REAR
Transcription
INTERNATIONAL APPLICATION CATALOGUE NUMBER 28 JULY 2012 OME Features NITROCHARGER SPORT SHOCK ABSORBERS LARGE BORE 35MM TWIN TUBE DESIGN - Allows greater oil volume for cooling and sustained valving performance and strong 1.6mm outer tube construction protects the vital internal components from damage. LARGE 18MM HARDENED CHROME PISTON ROD Strong enough to handle any load or harsh conditions expected from your 4x4. TRIPLE LIP CHECK VALVE OIL SEAL – MK2 -The latest technology in oil seal design – physically larger with quantum improvements in durability, oil and gas retention with much greater resistance to heat so it keeps working under the harshest conditions. TEFLON IMPREGNATED LOW FRICTION ROD GUIDE The latest refinement in rod guide design further reduces heat build up and maintains performance. TEFLON INFUSED BRONZE ROD GUIDE SLIP RING - A new component that maintains consistent and uniform performance by providing a tight and uniform fit between the piston rod and rod guide. MULTI DEFLECTIVE DISC VALVING SYSTEM - A unique and new valving system that features multiple disc valving control at the base of the shock and on both sides of the piston rod. This allows the OME engineers more valving options for better ride quality and handling control. 35MM HIGH FLOW TEFLON BANDED PISTON - New low friction design has less restrictive oil flow through the piston, reduces heat build up and aeration of the oil that leads to fade. VEHICLE SPECIFIC VALVING - OME shock absorber’s performance stand head and shoulders over its competitors because many hours of OME engineering valving work have been put into each and every shock absorber to ensure our customers get the best ride and handling their vehicle can have. POLYETHYLENE DIRT SHIELD – Impact resistant, polyethylene dirt shield provides additional protection from stone chips and off road debris. NITROGEN GAS – Increases the temperature operating range and improves oil flow through the valving, ensuring optimum performance. SUPPLEMENTARY WELDS - For strength and reliability, all mounts have supplementary welds. NITROCHARGER SHOCK ABSORBERS GIANT 18MM CHROMED SHAFT - Indestructible for Australia’s rugged off roading. Induction hardened then hard chromed to a superfine finish. NITROGEN GAS - The gas pressure keeps the oil cohesive under all situations. TWIN TUBE DESIGN - 33% thicker outer tube insures that rocks do not damage internal operating components. This design also allows for a greater volume of oil which keeps shock cooler. 35MM SEVEN STAGE COMPRESSION VALVE - Delivers all the subtleties of compression rates for the best ride and handling. CHECK VALVE SEAL - The latest in seal technology, this shaft seal significantly improves gas retention whilst offering excellent longevity. GLACIER BUSH - A Teflon coated rod guide bush significantly reduces heat build up in the rod guide area, developed from the Emu’s off road racing programme. GIANT 35MM TEFLON BANDED PISTON - A new four stage coil sprung rebound valve system to control vehicle bounce. SUPPLEMENTARY WELDS - On all mounting eyes & pins for maximum shock absorber mount strength. STONEGUARD - Protects oil seal and piston rod against stone and dirt damage. COIL SPRINGS X5K MICRO-ALLOYED SPRING STEEL – New generation high strength spring steel grade designed to withstand higher operating stresses with superior resistance to sag and improved toughness and corrosion fatigue properties. SHOT PEENED – To reduce stress, which greatly enhances spring life. DOUBLE SCRAGGED – To eliminate spring sag. VARIABLE AND CONSTANT RATE - Designs used to obtain optimum ride comfort and load carrying capabilities. STEERING STABILISERS COIL SPRUNG 9 STAGE VALVING - For optimum performance. 35MM PISTON & BORE - Greater oil volume giving better damper performance. TWIN TUBE DESIGN - Protects the internal components against stone damage. STEEL STONEGUARD - Protects the piston rod against stone damage. FOAM CELL - Keeps the oil at the valving to prevent fade. ORIGINAL MOUNTS - All mounts are of similar design to original stabilisers for ease of fitment. LEAF SPRINGS FLAT AXLE SEAT AREA - Lowers spring stress whilst retaining spring free camber height. Unique to most OME springs. ANTI FRICTION INTER LEAF LINERS - Used where applicable to reduce friction between spring leaves giving better ride comfort and increased spring life. SHOT PEENED - On the tension side of all leaves to double spring life. DRAW TAPERED & DIAMOND CUT LEAVES - For reduced interleaf friction and improved load distribution in the load bearing area. GRAPHITE COATED - For further reduced friction. MILITARY WRAPPED - For extra safety (where fitment permits). LOOSE CLAMPED - For smooth & quiet operation. URETHANE BUSHES - LEAF SPRING PREMIUM GRADE - Not all bushes are the same - OME bushes are precision moulded in captive moulds to ensure exact tolerances for long bush life. SPLINES - Ensures the best fit by taking up irregularities in spring eyes. UNIQUE OME DESIGN - Clever lip seal and shoulder design prevents dirt penetrating between bush shoulder and shackle face. GREASABLE SHACKLES REDUCED WEAR - Greasable shackles reduce shackle pin deterioration, increase bush life, enables easy maintenance and improve ride and handling. ANTI INVERSION FACILITY - Built in feature on all LandCruiser greasable shackles. SERVICING - Simple & effective. WARRANTY: For a copy of ARB’s Warranty Policy, ARB Products: Warranty Against Defects, please visit the ARB website – www.arb.com.au NOTES CONTENTS PAGE GUIDE TO SELECTION ……………………….……………………………………………….… 4 NITROCHARGER SPORT SELECTION ……..……….……….……………………………… 5 NITROCHARGERS & STEERING STABILISER APPLICATIONS ……..……….……….… 9 COMPACT AWD - OME SPRING & SHOCK ABSORBER RANGE ……………………… 13 LTR REMOTE CANISTER SELECTION…...…...……………………………………………… 14 SUSPENSION APPLICATIONS CHRYSLER JEEP ……………………………...………………………………………………… FORD ……………………………………………………………………………….…...………… HOLDEN / ISUZU / GM ………………………………………………………………………… HUMMER …………………………………………………………….………….……………….. HYUNDAI …………………………………………………………….………….……………….. KIA ……………………………………………………………………………….………..……… LADA NIVA ……………………….………………………………………………………….…… LAND ROVER ………..……………………………………………………….……….………… MAZDA ……………………………………………………………………………..….…………… MITSUBISHI ………………………..………………………………………………….………… NISSAN ………………………………………………………………………….…….…………… SSANGYONG ……………………………………………………….…..…………….………… SUZUKI …………………………………………………………………………..…….………… TOYOTA …………………………………………………………………….………….………… VOLKSWAGEN …………………………………………………………………….………….… TECHNICAL SPECIFICATIONS SUSPENSION BUSH KIT SELECTION …..……....…………………………………………… DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS ………………………………… NUMERICAL SPRING & SHOCK BUSH APPLICATIONS ………………………………… OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS ………………………… SUSPENSION FITTING KITS ………………………………………………………………… ADDING OR REMOVING AN EXTRA LEAF ………...………………………………………… REPLACEMENT MAIN OR 2ND LEAF ………………………………………………………… REPLACEMENT CENTRE BOLTS ……………………………………………………….…… DAKAR SPRING SERVICE PARTS ……………………………………………………….…… U BOLTS …………………………………………………………………….…………..……… LEAF SPRING TRIM PACKERS ……………………………………………………………… CLIP LINER KITS FOR LEAF SPRINGS ……………………………………………………… INTER-LEAF LINER KIT FOR LEAF SPRINGS ……………………………………………… LEAF SPRING CENTRE BOLT SLEEVES …..………………………………………………… LEAF SPRING SPECIFICATIONS ……………………………….....…..……………………… COIL SPRING SPECIFICATIONS …..…..…..………………………………………………… NITROCHARGER SPORT SPECIFICATIONS …..…………………………………………… NITROCHARGER SPECIFICATIONS …..………………………………………………….… SHOCK ABSORBER MOUNT TYPE …………………………………………………………… TORSION BAR SPECIFICATIONS …………………………………………………………… STEERING STABILISER SPECIFICATIONS …..……..……………………………………… RECOMMENDED FITTING TIMES ……………………………………………………….….… 15 24 28 32 33 33 33 34 38 40 47 62 62 67 93 94 99 101 104 105 110 111 112 112 113 114 114 114 114 115 117 123 126 130 130 131 132 © ARB Corporation Limited, Old Man Emu Division P.O. Box 105 Kilsyth, Vic. 3137 Australia. All rights reserved. No part of this catalogue may be reproduced or copied in any form or by any means (graphic, electronic or mechanical, including photocopying, recording, taping or information systems) without the written permission of the publisher. OME NO.28 INT JULY 2012 GUIDE TO SELECTION Terminologies & Explanations Please note most suspension development has been carried out on Australian specification models. Therefore, some differences may exist between the same model in another country. Overseas customers will need to make allowances for these possible differences. Supplying all items shown on suspension selection charts will ensure the system can be fitted, however, there will be vehicles which will not require all items, eg. trimming kits, caster kits, all U bolts shown, etc. Actual individual vehicle requirements can only be determined when the suspension system is fitted. GVM - GROSS VEHICLE MASS: Set by the vehicle manufacturer and is determined by brake, axle, differential and tyre specifications. Exceeding GVM ratings can have legal and safety implications and is not recommended. LOAD RATING - FRONT: Weights shown are maximum permissible loads with regard to accessories fitted, eg. Bull bar, winch, dual battery, etc. LOAD RATING: The explanations below indicates the passenger and load weights that will provide optimum ride and handling. REAR: LIGHT LOAD: Full passenger load with luggage weights up to 150kg. MEDIUM LOAD: Full passenger load with luggage weight varying from 200kg to 350kg. CONSTANT LOAD: The minimum constant load shown on selection chart is required for optimum spring performance. Please note: These loads are approximate only. Refer to individual vehicle selection for load specifications. LIFT HEIGHT: Is shown as a guide only and equates to the amount of lift over the vehicle's original ride height. This y from vehicle to vehicle. amount can vary OE: Original Equipment, as supplied by the manufacturer of the vehicle. SHOCK ABSORBERS: Where two part numbers are given for the same application the part with the asterisk (*) indicates the shock absorber with the firmer ride. SPRING BUSH: OME polyurethane spring eye bushes on installation must only be greased in the bore and on the flange area and regularly thereafter with OME polyurethane grease. STEERING STABILISER: Designed as a larger capacity replacement for the OE part and incorporates 50/50 neutral valving. CASTER KIT: The OMECA77B, CALR1 and CALR2 kits consist of 4 eccentric bushes which are pressed into the leading arms of the vehicle. This will induce positive caster into the front geometry. LEAF SPRINGS: A & B springs can be used to compensate for uneven vehicle weight distribution. Springs marked "A" have a greater camber height than springs marked 'B'. 'A' type springs are generally fitted to the driver's side and 'B' springs to the passenger side. COIL SPRINGS: A & B springs are used to compensate for uneven vehicle weight distribution. 'A' type springs are generally higher in free high than the 'B' spring. Individual coil specifications are listed in the back of this publication. GEARBOX PACKER KIT: Designed to space down the gearbox cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. GREASABLE SHACKLES: Replacement for original shackles allow easy regular greasing of polyurethane spring eye bushes. TRIM PACKERS: The prime purpose of a trim packer is to correct slight vehicle leaning. VEHICLES WITH LEAF SPRINGS UNDER SLUNG: Trim packer when fitted will reduce suspension height. VEHICLES WITH LEAF SPRINGS OVER SLUNG: Trim packer when fitted will increase suspension height. VEHICLES WITH COIL SPRINGS: Polyurethane trim packer main purpose is to correct slight vehicle trimming problems and will increase ride height when fitted. Page 4 OME NO.28 INT JULY 2012 NITROCHARGER SPORT SELECTION SELECTION ADVICE Where there is a choice of part numbers it is important the right selection is made with consideration given to type of spring rates and customer applications. Firm Valving The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically developed to control the higher spring rates. The firmer valving will provide better control when cornering, while also preventing axle bounce over rough roads. If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads. Soft Valving Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly carry light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed manoeuvring can occur. A RECOMMENDATION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERS By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that the original springs are also ready for replacement. It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers to work a lot harder. Therefore, the life expectancy of the shock absorbers will be considerably shortened and, when loaded, ride and handling qualities will also be reduced. REMEMBER: A good set of shock absorbers will not overcome a bad set of springs. OME NITROCHARGER SPORT SHOCKS & STRUTS YEAR VEHICLE DESCRIPTION FRONT REAR 60092 STEERING STABILISERS CHRYSLER JEEP All 2008 on 2002 to 2007 1984 on 2006 on 1997 to 2006 1986 to 1996 Grand Cherokee ZJ Cherokee/Liberty KK All Models 9000911 9000911 60052 60066 *60047 / 60046 60098 60093 60069 60069 60053 60067 OMESD409 OMESD48 *60049 / 6004810 60099 OMESD409 OMESD40 60040 60040 60031 Under Development Under Development Under Development OMESD31 '86 on *90020 / 90019 *60102 / 60101 / 60023 600224 *60102 / 60101 / 60023 600224 60022 *60013 / 60012 60023 60023 *60015 / 60014 Rodeo/Isuzu Pick up - RA Models / Colorado / Dmax Rodeo/Isuzu Pick Up KB4, KBD4 & TFS Jackaroo/Trooper & Monterey (Isuzu Wagon) Jackaroo/Trooper Jackaroo/Trooper Frontera Wagon Frontera UT 60031 60031 60031 60031 60031 60031 60031 *60064 / 60032 *60064 / 60032 60074 *60063 / 600098 *60064 / 60032 Under Development Under Development H3 90001 60045 Terracan V6 Terracan Diesel 60040 60040 60060 60060 Cherokee/Liberty KJ ALL Models (OME Springs) Cherokee XJ - Petrol & Diesel Wrangler JK - All Models Wrangler TJ Wrangler YJ OMESD40 DAIHATSU 1992 to 1997 Feroza II F310 1988 to 1992 Feroza I F300 1993 on Rocky F78 Wide Track FORD 2011 on Ranger PX 2006 to 2011 Ranger PJ All Models 1985 to 2005 Courier/Ranger Pick Up 1987 to 1993 Raider Wagon All Maverick Wagon & Hard Top To 8/89 OMESD34 9/89 on OMESD36 HOLDEN/ISUZU/CHEVY 2003 on 7/81 to 2003 1992 to 2004 11/86 to 3/92 1982 to 10/86 99 to 6/2003 1995 to 1998 HUMMER 07/2007 on HYUNDAI 2001 on 2005 on Page 5 OME NO.28 INT JULY 2012 NITROCHARGER SPORT SELECTION OME NITROCHARGER SPORT SHOCKS & STRUTS YEAR VEHICLE DESCRIPTION FRONT REAR 60024 60037 60037 60037 *60025 / 60026 *60039 / 60038 *60039 / 60038 *60039 / 60038 *90020 / 90019 *60102 / 60101 / 60023 2006 to 2011 Mazda BT50 All Models 600224 *60102 / 60101 / 60023 1987 to 2006 B2600 Pick Up All Models 600224 60023 *90007 / 9000611 60040 60040 60051 *60033 / 60019 60041 *60036 / 60057 60056 60051 *60036 / 60057 9000811 60040 60040 *60075 / 60076 60059 *60036 / 60057 60036 60050 60058 STEERING STABILISERS LAND ROVER 1999 to 2004 1991 to 1999 To 5/1995 1984 on Discovery Series II (Not Suitable for Airbag Models) Discovery Series I Range Rover (Not Suitable for Airbag Models) Defender & County 90, 110 & 130 OMESD02 OMESD11 OMESD11 OMESD32 MAZDA 2011 on Mazda BT50 MITSUBISHI 4/2000 on 91 to 3/2000 91 to 3/2000 1989 to 5/91 Pajero/Montero NS, NM, NP & NT LWB & SWB Pajero/Montero (Coil Springs) NH, NJ, NK & NL Pajero/Montero (Leaf Springs) NH, NJ, NK & NL Pajero/Montero (Coil Springs) NF & NG To 4/1991 Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF & NG 2009 on 2000 to 2008 1998 to 2000 7/2006 on 10/96 to 6/06 1993 to 9/96 91 to 8/96 10/86 to 1993 To 1986 To 9/1986 Challenger/Montero Sport KH Challenger/Montero Sport (Coil Springs) Challenger/Montero Sport (Leaf Springs) Triton/L200 ML & MN All Models Triton/L200 MK Models Triton/L200 MJ Models Triton/L200 V6 (OE Springs) Triton/L200 (V6 & 4 Cylinder) ME, MF, MG, MH L200 MA, MB, MC & MD L300 Vans SA, SB, SC & SD 9000811 60040 60051 60051 60051 60051 60051 60057 60058 60058 60032 NISSAN 2/2000 on 1997 to 1/00 1997 on 1997 on To 8/1989 9/1989 on 1988 to 7/97 2005 on 1986 to 8/95 2005 on 10/2002 on 1/86 to 8/02 1/1986 on 1980 to 1985 1996 to 1999 Patrol Y61 (GU) SWB & Wagon Patrol Y61 (GU) Wagon & SWB Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear) Patrol Y61 (GU) Cab Chassis (All Coil Springs) Patrol Y60 (GQ) Wagon & SWB Patrol Y60 (GQ) Wagon, SWB & Cab Chassis Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs) Pathfinder R51 Pathfinder/Terrano WD21 Navara D40 Navara D22 Navara D21 & D22 Pick Up Navara D21 & D22 Pick Up 4x2 720 Ute & Cab Chassis Terrano II 4x4 (European Models) *60015 / 610143 *60015 / 610143 60054 OMESD01 OMESD11 OMESD11 OMESD34 OMESD36 OMESD22 9000311 600342 600212 600402 600402 60031 *60015 / 610143 *60015 / 61014 *60015 / 61014 60054 60016 *60064 / 60032 *60110 / 60017 60035 60035 Under Development *60064 / 60032 60058 60031 Under Development 9000311 60017 *60013 / 61012 *60013 / 61012 60055 *60013 / 61012 *60013 / 61012 *60013 / 61012 60068 9000311 60031 OMESD35 OMESD356 SSANGYONG To 2005 Musso, Sport Utility & Korando Models SUZUKI 2009 on Equator (US Market Only) TOYOTA 2007 on 3/1998 on 3/1998 on 4/90 to 1998 2009 on 2009 on 4/2003 to 09 7/96 to 10/02 LandCruiser 200 Series V8 LandCruiser 100 Series (IFS) LandCruiser 100 & 105 Series (Front Live Axle) LandCruiser 80 Series Prado 150 Series LWB Prado 150 Series SWB Prado 120 Series (Except TEMS/Grande Models) Prado 95 & KZJ90 Series 2007 on LandCruiser 78 & 79 Series V8 Diesel Model *91005 / 90017 *60001 / 60000 *60070 / 60018 *60070 / 60018 9001011 *90010 / 90016 9000011 90004 60008 Page 6 *61030 / 61029 *60003 / 600021 *60071 / 600201 *60071 / 600201 *60081 / 60080 *60080 / 60086 *60005 / 60004 *60027 / 60028 *60011 / 60010 / 60109 OMESD24 OMESD24 OMESD47 OME NO.28 INT JULY 2012 NITROCHARGER SPORT SELECTION OME NITROCHARGER SPORT SHOCKS & STRUTS YEAR VEHICLE DESCRIPTION STEERING STABILISERS FRONT REAR 60008 *60111 / 60011 / 60010 OMESD47 60008 *60011 / 600101 / 60109 OMESD24 TOYOTA (continued) 2007 on LandCruiser 76 Series Wagon - V8 1999 to 2006 LandCruiser 78 & 79 Series - 6 cylinder models 1985 to 1999 1985 on All All LandCruiser 75 Series LandCruiser 70, 73 & 74 Series LandCruiser HZJ71 & HJZ74 Series LandCruiser II Wagon *60063 / 60009 60009 60008 60089 1984 to 1990 Bundera RJ70 1986 to 3/90 1980 to 1986 All All 2010 on 2006 to 2010 2005 on 9/97 to 2004 9/83 to 8/97 1988 to 8/97 To 8/1983 2010 on 2003 to 2010 1996 to 2002 1990 to 1996 1986 to 1990 60094 LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm) LandCruiser 60 Series (Rear Lower Pin 16mm) LandCruiser 45 - 47 Series LandCruiser 40 - 42 Series SWB FJ Cruiser FJ Cruiser HiLux Vigo KUN26R, GGN25R HiLux Tiger LN172, LN167, KZN165, RZN174 & RZN169 (IFS) HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension) HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS) HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm) 4 Runner (USA) 4 Runner (USA) 4 Runner Front & Rear Coil Springs (USA) 4 Runner (IFS) Front Torsion Bar/Rear Coil Springs 4 Runner (IFS) Rear Leaf Springs *60063 / 60009 *60063 / 60009 60097 60097 9001011 9000011 *9000211/90011 60042 60061 60072 60061 *60011 / 60010 60062 60044 60090 1 60096 60095 RHS LHS *60065 / 60062 *60064 / 60032 *600064 / 60032 *600064 / 60032 *60081 / 60080 60004 *60007 / 60006 60044 600437 LHS RHS *60065 / 60062 *60065 / 60062 9001011 9000011 90004 60072 60072 *60064 / 600321 *60081 / 600801 *60005 / 60004 60027 60073 60065 *90013 / 90012 *60083 / 60082 OMESD24 OMESD24 OMESD24 OMESD24 OMESD24 OMESD23 OMESD23 OMESD33 OMESD21 OMESD21 OMESD33 OMESD33 VOLKSWAGEN 2010 on Amarok NOTES: *first part number has firmer valving. 1. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. OME661 (suit 4 Runner 2010 On, LandCruiser 80 & 100 Series only) OME660 (all other models). 2. It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber. 3. FK18 rear sway bar extension bracket for LWB Models and FK24 for SWB Models are mandatory fitments with Nitrochargers to prevent damage to sway bar due to increased wheel droop. 4. FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on models manufactured in Thailand. 5. OME Struts can only be installed with OME Coil Springs. No top mounting bushes supplied, re-use OE bushes. 6. OMESD35 will suit D21 models only. 7. 60043 is 20mm longer and must only be installed to right hand side. 8. OMEB11 bush kit is required to convert lower 19mm bush to 16mm ID. 9. OMESD40 will only fit left hand drive models. 10. FK16 20mm bump stop spacer kit is a mandatory fitment. 11. No top mounting bushes supplied, re-use OE bushes. Note: Replacement Nitrocharger Sport Dirt Shields: 384006170, 384006210, 384006250 & 384006290. The last 3 numbers of the part number indicates the length of the dirt shield. The replacement Dirt Shield Part Number for Individual Sport Shocks are listed in the Nitrocharger Sport Specifications on page 123 to 125. Page 7 OME NO.28 INT JULY 2012 NITROCHARGER SPORT SELECTION NITROCHARGER SPORT L SERIES Front Open (mm) Closed (mm) Rear Jeep JK 60066L 693 404 60067L 706 422 Jeep XJ 60052L 678 392 60053L 622 366 Jeep TJ 60047L 678 392 60049L 622 366 Patrol Y60, Y61 60013L 555 322 60015L 716 426 Vehicle Open Closed (mm) (mm) LandCruiser 80, 100 60070L 667 381 60071L 673 387 Discovery I to 99 60037L 593 349 60039L 600 366 Discovery II to 04 60024L 627 388 60025L 627 388 Defender 90, 110, 130 60037L 593 349 60039L 600 366 60037L 593 349 660039L 600 366 Range Rover to 5/95 Non Airbag Models Remarks Refer to page 123 to 125 of the OME International Application Catalogue for open and closed lengths of equivalent standard Nitrocharger Sport models. Warranty Implications The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent any future misunderstanding. Page 8 OME NO.28 INT JULY 2012 NITROCHARGERS & STEERING STABILISERS SHOCK ABSORBER SELECTION ADVICE Where there is a choice of part numbers it is important the right selection is made with consideration given to type of spring rates and customer applications. Firm Valving The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically developed to control the higher spring rates. The firmer valving will provide better control when cornering, while also preventing axle bounce over rough roads. If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads. Soft Valving Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly carry light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed manoeuvring can occur. A CAUTION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERS By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that the original springs are also ready for replacement. It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers to work a lot harder. Therefore, the life expectancy of the shock absorbers will be considerably shortened and when loaded ride and handling qualities will also be reduced. REMEMBER: A good set of shock absorbers will not overcome a bad set of springs. OME NITROCHARGERS, STRUTS & CARTRIDGES YEAR VEHICLE DESCRIPTION FRONT REAR N188S N190 N132 N132 N190 N117 N40 N36 STEERING STABILISERS CHRYSLER JEEP 2006 to 2010 2008 on 2002 to 2007 2006 to 2010 1998 to 2005 1992 to 1998 1984 on To 1986 1974 to 1986 To 1986 2006 on 1997 to 2006 1986 to 1996 Comander XK Cherokee/Liberty KK ALL Models Cherokee/Liberty KJ ALL Models (OME Springs) Grand Cherokee WH & WK Grand Cherokee WJ & WG Grand Cherokee ZJ - 6 cylinder & V8 engines Cherokee XJ - Petrol & Diesel Cherokee Wagon & J10 Ute (Full Size) Cherokee W10 & J20 Utes and Cab Chassis CJ5, 6, 7, & 8 Wrangler JK - All Models NS13118 *NS131/NS13018 N188S18 N11112 *N39/N39C N35 OMESD4011 OMESD4011 N561 N43 *N56/N54 *N198/N212 OMESD48 Wrangler TJ Wrangler YJ N411 N411 *N41/N811 *N196/N211 *N66/N66C N33 N675 N34 OMESD4011 OMESD4011 Feroza II F310 Feroza I F300 Rocky F78 Wide Track Rocky F70, F75, F80 & F85 Hard Top with Leaf Springs Rocky F77 & 78 Tray Top with Leaf Springs Scat Hard Top *N18/N57G *N18/N57G N26F OME027 OME027 N41/N81 *N49/N96 N43 N33 N43 *N48/N97 *N48/N97 OMESD31 '86 on OMESD31 '86 on 2006 to 2011 1985 to 2005 To 2001 2005 to 2008 1999 to 2004 1987 to 1993 All Ranger PJ All Models Courier/Ranger 1 Tonne Explorer 4x4 Only Ford F250 & F350 Ford F250 & F350 Raider Wagon Maverick Wagon & Hard Top N194/N1878 N518 N16 N195 N178 N51 *N21/N23F N189 N53 N17 N179 All 1981 to 1989 1981 to 1989 1981 to 1989 1970 to 1980 1970 to 1979 Maverick Ute & Cab Chassis Bronco (Single I Beam Front End) Bronco (Dual I Beam Front End) F100 4x4 & 4x2 (Single I Beam) F100 4x4 & 4x2 (Twin I Beam) F250 4x4 & 4x2 (Twin I Beam) DAIHATSU 1992 to 1997 1988 to 1992 1993 on 1984 to 8/93 1984 to 1993 All FORD N28 N179+N18010 N53 *N29/N22F N25 To 8/89 OMESD34 9/89 on OMESD36 OMESD22 N423 N423 N423 N55 N55 Page 9 OME NO.28 INT JULY 2012 NITROCHARGERS & STEERING STABILISERS OME NITROCHARGERS, STRUTS & CARTRIDGES YEAR VEHICLE DESCRIPTION FRONT REAR N65 *N42/N89 N150 *N65/N26F N65 *N65/N26F *N65/N26F *N65/N26F *N65/N26F OME025 OME015 *N42/N89 *N42/N89 N15 STEERING STABILISERS HOLDEN/ISUZU/CHEVY 2003 on Rodeo/Isuzu Pick up -RA & RA7 Models/Colorado Diesel/Dmax 2003 on 7/81 to 2003 1992 to 2004 11/86 to 3/92 1982 to 10/86 99 to 6/2003 1995 to 1998 1985 to 1987 1985 to 1987 Rodeo/Isuzu Pick up - RA Models/Colorado V6 Rodeo/Isuzu Pick Up KB4, KBD4 & TFS Jackaroo/Trooper & Monterey (Isuzu Wagon) Jackaroo/Trooper Jackaroo/Trooper Frontera Wagon Frontera 2 & 4 Door UT Drover QB (OE Springs) Drover QB (OME Springs Fitted) N8813 *N42/N89 N102 N15 OME023 OME013 OMESD30 OMESD30 KIA 2006 to 2009 Sorento All BL Models 02 to Late 06 Sorento All Models N147S + N148S18 N147S + N148S18 N205 N149 *N107/N107C *N115/N45F *N108/N108C *N44/N46/N27 OMESD02 OMESD11 N17616 *N115/N45F *N115/N45F N78 N78 N17716 *N44/N46/N27 *N44/N46/N27 N69 N90 OMESD11 OMESD32 OMESD11 OMESD11 *N41/N811 *N41/N811 *N194/N1878 N518 N189 N53 *N203S/N129S18 *N203S/N129S/ N109S18 N18 N18 N60G *N204/N152 N64 *N56/N54 See Sport Selection N60G *N56/N54 LAND ROVER 1999 to 2004 1991 to 1999 1994 to 2001 To 5/1995 1984 on To 1984 To 1984 Discovery Series II (Not Suitable for Air Bag Models) Discovery Series I Range Rover MK II P38A Models Range Rover (Not Suitable for Air Bag Models) Defender & County 90, 110 & 130 Land Rover Series I, II & III (80" & 109") Land Rover Series II & III (88" SWB) MAHINDRA 1990 to 1993 Bushranger & Stockman CJ340 MAZDA 06 to 2011 Mazda BT50 All Models 1987 to 2006 B2600 Pick Up All Models MITSUBISHI 4/2000 on Pajero/Montero NS, NM, NP & NT (3.2 Diesel) 4/2000 on Pajero/Montero NS, NM, NP & NT Wagon & Hard Top (V6) 1991 to 3/00 1991 to 3/00 1989 to 5/91 Pajero/Montero (Coil Springs) NH, NJ, NK & NL Pajero/Montero (Leaf Springs) NH, NJ, NK & NL Pajero/Montero (Coil Springs) NF & NG To 4/1991 Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF & NG 2009 on 2000 to 2008 1998 to 2000 7/2006 on 10/96 to 6/06 1991 to 8/96 1991 to 8/96 1986 to 8/96 To 1986 To 9/1986 18 Challenger/Montero Sport KH Challenger/Montero Sport (Coil Springs) Challenger/Montero Sport (Leaf Springs) Triton/L200 ML & MN All Models Triton/L200 MK All Models Triton/L200 V6 (OE Springs) Triton/L200 (V6) MH & MJ Triton/L200 (4 Cylinder) ME, MF, MG, MH & MJ L200 MA, MB, MC & MD L300 Vans SA, SB, SC & SD N186S N57G N57G N186S18 *N18/N57G N60G N60G N60G N60G N60G *N204/N152 N116 N116 *N56/N54 *N59/N54 N30E N30E N30 N30 N30 N89 NISSAN 2/2000 on 1997 to 1/00 1997 on 1997 on To 8/1989 9/1989 on 1988 to 7/97 8/83 to 1988 1980 to 7/83 1967 to 1979 2005 on 2/99 to t 2005 Patrol Y61 (GU) SWB & Wagon Patrol Y61 (GU) Wagon & SWB Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear) Patrol Y61 (GU) Cab Chassis (All Coil Springs) Patrol Y60 (GQ) Wagon & SWB Patrol Y60 (GQ) Wagon, SWB & Cab Chassis Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs) Patrol MQ Wagon, SWB, Ute & Cab Chassis Patrol MQ Wagon, SWB, Ute & Cab Chassis Patrol 60 & G60 Series Pathfinder R51 Pathfinder P thfi d R50 Page 10 *N19/N19C *N19/N19C *N19/N19C *N19/N19C *N21/N23F *N21/N23F N28 N49 *N47/N96 N49 N183S18 N145S/N146S *N29/N29C6 *N29/N29C6 N25 OMESD01 OMESD11 *N29/N29C6 *N29/N22F *N29/N22F N25 *N48/N97 *N48/N97 N49 N184 N104 OMESD11 OMESD34 OMESD36 OMESD22 OMESD22 OMESD22 OMESD22 OME NO.28 INT JULY 2012 NITROCHARGERS & STEERING STABILISERS OME NITROCHARGERS, STRUTS & CARTRIDGES YEAR VEHICLE DESCRIPTION FRONT REAR N145S/N146S N26F N61 *N42/N89 N185 *N59/N56 *N59/N56 *N41/N81 STEERING STABILISERS NISSAN (continued) 1996 to 1/99 1986 to 8/95 2005 on 10/2002 on 1/86 to 8/02 1/1986 on 1996 to 2005 1980 to 1985 Pathfinder R50 Pathfinder/Terrano WD21 Navara D40 Navara D22 Navara D21 & D22 Pick Up Navara D21 & D22 Pick Up 4x2 Terrano II 4x4 (European Models) (OE Springs) 720 Ute & Cab Chassis N183S18 N1514 N584 *N18/N57G4 *N65/N26F *N18/N57G4 N30 *N42/N89 N65 N118 N183S18 N103S19 N217S + N218S N103S N103S N103S OME028 OME028 OME034 OME015 OME025 OME015 OME025 OME015 OME015 N185 N105 OME036 N105 N105 N32 OMESD3514 OMESD3514 SSANGYONG To 2005 Musso, Sport Utility & Korando Models SUZUKI 2009 on 2001 to 2005 8/2005 on 1995 to 2005 7/88 to 2005 7/88 to 2005 All All To 2004 1982 to 1995 1988 to 1996 1978 to 12/81 1978 to 12/81 1978 to 12/81 1974 to 12/81 Equator (US Market Only) XL7 Wagon V6 Grand Vitara Wagon Models Grand Vitara 4 & 6 Cylinder Vitara TA01 & TD01 & Wagon Vitara TA012 TD01 SWB Jimny SN413 (OE Springs) Jimny SN413 (OME Springs) Santana Samurai All Models Sierra SJ410 & SJ413 Ute MG410 / WT1000cc (OME Springs) Sierra SJ70, SJ71, SJ413, MG410 / WT1300cc (OME Springs) LJ80 & LJ80V SWB (OME Springs) LJ80 & LJ80V SWB (OE Springs) LJ80 Ute (OME Springs) 540, LJ10, LJ20 & LJ50 (OME Springs) OME03017 OME029 OME035 OME013 OME013 N43 N/A OME013 OME013 OMESD3015 OMESD3015 OMESD3015 OMESD3015 OMESD3016 OMESD3015 TOYOTA 2007 on 3/1998 on 3/1998 on 4/90 to 1998 LandCruiser 200 Series V8 LandCruiser 100 Series (IFS) LandCruiser 100 & 105 Series (Front Live Axle) LandCruiser 80 Series 4/2003 to 09 Prado 120 Series (Except TEMS/Grande Models) 7/96 to 10/02 2007 on 2007 on 1999 to 2006 1985 to 1999 All 1984 to 1990 1985 on All 1986 to 3/90 1980 to 1986 1980 to 1986 1986 to 3/90 To 11/1980 To 12/1984 To 12/1984 To 12/1984 2005 on 2006 to 2010 2005 on Prado 95 & KZJ90 Series LandCruiser 78 & 79 Series V8 Diesel Model LandCruiser 76 Series Wagon - V8 LandCruiser 78 & 79 Series - 6 cylinder models LandCruiser 75 Series LandCruiser II LJ/RJ70, LJ/KZJ71 & LJ/KZJ78 Models LandCruiser Bundera, SWB, LJ70 & RJ70 Series LandCruiser 70,73 & 74 Series LandCruiser HZJ71 & HJZ74 Series LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm) LandCruiser 60 Series (Rear Lower Pin 16mm) LandCruiser 60 Series (OE Springs) LandCruiser 60 Series (OE Springs) LandCruiser FJ55 LandCruiser 45 & 47 Series 9/97 to 2004 9/83 to 8/97 9/83 to 8/97 1988 to 8/97 1988 to 8/97 T 8/1983 To LandCruiser BJ, FJ & HJ 40 & 42 Series All Models LandCruiser BJ, FJ & HJ 40 & 42 Series All Models (OE Springs) Fortuner FJ Cruiser HiLux Vigo KUN26R, GGN25R HiLux Tiger LN172, LN167, KZN 165, RZN174 & RZN169 (IFS) HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension) HiLux LN65, YN65, LN106 & RN105 (OE Springs) HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS) HiLux/4 Runner LN107, RN105, RN110 & LN111(IFS)(OE Springs) HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm) Page 11 N208S9 *N199/N133/N100 *N73/N70 *N73/N70 *N201S/N140S/ N139S18 *N91S/N91SC *N181/N106 *N181/N106 N106 *N50/N88/N92 N77 N114 *N50/N88/N92 N106 *N50/N88/N92 *N50/N88/N92 N50 N50 N43 *N41/N81 *N41/N81 N41 *N167S/N166S18 N140S18 *N167S/N166S19 *N87/N80 *N93/N84 N84 N98 N98 *N93/N84 *N210/N209 *N200/N101 *N74E/N71E2 *N74E/N71E2 OMESD24 OMESD24 *N202/N142/N141 *N86 *N197/N75E *N197/N75E *N75F/N75E2 *N75F/N75E2 N79 N112&N113 *N85/N94 N68 *N90/N85/N94 *N42/N89/N95 N42 N90 N42 *N42/N89 *N89/N95 N42 N191 N141 *N169/N168 *N75&N75E/ N68&N68E7 *N85/N94 *N90/N85 *N85/N94 *N90/N85 *N89/N952 OMESD47 OMESD47 OMESD24 OMESD24 OMESD24 OMESD24 OMESD24 OMESD24 OMESD24 OMESD24 OMESD24 OMESD23 OMESD23 OMESD23 OMESD33 OMESD21 OMESD21 OMESD33 OMESD21 OME NO.28 INT JULY 2012 NITROCHARGERS & STEERING STABILISERS OME NITROCHARGERS, STRUTS & CARTRIDGES YEAR VEHICLE DESCRIPTION FRONT REAR N84 *N42/N89 N142 N86 N72F STEERING STABILISERS TOYOTA (continued) To 8/1983 2003 on 1996 to 2002 1990 to 1996 1986 to 1990 1986 to 1990 1984 to 1986 1984 to 1986 1982 to 1983 1997 to 2003 2005 to 2010 To 2004 2007 on HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm) (OE Springs) 4 Runner (USA) 4 Runner Front & Rear Coil Springs (USA) 4 Runner (IFS) Front Torsion Bar/Rear Coil Springs 4 Runner (IFS) Rear Leaf Springs (OE Springs) 4 Runner (IFS) Rear Leaf Springs 4 Runner (Front Live Axle) (OE Springs) 4 Runner (Front Live Axle) Blizzard Kijang (4th Gen.) Tacoma V6 Tacoma V6 Tundra N140S18 *N91S/N91SC N98 N98 N98 N84 N93/N84 *N41/N81 N128 N85/N94 N85/N94 N192S18 N90/N85 N85/N94 N48 N56 N182 N85 N193 N38S N37 N140S18 *N91S/N91SC OMESD21 OMESD33 OMESD33 OMESD33 OMESD21 OMESD21 VOLKSWAGEN 1985 to 1990 Syncro 4x4 NOTES: *first part number has firmer valving. 1. 1983 and on wide track CJ Jeeps require bush kit OMEB27 for the front lower mount and all Cherokee wagons and Mahindra lower front and rear mounts. 2. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. OME661 (suit LandCruiser 80 & 100 Series only) OME660 (all other models). 3. 1981 on F100 and Bronco require bush kit OMEB27 on bottom rear mount. 4. It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber. 5. FK16 20mm bump stop spacer kit mandatory fitment. g to prevent p damage g 66. FK18 rear swayy bar extension bracket for LWB models and FK24 for SWB models are mandatoryy fitment with Nitrochargers to sway bar due to increased wheel droop. 7. N75E and N68E are 20mm longer and must only be installed to right hand side. 8. FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on models manufactured in Thailand. 9. N208S can only be installed with OME Coil Springs. No top mounting bushes supplied, re-use OE bushes. 10. N179 suits models with single rear shock set up. Models with twin rear shocks require N179 fitment rear of axle, N180 front of axle, also fitment of OME660 stone shields are recommended on the N180. 11. OMESD40 will only fit left hand drive models. 12. To obtain maximum ride quality improvement it is recommended that an OME replacement stabiliser bar (OMESTAB1) be fitted. 13. OMEB11 bush kit is required to convert lower 19mm bush to 16mm ID. 14. OMESD35 will suit D21 models only. 15. Only suitable for models equipped with original steering damper. 16. Shocks are the same length as OE. 17. OME030 is shorter than OME029 and must be used with OE coils to ensure coils remain entrapped. 18. No top mounting bushes supplied, re-use OE bushes. 19. FK28 Bump Stop Spacer Kit is a mandatory fitment with N103S Struts. Note: Replacement dust boot part numbers: Nitrocharger OME412422 - Small Replacement dust boot part numbers: Nitrocharger OME512422 - Large Page 12 OME NO.28 INT JULY 2012 COMPACT AWD - OME SPRING & SHOCK ABSORBER LIFT F/R (mm) FRONT Terios J100 J102 20/20 2531 2532 Escape BA ZA AB Territory SX SY AWD (4WD) 30/30 20/30 2904 2533 2905 2534 Captiva, Antara - V6 (3.2) & Diesel 20/30 2529 2530 CRV CRV MY 2002 MY 2005 CRV RD 20/20 2535 2 -/20 CANNOT LIFT 30/30 2797 Santa Fe CM V6 (2.7) & Diesel Santa Fe OME Front - Cartridge, Rear - OME Gas 20/30 10/20 Sportage V6 & Diesel KM Models Sportage JA MY02 MY03 - V6 20/20 20/30 YEAR VEHICLE DESCRIPTION DAIHATSU 97 to 2006 UNIT PRICE REAR UNIT PRICE FORD To 06/2006 04 to 10/2007 GM / OPEL 2006 on HONDA 01/2007 on 12/01 to 01/07 10/97 to 11/01 2536 2538 2798 HYUNDAI 05/06 to 8/08 2000 to 2005 NC1601 2528 2908 OME033 2525 2523 2526 2524 2527 2907 KIA 2005 on 1997 to 2003 LAND ROVER 11/00 to 1/04 To 10/2000 To 10/2000 10/20 10/20 RX-330 RX 330 4WD MCU38R MY05 - V6 20/30 2509 2510 Tribute YU MY03 MY04 30/30 2904 2905 X-Trail Petrol X-Trail Diesel X-Trail: Front - Petrol - OME506, Diesel - OME507 OME Strut to Suit OME Springs 25/25 25/25 20/30 2511 2513 2506 / 2507 N213S+N214S 2512 2512 2508 N215S+N216S Forester MY03 MY04 MY05 Outback 4th Gen MY04 MY05 MY06 4Cyl Outback 4th Gen MY04 MY05 MY06 6Cyl 20/20 20/20 20/20 2519 2516 2517 2520 2518 2518 Kluger / Highlander MCU20R - V6 Rav 4 LWB ACA33R - 4 Cylinder Rav 4 SWB & LWB ACA20R ACA21R - Diesel Rav 4 SWB & LWB ACA20R ACA21R - Petrol OME Struts / Gas Shocks to Suit OME Springs Rav 4 LWB SXA11R MY98 MY99 - Petrol OME Struts / Gas Shocks to Suit OME Springs Rav 4 SWB SXA11R MY98 MY99 - Petrol OME Struts / Gas Shocks to Suit OME Springs 20/20 30/30 40/40 40/40 2509 2539 2799 2793 No longer Available 25/25 2793 No longer Available 25/25 2793 No longer Available 10/20 2502 2504 No longer Available 2503 2505 Freelander V6 & 2Ltr Diesel DOHC - Wagon Freelander 4 Cylinder Petrol Wagon OME Cartridge to Suit OME Springs Freelander V6 & 2Ltr Diesel DOHC OME Cartridge to Suit OME Springs 2500 No longer Available NC1381 2501 NC1381 LEXUS 2003 on MAZDA To 06/2006 NISSAN 2007 on 01 to 10/2006 SUBARU 7/02 to 2005 9/03 to 2006 9/03 to 2006 TOYOTA 03 to 04/2007 01/2006 on 07/00 to 08/05 07/00 to 08/05 To 2000 To 2000 2510 2540 2795 2795 OME031 2794 OME031 2796 OME031 NOTES: 1. Fitting instructions available on the Trade Resources website, www. Sellarb.com.au 2. Check for LH wound spring. Page 13 OME NO.28 INT JULY 2012 LTR REMOTE CANISTERS LTR SHOCKS YEAR VEHICLE DESCRIPTION LAND ROVER 1991 to 1999 Discovery Series I Defender & County 90, 110 & 130 1984 on FRONT REAR LTR04F R&L LTR05F LTR05R R&L4 LTR07F LTR07F LTR07F LTR02F LTR02F LTR07R1 LTR07R1 LTR07R1 LTR02R LTR02R LTR06F LTR01F LTR01F LTR09F LTR08FL/FR LTR06R R&L2 LTR03R R&L2 LTR01R R&L2 LTR09R R&L LTR04R NISSAN 2/2000 on 97 to 1/2000 1997 on To 8/1989 9/1989 on Patrol Y61 (GU) Series II SWB & Wagon Patrol Y61 (GU) Series I Wagon & SWB Patrol Y61 (GU) Cab Chassis (All Coil Springs) Patrol Y60 (GQ) Wagon & SWB Patrol Y60 (GQ) Wagon, SWB & Cab Chassis TOYOTA 3/1998 on 3/1998 on 4/90 to 1998 1999 to 2006 9/97 to 2004 LandCruiser 100 Series (IFS) LandCruiser 105 Series (Front Live Axle) LandCruiser 80 Series LandCruiser 78 & 79 Series (6 cylinder models only) HiLux LN172, LN167, KZN165, RZN174 & RZN169 (IFS) LTR08RL/RR3 NOTES: 1. FK18 rear sway bar extension bracket for all models without detachable sway bar and FK24 for all models with detachable sway bar are mandatory fitment with Nitrochargers to prevent damage to sway bar due to increased wheel droop. 2. Fitment of a rear stone flap kit is mandatory to the control arms to prevent stone damage to the shock absorber. OME662 suits models with 34mm diameter. OME664 suits models with 43mm diameter. 3. Fitment of OME663 stone flap kit is mandatory to prevent damage to piston rod from stone peppering. 4. LTR05R suits early model defenders where the fuel pump is not mounted inside of the right rear mud guard. Note: Replacement dust boot part numbers: LTR OME512422 - Large Replacement dust boot part numbers: LTR OME412422 - Small GASSING REMOTE CANISTER SHOCK ABSORBERS The only recommended gas to use in LTR shock absorbers is Nitrogen. A Schrader valve, part number 2755, from Schrader Automotive Inc is required to guarantee correct pressure is reached. When using a Schrader valve to gas your LTR Shock absorber first set the pressure gauge to the required pressure. Attach the Schrader valve to the air fitting at the end of the remote canister. Gas the canister until the shock absorber shaft is fully extended, hold gas pressure for 30 seconds, release Schrader valve and remove. Note: This can be done for you by your Old Man Emu Stockist. Important: Gassing of your LTR shock absorber should be carried out before fitment to the vehicle. If LTRs are already fitted the vehicle's suspension should be at full extension before gassing. MINIMUM/MAXIMUM GAS PRESSURE On Road/Off Road 40-80psi (2.8 - 5.5 BAR) Competition 80-100psi (5.5 - 6.9 BAR) An increase in gas pressure firms up ride quality but will not alter ride height MAINTENANCE The following checks need to be carried out as part of regular vehicle maintenance. To ensure maximum cooling of your LTR shock absorber inspect the shock absorber body and canister for any mud and debris build up and clean if necessary Check that the polyurethane boot is securely fastened in place and that it is not damaged. If the boot is found to be detached thoroughly clean the shock absorber shaft and inside the boot before reattaching it. Ensure all polyurethane bushes, locating washers and nuts are in good condition and securely fastened. To ensure maximum shock absorber performance check gas pressure every 20,000km Page 14 OME NO.28 INT JULY 2012 CHRYSLER JEEP JEEP COMMANDER XK 2006 TO 2010 FRONT Estimated Lift: 50mm V8 PETROL & DIESEL PART NUMBER QTY SPRING: TO 40 KGS STRUT 2990 N188S 1 SPRING: 41 TO 100 KGS STRUT 2991 N188S 1 REAR Estimated Lift: 55mm UNIT PRICE $ 1 2 1 2 ALL MODELS PART NUMBER QTY SPRING: LIGHT LOAD NITROCHARGER 2992 N190 SPRING: MEDIUM LOAD NITROCHARGER 2993 N190 1 2 1 2 UNIT PRICE $ REMARKS: 1 No top mounting bushes supplied, re-use OE bushes. JEEP GRAND CHEROKEE WH / WK TO 2010 FRONT Estimated Lift: 50mm V8 PETROL & DIESEL PART NUMBER QTY SPRING: TO 40 KGS STRUT 2990 N188S 1 SPRING: 41 TO 100 KGS STRUT 2991 N188S 1 REAR Estimated Lift: 55mm UNIT PRICE $ 1 2 1 2 ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER 2992 N190 SPRING: HEAVY LOAD NITROCHARGER 2993 N190 1 2 1 2 UNIT PRICE $ REMARKS: 1 No top mounting bushes supplied, re-use OE bushes. Page 15 OME NO.28 INT JULY 2012 CHRYSLER JEEP JEEP GRAND CHEROKEE WJ & WG FRONT Estimated Lift: 40mm SPRING: TO 40 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 41 TO 90 KGS NITROCHARGER SPORT NITROCHARGER TRIM PACKER STABILISER BAR REAR Estimated Lift: 40mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: HEAVY LOAD NITROCHARGER SPORT NITROCHARGER TRIM PACKER V6 & V8 PETROL ENGINES PART NUMBER QTY 2935 60087 N111 1 2 2 1 2 2 2936 60087 N111 OMEWJPF10 OMESTAB1 1 DIESEL ENGINE UNIT PRICE $ PART NUMBER QTY 2936 60087 N111 1 2 2 1 2 2 2936 60087 N111 OMEWJPF10 - 1 2 UNIT PRICE $ 2 1 - ALL MODELS PART NUMBER QTY 2944 60088 N117 1 2 2 1 2 2 2945 60088 N117 OMEWTJPR10 UNIT PRICE $ REMARKS: 1 OMESTAB1 is bar ride i a lighter li ht rate t OME replacement l t stabiliser t bili b which hi h is i a recommended d d fitment fit t so maximum i id quality improvement can be obtained. (OMESTAB1 does not suit 2.7 Diesel Models). 2 Add 1 only OMEWJPF10 Trim Packer to increase ride height for vehicles with bull bar and winch. JEEP GRAND CHEROKEE ZJ FRONT Estimated Lift: 20 - 25mm SPRING: TO 40 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 41 TO 90 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER COIL PACKER REAR Estimated Lift: 20 - 25mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 100 KGS NITROCHARGER SPORT NITROCHARGER COIL PACKER 6 CYLINDER & V8 ENGINES PART NUMBER 2931 2934 60092 *N39 / N39C QTY 1 UNIT PRICE $ 1 2 2 2930 2934 60092 N39 OMESD40 OMEJGF10 1 1 2 2 2 1 REMARKS: 1 2931 and 2930 suit 6 cylinder Models. 2934 suits V8 Models. 2 OMESD40 will only fit left hand drive Models. ALL MODELS PART NUMBER QTY 2940 60093 N40 1 2 2 1 2 2 2943 60093 N40 OMEJGR10 Page 16 UNIT PRICE $ OME NO.28 INT JULY 2012 CHRYSLER JEEP JEEP CHEROKEE XJ WAGON 1984 ON FRONT PETROL & DIESEL ENGINES Estimated Lift: 35 - 45mm PART NUMBER SPRING: NITROCHARGER SPORT NITROCHARGER TRIM PACKER STEERING DAMPER 2930 60052 N35 OMEJGF10 OMESD40 REAR QTY 1 3 2 3 1 5 PART NUMBER SPRING: LIGHT LOAD NITROCHARGER SPORT NITROCHARGER CS034RA / B 60053 N36 SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT CS035RA / B 60053 N36 OE OMEU60 OMEU57 XJGK01 D22XL UCB8 U BOLTS GEARBOX PACKER KIT EXTRA LEAF CENTRE BOLT XJ Models fitted with a 3 bolt engine exhaust pipe flange, can experience a clearance problem with the tail shaft, when suspension is under full deflection. Fitment of an adjustable front panhard rod or a change to the smaller 2 bolt flange will provide the required clearance. UNIT PRICE $ ALL MODELS Estimated Lift: 50mm Warning: QTY 2 REMARKS: UNIT PRICE $ 1+1 2 2 2 1 1+1 2 1 4 4 1 2 2 OMEU60 suits Dana 35 type differential - Australian Models. OMEU57 suits AMC 8 1/4 type differential. Trimming requirement greater than 10mm use A/A fitment. Where near level rake is desired B/B fitment should be used. D22XL extra leaf can be fitted to CS034RA/B and CS035RA/B for heavier constant load carrying ability. NB: Models fitted with OE Up Country Suspension Pack will only be raised by 20mm. 3 OMEJGF10 front coil packer can be used for trimming or extra lift purposes, using no more than 1 packer packer. 4 Fit XJGK01 Gearbox Packer Kit should a driveline vibration occur. 5 OMESD40 will only fit left hand drive Models. JEEP CHEROKEE/LIBERTY KK FRONT Estimated Lift: 30 - 40mm V6 3.7L PETROL ENGINE 1 PART NUMBER QTY SPRING: TO 50 KGS STRUT - SPORT STRUT 2926 90009 NS131 1 SPRING: 51 TO 100 KGS STRUT - SPORT STRUT 2927 90009 NS131 REAR Estimated Lift: 40mm 2 2.8 CRD DIESEL ENGINE UNIT PRICE $ 2 2 ALL MODELS QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2730 60069 N132 1 SPRING: CONSTANT 100 KGS NITROCHARGER SPORT NITROCHARGER 2731 60069 N132 1 2 QTY 2927 90009 NS131 1 2790 90009 NS131 1 PART NUMBER PART NUMBER 2 UNIT PRICE $ 2 1 2 2 REMARKS: UNIT PRICE $ 1 Due to varying OE ride heights, some KK Models may only achieve a 20mm lift. 2 No top mounting bushes supplied, re-use OE bushes. 2 Page 17 OME NO.28 INT JULY 2012 CHRYSLER JEEP JEEP CHEROKEE/LIBERTY KJ FRONT Estimated Lift: 30 - 40mm PETROL ENGINE 1 PART NUMBER QTY SPRING: NO ACCESSORIES STRUT - SPORT STRUT 2925 90009 NS130 1 SPRING: TO 50 KGS STRUT - SPORT STRUT 2926 90009 NS131 SPRING: 51 TO 100 KGS STRUT - SPORT STRUT 2927 90009 NS131 REAR Estimated Lift: 40mm 2 UNIT PRICE $ 2 2 QTY 2926 90009 NS130 1 2790 90009 NS131 1 2 PART NUMBER 2927 90009 NS131 1 2 DIESEL ENGINE 2 2 UNIT PRICE $ 2 1 2 2 1 2 2 ALL MODELS PART NUMBER QTY SPRING: LIGHT LOAD NITROCHARGER SPORT NITROCHARGER 2947 60069 N132 1 SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2948 60069 N132 1 UNIT PRICE $ 2 2 REMARKS: 1 D to t varying i OE ride id heights, h i ht some KJ Models M d l may only l achieve hi Due a 20 20mm lift 2 No top mounting bushes supplied, re-use OE bushes. Page 18 OME NO.28 INT JULY 2012 CHRYSLER JEEP JEEP WRANGLER TJ & TJ UNLIMITED FRONT Estimated Lift: 50mm 6 CYLINDER ENGINE PART NUMBER SPRING: TO 40 KGS NITROCHARGER SPORT NITROCHARGER 2932 *60047 / 60046 *N66 / N66C SPRING: 41 TO 80 KGS NITROCHARGER SPORT NITROCHARGER TRIM PACKER STEERING DAMPER 2933 *60047 / 60046 N66 OMEJGF10 OMESD40 REAR Estimated Lift: 50mm SPRING: HARD TOP NITROCHARGER SPORT NITROCHARGER 2941 60048 N67 SPRING: CONSTANT 100 KGS NITROCHARGER SPORT NITROCHARGER 2942 60048 N67 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2949 60049 N67 FKWTJ01 FKWTJ02 OMEWTJPR10 JWGK01 JWGK02 JWGK03 FK16 GEARBOX PACKER KIT BUMPER STOP SPACER KIT 6 1 6 5 PART NUMBER 2941 60048 N67 TRIM PACKER 1 UNIT PRICE $ 1 2 1 2 1 2 DOOR SPRING: SOFT TOP NITROCHARGER SPORT NITROCHARGER PANHARD ROD BRACKET KIT QTY UNLIMITED QTY 1 UNIT PRICE $ PART NUMBER 2949 60049 N67 1 2 1 2949 60049 N67 - 1 2 1 1 2 6 1 2 2 1 3 1 3 4 1 2996 60049 N67 FKWTJ01 FKWTJ02 OMEWTJPR10 JWGK01 JWGK02 JWGK03 FK16 QTY 6 UNIT PRICE $ 1 2 6 1 2 1 2 2 1 3 1 3 4 1 REMARKS: 1 For ride height and trim adjustment use - Front: OMEJGF10 Rear: OMEWTJPR10 2 FKWTJ01 Panhard Rod Extension Bracket Kit fitment to right hand drive or FKWTJ02 to left hand drive Models is mandatory to ensure correct rear axle tracking. 3 A Gear Box Packer Kit is mandatory fitment to prevent driveline vibration. JWGK01 suits all Models to 2003. JWGK02 suits manual Models from 2003. JWGK03 suits auto Models from 2003. 4 FK16: Mandatory fitment 20mm Bump Stop Spacer Kit to prevent coil springs becoming solid on full compression. 5 OMESD40 only suitable for fitment to left hand drive Models. 6 To achieve optimal vehicle balance front to rear when Rear Spring 2949 is fitted, it is recommended that only 60047 is fitted to the front. Page 19 OME NO.28 INT JULY 2012 CHRYSLER JEEP JEEP WRANGLER YJ 1986 - 1996 FRONT Estimated Lift: 40 - 50mm PETROL ENGINE PART NUMBER QTY SPRING: TO 35 KGS: 50mm NITROCHARGER SPORT NITROCHARGER CS014F 60098 N33 SPRING: TO 95 KGS: 40mm NITROCHARGER SPORT NITROCHARGER CS014F 60098 N33 OMESB57 OMESB87 JWGK01 OMEGS11 OMESD40 D23XL 2 2 2 2 2 2 SPRING BUSH KIT GEAR BOX PACKER KIT GREASABLE SHACKLE KIT STEERING DAMPER EXTRA LEAF REAR Estimated Lift: 50mm SPRING: HARD TOP MEDIUM LOAD TO 200 KGS NITROCHARGER SPORT NITROCHARGER SPRING: SOFT TOP LIGHT LOAD NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT GREASABLE SHACKLE KIT EXTRA LEAF 2 2 1 1 1 1 2 2 3 UNIT PRICE $ ALL MODELS PART NUMBER QTY CS036R 2 60099 N34 2 2 CS037R 2 60099 N34 OMESB57 OMESB87 OMEGS11 D24XL 2 2 2 2 2 1 2 UNIT PRICE $ REMARKS: 1 JWGK01 fitment reduces driveline vibration. 2 Use OMESB57 with original shackles. OMESB87 with OMEGS11 greasable shackles. 3 OMESD40 will only fit left hand drive Models. Page 20 OME NO.28 INT JULY 2012 CHRYSLER JEEP JEEP WRANGLER JK 2 DOOR 2006 ON FRONT Estimated Lift: 50 mm SPRING: NO BAR SPRING: BAR SPRING: BAR AND WINCH NITROCHARGER SPORT NITROCHARGER STEERING DAMPER STEERING STABILIZER MOUNT KIT - LEFT HAND DRIVE TRIM PACKER CASTOR CORRECTION KIT REAR Estimated Lift: 50mm SPRING: MEDIUM LOAD SPRING: CONSTANT 150 KGS NITROCHARGER SPORT NITROCHARGER PANHARD ROD EXTENSION BKT KIT LEFT HAND DRIVE PANHARD ROD EXTENSION BKT KIT RIGHT HAND DRIVE TRIM PACKER SUSPENSION KIT Estimated Lift: 100mm 4" COMPLETE LIFT KIT V6 PETROL ENGINE PART NUMBER QTY 2626 2615 2627 60066 *N196 / N211 OMESD48 1 1 1 UNIT PRICE $ 2.8 DIESEL ENGINE PART NUMBER 3 1 2627 2616 2628 60066 *N196 / N211 OMESD48 FK50 3 1 OMEJKPF10 FK53 6 1 1 1 1 2 QTY 1 1 1 UNIT PRICE $ 1 1 1 2 3 1 FK50 3 1 OMEJKPF10 FK53 6 1 ALL MODELS PART NUMBER QTY 2630 2617 60067 *N198 / N212 1 1 1 1 UNIT PRICE $ 2 FK37 2 1 FK39 2 1 OMEJKPR10 4 4 PETROL ENGINE RHD MODELS PETROL ENGINE LHD MODELS PART NUMBER OMEJK4RHD QTY 5 UNIT PRICE $ 1 PART NUMBER OMEJK4 QTY 5 UNIT PRICE $ 1 REMARKS: 1 For trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10 Do not fit more than 1 packer per coil spring. 2 Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating the panhard rod to its original position. 3 FK50 is a mandatory fitment for 2006 To 2008 Models when fitting OMESD48. 4 2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust at full droop. 5 Kit includes: 2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x Front Forged Panhard, 1 x Bump Stop Kit, 1 x Brake Line Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar Link Disconnect Kit, 1 x Castor & Driveline Kit, 1 x Steering Damper Relocation Kit for LHD Models (not applicable for RHD Models), 2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton. See Page 23 for kit breakdown. 6 FK53 Caster Kit will increase caster angle by 2o. Check manufacturer's specification if Caster Kit is required. Page 21 OME NO.28 INT JULY 2012 CHRYSLER JEEP JEEP WRANGLER JK UNLIMITED 2006 ON FRONT Estimated Lift: 50 mm SPRING: NO BAR SPRING: BAR SPRING: BAR AND WINCH NITROCHARGER SPORT NITROCHARGER STEERING DAMPER STEERING STABILIZER MOUNT KIT - LEFT HAND DRIVE TRIM PACKER CASTOR CORRECTION KIT REAR Estimated Lift: 50mm SPRING: MEDIUM LOAD SPRING: CONSTANT 150KGS SPRING: CONSTANT 300KGS NITROCHARGER SPORT NITROCHARGER PANHARD ROD EXTENSION BKT KIT LEFT HAND DRIVE PANHARD ROD EXTENSION BKT KIT RIGHT HAND DRIVE TRIM PACKER SUSPENSION KIT Estimated Lift: 100mm 4" COMPLETE LIFT KIT V6 PETROL ENGINE PART NUMBER 2627 2616 2628 60066 *N196 / N211 OMESD48 QTY UNIT PRICE $ 2.8 DIESEL ENGINE PART NUMBER 3 1 2628 2619 2629 60066 *N196 / N211 OMESD48 FK50 3 1 OMEJKPF10 FK53 6 1 1 1 1 1 1 1 2 QTY 1 1 1 UNIT PRICE $ 1 1 1 2 3 1 FK50 3 1 OMEJKPF10 FK53 6 1 ALL MODELS PART NUMBER 2617 2618 2620 60067 *N198 / N212 QTY 1 1 1 UNIT PRICE $ 1 1 1 2 FK37 2 1 FK39 2 1 OMEJKPR10 4 4 PETROL ENGINE RHD MODELS PETROL ENGINE LHD MODELS PART NUMBER OMEJK4RHD QTY 5 UNIT PRICE $ 1 PART NUMBER OMEJK4 QTY 5 UNIT PRICE $ 1 REMARKS: 1 For trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10 Do not fit more than 1 packer per coil spring. 2 Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating the panhard rod to its original position. 3 FK50 is a mandatory fitment for 2006 To 2008 Models when fitting OMESD48. 4 2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust at full droop. 5 Kit includes: 2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x Front Forged Panhard, 1 x Bump Stop Kit, 1 x Brake Line Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar Link Disconnect Kit, 1 x Castor & Driveline Kit, 1 x Steering Damper Relocation Kit for LHD Models (not applicable for RHD Models), 2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton. See page 23 for kit breakdown. 6 FK53 Caster Kit will increase caster angel by 2o. Check manufacturer's specification if Caster Kit is required. Page 22 OME NO.28 INT JULY 2012 OFF ROAD USE ONLY - CHRYSLER JEEP WRANGLER JK COMPLETE KIT 100mm (4 Inch) LIFT KIT 100mm (4 Inch) LIFT KIT PART NUMBER QTY OMEJK4RHD OMEJK4 UNIT COMMENTS PRICE $ PETROL ENGINE RHD MODELS PETROL ENGINE LHD MODELS 1 1 KIT INCLUDES: 2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x Front Forged Panhard, 1 x Bump Stop Kit, 1 x Brakeline Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar Link Dis-Connect Kit, 1 x Castor & Driveline Kit, 2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton. FRONT PART NUMBER QTY UNIT PRICE $ COMMENTS COILS 100mm LIFT - PETROL 100mm LIFT - DIESEL 2642 3047 1 1 60066M 60066L 2 2 OMESD48 1 FK53 FK49 FK46 FK48 3460010 PANRJK001 FK40 OMEJKPF10 1 1 1 1 2 1 1 SHOCKS NITROCHARGER SPORT - MID LENGTH NITROCHARGER SPORT - LONG STEERING DAMPER STABILISER COMPONENTS CASTOR KIT CASTOR & DRIVELINE KIT BRAKELINE RELOCATION KIT (F&R) SWAY BAR LINK DIS-CONNECT KIT (F&R) FRONT SWAY BAR LINK ADJUSTABLE FRONT PANHARD ROD BUMP STOP EXTENSION KIT (F&R) TRIM PACKER REAR Front caster only, increases caster by 2o Adjust front caster and rear pinion angle Suits 100mm lift Link only, suits 100mm lift Forged 10mm PART NUMBER QTY UNIT PRICE $ COMMENTS COILS 100mm LIFT - MEDIUM 100mm LIFT - CONSTANT 300KG 2643 3046 1 1 60067L 2 FK47RHD 3460011 OMEJKPR10 1 2 SHOCKS NITROCHARGER SPORT - LONG COMPONENTS REAR PANHARD BRACKET KIT REAR SWAY BAR LINK TRIM PACKER RHD, suits 100mm lift Link only, suits 100mm lift Notification: Modifications for off - road use only The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for public road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by the customer. Modifications and replacement of other associated components will be required. Lift increase is approximate and will depend on vehicle weights. Warranty Implications The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent any future misunderstanding. Page 23 OME NO.28 INT JULY 2012 FORD RANGER PX 2011 ON FRONT Estimated Lift: 50mm DIESEL ENGINE PART NUMBER SPRING: No Bar STRUT SPORT QTY 2997 90019 1 2998 *90020 / 90019 1 SPRING: Bar / Winch STRUT SPORT 2999 90020 1 SPRING: No Bar: 30mm LIFT STRUT SPORT TRIM PACKER 3048 90019 FK56 SPRING: Bar STRUT SPORT REAR Estimated Lift: 50mm 1 UNIT PRICE $ 1 2 1 2 1 2 1 2 2 ALL MODELS PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT CS049R *60101 / 60023 SPRING: CONSTANT 300 KGS NITROCHARGER SPORT CS068R *60102 / 60101 SPRING: CONSTANT 600 KGS NITROCHARGER SPORT GREASABLE SHACKLE KIT CS069R 60102 OMEGS20 OMESB102 OMESB103 OMEU66 OMEU66A OMEU66B FK57 D34XL SPRING BUSH KIT U BOLTS DRIVELINE SPACER KIT EXTRA LEAF QTY 4 4 4 3 4 UNIT PRICE $ 2 2 2 2 2 2 1 2 4 4 5 6 1 2 REMARKS: 1 No top mounting bushes supplied, re-use OE bushes. 2 Trim Packer FK56 provides 10mm lift at the wheel. 3 OMESB102 suits OE Shackle. OMESB103 Bush Kit suits OME Greasable Shackle OMEGS20. 4 Use OMEU66 when fitting CS049R. Use OMEU66A when fitting CS068R. Use OMEU66B when fitting CS069R. 5 Fitment of Driveline Spacer Kit FK57 is recommended to re-align driveline. 6 D34XL will give approximately 30mm extra lift or increase loading capacity at design height by approximately 300kg. Page 24 OME NO.28 INT JULY 2012 FORD RANGER PJ/PK 12/2006 TO 2011 ALL MODELS (NOT USA MANUFACTURED MODEL) FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS: OVER 60 KGS NITROCHARGER SPORT NITROCHARGER FITTING KIT REAR Estimated Lift: 20mm 303013 60022 *N194 / N187 FK22 1 1 2 1 1 PART NUMBER CS056R 60023 N189 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER CS049R 60023 N189 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER GREASABLE SHACKLE KIT CS060R *60102 / 60023 N189 OMEGS18 OMEU66 OMEU66A OMESB97 D34XL SPRING BUSH KIT EXTRA LEAF 4 UNIT PRICE $ ALL MODELS SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER U BOLTS QTY 2 QTY 3 UNIT PRICE $ REMARKS: Note: Some South American Models, built in Argentina, use torsion bars with hexagonal ends. Above OME suspension is not suitable for these Models. 2 2 2 3 2 2 2 3 1 FK22 Front Shock Absorber Upper Mount Support Bracket Kit is a mandatory fitment. 2 Include tray weight in constant load calculation. 3 Use OMEU66 when fitting CS056R and CS049R. Use OMEU66A when fitting CS060R. CS060R 4 For Models with 2.5TD engine use torsion bar 303005. 2 2 1 3 4 2 2 COURIER/RANGER 1 TONNE 1985 - 2005 ALL MODELS (NOT USA MANUFACTURED MODEL) FRONT TORSION BARS: OVER 60 KGS NITROCHARGER SPORT NITROCHARGER FITTING KIT REAR Estimated Lift: 20mm PETROL & DIESEL ENGINES PART NUMBER QTY 303005 60022 N51 FK22 1 1 2 1 1 UNIT PRICE $ ALL MODELS PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER CS026R 60023 N53 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER U BOLTS GREASABLE SHACKLE KIT SPRING BUSH KIT EXTRA LEAF CENTRE BOLT CS027R 60023 N53 OMEU65 OMEGS18 OMESB82 D9XL UCB17 QTY 2 UNIT PRICE $ 1 FK22 Support Brackets must be installed to upper front shock mounting brackets on late 1996 On Models manufactured in Thailand. 2 Include tray weight in constant load calculation. 2 2 2 REMARKS: 2 2 4 1 2 2 2 Page 25 OME NO.28 INT JULY 2012 FORD FORD EXPLORER 1996 - 2001 REAR LEAF SPRING MODELS FRONT V6 PETROL ENGINE PART NUMBER TORSION BARS NITROCHARGER N16 QTY UNIT PRICE $ SPRING: MEDIUM LOAD NITROCHARGER EXTRA LEAF CENTRE BOLT 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 2 OE spring bushes are required to fit CS042R springs. D10XL extra leaf should be fitted when a constant 200kg plus load is carried. 1 2 REAR Estimated Lift: 40 mm REMARKS: PART NUMBER CS042R N17 D10XL UCB5 QTY 2 UNIT PRICE $ 2 2 2 2 FORD F250 & F350 2005 - 2008 ALL MODELS FRONT Estimated Lift: 45mm SPRING: TO 100 KGS NITROCHARGER CASTER CORRECTION KIT REAR Estimated Lift: 60+mm SPRING: MEDIUM LOAD THIRD STAGE SPRING:CONSTANT 600+KGS XL LEAF CENTRE BOLT NITROCHARGER U BOLTS - NO OVERLOAD LEAF U BOLTS - WITH OVERLOAD LEAF FITTING KIT SPACER KIT V8 DIESEL: COIL SPRING PART NUMBER QTY 2768 N195 FK36 1 2 1 4 UNIT PRICE $ ALL MODELS LEAF SPRING PART NUMBER CS048R TSXL01 CS048R D27XL UCB10 N179 OMEU68 OMEU67 FK31 FK35 OMESK1 QTY 1 2 2 2 2 2 2 4 4 3 1 3 1 1 1 1 2 1 UNIT PRICE $ REMARKS: 1 Springs are supplied with bushes fitted. Where the OE spring has an overload leaf fitted, it must be replaced with a TSXL01 and the CS048R original centre bolt replaced by a UCB10, the original spacing block must also be re-fitted using U Bolts OMEU67. 2 To maintain 60mm lift for loads over constant 600 KGS and add D27XL Extra Leaf. 3 Fitment of Driveline Spacer Kit FK31 for Crew Cab or FK35 for Xtra Cab is recommended to reduce possible driveline vibration. If required, additional spacing down of the centre bearing can be achieved by using an OMESK1 Spacer Kit. 4 Fitment of a FK36 Caster Correction Kit will provide approximately 3.5 to 4.0 degrees of extra caster. It is advisable to have a Front End Alignment carried out to determine if an FK36 kit is required. Page 26 OME NO.28 INT JULY 2012 FORD FORD F250 & F350 1999 - 2004 ALL MODELS FRONT Estimated Lift: 60mm SPRING: TO 150 KGS NITROCHARGER ADJUSTABLE PANHARD ROD U BOLTS - USA MODELS U BOLTS - BRAZIL MODELS REAR Estimated Lift: 60mm F250 PETROL & DIESEL PART NUMBER CS018F N178 APRF250 OMEU69 OMEU69A OMEU70 OMEU70A 1 QTY 6 1 SPRING: TO 600 KGS THIRD STAGE NITROCHARGER - SINGLE FITMENT NITROCHARGER - DUAL FITMENT CS048R N179 N179 + N180 2 SPRING: CONSTANT 600 KGS XL LEAF THIRD STAGE NITROCHARGER - SINGLE FITMENT NITROCHARGER - DUAL FITMENT U BOLTS CS048R D27XL N179 N179 + N180 OMEU68 FK31 FK35 OME660 2 3 2 4 2 2+2 2 2 2 2+2 4 1 2 1 QTY 6 1 OMEU69 UNIT PRICE $ 2 2 1 4 - F250 ALL MODELS QTY PART NUMBER CS018F N178 APRF250 2 2 1 2 2 2 2 PART NUMBER FITTING KIT UNIT PRICE $ F350 PETROL & DIESEL UNIT PRICE $ F350 ALL MODELS PART NUMBER CS048R TSXL01 N179 CS048R D27XL TSXL01 N179 OMEU67 FK31 FK35 OME660 QTY 5 5 5 3 5 UNIT PRICE $ 2 2 2 2 2 2 2 4 4 1 2 REMARKS: 1 APRF250 Adjustable Panhard Rod must be fitted to allow original axle location to be restored, bushes are supplied in rod. 2 For Models with dual shock fitment N179 must be fitted rear of the axle, as it is longer than the N180. OME660 Stone Shields are also a recommended fitment to the rear shocks. 3 To help maintain 60mm lift, add one D27XL Extra Leaf for every 400kgs carried over 600kgs. 4 Fitment of FK31 to Crew Cab or FK35 to Xtra Cab Models is recommended to reduce possible driveline vibration. 5 As the CS048R has a different spring camber, compared to the original spring, the overload leaf must be replaced with a TSXL01. The Original spacing block must be refitted. Springs are supplied with bushing. 6 Springs are supplied with bushing. Page 27 OME NO.28 INT JULY 2012 HOLDEN / ISUZU / GM JACKAROO/TROOPER & MONTEREY 3/2001 - 2004 SWB & LWB FRONT PART NUMBER TORSION BARS NITROCHARGER SPORT NITROCHARGER 60031 *N65 / N26F QTY UNIT PRICE $ 1 2 REAR Estimated Lift: 20mm PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2919 60074 N15 SPRING: CONSTANT 100 KGS NITROCHARGER SPORT NITROCHARGER 2929 60074 N15 QTY 2 UNIT PRICE $ 1 2 1 2 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 2 Coil must be installed with progressive rate to the top. JACKAROO/TROOPER & MONTEREY 1992 - 2/2001 SWB & LWB FRONT PART NUMBER TORSION BARS NITROCHARGER SPORT NITROCHARGER 60031 *N65 / N26F QTY UNIT PRICE $ 1 2 REAR Estimated Lift: 25mm PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2912 60074 N15 SPRING: CONSTANT 100 KGS NITROCHARGER SPORT NITROCHARGER 2919 60074 N15 QTY 2 UNIT PRICE $ 1 2 1 2 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 2 Coil must be installed with progressive rate to the top. Page 28 OME NO.28 INT JULY 2012 HOLDEN / ISUZU / GM JACKAROO/ISUZU TROOPER 1982 - 3/1992 ALL MODELS FRONT PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 20mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS ANTI INVERSION KIT GREASABLE SHACKLE KIT 303004 60031 *N65 / N26F QTY 1 UNIT PRICE $ 1 2 ALL MODELS PART NUMBER QTY CS028R 60009 60032 N88 *N42 / N89 2 UNIT PRICE $ 2 2 2 CS029R *60063 / 60009 *60064 / 60032 N88 N42 OMESB80 OMEU59A FK14 OMEGS13 2 2 2 2 3 4 2 4 1 1 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Torsion Bar 303004 suit Models from 8/88 To 3/92 only. Important: A minimum of 60mm of droop must be maintained. 2 60009 / 60063 / N88: Suits 11/'86 To 3/'92 Models and requires OMEB11 Bush Kit to convert lower bush from 19mm to 16mm ID. 60064 / 60032 / N42 / N89: Suits Models '82 To 10/'86 (no bush kit required). 3 Where the OE spring has 4 leaves OMEU59A U Bolts are required. 4 FK14 Anti Inversion Kit must be fitted if greasable shackles are not fitted. GM FRONTERA 5 DOOR 1999 - 6/2003 (USA - ISUZU RODEO WAGON) FRONT PART NUMBER TORSION BARS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 20mm SPRING: MEDIUM LOAD NITROCHARGER 60031 *N65 / N26F QTY UNIT PRICE $ 2 ALL MODELS PART NUMBER QTY 2913 N102 1 2 Page 29 UNIT PRICE $ OME NO.28 INT JULY 2012 HOLDEN / ISUZU / GM GM FRONTERA 1995 - 1998 (USA - ISUZU RODEO WAGON) 2 & 4 DOOR UT MODELS FRONT PART NUMBER TORSION BARS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 40mm SPRING: MEDIUM LOAD NITROCHARGER QTY 60031 *N65 / N26F UNIT PRICE $ 2 ALL MODELS PART NUMBER QTY 2912 N15 1 2 UNIT PRICE $ D-MAX 2008 - 2011 ALL MODELS COLORADO RC 2008 - 2011 ALL MODELS RODEO RA 2003 - 2011 ALL MODELS (NOT USA MANUFACTURED MODEL) FRONT PETROL ENGINE PART NUMBER TORSION BARS - NO LOAD NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 30 - 50mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 300 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS ANTI INVERSION KIT GREASABLE SHACKLE KIT EXTRA LEAF CENTRE BOLT 303012 60031 N65 N150 QTY 1 2 DIESEL ENGINE UNIT PRICE $ 303012 60031 1 2 N65 ALL MODELS PART NUMBER CS062R 60032 *N42 / N89 QTY 3 PART NUMBER 3 UNIT PRICE $ 1 2 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. It has been found, due to vehicle manufacturing tolerances, that in some cases front shock absorbers may contact the steering arm when on full lock. Fitter should check for this and where required a small indentation should be made to the body of the shock absorber. 303012 torsion bars have a lighter rate than OE and improve ride comfort for vehicles with no front accessory weight. Due to their heavy rate, the OE torsion bars are suitable for vehicles with front accessory weight. 2 Fit N65 when installing 303012 torsion bar to petrol Models and N150 for OE torsion bars. 3 Include tray weight in constant load calculation. CS062R and CS063R can be installed to high height 4x2 Models. OME leaf does not fit low height 4x2 Models. 2 2 2 2 4 1 1 2 2 Page 30 1 UNIT PRICE $ REMARKS: 2 CS063R *60064 / 60032 N42 OMESB80 OMEU66 FK26 OMEGS13 D26XL UCB15 QTY OME NO.28 INT JULY 2012 HOLDEN / ISUZU / GM RODEO/D-MAX TO 2003 ALL MODELS (NOT USA MANUFACTURED MODEL) FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 20mm 303004 60031 *N65 / N26F QTY 1 1 1 2 UNIT PRICE $ ALL MODELS PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER CS028R 60032 *N42 / N89 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT ANTI INVERSION KIT GREASABLE SHACKLE KIT U BOLTS EXTRA LEAF CENTRE BOLT CS029R 60064 N42 OMESB80 FK14 OMEGS13 OMEU59A D19XL UCB16 2 QTY 3 REMARKS: UNIT PRICE $ 3 4 2 Include tray weight in constant load calculation. 3 FK14 must be fitted if OMEGS13 greasable shackles are not fitted. 4 Vehicles with 4 Leaf OE spring stack require U bolts OMEU59A. 2 2 3 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 2 2 2 1 2 1 1 4 2 2 DROVER ALL MODELS (NOT USA MANUFACTURED MODEL) FRONT Estimated Lift: 40mm PART NUMBER QTY SPRING: TO 35 KGS NITROCHARGER CS012FA / B OME015 SPRING: 35 TO 75 KGS NITROCHARGER SPRING BUSH KIT CS013FA / B OME015 OMESB19 OMEU61 OMEU62 FK06 TP05 OMESD30 1+1 2 1+1 2 2 4 1 1 U BOLTS FITTING KIT TRIM PACKER STEERING DAMPER REAR Estimated Lift: 40mm 1 UNIT PRICE $ REMARKS: 1 1 One only OMEU62 may be required on the right hand side inner, on some Models. ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER CS038R OME013 SPRING: CONSTANT 100 KGS NITROCHARGER SPRING BUSH KIT U BOLTS TRIM PACKER CS039R OME013 OMESB19 OMEU61 TP05 2 2 2 2 2 4 Page 31 UNIT PRICE $ ` OME NO.28 INT JULY 2012 HUMMER H3 FRONT Estimated Lift: 20mm TORSION BARS NITROCHARGER SPORT REAR Estimated Lift: 20mm SPRING: MEDIUM LOAD NITROCHARGER SPORT EXTRA LEAF ALL MODELS PART NUMBER 303014 90001 QTY 1 UNIT PRICE $ 1 2 ALL MODELS PART NUMBER CS059R 60045 D36XL QTY 2 UNIT PRICE $ 2 2 2 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. It is important that a minimum of 60mm droop is maintained to prevent topping out of the front shock absorbers. 2 Springs supplied with bushings. Page 32 OME NO.28 INT JULY 2012 HYUNDAI TERRACAN 2001 ON FRONT Estimated Lift: 10mm PETROL ENGINE PART NUMBER QTY 60040 2 TORSION BARS NITROCHARGER SPORT REAR Estimated Lift: 20mm DIESEL ENGINE UNIT PRICE $ PART NUMBER QTY 60040 2 UNIT PRICE $ ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT 2603 60060 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT 2604 60060 1 2 1 2 UNIT PRICE $ KIA SORENTO BL TO 2009 FRONT Estimated Lift: 20mm SPRING: SPRING: 20 TO 60 KGS STRUT REAR Estimated Lift: 30mm SPRING: LIGHT LOAD NITROCHARGER SPRING: MEDIUM LOAD NITROCHARGER ALL MODELS PART NUMBER QTY 2902 2601 N148S N147S 2 LHS RHS 1 1 1+1 REMARKS: UNIT PRICE $ 1 2 No top mounting bushes supplied, reuse OE bushes. LATE 2006 ON MODELS PART NUMBER QTY MODELS 2003 TO LATE 2006 UNIT PRICE $ PART NUMBER 2622 N205 OME661 Stone Guards are recommended fitment to vehicles driven on dirt roads to prevent stone damage to the shock absorbers. N147S fits RHS, N148S fits LHS. 1 2 QTY 2602 N149 1 2903 N149 1 UNIT PRICE $ 1 2 1 2 LADA NIVA LADA NIVA FRONT REMARKS: Estimated Lift: 30mm 1 SPRING: NITROCHARGER TRIM PACKER REAR Estimated Lift: 30mm SPRING: MEDIUM LOAD NITROCHARGER PART NUMBER 2791 NOT AVAILABLE OMELNF10 QTY 1 UNIT PRICE $ 2010 On Models front lift less than 30mm. 1 ALL MODELS PART NUMBER QTY 2792 NOT AVAILABLE 1 Page 33 UNIT PRICE $ OME NO.28 INT JULY 2012 LAND ROVER DISCOVERY 3 2005 ON ALL COIL MODELS FRONT Estimated Lift: 50mm SPRING: SPRING: 100 KGS + STRUT PETROL & DIESEL ENGINES PART NUMBER QTY 2744 2745 USE OE 1 1 REAR Estimated Lift: 50mm SPRING: MEDIUM LOAD SPRING: CONSTANT 200 KGS STRUT UNIT PRICE $ 1 ALL MODELS PART NUMBER QTY 2746 2743 USE OE 1 1 UNIT PRICE $ 1 REMARKS: 1 Coils are suitable to be used with original OE struts, OME will not be developing replacement struts. DISCOVERY 1999 - 2004 ALL COIL SUSPENSION MODELS FRONT Estimated Lift: 40mm PETROL & DIESEL ENGINES PART NUMBER SPRING: TO 20 KGS NITROCHARGER SPORT NITROCHARGER 2776 60024 *N107 / N107C SPRING: 21 TO 50 KGS NITROCHARGER SPORT NITROCHARGER 2777 60024 *N107 / N107C SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER COIL PACKER 2779 60024 N107 OMESD02 OMELRCP2 REAR Estimated Lift: 40mm QTY 1 1 2 1 1 2 1 1 2 1 2 ALL MODELS PART NUMBER QTY 2781 60026 *N108 / N108C 1 SPRING: CONSTANT 100 KGS NITROCHARGER SPORT NITROCHARGER 2762 60025 N108 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER COIL PACKER 2763 60025 N108 OMELRCP1 1 SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER UNIT PRICE $ UNIT PRICE $ 2 2 2 2 REMARKS: 1 On 2003 Models lift will be between 25 to 35mm. 2 8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer. Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat. Page 34 OME NO.28 INT JULY 2012 LAND ROVER DISCOVERY TO 1998 & RANGE ROVER TO 5/19953 FRONT Estimated Lift: To 40mm PETROL ENGINES PART NUMBER QTY SPRING: TO 20 KGS: 20mm NITROCHARGER SPORT NITROCHARGER 2760 60037 *N115 / N45F 1 SPRING: TO 50 KGS: 30mm NITROCHARGER SPORT NITROCHARGER 2761 60037 *N115 / N45F 1 SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER 2767 60037 N115 OMESD11 CALR1 CALR2 OMELRCP1 1 CASTER KIT COIL PACKER REAR Estimated Lift: 40mm UNIT PRICE $ DIESEL ENGINES PART NUMBER UNIT PRICE $ - 2 2751 60037 *N115 / N45F 2 2767 60037 N115 OMESD11 CALR1 CALR2 OMELRCP1 2 1 1 QTY 1 2 1 2 1 2 1 1 1 2 ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2764 60038 *N46 / N27 1 SPRING: CONSTANT 100 KGS NITROCHARGER SPORT NITROCHARGER 2762 60039 *N44 / N46 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER COIL PACKER 2763 60039 N44 OMELRCP1 1 UNIT PRICE $ 2 2 2 2 REMARKS: 1 CALR1 : Fits pre '86 Range Rover. CALR2 : Fits post '86 Range Rover, all Discovery and Defender 130 Dual Cab Utility. NB: Do not fit to automatic Range Rovers or Discovery due to possible vibration problems. 2 8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer. Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat. 3 Not suitable for Models with air suspension. Page 35 OME NO.28 INT JULY 2012 LAND ROVER DEFENDER & COUNTY 110 FRONT Estimated Lift: To 40mm SPRING: TO 50 KGS: 30mm NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER CASTER KIT COIL PACKER FRONT Estimated Lift: To 40mm SPRING: TO 50 KGS: 30mm NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER CASTER KIT COIL PACKER REAR Estimated Lift: To 55mm V8 PETROL ENGINES PART NUMBER 2761 60037 N45F QTY UNIT PRICE $ 2 1 2766 60037 N115 OMESD32 1 CALR1 1 1 2 1 PART NUMBER 2766 60037 *N115 / N45F 1 1 2751 60037 N115 OMESD32 CALR1 CALR2 OMELRCP1 3.9 ISUZU DIESEL ENGINES OMELRCP1 4 QTY 1 UNIT PRICE $ 1 2 1 1 2 1 1 4 2.5 DIESEL ENGINES PART NUMBER QTY 2751 60037 N45F 1 2767 60037 N115 OMESD32 CALR1 CALR2 OMELRCP1 1 UNIT PRICE $ 2 2 1 1 1 4 ALL MODELS PART NUMBER SPRING: LIGHT LOAD: 25mm NITROCHARGER SPORT NITROCHARGER 2752 60038 *N46 / N27 SPRING: CONSTANT 300 KGS NITROCHARGER SPORT NITROCHARGER 2755 60039 N44 SPRING: CONSTANT 500 KGS NITROCHARGER SPORT NITROCHARGER COIL PACKER 2754 60039 N44 OMELRCP3 QTY 2 UNIT PRICE $ 1 2 1 2 3 1 2 4 REMARKS: 1 Caution: Due to altered gearbox mounts on Models after 1998 any lift above OE ride height may cause front driveline vibration that can only be rectified by fitment of front double cardan joints. Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if Caster Kit is required. CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms. 2 2752 coil has a softer spring than OE coil. This is to provide improved ride quality with light loads only OE springs are designated as medium load springs. 3 Original inner helper coil, where fitted, must be re-installed with OME Coils. 4 8mm Steel Coil Seat Packer, refer to selection chart supplied with packer. Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat. Page 36 OME NO.28 INT JULY 2012 LAND ROVER DEFENDER 130 MODEL FRONT Estimated Lift: 20mm 2.5 DIESEL ENGINE PART NUMBER QTY SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER 2751 60037 *N115 / N45F 1 SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER CASTER KIT COIL PACKER 2767 60037 N115 OMESD32 CALR2 OMELRCP1 1 REAR Estimated Lift: To 40mm UNIT PRICE $ 2 1 2755 60039 *N44 / N46 1 1 CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms. 2 Important: 2755 has reduced spring rate SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER COIL PACKER 2754 60039 N44 OMELRCP3 QTY 2 UNIT PRICE $ from OE to provide improved ride quality for light loads. Original inner helper coil, where fitted, must be re-installed with OME coils. 3 8mm Steel Coil Seat Packer, refer to 1 selection chart supplied with packer. Important: To prevent possible overstressing of the spring, only one packer can be fitted under each coil seat. 2 4 on Models after 1998 any lift above OE ride height will cause front driveline vibration that can only be rectified by fitment of front double cardan joints. 2 DIESEL ENGINE SPRING: LIGHT LOAD: 25mm NITROCHARGER SPORT NITROCHARGER 1 Caution: Due to altered gearbox mounts Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if Caster Kit is required. 3 PART NUMBER REMARKS: 1 2 4 Original inner helper coil, where fitted, must 3 be re-installed with OME coils. 90 SERIES FRONT Estimated Lift: 30mm SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER CASTER KIT REAR Estimated Lift: 45 - 55mm PETROL ENGINE PART NUMBER QTY 2761 60037 N45F 1 DIESEL ENGINE UNIT PRICE $ 2 2751 60037 N115 OMESD32 CALR1 QTY 2751 60037 N115 1 2767 60037 N115 OMESD32 CALR1 1 2 1 PART NUMBER 1 1 UNIT PRICE $ 2 1 2 1 1 1 ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2764 60038 *N46 / N27 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2762 60039 *N44 / N46 1 UNIT PRICE $ 2 2 REMARKS: 1 Caution: Due to altered gearbox mounts on Models after 1998 any lift above OE ride height may cause front driveline vibration that can only be rectified by fitment of front double cardan joints. Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if Caster Kit is required. CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms. Page 37 OME NO.28 INT JULY 2012 MAZDA BT50 2011 ON FRONT Estimated Lift: 50mm SPRING: No Bar STRUT SPORT SPRING: Bar STRUT SPORT DIESEL ENGINE PART NUMBER 2997 90019 1 2998 *90020 / 90019 1 SPRING: Bar / Winch STRUT SPORT TRIM PACKER 2999 90020 FK56 SPRING: No Bar: 30mm LIFT STRUT SPORT 3048 90019 REAR Estimated Lift: 50mm 2 ALL MODELS PART NUMBER SPRING: CONSTANT 300 KGS NITROCHARGER SPORT CS068R *60102 / 60101 SPRING: CONSTANT 600 KGS NITROCHARGER SPORT GREASABLE SHACKLE KIT CS069R 60102 OMEGS20 OMESB102 OMESB103 OMEU66 OMEU66A OMEU66B FK57 D34XL DRIVELINE SPACER KIT EXTRA LEAF 1 2 1 CS049R *60101 / 60023 U BOLTS UNIT PRICE $ 1 2 1 2 1 2 1 SPRING: MEDIUM LOAD NITROCHARGER SPORT SPRING BUSH KIT QTY QTY 4 4 4 3 4 UNIT PRICE $ 2 2 2 2 2 2 1 2 4 4 5 6 1 2 REMARKS: 1 No top mounting bushes supplied, re-use OE bushes. 2 Trim Packer FK56 provides 10mm lift at the wheel. 3 OMESB102 suits OE Shackle. OMESB103 Bush Kit suits OME Greasable Shackle OMEGS20. 4 Use OMEU66 when fitting CS049R. Use OMEU66A when fitting CS068R. Use OMEU66B when fitting CS069R. 5 Fitment of Driveline Spacer Kit FK57 is recommended to re-align driveline. 6 D34XL will give approximately 30mm extra lift or increase loading capacity at design height by approximately 300kg. Page 38 OME NO.28 INT JULY 2012 MAZDA BT50 1 TONNE 12/2006 - 2011 ALL MODELS FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS: OVER 60 KGS NITROCHARGER SPORT NITROCHARGER FITTING KIT REAR Estimated Lift: 20mm 303013 60022 *N194 / N187 FK22 1 2 2 2 1 PART NUMBER CS056R 60023 N189 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER CS049R 60023 N189 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER GREASABLE SHACKLE KIT CS060R *60102 / 60023 N189 OMEGS18 OMEU66 OMEU66A OMESB97 D34XL SPRING BUSH KIT EXTRA LEAF 1 UNIT PRICE $ REMARKS: 1 ALL MODELS SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER U BOLTS QTY QTY 3 UNIT PRICE $ 2 2 FK22 Front Shock Absorber Upper Mount Supporting Bracket Kit is a mandatory fitment. 3 Use OMEU66 when fitting CS056R and 2 3 Some Latin American 12/2006on Models use 303005 torsion bars, measuring 925mm in length. The 303013 torsion bars measure 1024mm. Check OE torsion bar length before ordering. CS049R. Use OMEU66A when fitting CS060R. Include tray weight in constant load calculation. 2 2 3 2 2 1 3 4 2 2 B SERIES 1 TONNE 1987 - 2006 ALL MODELS FRONT TORSION BARS: OVER 60 KGS NITROCHARGER SPORT NITROCHARGER FITTING KIT REAR Estimated Lift: 20mm PETROL & DIESEL ENGINES PART NUMBER QTY 303005 60022 N51 FK22 1 1 2 1 1 UNIT PRICE $ REMARKS: 1 FK22 Front Shock Absorber Upper Mount Supporting Bracket Kit is a mandatory fitment. 2 Include tray weight in constant load ALL MODELS PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER CS026R 60023 N53 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER U BOLTS GREASABLE SHACKLE KIT SPRING BUSH KIT EXTRA LEAF CENTRE BOLT CS027R 60023 N53 OMEU65 OMEGS18 OMESB82 D9XL UCB17 QTY 2 calculation. UNIT PRICE $ 2 2 2 2 2 4 1 2 2 2 Page 39 OME NO.28 INT JULY 2012 MITSUBISHI PAJERO / MONTERO 2000 ON ALL LWB MODELS FRONT Estimated Lift: 35mm V6 PETROL ENGINE PART NUMBER QTY SPRING: TO 50 KGS STRUT - SPORT STRUT 2914 90006 N129S 1 SPRING: 51 TO 100 KGS STRUT - SPORT STRUT 2915 90007 N203S REAR Estimated Lift: 40mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2 UNIT PRICE $ 2 PART NUMBER QTY 2915 90006 N129S 1 2924 90007 N203S 1 2 2.8 & 3.2 DIESEL ENGINES 2 2 UNIT PRICE $ 2 1 2 2 ALL MODELS PART NUMBER 2917 60019 N152 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2918 60033 *N204 / N152 SPRING: CONSTANT 300 KGS NITROCHARGER SPORT NITROCHARGER 2995 60033 N204 QTY 1 UNIT PRICE $ 1 2 1 1 2 1 2 REMARKS: 1 i recommended d d that th t a 4 wheel h l alignment li t is i carried i d outt It is 2 No top mounting bushes supplied, re-use OE bushes. PAJERO / MONTERO 2000 ON ALL SWB MODELS FRONT Estimated Lift: 35mm V6 PETROL ENGINE PART NUMBER QTY SPRING: TO 50 KGS STRUT - SPORT STRUT 2914 90006 *N129S / N109S 1 SPRING: 51 TO 100 KGS STRUT - SPORT STRUT 2915 90007 *N203S / N129S REAR Estimated Lift: 40mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2 UNIT PRICE $ 2 PART NUMBER QTY 2915 90006 N129S 1 2924 90007 N203S 1 2 3.2 DIESEL ENGINE 2 2 UNIT PRICE $ 2 1 2 2 ALL MODELS PART NUMBER 2994 60019 N152 QTY 1 UNIT PRICE $ 1 2 2917 60033 *N204 / N152 1 1 2 REMARKS: 1 It is recommended that a 4 wheel alignment is carried out. 2 No top mounting bushes supplied, re-use OE bushes. Page 40 OME NO.28 INT JULY 2012 MITSUBISHI PAJERO / MONTERO 1991 - 1999 SWB & LWB REAR LEAF SPRING MODELS FRONT PART NUMBER 303010 303011 60040 N18 TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 45 - 50mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 250 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT GREASABLE SHACKLE KIT QTY 1 UNIT PRICE $ 1 1 2 ALL MODELS PART NUMBER CS022R 60057 *N56 / N54 QTY 2 UNIT PRICE $ 2 2 CS023R *60036 / 60057 N56 OMESB38 OMEGS16 2 2 2 2 2 1 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 303010 suits it 88 To T 90 V6 Models M d l and d allll Models M d l 91 To T 94 - llength th 1278 1278mm 303011 suits all Models 95 To 00 - length 1308mm. 2 OMESB38 must be used to fit OME springs. PAJERO / MONTERO 1991 - 1999 ALL LWB REAR COIL SPRING MODELS FRONT PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: To 20mm 303010 303011 60040 N18 QTY 1 UNIT PRICE $ 1 1 2 ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2910 60041 N64 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2938 60041 N64 UNIT PRICE $ 2 1 2 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 303010 suits all Models 91 To 94 with 1278mm length. 303011 suits all Models 95 To 00 with 1308mm length Page 41 OME NO.28 INT JULY 2012 MITSUBISHI PAJERO / MONTERO 1991 - 1999 ALL SWB REAR COIL SPRING MODELS FRONT PART NUMBER TORSION BARS NITROCHARGER SPORT NITROCHARGER 60040 N18 REAR Estimated Lift: 20mm QTY UNIT PRICE $ 1 2 ALL MODELS PART NUMBER QTY 2911 60041 N64 1 SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER UNIT PRICE $ 2 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. PAJERO / MONTERO TO 1991 REAR LEAF SPRING MODELS (Hyundai Galloper) FRONT 4 CYLINDER ENGINE PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER 303009 60051 N60G REAR Estimated Lift: 45 - 50mm QTY 1 UNIT PRICE $ 1 2 ALL MODELS PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 250 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT CS022R 60057 *N56 / N54 QTY 2 UNIT PRICE $ 2 2 CS023R *60036 / 60057 N56 OMESB8 OMEU54 OMEGS16 2 2 2 2 3 2 4 1 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 303009 suits 82 To 90 4 cylinder Models - length 1278mm. 2 OMESB8 must be used with CS022R and CS023R springs. 3 OMEU54 only required on SWB Models. Page 42 OME NO.28 INT JULY 2012 MITSUBISHI PAJERO CHALLENGER 1989 - 1991 REAR COIL SPRING MODELS (Hyundai Galloper) (USA - MONTERO SPORT) FRONT PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 15mm SPRING: MEDIUM LOAD NITROCHARGER SPORT 303010 60051 N60G QTY 1 UNIT PRICE $ 1 2 ALL MODELS PART NUMBER QTY 2910 60056 1 2 UNIT PRICE $ REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 303010 suits 88 To 90 V6 Models. TRITON / L200 ML & MN 2006 ON ALL MODELS FRONT Estimated Lift: 10mm DIESEL ENGINE PART NUMBER QTY SPRING: NO BAR STRUT - SPORT STRUT 2605 90008 N186S 1 SPRING: BAR ONLY STRUT - SPORT STRUT 2606 90008 N186S SPRING: BAR & WINCH STRUT - SPORT STRUT 3027 90008 N186S REAR Estimated Lift: 20mm 4 4 2 4 2 2 SPRING: CONSTANT 300 KGS NITROCHARGER SPORT NITROCHARGER CS054R 60036 N59 SPRING: CONSTANT 500 KGS NITROCHARGER SPORT NITROCHARGER CS022R 60036 N59 SPRING: CONSTANT 800 KGS NITROCHARGER SPORT NITROCHARGER CS023R 1 60036 N59 OMEU71 OMEU76 OMESB38 OMEGS16 D32XL UCB10 1 1 QTY 2 2 2 2 3 UNIT PRICE $ 2 3 2 2 5 6 2 1 7 4 2 1 4 2 1 4 2 OMEGS16 is a mandatory fitment to prevent springs from inverting. 2 OMESB38 is a mandatory fitment to OME springs only. Include tray weight in constant load calculation. Springs can only be installed with OME Bush Kit. 3 Reverse centre bolt to allow fitment. No top mounting bushes supplied, re-use OE bushes. 4 2 2 1 REMARKS: 2 2 2611 90008 N186S UNIT PRICE $ 1 2 1 QTY 2606 90008 N186S ALL MODELS PART NUMBER PART NUMBER 2605 90008 N186S 1 CS053R 60036 *N59 / N54 SPRING BUSH KIT GREASABLE SHACKLE KIT EXTRA LEAF CENTRE BOLT UNIT PRICE $ 1 SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER U BOLTS V6 PETROL ENGINE 5 OMEU71 is to be used with CS053R, CS054R, CS022R. 6 OMEU76 is to be used with CS023R. D32XL suitable for CS053R and CS054R. 7 4 4 2 1 2 2 Page 43 OME NO.28 INT JULY 2012 MITSUBISHI TRITON / L200 MK 10/1996 - 2006 ALL MODELS FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: To 40mm 303006 60040 *N18 / N57G QTY 1 UNIT PRICE $ REMARKS: 1 1 Raise or lower front end clearance and 2 trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Torsion bar 303006 suits 1993 On Models with 39 splines. ALL MODELS PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER CS022R 60050 N30E SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER U BOLTS SPRING BUSH KIT ANTI-INVERSION KIT GREASABLE SHACKLE KIT CS023R 60050 N30E OMEU57 OMESB38 FK30 OMEGS16 2 QTY 3 UNIT PRICE $ 2 OMESB38 is a mandatory fitment to 2 OME springs only. Include tray weight in constant load calculation. Springs can only be installed with OME bush kits. 2 2 3 2 2 2 3 3 FK30 Anti-Inversion Kit is a mandatory fitment, with or without Greasable Shackle Kit. 4 2 1 1 TRITON / L200 TO 1996 ALL MODELS FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: To 40mm 303006 60051 N60G QTY 1 UNIT PRICE $ 1 2 ALL MODELS PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER CS022R 60058 N30E SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER U BOLTS SPRING BUSH KIT ANTI-INVERSION KIT GREASABLE SHACKLE KIT CS023R 60058 N30 OMEU57 OMESB38 FK30 OMEGS16 2 QTY 3 UNIT PRICE $ 2 2 2 3 2 2 2 3 4 2 1 1 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Torsion Bar 303006 suits 1993 On MJ Models with 39 splines. 2 OMESB38 is a mandatory fitment to OME springs only. Include tray weight in constant load calculation. Springs canonly be installed with OME Bush Kits. 4 3 FK30 Anti-Inversion kit is a mandatory fitment, with or without Greasable Shackle Kit. Page 44 OME NO.28 INT JULY 2012 MITSUBISHI CHALLENGER / MONTERO SPORT KH 2010 ON MODELS FRONT Estimated Lift: 20mm V6 PETROL ENGINE PART NUMBER QTY SPRING: NO BAR STRUT - SPORT STRUT 2611 90008 N186S 1 SPRING: BAR ONLY STRUT - SPORT STRUT 2605 90008 N186S SPRING: BAR & WINCH STRUT - SPORT STRUT 2606 90008 N186S REAR Estimated Lift: 35mm 1 2 1 2 QTY 2605 90008 N186S 1 3027 90008 N186S 1 1 PART NUMBER 2606 90008 N186S 1 2 1 UNIT PRICE $ 2 1 1 2 1 1 2 ALL MODELS PART NUMBER QTY 2910 60076 N116 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2938 *60075 / 60076 N116 1 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER 2838 60075 N116 1 SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER UNIT PRICE $ DIESEL ENGINE UNIT PRICE $ 2 2 2 REMARKS: 1 No top mounting bushes supplied, re-use OE bushes. CHALLENGER / MONTERO SPORT 2000 - 2008 LWB (COIL REAR MODELS) FRONT V6 PETROL ENGINE PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 40mm 303011 60040 N57G QTY 1 UNIT PRICE $ 1 2 ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2911 60059 N116 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2910 60059 N116 1 UNIT PRICE $ 2 2 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Page 45 OME NO.28 INT JULY 2012 MITSUBISHI CHALLENGER V6 / MONTERO SPORT WAGON PA 1998 - 2000 (REAR LEAF SPRING MODELS) FRONT V6 PETROL ENGINE PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 25mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT GREASABLE SHACKLE KIT EXTRA LEAF CENTRE BOLT 303011 60040 N57G QTY 1 UNIT PRICE $ 1 2 ALL MODELS PART NUMBER CS040R 60057 *N56 / N54 2 QTY 3 UNIT PRICE $ 2 2 CS041R 2 *60036 / 60057 N56 OMESB83 OMEGS16 D7XL UCB5 3 2 2 3 2 2 1 2 2 REMARKS: 1 Raise or lower front end clearance and trim vehicle byy adjusting j g front torsion bars. Important: A minimum of 60mm of droop must be maintained. 303011 suits all Models with bar - length 1308mm. 2 OMEGS16 is a mandatory fitment to prevent springs from inverting. 3 OMESB38 is a mandatory fitment to OME springs only. Include tray weight in constant load calculation. Springs can only be installed with OME Bush Kit. The Centre Bolt on CS040R must be reversed prior to fitment. Page 46 OME NO.28 INT JULY 2012 NISSAN PATROL Y62 2010 ON (NON HBMC MODELS) FRONT Estimated Lift: 40mm SPRING: No Bar STRUT - SPORT SPRING: Bar STRUT - SPORT SPRING: Bar / Winch STRUT - SPORT REAR Estimated Lift: 50mm SPRING: MEDIUM LOAD NITROCHARGER SPORT V8 PETROL ENGINE PART NUMBER QTY 2977 90014 2 2978 *90015 / 90014 2 2979 90015 2 UNIT PRICE $ 1 2 1 2 1 2 ALL MODELS PART NUMBER 2986 60084 QTY 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT 2987 *60085 / 60084 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT 2988 60085 1 1 UNIT PRICE $ 1 2 1 2 1 2 REMARKS: 1 It is recommended that a 4 wheel alignment is carried out. 2 No top mounting bushes supplied, re-use OE bushes. Page 47 OME NO.28 INT JULY 2012 OFF ROAD USE ONLY - NISSAN PATROL Y60 & Y61 LWB FRONT PART NUMBER QTY 2412 3033 2413 3036 2414 1 1 1 1 1 250 lbf/in 60013L 2 Suits 75mm &100mm coils 1 GQ pre 8/1989 models GQ 8/1989 on models GU pre 01/2000 models GU 01/2000 on models UNIT PRICE $ COMMENTS COILS 75mm LIFT - SPRING TO 50KG 75mm LIFT - SPRING 51 TO 110KG 100mm LIFT - SPRING TO 50KG 100mm LIFT - SPRING 51 TO 110KG 125mm LIFT - SPRING TO 50KG 320 lbf/in 250 lbf/in 320 lbf/in 250 lbf/in SHOCKS NITROCHARGER SPORT STEERING DAMPER STABILISER OMESD34 OMESD36 OMESD11 OMESD01 COMPONENTS ADJUSTABLE PANHARD ROD ADJUSTABLE PANHARD ROD WITH SPH BEARING SPHERICAL BEARING TO SUIT PANHARD COIL SPRING TRIM PACKER COIL SPRING TRIM PACKER GEARBOX PACKER KIT REAR PANR004 PANR028X PAN3097A OME3098 OMEGQPF05 OMEGQPF10 GQGK01 PART NUMBER Pre 01/2000 models, RHD only - avail. Oct 12 01/2000 on models, RHD only - avail. Oct 12 Pre 01/2000 models, LHD only - avail. Oct 12 Suits OE and Adjustable 01/00 on - avail. Oct 12 5mm 1 1 1 10mm GQ only 1 QTY Q UNIT PRICE $ COMMENTS COILS 75mm LIFT - MEDIUM 75mm LIFT - CONSTANT 200KG 75mm LIFT - CONSTANT 400KG 100mm LIFT - MEDIUM 100mm LIFT - CONSTANT 200KG 100mm LIFT - CONSTANT 400KG 125mm LIFT - MEDIUM 2415 3034 3035 290 lbf/in 2417 1 1 1 1 1 1 1 60015L 2 PANR005 1 Pre 01/2000 models, RHD & LHD - avail. Oct 12 ADJUSTABLE PANHARD ROD WITH SPH BEARING PANR029X 1 01/2000 on models, RHD & LHD - avail. Oct 12 SPHERICAL BEARING TO SUIT PANHARD HEAVY DUTY LOWER TRAILING ARMS ADJUSTABLE UPPER TRAILING ARMS TRIM PACKER TRIM PACKER OME3098 LTA3044 UTAA106 OMEGQPR05 OMEGQPR10 1 1 1 Suits OE and Adjustable 01/00 on - avail. Oct 12 Standard Length - avail Nov 12 2416 3037 3038 300 lbf/in 470 lbf/in, coil tower reinforcing recommended 290 lbf/in 300 lbf/in 470 lbf/in, coil tower reinforcing recommended 290 lbf/in SHOCKS NITROCHARGER SPORT COMPONENTS ADJUSTABLE PANHARD ROD 50mm on car adjustable - avail. Nov 12 5mm 10mm Notification: Modifications for off - road use only The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for public road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by the customer. Modifications and replacement of other associated components will be required. Lift increase is approximate and will depend on vehicle weights. Warranty Implications The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing. p "racing g application pp pp p The fitter must also note on the customer's receipt no warrantyy applies". This will prevent anyy future misunderstanding. Page 48 OME NO.28 INT JULY 2012 NISSAN PATROL GU Y61 ALL LWB MODELS FRONT Estimated Lift: 50mm SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 50 KGS: 20mm LIFT NITROCHARGER SPORT NITROCHARGER CASTER KIT STEERING DAMPER TRIM PACKER OIL PAN PACKER KIT REAR Estimated Lift: 50mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER PETROL 4.5, 4.8 & DIESEL 4.2 PART NUMBER QTY 2970 61012 *N19 / N19C 1 2971 60013 N19 1 2 2 2972 61012 *N19 / N19C OMECA77B OMESD11 OMESD01 OMEGQPF05 OMEGQPF10 FK25 2 2 1 5 1 1 2 PART NUMBER QTY 2973 61012 *N19 / N19C 1 2970 60013 N19 1 2974 61012 *N19 / N19C OMECA77B OMESD11 OMESD01 OMEGQPF05 OMEGQPF10 FK25 1 1 UNIT PRICE $ 2 2 1 2 2 1 5 1 1 2 1 ALL MODELS PART NUMBER 2980 61014 *N29 / N29C QTY 4 UNIT PRICE $ 1 2 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2981 60015 N29 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER 2985 60015 N29 SPRING: MEDIUM 30mm LIFT NITROCHARGER SPORT NITROCHARGER TRIM PACKER 4 2982 61014 *N29 / N29C Do not use Packers FK18 3 FK24 SWAY BAR EXT KIT UNIT PRICE $ DIESEL 2.8 & 3.0 TURBO 4 1 2 6 1 2 1 2 1 REMARKS: 1 Coil trim packers may be required to trim vehicles. Packers must be installed to the bottom of front coils. 2 OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if OMECA77B kit is required. FK25 may be required for some European Models when Caster Kit is fitted. 3 FK18: Rear Sway Bar Extension Bracket is mandatory fitment to Models with fixed sway bar to prevent damage to sway bar when suspension is at full extension. FK24 suits Models with detachable sway bar. 4 Special Note: Due to limited clearance between tailshaft and chassis cross member, OME does not recommend fitment of gear box packers. 5 OMESD11 steering damper fits all Models To 1/2000. OMESD01 fits 2/2000 On Models. To verify correct fitment for individual vehicles compare OE mounts with Steering Stabilisers Specifications on Page 119. 6 It is highly recommended to reinforce coil towers if fitting heavy rear springs. Page 49 OME NO.28 INT JULY 2012 NISSAN PATROL GU Y61 SWB MODELS FRONT Estimated Lift: 40mm SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER TRIM PACKER STEERING DAMPER CASTER KIT OIL PAN PACKER KIT REAR Estimated Lift: 40mm 2.8 & 3.0 TURBO DIESEL PART NUMBER QTY 2974E 61012 *N19 / N19C 1 2 2972E 60013 N19 OMEGQPF05 OMEGQPF10 OMESD01 OMESD11 OMECA77B FK25 1 2 1 1 2 1 3 ALL MODELS PART NUMBER QTY SPRING: LIGHT LOAD NITROCHARGER SPORT NITROCHARGER 2GQ02A 61014 *N29 / N29C 1 SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2GQ02B 61014 *N29 / N29C 1 2GQ02D 60015 N29 FK18 FK24 GQGK02 OMEGQPR05 OMEGQPR10 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER SWAY BAR EXT KIT GEAR BOX PACKER KIT TRIM PACKER UNIT PRICE $ UNIT PRICE $ 2 2 2 4 1 5 REMARKS: 1 OMESD01 fits 2/2000 On Models. OMESD11 fits all Models To 1/2000. 2 OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if OMECA77B kit is required. 3 FK25 x 2 Oil Pan Kits must be installed when OMECA77B Caster Kit or GQGK02 Gear Box Packer Kit are fitted. 4 FK18: Rear Sway Bar Extension Bracket is mandatory fitment to Models with fixed sway bar to prevent damage to sway bar when suspension is at full extension. FK24 suits Models with detachable sway bar. 5 GQGK02 Gear Box Packer Kit is designed to space down the gear box cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. In some cases 2 kits may be required. Page 50 OME NO.28 INT JULY 2012 NISSAN PATROL GU Y61 ALL COIL CAB CHASSIS MODELS FRONT Estimated Lift: 50mm SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER CASTER KIT TRIM PACKER REAR Estimated Lift: 50mm ALL 4.2 DIESEL ENGINES PART NUMBER QTY 2970 61012 *N19 / N19C 1 2971 60013 N19 OMESD11 OMECA77B OMEGQPF05 OMEGQPF10 1 UNIT PRICE $ 2 2 1 1 1 2 3.0 TURBO DIESEL ENGINE PART NUMBER QTY 2973 61012 *N19 / N19C 1 2970 60013 N19 OMESD11 OMECA77B OMEGQPF05 OMEGQPF10 1 UNIT PRICE $ 2 2 1 1 1 2 ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2983 61014 N29 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2984 60015 N29 1 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER FITTING KIT TRIM PACKER 2985 60015 N29 3 FK18 Do not use Packers 1 UNIT PRICE $ 2 2 2 1 REMARKS: 1 OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if OMECA77B kit is required. 2 Coil trim packers may be required to trim vehicle to a maximum of 15mm. Packers must be installed to the bottom on front coil. 3 FK18 Rear Sway Bar Extension Bracket is mandatory fitment to prevent damage to sway bar when suspension is at full extension. Page 51 OME NO.28 INT JULY 2012 NISSAN PATROL GU Y61 CAB CHASSIS COIL: FRONT / LEAF: REAR FRONT Estimated Lift: 50mm SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER CASTER KIT TRIM PACKER REAR Estimated Lift: 50mm ALL 4.2 DIESEL ENGINES PART NUMBER QTY 2970 60055 *N19 / N19C 1 2971 60055 N19 OMESD11 OMECA77B OMEGQPF05 OMEGQPF10 1 2 2 1 1 1 PART NUMBER CS016RA/B 60054 N25 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT ANTI INVERSION KIT CS016RA/B 3 60054 N25 OMESB64 FK08 OMEGS1 OMEGP2 OMEU64 FK41 D15XL UCB11 U BOLT BUMP STOP EXTENSION KIT EXTRA LEAF CENTRE BOLT 2 PART NUMBER QTY 2973 60055 *N19 / N19C 1 2970 60055 N19 OMESD11 OMECA77B OMEGQPF05 OMEGQPF10 1 UNIT PRICE $ 2 2 2 1 1 1 ALL MODELS SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER GREASABLE SHACKLE KITS UNIT PRICE $ 3.0 TURBO DIESEL ENGINE 3 4 QTY 5 UNIT PRICE $ 1+1 2 4 5 1+1 2 3 2 1 1 5 4 1 2 2 REMARKS: 1 Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil. Packers must be installed to the bottom on front coils. 2 OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if OMECA77B kit is required. 3 FK08 Anti Inversion Kit is mandatory fitment if greasable shackles are not fitted. Refer OME Technical & Fitting Manual. 4 For improved ride quality on vehicles carrying medium loads remove the 3rd leaf. Include tray weight in constant load calculation. 5 It is recommended to fit FK41 Bump Stop Extension Kit especially in high articulation situations. Page 52 OME NO.28 INT JULY 2012 NISSAN PATROL GQ Y60 ALL SWB & LWB MODELS FRONT Estimated Lift: 40 - 50mm SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 50 KGS: 30mm LIFT NITROCHARGER SPORT NITROCHARGER TRIM PACKER STEERING DAMPER CASTER KIT REAR Estimated Lift: 30 - 50mm SPRING: LIGHT LOAD NITROCHARGER SPORT NITROCHARGER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 4.2 ENGINE PART NUMBER QTY 2975 61012 *N21 / N23F 1 2976 60013 N21 1 2974 61012 *N21 / N23F OMEGQPF05 OMEGQPF10 OMESD36 OMESD34 OMECA77B 1 2.8 & 3.0 ENGINES UNIT PRICE $ 2 2 1 1 2 1 LWB MODEL PART NUMBER QTY 2GQ02C 61014 N22F 1 2GQ02AM 61014 *N29 / N22F 1 2GQ02J 60015 N29 1 UNIT PRICE $ 2 2 2 4 2GQ02LP 61014 N29 Do not use Packers 3 GQGK01 2974 61012 *N21 / N23F 1 2972 60013 N21 1 UNIT PRICE $ 2 2 1 1 SWB MODEL LPG CONVERSION SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER TRIM PACKER GEAR BOX PACKER KIT QTY NOT APPLICABLE OMEGQPF05 1 OMEGQPF10 OMESD36 5 OMESD34 2 OMECA77B 2 5 PART NUMBER 1 2 1 PART NUMBER QTY 2GQ02CM 61014 N22F 1 UNIT PRICE $ 2 2GQ02C 61014 *N29 / N22F 1 2 2GQ02G 60015 N29 1 2 LPG CONVERSION 4 2GQ02LP 61014 N29 Do not use Packers 3 GQGK01 1 2 1 REMARKS: 1 Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil. Packers must be installed to the top on rear coils and to the bottom on front coils. 2 OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if OMECA77B kit is required. 3 Gearbox Packer Kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. 4 LPG conversion equated to 100-125 litre rear mounted gas tank and a 70-75 litre mid mounted auxiliary petrol tank. 5 OMESD36 fits 8/89 On Models. OMESD34 fits pre 8/89 Models. Page 53 OME NO.28 INT JULY 2012 NISSAN PATROL GQ Y60 CAB CHASSIS COIL SPRING MODELS FRONT Estimated Lift: 50mm SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER TRIM PACKER STEERING DAMPER CASTER KIT 4.2 ENGINES PART NUMBER QTY 2975 61012 N23F 1 Estimated Lift: 40 - 50mm SPRING: MEDIUM LOAD 40mm LIFT NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER TRIM PACKER GEAR BOX PACKER KIT 2 2976 60013 N21 OMEGQPF05 OMEGQPF10 OMESD36 OMECA77B REAR UNIT PRICE $ 1 2 1 2 1 1 ALL MODELS PART NUMBER 2GQ02C QTY 3 61014 N22F 2GQ02J 60015 N29 OMEGQPR05 OMEGQPR10 GQGK01 UNIT PRICE $ 1 2 3 1 2 1 4 1 REMARKS: 1 Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil. Packers must be installed to the top on rear coils and to the bottom on front coils. 2 OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if OMECA77B kit is required. 3 Include tray weight in constant load calculation. 4 Gearbox Packer Kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. Page 54 OME NO.28 INT JULY 2012 NISSAN PATROL GQ Y60 UTE & CAB CHASSIS LEAF SPRING MODELS FRONT Estimated Lift: 30mm SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT GREASABLE SHACKLE KITS STEERING DAMPER CENTRE BOLT SPACER KIT REAR Estimated Lift: 45mm SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 600 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT GREASABLE SHACKLE KITS U BOLTS ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT 4.2 ENGINE PART NUMBER CS003F 60068 N28 QTY 1 UNIT PRICE $ REMARKS: 1 CBS02 x 2 centre bolt spacers required 2 for front spring fitment. 2 CS004F 60068 N28 OMESB1 OMEGS2 OMEGP2 OMESD22 CBS02 1 2 FK08 Anti Inversion Kit is mandatory fitment if greasable shackles are not fitted. Refer OME Technical & Fitting Manual. 2 2 2 1 3 Include tray weight in constant load 1 4 Remove 3rd leaf for vehicles requiring calculation. 400kg constant load springs. 1 2 1 ALL MODELS PART NUMBER CS016RA/B 60054 N25 2 CS016RA/B 60054 N25 OMESB64 OMEGS1 OMEGP2 OMEU58B FK08 D15XL UCB11 3 QTY 4 UNIT PRICE $ 1+1 2 2 3 1+1 2 2 1 2 4 1 2 2 Page 55 OME NO.28 INT JULY 2012 NISSAN PATROL MQ 260 LWB SPANISH BUILT ALL 2.8TD MODELS FRONT Estimated Lift: 30 - 40mm PETROL & DIESEL ENGINES PART NUMBER SPRING: TO 50 KGS NITROCHARGER CS016F *N19 / N19C SPRING: 51-100 KGS NITROCHARGER CS016F N19 OMESB3 OMESB29 OMEU56 OMEU57 SPRING BUSH KIT U BOLTS REAR Estimated Lift: 50mm QTY 1 from top of spring. 2 Front U Bolt: OMEU56 fits to right hand side. OMEU57 fits to left hand side. 2 2 2 ALL MODELS QTY SPRING: MEDIUM LOAD NITROCHARGER CS011R N89 SPRING: CONSTANT 200 KGS NITROCHARGER CS012R *N42 / N89 OMESB2 OMESB29 OMEU58 2 2 2 2 U BOLTS 1 To improve ride quality remove 3rd leaf 2 2 2 2 PART NUMBER SPRING BUSH KIT UNIT REMARKS: PRICE $ UNIT PRICE $ 2 4 Page 56 OME NO.28 INT JULY 2012 NISSAN PATROL MQ M60 ALL MODELS FRONT PETROL & DIESEL ENGINES Estimated Lift: 30 - 40mm SPRING: TO 50 KGS NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPRING BUSH KIT U BOLTS STEERING DAMPER EXTRA LEAF CENTRE BOLT REAR PART NUMBER QTY CS010FA / B 1 EARLY *N47/N96 LATE N49 1+1 CS011FA / B 1 EARLY *N47/N96 LATE N49 OMESB28 2 OMESB29 OMESB31 2 OMESB29 OMEU56 4 OMEU57 OMESD22 5 D11XL UCB5 1+1 UNIT PRICE $ 2 2 2 2 1 2 2 ALL MODELS Estimated Lift: 50mm PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER CS011R N97 SPRING: CONSTANT 200 KGS NITROCHARGER CS012R N48 OMESB2 OMESB29 OMEU58 D12XL UCB1 2 2 2 2 SPRING BUSH KIT U BOLTS EXTRA LEAF CENTRE BOLT 3 UNIT PRICE $ 2 4 2 2 REMARKS: 1 Models with P40 4 litre engine require CS011FA / B springs. Individual vehicles fitted with A / B fitment may experience a pronounced trimming problem to right hand side. In these cases fitment of an XL leaf to the right hand side will correct problem. 2 Front Spring Bushes: Early model (round headlight) require OMESB28 and OMESB29. Late model (square headlight) require OMESB31 and OMESB29. 3 OME Bush Kits must be used to enable springs to be fitted. 4 Front U Bolt: OMEU56 fits to right hand side OMEU57 fits to left hand side 5 D11XL suitable for CS010FA / B. Page 57 OME NO.28 INT JULY 2012 NISSAN NAVARA D40 2005 ON ALL MODELS (USA - NISSAN FRONTIER) FRONT Estimated Lift: 20 - 30mm DIESEL & V6 PETROL PART NUMBER QTY SPRINGS: TO 40 KGS STRUT - SPORT STRUT 2607 90003 N183S 1 SPRINGS: 41 TO 80 KGS STRUT - SPORT STRUT 2608 90003 N183S REAR Estimated Lift: 40mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT GREASABLE SHACKLE KIT U BOLTS EXTRA LEAF CENTRE BOLT 1 V6 TURBO DIESEL UNIT PRICE $ 2 QTY 2608 90003 N183S 1 1 UNIT PRICE $ 2 UNDER DEVELOPMENT 1 1 PART NUMBER 2 ALL MODELS REMARKS: OE plastic stone shield must be UNIT refitted. No top mounting bushes PRICE $ supplied, re-use OE bushes. 1 PART NUMBER CS150R 60017 N185 OMESB99 OMESB100 QTY 3 2 2 CS151R *60110 / 60017 N185 OMESB99 OMESB100 OMEGS15 OMEU53A D31XL UCB19 2 2 3 2 2 2 2 2 1 4 2 2 4 2 Use: OMESB99 with OE Shackles. OMESB100 when installing OMEGS15. 3 Include tray weight in constant load calculation. 4 OE U bolt plate bolt holes may need to be enlarged when fitting OME U bolts. NAVARA D22 10/2002 ON ALL MODELS NP300 2008 ON ALL MODELS FRONT TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 30mm PART NUMBER 303007 60034 N151 QTY UNIT PRICE $ REMARKS: 1 1 1 Raise or lower front end clearance and trim 2 2 vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. ALL MODELS PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER CS032R 60035 N56 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT EXTRA LEAF CENTRE BOLT CS031R 60035 N59 OMESB91 OMEU63 OMEGS21 D18XL UCB14 QTY 4 2 2 3 2 2 5 2 4 1 2 2 Page 58 UNIT PRICE $ 2 It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. 3 Include tray weight in constant load calculation. For constant 400kg loads, add D18XL to CS031R. 4 CS032R has a 25mm lower cambered 2nd stage for improved ride quality, however under heavy load this will cause the ride height to be 25mm lower. 5 FK01 U Bolt Thread Spacer Kit requied on all cab chassis Models. OME NO.28 INT JULY 2012 NISSAN NAVARA D21 & D22 TO 8/2002 ALL MODELS FRONT TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER REAR Estimated Lift: 30mm QTY UNIT PRICE $ REMARKS: 1 1 1 2 2 3 1 PART NUMBER 303007 303008 60021 N58 OMESD35 Important: A minimum of 60mm of droop must be maintained. ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER CS030R 60035 N56 2 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS EXTRA LEAF CENTRE BOLT CS031R 60035 N59 OMESB81 OMEU63 D18XL UCB14 UNIT PRICE $ 2 It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. 3 On later Models steering damper was not fitted. Check vehicle to confirm it does have an original steering damper fitted. 4 For constant 400kg loads, add D18XL to CS031R. Include tray weight in constant load calculation. 2 4 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. 303007 suits D22 & 303008 suits D21 Models. 2 2 2 4 2 2 PATHFINDER R51 2005 ON (NOT USA MANUFACTURED MODEL) FRONT Estimated Lift: 30mm DIESEL & V6 PETROL PART NUMBER QTY SPRING: TO 40 KGS STRUT - SPORT STRUT 2607 90003 N183S 1 SPRING: 41 TO 100 KGS STRUT - SPORT STRUT 2608 90003 N183S REAR Estimated Lift: 30mm 1 UNIT REMARKS: PRICE $ 1 OE plastic stone shield must be refitted and a 4 Wheel alignment must be carried out after fitment of OME suspension. No top mounting bushes supplied, re-use OE bushes. 2 1 1 2 ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2609 60016 N184 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2610 60016 N184 1 UNIT PRICE $ 2 2 Page 59 OME NO.28 INT JULY 2012 NISSAN PATHFINDER R50 1996 - 2005 V6 MODELS FRONT Estimated Lift: 15mm SPRING: NO ACCESSORIES SPRING: TO 50 KGS SPRING: 51 TO 100 KGS STRUT FITTING KIT REAR Estimated Lift: 20mm SPRING: MEDIUM LOAD NITROCHARGER V6 MODEL PART NUMBER 2921 2923 2928 N145S + N146S SMP638 2 QTY 3 2 UNIT PRICE $ 1 1 1 1+1 1 ALL MODELS PART NUMBER QTY 2922 N61 N104 1 1 UNIT PRICE $ 2 REMARKS: 1 N61: Suit Models To 1/'99. N104: Suit Models from 2/'99 On. 2 Vehicles with ABS will require ABS Bracket Kit SMP638. N146S Right Hand Side x 1 N145S Left Hand Side x 1 No top mounting bushes supplied, re-use OE bushes. 3 PATHFINDER TO LATE 1995 ALL MODELS FRONT PART NUMBER TORSION BARS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER REAR Estimated Lift: 20mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 60031 N26F OMESD35 QTY UNIT PRICE $ 1 2 2 1 ALL MODELS PART NUMBER QTY 2920 *60064 / 60032 *N42 / N89 1 UNIT PRICE $ 2 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 2 It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. Page 60 OME NO.28 INT JULY 2012 NISSAN TERRANO II R20 1996 - 2005 FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 20mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 60031 *N65 / N26F QTY UNIT PRICE $ 1 2 2 ALL MODELS PART NUMBER QTY 2920 60058 N30 1 UNIT PRICE $ 2 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. 2 It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. XTERRA 2005 ON MODELS FRONT Estimated Lift: 30mm V6 PETROL ENGINE PART NUMBER QTY SPRINGS: TO 40 KGS STRUT - SPORT STRUT 2607 90003 N183S 1 SPRINGS: 41 TO 80 KGS STRUT - SPORT STRUT 2608 90003 N183S REAR Estimated Lift: 30mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT GREASABLE SHACKLE KIT U BOLTS FITTING KIT EXTRA LEAF 1 UNIT PRICE $ 2 1 1 2 ALL MODELS PART NUMBER CS061R 60017 N185 OMESB99 OMESB100 OMEGS15 OMEU72 FK42 D37XL QTY 4 2 3 2 2 2 2 1 4 1 2 3 4 UNIT PRICE $ REMARKS: 1 No top mounting bushes supplied, re-use OE bushes. 2 OMESB99 suits factory shackles. OMESB100 suits OMEGS15 Greasable Shackle Kit. 3 FK42 is a mandatory fitment to space sway bar link away from shock absorber. 4 CS061R with D37XL provides approximately 60mm lift over factory with no additional rear load. CS061R with D37XL provides approximately 30mm lift over factory with constant 200kg additional rear load. Page 61 OME NO.28 INT JULY 2012 SSANGYONG MUSSO, SPORT UTILITY & KORANDO 1995 - 2005 FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS NITROCHARGER SPORT NITROCHARGER 60031 N65 REAR Estimated Lift: 40mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER QTY UNIT PRICE $ 2 ALL MODELS PART NUMBER QTY 2937 1 UNIT PRICE $ UNDER DEVELOPMENT N118 2 SUZUKI GRAND VITARA 4 DOOR 08/2005 - 2008 FRONT Estimated Lift: 20mm SPRING: TO 35 KGS STRUT PETROL V6 (2.7) DIESEL (1.9) PART NUMBER 2623 N217S + N218S REAR Estimated Lift: 20mm SPRING: MEDIUM LOAD NITROCHARGER QTY 1 PETROL 4 CYLINDER (2.0) UNIT PRICE $ 2624 N217S + N218S 1 1+1 ALL MODELS PART NUMBER QTY 2625 OME036 1 2 PART NUMBER QTY 1 UNIT PRICE $ 1 1+1 REMARKS: UNIT PRICE $ 1 N217S Left Hand Side. N218S Right Hand Side. GRAND VITARA TO 2005 FRONT Estimated Lift: 30mm PETROL 4 & 6 CYLINDER ENGINE PART NUMBER QTY SPRING: TO 35 KGS STRUT 2959 N103S SPRING: 36 TO 75 KGS STRUT 2962 N103S 1 2 1 2 REAR Estimated Lift: 30mm SPRING: MEDIUM LOAD NITROCHARGER UNIT PRICE $ QTY 2961 N105 1 2 Page 62 PART NUMBER QTY 2962 N103S 1 2 1 2 2962 N103S ALL MODELS PART NUMBER DIESEL ENGINE 1 UNIT PRICE $ REMARKS: UNIT PRICE $ 1 Coil packer OMESJR10 can be used to increase ride height. OME NO.28 INT JULY 2012 SUZUKI VITARA WAGON 1988 - 2005 FRONT Estimated Lift: 25 - 30mm V6 PETROL ENGINE PART NUMBER QTY SPRING: TO 35 KGS STRUT 2950 N103S SPRING: 36 TO 75 KGS STRUT 2959 N103S 1 2 1 2 REAR Estimated Lift: 30mm UNIT PRICE $ ALL MODELS PART NUMBER QTY SPRING: LIGHT LOAD NITROCHARGER 2954 N105 SPRING: MEDIUM LOAD NITROCHARGER 2955 N105 1 2 1 2 UNIT PRICE $ VITARA WAGON 1988 - 2005 FRONT Estimated Lift: 30mm 4 CYLINDER PETROL ENGINE PART NUMBER QTY SPRING: TO 35 KGS STRUT 2960 N103S SPRING 36 TO 75 KGS SPRING: STRUT 2953 N103S 1 2 1 2 REAR Estimated Lift: 30mm UNIT PRICE $ ALL MODELS PART NUMBER QTY SPRING: LIGHT LOAD NITROCHARGER 2954 N105 SPRING: MEDIUM LOAD NITROCHARGER 2955 N105 1 2 1 2 UNIT PRICE $ VITARA SWB TO 2005 FRONT Estimated Lift: 30mm SPRING: TO 35 KGS STRUT REAR Estimated Lift: 30mm SPRING: MEDIUM LOAD NITROCHARGER 4 CYLINDER PETROL ENGINE PART NUMBER 2951 N103S QTY 1 UNIT PRICE $ 1 2 ALL MODELS PART NUMBER 2952 N32 QTY 2 1 2 Page 63 REMARKS: UNIT PRICE $ 1 Front strut has 40mm longer travel than original equipment. 2 Rear shock has 50mm longer travel than original equipment. OME NO.28 INT JULY 2012 SUZUKI XL7 WAGON 2001 - 2005 FRONT PETROL ENGINE Estimated Lift: 25mm SPRING: NO ACCESSORIES STRUT BUMP STOP SPACER KIT REAR PART NUMBER QTY 2956 N103S FK28 1 2 1 1 DIESEL ENGINE UNIT PRICE $ PART NUMBER QTY 2962 N103S FK28 1 2 1 1 UNIT PRICE $ ALL MODELS Estimated Lift: 35mm SPRING: MEDIUM LOAD NITROCHARGER PART NUMBER QTY 2968 N105 1 2 UNIT PRICE $ REMARKS: 1 FK28 Bump Stop Spacer Kit is a mandatory fitment with N103S Struts. EQUATOR (US MARKET ONLY) FRONT DIESEL & V6 PETROL Estimated Lift: 30mm PART NUMBER QTY SPRINGS: TO 40 KGS STRUT - SPORT STRUT 2607 90003 N183S 1 SPRINGS: 41 TO 80 KGS STRUT - SPORT STRUT 2608 90003 N183S REAR SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER GREASABLE SHACKLE KIT U BOLTS 2 1 1 2 ALL MODELS Estimated Lift: 40mm SPRING BUSH KIT 1 UNIT PRICE $ PART NUMBER CS150R 60017 N185 OMESB99 OMESB100 CS151R 60017 N185 OMESB95 OMESB96 OMEGS15 OMEU53A QTY 2 UNIT PRICE $ 2 2 2 2 2 2 2 2 2 2 1 4 3 REMARKS: 1 OE plastic stone shield must be refitted. No top mounting bushes supplied, re-use OE bushes. 2 CS150R: Use: CS051R: Use: 3 OE U Bolt plate bolt holes may need to be enlarged when fitting OME U Bolts. OMESB99 with OE Shackles. OMESB95 with OE Shackles. OMESB100 when installing OMEGS15. OMESB96 when installing OMEGS15. Page 64 OME NO.28 INT JULY 2012 SUZUKI SIERRA / SAMURAI ALL LEAF SPRING MODELS (SJ413) STD TRACK : 1984 - 1988 SJ50 SWB SJ51 LWB WIDE TRACK : 1988 - 1996 SJ70 SWB (also fits MG410) SJ71 LWB (also fits MG410WT) Note: MG410 & MG10WT are Indian built LWB Models. FRONT Estimated Lift: 40mm 1.0 LITRE PART NUMBER SPRING: TO 25 KGS NITROCHARGER CS012FA / B OME015 SPRING: 26 TO 75 KGS NITROCHARGER CS013FA / B OME025 OMESB19 OMESB25 Required FK06 TP05 OMESD30 D20XL UCB7 SPRING BUSH U BOLTS FITTING KIT TRIM PACKER STEERING DAMPER EXTRA LEAF CENTRE BOLT REAR Estimated Lift: 40mm QTY 5 5 2 3 4 1 6 UNIT PRICE $ PART NUMBER CS012FA / B OME025 1+1 2 1+1 2 1 4 1.3 LITRE CS013FA / B OME025 OMESB19 OMESB25 Required FK06 TP05 OMESD30 D20XL UCB7 1 2 2 QTY 5 5 1+1 2 1+1 2 1 2 3 4 1 4 6 UNIT PRICE $ 1 2 2 ALL MODELS PART NUMBER QTY CS038R OME013 N43 2 SPRING: MEDIUM LOAD NITROCHARGER SPRING: CONSTANT 100 KGS NITROCHARGER SPRING BUSH KIT U BOLTS TRIM PACKER EXTRA LEAF CENTRE BOLT CS039R OME013 N43 OMESB19 OMESB25 Required TP05 D21XL UCB7 2 UNIT PRICE $ 2 2 2 2 1 2 3 4 2 2 REMARKS: 1 OMESB19 Bush Kit fits all Models except LJ50. OMESB25 Bush Kit only fits Model LJ50. 2 OME013 fits all Models except LJ80 and LJ80 II. N43 fits all LJ80 and LJ80 II Models. 3 88 To '96 1300cc Wide Track Models: Front: D/S OMEU61 x 1, OMEU61B x 1 Rear: OMEU60 x 4 P/S OMEU60 x 2 84 To '88 1300cc STD Track Models: Front: D/S OMEU61 x 1, OMEU61B x 1 Rear: OMEU62 x 4 P/S OMEU62 x 2 81 To '87 1000cc Models: D/S OMEU61 x 1, OMEU61B x 1 Front: Rear: OMEU60 x 4 P/S OMEU60 x 2 4 FK06 kit required for Model with OE stabiliser bar. Refer OME Technical & Fitting Manual. 5 IMPORTANT: Sierras used in extreme heavy off road use eg. station mustering must have CS013FA + B installed. 6 D20XL is suitable for C012FA / B. Page 65 OME NO.28 INT JULY 2012 SUZUKI SANTANA SAMURAI TO 2004 SWB & LWB MODELS FRONT Estimated Lift:30 - 40mm 1.3 LITRE PETROL PART NUMBER SPRING: TO 25 KGS - 40mm NITROCHARGER CS012FA / B OME034 SPRING: 26 TO 75 KGS XL LEAF NITROCHARGER SPRING BUSH CS013FA / B D20XL OME034 OMESB19 OE U BOLTS STEERING DAMPER TRIM PACKER REAR Estimated Lift: 40mm 2 1 2 UNIT PRICE $ PART NUMBER CS013FA / B OME034 1+1 2 1+1 2 2 2 CS013FA / B D20XL OME034 OMESB19 OE PART NUMBER SPRING: CONSTANT 100KGS XL LEAF NITROCHARGER SPRING BUSH KIT CS039R OME035 OMESB19 OE OMEU60 TP05 2 2 2 1 UNIT PRICE $ 1+1 2 1+1 2 2 2 4 4 1 LWB MODEL UNIT PRICE $ PART NUMBER CS039R OME035 2 2 2 CS039R D21XL OME035 OMESB19 OE OMEU60 TP05 2 2 2 2 OMEU60 OMEU61 LHS RHS 3 OMESD30 TP05 1 QTY QTY 2 2+2 SWB MODEL CS038R OME035 TRIM PACKER 2 OMEU60 OMEU61 LHS RHS OMESD30 3 TP05 SPRING: MEDIUM LOAD NITROCHARGER U BOLTS QTY 1.9 LITRE DIESEL 4 QTY 2 2 4 2 UNIT PRICE $ 2 2 2 2 2 2 4 REMARKS: 1 Fitment of XL Leaf D20XL is recommended for weight in excess of 26kg on diesel Model & 75kg on petrol Model. 2 Front: LHS: OMEU60 x 2, RHS: OMEU61B x 2 required when fitting CS013FA/B Rear: OMEU60 x 4 required when fitting CS039R 3 OMESD30 can be fitted to Models which have an OE steering damper. 4 Fitment of XL leaf D21XL is recommended for LWB Models with constant 100kg rear weight or OE hard top. JIMNY SN413 FRONT Estimated Lift: 40mm 4 CYLINDER PETROL ENGINE PART NUMBER QTY SPRING: TO 35 KGS NITROCHARGER 2963 OME028 SPRING: 36 TO 85 KGS NITROCHARGER 2965 OME028 1 2 1 2 REAR Estimated Lift: 40mm SPRING: NITROCHARGER TRIM PACKER UNIT PRICE $ 2966 2967 OME029 OMESJR10 QTY 1 1 2 Page 66 PART NUMBER QTY 2965 OME028 1 2 1 2 2969 OME028 ALL MODELS PART NUMBER DIESEL ENGINE UNIT PRICE $ REMARKS: UNIT PRICE $ 1 2966 suits right hand drive Models with a 20mm higher right hand side coil. 2967 suits left hand drive Models with equal height coils. If uncertain, compare original coil heights. OME NO.28 INT JULY 2012 TOYOTA LANDCRUISER 200 SERIES WAGON* FRONT Estimated Lift: As Below SPRING: NO WEIGHT: 25mm LIFT STRUT - SPORT STRUT SPRING: 100 KGS: 25mm LIFT STRUT - SPORT STRUT SPRING: N0 WEIGHT: 50mm LIFT STRUT - SPORT STRUT SPRING: 100 KGS: 50mm LIFT STRUT - SPORT STRUT COIL PACKER REAR Estimated Lift: As Below SPRING: MEDIUM LOAD: LESS 20mm NITROCHARGER SPORT NITROCHARGER SPRING: MEDIUM LOAD: NO LIFT NITROCHARGER SPORT NITROCHARGER SPRING: MEDIUM LOAD: 20mm LIFT NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 200 KGS: 20mm NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 400 KGS: 20mm NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 600 KGS: 20mm NITROCHARGER SPORT NITROCHARGER TRIM PACKER STONE GUARD KIT ALL V8 DIESEL ENGINES PART NUMBER QTY 2700 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 90017 N208S 2701 91005 N208S 2702 90017 N208S 2703 91005 N208S OME95PF5 UNIT PRICE $ V8 PETROL ENGINE PART NUMBER QTY 2704 1 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 90017 N208S 2705 91005 N208S 2700 90017 N208S 2701 91005 N208S OME95PF5 3 ALL MODELS PART NUMBER QTY 2720 1 61029 N209 2 2721 1 61029 N209 2 2722 1 61029 N209 2 2723 1 61030 N210 2 2724 1 61030 N210 2 2725 1 2 4 3 SELECTION HINTS: *For Fitment to Models with Toyota's KDSS (Kinetic Dynamic Suspension System) fitted, please refer to OME's Fitting Hints & Tips (OME Bulletin 70 LC200 KDSS Fitting g Hints). ) UNIT PRICE $ REMARKS: 1 OME Coils and strut can only be installed together due to different winding of the lower coil end to suit the OME coil seat. They are not compatible with the OE Coil Seat. Due to the nature of the KDSS, Models fitted with KDSS may experience a characteristic 10mm to 15mm lean to the front right hand side. 2 No top mounting bushes supplied, reuse OE bushes. 3 To maintain ride height when front accessory weight exceeds 100kgs, OME95PF5 coil packer should be installed, each OME95PF5 will increase ride height by 10mm. 4 61030 N210 OME80PR05 OME80PR10 OME661 UNIT PRICE $ OME661 Lower Shock Stone Guards are recommended fitment for protection against stone damage. 1 Page 67 OME NO.28 INT JULY 2012 TOYOTA LANDCRUISER 100 SERIES INDEPENDENT FRONT SUSPENSION FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS: OVER 75 KGS NITROCHARGER SPORT NITROCHARGER 303001 1 303002 *60001 / 60000 *N199 / N133 / N100 FITTING KIT FK27 REAR Estimated Lift: 10mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 5 QTY 1 2 1 ALL MODELS 10/2000 ON PART NUMBER QTY 2860 60002 *N200 / N101 1 2 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2863 *60003 / 60002 *N200 / N101 1 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER 2864 60003 N200 1 SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER TRIM PACKER STONE GUARD KIT UNIT PRICE $ 2866 2862 60002 *N200 / N101 OME80PR05 OME80PR10 OME661 2 2 4 1 2 2 3 1 UNIT PRICE $ 10/98 TO 2000 V8 MODELS PART NUMBER QTY 2865 60002 *N200 / N101 1 2 2866 *60003 / 60002 *N200 / N101 1 - - OME80PR05 OME80PR10 OME661 UNIT PRICE $ 2 2 3 1 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. It is important that a minimum of 60mm of droop is maintained to prevent topping out of the front shock absorbers. 303001 suits V8 Models. 303002 suits Turbo Diesel Models. NB: In some Middle Eastern Countries, 6 Cylinder Petrol LandCruiser 100 Series (IFS) use the longer turbo diesel torsion bars. 2 Packers must be installed on top of coils. 3 SPORT/NITROCHARGER FITMENT: OME661 or OME662 (suits 40mm diameter control arms) Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. 4 Original rear rake is 60mm approximately with OE coil rates of 145lbs/in or 25.5N/mm. Customers wishing to lower the rear height but increase the load carrying ability can select from: 2866 - Reduces OE height by 10mm (rates 240 - 300lbs/in, 42 - 52.5N/mm) 2862 - Reduces OE height by 30mm (rates 240lbs/in, 42N/mm) 5 Due to the common problem of the lower control arm cracking when driven under hard conditions, the fitment of a FK27 Lower Control Arm Reinforcing Bracket Kit is strongly recommended. Page 68 OME NO.28 INT JULY 2012 TOYOTA LANDCRUISER 105 SERIES & 80 SERIES WAGONS LIVE AXLE FRONT SUSPENSION MODELS FRONT Estimated Lift: 10 - 50mm SPRING: TO 50 KGS - 50mm NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KG-50mm NITROCHARGER SPORT NITROCHARGER SPRING: TO 110 KGS - 10mm NITROCHARGER SPORT NITROCHARGER TRIM PACKER STEERING DAMPER CASTER KIT REAR Estimated Lift: 20 - 50mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER PETROL & DIESEL ENGINES PART NUMBER QTY 2851 60018 *N73 / N70 1 2861 60070 N73 OME80PF05 OME80PF10 OMESD24 OMECA77B 1 2 3 2 1 1 QTY 2860 60020 *N74E / N71E 1 2864 60071 N74E SPRING: CONSTANT 600 KGS NITROCHARGER SPORT NITROCHARGER 2868 60071 N74E SPRING: MEDIUM 20mm LIFT NITROCHARGER SPORT NITROCHARGER 2862 60020 *N74E / N71E OME80PR05 OME80PR10 OME661 Estimated Lift: 50mm 2 PART NUMBER SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER REAR 1 1 ALL MODELS 2863 60020 N74E STONE GUARD KIT 2 1 2850 *60070 / 60018 N73 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER TRIM PACKER 1 1 1 UNIT PRICE $ 1 3 Packers must be installed on the top 2 1 of coil springs. 4 OME662 or OME661 Lower Shock 1 Mount Stone Guard is recommended fitment to protect against severe stone pepppering encountered on loose road surfaces. OME662 will only fit Models with 40mm diameter control arms. 2 1 20mm to lift height shown which is based on average for petrol and diesel engines. caster angle by 3o. Check manufacturer's specifications to determine if OMECA77B kit is required. 2 1 1 For Models built from 8/1991 add 2 OMECA77B Caster Kit will increase 1 1 2 3 4 1 LPG CONVERSION QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2860 60020 *N74E / N71E 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2863 60020 N74E OME80PR05 OME80PR10 OME661 STONE GUARD KIT REMARKS: 2 PART NUMBER TRIM PACKER UNIT PRICE $ 1 UNIT PRICE $ 2 1 1 2 3 4 1 Page 69 OME NO.28 INT JULY 2012 OFF ROAD USE ONLY - TOYOTA LANDCRUISER 80 & 105 SERIES 7 FRONT PART NUMBER QTY UNIT PRICE $ COMMENTS COILS 75mm LIFT - SPRING TO 50KG 75mm LIFT - SPRING 51 TO 110KG 100mm LIFT - SPRING TO 50KG 100mm LIFT - SPRING 51 TO 110KG 125mm LIFT - SPRING TO 50KG 300 lbf/in 2418 3039 2419 3051 2420 1 1 1 1 1 220 lbf/in 300 lbf/in 220 lbf/in 300 lbf/in 60070L 2 Suits 75mm &100mm coils OMESD24 1 SHOCKS NITROCHARGER SPORT STEERING DAMPER STABILISER COMPONENTS ADJUSTABLE PANHARD ROD COIL SPRING TRIM PACKER COIL SPRING TRIM PACKER REAR PANR007 PAN3050 OME80PF05 OME80PF10 RHD only - available Oct 2012 LHD only - available Oct 2012 5mm 1 10mm PART NUMBER QTY UNIT PRICE $ COMMENTS COILS 75mm LIFT - MEDIUM 75mm LIFT - CONSTANT 200KG 75mm LIFT - CONSTANT 400KG 100mm LIFT - MEDIUM 100 100mm LIFT - CONSTANT 200KG 100mm LIFT - CONSTANT 400KG 125mm LIFT - MEDIUM 2421 3040 3049 2422 3043 3052 2423 1 1 1 1 1 1 1 280 lbf/in 60071L 2 Suit 75mm & 100mm coils PANR008 LTA3043 UTA3036 OME80PR05 OME80PR10 1 1 1 RHD & LHD - available Oct 2012 250 lbf/in 320 lbf/in 280 lbf/in 250 lbf/in lbf/i 320 lbf/in 280 lbf/in SHOCKS NITROCHARGER SPORT COMPONENTS ADJUSTABLE PANHARD ROD HEAVY DUTY LOWER TRAILING ARMS ADJUSTABLE UPPER TRAILING ARMS TRIM PACKER Standard Length - available Nov 2012 40mm on car adjustable - avail. Nov 12 5mm, MUST be installed top of coil 10mm, MUST be installed top of coil Notification: Modifications for off - road use only The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for public road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by the customer. Modifications and replacement of other associated components will be required. Lift increase is approximate and will depend on vehicle weights. Warranty Implications The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent any future misunderstanding. Page 70 OME NO.28 INT JULY 2012 TOYOTA PRADO 150 SERIES 2009 ON LWB4 COIL SPRUNG MODELS ONLY FRONT Estimated Lift: 30mm V6 4.0L PETROL ENGINE PART NUMBER SPRING: NO BAR STRUT - SPORT 2883 90010 SPRING: BAR ONLY STRUT - SPORT 2883 90010 1 QTY 5 2 1 2 UNIT PRICE $ 2869 90010 2869 90010 OME95PF5 FRONT V6 4.0L PETROL ENGINE Estimated Lift: 50mm 2869 90010 SPRING: BAR ONLY STRUT - SPORT 2884 90010 REAR Estimated Lift: 30mm SPRING: MEDIUM LOAD NITROCHARGER SPORT QTY 1 2 1 2 2885 90010 OME95PF5 1 2 PART NUMBER QTY SPRING: CONSTANT 200 KGS NITROCHARGER SPORT 2895 *60081 / 60080 3 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT TRIM PACKER STONE GUARD KIT 2896 60081 OME150PR10 OME661 SPRING: MEDIUM LOAD NITROCHARGER SPORT 1 2 1 2 1 2 UNIT PRICE $ 1 2 1 2 1 2 1 3.0L DIESEL ENGINE PART NUMBER 2884 90010 1 2 1 2 1 2 QTY 2885 90010 2887 90010 OME95PF5 QTY 1 2 1 2 1 2 UNIT PRICE $ 1 2 1 2 1 2 1 LWB MODELS 3 Estimated Lift: 50mm UNIT PRICE $ 1 2895E 60080 REAR 2884 90010 OME95PF5 1 PART NUMBER SPRING: NO BAR STRUT - SPORT SPRING: BAR AND WINCH STRUT - SPORT TRIM PACKER 2 PART NUMBER 2883 90010 1 2 1 2 1 2 SPRING: BAR AND WINCH STRUT - SPORT TRIM PACKER 1 3.0L DIESEL ENGINE 3 1 2 1 2 1 2 3 1 UNIT PRICE $ LWB MODELS PART NUMBER QTY 2889 60080 3 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT 2898 *60081 / 60080 3 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT TRIM PACKER STONE GUARD KIT 2899 60081 OME150PR10 OME661 3 1 2 1 2 1 2 3 1 UNIT PRICE $ REMARKS: 1 Vehicles with KDSS, must have 1 x OME95PF5 packer installed on the front right hand side to maintain correct trim. 2 No top mounting bushes supplied, re-use OE bushes. 3 OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. 4 For Fitment to Models with Toyota's KDSS (Kinetic Dynamic Suspension System) fitted, please refer to OME's Fitting Hints & Tips (OME Bulletin 70 LC200 KDSS Fitting Hints). 5 When 2883 fitted to Petrol Model ride height increase will be approximately 40mm. Page 71 OME NO.28 INT JULY 2012 TOYOTA PRADO 150 SERIES SWB 2009 ON COIL SPRUNG MODELS ONLY FRONT Estimated Lift: 40mm SPRING: NO BAR STRUT - SPORT SPRING: BAR ONLY STRUT - SPORT SPRING: BAR AND WINCH STRUT - SPORT TRIM PACKER REAR Estimated Lift: 40mm V6 4.0L PETROL ENGINE PART NUMBER QTY 2883 90016 2 2869 *90010 / 90016 2 2884 90010 OME95PF5 2 1 2 1 2 1 2 PART NUMBER QTY 2869 90016 2 2884 *90010 / 90016 2 2885 90010 OME95PF5 1 2 UNIT PRICE $ 1 2 1 2 1 2 1 WAGON MODELS PART NUMBER QTY 2895E 60086 3 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT 2895 *60080 / 60086 3 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT TRIM PACKER STONE GUARD KIT 2896 60080 OME150PR10 OME661 SPRING: MEDIUM LOAD NITROCHARGER SPORT UNIT PRICE $ 3.0L DIESEL ENGINE 3 1 2 1 2 1 2 3 1 UNIT PRICE $ REMARKS: 1 V hi l with ith KDSS, KDSS mustt have h k installed i t ll d on th i ht h d side id tto maintain i t i correctt ttrim i Vehicles 1 x OME95PF5 packer the ffrontt right hand 2 No top mounting bushes supplied, re-use OE bushes. 3 OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. Page 72 OME NO.28 INT JULY 2012 TOYOTA PRADO 120 SERIES 4/2003 - 2009 LWB & SWB EXCEPT TEMS MODEL (ELECTRONICALLY MODULATED SUSPENSION) FRONT Estimated Lift: 25mm PETROL & DIESEL ENGINES PART NUMBER SPRING: TO 50 KGS STRUT - SPORT STRUT 2883 *90000 / 90021 *N140S / N139S SPRING: 51 TO 100 KGS STRUT - SPORT STRUT 2884 90000 *N201S / N140S SPRING: 101 TO 150 KGS STRUT - SPORT STRUT TRIM PACKER REAR Estimated Lift: 40mm 2885 90000 N201S OME95PF5 SPRING: 150 KGS - 400 KGS NITROCHARGER SPORT NITROCHARGER 2896 *60005 / 60004 *N202 / N142 REAR Estimated Lift: 40mm SPRING: MEDIUM LOAD 2897 60005 N202 OME661 4 2 1 1 4 2 1 1 4 2 QTY 3 1 2 2 UNIT PRICE $ 1 2 2 1 2 2 2 1 SWB MODEL PART NUMBER QTY 2895E 1 NITROCHARGER SPORT NITROCHARGER *60004 / 60112 *N142 / N141 SPRING: 150KGS - 250KGS NITROCHARGER SPORT NITROCHARGER 2895 *60005 / 60004 *N202 / N142 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER STONE GUARD KIT 1 PART NUMBER NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER STONE GUARD KIT 1 UNIT PRICE $ LWB MODEL 2895E 2895 *60004 / 60112 *N142 / N141 SPRING: MEDIUM LOAD QTY 2896 60005 N202 OME661 2 UNIT PRICE $ 2 1 2 2 1 2 2 2 1 REMARKS: 1 To maintain front strut droop it is important front coils are selected as shown. 2 OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. 3 2895E suits LWB Models without OE 2nd fuel tank. 2895 suits LWB Models with OE 2nd fuel tank. 4 No top mounting bushes supplied, re-use OE bushes. 5 Air bag sensors require adjustment, please refer to fitting instructions. Page 73 OME NO.28 INT JULY 2012 TOYOTA PRADO 90 SERIES TO 10/2002 LWB FRONT Estimated Lift: 40mm V6 PETROL ENGINE PART NUMBER SPRING: TO 50 KGS STRUT - SPORT STRUT 2880 90004 N91S / N91SC SPRING: 51 TO 110 KGS STRUT - SPORT STRUT TRIM PACKER 2881 90004 *N91SB / N91S OME95PF5 REAR Estimated Lift: 40mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 1 PART NUMBER 2881 90004 N91S / N91SC 1 1 2882 90004 *N91SB / N91S OME95PF5 1 2 QTY 1 UNIT PRICE $ 1 2 1 1 2 ALL MODELS PART NUMBER QTY 2890 60028 N86 1 2 2891 *60027 / 60028 *N86B / N86 SPRING: CONSTANT 300 KGS NITROCHARGER SPORT NITROCHARGER 2892 60027 *N86B / N86 OME80PF05 OME80PF10 OME661 STONE GUARD KIT UNIT PRICE $ 2 SPRING: CONSTANT 150 KGS NITROCHARGER SPORT NITROCHARGER TRIM PACKER QTY DIESEL ENGINE UNIT PRICE $ REMARKS: 1 To maintain front strut droop it is important front coils are selected as shown. 2 OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. 2 1 2 2 1 2 2 2 1 TUNDRA 2007 ON FRONT Estimated Lift: 60mm PART NUMBER QTY SPRING: NO BAR STRUT 2612 N192S 1 SPRING: BAR ONLY STRUT 2614 N192S 1 SPRING: BAR & WINCH STRUT 2613 N192S 1 UNIT PRICE $ 1 2 1 2 1 2 REMARKS: 1 No top mounting bushes supplied, re- use OE bushes. 2 Models with rear sway bar will require end link modifications to retain sway bar in operation. 3 FK32 Brake Line and ABS Wire Bracket Relocation Kit is a mandatory fitment. REAR Estimated Lift: 60mm SPRING: MEDIUM LOAD NITROCHARGER XL LEAF SPRING BUSH - BONDED RUBBER U BOLTS FITTING KIT GREASABLE SHACKLE KIT PART NUMBER CS055R N193 D28XL SUPPLIED WITH SPRINGS OMEU53B FK32 OE QTY 2 3 2 2 2 UNIT PRICE $ 4 1 Page 74 OME NO.28 INT JULY 2012 TOYOTA FJ CRUISER 2010 ON FRONT Estimated Lift: 50mm SPRING: NO ACCESSORIES NITROCHARGER SPORT SPRING: TO 60 KGS NITROCHARGER SPORT SPRING: 60 TO 120 KGS NITROCHARGER SPORT TRIM PACKER REAR Estimated Lift: 50mm REMARKS: PART NUMBER QTY 2883 *90010 / 90016 1 2884 90010 1 1 2 1 2 1 2 2885 90010 OME95PF5 1 1 2 No top mounting bushes supplied, reuse OE bushes. OME661 lower shock mount guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. ALL MODELS PART NUMBER QTY SPRING: LIGHT LOAD NITROCHARGER SPORT 2895E *60080 / 60086 2 SPRING: MEDIUM LOAD NITROCHARGER SPORT 2895 *60081 / 60080 2 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT STONE GUARD KIT UNIT PRICE $ 2896 60081 OME661 2 UNIT PRICE $ 1 2 1 2 1 2 1 FJ CRUISER 2006 TO 2010 FRONT Estimated Lift: 50mm SPRING: NO ACCESSORIES STRUT - SPORT STRUT SPRING: TO 60 KGS STRUT - SPORT STRUT SPRING: 60 TO 120 KGS STRUT - SPORT STRUT TRIM PACKER REAR Estimated Lift: 50mm REMARKS: PART NUMBER QTY 2883 90000 / 90021 N140S 1 1 2884 90000 N140S 1 1 2885 90000 N140S OME95PF5 1 2 2 No top mounting bushes supplied, reuse OE bushes. OME661 lower shock mount guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. 2 1 1 2 ALL MODELS PART NUMBER QTY SPRING: LIGHT LOAD NITROCHARGER SPORT NITROCHARGER 2895E *60004 / 60112 N141 1 SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2895 *60004 / 60112 N141 1 2896 60081 OME661 1 2 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT STONE GUARD KIT UNIT PRICE $ UNIT PRICE $ 2 2 2 Page 75 OME NO.28 INT JULY 2012 TOYOTA FORTUNER 2004 ON FRONT Estimated Lift: 40mm PART NUMBER QTY SPRING: TO 75 KGS STRUT - SPORT STRUT 2883 *90002 / 90011 *N167S / N166S 1 SPRING: 76 TO 120 KGS STRUT - SPORT STRUT TRIM PACKER 2884 *90002 / 90011 N167S OME95PF5 REAR Estimated Lift: 40mm 1 UNIT PRICE $ 2 1 1 2 ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2802 60078 N191 1 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 2803 60077 N191 UNIT PRICE $ 2 1 2 REMARKS: 1 No top mounting bushes supplied, re-use OE bushes. Page 76 OME NO.28 INT JULY 2012 TOYOTA LANDCRUISER 76 SERIES WAGON FRONT Estimated Lift: 50mm SPRING: TO 60 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 61 TO 120 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER CASTER KIT SWAY BAR SPACER KIT UPGRADED FRONT SWAY BAR REAR Estimated Lift: 50mm SPRING: MEDIUM NITROCHARGER SPORT NITROCHARGER V8 DIESEL ENGINE PART NUMBER QTY 2856 60008 N106 1 2859 60008 N181 OMESD47 OMECA77B FK19 OMESTAB3 1 2 2 1 4 PART NUMBER QTY CS057R 60010 *N197 / N75E 2 5 CS058R *60111 / 60011 N197 SPRING: CONSTANT 800 KGS NITROCHARGER SPORT CS070R 60111 OMESB86 OMESB85 OMEGS19 OMEGP7 FK38 OMEU59D OME661 D35XL OMESTAB2 FK45 FK44 FK51 FK58 GREASABLE SHACKLE KIT ANTI-INVERSION KIT U BOLTS STONE GUARD KIT EXTRA LEAF SWAY BAR SWAY BAR FIT KIT BRAKE PROPORTIONING BRACKET 1 1 1 1 ALL MODELS SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT UNIT PRICE $ UNIT PRICE $ 2 2 5 2 6 5 2 2 2 2 3 1 6 1 4 1 2 1 6 1 7 1 3 5 REMARKS: 1 OMECA77B Caster Kit will increase caster angle by 3o. Check manufacturer's specifications to determine if required. 2 Be sure to select OME Bush Kits carefully: OMESB85: Use for all Models when installing OME greasable shackles and pins. OMESB86: Use when original shackles and pins are used. 3 To prevent springs from inverting it is mandatory that either OMEGS19 Greasable Shackle Kit or FK38 Anti-Inversion Kit be installed. 4 Should the front drive shaft contact the sway bar when the suspension is at full droop, use FK19 Spacer Kit to pack the sway bar down. 5 OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. 6 FK44 suits Models with OE sway bar mount. FK45 suits Models without sway bar provision. OMESTAB2 Sway Bar is highly recommended when 800kg constant spring is used. 7 FK51 is i Brake B k Proportioning P ti i Kit for f 400kg 400k spring. i FK58 iis ffor th the 800k 800kg spring. i Page 77 OME NO.28 INT JULY 2012 TOYOTA LANDCRUISER 78 SERIES FRONT Estimated Lift: 40mm PETROL & DIESEL 6 CYLINDER ENGINES PART NUMBER SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER 2856 60008 *N181 / N106 SPRING: 51 TO 120 KGS NITROCHARGER SPORT NITROCHARGER 2859 60008 N181 OMESD24 OMESD47 OMECA77B FK19 OME79PF10 OMESTAB3 STEERING DAMPER CASTER KIT SWAY BAR SPACER KIT TRIM PACKER UPGRADED FRONT SWAY BAR QTY 6 UNIT PRICE $ 2859 60008 *N181 / N106 2 6 2853 60008 N181 1 2 5 1 OMESD47 1 1 1 OMECA77B FK19 OME79PF10 OMESTAB3 4 1 78 SERIES TROOP CARRIER Estimated Lift: All Models: 45mm PART NUMBER SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER 3 CS013R 60010 *N75F / N75E SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER CS014R 60011 N197 SPRING: CONSTANT 600 KGS NITROCHARGER SPORT NITROCHARGER CS015R 60011 N197 SPRING: CONSTANT 800 KGS NITROCHARGER SPORT CS066R 60109 OMESB86 OMESB85 OMEGS19 OMEGP7 OMEU59B OMESTAB2 FK45 FK44 FK34 FK51 FK58 D14XL UCB17 GREASABLE SHACKLE KIT U BOLTS SWAY BAR SWAY BAR FIT KIT SWAY BAR EXTENSION BRACKET KIT BRAKE PROPORTIONING KIT EXTRA LEAF CENTRE BOLT PART NUMBER 1 REAR SPRING BUSH KIT V8 DIESEL ENGINE 3 QTY 8 UNIT PRICE $ 8 7 8 2 2 2 2 1 7 4 1 7 1 3 1 8 1 1 2 1 1 4 1 1 1 OMESB85: Use for all Models when installing shackles g OME greasable g and pins. OMESB86: Use for Troop Carrier Models when original shackles and pins are used. 3 FK34 Sway Bar Extension Bracket Kit must be installed to prevent damage to sway bar mounts, due to increased suspension travel. FK34 not needed if fitting OMESTAB2. 4 Should the front drive shaft contact the sway bar when the suspension is at full droop, use FK19 Spacer Kit to pack the sway bar down. 5 OMESD24 suits pre 2007 Models (open length 651mm). OMESD47 suits 2007 On Models (open length 750mm). 6 To maintain correct rear to front ride height rake, no more than 40mm of front lift should be accepted. 7 OMESTAB2 Sway Bar is a mandatory fitment when 800kg Constant Spring is used. Sway Bar can also be fitted to lighter rated springs to improve road handling. FK44 suits Models with OE axle sway bar mount. FK45 suits Models without OE sway bar provision. 8 FK51 is Brake Proportioning Valve Kit for 200kg and 400kg spring. FK58 is for 600kg and 800kg spring. 2 2 Page 78 6 2 2 2 2 OMECA77B Caster Kit will increase caster angle by 3o. Check manufacturer's specifications to determine if OMECA77B kit is required. 2 3 1 1 2 2 6 UNIT PRICE $ REMARKS: 2 8 QTY OME NO.28 INT JULY 2012 TOYOTA LANDCRUISER 79 SERIES FRONT Estimated Lift: 40mm PETROL & DIESEL 6 CYLINDER ENGINES PART NUMBER SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER 2856 60008 *N181 / N106 SPRING: 51 TO 120 KGS NITROCHARGER SPORT NITROCHARGER 2859 60008 N181 OMESD24 OMESD47 OMECA77B FK19 OME79PF10 OMESTAB3 STEERING DAMPER CASTER KIT SWAY BAR SPACER KIT TRIM PACKER UPGRADED FRONT SWAY BAR REAR Estimated Lift: All Models: 45mm 6 6 OMESD47 1 1 1 OMECA77B FK19 OME79PF10 OMESTAB3 PART NUMBER CS015R 60011 N197 SPRING: CONSTANT 800 KGS NITROCHARGER SPORT CS066R 5 60109 OMESB101 OMESB84 OMESB85 OMEGS10 OMEGP7 OMEU59B OMESTAB2 FK45 FK44 FK51 FK58 D14XL UCB17 EXTRA LEAF CENTRE BOLT 1 79 SERIES SINGLE CAB SPRING: CONSTANT 600 KGS NITROCHARGER SPORT NITROCHARGER BRAKE PROPORTIONING KIT 2853 60008 N181 1 1 CS014R 60011 N197 SWAY BAR FIT KIT 2859 60008 *N181 / N106 1 3 4 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER U BOLTS SWAY BAR PART NUMBER 2 CS013R 5 60010 *N75F / N75E GREASABLE SHACKLE KIT UNIT PRICE $ 2 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT QTY V8 DIESEL ENGINE QTY 8 UNIT PRICE $ 8 8 8 2 2 7 1 8 1 1 1 4 1 1 1 OMESB85: Use for all Models when installing OME greasable shackles and pins. 3 OMESD24 suits pre 2007 Models (open length 651mm). OMESD47 suits 2007On Models (open length 750mm). 1 7 2 OMESB84: Use on original shackles and pins for 79 Series Models To 06/2009. 2 2 4 1 1 OMESB101: Use on original shackles and pins for 79 Series Models from p 07/2009 On. 2 2 6 2 2 7 2 OMECA77B Caster Kit will increase caster angle by 3o. Check manufacturer's specifications to determine if OMECA77B kit is required. 2 5 1 1 2 2 6 UNIT PRICE $ REMARKS: 2 5 QTY 4 Should the front drive shaft contact the sway bar when the suspension is at full droop, use FK19 Spacer Kit to pack the sway bar down. 5 Include tray weight in constant load calculation. 2 2 6 To maintain correct rear to front ride height rake, no more than 40mm of front lift should be accepted. 7 OMESTAB2 Sway Bar is a mandatory fitment when 800kg Constant Spring is used. Sway Bar can also be fitted to lighter rated springs to improve road handling. FK44 suits Models with OE axle sway bar mount. FK45 suits Models without OE sway bar provision. 8 FK51 is Brake Proportioning Valve Kit for 200kg and 400kg spring. FK58 is for 600kg and 800kg spring. Due to variance in tray clearance on 79 Series please check vehicle before selecting Fit Kit. Page 79 OME NO.28 INT JULY 2012 TOYOTA LANDCRUISER 75 SERIES FRONT Estimated Lift: 50mm PETROL ENGINE PART NUMBER SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER CS006F 60009 *N88 / N92 SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER U BOLTS SPRING BUSH KIT CS006F 60063 *N50 / N88 OMEU51 OMESB1 OMEGS2 OMEGP1 OMESD24 FK08 D16XL UCB5 GREASABLE SHACKLE KITS STEERING DAMPER ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT REAR Estimated Lift: 70mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2 CS007F 60063 *N50 / N88 OMEU51 OMESB1 OMEGS2 OMEGP1 OMESD24 FK08 D16XL UCB5 2 2 4 2 1 2 5 PART NUMBER CS006F 60009 *N88 / N92 2 2 PART NUMBER CS006R 2 60010 *N75F / N75E CS007R 60011 N75F SPRING: CONSTANT 600 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS CS008R 60011 N75F OMESB16 OMEU59B OMEGS1 OMEGP2 OMEGP4 FK08 D25XL UCB4 ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT 2 UNIT PRICE $ 1 1 2 2 QTY 2 UNIT PRICE $ 2 2 2 2 2 4 2 1 2 5 1 1 2 2 ALL MODELS SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER GREASABLE SHACKLE KIT 1 QTY DIESEL ENGINE QTY 4 UNIT PRICE $ 2 2 2 4 2 2 2 4 2 2 2 4 3 2 1 1 2 2 REMARKS: 1 Vehicles with no front accessory weight will require the removal of the 4th leaf from the top of the spring stack. This is to maintain good shackle angle by not allowing the bump stop measurement to exceed 100mm. 2 Shackles: FK08 Anti Inversion Kit is mandatory fitment front and rear if greasable shackles are not fitted. Note: Spring Caster Wedge OMECW2 (2o Caster Wedges) may be required to restore positive caster angle. Front end alignment check will indicate required adjustment. 3 There can be 2 spigot sizes in the rear fixed end pins on 75 Series LandCruisers. Check for correct size before ordering greasable pins. Part numbers are: 50mm spigot = OMEGP2. 51mm spigot = OMEGP4. 4 Include tray weight in constant load calculation. 5 D16XL suitable for CX006F. Page 80 OME NO.28 INT JULY 2012 TOYOTA LANDCRUISER HZJ71 & HZJ74 SWB & MWB FRONT Estimated Lift: 50mm SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER CASTER KIT REAR Estimated Lift: 60mm DIESEL 4.2 ENGINES PART NUMBER QTY 2856 60008 N106 1 2859 60008 N106 OMESD24 OMECA77B 1 2 2 1 1 1 ALL MODELS PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER CS017RB 60044 N68 SPRING: CONSTANT 250 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS CS004RB 60044 N75 OMESB93 OMEU59A OMEGS10 OMEGP7 GREASABLE SHACKLE KITS UNIT PRICE $ 2 QTY 3 UNIT PRICE $ 2 2 2 3 2 2 3 2 4 3 1 REMARKS: 1 OMECA77B caster kit will increase caster angle by 3o. Check manufacturer's specifications to determine if OMECA77B kit is required. 2 If rear bump stop measurements exceed 150mm remove 3rd leaf. 3 OME greasable shackles OMEGS10 & OMEGP7 are mandatory fitment. OE shackles cannot be used. LANDCRUISER II WAGON FRONT Estimated Lift: 30mm SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 40mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 100 KGS NITROCHARGER SPORT NITROCHARGER PART NUMBER QTY 2872 60089 N77 1 UNIT PRICE $ 2 2874 60089 *N77B / N77 1 2 ALL MODELS PART NUMBER QTY 2873 60090 N79 1 2875 60090 *N79B / N79 1 UNIT PRICE $ 2 2 Page 81 OME NO.28 INT JULY 2012 TOYOTA BUNDERA RJ70 11/1984 - 1990 FRONT Estimated Lift: 40mm PETROL & DIESEL ENGINES PART NUMBER QTY SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER 2870 60094 N114 1 SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER 2876 60094 N114 1 REAR Estimated Lift: 50mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER UNIT PRICE $ 2 2 ALL MODELS PART NUMBER QTY 2871 60095 60096 N112 N113 1 1 1 1 1 UNIT PRICE $ REMARKS: 1 N112 / 60095 fits left hand side. N113 / 60096 fits right hand side. LANDCRUISER 70, 73, 74 SERIES SWB & MWB FRONT Estimated Lift: 50mm PETROL & DIESEL ENGINES PART NUMBER SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER CS006F 60009 *N88 / N92 SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS CS006F 60009 N88 OMESB1 OMEU51 OMEGS2 OMEGP1 OMESD24 FK08 GREASABLE SHACKLE KITS STEERING DAMPER ANTI INVERSION KIT REAR Estimated Lift: 75mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KITS ANTI INVERSION KIT 1 QTY 3 UNIT PRICE $ 1 Vehicles with no front accessory weight 2 will require the removal of the 4th leaf from the top of the spring stack. This is to maintain good shackle angle by not allowing the bump stop measurement to exceed 100mm. 2 2 2 2 4 2 If bump stop measurement exceeds 150 - 160mm remove 3rd leaf from top of spring stack to prevent shock absorber from topping out. 1 3 1 1 3 Shackles: FK08 Anti Inversion Kit is ALL MODELS PART NUMBER CS017RA / B 60062 N85 CS004RA / B 60062 N85 OMESB1 OMEU59A OMEGS2 GSP01 FK08 QTY 3 1+1 2 2 3 S REMARKS: UNIT PRICE $ mandatory fitment front and rear if greasable shackles are not fitted. Note: Spring Caster Wedge OMECW2 (2o Caster Wedges) may be required to restore positive caster angle. Front end alignment check will indicate required adjustment. 1+1 2 2 4 1 4 There can be 2 spigot sizes of the rear fixed end pins. Check spigot size before ordering greasable pins. 50mm spigot = OMEGP2 51mm spigot = OMEGP4 4 3 1 Page 82 OME NO.28 INT JULY 2012 TOYOTA LANDCRUISER 60, 61 & 62 SERIES FRONT Estimated Lift: 50mm PETROL ENGINE PART NUMBER SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER CS003F 60009 *N88 / N92 SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS CS004F 60063 N88 OMESB1 OMEU51 OMEGS2 OMEGP1 OMESD24 FK08 D1XL UCB3 GREASABLE SHACKLE KITS STEERING DAMPER ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT REAR Estimated Lift: 75mm SPRING: RIDE/LIGHT LOAD NITROCHARGER SPORT NITROCHARGER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER FITTING KIT SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER FITTING KIT SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KITS ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT 1 QTY 2 UNIT PRICE $ CS004F 60009 *N50 / N88 2 1 2 CS005F 60063 N50 OMESB1 OMEU51 OMEGS2 OMEGP1 OMESD24 FK08 D1XL UCB3 2 2 2 4 1 2 7 PART NUMBER 2 1 1 2 2 QTY 5 UNIT PRICE $ 1 1+1 2 3 2 5 2 3 1 5 1+1 3 2 2 1 2 2 2 2 4 1 2 7 1 1 2 2 Front bump stop measurement must not exceed 100mm to ensure good shackle angle. To reduce bump stop gap, remove the 4th leaf from the top of the spring. OMECW2 Caster Wedge Kit may be required to restore correct caster angle. mandatory fitment if greasable shackles are not fitted. Refer OME Technical & Fitting Manual. 3 Post 1986 vehicles have a 19mm Pre 1986 vehicles have a 16mm mounting pin and suit shock part no's N95, N42, N89, 60032 & 60064. 4 Fitting Kit is only required on vehicles with rubber insulators around rear springs. Refer OME Technical & Fitting Manual Section 7 GFI: LandCruiser 60 Series page 7 selection chart. 3 1 2 4 5 Barn door Models may require A/A or B/B spring fitment. USA LHD Models require A/A or B/B spring fitment. 1 6 2 mounting pin and suit shock part no's N94, N90, N85, 60062 & 60065. 4 2 2 UNIT PRICE $ 2 Shackles: FK08 Anti Inversion Kit is 1+1 3 4 1 QTY REMARKS: 3 CS004RA / B 2 *60064 / 60032 *60065 / 60062 *N90 / N85 *N42 / N89 FK0422 FK0411 CS005RA / B 60064 60065 N90 N42 FK0418 OMESB1 OMEU59B OMEGS1 OMEGP1 FK08 D2XL UCB2 PART NUMBER 2 ALL MODELS CS017RA / B 60032 60062 N94 N95 DIESEL ENGINE 1 2 2 Page 83 6 D2XL only suitable for CS004RA/B & CS005RA/B. 7 D1XL only suitable for CX003F & CS004F. OME NO.28 INT JULY 2012 TOYOTA LANDCRUISER 45, 47 SERIES ALL LWB MODELS FRONT PETROL & DIESEL ENGINES Estimated Lift: 35mm PART NUMBER SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER CS001F 60097 N81 U BOLTS - 25mm Eye Spring U BOLTS - 35mm Eye Spring GREASABLE SHACKLE KITS STEERING DAMPER ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT REAR UNIT PRICE $ 1 2 CS002F 60097 *N41 / N81 See Chart Below OMEU59A OMEU59B OMEU59A OMEU55 See Chart Below OMESD23 FK08 D3XL UCB8 SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT QTY 1 2 2 3 1 3 1 1 REMARKS: 1 1 2 2 1 FK08 Anti Inversion Kit is mandatory fitment front and rear if greasable shackles are not fitted. 2 Remove 3rd leaf from CS003R spring stack to reduce spring rate for light duty application. Include tray weight in constant load calculation. ALL MODELS Estimated Lift: 50mm PART NUMBER CS003R 60032 N42 SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS TRIM PACKER GREASABLE SHACKLE KITS ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT 1 QTY UNIT PRICE $ 2 2 1 CS003R 60064 N42 See Chart Below OMEU59B TP02 See Chart Below FK08 D8XL UCB4 2 2 2 4 1 1 2 2 GREASABLE SHACKLES Compatible Bush Kit QTY 1 1 1 1 OMESB1 OMESB1 OMESB30 OMESB30 2 2 2 2 1 2 1 1 OMESB79 OMESB79 OMESB30 OMESB30 2 2 2 2 KIT PART NO. QTY OMEGS2 OMEGP1 OMEGS8 OMEGP8 18mm Shackle Pins & 30mm OMEGS17 Hanger Bracket *GSP02 15mm Shackle Pins & 25mm OMEGS9 Hanger Bracket OMEGP8 FRONT 18mm Shackle Pins & 35mm Hanger Bracket 15mm Shackle Pins & 25mm Hanger Bracket UNIT PRICE $ UNIT PRICE $ REAR * GSP02 is only a greasable pin replacement for original pin. Page 84 OME NO.28 INT JULY 2012 TOYOTA LANDCRUISER 40, 42 SERIES SWB FRONT PETROL & DIESEL ENGINES Estimated Lift: 35mm PART NUMBER SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER CS001F 60097 N81 SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER U BOLTS - 25mm Eye Spring U BOLTS - 35mm Eye Spring GREASABLE SHACKLE KITS STEERING DAMPER ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT REAR UNIT PRICE $ 2 2 CS002F 60097 N41 OMESB30 OMESB1 OMEU59A OMEU59B OMEU59A OMEU55 See Chart Below OMESD23 FK08 D3XL UCB8 SPRING BUSH KIT QTY 2 2 1 2 3 1 3 1 2 1 1 2 2 ALL MODELS Estimated Lift: 60mm PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER CS001R 60032 *N89 / N95 SPRING: CONSTANT 150 KGS NITROCHARGER SPORT NITROCHARGER U BOLTS SPRING BUSH KIT GREASABLE SHACKLE KITS ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT QTY UNIT PRICE $ 2 3 CS002R *60064 / 60032 N89 OMEU59A OMESB30 OMESB1 See Chart Below FK08 D4XL UCB8 2 2 3 2 4 1 2 2 1 2 2 REMARKS: 1 OMESB30 suits 35mm spring eye and 25mm hanger bracket with 15mm shackle pin hole. OMESB1 suits 35mm spring eye and hanger bracket with 18mm shackle pin hole. 2 FK08 Anti Inversion Kit is mandatory fitment front and rear if greasable shackles are not fitted. 3 1975 and newer FJ 40's may need to use N76 shocks in rear: Pre 1975 shock eye in the top of the axle housing: Use N89 / N95 / 60032 / 60064 Post 1975 lower shock ey is below leaf spring: Use N76 with OMEB11 Bush Kit GREASABLE SHACKLES UNIT PRICE $ REAR QTY 1 OMEGS1 1 OMEGP1 1 OMEGP1 1 OMEGS8 1 OMEGS9 1 OMEGP8 1 OMEGP8 1 FRONT QTY. 18mm Shackle Pin OMEGS2 15mm Shackle Pin Page 85 UNIT PRICE $ Compatible UNIT Bush Kit PRICE $ OMESB1 OMESB30 OME NO.28 INT JULY 2012 TOYOTA TACOMA V6 2005 ON FRONT Estimated Lift: 50mm SPRING: TO 50 KGS NITROCHARGER SPORT STRUT SPRING: 51 TO 100 KGS NITROCHARGER SPORT STRUT REAR Estimated Lift: 55mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER U BOLT SPRING BUSH KIT DRIVESHAFT SPACER KIT PART NUMBER QTY 2885 *90000 / 90021 N140S 1 2886 90000 N140S UNIT PRICE $ 2 1 1 2 1 ALL MODELS PART NUMBER QTY CS047R 60091 N182 OMEU53A USE OE FK29 UNIT PRICE $ 2 4 1 REMARKS: 1 No top mounting bushes supplied, re-use OE bushes. TACOMA V6 & 4 CYLINDER 1998 - 2004 FRONT Estimated Lift: 45mm PART NUMBER QTY SPRING: TO 50 KGS NITROCHARGER SPORT STRUT 2880 90004 N91SC 1 SPRING: 51 TO 100 KGS NITROCHARGER SPORT STRUT 2881 90004 N91S REAR Estimated Lift: 55mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT GREASABLE SHACKLE KIT EXHAUST BRACKET KIT UNIT PRICE $ 2 1 2 ALL MODELS PART NUMBER CS046RA / B *60065 / 60062 N85 OMESB88 OMESB89 OMEGS12 FK21 QTY 2 UNIT PRICE $ 1+1 2 1 2 1 1 1 2 REMARKS: 1 OMESB88 must be used with OMEGS12 greasable shackles. OMESB89 must be used with original shackles. 2 FK21 Exhaust Bracket is mandatory fitment to ensure exhaust system clears springs. Page 86 OME NO.28 INT JULY 2012 TOYOTA HILUX/VIGO 2005 ON ALL MODELS FRONT Estimated Lift: 30mm ALL ENGINES PART NUMBER SPRING: TO 75 KGS STRUT - SPORT STRUT 2883 *90002 / 90011 *N167S / N166S SPRING: BAR ONLY STRUT - SPORT STRUT 2884 90002 N167S SPRING: BAR & WINCH STRUT - SPORT STRUT TRIM PACKER 2885 90002 N167S OME95PF5 REAR Estimated Lift: 45mm SPRING: LOW LIFT 20mm NITROCHARGER SPORT NITROCHARGER SPRING: LIGHT LOAD NITROCHARGER SPORT NITROCHARGER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER QTY 1 1 2 2 1 1 2 2 1 1 2 2 UNIT PRICE $ ALL MODELS PART NUMBER CS043R-15 60006 N168 CS043R 60006 N168 CS044R 60006 *N169 / N168 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER CS045R 60007 N169 SPRING: CONSTANT 600 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT BRAKE PROPORTIONING BRACKET EXTRA LEAF CENTRE BOLT CS071R 60007 N169 OMESB98 OMEU53A OMEGS14 FK59 D13XL UCB14 QTY 3 UNIT PRICE $ 2 2 3 2 2 3 2 2 3 2 2 3 2 2 4 2 4 1 1 2 2 REMARKS: 1 To maintain coil clearance from the sway bar, the coil seat must be installed with the helix facing away from the sway bar. 2 No top mounting bushes supplied, re-use OE bushes. 3 Include tray weight in constant load calculation. 4 D13XL will give approximately 22mm extra lift or increase loading capacity at design height by approximately 200kgs. Page 87 OME NO.28 INT JULY 2012 TOYOTA HILUX/TIGER 1997 - 2004 ALL MODELS FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER 303003 60042 *N87 / N80 OMESD33 REAR Estimated Lift: 50mm 1 UNIT PRICE $ 1 2 1 ALL MODELS PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER CS018R 3 60043 + 60044 N68 + N68E SPRING: CONSTANT 120 KGS NITROCHARGER SPORT CS019R 3 60043 + 60044 *N75 + N75E N68 + N68E NITROCHARGER QTY SPRING: CONSTANT 250 KGS NITROCHARGER SPORT NITROCHARGER CS020R 3 60043 + 60044 *N75 + N75E SPRING: CONSTANT 400 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT GREASABLE SHACKLE KIT ANTI INVERSION KIT FITTING KIT EXTRA LEAF CENTRE BOLT CS021R 3 60043 + 60044 *N75 + N75E OMESB43 OMEGS7 FK15 FK01 D6XL UCB6 QTY 5 2 2 1+1 5 2 2 1+1 5 2 2 1+1 5 2 2 1+1 3 4 6 UNIT PRICE $ 2 1 1 1 2 2 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. 2 60043, N75E and N68E are longer in length and must be fitted to right hand side only. Fitment to left hand side may cause damage to shock absorber and vehicle. 3 Mandatory Fitment: Either OMEGS7 or FK15 Anti Inversion Kit required to prevent possible spring inversion. 4 Fitment of FK01 Spacer Washers to U bolts is required to ensure correct tension is obtained on U bolts. 5 Include tray weight in constant load calculation. 6 D6XL suitable for CS019R, CS020R and CS021R. Page 88 OME NO.28 INT JULY 2012 TOYOTA HILUX & 4 RUNNER PRE 1997 ALL LEAF SPRING MODELS FRONT Estimated Lift: 45mm PETROL ENGINES PART NUMBER SPRING: TO 50 KGS NITROCHARGER SPORT NITROCHARGER CS008FA / B 60061 N84 SPRING: 51 TO 110 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT U BOLT FITTING KIT CS009FA / B 1 60061 *N93 / N84 OMESB5 OMEU52 FK03 OMEGS4 OMEGP3 OMESD21 D17XL UCB7 GREASABLE SHACKLE KITS STEERING DAMPER EXTRA LEAF CENTRE BOLT REAR Estimated Lift: 50mm SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER SPRING: CONSTANT 250 KGS NITROCHARGER SPORT NITROCHARGER U BOLTS SPRING BUSH KIT GREASABLE SHACKLE KITS TRIM PACKER ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT 1 2 QTY 3 UNIT PRICE $ 3 CS009FA / B 1 60061 N93 OMESB5 OMEU52 FK10 OMEGS4 OMEGP3 OMESD21 D17XL UCB7 1+1 2 3 2 2 1 1 1 1 2 2 ALL MODELS PART NUMBER CS009R 4 6 *60064 / 60032 *60065 / 60062 *N85 / N94 *N89 / N95 CS010R 4 60064 60065 N85 N89 OMEU53 OMESB6 OMEGS3 OMEGP3 TP04 FK09 FK13 D5XL UCB6 QTY 7 2 PART NUMBER CS009FA / B 1 60061 *N93 / N84 1+1 2 2 DIESEL ENGINES UNIT PRICE $ 3 1+1 2 3 2 2 1 2 1 1 2 2 Petrol HiLux may require FK03 (Saddle Correction Plates) if the spring seats are distorted. FK10 must be fitted to all Diesel & Petrol Models used off road. Refer OME Technical & Fitting Manual. 3 OMEU52 is required when fitting OME springs to stop the U bolt contacting the drag link. Refer OME Technical & Fitting Manual. 4 A trim packer may be required to trim vehicle. Only to be used on rear springs. 5 Post 1984 vehicles have a 19mm mounting pin and suit shock part numbers: N85, N94, 60062 and 60065. Pre 1984 vehicles have a 16mm mounting pin and suit shock part numbers: N89, N95, 60032 and 60064. 6 If greasable shackles are not fitted Anti Inversion Kits must be fitted. 2 5 4 2 4 1 2 2 2 2 5 6 2 A/A spring fitment may be needed on some vehicles for trimming purposes. 2 1 1+1 1 5 2 3 UNIT PRICE $ REMARKS: 5 6 7 2 QTY FK09 fits all pre 1984 Models. FK13 fits all 1985 Models On. 7 Page 89 Include tray weight in constant load calculation. To provide correct shackle angle, 1985 - 89 automatic 4 Runner Models require the 3rd leaf to be removed to reduce spring rate. OME NO.28 INT JULY 2012 TOYOTA HILUX PRE 1997 EXTRA CAB & DUAL CAB SR5 IFS & REAR LEAF MODELS FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS: 50 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER REAR Estimated Lift: 50mm 303003 60072 N98 OMESD33 1 UNIT PRICE $ 1 2 1 ALL MODELS PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER CS019R 60065 *N85 / N94 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT CS020R 60065 *N85 / N94 OMESB43 OMEU53 OMEU53B U BOLTS QTY 2 QTY 3 REMARKS: UNIT PRICE $ 3 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. 2 Compare original spring stack height to OME spring stack to decide whether OMEU53 or OMEU53B U bolts are required. 3 Include tray weight in constant load calculation. 2 2 2 1 2 2 2 2 4 4 RUNNER 2010 ON (USA MODEL) FRONT Estimated Lift: 50mm V6 4.0L PETROL ENGINE PART NUMBER QTY SPRING: NO BAR STRUT - SPORT 2883 90010 2 SPRING: BAR ONLY STRUT - SPORT 2884 90010 2 SPRING: BAR AND WINCH STRUT - SPORT TRIM PACKER REAR Estimated Lift: 50mm SPRING: MEDIUM LOAD NITROCHARGER SPORT 1 1 2885 90010 OME95PF5 1 2 UNIT PRICE $ 1 2 1 2 1 2 1 LWB MODEL PART NUMBER QTY 2895 60080 3 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT 2896 *60081 / 60080 3 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT TRIM PACKER STONE GUARD KIT 2897 60081 OME150PR10 OME661 3 1 2 1 2 1 2 3 1 UNIT PRICE $ REMARKS: 1 Vehicles with KDSS, must have 1 x OME95PF5 packer installed on the front right hand side to maintain correct trim. 2 No top mounting bushes supplied, re-use OE bushes. 3 OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. Page 90 OME NO.28 INT JULY 2012 TOYOTA 4 RUNNER 2003 TO 2010 (USA MODEL) FRONT Estimated Lift: 25-50mm SPRING: NO BAR STRUT - SPORT STRUT SPRING: TO 75 KGS STRUT - SPORT STRUT TRIM PACKER PART NUMBER 2884 90000 N140S 2885 90000 N140S OME95PF5 QTY 1 1 2 2 1 1 2 2 UNIT PRICE $ REAR Estimated Lift: 50mm PART NUMBER QTY 2895 60004 N141 1 SPRING: CONSTANT 150 KGS NITROCHARGER SPORT NITROCHARGER 2896 *60005 / 60004 N142 1 SPRING: CONSTANT 300 KGS NITROCHARGER SPORT NITROCHARGER STONE GUARD KIT 2897 60005 N142 OME661 SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER UNIT PRICE $ 2 2 1 2 1 REMARKS: 1 OME front coils can only be installed with OME Nitrocharger strut and coil seats. 2 No top mounting bushes supplied, re-use OE bushes. 4 RUNNER 1996 - 2002 (USA MODEL) FRONT Estimated Lift: 30mm SPRING: TO 50KGS SPRING: 51 TO 100KGS NITROCHARGER SPORT NITROCHARGER REAR Estimated Lift: 50mm SPRING: MEDIUM LOAD SPRING: CONSTANT 250KGS NITROCHARGER SPORT NITROCHARGER PETROL & DIESEL ENGINES PART NUMBER QTY 2880 2881 90004 N91S 1 1 UNIT PRICE $ 2 ALL MODELS PART NUMBER QTY 2906 2890 *60027 / 60028 N86 1 1 UNIT PRICE $ 2 Page 91 OME NO.28 INT JULY 2012 TOYOTA 4 RUNNER 1990 - 1996 (TO 1995 IN USA) IFS REAR COIL SPRING MODELS FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER REAR Estimated Lift: 40mm 303003 60072 N98 OMESD33 QTY UNIT PRICE $ 1 1 2 1 ALL MODELS PART NUMBER QTY SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER 2900 60073 N72F 1 SPRING: CONSTANT 150 KGS NITROCHARGER SPORT NITROCHARGER 2901 60073 N72F UNIT PRICE $ 2 1 2 REMARKS: 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. 4 RUNNER 1986 - 1990 (TO 1989 IN USA) IFS REAR LEAF SPRING MODELS FRONT PETROL & DIESEL ENGINES PART NUMBER TORSION BARS: OVER 50 KGS NITROCHARGER SPORT NITROCHARGER STEERING DAMPER REAR Estimated Lift: 50mm 303003 60072 N98 OMESD33 SPRING: CONSTANT 200 KGS NITROCHARGER SPORT NITROCHARGER SPRING BUSH KIT CS010R 60065 N85 OMESB6 OMEU53 OMEU53B OMEGS3 OMEGP3 1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. 2 Compare original spring stack height to OME spring stack to decide whether OMEU53 or OMEU53B U bolts are required. 3 Install OE caster wedges from OE spring stack onto OME springs. Ensure wedges are fitted as per original position. 1 2 1 PART NUMBER CS009R 60065 *N85 / N94 GREASABLE SHACKLE KITS 1 UNIT PRICE $ ALL MODELS SPRING: MEDIUM LOAD NITROCHARGER SPORT NITROCHARGER U BOLTS QTY REMARKS: 2 QTY 3 UNIT PRICE $ 2 2 2 3 2 2 2 2 4 1 Page 92 OME NO.28 INT JULY 2012 VOLKSWAGEN AMAROK 2010 ON ALL MODELS FRONT Estimated Lift: 20mm DIESEL ENGINE PART NUMBER QTY SPRING: NO BAR STRUT - SPORT 2640 90012 1 2 SPRING: BAR STRUT - SPORT 2640 90013 1 2 1 2 SPRING: BAR & WINCH STRUT - SPORT TRIM PACKER REAR Estimated Lift: 20mm 2641 90013 OME95PF5 UNIT PRICE $ 1 2 1 2 1 2 2 DIESEL ENGINE PART NUMBER SPRING: MEDIUM LOAD NITROCHARGER SPORT CS064R 60082 SPRING: CONSTANT 400 KGS NITROCHARGER SPORT STONE GUARD KIT U BOLTS - MEDIUM SPRING U BOLTS - CONSTANT 400KGS SPRING EXTRA LEAF CS065R 60083 OME665 OMEU59A OMEU59B D38XL QTY 3 UNIT PRICE $ 2 4 3 4 4 2 1 4 5 2 REMARKS: 1 Top mountt bump stop T b t and d bushes b h nott supplied, li d re-use OE items. it 2 For trimming purposes only, maximum 1 packer per strut. 3 Re-use OE bushes. Workshop fitting kit FK33 recommended for easier bush install (note: one FK33 kit required per workshop). 4 OME665 Lower Shock Mount Stone Guard is mandatory fitment to rear shocks to protect against severe stone peppering encountered on loose rood surfaces. 5 D38XL will give approximately 12mm extra lift or increase loading capacity at design height by approximately 160kgs. Fitting Time: Due to the complexity of installation allow 5 hours for complete install. Page 93 OME NO.28 INT JULY 2012 BUSHES IN KITS DIAGRAM # OMESB2360 OMESB2360 1 OMESB2360 OMESB0052 1 1 2 1 4 4 4 4 7 7 7 7 OMESB2361 OMESB82 OMECA77B OMEGQPF05 OMEGQPF10 OMESB0055 OMESB0056 OMESB0054 OMESB2365 OMESB2379 OMEGQPR05 OMEGQPR10 OMESB0062 OMESB0061 OMESB0054 OMESB2379 OMESB64 1 2 1 4 6 4 1 1 1 1 1 1 1 1 1 1 1 2 8 4 4 2 8 8 8 4 8 6 2 4 8 8 8 8 8 8 8 8 9 9 9 9 9 9 4 Suits OME springs only F Spring bush R Spring bush OMESB19 OMESB19 2 2 6 6 4 4 Suits OE & OME springs R Spring & shackle bush kit OMESB90 2 6 4 Suits OE & OME springs R Spring bush R Spring bush OMESB80 OMESB80 2 2 6 6 4 4 Suits OE & OME springs Suits OE & OME springs ALL F Coil Packer - 10mm OMELNF10 92 on F Caster kit CALR2 1 4 8 County 110 Model 84 to 92 F Caster kit CALR1 1 4 8 Discovery All Models 89 to 99 F Caster kit CALR2 1 4 8 Range Rover 72 to 86 F Caster kit CALR1 1 4 8 Range Rover 86 to 95 F Caster kit CALR2 1 4 8 OMESB2361 OMESB82 1 2 4 6 7 4 OMESB83 2 6 4 F Sway bar - link inner OMESB2361 1 4 2 F Sway bar - link inner/outer 1 OMESB2360 2 4 2 OMESB8 2 6 4 OMESB2360 2 4 2 MODEL YEAR DAIHATSU F Series All Models 5/93 on Feroza All Models Rocky All Models 10/88 on 4/84 to 93 FORD Courier All Models 1/87 on Maverick SWB & Wagon Models 8/87 to 9/93 Maverick Single Cab Models Leaf Springs GMH / ISUZU Drover Jackaroo / Trooper Models UBS 16 & 17 Rodeo - Isuzu Pick Up Models All Models V6 Models Only LADA NIVA 2/85 on 8/85 to 91 81 to 87 88 on LOC'N OME P/NO. KITS REQ SUSPENSION BUSH KIT SELECTION DESCRIPTION F R F F Sway bar - link lower Sway bar - link upper Sway bar - link inner/outer Sway bar - link eye F Sway bar - link R Spring bush F Caster Kit Coil Packer - 5mm Coil Packer - 10mm Control arm - to diff front/centre (std) Control arm - to chassis Panhard rod Sway bar - D mount (15mm) Sway bar - link R Coil Packer - 5mm Coil Packer - 10mm Control arm - upper Control arm - lower Panhard rod Sway bar - link Spring & shackle bush kit 1 1 NOTE LAND ROVER Defender 90, 110 & 130 Models MAZDA B2500 & B2600 B2500 & B2600 3/87 to 98 F Sway bar - link R Spring bush MITSUBISHI Challenger PA Wagon (Rear Leaf Springs) Pajero 98 to 5/00 R Spring bush NG NA, NB, NC, ND, NE, NF & NG 9/89 to 5/91 83 to 5/91 All Leaf Spring Models 5/91 on R Spring bush Triton Club Cab Model Only F Sway bar - link inner/outer 1 When remaining stock of OME P/NO. P/NO is exhausted exhausted, no further product will be available available. Page 94 1 Suits 44mm wide control arms Suits 38mm wide control arms Suits 44mm wide control arms Suits 38mm wide control arms Suits 44mm wide control arms Suits V6 & intercooled diesel models Suits 4 cyl petrol & diesel models not intercooled OME NO.28 INT JULY 2012 NISSAN Navara D21 All 9/85 to 97 Navara D22 All 2/97 on OME P/NO. DIAGRAM # 10/96 on DESCRIPTION BUSHES IN KITS YEAR MITSUBISHI (continued) Triton - cont. Club Cab Model Only - cont. MK Models R Spring bush R Spring & shackle bush kit OMESB38 OMESB38 2 2 6 6 4 4 OMESB2379 OMESB81 OMESB2379 OMESB81 OMESB91 OMESB2379 1 2 1 2 2 1 8 6 8 6 6 8 1 4 1 4 4 1 LOC'N VEHICLE KITS REQ SUSPENSION BUSH KIT SELECTION NOTE Pathfinder All Patrol 8/86 to 94 F Sway bar - link R Spring & shackle bush kit Sway bar - link upper R Spring & shackle bush kit R Spring & shackle bush kit F Sway bar - link MQ (Round Head Lights) 80 to 8/84 F Spring (front eye) bush kit OMESB28 2 2 4 Use with OMESB29/OE springs use OMESB3 MQ (Square Head Lights) 8/84 to 87 F Spring (front eye) bush kit OMESB31 2 2 4 Use with OMESB29 suits OME springs 80 to 87 F Spring (rear eye) bush kit R Spring & shackle bush kit Spring bush OMESB29 OMESB2 OMESB29 2 2 2 1 4 1 4 4 4 F Body mount - bumper area OMESB9090 1 4 F Body mount - cab front OMESB9091 1 4 Suits all wagon to 11/94 & all hardtop models F Body mount - cab centre OMESB9092 1 4 Suits all wagon & hardtop models F Body mount - cab front & centre OMESB9092 2 4 Suits pick up & cab chassis models Caster kit - Control arm Control arm - to axle Control arm - to chassis Spring - eye front/rear & shackle Panhard rod - bush Sway bar - link Coil Packer - 5mm Coil Packer - 10mm Body mount - cab rear to axle Body mount - cab rear to axle Panhard rod - bush Spring - eye front/rear & shackle OMECA77B OMESB0055 OMESB0056 OMESB1 OMESB0054 OMESB2379 OMEGQPF05 OMEGQPF10 OMESB9092 OMESB9092 OMESB0054 OMESB64 1 1 1 2 1 1 4 8 4 6 4 8 2 1 1 2 4 4 4 6 9 4 R Sway bar - link OMESB2379 1 8 9 R Control arm - lower R Control arm - upper R Coil Packer - 5mm Coil Packer - 10mm OMESB0061 OMESB0062 OMEGQPR05 OMEGQPR10 1 1 8 8 9 9 F Body mount - bumper area OMESB9090 1 4 Suits wagon & hardtop, no kit available for cab chassis model F Body mount - cab front OMESB9091 1 4 Suits all wagon & hardtop models OMESB9092 1 4 OMESB9092 OMECA77B OMESB0055 OMESB0056 2 1 1 1 4 4 8 4 MQ All Models PATROL - Y60, GQ 11/87 to 97 F F F F F F F R R R R PATROL - Y61, GU 10/97 on Body mount - cab centre F Body mount - cab front & centre F Caster kit - Control arm - to axle F Control arm - to axle F Control arm - to chassis 1 When remaining stock of OME P/NO P/NO. is exhausted exhausted, no further product will be available available. Page 95 8 8 8 4 8 8 Suits models to 8/02 Suits models 10/02 on Suits OE & OME springs Suits OME springs Suits wagon & hardtops, no kit available for cab chassis Suits leaf spring models Suits coil spring models Suits all wagon models Suits all hardtop models Not suitable before 9/89 Leaf spring models Suits cab chassis models with coil suspension Suits all wagon & hardtop models Suits all cab chassis 8 8 8 OME NO.28 INT JULY 2012 OME P/NO. BUSHES IN KITS DIAGRAM # YEAR F Panhard rod - bush OMESB0054 1 4 8 F Sway bar - link OMESB2379 1 8 8 Suits coil spring models to 2001 F Sway bar - mount 15mm R Body mount - cab centre to axle Body mount - cab centre to axle R Panhard rod - bush OMESB2365 OMESB9092 OMESB9092 OMESB0054 1 2 1 1 2 4 4 4 8 9 R Sway bar - link OMESB2379 1 8 9 R Trailing arm - lower R Trailing arm - upper R Coil Packer - 5mm Coil Packer - 10mm OMESB0061 OMESB0062 OMEGQPR05 OMEGQPR10 1 1 8 8 9 9 LOC'N MODEL KITS REQ SUSPENSION BUSH KIT SELECTION DESCRIPTION NOTES NISSAN (Continued) PATROL - Y61, GU - cont. SUZUKI Jimny SN413 LJ50 LJ80 Sierra SJ410 & SJ413 TOYOTA Runner L Leaff S Spring Frontt & R Rear 4R i F 4 Runner (Surf) LN60, YN60 10/97 on R Coil Packer - 10mm 74 to 6/78 F Spring Bush 74 to 6/78 R Spring Bush 7/78 to 12/81 F Spring Bush R Spring Bush 7/81 to 95 F Spring Bush R Spring Bush OMESB5 OMESB6 2 2 OMESB6 Suits cab chassis models with coil suspension. Suits OE & OME springs Suits OE & OME springs Suits OE & OME springs Suits OE & OME springs Suits OE & OME springs Suits OE & OME springs 6 6 4 4 Suits OE & OME springs Suits OE & OME springs 2 6 4 Suits OE & OME springs OMESB0049 1 2 12 OMESB2915 OMESB3010 1 1 8 4 7 7 Suits LN130, RN130 models Suits VZN130, YN130 models OMESB5 OMESB2915 OMESB6 OMESB5 OMESB6 OMESB5 OMESB0049 OMESB6 2 1 2 2 2 2 1 2 6 8 6 6 6 6 2 6 4 4 4 4 4 4 4 4 Suits OE & OME springs 10/88 to 12/97 F Sway bar - mount 25mm OMESB0049 1 2 1 Spring - bush kit Sway bar - link Sway bar - mount 25mm Spring - bush kit Sway bar - link Sway bar - link Sway bar - mount 25mm Spring - bush kit OMESB43 OMESB2915 OMESB0049 OMESB43 OMESB3010 OMESB3010 OMESB0049 OMESB43 2 1 1 2 1 1 1 2 6 8 2 6 4 4 2 6 4 1 1 4 1 1 1 4 OMESB30 OMESB1 2 2 6 6 4 4 7/84 to 10/85 F Spring - bush kit R Spring - bush kit LN167, 172, RZN169, 174 11/97 on KZN165 12/99 on LandCruiser 40 Series BJ40,, 42,, FJ40,, 45,, ,JH45, , , 47 2 2 2 2 2 2 Does not suit ZD30 wagon Suits all wagon models Suits all hardtop models 4 4 4 4 4 4 4 Runner IFS Front Leaf Spring Rear 4 Runner (Surf) LN61, YN63 11/85 to 9/89 R Spring - bush kit HiLux IFS Front & Coil Spring Rear 4 Runner (Surf) LN130, RN130, VZN130, 10/89 to 6/96 F Sway bar - mount 25mm YN130 R Sway bar - link R Sway bar - link HiLux 4WD Leaf Spring Front & Rear HiLux (Surf) LN36, 46 RN36, 46 4/79 to 10/83 F Spring - bush kit F Sway bar - link R Spring - bush kit HiLux (Surf) LN65, YN 65, 67 11/83 to 9/88 F Spring - bush kit R Spring - bush kit HiLux (Surf) RN105, LN106 10/88 to 11/97 F Spring - bush kit F Sway bar - mount 25mm R Spring - spring bush HiLux 4WD IFS Front & Leaf Spring Rear HiLux (Surf) LN107, 111, RN106, 110, 111 OMESJR10 OMESB25 OMESB25 OMESB19 OMESB19 OMESB19 OMESB19 Suits cab chassis all models & wagon To 02/00 R F F R F F F R p g - bush kit-to suit 15mm ID 1969 to 12/84 F Spring F Spring - bush kit-to suit 18mm ID Page 96 Suits OE & OME springs Suits OE & OME springs Suits OE & OME springs Suits OE & OME springs Suits OE & OME springs Suits OME springs only Suits OME springs only Suits OME springs only Suits 35mm spring p g eye y Suits 35mm spring eye OME NO.28 INT JULY 2012 LandCruiser 60 Series FJ60, 62, HJ60, 62 FJ62, HJ60, 61 LandCruiser 70 Series Bundera (Prado NZ) LJ70, RJ70 BJ70, 73, 74 HJ75 FJ70, 73, 75 FZJ70, 75, HZJ70, 73, 75 BUSHES IN KITS DIAGRAM # TOYOTA (continued) LandCruiser 40 Series - cont. BJ40, 42, FJ40, 45, ,JH45, 47 - cont. OME P/NO. 1969 to 12/84 R Spring - bush kit-to suit 15mm ID OMESB30 2 6 4 R Spring - bush kit-to suit 18mm ID OMESB79 2 6 R Spring - bush kit-to suit 18mm ID OMESB1 2 6 Suits 35mm spring eye Suits 35mm spring eye & 30mm 4 hanger bracket Suits 35mm spring eye 4 YEAR LOC'N MODEL KITS REQ SUSPENSION BUSH KIT SELECTION DESCRIPTION 11/80 to 8/87 F F R R 8/87 to 12/91 F F F R R Spring - bush kit Sway bar - link Spring - bush kit Sway bar - mount 23mm Spring - bush kit Sway bar - link Sway bar - mount 23mm Spring - bush kit Sway bar - mount 23mm OMESB1 OMESB2915 OMESB1 OMESB2327 OMESB1 OMESB2915 OMESB2327 OMESB1 OMESB2327 2 1 2 1 2 1 1 2 1 6 8 6 2 6 8 2 6 2 4 4 4 4 4 4 4 4 4 1/85 to 12/91 F F F F 1/85 to 3/90 F F F F R 1/85 to 3/90 F F F F R 1/85 to 10/92 F F F F F R R R 1/88 to 11/99 F F F F Panhard rod - bush Sway bar - link Sway bar - mount 23mm Sway bar - mount 25mm Spring - bush kit Sway bar - link Sway bar - mount 23mm Sway bbar - mountt 23 23mm S Spring - bush kit Spring - bush kit Sway bar - link Sway bar - mount 23mm Sway bar - mount 23mm Spring - bush kit Spring - bush kit Sway bar - link Sway bar - mount 23mm Sway bar - mount 23mm Sway bar - mount 25mm Spring - bush kit Spring - bush kit Sway bar - mount 25mm Spring - bush kit Sway bar - link Sway bar - mount 23mm Sway bar - mount 25mm 1 OMESB8133 OMESB2361 OMESB2327 OMESB0049 OMESB1 OMESB2361 OMESB2327 O OMESB0063 S OMESB1 OMESB1 OMESB2361 OMESB2327 OMESB0063 OMESB16 OMESB1 OMESB2361 OMESB2327 OMESB0063 OMESB0049 OMESB16 OMESB1 OMESB0095 OMESB1 OMESB2361 OMESB0063 OMESB0049 1 2 1 1 2 2 1 1 2 2 2 1 1 2 2 2 1 1 1 2 2 1 2 2 1 1 4 8 2 2 6 8 2 2 6 6 8 2 2 6 6 8 2 2 2 6 6 2 6 8 2 2 10 10 10 10 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 OMESB0095 1 2 4 OMESB16 OMESB1 2 2 6 6 4 4 R Sway bar - mount 25mm OMESB0095 1 2 4 Spring - bush kit Sway bar - link Spring - bush kit Caster kit Control arm - to chassis OMESB1 OMESB2361 OMESB1 OMECA77B OMESB0050 2 1 2 1 1 6 4 8 4 6 4 4 10 4 10 OMESB2413 1 2 10 F Sway bar - mount 25mm R Spring - bush kit R Spring - bush kit PZJ70, 73 FZJ78, 79, HDJ78, 79, HZJ78, 79 3/90 to 2/91 8/99 on F F R F F F Sway bar - link outer 1 NOTES Suits OE & OME springs Suits OE & OME springs Suits models to 1/90 Suits OE & OME springs Suits models to 8/87 Suits models 8/87 - 1/90 Suit OE & OME springs Suits models to 5/86 Suits S it models d l 6/86 on Suits OE & OME springs Suits OE & OME springs Suits models to 5/86 Suits models 6/86 on Suits OE & OME springs Suits models to 5/86 Suits models 6/86 on Suits FJ75 models to 8/91 Suits FJ70, 73 models Suits bracket height = 38mm Suits OE & OME springs Suits HZJ75 models to 4/91 Suits HZJ75 models to 4/91 Suits 4/91 on bracket height = 38mm Suits FJ75 models Suits HZJ70 & 73 models Suits 4/91 on bracket height = 38mm Suits OE & OME springs Suits OE & OME springs Caster align offset 3 degree Contains new bolts, nuts & crush tubes When remaining stock of OME P/NO. is exhausted, no further product will be available. Page 97 OME NO.28 INT JULY 2012 8/99 on LandCruiser 80 Series FJ80, FZJ80, HDJ80, ,HZJ80 LandCruiser 100 Series FZJ105, HZJ105 Solid Axle 1/90 to 2/98 3/98 on LandCruiser Lexus HDJ100, UZJ100 (Lexus) IFS 3/98 on Tacoma To 2004 DIAGRAM # TOYOTA (continued) LandCruiser 70 Series - cont. FZJ78, 79, HDJ78, 79, HZJ78, 79 - cont. OME P/NO. KITS REQ YEAR OMESB2414 OMESB0046 OMESB3010 OMESB0052 OMESB3010 OMESB0095 1 1 1 1 1 1 2 10 4 10 4 8 4 4 4 4 2 4 Spring - bush kit OMESB86 2 6 4 Spring - bush kit OMESB84 2 6 4 Suits FZJ / HDJ / HZJ79 models with OME springs Spring - bush kit OMESB85 2 6 4 Suits all models with OME springs & greasable shackles OMECA77B OMESB0050 OMESB0046 OMESB0045 OMESB0051 OMESB0044 OMESB0063 OMESB0094 OMESB0091 OMESB0092 OME80PF05 OME80PF10 OMESB0053 OMESB0052 OMESB3010 OMESB0049 1 1 1 2 1 1 1 1 1 1 4 4 4 6 4 4 2 2 2 2 1 1 1 1 4 4 4 2 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 R Sway bar - mount 25mm OMESB0095 1 2 8 R Control arm - lower R Control arm - upper OMESB0047 OMESB0048 1 1 8 8 8 8 OMECA77B OMESB0045 OMESB0050 OMESB0046 OMESB0044 OME80PF05 OME80PF10 1 2 1 1 1 4 6 4 4 2 10 10 10 10 10 F Sway bar - mount 29mm OMESB0092 1 2 10 R R R R R R R R Sway bar - link upper Sway bar - link lower Panhard rod - bush Sway bar - mount 25mm Control arm - lower Control arm - upper Coil Packer - 5mm Coil Packer - 10mm OMESB3010 OMESB0052 OMESB0053 OMESB0095 OMESB0047 OMESB0048 OME80PR05 OME80PR10 1 1 1 1 1 1 4 4 4 2 8 8 8 8 9 8 8 8 F R R R Sway bar - link upper Sway bar - link Spring bush Spring bush OMESB2361 OMESB2915 OMESB88 OMESB89 1 1 2 2 4 8 4 4 7 7 4 4 LOC'N MODEL BUSHES IN KITS SUSPENSION BUSH KIT SELECTION F F R R R F F F F F F F F F F F F R R R R F F F F F F F DESCRIPTION Sway bar - mount 31mm Panhard rod - bush Sway bar - link inner Sway bar - link outer lower Sway bar - link outer upper Sway bar - mount 25mm Caster kit Control arm - to chassis only Panhard rod - bush Control arm - complete kit Sway bar - link upper Sway bar - link lower Sway bar - mount 24mm Sway bar - mount 26mm Swayy bar - mount 26mm Sway bar - mount 29mm Coil Packer - 5mm Coil Packer - 10mm Panhard rod - bush Sway bar - link lower Sway bar - link upper Sway bar - mount 25mm Caster kit Control arm - complete kit Control arm - to chassis only Panhard rod - bush Sway bar - link lower Coil Packer - 5mm Coil Packer - 10mm Page 98 NOTES Suits bracket height = 38mm Suits FZJ / HDJ / HZJ78 models with OME springs Caster align offset 3 degree Suits bracket height = 35mm Suits bracket height = 35mm Suits bracket height g = 38mm Suits bracket height = 38mm Suits bracket height = 35mm Suits large bracket height = 38mm Caster align offset 3 degree STD replacement Suits large bracket (bracket height = 38mm) Suits bracket height = 38mm Suits OME springs p g onlyy Suits original shackles only OME NO.28 INT JULY 2012 DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS Diagram 1. Diagram 2. Diagram 3. Diagram 4. Diagram 5. Diagram 6. Page 99 OME NO.28 INT JULY 2012 DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS Diagram 7. Diagram 8. Diagram 9. Diagram 10. Diagram 11. Diagram 12. Page 100 OME NO.28 INT JULY 2012 APPLICATIONS - SPECIFICATIONS - BUSH KITS NUMERICAL SPRING & SHOCK BUSH Kit No. OMESB1 Component Description spring bush PT260 OMESB2 OMESB6 spring bush PT280 spring bush PT281 spring bush PT282 spring bush PT230 spring bush PT229 spring bush PT240 spring bush PT231 spring bush PT231 2 2 2 4 2 2 4 6 OMESB7 OBSOLETE 6 OMESB8 spring bush PT290 spring bush PT291 spring bush PT292 shock bush SP1178 / 19 shock bush SP056 (cotton reel type) shock bush OME066 / 16 OBSOLETE shock bush SP091 shock bush OME1178 / 16 shock bush OME066 / 19 spring bush PT270 shock bush OME066 / 22 sleeve B17S 22 x 16 x 33 OBSOLETE spring bush PT301 spring bush PT302 sleeve B19S 16 x 13 x 65 2 2 2 4 2 4 4 4 4 4 6 2 2 2 2 4 1 OMESB20 spring bush PT229 6 OMESB25 OMEB27 spring bush PT301 spring bush PT302 spring bush PT303 sleeve 16 x 13 x 65 sleeve 16 x 13.2 x 33 2 2 2 1 2 OMESB28 spring bush PT284 2 OMESB29 spring bush PT285 & sleeve 1 OMESB30 spring bush PT261 spring bush PT229 spring bush PT283 4 2 2 shock bush OME066 / 19 spring bush PT292 spring bush PT291 spring bush PT305 sleeve 19 x 14.2 x 81 shock bush OME 066-19MGQ shock bush 305IY 2 2 2 2 1 2 8 OMESB3 OMESB4 OMESB5 OMEB9 OMEB10 OMEB11 OMEB12 OMEB13 OMEB14 OMEB15 OMESB16 OMEB17 OMEB18 OMESB19 OMESB31 OMEB36 OMESB38 OMEB40 OMEB42 Qty 6 To Fit Toyota 35mm spring eye, 18mm pin OE & OME Series F/H/B, J/ZJ: 75, 74, 73, 70, 60, 47, 45, 42, 40 Nissan GQ Patrol leaf spring models OME only Nissan MQ Patrol all models - rear OE spring Nissan MQ Patrol round headlight models-front OE spring eye OBSOLETE Toyota HiLux all models (except IFS front) Toyota HiLux all models (except SR5 & extra cab rear) Toyota FJ55 all models front & rear, 45 Series Rear only OE springs 30mm eye Mitsubishi Pajero leaf spring models & L200 models Small eye bush with 19mm bore Small eye shock mount Converts large eye 19mm bore to a 16mm bore Pin 12 x 60 replacement bush Pin 10 x 60 replacement bush Small eye with 16mm bore Large eye with 19mm bore 40mm spring eye for Toyota 75 series rear springs Large eye tapered bush with sleeve Converts small eye bush to suit 19mm bore with sleeves Suzuki Sierra all models except LJ50 front & rear springs Toyota LandCruiser 40 series 25mm OE spring front & rear. Toyota 45 series OE front spring only 25mm eye. Suzuki LJ50 front & rear N41 & N81 being converted for fitment to CJ Jeep and Cherokee wagon 83 on front bottom mount. Mahindra front & rear bottom mount. Nissan MQ Patrol early model (round headlights) - front spring, front eye (to be fitted with OMESB29) Nissan MQ Patrol all models - front spring, rear eye (to be fitted with OMESB28) Toyota LandCruiser 45/47 Series front spring with 35mm spring eye and hanger bracket with 15mm pin hole Nissan MQ Patrol late model (square headlights) - front spring, front eye (to be fitted with OMESB29) large eye 19mm bore All Triton to 1997 and L200 - rear - suits OME springs only N101, N22F & N29 Patrol GQ lower mount - rear shock pin 14 x 70 replacement cont. Page 101 OME NO.28 INT JULY 2012 APPLICATIONS - SPECIFICATIONS - BUSH KITS NUMERICAL SPRING & SHOCK BUSH Kit No. OMESB43 OMESB57 OMESB64 Component Description spring bush PT304 spring bush PT309 spring bush PT231 sleeve 19 x 14.1 x 68 spring bush PT306 spring bush PT307 sleeve 19 x 15 x 73 spring bush PT270 spring bush PT260 OMESB75 OBSOLETE OMESB76 OBSOLETE OMEB77 OMEB78 OMESB79 OBSOLETE OBSOLETE spring bush PT308 spring bush PT231A spring bush PT304 spring bush PT231 sleeve 19 x 14 x 68 spring bush PT310 spring bush PT311 sleeve 22 x 18 x 70 spring bush PT281 spring bush PT314 spring bush PT315 sleeve 22 x 17 x 68 spring bush PT291 spring bush PT292 spring bush PT316 sleeve 22 x 16 x 80 spring bush PT317 spring bush PT318 sleeve 20 x 14 x 86 spring bush PT270 spring bush PT317 spring bush PT327 spring bush PT318 spring bush PT319 sleeve 20 x 14 x 86 spring bush PT307 spring bush PT320 spring bush PT321 sleeve 19 x 15 x 73 spring bush PT322 spring bush PT323 spring bush PT322 spring bush PT323 sleeve 18 x 14 x 69 spring bush PT231 spring bush PT282 spring bush PT310 spring bush PT311 spring bush PT326 sleeve 22 x 18 x 70 OMESB80 OMESB81 OMESB82 OMESB83 OMESB84 OMESB85 OMESB86 OMESB87 OMESB88 OMESB89 OMESB90 OMESB91 Qty 2 2 2 1 4 2 1 4 2 2 4 1 2 6 3 4 4 4 2 2 4 1 4 2 1 2 2 2 1 2 2 2 1 2 4 2 4 2 2 2 2 1 2 2 2 1 2 2 2 2 1 4 2 2 2 2 1 To Fit Toyota HiLux IFS extra cab & SR5 dual cab models being fitted with OME18 series spring Jeep Wrangler - front & rear to suit OE shackles Nissan Patrol GQ leaf spring cab chassis OME spring - rear Land Rover Series III 88" & 109" spring & shackle bushes OE replacement - front Land Rover series III 88" & 109" spring & shackle bushes OE replacement - rear Land Rover Series III 88" & 109" lower shock bush - rear Pin 10 x 60mm steering stabiliser mount LandCruiser F/HJ45, 47 LWB models - OME spring Holden / Isuzu Rodeo 1 tonne rear spring to suit OE & OME springs Nissan Navara 1 tonne rear spring to suit OE & OME springs Mazda / Ford 1 Tonne 4x4 1987 on rear spring OME only Mitsubishi Challenger / Montero rear spring to suit OME19 only Toyota LandCruiser 79 Series cab chassis & utility model only suit OME springs only Toyota LandCruiser 78 & 79 Series must be used with OME springs & greasable shackle kit only Toyota LandCruiser 76 & 78 Series Rear suit OME springs with OE shackles. Jeep YJ Wrangler front and rear Use only with greasable shackle OMEGS11 Toyota Tacoma rear shackle bushes only Use with OME springs Toyota Tacoma rear shackle bushes for OEM shackles Holden/Isuzu Jackaroo Trooper 1982-92 rear OME spring Nissan Navara D22 model - rear spring to suit OE & OME springs cont. Page 102 OME NO.28 INT JULY 2012 APPLICATIONS - SPECIFICATIONS - BUSH KITS NUMERICAL SPRING & SHOCK BUSH Kit No. OMESB93 OMESB95 OMESB96 OMESB97 OMESB98 OMESB99 OMESB100 OMESB101 OMESB102 OMESB103 Component Description spring bush PT260 spring bush PT317 spring bush PT326 spring bush PT331 spring bush PT324 spring bush PT325 spring bush PT281 spring bush PT314 spring bush PT333 sleeve 191472 spring bush PT328 spring bush PT329 spring bush PT330 sleeve 19 x 14 x 72 spring bush PT282 spring bush PT326 spring bush PT331 sleeve 18 x 14 x 69 spring bush PT282 spring bush PT324 spring bush PT325 sleeve 18 x 14 x 69 spring bush PT319 spring bush PT327 spring bush PT310 spring bush PT333 spring bush PT336 sleeve 19 x 14 x 72 spring bush PT335 spring bush PT333 spring bush PT336 sleeve 19 x 14 x 72 Qty 4 2 2 2 2 2 2 2 2 1 2 2 2 1 2 2 2 1 2 2 2 1 4 2 2 2 2 1 2 2 2 1 To Fit Toyota LandCruiser HZJ71 & HZJ74 Nissan D40 Navara suits OE shackle kit only Nissan D40 Navara suits OME greasable shackle kit only Mazda BT50 / Ford Ranger 2006 on Toyota HiLux 2005 on to suit OE & OME springs Nissan Navara D40 suits original shackle kit only. Nissan Navara D40 suits OME greasable shackle kit: OMEGS15 Toyota LandCruiser 79 Series suits original shackle & pin from 07/2009 on Ford Ranger PX 2011 on / Mazda BT-50 2011 on suits OE shackle Ford Ranger PX 2011 on / Mazda BT-50 2011 on suits OME greasable shackle kit OMEGS20 Page 103 OME NO.28 INT JULY 2012 SPECIFICATIONS - BUSH KITS OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS Dimensions Part No. PT229 PT230 PT231 PT240 PT260 PT261 PT270 PT280 PT281 PT282 PT283 PT285 PT290 PT291 PT292 PT301 PT302 PT304 PT305 PT306 PT307 PT309 PT310 PT311 PT314 PT315 PT316 PT317 PT318 PT319 PT320 PT321 PT322 PT323 PT324 PT325 PT326 PT327 PT328 PT329 PT330 PT331 PT333 PT335 PT336 D1 32.0 32.0 36.0 36.0 45.0 45.0 50.0 44.0 44.0 52.0 44.0 32.7 45.0 40.0 40.0 50.0 40 0 40.0 52.0 43.0 44.0 50.0 40.0 42.0 52.0 44.0 40.0 43.0 52.0 52.0 52.0 44.0 44.0 40.0 40.0 42.0 42.0 42.0 52.0 39.0 39.0 54.0 42.0 52.0 45.0 42.0 D2 24.9 24.9 30.0 30.0 35.0 35.0 40.0 32.7 32.7 40.0 32.7 None 31.5 28.0 27.5 40.0 30 0 30.0 40.0 31.5 31.4 37.6 30.0 32.6 40.0 32.0 32.7 31.5 39.8 39.8 40.0 31.8 31.8 32.0 30.0 33.0 33.0 33.0 39.8 30.0 30.0 39.5 33.0 39.9 32.0 32.0 d 15.0 15.0 18.0 18.0 18.0 15.0 18.0 18.0 18.0 18.0 18.0 22.0 18.0 16.0 16.0 16.0 13 0 13.0 19.0 19.0 18.1 18.1 18.0 20.1 22.2 18.0 22.2 22.2 18.0 20.0 18.0 18.0 18.0 18.0 18.0 19.0 19.0 20.1 18.0 19.0 19.0 19.0 20.1 19.0 18.0 20.0 Page 104 T 4.5 3.0 3.6 4.0 5.5 4.0 5.4 5.2 4.5 4.4 5.8 None 4.4 5.0 4.2 6.9 44 4.4 4.0 5.5 6.0 6.0 4.0 4.0 4.5 4.5 4.0 5.0 6.0 8.0 9.5 6.5 4.3 4.0 4.5 4.0 4.0 4.0 8.0 4.0 4.0 6.0 4.0 6.0 4.5 4.0 L 35.0 35.0 30.0 48.0 35.0 35.0 35.0 43.0 30.0 30.0 28.5 60.0 35.0 44.0 34.0 25.0 25 0 25.0 30.0 35.0 30.0 30.0 40.5 30.0 30.0 40.0 30.0 35.0 43.5 35.5 35.5 31.5 32.7 45.5 35.5 30.0 44.5 30.0 42.5 30.0 44.5 30.0 44.5 30.0 49.0 49.0 Number of Splines 9 9 9 9 11 9 13 11 11 13 13 0 11 9 9 13 9 9 0 9 0 0 0 9 0 9 0 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 OME NO.28 INT JULY 2012 SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS Part No. Contains Vehicle Position Refer to: FK01 16 x Flat Washer 60 Series Front Manual Sec. 4 GFI - Front suspension installation FK03 2 x Saddle Correction Plate HiLux Petrol Front Manual Sec. 4 GFI - Front suspension installation FK0411 4 x Retainer Spacer 11mm 60 Series Rear Manual Sec. 4 GFI FK0418 4 x Retainer Spacer 18mm 60 Series Rear Manual Sec. 4 GFI FK0422 4 x Retainer Spacer 22mm 60 Series Rear Manual Sec. 4 GFI - Rear suspension installation FK047 4 x Retainer Spacer 7mm 60 Series Rear Manual Sec. 4 GFI - Rear suspension installation FK06 2 x Stabiliser Bar Packer 3mm Suzuki Front Manual Sec. 4 GFI - Front suspension installation FK08 2 x Anti-Inversion Plate 60, 75 Series Front & Rear Manual Sec. 8 Technical - Shackle Modification All 40 & 70 Series GQ, Maverick ute & c/c FK09 2 x Anti-Inversion Plate All HiLux Rear Manual Sec. 8 Technical - Shackle Modification FK10 2 x Short Gussett Plate HiLux Front Manual Sec. 8 Technical - HiLux Front Springs 2 x Long Gussett Plate All models FK13 2 x Anti-Inversion Side Plate All HiLux Rear Manual Sec. 4 GFI FK14 2 x Anti-Inversion Plate Isuzu 1 Tonne P/Up Rear Fitting instructions supplied with kit FK15 2 x Ani-Inversion Side Plate 1997 on HiLux Rear Fitting instructions supplied with kit FK16 2 x 20mm Bump Stop Spacer Wrangler TJ Rear Fitting instructions supplied with kit FK18 2 x Bracket GU Patrol Rear Fitting instructions supplied with kit 3 x Bolt Sway Bar 3 x Washer 3 x Nut FK19 4 x Spacer Plate LandCruiser Front 4 x 35mm Bolt 78 & 79 Models Sway Bar 6 x Spacer Plate Land Rover Discovery Front 8 x Bolt M8 x 1.25 x 35mm 1999 on Models Cross Fitting instructions supplied with kit 4 x Spring Washer FK20 8 x Flat Washer FK21 Fitting instructions supplied with kit Member 1 x Bracket Toyota Rear 2 x Bolt M8 Tacoma Exhaust 2 x Flat Washer Bracket 2 x Hex Nut FK22 2 x Shock Tower Support Mazda / Ford 2 x Captive Nut 1 tonne pickup Front Fitting instructions Front Fitting instructions Fitting instructions 4 x Bolt M10 x 1.5 x 30mm 4 x Flat Washer 4 x Spring Washer FK23 1 x Strut Adaptor Toyota / RAV 4 FK24 2 x Bracket Nissan Y61 Rear 6 x Bolt with stabiliser Sway Bar 11 x Flat Washer bar release 1998 to 2000 6 x Nut Nyloc FK25 2 x Spacer Block Nissan Y61 4 x Bolt Oil Pan Kit Front Fitting instructions 4 x Flat Washer 4 x Spring Washer FK26 2 x Side Plate Isuzu / Rodeo 2003 on Rear Fitting instructions supplied with kit FK27 2 x Support Bracket LandCruiser Torsion Bar Fitting instructions supplied with kit 100 Series Locating IFS Bracket Suzuki XL7 Front FK28 2 x Spacer Fitting instructions supplied with kit 2 x Stud Page 105 OME NO.28 INT JULY 2012 SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS Part No. FK29 Contains 2 x Spacer Vehicle Toyota Position 2 x Bolt M10 x 1.25 x 35mm Tacoma 2005 on Drive Shaft Rear Refer to: Fitting Instructions 2 x Flat Washer M10 x 25mm 2 x Spring Washer M10 x 1/8 FK30 2 x Anti-Inversion Bracket Mitsubishi Rear Fitting Instructions FK31 1 x Bracket Ford F250 & F350 Rear Fitting instructions 6 x Bolt 1999 to 2004 4 x Nut x M10 Dual Cab Models Tundra 2007 on Front Fitting instructions 2 x Nut x M10 Caged 3.3 6 x Spring Washer 10 x Flat Washer FK32 1 x 3199908 Bracket 1 x 3199909 Kit 2 x Bolt M8 x 1.25 x 20 2 x Hex Nyloc Nut 4 x Flat Washer FK33 Spring Bush Installation Tool VK Amarok Front Fitting Instructions FK34 2 x Bracket LandCruiser 78 Series Rear Sway Fitting Instructions FK35 1 x Spacer Ford F250 & F350 2 x Bolt 1999 to 2004 2 x Nut Xtra Cab Bar Mounts Rear Fitting Instructions Front Fitting instructions supplied with kit Jeep JK - LHD Rear Fitting instructions supplied with kit LandCruiser Rear Fitting instructions supplied with kit Rear Fitting instructions supplied with kit 2 x Washer FK36 4 x Bracket Ford F350 8 x Bolt M8 x 1.25 x 20 2005 on 8 x Nut M8 x 1.25 16 x Washer FK37 1 x Bracket 2 x Bump Stop Spacer 1 x Extension Plate 4 x Packer 2 x Bolt M14 x 1.5 2 x Nut M14 x 1.5 8 x Washer 2 x Bolt M12 x 1.25 2 x Nut M12 x 1.25 4 x Bolt M8 x 1.25 x 20 4 x Flanged Nuts M8 x 1.25 FK38 2 x Anti-Inversion Plate 76 Series FK39 1 x Bracket Jeep JK - RHD 2 x Bump Stop Spacer 1 x Extension Plate 4 x Packer 2 x Bolt M14 x 1.5 2 x Nut M14 x 1.5 8 x Washer 2 x Bolt M12 x 1.25 2 x Nut M12 x 1.25 4 x Bolt M8 x 1.25 x 20 4 x Flanged Nut M8 x 1.25 Page 106 OME NO.28 INT JULY 2012 SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS Part No. FK40 Contains 4 x Bump Stop Spacer Vehicle Wrangler JK Position Front & Rear Refer to: Fitting instructions supplied with kit 2 x Bolt M10 x 1.5 x 75 4 x Bolt M8 x 1.25 x 70 4 x Washer 2 x Flanged Nut 4 x Nut Nyloc FK41 2 x Bracket GU Patrol - Leaf Sprung Rear Fitting instructions supplied with kit Assembly Bump Stop Spacer FK42 2 x Sway Bar Packer Xterra 2005 on Rear Fitting instructions supplied with kit Y61 Patrol - Leaf Sprung Rear Fitting instructions supplied with kit LandCruiser 76/78/79 Series Rear Fitting instructions supplied with kit LandCruiser 76/78/79 Series Rear Fitting instructions supplied with kit JK Jeep Front 4 x Bolt M10 x 1.25 x 35 4 x Flat Washer 4 x Spring Washer FK43 4 x Backing Plate 4 x Backing Plate Wear Clip 4 x Bolt M8 x 1.25 4 x Nyloc Hex Lock Nut 4 x Tube Spacer FK44 2 x Saddle Bracket 2 x HD Bar Bracket (1 x RH, 1 x LH) 10 x Flat Washer M8 x 17 10 x Bolt M8 x 1.25 x 25 10 x M8 Spring Washer FK45 2 x Axle Mount Bracket (1 x RH, 1 x LH) 1 x OMEU74 U Bolt 1 x OMEU75 U Bolt 2 x Saddle Bracket 1 x Brake Line Bracket 2 x Dropper Bracket (1 x RH, 1 x LH) 3 x Spacer Wing Mount 1 x Grub Screw M10 x 1.25 x 10 1 x M10 Flat Washer 1 x Nut Flange M10 x 1.25 9 x Flat Washer M8 x 17 9 x BZ Bolt M8 x 1.25 x25 9 x Spring Washer M8 x 3/32 x 3/32 FK46 2 x Front Brake Line Bracket (1 x RH, 1 x LH) 2 x Rear Brake Line Bracket (1 x RH, 1 x LH) Rear 1 x Hand Brake Bracket 6 x Bolt M6 x 1.0 x 20 8.8BZ 10 x Washer M6 x 20 16G 5 x Nyloc Nut M6 x 1 2 x Spring Washer M6 x 2.5 x 1.6 2 x Caged Nut M6 1.7 - 2.5 FK47 1 x Track Bar Bracket JK Jeep LHD Rear 1 x Track Bracket Spacer 2 x U Bolt 1 x Bolt M14 x 1.5PX80 2 x Spacing Washer M14 x 23.5 x 5mm 1 x Nyloc Nut M14 x 1.5 Page 107 OME NO.28 INT JULY 2012 SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS Part No. FK47RHD Contains 1 x Track Bar Bracket Vehicle JK Jeep RHD Position JK Jeep Front Refer to: Rear 1 x Track Bar Bracket Spacer 2 x U Bolt 1 x Bolt M14 x 1.5PX80 2 x Spacing Washer M14 x 23.5 x 5mm 1 x Nyloc Nut M14 x 1.5 FK48 2 x Front Sway Bar Link 2 x Rear Sway Bar Link Rear 2 x Dis-connect Pin 2 x Park Pin 2 x Sway Bar Bracket (1 x RH, 1 x LH) 2 x R-clip 3.0 TZP 2 x Bolt 7/16 x 3 1/2 GR5 4 x Flat Washer 7/16 2 x Spring Washer 6/16 x 5/32 x 3/32 2 x Nut 7/16 2 x Nyloc Nut M12 2 x Nyloc Nut M10 x 1.25 2 x Flat Washer 1/2 x 1 1/8 x 3mm 2 x Flat Washer M10 x 20.6 x 2mm Fitting Grease FK49 8 x Driveline Packer JK Jeep 3 x Crossmember Spacer Front Rear 2 x Flange Bolt M14 x 1.5 x 110 GR10.9 2 x Flange Bolt M14 x 1.5 x 10 GR10.9 4 x Flange Nut Conelock M14 x 1.5 Class 10 3 x Bolt M12 x 1.5 x 50mm 8.8 3 x Flat Washer 1/2 x 1 1/8 x 3mm 3 x Spring Washer 1/2 x 3/16 x 1/8 2 x Cable Tie 4.8 x 200mm FK50 1 x Stabiliser Plate JK Jeep Front Fitting instructions supplied with kit 2 x Brake Prop Bracket LandCruiser 76/78/79 Rear Fitting instructions supplied with kit 2 x Flange Nut M8 x 1.25 BZ Series JK Jeep Front Fitting instructions supplied with kit Ranger / BT-50 Centre 1 x Stabiliser Spacer 1 x Bolt M10 x 1.25 x 25 8.8 1 x Flat Washer M10 x 20.6 x 2mm 1 x Flange Nut M10 x 1.25 FP FK51 2 x Flat Washer M8 x 17 x 1.2 2 x Bolt M8 x 1.25PX20 FK53 4 x Driveline Packer 2 x Flange Bolt M14 x 1.5 x 110 GR10.9 2 x Flange Nut Conelock M14 x 1.5 Class 10 FK57 12 x Flat Washer M14 x 25 x 4 2 x Spring Washer M14 x 4mm x 3mm Bearing 2 x Female Bolt M10 x 25 x 1.5 8.8 FK58 2 x Brake Prop Bracket LandCruiser 76/78/79 2 x Flange Nut M8 x 1.25 BZ Series Rear Fitting instructions supplied with kit 2 x Flat Washer M8 x 17 x 1.2 2 x Bolt M8 x 1.25PX20 4.6 2 x spring Washer M8 x 3/32 x 3/32 Page 108 OME NO.28 INT JULY 2012 SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS Part No. FK59 Contains 1 x Brake Prop Bracket Vehicle HiLux 05 on Position Rear Refer to: Fitting instructions supplied with kit Rear Fitting instructions supplied with kit Manual Sec. 4 GFI Patrol Gearbox Spacer Kit 1 x Bolt M8 x 1.25PX20 8.8 1 x Hex Lock M8 x 1.25 2 x Flat Washer M x 17 x 1.6 1 x Spring Washer M8 x 3/32 x 3/32 FKWTJ01 1 x 45mm Panhard Rod Extended Wrangler FKWTJ02 Mounting Bracket TJ 2 x Spacer Washer 3 x Bolt M12 x 1.25 x 30mm 6 x Flat Washer 3 x Spring Washer 3 x Nut M12 x 1.25 GQGK01 4 x Spacer Plate GQ Patrol Gearbox 8 x Hex. Bolt Maverick Cross Member 4 x Spacer Plate Nissan Y61 Gearbox Fitting instructions 9 x Spacer 12mm Patrol SWB Gearbox Fitting instructions supplied with kit Gearbox Fitting instructions Gearbox Fitting instructions 8 x Flat Washer 8 x Spring Washer GQGK02 8 x Bolt M12 x 1.25 x 70mm 17 x Spring Washer 17 x Flat Washer 6 x Bolt M8 x 1.25 x 40mm 3 x Bolts M8 x 1.25 x 35mm JWGK01 JWGK02 6 x Spacer Plate Jeep 6 x Bolt Spacer Wrangler 6 x 2" Bolt to 2002 6 x Spacer Plate Jeep TJ 6 x Bolt 2003 Manual 17 x Flat Washer Models 17 x Spring Washer JWGK03 8 x Spacer Plate Jeep TJ 8 x Bolt 2003 Auto 8 x Flat Washer Models 8 x Spring Washer Page 109 OME NO.28 INT JULY 2012 SPECIFICATIONS - LEAF SPRINGS ADDING AN EXTRA LEAF Part No. Required Centre Bolt To Suit Dakar Spring No. D1XL D2XL D3XL D4XL D5XL D6XL D7XL D8XL D9XL D10XL D11XL D12XL D13XL D14XL D15XL D16XL D17XL D18XL D19XL D20XL D21XL D22XL D23XL D24XL D25XL D26XL D27XL D28XL D29XL D30XL D31XL D32XL D34XL D35XL D36XL D38XL UCB3 UCB2 UCB8 UCB8 UCB6 UCB6 UCB5 UCB4 UCB17 UCB5 UCB5 UCB1 UCB14 UCB17 UCB11 UCB5 UCB7 UCB14 UCB16 UCB7 UCB7 UCB8 UCB09 UCB09 UCB4 UCB15 UCB17 UCB17 UCB19 UCB10 - CS003F & CS004F CS004RA/B & CS005RA/B CS001F & CS002F CS001R & CS002R CS009R & CS010R CS019R & CS020R & CS021R CS040R CS003R CS026R & CS027R CS042R CS010FA/B CS011R & CS012R CS043R & CS044R CS013R & CS014R & CS045R & CS071R CS016RA/B CS006F CS008FA/B & CS009FA/B CS030R & CS031R & *CS032R CS028R & CS029R CS012FA/B CS038R CS034RA/B & CS035RA/B CS014F CS036R CS006R & CS007R CS062R & CS063R CS048R CS055R CS047R CS016F CS150R CS053R CS049R & CS056R & CS068R & CS069R CS057R CS059R CS064R & CS065R * FK01 U Bolt Thread Spacer Kit required on all Cab Chassis Models. REMOVING A LEAF: In general terms, to reduce a springs rate remove the third leaf from the top of the spring. Except if the third leaf is fitted with a spring clip, in this case remove the fourth leaf. Page 110 OME NO.28 INT JULY 2012 SPECIFICATIONS - LEAF SPRINGS REPLACEMENT MAIN & SECOND LEAF DAKAR PART NUMBER CS001F, CS002F CS003F, CS004F, CS005F CS006F, CS007F CS008FA CS008FB CS009FA CS009FB CS010FA, CS011FA CS010FB, CS011FB CS012FA, CS013FA CS012FB, CS013FB CS014F CS001R, CS002R CS003R CS004RA, CS005RA CS004RB, CS005RB CS006R, CS007R, CS008R CS009R, CS010R CS011R, CS012R CS013R, CS014R, CS015R CS016RA CS016RB CS017RA CS017RB CS018R, CS019R, CS020R, CS021R CS022R, CS023R CS024R, CS025R CS026R, CS027R CS028R, CS029R CS030R, CS031R, CS032R CS033RA CS033RB CS034RA, CS035RA CS034RB, CS035RB CS036R, CS037R CS038R, CS039R CS043R, CS044R, CS045R, CS071R CS049R, CS056R, CS060R CS053R, CS054R CS057R, CS058R, CS070R CS062R CS063R CS064R, CS065R CS066R CS068R, CS069R CS150R, CS151R OME SPRING PART NUMBER FRONT SPRINGS 40 SERIES - OME13, OME131 60 SERIES - OME110, OME11, OME111 75 SERIES - OME67, OME671 HILUX - OME99A HILUX - OME99B HILUX - OME91A HILUX - OME91B PATROL M60 - OME3A, OME31A PATROL M60 - OME3B, OME31B SUZUKI SIERRA - OMES1A SUZUKI SIERRA - OMES1B JEEP YJ - OMEJ1F REAR SPRINGS 40 SERIES - OME14, OME141 45 SERIES - OME201 60 SERIES - OME113A, OME1131A 60 SERIES - OME113B, OME1131B 75 SERIES - OME39, OME391, OME3911, OME39111 HILUX - OME17, OME171, OME1711 PATROL M60 - OME4, OME41 78/79 SERIES - OME49, OME491, OME492, OME493 PATROL Y60 Y60, Y61 CAB CHASSIS - OME61A OME61A, OME611A PATROL Y60, Y61 CAB CHASSIS - OME61B, OME611B HJ60 - OME221A HJ60 - OME221B HILUX - OME180, OME18, OME181, OME1811 TRITON / PAJERO - OME22, OME222 ISUZU / RODEO 2003 - OMEROD4, OMEROD5 MAZDA / FORD UTE - OME26, OME261 ISUZU / RODEO - OMEROD1, OMEROD11, OMEROD111 NAVARA D21, D22 - OMENN1, OMENN11, OMENN2 JEEP XJ - 75mm JEEP XJ - 75mm JEEP XJ - OMEJC1A, OMEJC2A JEEP XJ - OMEJC1B, OMEJC2B JEEP YJ - OMEJ1R, OMEJ2R SUZUKI SIERRA - OMES2, OMES21 HILUX 2005ON RANGER / BT-50 12/2006 TO 2011 TRITON ML & MN 2006 ON 76 SERIES COLORADO, DMAX 2008 ON, RODEO 2003 ON COLORADO, DMAX 2008 ON, RODEO 2003 ON AMAROK 2010 ON 78/79 SERIES RANGER / BT-50 2011 ON NAVARA D40 Page 111 MAIN LEAF PART NUMBER SECOND LEAF PART NUMBER SL1F/1 SL3F/1 SL6F/1 SL8FA/1 SL8FB/1 SL9FA/1 SL9FB/1 SL10FA/1 SL10FB/1 SL12FA/1 SL12FB/1 SL14F/1 SL1F/2 SL3F/2 SL6F/2 SL8FA/2 SL8FB/2 SL9FA/2 SL9FB/2 SL10FA/2 SL10FB/2 SL12FA/2 SL12FB/2 SL14F/2 SL1R/1 SL3R/1 SL4RA/1 SL4RB/1 SL6R/1 SL9R/1 SL11R/1 SL13R/1 SL16RA/1 SL16RB/1 SL17RA/1 SL17RB/1 SL18R/1 SL22R/1 SL24R/1 SL26R/1 SL28R/1 SL30R/1 SL33RA/1 SL33RB/1 SL34RA/1 SL34RB/1 SL36R/1 SL38R/1 SL43R/1 SL49R/1 SL22R/1 SL57R/1 SL62R/1 SL62R/1 SL64R/1 SL13R/1 SL49R/1 SL150R/1 SL1R/2 SL3R/2 SL4RA/2 SL4RB/2 SL6R/2 SL9R/2 SL11R/2 SL13R/2 SL16RA/2 SL16RB/2 SL17RA/2 SL17RB/2 SL18R/2 SL22R/2 SL24R/2 SL26R/2 SL28R/2 SL30R/2 SL33RA/2 SL33RB/2 SL34RA/2 SL34RB/2 SL36R/2 SL38R/2 SL43R/2 SL49R/2 SL53R/2 SL57R/2 SL62R/2 SL63R/2 SL64R/2 SL66R/2 SL49R/2 D31XL OME NO.28 INT JULY 2012 SPECIFICATIONS - LEAF SPRINGS REPLACEMENT CENTRE BOLTS Dimension Details Centre Bolt Head Part No. Diameter A UCB1 17 UCB2 15 UCB3 14 UCB4 14 UCB5 14 UCB6 14 UCB7 14 UCB8 12 UCB09 13 UCB10 14 UCB11 17 UCB12 11 UCB13 14 UCB14 14 UCB15 11.5 UCB16 11 UCB17 14 UCB18 16 UCB19 14 UCB20 16 Head Depth B 10 15 11 8 8 8 5 9 10 8 10 8 6 6 9 8 8 8 8 8 Shank Length C 90 90 70 110 70 80 55 75 55 120 115 70 70 80 72 80 90 50 95 62 Shank Diameter D 9.5 9.5 9.5 9.5 9.5 7.9 7.9 7.9 7.9 9.5 9.5 7.9 9.5 9.5 7.9 7.9 9.5 10 10 10 Thread Length E 50 50 50 50 50 50 35 50 40 40 40 40 40 40 30 40 50 30 45 45 Spring Part No. Thread 3/8 UNF 3/8 UNF 3/8 UNF 3/8 UNF 3/8 UNF 5/16 UNF 5/16 UNF 5/16 UNF 5/16 UNF 3/8 UNF 3/8 UNF 5/16 UNF 3/8 UNF 3/8 UNF 5/16 UNF 5/16 UNF 3/8 UNF M10 M10 M10 CS011R, 12R CS017RA/B CS003F, 04F, 05F CS03R, 04R, 05R, 06R, 07R CS006, 07F, 10F, 11F, 22R, 23R, 40R, 41R, 42R, 53R, 54R CS009R, 10R, 18R, 19R, 20R, 21R CS008F, 09F, 12F, 13F, 38R, 39R CS001F, 02F, 01R, 02R, 33R, 34R, 35R CS014F, 36R, 37R CS008R, 48R CS016R CS028R CS030R, 31R, 32R CS043R, 43R-15, 44R, 45R, 46R CS024R, 25R, 062R, 063R CS029R CS013R, 14R, 15R, 26R, 27R, 47R, 57R, 58R, 64R, 65R CS015F, 018F CS018R, 49R, 50R, 51R, 56R, 150R, 151R CS018F DAKAR SPRING SERVICE PARTS SPRING EYE SLEEVES ID OD PART NUMBER (MM) (MM) CBH154028 15 40 CBH27532569 27.5 32.5 CBH303549 30 35 CBH303559 30 35 CBH31536559 31.5 36.5 CBH31536569 31.5 36.5 CBH32737759 32.7 37.7 CBH354069 35 40 CBH37542559 37.5 42.5 CBH39544559 39.5 44.5 CBH404549 40 45 CBH404559 40 45 CBH404569 40 45 LENGTH (MM) 28 69 49 59 59 69 59 69 59 59 49 59 69 SPRING CLIPS LEAF CLIP PART NUMBER WIDTH WIDTH (MM) (MM) 2512074 70 25 2516474 70 25 CLIP LENGTH (MM) 120 164 BONDED RUBBER BUSHES ID OD PART NUMBER (MM) (MM) CBH14405970 14 40 CBH14406073 14 40 CBH145357889 14.5 35 CBH148517689 14.8 51 CBH16455689 16 45 CBH185396489 18.5 39 CBH18544489 18 54 LENGTH (MM) 59/70 60/73 78/89 76/89 56/89 64/89 44/89 LEAF LINER KITS PART NUMBER DESCRIPTION IL01YE (Round) Inter Leaf Liners x 6 Pieces SLK60 (60mm Wide) Noise - Service Liners x 4 Pieces SLK70 (70mm Wide) Noise - Service Liners x 4 Pieces RIVETS PART NUMBER 3822 3824 Page 112 SIZE 3/8 3/8 LENGTH (MM) 22 24 OME NO.28 INT JULY 2012 SPECIFICATIONS - LEAF SPRINGS U BOLTS OE spring stack height must be compared to OME spring before final U Bolt selection as OE spring stack heights may vary from model to model. PART NO. OMEU51 OMEU52 OMEU53 OMEU53A OMEU53B OMEU54 OMEU55 OMEU56 OMEU57 OMEU58 OMEU58B OMEU59A OMEU59B OMEU59C OMEU59D OMEU60 OMEU61 OMEU61B OMEU62 OMEU63 OMEU64 OMEU65 OMEU66 OMEU66A OMEU66B OMEU67 OMEU68 OMEU69 OMEU69A OMEU70 OMEU70A OMEU71 OMEU72 OMEU73 OMEU76 A LEG LENGTH mm 210 200 168 185 200 175 218 100 190 210 242 197 225 240 197 150 147 160 145 190 260 215 190 210 230 350 275 235 260 205 230 150 200 125 170 B LEG CENTRE mm 85 76 75 75 75 85 97 75 88 110 110 97 97 97 97 81 87 87 73 74 125 97 103 103 102 107 107 95 95 95 95 82 97 91 84 C THREAD DIA mm 14 14 14 14 14 12 14 12 12 14 14 14 14 14 14 11 10 10 10 12 14 14 14 14 14 16 16 14 14 14 14 12 14 10 12 D THREAD LENGTH mm 70 75 70 65 70 70 70 50 70 75 75 75 75 75 90 70 60 70 70 50 90 75 60 60 60 75 75 65 65 55 55 60 90 40 50 Page 113 THREAD PITCH E TOP TYPE 1.5 1.5 1.5 1.5 1.5 1.25 1.5 1.25 1.25 1.5 1.5 1.5 1.5 1.5 1.5 1.27 1.25 1.25 1.25 1.25 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 1.5 1.5 1.25 1.5 SQUARE FLAT SQUARE SQUARE SQUARE ROUND SQUARE SQUARE ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND SQUARE ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND SQUARE SQUARE SQUARE ROUND ROUND SQUARE REC. TORQUE Lbs.ft. 93 93 93 93 93 58 93 58 58 93 93 93 93 93 93 45 34 34 34 58 93 93 93 93 93 145 145 93 93 93 93 58 93 93 93 REC. TORQUE Nm 126 126 126 126 126 79 126 79 79 126 126 126 126 126 126 61 45 45 45 79 126 126 126 126 126 197 197 126 126 126 126 79 126 126 126 OME NO.28 INT JULY 2012 SPECIFICATIONS - LEAF SPRINGS LEAF SPRING TRIM PACKERS (Mild Steel 5mm Thick) PART No. WIDTH LENGTH TP01 TP02 TP03 TP04 TP05 70mm 70mm 60mm 60mm 50mm 140mm 140mm 140mm 140mm 120mm HOLE DIA. APPLICATIONS 10.3mm TOYOTA 60, 75, NISSAN GQ / FORD MAVERICK CAB CHASSIS & NISSAN GQ UTE TOYOTA 40, 42, 45, 47 8.7mm 10.3mm NISSAN MQ, MITSUBISHI PAJERO, TRITON, L200 TOYOTA HILUX, 4RUNNER 8.7mm SUZUKI SIERRA, HOLDEN DROVER 8.7mm To be used to correct left to right trim problems. Maximum 2 plates (10mm). Order centre bolt separately. Refer Manual for Instructions. CLIP LINER KITS FOR LEAF SPRINGS Kit Part No. Contents: Clip Liner Size & Quantity To Suit OME To Suit Dakar CLK11 CLK113A CLK113B CLK13 CLK14 CLK17 CLK18 CLK201 CLK22 CLK221 CLK3 CLK39 CLK4 CLK57 CLK6 CLK9 CLKJ1 CLKJ2 CLKNN CLKROD CLK13D CLK15D CLK26D CLK33D CLK38D CLK40D CLK43D CLK48D CLK55D CLK57D CLK58D 20mm X 4 30mm X 4, 90mm X 2 30mm X 4, 80mm X 2 40mm X 4 30mm X 4, 60mm X 2 35mm X 4, 70mm X 2 30mm X 4, 90mm X 2 40mm X 4, 80mm X 2 35mm X 4, 40mm X 2 20mm X 4, 40mm X 2 30mm X 4 50mm X 4, 4 80mm X 2 40mm X 4 30mm X 4, 35mm X 2 45mm X 4, 95mm X 2 35mm X 2, 30mm X 2 25mm X 4 30mm X 4, 80mm X 2 80mm X 2 30mm X 4, 70mm X 2 35mm X 4 55mm X 4, 150mm X 2 45mm X 2, 95mm X 2 40mm X 4, 85mm X 2 20mm X 4, 65mm X 2 60mm X 2 35mm X 2, 45mm X 4, 85mm X 2 47mm X 2 40mm X 2, 50mm X 2 35mm X 2, 120mm X 2 45mm X 2, 115mm X 2 OME110, 11, 111, J1F OME113A, 1131A OME113B, 1131B OME13, 131 OME14, 141 OME17, 171 OME18, 181, 1811 OME201 OME22, 222 OME221A/B OME3A/B, 31A/B, JC1A/B OME39 391 OME39, 391, 3911 3911, 39111 OME4, 41 OME67, 671 OME6A/B, 61A/B, 611A/B OME91A/B, 99A/B OMEJ1R OMEJC2A/B OMENN1, NN11, NN2 OMEROD1, ROD11, ROD4, ROD5 CS003F, 4F, 5F CS004RA, 5RA CS004RB, 5RB CS001F, 2F CS001R, 2R CS009R, 10R, 28R, 29R, 53R, 54R CS018R, 19R, 20R CS003R CS022R, 23R CS017RA/B CS010FA/B, 11FA/B, 34RA/B CS006R 7R, CS006R, 7R 8R, 8R 68R CS011R, 12R, 49R, 56R, 61R CS006F, 7F CS016RA/B, 42R, 46RA/B, 47R CS008FA/B, 9FA/B CS036R CS035RA/B CS030R, 31R, 32R CS024R, 25R, 62R, 63R CS013FA/B, 14F CS013R, 14R, 15R, 60R, 66R, 69R CS026R, 27R CS033RA/B, 150R, 151R CS038R, 39R CS040R, 41R CS043R, 44R, 45R, 71R CS048R CS055R CS057R CS058R, 70R OME26, 261 INTER-LEAF LINER KIT FOR LEAF SPRINGS IL01YE SLK60 SLK70 6 LINERS PER KIT 4 LEAF SLEEVES TO SUIT 60MM WIDTH 4 LEAF SLEEVES TO SUIT 70MM WIDTH LEAF SPRING CENTRE BOLT SLEEVES Part No. CBS01 CBS02 Length mm 15 10 OD mm 25 19 ID mm 15 16.8 Application LandCruiser 60 series rear GQ Patrol cab chassis front Page 114 OME NO.28 INT JULY 2012 SPECIFICATIONS - LEAF SPRINGS LEAF SPRINGS Dakar Part No. CS001F CS001R CS002F CS002R CS003F CS003R CS004F CS004RA CS004RB CS005F CS005RA CS005RB CS006F CS006R CS007F CS007R CS008FA CS008FB CS008R CS009FA CS009FB CS009R CS010FA CS010FB CS010R CS011FA CS011FB CS011R CS012FA CS012FB CS012R CS013FA CS013FB CS013R CS014F +CS014R +CS015R CS016F CS016RA CS016RB CS017RA CS017RB CS018F *CS018R CS019R CS020R CS021R CS022R +CS023R CS026R OME Part No. OME13 OME14 OME131 OME141 OME110 OME201 OME11 OME113A OME113B OME111 OME1131A OME1131B OME67 OME391 OME671 OME3911 OME99A OME99B OME39111 OME91A OME91B OME17 OME3A OME3B OME171 OME31A OME31B OME4 OMES1A OMES1B OME41 N/A N/A OME491 OMEJ1F +OME492 +OME493 N/A OME611A OME611B OME221A OME221B N/A *OME180 OME18 OME181 OME1811 OME22 +OME222 OME26 Stack Height (mm) 48.0 43.0 54.0 49.0 30.0 81.0 36.0 58.0 58.0 42.0 64.0 64.0 43.0 82.0 49.0 89.0 32.5 32.5 96.0 39.0 39.0 48 48.00 43.0 43.0 54.5 49.0 49.0 56.0 24.4 24.4 63.0 30.0 30.0 68.0 26.0 68.0 76.0 56.0 82.0 82.0 48.0 48.0 58.0 52.5 52.5 59.0 65.5 41.0 58.0 59.0 No. of Leaves 8 5+1 9 6+1 5 6+3 6 6+2 6+2 7 7+2 7+2 7 7+3 8 8+3 5 5 9+3 6 6 4+2 7 7 5+2 8 8 8 4 4 9 5 5 5+2 4 5+2 6+2 8 7+3 7+3 8 8 7 3+3 3+3 4+3 5+3 5+1 6+2 4+3 Eye Dia. mm Front Rear 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 35.0 40.0 30.0 30.0 40.0 30.0 30.0 30.0 30 0 32.5 32.5 30.0 32.5 32.5 32.5 30.0 30.0 32.5 30.0 30.0 40.0 31.4 40.0 40.0 32.7 40.0 40.0 35.0 35.0 51.5 39.0 39.0 39.5 39.0 31.5 31.5 32.7 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 35.0 40.0 30.0 30.0 40.0 30.0 30.0 30.0 30 0 32.5 32.5 30.0 32.5 32.5 32.5 40.0 40.0 32.5 40.0 40.0 40.0 37.6 40.0 40.0 40.0 40.0 40.0 35.0 35.0 41.5 30.0 30.0 30.0 30.0 27.5 27.5 32.7 * These springs have a 20mm lower 2nd Stage than other springs in the series. + These springs have a 20mm higher 2nd stage than other springs in this series Page 115 Weight (kg) 23.0 21.5 27.0 25.6 15.5 45.4 17.7 31.6 31.6 21.5 36.0 36.0 21.6 46.8 25.5 52.2 14.8 14.8 59.5 18.4 18.4 20.0 20 0 18.9 18.9 24.2 22.3 22.3 26.8 8.1 8.1 30.2 10.4 10.4 47.9 11.0 47.9 51.5 27.0 50.8 50.8 25.5 25.5 37.7 25.0 27.3 30.6 31.0 22.0 29.5 26.3 Primary Free Camber mm 165 225 165 225 200 235 196 250 230 196 250 230 220 240 220 240 170 150 240 170 150 230 215 200 230 215 200 275 125 110 275 125 110 268 210 268 268 229 250 235 250 230 202 215 235 235 235 195 195 164 Spring Rate lbf / in 350 300 / 450 398 357 / 496 220 510 / 710 257 268 / 570 268 / 570 305 314 / 617 314 / 617 302 388 / 610 348 455 / 600 208 208 500 / 656 254 254 217 / 388 283 283 285 / 445 343 343 211 207 207 240 247 247 279 / 548 148 279 / 548 325 / 680 337 325 / 585 325 / 585 255 255 431 125 / 485 125 / 485 160 / 540 274 / 571 194 / 388 230 / 570 177 / 616 N / mm 61.3 52.5 / 79 69.8 62.5 / 87 38.5 90 / 125 45 47.0 / 100 47.0 / 100 53.5 55 / 108 55 / 108 53 68 / 107 61 80 / 105 36.5 36.5 88 / 115 44.5 44.5 38.0 38 0 / 68.0 68 0 49.6 49.6 50.0 / 78.0 60 60 37 36.3 36.3 42 27.9 27.9 52 / 96 26 52 / 96 57 / 119 59 57 / 103 57 / 103 44.7 44.7 75.5 22 / 85 22 / 85 28 / 95 48 / 100 34.0 / 68.0 41 / 100 31 / 108 cont. OME NO.28 INT JULY 2012 SPECIFICATIONS - LEAF SPRINGS LEAF SPRINGS Dakar Part No. OME Part No. Stack Height (mm) CS027R CS028R +CS029R CS030R CS031R *CS032R CS034RA CS034RB CS035RA CS035RB CS036R CS037R CS038R CS039R CS040R CS041R CS042R CS043R CS043R-15 CS044R +CS045R CS046RA CS046RB CS047R CS048R CS049R CS050R / CS150R CS051R / CS151R CS053R CS054R CS055R CS056R CS057R CS058R CS059R CS060R CS061R CS062R CS063R CS064R CS065R CS066R CS068R CS069R CS070R CS071R OME261 OMEROD11 +OMEROD111 OMENN1 OMENN11 *OMENN2 OMEJC1A OMEJC1B OMEJC2A OMEJC2B OMEJ1R OMEJ2R OMES2 OMES21 OME19 OME191 OME36 N/A N/A N/A N/A OME15A OME15B N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 65.5 48.0 60.5 52.5 59.0 52.5 32.5 32.5 37.0 37.0 32.5 32.5 36.0 42.0 29.0 35.0 45.0 50.0 50.0 50.0 57.0 52 0 52.0 52.0 57.0 50.0 45.0 59.0 67.0 35.0 41.0 65.0 37.0 59.0 66.0 55.0 70.0 58.0 60.0 64.0 58.0 69.0 92.0 66.0 74.0 83.0 64.0 No. of Leaves 5+3 4+2 4+3 3+3 4+3 3+3 5 5 4+1 4+1 5 5 3+2 4+2 3+1 4+1 4+1 4+2 4+2 4+2 5+2 5+2 5+2 5+2 3+2 4+1 4+2 5+2 4+1 5+1 4+2 3+1 4+2 5+2 4+1 5+2 4+2 5+2 5+2 4+2 5+2 8+2 5+2 6+2 7+2 6+2 Eye Dia. mm Front Rear 32.7 39.0 39.0 40.0 40.0 40.0 62.0 62.0 62.0 62.0 37.6 37.0 40.0 40.0 31.5 31.5 46.8 40.0 40.0 40.0 40.0 40.5 40 5 40.5 40.0 40.0 40.0 40.0 40.0 31.5 30.0 40.0 40.0 40.0 40.0 51.0 40.0 40.0 39.0 39.0 60.0 60.0 40.0 40.0 40.0 40.0 40.0 32.7 30.0 30.0 32.5 32.5 32.5 43.5 43.5 43.5 43.5 31.4 31.0 30.0 30.0 27.5 27.5 31.0 30.0 30.0 30.0 30.0 30.0 30 0 30.0 40.0 40.0 32.7 33.4 33.4 27.5 27.5 40.0 32.7 40.0 40.0 43.0 32.7 32.7 30.0 30.0 46.0 46.0 40.0 32.7 32.7 40.0 30.0 Weight (kg) 30.1 22.5 25.4 22.1 25.5 22.1 18.2 18.2 20.9 20.9 13.7 13.8 9.8 12.3 16.4 16.4 28.0 24.0 24.0 24.0 27.5 26.7 26 7 26.7 32.4 32.5 25.0 30.9 36.3 20.3 24.3 36.5 20.0 36.6 42.8 22.9 33.1 24.9 26.0 28.0 39.2 48.2 59.6 33.1 37.0 50.0 31.1 Primary Free Camber mm 164 250 250 170 170 170 230 205 235 210 205 185 175 175 211 211 210 194 179 204 204 222 209 207 275 173 177 177 193 193 190 173 225 260 265 138 208 223 226 266 266 266 158 143 253 199 Spring Rate lbf / in 217 / 662 170 / 457 216 / 616 126 / 531 165 / 571 126 / 411 148 148 137 / 257 137 / 257 188 188 171 / 291 228 / 348 148 / 245 200 / 296 228 / 310 170 / 340 170 / 340 170 / 340 204 / 361 114 / 194 114 / 194 182 / 392 225 / 416 212 / 450 192 / 481 244 / 535 166 / 321 209 / 365 205 / 330 147 / 371 234 / 627 300 / 694 242 / 338 277 / 608 186 / 352 215 / 459 294 / 610 169 / 445 267 / 582 412 / 679 277 / 608 338 / 707 408 / 684 258 / 434 N / mm 38 / 116 30 / 80 38 / 108 22 / 93 29 / 100 22 / 72 26 26 24 / 45 24 / 45 33 33 30 / 51 40 / 61 26 / 43 35 / 52 40 / 55 30 / 60 30 / 60 30 / 60 35.8 / 63.8 20 / 34 20 / 34 32 / 69 39 / 73 37 / 79 34 / 84 43 / 94 29 / 56 37 / 64 36 / 58 26 / 65 41 / 110 53 / 122 43 / 59 49 / 107 32.7 / 61.7 38 / 80 52 / 107 30 / 78 47 / 102 72 / 119 49 / 106 59 / 124 71 / 120 42 / 76 Free Camber is measured from top of eye (not centre line) to main leaf at centre bolt. Allow 3mm tolerance either side. * These springs have a 20mm lower 2nd Stage than other springs in the series. + These springs have a 20mm higher 2nd stage than other springs in this series Page 116 OME NO.28 INT JULY 2012 SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number 2105 2106 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2516 2517 2518 2519 2520 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2538 2539 2540 2601 2602 2603 2604 2605 2606 X5K Steel X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Bar Dia. mm 19 21 17 17 18 19 19 19.5 18 18 19 19 19 19.5 14.5 15 16 15 14.5 15 15 15 15 17 15 13.5 17.5 14.5 16 16 14.5 15.5 15 16 15 15 14.5 19 16 14.5 16 14 12 16 17 14 17 17 13.5 16 18 16 17 17 18 18 Free Height mm A B 475 485 460 470 460 445 485 470 510 495 510 495 535 520 560 545 505 515 530 540 555 565 480 490 505 515 530 540 385 385 350 350 350 350 342 342 355 355 330 330 330 330 338 338 315 315 360 360 360 360 345 345 305 305 345 345 270 270 280 280 325 325 355 355 360 360 300 300 255 255 340 340 385 385 385 385 310 310 375 375 335 335 315 315 310 310 450 450 360 360 370 370 265 260 265 260 345 345 300 300 350 350 392 392 410 410 400 400 315 315 320 320 Number Of Turns 9.0 8.3 8.0 8.0 9.5 7.7 7.7 8.3 9.0 9.0 10.75 7.7 7.7 8.3 5.4 7.3 6.0 7.0 5.4 7.3 5.1 5.1 5.6 5.4 7.15 6.6 6.25 6.63 4.7 4.7 8.6 5.7 6.6 8.0 5.7 5.75 6.25 5.0 5.5 7.51 7.25 6.5 7.75 11.0 7.4 7.5 6.5 6.5 5.9 7.0 8.35 8.22 7.0 6.0 7.75 7 75 7.75 Page 117 Coil weight (kg) 8.5 11.3 6.1 6.1 8.3 8.5 8.5 9.9 7.5 7.5 10.0 8.5 8.5 9.9 3.4 4.3 4.3 4.1 3.4 4.3 3.4 3.5 3.6 4.7 4.1 2.8 4.1 3.3 3.5 3.5 3.4 4.1 3.9 4.1 2.8 3.8 3.5 6.5 3.5 3.6 4.2 3.0 2.4 5.3 5.1 3.3 3.9 3.9 2.7 3.7 5.5 5.6 6.4 5.5 5.1 51 5.1 Spring Rate lbf / in N / mm 350 61 400 / 440 70 / 77 250 44 250 44 250 44 290 51 290 51 290 51 300 52 300 52 300 52 280 49 280 49 280 49 155 27 175 31 245 43 185 32 155 27 175 31 180 32 180 32 180 32 250 44 180 32 190 33 500 88 250 44 260 46 260 46 340 60 190 33 180 32 500 88 200 35 215 38 190 33 240 42 310 54 230 40 350 61 230 40 140 25 355 62 330 58 200 35 650 114 650 114 180 32 420 74 650 114 180 32 188 33 227 38 730 128 730 128 OE Spring Rate Lbs 160 170 200 200 200 180 180 180 160 160 160 170 170 170 130 130 130 130 130 130 130 160 160 200 140 160 420 200 200 200 280 140 150 440 160 160 150 180 260 180 300 190 100 260 280 160 450 450 150 350 540 150 140 140 680 680 cont. OME NO.28 INT JULY 2012 SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2640 2641 2642 2643 2700 2701 2702 2703 2704 2705 2720 2721 2722 2723 2724 2725 2730 2731 2743 2744 2745 2746 2751 2752 2754 2755 2760 2761 2762 2763 2764 X5K Steel X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Bar Dia. mm 16.5 16.5 19 20 18 20 20 20 13 14 15 16 14 15 14 14.5 15 15 17 13 14 14 14 15 17 17.55 17.5 18 14 14.5 18 19 18.5 19 18 19 18.5 18.5 19 20 21 22 15.5 15.5 21 18 19 20 15 17 20 18 15 15 17.5 18 16 Free Height mm A B 370 370 380 380 440 440 430 430 310 310 415 415 435 435 425 425 510 510 490 490 430 430 435 435 515 515 450 450 520 520 375 375 375 375 365 365 345 345 500 500 475 475 505 505 505 505 405 405 375 375 305 305 310 310 540 540 460 460 420 420 425 425 430 430 435 435 410 410 415 415 420 410 440 430 440 430 450 440 445 435 445 435 315 315 300 300 360 360 400 400 390 390 370 370 390 380 440 440 435 435 435 435 395 385 400 390 420 410 420 410 430 420 Number Of Turns 9.5 9.5 8.0 8.0 7.75 10.99 10.99 10.99 10.0 10.5 7.0 7.75 10.5 9.0 9.55 7.0 6.1 6.1 8.5 10.0 10.5 10.5 9.55 7.0 9.9 99 7.4 7.4 10.5 9.0 8.75 9.48 9.48 9.48 8.8 9.5 8.42 8.42 7.2 7.2 7.2 7.71 5.4 5.0 8.6 9.7 9.7 8.6 6.57 9.0 6.9 6.8 9.0 7.5 8.6 7.8 8.0 Page 118 Coil weight (kg) 5.3 5.3 7.8 8.7 5.1 8.9 8.9 8.9 3.7 4.6 4.1 5.3 4.6 4.5 4.1 3.6 3.8 3.8 4.8 3.7 4.6 4.6 4.1 4.1 5.9 59 4.5 4.8 4.6 4.2 5.7 6.9 6.6 6.9 6.6 6.9 8.8 8.8 8.0 8.9 9.8 11.6 3.5 3.1 8.7 6.5 7.2 7.9 3.9 7.7 8.3 6.5 5.2 4.4 7.0 6.7 5.4 Spring Rate lbf / in N / mm 480 84 480 84 390 68 460 81 730 128 740 130 740 130 740 130 120 21 135 24 160 28 175 31 135 24 200 35 150 26 210 37 200 35 200 35 540 95 120 21 135 24 135 24 150 26 160 28 580 102 730 128 790 139 135 24 175 31 625 109 720 126 625 109 720 126 625 109 720 126 270 / 350 47 / 61 270 / 350 47 / 61 275 48 340 59 400 70 440 77 240 42 280 49 800 140 530 93 670 117 680 119 225 39 175 / 200 31 / 35 420 74 300 52 180 / 250 32 / 44 200 35 300 / 340 52 / 60 360 63 220 39 OE Spring Rate Lbs 450 450 330 330 680 680 680 680 120 120 100 100 120 120 120 160 160 160 460 120 120 120 120 100 88 670 670 120 100 500 500 500 500 500 500 170 170 170 170 170 170 200 200 600 480 480 600 200 200 240 240 160 160 170 200 200 cont. OME NO.28 INT JULY 2012 SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number 2765 2766 2767 2768 2770 2776 2777 2779 2780 2781 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2802 2803 2838 2850 2850J 2851 2853 2856 2859 2860 2861 2862 2863 2863J 2864 2865 2866 2868 2869 2870 2871 2872 2873 2874 2875 2876 2880 2881 2882 2883 2884 2885 2886 2887 2888 X5K Steel X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Bar Dia. mm 22 16 16 20 16 14 14.5 15.5 18.5 17 16 17 16 14 15 16 16 16 13 13 16 16 16 18 16 16.55 17 16 16.5 16 16 17 16 17 18 18.5 19 17 18 20 16.5 14 16 14 16 15 17 14 16 16 16.5 16.5 16.5 16.5 17.5 16.5 16.5 Free Height mm A B 410 410 420 420 385 375 560 560 480 470 410 390 395 375 385 375 470 460 425 415 280 280 378 378 280 280 435 435 350 350 260 255 285 285 255 250 350 350 400 400 353 353 445 445 465 465 420 410 495 505 515 525 475 485 485 485 465 465 470 470 480 490 480 490 460 470 480 490 505 515 480 490 460 460 465 465 480 490 380 380 370 355 410 400 400 400 455 455 408 408 440 440 390 375 365 365 375 375 395 395 375 375 390 390 395 395 402 402 400 400 405 405 Number Of Turns 8.0 7.52 6.66 11.0 10.0 7.0 7.24 7.29 8.68 7.7 7.25 9.35 7.25 9.3 5.2 7.25 6.0 7.25 10.0 10.2 5.5 11.31 10.7 7.5 9.0 90 9.9 8.18 10.13 10.0 9.25 6.88 10.4 9.0 7.0 7.7 7.2 6.88 9.0 7.15 9.8 8.5 7.25 9.0 8.25 9.0 8.3 8.5 10.2 10.2 11.1 9.75 9.75 9.75 10.6 9.75 9.75 Page 119 Coil weight (kg) 11.7 5.0 4.5 10.3 6.5 3.6 4.0 4.6 9.0 5.9 3.9 5.2 3.9 4.1 3.7 4.2 4.0 4.2 2.7 3.2 4.5 5.9 5.5 7.7 6.2 62 7.3 5.3 6.2 5.3 5.3 6.0 6.8 7.8 6.9 9.2 7.8 6.0 8.8 8.8 4.7 3.6 4.9 3.9 5.6 4.5 6.4 3.6 4.7 4.7 5.3 4.7 4.7 4.7 5.9 4.7 4.7 Spring Rate lbf / in N / mm 540 95 250 44 285 50 450 79 260 45 160 28 180 32 225 39 250 / 340 43 / 59 290 51 410 72 500 87 410 72 155 27 165 29 420 73 360 63 420 73 340 59 210 36 200 35 320 56 340 59 205 / 290 36 / 51 220 38 220 38 220 38 275 48 230 40 275 48 220 38 220 38 240 42 250 43 265 46 320 56 220 38 240 / 300 42 / 52 360 63 590 103 220 38 220 38 190 33 200 35 220 38 240 42 200 35 500 87 500 87 500 87 590 103 590 103 590 103 660 115 590 103 590 103 OE Spring Rate Lbs 240 220 200 220 160 150 150 150 160 160 380 400 380 130 120 330 330 330 300 180 150 205 205 160 160 160 160 160 210 210 170 160 160 170 170 170 170 170 170 500 160 160 160 160 160 170 160 490 490 490 500 500 500 590 500 500 cont. OME NO.28 INT JULY 2012 SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number 2889 2890 2891 2892 2895 2895E 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2910 2911 2912 2913 2914 2915 2917 2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2947 2948 X5K Steel X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Bar Dia. mm 16.5 14.5 15.5 17 16.5 17 18 19 18 19 15 16 18 16 15 17 15 17 16 17 16 15 15 18 18 21 22 15 14 16 14 16 19 16 16 16 16 16 14 14 14 14 14 14 15 15 18 16 14 15 15.5 15 15 16 16 16 Free Height mm A B 400 400 440 430 425 415 400 390 390 390 375 375 390 390 390 390 400 400 400 400 405 395 395 385 340 340 380 380 410 410 313 313 390 380 370 370 295 295 400 390 400 390 420 420 390 390 330 330 345 345 345 335 338 328 430 430 430 430 385 385 360 360 395 395 340 340 385 385 392 392 394 394 410 410 420 420 475 465 510 500 480 470 495 485 510 500 420 410 420 410 400 400 400 390 525 515 380 370 390 375 380 365 370 360 395 385 350 340 340 340 340 340 Number Of Turns 6.21 9.7 9.5 8.9 6.21 6.75 6.75 6.75 6.75 6.75 6.36 6.25 8.35 7.3 6.8 6.0 9.0 5.25 7.25 7.5 7.5 10.8 9.3 8.1 8.1 81 7.25 7.25 10.8 8.0 6.8 6.1 6.8 8.1 10.77 10.77 10.3 6.8 10.8 9.8 11.9 11.2 11.2 10.0 9.8 10.0 7.25 7.5 11.65 8.6 7.2 6.58 8.6 8.0 7.5 5.8 5.56 Page 120 Coil weight (kg) 4.6 5.0 5.6 6.4 4.6 5.4 6.1 6.9 6.1 6.9 4.1 4.6 5.5 5.0 4.2 4.6 5.0 5.0 4.2 6.9 6.0 5.7 4.9 5.5 5.5 55 8.4 9.3 5.7 3.7 5.2 3.3 5.2 6.2 5.2 5.2 5.0 5.3 6.5 4.2 5.1 4.8 4.8 4.3 4.1 4.8 4.1 7.7 6.6 3.7 4.4 4.2 4.3 4.4 4.7 4.4 4.2 Spring Rate lbf / in N / mm 260 45 190 33 210 37 380 67 260 45 260 45 318 56 387 68 318 56 387 68 180 32 220 38 650 114 210 37 170 30 360 63 220 38 213 37 368 64 150 / 260 26 / 45 140 / 230 24 / 40 180 / 300 31 / 52 180 / 300 31 / 52 650 114 650 114 700 / 900 112 / 158 860 / 1000 151 / 175 200 / 280 35 / 49 190 33 200 35 140 25 200 35 790 138 375 66 375 66 400 70 200 35 240 / 300 42 / 53 162 28 140 25 140 25 140 25 160 28 180 32 220 39 220 39 205 / 290 36 / 51 220 39 190 33 140 25 160 28 230 40 190 33 240 42 170 30 200 35 OE Spring Rate Lbs 150 150 150 150 150 150 150 150 150 150 140 140 560 160 140 300 160 160 300 160 160 160 160 580 580 650 650 160 160 150 120 150 580 320 320 320 150 180 140 140 140 140 140 140 170 170 160 170 140 140 140 150 165 170 150 150 cont. OME NO.28 INT JULY 2012 SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number 2949 2950 2951 2952 2953 2954 2955 2956 2959 2960 2961 2962 2963 2965 2966 2967 2968 2969 2970 2971 2972 2972E 2973 2974 2974E 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999 3027 3028 3029 3030 3033 3034 3035 X5K Steel X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Bar Dia. mm 17 16 15 11 16 12 13 16 16 15 13 16 11.5 11.5 12 12 14 12 17 17 16 16 16 16 16 16 16 20 20.5 20.5 19 21 19 20 21 21 21 22 22.4 18 19 17 18 21 22 17.5 18 18 18.5 18.5 17 17 20 18 21 22 Free Height mm A B 370 355 300 300 290 290 345 345 285 285 340 340 350 350 330 330 310 310 300 300 340 340 320 320 350 350 365 365 335 315 325 325 370 370 360 360 395 385 405 395 400 385 404 404 415 400 385 370 385 385 425 410 440 425 370 370 370 370 375 375 490 470 480 460 470 450 480 455 480 455 480 460 500 500 500 500 500 500 370 370 365 365 355 345 345 335 335 325 350 340 370 355 360 360 365 365 365 365 325 325 430 420 440 430 435 425 430 420 505 485 505 485 Number Of Turns 7.1 8.5 8.5 8.3 8.5 8.5 10.0 8.5 8.5 8.5 10.0 8.5 10.0 10.0 10.0 9.0 9.35 9.5 6.7 6.66 6.55 6.55 6.55 6.55 6.55 6 55 7.45 7.2 7.6 7.6 7.6 9.0 9.0 9.0 9.0 9.0 7.0 8.2 8.1 8.2 8.9 8.9 7.15 6.6 7.25 7.25 7.1 8.72 8.72 8.72 7.6 8.5 8.5 7.5 8.0 9.0 8.1 Page 121 Coil weight (kg) 5.6 4.0 3.5 1.8 4.1 2.2 3.0 4.2 4.0 3.5 3.0 4.0 2.4 2.4 2.5 2.4 3.7 2.5 5.2 4.5 4.5 4.5 4.5 4.5 4.5 45 5.0 4.9 7.1 7.6 7.6 10.0 12.3 10.0 11.1 12.3 9.8 10.0 11.0 11.5 6.3 7.1 5.8 6.0 8.4 9.3 6.0 5.5 5.5 5.8 5.4 6.1 6.1 9.0 7.0 12.4 12.4 Spring Rate lbf / in N / mm 216 38 540 95 440 77 142 25 540 95 180 32 200 35 500 88 540 95 440 77 200 35 540 95 146 26 146 26 176 31 176 31 210 37 170 30 320 56 320 56 250 44 250 44 250 44 250 44 250 44 220 39 220 39 730 128 790 138.5 790 138.5 250 44 300 53 250 44 300 / 400 44 / 70 360 / 450 63 / 79 470 82 540 94.7 610 107 680 119 530 93 630 110 240 42 280 49 700 / 900 123 / 158 860 / 1000 151 / 175 250 44 800 140 800 140 840 140 800 140 330 58 330 58 270 / 330 47 / 58 320 56 300 52 470 82 OE Spring Rate Lbs 160 420 420 120 420 140 140 420 440 410 150 440 120 120 120 120 120 150 160 160 160 160 160 160 160 160 160 650 650 650 200 200 200 200 200 200 380 380 380 440 440 190 190 600 600 200 700 700 700 680 250 250 190 / 280 N/A N/A N/A cont. OME NO.28 INT JULY 2012 SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number 3036 3037 3038 3039 3040 3043 3046 3047 3048 3049 3051 3052 2GQ02A 2GQ02AM 2GQ02B 2GQ02C 2GQ02CM 2GQ02D 2GQ02G 2GQ02J 2GQ02LP X5K Steel X X X X X X X X X X X X X X X X X X X X X Bar Dia. mm 18 21 22 17 19 19 15.5 14.5 18 20 17 20 18 18 19 18 17 18 19 20 19 Free Height mm A B 455 445 530 510 530 510 520 530 505 515 530 540 490 490 545 545 350 350 505 515 545 555 530 540 465 465 505 490 445 445 480 465 485 470 480 480 475 460 480 465 475 445 Number Of Turns 8.0 9.0 8.1 9.9 8.3 8.3 9.81 10.74 8.72 8.3 9.9 8.3 9.0 8.7 9.0 9.0 9.0 9.0 9.0 9.0 9.0 Coil weight (kg) 7.0 12.4 12.4 7.3 9.2 9.2 5.4 5.2 5.5 10.3 7.3 10.3 9.0 8.7 10.0 9.0 7.9 9.0 10.0 11.1 10.0 Spring Rate lbf / in N / mm 320 56 300 52 470 82 220 38.5 250 44 250 44 200 35 150 26 800 140 320 56 220 38.5 320 56 200 35 220 / 240 39 / 42 250 / 280 44 / 49 200 35 170 / 190 30 / 33 200 35 220 / 350 39 / 61 280 / 310 49 / 54 250 / 280 44 / 49 OE Spring Rate Lbs N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 180 180 180 180 180 180 180 180 180 X5K MICRO-ALLOYED SPRING STEEL is a new generation high strength spring steel grade designed to withstand higher operating stresses with superior resistance to sag and improved toughness and corrosion fatigue properties. These properties are enhanced by additions of Silicon, Chromium, Vanadium Nickel along with lower Carbon than conventional spring steel grades. Page 122 OME NO.28 INT JULY 2012 SPECIFICATIONS - SHOCK ABSORBERS NITROCHARGER SPORT Part Number Nitrocharger Sport 60000 60001 60002 60003 60004 60005 60006 60007 60008 60009 60010 60011 60012 60013 60013L 60014 60015 60015L 60016 60017 60018 60019 60020 60021 60022 60023 60024 60024L 60025 60025L 60026 60027 60028 60029 60030 60031 60032 60033 60034 60035 60036 60037 60037L 60038 60039 60039L 60040 60041 60042 60043 60044 60045 60046 Note: Open Length (mm) Closed Length (mm) Type Replacement Upper Mount Bush Kit Type Replacement Lower Mount Bush Kit 443 443 612 612 580 580 600 597 524 589 652 657 496 496 555 657 657 716 376 559 617 582 625 325 363 624 587 627 587 627 593 545 545 615 615 385 597 581 311 560 559 553 593 560 560 600 345 478 352 660 640 642 565 298 298 368 368 356 356 373 373 319 349 403 403 301 301 322 403 403 426 262 350 359 354 378 215 239 380 368 388 368 388 368 338 338 368 368 250 365 354 208 345 339 329 349 346 346 366 225 304 232 397 390 382 334 P4203 P4203 P4204 P4204 P4184 P4184 E4005 E4005 P4184 P4169 E4005 E4005 P4184 P4184 P4184 E4005 E4005 E4005 E4051-S E4001 P4184 P4158 P4184 P4169 P4205 E4005 E4005-S E4005-S E4005-S E4005-S E4005-S P4169 P4169 P4204 P4204 P E4001 P4158 P4205 E4001 E4001 P4184 P4184 E4005 E4005 E4005 P4169 P4169 P4169 E4005 E4005 E - TB P4169 N/A SMP493 SMP493 SMP493 N/A SMP569 SMP649 SMP649 OMEB42 OMEB13 OMEB15 OMEB15 OMEB42 OMEB42 OMEB42 OMEB36 OMEB36 OMEB36 N/A OMEB14 OMEB42 N/A OMEB42 OMEB13 OMEB13 OMEB15 N/A N/A N/A N/A N/A OMEB13 OMEB13 N/A N/A OMEB13 OMEB14 N/A OMEB13 OMEB14 OMEB14 OMEB42 OMEB42 OMEB40 OMEB40 OMEB40 OMEB13 OMEB13 OMEB13 OMEB15 OMEB15 N/A N/A E4050-BS E4050-BS E4005 E4005 E4005 E4005 E4005 E4005 P4184 E4005 E4005 E4005 P4184 P4184 P4184 E4005 E4005 E4005 E4051-S E4063-S P4184 E4040-BS E4005 E4026-S E4050 E4005BS E4005-T E4005-T E4005-BS E4005-BS E4005-BS E4005 E4005 E4005 E4005 E4026-S E4001 E4051-BS E4026-S E4001 E4001 P4184 P4184 P4184 P4184 P4184 E4026-S E4001 E4005-S E4005 E4005 E-S E4026-TB 110-110-090 110-110-090 OMEB40 OMEB40 OMEB40 OMEB40 SMP649 SMP649 OMEB42 OMEB36 OMEB15 OMEB15 OMEB42 OMEB42 OMEB42 OMEB40 OMEB40 OMEB40 N/A N/A OMEB42 N/A OMEB36 OMEB10 TBA N/A N/A 110-110-066 N/A 110-110-066 OMEB15 OMEB15 OMEB40 OMEB40 OMEB10 OMEB14 N/A OMEB10 OMEB14 OMEB14 OMEB42 OMEB42 SMP683 SMP683 N/A OMEB10 OMEB17 OMEB17 OMEB15 OMEB15 N/A N/A Dirt Shield Part Number 384006170 384006170 384006250 384006250 384006250 384006250 384006250 384006250 384006210 384006250 384006290 384006290 384006210 384006210 384006250 384006290 384006290 384006290 384006250 384006290 384006250 384006250 OME412422 OME412422 384006250 384006250 384006250 384006250 384006250 384006250 384006210 384006210 384006250 384006250 OME412422 384006250 384006250 OME412422 384006250 384006250 384006250 384006250 384006250 346006250 346006250 OME412422 384006210 OME412422 384006290 384006250 384006250 Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. The last Th l t 3 numbers b off the th Dirt Di t Shield Shi ld Part P tN Number b iindicates di t th the llength th off th the di dirtt shield. hi ld See page 130 for legend of mount types. Page 123 cont. OME NO.28 INT JULY 2012 SPECIFICATIONS - SHOCK ABSORBERS NITROCHARGER SPORT Part Number Nitrocharger Sport 60047 60047L 60048 60049 60049L 60050 60051 60052 60052L 60053 60053L 60054 60055 60056 60057 60058 60059 60060 60061 60062 60063 60064 60065 60066 60066L 60066M 60067 60067L 60068 60069 60070 60070L 60071 60071L 60072 60073 60074 60075 60076 60077 60078 60080 60081 60082 60083 60084 60085 60086 60087 60088 60089 60090 60091 Note: Open Length (mm) Closed Length (mm) Type Replacement Upper Mount Bush Kit Type Replacement Lower Mount Bush Kit 565 678 559 559 622 659 339 565 678 559 622 644 496 503 559 619 523 528 485 587 588 594 581 580 693 646 619 706 509 576 617 667 625 673 383 549 517 523 523 583 583 603 603 602 602 560 560 603 535 580 569 508 599 334 392 338 338 366 389 224 344 392 338 366 384 301 312 339 369 329 318 294 357 348 360 356 348 404 382 368 422 314 362 359 381 378 387 254 334 333 329 329 354 354 368 368 368 368 350 350 368 330 355 338 308 360 P4169 P4169 E4026-TB E4026-TB E4026-TB E4001 P4169 P4169 P4169 E4026-T E4026-TB E4005 P4184 E4001 E4001 E4001 E4001 P4205 P4169 E4005 P4169 E4005 E4005 P4184 P4184 P4184 E-TB E-TB P4169 E4057-S P4184 P4184 P4184 P4184 P4169 P4169 E4005-S E4001 E4001 P4205 P4205 P4184 P4184 E E P P P4184 P4170 E4057-S E-4032-S E4005 P4205 N/A N/A N/A N/A N/A OMEB14 OMEB13 N/A N/A 110-110-089 N/A OMEB36 OMEB42 OMEB14 OMEB14 OMEB14 OMEB14 OMEB13 OMEB13 OMEB15 OMEB13 OMEB15 OMEB15 OMEB42 OMEB42 OMEB42 N/A N/A OMEB13 N/A OMEB42 OMEB42 OMEB42 OMEB42 OMEB13 OMEB13 OMEB17 OMEB14 OMEB14 OMEB13 OMEB13 SMP569 SMP569 N/A N/A N/A N/A SMP569 N/A N/A N/A OMEB15 OMEB13 E4026-TB E4026-TB E4026-S E4026-S E4026-S E4001 E4026-T E4026-T E4026-TB E4026-S E4026-S P4169 P4184 E4005-S E4001 E4001 E4005-S E4050 E4026-S E4005 E4005 E4005 E4005 E E E E E E4005 E4005-S P4184 P4184 E4005 E4005 E4005-S E4005 E4005 E4005-S E4005-S E4005-S E4005-S E4005 E4005 E E E E E4005 E4026-T E4001 P4169 P4169 E4026-S N/A N/A N/A N/A N/A OMEB14 110-034-078 110-110-088 N/A OMEB10 OMEB10 OMEB13 OMEB42 OMEB17 OMEB14 OMEB14 OMEB17 OMEB15 OMEB10 OMEB15 OMEB36 OMEB15 OMEB15 N/A N/A N/A N/A N/A OMEB15 N/A OMEB42 OMEB42 OMEB36 OMEB36 OMEB17 OMEB36 OMEB15 OMEB17 OMEB17 OMEB15 OMEB15 OMEB40 OMEB40 N/A N/A N/A N/A OMEB40 N/A OMEB10 OMEB13 OMEB13 N/A Dirt Shield Part Number 384006250 384006250 384006290 OME412422 384006250 384006290 384006210 384006210 384006250 384006250 384006210 384006250 384006210 384006250 384006250 384006250 384006250 384006250 384006290 384006290 384006210 384006250 384006290 384006290 384006250 384006290 141-032-028 384006250 384006210 384006210 384006210 384006250 384006250 384006250 384006250 384006250 384006250 384006250 384006250 384006210 384006250 384006250 384006210 384006250 Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. Th last The l t 3 numbers b off the th Dirt Di t Shield Shi ld Part P tN Number b iindicates di t th the llength th off th the di dirtt shield. hi ld See page 130 for legend of mount types. Page 124 cont. OME NO.28 INT JULY 2012 SPECIFICATIONS - SHOCK ABSORBERS NITROCHARGER SPORT Part Number Nitrocharger Sport 60092 60093 60094 60095 60096 60097 60098 60099 60101 60102 60109 60110 60111 60112 61012 61014 61029 61030 90000 90001 90002 90003 90004 90005 90006 90007 90008 90009 90010 90011 90012 90013 90014 90015 90016 90017 90019 90020 90021 91005 Note: Open Length (mm) Closed Length (mm) Type Replacement Upper Mount Bush Kit Type Replacement Lower Mount Bush Kit 565 562 469 442 531 493 625 509 624 624 685 559 665 580 496 657 615 615 543 404 548 390 473 613 474 474 426 316 543 548 615 615 458 458 543 613 505 505 543 613 345 343 291 284 342 315 365 329 380 380 420 350 400 356 301 403 368 368 413 273 413 287 340 432 330 330 306 204 413 413 485 485 297 297 413 432 368 368 412 432 P14969 E4003 P4184 P4169 E4005 E4001 P4169 E4001 E4005 E4005 E4005 E4001 E4005 P4184 P4184 E4005 P4204 P4204 P P P P P P4214 N/A P P P P P P P P P P P4124 P P P P4124 OMEB13 N/A OMEB42 OMEB13 OMEB15 OMEB14 OMEB13 OMEB14 OMEB15 OMEB15 OMEB15 OMEB14 OMEB15 N/A OMEB42 OMEB36 N/A N/A SMP671 N/A SMP626 N/A N/A Use OE Bushes N/A N/A N/A N/A N/A SMP626 SMP698 SMP698 OE OE N/A OE OE OE SMP671 OE E4026-T E4026-S P4184 E4005 E4005 E4001 E4026-S E4026-S E4005-BS E4005-BS E4005 E4063S E4005 E4005 P4184 E4005 E4005 E4005 E4050-S N/A E4050-S E4063-BS E4050-B E4066 E4055BS E4055BS E4055BS N/A E4050-S E4050-S N/A N/A E E E4050-S E4066 E E E4050-S E4066 N/A OMEB10 OMEB42 OMEB15 OMEB15 OMEB14 OMEB10 OMEB10 N/A N/A OMEB15 N/A OMEB15 OMEB40 OMEB42 OMEB40 OMEB40 OMEB40 110-110-060 110-110-100 110-110-060 110-110-100 110-110-060 N/A N/A 110-110-075 N/A N/A 110-110-112 110-110-060 N/A N/A N/A N/A 110-110-112 N/A N/A N/A 110-110-060 N/A Dirt Shield Part Number 384006250 384006250 384006210 384006170 384006210 384006210 384006290 384006210 384006250 384006250 384006290 384006250 384006290 384006250 384006210 384006290 384006250 384006250 TBA N/A N/A Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. The last 3 numbers of the Dirt Shield Part Number indicates the length of the dirt shield. See page 130 for legend of mount types. Page 125 OME NO.28 INT JULY 2012 SPECIFICATIONS - SHOCK ABSORBERS NITROCHARGERS UPPER MOUNT BUSH KIT Part Number Open Closed Length Length Nitrocharger (mm) (mm) Type Original Kit Bushes only Replacement LOWER MOUNT BUSH KIT Type Original Kit Bushes only Replacement 110-034-072 N/A 110-034-064 OMEB36 N15/N15C 517 327 E4005-S E4005 SMP374 OMEB42 SMP487 110034078 N16 477 352 P4184 E4078-T SMP488 11003478 110-034-074 N/A N17 632 382 E4026-T E4026-S SMP474 OMEB13 110-034-056 OMEB10 N18 340 225 P4169 E4026-S SMP345 OMEB42 SMP345 OMEB42 N19/N19C 492 292 P4184 P4184 SMP345 OMEB42 SMP345 OMEB42 N21 492 292 P4184 P4184 SMP363 OMEB36 SMP363 OMEB40 N22F 656 396 E4005 E4005 SMP345 OMEB42 SMP345 OMEB42 N23F 492 292 P4184 P4184 SMP517 OMEB36 SMP474 OMEB13 N25 642 377 E4005 P4169 SMP474 OMEB13 N/A OMEB10 N26F 381 245 P4169 E4026-S 110-034-069 OMEB40 SMP683 SMP683 N27 560 340 E4005 P4184 SMP474 OMEB13 SMP343 OMEB36 N28 504 309 P4169 E4005 SMP363 OMEB36 SMP363 OMEB40 N29/N29C 656 396 E4005 E4005 110-034-065 OMEB14 110-034-065 OMEB14 N30 618 368 E4001 E4001 OMEB14 110-034-065 OMEB14 *110-034-065 N30E 659 389 E4001 E4001 N/A N/A N/A N/A N31S 501 318 N/A N/A SMP474 OMEB13 N/A OMEB10 N32 500 315 P4169 E4026-S SMP476 OMEB13 110-034-056 OMEB10 N33 625 365 P4169 E4026-S 110-034-065 OMEB14 110-034-056 OMEB10 N34 509 329 E4001 E4026-S SMP476 N/A 110-110-088 110-110-088 N35/N35C 568 348 P4169 E4026-T 110-110-089 110-110-089 110-034-056 OMEB10 N36/N36C 562 342 E4026-T E4026-S 110-110-054 N/A 110-110-054 N/A N37 591 366 E4040-S E4040-S N/A N/A N/A N/A N38S 473 339 P E-B SMP476 SMP476 110-110-088 110-110-088 N39/N39C 562 342 P4169 E4026-T 110-034-076 N/A 110-034-056 OMEB10 N40/N40C 556 336 E4003 E4026-S 110-034-065 OMEB14 110-034-065 OMEB14 N41 499 309 E4001 E4001 110-034-065 OMEB14 110-034-065 OMEB14 N42 594 359 E4001 E4001 SMP474 OMEB13 110-034-065 OMEB14 N43 485 295 P4169 E4001 110-034-069 OMEB40 SMP683 SMP683 N44 560 340 E4005 P4184 SMP343 OMEB42 SMP343 OMEB42 N45F 554 324 P4184 P4184 110-034-069 OMEB40 SMP683 SMP683 N46 560 340 E4005 P4184 SMP474 OMEB13 SMP474 OMEB13 N47 406 251 P4169 P4169 110-034-065 OMEB14 SMP474 OMEB13 N48 560 335 E4001 P4169 SMP474 OMEB13 SMP474 OMEB13 N49 446 271 P4169 P4169 SMP474 OMEB13 110-034-064 OMEB36 N50 584 349 P4169 E4005 SMP474 OMEB13 110-034-181 110-034-181 N51 365 235 P4169 E4026-BS SMP334 OMEB12 110-A42-071 OMEB10 N52/N52F 425 265 P4161 E4026-S 110-004-040 N/A 110-034-181 110-034-181 N53/N53C 628 378 E4040-B E4026-S *110-034-065 OMEB14 110-034-065 OMEB14 N54 554 339 E4001 E4001 SMP334 OMEB12 110-A42-071 OMEB10 N55 585 345 P4161 E4026-S *SMP516 OMEB14 SMP516 OMEB14 N56 554 339 E4001 E4001 SMP474 OMEB13 N/A OMEB10 N57G 340 225 P4169 E4026-S SMP474 OMEB13 N/A OMEB10 N58 325 215 P4169 E4026-S *SMP516 OMEB14 SMP516 OMEB14 N59 559 339 E4001 E4001 SMP474 OMEB13 110-110-078 110034078 N60G 340 225 P4169 E4026-T SMP363 OMEB17 110-034-056 OMEB10 N61/N61C 607 367 E4005-S E4026-S 110-034-065 OMEB14 110-034-077 OMEB17 N62G 507 317 E4001 E4005-S SMP474 OMEB13 110-034-077 OMEB17 N63G 478 299 P4169 E4005-S SMP474 OMEB13 110-034-077 OMEB17 N64/N64C 478 299 P4169 E4005-S SMP474 OMEB13 110-034-056 OMEB10 N65 385 245 P4169 E4026-S SMP476 N/A 110-110-088 N/A N66/N66C 568 335 P4169 E4026-TB 110-110-089 N/A 110-034-056 OMEB10 N67 562 339 E4026-TB E4026-S 110-034-064 OMEB15 110-034-064 OMEB15 N68 640 384 E4005 E4005 Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. *Spacer Kit SMP511 also supplied supplied. ** Units with build date between 6/2007 - 05/2008 use SMP374 cont. See page 130 for legend of mount types Page 126 OME NO.28 INT JULY 2012 SPECIFICATIONS - SHOCK ABSORBERS NITROCHARGERS UPPER MOUNT BUSH KIT Part Number Open Closed Length Length Nitrocharger (mm) (mm) Type Original Kit Bushes only Replacement LOWER MOUNT BUSH KIT Type Original Kit Bushes only Replacement 110-034-064 OMEB15 110-034-064 N68E 660 394 E4005 E4005 110-034-064 OMEB36 SMP343 N69 470 290 E4005 P4184 SMP403 OMEB42 SMP403 N70 614 354 P4184 P4184 SMP403 OMEB42 110-034-064 N71E 620 370 P4184 E4005 SMP474 OMEB13 110-034-064 N72F 548 329 P4169 E4005 SMP501 OMEB42 SMP501 N73 614 354 P4184 P4184 SMP501 OMEB42 110-034-064 N74E 620 370 P4184 E4005 110-034-064 OMEB15 110-034-064 N75 640 390 E4005 E4005 110-034-064 OMEB15 110-034-064 N75E/N75F 652 397 E4005 E4005 110-034-064 OMEB15 110-034-064 N76 685 408 E4005 E4005 110-110-077 N/A SMP474 N77 570 340 E4032-S P4169 110-034-064 OMEB15 110-034-064 N78 447 287 E4005 E4005 110-034-064 OMEB36 SMP474 N79 507 307 E4005 P4169 SMP474 OMEB13 110-034-072 N80 352 232 P4169 E4005-S 110-034-065 OMEB14 110-034-065 N81 499 309 E4001 E4001 SMP474 OMEB13 SMP381 N83 345 225 P4169 E4026-S SMP474 OMEB13 N/A N84 485 295 P4169 E4026-S 110-034-064 OMEB15 110-034-064 N85 587 357 E4005 E4005 SMP474 OMEB13 110-034-064 N86/N86C 539 329 P4169 E4005 SMP474 OMEB13 110-034-072 N87 352 232 P4169 E4005-S SMP474 OMEB13 110-034-064 N88 589 349 P4169 E4005 **110-034-065 OMEB14 110-034-065 N89 594 359 E4001 E4001 110-034-064 OMEB15 110-034-064 N90 582 357 E4005 E4005 SMP415 N/A 110-110-060 N91S 470 335 PE4050-B SMP415 N/A 110-110-060 N91SC 470 335 PE4050-B SMP474 OMEB13 110-034-064 N92 589 349 P4169 E4005 SMP474 OMEB13 N/A N93 485 295 P4169 E4026-S 110-034-064 OMEB15 110-034-064 N94 587 357 E4005 E4005 **110-034-065 OMEB14 110-034-065 N95 599 359 E4001 E4001 SMP474 OMEB13 SMP474 N96 431 261 P4169 P4169 110-034-065 OMEB14 SMP474 N97 545 325 E4001 P4169 SMP474 OMEB13 110-034-072 N98 389 249 P4169 E4005-S SMP493 N/A 110-110-090 N100 440 290 P4203 E4050-BS SMP493 SMP493 110-034-063 N101/N101C 610 360 P4204 E4005 SMP474 OMEB13 110-110-090 N102 482 302 P4169 E4050-BS N/A N/A N/A N103S 504 318 PN/A 110-110-054 N/A 110-110-069 N104/N104C 641 391 E4040-S E4055-S SMP474 OMEB13 110-004-074 N105 508 318 P4169 E4026-S SMP501 OMEB42 SMP501 N106/N106C 537 317 P4184 P4184 110-110-066 N/A 110-110-067 N107/N107C 608 373 E4005-S E4005-T 110-110-066 N/A 110-110-066 N108/N108C 593 363 E4005-S E4005-BS Use OE Bushes N/A 110-110-075 N109S 472 327 N/A E4055BS SMP641 N/A 110-110-076 N110 575 350 P4158 E4040-BS SMP312 N/A SMP487 N111 548 328 P4170 E4026-S SMP474 OMEB13 110-034-064 N112 449 279 P4169 E4005 110-034-064 OMEB15 110-034-064 N113 537 337 E4005 E4005 SMP345 OMEB42 SMP345 N114 475 285 P4184 P4184 SMP343 OMEB42 SMP343 N115 554 324 P4184 P4184 110-034-065 OMEB14 110-034-072 N116 527 327 E4001 E4005-S 110-110-085 N/A 110-034-020 N117 578 358 E4057-S E4001-T SMP474 OMEB13 110-034-080 N118 532 322 P4169 E4005 SMP483 SMP483 N/A N119S 596 395 N/A N/A 110-039-058 110039058 N/A NC120 609 402 N/A N/A Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. *Spacer Kit SMP511 also supplied supplied. ** Spacer Kit SMP495 supplied See page 130 for legend of mount types Page 127 OMEB15 OMEB42 OMEB42 OMEB36 OMEB36 OMEB42 OMEB36 OMEB15 OMEB15 OMEB15 OMEB13 OMEB15 OMEB13 OMEB17 OMEB14 OMEB10 OMEB10 OMEB15 OMEB15 OMEB17 OMEB36 OMEB14 OMEB15 110-110-060 110-110-060 OMEB36 OMEB10 OMEB15 OMEB14 OMEB13 OMEB13 OMEB17 110-110-090 OMEB40 N/A N/A N/A OMEB10 OMEB42 N/A 110-110-066 N/A N/A N/A OMEB15 OMEB15 OMEB42 OMEB42 OMEB17 OMEB10 OMEB11 N/A N/A cont cont. OME NO.28 INT JULY 2012 SPECIFICATIONS - SHOCK ABSORBERS NITROCHARGERS UPPER MOUNT BUSH KIT Part Number Open Closed Length Length Nitrocharger (mm) (mm) Type Original Kit Bushes only Replacement LOWER MOUNT BUSH KIT Type Original Kit Bushes only Replacement SMP483 SMP483 N/A N121S 576 389 N/A N/A 110-039-058 110039058 N/A NC122 589 402 N/A N/A SMP483 SMP483 N/A N123S 596 395 N/A N/A SMP483 SMP483 N/A N124S 576 389 N/A N/A SMP363 SMP363 N/A N125S 411 289 P N/A SMP363 SMP363 N/A N126S 411 289 P N/A SMP354 SMP354 N/A N127S 601 385 P E-BS SMP474 OMEB13 SMP489 N128 358 238 P4205 E4026-T Use OE Bushes N/A 110-110-075 N129S 472 327 P E4055-BS SMP497 SMP497 N/A NS130 333 201 P N/A SMP497 SMP497 N/A NS131 333 201 P N/A 110-110-085 N/A 110-110-086 N132 573 359 E4057-S E4005-S SMP493 SMP493 110-110-090 N133 443 287 P4203 E4050-BS 110-110-085 N/A 110-110-086 N134 559 349 E4057-S E4005-S SMP483 SMP483 N/A N135S/N136S 602 393 P N/A SMP546 N/A NC138 609 400 P SMP633/626 N/A 110-110-060 N139S 543 405 P E4050-S SMP633/626 N/A 110-110-060 N140S 543 405 P E4050-S SMP569 N/A SMP621 N141 577 353 P4184 E4005 SMP569 N/A SMP621 N142 577 353 P4184 E4005 N/A N143S 590 408 P N/A N144S 590 408 P SMP625 N/A NC145 651 439 P SMP641 N/A 110-110-093 N146 655 379 P E4055-BS SMP640 N/A 110-110-060 N147S 476 362 P E4050-S SMP640 N/A 110-110-060 N148S 476 362 P E4050-S 110-110-092 N/A 110-110-092 N149 504 313 E4051-BS E4051-BS SMP474 OMEB13 110-034-056 N150 388 242 P4205 E4026-S SMP474 OMEB13 110-034-056 N151 308 202 P4205 E4026-S SMP641 N/A 110-110-076 N152 576 345 P4158 E4051-BS SMP474 OMEB13 110-034-074 N153 528 312 P4205 E4026-S 110-034-065 OMEB14 110-034-065 N154 562 336 E4001 E4001 SMP474 OMEB13 110-034-065 N155 568 332 P4205 E4001 Nut only OEM OEM N156S 365 530 N/A Nut only OEM OEM N157S 365 530 N/A Nut only OEM OEM N158S 405 610 N/A Nut only OEM OEM N159S 405 610 N/A SMP546 SMP546 N/A NC160 601 403 P N/A SMP625 & 633 SMP625 & 633 N/A NC161 572 386 P N/A SMP474 OMEB13 110-034-056 N162 348 222 P4205 E4026-S SMP625 & 633 SMP625 & 633 N/A NC163 617 386 P N/A SMP501 OMEB42 SMP501 N164 527 317 P4184 P4184 110-034-064 OMEB15 110-034-064 N165 657 397 E4005 E4005 SMP633 & 626 SMP633 & 626 110-110-060 N166S 543 411 P E4050-S SMP633 & 626 SMP633 & 626 110-110-060 N167S 543 411 P E4050-S SMP649 SMP649 SMP649 N168 600 370 E4005 E4005 SMP649 SMP649 SMP649 N169 600 370 E4005 E4005 SMP474 OMEB13 110-034-056 N170 348 322 P4205 E4026-S SMP474 OMEB13 SMP650 N171 532 316 P4205 E4005 SMP474 OMEB13 SMP650 N172 532 316 P4205 E4005 N/A N/A N/A N173S 481 301 P SMP343 SMP343 SMP343 N174 597 341 P4180 P4180 110-034-063 OMEB36 SMP343 N175 603 363 E4005 P4180 110-110-066 N/A SMP343 N176 535 319 E4055-S P4180 Note: Bush the bush, B h kits kit with ith partt numbers b starting t ti with ith SMP indicate i di t the th kits kit have h th urethane th b h mounting ti nutt & washers. h See page 130 for legend of mount types Page 128 N/A N/A N/A N/A N/A N/A N/A N/A 110-110-075 N/A N/A N/A 110-110-090 N/A N/A 110-110-060 110-110-060 OMEB40 OMEB40 N/A N/A N/A N/A 110-100-060 110-110-060 N/A OMEB10 OMEB10 N/A OMEB10 OMEB14 OMEB14 OEM OEM OEM OEM N/A N/A OMEB10 N/A OMEB42 OMEB15 110-110-060 110-110-060 SMP649 SMP649 OMEB10 OMEB15 OMEB15 N/A SMP343 SMP343 SMP343 cont. OME NO.28 INT JULY 2012 SPECIFICATIONS - SHOCK ABSORBERS NITROCHARGERS UPPER MOUNT BUSH KIT Part Number Open Closed Length Length Nitrocharger (mm) (mm) Type Original Kit Bushes only Replacement LOWER MOUNT BUSH KIT Type Original Kit Bushes only Replacement 110-110-066 N/A SMP343 N177 485 299 E4055-S P4180 110-034-080 110-034-080 110-A42-124 N178 600 364 E4005 E4005-S 110-034-080 110-034-080 100-A42-124 N179 790 456 E4005 E4005-S 110-034-080 110-034-080 110-A42-124 N180 690 406 E4005 E4005-S SMP501 OMEB42 SMP501 N181 537 317 P4184 P4184 SMP474 OMEB13 110-034-056 N182 608 352 P4205 E4026-S SMP633 N/A 110-110-100 N183S 390 281 PE4063-BS 110-110-076 N/A 110-110-076 N184 379 255 E4051-S E4051-S 110-043-065 OMEB14 110-110-100 N185 567 341 E4001 E4063-S N/A N/A 110-110-075 N186S 426 298 PE4055-BS SMP475 OMEB13 TBA N187 360 240 P4205 E4050 N188S 110-034-064 OMEB15 110-034-080 N189 600 360 E4005 E4005BS 110-110-085 N/A 110-110-086 N190 658 394 E4057-S E4005-S SMP474 OMEB13 110-034-064 N191 589 349 P4205 E4005-S SMP659 SMP659 110-110-101 N192S 589 424 PE4055-BS SMP493 110-110-102 N193 661 391 P4203 E4040-BS SMP475 OMEB13 TBA N194 360 240 P4205 E4050 SMP493 110-110-103 N195 560 340 P4204 E4051-S SMP374 OMEB42 TBA N196 576 348 P4184 E-TBA 110-034-064 OMEB15 110-034-064 N197 652 397 E4005 E-4005 TBA TBA TBA N198 615 375 E-TBA E-TBA SMP493 SMP493 110-110-090 N199 440 290 P4203 E4050-BS SMP493 SMP493 110-034-063 N200 610 360 P4204 E4005 SMP633/626 SMP633/626 110-110-060 N201S 543 405 PE4050-S SMP569 SMP569 SMP621 N202 577 353 P4184 E4005 Use OE Bushes N/A 110-110-075 N203S 472 327 P E4055-BS SMP641 N/A 110-110-076 N204 576 345 P4158 E4051-BS SMP665 N/A 110-110-092 N205 507 312 P4213 E4051-BS Nut only N/A N/A N206S 602 399 PN/A Nut only N/A N/A N207S 602 399 PN/A Use OE Bushes Use OE Bushes N/A N208S 608 433 P4214 E4066 SMP493 N/A 110-034-063 N209 610 360 P4204 E4005 SMP493 N/A 110-034-063 N210 610 360 P4204 E4005 SMP374 OMEB42 110-034-181 N211 576 348 P4184 E4026 110-110-105 N/A 110-034-181 N212 618 375 E4053 E4026 110-034-003 N/A 110-034-003 OME007 600 359 E4004 E4003 110-034-065 OMEB14 110-034-065 OME013 473 292 E4001 E4001 110-034-065 OMEB14 110-034-065 OME014 495 305 E4001 E4001 SMP333 OMEB13 110-034-065 OME015 415 256 P4175 E4001 110-034-003 N/A 110-034-003 OME018 585 359 E4003 E4003 110-034-065 OMEB14 110-034-065 OME023 429 270 E4001 E4001 SMP333 OMEB13 110-034-065 OME025 415 256 P4175 E4001 SMP333 OMEB13 110-034-065 OME027 497 297 P4175 E4001 SMP474 OMEB13 110-110-009 OME028 450 281 P4169 E4028-S 110-110-009 N/A 110-110-009 OME029 502 314 E4028-S E4028-S 110-110-009 N/A 110-110-009 OME030 470 302 E4028-S E4028-S SMP333 OMEB13 110-034-065 OME031 627 379 P4175 E4001 SMP333 OMEB13 110-034-065 OME032 608 369 P4175 E4001 SMP636 OMEB13 110-034-072 OME033 615 382 PE4005-S SMP333 OMEB13 110-034-065 OME034 481 284 P4175 E4001 110-034-065 OMEB14 110-034-065 OME035 495 299 E4001 E4001 Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. See page 130 for legend of mount types Page 129 SMP343 OMEB11 OMEB11 OMEB11 OMEB42 N/A N/A N/A N/A N/A TBA OMEB15 N/A TBA TBA OMEB15 TBA 110-110-090 OMEB40 110-110-060 OMEB40 110-110-075 N/A N/A N/A N/A 110-110-110 OMEB40 OMEB40 110-034-181 110-034-181 N/A OMEB14 OMEB14 OMEB14 N/A OMEB14 OMEB14 OMEB14 N/A N/A N/A OMEB14 OMEB14 OMEB17 OMEB14 OMEB14 OME NO.28 INT JULY 2012 SPECIFICATIONS - SHOCK ABSORBERS SHOCK ABSORBER MOUNT TYPES Mount Type Pin Part No. P4161 P4169 P4170 P4175 P4184 P4203 P4204 P4205 Dimensions (mm) Thread Length X Dia 62 x M10 x 1.5 53 x M10 x 1.25 73 x M10 x 1.5 58 x M10 x 1.5 71 x M12 x 1.25 85 x M14 x 1.5 77 x M14 x 1.5 54 x M10 x 1.25 OME Replacement Part No. OMEB13 OMEB13 OMEB13 OMEB13 OMEB42 Use original Use original OMEB13 Mount Type Eye Part No. E4001 E4003 E4005 E4026 E4028 E4032 E4040 E4050 E4055 E4057 T-CROSS PIN MOUNTING B-BONDED BUSH Dimensions (mm) Mounting Kit OD x ID x L Replacement Part No. 37 x 25.3 x 24.3 OMEB14 42.6 x 37.7 x 19.5 Not available 44.2 x 31.7 x 30 OMEB36 *OMEB40 37 x 27 x 25 OMEB10 Not available 38.4 x 25.1 x 23 46.7 x 36.6 x 33 Not available 46 x 37 x 30 Not available 45 x 39 x 35 Not available 50 x 40.2 x 34 Not available 42 x 32.5 x 29 Not available S-BUSH WITH SLEEVE *Special Bush for N22F, N29/N29C Lower Rear Mount SPECIFICATIONS - SHOCK ABSORBERS TORSION BARS Part Number 303001 303002 303003 303004 303005 303006 303007 303008 303009 303010 303011 303012 303013 303014 A ± 2.0 1160 1210 1065 1000 925 1365 890 1205 1277.5 1277.5 1307.5 1142 1024 1225 B ± 0.15 30.4 32.8 23.4 24.5 25.7 27.5 26.7 26.0 25.5 27.3 27.5 26.0 27.0 30.3 C +0 -0.2 47.0 47.0 33.0 33.0 30.75 30.0 30.0 30.0 30.0 30.0 30.0 36.0 30.8 37.9 C Spline No. 46 46 43 43 40 39 39 39 39 39 39 47 40 6 side hex D +0 -0.2 47.0 47.0 30.75 33.0 30.75 30.75 30.0 30.0 30.75 30.75 30.75 36.0 30.75 37.85 D Spline No. 46 46 40 43 40 40 39 39 40 40 40 47 40 6 side hex All dimensions in millimetres (mm) Page 130 OME NO.28 INT JULY 2012 SPECIFICATIONS - STABILISERS STEERING STABILISERS Part Number OMESD01 OMESD02 OMESD11 OMESD16 OMESD17 OMESD21 OMESD22 OMESD23 OMESD24 OMESD30 OMESD31 OMESD32 OMESD33 OMESD34 OMESD35 OMESD36 OMESD40 OMESD47 OMESD48 Upper Mount Type (mm) Eye with Bush Eye with Bush & Sleeve Pin 60 x 9.5 Pin 60 x 9.5 Eye with Bush Pin 60 x 9.5 Eye with Bush Eye with Bush Eye with Bush Eye with Bush & Sleeve Eye with Bush & Sleeve Pin 60 x 9.5 Eye with Bush & Mounting Pin Eye with Bush & Sleeve Eye with Bush & Sleeve Pin 60 x 9.5 Eye with Bush Eye with Bush Eye with Bush Lower Mount Type (mm) Eye with Bush Eye with Bush & Sleeve Pin 60 x 9.5 Pin 60 x 9.5 Eye with Bush Eye with Bush Eye with Bush Eye with Bush Eye with Bush Eye with Bush & Sleeve Eye with Bush & Sleeve Eye with Bush & Sleeve Eye with Bush Eye with Bush Eye with Bush & Sleeve Pin 60 x 9.5 Eye with Bush & Sleeve Eye with Bush Eye with Bush & Sleeve Page 131 Open Closed Length Length (mm) (mm) 552 342 655 394 516 308 535 314 622 373 542 340 537 328 454 316 651 417 448 290 577 392 680 440 611 364 575 347 503 311 484 289 499 309 750 510 499 310 Mounting Kit No. 142995 No Kit 140276 140276 142387 140504 No Kit 142995 142995 No Kit No Kit 500555 140953 No Kit No Kit 140276 500498 142995 5004981 No. of Kits OME Bush Kit 1 1 1 1 1 OMEB14 1 1 1 1 1 1 1 1 OME NO.28 INT JULY 2012 RECOMMENDED FITTING TIMES COIL SPRINGS SYSTEMS All Coil Spring Models (Except Land Rovers) Fitment of 4 Shock Absorbers & 4 OME coil springs Land Rover All Coil Spring Models Fitment of all the above plus additional time to remove front shock absorber towers Torsion Bar Front with Rear Coil Suspension Fitment of 4 Shock Absorbers, 2 OME coil springs & front torsion bar adjustment Coil Front with Rear Leaf Suspension Fitment of 4 Shock Absorbers, 2 OME coil springs & 2 OME Leaf springs Coil Over Front Strut with Rear Coil Suspension Fitment of 2 Shock Absorbers, 2 OME struts & 4 OME coil springs Coil over Front Strut with Leaf Rear Springs Fitment of 2 Shock Absorbers, 2 Struts, 2 Coils & 2 Leaf Springs 2.0 hours 2.5 hours 2.0 hours 3.5 hours 3.0 hours 4.0 hours LEAF SPRING SYSTEMS All Leaf spring Models (Except HiLux) Fitment of 4 Shock Absorbers, 4 OME Leaf Springs, and U bolts and spring bushes as required Toyota HiLux All Leaf Spring Models Fitment of all the above plus additional work required to strengthen front spring seat mount Front Torsion Bar with Rear Leaf Spring Models Fitment of 4 Shock Absorbers, 2 OME rear leaf springs, U bolts, spring bushes and front torsion bar adjustment 5.0 hours 6.0 hours 3.0 hours CARTRIDGE REPLACEMENT Additional work required to install cartridge per strut 0.5 hours TORSION BARS Remove and replace a set of Bars (no removal complications) Remove and replace a set of Bars (removal complications eg. OE splines corroded) 1.5 hours 2.5 hours MISCELLANEOUS Caster kits Steering stabilisers Greasable shackles (complete vehicle set) 2.0 hours 0.5 hours 2.0 hours FRONT END WHEEL ALIGNMENT ADJUSTMENTS Price Live axle front end Independent Front End The above fitting times are only a guide, and additional time may be involved due to vehicle modifications or pre-existing accessories which can interfere with the fitment of the suspension. Page 132 OME NO.28 INT JULY 2012 OME Features NITROCHARGER SPORT SHOCK ABSORBERS LARGE BORE 35MM TWIN TUBE DESIGN - Allows greater oil volume for cooling and sustained valving performance and strong 1.6mm outer tube construction protects the vital internal components from damage. LARGE 18MM HARDENED CHROME PISTON ROD Strong enough to handle any load or harsh conditions expected from your 4x4. TRIPLE LIP CHECK VALVE OIL SEAL – MK2 -The latest technology in oil seal design – physically larger with quantum improvements in durability, oil and gas retention with much greater resistance to heat so it keeps working under the harshest conditions. TEFLON IMPREGNATED LOW FRICTION ROD GUIDE The latest refinement in rod guide design further reduces heat build up and maintains performance. TEFLON INFUSED BRONZE ROD GUIDE SLIP RING - A new component that maintains consistent and uniform performance by providing a tight and uniform fit between the piston rod and rod guide. MULTI DEFLECTIVE DISC VALVING SYSTEM - A unique and new valving system that features multiple disc valving control at the base of the shock and on both sides of the piston rod. This allows the OME engineers more valving options for better ride quality and handling control. 35MM HIGH FLOW TEFLON BANDED PISTON - New low friction design has less restrictive oil flow through the piston, reduces heat build up and aeration of the oil that leads to fade. VEHICLE SPECIFIC VALVING - OME shock absorber’s performance stand head and shoulders over its competitors because many hours of OME engineering valving work have been put into each and every shock absorber to ensure our customers get the best ride and handling their vehicle can have. POLYETHYLENE DIRT SHIELD – Impact resistant, polyethylene dirt shield provides additional protection from stone chips and off road debris. NITROGEN GAS – Increases the temperature operating range and improves oil flow through the valving, ensuring optimum performance. SUPPLEMENTARY WELDS - For strength and reliability, all mounts have supplementary welds. NITROCHARGER SHOCK ABSORBERS GIANT 18MM CHROMED SHAFT - Indestructible for Australia’s rugged off roading. Induction hardened then hard chromed to a superfine finish. NITROGEN GAS - The gas pressure keeps the oil cohesive under all situations. TWIN TUBE DESIGN - 33% thicker outer tube insures that rocks do not damage internal operating components. This design also allows for a greater volume of oil which keeps shock cooler. 35MM SEVEN STAGE COMPRESSION VALVE - Delivers all the subtleties of compression rates for the best ride and handling. CHECK VALVE SEAL - The latest in seal technology, this shaft seal significantly improves gas retention whilst offering excellent longevity. GLACIER BUSH - A Teflon coated rod guide bush significantly reduces heat build up in the rod guide area, developed from the Emu’s off road racing programme. GIANT 35MM TEFLON BANDED PISTON - A new four stage coil sprung rebound valve system to control vehicle bounce. SUPPLEMENTARY WELDS - On all mounting eyes & pins for maximum shock absorber mount strength. STONEGUARD - Protects oil seal and piston rod against stone and dirt damage. COIL SPRINGS X5K MICRO-ALLOYED SPRING STEEL – New generation high strength spring steel grade designed to withstand higher operating stresses with superior resistance to sag and improved toughness and corrosion fatigue properties. SHOT PEENED – To reduce stress, which greatly enhances spring life. DOUBLE SCRAGGED – To eliminate spring sag. VARIABLE AND CONSTANT RATE - Designs used to obtain optimum ride comfort and load carrying capabilities. STEERING STABILISERS COIL SPRUNG 9 STAGE VALVING - For optimum performance. 35MM PISTON & BORE - Greater oil volume giving better damper performance. TWIN TUBE DESIGN - Protects the internal components against stone damage. STEEL STONEGUARD - Protects the piston rod against stone damage. FOAM CELL - Keeps the oil at the valving to prevent fade. ORIGINAL MOUNTS - All mounts are of similar design to original stabilisers for ease of fitment. LEAF SPRINGS FLAT AXLE SEAT AREA - Lowers spring stress whilst retaining spring free camber height. Unique to most OME springs. ANTI FRICTION INTER LEAF LINERS - Used where applicable to reduce friction between spring leaves giving better ride comfort and increased spring life. SHOT PEENED - On the tension side of all leaves to double spring life. DRAW TAPERED & DIAMOND CUT LEAVES - For reduced interleaf friction and improved load distribution in the load bearing area. GRAPHITE COATED - For further reduced friction. MILITARY WRAPPED - For extra safety (where fitment permits). LOOSE CLAMPED - For smooth & quiet operation. URETHANE BUSHES - LEAF SPRING PREMIUM GRADE - Not all bushes are the same - OME bushes are precision moulded in captive moulds to ensure exact tolerances for long bush life. SPLINES - Ensures the best fit by taking up irregularities in spring eyes. UNIQUE OME DESIGN - Clever lip seal and shoulder design prevents dirt penetrating between bush shoulder and shackle face. GREASABLE SHACKLES REDUCED WEAR - Greasable shackles reduce shackle pin deterioration, increase bush life, enables easy maintenance and improve ride and handling. ANTI INVERSION FACILITY - Built in feature on all LandCruiser greasable shackles. SERVICING - Simple & effective. WARRANTY: For a copy of ARB’s Warranty Policy, ARB Products: Warranty Against Defects, please visit the ARB website – www.arb.com.au NOTES DISTRIBUTED BY Head Office: ARB Corporation Limited 42-44 Garden Street Kilsyth, Victoria 3137 AUSTRALIA Tel +61 3 9761 6622 Fax +61 3 9761 6807 Web: www.arb.com.au International enquiries exports@arb.com.au North, Central & South American Enquiry Centre: ARB 4x4 Accessories 720 SW 34th Street Renton, WA 98057 USA Tel: (425) 264 1391 Fax: (425) 264 1392 Web: www.arbusa.com Email: sales@arbusa.com
Similar documents
REAR - ARB
applicable to reduce friction between spring leaves giving better ride comfort and increased spring life. SHOT PEENED - On the tension side of all leaves to double spring life. DRAW TAPERED & DIAMO...
More informationOld Man Emu Application Guide
preventing axle bounce over rough roads. If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evident by axle bounce over rou...
More informationOME Cat 24 EXPORT Jun Update
Reduced Wear - Greasable shackles reduce shackle pin deterioration, increase bush life, enables easy maintenance and improve ride and handling. Anti Inversion Facility - Built in feature on all Lan...
More informationREAR - Xtreme4x4
and shackle face. GREASABLE SHACKLES REDUCED WEAR - Greasable shackles reduce shackle pin deterioration, increase bush life, enables easy maintenance and improve ride and handling. ANTI INVERSION F...
More informationOME Cat 24 EXPORT Nov09 Update
TEFLON IMPREGNATED LOW FRICTION ROD GUIDE The latest refinement in rod guide design further reduces heat build up and maintains performance. TEFLON INFUSED BRONZE ROD GUIDE SLIP RING - A new compon...
More information