used woodworking machines eng

Transcription

used woodworking machines eng
NIMAC GROUP second hand wood working machines 11/2014
BEAM SAW STETON 3800/3800
Year: 2000
Plc control
Grippers
___________________________________________________________________
BEAM SAW
GIBEN TYPE
SMART80 SPT
YEAR 2006
PERFECT CODITION WITH 0 WORKING HOURS
TRANSPORTATION :INCLUDED
INSTALLATION:EXTRA CHARGE
Useful cutting dimensio ns 4400 x 2200mm
Cutting height 80m m
Lifting capacity 1-80 panels with load
Cutting speed 60m/min
Moter 15Hp
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
BEAM SAW
GIBEN TYPE
PRISMATIC SPT
H 115 G DRIVE
Cutting length: 5700mm
Main saw motor:13.2kw
Saw blade projection:115mm - Gripper oppening:117mm
Electromechanical lift table 5700x2200mm c/w powered roller modules
Left hand side loading
Automatic thin material loading device
Automatic saw blade height adjustment
Brushless servomotor for saw carriage traverse
Brushless servomotor on pusher
External side and height scoring saw adjustment
Scoring saw exclusion by selector switch
Roller bed under pusher bar
Double sided side aligner with automatic pre-positioning by encoder
Front and rear standard square fences
6 air floatation tables 2000x510mm c/w 1 air generator
Enable rs 232 card
Safety devices according to EC regulation
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
BEAM SAW HOLZMA TYPE
HPP380/43
Year 2004
Cutting height 95 mm
Cutting length 4300 mm
Cutting 4250 mm
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
CASADEI KC80 ΙΤΑLY
SINCE 2007
0,4-3mm pvc
End trim station
Scrapers
Buffers
___________________________________________________________________
CEHISA
COMPACT–4.2
,ABS-PVC PVC 0,4- 2,0mm.
Panel thicknesss8-50mm.
Min piece 75X120mm.
End trim station 0.27KW.
Trimming unit. Speed 10m/min.
___________________________________________________________________
EDGEBANDER VIRUTEX
REF.:90.02.03
Year 2002.
Edging pre-glue tape
End trimming unit
Trimming unit
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
EDGEBANDER
MACHINE SCM
TYPE K1000
PERFECT
CONDITION
SINCE YEAR 2007
Premilling Gro up with pneumatic positio n a nd diamond cutters 50mm heig ht
Premelter edging w ith the glue tank above
End trimming Gro up
Trimming Group with straig ht cut (2 mo tors)
Trimming Group with radius cutters (2 motors)
Corner rounding with 2 mo tors
Radius scrapers gro up
- Flat scrapers group
Not included
Transportation from abroad
Buffing gro up
Hot air blowers for the pvc - C leaning spray sta tio n
Electric adjustment of pressure beam A utomatic settings. T ouch screen Control
__________________________________________________________________
EDGE BANDER
BRANDT
End trimming Group
Trimming Group
Post forming Group
Scrapper Group
Buffer Group Grooving
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
EDGEBANDER
MACHINE
TURANLAR
T EB601
Year 2005
Premilling station with diamond cutters
Edging tape 0,4 -3mm pvc and solid wood till 6mm.
End trimming
Trimming group with radius cutters with 2 motors
Corner rounding with 2 mo tors
Scrapers-buffers
__________________________________________________________________
EDGEBANDER
MACHINE
TURANLAR
T EB601
YEAR 2006 - Motor 1 2kw
Premilling Gro up with diamond c utters
Edging tape 0,4 -3mm pvc and solid wood till 6mm.
End trimming group
Trimming group with radius cutters with 2 motors
Corner rounding with 2 mo tors
Scrapers-buffers
Grooving
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
EDGE BANDER BCR
Year 2002
Premilling Group
End trimming Group
Trimming Group
Post forming Group
Scrapper Group
Buffer Group
Grooving
__________________________________________________________________
ΒΙΕSSE STREAM
Premilling-moulding.
End trimming
Trimming group
Trimming group
Scrapers - buffers
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
EDGEBANDER BRANDT
TYPE 530C
Year 2007
Applies 0,4 – 8mm
Work piece width 8-60mm
End trimming
Trimming group
Post forming- with one motor
Scrapers - buffers
2 feeding speeds 12-14mm
Machine length 4760mm
___________________________________________________________________
EDGEBANDER BRANDT TYPE 540GC
Year 2008
Brusless motors
Grooving group
Pre-milling group
Applies 0,4 – 8mm
End trimming
Trimming group
Post forming
Scrapers - buffers
Work piece width 8-60mm
2 feeding speeds 12-14mm
Machine length 5260mm
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
EDGEBANDER BRANDT TYPE
KD68CF
Year 2003
Grooving group
Pre-milling group
Applies 0,4 – 8mm
End trimming
Trimming group
Post forming
Scrapers - buffers
Work piece width 8-60mm
2 feeding speeds 10-11mm
Machine length 5740mm
Recently change of whole glue pot, including premilling cutters
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
CNC MASTERWOOD WITH 4 CONTROLLED AXIS TYPE 400L
EXCELLENT CONDITION - RECENT FULLY SERVICE
1 4 KW l i qu i d co o li n g e lec tr o s pi n dle H S K
1 9 s pi n dle dr illi n g he ad
1 0 0 m3 pu m p
Bel t co n ve yo r
Remo t e c o n tr o l
C-a xi s
T o o lc ha n g er fo r 1 2 to o ls i n th e ba c k & s eco n d T o o lc ha n g er fo r 1 0 to o l s i n t he fr o n t
8 su p p o r t
Pr e ar r a n ge me n t fo r c lam ps
Y ear 2 0 0 6
Not included
Transportation from abroad
Installation
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
CNC MASTERWOOD WITH 4 CONTROLLED AXIS TYPE 415
Year 2004
Motor 7kw iso 30
6 automatic toll changing
16 drillings
Χ – Ψ disc
Useful working dim 3,00 Χ 1,30m
Vacuum 3,00X1,30
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
CNC ROVER B 2.30
Year 2004
Useful working dim. 3200x1300mm
Ζ 260mm
10 automatic toll changing
Boring head
Lifting bars for easy loading and
unloading panels
Tape for removing sawdust
6 bars and 2 vacuums each
electronic edication of vacuum
position
Cones, collets and tools are mounted
to the machine
EXTRA
Extra cost for uninstalling and
installing the machine to client facilities
Extra transport cost
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
CNC BIESSE
ROVER 20
Year 2002
Few working hours
16 boring drills - saw
blade disk
Milling motor 12HP.
Total horsepower of
the machine 20HP.
____________________________________________________________________
CNC TECH80
Year 2000
Useful working dimensions 2400Χ1000mm
6 automatic toll changing
Drillings and saw blade
Περιλαμβάνει επίσης κώνους, μαχαίρια απλά και διαμαντένια
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
CNC JET 3006
BUSSELATO
GRUPPO DELLMAC
YEAR 1998
Axis stock
Χ 2800mm
Υ 900mm
Ζ 80mm
Maximum working width
150mm.
Axis speed
Χ 70mt/1’
Y 60mt/1’
Z 15mt/1’
Equipped:
Vacuum pump 100m 3 .
Reference point.
Measuring device for support position
Two 0 positioning places – two working areas
Working table type TL. 1250mm for pneumatic stability (6 pieces)
Trilling head type MP14 consisting from 14 independent vertical drills (8 to axis Χ
and 6 to axis Υ)
2 double horizontal heads for horizontal drills with direction axis Y.
1 saw blade group with manual rotation .
Three Router groups 9,2kw (12,5HP).
Inverter 11kw
3hp motor for 14 independent drillings
Tele-service kit for control machine from distance
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
AUTOMATIC DOWEL AND BORING
MACHINE VITAP TYPE SIGMA
Boring machine
Automatic for loading and unloading
____________________________________________________________________
SINGLE LINE BORING MACHINE WITH
3 HEADS
CHAMP FOND TYPE LB65F
____________________________________________________________________
BORING MEZA
Semi-automatic boring machine with
21 drillings
One boring head for horizo ntal,
vertical and a n a ngled drilling.
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
4 SIDE MOULDER GRIGGIO
4 Heads
Useful working width 180
___________________________________________________________________
4 SIDE MOULDER
REIGNMAC MDG4023
Year 2005
6 heads
Working width 230mm
Excellent condition
Few working hours
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
KUANG YUNG MRS-350
MULTIRIP SAW
1 year work
Technical specifications:
Max. Cutting thickness: 120mm Max. Cutting width: 350mm
Min. Working length: 650mm Min. & max. Saw blade diameter: ø250mm - ø405mm
Sawblade bore: ø70mm - Saw arbor speed: 3800 r.p.m.
Variable feed speed (inverter): 7,5 – 30 m/min.Saw arbor motor: 75hp. Feed motor: 3hp
Includes 1.5 meters infeed roller table
With guiding power driven roller for the accurate feeding of
Automatic lubrication of the feed chainWith electrical amperage display & overload
protection
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
SPECIAL CHAIN MORTISING MACHINE
Year 1998
For door handles and door locks
______________________________________________________________
CHAIN MORTISING MACHINE
MESA SPECIAL
For door handles and door locks
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
PLANER – THICKNESSER
MACHINE
STETON TYPE AD 51
Year 2006
Useful planer width 50mm
______________________________________________________________
THICKNESSER MACHINE
SCM TYPE S520
Useful thickness width 50mm
______________________________________________________________
PLANER SAC SUERI
TYPE SACF43
BRAND NEW – NOT USED
Useful planer width 40mm
MADE IN ITALY
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
M O U L D E R SCM TYPE T130E
N OT US E D
ELECTRONIC
With side carriage for frames
Programmer for the programming of the
shaft positio n a nd the shaft positio n
Automatic feeder
Motor 10ΗΡ.
Brand new set of tools for frame price 5.000€
Set tools for door frame, made in Italy by RESCO Company.
Including also tool for aluminum sill
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
MOULDER SCM Τ130
COD.:90.04.21
Disk for strips.
Motor 10ΗΡ.
10.000 rpm
________________________________________________________________
MOULDER SCM TYPE Τ110
With feeder
Year 1995
______________________________________________________________
MOULDER STETON WITH FEEDER
With support
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
SCREW COMPRESSOR ABAC TYPE GENESIS
15
SCREW type tri AB 69. electronic motor type ΙΡ54, Electronic control
type MC2.
With drier (built in), insertion and extraction. Start delta
Automate noiseless air blower, air filter, air – oil separator tank, easy to
replace it, entry filter, valve filter, pre-filter cabin. Air & oil refrigerator. Air
tank, minimum pressure valve, automatic belt stretch device
Tank 500.
3
1930 Lit/min. Horsepower 20HP. Pressure 10bar. 84m /h
Excellent condition with recent full service
________________________________________________________________
SCREW COMPRESSOR 1 0 Η Ρ
INDEPENDENTLY ΚΑΖΑΝΙ AND
SCREW
________________________________________________________________
ASPIRATION 12,5ΗΡ
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
RAW VENEER CUTTING
MACHINE VEENER
CASATI TYPE 3100
Year 2000
Made in Italy
Length 3000mm
1 guillotine
______________________________________________________________
ZIK ZAK
VILLA - MARIO
Year 2000.
Made in Italy
2 speeds and 2 threads.
______________________________________________________________
GLUE COATING MACHINE
FIN
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
DOOR FRAME MACHINE OMEC T Y P E
F9
Minimum length 500mm
Minimum width 100mm
Min / max. Indents 50mm
Minimum Case
Thickness 30mm
Minimum Crosspiece
Thickness 30mm
Maximum length 2500mm
Maximum width 290mm
Maximum Case Thickness 50mm
Maximum Crosspiece 50mm
________________________________________________________________
HOMAG
Electrical
_________________________________________________________________
CALIBRATING MACHINE
FOR MDF
With one spindle mo ulder head
and 2 sa nding belts
With chain
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
SCM SANDYA 3
Year 2004.
2 rollers and pad
useful dimension 950mm.
____________________________________________________________________
PAOLONI KALIBRA 20 R-KRT
few working hours
U se f ul l en g t h 1 1 0 0 m m.
Mi n. Pi ec e i n fir s t r o ll er 2 6 0 m m.
Mi n. Pi ec e i n s ec o n d r o ller 3 7 5 mm.
Cali br at in g p a per le n g t h 2 2 0 0 m m. W i dt h 1 1 3 0 mm.
Motor power 2 speeds 12/15ΗΡ.
1 s t group.Steel Φ140 mm.
2 n d group : Roller from rubber Φ140mm, 35 Sh +pad
Speed variation 3,5-20m/min –motor 1,36HP. Electro pneumatic system
for synchronized the rollers. Pneumatic synchronized pad in many pieces
for not breaking corners in sensitive materials. Automatic positioning
according the panel thickness. Electronic height measurement.
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
CALIBRATING MACHINE CAB
MADE IN ITALY
Useful length 1100mm
________________________________________________________________
CALIBRATING MACHINE
HΟUFEK TYPE MAXX RC1100
Year 2007
Electronic
Vacuum table
2 rubber rollers and one tabon
Weight 5000kg
Total power 5000kg
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
VACUUM PRESS ORMA PRICE
YEAR 2008
NOT USED
Air system 25.14
Pressing dimensions 2340Χ1340mm
Max panel dimension 2240Χ1240mm
Total pressing weight 200 tons.
Pressing capacity 25kg per cm
Μax panel height 50mm
4 cylinders with diameter 140mm each
Pressing stroke 100mm
Total power 22kw
Weight 7200kg
Hydraulic cylinder movement
Electromotor of hydraulic pump with power 4ΗΡ
INCLUDING EXTRA EQUIPMENT
Manual Pvc Transfer and cut with capacity of 2 rolls
Pin system
Up plate’s membrane with quick position
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
HYDRAULIC PRESS
Useful dimensions 2500X1300mm.
6 pistons
__________________________________________________________________
HYDRAULIC PRESS
HOT
Useful dimensions 250Χ130m
4 pistons
__________________________________________________________________
HYDRAULIC PRESS
COLD
Useful dimensions 250Χ130m
4 pistons
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
AUTOMATIC SAWMILL LINE FOR LOGS
PRICE: UNDER DISCUSSION
HYDRAULIC LOADER
HYDRAULIC LOADER
& CARRIAGE
MOVABLE 4 DISCS
HYDRAULIC LOADER
& HYDRAULIC CONTROL PANEL
CUTTER & CARRIAGE
CUTTER & CARRIAGE
ROLLING TABLES
SIDE UNLOADED
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
CUTTER
HYDRAULIC
CONTROL PANEL
SILO
NIMAC GROUP second hand wood working machines 11/2014
AUTOMATIC SAWMILL LINE FOR LOGS
TECHNICAL DETAILS
AUTOMATIC woodworkind band saw for automatic production line with 4 movable
disks one stable of Ustunkarli, the disks are moving by rack & pinion a different system of
PAUL it is a great system for lengthwise improvement of plate. It is able for big production. It
is equipped with one motor of 34kw. It can process plates with width up to 80cm and height
12cm. The machine is new and it hasn’t work at all.
New automatic sawmilling log line of Roulmac / Storti Blue-Line with pulley diameter 140cm,
automatic hydraulic rotation system, central control console for distribution of timber in
three selective unload stations
Steam boiler with a production 1.500.000 cal of company Coima / Timsan that can
automatically burn sawdust coming from the silo (it has reception system that can be
interfaced with any type of silo). Is ready to send sufficient steam to 5 x 60 barns
Italian Silo of company Coima that can absorb dry or wet sawdust with storage capacity 170
cubic meters Sucks sawdust or chips through four lines suction strainer. It is made in Italy
and has a full automatic loading & unloading sawdust to or from a truck and automatic
connection and power energy systems (eg boilers or burners ) with raw material sawdust
and wood chips.
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
2 SIDE CUTTING PANEL SAW ref:90.01.20
Year 1985.
Usefull cutting dimensio ns 3660X1250cm.
_________________________________________________________________
MANUAL 2 SIDES PANEL SAW
ref. : 9 0 . 0 1 . 1 4
Year 1989.Useful cutting dimensions:3660Χ 1250cm.
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
2 SIDES PANEL SAW M E K A N I K A
Useful cutting dimensions 380Χ 185cm.
Digital measuring
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
2 SIDE CUTTING
PANEL SAW
NIKOLAIDIS
Ref:90.01.25
Year 1997
Useful cutting dimensio ns 3800X1850
Automatic 2 side cutting saw with tilting saw blades.
Material hold by pressure beam. Adjusta ble pusher stroke
Suction over and under the saw bladePost forming cut in sid e stroke.
Computer with mem ory and a utomatic c uts, plc control of the machine (to uch
screen)
Automatic c utting strips.Overload dimensions 5000x3500mm.
Fully restored a nd p ainted with 6 months warranty (warra nty including
replacement o f mec hanical and electrical equipment in case of damage, not the
technician visit).
____________________________________________________________________
BEAM SAW SCM
New electric board.
Plc to uch screen control –automatic positioning a nd strips cutting.
Memory with 100 programms
Year 1989.
Useful cutting dimensio ns 1250X1850mm.
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
BEAM SAW NIKOLAIDIS
ΤΕΜΑ3700
Year 1999.
Cutting dimensions: 3700X1850mm
Electronic measurement with electric pusher.-no grippers
Cutting height 55mm
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
HORIZONTAL STRIEBIG
TYPE ECONOM II
Year 2003
____________________________________________________________________
HORIZONTAL BEAM SAW ELCON TYPE 215DS
Saw blade with diameter 250mm
Saw blade motor 3HP
Saw blade rotation 5100rpm
Max. working length 3300mm
Max. horizontal cut 2200mm
Max. vertical cut 2150mm
Cutting depth 55mm
Overall dimensions 5080Χ3060+60Χ1450mm
Specifications of the European Union "CE"
Photocell on mobile back. Tracer Guide for repeated cuts.
Manual programming cuts. Section driver for small cuts
Monoblock rigid beams (up - down) The wagon moves on over steel shafts
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
POST FORMING MACHINE TYPE CA366
Year 2006
Cutting width 1000mm. Pusher stroke 3660mm.
Automatic with plc control.
Pusher with 3grippers.
__________________________________________________________________
POST FORMING MACHINE
TYPE PF090
Year 2007
Cutting width 90cm
Automatic lubrication.
Main saw Moter 5,5HP.
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu
NIMAC GROUP second hand wood working machines 11/2014
POST FORMING TYPE PF090
Year 2005
Cutting width 900mm
4 measurement stops
2 working tables 1500mm
Main motor 5,5HP
Grooving motor 2HP
17th Klm O.N.R Thessaloniki – Kavala 57200, Lagadas P.O.Box 208 - HELLAS
telephone: +30 23940 53030 fax: +30 23940 53031
email: info@nimacgroup.eu web: www.nimacgroup.eu

Similar documents

nimac catalog 3-2015web

nimac catalog 3-2015web which allows rapid execution of the cutting programs. Additional features are immediate error recognition and on-screen diagnostics for the operator. Super precision in measuring providing by hi-te...

More information

gov.gr kep

gov.gr kep marpl@emprosnet.gr, info@lesvosnews.gr, LESVOS POST ~lesvospost@gmail.com~, go-@otenet.gr, tvmitilini@otenet.gr, dorapol@gmail.com, takis iordanis , info@plomarinews.gr, info@le...

More information