Delden Garage Doors

CDC-1380 and CDC-2000
CDC-2000 – 2" thick commercial
performer. Available up to 432 square feet.
The low-profile commercial performer
that utilizes two-sided steel construction
against an expanded polystyrene core to
achieve maximum section rigidity in an
attractive shallow-rib design.
Each section is thermally-broken at two
points between interior and exterior
skins; section joint “wear seals”
eliminate friction and noise.
Available with a host of window,
weatherseal and special lift options.
CDC-1380 – 1-3/8" thick commercial performer. Available up to 192 square feet.
Delden Garage Doors has been known and respected for its standard of excellence since 1964. Careful attention to detail, the
highest quality construction, and unique features are built into each and every Delden door. Regardless of model or style, you
can be confident that the Delden door you choose is the finest available and will provide the utmost in security, beauty and value.
GARAGE
DOORS
“Experience the Quality”
CDC-1380 and CDC-2000
CDC-1380
CDC-2000
27/27 ga
24/27 ga
R-Value
6.58
9.19
U-Value
.15
.10
Continuous silicone thermal break
Yes
Yes
Self-lubricating wear seal strip
Yes
Yes
Baked-on paint finish
(0.3 mil primer / 0.7 mil top coat)
Yes
Yes
16'-2"
24'-2"
Section heights
18", 21" & 24"
21" & 24"
Door Thickness
1-3/8"
2"
12'
18'
Steel Thickness (actual)
Section widths (maximum)
Overall door height (maximum)
CONSTRUCTION
SPECIFICATIONS
Steel door sections are
sandwich-type construction consisting of an exterior and
interior “stucco”-embossed skin bonded to an expanded
polystyrene core. Both steel skins to be separated at joints
by a continuous silicone bead to form a true thermal
break. Steel skins to be of commercial quality with G-40
hot-dipped galvanization. A baked-on paint finish of 0.3
mil primer and 0.7 mil polyester top coat shall cover
exposed steel. Exterior steel skins to have .040" minor ribs
in either 4" or 5" increments, on center. End stiles to be
.038" minimum. Reinforced plates are present and prepunched at all hinge locations for internal hardware
support and ease of installation. Full-length aluminum
astragal retainer and U-shaped flexible PVC vinyl to attach
to bottom section. Sections to be weathertight at joints by
employment of full-width self-lubricating wear seals.
Delden’s CDC is of sandwich-type
design, is constructed of hot-dip galvanized interior and exterior
steel skins adhered to an expanded polystyrene core with a specially
developed adhesive. Section joint “wear seals” provide additional
thermal break, and minimize friction and noise through the seal’s
self lubricating properties. Hardware locations are reinforced with
steel backup plates. Section skins are pre-formed with a soft
“stucco” finish; shallow “ribs” enhance the appeal of door sections’
front side.
EFFICIENCY
The expanded polystyrene core insulates
against the elements with a very efficient “R” value. Air infiltration
is minimized by a superior tongue-and-groove design that utilizes a
polypropylene wear seal. This long lasting wear seal and joint
design stop the weather elements at the face of the door and allow
the internal thermal breaks to perform more efficiently. The
accommodating U-shaped bottom weatherstrip seals tightly against
floors that may be rough or out of level. With a host of weather seal
options for various jamb and header conditions, air infiltration is
further minimized. Delden offers a fully “finished” opening that is
aesthetically pleasing and thermally efficient.
OPTIONS
Currently available in white, with soft “stucco” finish. Delden
offers a wide range of hardware and track specialties to accommodate various
field conditions. This list includes, but is not limited to the following items:
•
•
•
•
•
•
•
•
•
A wide range of perimeter waterseals
Adjustable bottom weatherstrip retainer rail
Adjustable operator bracket for reinforced drawbar attachment
Various window options (contact your Delden Branch Office)
Low Headroom track assemblies
High Lift track configurations
Follow Roof Pitch track configurations
Full Vertical track
Locking options / Exhaust ports / High Cycle torsion springs / Chain hoist
KANSAS CITY, MISSOURI
GARAGE
DOORS
“Experience the Quality”
www.deldenmfg.com
10M 07/08