Liquiflo Product Catalog - Fischer Process Industries

Liquiflo Product Catalog - Fischer Process Industries

Product
G e a r
Catalog
&
C e n t r i f u g a l
P u m p s
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
TM
Challenge Us
W i t h Yo u r
To u g h e s t
Pumping
Applications
P U M P S
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
443 North Avenue
Garwood
New Jersey
07027
USA
INTRODUCTION
Liquiflo has been solving some
of the most difficult chemical pumping
tel. 908.518.0777
applications for over 40 years
fax. 908.518.1847
Liquiflo specializes in designing and manufacturing high-quality gear and centrifugal
pumps for the chemical processing industry. With our extensive experience and wide range
of available products and materials, we can handle some of the most difficult and challenging
chemical pumping applications. These include pumping acids, caustics, solvents, polymers and
other types of chemicals, as well as hot, viscous or extremely thin liquids.
This new full-color 108-page catalog describes the many products Liquiflo has to offer and was
designed with several features intended to simplify the pump selection process.
Our goal is to be the best pump company in the business. We intend to strive towards this goal
by working as a team to provide our customers with quality products and essential information in
a timely manner. Our courteous and professional Customer Service and Engineering personnel
are available to assist you with your chemical pumping applications.
We hope you enjoy using this catalog – both as a means for solving your chemical
pumping requirements and as a useful engineering reference.
G E N E R A L S P E C I F I C AT I O N S f o r L I Q U I F L O G E A R & C E N T R I F U G A L P U M P S
Gear Pumps
3-Series
H-Series
2-Series
Centrifugals
4-Series
Centry® Series
• 11 sizes
• 8 sizes
• 2 sizes
• 4 sizes
• 5 sizes
• Sealed
• Sealed
• Mag-Drive
• Mag-Drive
• Sealed
• Mag-Drive
• Mag-Drive
• Mag-Drive
Flow Rates (max)
• 58 GPM
• 30 GPM
• 60 GPH
• 3.5 GPM
• 160 GPM
• 100 PSI
• 320 ft (head)
• 316 SS
• Alloy-C
• Titanium
• 316 SS
• Alloy-C
Differential Pressures (max)
• 100 PSI
• 225 PSI
• 225 PSI
Housing Materials
• 316 SS
• Alloy-C
• Alloy-20
2
• 316 SS
• Alloy-C
• 316 SS
• Titanium
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TA B L E O F C O N T E N T S
GEAR PUMPS
R O T O G E A R ® General Information
4-7
3-Series
General Information
Model Coding
Specification Sheets
8-9
10-11
12-22
General Information
Model Coding
Specification Sheets
24-25
26-27
28-35
General Information
Model Coding
Specification Sheet
36
37
38
General Information
Model Coding
Specification Sheet
39
40
41
General Information
42-43
H-Series
2-Series)
4-Series
CENTRIFUGAL PUMPS
CENTRY® Series
S P E C I A LT Y P U M P S
ENGINEERING
DISTRIBUTION
tel. 908.518.0777
fax. 908.518.1847
44-45
47-106
107
w w w. l i q u i f l o . c o m
3
ROTOGEAR®
G E N E R A L I N F O R M AT I O N
TM
3-SERIES & H-SERIES GEAR PUMPS
Liquiflo's Rotogear 3-series and H-series gear pumps handle flows
from 0.1 to 58 GPM and up to 225 PSI* of pressure. They were specifically
designed to meet the needs of the chemical processing industry and
will handle a wide range of difficult pumping applications.
* For higher pressure applications, please contact factory.
Mechanical
Seal
Bearings
Wear
Plates
Gears
Stuffing
Box
Housings
All pump components shown are available
in a wide selection of materials to handle
difficult chemical pumping applications.
Bearings
Optional Silicon Carbide
Bearings and hardened Shafts
provide extended service life.
Wear
Plates
Allow pump to be rebuilt
to like-new condition.
Gears
Material selection includes
metal/non-metal selflubricating combinations
for thin fluids.
Housings
Available in several materials
for a wide range of corrosion
resistance.
Stuffing
Box
Universal Stuffing Box will
accept packing, singlemechanical seal, doublemechanical seal and
external mechanical seal
arrangements.
Mechanical Type 9 Seal: available in a
Seal
wide selection of materials
for pumping virtually any
chemicals.
WHY USE GEAR PUMPS?
Gear Pumps are positive displacement
pumps that are frequently used for
metering and transferring viscous as
well as thin fluids at higher differential
pressures.
Liquiflo has extended the useful range
of gear pumps into low-viscosity fluids
by using a wide variety of non-metallic
self-lubricating components.
Gear pumps are an economical
alternative to Diaphragm pumps for
metering applications and do not pulse
or require an air source to operate.
They generally last longer in continuous
duty applications than Diaphragm,
Progressive Cavity or Peristaltic pumps
that require frequent part replacements.
However, the real value of a gear pump
derives from the flexibility and availability
of materials of construction and the
sealing arrangements which facilitate
optimizing the pump for the given
service.
Advantages and attributes over other
types of pumps are:
◆ Low flow and high discharge
pressure
◆ Virtually no pulsations
◆ Self-priming
◆ Lower NPSHR
◆ Fewer wearing parts
◆ Less auxiliary equipment required
(pulsation dampeners, compressors,
dryers, etc.)
◆ Flow accuracies as low as 0.5%
are achievable
◆ Easy to repair
Containment
Can
Inner
Magnet
Containment Available in 316 SS, Alloy-C or
Can
Tefzel-lined Alloy-C.
Eliminates leakage associated
with mechanical seals.
Inner
Magnets
4
Liquiflo’s standard Inner
Magnets are made from
Samarium Cobalt which can
be used at elevated
temperatures.
WHY USE MAG-DRIVE
GEAR PUMPS?
Magnetically Coupled Pumps offer
a simple and cost effective solution to
sealing toxic, noxious, crystallizing or
most other fluids that present problems
for single seals and would therefore
require use of a double mechanical
seal. Magnetically-coupled pumps
eliminate the need for cooling loops
that are required by double mechanical
seals. Two problems commonly
associated with cooling loops are
selecting a compatible barrier fluid
and disposing of the barrier fluid in
the event of an inboard seal failure.
Liquiflo has been producing
magnetically coupled pumps for
more than twenty years with tens of
thousands of successful applications.
Magnetically-coupled versions are
available for all of Liquiflo's product
lines including 2, 3, 4, & H-Series
Gear Pumps, and the Centry®
Series Centrifugal Pumps.
Advantages of Mag-Drive Pumps:
◆ Less expensive than
double-sealed arrangements
◆ Eliminates cooling loops required
on double seal arrangements
◆ Eliminates the need to dispose
of barrier fluids
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
MATERIALS AVAILABLE
Liquiflo’s Rotogear® 3-Series
and H-Series Gear Pumps
come in a wide range of
materials to meet all of your
chemical processing
applications.
HOUSINGS
GEARS
WEAR PLATES
BEARINGS
SHAFTS
316 SS
316 SS
Carbon
Carbon
316 SS
Alloy-C
Alloy-C
Ceramic
Teflon
Alloy-C
Titanium
Glass-filled PTFE
Teflon
Ryton
Titanium
Delrin
Ryton
Silicon Carbide
Ceramic Coated
Ryton
PEEK
PEEK
Tungsten Carbide
Coated
Carbon
Liquiflo Gear Pumps handle a wide range of applications including the pumping of
low-viscosity and high-viscosity fluids, as well as complex metering applications.
High-Viscosity Fluids
Low-Viscosity Fluids
Metering
Water treatment polymers and food
materials up to 80,000 cps are typical
of the high-viscosity service of the
Rotogear® Series of gear pumps. On
high-viscosity applications, it is preferable
and more efficient to use larger pumps
running at slower speeds.
Frequently, gear pumps are the
preferred solution in low-viscosity
pumping applications because of
their hydraulics (low flow, high pressure
and pulseless flow), compactness,
efficiency and low cost. Liquiflo’s wide
selection of materials allow for pump
customization to reduce premature shaft,
gear, and bearing wear on low-viscosity
fluids. Liquiflo has successfully pumped
liquids with viscosities as low as 0.3 CPS.
Liquiflo gear pumps are used in
variable flow systems where the motor
RPM is controlled to regulate pump
output. Flow rate, pH levels or RPM can
trigger the control of feedback signals.
(Refer to the Engineering section for
more details on gear pumps in
metering applications). The Rotogear®
Series is available in a wide variety
of flow ranges (11 sizes offered),
simplifying selection for metering
applications.
REPAIR KITS
Repair Kits simplify inventory and
speed repair. All parts can also be
purchased separately.
Repair kits contain all components
to completely rebuild your Liquiflo
Gear Pump to like-new condition
(all items except the housings
are included).
Repair Kits Include:
• Gears
• Bearings
• Shafts
• Wear Plates
• Keys
• Pins
• O-Rings
• Retaining Rings
• Seals (if applicable)
RELIEF VALVES
Positive displacement
pumps should be installed
with a relief valve in the
discharge line. This will
protect the pump and
piping against any type of
line blockage including
the inadvertent closing of
an isolation valve. Liquiflo
manufactures two sizes
of relief valves in both
316 SS and Alloy-C.
CARTRIDGE
A cartridge is a complete
mag-drive pump less the
outer magnet and pedestal.
A cartridge replacement is a
convenient way to quickly
replace a pump that requires
maintenance.
tel. 908.518.0777
fax. 908.518.1847
w w w. l i q u i f l o . c o m
5
G E N E R A L I N F O R M AT I O N 3 - S E R I E S & H - S E R I E S G E A R P U M P S
OPTIONS
TYPICAL
Liquiflo has several options available for its complete
line of Positive Displacement Gear Pumps, as well as
offering a complete line of standard pumps. Liquiflo
will custom engineer its pumps and options to fit
your specific requirements.
MOUNTING
C O N F I G U R AT I O N S
Close-Coupled Option eliminates manual
alignment of pump and motor.
SANITARY
FITTINGS
Features of Close-Coupled Design:
Sanitary Fittings are
available for food &
drug applications
• Cast-iron bracket that rigidly supports pump & motor
• Eliminates difficulties and inconvenience of manually
aligning pump and motor
• Dimensionally interchangeable with our Mag-Drive pumps
• Available for 56C, 143/145TC, IEC 71, 80, 90 frame motors
• Excellent for OEM applications
• Quickly and easily installed
RAISED-FACE
FLANGES
ANSI, DIN, JIS
Flanges are available
CLOSE-COUPLED SEALED
CLAMP-ON
TEMPERATURE
CONTROL JACKET
Temperature Control
Jackets can maintain the
pump at either elevated
or reduced temperatures.
Commonly used when
pumping liquids that
solidify or become
difficult to pump
when the temperature
decreases.
CLOSE-COUPLED MAG-DRIVE
S-ADAPTER
The S-Adapter is
available for longcoupling mag-drive
pumps; it isolates the
pump from the motor.
LONG-COUPLED MAG-DRIVE (312, 314 & H12 only)
6
TM
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
SEAL
C O N F I G U R AT I O N S
R A N G E O F S E A L S AVA I L A B L E
Liquiflo's Universal Front Housings will accommodate packing,
as well as single and double mechanical seal configurations.
Fig. 1 Packing is suitable and the most economical for safe,
non-hazardous liquids.
Fig. 2 Single Mechanical Seals are used when leakage needs
to be minimized. Single seals have a viscosity limit of 5,000 cps
and a temperature limit of 500 ˚F.
FIG.1 LANTERN RING/PACKING SEAL
Fig. 3 External Mechanical Seals are used to isolate the seal
body from the liquid being pumped or when pumping liquid
under vacuum conditions.
Fig. 4 Double Mechanical Seals require a flushing system
and are typically used when pumping liquids that are abrasive,
crystallize on contact with air, or are very dangerous.
SEAL MATERIALS AVAILABLE
PACKING
SEAL
WEDGES
SEAL
FACES
SEAL
SEATS
Braided Teflon
Grafoil
Teflon
Grafoil
Carbon
Teflon
Silicon Carbide
Ceramic
Silicon Carbide
Tungsten Carbide
FIG.2 SINGLE MECHANICAL SEAL
FIG.5 EXPLODED VIEW OF SINGLE INTERNAL MECHANICAL SEAL
Plug
Mechanical
Seal
Gaskets
FIG.3 EXTERNAL MECHANICAL SEAL
Gland
Plate
Gland Bolts
Front
Housing
Housing
Bolt
Seal Seat
FIG.4 DOUBLE MECHANICAL SEAL
tel. 908.518.0777
fax. 908.518.1847
7
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
3-SERIES
ROTOGEAR® EXTERNAL GEAR PUMPS
3-Series
Up to 100 PSI
differential pressure
H-Series Preview
Liquiflo’s 3-Series gear pumps
are available in Sealed and
Mag-Drive versions with flows
up to 58 GPM and differential
pressures up to 100 PSI.
Liquiflo’s H-Series are higher-pressure gear pumps available
in Sealed and Mag-Drive versions with flows up to approximately
30 GPM and differential pressures up to 225 PSI*. With similar
outside dimensions to the 3-Series, the H-Series has larger diameter
shafts, and bigger bearings and seals for extended service life. These
features allow it to handle higher pressures and operate longer.
(See H-Series Section.)
* 300 PSI possible on some models. Contact factory.
3-Series Specification Chart
SEALED
MAG-DRIVE
Close-Coupled
SEALED
MAG-DRIVE
Max Flow
31F
31F-MC
0.5 GPM (1.9 LPM)
Max Diff. Press.
100 PS I (7 BAR)
Max Discharge
300 PS I (20.7 BAR)
Max Temp.
Max Viscosity
Max Speed
NPSHR @ Max Speed
Weight (LBS)
Sealed
Mag-Drive
33F
33F-MC
35R
35R-MC
1.4 GPM (5.3 LPM) 2.4 GPM (9.1 LPM)
100 PS I (7 BAR)
3.4 GPM (13 LPM)
37R
37R-MC
37F
37F-MC
8.6 GPM (32.5 LPM) 10.7 GPM (40.5 LPM)
39R
39R-MC
15 GPM (57 LPM)
100 PS I (7 BAR)
100 PS I (7 BAR)
100 PS I (7 BAR)
100 PS I (7 BAR)
300 PS I (20.7 BAR) 300 PS I (20.7 BAR)
300 PS I (20.7 BAR)
225 PS I (15.5 BAR)
225 PS I (15.5 BAR)
225 PS I (15.5 BAR)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
500 ˚F (260˚C)
500 ˚F (260˚C)
500 ˚F (260˚C)
100,000 * CPS
100,000 * CPS
100,000 * CPS
100,000 * CPS
100,000 * CPS
100,000 * CPS
100,000 * CPS
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
3 FT (0.9 M)
2 FT (0.6 M)
2 FT (0.6 M)
2 FT (0.6 M)
5.2 FT (1.6 M)
5.2 FT (1.6M)
4 FT (1.2M)
3.5 LBS (1.6 KGS)
32 LBS (15 KGS)
6.5 LBS (2.9 KGS)
36 LBS (16 KGS)
6.5 LBS (2.9 KGS)
36 LBS (16 KGS)
8 LBS (3.6 KGS)
38 LBS (17 KGS)
2.5 LBS (1.1 KGS)
31 LBS (14 KGS)
100 PS I (7 BAR)
35F
35F-MC
2.5 LBS (1.1 KGS) 3.5 LBS (1.6 KGS)
31 LBS (14 KGS) 32 LBS (15 KGS)
* Higher viscosities possible. Contact factory.
8
tel. 908.518.0777
fax. 908.518.1847
w w w. l i q u i f l o . c o m
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
COMPOSITE
GEAR PUMP
PERFORMANCE
CURVES
TEST FLUID: WATER
(1 CPS)
60
(227)
314F • 115
0 RPM
CAPACITY • GPM (LPM)
50
(189)
30
(114)
312F • 1150 RPM
39F & 311F • 17
50 RPM
20
(76)
37F • 1750 RPM
10
(38)
37R • 1750
5
(19)
RPM
35F • 1750 RPM
33F • 1750 RPM
31F • 1750 RPM
LONG-COUPLED ONLY
39F
39F-MC
312R
312R-MC
312F
312F-MC
314F
314F-MC
21.5 GPM (81.4 LPM)
22 GPM (83 LPM)
29 GPM (110 LPM)
58 GPM (220 LPM)
100 PS I (7 BAR)
100 PS I (7 BAR)
100 PS I (7 BAR)
100 PS I (7 BAR)
225 PS I (15.5 BAR)
270 PS I (18.6 BAR)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
100,000 * CPS
100,000 * CPS
100,000 * CPS
100,000 * CPS
1750 RPM
1150 RPM
1150 RPM
1150 RPM
3 FT (0.9 M)
5 FT (1.5 M)
5 FT (1.5 M)
3 FT (0.9 M)
20
(1.4)
40
(2.8)
60
(4.1)
80
(5.5)
100
(6.9)
DIFFERENTIAL PRESSURE • PSI (BAR)
9.8 LBS (4.4 KGS)
40 LBS (18 KGS)
270 PS I (18.6
BAR)
52 LBS (23.6 KGS) 52 LBS (23.6 KGS)
70 LBS (31.8 KGS) 70 LBS (31.8 KGS)
270 PS I (18.6
BAR)
67 LBS (30.4 KGS)
85 LBS (38.6 KGS)
N o t e : 311F Model available. Contact factory.
9
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
3 - S E R I E S
ROTOGEAR®
E X T E R NA L
GEAR PUMP
PUMP MODEL CODING
Bearings
7
Wear Plates
6
9
Bearing Flush
Option
(not shown)
12
Retaining Rings
for Gears
(not shown)
13
Anti-rotation
Pins for Bearings
(not shown)
O-Rings
11
Optional
Shaft
Coating
10
Idler
Shaft
Drive
Shaft
8
Seal Type
1
2
3
Size/Model,
Housings
& Port Type
5
Idler
Gear
4
Drive
Gear
Sealed Pump
Containment
Can
Magnetic
Coupling
15
8
Bore Size for
Outer Magnet
(not shown)
14
Other model
code positions
are the same as
shown above for
the sealed pump.
Mag-Drive Pump
10
tel. 908.518.0777
fax. 908.518.1847
w w w. l i q u i f l o . c o m
Liquiflo 3-Series Gear Pumps
Selection & Availability
PUMP MODEL CODING
EXAMPLE:
Sample Model No.
35FS6P22U00000, designates a Model
35F Pump with Single Mechanical Seal.
Position
35F S 6 P 2 2 U 0 0 0 0 0
1&2
3
4
5
6
Pos. Description
1&2
3
4
5
6
7
8
9
10
11
12
13
14
15
7
8
9
Alloy-C
Carbon
Teflon
Delrin
316 SS
Ryton
PEEK
2
3
4
P
E
=
=
=
=
=
Carbon
Teflon
Ceramic
PEEK
Carbon 60
2
3
B
P
E
=
=
=
=
=
8
0
1
2
3
4
5
8
S
U
W
X
F
H
J
L
R
Outer Magnet
Bore (Mag Drive
ONLY )
Position
O-Rings
4
5
6
7
9
Position
Retaining Rings
Position
Bearing Pins
Position
37
39R
39F
312
314
3/
4
1
11/4
11/4
–
ANSI 150# RF
1/
2
1/
2
3/
4
1
11/4
11/2
21/2
DIN PN16
10
15
20
25
32
40
65
JIS 10K
10
15
20
25
32
40
65
Magnetic
Coupling
(Mag-Drive)
Position
(Options)
33
35
37
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
Carbon
Teflon
Silicon Carbide
PEEK
Carbon 60
=
=
=
=
=
=
0.625”
0.875”
14 mm
19 mm
24 mm
1.125”
=
=
=
=
=
=
=
=
=
Single-Int
Single-Int
Single-Ext
Single-Ext
Double
Double
U-Cup
Packing
Packing
NPT
NPT
Flanged
Flanged
BSPT
BSPT
❍
Teflon - Ceramic
Carbon - Ceramic
Carbon - Ceramic
Teflon - Ceramic
Carbon - Ceramic
Teflon - Ceramic
Viton
Teflon
Grafoil
=
=
=
=
=
=
Teflon
316 SS / PFA encap.
Buna-N
EPDM
Viton
Kalrez
= Material same as housing
= Teflon
= Alloy-C
6 = 316 SS
14 SA ==
B
C
K
J
=
=
=
=
33 in-lbs
66 in-lbs
120 in-lbs
240 in-lbs
250 in-lbs
500 in-lbs
15 89
= Temperature Trim
= Viscosity Trim
S = Single Wall Can
D = Dual-Kan
(56C)
(143/145TC)
(IEC 71 - B5)
(IEC 80 - B5)
(IEC 90 - B5)
(182/184TC)
39 312 314
❍
= Material same as housing (uncoated)
= Ceramic
2 = Tungsten Carbide
12 0
13 01
15
10 01
11 60
14
31
0 = Standard Housings
1 = Ext. Brg Flush
2 = Int. Brg Flush
B
E
V
K
35
13
=
=
=
=
=
=
=
Idler Gear
Position
1/
2
0
12
1
2
3
5
6
8
P
Position
Position
1/
4
0
11
Alloy-C
Teflon
Delrin
316 SS
Ryton
PEEK
Drive Gear
Shaft Coating
31/33
0
10
=
=
=
=
=
=
Position
Position
NPT/BSPT
0
9
1
3
5
6
8
P
Basic Material &
Port Type
Bearing Flush
Or slip joint flanges conforming to the dimensions
of the standard.
0
8
316 SS
Alloy-C
316 SS
Alloy-C
316 SS
Alloy-C
Seal Types
(Sealed pumps
ONLY
ANSI, DIN, JIS
U
7
=
=
=
=
=
=
Position
Flanges available:
2
6
S
H
L
C
X
Y
Bearings
Not Available
2
5
3
Position
No longer available in new pumps.
Parts available only for repair
and replacement.
P
4
Position
Wear Plates
❍
6
3
Model
Position
Available
S
F = Full Capacity
R = Reduced Capacity
Selection
2
Pump Model
Position
Pump Model
35F 35F Pump
Housing Mat’l
S 316 SS NPT
Drive Gear Mat’l 6 316 SS
Idler Gear Mat’l P PEEK
Wear Plate Mat’l 2 Carbon
Bearing Mat’l
2 Carbon
Seal Type
U Single, Carbon-Ceramic
Bearing Flush
0 None
Shaft Coating
0 None
O-Rings
0 Teflon
Retaining Ring
0 Same mat’l as housings
Bearing Pins
0 Teflon
Mag Coupling
N/A
Options
N/A
1
1
2
Model
10 11 12 13 14 15
Liquiflo’s Model Code describes
both the pump’s size and material
selected. This model code is required
for the future identification of your
pump when reordering either a pump
or replacement parts. Model code is
permanently stamped into pump
housing.
35 F
Position No.
TM
❍
❍
Note: 311F pumps available with same features as 39F
tel. 908.518.0777
fax. 908.518.1847
11
TM
31F SEALED
31F-MC MAG-DRIVE
3 - S E R I E S
ROTOGEAR®
GEAR PUMP
Close Coupled:
Sealed or Mag-Drive
Sealed
PERFORMANCE CURVES
PORT SIZE
1/4” NPT/BSPT or 1/2” FLG
MAX FLOW
0.5 GPM; 1.9 LPM
MAX DIFFERENTIAL PRESSURE
100 PSI; 7 BAR
MAX DISCHARGE PRESSURE
300 PSI; 20.7 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
3 FT; 0.9 M
LIFT (DRY)
0.5 FT; 0.15 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
2.5 LBS; 1.1 KGS
31 LBS; 14 KGS
1 CPS Fluid (Water)
LPM
2.2
0.20
0.6
2.0
0.5
1.8
1750
0.15
1.6
1500
0.4
1.0
0.8
1140
0.10
0.3
1750
900
POWER (BHP)
1.2
FLOW (GPM)
1.4
*
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
Long-Coupled: 31F Sealed
0.2
600
0.6
0.4
CP
2.68
0.05
1.34
0.1
L
600
0.2
N
0
0
0
0
40
20
60
80
100
2.69
DIFFERENTIAL PRESSURE (PSI)
BAR
4
2
0
6
0.19
.875
8
0.375
DIA.
SHAFT
1.38
2.75
3.19
100 CPS Fluid (Oil)
LPM
2.2
DIMENSION
0.20
0.6
0.5
1.8
1750
NOTES:
0.8
1750
1140
0.10
0.3
900
POWER (BHP)
1.0
FLOW (GPM)
1.2
7.66
1.03
6.16
LIP
SEAL
6.94
0.81
5.44
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
0.4
1.4
6.94
0.81 (2)
5.44
L
0.15
1500
1.6
SEAL CONFIGURATIONS
PACKING
EXTERNAL
SINGLE MECHANICAL SEAL
MECHANICAL
SEAL
DOUBLE MECHANICAL SEAL
CP (1)
N
2.0
0.63
1.375
PORT
CL
0.27 DIA. THRU
Close-Coupled: 31F-MC & 31F Sealed
Dimensional Data (inches)
2.68
9.31
1.34
0.2
600
0.6
0.4
0.05
0.1
600
7.25
0.2
0
4.50
PORT
CL
0
0
0
20
40
60
100
80
4.00
SHAFT
CL
DIFFERENTIAL PRESSURE (PSI)
BAR
0
12
2
4
6
8
3.50
0.41 DIA.
THRU
tel. 908.518.0777
3.06
5.94
fax. 908.518.1847
2.50
2.50
6.50
TM
33F SEALED
33F-MC MAG-DRIVE
3 - S E R I E S
ROTOGEAR®
GEAR PUMP
Close Coupled:
Sealed or Mag-Drive
Sealed
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
0.4
1.6
6
1750
PORT SIZE
1/4” NPT/BSPT or 1/2” FLG
MAX FLOW
1.4 GPM; 5.3 LPM
MAX DIFFERENTIAL PRESSURE
100 PSI; 7 BAR
MAX DISCHARGE PRESSURE
300 PSI; 20.7 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
2 FT; 0.6 M
LIFT (DRY)
1.5 FT; 0.45 M
1.4
5
1500
1.2
0.3
WEIGHT (without motor)
SEALED
MAG-DRIVE
FLOW (GPM)
1.0
3
1140
1750
0.8
0.2
900
0.6
2
POWER (BHP)
4
*
2.5 LBS; 1.1 KGS
31 LBS; 14 KGS
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
Long-Coupled: 33F Sealed
600
0.4
0.1
1
1.34
600
0.2
CP
2.68
L
N
0
0
0
0
20
40
60
100
80
2.69
DIFFERENTIAL PRESSURE (PSI)
BAR
4
2
0
6
0.19
.875
8
0.375
DIA.
SHAFT
1.38
2.75
3.19
100 CPS Fluid (Oil)
LPM
0.4
1.6
6
DIMENSION
1750
5
1500
NOTES:
0.8
0.2
900
0.6
6.94
0.81
5.44
Dimensional Data (inches)
Close-Coupled: 33F-MC & 33F Sealed
2.68
9.31
1.34
600
2
0.4
0.1
1
600
0.2
0
POWER (BHP)
FLOW (GPM)
3
1750
7.66
1.03
6.16
LIP
SEAL
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
1140
1.0
6.95
0.81 (2)
5.44
L
0.3
1.2
4
SEAL CONFIGURATIONS
PACKING
EXTERNAL
SINGLE MECHANICAL SEAL
MECHANICAL
SEAL
DOUBLE MECHANICAL SEAL
CP (1)
N
1.4
0.63
1.375
PORT
CL
0.27 DIA. THRU
7.25
0
4.50
PORT
CL
0
0
20
40
60
100
80
4.00
SHAFT
CL
DIFFERENTIAL PRESSURE (PSI)
3.50
BAR
0
2
4
6
8
0.41 DIA.
THRU
tel. 908.518.0777
3.06
5.94
fax. 908.518.1847
2.50
2.50
6.50
13
TM
35R SEALED
35R-MC MAG-DRIVE
3 - S E R I E S
ROTOGEAR®
GEAR PUMP
Close Coupled:
Sealed or Mag-Drive
Sealed
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
0.6
3.0
11
10
0.5
2.5 1750
9
8
MAX FLOW
2.4 GPM; 9.1 LPM
MAX DIFFERENTIAL PRESSURE
100 PSI; 7 BAR
MAX DISCHARGE PRESSURE
300 PSI; 20.7 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
2 FT; 0.6 M
LIFT (DRY)
2 FT; 0.6 M
0.4
7
SEALED
MAG-DRIVE
4
1140
0.3
1.5
900
1.0
POWER (BHP)
1750
FLOW (GPM)
5
1/2” NPT/BSPT/FLG
WEIGHT (without motor)
1500
2.0
6
PORT SIZE
*
3.5 LBS; 1.6 KGS
32 LBS; 15 KGS
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
0.2
600
3
Long-Coupled: 35R Sealed
CP
2.44
2
1.22
600
0.5
L
0.1
1
N
0
0
0
20
0
40
60
2.69
100
80
DIFFERENTIAL PRESSURE (PSI)
0.19
0.875
BAR
4
2
0
6
0.375
DIA.
SHAFT
8
1.13
2.25
3.19
100 CPS Fluid (Oil)
LPM
3.0
11
0.6
DIMENSION
0.5
CP (1)
N
10
1750
2.5
9
SEAL CONFIGURATIONS
PACKING
EXTERNAL
SINGLE MECHANICAL SEAL
MECHANICAL
SEAL
DOUBLE MECHANICAL SEAL
7.44
0.80 (2)
5.67
L
8
1500
NOTES:
1750
2.0
0.4
1.00
1.375
PORT
CL
0.27 DIA. THRU
LIP
SEAL
8.56
1.42
6.81
7.44
0.80
5.67
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
5
4
1140
1.5
0.3
900
1.0
POWER (BHP)
6
FLOW (GPM)
7
Dimensional Data (inches)
Close-Coupled: 35R-MC & 35R Sealed
2.44
9.81
1.22
0.2
600
3
2
0.5
0.1
600
7.25
4.50
PORT
CL
1
0
0
0
0
20
40
60
100
80
DIFFERENTIAL PRESSURE (PSI)
BAR
0
14
2
4
4.00
SHAFT
CL
6
0.41 DIA.
THRU
3.50
3.31
5.94
8
tel. 908.518.0777
fax. 908.518.1847
2.50
2.50
6.50
TM
35F SEALED
35F-MC MAG-DRIVE
3 - S E R I E S
ROTOGEAR®
GEAR PUMP
Close Coupled:
Sealed or Mag-Drive
Sealed
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
15
4.0
0.8
3.5
0.7
1750
PORT SIZE
1/2” NPT/BSPT/FLG
MAX FLOW
3.4 GPM; 12.9 LPM
MAX DIFFERENTIAL PRESSURE
100 PSI; 7 BAR
MAX DISCHARGE PRESSURE
300 PSI; 20.7 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
2 FT; 0.6 M
LIFT (DRY)
4 FT; 1.2 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
3.5 LBS; 1.6 KGS
32 LBS; 15 KGS
12
0.6
2.5
0.5
1750
1140
POWER (BHP)
6
FLOW (GPM)
9
3.0 1500
0.4
2.0
900
0.3
1.5
*
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
600
Long- C o u p l e d : 35F Sealed
0.2
1.0
CP
2.44
3
600
0.5
0
1.22
L
0.1
N
0
0
20
0
40
60
100
80
2.69
DIFFERENTIAL PRESSURE (PSI)
BAR
4
2
0
6
0.19
0.875
8
0.375
DIA.
SHAFT
1.13
3.19
100 CPS Fluid (Oil)
LPM
0.8
4.0
15
DIMENSION
3.5
1750
0.7
3.0
1500
0.6
0.4
2.0
900
0.3
1.5
LIP
SEAL
8.56
1.42
6.81
7.44
0.80
5.67
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
0.5
POWER (BHP)
FLOW (GPM)
6
NOTES:
1140
7.44
0.80 (2)
5.67
L
1750
2.5
SEAL CONFIGURATIONS
PACKING
EXTERNAL
SINGLE MECHANICAL SEAL
MECHANICAL
SEAL
DOUBLE MECHANICAL SEAL
CP (1)
N
12
9
1.00
1.375
PORT
CL
0.27 DIA. THRU
2.25
Dimensional Data (inches)
Close-Coupled: 35F-MC & 35F Sealed
2.44
9.81
1.22
600
0.2
1.0
3
600
0.1
0.5
0
7.25
4.50
PORT
CL
0
0
0
20
40
60
4.00
SHAFT
CL
100
80
DIFFERENTIAL PRESSURE (PSI)
BAR
0
2
4
6
8
0.41 DIA.
THRU
tel. 908.518.0777
3.50
3.31
5.94
fax. 908.518.1847
2.50
2.50
6.50
15
TM
37R SEALED
37R-MC MAG-DRIVE
3 - S E R I E S
ROTOGEAR®
GEAR PUMP
Close Coupled:
Sealed or Mag-Drive
Sealed
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
1.6
10
36
9
1750
PORT SIZE
3/4” NPT/BSPT/FLG
MAX FLOW
8.6 GPM; 32.5 LPM
MAX DIFFERENTIAL PRESSURE
100 PSI; 7 BAR
MAX DISCHARGE PRESSURE
225 PSI; 15.5 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
5.2 FT; 1.6 M
LIFT (DRY)
6 FT; 1.8 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
6.5 LBS; 3 KGS
36 LBS; 16 KGS
1.4
32
8
1.2
1500
28
7
FLOW (GPM)
6
20
16
12
1750
1140
1.0
0.8
5
900
4
0.6
POWER (BHP)
24
*
Dimensional Data (inches)
600
3
2
4
1
0
0
Long-Coupled: 37R Sealed
CP
3.32
0.4
8
Higher viscosities possible. Contact factory.
1.66
L
600
0.2
N
0
20
0
40
60
100
80
3.94
DIFFERENTIAL PRESSURE (PSI)
BAR
4
2
0
6
1.25
0.19
8
0.500
SHAFT
DIA.
1.31
2.62
3.19
100 CPS Fluid (Oil)
LPM
10
DIMENSION
1.6
36
9
1750
32
1750
8
28
1.2
1140
1.0
NOTES:
5
0.8
900
4
12
3
8
2
0.6
POWER (BHP)
16
FLOW (GPM)
20
6
8.19
0.94 (2)
5.98
L
1500
7
24
SEAL CONFIGURATIONS
PACKING
EXTERNAL
SINGLE MECHANICAL SEAL
MECHANICAL
SEAL
DOUBLE MECHANICAL SEAL
CP (1)
N
1.4
0.875
2.000
PORT
CL
0.28 DIA. THRU
LIP
SEAL
10.32
2.44
8.10
8.19
0.94
5.98
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
Dimensional Data (inches)
Close-Coupled: 37R-MC & 37R Sealed
3.32
1.66
10.72
600
0.4
4
1
0
0
7.25
600
4.75
PORT 4.00
CL
SHAFT
CL
0.2
0
0
20
40
60
80
100
0.41 DIA.
DIFFERENTIAL PRESSURE (PSI)
THRU
3.50
3.75
5.94
BAR
0
16
2
4
6
8
tel. 908.518.0777
fax. 908.518.1847
2.50
2.50
6.50
TM
37F SEALED
37F-MC MAG-DRIVE
3 - S E R I E S
ROTOGEAR®
GEAR PUMP
Close Coupled:
Sealed or Mag-Drive
Sealed
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
1.8
12
45
1750
1.6
40
10
1500
35
1140
1.0
6
900
0.8
4
15
1.2
600
POWER (BHP)
20
FLOW (GPM)
25
3/4” NPT/BSPT/FLG
MAX FLOW
10.7 GPM; 40.5 LPM
MAX DIFFERENTIAL PRESSURE
100 PSI; 7 BAR
MAX DISCHARGE PRESSURE
225 PSI; 15.5 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
5.2 FT; 1.6 M
LIFT (DRY)
7 FT; 2.1 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
6.5 LBS; 3 KGS
36 LBS; 16 KGS
1.4
1750
8
30
PORT SIZE
*
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
Long-Coupled: 37F Sealed
0.6
CP
3.32
1.66
0.4
10
2
L
600
0.2
5
N
0
0
20
0
40
60
100
80
0
3.94
DIFFERENTIAL PRESSURE (PSI)
BAR
4
2
0
6
8
1.25
0.19
0.500
SHAFT
DIA.
1.31
2.62
100 CPS Fluid (Oil)
LPM
45
12
1750
40
1.8
DIMENSION
1.6
CP (1)
N
1750
10
1500
35
NOTES:
30
8.31
0.81 (2)
5.98
LIP
SEAL
10.44
2.31
8.10
8.31
0.81
5.98
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
1.2
8
SEAL CONFIGURATIONS
PACKING
EXTERNAL
SINGLE MECHANICAL SEAL
MECHANICAL
SEAL
DOUBLE MECHANICAL SEAL
L
1.4
0.875
2.000
PORT
CL
0.28 DIA. THRU
3.19
20
15
1.0
6
900
0.8
4
POWER (BHP)
25
FLOW (GPM)
1140
Dimensional Data (inches)
Close-Coupled: 37F-MC & 37F Sealed
3.32
10.98
1.66
0.6
600
10
0.4
600
7.25
2
0.2
5
0
4.75
PORT 4.00
CL
SHAFT
CL
0
0
20
40
60
100
80
0
0.41 DIA.
DIFFERENTIAL PRESSURE (PSI)
THRU
3.50
3.88
5.94
2.50
2.50
6.50
BAR
0
2
4
6
8
tel. 908.518.0777
fax. 908.518.1847
17
TM
39R SEALED
39R-MC MAG-DRIVE
3 - S E R I E S
ROTOGEAR®
GEAR PUMP
Close Coupled:
Sealed or Mag-Drive
Sealed
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
2.5
16
60
1750
14
50
1500
2.0
12
1750
40
1140
30
1.5
8
900
1.0
6
1” NPT/BSPT/FLG
MAX FLOW
15 GPM; 57 LPM
MAX DIFFERENTIAL PRESSURE
100 PSI; 7 BAR
MAX DISCHARGE PRESSURE
225 PSI; 15.5 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
4 FT; 1.2 M
LIFT (DRY)
6 FT; 1.8 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
8 LBS; 3.6 KGS
38 LBS; 17 KGS
*
POWER (BHP)
FLOW (GPM)
10
PORT SIZE
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
CP
3.50
600
20
Long-Coupled: 39R Sealed
1.75
L
4
0.5
10
600
2
N
4.06
0
0
0
20
0
40
60
100
80
0.28
DIFFERENTIAL PRESSURE (PSI)
1.375
0.625
DIA.
SHAFT
BAR
4
2
0
6
1.31
8
2.62
2.125
PORT
CL
0.28 DIA. THRU
3.19
100 CPS Fluid (Oil)
LPM
60
DIMENSION
2.5
16
1750
14
50
SEAL CONFIGURATIONS
PACKING
EXTERNAL
SINGLE MECHANICAL SEAL
MECHANICAL
SEAL
DOUBLE MECHANICAL SEAL
CP (1)
N
1750
1500
2.0
0.75
1.50
9.69
1.68 (2)
7.09
L
LIP
SEAL
9.69
1.44
7.09
9.69
1.68
7.09
12
NOTES:
1140
40
1.5
900
8
1.0
6
POWER (BHP)
30
FLOW (GPM)
10
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
Dimensional Data (inches)
Close-Coupled: 39R-MC & 39R Sealed
600
20
4
600
7.25
0.5
10
4.75
PORT
CL
2
0
3.50
1.75
11.47
0
0
0
20
40
60
100
80
0.41 DIA.
THRU
DIFFERENTIAL PRESSURE (PSI)
3.50
4.12
5.94
BAR
0
18
4.00
SHAFT
CL
2
4
6
8
tel. 908.518.0777
fax. 908.518.1847
2.50
2.50
6.50
TM
39F SEALED
39F-MC MAG-DRIVE
3 - S E R I E S
ROTOGEAR®
GEAR PUMP
PORT SIZE
11/4” NPT/BSPT/FLG
MAX FLOW
21.5 GPM; 81.4 LPM
MAX DIFFERENTIAL PRESSURE
100 PSI; 7 BAR
MAX DISCHARGE PRESSURE
225 PSI; 15.5 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
3 FT; 0.96 M
3.0
LIFT (DRY)
14 FT; 4.2 M
2.5
WEIGHT (without motor)
SEALED
MAG-DRIVE
9.8 LBS; 4.4 KGS
40 LBS; 18 KGS
Close Coupled:
Sealed or Mag-Drive
Sealed
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
3.5
25
90
1750
80
20
1500
70
1750
FLOW (GPM)
15 1140
50
40
2.0
900
1.5
10
POWER (BHP)
60
*
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
Long-Coupled: 39F Sealed
600
30
1.0
20
CP
4.00
2.00
5
600
L
0.5
N
10
0
0
0
20
0
40
60
4.06
100
80
DIFFERENTIAL PRESSURE (PSI)
0.28
1.375
BAR
4
2
0
6
0.625
DIA.
SHAFT
8
1.31
2.62
3.19
0.28 DIA. THRU
2.125
PORT
CL
.63
1.25
2.23
100 CPS Fluid (Oil)
LPM
25
3.5
DIMENSION
3.0
CP (1)
N
90
1750
1750
80
20
1500
70
10.44
1.68
7.47
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
2.0
900
1.5
10
600
Dimensional Data (inches)
Close-Coupled: 39F-MC & 39F Sealed
4.00
12.22
2.00
1.0
600
5
7.25
4.75
PORT
CL
0.5
10
0
10.44
1.06
7.47
LIP
SEAL
1140
15
30
20
NOTES:
POWER (BHP)
40
FLOW (GPM)
50
10.44
1.68 (2)
7.47
L
2.5
60
SEAL CONFIGURATIONS
PACKING
EXTERNAL
SINGLE MECHANICAL SEAL
MECHANICAL
SEAL
DOUBLE MECHANICAL SEAL
4.00
SHAFT
CL
0
0
0
20
40
60
100
80
0.41 DIA.
THRU
DIFFERENTIAL PRESSURE (PSI)
3.50
4.50
2.50
2.50
6.50
5.94
BAR
0
2
4
6
8
tel. 908.518.0777
fax. 908.518.1847
19
TM
312R SEALED
312R-MC MAG-DRIVE
Sealed
3 - S E R I E S
ROTOGEAR®
GEAR PUMP
Mag-Drive
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
PORT SIZE
11/2” FLG or 11/4” NPT/BPST
MAX. FLOW
22 GPM; 83 LPM
MAX DIFFERENTIAL PRESSURE
100 PSI; 7 BAR
MAX DISCHARGE PRESSURE
270 PSI; 18.6 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
4.0
25
90
1140
80
NPSHR @ 1150 RPM
5 FT; 1.5 M
3.5
LIFT (DRY)
15 FT; 4.5 M
3.0
WEIGHT (without motor)
SEALED
MAG-DRIVE
52 LBS; 23.6 KGS
70 LBS; 31.8 KGS
20
70
900
1140
2.5
FLOW (GPM)
15
50
40
POWER (BHP)
60
2.0
600
10
1.5
*
Dimensional Data (inches)
30
20
1.0
300
5
312R Sealed (Long-coupled only)
CP
10.00
L
300
10
5.00
N
0.5
0
0
Higher viscosities possible. Contact factory.
0
20
0
40
60
100
80
1.00
DIA.
SHAFT
DIFFERENTIAL PRESSURE (PSI)
BAR
4
2
0
6
8
7.50
3.81
PORT
CL
5.00
SHAFT
CL
0.50
0.75
3.63
100 CPS Fluid (Oil)
LPM
DIMENSION
1140
3.5
80
CP (1)
N
20
70
3.0
1140
900
40
2.5
15
2.0
600
10
1.5
POWER (BHP)
50
FLOW (GPM)
60
300
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
Dimensional Data (inches)
312R-MC Mag-Drive (Long-coupled only)
10.00
17.06
5.00
13.11
1.0
5
0.875
DIA.
SHAFT
0.5
300
10
0
0
0
0
20
40
60
7.50
3.81
PORT
CL
5.00
SHAFT
CL
100
80
2.38
BAR
0
2
4
6
0.50
0.75
1.50
DIFFERENTIAL PRESSURE (PSI)
20
15.19
3.69
11.25
1.62
30
20
15.19
3.75 (2)
11.25
L
NOTES:
THRU
SEAL CONFIGURATIONS
SINGLE MECHANICAL SEAL
PACKING
DOUBLE MECHANICAL SEAL
4.0
25
90
3.63
0.34 DIA.
1.50
2.38
3.63
0.34 DIA.
THRU
8
tel. 908.518.0777
fax. 908.518.1847
3.63
TM
312F SEALED
312F-MC MAG-DRIVE
Sealed
3 - S E R I E S
ROTOGEAR®
GEAR PUMP
Mag-Drive
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
PORT SIZE
11/2” FLG or 11/4” NPT/BPST
MAX FLOW
29 GPM; 110 LPM
MAX DIFFERENTIAL PRESSURE
100 PSI; 7 BAR
MAX DISCHARGE PRESSURE
270 PSI; 18.6 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1150 RPM
5 FT; 1.5 M
LIFT (DRY)
17 FT; 5.2 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
52 LBS; 23.6 KGS
70 LBS; 31.8 KGS
5.0
35
120
4.5
30
1140
4.0
100
25
3.5
900
1140
40
3.0
20
POWER (BHP)
60
FLOW (GPM)
80
2.5
600
15
2.0
*
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
1.5
10
CP
300
10.00
5.00
L
1.0
300
N
5
20
312F Sealed (Long-coupled only)
0.5
0
0
0
20
0
40
60
100
80
7.50
1.00
DIA.
SHAFT
DIFFERENTIAL PRESSURE (PSI)
BAR
4
2
0
6
8
3.81
PORT
CL
5.00
SHAFT
CL
0.50
0.75
3.63
100 CPS Fluid (Oil)
LPM
35
120
1140
5.0
DIMENSION
4.5
CP (1)
N
30
4.0
25
3.5
900
20
2.5
600
15
2.0
POWER (BHP)
60
15.19
3.75 (2)
11.25
15.19
3.69
11.25
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
3.0
FLOW (GPM)
80
NOTES:
THRU
SEAL CONFIGURATIONS
SINGLE MECHANICAL SEAL
PACKING
DOUBLE MECHANICAL SEAL
L
1140
100
3.63
0.34 DIA.
1.50
2.38
Dimensional Data (inches)
312F-MC Mag-Drive (Long-coupled only)
17.06
10.00
5.00
13.11
1.62
40
1.5
10
300
1.0
20
0
5
300
0.875
DIA.
SHAFT
0.5
0
0
0
20
40
60
7.50
100
80
4
6
3.63
2.38
BAR
2
0.50
0.75
1.50
DIFFERENTIAL PRESSURE (PSI)
0
3.81
PORT
CL
5.00
SHAFT
CL
3.63
0.34 DIA.
THRU
8
tel. 908.518.0777
fax. 908.518.1847
21
TM
314F SEALED
314F-MC MAG-DRIVE
Sealed
3 - S E R I E S
ROTOGEAR®
GEAR PUMP
Mag-Drive
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
9
70
250
PORT SIZE
21/2” FLG
MAX FLOW
58 GPM; 220 LPM
MAX DIFFERENTIAL PRESSURE
100 PSI; 7 BAR
MAX DISCHARGE PRESSURE
270 PSI; 18.6 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1150 RPM
3 FT; 0.9 M
LIFT (DRY)
20 FT; 6.1 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
67 LBS; 30.4 KGS
85 LBS; 38.6 KGS
8
60
1140
7
200
50
FLOW (GPM)
150
1140
6
40
5
600
30
4
100
POWER (BHP)
900
*
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
314F Sealed (Long-coupled only)
3
20
300
50
L
300
10
1
5.06
N
0
0
0
10.125
CP
2
20
0
40
60
100
80
DIFFERENTIAL PRESSURE (PSI)
BAR
4
2
0
6
8
7.50
1.00
DIA.
SHAFT 5.00
SHAFT
CL
3.81
PORT
CL
0.50
1.50
3.63
3.63
0.53 DIA.
3.00
4.25
THRU
100 CPS Fluid (Oil)
LPM
70
9
DIMENSION
8
CP (1)
N
7
L
250
1140
60
1140
200
50
NOTES:
6
40
5
600
4
30
100
POWER (BHP)
150
FLOW (GPM)
900
SEAL CONFIGURATIONS
SINGLE MECHANICAL SEAL
PACKING
DOUBLE MECHANICAL SEAL
19.69
6.25 (2)
14.75
19.69
6.18
14.75
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
Dimensional Data (inches)
314F-MC Mag-Drive (Long-coupled only)
19.05
10.125
14.11
3
5.06
1.63
20
300
2
50
300
10
0.875
DIA.
SHAFT
1
0
0
0
0
20
40
60
7.50
1.50
3.00
4.25
BAR
22
2
4
0.50
100
80
DIFFERENTIAL PRESSURE (PSI)
0
3.81
PORT
CL
5.00
SHAFT
CL
6
0.53 DIA.
THRU
8
tel. 908.518.0777
fax. 908.518.1847
3.63
3.63
TM
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
H-SERIES
ROTOGEAR® EXTERNAL GEAR PUMPS
tel. 908.518.0777
fax. 908.518.1847
w w w. l i q u i f l o . c o m
23
TM
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
H-SERIES
ROTOGEAR® EXTERNAL GEAR PUMPS
H-Series
Up to 225 PSI
differential pressure
Liquiflo’s H-Series high-pressure
gear pumps are available in Sealed
and Mag-Drive versions with flows
up to approximately 30 GPM and
differential pressures up to 225 PSI*.
With similar outside dimensions to the
3-Series, the H-Series has larger shafts,
bearings and seals for extended service
life. These features allow it to handle
higher pressures and operate longer.
* 300 PSI possible on some models.
Contact factory.
H-Series Specification Chart
SEALED
MAG-DRIVE
Close-Coupled
H3F
H3F-MC
H5R
H5R-MC
Max Flow
1.4 GPM (5.3 LPM)
2.4 GPM (9.1 LPM)
3.4 GPM (13 LPM) 5.4
Max Diff. Press.
225 PSI (15.5 BAR)
225 PSI (15.5 BAR)
225 PSI (15.5 BAR) 225 PSI (15.5 BAR) 225 PSI (15.5 BAR) 225 PSI (15.5 BAR)
Max Discharge
300 PSI (20.7 BAR)
300 PSI (20.7 BAR)
300 PSI (20.7 BAR) 225 PSI (15.5 BAR) 225 PSI (15.5 BAR) 225 PSI (15.5 BAR)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
100,000* CPS
100,000* CPS
100,000* CPS
100,000* CPS
100,000* CPS
100,000* CPS
Max Speed
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
NPSHR @ Max Speed
2 FT (0.6M)
2 FT (0.6M)
2 FT (0.6M)
5.2 FT (1.6M)
5.2 FT (1.6M)
5.2 FT (1.6M)
2.5 LBS (1.1 KGS)
31 LBS (14 KGS)
3.5 LBS (1.6 KGS)
32 LBS (15 KGS)
3.5 LBS (1.6 KGS)
32 LBS (15 KGS)
6.5 LBS (2.9 KGS)
36 LBS (16 KGS)
6.5 LBS (2.9 KGS)
36 LBS (16 KGS)
6.5 LBS (2.9 KGS)
36 LBS (16 KGS)
SEALED
MAG-DRIVE
Max Temp.
Max Viscosity
Weight (LBS)
Sealed
Mag-Drive
H5F
H5F-MC
H7N
H7N-MC
GPM (20.4 LPM)
H7R
H7R-MC
8.6
GPM (32.5 LPM)
H7F
H7F-MC
10.7 GPM (40.5 LPM)
* Higher viscosities possible. Contact factory.
24
tel. 908.518.0777
fax. 908.518.1847
w w w. l i q u i f l o . c o m
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
COMPOSITE
GEAR PUMP
PERFORMANCE
CURVES
TEST FLUID: OIL
( 100 CPS)
30
(114)
H12F • 1140 RPM
25
(95)
CAPACITY • GPM (LPM)
H12R • 1140 RPM
20
(76)
15
(57)
H7F • 1750 RPM
10
(38)
H7R • 1750 RPM
H7N • 1750 RPM
5
(19)
H5F • 1750 RPM
H3F • 1750 RPM
LONG-COUPLED ONLY
H12R
H12R-MC
H12F
H12F-MC
22 GPM (83 LPM)
29 GPM (110 LPM)
225 PSI (15.5 BAR)
225 PSI (15.5 BAR)
270 PSI (18.6 BAR)
270 PSI (18.6 BAR)
500 ˚F (260 ˚C)
500 ˚F (260 ˚C)
100,000* CPS
100,000* CPS
1150 RPM
1150 RPM
5 FT (1.5M)
5 FT (1.5M)
52 LBS (23.6 KGS)
70 LBS (32 KGS)
52 LBS (23.6 KGS)
70 LBS (32 KGS)
0
25
(1.7)
75
(5.2)
125
(8.6)
175
(12.1)
225
(15.5)
DIFFERENTIAL PRESSURE • PSI (BAR)
25
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
H - S E R I E S
ROTOGEAR®
E X T E R NA L
GEAR PUMP
PUMP MODEL CODING
Bearings
7
Wear Plates
9
Bearing Flush
Option
(not shown)
12
Retaining Rings
for Gears
(not shown)
13
Anti-rotation
Pins for Bearings
(not shown)
6
O-Rings
11
Optional
Shaft
Coating
10
Idler
Shaft
Drive
Shaft
8
Seal Type
1
2
3
Size/Model,
Housings
& Port Type
5
Idler
Gear
4
Drive
Gear
Sealed Pump
Containment
Can
Magnetic
Coupling
15
8
Bore Size for
Outer Magnet
(not shown)
14
Other model
code positions
are the same as
shown above for
the sealed pump.
Mag-Drive Pump
26
tel. 908.518.0777
fax. 908.518.1847
w w w. l i q u i f l o . c o m
TM
Liquiflo H-Series Gear Pumps
Selection & Availability
PUMP MODEL CODING
EXAMPLE:
H5FS6PEEU00000, designates a Model
H5F Pump with Single Mechanical Seal.
Sample Model No.
H5 F
Position No.
1
2
S
6
P
E
E
U
0
0
0
0
0
3
4
5
6
7
8
9
10
11
12
13
14
15
H5F S 6 P E E U 0 0 0 0 0
1&2
3
4
5
6
7
8
9
10 11 12 13 14 15
Position
Pump Model
H3
H5
H7
H7N
H12
F = Full Capacity
R = Reduced Capacity
■
Model
1
2
■
■
■
■
■
■
Position
3
S
H
L
C
X
Y
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
4
1 = Alloy-C
6 = 316 SS
P = PEEK
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
5
1
6
8
P
=
=
=
=
Alloy-C
316 SS
Ryton
PEEK
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
6
E
3
4
P
=
=
=
=
Carbon 60
Teflon
Ceramic
PEEK
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
7
E = Carbon 60
B = Silicon Carbide
P = PEEK
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
8
0
1
2
3
4
5
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Model
Pos.
1&2
3
4
5
6
7
8
9
10
11
12
13
14
15
Description
Selection
Pump Model
H5F H5F Pump
Housing Mat’l
S 316 SS NPT
Drive Gear Mat’l 6 316 SS
Idler Gear Mat’l
P PEEK
Wear Plate Mat’l E Carbon 60
Bearing Mat’l
E Carbon 60
Seal Type
U Single, Carbon-Ceramic
Bearing Flush
0 None
Shaft Coating
0 None
O-Rings
0 Teflon
Retaining Ring
0 Same mat’l as housings
Bearing Pins
0 Teflon
Mag Coupling
N/A
Options
N/A
Position
Basic Material &
Port Type
Position
Drive Gear
Position
Idler Gear
Position
Liquiflo’s Model Code describes
both the pump’s size and material
selected. This model code is required
for the future identification of your
pump when reordering either a pump
or replacement parts. Model code is
permanently stamped into pump
housing.
Available
❍
No longer available in new pumps.
Parts available only for repair
and replacement.
Not Available
Wear Plates
Position
Bearings
Position
Outer Magnet Bore
(Mag Drive ONLY)
Position
Seal Types
(Sealed pumps ONLY)
Position
Bearing Flush
Position
Shaft Coating
Position
O-Rings
Position
Flanges available:
Retaining Rings
ANSI, DIN, JIS
Or slip joint flanges conforming to the dimensions
of the standard.
H3
H5
H7
H12
NPT/BSPT
1/
4
1/
2
3/
4
11/4
ANSI 150# RF FLG
1/
2
1/
2
3/
4
11/2
DIN PN16
10
15
20
40
JIS 10K
10
15
20
40
Position
Bearing Pins
Position
Magnetic Coupling
(Mag Drive)
Position
(Options)
tel. 908.518.0777
=
=
=
=
=
=
=
=
=
=
=
=
316 SS
Alloy-C
316 SS
Alloy-C
316 SS
Alloy-C
NPT
NPT
Flanged
Flanged
BSPT
BSPT
0.625”
0.875”
14 mm
19 mm
24 mm
1.125”
(56C)
(143/145TC)
(IEC 71 - B5)
(IEC 80 - B5)
(IEC 90 - B5)
(182/184TC)
■
8
U = Single-Int
L = Packing
R = Packing
9
0 = Standard Housings
1 = Ext. Brg Flush
2 = Int. Brg Flush
■
■
■
■
■
■
■
■
■
■
■
■
10
0 = Material same as housing (uncoated)
1 = Ceramic
2 = Tungsten Carbide
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
11
0
6
B
E
V
K
Teflon
316 SS / PFA encap.
Buna-N
EPDM
Viton
Kalrez
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
0 = Material same as housing
■
■
■
■
■
0 = Teflon
1 = Alloy-C
6 = 316 SS
■
■
■
■
■
■
■
■
■
■
■
■
S
B
C
K
J
=
=
=
=
=
33 in-lbs
120 in-lbs
240 in-lbs
250 in-lbs
500 in-lbs
■
■
8
9
S
D
=
=
=
=
Temperature Trim
Viscosity Trim
Single Wall Can
Dual-Kan
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
12
13
14
15
=
=
=
=
=
=
Carbon - Ceramic
Teflon
Grafoil
fax. 908.518.1847
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
27
TM
H3F SEALED
H3F-MC MAG-DRIVE
H - S E R I E S
ROTOGEAR®
GEAR PUMP
Close Coupled:
Sealed or Mag-Drive
Sealed
PERFORMANCE CURVES
1 CPS Fluid (Water)
PORT SIZE
1/4” NPT/BSPT or 1/2” FLG
MAX FLOW
1.4 GPM; 5.3 LPM
MAX DIFFERENTIAL PRESSURE
225 PSI; 15.5 BAR
MAX DISCHARGE PRESSURE
300 PSI; 20.7 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
2 FT; 0.6 M
LIFT (DRY)
1.5 FT; 0.45 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
2.5 LBS; 1.1 KGS
31 LBS; 14 KGS
LPM
0.6
1.6
6
1750
1.4
5
0.5
1500
1.2
0.4
1140
4
3
0.3
0.8
900
1750
0.6
2
POWER (BHP)
FLOW (GPM)
1.0
*
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
CP
2.68
0.4
1.34
0.1
1
0.2
0
Long-Coupled: H3F Sealed
0.2
600
L
600
N
0
0
0
50
25
2.69
125
100
75
DIFFERENTIAL PRESSURE (PSI)
0.19
.875
BAR
0
1
2
3
4
5
6
7
8
0.375
DIA.
SHAFT
9
1.38
2.75
3.19
0.63
1.375
PORT
CL
0.27 DIA. THRU
100 CPS Fluid (Oil)
SEAL CONFIGURATIONS
PACKING
SINGLE MECHANICAL SEAL
DOUBLE MECHANICAL SEAL
LPM
1.6
6
0.6
DIMENSION
0.5
CP (1)
N
1750
1.4
1750
5
1500
L
1.2
NOTES:
0.8
0.3
900
0.6
600
2
POWER (BHP)
FLOW (GPM)
1.0
3
0.4
1140
4
6.94
0.81 (2)
5.44
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
Dimensional Data (inches)
Close-Coupled: H3F-MC & H3F Sealed
2.68
9.31
1.34
0.2
0.4
600
1
7.25
0.1
4.50
PORT
CL
0.2
0
0
0
0
25
50
75 100 125 150 175 200 225
3.50
0.41 DIA.
DIFFERENTIAL PRESSURE (PSI)
THRU
3.06
5.94
BAR
0
28
4.00
SHAFT
CL
2
4
6
8
10
12
14
16
tel. 908.518.0777
fax. 908.518.1847
2.50
2.50
6.50
TM
H5R SEALED
H5R-MC MAG-DRIVE
Sealed
H - S E R I E S
ROTOGEAR®
GEAR PUMP
PORT SIZE
1/2” NPT/BSPT/FLG
MAX FLOW
2.4 GPM; 9.1 LPM
MAX DIFFERENTIAL PRESSURE
225 PSI; 15.5 BAR
MAX DISCHARGE PRESSURE
300 PSI; 20.7 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
0.9
MAX VISCOSITY
100,000* CPS
0.8
NPSHR @ 1750 RPM
2 FT; 0.6 M
LIFT (DRY)
2 FT; 0.6 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
3.5 LBS; 1.6 KGS
32 LBS; 15 KGS
Close Coupled:
Sealed or Mag-Drive
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
3.0
11
10
2.5 1750
9
0.7
8
1500
0.6
2.0
5
1140
0.5
1.5
1750
900
0.4
4
POWER (BHP)
6
FLOW (GPM)
7
*
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
Long-Coupled: H5R Sealed
0.3
1.0
600
3
CP
2.44
0.2
2
1.22
0.5
0.1
600
1
0
L
N
0
0
0
25
50
75
2.69
125
100
DIFFERENTIAL PRESSURE (PSI)
0.19
0.875
BAR
0
1
2
3
4
5
6
7
8
0.375
DIA.
SHAFT
9
1.13
2.25
1.00
1.375
PORT
CL
0.27 DIA. THRU
3.19
100 CPS Fluid (Oil)
SEAL CONFIGURATIONS
PACKING
SINGLE MECHANICAL SEAL
DOUBLE MECHANICAL SEAL
LPM
11
3.0
10
9
0.9
DIMENSION
0.8
CP (1)
N
1750
2.5
L
0.7
1750
1500
8
NOTES:
2.0
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
0.6
1140
0.5
900
0.4
1.5
5
4
1.0
2
Close-Coupled: H5R-MC & H5R Sealed
2.68
9.31
1.34
0.2
600
7.25
0.5
4.50
PORT
CL
0.1
1
0
Dimensional Data (inches)
0.3
600
3
POWER (BHP)
7
6
7.44
0.80 (2)
5.67
0
4.00
SHAFT
CL
0
0
25
50
75 100 125 150 175 200 225
3.50
0.41 DIA.
DIFFERENTIAL PRESSURE (PSI)
THRU
3.06
5.94
2.50
2.50
6.50
BAR
0
2
4
6
8
10
12
14
16
tel. 908.518.0777
fax. 908.518.1847
29
TM
H5F SEALED
H5F-MC MAG-DRIVE
H - S E R I E S
ROTOGEAR®
GEAR PUMP
Close Coupled:
Sealed or Mag-Drive
Sealed
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
1.2
4.0
15
3.5
1750
1.0
PORT SIZE
1/2” NPT/BSPT/FLG
MAX FLOW
3.4 GPM; 13 LPM
MAX DIFFERENTIAL PRESSURE
225 PSI; 15.5 BAR
MAX DISCHARGE PRESSURE
300 PSI; 20.7 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
2 FT; 0.6 M
LIFT (DRY)
4 FT; 1.2 M
12
3.0
WEIGHT (without motor)
1500
SEALED
MAG-DRIVE
0.8
FLOW (GPM)
6
1140
1750
2.0
0.6
900
1.5
POWER (BHP)
2.5
9
*
3.5 LBS; 1.6 KGS
32 LBS; 15 KGS
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
Long-Coupled: H5F Sealed
0.4
CP
2.44
600
1.0
1.22
L
3
0.2
0.5
0
600
N
2.69
0
0
0
25
50
75
125
100
0.19
DIFFERENTIAL PRESSURE (PSI)
0.875
0.375
DIA.
SHAFT
BAR
0
1
2
3
4
5
6
7
8
9
1.13
2.25
3.19
100 CPS Fluid (Oil)
SEAL CONFIGURATIONS
PACKING
SINGLE MECHANICAL SEAL
DOUBLE MECHANICAL SEAL
LPM
4.0
15
3.5
1.2
DIMENSION
1.0
CP (1)
N
1750
1750
3.0
1500
NOTES:
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
6
FLOW (GPM)
2.5
1140
0.6
2.0
900
1.5
POWER (BHP)
0.8
9
7.44
0.80 (2)
5.67
L
12
Dimensional Data (inches)
Close-Coupled: H5F-MC & H5F Sealed
2.68
9.31
1.34
0.4
600
1.0
600
3
7.25
0.2
4.50
PORT
CL
0.5
0
4.00
SHAFT
CL
0
0
0
25
50
75 100 125 150 175 200 225
3.50
0.41 DIA.
DIFFERENTIAL PRESSURE (PSI)
THRU
3.06
5.94
BAR
0
30
1.00
1.375
PORT
CL
0.27 DIA. THRU
2
4
6
8
10
12
14
16
tel. 908.518.0777
fax. 908.518.1847
2.50
2.50
6.50
TM
H7N SEALED
H7N-MC MAG-DRIVE
H - S E R I E S
ROTOGEAR®
GEAR PUMP
PORT SIZE
3/4” NPT/BSPT/FLG
MAX FLOW
5.4 GPM; 20.4 LPM
MAX DIFFERENTIAL PRESSURE
225 PSI; 15.5 BAR
MAX DISCHARGE PRESSURE
225 PSI; 15.5 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
2.0
MAX VISCOSITY
100,000* CPS
1750
1.8
NPSHR @ 1750 RPM
5.2 FT; 1.6 M
1500
1.6
LIFT (DRY)
6 FT; 1.8 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
6.5 LBS; 3 KGS
36 LBS; 16 KGS
Sealed
Close Coupled:
Sealed or Mag-Drive
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
6
22
20
5
18
16
1.4
4
1140
14
8
3
1.0
900
0.8
1750
2
600
POWER (BHP)
10
FLOW (GPM)
12
1.2
*
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
0.6
Long-Coupled: H7N Sealed
CP
3.32
6
1.66
L
0.4
4
1
0.2
600
2
N
0
0
0
0
25
50
75
100
3.94
125
DIFFERENTIAL PRESSURE (PSI)
BAR
0
1
2
3
4
5
6
7
8
9
1.25
0.19
0.625
SHAFT
DIA.
1.31
100 CPS Fluid (Oil)
LPM
3.19
2.0
6
22
1750
20
5
1.8
1500
18
SEAL CONFIGURATIONS
PACKING
SINGLE MECHANICAL SEAL
DOUBLE MECHANICAL SEAL
DIMENSION
CP (1)
N
1750
1.6
8.20
0.94 (2)
5.98
L
16
1.4
4
8
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
1.2
3
1.0
900
0.8
POWER (BHP)
10
FLOW (GPM)
12
NOTES:
1140
14
0.875
2.000
PORT
CL
0.28 DIA. THRU
2.62
Dimensional Data (inches)
Close-Coupled: H7N-MC & H7N Sealed
3.32
1.66
10.72
600
2
0.6
6
4
0.4
600
1
0.2
2
0
7.25
4.50
PORT 4.00
CL
SHAFT
CL
0
0
0
25
75 100 125 150 175 200 225
50
0.41 DIA.
DIFFERENTIAL PRESSURE (PSI)
THRU
3.50
3.75
5.94
2.50
2.50
6.50
BAR
0
2
4
6
8
10
12
14
16
tel. 908.518.0777
fax. 908.518.1847
31
TM
H7R SEALED
H7R-MC MAG-DRIVE
Sealed
H - S E R I E S
ROTOGEAR®
GEAR PUMP
Close Coupled:
Sealed or Mag-Drive
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
3.0
10
36
9
PORT SIZE
3/4” NPT/BSPT/FLG
MAX FLOW
8.6 GPM; 32.5 LPM
MAX DIFFERENTIAL PRESSURE
225 PSI; 15.5 BAR
MAX DISCHARGE PRESSURE
225 PSI; 15.5 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
5.2 FT; 1.6 M
LIFT (DRY)
6 FT; 1.8 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
6.5 LBS; 3 KGS
36 LBS; 16 KGS
1750
32
2.5
8
1500
28
7
2.0
24
FLOW (GPM)
20
16
12
5
1.5
900
4
1750
*
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
1.0
600
3
POWER (BHP)
1140
6
Long-Coupled: H7R Sealed
CP
3.32
1.66
8
2
4
1
0
0
L
0.5
N
600
3.94
0
0
25
50
75
100
125
DIFFERENTIAL PRESSURE (PSI)
BAR
0
1
2
3
4
5
6
7
8
1.25
0.19
0.625
SHAFT
DIA.
9
1.31
3.19
100 CPS Fluid (Oil)
LPM
10
3.0
DIMENSION
2.5
CP (1)
N
SEAL CONFIGURATIONS
PACKING
SINGLE MECHANICAL SEAL
DOUBLE MECHANICAL SEAL
36
9
1750
32
8
1500
28
NOTES:
7
2.0
16
1140
6
Dimensional Data (inches)
1.5
5
900
4
12
3
8
2
4
1
0
0
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
POWER (BHP)
20
FLOW (GPM)
24
8.20
0.94 (2)
5.98
L
1750
0.875
2.000
PORT
CL
0.28 DIA. THRU
2.62
Close-Coupled: H7R-MC & H7R Sealed
3.32
1.66
10.72
1.0
600
7.25
600
0.5
0
0
25
50
4.50
PORT 4.00
CL
SHAFT
CL
75 100 125 150 175 200 225
0.41 DIA.
THRU
DIFFERENTIAL PRESSURE (PSI)
3.50
3.75
5.94
BAR
0
32
2
4
6
8
10
12
14
16
tel. 908.518.0777
fax. 908.518.1847
2.50
2.50
6.50
TM
H7F SEALED
H7F-MC MAG-DRIVE
H - S E R I E S
ROTOGEAR®
GEAR PUMP
PORT SIZE
3/4” NPT/BSPT/FLG
MAX FLOW
10.7 GPM; 40.5 LPM
MAX DIFFERENTIAL PRESSURE
225 PSI; 15.5 BAR
MAX DISCHARGE PRESSURE
225 PSI; 15.5 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
5.2 FT; 1.6 M
3.0
LIFT (DRY)
7 FT; 2.1 M
2.5
WEIGHT (without motor)
SEALED
MAG-DRIVE
6.5 LBS; 3 KGS
36 LBS; 16 KGS
Close Coupled:
Sealed or Mag-Drive
Sealed
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
45
3.5
12
1750
40
10
1500
35
8
30
20
2.0
6
900
4
15
1.5
1750
POWER (BHP)
25
FLOW (GPM)
1140
*
Higher viscosities possible. Contact factory.
Dimensional Data (inches)
Long-Coupled: H7F Sealed
CP
3.32
600
1.0
1.66
L
10
2
0.5
5
600
0
0
N
3.94
0
0
50
25
100
75
125
DIFFERENTIAL PRESSURE (PSI)
BAR
0
1
2
3
4
5
6
7
8
1.25
0.19
0.625
SHAFT
DIA.
9
1.31
3.19
100 CPS Fluid (Oil)
LPM
12
45
3.5
DIMENSION
3.0
CP (1)
N
1750
1750
40
10
NOTES:
2.5
8
30
15
900
1.5
4
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
Dimensional Data (inches)
2.0
6
8.32
0.94 (2)
5.98
POWER (BHP)
20
1140
FLOW (GPM)
25
SEAL CONFIGURATIONS
PACKING
SINGLE MECHANICAL SEAL
DOUBLE MECHANICAL SEAL
L
1500
35
0.875
2.000
PORT
CL
0.28 DIA. THRU
2.62
Close-Coupled: H7F-MC & H7F Sealed
3.32
1.66
10.72
600
1.0
10
7.25
600
2
4.50
PORT 4.00
CL
SHAFT
CL
0.5
5
0
0
0
0
25
75 100 125 150 175 200 225
50
0.41 DIA.
THRU
DIFFERENTIAL PRESSURE (PSI)
3.50
3.75
5.94
2.50
2.50
6.50
BAR
0
2
4
6
8
10
12
14
16
tel. 908.518.0777
fax. 908.518.1847
33
TM
H12R SEALED
H12R-MC MAG-DRIVE
Sealed
H - S E R I E S
ROTOGEAR®
GEAR PUMP
1 CPS Fluid (Water)
8
25
90
1140
80
11/2” FLG or 11/4” NPT/BPST
MAX FLOW
22 GPM; 83 LPM
MAX DIFFERENTIAL PRESSURE
225 PSI; 15.5 BAR
MAX DISCHARGE PRESSURE
270 PSI; 18.6 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
-40˚F; -40˚ C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
5 FT; 1.5 M
LIFT (DRY)
15 FT; 4.5 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
52 LBS; 24 KGS
70 LBS; 32 KGS
Mag-Drive
PERFORMANCE CURVES
LPM
PORT SIZE
7
20
70
6
900
60
FLOW (GPM)
15
50
40
4
600
1140
10
3
POWER (BHP)
5
*
Higher viscosities possible. Contact factory.
H12R Sealed (Long-coupled only)
Dimensional Data (inches)
30
CP
20
10.00
L
2
300
5.00
N
5
1
10
300
0
0
1.125
DIA.
SHAFT
0
0
25
50
75
125
100
DIFFERENTIAL PRESSURE (PSI)
7.50
6.310
PORT
CL
7.50
SHAFT
CL
0.50
BAR
0
1
2
3
4
5
6
7
8
9
0.75
3.63
3.63
0.34 DIA.
1.50
2.38
THRU
100 CPS Fluid (Oil)
LPM
25
8
DIMENSION
7
CP (1)
N
90
1140
80
1140
6
NOTES:
5
Dimensional Data (inches)
FLOW (GPM)
60
15
4
600
10
3
POWER (BHP)
900
40
15.19
2.25 (2)
9.75
L
20
70
50
SEAL CONFIGURATIONS
SINGLE MECHANICAL SEAL
PACKING
DOUBLE MECHANICAL SEAL
15.19
2.18
9.75
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
H12R-MC Mag-Drive (Long-coupled only)
10.00
17.06
5.00
13.11
1.62
30
300
20
2
5
300
1
10
0.875
DIA.
SHAFT
7.50
3.81
PORT
CL
5.00
SHAFT
CL
0.50
0.75
0
0
1.50
0
0
25
50
2.38
75 100 125 150 175 200 225
3.63
0.34 DIA.
THRU
DIFFERENTIAL PRESSURE (PSI)
BAR
34
0
2
4
6
8
10
12
14
16
tel. 908.518.0777
fax. 908.518.1847
3.63
TM
H12F SEALED
H12F-MC MAG-DRIVE
Sealed
H - S E R I E S
ROTOGEAR®
GEAR PUMP
Mag-Drive
PERFORMANCE CURVES
1 CPS Fluid (Water)
LPM
10
35
120
9
30
1140
PORT SIZE
11/2” FLG or 11/4” NPT/BPST
MAX FLOW
29 GPM; 110 LPM
MAX DIFFERENTIAL PRESSURE
225 PSI; 15.5 BAR
MAX DISCHARGE PRESSURE
270 PSI; 18.6 BAR
MAX TEMPERATURE
500˚F; 260˚C
MIN TEMPERATURE
- 40˚F; -40˚ C
MAX VISCOSITY
100,000* CPS
NPSHR @ 1750 RPM
5 FT; 1.5 M
LIFT (DRY)
17 FT; 5.2 M
WEIGHT (without motor)
SEALED
MAG-DRIVE
52 LBS; 24 KGS
70 LBS; 32 KGS
8
100
25
7
60
40
6
20
5
600
15
1140
4
POWER (BHP)
80
FLOW (GPM)
900
*
Higher viscosities possible. Contact factory.
CP
3
10
H12F Sealed (Long-coupled only)
Dimensional Data (inches)
10.00
L
300
5.00
N
2
5
20
1
300
1.125
DIA.
SHAFT
0
0
0
0
50
25
100
75
125
DIFFERENTIAL PRESSURE (PSI)
7.50
6.310
PORT
CL
7.50
SHAFT
CL
0.50
BAR
0
1
2
3
4
5
6
7
8
9
0.75
3.63
3.63
0.34 DIA.
1.50
2.38
THRU
100 CPS Fluid (Oil)
LPM
35
120
100
9
CP (1)
N
8
L
1140
NOTES:
25
7
6
20
5
600
15
4
15.19
2.25 (2)
9.75
15.19
2.18
9.75
(1) Add .312 inches for Bearing Flush Plug.
(2) Minimum dimension.
H12F-MC Mag-Drive (Long-coupled only)
Dimensional Data (inches)
POWER (BHP)
FLOW (GPM)
900
60
DIMENSION
1140
30
80
10
SEAL CONFIGURATIONS
SINGLE MECHANICAL SEAL
PACKING
DOUBLE MECHANICAL SEAL
10.00
17.06
5.00
13.11
1.62
40
3
10
300
2
20
0
5
300
1
0
0.875
DIA.
SHAFT
7.50
3.81
PORT
CL
5.00
SHAFT
CL
0
0
25
50
0.50
0.75
75 100 125 150 175 200 225
1.50
2.38
DIFFERENTIAL PRESSURE (PSI)
3.63
3.63
0.34 DIA.
THRU
BAR
0
2
4
6
8
10
12
14
16
tel. 908.518.0777
fax. 908.518.1847
35
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
2 - S E R I E S
ROTOGEAR®
E X T E R NA L
GEAR PUMP
2-SERIES MAG-DRIVE MINI-PUMP
G E N E R A L I N F O R M AT I O N
DESCRIPTION
The 2-Series Mini-Pump is a low-flow/
high-pressure external gear pump that is
completely field repairable. With a ruggedly
designed 316 Stainless Steel or Titanium body
and several material options for shafts, gears,
wear plates and bearings, these pumps can
be used in a wide variety of services.
2-Series Mini-Pump
TYPICAL USES & APPLICATIONS
The 2-Series Mini-Pump is typically used
in chemical processing plants, pilot plants,
laboratories, paper-making, chemical dosing
and metering, pipeline sampling and wastewater treatment.
MAINTENANCE
The 2-Series Mini-Pump was designed with
reliability and ease of maintenance in mind.
The gear and shaft are permanently fixed to
each other making repairs easy and fool-proof.
Standard repair kits contain all wearing parts
and static O-rings:
• Gear-Shaft Assemblies
• Bearing-Wear Plate Combinations
• O-rings
2-Series Mini-Pump
close-coupled to motor
MATERIALS AVAILABLE
CUSTOMIZATION
GEARS
BEARINGS
SHAFTS
316 SS
316 SS
CARBON
316 SS
TITANIUM
ALLOY-C
PEEK
TITANIUM
HOUSINGS
Contact factory.
FEATURES
• Mag-Drive
• Corrosion resistant materials
• Pulseless flow
• Flow rates from 1 to 60 GPH
• Viscosities to 5,000 CPS
• Differential pressures up to 225 PSI
• Low NIPR (NPSHR)
• Self-compensating wear plates limit
slip on low viscosity fluids
• High torque SmCo Magnets
• Minutes to repair
PEEK
TITANIUM
Note: Tungsten Carbide and Chrome Oxide Coated Shafts are available.
Dimensional Data -inches (mm)
2-SERIES Mag-Drive Mini Pump
6.61"
PORT - PORT
(167.9)
2"
5.36"
(136.1)
REPAIR KITS
(50.8)
1/4" NPT
Repair Kits simplify inventory and speed repair.
All parts can also be purchased separately.
4.81"
LIQUIFLO
(122.2)
3.27"
(83.06)
3.0"
(76.2)
MotorC
L
Port C
L
36
tel. 908.518.0777
fax. 908.518.1847
1.5"
(38.1)
w w w. l i q u i f l o . c o m
TM
PUMP MODEL CODING
2 - S E R I E S
ROTOGEAR®
E X T E R NA L
GEAR PUMP
Liquiflo 2-Series Gear Pumps
Selection & Availability
EXAMPLE:
2FS6PE200T, designates a
Model 2F Mag-Drive Pump.
2F
S 6 P E 2 0 0 T
1&2
3
4
5
6
7
8
9
10
Sample Model No.
2
F
S
6
P
E
2
0
0
T
Position No.
1
2
3
4
5
6
7
8
9
10
Position
Model
Position
Model
Pos. Description
1&2
3
4
5
6
7
8
9
10
1
2
Pump Model
2
F
R
=
=
Full Capacity
Reduced Capacity
■
■
3
S
X
T
Z
=
=
=
=
316 SS NPT
316 SS BSPT
Titanium NPT
Titanium BSPT
■
■
■
■
4
1
6
P
4
=
=
=
=
Alloy-C
316 SS
PEEK
Titanium
■
■
■
■
5
1
6
P
4
=
=
=
=
Alloy-C
316 SS
PEEK
Titanium
■
■
■
■
6
E
P
=
=
Carbon 60
PEEK
■
■
7
0
1
2
=
=
=
0.500” (NEMA 48C)
14 mm (IEC 71 - B14 Face)
0.625” ((NEMA 56C)
■
■
■
8
0
1
=
=
Material same as housing (uncoated)
Ceramic
■
■
9
0
B
K
=
=
=
Teflon
Viton
Kalrez
■
■
■
10
T
=
30 in-lbs
■
Selection
Pump Model
2F 2F Pump
Housing Mat’l
S 316 SS NPT
Drive Gear Mat’l
6 316 SS
Idler Gear Mat’l
P PEEK
Wear Plate & Bearing E Carbon 60
Outer Magnet Bore
2 .625” dia.
Shafts
0 Non-coated
O-Rings
0 Teflon
Magnetic Coupling
T MCT
Position
Basic Material &
Port Type
Position
Drive Gear
Position
Idler Gear
Position
Wear Plates
& Bearings
Combination
Position
Outer Magnet Bore
Liquiflo’s Model Code describes
both the pump’s size and material
selected. This model code is required
for the future identification of your
pump when reordering either a pump
or replacement parts. Model code is
permanently stamped into pump
housing.
Position
Shaft Coating
Position
O-Rings
Position
Available
❍
No longer available in new pumps.
Parts available only for repair
and replacement.
Not Available
Magnetic Coupling
Outer Magnet
Bore
Optional
Shaft
Coating
7
8
Wear Plates
& Bearings Combo
6
Idler Gear
5
Model,
Housing
& Port
Type
1
2
3
Motor
Shaft
4
Drive
Gear
10
Magnetic
Coupling
9
O-Rings
2-Series Mini Pump (Mag-Drive)
37
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
2 - S E R I E S
ROTOGEAR®
E X T E R NA L
GEAR PUMP
2 - S E R I E S Mag-Drive Mini Pump
MODEL
2R (Reduced)
2F (Full)
PORT SIZE
1/4” NPT/BSPT
1/4” NPT/BSPT
MAX FLOW
30 GPH; 113 LPH
60 GPH; 227 LPH
MAX DIFFERENTIAL PRESSURE
225 PSI; 15.5 BAR
225 PSI; 15.5 BAR
MAX DISCHARGE PRESSURE
300 PSI; 20.7 BAR
300 PSI; 20.7 BAR
MAX TEMPERATURE
500˚F; 260˚C
500˚F; 260˚C
MIN TEMPERATURE
- 40˚F; -40˚C
- 40˚F; -40˚C
MAX VISCOSITY (300 RPM)
5,000 CPS
5,000 CPS
NPSHR @ 1750 RPM
2 FT; 0.6 M
2 FT; 0.6 M
LIFT (DRY)
1.2 FT
1.2 FT
WEIGHT (without motor)
5 LBS; 2.3 KGS
5 LBS; 2.3 KGS
2R
PERFORMANCE CURVES
30 CPS Fluid (Oil)
35
35
30
30
39R & 39R MC (100 CPS) OIL
25
20
34
15
28
50
FLOW RATE (GPH)
FLOW RATE (GPH)
1 CPS Fluid (Water)
RP
M
00
RP
M
17
50
10
1
R
1 50
90 200 0 RP PM
0
R
M
RP PM
M
5
37F (1 CPS) Fluid-Water
25
345
0R
288
20
PM
15
175
150 0 RP
120 0 RP M
M
0R
PM
900
RP
M
10
5
0
PM
0R
0
0
25
50
75
100
125
0
25
50
DIFFERENTIAL PRESSURE (PSI)
75
100
125
150
175
200
225
DIFFERENTIAL PRESSURE (PSI)
2F
PERFORMANCE CURVES
30 CPS Fluid (Oil)
70
70
60
60
50
3450
40
2880
FLOW RATE (GPH)
FLOW RATE (GPH)
1 CPS Fluid (Water)
RPM
RPM
30
20
40
1750 RPM
1500 RPM
30
1200 RPM
900 RPM
10
0
0
0
25
50
75
100
DIFFERENTIAL PRESSURE (PSI)
38
2880 RPM
50
20
17
1500 50 RPM
RPM
1
2
0
900
RPM 0 RPM
10
3450 RPM
tel. 908.518.0777
fax. 908.518.1847
125
0
25
50
75
100
125
150
175
200
225
DIFFERENTIAL PRESSURE (PSI)
w w w. l i q u i f l o . c o m
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
4 - S E R I E S
ROTOGEAR®
E X T E R NA L
GEAR PUMP
4-SERIES MAG-DRIVE GEAR PUMP
G E N E R A L I N F O R M AT I O N
COMPOSITE
GEAR PUMP
PERFORMANCE
CURVES
T E S T F L U I D : WAT E R
(1 CPS)
5
(19)
Liquiflo’s 4-Series pumps are low-flow/highpressure magnetically-driven gear pumps that are
completely field repairable. The 4-Series housings
are manufactured from Bar Stock in 316 Stainless
Steel, Alloy-C or Titanium. With several material
options for shafts, gears, wear plates and bearings,
these pumps can be used in a wide variety of
chemical processing applications.
4
(15)
CAPACITY • GPM (LPM)
45-MC •
REPAIR KITS
Repair Kits simplify
inventory and
speed repair.
All parts can also
be purchased
separately.
1750 RP
M
3
(11)
44-MC •
1750 RP
M
2
(7.6)
43-MC
• 1750
RPM
1
(3.8)
41-MC • 1750 RP
M
MATERIALS AVAILABLE
HOUSINGS
GEARS
WEAR PLATES BEARINGS
316 SS
316 SS
CARBON
CARBON
316 SS
ALLOY-C
ALLOY-C
GLASS-FILLED
PTFE
CERAMIC
TEFLON
ALLOY-C
GLASS-FILLED
PTFE
RYTON
CERAMIC
COATED
RYTON
RYTON
TITANIUM
SILICON
CARBIDE
20
(1.4)
40
(2.8)
60
(4.1)
80
(5.5)
100
(6.9)
DIFFERENTIAL PRESSURE • PSI (BAR)
TUNGSTEN
CARBIDE
COATED
PEEK
CARBON
0
SHAFTS
4-Series Specification Chart
MODEL
41-MC
43-MC
44-MC
45-MC
Port Size
1/4” NPT/BSPT
1/4” NPT/BSPT
3/8” NPT/BSPT
3/8” NPT/BSPT
Max Flow @ 1750 RPM
0.5
GPM (1.9 LPM)
PSI (7 BAR)
1.4
GPM (5.3 LPM)
300
Max Temperature
500˚F (260˚C)
500˚F (260˚C)
500˚F (260˚C)
500˚F (260˚C)
Min Temperature
-40˚F (40˚C)
-40˚F (40˚C)
-40˚F (40˚C)
-40˚F (40˚C)
4,500 CPS
3,700 CPS
2,000 CPS
1,000 CPS
4.5 FT (1.4 M)
3 FT (0.9 M)
3 FT (0.9 M)
2 FT (0.6 M)
0.5 FT (0.15 M)
1.5 FT (0.45 M)
2.0 FT (0.6 M)
4 FT (1.2 M)
300
PSI (7 BAR)
GPM (12.9 LPM)
Max Discharge Press.
PSI (21 BAR)
100
3.4
100
300
PSI (7 BAR)
GPM (9.1 LPM)
Max Diff. Press.
PSI (21 BAR)
100
2.4
PSI (21 BAR)
100
300
PSI (7 BAR)
PSI (21 BAR)
Max Viscosity
@ 300 RPM
NPSHR @ 1750 RPM
Lift (Dry)
Weight
tel. 908.518.0777
11
LBS (24 KGS)
fax. 908.518.1847
11
LBS (24 KGS)
13
LBS (29 KGS)
13
LBS (29 KGS)
w w w. l i q u i f l o . c o m
39
TM
PUMP MODEL CODING
4 - S E R I E S
ROTOGEAR®
E X T E R NA L
GEAR PUMP
Liquiflo 4-Series Gear Pumps
Selection & Availability
EXAMPLE:
43MCS6P22N000, designates a Model
43MC Mag-Drive Pump.
Sample Model No.
43 MC S 6 P 2 2 N 0 0 0
1
2
3
4
5
6
7
8
Position
Model
9 10
Position
Pos. Description
1
2
3
4
5
6
7
8
9
10
Basic Material &
Port Type
Selection
Pump Model
43MC 43MC Pump
Housing Mat’l
S 316 SS NPT
Drive Gear Mat’l
6
316 SS
Idler Gear Mat’l
P
PEEK
Wear Plate Mat’l
2
Carbon
Bearing Mat’l
2
Carbon
Inner Magnet
N MCN
Outer Magnet Bore
0
.500 dia. NEMA 48C
Shafts
0
Non-coated
Trim
0
None
Position
Drive Gear
Position
Idler Gear
Position
Wear Plates
Liquiflo’s Model Code describes
both the pump’s size and material
selected. This model code is required
for the future identification of your
pump when reordering either a pump
or replacement parts. Model code is
permanently stamped into pump
housing.
Position
Bearings
Position
Inner Magnet
Available
❍
No longer available in new pumps.
Parts available only for repair
and replacement
43 MC
S
6
P
2
2
N 0
0
0
1
2
3
4
5
6
7
9
10
Position No.
Position
Outer Magnet
Bore Size
Position
Shaft Coating
Not Available
Position
Trim
8
1
2
Pump Model
41 MC
43 MC
44 MC
45 MC
S
H
T
X
Y
Z
=
=
=
=
=
=
316 SS NPT
Alloy-C NPT
Titanium NPT
316 SS BSPT
Alloy-C BSPT
Titanium BSPT
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
3
1
3
4
6
8
P
=
=
=
=
=
=
Alloy-C
Teflon
Titanium
316 SS
Ryton
PEEK
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
4
1
3
4
6
8
P
=
=
=
=
=
=
Alloy-C
Teflon
Titanium
316 SS
Ryton
PEEK
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
5
2
E
3
4
8
P
=
=
=
=
=
=
Carbon
Carbon 60
Teflon
Ceramic
Ryton
PEEK
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
6
2
E
3
8
B
P
=
=
=
=
=
=
Carbon
Carbon 60
Teflon
Ryton
Silicon Carbide
PEEK
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
7
N =
R =
20 inch-lbs
30 inch-lbs
■
■
■
■
■
■
■
■
8
0
1
2
.500” (NEMA 48C)
14 mm (IEC 71 - B14 Face)
.625” (NEMA 56C)
■
■
■
■
■
■
■
■
■
■
■
■
9
0 =
A =
C =
Material Same as Housing (uncoated)
Coated - Ceramic
Coated - Tungsten Carbide
■
■
■
■
■
■
■
■
■
■
■
■
10
0
8
9
None
Temperature Trim
Viscosity Trim
■
■
■
■
■
■
■
■
■
■
■
■
=
=
=
=
=
=
Wear Plates
8
Outer Magnet
Bore Size
(not shown)
9
Optional
Shaft Coating
(not shown)
10
Trim
(not shown)
Inner
Magnet
5
7
Idler
Gear
4
Drive
Gear
3
1
6
Bearings
4-Series Mag-Drive Gear Pump
40
2
Model,
Housing
&
Port Type
TM
4-SERIES M A G - D R I V E G E A R P U M P
4 - S E R I E S
ROTOGEAR®
E X T E R NA L
GEAR PUMP
Dimensional Data (inches)
C
A
B
D PORTS
(NPT/BSPT)
5.60
3.50
3.00
MODEL
A
B
C
D
41-MC
43-MC
44-MC
45-MC
6.24
6.24
6.74
6.74
0.62
0.62
0.75
0.75
1.250
1.250
1.500
1.500
1/4”
1/4”
3/8”
3/8”
PERFORMANCE CURVES : 1 CPS Fluid (Water)
41-MC
43-MC
LPM
LPM
2.2
0.2
0.6
0.4
1.6
6
1750
2.0
1.4
0.5
1.8
5
1750
1500
1.2
0.3
1.6
1500
4
1.0
0.8
1140
0.1
0.3
1750
900
3
FLOW (GPM)
POWER (BHP)
1.0
FLOW (GPM)
1.2
0.6
0.1
0.4
1
0.1
0.2
40
20
60
80
0
0
0
0
0
0
600
0.2
600
0
0.2
900
600
600
0.6
1750
0.8
2
0.2
0.4
1140
POWER (BHP)
0.4
1.4
20
0
100
40
60
100
80
DIFFERENTIAL PRESSURE (PSI)
DIFFERENTIAL PRESSURE (PSI)
BAR
BAR
4
2
0
6
44-MC
0.6
2.5 1750
0.5
8
0.6
3.0 1500
1500
0.4
0.3
900
1.0
POWER (BHP)
1140
1.5
6
0.5
2.5
9
1750
1140
0.4
2.0
900
0.3
1.5
POWER (BHP)
1750
FLOW (GPM)
7
FLOW (GPM)
0.7
1750
12
2.0
0.2
600
600
3
2
0.8
4.0
15
3.5
9
4
8
LPM
3.0
10
5
6
45-MC
LPM
11
6
4
2
0
8
0.2
1.0
600
0.5
3
0.1
600
0.5
0.1
1
0
0
0
0
0
20
40
60
100
80
0
0
0
20
40
60
100
80
DIFFERENTIAL PRESSURE (PSI)
DIFFERENTIAL PRESSURE (PSI)
BAR
0
2
tel. 908.518.0777
4
6
8
fax. 908.518.1847
BAR
0
2
4
6
8
w w w. l i q u i f l o . c o m
41
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
C E N T RY ® C E N T R I F U G A L P U M P S
Centry® Pump shown
Close-Coupled to sturdy
cast iron mounting bracket.
Liquiflo's Centry® line of Centrifugal pumps are
available in 316 SS or Alloy-C with either Packing,
Single Mechanical Seal, Double Mechanical Seal,
or Mag-Drive configuration.
MODELS AVAILABLE
MODEL
FEATURES
SIZE * (inches)
MAX FLOW
MAX HEAD
62
1 x 3/4 x 3 3/4
40 GPM
60 ft
62-1
11/4 x 1 x 5
75 GPM
90 ft
62-2
2 x 1 1/2 x 5
160 GPM
80 ft
63
1 1/2 x 1 x 6
125 GPM
160 ft
64
1 1/2 x 1 x 8
90 GPM
320 ft
General: Depending on the model, the
Centry® Series centrifugals are available
as standard with closed impellers. Closed
impellers eliminate axial loads and extend
the life of the motor bearings when the
pump is close-coupled to the motor.
Closed impellers simplify the axial positioning
of the impeller, when using close-coupled
sealed pumps.
Single Mechanical Seals:
* Suction Port Size x Discharge Port Size x Impeller Diameter
Single mechanical seals are the most
economical type of seal to use when
leakage is not desired. When properly
installed and maintained, these seals will
generally give years of trouble-free service.
350
300
Double Mechanical Seals:
Double Mechanical seals are also available
for the Liquiflo Centry® Series centrifugal
pumps. This seal configuration relies on a
barrier lubrication system to cool and
lubricate the seal faces.
HEAD (Feet)
250
Model
64
200
Magnetically-Coupled Pumps
175
These offer a simple and cost-effective
solution to sealing toxic, noxious, crystallizing
or most other fluids that present problems for
single seals and would therefore require use
of a double mechanical seal. Magneticallycoupled pumps eliminate the need for
cooling loops that are required for double
mechanical seals.
150
125
100
Model
63
75
50
Model
62
25
Model
62-1
Model
62-2
CUSTOMIZATION
0
0
25
50
75
100
125
150
175
Contact factory.
FLOW RATE (GPM)
42
tel. 908.518.0777
fax. 908.518.1847
w w w. l i q u i f l o . c o m
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
Features of Sealed and Sealless
Centry® Pumps
Centry® Model 62 Pump shown
Close-Coupled to sturdy Cast Iron
Mounting Bracket with and without
Power Frame Option
SEALED PUMP
Mechanically Sealed Pumps:
• Compact close-coupled design or
long-coupled mounting
• Back pullout design to simplify maintenance
MOTOR
• Type 9 or Type 21 seals are available
• Several choices for seal materials to
meet the requirements of the application
• Single or Double mechanical seal
configurations are available
Centry® Model 62-1 or Model 62-2
MAG-DRIVE PUMP
Mag-Drive Pumps:
• Double support sleeve bearings are available
in Carbon or Silicon Carbide to extend the
working life of the pump
MOTOR
• Optional hard Ceramic coated or Tungsten
Carbide coated shafts are available for
abrasive or thin fluids
• Available in compact close-coupled or
Power Frame design, depending on model
Centry® Model 62-1 or Model 62-2
tel. 908.518.0777
fax. 908.518.1847
w w w. l i q u i f l o . c o m
43
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
S P E C I A L S
S P E C I A LT Y P U M P S
SPECIALS
One of Liquiflo’s many strengths is their
ability to design and manufacture Specialty
Pumps. A Special Pump can be as simple as
modifying a port configuration or as complex
as a complete new pump design. Liquiflo’s
design and manufacturing engineers use their
years of pumping experience and knowledge
of engineered materials to custom design a
pump to meet specific applications. To date,
Liquiflo has designed over 700 different
specialty pumps which have solved numerous
problems in the chemical and industrial
marketplace throughout the world.
If you have an application that cannot use a
standard off-the-shelf pump, please give us
the opportunity to design a custom pump that
will meet the specific needs of your
application.
A few examples of Liquiflo’s custom designed
pumps are described and shown below.
“High Viscosity” Pump
Challenge: To pump a mastic with a viscosity similar to caulking at a
differential pressure up to 500 PSI and suction pressure of 1000 PSI. The pump
needed to be mounted on a 4-axis robotic head where it needed to discharge
a bead of mastic at a maximum rate of 17 linear feet per second. In order to
keep the inertia to a minimum, the pump needed to weigh less than 10 lbs.
Solution: A variation of the 37 Series was used. The pump casings were
made of aluminum to help minimize the weight. The internal construction was:
hardened steel gears, wear plates and shafts, sintered bronze bearings isolated
from the pumpage by polypac seals and externally grease lubricated. The
pump was close-coupled to a hydraulic motor and operated at a maximum
speed of 50 RPM. From design to shipment, the working prototype was
completed in just under eight weeks, and full-scale production was
completed within sixteen weeks.
“Ultra-High Pressure” Mag-Drive Pump
Challenge: Custom requirements were for a mag-drive pump that
could handle system pressures up to 1500 PSI (100 bar).
Solution: Containment Can and housings had to be designed to
withstand the unusually high pressure without catastrophic failure or
distortion that would affect operating characteristics. A solid 316 SS bar
stock body with extra heavy bolting was used in conjunction with an
extra heavy-walled containment can to withstand the extremely high
pressures. Test pressures of the newly designed pump exceeded
4500 PSI (300 bar). From design to shipment, the working prototype
was completed in under ten weeks.
Liquiflo Can Customize a Solution for Your Special Application
44
tel. 908.518.0777
fax. 908.518.1847
w w w. l i q u i f l o . c o m
L I Q U I F L O
C H E M I C A L
P R O C E S S I N G
P U M P S
TM
S P E C I A L S
“Glove Box” Nuclear Pump
Challenge: A pump was required for processing high-grade plutonium.
The pump needed to be mounted inside the “glove box.” The motor would
be mounted on the outside of the glove box and the pump would be
mounted on the inside of the glove box. In addition, due to the radioactivity
of the material being pumped, a further requirement was to have the ability
to remove the pump cartridge and/or the motor, without creating a breach
in the glove box wall.
Challenge Us
Solution: A double containment shell solved the problem. One containment
can was mounted to the pump in the normal manner while the second
containment can was mounted to the glove box wall. This configuration
maintained closure in the event that either the pump or the motor needed
to be removed for repair or replacement.
With Your
Toughest
“Bromine” Plastic Gear Pump
Pumping
Challenge: The requirement was to pump pure liquid bromine at a
differential pressure of 30 PSI.
Applications
Solution: This is one of a number of gear pumps that Liquiflo made
from plastic. This pump in particular was a Kynar version of a 35 mag drive
with Kynar coated inner magnet and containment can, tantalum shafting,
and unfilled Kynar housings. Other engineered plastics that Liquiflo has
manufactured gear pumps from include CPVC for herbicide service,
PTFE for ultra pure water service and Ryton for various services.
“Super Bullet” (Colloidal Suspension) Pump
Challenge: The requirement was to build a non-pulsing positive displacement
pump for pumping water containing colloidal silica for the paper industry.
The colloidal silica particles are extremely abrasive and small in size – just 2-10
microns. These abrasive particles work their way into the smallest of crevices
and accelerate wear of surfaces that exhibit any relative motion. The
customer found it impossible to find a pump that would last more than
a few weeks in this extremely difficult service.
Solution: Liquiflo’s designers solved this challenging application using a
variety of engineered materials that would work well together even in an
extremely abrasive environment. They also redesigned the internal
configuration of the pump to minimize the abrasive action that normally
takes place. After an extended effort, the chosen materials for the internals
of the pump were SiC on SiC bearings, and bearing-grade PEEK gears. A
small amount of carbon graphite was added to the inner SiC sleeve bearing
to give it some self-lubricating properties. With a service life now in excess of
12 months, our satisfied customer respectfully nicknamed it The “Super Bullet.”
tel. 908.518.0777
fax. 908.518.1847
w w w. l i q u i f l o . c o m
45