 546
o
30
24
Mounting E uipment
o
30
21
0o
7-16
60
20
Vertical pattern
45°- polarization
6° electrical downtilt
11295-B
936.3978/b
113
800 10217V01
85° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
790–960
X
85°
0°
Dual Polarization
HPBW
Electrical Downtilt
2.625 inches 0.125
(68 mm 4)
General specifications
101.3 inches
(2574 mm)
102.5 inches
(2604 mm)
104.1 inches
(2644 mm)
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking, average
Squint
Weight
790–960 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
1 dB
4.5°
26.5 lb (12 kg)
30.9 lb (14 kg) clamps included
101.3 x 10.2 x 3.9 inches
(2574 x 259 x 99 mm)
at 93 mph (150kph)
212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)
H (Heavy)
120 mph (200 kph)
106.5 x 10.7 x 5.8 inches
(2706 x 272 x 147 mm)
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
3.9 inches
(99 mm)
Profile PC2
790–960
–45o
790–960
+45o
7-16
7-16
10.2 inches
(259 mm)
3
30
o
0o
33
0o
10
30
0o
o
60
20
Specifications
30
270o
90o
12
0o
0o
21
180o
0o
15
0o
24
Horizontal pattern
45°- polarization
3
30
o
0o
33
0o
10
30
0o
60
20
o
30
270o
790–862 MHz
16.6 dBi
86° (half-power)
824–894 MHz
16.7 dBi
85° (half-power)
880–960 MHz
16.8 dBi
83° (half-power)
7.5° (half-power)
7.3° (half-power)
7° (half-power)
25 dB
23 dB
25 dB
24 dB
25 dB
24 dB
16 dB
17 dB
16 dB
20 dB (typical)
15 dB
20 dB (typical)
15 dB
20 dB (typical)
13 dB
90o
12
0o
0o
180o
0o
15
21
0o
24
Vertical pattern
45°- polarization
114
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Front-to-back ratio (180° 0°)
(180° 30°)
Sidelobe suppression for
first sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
11322-B
936.3999/b
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10308V01
85° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
790–960
X
85°
0°–14°
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking, average
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
790–960 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
0.5 dB
1.5°
19.8 lb (9 kg)
23.8 lb (11 kg) clamps included
50.9 x 10.2 x 3.9 inches
(1294 x 259 x 99 mm)
at 93 mph (150kph)
97 lbf / 45 lbf / 133 lbf
(430 N) / (200 N) / (590 N)
M (Medium)
120 mph (200 kph)
62.4 x 11.5 x 5.4 inches
(1586 x 292 x 138 mm)
790–960
–45o
790–960
+45o
7-16
7-16
2.625 inches 0.125
(68 mm 4)
50.9 inches
(1294 mm)
52.1 inches
(1324 mm)
53.7 inches
(1364 mm)
3.9 inches
(99 mm)
10.2 inches
(259 mm)
Profile PC2
3
30
o
0o
33
0o
10
20 dB (typical)
10 dB
20 dB (typical)
10 dB
270o
90o
12
0o
0o
24
180o
Horizontal pattern
45°- polarization
30
3
o
0o
10
30
60
20
270o
90o
12
0o
0o
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
21
0o
180o
0o
15
Model
2 x 738 546
o
30
24
Mounting E uipment
o
30
0o
20 dB (typical)
10 dB
60
20
0o
15
0° 7° 14° T
17 16 16 dB
0o
0o
33
tilt
dBi
Front-to-back ratio (180° 0°)
(180° 30°)
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
880–960 MHz
0°
7° 14°
13.4 13.5 13.4
26 dB
24 dB
83° (half-power)
15° (half-power)
0°–14°
0o
Average gain
790–862 MHz
824–894 MHz
0°
7° 14°
0°
7°
14°
13.2 13.3 13.2
13.3 13.4 13.3
24 dB
24 dB
20 dB
22 dB
86° (half-power)
85° (half-power)
16° (half-power)
15.5° (half-power)
0°–14°
0°–14°
(manual or optional remote control)
0° 7° 14° T
0° 7° 14° T
17 16 15 dB
17 17 16 dB
21
Specifications
30
Vertical pattern
45°- polarization
0°–14° electrical downtilt
11330-B
936.3998/a
115
800 10309V01
85° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
790–960
X
85°
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
0°–10°
General specifications
2.625 inches 0.125
(68 mm 4)
76.1 inches
(1934 mm)
77.3 inches
(1964 mm)
78.9 inches
(2004 mm)
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking
Squint
Weight
790–960 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
400 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
0.5 dB
3.0°
25.4 lb (11.5 kg)
29.8 lb (13.5 kg) clamps included
76.1 x 10.2 x 3.9 inches
(1934 x 259 x 99 mm)
at 93 mph (150kph)
153 lbf / 70 lbf / 203 lbf
(680 N) / (310 N) / (900 N)
M (Medium)
120 mph (200 kph)
87.2 x 11.5 x 5.8 inches
(2216 x 292 x 147 mm)
Dimensions
Wind load
Front/Side/Rear
3.9 inches
(99 mm)
Mounting category
Wind survival rating
Shipping dimensions
10.2 inches
(259 mm)
790–960
–45o
790–960
+45o
7-16
7-16
Profile PC2
o
30
3
0o
33
0o
10
30
0o
Specifications
o
60
20
Average gain
30
270o
90o
12
0o
0o
180o
0o
15
21
0o
24
Horizontal pattern
45°- polarization
3
30
o
0o
33
0o
10
30
0o
o
60
20
30
270o
90o
790–862 MHz
824–894 MHz
0°
5° 10°
0°
5°
10°
14.8 15 14.6
14.9 15.1 14.7
24 dB
25 dB
21 dB
21 dB
85° (half-power)
85° (half-power)
10.1° (half-power)
9.8° (half-power)
0°–10°
0°–10°
(manual or optional remote control)
0° 5° 10° T
0° 5° 10° T
15 15 14 dB
15 15 15 dB
19 19 19 dB
20 20 20 dB
880–960 MHz
0°
5° 10°
14.8 15.2 15
26 dB
21 dB
83° (half-power)
9.6° (half-power)
0°–10°
23 dB (typical)
10 dB
22 dB (typical)
10 dB
22 dB (typical)
10 dB
0° 5° 10° T
18 18 18 dB
22 22 22 dB
12
0o
0o
180o
0o
15
21
0o
24
Vertical pattern
45°- polarization
0°–10° electrical downtilt
116
tilt
dBi
Front-to-back ratio (180° 0°)
(180° 30°)
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for:
First sidelobe above main beam
Average
Cross polar ratio
Main direction
0°
Sector
60°
11260-B
936.3918/c
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10310V01
85° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
790–960
X
85°
Adj. Electrical Downtilt
0.5°–9.5°
Dual Polarization
Manual, or optional remote control
General specifications
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
2.625 inches 0.125
(68 mm 4)
790–960 MHz
1.5:1
50 ohms
IM3: -153 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
0.5 dB
3.5°
30.9 lb (14 kg)
35.3 lb (16 kg) clamps included
101.3 x 10.2 x 3.9 inches
(2574 x 259 x 99 mm)
at 93 mph (150kph)
214 lbf / 95 lbf / 286 lbf
(950 N) / (420 N) / (1270 N)
H (Heavy)
120 mph (200 kph)
113.2 x 10.7 x 5 inches
(2876 x 272 x 127 mm)
790–960
–45o
790–960
+45o
7-16
7-16
101.3 inches
(2574 mm)
102.5 inches
(2604 mm)
105.3 inches
(2674 mm)
3.9 inches
(99 mm)
10.2 inches
(259 mm)
Profile PC2
0o
33
0o
3
30
o
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking, average
Squint
Weight
10
30
0o
30
270o
90o
12
0o
0o
24
18
17
16 dB
0o
14 dB
15
14
180o
Horizontal pattern
45°- polarization
0.5° 5° 9.5°
3
o
0o
10
30
18
o
60
20
0o
33
tilt
dBi
Front-to-back ratio (180° 0°)
(180° 30°)
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for:
T
First sidelobe above main beam
Cross polar ratio
Main direction
0°
880–960 MHz
0.5° 5° 9.5°
16.2 16.2 16.2
26 dB
24 dB
83° (half-power)
7.6° (half-power)
0.5°–9.5°
30
Average gain
790–862 MHz
824–894 MHz
0.5° 5° 9.5°
0.5° 5° 9.5°
15.8 15.6 15.4
16 15.9 15.8
24 dB
24 dB
20 dB
22 dB
86° (half-power)
85° (half-power)
8.1° (half-power)
7.9° (half-power)
0.5°–9.5°
0.5°–9.5°
(manual or optional remote control)
0.5° 5° 9.5° T
0.5° 5° 9.5° T
21
0o
Specifications
0o
17 16 16 dB
o
60
20
30
20 dB (typical)
20 dB (typical)
20 dB (typical)
270o
90o
12
0o
0o
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
180o
0o
Mounting E uipment
15
21
0o
24
Vertical pattern
45°- polarization
0.5°–9.5° electrical downtilt
11311-B
936.3996/b
117
800 10300V01
85° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
790–960
X
85°
Adj. Electrical Downtilt
0.5°–9.5°
Dual Polarization
Manual, or optional remote control
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Tracking, average
Squint
Weight
2.625 inches 0.125
(68 mm 4)
101.3 inches
(2574 mm)
102.5 inches
(2604 mm)
104.1 inches
(2644 mm)
Dimensions
Wind load
Front/Side/Rear
3.9 inches
(99 mm)
Mounting category
Wind survival rating
Shipping dimensions
10.2 inches
(259 mm)
790–960
–45o
790–960
+45o
7-16
7-16
Profile PC2
o
3
30
0o
33
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
21
180o
0o
15
0o
24
Horizontal pattern
45°- polarization
3
30
o
0o
33
0o
10
30
0o
o
60
20
30
270o
Specifications
Average gain
tilt
dBi
Front-to-back ratio (180° 0°)
(180° 30°)
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
T
first sidelobe above main beam
Cross polar ratio
Main direction
0°
790–862 MHz
824–894 MHz
0.5° 5° 9.5°
0.5° 5° 9.5°
16.2 16.2 15.8
16.3 16.3 16.1
24 dB
25 dB
21 dB
23 dB
85° (half-power)
85° (half-power)
8° (half-power)
7.8° (half-power)
0.5°–9.5°
0.5°–9.5°
(manual or optional remote control)
0.5° 5° 9.5° T
0.5° 5° 9.5° T
880–960 MHz
0.5° 5° 9.5°
16.5 16.6 16.5
26 dB
24 dB
83° (half-power)
7.6° (half-power)
0.5°–9.5°
18
18 16 15 dB
15
14 dB
20 dB (typical)
18
17
16 dB
20 dB (typical)
0.5° 5° 9.5°
20 dB (typical)
90o
12
0o
0o
180o
0o
15
21
0o
24
Vertical pattern
45°- polarization
0.5°–9.5° electrical downtilt
118
790–960 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
500 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
0.5 dB
3.5°
30.9 lb (14 kg)
35.3 lb (16 kg) clamps included
101.3 x 10.2 x 3.9 inches
(2574 x 259 x 99 mm)
at 93 mph (150kph)
212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)
H (Heavy)
120 mph (200 kph)
112.4 x 10.7 x 5.8 inches
(2855 x 272 x 147 mm)
11329-B
936.3995/b
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
NEW
800 10816
90°
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 1
790–960
X
90°
790–960
X
90°
0°–10°
0°–10°
2.625 inches 0.125
(68 mm 4)
General specifications
790–960 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
400 watts per input (at 50°C)
4 x 7-16 DIN female
25 dB ( 27 dB typical)
37.5 lb (17 kg)
41.9 lb (19 kg) clamps included
76.1 x 14.7 x 4.2 inches
(1934 x 374 x 106 mm)
at 93 mph (150kph)
205 lbf / 86 lbf / 259 lbf
(910 N) / (380 N) / (1150 N)
H (Heavy)
120 mph (200 kph)
87.2 x 15.4 x 8.7 inches
(2216 x 392 x 222 mm)
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
30
°
0°
°
60
20
30
0°
90°
0°
270°
0°
0°
21
0°
15
0°
180°
Vertical pattern
45°- polarization
0°–8° electrical downtilt
Specifications
Average gain
12
0°
24
15
Horizontal pattern
45°- polarization
90°
tilt
dBi
Front-to-back ratio (180° 0°)
(180° 30)
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
Ti lt
Ti lt
4.8 inches
(106 mm)
7
14.7 inches
(374 mm)
790–862 MHz
824–894 MHz
0°
5° 10°
0°
5°
10°
14.5 14.5 14.3
14.6 14.8 14.5
24 dB
24 dB
20 dB
21 dB
93° (half-power)
90° (half-power)
10.5° (half-power)
10.2° (half-power)
0°–10°
0°–10°
(manual or optional remote control)
0° 5° 10° T
0°
5° 10° T
18 15
14 dB
18
17
16 dB
0°
18
20 dB (typical)
10 dB
18 dB (typical)
10 dB
Mounting E uipment
Model
2 x 738 546
0
0
–96
90
12
0°
24
0°
°
60
30
270°
21
3
20
30
180°
0°
96
0°
76.1 inches
(1934 mm)
10
10
30
77.3 inches
(1964 mm)
79 0–
0°
3
33
33
0°
83.7 inches
(2707 mm)
30
°
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Weight
uad Port Panel Antenna
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
20 dB (typical)
10 dB
880–960 MHz
0°
5° 10°
14.8 15 14.8
25 dB
22 dB
87° (half-power)
10° (half-power)
0°–10°
5°
16
10° T
15 dB
790–960
–45o
790–960
–45o
790–960
+45o
790–960
+45o
7-16
7-16
7-16
7-16
11320-A
936.4524
119
NEW
800 10817
90°
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 1
790–960
X
90°
790–960
X
90°
0°–8°
0°–8°
Adj. Electrical Downtilt
Manual, or optional remote control
2.625 inches 0.125
(68 mm 4)
uad Port Panel Antenna
General specifications
105 inches
(2668 mm)
Dimensions
Wind load
Front/Side/Rear
103.6 inches
(2631 mm)
Mounting category
Wind survival rating
Shipping dimensions
3
0°
30
°
33
0°
33
0°
0°
30
°
60
20
0°
30
270°
90°
0°
21
0°
790–960
–45o
790–960
+45o
790–960
+45o
7-16
7-16
7-16
7-16
0°
790–960
–45o
20 dB (typical)
10 dB
180°
Vertical pattern
45°- polarization
0°–8° electrical downtilt
790–862 MHz
824–894 MHz
0°
4°
8°
0°
4°
8°
15.4 15.4 15
15.7 15.7 15.4
24 dB
24 dB
20 dB
21 dB
93° (half-power)
90° (half-power)
7.4° (half-power)
7.2° (half-power)
0°–8°
0°–8°
(manual or optional remote control)
0° 4°
8° T
0°
4°
8° T
17 17
15 dB
17
17
15 dB
20 dB (typical)
10 dB
0°
15
tilt
dBi
Front-to-back ratio (180° 0°)
(180° 30)
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
12
0°
24
0°
Average gain
90°
15
21
7
0
180°
Horizontal pattern
45°- polarization
Specifications
11321-C
936.4322/a
0°
4.8 inches
(106 mm)
14.7 inches
(374 mm)
120
270°
12
0°
24
0 Tilt
–96
90
°
60
20
30
Tilt 790–
96
3
10
10
30
0°
30
°
106.6 inches
(2707 mm)
790–960 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
400 watts per input (at 50°C)
4 x 7-16 DIN female
27 dB
27 dB
50.7 lb (23 kg)
55.1 lb (25 kg) clamps included
103.6 x 14.7 x 4.2 inches
(2631 x 374 x 106 mm)
at 93 mph (150kph)
286 lbf / 90 lbf / 385 lbf
(1270 N) / (400 N) / (1710 N)
H (Heavy)
120 mph (200 kph)
120.3 x 15.3 x 5.2 inches
(3055 x 388 x 133 mm)
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
intrasystem
intersystem
Weight
880–960 MHz
0°
4°
8°
16 16.1 15.9
25 dB
22 dB
87° (half-power)
6.9° (half-power)
0°–8°
0°
17
4°
17
8° T
15 dB
18 dB (typical)
10 dB
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10008
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
1710 to 2690 MHz Antennas
1710 – 2200 MHz
•
XX Polarization
•
Adjustable Electrical Downtilt
Horizontal
Beamwidth
Frequency
Gain
Model
Electrical
Downtilt
Polarization
Height
40°
1710–2200 MHz
17 dBi
800 10605
2°– 14° ADT*
2 x +45° and -45°
27.5 inches
127
45°
1710–2200 MHz
19.3 dBi
800 10606V01
0°– 10° ADT*
2 x +45° and -45°
51.7 inches
129
65°
1710–2200 MHz
17.6 dBi
800 10510V01
0°– 15° ADT*
2 x +45° and -45°
54.7 inches
143
1710–2170 MHz
17.7 dBi
742 237
0°– 8° ADT*
2 x +45° and -45°
45.2 inches
148
1710–2200 MHz
17.8 dBi
742 236V01
0°– 10° ADT*
2 x +45° and -45°
51.9 inches
149
1710–2170 MHz
19.2 dBi
742 235V01
0°–6° ADT*
2 x +45° and -45°
77.1 inches
150
1710–2180 MHz
16.2 dBi
742 352V01
0°–10° ADT*
2 x +45° and -45°
51.9 inches
151
90°
1710 – 2200 MHz
•
X Polarization
•
Page
Adjustable / Fixed Electrical Downtilt
Horizontal
Beamwidth
Frequency
Gain
Model
Electrical
Downtilt
Polarization
Height
30°
1710–2170 MHz
20.5 dBi
742 351V01
0°– 8° ADT*
+45° and -45°
51.3 inches
123
45°
1710–2170 MHz
19.5 dBi
742 218V01
0°– 8° ADT*
+45° and -45°
51.4 inches
125
1710–2180 MHz
20.9 dBi
742 219V01
0°– 6° ADT*
+45° and -45°
76.6 inches
126
1710–2170 MHz
9.2 dBi
800 10711
0°
+45° and -45°
6.1 inches
152
1710–2170 MHz
11.5 dBi
800 10761
3°
+45° and -45°
10.9 inches
153
1710–2170 MHz
12 dBi
739 489V01
2°
+45° and -45°
13.5 inches
149
1710–2200 MHz
15.6 dBi
800 10247V01
0°– 12° ADT*
+45° and -45°
28.9 inches
135
1710–2170 MHz
15.6 dBi
742 196V01
0°
+45° and -45°
28.9 inches
154
1710–2200 MHz
17.6 dBi
800 10504V01
0°– 15° ADT*
+45° and -45°
54.6 inches
139
1710–2170 MHz
17.7 dBi
742 214V01
0°– 8° ADT*
+45° and -45°
45 inches
137
1710–2200 MHz
17.9 dBi
742 215V01
0°– 10° ADT*
+45° and -45°
51.7 inches
138
1710–2200 MHz
18.1 dBi
800 10425V01
0°
+45° and -45°
51.3 inches
155
1710–2200 MHz
19.2 dBi
742 213V01
0°– 6° ADT*
+45° and -45°
76.9 inches
140
1710–2200 MHz
20.8 dBi
800 10439V01
0°
+45° and -45°
85.5 inches
156
1710–2200 MHz
21.1 dBi
800 10378
0°– 6° ADT*
+45° and -45°
100.3 inches
142
68°
1710–2170 MHz
11.5 dBi
800 10761
0°
+45° and -45°
10.9 inches
150
88°
1710–2170 MHz
11.5 dBi
741 984V01
0°
+45° and -45°
13.5 inches
157
1710–2170 MHz
18 dBi
741 990V01
0°– 6° ADT*
+45° and -45°
76.5 inches
147
65°
X Polarization
•
Adjustable / Fixed Electrical Downtilt
Horizontal
Beamwidth
Frequency
Gain
Model
Electrical
Downtilt
Polarization
Height
40°
1710–2690 MHz
19.6 dBi
800 10678
2°– 12° ADT*
+45° and -45°
47.2 inches
124
65°
1710–2690 MHz
16.3 dBi
800 10681
0°– 12° ADT*
+45° and -45°
33.5 inches
131
1710–2690 MHz
17.9 dBi
800 10621V02
2°– 14° ADT*
+45° and -45°
51.7 inches
136
85°
Page
1710–2690 MHz
19 dBi
800 10651
0°–6° ADT*
+45° and -45°
65.7 inches
141
1710–2690 MHz
16.6 dBi
800 10679
2°– 10° ADT*
+45° and -45°
54.6 inches
146
1710 – 2690 MHz •
XX Polarization
1710 to 2690 MHz
Antennas
1710 – 2690 MHz •
Page
•
Adjustable / Fixed Electrical Downtilt
Horizontal
Beamwidth
Frequency
Gain
Model
Electrical
Downtilt
Polarization
Height
65°
1710–2690 MHz
16.2 dBi
800 10682
0°– 12° ADT*
2 x +45° and -45°
33.7 inches
132
1710–2690 MHz
17.8 dBi
800 10622
0°– 12° ADT*
2 x +45° and -45°
55.7 inches
144
1710–2690 MHz
18.7 dBi
800 10652
0°– 12° ADT*
2 x +45° and -45°
65.7 inches
145
Page
*ADT - Adjustable Electrical Downtilt
1710 – 2180 MHz • V Polarization
Trisector • 1710-2170 MHz • X Polarization • Adjustable Electrical Downtilt
See the following page for summary list.
121
1710 to 2690 MHz Antennas
1710 – 2180 MHz •
V Polarization
Horizontal
Beamwidth
Frequency
Gain
Model
Electrical
Downtilt
Polarization
Height
13°
1710–2180 MHz
18.4 dBi
800 10368
0°
V
11.8 inches
Page
158
Trisector • 1710-2170 MHz • X Polarization • Adjustable Electrical Downtilt
Horizontal
Beamwidth
65°
Model
Electrical
Downtilt
Polarization
Height
15.5 dBi
800 10375
0°–12° ADT
+45° and -45°
48.9 inches (1241 mm)
159
17.6 dBi
800 10360
0°–10° ADT
+45° and -45°
71.8 inches (1823 mm)
159
850 10010
Flexible Sealing Frame for Trisector Antenna
Gain
1710 to 2690 MHz
Antennas
*ADT - Adjustable Electrical Downtilt
122
Page
160
742 351V01
30° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
1710–2170
X
30°
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Front-to-back ratio
Connector
Isolation
Maximum input power
Tracking
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
1710–2170 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
30 dB (co-polar)
2 x 7-16 DIN female
30 dB
300 watts (at 50°C) per input
0.5 dB
1°
30.9 lb (14 kg)
35.3 lb (16 kg) clamps included
51.3 x 11.8 x 2.7 inches
(1304 x 299 x 69 mm)
at 93 mph (150kph)
122 lbf / 31 lbf / 144 lbf
(540 N) / (135 N) / (640 N)
M (Medium)
120 mph (200 kph)
62.6 x 12.7 x 4.3 inches
(1589 x 322 x 108 mm)
37.5 lb (17.5 kg)
0°–8°
2.625 inches 0.125
(68 mm 4)
51.3 inches
(1304 mm)
54.4 inches
(1381 mm)
55.9 inches
(1421 mm)
–45o
+45o
Profile PF8
1710-2170
-45°
1710-2170
+45°
7-16 DIN
7-16 DIN
Specifications
Gain
Horizontal beamwidth
Horizontal sidelobe suppression
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
30°
2.7 inches
(69 mm)
1710–1880 MHz
1850–1990 MHz
20.2 dBi
20.5 dBi
36° (half-power)
35° (half-power)
14 dB
14 dB
7.4° (half-power)
7° (half-power)
0°–8°
0°–8°
(manual or optional remote control)
0° 4° 8° T
0° 4° 8° T
18 17 16 dB
18 18 17 dB
0° 4° 8° T
18 17 16 dB
20 dB (typical)
10 dB
20 dB (typical)
10 dB
20 dB (typical)
10 dB
1920–2170 MHz
20.7 dBi
33° (half-power)
14 dB
6.7° (half-power)
0°–8°
11.8 inches
(299 mm)
Horizontal pattern
45°- polarization
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
Vertical pattern
45°- polarization
0–8° electrical downtilt
11280-B
936.3977/b
123
NEW
800 10678
40° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
1710–2690
X
40°
2°–10°
General specifications
2.5 inches
(64 mm)
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Electrical downtilt
Isolation, between ports
Maximum input power
Weight
47.2 inches
(1200 mm)
55.4 inches
(1406 mm)
1710–2690 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
2°–10° (continously adjustable)
30 dB
300 watts (at 50°C) per input
26.5 lb (12 kg)
30.9 lb (14 kg) clamps included
47.2 x 10.8 x 2.7 inches
(1200 x 275 x 69 mm)
120 mph (200 kph)
66.3 x 13.3 x 4.2 inches
(1685 x 221 x 107 mm)
Dimensions
56.5 inches
(1435 mm)
Wind survival rating
Shipping dimensions
1710 – 1990 MHz +45° –45° o arization
45°
7 0°
2.7 inches
(69 mm)
10
10.8 inches
(275 mm)
Profile PF6
Specifications
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Front-to-back ratio (co-polar)
Horizontal pattern
Sidelobe suppression for
sidelobes beside main beam
Vertical pattern
Sidelobe suppression for
sidelobes beside main beam
Cross polar ratio
0°
Sector
60°
124
11429-FRO
936.A2716/b
Horizonta
10
attern
ertica attern
2°–10° e ectrica o nti t
1710–1990 MHz
19.2 dBi
45° (half-power)
1920–2200 MHz
19.6 dBi
41° (half-power)
2200–2490 MHz
19.5 dBi
39° (half-power)
2490–2690 MHz
20 dBi
36° (half-power)
7° (half-power)
6° (half-power)
5.2° (half-power)
5° (half-power)
30 dB
30 dB
30 dB
30 dB
18 dB
18 dB
18 dB
18 dB
15 dB
20 dB (typical)
10 dB
1710–2690
–45
1710–2690
+45
7 16
7 16
15 dB
20 dB (typical)
10 dB
15 dB
20 dB (typical)
9 dB
15 dB
20 dB (typical)
10 dB
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
742 218V01
45° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
1710–2170
X
45°
Dual Polarization
HPBW
Adj. Electrical Downtilt
0°–8°
Manual, or optional remote control
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation
Maximum input power
Tracking
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
1710–2170 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
30 dB
300 watts (at 50°C) per input
0.5 dB
1.5°
23.1 lb (10.5 kg)
27.6 lb (12.5.kg) clamps included
51.4 x 7.8 x 2.7 inches
(1306 x 199 x 69 mm)
at 93 mph (150kph)
102 lbf / 33 lbf / 111 lbf
(450 N) / (145 N) / (490 N)
M (Medium)
120 mph (200 kph)
63.1 x 8.7 x 4.2 inches
(1604 x 221 x 107 mm)
32 lb (14.5 kg)
1710–2170
–45
1710–2170
+45
7 16
7 16
Specifications
Gain
Front-to-back ratio
(180° 30)
power)
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression:
first sidelobeabove main beam
Horizontal pattern
Cross polar ratio
Main direction
0°
Sector
30°
1710–1880 MHz
19 dBi
27 dB (co-polar)
25 dB (total power)
2.5 inches
(64 mm)
51.4 inches
(1306 mm)
55.6 inches
(1412 mm)
56.8 inches
(1442 mm)
2.7 inches
(69 mm)
7.8 inches
(199 mm)
Profile PF6
1850–1990 MHz
1920–2170 MHz
19.5 dBi
19.6 dBi
30 dB (co-polar)
27 dB (co-polar)
25 dB (total power)
25 dB (total
47° (half-power)
45° (half-power)
7.3° (half-power)
7° (half-power)
0°–8°
0°–8°
(manual or optional remote control)
0° 2° 5° 8° T
0° 2° 5° 8° T
17 17 15 15 dB
18 18 17 17 dB
18 dB
18 dB
0° 2° 5° 8° T
18 18 15 15 dB
18 dB
18 dB (typical)
13 dB
18 dB (typical)
13 dB
18 dB (typical)
13 dB
44° (half-power)
6.7° (half-power)
0°–8°
Horizontal pattern
45°- polarization
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
Vertical pattern
45°- polarization
0–8° electrical downtilt
11289-B
936.3939/a
125
742 219V01
45° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
1710–2180
X
45°
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
0°–6°
General specifications
2.5 inches
(64 mm)
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation
Maximum input power
Tracking, average
Squint
Weight
76.6 inches
(1946 mm)
80.8 inches
(2052 mm)
82 inches
(2082 mm)
Dimensions
Wind load
Front/Side/Rear
N) / (740 N)
Mounting category
Wind survival rating
Shipping dimensions
M (Medium)
120 mph (200 kph)
88.3 x 8.7 x 4.2 inches
(2244 x 221 x 107 mm)
39.7 lb (18 kg)
Shipping weight
2.7 inches
1710–2180 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
30 dB
300 watts (at 50°C) per input
1 dB
2°
30.9 lb (14 kg)
35.3 lb (16.kg) clamps included
76.6 x 7.8 x 2.7 inches
(1946 x 199 x 69 mm)
at 93 mph (150kph)
158 lbf / 50 lbf / 167 lbf
(700 N) / (220
(69 mm)
7.8 inches
(199 mm)
1710–2170
–45
1710–2170
+45
7 16
7 16
Profile PF6
3
30
n
0n
33
0n
10
30
0n
n
60
20
270n
90n
12
0n
0n
15
21
0n
0n
24
180n
Horizontal pattern
45°- polarization
30
n
0n
33
0n
3
10
30
0n
n
60
20
30
270n
90n
tilt
dBi
Front-to-back ratio
(180° 30°)
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression:
first sidelobe above main beam
Horizontal pattern
Cross polar ratio
Main direction
0°
Sector
30°
1710–1880 MHz
1850–1990 MHz
0°
3°
6°
0°
3°
6°
20.5 20.6 20.3
20.9 21.1 20.9
28 dB (co-polar)
27 dB (co-polar)
25 dB (total power)
25 dB (total power)
48° (half-power)
45° (half-power)
4.7° (half-power)
4.5° (half-power)
0°–6°
0°–6°
(manual or optional remote control)
0° 2° 4° 6° T
0° 2° 4° 6° T
18 18 16 16 dB
18 18 17 16 dB
18 dB
18 dB
0° 2° 4° 6° T
18 18 17 16 dB
18 dB
19 dB (typical)
13 dB
17 dB (typical)
13 dB
18 dB (typical)
13 dB
1920–2180 MHz
0°
3°
6°
21
21.4 21
25 dB (co-polar)
25 dB (total power)
44° (half-power)
4.4° (half-power)
0°–6°
12
0n
180n
0n
15
21
0n
0n
24
Vertical pattern
45°- polarization
0–6° electrical downtilt
126
Specifications
Average gain
30
11290-B
936.3941/a
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
NEW
40°
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
uad Port Split Beam Panel Antenna
Antenna 1
Antenna 2
1710–2200
X
40°
1710–2200
X
40°
2°–14°
2°–14°
Adj. Electrical Downtilt
Manual, or optional remote control
800 10605
General specifications
1710–2200 MHz
Beam A (-30°), Beam B (+30°)
50 ohms
1.5:1
IM3: -150 dBc
+45°, -45° +45°, -45°
30 dB (co-polar)
25 dB (total power)
200 watts per input (at 50°C)
4 x 7-16 DIN female
28 dB
Beam A
Beam B
0°
33
0°
3
°
Maximum input power
Connector
Isolation
Horizontal pattern
Sidelobe suppression for
18 dB
sidelobes beside main beam
Vertical pattern
Sidelobe suppression for
16 dB
first sidelobe above main beam
Electrical downtilt
2°–14° (continuously adjustable)
Weight
26.5 lb (12 kg)
30.9 lb (14 kg) clamps included
Dimensions
27.5 x 15 x 5.9 inches (698 x 380 x 150 mm)
Wind load
at 93 mph (150kph)
Front/Side/Rear
90 lbf / 26 lbf / 102 lbf
(400 N) / (115 N) / (450 N)
Mounting category
M (Medium)
Wind survival rating
120 mph (200 kph)
Shipping dimensions
42.5 x 15.8 x 6.8 inches
(1080 x 402 x 172 mm)
30
Frequency range
Azimuth direction
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Front-to-back ratio
10
30
0°
14° (half-power)
13° (half-power
15 dB (typical)
8 dB
15 dB (typical)
8 dB
270°
90°
12
0°
0°
24
15 dB (typical)
8 dB
1710–2200
+45o
Beam A
(–30o)
1710–2200
–45o
Beam A
(–30o)
7-16
7-16
7-16
7-16
0°
3
10
° +45
45
° –
° +
5
Be 45°
–4
am
0°)
RC
3
U
(+
A(
RC m B
–3 U
0
a
°)
Be
Layout of interface
30
0°
30
270°
90°
12
0°
0°
24
21
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
742 034
Three-panel Sector Mounting Kit
(120 deg. ea.) for 5.5 inch
(139.7 mm) OD mast.
Reference the Mechanical Accessories section.
180°
0°
15
Mounting E uipment
°
60
20
0°
1710–2200
+45o
Beam B
(+30o)
180°
Horizontal pattern
45°- polarization
0°
33
1710–2200
–45o
Beam B
(+30o)
°
30
°
14.5° (half-power)
60
20
0°
1920–2200 MHz
2°
7° 14° T
17.5 17.4 16.8 dBi
37° (half-power)
15
Horizontal beamwidth
(offset beams 30°)
Vertical beamwidth
Cross polar ratio
Main direction -30° +30°
Sector -60° 0° 0° +60°
1850–1990 MHz
2° 7° 14° T
17 16.8 16.5 dBi
40° (half-power)
30
Gain
1710–1880 MHz
2°
7° 14° T
16.5 16.5 16.2 dBi
43° (half-power)
21
0°
Specifications
Vertical pattern
45°- polarization
Beam A (-30°), Beam B (+30°)
2–14° electrical downtilt
11309-D
936.4256/a
127
800 10605
40°
uad Port Split Beam Panel Antenna
0°
Antenna I
Beam A
0
330°
30°
Antenna I
Beam B
2.625 inches 0.125
(68 mm 4)
3
6
300°
60°
10
20
270°
90°
Antenna II
Beam B
Antenna III
Beam A
27.5 inches
(698 mm)
120°
240°
Antenna II
Beam A
150°
210°
34.2 inches
(868 mm)
35.4 inches
(898 mm)
Antenna III
Beam B
180°
Horizontal Patterns (top view)
Antenna I
47 Dou
0 t
m
m
5.9 inches
(150 mm)
Antenna III
15 inches
(380 mm)
Antenna II
Bottom view
ector c a
Specifications
Angle between antennas
Suitable for mast diameter
Number of pieces
Mountin
u
Materials
3 sector clamp
Hot-dip galvanized steel
Mounting support clamp
Aluminum
Screws
Hot-dip galvanized steel
Nuts
Stainless steel
18.5 inches (470 mm)
Outer diameter (Dout) of the
3 Dual-beam Panel Arrangement
Customer assumes all responsibility to ensure that the mounting pipe
is adequate to support the intended load. For use with steel pipe only
(not aluminum) with a minimum 0.25 inch (6 mm) wall thickness.
ort c a
°
M
60
Specifications
Weight
Wind load
Front/Side/Rear
Wind survival rating
Dimensions
or ue 25
128
742 034 Sector Bracket
120°
5.5 inches (139.7 mm) OD.
2 x 3 sector clamp
2 x mounting support clamp
inches
mm
3 Panel Arrangement
88.2 lb (40 kg)
at 93 mph (150kph)
146 lbf / 146 lbf / 146 lbf
(560 N) / (560 N) / (560 N)
120 mph (200 kph)
742 034 sector bracket with 800 10605 antennas
A
B
C
D
E
F
G
Dout
5.5
3.9 9.3 9
2.5
2
1.8
18.5
139.7 100 236 228 64
50 45
470
800 10606V01
45°
Mounting Clamps Included
Dual Polarization
HPBW
Antenna 1
Antenna 2
1710–2200
X
45°
1710–2200
X
45°
0°–10°
0°–10°
Adj. Electrical Downtilt
Manual, or optional remote control
2.625 inches 0.125
(68 mm 4)
General specifications
Frequency range
Azimuth direction
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Front-to-back ratio
1710–2200 MHz
Beam A (-30°), Beam B (+30°)
50 ohms
1.5:1
IM3: -150 dBc
+45°, -45°, +45°, -45°
30 dB (co-polar)
25 dB (total power)
200 watts per input (at 50°C)
4 x 7-16 DIN female
30 dB
Maximum input power
Connector
Isolation
Horizontal pattern
Sidelobe suppression for
18 dB
sidelobes beside main beam
Vertical pattern
Sidelobe suppression for
18 dB
first sidelobe above main beam
Electrical downtilt
0°–10° (continuously adjustable)
Weight
41.9 lb (19 kg)
46.3 lb (21 kg) clamps included
Dimensions
51.7 x 15 x 5.9 inches
(1314 x 380 x 150 mm)
Wind load
at 93 mph (150kph)
Front/Side/Rear
160 lbf / 45 lbf / 185 lbf
(710 N) / (200 N) / (820 N)
Mounting category
M (Medium)
Wind survival rating
120 mph (200 kph)
Shipping dimensions
66.8 x 15.8 x 6.8 inches
(1696 x 402 x 172 mm)
51.7 inches
(1314 mm)
58.4 inches
(1484 mm)
59.6 inches
(1514 mm)
5.9 inches
(150 mm)
15 inches
(380 mm)
Beam A
0o
33
0o
3
Beam B
30
o
uad Port (MHz)
uad Port Split Beam Panel Antenna
10
Specifications
1710–1880 MHz
19 dBi
47° (half-power)
5° +45°
+4
–
5°
4
Be 45°
–
am
0°)
RC
3
U
(+
A(
RC m B
–3 U
0
a
°)
Be
Layout of interface
30
0o
270o
90o
12
0o
0o
24
180o
Horizontal pattern
45°- polarization
1920–2200 MHz
19.5 dBi
43° (half-power)
0o
3
10
30
7.2° (half-power)
7.1° (half-power)
0o
6.8° (half-power
o
60
20
30
18 dB (typical)
13 dB
17 dB (typical)
13 dB
16 dB (typical)
13 dB
270o
90o
12
0o
0o
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
742 034
Three-panel Sector Mounting Kit
(120 deg. ea.) for 5.5 inch
(139.7 mm) OD mast.
Reference the Mechanical Accessories section.
21
0
180o
0o
15
Mounting E uipment
o
24
Model
2 x 738 546
o
30
7-16
1850–1990 MHz
19.3 dBi
45° (half-power)
60
20
0o
33
Gain
Horizontal beamwidth
(offset beams 30°)
Vertical beamwidth
Cross polar ratio
Main direction -30° +30°
Sector -60° 0° 0° +60°
7-16
1710–2200
–45o
Beam A
(–30o)
30
o
7-16
1710–2200
+45o
Beam A
(–30o)
0o
15
7-16
1710–2200
+45o
Beam B
(+30o)
21
0o
1710–2200
–45o
Beam B
(+30o)
Vertical pattern
45°- polarization
Beam A (-30°), Beam B (+30°)
0–10° electrical downtilt
11308-B
936.4001/b
129
800 10606V01
45°
uad Port Split Beam Panel Antenna
0°
Antenna I
Beam A
0
330°
30°
Antenna I
Beam B
3
6
300°
60°
10
20
270°
90°
Antenna II
Beam B
Antenna III
Beam A
120°
240°
Antenna II
Beam A
150°
210°
Antenna III
Beam B
180°
Horizontal Patterns (top view)
47 Dou
0 t
m
m
Antenna I
Antenna III
Antenna II
Bottom view
ector c a
Specifications
Angle between antennas
Suitable for mast diameter
Number of pieces
Mountin
u
Materials
3 sector clamp
Hot-dip galvanized steel
Mounting support clamp
Aluminum
Screws
Hot-dip galvanized steel
Nuts
Stainless steel
18.5 inches (470 mm)
Outer diameter (Dout) of the
3 Dual-beam Panel Arrangement
Customer assumes all responsibility to ensure that the mounting pipe
is adequate to support the intended load. For use with steel pipe only
(not aluminum) with a minimum 0.25 inch (6 mm) wall thickness.
ort c a
M
60
°
Specifications
Weight
Wind load
Front/Side/Rear
Wind survival rating
Dimensions
or ue 25
130
742 034 Sector Bracket
120°
5.5 inches (139.7 mm) OD.
2 x 3 sector clamp
2 x mounting support clamp
inches
mm
3 Panel Arrangement
130.1 lb (59 kg)
at 93 mph (150kph)
214 lbf / 214 lbf / 214 lbf
(950 N) / (950 N) / (950 N)
120 mph (200 kph)
742 034 sector bracket with 800 10606 antennas
A
B
C
D
E
F
G
Dout
5.5
3.9 9.3 9
2.5
2
1.8
18.5
139.7 100 236 228 64
50 45
470
800 10681
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
HPBW
Adj. Electrical Downtilt
0°–12°
Manual, or optional remote control
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Electrical downtilt
2.625 inches 0.125
(68 mm 4)
1710–2690 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female (long neck)
0°–12° (continously adjustable)
(manual or remote control)
30 dB
250 watts (at 50°C) per input
11 lb (5 kg)
33.5 x 6.1 x 2.8 inches
(851 x 155 x 70 mm)
at 93 mph (150kph)
48 lbf / 14 lbf / 50 lbf
(210 N) / (60 N) / (220 N)
L (Light)
120 mph (200 kph)
45.1 x 6.8 x 3.6 inches
(1146 x 172 x 92 mm)
14.3 lb (6.5 kg)
Isolation, between ports
Maximum input power
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
36.5 inches
(926 mm)
35.3 inches
(896 mm)
33.5 inches
(851 mm)
–45o
7-16
7-16
Profile PF5
6.1 inches
(155 mm)
0o
1710–2690
+45o
2.8 inches
(70 mm)
33
1710–2690
–45o
+45o
0o
3
o
Dual Polarization
1710–2690
X
65°
30
Single Band (MHz)
10
30
0o
1920–2200 MHz
16.3 dBi
64° (half-power)
2200–2490 MHz
16.7 dBi
60° (half-power)
2490–2690 MHz
16.7 dBi
60° (half-power)
o
60
20
30
270o
90o
12
0o
0o
24
0° 6° 12° T
13 14 15 dB
28 dB (typical)
8 dB
23 dB
0° 6° 12° T
13 14 16 dB
28 dB (typical)
8 dB
8.4° (half-power)
23 dB
0° 6° 12° T
15 15 17 dB
28 dB (typical)
11 dB
180o
Horizontal pattern
45°- polarization
0o
3
o
0° 6° 12° T
12 13 15 dB
25 dB (typical)
9 dB
25 dB
8.8° (half-power)
30
25 dB
9.9° (half-power)
0o
15
10.8° (half-power)
0o
33
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Front-to-back ratio
(180° 30°)
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
0°
Sector
60°
1710–1990 MHz
15.5 dBi
67° (half-power)
21
0o
Specifications
10
30
0o
o
60
20
30
270o
Mounting E uipment
90o
2 x 738 546
(optional)
850 10013
(optional)
Reference the Mechanical Accessories section.
12
0o
0o
o
24
21
0
Description
Mounting Kit for 1.8 to 4.9 inch
(45 to 125 mm) OD mast.
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
Tilt Mount Kit
0–25 degrees downtilt angle for use with
2 x 738 546 mounting kit
180o
0o
15
Model
734 365
Vertical pattern
45°- polarization
0–12° electrical downtilt
11214-B
936.4019/a
131
800 10682
65°
uad Port Panel Antenna
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
1710–2690
X
65°
1710–2690
X
65°
0°–12°
0°–12°
Adj. Electrical Downtilt
Manual, or optional remote control
2.625 inches 0.125
(68 mm 4)
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Electrical downtilt
41.7 inches
(1066 mm)
36.2 inches
(920 mm)
Isolation, between ports
Maximum input power
Weight
33.7 inches
(855 mm)
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
2.8 inches
(71 mm)
Shipping weight
Profile PF8
12.7 inches
(323 mm)
11° (half-power)
10° (half-power)
9° (half-power)
8.7° (half-power)
30 dB
0° 6° 12° T
12 13 15 dB
25 dB (typical)
8 dB
30 dB
0° 6° 12° T
13 14 16 dB
25 dB (typical)
8 dB
30 dB
0° 6° 12° T
13 15 16 dB
25 dB (typical)
8 dB
28 dB
0° 6° 12° T
15 15 17 dB
25 dB (typical)
10 dB
30
o
0o
30
0o
3
o
60
0o
90o
12
0o
0o
24
180o
0o
15
0o
15
Horizontal pattern
45°- polarization
270o
0o
12
0o
24
0o
0o
20
21
90o
21
7-16
30
270o
11215-A
936.3770/b
7-16
2490–2690 MHz
16.7 dBi
61° (half-power)
30
132
7-16
10
o
60
20
180o
7-16
2200–2490 MHz
16.6 dBi
60° (half-power)
33
0o
33
0o
1710–2690
–45o
1920–2200 MHz
16.2 dBi
64° (half-power)
10
30
1710–2690
+45o
1710–1990 MHz
15.8 dBi
65° (half-power)
0o
3
1710–2690
–45o
o
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Front-to-back ratio (co-polar)
Sidelobe suppression for
First sidelobe above main beam
Cross polar ratio
0°
Sector
60°
1710–2690
+45o
30
Specifications
1710–2690 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female
0°–12° (continously adjustable)
(manual or remote control)
30 dB
250 watts (at 50°C) per input
24.3 lb (11 kg)
28.7 lb (13 kg) clamps included
33.7 x 12.7 x 2.8 inches
(855 x 323 x 71 mm)
at 93 mph (150kph)
99 lbf / 23 lbf / 104 lbf
(440 N) / (100 N) / (460 N)
M (Medium)
120 mph (200 kph)
45.1 x 13.3 x 4.1 inches
(1146 x 337 x 104 mm)
32 lb (14.5 kg)
Vertical pattern
45°- polarization
0–12° electrical downtilt
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–25 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10644
65° Multi Band
Mounting Clamps Included
2490–2690
X
61°
0°–10°
0°–10°
Adj. Electrical Downtilt
Manual, or optional remote control
General specifications
0o
90o
12
0o
0o
21
0o
21
180o
0o
Horizontal pattern
45°- polarization
Vertical pattern
45°- polarization
0°–10° electrical downtilt
2490–2690 MHz
0o
0o
3
10
10
30
0o
o
3
30
0o
33
30
0o
0o
6
20
o
60
20
30
30
90o 270o
12
0o
0o
21
1710–1990 MHz
17.5 dBi
68° (half-power)
1920–2170 MHz
17.7 dBi
65° (half-power)
2490–2690 MHz
18 dBi
61° (half-power)
6.7° (half-power)
6.3° (half-power)
5.4° (half-power)
25 dB
0–10 degrees
25 dB
0–10 degrees
25 dB
0–10 degrees
0° 5° 10° T
17 17 16 dB
0° 5° 10° T
17 17 16 dB
0° 5° 10° T
17 17 16 dB
0o
24
180o
0o
7-16
12
0o
0o
180o
90o
15
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Front-to-back ratio (180° 30°)
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
Maximum input power
(at 50°C)
0o
15
180o
12
24
0o
Specifications
90o
0o
0o
24
2490–2690
+45o
7-16
270o
15
7-16
30
o
33
270o
Horizontal pattern
45°- polarization
7-16
o
60
30
0o
2490–2690
–45o
3
20
30
24
1710–2170
+45o
0o
6
270o
1710–2170
–45o
30
0o
20
0o
Shipping weight
0o
33
Mounting category
Wind survival rating
Shipping dimensions
30
0o
10
10
0o
Wind load
Front/Side/Rear
3
15
Dimensions
1710–2170 MHz
0o
0o
Weight
1710–2170 MHz / 2490–2690 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female
30 dB (intrasystem)
29 dB (intersystem)
22 lb (10 kg)
26.5 lb (12 kg) clamps included
55.5 x 6.1 x 3.5 inches
(1410 x 155 x 89 mm)
at 93 mph (150kph)
84 lbf / 33 lbf / 90 lbf
(370 N) / (145 N) / (400 N)
M (Medium)
120 mph (200 kph)
69.5 x 7.2 x 4.8 inches
(1765 x 182 x 122 mm)
30.9 lb (14 kg)
33
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation
21
HPBW
1710–2170
X
65°
30
o
Dual Polarization
Antenna 2
30
o
Multi Band (MHz)
Antenna 1
uad Port Panel Antenna
Vertical pattern
45°- polarization
0°–10° electrical downtilt
Profile PF11
25 dB (typical)
25 dB (typical)
8 dB
8 dB
200 watts per input
400 watts total
25 dB (typical)
10 dB
200 watts per input
400 watts total
Mounting E uipment
Model
2 x 738 546
850 10013
(optional)
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
Tilt Mount Kit
0–15 degrees downtilt angle
Reference the Mechanical Accessories section.
11311-B
936.3803/a
133
800 10644
65° Multi Band
uad Port Panel Antenna
2.625 inches 0.125
(68 mm 4)
59.4 inches
(1509 mm)
58.2 inches
(1479 mm)
55.5 inches
(1410 mm)
3.5 inches
(89 mm)
6.1 inches
(155 mm)
134
1710–2170
–45o
1710–2170
+45o
2490–2690
–45o
2490–2690
+45o
7-16
7-16
7-16
7-16
800 10247V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
1710–2200
X
65°
Dual Polarization
HPBW
Adj. Electrical Downtilt
0°–12°
Manual, or optional remote control
2.5 inches
(64 mm)
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation
Maximum input power
Tracking, average
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
1710–2200 MHz
1.4:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
30 dB
300 watts (at 50°C) per input
0.5 dB
2°
9.9 lb (4.5 kg)
28.9 x 6.1 x 2.7 inches
(735 x 155 x 69 mm)
at 93 mph (150kph)
44 lbf / 16 lbf / 50 lbf
(195 N) / (70 N) / (220 N)
L (Light)
120 mph (200 kph)
40 x 6.8 x 3.6 inches
(1015 x 172 x 92 mm)
12.1 lb (5.5 kg)
32.2 inches
(819 mm)
31 inches
(789 mm)
28.9 inches
(735 mm)
–45o
2.7 inches
(69 mm)
+45o
Profile PF5
6.1 inches
(155 mm)
1710–1880 MHz
0°
4°
8° 12°
15.5 15.4 15.3 15.1
67° (half-power)
1850–1990 MHz
0°
4°
8° 12°
15.6 15.5 15.4 15
66° (half-power)
1920–2200 MHz
0°
4°
8° 12°
15.8 15.7 15.5 14.9
64° (half-power)
12.9° (half-power)
12.3° (half-power)
11.5° (half-power)
0°–12°
0°–12°
0°–12°
27 dB (co-polar)
0°
14
4°
14
8°
14
12°
14
20 dB (typical)
10 dB
0°
14
4°
8°
14 14
27 dB (co-polar)
12°
14
0°
14
20 dB (typical)
10 dB
12°
14
o
o
Mounting E uipment
o
o
o
o
o
Horizontal pattern
45°- polarization
o
o
o
o
o
o
o
o
Description
Mounting Kit for 1.8 to 4.9 inch
(45 to 125 mm) OD mast.
732 327
Tilt Kit for use with the above
mounting kits,
0–40 degrees downtilt angle.
Reference the Mechanical Accessories section.
o
Model
734 365
o
7 16
o
o
7 16
8°
14
o
1710–2200
+45
4°
14
20 dB (typical)
10 dB
o
1710–2200
–45
27 dB (co-polar)
o
tilt
dBi
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continously adjustable
Front-to-back ratio
Sidelobe suppression
for first sidelobe
tilt
above main beam
dB
Cross polar ratio
Main direction
0°
Sector
60°
o
Gain
o
Specifications
Vertical pattern
45°- polarization
0–12° electrical downtilt
11298-A
936.3924/b
135
NEW
800 10621V02
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
1710–2690
X
65°
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
2°–14°
General specifications
2.5 inches
(64 mm)
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation
Maximum input power
Tracking, avg.
Weight
51.7 inches
(1314 mm)
53.5 inches
(1359 mm)
54.7 inches
(1389 mm)
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
2.8 inches
(70 mm)
6.1 inches
(155 mm)
Shipping weight
1710–2690 MHz
1.5:1
50 ohms
IM3: -150dBc
+45° and -45°
2 x 7-16 DIN female
30 dB
400 watts per input
1.5 dB
14.3 lb (6.5 kg)
18.7 lb (8.5 kg) clamps included
57.2 x 6.1 x 2.8 inches
(1452 x 154 x 70 mm)
at 93 mph (150kph)
84 lbf / 23 lbf / 86 lbf
(370 N) / (100 N) / (380 N)
M (Medium)
120 mph (200 kph)
67.9 x 6.8 x 3.6 inches
(1725 x 172 x 92 mm)
21.8 lb (9.9 kg)
Profile PF8
Gain
Front-to-back ratio (180° 30°)
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression
first sidelobe above main beam
within 0°–20° sector above horizon
Cross polar ratio
Main direction
0°
Sector
60°
2200–2490 MHz
2°
8° 14° T
18.1 18.6 18.3 dBi
25 dB
59° (half-power)
2490–2690 MHz
2°
8° 14° T
18.4 18.7 18.2 dBi
25 dB
58° (half-power)
6.7° (half-power)
6° (half-power)
5.3° (half-power)
5° (half-power)
2°–14°
2°–14°
(manual or optional remote control)
2° 8° 14° T
2° 8° 14° T
18 18 18 dB
18 18 18 dB
17 17 16 dB
17 17 16 dB
2°–14°
2°–14°
25 dB (typical)
10 dB
25 dB (typical)
10 dB
30
°
0°
3
1920–2200 MHz
2°
8° 14° T
17.9 18.2 18.1 dBi
25 dB
63° (half-power)
33
0°
33
0°
1710–1990 MHz
2°
8° 14° T
17.4 17.6 17.5 dBi
25 dB
68° (half-power)
0°
60
20
°
30
0°
0°
0°
22 dB (typical)
10 dB
1710–2690
–45o
1710–2690
+45o
7-16
7-16
0°
180°
0°
Horizontal pattern
45°- polarization
12
0°
24
15
0°
15
21
2° 8° 14° T
18 18 18 dB
17 17 14 dB
°
90°
0°
12
0°
24
270°
21
90°
11446-A
936.4546
60
2° 8° 14° T
18 18 18 dB
17 17 16 dB
30
270°
136
3
20
30
180°
0°
10
10
30
24 dB (typical)
10 dB
30
°
Specifications
Vertical pattern
45°- polarization
0–12° electrical downtilt
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Kit for use with above mounting kit
(optional)
0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
742 214V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
1710–2170
X
65°
Adj. Electrical Downtilt
0°–8°
Manual, or optional remote control
2.5 inches
(64 mm)
General specifications
Mounting category
Wind survival rating
Shipping dimensions
30
o
0o
0o
3
33
33
0o
0o
o
60
20
30
0o
90o
12
0o
0o
24
6.1 inches
(155 mm)
12
0o
0o
24
o
21
0
180o
0o
15
o
o
60
90o
0o
21
0
2.8 inches
(70 mm)
270o
15
Horizontal pattern
45°- polarization
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for:
3
30
270o
Specifications
47.9 inches
(1216 mm)
0o
20
30
180o
46.7 inches
(1186 mm)
10
10
30
45 inches
(1142 mm)
o
Dimensions approx.
Wind load
Front/Side/Rear
1710–2170 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
30 dB (co-polar)
300 watts per input (at 50°C)
0–8 degrees
(manual or optional remote control)
2 x 7-16 DIN female
30 dB
1 dB
2.5°
9.9 lb (4.5 kg)
14.3 lb (6.5 kg) clamps included
45 x 6.1 x 2.8 inches (1142 x 155 x 70 mm)
at 93 mph (150kph)
66 lbf / 18 lbf / 68 lbf
(290 N) / (80 N) / (300 N)
M (Medium)
120 mph (200 kph)
56.1 x 6.8 x 3.7 inches (1425 x 172 x 95 mm)
30
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Front-to-back ratio
Maximum input power
Electrical downtilt
continuously adjustable
Connector
Isolation
Tracking
Squint
Weight
Vertical pattern
45°- polarization
0°–8° electrical downtilt
Profile PF5
1710–1880 MHz
17.5 dBi
66° (half-power)
1850–1990 MHz
17.7 dBi
64° (half-power)
1920–2170 MHz
18 dBi
62° (half-power)
8.3° (half-power)
7.8° (half-power)
7.4° (half-power)
0°
4°
8° T
1st sidelobe above horizon, avg. 20 20 20 dB
Cross polar ratio
0°
25 dB (typical)
Sector
60°
10 dB
0°
4°
8° T
20 20 20 dB
25 dB (typical)
10 dB
0°
4°
8° T
1710–2170 1710–2170
-45°
+45°
7-16 DIN
7-16 DIN
20 20 20 dB
28 dB (typical)
10 dB
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
11266-A
936.3886/a
137
742 215V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
1710–2200
X
65°
0°–10°
General specifications
2.5 inches
(64 mm)
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Front-to-back ratio
(180° 30°)
Maximum input power
Electrical downtilt
continuously adjustable
Connector
Isolation
Cross polar ratio
Main direction
0°
Sector
60°
Tracking, average
Squint
Weight
51.7 inches
(1314 mm)
53.5 inches
(1359 mm)
54.7 inches
(1389 mm)
Dimensions
Wind load
Front/Side/Rear
2.8 inches
(70 mm)
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
Profile PF10
1710–2200 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
30 dB (co-polar)
25 dB (total power)
300 watts per input (at 50°C)
0–10 degrees
2 x 7-16 DIN female
30 dB
25 dB (typical)
10 dB
0.5 dB
1.5°
14.3 lb (6.5 kg)
18.7 lb (8.5 kg) clamps included
51.7 x 6.1 x 2.8 inches
(1314 x 155 x 70 mm)
at 93 mph (150kph)
75 lbf / 21 lbf / 77 lbf
(330 N) / (90 N) / (340 N)
L (Light)
120 mph (200 kph)
62.8 x 6.8 x 3.6 inches
(1595 x 172 x 92 mm)
22 lb (10 kg)
6.1 inches
(155 mm)
1710–2200 1710–2200
-45°
+45°
7-16 DIN
Specifications
Horizontal pattern
45°- polarization
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Vertical Pattern–sidelobe
suppression for first sidelobe above main beam
7-16 DIN
1710–1880 MHz
17.7 dBi
68° (half-power)
1850–1990 MHz
17.9 dBi
66° (half-power)
1920–2200 MHz
18 dBi
64° (half-power)
7.1° (half-power)
6.8° (half-power)
6.4° (half-power)
0° 4° 8° 10°
18 18 17 17 dB
0° 4° 8° 10°
18 18 17 17 dB
0° 4° 8° 10°
18 18 17 17 dB
Mounting E uipment
Vertical pattern
45°- polarization
0–10° electrical downtilt
138
11272-B
936.3733/d
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–13 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10504V01
Extended Downtilt Range
Mounting Clamps Included
65° Single Band Panel Antenna
Antenna 1
Single Band (MHz)
1710–2200
X
65°
Dual Polarization
HPBW
Adj. Electrical Downtilt
0°–15°
Manual, or optional remote control
2.5 inches
(64 mm)
General specifications
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
1710–2200
–45
7 16
Specifications
Gain
Front-to-back ratio (180° 30°)
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression
first sidelobe above main beam
within 0°–20° sector above horizon
Cross polar ratio
Main direction
0°
Sector
60°
Null-fill at 0° tilt
56.3 inches
(1429 mm)
57.4 inches
(1459 mm)
2.7 inches
(69 mm)
1710–2200
+45
–45o
6.1 inches
(155 mm)
7 16
Profile PF5
1710–1880 MHz
1850–1990 MHz
17.5 dBi
17.6 dBi
25 dB (co-polar)
25 dB (co-polar)
68° (half-power)
66° (half-power)
7.9° (half-power)
7.5° (half-power)
0°–15°
0°–15°
(manual or optional remote control)
0° 5° 10° 15° T
0° 5° 10° 15° T
17 20 18 17 dB
16 20 18 17 dB
16 18 18 16 dB
16 18 17 16 dB
1920–2170 MHz
17.7 dBi
25 dB (co-polar)
64° (half-power)
7.2° (half-power)
0°–15°
2000–2200 MHz
17.8 dBi
25 dB (co-polar)
62° (half-power)
7° (half-power)
0°–15°
0° 5° 10° 15° T
16 20 18 17 dB
15 18 17 16 dB
0° 5° 10° 15° T
15 20 18 15 dB
15 16 16 15 dB
22 dB (typical)
10 dB
21 dB
24 dB (typical)
10 dB
19 dB
26 dB (typical)
10 dB
18 dB
22 dB (typical)
10 dB
20 dB
3
30
0o
20
30
0o
12
0o
0o
Horizontal pattern
45°- polarization
90o
12
0o
0o
24
180o
0o
15
21
0o
24
270o
21
0o
90o
180o
o
60
20
30
270o
0o
15
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
3
10
o
60
30
Mounting E uipment
0o
o
o
0
33
0
33
0o
10
Model
2 x 738 546
+45o
o
Wind load
Front/Side/Rear
54.6 inches
(1387 mm)
30
Dimensions
1710–2200 MHz
1.5:1
50 ohms
IM3: -153 dBc
+45° and -45°
2 x 7-16 DIN female
30 dB
300 watts (at 50°C) per input
1.5 dB
2°
14.3 lb (6.5 kg)
18.7 lb (8.5 kg) clamps included
54.6 x 6.1 x 2.7 inches
(1387 x 155 x 69 mm)
at 93 mph (150kph)
81 lbf / 23 lbf / 84 lbf
(360 N) / (100 N) / (370 N)
M (Medium)
120 mph (200 kph)
65.2 x 6.8 x 3.6 inches
(1655 x 172 x 92 mm)
20.9 lb (9.5 kg)
30
o
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation
Maximum input power
Tracking, average
Squint
Weight
Vertical pattern
45°- polarization
0–15° electrical downtilt
11305-A
936.3927/b
139
742 213V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
1710–2200
X
65°
0°–10°
General specifications
2.5 inches
(64 mm)
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Front-to-back ratio
(180° 30°)
Maximum input power
Electrical downtilt
continuously adjustable
Connector
Isolation
Cross polar ratio
Main direction
0°
Sector
60°
Tracking, average
Squint
Weight
76.9 inches
(1954 mm)
78.6 inches
(1996 mm)
79.8 inches
(2026 mm)
Dimensions
2.8 inches
(70 mm)
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
6.1 inches
(155 mm)
Shipping weight
Specifications
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for first
sidelobe above main beam
10
30
0o
1920–2200 MHz
19.5 dBi
63° (half-power)
4.7° (half-power)
4.5° (half-power)
4.3° (half-power)
0° 2° 4° 6° T
18 18 16 15 dB
0° 2° 4° 6° T
18 18 17 16 dB
0° 2° 4° 6° T
18 18 18 18 dB
30
0o
12
0o
0o
24
o
30
7-16 DIN
90o
12
0o
0o
24
180o
0o
15
0o
15
Horizontal pattern
45°- polarization
270o
21
0o
90o
21
0o
7-16 DIN
30
270o
11271-B
936.3740/b
o
60
20
30
140
1710–2200 1710–2200
-45°
+45°
10
o
60
20
180o
3
25 dB (typical)
10 dB
0.5 dB
2.0°
19.8 lb (9 kg)
24.3 lb (11 kg) clamps included
76.9 x 6.1 x 2.8 inches
(1954 x 155 x 70 mm)
at 93 mph (150kph)
115 lbf / 32 lbf / 115 lbf
(510 N) / (140 N) / (510 N)
M (Medium)
120 mph (200 kph)
88 x 6.8 x 3.6 inches
(2235 x 172 x 92 mm)
28.7 lb (13 kg)
1850–1990 MHz
19.2 dBi
65° (half-power)
0o
o
30
o
0
33
o
0
33
3
2 x 7-16 DIN female
30 dB
1710–1880 MHz
19 dBi
67° (half-power)
Profile PF5
0o
1710–2200 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
30 dB (co-polar)
25 dB (total power)
300 watts per input (at 50°C)
0–6 degrees
Vertical pattern
45°- polarization
0–6° electrical downtilt
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Kit for use with above mounting kits,
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10651
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
1710–2690
X
65°
Dual Polarization
HPBW
Adj. Electrical Downtilt
0°–6°
Manual, or optional remote control
2.5 inches
(64 mm)
General specifications
1710–2690 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
0°–6° (continously adjustable)
(manual or remote control)
30 dB
300 watts (at 50°C) per input
1.5 dB
3°
15.4 lb (7 kg)
19.8 lb (9 kg) clamps included
65.7 x 6.1 x 2.8 inches
(1670 x 155 x 70 mm)
at 93 mph (150kph)
97 lbf / 26 lbf / 99 lbf
(430 N) / (115 N) / (440 N)
M (Medium)
120 mph (200 kph)
76.1 x 6.8 x 3.6 inches
(1934 x 172 x 92 mm)
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Specifications
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Front-to-back ratio
(180° 30°)
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
0°
Sector
60°
65.7 inches
(1670 mm)
–45o
2.8 inches
(70 mm)
+45o
6.1 inches
(155 mm)
1710–1990 MHz
18.5 dBi
67° (half-power)
1920–2170 MHz
19 dBi
63° (half-power)
2170–2490 MHz
19.4 dBi
60° (half-power)
2490–2690 MHz
19.5 dBi
58° (half-power)
5.4° (half-power)
4.9° (half-power)
4.3° (half-power)
4° (half-power)
Profile PF5
28 dB
28 dB
0° 3° 6° T
18 18 17 dB
25 dB (typical)
10 dB
25 dB
0° 3° 6° T
18 18 16 dB
25 dB (typical)
10 dB
25 dB
0° 3° 6° T
18 18 16 dB
25 dB (typical)
10 dB
0° 3° 6° T
18 18 17 dB
28 dB (typical)
10 dB
0o
3
33
0o
33
0o
1710–2690
+45
o
60
20
90o
12
0o
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
o
Horizontal pattern
45°- polarization
270o
90o
12
0o
0o
24
180o
0o
15
Mounting E uipment
0o
15
21
0o
24
180o
60
20
30
0o
7-16
0o
30
270o
7-16
30
21
0o
1710–2690
–45
0o
3
10
10
30
0o
o
Dimensions
67.4 inches
(1712 mm)
30
Isolation, between ports
Maximum input power
Tracking
Squint
Weight
68.6 inches
(1742 mm)
30
o
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Electrical downtilt
Vertical pattern
45°- polarization
0–6° electrical downtilt
Model
2 x 738 546
11377-C
936.4200/b
141
800 10378
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
2.625 inches 0.125
(68 mm 4)
1710–2200
X
65°
0°–6°
General specifications
103.7 inches
(2635 mm)
102.6 inches
(2605 mm)
100.3 inches
(2548 mm)
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation
Maximum input power
Electrical downtilt
continuously adjustable
Tracking, average
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
3.5 inches
(89 mm)
6.1 inches
(155 mm)
Shipping weight
Specifications
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Front-to-back ratio (180° 3°)
Sidelobe suppression for
first sidelobe above main beam
First null-fill at 0° tilt
Cross polar ratio
Main direction
0°
Sector
60°
o
30
3
0o
33
0o
33
0o
10
30
0o
30
0o
0o
2
1850–1990 MHz
21.1 dBi
62° (half-power)
1920–2200 MHz
21.2 dBi
60° (half-power)
3.7° (half-power)
3.5° (half-power)
3.3° (half-power)
30 dB
0° 3° 6°
18 18 17 dB
20 dB
28 dB
0°
3° 6°
18 17 17 dB
20 dB
28 dB
0°
3° 6°
17 17 17 dB
20 dB
25 dB (typical)
10 dB
23 dB (typical)
10 dB
23 dB (typical)
10 dB
1710–2200
–45o
1710–2200
+45o
7-16
7-16
90o
12
o
40
0o
2
o
180o
0o
15
0
15
Horizontal pattern
45°- polarization
270o
21
0o
12
o
40
21
0o
1710–1880 MHz
20.6 dBi
65° (half-power)
30
90o
11026-B
936.3921/a
1.0 dB
2.5°
28.7 lb (13 kg)
33.1 lb (15 kg) clamps included
100.3 x 6.1 x 3.5 inches
(2548 x 155 x 89 mm)
at 93 mph (150kph)
149 lbf / 59 lbf / 165 lbf
(660 N) / (260 N) / (730 N)
M (Medium)
120 mph (200 kph)
116.9 x 6.8 x 4.4 inches
(2970 x 172 x 112 mm)
34.6 lb (15.7 kg)
o
60
20
30
270o
142
3
10
o
60
20
180o
0o
30
o
Profile PF11
1710–2200 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
30 dB
300 watts (at 50°C) per input
0–6 degrees
Vertical pattern
45°- polarization
0–6° electrical downtilt
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10510V01
65°
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
1710–2200
X
65°
1710–2200
X
65°
0°–15°
0°–15°
uad Port Panel Antenna
General specifications
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
30
o
0o
33
0o
33
0o
3
10
30
0o
56.5 inches
(1436 mm)
58.8 inches
(1494 mm)
0o
3
o
60
20
30
30
90o
12
0o
0o
24
Specifications
Gain
Front-to-back ratio
(180° 30°)
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression
first sidelobe above main beam
within 0°–20° sector above horizon
Cross polar ratio
Main direction
0°
Sector
60°
Null-fill at 0° tilt
90o
2.8 inches
(71 mm)
12.7 inches
(323 mm)
3.9 inches
(98 mm)
12
0o
0o
24
180o
0o
15
0o
15
Horizontal pattern
45°- polarization
270o
21
0o
270o
21
0o
54.7 inches
(1389 mm)
10
30
0o
o
60
20
180o
2.625 inches 0.125
(68 mm 4)
1710–2200 MHz
1.5:1
50 ohms
IM3: -153 dBc
+45° and -45°
4 x 7-16 DIN female
30 dB
300 watts (at 50°C) per input
37.5 lb (17 kg)
41.9 lb (19 kg) clamps included
54.7 x 12.7 x 2.8 inches
(1389 x 323 x 71 mm)
at 93 mph (150kph)
158 lbf / 36 lbf / 162 lbf
(700 N) / (160 N) / (720 N)
M (Medium)
120 mph (200 kph)
66.4 x 13.3 x 4.4 inches
(1686 x 337 x 112 mm)
46.3 lb (21 kg)
30
o
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation
Maximum input power
Weight
Profile PF8
Vertical pattern
45°- polarization
0–15° electrical downtilt
1710–1880 MHz
17.5 dBi
30 dB (co-polar)
1850–1990 MHz
17.6 dBi
30 dB (co-polar)
1920–2170 MHz
17.7 dBi
30 dB (co-polar)
2000–2200 MHz
17.8 dBi
28 dB (co-polar)
65° (half-power)
63° (half-power)
7.9° (half-power)
7.5° (half-power)
0°–15°
0°–15°
(manual or optional remote control)
0° 5° 10° 15° T
0° 5° 10° 15° T
17 20 18 17 dB
16 20 18 18 dB
17 18 18 16 dB
16 17 17 16 dB
62° (half-power)
7.2° (half-power)
0°–15°
62° (half-power)
6.9° (half-power)
0°–15°
0° 5° 10° 15° T
15 19 18 17 dB
15 17 17 16 dB
0° 5° 10° 15° T
14 18 18 16 dB
14 16 16 15 dB
24 dB (typical)
9 dB
23 dB
24 dB (typical)
10 dB
21 dB
26 dB (typical)
10 dB
20 dB
24 dB (typical)
9 dB
22 dB
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
–45o –45o
RCU
+45o +45o
1710–2200 Left Right 1710–2200
RCU
Layout of interface
11307-A
936.3986/a
143
800 10622
uad Port Panel Antenna
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
1710–2690
X
65°
1710–2690
X
65°
0°–12°
0°–12°
General specifications
2.625 inches 0.125
(68 mm 4)
59.8 inches
(1520 mm)
58.3 inches
(1480 mm)
55.7 inches
(1415 mm)
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Electrical downtilt
1710–2690 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female
0°–12° (continously adjustable)
(manual or remote control)
30 dB
300 watts (at 50°C) per input
39.7 lb (18 kg)
44.1 lb (20 kg) clamps included
55.7 x 12.7 x 2.8 inches
(1415 x 323 x 71 mm)
at 93 mph (150kph)
162 lbf / 38 lbf / 167 lbf
(720 N) / (165 N) / (740 N)
M (Medium)
120 mph (200 kph)
67.2 x 13.3 x 4.4 inches
(1706 x 337 x 112 mm)
48.5 lb (22 kg)
Isolation, between ports
Maximum input power
Weight
Dimensions
Wind load
Front/Side/Rear
2.8 inches
(71 mm)
Mounting category
Wind survival rating
Shipping dimensions
12.7 inches
(323 mm)
Shipping weight
o
3
0o
30
3
0o
33
0o
33
0o
10
10
30
0o
30
0o
0o
6
20
1710–2690
–45o
270o
90o
12
0o
Profile PF8
0o
24
0o
21
180o
Horizontal pattern
45°- polarization
180o
0o
dBi
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Front-to-back ratio (180° 30°)
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
0°
Sector
60°
7-16
0o
15
Gain
7-16
12
0o
0o
Specifications
7-16
90o
24
15
7-16
270o
0o
1710–2690
+45o
o
30
21
1710–2690
–45o
60
20
30
1710–2690
+45o
30
o
65°
Vertical pattern
45°- polarization
0–12° electrical downtilt
1710–1990 MHz
0°
6° 12° T
17.4 17.4 17.3 dBi
1920–2200 MHz
0°
6° 12° T
17.8 17.6 17.5 dBi
2200–2490 MHz
0°
6° 12° T
18
17.9 17.5 dBi
2490–2690 MHz
0°
6° 12° T
18
17.7 17.3
65° (half-power)
65° (half-power)
61° (half-power)
61° (half-power)
7.1° (half-power)
6.5° (half-power)
5.9° (half-power)
5.7° (half-power)
25 dB, avg 28 dB
0°
6° 12° T
18
18
18 dB
30 dB (typical)
10 dB
26 dB, avg 28 dB
0°
6° 12° T
18
18
18 dB
30 dB (typical)
10 dB
25 dB, avg 27 dB
0°
6° 12° T
18
17
17 dB
25 dB (typical)
8 dB
25 dB, avg 27 dB
0°
6° 12° T
18
18
17 d
25 dB (typical)
10 dB
Mounting E uipment
Model
2 x 738 546
144
11237-B
936.3621/c
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Kit for use with above mounting kit
(optional)
0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
NEW
65°
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
Antenna 1
Antenna 2
1710–2690
X
65°
1710–2690
X
65°
0°–10°
0°–10°
General specifications
1710–2690 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female
0°–10° (continously adjustable)
(manual or remote control)
30 dB
300 watts (at 50°C) per input
37.5 lb (17 kg)
41.9 lb (19 kg) clamps included
65.7 x 12.7 x 2.8 inches
(1668 x 323 x 71 mm)
at 93 mph (150kph)
187 lbf / 72 lbf / 198 lbf
(830 N) / (320 N) / (880 N)
Medium
120 mph (200 kph)
77.2 x 13.3 x 4.4 inches
(1961 x 337 x 112 mm)
Isolation, between ports
Maximum input power
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
30
°
0°
3
33
0°
33
0°
30
0°
60
20
°
30
0°
73.9 inches
(1878 mm)
3
2.8 inches
(71 mm)
°
60
12.7 inches
(323 mm)
3.9 inches
(98 mm)
30
12
0°
0°
24
270°
90°
Specifications
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Front-to-back ratio
(180° 30°)
Sidelobe suppression for:
First sidelobe above main beam
Cross polar ratio
0°
Sector
60°
21
180°
Profile PF8
0°
0°
Horizontal pattern
45°- polarization
0°
15
15
180°
12
0°
24
0°
90°
0°
68.2 inches
(1733 mm)
0°
20
30
270°
21
65.7 inches
(1668 mm)
10
10
uad Port Panel Antenna
2.625 inches 0.125
(68 mm 4)
30
°
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Electrical downtilt
800 10652
Vertical pattern
45°- polarization
0°–10° electrical downtilt
1710–1990 MHz
0° 5° 10° T
18.2 18.4 18 dBi
65° (half-power)
1920–2200 MHz
0° 5° 10° T
18.7 18.9 18.4 dBi
65° (half-power)
2200–2490 MHz
0° 5° 10° T
18.8 19 18.3 dBi
62° (half-power)
2490–2690 MHz
0° 5° 10° T
18.7 19 18.3 dBi
65° (half-power)
5.5° (half-power)
5° (half-power)
4.3° (half-power)
4° (half-power)
30 dB
0° 5° 10° T
18 16 15 dB
22 dB (typical)
10 dB
26 dB
28 dB
0° 5° 10° T
18 16 15 dB
22 dB (typical)
10 dB
0° 5° 10° T
18 16 15 dB
22 dB (typical)
10 dB
26 dB
0° 5° 10° T
18 15 15 dB
20 dB (typical)
10 dB
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
–45o –45o
RCU
+45o +45o
1710–2690 Left Right 1710–2690
RCU
Layout of interface
11347-B
936.4250/a
145
NEW
800 10679
85° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
1710–2690
X
85°
2°–10°
General specifications
54.6 inches
(1388 mm)
1710–2690 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
2°–10° (continously adjustable)
30 dB
300 watts (at 50°C) per input
10.1 lb (4.6 kg)
14.6 lb (6.6 kg) clamps included
54.6 x 6.1 x 2.7 inches
(1388 x 155 x 69 mm)
at 93 mph (150kph)
81 lbf / 23 lbf / 84 lbf
(360 N) / (100 N) / (370 N)
M (Medium)
120 mph (200 kph)
65.2 x 6.8 x 3.6 inches
(1655 x 172 x 92 mm)
56.3 inches
(1430 mm)
Dimensions
Wind load
Front/Side/Rear
57.5 inches
(1460 mm)
Mounting category
Wind survival rating
Shipping dimensions
30
°
0°
3
33
0°
33
0°
30
0°
°
60
20
30
0°
30
90°
12
0°
0°
24
11431-B
936.4535/b
1710–2690
+45o
7-16
7-16
21
0°
21
180°
0°
146
1710–2690
–45o
0°
15
1710–1990 MHz
Gain
16.4 dBi
+45° and -45° polarization
83° (half-power)
horizontal beamwidth
+45° and -45° polarization
6.9° (half-power)
vertical beamwidth
Front-to-back ratio (co-polar)
25 dB
2° 6° 10° T
Sidelobe suppression for
first sidelobe above main beam
17 18 18 dB
Cross polar ratio
0°
24 dB (typical)
Sector
60°
12 dB
12
0°
24
0°
Specifications
90°
15
Horizontal pattern
45°- polarization
Profile PF5
270°
0°
270°
180°
°
60
20
30
6.1 inches
(155 mm)
3
10
10
2.7 inches
(69 mm)
0°
°
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Electrical downtilt
Isolation, between ports
Maximum input power
Weight
30
2.5 inches
(68 mm)
Vertical pattern
45°- polarization
0°–10° electrical downtilt
1920–2200 MHz
16.6 dBi
84° (half-power)
2200–2490 MHz
17 dBi
85° (half-power)
2490–2690 MHz
17.2 dBi
83° (half-power)
6.5° (half-power)
6.1° (half-power)
5.5° (half-power)
24 dB
2° 6° 10° T
18 18 17 dB
25 dB (typical)
12 dB
23 dB
2° 6° 10° T
17 17 17 dB
22 dB (typical)
10 dB
22 dB
2° 6° 10° T
18 18 18 dB
22 dB (typical)
10 dB
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
0–15 degrees downtilt angle
Reference the Mechanical Accessories section.
741 990V01
88° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Adj. Electrical Downtilt
Manual, or optional remote control
1710–2170
X
88°
0°–6°
General specifications
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Front-to-back ratio
Maximum input power
Electrical downtilt
continuously adjustable
Connector
Isolation
Cross polar ratio
Main direction
0°
Sector
60°
Tracking
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
1710–2170 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
25 dB (co-polar)
25 dB (total power)
300 watts per input (at 50°C)
0–6 degrees
(manual or optional remote control)
2 x 7-16 DIN female
30 dB
20 dB (typical)
10 dB
0.5 dB
2.5°
24.3 lb (11 kg)
28.7 lb (13.kg) clamps included
76.5 x 6.1 x 2.7 inches (1942 x 155 x 69 mm)
at 93 mph (150kph)
115 lbf / 42 lbf / 138 lbf
(510 N) / (185 N) / (610 N)
M (Medium)
120 mph (200 kph)
87.2 x 6.8 x 3.6 inches (2214 x 172 x 92 mm)
30.9 lb (14 kg)
2.5 inches
(68 mm 4)
76.5 inches
(1942 mm)
78.6 inches
(1996 mm)
79.8 inches
(2026 mm)
2.7 inches
(69 mm)
6.1 inches
(155 mm)
Horizontal pattern
45°- polarization
Specifications
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for first
sidelobe above main beam
Vertical pattern
45°- polarization
0–6° electrical downtilt
1710–1880 MHz
17.7 dBi
88° (half-power)
1850–1990 MHz
18 dBi
88° (half-power)
1920–2170 MHz
18.2 dBi
88° (half-power)
4.9° (half-power)
4.7° (half-power)
4.5° (half-power)
0° 2° 4° 6° T
17 17 17 17 dB
0° 2° 4° 6° T
18 18 18 18 dB
0° 2° 4° 6° T
18 18 18 18dB
Profile PF5
Mounting E uipment
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
1710–2170 1710–2170
-45°
+45°
7-16 DIN
7-16 DIN
11284-A
936.3926/a
147
742 237
uad Port Panel Antenna
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
1710–2170
X
65°
1710–2170
X
65°
0°–8°
0°–8°
Adj. Electrical Downtilt
Manual, or optional remote control
2.625 inches 0.125
(68 mm 4)
45.2 inches
(1147 mm)
47.7 inches
(1212 mm)
53.4 inches
(1357 mm)
General specifications
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Front-to-back ratio
Maximum input power
Electrical downtilt
continuously adjustable
Connector
Isolation
Cross polar ratio
Main direction
0°
Sector
60°
Weight
1710–2170 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
30 dB (co-polar)
250 watts per input (at 50°C)
0–8 degrees
(manual or optional remote control)
4 x 7-16 DIN female
30 dB
25 dB (typical)
10 dB
27.6 lb (12.5 kg)
32 lb (14.5 kg) clamps included
45.2 x 12.7 x 2.8 inches
(1147 x 323 x 71 mm)
at 93 mph (150kph)
133 lbf / 31 lbf / 138 lbf
(590 N) / (135 N) / (610 N)
M (Medium)
120 mph (200 kph)
56.9 x 13.3 x 4.1 inches
(1446 x 337 x 104 mm)
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
o
30
0o
0o
3
33
0o
33
2.8 inches
(71 mm)
3.9 inches
(98 mm)
12.7 inches
(323 mm)
0o
0o
6
20
12
0o
90o
0o
o
21
0
180o
0o
15
o
12
0o
24
0o
21
0
o
60
20
270o
15
180o
Horizontal pattern
45°- polarization
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for first
sidelobe above main beam
0o
30
90o
24
Specifications
30
30
270o
0o
Profile PF8
3
10
10
30
0o
30
o
65°
Vertical pattern
45°- polarization
0–8° electrical downtilt
1710–1880 MHz
17.5 dBi
65° (half-power)
1850–1990 MHz
17.7 dBi
63° (half-power)
1920–2170 MHz
18 dBi
61° (half-power)
8.3° (half-power)
8° (half-power)
7.5° (half-power)
0° 4° 8° T
20 20 18 dB
0° 4° 8° T
20 20 18 dB
0° 4° 8° T
20 20 18 dB
Mounting E uipment
–45o –45o
RCU
RCU
+45o +45o
1710–2170 Left Right 1710–2170
Layout of interface
148
11293-C
936.4021/d
Model
tion
2 x 738 546
Descrip-
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–18 degrees downtilt angle.
Reference the Mechanical Accessories section.
742 236V01
65°
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
1710–2200
X
65°
1710–2200
X
65°
0°–10°
0°–10°
Adj. Electrical Downtilt
Manual, or optional remote control
General specifications
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Front-to-back ratio
Mounting category
Wind survival rating
Shipping dimensions
o
o
o
o
o
o
o
o
3.9 inches
(98 mm)
o
o
o
o
o
o
o
o
o
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression for first
sidelobe above main beam
o
Vertical pattern
45°- polarization
0–10° electrical downtilt
Horizontal pattern
45°- polarization
Specifications
12.7 inches
(323 mm)
Profile PF8
o
o
o
2.8 inches
(71 mm)
o
o
54.5 inches
(1384 mm)
o
Wind load
Front/Side/Rear
51.9 inches
(1319 mm)
60.2 inches
(1529 mm)
25 dB (typical)
10 dB
33.1 lb (15 kg)
37.5 lb (17 kg) clamps included
51.9 x 12.7 x 2.8 inches
(1319 x 323 x 71 mm)
at 93 mph (150kph)
149 lbf / 35 lbf / 156 lbf
(660 N) / (155 N) / (690 N)
M (Medium)
120 mph (200 kph)
62 x 14.2 x 5.1 inches
(1574 x 360 x 130 mm)
Dimensions
2.625 inches 0.125
(68 mm 4)
1710–2200 MHz
50 ohms
1.5:1
IM3: -150 dBc
+45° and -45°
30 dB (co-polar)
25 dB (total power)
300 watts per input (at 50°C)
0–10 degrees
(manual or optional remote control)
4 x 7-16 DIN female
30 dB
Maximum input power
Electrical downtilt
continuously adjustable
Connector
Isolation
Cross polar ratio
Main direction
0°
Sector
60°
Weight
uad Port Panel Antenna
1710–1880 MHz
17.6 dBi
64° (half-power)
1850–1990 MHz
17.8 dBi
64° (half-power)
1920–2200 MHz
18 dBi
62° (half-power)
7° (half-power)
6.8° (half-power)
6.5° (half-power)
0° 5° 10° T
20 18 16 dB
0° 5° 10° T
20 18 16 dB
0° 5° 10° T
16 18 16 dB
Mounting E uipment
Model
tion
2 x 738 546
Descrip-
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
–45o –45o
RCU
+45o +45o
1710–2200 Left Right 1710–2200
RCU
Layout of interface
11273-B
936.3781/a
149
742 235V01
65°
uad Port Panel Antenna
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
1710–2170
X
65°
1710–2170
X
65°
0°–6°
0°–6°
Adj. Electrical Downtilt
Manual, or optional remote control
General specifications
2.625 inches 0.125
(68 mm 4)
85.4 inches
(2169 mm)
79.7 inches
(2024 mm)
77.1 inches
(1959 mm)
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation
Maximum input power
Tracking, average
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
no no
2#5
o o
n,EFT 2IGHTn
3.9 inches
(98 mm)
12.7 inches
(323 mm)
2#5
2.8 inches
(71 mm)
,AYOUTOFINTERFACE
Specifications
Gain
Front-to-back ratio
Horizontal beamwidth
Vertical beamwidth
Electrical downtilt
continuously adjustable
Vertical Pattern – Sidelobe
suppression for first
sidelobe above main beam
Cross polar ratio
Main direction
0°
Sector
60°
o
o
o
o
o
0° 2° 4° 6° T
17 17 15 15 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
25 dB (typical)
10 dB
1920–2170 MHz
19.5 dBi
30 dB (co-polar)
24 dB (total power)
63° (half-power)
4.2° (half-power)
0°–6°
o
1710–1880 MHz
1850–1990 MHz
19 dBi
19.2 dBi
30 dB (co-polar)
30 dB (co-polar)
25 dB (total power)
25 dB (total power)
65° (half-power)
64° (half-power)
4.6° (half-power)
4.4° (half-power)
0°–6°
0°–6°
(manual or optional remote control)
0° 2° 4° 6° T
0° 2° 4° 6° T
17 17 14 14 dB
17 17 15 15 dB
o
Profile PF8
1710–2170 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
4 x 7-16 DIN female
30 dB
300 watts (at 50°C) per input
0.5 dB
2.5°
39.7 lb (18 kg)
44.1 lb (20 kg) clamps included
77.1 x 12.7 x 2.8 inches
(1959 x 323 x 71 mm)
at 93 mph (150kph)
228 lbf / 50 lbf / 234 lbf
(1010 N) / (220 N) / (1040 N)
M (Medium)
120 mph (200 kph)
93.9 x 14.2 x 5.1 inches
(2384 x 360 x 130 mm)
48.5 lb (22 kg)
o
o
o
o
o
o
o
Mounting E uipment
o
o
150
11292-B
936.3993/a
o
o
o
o
o
Horizontal pattern
45°- polarization
o
o
o
Vertical pattern
45°- polarization
0–6° electrical downtilt
Model
2 x 738 546
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
742 352V01
90°
Mounting Clamps Included
uad Port (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
1710–2180
X
90°
1710–2180
X
90°
0°–10°
0°–10°
Adj. Electrical Downtilt
Manual, or optional remote control
uad Port Panel Antenna
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Front-to-back ratio
Maximum input power
Electrical downtilt
continuously adjustable
Connector
Isolation intrasystem
intersystem
Tracking
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
1710–2180 MHz
1.5:1
50 ohms
IM3: -150dBc
+45° and -45°
24 dB (co-polar)
24 dB (total power)
300 watts per input (at 50°C)
0–10 degrees
4 x 7-16 DIN female
30 dB
30 dB
0.5 dB
2.5°
37.5 lb (17 kg)
41.9 lb (19 kg) clamps included
51.9 x 12.7 x 2.8 inches
(1319 x 323 x 71 mm)
at 93 mph (150kph)
149 lbf / 35 lbf / 156 lbf
(660 N) / (155 N) / (690 N)
M (Medium)
120 mph (200 kph)
62 x 14.2 x 5.1 inches
(1574 x 360 x 130 mm)
43 lb (19.5 kg)
2.625 inches 0.125
(68 mm 4)
51.9 inches
(1319 mm)
54.5 inches
(1384 mm)
60.2 inches
(1529 mm)
2.8 inches
(71 mm)
3.9 inches
(98 mm)
12.7 inches
(323 mm)
no no
2#5
o o
n,EFT 2IGHTn
2#5
,AYOUTOFINTERFACE
Profile PF8
3
30
o
0o
33
0o
10
1920–2180 MHz
0°
5° 10° T
16.5 16.7 16.2
88° (half-power)
7° (half-power)
6.5° (half-power)
0°–10°
0°–10°
0° 4° 8° 10° T
18 17 16 15 dB
0° 4° 8° 10° T
17 17 16 15 dB
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
15
180o
Horizontal pattern
45°- polarization
0o
3
30
o
0o
33
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization 7.4° (half-power)
vertical beamwidth
Electrical downtilt
0°–10°
continuously adjustable
(manual or optional remote control)
Vertical Pattern – Sidelobe 0° 4° 8° 10° T
suppression for first
18 17 16 15 dB
sidelobe above main beam
Cross polar ratio (typical)
Main direction
0°
15 dB
Sector
60°
8 dB
1850–1990 MHz
0°
5° 10° T
16.2 16.4 16.1
90° (half-power)
0o
Average gain (dBi)
1710–1880 MHz
0°
5° 10° T
16.1 16.3 16
88° (half-power)
21
Specifications
10
30
0o
o
60
20
30
15 dB
7.5 dB
15 dB
7 dB
o
90o
12
0o
0o
21
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
180o
0o
15
Model
2 x 738 546
0o
24
Mounting E uipment
Vertical pattern
45°- polarization
0°–10° electrical downtilt
11281-B
936.3948/a
151
NEW
800 10711
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
1710–2170
X
65°
0°
Dual Polarization
HPBW
Electrical Downtilt
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation, between ports
Maximum input power
Wind load
Front/Side/Rear
2.5 inches
(68 mm)
Profile PF5
9.4 inches
(239 mm)
6.1 inches
(155 mm)
8.2 inches
(209 mm)
Mounting category
Weight
Dimensions
Wind survival rating
Shipping dimensions
2.7 inches
(69 mm)
°
0°
30
3
10
30
0°
30
0°
7 16
°
60
30
12
0°
0°
24
90°
12
0°
0°
24
180°
0°
15
0°
15
180°
Horizontal pattern
45°- polarization
270°
0°
90°
21
270°
21
0°
3
20
30
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Front-to-back ratio (co-polar)
Cross polar ratio
0°
Sector corner
60°
7 16
10
°
60
20
Specifications
1710–2690
+45
0°
33
0°
33
0°
1710–2690
–45
30
°
6.1 inches
(155 mm)
1710–2690 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
28 dB
150 watts (at 50°C) per input
at 93 mph (150kph)
12 lbf / 3 lbf / 13 lbf
(50 N) / (13 N) / (55 N)
L (Light)
3.3 lb (1.5 kg)
6.1 x 6.1 x 2.7 inches
(155 x 155 x 69 mm)
120 mph (200 kph)
10.4 x 6.8 x 3.6 inches
(257 x 172 x 92 mm)
Vertical pattern
45°- polarization
1710–1990 MHz
8.7 dBi
67° (half-power)
1920–2200 MHz
9.2 dBi
62° (half-power)
2200–2490 MHz
9.6 dBi
55° (half-power)
2490–2690 MHz
9.8 dBi
53° (half-power)
66° (half-power)
60° (half-power)
55° (half-power)
53° (half-power)
24 dB
25 dB (typical)
10 dB
24 dB
20 dB (typical)
9 dB
22 dB
23 dB (typical)
8 dB
22 dB
25 dB (typical)
8 dB
Mounting E uipment
Model
734 365
152
11430-A
936.4462
Description
Mounting Kit for 1.8 to 4.9 inch
(45 to 125 mm) OD mast.
2 x 738 546
Mounting Kit for 2 to 4.6 inch
optional
(50 to 115 mm) OD mast.
Reference the Mechanical Accessories section.
NEW
800 10761
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
1710–2690
X
65°
3°
Dual Polarization
HPBW
Electrical Downtilt
2.5 inches
(64 mm)
General specifications
1710–2690 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
28 dB
150 watts (at 50°C) per input
4 lb (1.8 kg)
10.9 x 6.1 x 2.7 inches
(278 x 154 x 69 mm)
at 93 mph (150kph)
17 lbf / 4 lbf / 17 lbf
(75 N) / (17 N) / (75 N)
L (Light)
120 mph (200 kph)
14.8 x 6.8 x 3.6 inches
(375 x 172 x 62 mm)
4.2 lb (1.9 kg)
2.7 inches
(69 mm)
6.1 inches
(154 mm)
0°
0°
0°
15
0°
Horizontal pattern
45°-polarization
180°
Vertical pattern
45°-polarization
4° electrical downtilt
1710–1990 MHz
11 dBi
67° (half-power)
1920–2200 MHz
11.5 dBi
65° (half-power)
2200–2490 MHz
12.2 dBi
60° (half-power)
2490–2690 MHz
12.7 dBi
58° (half-power)
36° (half-power)
31° (half-power)
25° (half-power)
25° (half-power)
3 degrees
30 dB
3 degrees
28 dB
4 degrees
28 dB
4 degrees
27 dB
20 dB (typical)
8 dB
20 dB (typical)
8 dB
Mounting E uipment
Model
734 365
180°
12
0°
24
0°
180°
90°
15
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
Front-to-back ratio
(180° 30°)
Cross polar ratio
Main direction
0°
Sector
60°
0°
24
Vertical pattern
45°-polarization
3° electrical downtilt
°
60
20
270°
12
0°
0°
0°
Specifications
12
0°
24
90°
15
0°
15
Horizontal pattern
45°-polarization
0°
30
270°
21
0°
0°
12
0°
24
90°
3
10
30
°
60
20
30
270°
21
90°
0°
30
°
60
30
270°
0°
10
20
30
21
30
°
30
°
0°
3
0°
30
0°
33
°
60
20
180°
0°
0°
0°
3
10
10
30
2200–2690 MHz
0°
33
33
0°
33
3
°
1710–2200 MHz
0°
30
Shipping weight
Profile PF10
10.9 inches
(278 mm)
0°
Mounting category
Wind survival rating
Shipping dimensions
12.7 inches
(322 mm)
21
Wind load
Front/Side/Rear
13.9 inches
(352 mm)
30
°
requency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation, between ports
Maximum input power
Weight
Dimensions
Description
Mounting Kit for 1.8 to 4.9 inch
(45 to 125 mm) OD mast.
2 x 738 546
Mounting Kit for 2 to 4.6 inch
optional
(50 to 115 mm) OD mast.
Reference the Mechanical Accessories section.
20 dB (typical)
8 dB
20 dB (typical)
8 dB
1710–2690
–45
1710–2690
+45
7 16
7 16
11413-B
936.4340/a
153
742 196V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
1710–2170
X
65°
0°
General specifications
28.9 inches
(735 mm)
31.1 inches
(789 mm)
32.2 inches
(819 mm)
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
0o
o
3
0o
33
0o
0o
33
2.7 inches
(69 mm)
25 dB (typical)
10 dB
0.5 dB
1.5°
9.9 lb (4.5 kg)
28.9 x 6.1 x 2.7 inches
(735 x 155 x 69 mm)
at 93 mph (150kph)
42 lbf / 15 lbf / 50 lbf
(185 N) / (65 N) / (220 N)
L (Light)
120 mph (200 kph)
39.4 x 6.8 x 3.7 inches
(1000 x 172 x 95 mm)
30
Profile PF5
1710–2170 MHz
50 ohms
1.4:1
IM3: -150 dBc
+45° and -45°
300 watts per input (at 50°C)
2 x 7-16 DIN female
30 dB
10
30
0o
10
30
0o
0o
6
20
o
60
20
30
30
270o
90o
270o
90o
o
0o
0o
21
Specifications
1710–1880 MHz
Gain
15.3 dBi
Front-to-back ratio
30 dB (co-polar)
(180° 30°)
25 dB (total power)
+45° and -45° polarization 67° (half-power)
horizontal beamwidth
+45° and -45° polarization 12.6° (half-power)
vertical beamwidth
Sidelobe suppression for
14 dB
first sidelobe above horizon
180o
0o
Horizontal pattern
45°- polarization
o
15
180o
0o
15
6.1 inches
(155 mm)
12
0
0o
24
0o
12
0o
24
21
no
3
o
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Maximum input power
Connector
Isolation
Cross polar ratio
Main direction
0°
Sector
60°
Tracking, average
Squint
Weight
Dimensions
30
2.5 inches
(64 mm)
Vertical pattern
45°- polarization
1850–1990 MHz
15.6 dBi
30 dB (co-polar)
25 dB (total power)
66° (half-power)
1920–2170 MHz
15.8 dBi
30 dB (co-polar)
25 dB (total power)
64° (half-power)
11.8° (half-power)
11° (half-power)
16 dB
14 dB
Mounting E uipment
154
11287-A
936.3968/a
1710-2170
-45°
1710-2170
+45°
7-16
7-16
Model
734 365
Description
Mounting Kit for 2 to 5.7 inch
(50 to 145 mm) OD mast.
2 x 738 546
Mounting Kit for 2 to 4.6 inch
(optional)
(50 to 115 mm) OD mast.
850 10013
Tilt Kit for use with above mounting kit
(optional)
0–50 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10425V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
1710–2200
X
65°
0°
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation
Maximum input power
Tracking, average
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
2.5 inches
(64 mm)
1710–2200 MHz
1.4:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
30 dB
300 watts (at 50°C) per input
0.5 dB
1.5°
15.4 lb (7 kg)
19.8 lb (9 kg) clamps included
51.3 x 6.1 x 2.7 inches
(1302 x 155 x 69 mm)
at 93 mph (150kph)
75 lbf / 26 lbf / 88 lbf
(330 N) / (115 N) / (390 N)
M (Medium)
120 mph (200 kph)
56.9 x 6.8 x 3.6 inches
(1445 x 172 x 92 mm)
22.5 lb (10.2 kg)
54.6 inches
(1386 mm)
53.4 inches
(1356 mm)
51.3 inches
(1302 mm)
–45o
1710–2200
–45o
1710–2200
+45o
7-16
7-16
+45o
2.7 inches
(69 mm)
6.1 inches
(155 mm)
Profile PF5
o
3
30
0o
33
0o
10
30
0o
1920–2200 MHz
18.3 dBi
64° (half-power)
6.2° (half-power)
5.8° (half-power)
o
60
20
30
270o
90o
12
0o
0o
24
3
10
0o
20 dB (typical)
10 dB
0o
o
25 dB (typical)
30
20 dB (typical)
10 dB
180o
Horizontal pattern
45°- polarization
o
25 dB (typical)
30 dB (co-polar)
16 dB
0o
15
30 dB (co-polar)
15 dB
0
33
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization 6.6° (half-power)
vertical beamwidth
Front-to-back ratio
30 dB (co-polar)
Sidelobe suppression for
14 dB
first sidelobe above main beam
First null-fill
25 dB (typical)
below main beam
Cross polar ratio
Main direction
0°
20 dB (typical)
Sector
60°
10 dB
1850–1990 MHz
18.1 dBi
66° (half-power)
30
1710–1880 MHz
17.9 dBi
67° (half-power)
21
0o
Specifications
60
20
270o
90o
12
0o
0o
Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
180o
0o
15
Model
2 x 738 546
21
0o
24
Mounting E uipment
o
30
Vertical pattern
45°- polarization
11269-A
936.3818/a
155
800 10439V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
2.625 inches 0.125
(68 mm 4)
1710–2200
X
65°
0°
General specifications
89.6 inches
(2276 mm)
88.4 inches
(2246 mm)
85.5 inches
(2172 mm)
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Isolation, between ports
Maximum input power
Sidelobe suppression for
first sidelobe above main beam
0° –30° sector above horizon
First null-fill below main beam
Tracking, average
Squint
Weight
1710–2200 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x 7-16 DIN female
30 dB
300 watts (at 50°C) per input
15 dB
15 dB
20 dB
0.5 dB
1.0°
25.4 lb (11.5 kg)
29.8 lb (13.5 kg) clamps included
85.5 x 6.1 x 3.5 inches
(2172 x 155 x 89 mm)
at 93 mph (150kph)
124 lbf / 48 lbf / 138 lbf
(550 N) / (210 N) / (610 N)
M (Medium)
120 mph (200 kph)
92.1 x 6.8 x 4.8 inches
(2340 x 172 x 122 mm)
34.2 lb (15.5 kg)
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
3.5 inches
(89 mm)
6.1 inches
(155 mm)
Shipping weight
Specifications
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Front-to-back ratio
(180° 30°)
Cross polar ratio
Main direction
0°
Sector
60°
30
o
3
0o
33
0o
33
0o
o
60
20
30
0o
3.7° (half-power)
3.5° (half-power)
30 dB
30 dB
30 dB
30 dB
25 dB
12 dB
23 dB
12 dB
23 dB
10 dB
23 dB
10 dB
0o
3
o
60
1710–2200
–45o
1710–2200
+45o
7-16
7-16
Horizontal pattern
45°- polarization
90o
12
0o
0o
24
180o
0o
15
0o
15
21
0o
4° (half-power)
270o
21
0o
12
0o
11270-A
936.3815/a
4.2° (half-power)
30
90o
0o
24
156
2000–2200 MHz
21.2 dBi
58° (half-power)
20
30
270o
180o
1920–2170 MHz
21.1 dBi
60° (half-power)
10
10
30
0o
1850–1990 MHz
20.8 dBi
63° (half-power)
30
o
Profile PF9
1710–1880 MHz
20.5 dBi
66° (half-power)
Vertical pattern
45°- polarization
Mounting E uipment
Model
tion
2 x 738 546
Descrip-
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
850 10013
Tilt Mount Kit
(optional)
0–9 degrees downtilt angle.
Reference the Mechanical Accessories section.
741 984V01
65° Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
1710–2170
X
88°
0°
2.5 inches
(64 mm)
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Front-to-back ratio
(180° 30°)
Connector
Isolation
Maximum input power
Tracking
Squint
Weight
Dimensions
Wind load
Front/Side/Rear
Mounting category
Wind survival rating
Shipping dimensions
Shipping weight
1710–2170 MHz
1.4:1
50 ohms
IM3: -150 dBc
+45° and -45°
23 dB (co-polar)
23 dB (total power)
2 x 7-16 DIN female
30 dB
150 watts (at 50°C) per input
0.5 dB
3°
4.4 lb (2 kg)
13.5 x 6.1 x 2.7 inches
(342 x 155 x 69 mm)
at 93 mph (150kph)
21 lbf / 7 lbf / 24 lbf
(90 N) / (27 N) / (105 N)
L (Light)
120 mph (200 kph)
17.5 x 6.8 x 3.6 inches
(444 x 172 x 92 mm)
6.6 lb (3 kg)
16.8 inches
(426 mm)
15.6 inches
(396 mm)
13.5 inches
(342 mm)
Profile PF5
2.7 inches
(69 mm)
6.1 inches
(155 mm)
0o
0o
3
o
1710–2170
+45o
30
33
1710–2170
–45o
10
30
0o
o
60
20
30
7-16
270o
7-16
90o
12
0o
0o
21
0
180o
Horizontal pattern
45°- polarization
1920–2170 MHz
11.6 dBi
88° (half-power)
0o
3
30
o
1850–1990 MHz
11.5 dBi
87° (half-power)
0o
33
10
28° (half-power)
26° (half-power)
26° (half-power)
30
0o
o
60
20
30
270o
20 dB
20 dB
90o
20 dB
12
0o
0o
24
20 dB (typical)
18 dB
25 dB (typical)
18 dB
20 dB (typical)
15 dB
180o
0o
15
Gain
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Sidelobe suppression
vertical sector 45°
Cross polar ratio
Main direction
0°
Sector
60°
1710–1880 MHz
11.3 dBi
86° (half-power)
21
0o
Specifications
0o
15
o
24
Vertical pattern
45°- polarization
Mounting E uipment
Model
734 365
Description
Mounting Kit for 1.8 to 4.9 inch
(45 to 125 mm) OD mast.
Reference the Mechanical Accessories section.
11282-A
936.3938/a
157
800 10368
13° Single Band Panel Antenna
Antenna 1
Single Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
1710–2180
V
13°
0°
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Front-to-back ratio
(180° 30°)
Maximum input power
Connector
Weight
Dimensions
Wind load
Front/Side/Rear
Wind survival rating
Shipping dimensions
1710–2180 MHz
1.5:1
50 ohms
IM3: -150dBc
Vertical
30 dB (co-polar)
300 watts per input (at 50°C)
7-16 DIN female
19.8 lb (9 kg)
29.3 x 11.8 x 3 inches
(743 x 299 x 69 mm)
at 93 mph (150kph)
77 lbf / 6 lbf / 90 lbf
(340 N) 6 (25 N) / (400 N)
120 mph (200 kph)
33.5 x 17.4 x 4.9 inches
(852 x 442 x 124 mm)
3
30
n
0n
33
0n
10
30
0n
n
60
20
30
270n
90n
12
0n
180n
0n
15
21
0n
0n
24
H-plane
Horizontal pattern
V- polarization
1710–1880 MHz
Average gain
18.1 dBi
H-plane beamwidth
13.3° (half-power)
Sidelobe suppression
18 dB
horizontal pattern
E-plane beamwidth
37° (half-power)
Sidelobe suppression for 18 dB
first sidelobe above main beam
30
n
0n
33
3 inches
(77 mm)
0n
3
Specifications
1850–1990 MHz
18.4 dBi
12.8° (half-power)
18 dB
1920–2180 MHz
18.7 dBi
12° (half-power)
17 dB
36° (half-power)
18 dB
36° (half-power)
18 dB
29.3 inches
(743 mm)
10
30
0n
n
60
20
30
270n
90n
12
0n
180n
0n
15
21
0n
0n
24
11.8 inches
(299 mm)
E-plane
Vertical pattern
V- polarization
Mounting E uipment
158
10908-B
936.2945/c
Model
Description
2 X 738 546
Mounting Kit for 2 to 4.6 inch
(optional)
(50 to 115 mm) OD mast.
Reference the Mechanical Accessories section.
800 10375
Trisector Antenna
Hex Port (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
Antenna 3
1710–2170
X
65°
1710–2170
X
65°
1710–2170
X
65°
0°–12°
0°–12°
0°–12°
Adj. Electrical Downtilt
Manual, or optional remote control
9.1 inches
(230 mm)
General specifications
1710–2170 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
27 dB (co-polar)
3 x 2 x 7/16 DIN female
250 watts (at 50°C) per input
70.5 lb (32 kg)
48.9 inches (1241 mm)
9.1 inches (230 mm)
at 93 mph (150kph)
47 lbf (205 N)
120 mph (200 kph)
45–47 Hz
0.032
54.9 x 12.4 x 13 inches
(1395 x 315 x 330 mm)
o
30
0o
3
33
0o
33
0o
10
30
0o
31.6 inches
(803 mm)
17.2 inches
(438 mm)
11 inches
(280 mm)
Service Area
(cover removed)
0o
30
o
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Front-to-back ratio
Connector
Maximum input power
Weight
Height
Radome diameter
Wind load
Side
Wind survival rating
Natural frequency
Damping ratio
Shipping dimensions
3
10
60
20
o
30
0o
o
60
20
30
no
30
270o
90o
270o
o
90o
n
0o
21
Specifications
Gain (dBi)
Tilt
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above horizon
dB
Cross polar ratio
Main direction
0°
Sector
60°
Isolation intrasystem
intersystem
180o
n
Vertical pattern
45°- polarization
0°–12° electrical downtilt
1710–1880 MHz
15.4 15.2 15
0°
4°
8°
67° (half-power)
14.8
12°
12.7° (half-power)
no
o
1850–1990 MHz
15.5 15.4 15.3
0°
4°
8°
65° (half-power)
14.9
12°
12° (half-power)
0°–12°
0°–12°
(manual or optional remote control)
0°
4°
8°
12°
0°
4°
16
16
15
15 dB
18
17
20 dB (typical)
10 dB (typical)
30 dB
40 dB
o
0o
Horizontal pattern
45°- polarization
0o
15
0o
15
180o
12
0o
24
0o
0o
21
12
0o
24
no
n
o
o
1920–2170 MHz
15.7 15.6 15.4 14.9
0°
4°
8°
12°
62° (half-power)
11.2° (half-power)
0°–12°
8°
17
20 dB (typical)
10 dB (typical)
30 dB
40 dB
12°
16 dB
0°
18
4°
18
8°
16
12°
16
20 dB (typical)
10 dB (typical)
30 dB
40 dB
Mounting Information
Description
Flange connection 12 x 12M at a graduated diameter of
208 mm, 0°–360° continuously adjustable.
10945-C
936.2830/a
159
800 10360
Trisector Antenna
Dual Band (MHz)
Dual Polarization
HPBW
Antenna 1
Antenna 2
Antenna 3
1710–2170
X
65°
1710–2170
X
65°
1710–2170
X
65°
0°–10°
0°–10°
0°–10°
Adj. Electrical Downtilt
Manual, or optional remote control
General specifications
9.1 inches
(230 mm)
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Front-to-back ratio
(180° 30°)
Connector
Maximum input power
53.7 inches
(1365 mm)
1710–2170 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
30 dB (co-polar)
25 dB (total power)
3 x 2 x 7-16 DIN female
300 watts (at 50°C)
per input
123.5 lb (56 kg)
71.8 inches (1823 mm)
9.1 inches (230 mm)
at 93 mph (150kph)
72 lbf (320 N)
120 mph (200 kph)
19–21 Hz
0.032
79.9 x 15.7 x 15.7 inches
(2030 x 400 x 400 mm)
Weight
Height
Radome diameter
Wind load
Side
Wind survival rating
Natural frequency
Damping ratio
Shipping dimensions
17.2 inches
(438 mm)
o
0n
3
10
30
0n
n
n
12
0n
0n
24
Average gain (dBi)
Tilt
+45° and -45° polarization
horizontal beamwidth
+45° and -45° polarization
vertical beamwidth
Electrical downtilt
continuously adjustable
Sidelobe suppression for
first sidelobe above horizon
Cross polar ratio
Main direction
0°
Sector
60°
Isolation intrasystem
intersystem
12
0n
0n
24
180n
180n
0n
15
Horizontal pattern
45°- polarization
Specifications
90n
o
0n
15
o
270n
21
0n
no
o
90n
21
0n
n
no
n
60
20
30
270n
o
3
10
30
0n
n
60
20
30
0n
30
n
o
0n
33
Service Area
(cover removed)
0n
33
no
11 inches
(280 mm)
30
n
Vertical pattern
45°- polarization
0°–10° electrical downtilt
1710–1880 MHz
17.2 17.5 17.2
0°
5°
10°
66° (half-power)
1850–1990 MHz
17.6 17.8 17.6
0°
5°
10°
63° (half-power)
1920–2170 MHz
17.8 17.9
17.4
0°
5°
10°
60° (half-power)
7° (half-power)
6.7° (half-power)
6.4 ° (half-power)
0°–10°
0°–10°
(manual or optional remote control)
0° 5° 10° T
0° 5° 10° T
17 15 15 dB
17 17 15 dB
0°–10°
25 dB (typical)
10 dB (typical)
30 dB
45 dB
20 dB (typical)
10 dB (typical)
30 dB
42 dB
20 dB (typical)
10 dB (typical)
30 dB
42 dB
0°
17
5°
17
10° T
15 dB
Mounting Information
Description
Flange connection 12 x 12M at a graduated diameter of 208 mm, 0°–360° continuously adjustable.
160
10895-C
936.2761/a
850 10010
Flexible Sealing Frame for Trisector Antenna
Specifications
Outer diameter
Cable diameter (6x)
Cable diameter (3x)
Frame material
Sealing material
180 mm
15–42 mm
3.5–10.5 mm
Stainless steel
Halogen-free cross linkable compound on
ethylene-propylene rubber (EPDM)
Stainless steel
Mounting lubricant
6 mm socket wrench
4 lb (1.8 kg)
8.2 x 8.2 x 2.7 inches
(208 x 208 x 68 mm)
Fasteners
Accessories
Required assembly tools
Weight
Shipping dimensions
110
25
Ø 180
Ø 170
91
51
5
25
30
38
Demanded dimensions of the installation interface:
… 183 +2+0
12
… 172 +1+0
10826-C
936.2607/a
161
850 10010
Flexible Sealing Frame for Trisector Antenna
Mounting instruction:
Gap 0.1 – max. 0.5 mm
between cable and sealing
Feeder cable
Pole with
installation interface
1.
2.
3.
4.
5.
6.
7.
8.
Insert the plugs
at unused holes
Torque socket screw M8
Max. 20 Nm (12x)
1)
162
1)
Tighten all screws alternating and evenly. A crosswise tightening of the outer
screws will cause a more homogeneous distribution of sealing pressure.
After tightening, check extraction force of all cables.
700 MHz Fixed Tilt Panel Antennas
698-894 MHz
•
V Polarization
Horizontal
Beamwidth
Frequency
Gain
(dBd)
Model
Series
Electrical
Downtilt
60°
698–894
12
840 21110
0° to 14°
V
698–894
13.5
840 21140
0° to 10°
698–894
15
840 21170
0° to 8°
698–894
10.8
840 21120
698–894
12.4
698–894
13.8
80°
698-894 MHz
•
Polarization
Height
(inches)
Page
51.2
165
V
78
166
V
103.8
167
0° to 14°
V
51.7
171
840 21150
0° to 10°
V
73
172
840 21180
0° to 8°
V
104.9
173
X Polarization
Horizontal
Beamwidth
Frequency
Gain
(dBd)
Model
Series
Electrical
Downtilt
Polarization
60°
698–894
12
840 21210
0° to 14°
+45° and -45°
51.2
168
698–894
13.5
840 21240
0° to 10°
+45° and -45°
78
169
698–894
15
840 21270
0° to 8°
+45° and -45°
103.8
170
698–894
10.8
840 21220
0° to 14°
+45° and -45°
51.7
174
698–894
12.4
840 21250
0° to 10°
+45° and -45°
73
175
698–894
13.8
840 21280
0° to 8°
+45° and -45°
104.9
176
80°
Height
(inches)
Page
700 MHz
Fixed Tilt Single/Dualband
163
700 MHz
Fixed Tilt Single/Dualband
700 MHz Fixed Tilt Panel Antennas
164
840 21110 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Band (MHz)
HPBW
698–894
V
60°
Electrical Downtilt
0° to 14°
Single Polarization
Fixed with 2° increments
Specifications
Gain
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
698–806 MHz
12 dBd
63°
806–894 MHz
12.8 dBd
60°
15.5°
14°
Mounting Hardware included
Description
Weight
2-point mounting kit for 2 to 4.5 inch
4.4 lb (2 kg)
(50 to 115 mm) OD mast.
2-point tilt kit
7.4 lb (3.7 kg)
0–15 degrees downtilt angle.
See illustrations and instructions on pages 177–178
30
o
270o
90o
12
0o
0o
24
0o
21
180o
Horizontal pattern
Vertical - polarization
3
30
o
0o
10
30
0o
60
20
o
30
270o
90
12
0o
0o
24
0o
21
180o
0o
Specifications
30
15
Radome
Wind survival
o
60
20
0o
Dimensions
LxWxD
Weight
Wind load
Front/Side/Rear
0o
0o
Lightning protection
Connector
-15 dB
-20 dB
-23 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
7-16 DIN female
(sealable long neck) (backmounted)
51.2 x 14.7 x 4.1 inches (1301 x 374 x 103 mm)
18.7 lb (8.5 kg)
at 93 mph (150kph)
117 lbf / 49 lbf / 142 lbf
(520 N) / (215 N) / (632 N)
UV-resistant fiberglass
150 mph (240 kph)
3
10
30
33
Power handling
Electrical downtilt
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Primary test frequencies
Secondary test frequencies
0o
15
Polarized
Front-to-back ratio
0o
PIM (2x20w)
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
Vertical
30 dB
(worst case, within 20 Degree cone)
500 watts (at 50°C)
0 to 14 degrees fixed (2° increments)
33
Frequency range
Impedance
VSWR / Return loss
Vertical pattern
Vertical - polarization
51.2 inches
(1301 mm)
39.4 inches
(1000 mm)
Order Information
Model
840 21110-00
840 21110-02
840 21110-04
840 21110-06
840 21110-08
840 21110-10
840 21110-12
840 21110-14
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
Antenna with 10° electrical downtilt
Antenna with 12° electrical downtilt
Antenna with 14° electrical downtilt
4.1 inches
(103 mm)
3.9 inches
(100 mm)
14.7 inches
(374 mm)
11129-B
165
840 21140 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
698–894
V
60°
Electrical Downtilt
0° to 10°
Single Polarization
Fixed with 2° increments
Specifications
0o
3
30
o
33
0o
10
30
0o
o
60
20
Frequency range
Impedance
VSWR / Return loss
30
270o
90o
12
0o
0o
24
Horizontal pattern
Vertical - polarization
30
o
0o
33
0o
3
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
21
Power handling
Electrical downtilt
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Primary test frequencies
Secondary test frequencies
Lightning protection
Connector
0o
15
180o
Polarized
Front-to-back ratio
0o
21
0o
15
180o
PIM (2x20w)
Vertical pattern
Vertical - polarization
Dimensions
LxWxD
Weight
Wind load
Front/Side/Rear
Radome
Wind survival
Specifications
Gain
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
30.3 inches
(770 mm)
78 inches
(1980 mm)
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
Vertical
30 dB
(worst case, within 20 Degree cone)
500 watts (at 50°C)
0 to 10 degrees fixed (2° increments)
-15 dB
-20 dB
-23 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
7-16 DIN female
(sealable long neck) (backmounted)
78 x 14.7 x 4.1 inches (1980 x 374 x 103 mm)
28.7 lb (13 kg)
at 93 mph (150kph)
178 lbf / 79 lbf / 234 lbf
(790 N) / (350 N) / (1038 N)
UV-resistant fiberglass
150 mph (240 kph)
698–806 MHz
13.5 dBd
63°
806–894 MHz
14.3 dBd
60°
10.7°
9.5°
Mounting Hardware included
Description
Weight
3-point mounting kit for 2 to 4.5 inch
6.6 lb (3 kg)
(50 to 115 mm) OD mast.
3-point tilt kit
16.5 lb (7.5 kg)
0–10 degrees downtilt angle.
See illustrations and instructions on pages 177–178
30.3 inches
(770 mm)
Order Information
4.1 inches
(103 mm)
3.9 inches
(100 mm)
14.7 inches
(374 mm)
11132-B
166
Model
840 21140-00
840 21140-02
840 21140-04
840 21140-06
840 21140-08
840 21140-10
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
Antenna with 10° electrical downtilt
840 21170 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
698–894
V
60°
Electrical Downtilt
0° to 8°
Single Polarization
Fixed with 2° increments
Specifications
270o
7.8°
6.8°
12
0o
0o
0o
21
180o
Horizontal pattern
Vertical - polarization
30
3
o
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
21
180o
0o
806–894 MHz
15.8 dBd
60°
90o
24
-15 dB
-20 dB
-23 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
7-16 DIN female (sealable long neck) (backmounted)
103.8 x 14.7 x 4.1 inches (2637 x 374 x 103 mm)
37.5 lb (17 kg)
at 93 mph (150kph)
237 lbf / 105 lbf / 291 lbf
(1053 N) / (467 N) / (1294 N)
UV-resistant fiberglass
150 mph (240 kph)
698–806 MHz
15 dBd
63°
30
o
30
15
Gain
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
o
60
20
0o
Specifications
3
15
Radome
Wind survival2
0o
0o
Lightning protection
Connector
Dimensions
LxWxD
Weight
Wind load
Front/Side/Rear
0o
10
30
33
Polarized
Front-to-back ratio
Power handling
Electrical downtilt
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Primary test frequencies
Secondary test frequencies
0o
PIM1 (2x20w)
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
Vertical
30 dB (worst case, within 20 Degree cone)
500 watts (at 50°C)
0 to 8 degrees fixed (2° increments)
33
Frequency range
Impedance
VSWR1 / Return loss
Vertical pattern
Vertical - polarization
40.1 inches
(1018 mm)
103.8 inches
(2637 mm)
Mounting Hardware included
Description
Weight
3-point mounting kit for 2 to 4.5 inch
6.6 lb (3 kg)
(50 to 115 mm) OD mast.
3-point tilt kit
16.5 lb (7.5 kg)
0–10 degrees downtilt angle.
See illustrations and instructions on pages 177–178
40.1 inches
(1018 mm)
Order Information
Model
840 21170-00
840 21170-02
840 21170-04
840 21170-06
840 21170-08
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
4.1 inches
(103 mm)
3.9 inches
(100 mm)
14.7 inches
(374 mm)
11135-D
167
840 21210 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
698–894
X
60°
Electrical Downtilt
0° to 14°
Dual Polarization
Fixed with 2° increments
Specifications
Frequency range
Impedance
VSWR / Return loss
0o
o
3
30
33
0o
10
30
0o
o
60
20
PIM (2x20w)
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
Horizontal pattern
45° - polarization
0o
3
30
o
33
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
Vertical pattern
45° - polarization
Polarized
Front-to-back ratio
Power handling
Electrical downtilt range
Isolation
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Crosspolar discrimination
azimuth 30°
30° azimuth 60°
Primary test frequencies
Secondary test frequencies
Lightning protection
Connector
Dimensions
LxWxD
Weight
Wind load
Front/Side/Rear
Radome
Wind survival
Specifications
Gain
tilt 0°–6°
tilt 8°–14°
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
51.2 inches
(1301 mm)
39.4 inches
(1000 mm)
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
+45° and -45°
30 dB (worst case, within 20 degree cone)
500 watts (at 50°C)
0–14 degrees (2° increments)
30 dB
-15 dB
-20 dB
-23 dB
20 dB
10 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
2 x 7-16 DIN female
(sealable long neck) (backmounted)
51.2 x 14.7 x 4.1 inches (1301 x 374 x 103 mm)
20.9 lb (9.5 kg)
at 93 mph (150kph)
117 lbf / 49 lbf / 142 lbf
(520 N) / (215 N) / (632 N)
UV-resistant fiberglass
150 mph (240 kph)
698–806 MHz
12 dBd
11.5 dBd
63°
806–894 MHz
12.8 dBd
12.3 dBd
60°
15.5°
14°
Mounting E uipment
Description
Weight
2-point mounting kit for 2 to 4.5 inch
4.4 lb (2 kg)
(50 to 115 mm) OD mast.
2-point tilt kit
7.4 lb (3.7 kg)
0–15 degrees downtilt angle.
See illustrations and instructions on pages 177–178
Order Information
4.1 inches
(103 mm)
3.9 inches
(100 mm)
14.7 inches
(374 mm)
11138-B
168
Model
840 21210-00
840 21210-02
840 21210-04
840 21210-06
840 21210-08
840 21210-10
840 21210-12
840 21210-14
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
Antenna with 10° electrical downtilt
Antenna with 12° electrical downtilt
Antenna with 14° electrical downtilt
840 21240 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
698–894
X
60°
Electrical Downtilt
0° to 10°
Dual Polarization
Fixed with 2° increments
Specifications
30
o
30
270o
90o
12
0o
0o
24
0o
21
180o
Horizontal pattern
45° - polarization
3
o
0o
30
-15 dB
-20 dB
-23 dB
10
30
0o
20 dB
10 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
2 x 7-16 DIN female (sealable long neck) (backmounted)
78 x 14.7 x 4.1 inches (1980 x 374 x 103 mm)
29.8 lb (13.5 kg)
7.68 ft2 (0.714 m2)
UV-resistant fiberglass
150 mph (240 kph)
806–894 MHz
14.3 dBd
60°
10.7°
9.5°
Mounting E uipment
Description
Weight
3-point mounting kit for 2 to 4.5 inch
6.6 lb (3 kg)
(50 to 115 mm) OD mast.
3-point tilt kit
16.5 lb (7.5 kg)
0–10 degrees downtilt angle.
See illustrations and instructions on pages 177–178
30
270o
90o
12
0o
0o
24
0o
21
180o
0o
698–806 MHz
13.5 dBd
63°
o
60
20
15
Gain
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
o
60
20
0o
Specifications
3
15
Dimensions
LxWxD
Weight
Equivalent flat plate area
Radome
Wind survival2
0o
0o
Lightning protection
Connector
0o
10
30
33
Polarized
Front-to-back ratio
Power handling
Electrical downtilt range
Isolation
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Crosspolar discrimination
azimuth 30°
30° azimuth 60°
Primary test frequencies
Secondary test frequencies
0o
PIM1 (2x20w)
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
+45° and -45°
30 dB (worst case, within 20 Degree cone)
500 watts (at 50°C)
0–10 degrees (2° increments)
30 dB
33
Frequency range
Impedance
VSWR1 / Return loss
Vertical pattern
45° - polarization
30.3 inches
(770 mm)
78 inches
(1980 mm)
30.3 inches
(770 mm)
Order Information
Model
840 21240-00
840 21240-02
840 21240-04
840 21240-06
840 21240-08
840 21240-10
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
Antenna with 10° electrical downtilt
4.1 inches
(103 mm)
3.9 inches
(100 mm)
14.7 inches
(374 mm)
11141-A
169
840 21270 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
698–894
X
60°
Electrical Downtilt
0° to 8°
Dual Polarization
Fixed with 2° increments
Specifications
requency range
Impedance
VSWR1 / Return loss
0o
PIM1 (2x20w)
o
3
30
33
0o
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
+45° and -45°
30 dB (worst case, within 20 Degree cone)
500 watts (at 50°C)
0–8 degrees (2° increments)
30 dB
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
Horizontal pattern
45° - polarization
0o
3
30
o
33
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
Vertical pattern
45° - polarization
Polarized
Front-to-back ratio
Power handling
Electrical downtilt range
Isolation
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Crosspolar discrimination
azimuth 30°
30° azimuth 60°
Primary test frequencies
Secondary test frequencies
-15 dB
-20 dB
-23 dB
20 dB
10 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
2 x 7-16 DIN female (sealable long neck) (backmounted)
103.8 x 14.7 x 4.1 inches (2637 x 374 x 103 mm)
38.1 lb (17.3 kg)
at 93 mph (150kph)
237 lbf / 105 lbf / 291 lbf
(1053 N) / (467 N) / (1294 N)
UV-resistant fiberglass
150 mph (240 kph)
Lightning protection
Connector
Dimensions
LxWxD
Weight
Wind load
Front/Side/Rear
Radome
Wind survival2
Specifications
Gain
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
40.1 inches
(1018 mm)
103.8 inches
(2637 mm)
698–806 MHz
15 dBd
63°
806–894 MHz
15.8 dBd
60°
7.8°
6.8°
Mounting E uipment
Description
Weight
3-point mounting kit for 2 to 4.5 inch
6.6 lb (3 kg)
(50 to 115 mm) OD mast.
3-point tilt kit
16.5 lb (7.5 kg)
0–7 degrees downtilt angle.
See illustrations and instructions on pages 177–178
40.1 inches
(1018 mm)
Order Information
4.1 inches
(103 mm)
3.9 inches
(100 mm)
11144-D
170
14.7 inches
(374 mm)
Model
840 21270-00
840 21270-02
840 21270-04
840 21270-06
840 21270-08
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
840 21120 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
698–894
V
80°
Electrical Downtilt
0° to 14°
Single Polarization
Fixed with 2° increments
Specifications
Radome
Wind survival2
Specifications
Gain
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
698–806 MHz
10.8 dBd
80°
806–894 MHz
11.6 dBd
75°
15.5°
14°
Mounting Hardware included
Description
Weight
2-point mounting kit for 2 to 4.5 inch
4.4 lb (2 kg)
(50 to 115 mm) OD mast.
2-point tilt kit
7.4 lb (3.7 kg)
0–15 degrees downtilt angle.
See illustrations and instructions on pages 177–178
30
o
20
dB
270o
dB
3
6
10
20
20
10
6
90o
3
10
20
30
40
50
0o
24
12
0o
60
70
80
%
90
180o
Horizontal pattern
Vertical - polarization
30
o
0o
dB
3
30
0o
o
60
6
10
20
270o
dB
dB
3
6
10
20
20
10
6
3
90o
10
20
30
40
50
0o
24
12
0o
60
70
80
%
90
180o
0o
15
Dimensions
LxWxD
Weight
Wind load
Front/Side/Rear
10
0o
15
Lightning protection
Connector
-10 dB
-14 dB
-17 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
7-16 DIN female
(sealable long neck)
51.7 x 11.8 x 5.9 inches (1314 x 300 x 151 mm)
34 lb (15.4 kg)
at 93 mph (150kph)
130 lbf / 47 lbf / 138 lbf
(575 N) / (209 N) / (610 N)
UV-resistant fiberglass
150 mph (240 kph)
o
60
6
0o
33
Power handling
Electrical downtilt range
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Primary test frequencies
Secondary test frequencies
3
30
0o
21
0o
Polarized
Front-to-back ratio
0o
dB
21
0o
PIM1 (2x20w)
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
Vertical
25 dB
(worst case, within 20 Degree cone)
500 watts (at 50°C)
0–14 degrees (2° increments)
0o
33
Frequency range
Impedance
VSWR1 / Return loss
Vertical pattern
Vertical - polarization
51.7 inches
(1314 mm)
54.3 inches
(1378 mm)
55.8 inches
(1418 mm)
Order Information
Model
840 21120-00
840 21120-02
840 21120-04
840 21120-06
840 21120-08
840 21120-10
840 21120-12
840 21120-14
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
Antenna with 10° electrical downtilt
Antenna with 12° electrical downtilt
Antenna with 14° electrical downtilt
5.9 inches
(151 mm)
11.8 inches
(300 mm)
11130-A
171
840 21150 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
698–894
V
80°
Electrical Downtilt
0° to 10°
Single Polarization
Fixed with 2° increments
Specifications
30
o
0o
33
0o
dB
3
30
0o
o
60
6
Frequency range
Impedance
VSWR / Return loss
10
20
dB
270o
dB
3
6
10
20
20
10
6
90o
3
10
20
PIM (2x20w)
30
40
50
0o
24
12
0o
60
70
80
90
0o
15
21
0o
%
180o
Horizontal pattern
Vertical - polarization
30
o
0o
33
0o
dB
3
30
0o
o
60
6
10
20
270o
dB
dB
3
6
10
20
20
10
6
3
90o
Polarized
Front-to-back ratio
Power handling
Electrical downtilt
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Primary test frequencies
Secondary test frequencies
10
20
30
40
50
0o
24
12
0o
60
70
80
90
0o
15
21
0o
%
180o
Lightning protection
Connector
Vertical pattern
Vertical - polarization
Dimensions
LxWxD
Weight
Wind load
Front/Side/Rear
Radome
Wind survival
Specifications
Gain
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
73 inches
(1854 mm)
75.5 inches
(1918 mm)
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
Vertical
25 dB
(worst case, within 20 degree cone)
500 watts (at 50°C)
0 to 10 degrees fixed (2° increments)
-10 dB
-14 dB
-17 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
7-16 DIN female
(sealable long neck)
73 x 11.8 x 5.9 inches (1854 x 300 x 151 mm)
44 lb (20 kg)
at 93 mph (150kph)
199 lbf / 71 lbf / 208 lbf
(883 N) / (315 N) / (923 N)
UV-resistant fiberglass
150 mph (240 kph)
698–806 MHz
12.4 dBd
80°
806–894 MHz
13.4 dBd
75°
10.7°
9.5°
Mounting Hardware included
Description
Weight
3-point mounting kit for 2 to 4.5 inch
6.6 lb (3 kg)
(50 to 115 mm) OD mast.
3-point tilt kit
16.5 lb (7.5 kg)
0–10 degrees downtilt angle.
See illustrations and instructions on pages 177–178
77.1 inches
(1958 mm)
Order Information
5.9 inches
(151 mm)
11.8 inches
(300 mm)
11133-FRO/e
172
Model
840 21150-00
840 21150-02
840 21150-04
840 21150-06
840 21150-08
840 21150-10
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
Antenna with 10° electrical downtilt
840 21180 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
698–894
V
80°
Electrical Downtilt
0° to 8°
Single Polarization
Fixed with 2° increments
Specifications
Specifications
Gain
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
30
o
o
60
6
10
20
270o
dB
dB
3
6
10
20
20
10
6
90o
3
10
20
30
40
50
0o
24
12
0o
60
70
80
21
0o
%
-10 dB
-14 dB
-17 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
7-16 DIN female (sealable long neck)
104.9 x 11.8 x 5.9 inches (2664 x 300 x 151 mm)
57 lb (25.9 kg)
at 93 mph (150kph)
289 lbf / 106 lbf / 303 lbf
(1285 N) / (470 N) / (1344 N)
UV-resistant fiberglass
150 mph (240 kph)
698–806 MHz
13.8 dBd
80°
806–894 MHz
14.6 dBd
75°
7.8°
6.8°
90
180o
Horizontal pattern
Vertical - polarization
30
o
0o
dB
3
30
0o
o
60
6
10
20
270o
dB
dB
3
6
10
20
20
10
6
3
90o
10
20
30
40
50
0o
24
12
0o
60
70
80
%
90
180o
0o
15
Radome
Wind survival2
3
30
0o
0o
15
Lightning protection
Connector
Dimensions
LxWxD
Weight
Wind load
Front/Side/Rear
dB
0o
33
Polarized
Front-to-back ratio
Power handling
Electrical downtilt
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Primary test frequencies
Secondary test frequencies
0o
0o
33
PIM1 (2x20w)
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
Vertical
25 dB (worst case, within 20 Degree cone)
500 watts (at 50°C)
0 to 8 degrees fixed (2° increments)
21
0o
Frequency range
Impedance
VSWR1 / Return loss
Vertical pattern
Vertical - polarization
Mounting Hardware included
Description
Weight
3-point mounting kit for 2 to 4.5 inch
6.6 lb (3 kg)
(50 to 115 mm) OD mast.
3-point tilt kit
16.5 lb (7.5 kg)
0–7 degrees downtilt angle.
See illustrations and instructions on pages 177–178
104.9 inches
(2664 mm)
107.4 inches
(2728 mm)
109 inches
(2768 mm)
Order Information
Model
840 21180-00
840 21180-02
840 21180-04
840 21180-06
840 21180-08
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
4.3 inches
(151 mm)
11.8 inches
(300 mm)
11136-A
173
840 21220 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
698–894
X
80°
Electrical Downtilt
0° to 14°
Dual Polarization
Fixed with 2° increments
Specifications
0o
3
30
o
33
0o
10
30
0o
60
20
o
Frequency range
Impedance
VSWR1 / Return loss
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
Horizontal pattern
45° - polarization
3
30
o
0o
33
0o
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
21
Polarized
Front-to-back ratio
Power handling
Electrical downtilt range
Isolation
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Crosspolar discrimination
azimuth 30°
30° azimuth 60°
Primary test frequencies
Secondary test frequencies
0o
15
180o
PIM1 (2x20w)
Vertical pattern
45° - polarization
Lightning protection
Connector
Dimensions
LxWxD
Weight
Wind load
Front/Side/Rear
Radome
Wind survival2
Specifications
Gain
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
51.7 inches
(1314 mm)
54.3 inches
(1378 mm)
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
+45° and -45°
25 dB (worst case, within 20 Degree cone)
500 watts (at 50°C)
0–14 degrees (2° increments)
30 dB
-10 dB
-14 dB
-17 dB
20 dB
10 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
2 x 7-16 DIN female (sealable long neck)
51.7 x 11.8 x 5.9 inches (1314 x 300 x 151 mm)
34 lb (15.4 kg)
at 93 mph (150kph)
130 lbf / 47 lbf / 138 lbf
(575 N) / (209 N) / (610 N)
UV-resistant fiberglass
150 mph (240 kph)
698–806 MHz
10.8 dBd
80°
806–894 MHz
11.6 dBd
75°
15.5°
14°
Mounting E uipment
55.8 inches
(1418 mm)
Description
Weight
2-point mounting kit for 2 to 4.5 inch
4.4 lb (2 kg)
(50 to 115 mm) OD mast.
2-point tilt kit
7.4 lb (3.7 kg)
0–15 degrees downtilt angle.
See illustrations and instructions on pages 177–178
Order Information
5.9 inches
(151 mm)
11.8 inches
(300 mm)
11139-A
174
Model
840 21220-00
840 21220-02
840 21220-04
840 21220-06
840 21220-08
840 21220-10
840 21220-12
840 21220-14
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
Antenna with 10° electrical downtilt
Antenna with 12° electrical downtilt
Antenna with 14° electrical downtilt
840 21250 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
698–894
X
80°
Electrical Downtilt
0° to 10°
Dual Polarization
Fixed with 2° increments
Specifications
70o
90o
12
0o
24
0o
0o
21
-10 dB
-14 dB
-17 dB
10.7°
9.5°
o
30
3
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
180o
0o
806–894 MHz
13.4 dBd
75°
0o
15
698–806 MHz
12.4 dBd
80°
Description
Weight
3-point mounting kit for 2 to 4.5 inch
6.6 lb (3 kg)
(50 to 115 mm) OD mast.
3-point tilt kit
16.5 lb (7.5 kg)
0–10 degrees downtilt angle.
See illustrations and instructions on pages 177–178
180o
Horizontal pattern
45° - polarization
20 dB
10 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
2 x 7-16 DIN female (sealable long neck)
73 x 11.8 x 5.9 inches (1854 x 300 x 151 mm)
44 lb (20 kg)
at 93 mph (150kph)
199 lbf / 71 lbf / 208 lbf
(883 N) / (315 N) / (923 N)
UV-resistant fiberglass
150 mph (240 kph)
Mounting E uipment
30
o
30
0o
Gain
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
o
60
20
15
Specifications
0o
0o
Radome
Wind survival2
3
10
30
33
Lightning protection
Connector
Dimensions
LxWxD
Weight
Wind load
Front/Side/Rear
0o
0o
Polarized
Front-to-back ratio
Power handling
Electrical downtilt range
Isolation
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Crosspolar discrimination
azimuth 30°
30° azimuth 60°
Primary test frequencies
Secondary test frequencies
33
PIM1 (2x20w)
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
+45° and -45°
25 dB (worst case, within 20 Degree cone)
500 watts (at 50°C)
0–10 degrees (2° increments)
30 dB
21
Frequency range
Impedance
VSWR1 / Return loss
Vertical pattern
45° - polarization
73 inches
(1854 mm)
75.5 inches
(1918 mm)
77.1 inches
(1958 mm)
Order Information
Model
840 21250-00
840 21250-02
840 21250-04
840 21250-06
840 21250-08
840 21250-10
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
Antenna with 10° electrical downtilt
5.9 inches
(151 mm)
11.8 inches
(300 mm)
11142-A
175
840 21280 series
700/850 MHz Single Band Panel Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
HPBW
698–894
X
80°
Electrical Downtilt
0° to 8°
Dual Polarization
Fixed with 2° increments
Specifications
Frequency range
Impedance
VSWR1 / Return loss
0o
30
o
33
0o
3
PIM1 (2x20w)
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
Horizontal pattern
45° - polarization
30
o
0o
33
0o
3
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
Vertical pattern
45° - polarization
Polarized
Front-to-back ratio
Power handling
Electrical downtilt range
Isolation
Normalized radiation pattern
envelope at 80° azimuth
envelope at 90° azimuth
envelope at 100° azimuth
Crosspolar discrimination
azimuth 30°
30° azimuth 60°
Primary test frequencies
Secondary test frequencies
Lightning protection
Connector
Dimensions
LxWxD
Weight
Wind load
Front/Side/Rear
Radome
Wind survival2
698–894 MHz
50 ohms
1.35:1 / 16.5 dB
primary test frequencies
( 1.43:1 / 15 dB
secondary test frequencies)
IM3
IM5
IM7-9
-150 dBc
-160 dBc
-170 dBc
+45° and -45°
25 dB (worst case, within 20 Degree cone)
500 watts (at 50°C)
0–8 degrees (2° increments)
30 dB
-10 dB
-14 dB
-17 dB
20 dB
10 dB
752 MHz, 782 MHz
704 MHz, 734 MHz
835 MHz, 880 MHz
Chassis ground
2 x 7-16 DIN female (sealable long neck)
104.9 x 11.8 x 5.9 inches (2664 x 300 x 151 mm)
61 lb (27.7 kg)
at 93 mph (150kph)
289 lbf / 106 lbf / 303 lbf
(1285 N) / (470 N) / (1344 N)
UV-resistant fiberglass
150 mph (240 kph)
Specifications
Gain
Horizontal beamwidth
3 dB points
Vertical beamwidth
3 dB points
104.9 inches
(2664 mm)
107.4 inches
(2728 mm)
698–806 MHz
13.8 dBd
80°
806–894 MHz
14.6 dBd
75°
7.8°
6.8°
Mounting E uipment
Description
Weight
3-point mounting kit for 2 to 4.5 inch
6.6 lb (3 kg)
(50 to 115 mm) OD mast.
3-point tilt kit
16.5 lb (7.5 kg)
0–7 degrees downtilt angle.
See illustrations and instructions on pages 177–178
109 inches
(2768 mm)
Order Information
5.9 inches
(151 mm)
11.8 inches
(300 mm)
11145-B
176
Model
840 21280-00
840 21280-02
840 21280-04
840 21280-06
840 21280-08
Description
Antenna with 0° electrical downtilt
Antenna with 2° electrical downtilt
Antenna with 4° electrical downtilt
Antenna with 6° electrical downtilt
Antenna with 8° electrical downtilt
840 21000 series
Mounting Hardware
2-point Mounting Hardware
for 4 ft Antennas
3-point Mounting Hardware
for 6 ft and 8 ft Antennas
Mounting Brackets
Mounting Brackets
for use with 2-point mount 21000 series antennas
Mast dia. 2–4.5 inches (50–115 mm)
Weight: 4.4 lb (2 kg)
for use with 3-point mount 21000 series antennas
Mast dia. 2–4.5 inches (50–115 mm)
Weight: 6.6 lb (3 kg)
Mechanical Tilt Brackets
Mechanical Tilt Brackets
for use with 2-point mount 21000 series antennas
Weight: 7.4 lb (3.7 kg)
for use with 3-point mount 21000 series antennas
Weight: 16.5 lb (7.5 kg)
177
840 21000 series
Mounting Information
60° Panel Antennas
80° Panel Antennas
Drain Location
Note: Antenna must be
mounted with the
drain holes at the
bottom.
2-Point
3-Sector Mounting
2-Point
3-Sector Mounting
Dout
Mast dia.
Dout
742 033
4.5 (114.3 mm)
Dout
742 034
5.5 (139.7 mm)
25.5 inches
(648 mm)
26.5 inches
(673.1 mm)
Dout
Mast dia.
Dout
742 033
4.5 (114.3 mm)
Dout
742 034
5.5 (139.7 mm)
22.5 inches
(572 mm)
23.25 inches
(591 mm)
3-sector mounting systems are 2-point mounting arrangements. For antennas with 3 mounting points, consultation with structural
designers/engineers is strongly recommended in accordance with local regulations. See page 358 for sector mount kit specifications.
178
Remote Electrical Downtilt
Model
Description
Page
860 10148
Remote control unit
188
860 10149
Integrated remote control unit
189
860 10006
Central control unit
190
860 10026
Central control unit
190
860 10046
Portable control adapter
192
860 10156
Antenna line configurator
193
860 10002
RET remote control signal splitter
195
860 10030
Lightning protection device
196
782 11053
Smart bias tee
197
782 11054
Smart bias tee
197
782 11055
Smart bias tee
197
782 11056
Smart bias tee
197
782 11063
Smart bias tee
197
782 11064
Smart bias tee
197
782 11065
Smart bias tee
197
782 11066
Smart bias tee
197
782 10577
Bias Tee
200
782 10578
Bias Tee
200
782 10429
Bias Tee
202
793 304
Bias tee
203
793 301
DC stop
204
782 10850V01
DC stop
205
840 104nn Series
Remote Control Cables -Black (150 m and 200 m)
206
GC-1
Grounding clamp
208
RET
Remote Electrical Tilt
179
RET
Remote Electrical Tilt
Remote Electrical Downtilt
180
Remote Electrical Tilt
RET Components:
RC
Remote Control
nit
CCU (Central Control Unit)
DC Power and Signal Splitter
Control Cable
Lightning Protection Device
Grounding Kit
Central Control Unit
Portable Control Unit
Optional:
Dual Band Combiners – See “TMAs, Filters,
Electrical Accessories” section for more detail
Smart Bias Tee
DTMA (Double Tower Mounted Amplifier)
See “TMAs, Filters, Electrical Accessories” section
for more detail
Remote Control Unit
Lightning Protection
Device
Signal Splitter
Remote Control
Cables
Antenna Line
Configurator
Smart Bias Tee
Kathrein is a member of the Antenna Interface
Standards Group that has the objective of
introducing open control standards for base station
antennas with remotely adjustable tilt.
Grounding Kit
181
Remote Electrical Tilt
Typical RET Site Configurations
Three options are offered for communication between the CCU and RCUs:
182
Individual control cables (with splitters and/or daisy chain feature on RCUs)
Using Smart Bias Tee’s to multiplex control signals onto the feeder lines
Using a combination of Bias Tee and TMAs
Using a direct connection to an RRH via control cable
Remote Electrical Tilt
RET System Control:
Central Control Unit (CCU)
The major component for controlling the
RCUs is the Central Control Unit (CCU),
installed at the BTS.
The CCU can be accessed from the network
control center via the Ethernet input and/or directly through a personal computer
via the RS 232 input or Ethernet input. No special software is required for standard
operation. AC/DC and DC-only models are available.
The CCU appears as an addressable IP device to the controlling computer or network
and is accessed via standard Web browser (e.g. Internet Explorer). IP addresses are user
programmable; access is password protected.
The display which appears contains all the required control functions for normal
service and installation. In addition to permitting the configuration and control of
the connected RCUs and TMAs, the CCU program also displays the device status,
command history list and various types of system errors. All AISG alarms can be read via
the alarm interface.
The software and firmware associated with both the CCU’s and RCUs are continually
evolving and may be updated easily using the update pages available in the browser
application. Upgrade software may be obtained on request; registered users of
Kathrein-Scala’s on-line data library may download updates from the library.
The CCU also provides 8 user-programmable open-collector alarm outputs for interface
with the BTS.
For more detail, please see the RET Software Manual, or the RET Hardware Manual,
available on request.
Portable Control Adapter (PCA)
The PCA is a portable controller for Kathrein’s Remote Electrical Tilt system (RET). It is
a simple device for operating remote control units (RCUs) attached to Kathrein base
station antennas. This product is designed for use by installers or maintenance staff
with temporary site access. A standard Central Control Unit (CCU) is not required.
Control from the network operations center is not available using the PCA.
The PCA consists of a small control box and Windows- based software installed on a
laptop. The control box transforms the USB inter-face into an AISG-compatible interface
(RS 485 + DC voltage). Together with the supplied Windows-based software, all
functions of the RCU can be controlled via a laptop or PC.
Up to 27 RCUs can be controlled using a single PCA. A site may be upgraded for
remote control via the network control center by replacing the PCA with a standard
CCU.
183
Feeder Line Installation
Remote Electrical Tilt
Feeder Line Installation for Panel Antennas with
Four Connectors on Two Levels
Step 1
se of improper tools
may damage the
interfaces. Kathrein
strongly recommends
using the 850-10005
Installation Tool with a
standard tor ue wrench
to tighten the nuts of the
feeder line connectors.
There are four interfaces for
feeding the antenna located at
the bottom.
To make the installation of the
feeder lines and the connectors
easier, the interfaces are
arranged on two levels.
The feeder line installation
sequence is: 1, 2, 3, 4.
Put the connector carefully in
place and hand-screw the nut on.
Use a torque wrench to finish the
installation (see the 850-10005
Installation Tool).
Step 2
After the feeder lines have been
installed the remote control units
(RCU) can be installed.
See the instructions Attaching
the RCU for details.
Note
Sealing of cap nuts
on correctly installed
connectors for additional
weather protection is
not re uired. It is not
recommended by the
connector manufacturers.
184
10922-D
Remote Electrical Tilt
Feeder Line Installation
Feeder Line Installation forTriple-band Antennas
Step 1
The feeder line installation
sequence is: 4, 5, 6, 7, 8, 9.
Put the connector carefully in
place and hand-screw the nut on.
Use a torque wrench to finish the
installation (see the 850-10005
Installation Tool).
se of improper tools
may damage the
interfaces. Kathrein
strongly recommends
using the 850 10005
Installation Tool with a
standard tor ue wrench
to tighten the nuts of the
feeder line connectors.
Connector Arrangement
Repeat the operations shown in
figures A and B for each feeder
line.
There are six RF connections and three RET
interfaces located at the bottom of the antenna.
Do not remove the RC
connection covers until the
feeder line installation is
complete.
The downtilt must be set
to 0° before the RC is
installed see the instructions
Attaching the RC for
details .
Step 2
After the feeder lines have been
installed the remote control units
(RCU) can be installed.
Not following these
instructions may damage the
downtilt spindle.
The RCU installation sequence
is: 1, 2, 3.
See the instructions Attaching
the RCU for details.
Note
Sealing of cap nuts
on correctly installed
connectors for additional
weather protection is
not re uired. It is not
recommended by the
connector manufacturers.
185
Attaching the RC
Remote Electrical Tilt
Step 1
Remove the protective downtilt
adjustment cap completely from
the antenna.
Remove the black locking ring by
pulling it downward.
Check the phase shifter for proper
function by turning the gear
wheel . The phase shifter will go
smoothly between minimum and
maximum tilt when functioning
properly.
Threaded attachment fitting
for the downtilt adjustment
cap and the RCU.
Locking ring.
Downtilt adjustment spindle
with integrated downtilt
degree scale.
Antenna tilt control housing.
Gear wheel for the RCU.
Reset the downtilt to 0 degrees.
Step 2
Clean the thread surface.
Apply the mounting-paste evenly
onto the full circumference of the
thread as illustrated in the figure.
Avoid ingestion of mounting-paste
or contact with eyes. In case of
contact with eyes rinse thoroughly
with plenty of water and seek
medical advice. Avoid long-term
contact with skin. In case of
contact with skin wash off with
soap and water.
For further information please read the
Safety data-sheet 91/155 EEC , Anti-Seize
High-Tech’ Assembly Paste different
packing sizes’ by company WEICON
GmbH & Co. KG, K nigsberger Str. 225,
D-48157 M nster,
http //www.weicon.de
Step 3
Push the attachment nut of the
RCU down towards the RCU
housing.
Place the RCU carefully over
the adjustment spindle . Be
sure the flat side of the spindle
is aligned with the flat side of the
antenna tilt control housing .
Carefully push the RCU onto the
antenna until it is firmly seated.
The RC must be kept
in vertical alignment
with the antenna during
installation or the
downtilt ad ustment
spindle may be
damaged.
To set the downtilt angle
exactly you must look
horizontally at the scale.
The lower edge of the gear
wheel must be used for
alignment purposes.
Step 4
Hand tighten the RCU
attachment nut (41 mm).
Torque setting: 11–13 ft-lbf
Connect the RCU control
cable immediately after
attachment of the RCU. The
torque setting for the control
cable connector must be 0.4–
0.7 ft-lbf ( hand-tightened’).
186
In cases where a
mechanical downtilt is
installed do not set the
mechanical tilt more than
14 degrees or the unit
may be damaged.
Remote Electrical Tilt
Control Cable Installation
Step 1
Turn this collar
Connect a control cable to the
daisy chain input on the RCU.
If the daisy chain output is not
used, do not remove the daisy
chain output protection plug.
Key
Step 2
Keyway
To use the daisy chain option.
When installing or
removing cables, turn
ONL the threaded collar
indicated, not the body of
the connector. Rotating
the connector body can
result in permanent
damage to the connector
and the device being
installed. Note that the
connectors have keyways
which must be carefully
aligned before insertion.
Insert the connector fully
until well seated before
tightening.
Remove the daisy chain output
protection plug.
Connect a control cable to the
daisy chain output on the
RCU.
Turn this
collar
Avoid tightening
connectors with
wrenches or pliers.
Connect the other end of the
control cable to the daisy chain
input on the next RCU.
Do not remove the daisy chain
termination plug from the last
RCU device.
Over tightening
connectors may
permanently damage the
RC .
Dress cables using black
UV-resistant cable ties .
Daisy chain in
Hand tighten connectors
4 to 6 in-lb .
Daisy chain out
Dual Tower Mount Amplifier
Bottom of RCU
Termination Plug
Smart Bias Tee
Lightning Protection Device
Remote Control
Signal Spitter
187
860 10148
Remote Electrical Tilt
Remote Control Unit
Kathrein’s 860 10148 Remote Control Unit (RCU) allows operators to control the electrical tilt of
compatible antennas without direct access to the antenna.
• Allows control of the antenna either locally through a laptop computer, on site desktop
computer, the optional central control unit remotely via an ethernet network or over the internet.
• May be retrofitted to compatible antennas without dismantling or removing the antenna.
• Suitable for daisy chain and splitter solutions.
• Suitable for outdoor use.
860 10148
Specifications
Daisy chain in
(male)
Daisy chain out
(female)
Bottom of RCU
7 inches
(178 mm)
Protocols
Logical interface ex factory1)
Input voltage range
Power Consumption
Connectors 2)
3GPP/AISG 2.0 and AISG 1.1 compliant
3GPP/AISG 2.0
10–30 V (pin 1 and pin 6)
1 W (standby) 8.5 W (motor activated)
2 x 8 pin connector according to IEC 60130-9
conforming with AISG
Daisy chain in: male Daisy chain out: female
Hardware interfaces
RS485A/B (pin 5, pin 3 )
power supply (pin 1, pin 6) DC return (pin 7)
conforming with AISG / 3GPP
Adjustment time (full range) 40 seconds (typical, depending on antenna type)
Adjustment cycles
50,000
Temperature range
-40°C to +60°C
Protection class
IP 24
Lightning protection
AISG interface (each pin)
2.5 kA (10/350 Ps) 8 kA (8/20 Ps)
Housing material
Profile: Aluminum anodized
Cover: Aluminum diecast coated
Weight
1 lb (455 g)
Dimensions
7 x 2.4 x 2 inches (178 x 60 x 50 mm)
Shipping dimensions
9.6 x 4 x 3.7 inches (245 x 102 x 93 mm)
Standards
EN 60950-1 (Safety)
EN 55022 (Emission)
EN 55024 (Immunity)
ETS 300019-1-4 (Environmental)
UL 60950-1 1st edition
Certifications
CE, FCC 15.107 Class B
1)
The protocol of the logical interface can be switched from 3GPP/AISG
2.0 to AISG 1.1 with a vendor specific command. Start-up operation
of the RCU 860 10148 is only possible in a RET system supporting
3GPP/AISG 2.0.
The protocol can be changed from 3GPP to AISG 1.1 as follows:
Enter “AISG1” into the additional data field “Installer’s ID” and perform
a layer 2 reset or a power reset. After switching the protocol any other
information can be entered into the “Installer’s ID” field.
Please note If the Primary of the RETsystem does not support
the standard of the logical interface ex factory’, the RCU must be
switched to the appropriate standard of the Primary before installation.
Please contact Kathrein for further information.
2)
The tightening torque for attaching the connector must be 0.4–0.7
ft-lbf (hand tightened).
2 inches
(50 mm)
KATHREIN
860 10148
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
2.4 inches
(60 mm)
188
11324-C
936.4061/b
Remote Electrical Tilt
NEW
860 10149
Integrated Remote Control Unit
Kathrein’s 860 10149 Integrated Remote Control Units (RCU) allow
operators to control the electrical tilt of compatible antennas without
direct access to the antenna.
• Are internal to selected antennas and add no additional length to
antennas so equipped.
• Are field replaceable without dismantling or removing the antenna.
• Allow control of the antenna either locally through a laptop computer,
on site desktop computer, the optional central control unit remotely via
an ethernet network or over the internet.
• Suitable for daisy chain and splitter solutions.
Specifications
Logical interface ex factory1
Protocols
Hardware interfaces
Input voltage range
Power consumption
Connectors2
Adjustment time (full range)
Adjustment cycles
Temperature range
Protection class
Lightning protection
Certification
Dimensions
Weight
Shipping dimensions
AISG 2.0
AISG 1.1 and 3GPP/AISG 2.0 compliant
RS 485A/B (pin 5, pin 3)
power supply (pin 1, pin 6) DC return (pin 7)
according to AISG / 3GPP
10–30 V (pin1, pin 6)
1 watt (standby)
10 watts (motor activated)
2 x 8 pin connector according to IEC 60130-9
according to AISG
Daisy chain in: male Daisy chain out: female
40 sec. (typical, depending on antenna type)
50,000
-40– +60° C
IP 24
AISG interface (each pin)
2.5 kA(10/350 s) 8 kA(8/20 s)
FCC 15.107 Class B Computing Devices
6.7 x 2.7 x 2.6 inches (170 x 69 x 66 mm)
1.1 lb (480 g)
9.6 x 4 x 3.7 inches (245 x 102 x 93 mm)
Daisy chain in
(male)
Daisy chain out
(female)
Retaining screw Torx 20
1
The protocol of the logical interface can be switched from 3GPP/AISG 2.0 to
AISG 1.1 and vice versa with a vendor specific command.
Please note If the Primary of the RET system doesn’t support the standard of
the logical interface ex factory’, the RCU must be switched to the appropriate
standard of the Primary before installation. Please contact Kathrein for further
information.
2
The tightning torque for fixing the connector must be 0.5 – 1.0 Nm ( handtightened’). The connector should be tightened by hand only!
6.7 inches
(170 mm)
KATHREIN
860 10149
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
2.6 inches
(66 mm)
2.7 inches
(69 mm)
11345-B
936.4045/b
189
860 10006, 860 10026
Remote Electrical Tilt
Central Control Unit
Specifications
%XAMPLESOF##5n2#5CONNECTIONS
Connectors
3 x 8 pin connector
according to IEC 60130-9, female,
conforms to AISG
tightening torque for
attaching connectors
Power supply from BTS
860 10006
0.4–0.7 ft-lbf
hand tighten only
DC: -48 V /max. 1.7 A
AC: 100 V–240 V / 50–60 Hz
max. 1.6 A
860 10026
DC: -48 V /max. 1.7 A
Power supply to RCU
3 x +29 V / max. 1.7 A (in total)
3 x +13 V / max. 3.8 A (in total)
Total output power
50 W max.
Interface to RCU and TMA
RS 485 / power supply
Protocol to RCU and TMA
HDLC hex-coded command set
conforms to AISG
Interface to BTS
Ethernet (10 base T) and RS 232
Protocols to BTS
TCP/IP, PPP, HTTP/HTML, UDP,
DHCP, FTP, SNMP, ICMP/PING
Alarm interface to BTS
8 x open collector output
user programmable
Max number of RCUs
27 (depending on cable configuration )
see charts on reverse for details
Max number of DTMAs
6 (depending on cable configuration )
Temperature range
-25°C – +55°C
Dimensions
19 inches x 1 HU (height unit)
19 x 9.8 x 1.7 inches
(483 x 250 x 43.6 mm)
Shipping dimensions
23.5 x 14.4 x 5.8 inches
(597 x 367 x 148 mm)
Standards
EN 60950-1 (Safety)
EN 55022 (Emission)
EN 55024 (Immunity)
UL 60950-1, 1st edition
Certifications
CE
FCC 15.107 Class B
UL
For specific configuration requirements call Kathrein Scala Division
Communication Sales Engineering.
KATHREIN
860 10006, 860 10026
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Order Information
Model
Description
860 10006
Central control unit, AC/DC power supply
860 10026
Central control unit, DC power supply
Both units include the Central Control Unit, Manual, DC Cable,
ethernet crossover cable. The 860-10006 also includes U.S. and
European syle AC Power Cords.
TO##5
Optional Accessories
Description
Null modem RS-232 cable for connection to a local laptop computer
190
10729-K
936.2310/f
Remote Electrical Tilt
860 10006, 860 10026
Central Control Unit
The maximum control cable length (Lmax)
depends on the type of RET configuration.
In star configuration with one control cable
for each sector, the max. length of the control cable depends on the number of RCUs
per sector (N RCU/sector). In daisy-chain
configuration, the max. length depends on
the total number of RCUs (n RCU).
19 inches
(483 mm)
1.7 inches
(43.6 mm)
17 inches
(432.4 mm)
The length values are listed in the tables
below.
9.8 inches
(250 mm)
Star Configuration
N RCU/sector
1
2
3
4
5
6
7
8
9
Daisy-chain Configuration
N RCU
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
9 inches
(228.8 mm)
L1max in m
220
190
170
150
130
110
100
90
90
Star Configuration
Daisy-chain Configuration
Lmax in m
280
270
260
250
240
230
220
210
200
190
180
170
170
160
150
140
140
130
130
120
120
110
110
110
100
100
100
191
860 10046
Remote Electrical Tilt
Portable Control Adapter
Kathrein’s 860 10046 Portable Control Adapter (PCA) allows operators to
interface with Kathrein remote control units.
• CE, FCC, and UL certification
• Meets EN 60950-1, EN 55022, and EN 55024 standards
• Includes: PCA, External power supply (24 VDC / 70 W), USB cable,
AC power cable, CD-ROM (with PCA software, drivers, and manual),
installation guide, and carrying case
Specifications
Connector to RCU/TMA
External power supply
Input
Output
Input voltage of PCA
Output voltage to
RCUs/TMAs
Output power
(power supply to
RCUs/TMAs)
Current monitoring
measurement level
Over-current protection
Interface to RCU/TMA
Protocol to RCU/TMA
Interface to PC
System requirements
Max. number
of RCUs/TMAs
Max. length of control cable
Temperature range
Weight
Dimensions
1 x 8 pin connector according to IEC 60130-9,
female, conforms to AISG RF-connector (SMB male)
90–264 VAC, 47–63 Hz
24 VDC /3.0 A
24 VDC
AISG female pin 6 (24 VDC): 24 VDC 10
AISG female pin 1 (12 VDC): 14 VDC 7
RF male (at 24 VDC):
24 VDC 10
RF male (at 12 VDC):
14 VDC 7
AISG female pin 6 (24 VDC)
without load on pin 1 (12 VDC) and on RF-plug: 60W
AISG female pin 1 (12 VDC)
with max. 30W load on pin 6 (24 VDC) and/or on RF-plug: 30W
Per branch (12V, 24V. RF): 10–2500 mA
Per branch 2500 mA: (12V, 24V. RF)
RS485 / power supply / RF connector (SMB male)
HDLC hex-coded command set
conforms to AISG 1.1 and 3GPP / AISG 2.0
USB 1.1/2.0
Windows 2000, Windows XP, Vists, Win7 (32 bit version)
27/3 pcs (depending on system configuration
and length of control cable)
656 ft (200 m) / 9 RCUs (daisy chain configuration)
492 ft (150 m) / 6 RCUs (splitter configuration)
0°C to +55°C
1.2 lb (0.535 kg) (including external power adapter)
6.3 x 3.7 x 1.6 inches (160 x 95 x 40 mm)
Hand tighten only! Torque setting: 0.37–0.73 lb ft (0.5–1.0 Nm).
If powered via AISG-interface no external power supply is needed.
Switchable with software.
Standards
Certifications
EN 60950-1
EN 55022
EN 55024
CE
FCC part 15 Class B
UL (for external power adapter)
KATHREIN
860 10046
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
192
10854-G
936.2733/f
Remote Electrical Tilt
NEW
860 10156
Antenna Line Configurator
Kathrein’s 860 10156 Antenna Line Configurator (ALC) allows operators standalone
control of Kathrein remote control units.
• Configuration of AISG antenna line devices (ALD) on-site
• Checking the mechanical down-tilt with built-in sensors
• Configuration Wizard for simplified configuration of the RCU with Kathrein antennas
• Documentation and protocolling of antenna installation parameters in a report file
• Easy ALD software updates
• USB and WIFI interface for communication and data exchange
Benefits:
• No external power supply and no PC required for operation
• No additional software needed
• Sunlight visible touchscreen display
• Operation via WIFI through any default mobile device with standard internet browser
• Connection with laptop via USB possible
• Storage of antenna configuration files
Specifications
Connector to RCU/TMA
Input voltage of ALC
Display
Tilt sensor
Output voltage to
RCU’s/TMA’s
Output power
(power supply to
RCU’s/TMA’s)
Current monitoring
measurement level
Over-current protection
Interface to RCU/TMA
Protocol to RCU/TMA
1 x 8 pin connector according to IEC 60130-9,
female, conforms to AISG RF-connector (SMB male)
20–30 VDC
Touchscreen, sunlight visible
Measuring range 80°, accuracy 1°
AISG female pin 6 (24 VDC): 20–30 VDC
AISG female pin 1 (12 VDC): 10–15 VDC
RF male (at 24 VDC):
10–30 VDC
RF male (at 12 VDC):
10–15 VDC
AISG female pin 6 (24 VDC)
without load on pin 1 (12 VDC) and on RF-plug: 15W
AISG female pin 1 (12 VDC)
with max. 7.5W load on pin 6 (24 VDC) and/or on RF-plug: 7.5W
Per branch (12V, 24V, RF): 10–1500 mA
Per branch (12V, 24V, RF): 1500 mA
RS485 / power supply / RF connector (SMB male)
HDLC hex-coded command set
conforms to AISG 1.1 and 3GPP / AISG 2.0
Interface
W-LAN (802.11n),USB 1.1/2.0
Max. number
9/1 pcs (depending on system configuration
of RCU’s/TMA’s
and length of control cable)
Max. length of control cable 656 ft (200 m) / 9 RCUs (daisy chain configuration)
492 ft (150 m) / 6 RCUs (splitter configuration)
Internal memory
380 MB
Power supply
LiPo-battery (14.8 V, .2000mAh)
Temperature range (operating) -20°C to +45°C
Temperature range (charging) 0°C to +30°C
Protection class
IP 54
Weight
2.2 lb (1 kg)
Dimensions
10.4 x 4 x 1.5 inches (265 x 102 x 37 mm)
Shipping dimensions
15.7 x 11 x 3.3 inches (400 x 280 x 85 mm)
Hand tighten only! Torque setting: 0.37–0.73 lb ft (0.5–1.0 Nm).
Switchable with software.
Standards
Certifications
EN 60950-22
EN 55022
EN 55024
CE
FCC part 15 Class B
UL (for external power adapter)
11424-B
936.4424/b
193
860 10156
Remote Electrical Tilt
Antenna Line Configurator
KATHREIN
860 10156
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Order Information
Model
860 10156
194
Description
Antenna line configurator
Charger/external power supply
USB cable
RET cable
HF cable (SMB / 7-16)
uick Guide
Carrying case
Remote Electrical Tilt
860 10002
Remote Control Signal Splitter
Up to three branches of RCUs may be powered and
controlled via one control cable using the 860 10002.
Specifications
Connectors
4 x 8 pin connector
according IEC 60130-9, 1 male, 3 female
tightening torque for
attaching connectors
Rated current
Maximum voltage
Protection class
Weight
Dimensions
0.4–0.7 ft-lbf
hand tighten only
3 A (at 50°C)
60 V
IP 65
0.55 lb (250 g)
4.1 x 3.6 x 2.8 inches
(103 x 91 x 72 mm)
Shipping weight
1.1 lb (500 g)
Shipping dimensions
4.6 x 4.6 x 4.5 inches
(117 x 117 x 114 mm)
Mounting
Mounting for 2 to 5.7 inch (50 to 145 mm)
OD masts is supplied.
Wall mounting using customer supplied
screws.
Connectors must be located at the bottom. No inverted mounting.
Input
(male)
Output 1
(female)
Output 2
(female)
Output 3
(female)
Supplied Mounting Clamp
131 1847
Mounting Options
Model
Description
Mounting for 2 to 5.7 inch (50 to 145 mm) OD masts is supplied.
Wall mounting using customer supplied screws.
Connectors must be located at the bottom.
No inverted mounting.
10730-F
936.2226/g
195
860 10030
Remote Electrical Tilt
Lightning Protection Device
The Lightning Protection Device (LPD) is designed for lightning
protection of control cables carrying partial lightning currents up
to 25 kA (shield) and 2.5 kA (inner conductor), according to IEC
61643-1, IEC 61312-3. Each pin is protected individually.
For outdoor and indoor use.
Specifications
Connectors
2 x 8 pin connector
according to IEC 60130-9,
input: male, output: female
tightening torque for
attaching connectors
SPD-Type
Max impulse current
0.4–0.7 ft-lbf
hand tighten only
8 x bipolar gas tube
25 kA (housing, shield) , (10/350 Ps)
inner conductors: 2.5 kA/pin (10/350 Ps)
700 V
Max dynamic overvoltage
at spark gap (1 kV/Ps)
Static Overvoltage
(100 V/s)
Grounding
100 V
Via mounting plate / clamps at metallic
surfaces or separate cable,
min. cross-section 5 mm2 Cu (screw M6)
Max operation current
4 A (at 50°C)
Max operation voltage
60 V
Weight
0.55 lb (250 g)
Dimensions
4.1 x 3.6 x x 2.8 inches
(103 x 91 x 72 mm)
Shipping weight
1.1 lb (500 g)
Shipping dimensions
4.6 x 4.6 x 4.5 inches
(117 x 117 x 114 mm)
Mounting
Mounting for 2 to 5.7 inch (50 to 145 mm)
OD masts is supplied.
Wall mounting using customer supplied M4
screws.
Connectors must be located at the bottom. No inverted mounting.
No decoupling elements are integrated. The coordination with
additional LPD s (device input) should be checked according to
IEC 61312.
Grounding of the device via the mounting plate at metallic surfaces
or via additional grounding cable (not included).
Important: A control cable with a minimum length of 2 meters is
required between the Lightning Protection Device and the Central
Control Unit at the BTS to achieve the required decoupling.
Supplied Mounting Clamp
131 1847
Mounting Options
Model
Description
Mounting for 2 to 5.7 inch (50 to 145 mm) OD masts is supplied.
Wall mounting using customer supplied M4 screws.
Connectors must be located at the bottom.
No inverted mounting.
196
10776-E
936.2367/e
Remote Electrical Tilt
782 1105n and 782 1106n
Smart Bias Tee
The Smart Bias Tee combines the performance of a
standard Bias Tee (e.g. type 78210577) with the function
of an additional modem (AISG standard) in order to
provide either DC voltage as well as remote control
signals via an RF feeder cable to a TMA or RCU.
782 11053
782 11054
782 11055
782 11056
The Smart Bias Tee provides low RF signal insertion loss
from port 1 to port 2 and vice versa.The measures taken
to protect against static discharge and lightning ensure a
high level of reliability and operational safety.
782 11063
782 11064
782 11065
782 11066
• 78211053, 78211063: +8–14 VDC (DC on pin1) version
for use near the BTS, in order to feed-in DC voltage
and RCU control signals into a feeder cable
• 78211054, 78211064: +8–14 VDC (DC on pin1) version
for use near the antenna, in order to control an RCU
(only required if no TMA is in use)
• 78211055, 78211065: +8–30 VDC (DC on pin6) version
for use near the BTS, in order to feed-in DC voltage
and RCU control signals into a feeder cable
• 78211056, 78211066: +8–30 VDC (DC on pin6) version
for use near the antenna, in order to control an RCU
(only required if no TMA is in use)
General Specifications
Frequency range
Impedance
VSWR
Insertion loss
Port 1lPort 2
Isolation
for DC and RCU signals
Port 1lPort 2
Port 1lPort DC/RCU
Port 2lPort DC/RCU
Intermodulation (2x20w)
Power consumption
Lightning protection
Operating temperature
Modem carrier frequency
IP rating
Certification
Devices
Dimensions
Weight
Shipping dimensions
690–2700 MHz
50 ohms
1.1:1 (690–2700 MHz)
0.1 dB (690–2700 MHz)
70 dB
70 dB
0 dB
IM3: -160 dBc
Typically 0.6 watt
3 kA, 10/350 Ps pulse
-40° to +60° C
2.176 MHz
IP 66 (indoors or outdoors)
FCC 15.107 Class B Computing
5.5 x 3.2 x 1.8 inches
(140.5 x 81 x 46 mm)
1.8 lb (0.8 kg)
6.6 x 4 x 3.4 inches
(167 x 102 x 86 mm)
Abbreviations:
RCU Remote Control Unit for remote
electrical control of antenna tilt
BTS
Base Transceiver Station
TMA
Tower Mounted Amplifier
AISG
Antenna Interface Standards Group
Port 1
Port for BTS or for Antenna
Port 2
Port for Feeder Cable
Port DC/RCU Port for DC voltage and
remote control unit signals
Specifications
Connectors
Port 1: 7-16 DIN male
Port 2: 7-16 DIN female
Connectors
Port 1: 7-16 DIN female
Port 2: 7-16 DIN male
Maximum input power
Port 1 or Port 2
Port DC/RCU
782 11053
8–14VDC/BTS
BTS
Feeder
782 11063
8–14VDC/BTS
BTS
Feeder
2.5 A / +8 – +14 VDC
782 11054
8–14VDC/Antenna
Antenna
Feeder
782 11064
8–14VDC/Antenna
Antenna
Feeder
782 11055
8–30VDC/BTS
BTS
Feeder
782 11065
8–30VDC/BTS
BTS
Feeder
750 watts (690–2700 MHz)
2.5 A / +8 – +14 VDC
2.5 A / +8 – +30 VDC
782 11056
8–30VDC/Antenna
Antenna
Feeder
782 11066
8–30VDC/Antenna
Antenna
Feeder
2.5 A / +8 – +30 VDC
11254-B
936.3819/e
197
782 1105n and 782 1106n
Remote Electrical Tilt
Smart Bias Tee
l
i
li
ti
l
ort 1
ntenna
7 211054
or
7 211056
ort 2
ee er
ort
ort 2
ee er
ort
7 21105
or
7 211055
7 21105
or
7 211055
ort 1
t
t
1
it
ort 1
ntenna
t
t
tT
t
1
it
t
t
i T
ort
7 211064
or
7 211066
ort 2
ee er
ort 2
ee er
7 21106
or
7 211065
ort 1
198
ort
7 21106
or
7 211065
t
1
it
t
t
tT
t
t
1
it
t
t
i T
Remote Electrical Tilt
782 1105n and 782 1106n
Smart Bias Tee
3.2 inches
(81 mm)
1.8 inches
(46 mm)
KATHREIN
782 11053, 782 11054
782 11055, 782 11056
782 11063, 782 11064
782 11065, 782 11066
Tested To Comply
With FCC Standards
5.5 inches
(140.5 mm)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Please note:
The Smart Bias Tees are designed to operate under the
environmental conditions as described in ETS 300 0191-4 class 4.1 E and have passed environmental tests as
recommended
in ETS 300 019-2-4.
i
ti
The installation team must be properly qualified and also
be familiar with the relevant national safety regulations.
The coupling torque at 7-16 connectors is 18.5–22 ft-lbf!
Hold the smart bias tee housing securely while tightening
the 7-16 locking nut. The tightning torque for fixing the
AISG connector must be 0.4–0.7 ft-lbf ( hand-tightened’).
Order Information
Model
782 11053
782 11054
782 11055
782 11056
782 11063
782 11064
782 11065
782 11066
Description
Smart Bias Tee
Smart Bias Tee
Smart Bias Tee
Smart Bias Tee
Smart Bias Tee
Smart Bias Tee
Smart Bias Tee
Smart Bias Tee
8–14VDC/BTS
8–14VDC/Antenna
8–30VDC/BTS
8–30VDC/Antenna
8–14VDC/BTS
8–14VDC/Antenna
8–30VDC/BTS
8–30VDC/Antenna
199
782 10577, 782 10578
Remote Electrical Tilt
Bias Tee
782 10577: The Bias Tee is suitable to feed DC voltage into the feeder
cable of a receiving and/or transmitting antenna system in order to
provide the operating voltage for a mast head amplifier.
• The Bias Tee provides low RF signal insertion loss from the BTS to
the antenna port and vice versa.
• The DC voltage is fed from the DC port to the antenna port while
providing a high level of DC isolation from the DC to the BTS port
and from the antenna to the BTS port.
• The measures taken to protect against static discharge and
lightning ensure a high level of reliability and operational safety.
782 10578: The Bias Tee is suitable to feed DC voltage and AISG control
signals into the feeder cable in order to provide operating voltage
and control signals via theRF feeder cable to the TMA or RCU.
• The Bias Tee provides low RF signal insertion loss from the BTS to
the antenna port and vice versa.
782 10577
• The DC voltage and AISG control signal (2.176 MHz) is fed from
the DC port to the antenna port while providing a high level of DC
isolation from the DC to the BTS port and from the antenna to the
BTS port.
• The measures taken in conjunction with the CCU-LOC to protect
against static discharge and lightning ensure a high level of
reliability and operational safety.
Specifications
782 10578
Frequency range
Impedance
VSWR
Insertion loss
Port 1lPort 2
Isolation
Port 1lPort 2
Port 1lDC
Maximum input power
Port 1
DC
Intermodulation (2x20w)
Lightning protection
Operating temperature
Connectors
Port 1 (BTS)
Port 2 (Antenna)
Port DC
IP rating
Dimensions
690–2700 MHz
50 ohms
1.1:1 (690–2700 MHz)
0.1 dB (690–2700 MHz)
70 dB
70 dB
250 watts (690–2700 MHz)
1 A / 0 to +30 VDC
IM3: -160 dBc
3 kA, 10/350 Ps pulse
-40° to +70° C
7-16 DIN male
7-16 DIN female
SMA female
IP 66 (indoors or outdoors)
3.4 x 1.8 x 1.8 inches
(85.4 x 46.2 x 45 mm)
Weight
1 lb (0.47 kg)
Shipping dimensions
5 x 3.5 x 3 inches
(128 x 88 x 75 mm)
See reverse for order information.
200
11376-A
936.3769
936.3771
Remote Electrical Tilt
782 10577, 782 10578
Bias Tee
782 10577
Application Example
782 10578
Application Example
Order Information
Model
782 10577
782 10578
Description
Bias Tee
Bias Tee (AISG)
201
782 10429
Remote Electrical Tilt
Bias Tee
The Bias Tee is suitable to feed DC voltage and AISG
control signals into thefeeder cable in order to provide
operating voltage and control signals via theRF feeder
cable to the TMA or RCU.
• The Bias Tee provides low RF signal insertion loss from
the BTS to the antenna port and vice versa.
• The DC voltage and AISG control signal (2.176 MHz) is
fed from the DC port to the antenna port while providing
a high level of DC isolation from the DC to the BTS port
and from the antenna to the BTS port.
793 304
Bias Tee
Bias Tee
800–2170
MHz
800–2170 MHz
Antenna
BTS
Antenna
BTS
DC
DC/AISG
• The measures taken in conjunction with the CCU-LOC
to protect against staticdischarge and lightning ensure a
high level of reliability and operational safety.
Specifications
Frequency range
Impedance
VSWR
Insertion loss
BTSlAntenna
Isolation
BTSlAntenna
BTSlDC/AISG
Input power
BTS
DC/AISG
Intermodulation (2x20w)
Lightning protection
Operating temperature
Connectors
Port 1 BTS
Port 2 Antenna
Port DC/AISG
Application
Dimensions
Weight
Shipping dimensions
Application Example
202
10995-B
936.2831/a
800–2170 MHz
50 ohms
1.1:1 (800–2170 MHz)
0.1 dB (800–2170 MHz)
70 dB (DC)
70 dB (DC)
250 watts (800–2170 MHz)
1.8 A / 13 VDC
0.8 A / 29 VDC
IM3: -160 dBc
3 kA, 10/350 Ps pulse
-40° to +70° C
7/16 DIN male
7/16 DIN female
SMB male
Indoor
3.5 x 1.9 x 1.3 inches
(88 x 47 x 35.4 mm)
1.3 lb (0.6 kg)
5.7 x 5.7 x 2 inches
(145 x 145 x 50 mm)
Remote Electrical Tilt
793 304
Bias Tee
The Bias Tee is used to feed DC voltage into the feeder
cable of a receiving and/or transmitting antenna system
to provide the operating voltage for a tower mounted
amplifier.
Design and construction
• The Bias Tee provides low RF signal insertion loss from
the BTS to the antenna port and vice versa.
• The DC voltage is fed from the DC port to the antenna
port while providing a high level of DC isolation from the
DC to the BTS port and from the antenna to the BTS port.
• The measures taken to protect against static discharge
and lightning ensure a high level of reliability and
operational safety.
• For indoor use.
Specifications
Frequency range
Impedance
VSWR
Insertion loss
BTSlAntenna
Isolation
BTSlAntenna
BTSlDC
Maximum input power
BTS
DC
Intermodulation (2x20w)
Lightning protection
Operating temperature
Connectors
BTS
Antenna
DC
Dimensions
Weight
Shipping dimensions
800–2170 MHz
50 ohms
1.1:1 (800–2170 MHz)
0.1 dB (800–2170 MHz)
70 dB (DC)
70 dB (DC)
250 watts (800–2170 MHz)
1000 mA / 0–+30 VDC
IM3: -160 dBc
5 kA, 8/20 Ps pulse
-40° to +70° C
7-16 DIN male
7-16 DIN female
SMB male
3.5 x 1.9 x 1.3 inches
(88 x 47 x 35.4 mm)
1.3 lb (0.6 kg)
5.7 x 5.7 x 2 inches
(145 x 145 x 50 mm)
Application Example
10727-C
936.1953/b
203
793 301
Remote Electrical Tilt
DC Stop
The DC Stop is used in dual or multi-band antenna systems
where one or more antenna systems require a DC supply
for an installed mast head amplifier. The DC Stop prevents
DC voltage from being shorted within the nonbiased
antenna system(s) and isolates the corresponding base
station output(s) from DC voltage.
Design and construction
The DC Stop provides low RF signal insertion loss and high
DC signal isolation from port 1 to port 2 and vice versa.
For indoor or outdoor use (IP 67).
Specifications
Frequency range
Impedance
VSWR
Insertion loss Port 1lPort 2
Isolation Port 1lPort 2
Maximum input power
Intermodulation (2x20w)
Operating temperature
Connectors
Port 1
Port 2
Dimensions
Weight
Application Example
204
10703-E
936.1954/d
800–2170 MHz
50 ohms
1.1:1 (800–2000 MHz)
1.2:1 (2000–2170 MHz)
0.1 dB (800–2170 MHz)
70 dB (DC)
750 watts (800–2170 MHz)
IM3: -160 dBc
-40° to +70° C
7-16 DIN male
7-16 DIN female
2.8 x 1.6 x 1.3 inches
(70 x 40 x 32 mm)
0.7 lb (0.32 kg)
NEW
Remote Electrical Tilt
782 10850V01
DC Stop
The DC Stop is used in dual or multi-band antenna systems
where one or more antenna systems require a DC supply for
an installed mast head amplifier. The DC Stop prevents DC
voltage from being shorted within the nonbiased antenna
system(s) and isolates the corresponding base station
output(s) from DC voltage.
• Low RF signal insertion loss
• High DC signal isolation from port 1 to port 2 and vice versa
• Isolation of AISG signals
• Suitable for indoor or outdoor applications
Specifications
Insertion loss Port 1lPort 2
Isolation Port 1lPort 2
Maximum input power
Intermodulation (2x20w)
Operating temperature
Application
Connectors
Port 1
Port 2
Dimensions
Weight
250–2700 MHz
50 ohms
1.5:1 (250–380 MHz)
1.25:1 (380–690 MHz)
1.1:1 (380–690 MHz)
0.1 dB (690–2700 MHz)
DC Stop
23 dB (AISG 2.176 MHz)
750 watts (250–2700 MHz)
IM3: -160 dBc
-40° to +70° C
Indoor or outdoor (IP 67)
7-16 DIN male
7-16 DIN female
2.8 x 1.6 x 1.3 inches
(70.4 x 39.5 x 32 mm)
0.7 lb (0.32 kg)
70 4
M29 1 5
7 210 50 01
to
250–2700 MHz
2
95
Frequency range
Impedance
VSWR
11457-A
936.4513
205
840 104nn Series
Remote Electrical Tilt
Remote Control Cable
The Kathrein remote control cables are made with connectors to match
the Kathrein Remote Control Unit (RCU), Signal Splitter, and Central
Control Unit (CCU).
Specifications
Connectors
2 x 8 pin
IEC 60130-9, female/male
0.4–0.7 ft-lbf
hand tighten only
Shielded
1 x twisted pair 100 :/1 MHz
2 x power supply, 1 x ground
AWM style 20317 I/II A/B + 20549 + 20233
4 A (power supply) (at 50°C)
-40° to +80° C (fixed position)
IP 67 (connected)
0.3 inch (8 mm)
VL 1581
VW-1
CSA
FT-1
Tightening torque for
attaching connectors
Construction
Rated current
Temperature range
Protection class
Cable diameter
Flammability
Minimum bending radius
one time
2.4 inches (60 mm)
several times
4.8 inches (120 mm)
The male and female connectors of all Kathrein RET products are compatible componets designed to operate under the environmental conditions as
described in ETS 300 019-1-4 class 4.1 E.
&EMALE
PIN assigment per AISG
-ALE
1
+13 V DC (+12 V DC nominal)
2
not used
3
RS485 B
4
not used
5
RS485 A
6
+29 V DC (+24 V DC nominal)
7
DC Return
8
not used
Order Information
Model
840 10407
840 10408
840 10409
840 10410
840 10432
840 10411
840 10412
840 10433
840 10413
840 10414
840 10415
840 10453
840 10454
840 10455
840 10451
840 10452
206
10728-I
Length
3.3 ft
6.6 ft
16.4 ft
32.8 ft
65.6 ft
82.7 ft
131.2 ft
164 ft
196.9 ft
262.5 ft
328.1 ft
344.5 ft
360.9 ft
377.3 ft
492.1 ft
656.2 ft
(1 m)
(2 m)
(5 m)
(10 m)
(20 m)
(25 m)
(40 m)
(50 m)
(60 m)
(80 m)
(100 m)
(105 m)
(110 m)
(115 m)
(150 m)
(200 m)
Note: See chart on the following page showing maximum total
control cable lengths allowed for various numbers of RCUs
Remote Electrical Tilt
840 104nn Series
Remote Control Cable
207
GC-1
Remote Electrical Tilt
Grounding Clamp
• Designed for lightning protection of control cables used with the
Kathrein RCU (Remote Control Unit)
• Includes grounding cable with attached lug, one roll of butyl rubber
tape, one roll of PVC tape, and hardware.
Specifications
Maximum lightning current
Protection class
Grounding
Nominal size
Bonding conductor jacket
material type
Grounding strap material
Waterproofing method
20 kA (pulse 10/350 Psec)
IP 68
Via stranded grounding wire
6 gauge, length 24 inches,
2-hole lug terminal (3/8 in. lug) attached
1
/4 or 3/8 inch
PE
Copper
Butyl rubber and PVC tape
Note: The grounding kit is only suitable for use with Kathrein
power supply and signal cables:
840 10407
840 10408
840 10409
840 10410
840 10432
840 10411
840 10412
840 10433
840 10413
840 10414
840 10415
840 10453
840 10454
840 10455
840 10451
840 10452
2.2–2.3 inches
208
10925-C
Other Directional Antennas
Bi-Directional Multiband
Frequency
Gain
Model
Polarization
Maximum
Input Power
Connector
Page
790–960 MHz
1710–1880 MHz
1880–2170 MHz
5 dBi
5.5 dBi
6.5 dBi
738 445
V
200 watts
7-16 DIN
211
790–960 MHz
1710–1880 MHz
1880–2690 MHz
5 dBi
5.5 dBi
6.5 dBi
738 446
V
200 watts
N female
211
Log Periodic
Frequency
Gain
Model
Polarization
Connector
Length
790–2690 MHz
11 dBi
742 192V01
V
7-16 DIN
30.9 inches
Page
212
806–960 MHz
10 dBi
CL-900B
H or V
N female
29 inches
221
Frequency
Gain
Model
Polarization
Connector
Length
806–869 MHz
12 dBi
TY-840
H or V
N female
24.5 inches
213
824–894 MHz
12 dBi
TY-860
H or V
N female
24.25 inches
213
890–960 MHz
12 dBi
TY-900
H or V
N female
23 inches
213
806–869 MHz
12 dBi
RY-840B
H or V
N female
29 inches
215
824–894 MHz
12 dBi
RY-860B
H or V
N female
29 inches
215
890–960 MHz
12 dBi
RY-900B
H or V
N female
29 inches
215
790–986 MHz
1710–2170
13 dBi
13 dBi
800 10828v01 +45° and -45° 7-16 DIN
46.6 inches
222
Frequency
Gain
Model
Polarization
Connector
Width
890–960 MHz
16 dBi
MF-900B
V
N female
46.5 inches
219
928–953 MHz
16 dBi
MF-940B
V
N female
46.5 inches
219
940–960 MHz
16 dBi
MF-950B
V
N female
46.5 inches
219
806–869 MHz
18 dBi
PR-850
H or V
N female
68 inches
217
890–960 MHz
18 dBi
PR-900
H or V
N female
68 inches
217
940–960 MHz
18 dBi
PR-950
H or V
N female
68 inches
217
Yagi
Page
Half-Parabolic
Page
Other Directional
Antennas
209
Other Directional
Antennas
Other Directional Antennas
210
738 445, 738 446
Bi-Directional Dual Band Antenna
Dual Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 2
790–960
V
65°
0°
1710–2170
V
65°
0°
Specifications
Frequency range
Gain
790–960 MHz
1710–1880 MHz
1880–2170 MHz
Impedance
VSWR
790–806 MHz
806–824 MHz
824–960 MHz
1710–2170 MHz
Polarization
Maximum input power
Connector
Weight
Dimensions
Wind load
Front/Side/Rear
Wind survival rating
Shipping dimensions
Shipping weight
2.2 inches
(55 mm)
15.7 inches
(400 mm)
790–960 MHz
1710–2170 MHz
5 dBi
5.5 dBi
6.5 dBi
50 ohms
2.2:1
1.7:1
1.5:1
1.5:1
Vertical
200 watts (at 50°C)
N or 7-16 DIN female
1.8 lb (.8 kg)
15.7 x 7.4 x 2.2 inches
(400 x 188 x 55 mm)
at 93 mph (150kph)
6 lbf / 15 lbf / 8 lbf
(25 N) / (65 N) / (35 N)
120 mph (200 kph)
16.6 x 8.3 x 3.7 inches
(422 x 212 x 95 mm)
2.6 lb (1.2 kg)
7.4 inches
(188 mm)
14.6 inches
(371 mm)
790–960 MHz
H-plane
Horizontal pattern – V-polarization
E-plane
Vertical pattern – V-polarization
1710–2170 MHz
H-plane
Horizontal pattern – V-polarization
Mounting E uipment
Model
Description
2 x 131 1847
Mounting Kit for 2 to 5.7 inch
(optional)
(50 to 145 mm) OD mast.
Wall mounting using customer supplied hardware.
Reference the Mechanical Accessories section.
Order Information
Model
738 445
738 446
Description
Antenna with 7-16 DIN connector
Antenna with N connector
E-plane
Vertical pattern – V-polarization
10700-E
936.1870/e
211
742 192V01
Wide Band Log–Periodic Antenna
Mounting Clamps Included
Antenna 1
Wide Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
790–2690
V
60°
0°
Specifications
Frequency range
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Connector
Weight
Dimensions
790–1000 MHz
10
10
30
0o
90o
12
0o
0o
24
270o
90o
0o
180o
0o
21
0o
0o
15
0o
H-Plane
Horizontal pattern
Vertical - polarization
Shipping weight
Mounting
12
0o
24
15
21
Wind survival rating
Shipping dimensions
30
270o
180o
o
60
20
30
E-Plane
Vertical pattern
Vertical - polarization
1000–1700 MHz
0o
12
0o
0o
24
270o
90o
12
0o
0o
20
960–1710 MHz
11 dBi
60° (halfpower)
50° (halfpower)
25 dB
250 watts (at 50°C)
90o
12
0o
0o
24
180o
H-Plane
Horizontal pattern
Vertical - polarization
1710–2200 MHz
11.2 dBi
55° (halfpower)
47° (halfpower)
25 dB
200 watts (at 50°C)
500 watts
3
270o
90o
12
0o
0o
24
180o
E-Plane
Vertical pattern
Vertical - polarization
2200–2490 MHz
11 dBi
50° (halfpower)
45° (halfpower)
22 dB
170 watts (at 50°C)
2490–2690 MHz
10.8 dBi
50° (halfpower)
45° (halfpower)
25 dB
150 watts (at 50°C)
11.8 inches
(300 mm)
Mounting
212
11286-A
936.3956/b
6.1 inches
(155 mm)
o
60
20
o
790–960 MHz
10.8 dBi
65° (halfpower)
53° (halfpower)
25 dB
300 watts (at 50°C)
0o
0
15
E-Plane
Vertical pattern
Vertical - polarization
270o
o
180o
30
30
0
15
21
0o
24
0o
o
H-Plane
Horizontal pattern
Vertical - polarization
o
60
30
15
0
15
21
0o
0o
21
0o
90o
Gain
Horizontal beamwidth
Vertical beamwidth
Front-to-back ratio
Input power maximum
total
6
30
30
270o
Specifications
0o
20
30
180o
30
o
30
o
20
30
0o
10
10
10
o
60
0o
0o
3
33
30
3
0o
0o
10
1700–2690 MHz
0o
33
0o
3
33
0o
33
0o
30
o
o
60
20
21
0o
0o
3
30
o
30
Wind load
Front/Side/Rear
0o
30
o
0o
30
o
33
3
0o
33
0o
790–2690 MHz
50 ohms
1.5:1
IM3: -150 dBc
Vertical
7-16 DIN female
12.1 lb (5.5 kg)
30.9 x11.8 x 6.1 inches
(785 x 300 x 155 mm)
at 93 mph (150kph)
5 lbf / 59 lbf / 7 lbf
(20 N) / (260 N) / (30 N)
120 mph (200 kph)
39.37 x 14.2 x 6.9 inches
(1000 x 360 x 175 mm)
13.7 lb (6.2 kg)
Hardware included for masts of
1.25 to 2.75 inch (30 to 70 mm) OD.
30.9 inches
(785 mm)
TY-840, TY-860, TY-900
Yagi Antenna
Mounting Clamps Included
Single Band (MHz)
Single Polarization
HPBW (V-Pol)
Electrical Downtilt
Specifications:TY-840
Frequency range Gain
Impedance VSWR Polarization Front-to-back ratio Maximum input power H-plane beamwidth E-plane beamwidth Connector
Weight Dimensions 806–869 MHz 12 dBi
50 ohms
< 1.5:1 maximum
(1.35:1 typical)
Horizontal or vertical
>18 dB
100 watts (at 50°C) 59 degrees (half-power)
48 degrees (half-power)
N female
2.9 lb (1.3 kg) 24.5 x 8.375 inches
(622 x 213 mm)
Wind load at 93 mph (150kph)
Front/Side
Wind survival rating Shipping dimensions 3 lbf / 4 lbf
(11 N) / (17 N)
120 mph (200 kph)
28 x 10 x 4.5 inches
(710 x 254 x 114 mm)
5.0 lb (2.3 kg)
Shipping weight See the next page for mounting and order information.
TY-840
TY-860
TY-900
806–869
H or V
59°
0°
824–894
H or V
59°
0°
890–960
H or V
48°
0°
TY-860
824–894 MHz
12 dBi
50 ohms
< 1.5:1 maximum
(1.35:1 typical)
Horizontal or vertical
>18 dB
100 watts (at 50°C)
59 degrees (half-power)
48 degrees (half-power)
N female
3 lb (1.4 kg)
24.25 x 8 inches
(616 x 203 mm)
TY-900
890–960 MHz
12 dBi
50 ohms
< 1.5:1 maximum
(1.35:1 typical)
Horizontal or vertical
>20 dB
100 watts (at 50°C)
48 degrees (half-power)
40 degrees (half-power)
N female
3 lb (1.4 kg)
23 x 7 inches
(584 x 178 mm)
3 lbf / 4 lbf
(11 N) / (17 N)
120 mph (200 kph)
28 x 10 x 4.5 inches
(710 x 254 x 114 mm
5.0 lb (2.3 kg)
3 lbf / 4 lbf
(11 N) / (17 N)
150 mph (240 kph)
28 x 10 x 4.5 inches
(710 x 254 x 114 mm)
5.0 lb (2.3 kg)
TY-840
TY-860
TY-900
H-plane
Horizontal pattern – V-polarization
Vertical pattern – H-polarization
H-plane
Horizontal pattern – V-polarization
Vertical pattern – H-polarization
H-plane
Horizontal pattern – V-polarization
Vertical pattern – H-polarization
E-plane
Horizontal pattern – H-polarization
Vertical pattern – V-polarization
E-plane
Horizontal pattern – H-polarization
Vertical pattern – V-polarization
E-plane
Horizontal pattern – H-polarization
Vertical pattern – V-polarization
(Shown vertically polarized)
10060-E
10065-E
10061-E
213
TY-840, TY-860, TY-900
Yagi Antenna
TY-840
24.5 inches
(622 mm)
8.375 inches
(213 mm)
TY-860
24.25 inches
(616 mm)
8 inches
(203 mm)
TY-900
23 inches
(584 mm)
Mounting Information
Description
For masts of 1.25 to 2.375 inch (32 to 60 mm) OD.
Order Information:
7 inches
(178 mm)
214
ModelDescription
TY-840
Yagi antenna 806–869 MHz
TY-860
Yagi antenna 824–894 MHz
TY-900
Yagi antenna 890–960 MHz
RY-840B, RY-860B, RY-900B
Radome Protected Yagi Antenna
Single Band (MHz)
Single Polarization
HPBW (V-Pol)
Electrical Downtilt
Specifications:RY-840B
Frequency range Gain
Impedance VSWR 806–869 MHz 12 dBi
50 ohms
< 1.5:1 maximum
(1.35:1 typical)
Horizontal or vertical
>18 dB
100 watts (at 50°C) 58 degrees (half-power)
48 degrees (half-power)
N female
16.0 lb (7.3 kg)
29 x 17 x 12 inches
(737 x 432 x 305 mm)
Polarization Front-to-back ratio Maximum input power H-plane beamwidth E-plane beamwidth Connector
Weight Dimensions Wind load at 93 mph (150kph)
Side/Top/Rear
Wind survival rating Shipping dimensions 63 lbf / 16 lbf / 37 lbf
(279 N) / (69 N) / (164 N)
120 mph (200 kph)
31 x 20 x 14.5 inches
(787 x 508 x 368 mm)
28.0 lb (12.7 kg)
Shipping weight See the next page for mounting and order information.
RY-840B
RY-860B
RY-900B
806–869
H or V
59°
0°
824–894
H or V
59°
0°
890–960
H or V
48°
0°
RY-860B
824–894 MHz
12 dBi
50 ohms
< 1.5:1 maximum
(1.35:1 typical)
Horizontal or vertical
>18 dB
100 watts (at 50°C)
58 degrees (half-power)
44 degrees (half-power)
N female
16.0 lb (7.3 kg)
29 x 17 x 12 inches
(737 x 432 x 305 mm)
RY-900B
890–960 MHz
12 dBi
50 ohms
< 1.5:1 maximum
(1.35:1 typical)
Horizontal or vertical
>20 dB
100 watts (at 50°C)
48 degrees (half-power)
40 degrees (half-power)
N female
16.0 lb (7.3 kg)
29 x 17 x 12 inches
(737 x 432 x 305 mm)
63 lbf / 16 lbf / 37 lbf
(279 N) / (69 N) / (164 N)
120 mph (200 kph)
31 x 20 x 14.5 inches
(787 x 508 x 368 mm)
28.0 lb (12.7 kg)
63 lbf / 16 lbf / 37 lbf
(279 N) / (69 N) / (164 N)
120 mph (200 kph)
31 x 20 x 14.5 inches
(787 x 508 x 368 mm)
28.0 lb (12.7 kg)
RY-840B
RY-860B
RY-900B
H-plane
Horizontal pattern – V-polarization
Vertical pattern – H-polarization
H-plane
Horizontal pattern – V-polarization
Vertical pattern – H-polarization
H-plane
Horizontal pattern – V-polarization
Vertical pattern – H-polarization
E-plane
Horizontal pattern – H-polarization
Vertical pattern – V-polarization
E-plane
Horizontal pattern – H-polarization
Vertical pattern – V-polarization
E-plane
Horizontal pattern – H-polarization
Vertical pattern – V-polarization
(Shown vertically polarized)
10057-H
10058-H
10064-H
215
RY-840B, RY-860B, RY-900B
Radome Protected Yagi Antenna
29 inches
(737 mm)
Top
12 inches
(305 mm)
Side
17 inches
(432 mm)
Order Information:
ModelDescription
RY-840B
Yagi antenna 806–869 MHz
RY-860B
Yagi antenna 824–894 MHz
RY-900B
Yagi antenna 890–960 MHz
Mounting Equipment:
ModelDescription
MKPS-1
Mounting Kit for 2.375 inch
(optional) (60 mm) OD mast.
MKPS-2
Mounting Kit for 2.875 inch
(optional) (73 mm) OD mast.
MKPS-3
Mounting Kit for 3.5 inch
(optional) (89 mm) OD mast.
MKPS-4
Mounting Kit for 4 inch
(optional) (102 mm) OD mast.
MKPS-5
Mounting Kit for 4.5 inch
(optional) (114 mm) OD mast.
Mounting Hardware Kit Required.
216
PR-850, PR-900, PR-950
High-Gain Half-Parabolic Antenna
PARAFLECTOR
Single Band (MHz)
Single Polarization
HPBW (V-Pol)
Electrical Downtilt
Specifications
Frequency range
Gain
Impedance
VSWR
Polarization
Front-to-back ratio
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Dimensions
PR-850
806–896 MHz
18 dBi
50 ohms
1.5:1
Horizontal or vertical
25 dB
100 watts (at 50°C)
12 degrees (half-power)
24 degrees (half-power)
N female
38 lb (17.2 kg)
68 x 36 x 18 inches
(1727 x 914 x 457 mm)
Wind load at 93 mph (150kph)
Front/Side
134 lbf / 72 lbf
(594 N) / (320 N)
Wind survival rating
100 mph (160 kph)
Shipping dimensions
40 x 36 x 7 inches
(1016 x 914 x 178 mm)
Shipping weight
47 lb (21.3 kg)
See the next page for mounting and order information.
PR-850
PR-900
PR-950
806–896
806–869
H or V
12°
0°
890–960
H or V
12°
0°
940–960
H or V
12°
0°
PR-900
890–960 MHz
18 dBi
50 ohms
1.5:1
Horizontal or vertical
23 dB
100 watts (at 50°C)
12 degrees (half-power)
24 degrees (half-power)
N female
38 lb (17.2 kg)
68 x 36 x 18 inches
(1727 x 914 x 457 mm)
PR-950
940–960 MHz
18 dBi
50 ohms
1.2:1
Horizontal or vertical
25 dB
100 watts (at 50°C)
12 degrees (half-power)
24 degrees (half-power)
N female
38 lb (17.2 kg)
68 x 36 x 18 inches
(1727 x 914 x 457 mm)
134 lbf / 72 lbf
(594 N) / (320 N)
100 mph (160 kph)
40 x 36 x 7 inches
(1016 x 914 x 178 mm)
47 lb (21.3 kg)
134 lbf / 72 lbf
(594 N) / (320 N)
100 mph (160 kph)
40 x 36 x 7 inches
(1016 x 914 x 178 mm)
47 lb (21.3 kg)
PR-850
PR-900
PR-950
H-plane
Horizontal pattern – V-polarization
Vertical pattern – H-polarization
H-plane
Horizontal pattern – V-polarization
Vertical pattern – H-polarization
H-plane
Horizontal pattern – V-polarization
Vertical pattern – H-polarization
E-plane
Horizontal pattern – H-polarization
Vertical pattern – V-polarization
E-plane
Horizontal pattern – H-polarization
Vertical pattern – V-polarization
E-plane
Horizontal pattern – H-polarization
Vertical pattern – V-polarization
PR-850 consists of:
1 x PRF-850 Feed assembly
1 x PRSA Screen assembly
PR-900 consists of:
1 x PRF-900 Feed assembly
1 x PRSA Screen assembly
PR-950 consists of:
1 x PRF-950 Feed assembly
1 x PRSA Screen assembly
PARAFLECTOR is a registered trademark of Kathrein Inc., Scala Division.
10054-I
10055-H
10056-I
217
PR-850, PR-900, PR-950
High-Gain Half-Parabolic Antenna
36 inches
(914 mm)
68 inches
(1727 mm)
18 inches
(457 mm)
(Shown vertically polarized)
Order Information
Model
PR-850
Description
Half-parabolic antenna 806–896 MHz
PR-900
PR-950
Half-parabolic antenna 890–960 MHz
Half-parabolic antenna 940–960 MHz
Mounting E uipment
Model
Description
2 x MKPX-2
Mounting Kit for 2.375 inch
(optional)
(60 mm) OD mast.
MKPX-9
Mounting Kit for 2.875 inch
(optional)
(73 mm) OD mast.
MKPX-10
Mounting Kit for 3.5 inch
(optional)
(89 mm) OD mast.
MKPX-11
Mounting Kit for 4 inch
(optional)
(102 mm) OD mast.
MKPX-12
Mounting Kit for 4.5 inch
(optional)
(114 mm) OD mast.
MKTB-1
Tilt Mount Kit, 8-39 degrees tilt angle.
(optional)
Used with any MKPX kit listed above.
Mounting Hardware Kit Required.
218
MF-900B, MF-940B, MF-950B
Medium-Gain Half-Parabolic Antenna
MINIFLECTOR
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
Specifications
Frequency range
Gain
Impedance
VSWR
Polarization
Front-to-back ratio
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Dimensions
MF-900B
890–960 MHz
16 dBi
50 ohms
1.5:1
Vertical
23 dB
100 watts (at 50°C)
16 degrees (half-power)
30 degrees (half-power)
N female
13 lb (5.9 kg)
44.9 x 17.8 x 16.8 inches
(1140 x 451 x 428 mm)
Wind load at 93 mph (150kph)
Front/Side
50 lbf / 28 lbf
(222 N) / (121 N)
Wind survival rating
120 mph (200 kph)
Shipping dimensions
47 x 18.5 x 16.5 inches
(1194 x 470 x 419 mm)
Shipping weight
20 lb (9.1 kg)
See the next page for order information.
MF-900B
MF-940B
MF-950B
890–960
V
16°
0°
928–953
V
16°
0°
940–960
V
16°
0°
MF-940B
928–953 MHz
16 dBi
50 ohms
1.4:1
Vertical
23 dB
100 watts (at 50°C)
16 degrees (half-power)
34 degrees (half-power)
N female
13 lb (5.9 kg)
44.9 x 17.8 x 16.8 inches
(1140 x 451 x 428 mm)
MF-950B
940–960 MHz
16 dBi
50 ohms
1.3:1
Vertical
23 dB
100 watts (at 50°C)
16 degrees (half-power)
34 degrees (half-power)
N female
13 lb (5.9 kg)
44.9 x 17.8 x 16.8 inches
(1140 x 451 x 428 mm)
50 lbf / 28 lbf
(222 N) / (121 N)
120 mph (200 kph)
47 x 18.5 x 16.5 inches
(1194 x 470 x 419 mm)
20 lb (9.1 kg)
50 lbf / 28 lbf
(222 N) / (121 N)
120 mph (200 kph)
47 x 18.5 x 16.5 inches
(1194 x 470 x 419 mm)
20 lb (9.1 kg)
MF-900B
MF-940B
MF-950B
H-plane
Horizontal pattern – V-polarization
H-plane
Horizontal pattern – V-polarization
H-plane
Horizontal pattern – V-polarization
E-plane
Vertical pattern – V-polarization
E-plane
Vertical pattern – V-polarization
E-plane
Vertical pattern – V-polarization
MF-900B consists of:
1 x MFF-900B Feed assembly
1 x MFSA Screen assembly
MF-940B consists of:
1 x MFF-940B Feed assembly
1 x MFSA Screen assembly
MF-950B consists of:
1 x MFF-950B Feed assembly
1 x MFSA Screen assembly
MINIFLECTOR is a registered trademark of Kathrein Inc., Scala Division.
1004310044-H
10045-
219
MF-900B, MF-940B, MF-950B
Medium-Gain Half-Parabolic Antenna
16.8 inches
(428 mm)
44.9 inches
(1140 mm)
(vertically polarized)
17.8 inches
(451 mm)
Order Information
Model
Description
MF-900B
MF-940B
Half-parabolic antenna 890–960 MHz
Half-parabolic antenna 928–953 MHz
Mounting E uipment
Model
Description
MKPX-2
Mounting Kit for 2.375 inch
(optional)
(60 mm) OD mast.
MKPX-3
Mounting Kit for 2.875 inch
(optional)
(73 mm) OD mast.
MKPX-4
Mounting Kit for 3.5 inch
(optional)
(89 mm) OD mast.
MKPX-5
Mounting Kit for 4 inch
(optional)
(102 mm) OD mast.
MKPX-6
Mounting Kit for 4.5 inch
(optional)
(114 mm) OD mast.
Mounting Hardware Kit Required.
Note: Contact Kathrein Scala Division Sales Engineering for
instructions regarding installation with horizontal polarization
using optional special hardware.
220
CL-900B
Radome Protected Log-Periodic Antenna
Antenna 1
Single Band (MHz)
Single Polarization
HPBW (V-Pol)
Electrical Downtilt
806–960
H or V
64°
0°
Specifications
Frequency range
Gain
Impedance
VSWR
Polarization
Front-to-back ratio
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Dimensions
806–960 MHz (broadband)
10 dBi
50 ohms
1.5:1
Horizontal or vertical
35 dB
500 watts (at 50°C)
64 degrees (half-power)
49 degrees (half-power)
N female
22 lb (10 kg)
29 x 17 x 12 inches
(737 x 432 x 305 mm)
Wind load at 93 mph (150kph)
Side/Top/Rear
63 lbf / 16 lbf / 37 lbf
(279 N) / (69 N) / (164 N)
Wind survival rating
120 mph (200 kph)
Shipping dimensions
31 x 20 x 14.5 inches
(787 x 508 x 368 mm)
Shipping weight
28.0 lb (12.7 kg)
(Shown vertically polarized)
29 inches
(737 mm)
Top
12 inches
(305 mm)
Side
17 inches
(432 mm)
H-plane
Horizontal pattern – V-polarization
Vertical pattern – H-polarization
E-plane
Horizontal pattern – H-polarization
Vertical pattern – V-polarization
Mounting E uipment
Model
Description
MKPS-1
Mounting Kit for 2.375 inch
(optional)
(60 mm) OD mast.
MKPS-2
Mounting Kit for 2.875 inch
(optional)
(73 mm) OD mast.
MKPS-3
Mounting Kit for 3.5 inch
(optional)
(89 mm) OD mast.
MKPS-4
Mounting Kit for 4 inch
(optional)
(102 mm) OD mast.
MKPS-5
Mounting Kit for 4.5 inch
(optional)
(114 mm) OD mast.
Mounting Hardware Kit Required.
10042-H
221
NEW
800 10828V01
Integrated Combiner
Mounting Clamps Included
Dual Band Radome Protected Yagi Antenna
Single Band (MHz)
Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 2
790–960
45°
38°
0°
1710–2170
-45°
28°
0°
Specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Connector
Maximum input power
Weight
Length
Radome diameter
Wind load
790–960 MHz
0°
60
20
°
30
0°
12
0°
°
270°
90°
0°
21
0°
0°
180°
Vertical pattern
+45°-polarization
Integrated combiner
1710–2170 MHz
0°
60
20
°
30
0°
0°
Gain
+45° polarization
horizontal beamwidth
+45° polarization
vertical beamwidth
Front-to-back ratio
The insertion loss is included in the given
antenna gain values.
790–870 MHz
13 dBi
38° (half-power)
870–960 MHz
14 dBi
32° (half-power)
38° (half-power)
32° (half-power)
25 dB
25 dB
12
0°
0°
24
180°
0°
15
0°
15
Horizontal pattern
-45°-polarization
90°
0°
12
0°
24
270°
21
90°
0°
°
30
270°
21
°
60
20
30
180°
3
10
10
30
Specifications
0°
30
0°
30
°
33
3
0°
33
0°
Mounting
15
15
Horizontal pattern
+45°-polarization
Wind survival rating
Shipping dimensions
12
0°
24
0°
0°
24
0°
°
30
90°
21
60
20
30
270°
180°
3
10
10
30
0°
30
0°
30
°
33
3
0°
33
0°
790–960
1710–2170 MHz
1.5:1
50 ohms
IM3: -150 dBc
7-16 DIN female
100 watts (at 50°C)
13.2 lb (6 kg)
22 lb (10 kg) clamps included
46.6 inches (1184 mm)
6.7 inches (170 mm)
at 93 mph (150kph)
Side
45 lbf (200 N)
130 mph (215 kph)
52 x 10.2 x 8.7 inches
(1350 x 260 x 220 mm)
Fixed mounts for 2 to 4.6 inch (50 to 115
mm) OD masts are included.
Vertical pattern
-45°-polarization
Specifications
Gain
-45° polarization
horizontal beamwidth
-45° polarization
vertical beamwidth
Front-to-back ratio
1710–1880 MHz
13 dBi
28° (half-power)
1920–2170 MHz
15.5 dBi
22° (half-power)
28° (half-power)
22° (half-power)
27 dB
27 dB
6.7 inches
(170 mm)
46.6 inches
(1184 mm)
Mounting Information
222
11443-FRO
936.A3017
Description
Fixed mounts for 2 to 4.6 inch (50 to 115 mm) OD masts
are included.
Omnidirectional
Antennas
Omnidirectional Antennas
Frequency
Range
Gain
Model
698-894 MHz
1710–2170
4.5 dBi
9 dBi
840 10510
0°
4.5 dBi
9 dBi
840 10511
790-960 MHz
2 dBi
824-894 MHz
11 dBi
870-960 MHz
Electrical
Downtilt
Polarization
Connector
Height
Page
X
7-16 DIN
24 inches
225
0°
X
7-16 DIN
24 inches
225
K751161
0°
V
N
13.7 inches
227
738 192
0°
V
7-16 DIN
127.4 inches
228
8 dBi
OGB6-915N
0°
V
N
60.6 inches
229
8 dBi
736 350
0°
V
7-16 DIN
60.6 inches
229
11 dBi
OGB9-915N
0°
V
N
119.5 inches
230
11 dBi
736 347
0°
V
7-16 DIN
119.5 inches
230
890-960 MHz
5 dBi
K7515641
0°
V
N
28.1 inches
231
902-928 MHz
10 dBi
840 10250
0°
H
N
83.9 inches
232
902-928 MHz
13.4 dBi
SL11-915N/DT2
2°
H
N
180.25 inches 233
928-953 MHz
13.4 dBi
SL11-940N/DT2
2°
H
N
156.25 inches 234
1710-2690 MHz
5 dBi
800 10126
0°
+45° and -45° N
27.3 inches
235
1710-2700 MHz
2 dBi
800 10431
0°
V
N
4.55 inches
236
2500-2700 MHz
11 dBi
800 10442
0°
V
7-16 DIN
44.6 inches
237
223
Omnidirectional
Antennas
Omnidirectional Antennas
224
840 10510, 840 10511
Dual Band
Dual Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
uasi-Omnidirectional Antenna
Antenna 1
Antenna 2
698–894
X
360°
0°
1710–2170
X
360°
0°
General specifications
698–894 MHz
1710–2170 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° upper and lower band
-45° upper and lower band
4 x 7-16 DIN female (long neck)
30 dB
40 dB (698–894 // 1710–2170 MHz)
With or without integrated combiner
Brown or grey
45 lb (20.4 kg)
24 inches (609 mm)
16 inches (407 mm)
at 93 mph (150kph)
32 lbf (138 N)
100 mph (160 kph)
32 x 20 x 19 inches
(813 x 508 x 483 mm)
52 lb (23.6 kg)
Shipping weight
698–894 MHz
n
60
20
30
0n
12
0n
12
0n
0n
24
30
0n
n
60
20
30
270n
90n
12
0n
0n
24
180n
3
Horizontal pattern
45°-polarization
1945 MHz
270n
90n
12
0n
0n
24
180n
0n
15
180n
Vertical pattern
45°-polarization
880 MHz
0n
10
n
60
20
0n
15
Horizontal pattern
45°-polarization
880 MHz
90n
0n
15
0n
15
21
0n
0n
24
Gain (typical)
Maximum input power
+45° and -45° polarization
vertical beamwidth
30
0n
30
270n
21
0n
90n
Specifications
n
60
30
270n
3
10
20
30
180n
30
n
30
n
10
21
0n
30
0n
3
0n
0n
33
10
1710–2170 MHz
0n
0n
33
3
0n
33
0n
33
0n
30
n
Connector
Isolation intrasystem
intersystem
Combiner
Radome color
Weight
Height
Radome diameter
Wind load
Side
Wind survival rating
Shipping dimensions
21
0n
VSWR
Impedance
Intermodulation (2x20w)
Polarization
30
n
Frequency range
Vertical pattern
45°-polarization
1945 MHz
698–806 MHz
806–894 MHz
1710–1880 MHz
1850–1990 MHz
1920–2170 MHz
4.5 dBi
6.5 dBi
9 dBi
9 dBi
8.5 dBi
250 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C)
37° (half-power)
30° (half-power)
19° (half-power)
17° (half-power)
17.5° (half-power)
Order Information
Model
840 10510
840 10511
Description
Brown Omni Antenna
Grey Omni Antenna
11202-E
225
840 10510, 840 10511
Dual Band
uasi-Omnidirectional Antenna
13.9 inches
(353 mm)
24 inches
(609 mm)
26.8 inches
(682 mm)
1-14 threaded rod
0.5 inches max.
(12.7 mm)
Flat washer
Split ring lock washer
16 inches
(407 mm)
1-14 hex nut (requires a 1 wrench)
torque setting: 90 lbf ft (122 N m)
Avoid obstructing the two vent fittings.
Arrows indicate the direction
of maximum signal strength.
Customer supplied mounting bracket
must fit within a 10 inch (254 mm) circle.
Mounting E uipment
Designed to be mounted on top of a utility
pole using a custom mounting bracket
supplied by the customer.
226
K751161
Omnidirectional Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
790–960
V
360°
0°
Specifications
A
B
MOUNTING
H-plane
Horizontal pattern
V-polarization
3
30
n
0n
10
30
0n
n
60
20
30
270n
90n
12
0n
21
0n
0n
24
180n
0n
15
Shipping weight
790–960 MHz
2 dBi
50 ohms
1.5:1
IM3: -150dBc
Vertical
100 watts (at 50°C)
Omni
78 degrees (half-power)
N female
1.6 lb (.74 kg)
13.7 inches (348 mm)
0.83 inches (21 mm)
at 93 mph (150kph)
4 lbf (17 N)
120 mph (200 kph)
17.9 x 4.4 x 3.8 inches
(455 x 112 x 97 mm)
3 lb (1.4 kg)
0n
33
Frequency range
Gain
Impedance
VSWR
Intermodulation (2x5w)
Polarization
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Height
Radome diameter
Wind load
Side
Wind survival rating
Shipping dimensions
E-plane
Vertical pattern
V-polarization
13.7 inches
(348 mm)
16.7 inches
(424 mm)
Mounting E uipment
Description
Mounting hardware supplied.
A. Mounting for 1.6 to 2.1 inch (40 to 54 mm) OD mast.
B. Mounting for 0.8 to 2.1 inch (20 to 54 mm) OD mast.
Order Information
Model
K751161
Description
Antenna with N connector
0° electrical downtilt
10062936.450/k
227
738 192
Omnidirectional Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
806–894
V
360°
0°
Specifications
o
3
30
0o
33
0o
10
30
0o
60
20
o
30
270o
90o
12
0o
0o
24
0o
180o
0o
15
21
127.4 inches
(3237 mm)
H-plane
Horizontal pattern
V-polarization
136.5 inches
(3467 mm)
Frequency range
Gain
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Height
Radome diameter
Wind survival rating
Wind load
Side
Shipping dimensions
806–894 MHz
11 dBi
50 ohms
1.5:1
IM3: -150dBc
Vertical
500 watts (at 50°C)
Omni
7 degrees (half-power)
7-16 DIN female
18.7 lb (8.5 kg)
127.4 inches (3237 mm)
2 inches (51 mm)
110 mph (180 kph)
at 93 mph (150kph)
52 lbf (230 N)
138.4 x 5.8 x 4.4 inches
(3516 x 148 x 112 mm)
26.6 lb (12 kg)
Shipping weight
3
30
o
0o
33
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
E-plane
Vertical pattern
V-polarization
MOUNTING
Mounting E uipment
Description
Mounting hardware supplied.
For masts of 2 to 3.75 inch (50 to 94 mm) OD.
Mounting E uipment
228
11242-A
936.1375/h
Description
Mounting hardware supplied.
For masts of 2 to 3.75 inch (50 to 94 mm) OD.
OGB6-915N, 736 350
Omnidirectional Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
870–960
V
360°
0°
Single Polarization
HPBW
Electrical Downtilt
Specifications
Frequency range
Gain
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Height
Radome diameter
Wind survival rating
Wind load
Side
Shipping dimensions
Shipping weight
870–960 MHz
8 dBi
50 ohms
1.5:1
IM3: -150dBc
Vertical
500 watts (at 50°C)
Omni
13 degrees (half-power)
N or 7-16 DIN female
12 lb (5.4 kg)
60.6 inches (1540 mm)
2 inches (51 mm)
120 mph (200 kph)
at 93 mph (150kph)
30 lbf (130 N)
70 x 6 x 5 inches
(1778 x 153 x 127 mm)
14 lb (6.4 kg)
60.6 inches
(1540 mm)
H-plane
Horizontal pattern
V-polarization
69.6 inches
(1768 mm)
E-plane
Vertical pattern
V-polarization
MOUNTING
Mounting E uipment
Description
Mounting hardware supplied.
For masts of 2 to 3.75 inch (50 to 94 mm) OD.
Order Information
Model
OGB6-915N
736 350
Description
Antenna with N connector
0° electrical downtilt
Antenna with 7-16 DIN connector
0° electrical downtilt
11031-B
936.1275/h
229
OGB9-915N, 736 347
Omnidirectional Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
870–960
V
360°
0°
Specifications
H-plane
Horizontal pattern
V-polarization
119.5 inches
(3035 mm)
128 inches
(3265 mm)
Frequency range
Gain
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Height
Radome diameter
Wind load
Side
Wind survival rating
Shipping dimensions
Shipping weight
870–960 MHz
11 dBi
50 ohms
1.5:1
IM3: -150dBc
Vertical
500 watts (at 50°C)
Omni
7 degrees (half-power)
N or 7-16 DIN female
17.5 lb (7.9 kg)
119.5 inches (3035 mm)
2 inches (51 mm)
at 93 mph (150kph)
48 lbf (210 N)
120 mph (200 kph)
137 x 5.5 x 5.5 inches
(3480 x 140 x 140 mm)
35 lb (15.9 kg)
E-plane
Vertical pattern
V-polarization
MOUNTING
Mounting E uipment
Description
Mounting hardware supplied.
For masts of 2 to 3.75 inch (50 to 94 mm) OD.
Order Information
Model
OGB9-915N
736 347
230
10518-E
936.1062/h
Description
Antenna with N connector
0° electrical downtilt
Antenna with 7-16 DIN connector
0° electrical downtilt
K7515641
Omnidirectional Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
890–960
V
360°
0°
Specifications
Frequency range
Gain
Impedance
VSWR
Intermodulation (2x5w)
Polarization
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Height
Radome diameter
Wind load
Side
Wind survival rating
Shipping dimensions
Shipping weight
A
890–960 MHz
5 dBi
50 ohms
1.5:1
IM3: -150dBc
Vertical
250 watts (at 50°C)
Omni
30 degrees (half power)
N female
2.0 lb (0.9 kg)
28.1 inches (715 mm)
0.83 inches (21 mm)
at 93 mph (150kph)
5 lbf (20 N)
120 mph (200 kph)
32.5 x 4.4 x 3.8 inches
(825 x 112 x 97 mm)
5.0 lb (2.3 kg)
H-plane
Horizontal pattern
V-polarization
28.1 inches
(715 mm)
30.9 inches
(786 mm)
E-plane
Vertical pattern
V-polarization
B
MOUNTING
Mounting E uipment
Description
Mounting hardware supplied.
A. Mounting for 1.6 to 2.1 inch (40 to 54 mm) OD mast.
B. Mounting for 0.8 to 2.1 inch (20 to 54 mm) OD mast.
Order Information
Model
K7515641
OGB3-900N
Description
Antenna with N connector
0° electrical downtilt
10046-K
936.376/j
231
840 10250
Omnidirectional PARASLOT Antenna
Antenna 1
Single Band (MHz)
902–928
H
360°
0°
Single Polarization
HPBW
Electrical Downtilt
2.6 in (65 mm)
The Kathrein-Scala 840 10250 Paraslot antenna is specifically
designed for spread spectrum systems and other applications
in the 902–928 MHz ISM band, featuring high gain and an offset
omnidirectional pattern.
T h e H - p o l a r i ze d 8 4 0 1 0 2 5 0 p r ov i d e s i s o l a t i o n f r o m
co-channel and adjacent-channel V-polarized signals. The
Kathrein-Scala Paraslot design used in these antennas has earned
a reputation for high performance and reliability in thousands of
low-power UHF-TV broadcast transmission systems during the
past 25 years.
Specifications
23.7 inches
(602 mm)
902–928 MHz
10 dBi (maximum)
50 ohms
1.5:1
Horizontal
100 watts (at 50°c)
12 degrees (half-power)
N
13.5 lb (6.1 kg)
83.9 inches (2131 mm)
2.6 inches (65 mm)
at 93 mph (150kph)
24 lbf (105 N)
120 mph (200 kph)
92 x 6 x 6 inches (2337 x 152 x 152 mm)
25 lb (11.3 kg)
3
0n
33
0n
33
0n
n
60
20
30
0n
30
12
0n
H-plane
Vertical pattern
H-polarization
270n
90n
12
0n
0n
24
180n
0n
15
21
0n
0n
24
0n
15
PARASLOT is a registered trademark of Kathrein Inc., Scala Division.
90n
21
0n
270n
180n
n
60
20
30
The top mounting bracket should be
located approximately 2 in. (51 mm)
below the radome collar. The bottom
mounting bracket should be located
approximately 4 in. (102 mm) above
the bottom of the antenna.
3
10
10
30
0n
0n
30
n
Radome collar
Frequency range
Gain
Impedance
VSWR
Polarization
Maximum input power
H-plane beamwidth
Connector
Weight
Height
Radome diameter
Wind load
Side
Wind survival rating
Shipping dimensions
Shipping weight
30
n
83.9 inches
(2131 mm)
E-plane
Horizontal pattern
H-polarization
Mounting E uipment
Model
Description
Mounting kits are available for attachment to a flat vertical
surface or to masts with 2.375 to 3.5 inch (60 to 89 mm) OD.
MKPS-13
Mounting Kit for mounting to a
(optional)
flat plate
MKPP-23
Mounting Kit for 2.375 to 3.5 inch
(optional)
(60 to 89 mm) OD mast.
See Mechanical Accessories Section for more information.
10964-D
232
SL11-915/DT2
Omnidirectional PARASLOT Antenna
Antenna 1
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
902–928
H
360°
2°
The Kathrein-Scala SL11-915/DT2 Paraslot antenna is
specifically designed for spread spectrum systems and
other applications in the 902–928 MHz ISM band, featuring
high gain and an offset omnidirectional pattern.
Specifications
Frequency range
Gain
Impedance
VSWR
Polarization
Maximum input power
H-plane beamwidth
Electrical downtilt
Connector
Weight
Height
Diameter
Wind load
Side
Wind survival rating
Shipping dimensions
Shipping weight
902–928 MHz
13.4 dBi (maximum)
50 ohms
1.35:1
Horizontal
300 watts (at 50°c)
5.8 degrees (half-power)
2 degrees (other values optional)
N female
26 lb (11.8 kg)
180.25 inches (4578 mm)
2.375 inches (60 mm)
at 93 mph (150kph)
64 lbf (283 N)
100 mph (161 kph)
190 x 6 x 6 inches
(4826 x 152 x 152 mm)
48.0 lb (21.8 kg)
2.375 in (60 mm)
180.25 inches
(4578 mm)
PARASLOT is a registered trademark of Kathrein Inc., Scala Division.
H-plane
Vertical pattern
H-polarization
2° electrical downtilt
E-plane
Horizontal pattern
H-polarization
Mounting E uipment
Model
Description
MKPS-13
Mounting Kit for mounting to a flat plate
(optional)
MKPP-23
Mounting Kit for 2.375 to 3.5 inch
(optional)
(60 to 89 mm) OD mast.
MKGK-1
Guy Kit
(optional)
MKSK-1
Spreader Kit
(optional)
See Mechanical Accessories Section for more mounting information.
athrein
ala Division re ommends that this antenna e
se ured rom the top in addition to the standard ottom
mounting Conta t athrein
ala Division ngineering
or assistan e
10059-
233
SL11-940/DT2
Omnidirectional PARASLOT Antenna
Antenna 1
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
2.375 in (60 mm)
928–953
H
360°
2°
The Kathrein-Scala SL11-940/DT2 Paraslot antenna is specifically
designed as a central-station antenna for MAS systems operating
in the 928–953 MHz band, featuring high gain and an offset
omnidirectional pattern.
Specifications
156.25 inches
(3969 mm)
Frequency range
Gain
Impedance
VSWR
Polarization
Maximum input power
H-plane beamwidth
Electrical downtilt
Connector
Weight
Height
Diameter
Wind load
Side
Wind survival rating
Shipping dimensions
Shipping weight
928–953 MHz
13.4 dBi (maximum)
50 ohms
1.35:1
Horizontal
300 watts (at 50°c)
5.8 degrees (half-power)
2 degrees (other values optional)
N female
25.0 lb (11.3 kg)
156.25 inches (3969 mm)
2.375 inches (60 mm)
at 93 mph (150kph)
54 lbf (240 N)
100 mph (161 kph)
167 x 7 x 6 inches
(4242 x 178 x 152 mm)
35 lb (15.9 kg)
PARASLOT is a registered trademark of Kathrein Inc., Scala Division.
H-plane
Vertical pattern
H-polarization
2° electrical downtilt
E-plane
Horizontal pattern
H-polarization
Mounting E uipment
10072-
234
Model
Description
MKPS-13
Mounting Kit for mounting to a flat plate
(optional)
MKPP-23
Mounting Kit for 2.375 to 3.5 inch
(optional)
(60 to 89 mm) OD mast.
MKGK-1
Guy Kit
(optional)
MKSK-1
Spreader Kit
(optional)
See Mechanical Accessories Section for more mounting information.
athrein
ala Division re ommends that this antenna e se ured
rom the top in addition to the standard ottom mounting
Conta t athrein
ala Division ngineering
or assistan e
NEW
800 10126
Omnidirectional Antenna
Antenna 1
Single Band (MHz)
1710–2690
X
360°
0°
Dual Polarization
HPBW
Electrical Downtilt
General specifications
Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Connector
Maximum input power
Weight
Height
Radome diameter
Wind load
Side
Wind survival rating
Shipping dimensions
3.9 inches
(100 mm)
1710–2690 MHz
1.5:1
50 ohms
IM3: -150 dBc
+45° and -45°
2 x N female
100 watts (at 50°C) per input
5.1 lb (2.3 kg)
27.3 inches (694 mm)
3.9 inches (100 mm)
at 93 mph (150kph)
12 lbf (50 N)
120 mph (200 kph)
31.5 x 7.9 x 7.9 inches
(800 x 200 x 200 mm)
27.3 inches
(694 mm)
0 – 2690 MHz +45° –45° o arizati
5.9 inches
(150 mm)
42°
10
10
0
Horizonta
0
ertica attern
0° e ectrica o nti t
attern
Specifications
Gain
+45° and -45° polarization
horizontal beamwidth
Deviation from circularity
+45° and -45° polarization
vertical beamwidth
1710–1990 MHz
5 dBi
360° (half-power)
1920–2170 MHz
5 dBi
360° (half-power)
2170–2490 MHz
5 dBi
360° (half-power)
2490–2690 MHz
5 dBi
360° (half-power)
1 dB
42° (half-power)
1 dB
40° (half-power)
1.5 dB
36° (half-power)
1.5 dB
33° (half-power)
Mounting Information
Description
Flange connection 8 x M6 at a graduated diameter of 136 mm.
11441-A
936.24532
235
800 10431
Omnidirectional Antenna
Antenna 1
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
1710–2700
V
360°
0°
Specifications
Frequency range
Gain
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Height
Radome diameter
H-plane
Horizontal pattern
V-polarization
o
o
o
1710–2700 MHz
2 dBi
50 ohms
1.8:1
IM3: -150 dBc
Vertical
50 watts (at 50°C)
Omni
78°
N female
0.33 lb (150 g)
4.55 inches (115 mm)
0.78 inches (20 mm)
o
o
o
o
o
o
o
o
o
E-plane
Vertical pattern
V-polarization
Mounting E uipment
Description
Mounts through a 0.63 inch (16 mm) hole to surfaces of
0.39 inch (10 mm) thick.
Antenna may be inverted.
236
10975-A
936.2913
800 10442
Omnidirectional Antenna
Mounting Clamps Included
Antenna 1
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
2500–2700
V
360°
0°
Specifications
Frequency range
Gain
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Height approx.
Radome diameter
Wind load
Side
Wind survival rating
Shipping dimensions approx.
2500–2700 MHz
11 dBi
50 ohms
1.5:1
IM3: -150 dBc
Vertical
200 watts (at 50°C)
Omni
7 degrees (half-power)
7-16 DIN female
9.9 lb (4.5 kg)
44.6 inches (1132 mm)
2 inches (51 mm)
at 93 mph (150kph)
25 lbf (110 N)
120 mph (200 kph)
48.5 x 5.8 x 4.4 inches
(1232 x 148 x 112 mm)
44.6 inches
(1132 mm)
49.7 inches
(1262 mm)
3
30
o
0o
33
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
180o
0o
15
21
0o
0o
24
H-plane
Horizontal pattern
V-polarization
3
30
o
0o
33
0o
10
30
0o
o
60
20
30
270o
90o
12
0o
180o
0o
15
21
0o
0o
24
MOUNTING
E-plane
Vertical pattern
V-polarization
Mounting E uipment
Description
Mounting hardware supplied.
For masts of 2 to 3.75 inch (50 to 94 mm) OD.
Order information
Model
800 10442
Description
2500–2700 MHz Omni antenna
10979-D
936.3117/c
237
Notes
238
Indoor and Special Application Antennas
Indoor
Frequency
Range
Model
Horizontal
Beamwidth
Polarization
790–960 MHz
1425–3800 MHz
5150–6000 MHz
800 10249
Omni
V
241
790–960 MHz
1710–2700 MHz
2500–2700 MHz
800 10709
Omni
V
242
790–960 MHz
1710–2700 MHz
1710–2700 MHz
800 10710
790–960 MHz
1710–2700 MHz
800 10465
90°
V
244
790–960 MHz
1710–2700 MHz
800 10677
90°
V
+45° and -45°
245
1710–2700 MHz
741 573
Omni
V
246
1710–6000 MHz
800 10430
Omni
V
247
790–960 MHz
1710–2700 MHz
800 10847
Omni
V
248
Indoor and Special
Antennas
H
Omni
V
243
H
E-911
Model
Page
Connector
Horizontal
Beamwidth Polarization
Page
GPS-C
N
Omni
RHCP
249
OG-860/1920/GPS-A
N
Omni
V, RHCP
250
239
Indoor and Special
Antennas
Indoor and Special Application Antennas
240
800 10249
Multi Band Indoor Omnidirectional Antenna
Multi Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 1
Antenna 1
790–960
V
360°
0°
1425–3800
V
360°
0°
5150–6000
V
360°
0°
Specifications
Frequency range
Gain
Impedance
VSWR
790–806 MHz
806–960 MHz
1425–1710 MHz
1710–2200 MHz
5150–5300 MHz
5300–6000 MHz
Polarization
Maximum input power
H-plane beamwidth
Connector
Protection class
Weight
Dimensions
Shipping dimensions
790–960 MHz
1425–3800 MHz
5150–6000 MHz
|2 dBi
50 ohms
1.7:1
1.5:1
2.0:1
1.4:1
2.4:1
2.0:1
Vertical
50 watts (at 50°C)
Omni
N female
IP 30
1 lb (0.47 kg)
10.2 x 10.2 x 3.7 inches
(258 x 258 x 94 mm)
10.9 x 10.9 x 6.7 inches
(277 x 277 x 169 mm)
3.7 inches
(94 mm)
10.2 inches
(258 mm)
#LIPTHEPROTECTIVEHOUSINGINTOPOSITIONAFTER
THEANTENNAHASBEENMOUNTEDWITHTHEHELP
OFTHETHREESUPPLIEDSCREWS
Mounting Options
Description
Mounts to ceiling using three screws (two types supplied).
A 1.4 in. (35 mm) hole is required for the N connector.
10848-D
936.2506/d
241
800 10709
Multi Band Indoor Omnidirectional Antenna
Multi Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 1
Antenna 2
790–960
V
360°
0°
1710–2700
V
360°
0°
2500–2700
H
360°
0°
Specifications
Frequency range
VSWR
790–960 MHz
1710–2700 MHz
Polarization
Specifications
790–960 MHz / 1710–2700 MHz
790–960 MHz
1710–2700 MHz
2:1
2:1
Vertical
2500–2700 MHz
2500–2700 MHz
2:1
Horizontal
Frequency range
VSWR
Polarization
General specifications
790–960
1710–2700
VPol
2500–2700
HPol
N
N
Gain
Impedance
Maximum input power
H-plane beamwidth
Connector
Protection class
Weight
Dimensions
Shipping dimensions
Mounting
3.7 inches
(94 mm)
|2 dBi
50 ohms
50 watts (at 50°C)
Omni
2 x N female
IP 30
1.1 lb (0.5 kg)
10.2 x 10.2 x 3.7 inches
(258 x 258 x 94 mm)
10.9 x 10.9 x 6.7 inches
(277 x 277 x 169 mm)
Mounts to ceiling using three screws
(two types supplied).
min. ‡ 2.6 inches
(min. ‡ 65 mm)
10.2 inches
(258 mm)
Clip the protective housing into position after
the antenna has been mounted with the help
of the three supplied screws.
Mounting Options
Description
Mounts to ceiling using three screws (two types supplied).
A 1.4 in. (35 mm) hole is required for the N connector.
242
11315-A
936.3783
NEW
800 10710
Triple Band Indoor Omnidirectional Antenna
Triple Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
Specifications
Frequency range
VSWR
790–960 MHz
1710–2700 MHz
Polarization
Specifications
Antenna 1
Antenna 1
Antenna 2
790–960
V
360°
0°
1710–2700
V
360°
0°
1710–2700
H
360°
0°
790–960 MHz / 1710–2700 MHz
790–960 MHz
1710–2700 MHz
2:1
2:1
Vertical
1710–2700 MHz
1710–2700 MHz
2:1
Horizontal
Frequency range
VSWR
Polarization
General specifications
Gain
Impedance
Intermodulation (2x20w)
Maximum input power
H-plane beamwidth
Connector
Isolation
Protection class
Weight
Dimensions
Shipping dimensions
790– 960
1710 –2700
o
|2 dBi
50 ohms
IM3: -140 dBc
50 watts (at 50°C)
Omni
2 x N female
30 dB
IP 30
2.2 lb (1 kg)
15 x 15 x 4.6 inches
(380 x 380 x 118 mm)
15.7 x 15.7 x 7.9 inches
(400 x 400 x 200 mm)
connector fe a e
12.3 inches
(312 mm)
1710 –2700
H o
i t e rotecti e ou in into o ition after
t e antenna a een ounte
it t e e
of t e t ree u ie cre
Mounting Options
Description
Mounts to ceiling using three screws (two types supplied).
A 1.4 in. (35 mm) hole is required for the N connector.
11442-A
936.4522
243
800 10465
Dual Band Indoor Directional Antenna
Integrated Combiner
Dual Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
0o
3
Antenna 2
790–960
V
90°
0°
1710–2700
V
90°
0°
Specifications
30
o
33
0o
Antenna 1
10
30
0o
o
60
20
30
270o
90o
12
0o
0o
24
0o
21
0o
15
180o
H-plane
Horizontal pattern – V-polarization
90o
Shipping dimensions
o
30
0o
33
o
Protection class
Weight
Dimensions
0o
3
10
30
0o
60
20
Frequency range
Gain
Impedance
VSWR
790–806 MHz
806–960 MHz
1710–2700 MHz
Polarization
Maximum input power
H-plane beamwidth
Connector
30
270o
12
0o
0o
24
0o
180o
0o
15
21
Shipping weight
790–960 MHz and 1710–2700 MHz
7 dBi approx.
50 ohms
2.2:1
2.0:1
2.0:1
Vertical
50 watts (at 50° C)
90 degrees approx. (half-power)
N female connector with 39 inch (1 m)
RG-223/CU coax pigtail
IP 30
1.1 lb (0.5 kg)
9 x 5.5 x 1.7 inches
(231 x 140 x 50 mm)
14.3 x 6 x 2.4 inches
(363 x 152 x 62 mm)
2 lb (0.9 kg)
E-plane
Vertical pattern – V-polarization
790–960
VPol
1710–2700
VPol
C
N
Mounting:
Mount the attachment plate to the wall
using two screws of 4 mm diameter
(not supplied) in the position as indicated.
Align the antenna over the
attachment plate.
Mounting Options
Description
Mounting clip supplied
244
11006-C
936.3036/d
Pull the antenna to the stop.
800 10677
Integrated Combiner
Dual Band Indoor Directional Antenna
Dual Band (MHz)
Single/Dual Polarization
HPBW
Electrical Downtilt
Antenna 1
Antenna 2
Antenna 3
790–960
V
90°
0°
1710–2700
X -45°
90°
0°
1710–2700
X 45°
90°
0°
Specifications
Frequency range
Gain
Impedance
VSWR
Polarization
790–960 MHz
1710–2700 MHz
Maximum input power
H-plane beamwidth
Connector
Isolation
Protection class
Weight
Dimensions
Shipping dimensions
Shipping weight
790–960 MHz and 1710–2700 MHz
7 dBi approx.
50 ohms
2.0:1
Vertical
+45° and -45°
50 watts (at 50° C)
90 degrees approx. (half-power)
2 x N female connectors with 39 inch (1 m)
RG-223/CU coax pigtails
25 dB
IP 30
1.3 lb (0.6 kg)
9.1 x 5.5 x 1.7 inches
(232 x 140 x 50 mm)
14.3 x 6 x 2.4 inches
(363 x 152 x 62 mm)
2 lb (0.9 kg)
1710–2700
XPol –45o
790–960
VPol
H-plane
Horizontal pattern – V-polarization
1710–2700
XPol +45o
C
N
N
Mounting:
Mount the attachment plate to the wall
using two screws of 4 mm diameter
in the position as indicated.
Align the antenna over the
attachment plate.
Pull the antenna to the stop.
Mounting Options
Description
Mounting clip supplied
11229-B
936.3616/c
245
741 573
Single Band Indoor Omnidirectional Antenna
Antenna 1
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
1710–2700
V
360°
0°
Specifications
Frequency range
Gain
Impedance
VSWR 1710–1880 MHz
1850–1990 MHz
1920–2170 MHz
2170–2500 MHz
2500–2700 MHz
Polarization
Maximum input power
H-plane beamwidth
Connector
Weight
Dimensions
3.9 inches
(100 mm)
1710–2700 MHz
2 dBi
50 ohms
1.6:1
1.6:1
1.6:1
2:1
2.2:1
Vertical
50 watts (at 50°C)
Omni
N female
0.33 lb (0.15 kg)
3.9 x 3.9 x 2 inches
(100 x 100 x 50 mm)
Clip the protective housing into position after the antenna
has been mounted using the supplied screws
Mounting Options
Description
246
10717-D
936.2010/e
Mounts to ceiling using screws. A 1.4 in. (35 mm) hole is required
for the N connector.
800 10430
Wide Band Indoor Omnidirectional Antenna
Antenna 1
Wide Band (MHz)
1710–6000
Single/Dual Polarization
V
HPBW
360°
Electrical Downtilt
0°
Specifications
Frequency range
Gain
Impedance
VSWR
Polarization
Maximum input power
H-plane beamwidth
Connector
Protection class
Weight
Dimensions
1710–6000 MHz
2 dBi
50 ohms
1.5:1
Vertical
50 watts (at 50°C)
Omni
N female
IP 30
0.3 lb (0.133 kg)
5.4 x 5.4 x 2.2 inches
(138 x 138 x 56 mm)
2.2 inches
(56 mm)
N connector, female
Clip the protective housing into position after
the antenna has been mounted with the help
of two supplied screws.
5.4 inches
(138 mm)
Mounting Options
Description
Mounts to ceiling using screws. A 1.4 in. (35 mm) hole is required
for the N connector.
11092-A
936.3144
247
NEW
800 10847
Dual Band Omnidirectional Antenna
Indoor or Outdoor Use
Dual Band (MHz)
Dual Polarization
HPBW
Electrical Downtilt
790–960 MHz
Antenna 2
790–960
V
360°
0°
1710–2700
V
360°
0°
Specifications
Frequency range
30
°
0°
33
0°
3
Antenna 1
790–960 MHz
1710–2700 MHz
2 dBi
50 ohms
2.0:1
IM3: -150dBc
Vertical
50 watts (at 50°C)
Omni
78 degrees (half-power)
N female
0.44 lb (0.2 kg)
8.5 inches (216 mm)
at 93 mph (150kph)
2 lbf (6 N)
1.2 inches (30 mm)
Mounts in a 0.63 inch (16 mm) diameter hole in surfaces of 0.39 inch (10
mm) maximum thickness.
May be inverted.
10
30
0°
°
60
20
30
270°
90°
12
0°
0°
24
0°
21
0°
15
180°
H-plane
Horizontal pattern
V-polarization
3
30
°
0°
33
0°
10
30
0°
°
60
20
30
270°
Gain
Impedance
VSWR
Intermodulation (2x20w)
Polarization
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Height
Wind load
90°
Radome diameter
Mounting
12
0°
0°
24
0°
21
0°
15
180°
E-plane
Vertical pattern
V-polarization
1710–2700 MHz
30
°
3
0°
33
0°
10
30
0°
°
60
20
30
270°
90°
12
0°
0°
24
0°
21
0°
15
180°
H-plane
Horizontal pattern
V-polarization
3
30
°
0°
33
0°
10
30
0°
°
60
20
30
270°
90°
Mounting Information
12
0°
0°
24
0°
21
0°
15
180°
E-plane
Vertical pattern
V-polarization
248
11438-A
936.4398
Description
Mounts in a 0.63 inch (16 mm) diameter hole in surfaces of 0.39
inch (10 mm) maximum thickness.
Order Information
Model
800 10847
Description
Dual Band Omnidirectional Antenna
GPS-C
E-911 Antenna
Antenna 1
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
Receives both GPS precision timing signals .
Assists in compliance with FCC GPS location requirements.
All the metal parts are DC grounded.
1575.42 10
RHCP
360°
0°
GPS specifications
Frequency range
Gain
Pre-amp filtering (typical)
Polarization
H-plane beamwidth
E-plane beamwidth
LNA gain
Noise figure
(including pre-filtering)
VSWR
Antenna
LNA
Connector
DC power
Temperature range
1575.42 10 MHz
4 dBic
-30 dB at 100 MHz
Righthand circular
Omni
105 degrees (half-power)
26 dB
1.6 dB
1.5:1
2:1
N female
+5 Vdc, 20 mA through N output connector
-35° C to +70° C
Horizontal pattern
Vertical pattern
Mechanical specifications
Weight
Height
Radome diameter
Wind load
Side
Wind survial rating
1.25 lb (0.57 kg)
5.5 inches (140 mm)
2 inches (51 mm)
at 93 mph (150kph)
2 lbf (6 N)
120 mph (200 kph)
5.5 inches
(140 mm)
2 inches
(51 mm)
3.2 inches
(80 mm)
Mounting Information
Description
Mounting hardware supplied.
For masts of 2.125 to 3 inch (55 to 75 mm) OD.
2.6 inches
(65 mm)
10833-C
249
OG-860/1920/GPS-A
Dual Band E-911 Antenna
Single Band (MHz)
Single Polarization
HPBW
Electrical Downtilt
Antenna 1
Band 1
Antenna 1
Band 2
Antenna 2
824–894
V
360°
0°
1850–1990
V
360°
0°
1575.42 10
RHCP
360°
0°
824–894 MHz
Receives both GPS precision timing signals and
wireless phone bands.
TDOA (time-difference of arrival) systems ready.
Assists in compliance with FCC GPS location
requirements.
All metal parts are DC grounded.
Wireless specifications (Receive only)
Horizontal pattern
Vertical pattern
1850–1990 MHz
Horizontal pattern
Frequency range
Gain
824–894 MHz
1850–1990 MHz
VSWR 824–894 MHz
1850–1990 MHz
Impedance
Polarization
H-plane beamwidth
E-plane beamwidth
824–894 MHz
1850–1990 MHz
Connector
824–894 MHz
1850–1990 MHz
1.5 dBi
2 dBi
2.0:1
2.0:1
50 ohms
Vertical
Omni
75 degrees (half-power)
65 degrees (half-power)
N female
Vertical pattern
GPS specifications
1575 MHz
13 inches
(330 mm)
Horizontal pattern
Vertical pattern
Frequency range
Gain
Pre-amp filtering (typical)
Polarization
H-plane beamwidth
E-plane beamwidth
LNA gain
Noise figure
(including pre-filtering)
VSWR
Antenna
LNA
Connector
DC power
Temperature range
1575.42 10 MHz
4 dBic
-30 dB at 100 MHz
Righthand circular
Omni
105 degrees (half-power)
26 dB
1.6 dB
1.5:1
2:1
N female
+5 Vdc, 20 mA through N
output connector
-35° C to +70° C
Mechanical specifications
2 inches
(51 mm)
Weight
Height
Radome diameter
Wind load
Side
Wind survial rating
1.65 lb (0.75 kg)
13 inches (330 mm)
2 inches (51 mm)
at 93 mph (150kph)
4 lbf (15 N)
120 mph (200 kph)
3.2 inches
(80 mm)
2.6 inches
(65 mm)
10816-C
250
Mounting Information
Description
Hardware is included for mounting to a 2.125 to 3 inch
(55 to 75 mm) OD mast.
TMA’s, Combiners, & Electrical Accessories
Tower Mount Amplifiers
Model
Description
782 10874
Dual tower mount amplifier AMPS/AMPS/12 dB
Page
782 10876
Dual tower mount amplifier PCS/PCS/12 dB
255
782 10877
Dual tower mount amplifier AWS/AWS/12dB
257
253
Power Dividers & Power Taps
Frequency Range
Model
694–2700 MHz
860 10017
2-way power divider for indoor use only
263
860 10018
3-way power divider for indoor use only
263
860 10019
4-way power divider for indoor use only
263
259
694–3800 MHz
694–3800 MHz
Page
860 10100
2-way RF power divider for outdoor & indoor use
860 10102
3-way RF power divider for outdoor & indoor use
259
860 10104
4-way RF power divider for outdoor & indoor use
259
2-way RF power divider for outdoor & indoor use
259
3-way RF power divider for outdoor & indoor use
259
860 10105
4-way RF power divider for outdoor & indoor use
259
260
790–960 MHz / 1710–2500 MHz
860 10023, K63236001
Adjustable indoor power tap
694–2700 MHz
860 10136, 860 10137, 860 10138
Indoor power tap
262
860 10150, 860 10151, 860 10152
Low-loss indoor power tap
261
TMA’s, Filters,
Electrical Accessories
860 10101
860 10103
Combiners
Frequency Range
Maximum Input Power
Model
698–894 / 1710–2400 MHz
< 500 W
782 11320, 782 11321, 782 11322, 782 11323
Dualband Combiner
Page
264
380–960 / 1710–2700 MHz
< 700 W
782 10680, 782 10681, 782 10682, 782 10683
Dualband Combiner
270
470–960 / 1710–2700 MHz
< 650 W / < 350 W
782 10660, 782 10661, 782 10662, 782 10663
782 10664, 782 10665 - Dualband Combiner
268
1850–1910 / 1930–1990 MHz
1710–1755 / 2110–2155 MHz
< 250 W
782 10809, 782 10810
Dualband Combiner
272
1850–1910 / 1930–1990 MHz
1710–1755 / 2110–2155 MHz
< 275 W
782 10469, 782 10808
Dualband Combiner
274
698–2690 MHz
< 150 W
782 10524 - 3 dB Coupler / Hybrid Combiner 2 : 2
276
698–2690 MHz
< 60 W
782 10504 - Hybrid Combiner
280
806–960 MHz
< 300 W
792 699 - Hybrid Combiner
282
806–960 MHz or 1710–2170
< 60 W
782 10500, 782 10502 - Hybrid Combiner
278
Frequency Range (MHz)
Maximum Input Power
Model
1850-1930 / 1930-1990 MHz
< 150 W (low or high band)
792 544
Duplexers
Page
287
Couplers, 50 Ohm Loads, GPS Amplifier, Radiation Monitor, Protection Cap
See the following page for summary list.
251
TMA’s, Combiners, & Electrical Accessories
Couplers
Frequency Range
Maximum Input Power
Model
Page
800–2200 MHz
< 100 W
793 555 - 3 dB Coupler with Cable Absorber
284
800–2200 MHz
< 300 W
793 554 - 3 dB Coupler (90° Hybrid)
288
1700-2200 MHz
< 300 W
793 006 - 3 dB Coupler
289
1700-2200 MHz
< 150 W
792 702 - 3 dB Coupler with Cable Absorber
285
TMA’s, Filters,
Electrical Accessories
50 Ohm Loads, GPS Amplifier, Radiation Monitor, Protection Cap
Frequency Range
Model
0 to 4000 MHz
50 Ohm RF Loads (various power ratings and frequency ranges)
290
1575.42 MHz, L1-signal
860 10142 - Low Noise GPS Amplifier
286
SI-1000+ - RF Radiation Monitor
291
782 11293 7-16 DIN Protection Cap
292
10–10000 MHz
252
Page
NEW
AMPS/AMPS/12 dB
•
•
•
•
•
•
•
782 10874
Fullband Double Dual Duplex Tower Mount Amplifier
Double unit for easy use with XPol antennas
Supports CWA, AISG 1.1 and AISG 2.0 (default)
AISG setting switchable
CWA and AISG configurations
Suitable for antenna RET control according to AISG/3GPP standard
Bypass mode to ensure cell operation in case of DC power down
Built-in lightning protection
Tx Characteristics
Frequency range
Insertion loss
Input power (per input)
Intermodulation products in Rx band
Return loss
Rx Characteristics
Ant 1
AMPS
869–894 MHz
0.35 dB (typical)
100 W (+50 dBm)
-116 dBm (2 Tx carriers at +43 dBm)
18 dB
Frequency range
AMPS
824–849 MHz
Loss in bypass mode
1.5 dB (typical) DC OFF
Return loss
Ant 0
Node B0
RET
18 dB (DC ON)
12 dB (DC OFF)
Gain
Noise figure
Output 1-dB compression point
3rd order intercept point (OIP3)
Node B1
12 dB (nominal)
1.3 dB (typical)
10 dBm
25 dBm
Environmental Characteristics
Operating temperature range
IP rating
MTBF
EMC
DC and Alarm Characteristics
DC supply
Operating current per TMA
Alarm management
-40 – +65°C
IP 67
1,200,000 hours (per TMA)
FCC Part 15
CWA-Mode
9–19 V
80–130 mA
170–180 mA
AISG-Mode
9–30 V
50 mA 12 V (nominal)
AISG
Mechanical Characteristics
Material
Connectors
RF
AISG connector
Mounting
Weight approx.
Dimensions (without connectors
or mounting brackets)
Shipping dimensions
Aluminum housing
7/16 DIN female, long neck
8 pin female, IEC 60130-9
(Pin 6: 9 – 30 V DC, pin 3: RS485B,
pin 5: RS485A, pin 7: DC return
other pins: Not connected)
Wall mounting with 4 screws (8mm max.)
Mast mounting with optional clamp set.
10.8 lb (4.9 kg)
10.8 x 6.6 x 2.9 inches
(275 x 168 x 73 mm)
15.7 x 9.8 x 5.9 inches
(400 x 250 x 150 mm)
o e 0
KATHREIN
o e 1
782 10874
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
RET
AISG
CWA
Remote Electrical Tilt
Antenna Interface Standards Group
Current Window Alarm
11395-FRO/a
936.A2876a
253
782 10874
Fullband Double Dual Duplex Tower Mount Amplifier
t
ti
ll
t
T
i
i
i
i
AMPS/AMPS/12 dB
l
Mounting Options
Model
2 x 131 1847
Description
Mounting Kit for 2 to 5.7 inch
(50 to 145 mm) OD mast.
Mast mounting with optional clamp set above.
Wall mounting with 4 screws (8mm max.)
See Mechanical Accessories section for more information.
254
NEW
PCS/PCS/12 dB
•
•
•
•
•
•
•
782 10876
Fullband Double Dual Duplex Tower Mount Amplifier
Double unit for easy use with XPol antennas
Supports CWA, AISG 1.1 and AISG 2.0 (default)
AISG setting switchable
CWA and AISG configurations
Suitable for antenna RET control according to AISG/3GPP standard
Bypass mode to ensure cell operation in case of DC power down
Built-in lightning protection
Ant 0
Ant 1
Tx Characteristics
Frequency range
Insertion loss
Input power (per input)
Intermodulation products in Rx band
Return loss
Rx Characteristics
PCS
1930–1990 MHz
0.3 dB (typical)
100 W (+50 dBm)
-116 dBm (2 Tx carriers at +43 dBm)
18 dB
Frequency range
PCS
1850–1910 MHz
Loss in bypass mode
2.0 dB (typical) DC OFF
Return loss
Node B0
18 dB (DC ON)
15 dB (DC OFF)
Gain
Noise figure
Output 1-dB compression point
3rd order intercept point (OIP3)
Node B1
12 dB (nominal)
1.4 dB (typical)
10 dBm
25 dBm (typical)
RET
Environmental Characteristics
Operating temperature range
IP rating
MTBF
EMC
DC and Alarm Characteristics
DC supply
Operating current per TMA
Alarm management
-40 – +65°C
IP 67
1,200,000 hours (per TMA)
FCC Part 15
CWA-Mode
9–19 V
80–130 mA
170–180 mA
AISG-Mode
9–30 V
50 mA 12 V (nominal)
AISG
Mechanical Characteristics
Material
Connectors
RF
AISG connector
Mounting
Weight approx.
Dimensions (without connectors
or mounting brackets)
Shipping dimensions
Aluminum housing
7/16 DIN female, long neck
8 pin female, IEC 60130-9
(Pin 6: 9 – 30 V DC, pin 3: RS485B,
pin 5: RS485A, pin 7: DC return
other pins: Not connected)
Wall mounting with 4 screws (8mm max.)
Mast mounting with optional clamp set.
10.1 lb (4.6 kg)
10.8 x 6.6 x 2.4 inches
(275 x 168 x 61 mm)
15.6 x 11.4 x 7.1 inches
(395 x 290 x 180 mm)
o e 0
KATHREIN
o e 1
782 10876
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
RET
AISG
CWA
The DTMA is not designed for permanent operation under water.
Test conditions for the IP67 rating: submerge depth: 1 m submerge time: 24 hours
Remote Electrical Tilt
Antenna Interface Standards Group
Current Window Alarm
11396-FRO/a
936.A2878b
255
782 10876
Fullband Double Dual Duplex Tower Mount Amplifier
t
ti
ll
t
T
i
i
i
PCS/PCS/12 dB
i
l
Mounting Options
Model
2 x 131 1847
Description
Mounting Kit for 2 to 5.7 inch
(50 to 145 mm) OD mast.
Mast mounting with optional clamp set above.
Wall mounting with 4 screws (8mm max.)
See Mechanical Accessories section for more information.
256
NEW
AWS/AWS/12 dB
•
•
•
•
•
•
•
782 10877
Fullband Double Dual Duplex Tower Mount Amplifier
Double unit for easy use with XPol antennas
Supports CWA, AISG 1.1 and AISG 2.0 (default)
AISG setting switchable
CWA and AISG configurations
Suitable for antenna RET control according to AISG/3GPP standard
Compact size
Built-in lightning protection
Tx Characteristics
Frequency range
Insertion loss
Input power (per input)
Intermodulation products in Rx band
Return loss
Rx Characteristics
Ant 1
AWS
2110–2170 MHz
0.3 dB (typical)
100 W (+50 dBm)
-125 dBm (2 Tx carriers at +43 dBm)
18 dB
Frequency range
AWS
1710–1770 MHz
Loss in bypass mode
2.0 dB (typical) DC OFF
Return loss
Ant 0
Node B0
RET
18 dB (DC ON)
12 dB (DC OFF)
Gain
Noise figure
Output 1-dB compression point
3rd order intercept point (OIP3)
Node B1
12 dB (nominal)
1.3 dB (typical)
10 dBm
25 dBm (typical)
Environmental Characteristics
Operating temperature range
IP rating
MTBF
EMC
-40 – +65°C
IP 67
1,200,000 hours (per TMA)
FCC Part 15
DC and Alarm Characteristics CWA-Mode AISG-Mode
DC supply
Operating current per TMA
Alarm management
9–19 V
80–130 mA
170–180 mA
9–30 V
50 mA 12 V (nominal)
AISG
Mechanical Characteristics
Material
Connectors
RF
AISG connector
Mounting
Weight approx.
Dimensions (without connectors
or mounting brackets)
Shipping dimensions
Aluminum housing
7/16 DIN female, long neck
8 pin female, IEC 60130-9
(Pin 6: 9 – 30 V DC, pin 3: RS485B,
pin 5: RS485A, pin 7: DC return
other pins: Not connected)
Wall mounting with 4 screws (8mm max.)
Mast mounting with optional clamp set.
5.5 lb (2.5 kg)
6.9 x 6 x 2 inches
(174 x 152 x 50 mm)
12.8 x 9.4 x 5.1 inches
(325 x 240 x 130 mm)
o e 0
KATHREIN
o e 1
782 10877
Tested To Comply
With FCC Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
The DTMA is not designed for permanent operation under water.
Test conditions for the IP67 rating: submerge depth: 1 m submerge time: 24 hours
11394-FRO/a
936.A2879a
257
782 10877
Fullband Double Dual Duplex Tower Mount Amplifier
t
ti
ll
t
T
i
i
i
i
AWS/AWS/12 dB
l
Mounting Options
Model
2 x 131 1847
Description
Mounting Kit for 2 to 5.7 inch
(50 to 145 mm) OD mast.
Mast mounting with optional clamp set above.
Wall mounting with 4 screws (8mm max.)
See Mechanical Accessories section for more information.
258
860 1010n Series
Outdoor and Indoor Applications
694–3800 MHz RF Power Dividers
Kathrein Scala Division RF power dividers are designed for use in a number of
professional applications including multi-element antenna arrays and radiating cable
systems and other cases where efficient broadband power splitting is required.
These dividers feature low insertion loss and excellent impedance match. Careful
and conservative mechanical designs assure a long service life with high reliability
and stability in even the most difficult environmental conditions.
2.6 inches
(65 mm)
860 10105
2.4 inches
(61 mm)
11.3 inches
(286 mm)
860 10104
2.1 inches
(54 mm)
2.5 inches
(63 mm)
11.4 inches
(289 mm)
860 10105
Specifications
Frequency range
Impedance
Insertion loss
Split
860 10100
860 10102
860 10104
VSWR
Maximum input power
Connector
Intermodulation (2x20w)
Temperature range
Weight (max.)
Dimensions (maximum)
Shipping dimensions
Shipping weight
694–3800 MHz
50 ohms
0.05 dB
2-way
3-way
4-way
1.3:1 (694–894 MHz)
1.15:1 (790–3800 MHz)
200 watts (at 50°C)
N female
IM3: -150 dBc
-55°C to +60°C
1.7 lb (0.78 kg)
11.4 x 2.5 x 2.1 inches
(289 x 63 x 54 mm)
11.8 x 3 x 3 inches
(300 x 75 x 75 mm)
2.7 lb (1.2 kg)
694–3800 MHz
50 ohms
0.05 dB
860 10101 2-way
860 10103 3-way
860 10105 4-way
1.3:1 (694–894 MHz)
1.15:1 (790–3800 MHz)
700 watts (at 50°C) )
7-16 DIN female
IM3: -150 dBc
-55°C to +60°C
2.1 lb (0.96 kg)
11.3 x 2.6 x 2.4 inches
(286 x 65 x 61 mm)
11.8 x 3 x 3 inches
(300 x 75 x 75 mm)
2.9 lb (1.3 kg)
860 10104
Order Information
Model
860 10100
860 10102
860 10104
860 10101
860 10103
860 10105
Description
2-way RF power divider, 200 watts, N female
3-way RF power divider, 200 watts, N female
4-way RF power divider, 200 watts, N female
2-way RF power divider, 700 watts, 7-16 DIN female
3-way RF power divider, 700 watts, 7-16 DIN female
4-way RF power divider, 700 watts, 7-16 DIN female
Mounting Options
Model
131 1847
Description
Mounting Kit for 2 to 5.7 inch (50 to 145 mm) OD mast.
11051-C
936.2956/b
259
860 10023, K63236001
Continuously Adjustable RF Power Tap
Indoor Applications
Specifications
Frequency range
Power split ratio
continuously adjustable
Impedance
Intermodulation (2x20w)
Insertion loss
VSWR
Maximum input power
Connector
Environmental conditions
Weight
Dimensions
Shipping dimensions
Shipping weight
860 10023
870–960 MHz
1710–2500 MHz
-5 dB to -15 dB
(75 /25 to 97 /3 )
50 ohms
IM3: -150 dBc
0.1 dB
1.7:1 (870–960 MHz)
1.7:1 (1710–2500 MHz)
100 watts (at 50°C)
N female
IP 52
1.1 lb (0.5 kg)
10.4 x 3.9 x 1 inches
(263 x 100 x 25 mm)
10.9 x 4.4 x 1.6 inches
(277 x 111 x 40 mm)
1.5 lb (0.68 kg)
K63236001
790–960 MHz
1710–2170 MHz
-5 dB to -15 dB
(75 /25 to 97 /3 )
50 ohms
IM3: -150 dBc
0.1 dB
2.1:1 (790–824 MHz)
1.7:1 (824–960 MHz)
1.7:1 (1710–2170 MHz)
100 watts (at 50°C)
N female
IP 52
1.1 lb (0.5 kg)
9.3 x 3.9 x 1 inches
(235 x 100 x 25 mm)
9.8 x 4.4 x 4 inches
(249 x 111 x 40 mm)
1.5 lb (0.68 kg)
Excludes connectors.
• DC transmission only between input and port P1.
P2 is coupled capacitively.
Adjust tap to
desired split ratio
P2 Output
Splitting table
P2:Pinput dB
-6.2 (25 )
-10
l l
P1:Pinput dB
-1.2 (75 )
l l
P2:P1 dB
-5
-0.4 (91 )
-10.4 (9 )
-15
-0.1 (97 )
-15.1 (3 )
l l
l
P1 Output
P input
Order Information
260
10827-C
936.3914
936.2261/b
Model
K63236001
860 10023
Description
Adjustable indoor power tap
Adjustable indoor power tap
NEW
Outdoor and Indoor Applications
860 10150, 860 10151, 860 10152
694–2700 MHz RF Low-loss Power Tap
General specifications
Frequency range
Impedance
Intermodulation (2x20w)
Insertion loss
VSWR
694–2700 MHz
Maximum input power
Connector
Antenna connections
Weight
Dimensions
Shipping dimensions
Mounting
Environmental conditions
Specifications
Tap loss
Input l P1
Input l P2
694–2700 MHz
50 ohms
IM3: -150 dBc
0.05 dB
1.5:1
500 watts (at 50°C)
7-16 DIN female
2 ea
2.9 lb (1.3 kg)
9.6 x 3.5 x 2.2 inches
(244 x 90 x 55 mm)
12.2 x 4.4 x 3.7 inches
(310 x 112 x 93 mm
Bracket for wall mounting included.
Optional mount kit for masts of 2 to
5.7 inch (50 to 145 mm) OD is available.
IP 65
860 10150
860 10151
860 10152
-1.0 dB
-7.0 dB
-0.5 dB
-10.5 dB
-0.3 dB
-15.3 dB
Mounting Options
Model
131 1847
Description
Mounting Kit for 2 to 5.7 inch
(50 to 145 mm) OD mast.
Order Information
Model
860 10150
860 10151
860 10152
Description
2-way power tap
2-way power tap
2-way power tap
11423-A
936.4158
261
860 10136, 860 10137, 860 10138
694–2700 MHz RF Power Tap
Indoor Applications
General specifications
Frequency range
Impedance
Intermodulation (2x20w)
Insertion loss
VSWR
694–790 MHz
790–2500 MHz
2500–2700 MHz
Maximum input power
Connector
Weight
Dimensions
Shipping dimensions
Shipping weight
Mounting
Environmental conditions
694–2700 MHz
50 ohms
IM3: -150 dBc
0.05 dB
2.0:1
1.5:1
2.0:1
100 watts (at 50°C)
N female
1.1 lb (0.5 kg)
9.6 x 2.5 x 1 inches
(244 x 64 x 25 mm)
10.5 x 4.4 x 3.7 inches
(267 x 111 x 95 mm
1.5 lb (0.68 kg)
None needed
IP 52
DC transmission only between input and port P1.
P2 is coupled capacitively.
Specifications
Tap loss
Input l P1
Input l P2
860 10136
860 10137
860 10138
-1.0 dB
-7.0 dB
-0.4 dB
-10.4 dB
-0.1 dB
-15.1 dB
P1
P2 P1-(6dB)
Capacitive coupled to input
9.6 inches
(244 mm)
1 inch
(25 mm)
2.5 inch
(64 mm)
Mounting Options
Description
None needed
For indoor use only.
Order Information
Model
860 10136
860 10137
860 10138
262
11246-A
936.3575/a
Description
Indoor power tap
Indoor power tap
Indoor power tap
860 10017, 860 10018, 860 10019
Indoor Applications
694–2700 MHz RF Power Divider
Specifications
Frequency range
Impedance
Insertion loss
Power split ratio
860-10017
860-10018
860-10019
VSWR
MHz
860-10017
860-10018
860-10019
Intermodulation (2x20w)
Maximum input power
Connector
DC capability
694–2700 MHz
50 ohms
0.05 dB
50 /50
33.3 /33.3 /33.3
25 /25 /25 /25
694–864 MHz 790–2500 MHz
Environmental conditions
Weight
Dimensions
Shipping dimensions
Mounting
2500–2700
1.5:1
1.25:1
2.0:1
1.5:1
1.25:1
2.0:1
1.5:1
1.3:1
2.0:1
IM3: -150dBc
100 watts
N female
DC transmission between all terminations
(suitable for remote power supply systems)
IP 52
1.3 lb (0.6 kg)
8 x 2.5 x 1.7 inches (maximum)
(204 x 63 x 44 mm)
9.5 x 4.3 x 3.7 inches (maximum)
(242 x 110 x 95 mm)
For indoor use only. Mounting hardware is not
included.
Kathrein-Scala recommends the use of nylon tie
straps for mounting.
860-10019
860 10019
8 inches
(204 mm)
1 inch
(25 mm)
1 inch
(25 mm)
Mounting Options
Description
For indoor use only.
Mounting hardware is not included.
Kathrein-Scala recommends the use of nylon tie straps for mounting.
Order Information
Model
860 10017
860 10018
860 10019
Description
2-way power divider for indoor use only
3-way power divider for indoor use only
4-way power divider for indoor use only
10819-C
936.2248/c
263
782 1132n series
NEW
698–894 MHz
1710–2400 MHz
Dual-band Combiner
782 11320, 782 11322
Single nit
Specifications
Pass band
Band 1
Band 2
Impedance
VSWR
Insertion loss
Port 1lPort 3
Port 2lPort 3
Port 3lTest (sniffer port
Isolation
Port 1lPort 2
Input power
Band 1 / Band 2
Intermodulation
Operating temperature
Connector
RF
AISG
Test (sniffer) port
Application
DCAISG transparency
Port 1lPort 3
Port 2lPort 3
Port DC/AISGlPort 3
Lightning protection
Weight
Single unit
Double unit
Dimensions
Single unit
Double unit
Mounting
264
11449-A
936.4588
782 11321, 782 11323
Double nit
• Designed for co-siting purposes
• Enables feeder sharing
• Integrated smart bias tee with AISG connector
• BTS version
DC/AISG auto-sense for low band port or high band port
or AISG port. Test (sniffer) port for low band and high band
signals -43...-28 dB
• ANT version
DC stop at low band port and at high band port
• Suitable for indoor or outdoor applications
• Wall or mast mounting
• Available as a single unit, or for XPol antennas as a double unit
• Built-in lightning protection
• Extremely small dimensions and low weight
• Very low insertion loss
• High input power
782 11320 Single nit BTS
782 11321 Double nit BTS
782 11322 Single nit ANT
782 11323 Double nit ANT
698–894 MHz
1710–2400 MHz
50 ohms
1.2:1 (698–894 / 1710–2400 MHz)
698–894 MHz
1710–2400 MHz
50 ohms
1.2:1 (698–894 / 1710–2400 MHz)
0.1 dB (698–894 MHz)
0.1 dB (1710–2400 MHz)
-43 – -28 dB (698–894 / 1710–2400 MHz)
60 dB (698–894 / 1710–2400 MHz)
0.1 dB (698–894 MHz)
0.1 dB (1710–2400 MHz)
60 dB (698–894 / 1710–2400 MHz)
500 watts / 500 watts
160 dBc (3rd order with 2 x 20 W)
-40° to +60° C
500 watts / 500 watts
160 dBc (3rd order with 2 x 20 W)
-40° to +60° C
7-16 DIN female (long neck)
7-16 DIN female (long neck)
8-pin male, IEC 60130-9
(Pin 3: RS485B, pin 5: RS485A, Pin 6: 10-32 V DC,
pin 7: DC return, other pins: not connected)
8-pin female, IEC 60130-9
(Pin 3: RS485B, pin 5: RS485A, Pin 6: 10-32 V DC,
pin 7: DC return, other pins: not connected)
N female (with protection cap IP66)
Indoor or outdoor (IP 66)
Indoor or outdoor (IP 66)
Auto-sense (2000 mA maximum)
Auto-sense (2000 mA maximum)
Auto-sense (2000 mA maximum)
3 kA, 10/350 Ps pulse
Stop
Stop
By-pass (2000 mA maximum)
3 kA, 10/350 Ps pulse
3.3 lb (1.5 kg)
6.4 lb (2.9 kg)
(without connectors or mounting brackets)
5.7 x 5 x 2.5 inches (145 x 126 x 62.5 mm)
5.7 x 5 x 5 inches (145 x 128 x 126 mm)
Mounts to a flat surface with four screws
(max. 8 mm dia). Mounts to 2–5.7 inch
(50–145 mm) OD masts with optional mounting kit.
3.3 lb (1.5 kg)
6.4 lb (2.9 kg)
(without connectors or mounting brackets)
5.7 x 5 x 2.5 inches (145 x 126 x 62.5 mm)
5.7 x 5 x 5 inches (145 x 128 x 126 mm)
Mounts to a flat surface with four screws
(max. 8 mm dia). Mounts to 2–5.7 inch
(50–145 mm) OD masts with optional mounting kit.
782 1132n series
698–894 MHz
1710–2400 MHz
ical
a io
Dual-band Combiner
r
'LDJUDP,3RUWļ3RUW3RUWļ3RUW
Blockdiagramm
698 894
1710 2400
'LDJUDP,,3RUWļ3RUW3RUWļ3RUW
698 894
Type No.
Description
78410367
50-Ohm load
1710 2400
50-Ohm load
Mounting Options
Model
2 x 131 1847
Description
Mounting Kit for 2 to 5.7 inch
(50 to 145 mm) OD mast.
Order Information
Model
782 11320
782 11321
782 11322
782 11323
Description
Single Dual-band combiner - BTS version
Double Dual-band combiner - BTS version
Single Dual-band combiner - ANT version
Double Dual-band combiner - ANT version
265
782 1132n series
Dual-band Combiner
Dimensions 78 113 0
Dimensions 78 113 1
266
698–894 MHz
1710–2400 MHz
698–894 MHz
1710–2400 MHz
782 1132n series
Dual-band Combiner
Dimensions 78 113
Dimensions 78 113 3
267
782 1066n series
470–960 MHz
1710–2700 MHz
Dual-band Combiner
• Designed for cable sharing/reduction in PCS and WiMAX
systems.
• Can be used as a combiner near the BTS or in a reciprocal function
near the antenna.
• Suitable for indoor or outdoor applications.
• Wall or mast mounting.
• Built-in lightning protection.
• External DC stop available as an accessory.
782 10660, 782 10662, 782 10664
Single nit
• Available as a single unit, or for XPol anten-nas as a double unit
• Very low insertion loss.
782 10661, 782 10663, 782 10665
Double nit
470 – 960
470 – 960
1710 – 2700
1710 – 2700
470 – 960 1710 – 2700
Specifications
Pass band
Band 1
Band 2
Impedance
VSWR
Insertion loss
Port 1lPort 3
Port 2lPort 3
Isolation
Port 1lPort 2
Input power
Band 1 / Band 2
Intermodulation
Operating temperature
Connector
Application
470–960 MHz
1710–2700 MHz
50 ohms
1.2:1 (470–960 / 1710–2700)
0.1 dB (470–960 MHz) (0.1 dB typical)
0.1 dB (1710–2700 MHz) (0.1 dB typical)
55 dB (470–960 MHz)
65 dB (1710–2700 MHz)
650 watts / 350 watts
160 dBc (3rd order with 2 x 20 W)
-55° to +60° C
7-16 DIN female (long neck)
Indoor or outdoor (IP 66)
DCAISG transparency
782 10660 Single nit
782 10661 Double nit
782 10662 Single nit
782 10663 Double nit
782 10664 Single nit
782 10665 Double nit
Port 1lPort 3
Port 2lPort 3
Lightning protection
Weight
Single unit
Double unit
Dimensions
Single unit
Double unit
Shipping dimensions
Single unit
Double unit
By-pass (2500 mA maximum)
By-pass (2500 mA maximum)
3 kA, 10/350 Ps pulse
Stop
By-pass (2500 mA maximum)
By-pass (2500 mA maximum)
Stop
2.6 lb (1.2 kg
5.3 lb (2.4 kg)
without connectors or mounting brackets
5.7 x 5 x 1.5 inches (145 x 126 x 38 mm)
5.7 x 5 x 3.7 inches (145 x 126 x 93 mm)
11.2 x 6.2 x 3.7 inches (285 x 157 x 93 mm)
11,2 x 6.2 x 5.8 inches (285 x 157 x 148 mm)
Mounting Options
Model
2 x 131 1847
Description
Mounting Kit (optional) for 2 to 5.7 inch
(50 to 145 mm) OD mast.
Mounts to a flat surface with four screws (max. 8 mm dia).
Mounts to 2 to 5.7 inch (50 to 145 mm) OD masts with optional mounting kit.
See Mechanical Accessories section for more information.
268
11244-B
936.3891/a
782 1066n series
470–960 MHz
1710–2700 MHz
2.1 inches
(53 mm)
Dual-band Combiner
Side view
Single Unit
1.5 inches
(38 mm)
1.4 inches
(35 mm)
Typical Attenuation Curves
3.7 inches
(93 mm)
2.2 inches
(55 mm)
Attenuation/dB
Diagram I
Port 1 j Port 3
Side view
Double Unit
Port 2 j Port 3
0
-10
-20
1710 – 2700
470 – 960
-30
-40
-50
-60
-70
-80
0.8 inches
(21 mm)
0
5 inches
(126 mm)
300
600
900
1200
1500
1800
2100
2400
2700 3000
Frequency/MHz
4.6 inches
(40 mm)
2.4 inches
(60 mm)
-90
-100
Top view
Single Unit,
Double Unit
Diagram II
Port 1 j Port 3
Attenuation/dB
1.4 inches
(35 mm)
Port 2 j Port 3
0
-0.1
-0.2
1710 – 2700
470 – 960
-0.3
-0.4
-0.5
-0.6
-0.7
5.7 inches
(145 mm)
-0.8
-0.9
8.1 inches
(206 mm)
8.8 inches
(224 mm)
-1.0
0
300
600
900
1200
1500
1800
2100
2400
2700 3000
Frequency/MHz
9.6 inches
(244 mm)
Order Information
Model
782 10660
782 10661
782 10662
782 10663
782 10664
782 10665
Description
Single Dualband combiner - By-pass / By-pass
Double Dualband combiner - By-pass / By-pass
Single Dualband combiner - Stop / By-pass
Double Dualband combiner - Stop / By-pass
Single Dualband combiner - By-pass / Stop
Double Dualband combiner - By-pass / Stop
269
782 1068n series
380–960 MHz
1710–2700 MHz
Dual-band Combiner
• Designed for co-siting purposes.
• Enables feeder sharing.
• Can be used as a combiner near the BTS or in a
782 10680, 782 10682
Single nit
380 – 960
782 10681, 782 10683
Double nit
1710 – 2700
Specifications
Pass band
Band 1
Band 2
Impedance
VSWR
Insertion loss
Port 1lPort 3
Port 2lPort 3
Isolation
Port 1lPort 2
Input power
Band 1 / Band 2
Intermodulation
Operating temperature
Connector
Application
DCAISG transparency
Port 1lPort 3
Port 2lPort 3
Lightning protection
Weight
Single unit
Double unit
Dimensions
Single unit
Double unit
Shipping dimensions
Single unit
Double unit
0 – 960
reciprocal function near the antenna.
• Suitable for indoor or outdoor applications.
• Wall or mast mounting.
• Available as a single unit or a double unit for X-Pol
antennas.
• Built-in lightning protection.
• DC stop available as an accessory.
• Extremely low insertion loss.
• High input power.
1710 – 2700
782 10680 Single nit
782 10681 Double nit
782 10682 Single nit
782 10683 Double nit
380–960 MHz
1710–2700 MHz
50 ohms
1.2:1 (380–960 / 1710–2700)
380–960 MHz
1710–2700 MHz
50 ohms
1.2:1 (380–960 / 1710–2700)
0.1 dB (380–960 MHz)
0.1 dB (1710–2700 MHz)
0.1 dB (380–960 MHz)
0.1 dB (1710–2700 MHz)
55 dB (380–550 MHz)
65 dB (550–960 MHz)
65 dB (1710–2700 MHz)
55 dB (380–550 MHz)
65 dB (550–960 MHz)
65 dB (1710–2700 MHz)
700 watts / 700 watts
160 dBc (3rd order with 2 x 20 W)
-55° to +60° C
7-16 DIN female (long neck)
Indoor or outdoor (IP 66)
700 watts / 700 watts
160 dBc (3rd order with 2 x 20 W)
-55° to +60° C
7-16 DIN female (long neck)
Indoor or outdoor (IP 66)
By-pass (2500 mA maximum)
By-pass (2500 mA maximum)
3 kA, 10/350 Ps pulse
Stop
By-pass (2500 mA maximum)
3 kA, 10/350 Ps pulse
4.9 lb (2.2 kg)
9.5 lb (4.3 kg)
4.9 lb (2.2 kg)
9.5 lb (4.3 kg)
9.6 x 5 x 2.1 inches (318 x 122 x 67 mm)
9.6 x 5 x 4.3 inches (318 x 122 x 118 mm)
9.6 x 5 x 2.1 inches (318 x 122 x 67 mm)
9.6 x 5 x 4.3 inches (318 x 122 x 118 mm)
14.4 x 8.1 x 5.9 inches (365 x 207 x 150 mm)
14.4 x 8.1 x 8.4 inches (365 x 207 x 214 mm)
14.4 x 8.1 x 5.9 inches (365 x 207 x 150 mm)
14.4 x 8.1 x 8.4 inches (365 x 207 x 214 mm)
Mounting Options
Model
2 x 131 1847
270
11245-A
936.3749/a
Description
Mounting Kit (optional) for 2 to 5.7 inch
(50 to 145 mm) OD mast.
Mounts to a flat surface with four screws (max. 8 mm dia).
Mounts to 2 to 5.7 inch (50 to 145 mm) OD masts with optional mounting kit.
See Mechanical Accessories section for more information.
782 1068n series
380–960 MHz
1710–2700 MHz
Dual-band Combiner
2.6 inches
(67 mm)
1.9 inches
(49 mm)
Typical Attenuation Curves
1.6 inches
(41 mm)
1.9 inches
(49 mm)
Diagram I
Port 1 j Port 3
Port 2 j Port 3
Diagram II
Port 1 j Port 3
Port 2 j Port 3
4.6 inches
(118 mm)
3.6 inches
(91 mm)
4.8 inches
(122 mm)
8.3 inches
(210 mm)
4 inches
(102 mm)
1.6 inches
(41 mm)
2.5 inches
(64 mm)
10.7 inches
(271 mm)
11.3 inches
(288 mm)
12.5 inches
(318 mm)
1.4 inches
(35 mm)
4 screws M5 x 12
6.9 inches
(176 mm)
Order Information
Model
782 10680
782 10681
782 10682
782 10683
Description
Single Dualband combiner - By-pass / By-pass
Double Dualband combiner - By-pass / By-pass
Single Dualband combiner - Stop / By-pass
Double Dualband combiner - Stop / By-pass
271
782 10809, 782 10810
1850–1910/1930–1990 MHz
1710–1755/2110–2155 MHz
Dual-band Combiner
• Designed for co-siting purposes.
• Enables feeder sharing.
• Suitable for indoor or outdoor applications (IP 66).
• DC pass through between all ports.
• External DC Stop available as an accessory.
Specifications
Pass band
PCS
AWS
Impedance
VSWR
782 10809
Single unit
1850–1910 (Rx) / 1930–1990 (Tx) MHz
1710–1755 (Rx) / 2110–2155 (Tx) MHz
50 ohms
1.25:1 (1850–1910 / 1930–1990 MHz)
1.25:1 (1710–1755 / 2110–2155 MHz)
Insertion loss
Port PCSlPort ANT
Port AWSlPort ANT
Insolation
Port PCSlPort AWS
Input power
Port PCS
Port AWS
Intermodulation
Operating temperature
Connectors
Application
Lightning protection
DC/AISG transparency
Weight
single unit
double unit
Dimensions single unit
double unit
Typical Attenuation Curves
0
1850 – 1910
-20
1710 – 1755
Port
Port
AWS ” ANT
Port PCS ” Port ANT
-10
1930 – 1990
2110 – 2155
-30
50 dB (1850–1910 / 1930–1990 MHz)
50 dB (1710–1755 / 2110–2155 MHz)
250 watts (1850–1910 / 1930–1990 MHz)
250 watts (1710–1755 / 2110–2155 MHz)
-160 dBc (3rd order with 2 x 20 W)
-40° to +65° C
7-16 DIN female (long neck)
Indoor or outdoor (IP 66)
3 kA, 10/350 Ps
By-pass between all ports (max. 2500 mA)
5.5 lb (2.5 kg)
11 lb (5 kg)
11.7 x 4.8 x 2.5 inches (296 x 122 x 64 mm)
11.7 x 4.8 x 4.7 inches (296 x 122 x 120 mm)
(includes mounting bracket)
Diagram II
Attenuation/dB
Attenuation/dB
Diagram I
Port AWS ” Port ANT
0.3 dB (1850–1910 / 1930–1990 MHz)
0.2 dB (1710–1755 / 2110–2155 MHz)
Port
Port
PCS ” ANT
Port
Port
AWS ” ANT
0
-0.1
-0.2
2110 – 2155
1710 – 1755
-0.3
1850 – 1910
-40
-0.4
-50
-0.5
-60
-0.6
-70
-0.7
-80
-0.8
-90
-0.9
1930 – 1990
-100
1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200
-1.0
1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200
Frequency/MHz
Frequency/MHz
Mounting Options
Model
2 x 131 1847
Description
Mounting Kit (optional) for 2 to 5.7 inch
(50 to 145 mm) OD mast.
Mounts to a flat surface with four screws (max. 8 mm dia).
See Mechanical Accessories section for more information.
Order Information
272
11069-A
936.3344
Model
782 10809
782 10810
Description
Dualband combiner, single unit
Dualband combiner, double unit
782 10809, 782 10810
1850–1910/1930–1990 MHz
1710–1755/2110–2155 MHz
Dual-band Combiner
2.5 inches
(64 mm)
4 screws M5 x 10
~ 4 spring washers 5.5 DIN 6095 €
4.7 inches
(120 mm)
~
4 screws M5 x 10
4 spring washers 5.5 DIN 6095
€
4.8 inches
(122 mm)
11.7 inches
(296 mm)
The mounting plates can be removed and
replaced with other means of mounting by
removing the screws c through f(M5 x 10).
Caution Exceeding the maximum drilled
depth of 8.5 mm with replacement
hardware and fasteners may permanently
damage the unit.
Accessories
Model
793 301
Description
DC Stop
273
782 10469, 782 10808
1850–1910/1930–1990 MHz
1710–1755/2110–2155 MHz
Dual-band Combiner
• Designed for co-siting purposes.
• Enables feeder sharing.
• Suitable for indoor or outdoor applications (IP 66).
• With fault detection and integrated switch for multiple DC power
supply.
Specifications
Pass band
PCS
AWS
Impedance
VSWR
782 10469
Single unit
1850–1910 (Rx) / 1930–1990 (Tx) MHz
1710–1755 (Rx) / 2110–2155 (Tx) MHz
50 ohms
1.25:1 (1850–1910 / 1930–1990 MHz)
1.25:1 (1710–1755 / 2110–2155 MHz)
Insertion loss
Port PCSlPort ANT
Port AWSlPort ANT
Insolation
Port PCSlPort AWS
Input power
Port PCS
Port AWS
Intermodulation
Power supply voltage
operational
survival
Polarity protection
Maximum current
Power supply current at PCS port
operating with dummy load
Operating temperature
Connectors
Application
Lightning protection
Weight
single unit
double unit
Dimensions single unit
double unit
0.3 dB (1850–1910 / 1930–1990 MHz)
0.2 dB (1710–1755 / 2110–2155 MHz)
50 dB (1850–1910 / 1930–1990 MHz)
50 dB (1710–1755 / 2110–2155 MHz)
250 watts (1850–1910 / 1930–1990 MHz)
250 watts (1710–1755 / 2110–2155 MHz)
-160 dBc (3rd order with 2 x 20 W)
+10 – +15 V DC (Port PCS)
+10 – +30 V DC (Port AWS)
+10 – +35 V DC
-48 V DC (Port PCS, Port AWS)
1.5 A (Port AWS)
100 mA 20 mA (+10 – +15 V DC)
-40° to +65° C
7-16 DIN female (long neck)
Indoor or outdoor (IP 66)
8/20 Ps, 20 kA 10/350 Ps, 3 kA (Port ANT)
5.5 lb (2.5 kg)
11 lb (5 kg)
11.7 x 4.8 x 2.5 inches (296 x 122 x 64 mm)
11.7 x 4.8 x 4.7 inches (296 x 122 x 120 mm)
(includes mounting bracket)
Mounting Options
Model
2 x 131 1847
Description
Mounting Kit (optional) for 2 to 5.7 inch
(50 to 145 mm) OD mast.
Mounts to a flat surface with four screws (max. 8 mm dia).
See Mechanical Accessories section for more information.
Order Information
274
11068-A
936.3232
Model
782 10469
782 10808
Description
Dualband combiner, single unit
Dualband combiner, double unit
782 10469, 782 10808
1850–1910/1930–1990 MHz
1710–1755/2110–2155 MHz
Dual-band Combiner
2.5 inches
(64 mm)
4 screws M5 x 10
~ 4 spring washers 5.5 DIN 6095 €
4.7 inches
(120 mm)
~
4 screws M5 x 10
4 spring washers 5.5 DIN 6095
€
4.8 inches
(122 mm)
11.7 inches
(296 mm)
The mounting plates can be removed and replaced
with other means of mounting by removing the
screws c through f(M5 x 10).
Caution Exceeding the maximum drilled depth
of 8.5 mm with replacement hardware and
fasteners may permanently damage the unit.
Typical Attenuation Curves
Port
Port
AWS ” ANT
Port PCS ” Port ANT
0
-10
1850 – 1910
-20
1710 – 1755
Diagram II
1930 – 1990
2110 – 2155
-30
Attenuation/dB
Attenuation/dB
Diagram I
Port AWS ” Port ANT
Port
Port
PCS ” ANT
Port
Port
AWS ” ANT
0
-0.1
-0.2
2110 – 2155
1710 – 1755
-0.3
1850 – 1910
-40
-0.4
-50
-0.5
-60
-0.6
-70
-0.7
-80
-0.8
-90
-0.9
1930 – 1990
-100
1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200
Frequency/MHz
-1.0
1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200
Frequency/MHz
275
NEW
782 10524
3 dB Coupler / Hybrid Combiner 2 : 2
698–2690 MHz
Can be used for the decoupled combining of 2 transmitters onto a
common antenna with frequency spacing as narrow as desired (3 dB
loss) – see application example 1
Can be used for the decoupled combining of 2 transmitters onto two
antennas with frequency spacing as narrow as desired – see application
example 2
Can be used as a decoupled 2-way splitter – see application example 3
Can be used as a frequency-independant 90° phase shifter (90° Hybrid)
Suitable for indoor or outdoor applications
DC/AISG by-pass
External DC stop available as an accessory
Port 1
Port 3
Port 2
Specifications
Port 4
Frequency range
Impedance
VSWR
Attenuation)
Port 1lPort 2
Port 1lPort 3
Port 2lPort 3
Directivity
Intermodulation (2x20w)
Input power
Temperature range
Connectors
DC/AISG transparency
Port 1lPort 3
Port 2lPort 4
698–2690 MHz
50 ohms
1.25:1
3.1 0.5 dB
3.1 0.5 dB
See diagram
20 dB
IM3: -160 dBc
150 watts at each input port
-40° to +70° C
7-16 DIN female
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
External DC stop available as an acces-
sory
Application
Weight
Dimensions
i
↔
↔
Indoor or outdoor (IP 66)
3.3 lb (1.5 kg)
8.1 x 4.1 x 2.4 inches
(205 x 104 x 60 mm)
Shipping dimensions
10.6 x 8 x 4.5 inches
(268 x 203 x 115 mm)
Mounting
Mounts to a flat surface with 4 screws
(max. 6.5 mm diameter)
Valid if all ports are terminated with 50 ohm loads
Mounting Options
11427-A
936.4198
276
Description
Mounts to a flat surface with 4 screws (max. 8 mm diameter)
Optional mounting Kit for 2 to 5.7 inch (50 to 145 mm) OD mast
is available.
782 10524
698–2690 MHz
3 dB Coupler / Hybrid Combiner 2 : 2
Accessories order separately
Model
782 10850
782 10474
784 10367
Description
DC stop
50 ohm load (80 W)
50 ohm load (1.5 W)
Order Information
Model
782 10524
Description
Hybrid combiner with 7-16 DIN connectors
277
782 10500, 782 10502
806–960 MHz or
1710–2170 MHz
Hybrid Combiner
Port 3
Designed for the decoupled combining of two transmitter or
receiver signals onto one common antenna.
The frequency spacing between transmitter signals can be as
small as required.
Excellent intermodulation performance.
Suitable for indoor or outdoor applications.
Specifications
Impedance
VSWR (all ports)
Intermodulation (2x20w)
Input power
Port 1
Port 2
Operating temperature
Connector
DC/AISG transparency
Port 1
Port 2
Application
Weight
Dimensions
Shipping dimensions
Mounting
50 ohm
1.15:1
IM3: -160 dBc
60 watts
60 watts
-40° to +55° C
7-16 DIN female (long neck)
By-pass between all ports (max. 2500 mA)
AISG attennuation: 3 dB with external DC
stop (see configuration examples) / 6 dB
without external DC stop
Indoor or outdoor (IP 66)
8.2 lb (3.7 kg)
7.9 x 5.7 x 3.9 inches
(200 x 144 x 98 mm)
14.8 x 9.1 x 7.4 inches
(377 x 232 x 189 mm)
Mounts to a flat surface with 4 screws
(max. 6.5 mm diameter)
Optional mounting Kit for 2 to 5.7 inch
(50 to 145 mm) OD mast is available.
Valid if all ports are terminated with 50 ohm loads
Specifications
Frequency range
VSWR (all ports)
Attenuation
Port 1lPort 3
Port 2lPort 3
Port 1lPort 2
Max. input power per port
Mounted horizontally
Mounted vertically
Max. ambient
temperature
+55 °C
60 W
70 W
+40 °C
+25 °C
70 W
75 W
80 W
85 W
Specifications
Frequency range
VSWR (all ports)
Attenuation
Port 1lPort 3
Port 2lPort 3
Port 1lPort 2
782 10500
806–960 MHz
1.15:1
3.1 0.5 dB
3.1 0.5 dB
23 dB
782 10502
1710–2170 MHz
1.25:1
3.1 0.5 dB
3.1 0.5 dB
22 dB
Port 3
Antenna
Tx1/Tx2/Rx1/Rx2
Order Information
Model
782 10500
782 10502
Description
Hybrid combiner (806–960 MHz)
Hybrid combiner (1710–2170 MHz)
Hybrid Combiner
Mounting Options
11066-A
936.3157/b
278
11067-A
936.3197/b
Port 1
Port 2
Tx1/Rx1
Tx2/Rx2
Description
2 x 131 1487
Mounting Kit for 2 to 5.7 inch
(50 to 145 mm) OD mast.
See Mechanical Accessories section for more information.
782 10500, 782 10502
806–960 MHz or
1710–2170 MHz
t
ti
Hybrid Combiner
it 2
1 1 18 7 l
a
in erte into ot at rear
i e of t e Hy ri
o iner
t
i e ie of a a t
Hy ri
o iner
ounte
3.9 inches
(98 mm)
5.7 inches
(144 mm)
10.2 inches
(258 mm)
279
782 10504
Hybrid Combiner
698–2690 MHz
Designed for the decoupled combining of two transmitter or
receiver signals onto one common antenna.
The frequency spacing between transmitter signals can be as
small as required.
Excellent intermodulation performance.
Suitable for indoor or outdoor applications.
Wall or mast mounting.
DC by-pass between port 1 and port 3.
Specifications
Frequency range
Impedance
VSWR (all ports)
Attenuation
Port 1lPort 3
Port 2lPort 3
Port 1lPort 2
Intermodulation (2x20w)
Input power
Port 1
Port 2
Temperature range
Connectors
DC/AISG transparency
Port 1lPort 3
Port 2lPort 3
Application
Weight
Dimensions
698–2690 MHz
50 ohms
1.2:1 (698–2170 MHz)
1.25:1 (2170–2690 MHz)
3.1 0.5 dB
3.1 0.5 dB
23 dB
IM3: -160 dBc
60 watts
60 watts
-40° to +55° C
7-16 DIN female (long neck)
By-pass (max. 2500 mA)
Stop
Indoor or outdoor (IP 66)
9.5 lb (4.3 kg)
10.9 x 10.4 x 3.3 inches
(276 x 264 x 84 mm)
Shipping dimensions
15.2 x 13.6 x 6.6 inches
(385 x 345 x 168 mm)
Valid if all ports are terminated with 50 ohm loads
Note: The input power rating of 60 W per port is specified at an
ambient temperature of +55 °C with the combiner mounted
vertically, without additional cooling, and while respecting the
safety standard EN IEC 60950 (max. surface temperature
+90 °C). If used at a lower ambient temperature, then a
higher input power in accordance with the following table is
possible:
Max. input power per port
Mounted horizontally
Mounted vertically
55 W
70 W
80 W
60 W
75 W
85 W
Max. ambient
temperature
+55 °C
+40 °C
+25 °C
Mounting Options
11358-A
936.3737
280
Description
Mounts to a flat surface with 4 screws (max. 8 mm diameter)
Optional mounting Kit for 2 to 5.7 inch (50 to 145 mm) OD mast
is available.
782 10504
698–2690 MHz
Hybrid Combiner
3.3 inches
(84 mm)
10.4 inches
(264 mm)
10.9 inches
(276 mm)
281
792 699
806–960 MHz
Indoor Use
Hybrid Combiner
The hybrid combiner with cable absorber is suitable for combining 2 transmitters or 2
transmitter groups (transmitter combiners) to one common antenna while achieving very
low intermodulation. The frequency spacing between the transmitting frequencies can be
as narrow as required. For technical reasons half the signal power (3 dB) is dissipated by
the cable absorber.
Design and Construction: The hybrid combiner with cable absorber consists of a 3 dB
coupler and a 10 watt load with an inserted 20 dB attenuation cable.
Function: The 20 dB attenuation cable causes the transmission signals to be highly
attenuated before they reach the load. Thus only intermodulation products of a very low
level can be generated at the load, which are further reduced by 20 dB in the attenuation
cable on the return path to the antenna output.
Specifications
Frequency range
Impedance
VSWR
Attenuation
Port 1lPort 3
Port 2lPort 3
Port 1lPort 2
Intermodulation (2x20w)
Input power
Port 1
Port 2
Operating temperature
Connector
Application
Attenuation
Port 1lPort 3
Port 2
Dimensions
Weight
806–960 MHz
50 ohms
1.11:1
3.1 0.4 dB
3.1 0.4 dB
27 dB
IM3: -160dBc
150 W (with max. 16 signals)
150 W (with max. 16 signals)
-20° to +50° C
7/16 DIN female
Indoor
By-pass (max. 2500 mA)
Short circuit
(External DC stop available as accessory)
14.6 x 13.8 x 9.2 inches
(444 x 356 x 64 mm)
22.7 lb (10.3 kg)
Tx1 o Antenna Port
Tx2 o Short (ground)
Mounting
Mounts to a flat surface using four screws and spacers, or 19 inch rack
mounting (2 height units necessary)
Valid if all ports are terminated with 50: loads (see diagram)
Note: The input power rating of 150 W per port is specified at an ambient temperature of +55 °C with
the combiner mounted vertically (see photo), without additional cooling, and while respecting
the safety standard EN IEC 60950 (max. surface temperature +90 °C).
Special features
When installed in a 19 rack, it must be ensured that the max. power of 150 W is sufficiently
dissipated, so that the ambient temperature does not rise above +50 °C. This can be achieved
for example by the additional installation of a correspondingly dimensioned ventilator in the 19
rack or by reducing the maximum input power.
Mounting Options
282
10654-B
936.1659/g
Description
Mounts to a flat surface using four screws and spacers, or 19
inch rack mounting (2 height units necessary)
792 699
806–960 MHz
Hybrid Combiner
A
B
C
O
P
K
D
E
L
S
M
G
N
T
H
I
Dimension
Inches
mm
17 5
444
16 6
421
05
11 5
37
94
56
143
12
30
19
47
52
132
65
164
12 4
316
13 2
336
‡03
‡7
02
5
04
10
23
58 5
02
4
11 8
300
1
24 5
07
18
2
51
Typical attenuation Tx/Rx1 ”Tx/Rx2
vs. Antenna VSWR
Attenuation
Tx/Rx1
” Tx/Rx2
/ dB
Attenuation
Tx1 j
Tx2 / dB
F
R
25
20
15
1.0
1.5
2.0
Antenna
VSWR
Antenna
VSWR
283
793 555
800–2200 MHz
Indoor Use
3 dB Coupler with Cable Absorber
The 793 555 3 dB Coupler with Cable Absorber is designed
to combine two BTS (Base Tranceiver Stations) onto one
antenna to save feeder cable and antenna costs.
• As opposed to standard absorbers, the 793-555 Cable
Absorber provides excellent intermodulation performance.
• The frequency spacing between transmitter signals can be
as small as required.
• DC signals at the Tx1 port are passed to the antenna port.
• DC signals at the Tx2 port are short-circuited.
For indoor use only.
Note:
The 3-dB Coupler with Cable Absorber is designed for a max. input
power of 150 W per input (in total 300 W). Wall-mounting of the
device is recommended with the cooling ribs running in a vertical
direction (see photo) in order to dissipate the max. heat power of
150 W and not to over-heat the unit.
4YPICALATTENUATION4X¢4X
VS!NTENNA6372
When installed in a 19 rack, it must be ensured that the max. heat
power of 150 W is sufficiently dissipated, so that the ambient
temperature does not rise above +50° C. This can be achieved
for example by the additional installation of a correspondingly
dimensioned ventilator in the 19 rack or by reducing the maximum
input power.
The max. connector coupling torque of 18.4 ft-lb (25 Nm) is not to be
exceeded.
Specifications
Frequency range
Attenuation
Tx1oAntenna
Tx2oAntenna
Tx1lTx2
800–2200 MHz
Impedance
50 ohms
VSWR
13.2 inches
(336 mm)
3 1.2 dB
3 1.2 dB
See diagram
1.2:1
Intermodulation (2x20w)
Maximum input power
IM3: -160 dBc
150 watts
per Tx port with max. 16 signals
at each port
Connectors
7-16 DIN female
Temperature range
-20° to +50° C
Weight
21.6 lb (9.8 kg)
Dimensions
17.5 x 13.2 x 2.5 inches
(444 x 336 x 64 mm)
Shipping dimensions
20.1 x 16.1 x 3.9 inches
(510 x 410 x 100 mm)
VSWR and attenuation values are measured when the remaining
ports are terminated with 50 ohm loads
17.5 inches
(444 mm)
2.5 inches
(64 mm)
Mounting Options
284
10863-B
936.2425/d
Description
Wall mount using four screws (max. 7mm dia.).
19 inch rack mount on pre-installed 19 inch sliding bars (2 height
units required).
792 702
1700–2200 MHz
Indoor Use
3 dB Coupler with Cable Absorber
The 792 702 3 dB Coupler with Cable Absorber is designed
to combine two BTS (Base Tranceiver Stations) onto one
antenna to save feeder cable and antenna costs.
• As opposed to standard absorbers, the 792-702 Cable
Absorber provides excellent intermodulation performance.
• The frequency spacing between transmitter signals can be as
small as required.
• DC signals at the Tx1 port are passed to the antenna port.
• DC signals at the Tx2 port are short-circuited.
For indoor use only.
Note:
The 3-dB Coupler with Cable Absorber is designed for a max. input
power of 100 W per input (in total 200 W). Wall-mounting of the device
is recommended with the cooling ribs running in a vertical direction
(see photo) in order to dissipate the max. heat power of 100 W and
not to over-heat the unit.
When installed in a 19 rack, it must be ensured that the max. heat
power of 100 W is sufficiently dissipated, so that the ambient
temperature does not rise above +50° C. This can be achieved
for example by the additional installation of a correspondingly
dimensioned ventilator in the 19 rack or by reducing the maximum
input power.
4YPICALATTENUATION4X¢4X
VS!NTENNA6372
The max. connector coupling torque of 18.4 ft-lb (25 Nm) is not to be
exceeded.
Specifications
Frequency range
Attenuation
Tx1oAntenna
Tx2oAntenna
Tx1lTx2
1700–2200 MHz
Impedance
50 ohms
VSWR
3 0.4 dB
3 0.4 dB
See diagram
1.15:1
Intermodulation (2x20w)
Maximum input power
IM3: -160 dBc
150 watts
per Tx port with max. 16 signals
at each port
Connectors
7-16 DIN female
Temperature range
-20° to +50° C
Weight
21.6 lb (9.8 kg)
Dimensions
17.5 x 13.2 x 2.5 inches
(444 x 336 x 64 mm)
Shipping dimensions
20.1 x 16.1 x 3.9 inches
(510 x 410 x 100 mm)
VSWR and attenuation values are measured when the remaining
ports are terminated with 50 ohm loads
Mounting Options
Description
Wall mount using four screws (max. 7mm dia.).
19 inch rack mount on pre-installed 19 inch sliding bars
(2 height units required).
13.2
13.2 inches
inches
(336 mm)
(336
mm)
17.5 inches
(444 mm)
2.5
2.5 inches
inches
(64 mm)
mm)
(64
10858-B
936.1941/c
285
860 10142
1575.42 MHz
L1-signal
Low Noise GPS Amplifier
The Kathrein 860 10142 low noise amplifier is designed for use with train
antennas with GPS. It includes a preselection filter to prevent interference in
case of simultaneous operation in the 380–960 MHz / 1710–3800 MHz and
GPS frequency ranges. The amplifier fulfills the requirements according to
EN 50155.
Additional features:
The maximum input power at the input of the amplifier at the frequency
range 380–960 MHz and 1710–3800 MHz is limited to +25 dBm.
The noise level at the GPS frequency generated by the operation at the
frequency range 380–960 MHz and 1710–3800 MHz should not exceed the
thermal noise level at the input of the GPS amplifier, otherwise the noise
figure will be increased.
Environmental conditions:
Temperature range: –25 °C – +55 °C (data as specified)
–40 °C – +85 °C (extended range)
Protection class:
IP54 (DIN 40050 / IEC 144)
(hanging installation position)
Extended range of operation: Within an extended temperature range of
–40 °C – +85 °C and an extended supplied voltage range of 3.0 V– 6.0 V
operation is possible with the following restrictions:
Noise figure: 2.5 dB
Gain: 20 dB
2.8 inches
(70 mm)
Specifications
2.1 inches
(53 mm)
0.9 inches
(22 mm)
Frequency range
Gain
Noise figure
VSWR
Operation voltage
Input (Antenna)
Operation current
Connectors
TNC
Dimensions
Mounting
3.7 inches
(93 mm)
1575.42 MHz, L1-signal
25 2 dB
2.0 dB
1.8:1
3.3–5.5 V, ripple 50 mV
supplied at inner conductor
RF-output
25 mA
TNC female (input)
N female (output)
2.8 x 1.2 x 0.9 inches (70 x
50 x 22 mm)
4 holes, 4.5 mm diameter
Block Diagram
1.2 inches
(50 mm)
lowpass
N
bandpass
filter GPS
amplifier
bandpass
filter GPS
amplifier
ceiling
bottom
top
Hanging installation position
Mounting Options
11205-B
936.3545/a
bias-T
Output
N female
Input
TNC female
Output
(DC +3.0 ... 5.5 V)
286
bandpass
filter GPS
Description
Mount using 4 holes, 4.5 mm diameter
792 544
1850–1910 MHz
1930–1990 MHz
Indoor Use
Duplexer with Built-in DC Stop
The duplexer is designed to combine/split Tx and Rx signals
to/from one common Tx/Rx antenna in order to save feeder
cable and antenna costs
It features:
• Built-in DC stop.
Specifications
Frequency range
Low band
High band
Impedance
VSWR
Insertion loss
AntennaoLow band
High bandoAntenna
Isolation
Low bandlHigh band
Maximum input power
Intermodulation (2x20w)
Temperature range
Connectors
Application
Dimensions
1850–1910 MHz
1930–1990 MHz
50 ohms
1.25:1
0.7 dB
0.7 dB
65 dB
300 watts (low or high band)
IM3: -160 dBc
-20° to +55° C
7-16 DIN female
Indoor
7.9 x 7.6 x 1.7 inches
(200 x 192 x 43 mm)
Weight
3.7 lb (1.7 kg)
Shipping dimensions
11.1 x 9.9 x 4.5 inches
(282 x 252 x 114 mm)
Mount using four screws
Mounting
(max. 4 mm diameter)
Includes connectors and mounting feet
4YPICAL!TTENUATION#URVES
$IAGRAM)
!TTENUATIOND"
!NTENNA ¡ ,OWBAND
(IGHBAND¡ !NTENNA
n
n
&REQUENCY-(Z
1.7 inches
(43 mm)
7.6 inches
(192 mm)
$IAGRAM))
!TTENUATIOND"
!NTENNA ¡ ,OWBAND
7.9 inches
(200 mm)
(IGHBAND¡ !NTENNA
n
n
Low Band
Antenna
High Band
&REQUENCY-(Z
Mounting Options
Description
Mount using four screws (max. 4 mm diameter).
10867-B
936.2464/b
287
793 554
800–2200 MHz
Indoor or Outdoor Use
3 dB Coupler (90° Hybrid)
The 3-dB coupler can be used:
• As a decoupled power spliter with a ratio of 1:1
• For the decoupled combining of two transmitters with a
frequency spacing as narrow as desired (at 3 dB loss)
• For the decouped combining of two receivers with frequency
spacing as narrow as desired
• For the decoupled combining of two transmitter/receiver units,
whose integrated duplexers are within the same frequency
range
• As a frequency-independent 90° phase shifter
• As a component to form combiners
Function:
The 3-dB coupler has four ports, two of which are decoupled
from each other. For example, effective power entering into
port 1 is distributed into ports 2 and 3. Port 4 is decoupled and
without power if ports 2 and 3 are ideally matched. In practice
an absorber of suitable power at port 4 is to be planned in
accordance with the mismatch of ports 2 and 3.
Decoupled combining can be achieved via the diagonally
opposite ports 2 and 3 or 1 and 4.
For indoor or outdoor use (IP66).
Specifications
!TTENUATION¢D"
!TTENUATION¢D"
$IAGRAM)
4YPICALATTENUATIONBETWEENPORTS
¢RESP¢VSFREQUENCY
¢
800–2200 MHz
1.2:1
50 ohms
3 1.2 dB (see diagram I)
See diagram II
Directivity
Maximum input power
¢
$IAGRAM))
4YPICALATTENUATION¢ VS6372ATPORT
!TTENUATION¢D"
Frequency range
VSWR
Impedance
Attenuation 1l2 / 1l3
Attenuation 2l3
20 dB
300 watts total power two inouts
with max. 200 watts at one input
Intermodulation (2x20w)
IM3: -160 dBc
Temperature range
-30 to +70° C
Connector
7-16 DIN female
Weight
2.9 lb (1.3 kg)
Dimensions
4.1 x 3.7 x 2.1 inches
including connectors
(105 x 94 x 53 mm)
Shipping dimensions
6.3 x 3.7 x 2.6 inches
(160 x 95 x 65 mm)
VSWR and attenuation values are measured when the remaining
ports are terminated with 50 ohm loads.
288
10862-A
936.2235/c
6372ATPORT
WITH7LOADATPORT
Mounting Options
Description
Mount using two screws (max. 5.5 mm diameter).
793 006
1700–2200 MHz
Indoor or Outdoor Use
3 dB Coupler
The 3-dB coupler can be used:
• As a decoupled power spliter with a ratio of 1:1
• For the decoupled combining of two transmitters with a
frequency spacing as narrow as desired (at 3 dB loss)
• For the decoupled combining of two receivers with frequency
spacing as narrow as desired
• For the decoupled combining of two transmitter/receiver units,
whose integrated duplexers are within the same frequency
range
• As a frequency-independent 90° phase shifter
• As a component to form combiners
Function:
The 3-dB coupler has four ports, two of which are decoupled
from each other. For example, effective power entering into
port 1 is distributed into ports 2 and 3. Port 4 is decoupled and
without power if ports 2 and 3 are ideally matched. In practice
an absorber of suitable power at port 4 is to be planned in
accordance with the mismatch of ports 2 and 3.
Decoupled combining can be achieved via the diagonally
opposite ports 2 and 3 or 1 and 4.
For indoor or outdoor use (IP66).
$IAGRAM)
1700–2200 MHz
1.15:1
50 ohms
3 0.4 dB (see diagram I)
See diagram II
Directivity
Maximum input power
25 dB
300 watts total power two inouts
with max. 200 watts at one input
Intermodulation (2x20w)
IM3: -160 dBc
Connector
7-16 DIN female
Weight
2.9 lb (1.3 kg)
Dimensions
3.7 x 3.5 x 2.4 inches
including connectors
(94 x 88 x 60 mm)
Shipping dimensions
6.3 x 3.7 x 2.6 inches
(160 x 95 x 65 mm)
VSWR and attenuation values are measured when the remaining
ports are terminated with 50 ohm loads.
!TTENUATION¢D"
Frequency range
VSWR
Impedance
Attenuation 1l2 / 1l3
Attenuation 2l3
!TTENUATION¢D"
Specifications
4YPICALATTENUATIONBETWEENPORTS
¢RESP¢VSFREQUENCY
¢
¢
&REQUENCY-(Z
$IAGRAM))
!TTENUATION¢D"
4YPICALATTENUATION¢ VS6372ATPORT
6372ATPORT
WITH7LOADATPORT
Mounting Options
Description
Mount using two screws (max. 5.5 mm diameter).
10860-A
936.2072/b
289
50 OHM RF LOADS
0 to 4000 MHz
Indoor Use
50 Ohm RF Loads
Kathrein RF loads are manufactured to the most exacting standards and
are highlighted by the following features:
• excellent impedance match over a wide frequency range
• loads 10 watts and larger provide a high degree of RF shielding and
stability due to the aluminum enclosure
784 10367
T50M7/1.5
• convection cooling permits installation in any attitude
K6226111
T50MN/2
Specifications:
Power
Frequency
Rating
Range
0.5 watt
0–2700 MHz
1.5 watt
0–4000 MHz
VSWR
1.08:1 (0–1000 MHz)
1.15:1 (1000–2000 MHz)
1.2:1 (2000–2700 MHz)
1.1:1 (0–2000 MHz)
1.3:1 (2000–4000 MHz)
• 50 and 100 watt units can be panel mounted to further aid equipment
cooling
• 1.5 watt model IP rated IP65 for outdoor use, all other models for indoor
use only
Connector
Dimensions
Weight
Model
N male
1.3 in. long, 0.8 in. diameter
33 mm long, 21 mm diameter
0.09 lb
0.04 kg
K6226611
7-16 male
1.6 in. long, 1.3 in. diameter
40 mm long, 32 mm diameter
1.6 in. long, 1.1 in. diameter
40 mm long, 29 mm diameter
1.3 in. long, 0.8 in. diameter
33 mm long, 21 mm diameter
0.27 lb
0.12 kg
0.27 lb
0.12 kg
0.09 lb
0.04 kg
784 10367
3.3 x 3.2 x 1.6 inches
85 x 82 x 40 mm
3.2 x 3 x 1.6 inches
82 x 77 x 40 mm
4.8 x 3.7 x 1.4 inches
121 x 94 x 35 mm
4.4 x 3.7 x 1.4 inches
113 x 94 x 35 mm
0.55 lb
0.25 kg
0.55 lb
0.25 kg
1.1 lb
0.5 kg
1.1 lb
0.5 kg
K6226411
4.9 x 1.4 x 3.7 inches
124 x 94 x 35 mm
4.9 x 3.7 x 1.4 inches
125 x 94 x 35 mm
5.4 x 3.5 x 2.6 inches
138 x 90 x 67 mm
5.1 x 3.5 x 2.6 inches
130 x 90 x 67 mm
1.1 lb
0.5 kg
1.1 lb
0.5 kg
1.8 lb
0.8 kg
1.8 lb
0.8 kg
K6226217
5.2 x 3.5 x 2.6 inches
133 x 90 x 67 mm
5.3 x 3.5 x 2.6 inches
134 x 90 x 67 mm
8.5 x 5.7 x 3.1 inches
(216 x 144 x 79 mm)
6.3 x 6.1 x 4.5 inches
161 x 156 x 114 mm
1.8 lb
0.8 kg
1.8 lb
0.8 kg
6.8 lb
3.1 kg
5.3 lb
2.4 kg
6.1 x 6 x 4.5 inches
156 x 153 x 114 mm
6.7 x 6.1 x 4.5 inches
170 x 156 x 114 mm
Includes connector length
5.3 lb
2.4 kg
5.3 lb
2.4 kg
7-16 female
2 watt
0–2700 MHz
10 watt
0–2700 MHz
25 watt
0–2700 MHz
1.08:1 (0–1000 MHz)
1.15:1 (1000–2000 MHz)
1.2:1 (2000–2700 MHz)
1.08:1 (0–1000 MHz)
1.15:1 (1000–2000 MHz)
1.2:1 (2000–2700 MHz)
N male
1.08:1 (0–1000 MHz)
1.15:1 (1000–2000 MHz)
1.2:1 (2000–2700 MHz)
N male
N male
N female
N female
7-16 male
7-16 female
50 watt
0–2700 MHz
1.08:1 (0–1000 MHz)
1.15:1 (1000–2000 MHz)
1.2:1 (2000–2700 MHz)
N male
N female
7-16 male
7-16 female
80 watt
698–2700 MHz
1.12:1
7-16 female
100 watt
0–1000 MHz
1.08:1
N male
N female
7-16 female
Power rating at 40°C ambient temperature.
The maximum power rating increases or decreases
with falling or rising ambient temperature.
K6226401
T50FN/10
290
10471-C
936.131/i
K6226201
T50FN/25
K6226301
T50FN/50
782 10474
784 10470
K6226111
K6226401
K6226211
K6226201
K6226207
K6226311
K6226301
K6226317
K6226307
782 10474
K6226511
K6226501
K6226507
K6226501
T50FN/100
NEW
10–10000 MHz
SI 1000
RF Radiation Monitor
SI 1000 RF safety monitors are an effective and economical means
to monitor the strength of electromagnetic (RF) fields from mobile
phone towers, microwave ovens, radio and television installations,
high frequency welders, and other common workplace RF sources
between 10 and 10,000 MHz.
The SI 1000 personal RF Monitor is essential RF safety equipment in
complying with FCC, OSHA, and other safe workplace requirements.
• Alerts to RF Hazards
• Meets FCC, OSHA, WHO Standards
• Visual and Audio Alarms
• Wide RF Range
• Rugged Construction
Specifications
Frequency range
Frequency profile
Abs. accuracy
Indicated power
Field strength
Dynamic range
Audio alarm intensity
Timed sleep mode
Power supply
Battery life, w/o audio alarm
EMI/RFI
Dimensions W x H x D
Weight with batteries
Oper. temperature
Color
10 –10000 MHz
ICNIRP - IEEE
400–2500 MHz 6 dB
0.1–10 mW/cm2
19 –194 V/m
30 dB
80 dBa
5 minutes
3 Volt (2 x AAA)
+500 days
EN55022/B
2.3 x 4.2 x 0.9 inch
(58 x 105 x 23 mm)
3oz (88 grams)
-10 to +40 °C (10 to +104 °F)
Black & Grey
A Member Of The Kathrein Group
11374-A
291
782 11293
NEW
7-16 DIN Protection Cap
• Protection cap IP68 for 7-16 DIN connectors
Specifications
Material
Application
Temperature range
Weight
Dimensions
292
11458-FRO
936.A3078
Brass, silver-plating
Indoor or outdoor (IP68)
-55 – +70° C
2.1 oz (60 g)
0.87 / 1.3 inches (diameter)
(22 / 32 mm) (diameter)
Mechanical Accessories
Mounting Configurations
698 - 960 MHz Panels
1710 - 3800 MHz Panels
................................................................................................................................................................
.......................................................................................................................................................
295
296
Mounting Kit Options for Panel Antennas
1 x 738 546
2 x 738 546
3 x 738 546
1 x 131 1847
2 x 131 1847
850 10002
850 10003
297
297
297
297
297
297
297
Tilt Kit Options for Panel Antennas
840 90013
850 10007
850 10013
298
298
298
3-Sector Panel Mounting Brackets
742 033
742 034
742 263
742 317
850 10058
850 10059
300
300
300
300
300
300
Dimensions of Panel Profiles
302
..........................................................................................................................................................................................................
..........................................................................................................................................................................................................
..........................................................................................................................................................................................................
.....................................................................................................................................................................................................
.....................................................................................................................................................................................................
...............................................................................................................................................................................................................
...............................................................................................................................................................................................................
...............................................................................................................................................................................................................
...............................................................................................................................................................................................................
...............................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
...............................................................................................................................................................................................................
...............................................................................................................................................................................................................
.......................................................................................................................................................
3-Sector DTMA Mounting Brackets
782 10347, 782 10348, 782 10349
................................................................................................................
305
306
306
Mounting Kit Options for Omni & Directional Antennas
Mounting Matrix
MKPP-23
MKPS-1
MKPS-2
MKPS-3
MKPS-4
MKPS-5
MKPS-13
MKPX-2
MKPX-3
MKPX-4
MKPX-5
MKPX-6
MKPX-9
MKPX-10
MKPX-11
MKPX-12
307
308
308
308
308
308
308
308
308
309
309
309
309
308
309
309
309
Tilt Kit Options for Omni & Directional Antennas
MKTB-1
MKTB-3
309
309
Azimuth Adjustment Kits for Panel Antennas
850 10014
850 10015
850 10016
850 10017
310
310
310
310
...............................................................................................................................................................................................................
...............................................................................................................................................................................................................
.........................................................................................................................................................................................
...................................................................................................................................................................................................................
........................................................................................................................................................................................................................
........................................................................................................................................................................................................................
........................................................................................................................................................................................................................
........................................................................................................................................................................................................................
........................................................................................................................................................................................................................
...................................................................................................................................................................................................................
........................................................................................................................................................................................................................
........................................................................................................................................................................................................................
........................................................................................................................................................................................................................
........................................................................................................................................................................................................................
........................................................................................................................................................................................................................
........................................................................................................................................................................................................................
...................................................................................................................................................................................................................
...................................................................................................................................................................................................................
...................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
.......................................................................................................................................................................................................................
..............................................................................................................................................................................................................
..............................................................................................................................................................................................................
..............................................................................................................................................................................................................
..............................................................................................................................................................................................................
Mechanical
Accessories
Dual Panel Mounting Kits
850 10075
850 10076
293
Mechanical
Accessories
Mechanical Accessories
294
Mounting Configurations for Panel Antennas
698–960 MHz
Standard Mount
Mechanical Tilt
Using 1 x 738 546, 2 x 738 546, 3 x 738 546
mounting kits.
Using 850 10013 and 737 976 tilt mount kits.
Mounting for 2 to 4.6 inch
(50 to 115 mm) OD mast
Sector Mount
Using 742 033, 742 263, 742 034 mounting kits.
Mounting for 2.375 to 6 inch
(60 to 152 mm) OD mast
295
Mounting Configurations for Panel Antennas
1710–3800 MHz
Small Panel
Medium and Large Panel
Using 2 x 131 1847 mounting kit.
Using 2 x 738 546 mounting kit.
(optional mounting for any PCS panel)
Standard Tilt
Using 850 10013 tilt mount kit.
296
Mounting Kits
Mounting Kit Options for Panel Antennas
1 x 738 546
2 x 738 546
1 x 738 546
2 x 738 546
3 x 738 546
850 10002
850 10003
1 x 131 1847
2 x 131 1847
for use with most 1-point mount Cellular
panel antennas
Mast dia. 2–4.5 inches (50–115 mm)
Weight 2 lb (0.9 kg)
3 x 738 546
for use with 2-point mount panel antennas
48 inches (1219 mm) long
ships in sets of 2 brackets
Mast dia. 2–4.5 inches (50–115 mm)
Weight 4 lb (1.8 kg)
1 x 131 1847
for use with 1-point mount PCS panel antennas
48 inches (1219 mm) long
and accessories
Mast dia. 2–5.7 inches (50–145 mm)
for use with most 3-point mount panel antennas
ships in sets of 3 brackets
Mast dia. 2–4.5 inches (50–115 mm)
Weight 6 lb (2.7 kg)
2 x 131 1847
for use with 2-point mount PCS panel antennas
48 inches (1219 mm) long
and accessories
Mast dia. 2–5.7 inches (50–145 mm)
850 10002
Mounting clamp for 4.3–8.7 inch
(110–220 mm) OD steel mast
11.9 lb (5.4 kg).
850 10003
Mounting clamp for 8.3–15 inch
(210–380 mm) OD steel mast.
21.2 lb (9.6 kg).
297
NEW
Tilt Mount Kits
Tilt Kit Options for Panel Antennas
850 10013
840 90013
850 10008
64–72 mm
M8
850 10013
for use with 2-point mount panel antennas
48 inches (1219 mm) long
Note 3-point point panel antennas require an
additional 840 90013 bracket
72 mm
M8
850 10008
for use with 2-point mount
Cellular and Dualband panel antennas
from 55–110 lb (25–50 kg)
298
Tilt Mount Kits
Tilt Kit Options for Panel Antennas
Model
Description
850 10013
Locking Tilt Mount Kit for use with 2-point mount
50.9–51 inch (1294–1296 mm) panel antennas, 0–15 degrees downtilt angle
76–76.3 inch (1930–1936 mm) panel antennas, 0–11 degrees downtilt angle
101.6 inch (2580 mm) panel antennas, 0–8 degrees downtilt angle
7.4 lb (3.7 kg)
Weight
Material
Fasteners
840 90013
Weight
Material
Fasteners
850 10008
Weight
Material
Fasteners
Hot-dip galvanized steel
Stainless steel
Locking Tilt Mount Bracket for use with 850 10013 to change from 2-point to 3-point mount
5.1 lb (2.3 kg)
Hot-dip galvanized steel
Stainless steel
Heavy-duty Tilt Mount Kit for use with 2-point mount panel antennas 55–110 lb (25–50 kg)
downtilt angle dependent on antenna length.
9.5 lb (4.3 kg)
Hot-dip galvanized steel
Stainless steel
299
NEW
3-Sector Panel Mounting Brackets
742 263
742 317
742 033
742 034
850 10058
850 10059
These Kathrein sector panel mounting brackets feature:
O
Slim and unobtrusive design.
O
Nearly cylindrical optical appearance with a small outer diameter.
O
Suitable for all Panels with an antenna housing width less than 400 mm
(Hmax).
Note: Contact Kathrein Scala about mounting panels with connectors on
the rear side.
Specifications
Angle between antennas
Number of pieces
Weight
Materials
3 sector clamp
Mounting support clamp
Fasteners
120°
2 x 3 sector clamp
2 x mounting support clamp
8.8 lb (4 kg)
Hot-dip galvanized steel
Aluminum
Hot-dip galvanized steel and
stainless steel
Customer assumes all responsibility to ensure that the mounting pipe is adequate
to support the intended load. For use with steel pipe only (not aluminum) with a
minimum 0.25 inch (6 mm) wall thickness.
Dimensions
742 263
inches
mm
A
3.5
88.9
B
2.6
65
C
7.1
180
D
6.6
168
E
2.5
64
F
2
50
G
1.8
45
Hmax
11
280
Windload
Category
Light or
Medium
742 317
inches
mm
3.5
88.9
3.5
88
8.4
213
7.8
199
2.5
64
2
50
1.8
45
14.2
361
Light or
Medium
742 033
inches
mm
4.5
3.6
114.3 92
8.5
217
8.1
207
2.5
64
2
50
1.8
45
14.8
375
Light or
Medium
742 034
inches
mm
5.5
3.9
139.7 100
9.3
236
9
228
2.5
64
2
50
1.8
45
15.7
400
Light or
Medium
850 10058
inches
mm
4.5
3.6
114.3 92
8.5
217
8.1
207
2.5
64
2
50
1.8
45
14.8
375
Heavy
850 10059
inches
mm
5.5
3.9
139.7 100
9.3
236
9
228
2.5
64
2
50
1.8
45
15.7
400
Heavy
Dout is determined by the mounted components.
300
3-Sector Panel Mounting Brackets
742 263
742 317
742 033
742 034
850 10058
850 10059
M
60°
ector c a
or ue 1 4 ft
25
Dout
or ue 5 2 ft
7
ax
y
Hm
Mountin u ort c a
u ort t e antenna a e
urin azi ut a u t ent
301
Dimensions of Panel Profiles
PA1
5.39 inches
(137 mm)
PC1
10.51 inches
(267 mm)
10.63 inches
(270 mm)
PC2
PA2
5.04 inches
(128 mm)
6.34 inches
(161 mm)
4.33 inches
(110 mm)
10.2 inches
(259 mm)
10.63 inches
(270 mm)
4.49 inches
(114 mm)
PC3
PA3
6.73 inches
(171 mm)
11.93 inches
(303 mm)
10.63 inches
(270 mm)
PC4
PA4
6.93 inches
(176 mm)
4.49 inches
(114 mm)
10.2 inches
(259 mm)
12.13 inches
(308 mm)
PA5
10.59 inches
(269 mm)
302
6.65 inches
(169 mm)
Note: The dimensions listed here show the
maximum outside dimensions including
mounting brackets, end caps, etc. and
therefore may not match dimensions
shown on individual data sheets.
Dimensions of Panel Profiles
PF8
1.97 inches
(50 mm)
PF1
6.42 inches
(163 mm)
3.82 inches
(97 mm)
12.99 inches
(330 mm)
2.52 inches
(64 mm)
PF2
PF9
6.42 inches
(163 mm)
3.82 inches
(97 mm)
6.1 inches
(155 mm)
3.11 inches
(79 mm)
PF3
10.63 inches
(270 mm)
PF10
6.1 inches
(155 mm)
2.52 inches
(64 mm)
PF4
6.42 inches
(163 mm)
PF11
3.27 inches
(83 mm)
PF5
3.43 inches
(87 mm)
4.25 inches
(108 mm)
6.1 inches
(155 mm)
6.38 inches
(162 mm)
3.47 inches
(88 mm)
PF6
8.11 inches
(206 mm)
PF7
3.54 inches
(90 mm)
12.05 inches
(306 mm)
303
Dimensions of Panel Profiles
Dout
742 263
Mast dia. 3.5 (88.9 mm)
Dout
742 033
4.5 (114.3 mm)
Dout
742 034
5.5 (139.7 mm)
Profile
Width
Depth
PA1
10.63 inches
(270 mm)
5.39 inches
(137 mm)
Not
Recommended
18.1 inches
(460 mm)
19 inches
(483 mm)
PA2
10.63 inches
(270 mm)
6.34 inches
(161 mm)
Not
Recommended
20 inches
(508 mm)
21 inches
(533 mm)
PA3
10.63 inches
(270 mm)
6.73 inches
(171 mm)
Not
Recommended
21 inches
(533 mm)
21.9 inches
(556 mm)
PA4
12.13 inches
(308 mm)
6.93 inches
(176 mm)
Not
Recommended
22 inches
(559 mm)
23 inches
(584 mm)
PA5
10.59 inches
(269 mm)
6.65 inches
(169 mm)
Not
Recommended
21 inches
(533 mm)
22 inches
(559 mm)
PC1
10.51 inches
(267 mm)
5.04 inches
(121 mm)
Not
Recommended
18.5 inches
(470 mm)
19.4 inches
(493 mm)
PC2
10.2 inches
(259 mm)
4.33 inches
(110 mm)
Not
Recommended
17.7 inches
(450 mm)
18.3 inches
(465 mm)
PC3
11.93 inches
(303 mm)
4.49 inches
(114 mm)
Not
Recommended
19 inches
(483 mm)
19.8 inches
(502 mm)
PC4
10.4 inches
(255 mm)
4.49 inches
(114 mm)
Not
Recommended
18.5 inches
(470 mm)
19 inches
(483 mm)
PF1
6.42 inches
(163 mm)
1.97 inches
(50 mm)
10.2 inches
(259 mm)
12 inches
(305 mm)
13 inches
(330 mm)
PF2
6.42 inches
(163 mm)
2.52 inches
(64 mm)
10.2 inches
(259 mm)
12.25 inches
(311 mm)
13.25 inches
(337 mm)
PF3
10.63 inches
(270 mm)
3.11 inches
(79 mm)
13.7 inches
(348 mm)
15.5 inches
(394 mm)
16 inches
(406 mm)
PF4
6.42 inches
(163 mm)
2.52 inches
(64 mm)
12 inches
(305 mm)
13.75 inches
(349 mm)
14.5 inches
(368 mm)
PF5
6.38 inches
(162 mm)
3.27 inches
(83 mm)
12.5 inches
(318 mm)
14.5 inches
(368 mm)
15.5 inches
(394 mm)
PF6
8.11 inches
(206 mm)
3.47 inches
(88 mm)
13.7 inches
(348 mm)
15.5 inches
(393 mm)
16.3 inches
(414 mm)
PF7
12.05 inches
(306 mm)
3.54 inches
(90 mm)
NA
17.1 inches
(434 mm)
18 inches
(457 mm)
PF8
12.99 inches
(330 mm)
3.82 inches
(97 mm)
NA
17.7 inches
(450 mm)
18.4 inches
(467 mm)
PF9
6.1 inches
(155 mm)
3.82 inches
(97 mm)
14.2 inches
(360 mm)
15.7 inches
(399 mm)
16.7 inches
(424 mm)
PF10
6.1 inches
(155 mm)
3.43 inches
(87 mm)
12.75 inches
(324 mm)
14.8 inches
(375 mm)
15.7 inches
(400 mm)
PF11
6.1 inches
(155 mm)
4.25 inches
(108 mm)
14.5 inches
(368 mm)
16.3 inches
(413 mm)
17.3 inches
(439 mm)
Note: The dimensions listed here show the maximum outside dimensions including mounting brackets, end caps, etc. and therefore may not match
dimensions shown on individual data sheets.
Dout
Dout
5
Ð4
+45
304
Ð45
742 263
Ð4
5
+4
5
5
+4
742 033 and 742 034
For antennas with rear facing connectors contact Kathrein Scala Division Sales Engineering to verify
compatibility with sector mount brackets.
782 10347, 782 10348, 782 10349
3-Sector DTMA Mounting Brackets
• Slim and unobtrusive design.
• Nearly cylindrical optical appearance with a small outer diameter.
Specifications
Angle between DTMAs
120°
Suitable for mast diameter
782 10347
3.5 inches (88.9 mm) OD.
782 10348
4.5 inches (114.3 mm) OD.
782 10349
5.5 inches (139.7 mm) OD.
Number of pieces
2 x 3 sector clamp
Materials
3 sector clamp
Stainless steel
Fasteners
Stainless steel
Outer diameter (Dout) of the 3 DTMA Arrangement
782 10347
14.2 inches (360 mm)
782 10348
15.4 inches (390 mm)
782 10349
16.3 inches (415 mm)
Weight (includes both upper and lower clamp)
782 10347
4.2 lbs (1.9 kg)
782 10348
4.4 lbs (2 kg)
782 10349
5.3 lbs (2.4 kg)
Dimensions
782 10347
inches
mm
A
3.5
88.9
B
2.8
70
C
6.7
170
D
7.7
196
Dout
14.2
360
782 10348
inches
mm
A
B
4.5
3.3
114.3 83
C
7.5
190
D
8.6
219
Dout
15.4
390
782 10349
inches
mm
A
B
5.5
3.7
139.7 95
C
8.7
221
D
8.9
225
Dout
16.3
415
Torque: 12.5–14.8 ft-lb
(17–20 Nm)
Dout
Upper Clamp
Bottom view
60°
B
A
C
Lower Clamp
D
Torque: 8.9–11.1 ft-lb
(12–15 Nm)
305
850 10075, 850 10076
NEW
Dual Panel Mounting Kit
The 850 10075 and 850 10076 Dual Panel Mounting Kits consist of
two hot-dip galvanized mounting brackets and necessary fasteners.
It is used to mount two panel antennas with a maximum width of 12.8
inches (325 mm) side by side.
Specifications
Number of mounting brackets
2
Material clamp
Hot-dip galvanized steel
fasteners
Stainless steel
Weight
7.3 lb (3.3 kg)
Hole distance “A”
850 10075
64 mm
850 10076
72 mm
Mounting category
850 10075
L (light) or M (medium)
850 10076
H (Heavy
Recommended torque for M8 bolted connections: 14.8 Lb-Ft (20 Nm)
442
0
5
1 5
ot M
60
t rea e
50
50
64
72
22
5
Configuration
without mechanical downtilt
306
Configuration
with mechanical downtilt
Mounting Kits for Omni & Directional Antennas
Requires 2 each MKPX-2
307
Mounting Kits
Mounting Kit Options for Omni and Directional Antennas
MKPP-23
MKPS-1
MKPS-2
MKPS-3
MKPS-4
MKPS-5
MKPS-13
MKPS-1, MKPS-2, MKPS-3,
MKPS-4, MKPS-5
MKPP-23
MKPX-2
MKPX-9
MKPX-2
MKPS-13
MKPX-9
308
Tilt Mount Kits
Tilt Kit Options for Directional Antennas
MKPX-3, MKPX-4,
MKPX-5, MKPX-6
MKPX-10
MKPX-11, MKPX-12
MKPX-3
MKPX-4
MKPX-5
MKPX-6
MKPX-10
MKPX-11
MKPX-12
MKTB-1
MKTB-3
MKTB-1
MKTB-3
Phantom mast attachment
bracket shown is part of the
associated yagi antenna
309
Mounting Kits
Panel Antenna Azimuth Adjustment Kits
850 10014
850 10015
850 10016
850 10017
• Hot-dip galvanized with stainless steel nuts.
Specifications
850 10014
Mast
2
2.5 inches
(64 mm)
30°
1.2 lbs
(0.55 kg)
Mounting surface
Number of brackets
Distance between bolts (A)
Angular range
Weight
850 10015
Mast
2
2.8 inches
(72 mm)
30°
1.5 lbs
(0.7 kg)
Max. permissable static load per kit
X direction
2150 N
5100 N
Y direction
760 N
1350 N
Supplied mounting hardware
Antenna mounting hardware included
850 10016
Wall
2
2.5 inches
(64 mm)
30°
2.3 lbs
(1.05 kg)
2150 N
5100 N
760 N
1350 N
Antenna mounting hardware included
Wall mounting hardware not included
Recommended torque for all fasteners: 14.75 ft-lb (20 Nm)
A
Pole mounting
Wall mounting
Y
X
310
850 10017
Wall
2
2.8 inches
(72 mm)
30°
2.6 lbs
(1.2 kg)
Technical Information
Advanced X-POL Antenna Standards .................................... 316
Calculating Downtilt ................................................................ 315
Calculating HPBW Touchdown Point ...................................... 317
Comparison of Mechanical and
Electrical Downtilt ............................................................. 318
Directional Antennas In Front of
Reflecting Surfaces .......................................................... 321
Dual Polarized Base Station Antennas For
Polarization Diversity System ........................................... 313
Engineering Reference - Equations ....................................... 324
Formula For Estimating Gain For A Standard
Directional Dipole Array Using The
E & H Plane Patterns ....................................................... 315
Glossary ................................................................................. 328
Isolation Between Dipoles ...................................................... 323
Model Number Cross Reference ............................................ iii
Panel Antenna Test Specifications ......................................... xiv
Radiation Patterns for Side-mounted Omni Antennas ........... 320
Signal Distribution of Power Splitters ..................................... 319
Signal Distribution of Power Taps ........................................... 319
Technical
Information
Wind Survival Rating .............................................................. 317
311
Technical
Information
Technical Information
312
Technical Information
Dual Polarized Base Station Antennas For
Polarization Diversity Systems
Dual Polarized Base Station Antennas For
Polarization Diversity Systems (cont)
It is well known that in a cellular network, mobile phones have
considerably lower transmittal power than the transmitters of the
base stations. This means that the transmission from the mobile
phone to the base station (uplink) is much more unfavorable in
relation to the transmission from the base station to the mobile
phone (downlink). To compensate this, a way of improving the
quality of reception at base stations had to be found.
the installation of antenna systems, an advanced system with a
low-level optical impact had to be found.
Extensive investigations and trials have shown that so-called Polarization diversity Reception is equivalent to or almost equivalent
to Space Diversity Reception. Polarization Diversity Reception
means that the reception levels of two orthogonally polarized
antennas are compared and then the stronger signal is led to the
receiver.
Due to the multi-path signal propagation of radio signals, which
occurs in urban areas, so called Space Diversity Reception has
been introduced which provides the best results in the field.
Space Diversity Reception is based on the following
idea:
The signal transmitted by a mobile phone is reflected in the propagation field and reaches the base station via different paths and
phase angles. As a result, the signal at the base station receiving
antenna is the sum or various vectors with different amplitudes,
phases and polarizations. If two receiving antennas are separated
horizontally from each other, (preferable to vertical separation),
then it is highly likely that one of them will provide the required
signal strength (principle of uncorrelated signals). A logic unit
ensures that the higher signal level of the two receiving antennas
is fed into the receiving systems.
The clear development objective was to design dual-polarized
antennas that have the same outer dimensions as single polarized
antennas and with equivalent gain figures and radiation patterns.
The number of individual antennas can thereby be considerably
reduced, resulting in improved optical appearance, reduced space
requirements and with less mechanical hardware.
2λ
Depending on the characteristics in the propagation area, the use
of a Space Diversity Receiving System will produce a diversity
gain of 3 to 5 dB, as compared to using only one single receiving
antenna.
6–9 λ
Tx
Rx1 + Rx2
Fig. 2: Sector antenna system with Polarization Diversity
Reception - 2 antennas, 3 feeders
6–9 λ
Duplexer
Rx1
Tx
Rx2
Tx1 Rx1
Fig. 1: Sector antenna system using Space Diversity
Reception - 3 antennas, 3 feeders
The space diversity antenna configuration certainly provides
good electrical results, but the number of antennas required is a
negative factor with regard to the resulting optical appearance,
the increased space requirements and the greater amount of mechanical hardware and feeder cables needed.
In view of the difficulties getting construction permits from the
authorities concerned and approval from property owners for
Rx2
Fig. 3: Sector antenna system with Polarization Diversity
Reception using a duplex filter
1 antenna, 3 feeders, 1 duplexer
It can generally be said, that the isolation between neighboring
transmitting antennas, as well as between a transmit and a receive
antenna must amount to at least 30 dB in order to avoid:
●
interfering intermodulation products
●
blocking of the receivers
313
Technical Information
Dual Polarized Base Station Antennas For
Polarization Diversity Systems (cont)
Dual Polarized Base Station Antennas For
Polarization Diversity Systems (cont)
●
the activation of the transmitter’s VSWR monitoring system
by an adjacent transmitter
However the polarization of a 45° polarized antenna is not always
45°, it varies with the azimuth angle.
This requirement for 30 dB isolation also applies to dual-polarized
antennas. Initially dual-polarized antennas with horizontal and
vertical polarization were preferred since this antenna concept
easily provides the required 30 dB isolation figure between the
horizontally polarized system and the vertically polarized system.
This concept is easy to understand if one considers the angles
of orientation when a slanted dipole is viewed from different
perspectives.
Practical results with horizontal / vertical dual-polarized antennas
are fairly positive. However, there is also a weakness.
Since the mobile antennas (i.e. on cars or mobile phones) mainly
operate in a vertically polarized mode, the propagation efficiency
is more favorable to the vertical system of a horizontal/vertical
dual-polarized base station antenna than to the horizontal system.
Thus horizontal polarization is not really suitable for transmitting purposes.
However, with +45°/-45° dual-polarization antennas, both systems are equivalent with respect to their propagation efficiency.
The two systems can therefore be used with good results for
transmit and receive applications. Furthermore, this antenna
concept allows simultaneous transmission from two transmitters
without the use of a transmitter combiner.
A dipole, which is set at a slant of +45° when viewed from the
front, will appear to be vertically polarized when viewed from
the side and will then appear at a slant of -45° when viewed from
the rear.
+45° polarized
vertically polarized
-45° polarized
Dipole
Fig. 5: Varying polarization of a dipole set at a slant of
45°
The vector of the radiated electrical field strength
is fully described by a pair of orthogonal vector
components; in other words, the vector is described
by a rectangular coordinate system.
According to Fig. 6, any field strength vector can be described
either by a coordinate system, defined by the Ev - vector and the
EH - vector, or with the same preciseness by a coordinate system
defined by the E+45° - vector and the E-45° - vector.
Duplexer
Duplexer
Tx1 Rx1a+Rx2a
Tx2
vertical
E+45
Rx1b+Rx2b
Fig. 4: X-polarized antenna for 2 transmitting and
2 receiving channels
1 antenna, 2 feeders, 2 duplexers
E
EV
45°
α
Isolation figures for various antenna arrangements are available
from Kathrein Scala Division.
Radiation patterns and half power beam widths of
X-pol antennas:
Vertically or horizontally polarized antennas show constant polarization regardless of the azimuth angle from which the antenna
is observed.
314
+45°
E-45
horizontal
EH
-45°
45°-polarization: EH = EV = E+45 -3dB, E-45=0
Fig. 6: Separation of a vector E into orthogonal
components
Technical Information
Dual Polarized Base Station Antennas For
Polarization Diversity Systems (cont)
This means that the exactness of the 45° polarization of an
x-polarized antenna can be tested by measuring the radiation
pattern in vertical polarization and in horizontal polarization or,
alternatively by measuring the radiation pattern in +45° polarization and in -45° polarization (Fig. 7 and Fig. 8).
Formula For Estimating Gain For A Standard
Directional Dipole Array Using The E & H
Plane Patterns
*Gain (dBi) @ 10 log (32400/EH)
E = E plane 3 dB beamwidth in degrees
H = H plane 3 dB beamwidth in degrees
If the field strength vector is exactly +45°, the co-polar value is
100% and the cross-polar value is 0%.
Formula does not take into account losses for internal harnessing
and input connector losses.
In other words, if the polarization is almost 45°, the radiation
patterns measured in vertical polarization Ev and in horizontal
polarization EH will also be quite close to each other, or referring
to the second coordinate system, the cross-polar value E -45° of the
field strength will be much smaller than the co-polar one E+45°.
Estimated harness loss 0.2 dB/meter of antenna length
Estimated connector loss 0.1 dB
If the polarization is exactly 45°, the half power beam widths of
the radiation patterns measured in vertical polarization and in
horizontal polarization are all of the same value.
Printed circuit antennas have higher losses causing less efficiency.
*R. S. Elliot, “Beamwidth and Directivity of Large Scanning Arrays”
The Microwave Journal, January 1964
Calculating Downtilt
Formula
angle = tan-1
Fig. 7: Radiation pattern of a Kathrein Scala Division
X-polarized 65° Antenna, measured with vertical
and horizontal polarization.
( (h d-h ) )
1
2
Where: h1= Elevation of the base antenna (ft)
h2= Elevation of the mobile antenna (ft)
d = Distance (ft)
Example
1 mile = 5,280 ft
6.2 miles x 5,280 = 32,736 ft
2400 ÷ 32, 736 = 0.0733138
tan-1(0.0733138) = 4.2 degrees
6.2 miles
11,000 feet
2,400 feet
Fig. 8: Radiation pattern of a Kathrein Scala Division
X-polarized 65° Antenna, measured with +45° and
-45° polarization.
8,600 feet
315
Technical Information
Advanced X-POL Antenna Standards
Advanced X-POL Antenna Standards (cont)
Kathrein Scala Division X-Pol antennas for polarization diversity
represent the latest development stage in antenna technology. An
increasing number of network operators realize the advantage
of installing three dual +/-45 degree polarized antennas for a
complete three sector site, where previously six or nine vertically
polarized antennas had to be installed.
antenna are inserted. There are no drill-holes at all in the profile
which is closed by two sealed end caps. This completely closed
design offers ideal permanent protection against environmental
influences and also increases the mechanical stability of the
antennas.
For polarization diversity to function properly it is very important
that the different polarized signals are as independent as possible
from each other (principle of uncorrelated signals). The most
important point is the “Cross-polar ratio (CPR)”, i.e. the ratio of
the signal levels of similar polarizations compared to dissimilar
polarizations. The CPR should be quoted for the whole sector
width (+/-60 degree), not just for the main radiating direction.
The antenna gain is already considerably reduced at the sector
edges due to the horizontal pattern, therefore a CPR as high as
possible is desired. The system suppliers demand at least 10 dB
for +/-60 degree from the main direction. Kathrein Scala Division
X-Pol antennas more than fulfil these requirements.
CPR
Main
direction
CPR
±30°
sector
CPR
±60°
sector
22 dB
20 dB
15 dB
Kathrein
90° X-Pol Panels
20 dB 1800 MHz
15 dB
12 dB
65°
Typical Cross Polar Ratio (CPR)
Half-power
Beam Width
CPR
Main
direction
CPR
±30°
sector
CPR
±60°
sector
65°
20 dB
16 dB
14 dB
90°
17 dB
13 dB
10 dB
Many of the X-Pol antennas on the market are of patch technology
on printed circuit boards for power-splitting purposes. Kathrein,
for many years, has used the proven dipole-type technology together with low-loss cable harnesses, which clearly offers more
opportunities for perfecting certain antenna characteristics.
We present the new, Kathrein Panels as our concept for the
800/900 MHz X-Pol antenna line. We adapted the excellent and
well proven mechanical design used in our line of 1800/1900
MHz antennas. Instead of a fiberglass cover screwed and sealed
to an aluminum back-plate, the radome now consists of a closed,
self-supporting fiberglass profile into which the metal parts of the
316
Advantages of Kathrein’s dipole X-Pol type antennas compared
to typical patch printed or circuit board solutions:
1. Excellent cross polar ratio over azimuth.
The dipole design delivers remarkable cross polar ratio not
only in the main direction but also across the complete sector.
2. Low intermodulation products.
Unlike printed circuit antennas, the intermodulation products
are typically -150 dBc (2X25 watts).
3. Low internal losses.
The cable harness provides a low loss power distribution,
which enables shorter antenna lengths.
Kathrein X-Pol Panels 800/900 MHz
Typical Cross Polar Ratio (CPR)
Half-power
Beam Width
Apart from the existing comprehensive range of X-Pol antennas
which can be found in our catalogues, we now also have low
gain versions for 800/900 MHz band with a length of 26 inches
(656 mm).
4. High isolation.
Patent pending decoupling elements ensure an isolation
between the two inputs of a min. >30 dB (typically 35 dB).
5. Constant electrical performance under bad weather conditions.
Due to the dipole design, rain, ice and snow have little effect on the electrical parameters such as VSWR, isolation
and cross polar ratio.
Technical Information
Calculating HPBW Touchdown Point
Wind Survival Rating
Formula*
As a safety precaution to our customers, we would like to point
out that certain risks may arise when products are used under
extraordinary operating conditions.
H
Distance = tan
+DTA)
( HPBW
2
Where: H = Height of antenna from the ground (ft)
HPBW = Vertical half-power beamwidth (deg)
DTA =Downtilt angle expressed as a positive
value (deg)
* This formula is for level terrain calculations only.
Example
(70°÷ 2)+0 = 35
tan(35) = .7002
200 ÷ .7002 = 286 feet
Wind Survival Ratings as shown in this catalog represent a mechanical design based on environmental conditions as stipulated
in TIA-222-G-2 (December 2009) and/or ETS 300 019-1-4 which
include the static mechanical load imposed on an antenna by wind
at maximum velocity. The static mechanical load f is found by
the formula as follows:
f=kAV2
Where:
f
A
V
k
is the load
is the projected area of the antenna
is the wind velocity
is a constant unique to each antenna
Once the load f is found the resulting stress is found for each antenna with its mounting system. The stress at which failure occurs
corresponds to a wind speed which is termed “Wind survival”.
Operating conditions such as icing or exceptional dynamic stress
(such as strain caused by oscillating support structures) may exceed the survival rating and result in the breakage of the product
or even cause it to break away from its support and fall to the
ground. Please consider these facts during the site planning and
installation process.
70 degrees
200 feet
Ground
286 feet
317
Technical Information
Comparison of Mechanical and Electrical Downtilt
Mechanical Downtilt
Electrical Downtilt
Colors indicate
mechanical and
electrical downtilt
angles
0°
6°
65°
65°
8°
90°
90°
Mechanical
l
l
l
318
The downtilt angle varies over the horizontal beamwidth. Patterns measured ±90° from the center of the
beam have decreasing tilt angle until there is no tilt
90° from the main beam.
The horizontal half-power beam width increases with
greater downtilt angle.
The resulting gain reduction depends on azimuth
direction.
Electrical
There is uniform downtilt over the whole azimuth
range.
l
The horizontal half-power beamwidth is independent
of the downtilt angle.
l
There is identical gain reduction in all azimuth directions.
l
Technical Information
Signal Distribution of Power Splitters
Signal Distribution of Power Taps
Tx direction:
The RF power fed into port 1 is equally split between ports 2
and 3.
Tx direction:
The main part of the power from port 1 is directly delivered to
port 2, only a small part is coupled out capacitively at port 3;
the power relation port 3/port 2 is 1/10;
insertion loss: port 1 → port 2 : 0.4 dB
port 1 → port 3 : 10.4 dB
Rx direction:
Ports 2 and 3 are not matched to 50 ohms. The result is a miss
match loss, 25% of the signal is reflected at port 2 as well as
port 3.
Port 2 and 3 are not decoupled; therefore 25% of the signal is
delivered from port 2 to port 3 and vice versa.
The remaining 50% of the Rx power from ports 2 and 3 is passed
on to port 1 (attenuation 3 dB).
Conclusion:
Power splitters are reciprocal devices, the power distribution
applies to both directions
Normal insertion losses, input ↔ outputs
2-way splitter : -3 dB
3-way splitter : -4.7 dB
4-way splitter : -6 dB
Rx direction:
Ports 2 and 3 are not matched to 50 ohms and the different impedances create different miss match losses. Furthermore, ports
2 and 3 are not decoupled;
signal flow: port 2 : 0.8% reflected signal
8.2% → port 3
91.0% → port 1 (attenuation 0.4)
port 3 : 83.0% reflected signal
8.0% → port 2
9.0% → port 1 (attenuation 10.4 dB)
Conclusion:
Power taps are reciprocal devices, the selected power distribution
applies to both directions.
antenna
antenna
91%Tx2
antenna
Rx3
Rx2
3
2
25%Rx3
Rx2
50%Tx3
50%Tx2
25%Rx2
25%Rx3
8%Rx3
0.8%Rx2
antenna
2
25%Rx2
9%Tx3
Rx3
3
83%Rx3
8.2%Rx2
1
50%Rx2
Tx
50%Rx3
1
to/from antenna
91%Rx2
Tx
9%Rx3
to/from antenna
319
Technical Information
Radiation Patterns for Side-mounted
Omnidirectional Antennas
Examples of Horizontal radiation patterns for different mast
diameters where A=0.25l, 0.5l, 0.75l.
Examples also apply for antenna HDB-450.
λ
λ
λ
320
Radiation Patterns for Side-mounted
Omnidirectional Antennas (cont)
Technical Information
Directional Antennas In Front of Reflecting
Surfaces
Antennas mounted in front of a reflecting surface, like a building
face or other large conductive surface, will cause the horizontal radiation pattern to change. Part of the radiated energy is
reflected and coupled with the reflecting surfaces. Little to no
change is noticed in a reflective environment to the horizontal
pattern, when the center of the main lobe is perpendicular to the
reflecting wall. Deviation from this angle results in more power
being radiated towards the wall, causing greater reflections and
coupling with more distortion of the horizontal radiation pattern.
Directional Antennas In Front of Reflecting
Surfaces (cont)
0°
S =12 inch
The reflecting surface depicted in the attached diagrams consists
of a concrete block wall. The panel antennas have 18 dBi of gain
and a 65° horizontal half-power beamwidth. The resulting patterns shown in the following diagrams are for various distances
(d) in front of the wall and angles (α) at a frequency of 1850
MHz. Gain variances reflect changes to the horizontal pattern.
Conclusion: When using an antenna with 60–65 degree halfpower beamwidth, the skew angle can be up to ≈30°. Antennas
with 90° should be at a skew angle of no more than ≈15°. In
all instances, the distance from the building should be kept to
a minimum.
0°
S =24 inch
22.5°
0°
S
S
Concrete Block Wall
Concrete Block Wall
0°
22.5°
S =6 inch
S =0.5 inch
0°
S =6 inch
22.5°
S =12 inch
321
Technical Information
Directional Antennas In Front of Reflecting
Surfaces (cont)
22.5°
S =24 inch
45°
S
Concrete Block Wall
45°
S =6 inch
45°
S =12 inch
45°
S =24 inch
322
Technical Information
Isolation Between Dipoles
Isolation between two half-wave dipoles, vertically polarized and positioned vertically in line above each
other on one common mast.
Isolation
between
two
verticallypolarized
polarizedhalf-wave
half-wave dipoles
dipoles mounted
Isolation
between
two
vertically
mountedlaterally.
laterally.
42
58
40
38
36
56
54
50
32
48
30
46
28
44
4
5
6
7 8 9 10
15
Ratio: Distance (d) / wave-length (λ)
20
d
52
34
3
s
Koppeldämpfung
Isolation
dB 60
Isolation
Koppeldämpfung
dB 44
20
30
40
50 60
80 100 120
Ratio: Distance (d) / wave-length (λ)
323
Technical Information
Engineering Reference - Equations
VSWR to RSLdB
Voltage Reflection Coefficient
Z -Z
Γ = Z r + Zo
r
o
RSLdB = 20Log
where: Γ = reflection coefficient
Zr = impedance at reflection
Zo = characteristic impedance (typically 50Ω)
( )
( )
VSWR = r =
RSL
dB
20
2
2
Pt
=1-Γ = 4r 2
Pi
(r + 1)
(( ) )
(( ) )
10
1 - Γ
( )
RSLdB to VSWR
VSWR =
1 + Γ
2
Pr
=Γ = r - 1
Pi
r+1
1
Admittance Y = G±jX = = Y0 1 - Γ
Z
1+Γ
RSL
dB
20
VSWR-1
VSWR+1
Voltage Standing Wave Ratio (VSWR)
1
Impedance Z = R±jX = = Z0 1 + Γ
Y
1-Γ
10
)
(
where:
+1
-1
r = VSWR
Γ = reflection coefficient
Pr = reflected power
Pi = incident power
Pt = transmitted power
Material Parameters at 20°C Table 1.1
Nonmetals
324
ε″ at frequency
ε′,
εr, at frequency
Material
µ r
60
106
1010
Nylon
Plexiglas
Polyethylene
Teflon (22°C)
1
1
1
1
3.60
3.45
2.26
2.10
3.14
2.76
2.26
2.10
2.80
2.50
2.26
2.10
60
106
0.018
0.022
0.064
0.104
(<0.0002)
(<0.005)
1010
0.0110
0.0050
0.005
0.004
(V/inch)
400
990
1200
1500
Metals
/m) Depth of penetration δ for plane waves (m)
Material
µ r
εr
σ(
Silver
Copper
Aluminum
Brass
1
1
1
1
1
1
1
1
6.17 x 107
5.8 x 107
3.72 x 107
1.6 x 107
0.064/√ f
0.066/√ f
0.083/√ f
0.013/√f
Technical Information
Engineering Reference - Equations (cont)
Characteristic Impedance of Free Space
ηo =
Friis Transmission Equation
√
where:
µo
εo = 120πΩ = 377Ω
µo
εo
Pr
=
Pt
= free space permeability
= 4.0π x 10-7(H/m)
= free space permitivity
where: Pr = received power
Pt = transmitted power
R = separation distance
( )
=
( )
2
λ GG
t r
4πR
−9
( )
10 (F/m)
36π
λ
4πR
Characteristic Impedance of Free Space (cont)
1
c = √µoεo = propagation velocity = 2.997925 x 108 m/s
(≅ 3 x 108 m/s)
In free space the wavelength is:
c
λ= f
For a nonmagnetic dielectric:
λ
λd =
= o
f √εr √εr
where: εr is relative dielectric from Table 1.1
= free space loss
Using effective areas
A A
Pr
= et er
Pt
λ2R
Effective Aperature Related to Gain of Antenna
Aem =
c
2
G=
λ2 G
4π
4πAem
λ2
Characteristic Impedance of Coaxial Line
a
( ) √µε
b
Zo = 138 log10 a
r
r
b
where: a =inner diameter
b =outer diameter
µr =relative permeability (usually = 1)
εr =permitivity (dielectric constant)
as given in Table 1.1
Quarter Wave Matching
Z = √ZoZL
where: Z = line impedance
Zo = desired input impedance
ZL = given load impedance
Watts to dBm
dBw = 10 log10(Power Watts)
dBm = (10 log10(Power Watts))+30
dBw to Watts
(dBw
)
10
Watts = 10
Milliwatts = 10
)
( dBw+30
10
dBm to Watts
( dBm-30
)
10
Watts = 10
Milliwatts = 10
)
(dBm
10
325
Technical Information
Engineering Reference - Equations
Gain of Parabolic Antenna
Voltage Gain/Loss to dB
dB(gain/loss) = 20Log10(Gain or Loss)
( )
πD
G = 10 logK
λ
2
where: G = parabolic antenna gain
K = eff L 55%
D = diameter in feet
λ = wavelength in feet
dBm to Volts/µVolts
( )
( )
Volts = Log10-1 dBm-13
20
µVolts = Log10-1 dBm-107
Beamwidth of Parabolic Antenna
20
Ψ=
dBw to Volts/µVolts
( )
( )
70λ
D
where: Ψ = beamwidth
D = diameter in feet
λ = feet
Volts = Log10-1 dBw-17
20
µVolts = Log10-1 dBw-137
20
Noise Factor
F=
Freespace Path Loss
Pno
SNRIN
=
=
GAPni
SNROUT
()
Te
-1
To
L = 96.6 + 20 log(d) + 20 log(f)
where: L = freespace path loss
d = distance in miles
f = frequency in GHz
θ φ
theoretical
G = 32400
.
θ φ
corrected for efficiencies
where: G = directive antenna gain
θ = horizontal beamwidth
φ = vertical beamwidth
Radio Horizon (in miles)
H = √2Tx Rx
where: H = horizon
Tx = transmit height in feet
Rx = receive height in feet
326
NF = 10LogF
Cascade Noise Factor
Directive Antenna Gain
G = 41253
.
Noise Figure
F = F1 +
F2-1
F3-1
+…
+
GA1
GA1GA1
Technical Information
Beam Broadening Versus Sidelobe Ratio
Engineering Reference - Equations (cont)
1.7
1.6
Taylor one-parameter distribution
Beam Broadening
1.5
1.4
1.3
1.2
1.1
1.0
10
20
30
Sidelobe Ratio, dB
40
50
Courtesy of Dr. R. C. Hansen
0
2πL = 10
λ
Normalized Directivity, dB
-2
-4
2πL = 100
λ
-6
Cos θ
-8
-10
0
10
20
30
40
50
60
70
80
90
Scan Angle From Broadside, θ
Reprinted from “Microwave Scanning Antennas”, edited by R. C. Hansen, Vol. 1, p. 20, published by Peninsula Publishing, Los Altos, California. Courtesy of R. C. Hansen
327
Technical Information
GLOSSARY
1XRTT – a wireless telephone digital protocol.
3G – Third Generation Wireless – wireless telephone service
encompassing high speed data communications in addition
to voice communications.
AISG – Antenna Standards Interface Group – a global standards
organization whose objective is the establishment of open
control standards among manufacturers of base stations,
switches and base station antennas with remotely adjustable
downtilt.
Effective Radiated Power (ERP) – In a given direction, the relative
gain of a transmitting antenna with respect to the maximum
directivity of half–wave dipole multiplied by the net power
accepted by the antenna from the connected transmitter.
E-plane, principal – For a linearly polarized antenna, the plane
containing the electric field vector and the direction of
maximum radiation.
Far-field Pattern – Any radiation pattern obtained in the far–field
of an antenna.
AMPS – Advanced Mobile Phone System – an analog wireless
telephone protocol; also refers to the 824–894 MHz wireless
phone allocation in the US.
Far-field Region – That region of the field of an antenna where
the angular field distribution is essentially independent of
the distance from a specified point in the antenna region.
Antenna – The part of transmitting or receiving system that is
designed to radiate or to receive electromagnetic waves.
Free–space Loss – The loss between two isotropic radiators in free
space, expressed as a power ratio.
Array Antenna – An antenna comprised of a number of identical
radiating elements in a regular arrangement and excited to
obtain a prescribed radiation pattern.
Front-to-back Ratio – The ratio of the maximum directivity of an
antenna to its directivity in a specified rearward direction.
AWS – A specific band of radio frequencies (spectrum) intended
to be used for next-generation wireless broadband services.
Most of the spectrum will be used for 3G mobile phone
service, using technologies such as WCDMA+HSDPA or
CDMA EV-DO.
Back Lobe – A radiation lobe whose axis makes an angle of
approximately 180 degrees with respect to the beam axis
of an antenna.
Bandwidth (of an antenna) – The range of frequencies within
which the performance of the antenna, with respect to some
characteristic, typically SWR or return loss, conforms to a
specified standard.
Beam (of an antenna) – The major lobe of the radiation pattern of
an antenna.
CDMA – Code Division Multiple Access – a wireless telephone
digital protocol.
Circularly polarized plane wave – A plane wave whose electric
field vector is circularly polarized.
CPR – Cross polar ratio – a measure on a cross polarized antenna’s
ability to maintain polarization coherence over a 120° sector.
Dipole Antenna – Any one of a class of antennas producing a
radiation pattern approximating that of an elementary electric
dipole.
Directional Antenna – An antenna having the property of radiating
or receiving electromagnetic waves more effectively in some
directions than other.
328
Gain – The ratio of the radiation intensity, in a given direction, to
the radiation intensity that would be obtained if the power
accepted by the antenna were radiated isotropically.
Gain Flatness – Maximum deviation from the specified antenna
gain, over the entire specified bandwidth.
Ground Plane – A conducting or reflecting plane functioning to
image a radiating structure.
GSM – Global System for Mobile Communications – a wireless
telephone digital protocol.
HAAT – Height above average terrain.
Half–Power Beamwidth – In a radiation pattern cut containing the
direction of the maximum of a lobe, the angle between the
two directions in which the radiation intensity is one–half
the maximum value
Horizontally Polarized Plane Wave – A plane wave whose electric
field vector is horizontally polarized.
H-plane – For a linearly polarized antenna, the plane containing
the magnetic field vector and the direction of maximum
radiation.
ISM band – Industrial, Scientific, and Medical band; several
bands allocated in the US for unlicensed low power
communications devices, at 900 and 2400 MHz; uses include
wireless LAN’s, Bluetooth applications, wireless internet,
and spread spectrum point–to–point services.
Isolation Between Antennas – A measure of power transfer from
one antenna to another.
Technical Information
GLOSSARY
Isotropic Radiator – A hypothetical, lossless antenna having
equal radiation intensity in all directions.Loading – The
modification of a basic antenna such as a dipole or monopole
caused by the addition of conductors or circuit elements that
change the input impedance or current distribution or both.
Log Periodic Antenna – Any one of a class of antennas having a
structural geometry such that its impedance and radiation
characteristics repeat periodically as the logarithm of
frequency.
Major Lobe – The radiation lobe containing the direction of
maximum radiation.
Minor Lobe – Any radiation lobe except a major lobe.
Monopole – An antenna, constructed above an imaging plane,
which produces a radiation pattern approximating that of
an electric dipole in the half space above the imaging plane.
Near-field Region – That portion of the near–field region of an
antenna between the far–field and the reactive portion of
the near–field region, wherein the angular field distribution
is dependent upon distance from the antenna.
Null Fill – Redirecting a portion of the signal from the Major Lobe
to fill the Nulls present between the Major Lobe and the
Lower Minor Lobes of the vertical radiation pattern. Used
to improve the coverage of area close in to the transmit site.
(Null Fill is typically represented as a percentage.)
Omnidirectional Antenna – An antenna having an essentially
non–directional pattern in a given plane of the antenna and
a directional pattern in any orthogonal plane.
PCS – Personal Communication Services – Digital wireless services
that include voice and data employing either the TDMA,
CDMA or GSM protocols; also refers to the 1850–1990
MHz wireless phone allocation in the US.
Polarization – In a given direction from the antenna, the polarization
of the wave transmitted by the antenna.
Relative Gain - The ratio of the gain of an antenna in a given
direction to the gain of a reference antenna.
RET – Remote Electrical Tilt – antenna systems having the ability
to adjust the tilt of the main beam from the horizontal to some
angle below the horizon by remote means.
Side Lobe Level – The maximum relative directivity of a side
lobe with respect to the maximum directivity of an antenna,
usually expressed in decibels.
Side Lobe Suppression – Any process, action, or adjustment to
reduce the level of the side lobes or to reduce the degradation
of the intended antenna system performance resulting from
the presence of side lobes.
TDMA – Time Division Multiple Access – a wireless telephone
digital protocol.
TMA – Tower Mount Amplifier – a receive–only preamplifier used
to overcome cable losses in high frequency communications
systems.
USLS – Upper sidelobe suppression – techniques employed to
reduce the first major upper sidelobe of an antenna to prevent
interference at distant cell sites employing common channels.
UMTS – Universal Mobile Telephone Service – the ability for 3G
services to be provided on a worldwide basis using a common
protocol and overlapping radio spectrum.
VSWR – Voltage Standing Wave Ratio.
Vertically polarized plane wave – A plane wave whose electric field
vector is vertically polarized.
V-pol – Vertically polarized antennas.
WiFi – Short for “Wireless Fidelity”, is a set of product compatibility
standards for wireless local area networks (WLAN) based on
the IEEE 802.11 specifications.
Radiation Pattern – The spatial distribution of a quantity that
characterizes the electromagnetic field generated by an
antenna.
WiMAX – An acronym that stands for Worldwide Interoperability
for Microwave Access, is a certification mark for products
that pass conformity and interoperability tests for the IEEE
802.16 standards.
Radome – A cover, usually intended for protecting an antenna from
the effects of its physical environment without degrading its
electrical performance.
WLAN – Wireless Local Area Network – Ethernet or other
computer networking protocol deployed using RF instead
of cable connections from node to node.
Reactive Field – Electric and magnetic fields surrounding an
antenna and resulting in the storage of electromagnetic
energy rather than in the radiation of electromagnetic energy.
X-pol – Cross–polarized antennas; having independent radiating
elements at ± 45°; used in diversity systems.
Reflector Antenna – An antenna consisting of one or more reflecting
surfaces and a radiating (receiving) feed system.
Yagi-Uda Antenna – A linear end-fire array consisting of a driven
element, a reflector element, and one or more director
elements.
329
Notes
330
Limited Warranty
Kathrein Inc., Scala Division, hereafter referred to as the Seller warrants that its products
are transferred rightfully and with good title, that its products are free from any lawful
security interest or other lien or encumbrance unknown to Buyer. Seller warrants its
products to be free of defects in workmanship and materials that arise under proper and
normal use and service for a period of five years from date of original shipment. Broadcast
products and accessories manufactured by Kathrein-Werke KG and sold by Seller are
covered by the above limited warranty but for a period of two years. Test and measurement
equipment products and accessories manufactured by Schomandl-Vertriebs-GmbH and
sold by Seller are covered by the above limited warranty but for a period of two years
only. Products manufactured by others are covered only by the warranties, if any, issued
by their respective manufacturers and Seller assumes no liability or responsibility of any
kind for these goods. Damage caused by wind, ice, fire, lightning, improper installation
or use, unauthorized disassembly or modifications or repairs, improper handling or any
other causes beyond the control of Seller are not covered by this limited warranty. In
the event that Seller determines that defects have occurred, Buyer’s exclusive remedy
hereunder is limited to Seller’s repair or replacement (either at its plant or at such other
place as may be agreed upon between Seller and Buyer) of such defects at no cost to Buyer.
Transportation costs to Seller’s plant or designated facility in connection with the return
of products alleged to be defective shall be paid by Buyer. Products supplied as warranty
replacements and products repaired under warranty are covered for the balance of the
original warranty period or for a period of 90 days after shipment from Seller, whichever
is longer. SELLER MAKES NO WARRANTY EXPRESS OR IMPLIED OTHER THAN
AS STATED ABOVE. EXPRESSLY EXCLUDED ARE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR PURPOSE. THE FOREGOING SHALL
CONSTITUTE ALL OF SELLER’S LIABILITY UNDER THIS WARRANTY WITH
RESPECT TO THE PRODUCTS. IN NO EVENT SHALL SELLER BE LIABLE FOR
SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INSTALLATION
COSTS, LOST REVENUE OR PROFITS, OR ANY OTHER COSTS OF ANY NATURE
AS A RESULT OF THE USE OF PRODUCTS MANUFACTURED BY THE SELLER,
WHETHER USED IN ACCORDANCE WITH THE INSTRUCTIONS OR NOT
UNDER NO CIRCUMSTANCES SHALL SELLER’S LIABILITY TO BUYER UNDER
THIS WARRANTY EXCEED THE ACTUAL SALES PRICE OF THE PRODUCTS
PROVIDED HEREUNDER. No representative is authorized to assume for Seller any other
liability in connection with the products.

Similar documents

American Dexter Cattle Association

American Dexter Cattle Association Bonnerdale Bonnerdale Bonnerdale Bald Knob Bentonville Van Buren West Fork Bono Rogers Oark Bismark Batesville Ash Flat Mountain View Precott Pearcy Winslow El Paso Genoa Genoa Fort Smith Dover Nas...

More information