Refraction Unit

Transcription

Refraction Unit
Refraction Unit
english
Individually designed
for dynamic and
advanced optician and
ophthalmologists
Wagner & Guder UG (mbH) & Co.KG
Dorfstraße 57
D-99510 Hermstedt / Thüringen
Tel.: +49 (0) 36 44 / 51 55 61
Fax: +49 (0) 36 44 / 51 55 63
E-Mail: info@wagner-guder.com
www.wagner-guder.com
Distribution and Service
This media product
has been produced by:
This project has been co-financed by the European Union
and the Free State of Thuringia.
European Regional
Development Fund (ERDF)
Development, design and
assembly for medical device
technology and engineering
Thuringian Ministry of
Economy, Labor and
Infrastructure
made in Germany
Refraction Unit
Refraction Unit
Dimensions:
MOTIVA offers an individual and efficient spatial concept and might be arranged up to a complete
workstation on the smallest floor space. It is consignable in two versions: for right or left hand users and
combines maximum operating comfort with small prices. By using flexible possibilities of connection and
optimal wiring solutions is it an enrichment for each store or practice facility.
Technology and Innovation "Made by Wagner & Guder" Germany
Type 1 (selected facilities):
- refraction unit MOTIVA with two device table in right MOTRE-02 or left hand unit MOTLE-02
- basic electrical equipment with transparency keyboard
- projector column with reading lamp
patient chair:
- seat beech
- armrest (one side collapsable) AL2006-171
- adjustable headrest black leatherette KO2006-595
Type 2 (selected facilities):
- refraction unit MOTIVA with two device table in right MOTRE-02 or left hand unit MOTLE-02
- manual phoropter arm swinger PH2006-584 or
swivel-mounted manual phoropter arm PS2006-004
- case for lenses (different types on request)
- basic electrical equipment with transparency keyboard
patient chair:
- seat beech with seat and backrest, imitation leather black SI2006-605
- armrest (one side collapsable) AL2006-171
- adjustable headrest black leatherette KO2006-595
- foot support single FS1103-331 or double FS1103-330
- special seat for children SI2006-622
Type 3 (selected facilities):
- refraction unit MOTIVA with two device table in right MOTRE-02 or left hand unit MOTLE-02
- manual phoropter arm swinger PH2006-584 or
swivel-mounted manual phoropter arm PS2006-004
- case for lenses (different types on request)
- full adjustable holder for keyboard and mouse D97.513
- TFT or LCD holder, VESA system TFT2006-188
- basic electrical equipment with transparency keyboard,
optional stainless steel control panel (BED001)
patient chair:
- black imitation leather seat with sliding and inclinable backrest
- armrest (one side collapsable) AL2006-171
- foot support single or double
Decors on
request!
Decors on
request!
Technical Data:
width:
height:
lenght:
working height:
weight:
nominal input voltage:
connected load:
low voltage:
class of unit:
class of protection:
protection unit:
1536mm (60,56in)
1864mm (73,49in)
1519mm (59,89in)
870mm (34,3in)
150-180kg (332-398,4lb)
230V/50Hz
6A
6VDC/12VDC
B
I (MPG 1)
IP 20
protection requirement:
DIN EN 60601-1-2
In terms of engineering design and construction type, this commercialized version of the MOTIVA examination
unit complies with the requirements under Medical Product Directive 93/42/EEC.
Realiability of devices:
Decors on
request!
DIN EN 60601-1
DIN EN 60601-1-1
EMV
DIN EN 60601-1-2
Decors on
request!