PDF Brochure

ABN 17 100 208 964
METERING PROFILE
GAS – WATER & ASSOCIATED CONTROLS
Accutherm International is a specialist company supplying high quality gas
control products, engineering services and support to all sectors of the gas
and water market.
Head Office (Melbourne)
Sydney
Brisbane (Distributor)
18 Pickering Road
2/14 Welder Road
17 Medway Street
Mulgrave VIC 3170
Seven Hills NSW 2147
Rocklea QLD 4106
T: +61 3 9763 6335
T: +61 2 9620 4123
T: +61 7 3255 9255
F: +61 3 9763 8003
F: +61 2 9624 2666
F: +61 7 3255 9655
sales@accutherm.com.au
www.accutherm.com.au
sales@gascomponents.com.au
Rotary Gas Meters
Turbine Gas Meters
Diaphragm Gas Meters
Turbine Gas Meters
GAS
Electronic Volume
Correctors
Dataloggers &
Communication
Hot & Cold Water Meters
WATER
Gas Pressure Regulators
Filters
Slam Shut & Relief Valves
Gas Safety Shut Off System
Solenoid Valves
Gas Detection
GAS CONTROL AND METERING SYSTEM SPECIALISTS
FMG FLOW METER GROUP
FMG specialises in the development and manufacture of energy and gas measurement systems. Located
in the Netherlands, FMG produces a wide range of rotary and turbine gas meters, volume conversion
devices, master meters and calibration benches.
Unique product features include self-diagnosis and tamper prevention. Their wide range includes models
up to 40,000 m3/h flow rates. Pressure ratings range are up to 100 Bar. All FMG meters comply with
international safety and metrological standards.
FMG FMR ROTARY GAS METER
The FMR series of rotary gas meters are designed to meet the highest demands of reliable and accurate
measurement of gas flow. There compact exchangeable aluminum cartridge allows local repair and on-site
cleaning. Installation stresses caused by connecting piping are minimal due to the robust design and
construction of the casing and cartridge.
Features:
•
Range from 0.2 to 1,000 m³/h
•
Connection sizes: DN40 to DN150
•
Pressure ratings: PN10 ~ 100 / ANSI150 ~ 600
•
Rangeability up to 160:1
•
Low frequency pulse output standard
•
High frequency pulse output optional
FMG FMT-Lx TURBINE METER
The FMT-Lx series turbine meters are designed to perform at the highest level of accuracy. The meter
complies with all international standards and is approved for custody transfer. The unique long body
design requires no minimum straight pipe diameters upstream or downstream of the meter.
Features:
•
Range from 5 ~ 10,000 m³/h
•
Connection sizes: DN50 ~ DN500
•
Pressure ratings: PN10 ~ 100 / ANSI150 ~ 600
•
Low frequency pulse output standard
•
High frequency pulse output optional
GAS CONTROL AND METERING SYSTEM SPECIALISTS
GA SERIES DIAPHRAGM GAS METERS
GA Series diaphragm gas meters are suitable for cost effective sub metering – domestic, commercial and
industrial applications.
The GA Series come standard with a low frequency pulse output for remote monitoring.
Features:
•
Standard sizes fit common connections
•
Made of steel which is polyester powder plastic coated ideally suitable for outdoor applications
•
Measures flow mediums of natural gas, LPG and air.
•
Cost effective
•
Each meter is fully tested for accuracy
•
Simple connection to gas pressure regulators
•
The performance and parameters comply with the
following Standards:
AS4647 – 2005 (Domestic diaphragm gas meters)
EN 1359 - 1999 (Gas meters. Diaphragm gas meters)
Minimum Flow:
m³/hr
Model:
Nominal Flow:
m³/hr
Maximum Flow:
m³/hr
G1.6
0.016
1.6
2.5
G4
0.04
4
6
G6
0.06
6
10
G10
0.1
10
16
G16
0.18
16
25
G25
0.25
25
40
GAS CONTROL AND METERING SYSTEM SPECIALISTS
GWF TRZ RADIAL BLADE TURBINE METERS
GAS
GWF srl manufacturer’s high quality gas measurement equipment and is the daughter company
to the renowned Swiss meter manufacturer GWF AG Luzern.
Features:
•
High quality
•
Flow ranges: 4 ~ 650 m³/hr
•
Connection sizes of DN50, DN80 and DN100
•
PN16 flange connection
•
Rated to 6 Bar
•
Low frequency pulse output standard
•
High frequency optional
ELGAS s.r.o.
Elgas s.r.o. specialises in the development, manufacture and supply of data collection equipment in the
gas and energy industry. They have smart metering solutions such as volume converters, dataloggers and
other communication systems.
Elgas miniELCOR Electronic Volume Corrector
The miniELCOR is a battery powered EVC, it is suitable for hazardous area applications with the addition
of an external intrinsically safe power supply.
The system uses secure sealed switches to prevent unauthorised configuration changes and obtaining
unauthorised data from the device. It comes equipped with a six button keyboard and backlit graphic LCD
display. Users can easily check instant values, device parameters or archives.
GAS CONTROL AND METERING SYSTEM SPECIALISTS
ELGAS s.r.o Cont.
Features:
•
One channel Electronic Volume Converter (EVC)
•
Designed to be used for installation in hazardous area – Zones 0, 1 and 2
•
Battery lifetime more than 5 years
•
Fully configurable device (Telves PC Software included)
•
Graphical backlit LCD display 128 x 64 pixels
•
Possibility to connect 3rd pressure or temperature sensor
•
Possibility to connect second EVC as subsystem
•
Typical error under reference conditions < 0.15 % from measured value (<0.5 % - MID)
•
Certificate IECEx & ATEX
•
Protection class IP 66
•
Working temperature -25°C to +70°C
•
Communication: Serial interface: RS232 / RS485, Optical interface: IEC 62056-1
•
Four digital inputs/outputs
Optional Accessories:
•
Infrared USB Head HIE-04
•
Current Output Module CL-1 (4 - 20 mA)
•
240V External Power Supply
GWF WATER METERS
WATER
Accutherm International represents Swiss water meter manufacturer GWF MessSysteme AG.
GWF is the market leader for innovative measuring instruments. Their extensive range of
intelligent smart metering solutions and world renowned GWFcoder® technology guarantee
enhanced energy efficiency.
GAS CONTROL AND METERING SYSTEM SPECIALISTS
GWF WATER METERS Cont.
WATER
UNICO Single Jet Water Meter
GWF UNICO Single Jet water meter is suitable for cold water application up to 30°C, warm water
applications up to 90°C and hot water applications up to 120°C.
The UNICO Meter is available in DN15 and DN20. It is suitable for measurement of low flow rates up to 2.5
3
m /hr nominal flow rate. It is a robust design with high grade wear resistant materials and has an excellent
measuring stability and reliability.
Features:
•
Single jet dry-dial meter with magnetic coupling
•
Register can be turned for best readout position
•
Maximum operating pressure PN 16 bar
•
Maximum operating temperature: 30°C, 90°C, 120°C
•
Horizontal or vertical installation
•
5 dial resolution
•
High grade wear resistant and corrosion proof materials
•
Inlet strainer
•
Reconditionable and recyclable execution
•
Conformity to EEC Standard
•
Available with IP14 Pulse Generator.
•
UNICOcoder™ models with MBUS interface EN 13757-2/3
MT Multi Jet Water Meter
GWF MT Multi Jet water meter range is available in the MTK cold water models, suitable for applications
up to 30°C. The MTW warm water models are suitable for applications to 90°C and the MTH hot water
models, suitable for applications up to 130°C.
Sizes are available in DN15 to DN50 in threaded and flanged models are available in sizes from DN20 to
3
3
DN50. The horizontal models are suitable for nominal flow rates up to 15 m /h and 10 m /hr nominal flow
for vertical models. It is a robust meter with a long service life and high grade wear resistant materials. It
has an excellent measuring stability and reliability.
GAS CONTROL AND METERING SYSTEM SPECIALISTS
GWF WATER METERS Cont.
WATER
Features:
•
Horizontal or vertical installation (Vertical riser/down pipe)
•
Register can be turned through 360°
•
Maximum operation pressure PN 16 bar (Flanged PN 25 bar)
•
Maximum operating temperature: 30°C, 90°C or 130°C
•
SVGW Certification, Conformity according to EEC Standard
•
Available with IP14 Pulse Generator
•
MT_coder™ models with MBUS interface EN 13757-2/3
Woltman Water Meter
GWF Woltman series is suitable for cold water applications up to 50°C and hot water applications up to
130°C.
Sizes are available in flanged connection from DN50 to DN300. The WPDK cold water meter range is
suitable for nominal flow rates up to 1400 m³/hr. The WPDH hot water range is suitable for nominal flow
rates up to 600 m³/h. The Woltman range is a robust design with high grade wear resistant materials, it has
an excellent measuring stability and reliability. It has a removable measuring insert which is easily
replaceable and retrofitted.
Features:
•
Universal installation position
•
Straight flow section 3xDN
•
Register can be turned through 355°
•
Maximum operating pressure PN16 bar
•
Maximum operating temperature: 50°C or 130°C
•
SVGW certification
•
Flood proof standard pulser register (IP68) with ports for two Reed-RD-Pulsers and one Opto-ODPulser
GAS CONTROL AND METERING SYSTEM SPECIALISTS
PIETRO FIORENTINI
Pietro Fiorentini, have over 60 years of international experience in the design, manufacture and supply of
components, systems and services to the transmission, distribution and domestic gas markets.
GOVERNER Regulators
Fiorentini Minireg spring-loaded governors are designed and built to comply with UNI EN 88 class A group
2 specifications and can be used for all types of natural gas, LPG or non-corrosive gases. These
regulators are widely used in supply lines for mixed and combined burners and in the piped distribution of
methane gas and LPG in both industrial and non-industrial applications.
Features:
•
Compact models: DN15, DN20, DN25
•
Low pressure OPSO models: DN20 & DN25
•
Full capacity models: DN15 to DN100
•
Spring loaded
•
Self-acting with balanced stem and seat
•
Double safety diaphragm
•
Enables internal use without connecting an external vent pipe
•
Supplied with internal sensing line and inlet/outlet pressure test points
•
Limited venting to atmosphere
•
Easy installation
•
Recyclable
•
Aluminium body
•
Compact lightweight design
•
Inbuilt filter available
•
External test points
GAS CONTROL AND METERING SYSTEM SPECIALISTS
PIETRO FIORENTINI Cont.
FE Series OPSO Regulator
The FE series of two stage self-driven spring loaded regulators are widely used in installations using
natural gas, LPG and other non-corrosive gases. They are designed for either direct installation to a gas
meter or used in general pipeline work.
Features:
•
Balanced double stage (2 stage)
•
Includes Over Pressure Shut Off (OPSO)
•
Rated 8.6 Bar
•
Available in: 25m³, 50m³, 75m³ and 100m³ models
•
Self Driven
•
High accuracy
•
High operating reliability
•
Simple installation
•
Limited venting
•
Option to have a double main diaphragm for extra safety
•
Multiple connections to suit most installations
•
External test points
•
Perfect complement for Accutherm meters
•
Inbuilt filter – 100 micron
•
Underground models available
Model:
Capacity
Model FE25
Model FEX
Outlet Range:
mBar
Inlet Connection:
BSP
Outlet Connection:
BSP
FE25-BP
25 m³
13-180
15mm
25mm
FE25-TR
25 m³
180-500
15mm
25mm
FES-BP
50 m³
13-180
15mm
25mm
FES-TR
50 m³
180-500
15mm
25mm
FEX-BP
75 m³
13-100
25mm
40mm
FEX-MP
75 m³
100-350
25mm
40mm
FEXS-BP
100 m³
13-100
25mm
40mm
FEXS-MP
100 m³
100-350
25mm
40mm
GAS CONTROL AND METERING SYSTEM SPECIALISTS
PIETRO FIORENTINI Cont.
HP100 First Stage LPG Regulator
The HP100 series of spring loaded, diaphragm controlled balanced plug regulators are
suitable for medium and high pressures. They are widely used in the distribution of Natural
Gas, and LPG where good performance of regulation and fast response to flow rate
variations are required. Most commonly used as 1st stage reduction for domestic,
commercial and industrial LPG applications. It has 25mm NPT connections and includes
over pressure shut off (OPSO).
DIVAL 500 Regulator
The Dival 500 series of spring loaded, diaphragm controlled balanced plug regulators are
suitable for low, medium, and high pressure applications. The Dival 500 Series is
available with an integral 20Bar rated Slam Shut valve.
DIVAL 600 Regulator
The Dival 600 series of direct acting regulators are suitable for low and medium pressure
applications controlled by a diaphragm and counter spring. Modular design of this series
allows the installation of an incorporated slam shut or device for use as in line monitor on
the same body without changing the face-to-face dimension. It has an open top entry
design, allowing easy periodical maintenance without removing body from the line.
106 Gas Filter
The 106 series of gas filters are designed to filter non-corrosive dry gases at 50 microns.
Rated to 10 bar, they are available in BSP threaded models from DN15 to DN50. Flanged
models are available in DN50 to DN100 which universal flange suiting ANSI150 and PN16.
Model DN150 is 2 Bar rated.
GAS CONTROL AND METERING SYSTEM SPECIALISTS
ACCU-TEST GAS SAFETY SHUT OFF SYSTEM
The ACCU-TEST is an emergency shut off system which is purposely designed to prevent gas being
restored to open downstream piping and can easily be linked to emergency interlocks.
Features:
•
Function of pressure proving in accordance to AS5601
Gas Shut Off
•
Can be monitored by BMS
•
Required where downstream appliances do not have
intgral flame safeguard
•
Assembled & ready for easy installation
•
Automatic activation following successul pressure test
•
Manual activation required following failed pressure test
Applications:
•
Hotels & Motels
•
Shopping Centres
•
Hospitals & Health Care Facilities
•
Sporting Clubs
•
Laboratories
•
Restaurants & Commercial Kitchens
•
Schools & Education Facilities
Accessories:
Emergency Stop Buttons, interlock relays, signage, gas alarm/sensors (Combustible, CO)
Standard Low Pressure 240V Systems:
Natural Gas
Size:
15mm
25mm
40mm
50mm
65mm
80mm
100mm
LPG
MJ/h
m³/h
MJ/h
m³/h
307
801
2,261
3,202
4,522
6,288
12,673
7.9
20.6
58.2
82.5
116.5
162.0
326.6
471
1,231
3,472
4,918
6,945
9,659
19,466
4.9
12.8
36.3
51.5
72.7
101.1
203.8
Part Number:
LS-FS-015-ACCU-240V
LS-FS-025-ACCU-240V
LS-FS-040-ACCU-240V
LS-FS-050-ACCU-240V
LS-FS-065-ACCU-240V
LS-FS-080-ACCU-240V
LS-FS-100-ACCU-240V
*Flow rates based on 2.5 mBar pressure drop
For different voltages, sizes or pressures please call 03 9763 6335
GAS CONTROL AND METERING SYSTEM SPECIALISTS
HONEYWELL
VE Series Soleniod Valve
•
Normally Closed
•
Pressure rating up to 36 KPA
•
240V Sizes: DN15 ~ DN100
•
Low Voltage Sizes: DN15 ~ DN50
Maxon Gas Electro-Mechanical Valves
•
Sizes: DN20 ~ DN150
•
Automatic & Manual Reset
•
Normally Closed & Normally Open
•
Unique Sliding Gate Valve Design
•
Pressure rating up to 8.6 Bar
C6097 Series Pressure Switches
•
Designed for use with gas and air
•
Suitable for upper & lower limits
•
IP54 Enclosure standard
Fixed Gas Detection
•
Combustible Gas Monitoring for Meter Room/Boiler
Room Applications
•
Carbon Monixide Monitoring for Car Parks, Kitchens,
Laboratories
•
Carbon Dioxide Monitoring
•
Oxygen & Other Toxic Gases available upon request
S:\SALES & MARKETING\ADVERTISING & MARKETING\ACCUTHERM PROFILES\ACCUTHERM METERING PROFILE JULY 2015.DOCX
GAS CONTROL AND METERING SYSTEM SPECIALISTS