low voltage fluorescent lighting products - Thin-Lite

Transcription

LOW VOLTAGE
FLUORESCENT LIGHTING PRODUCTS
Rev. 6
Front Cover Rev 6 July 2014
Get everything You Need in Fluorescent
Lighting from One Convenient Source!
Thin-Lite Corp. offers over 200 fixtures in 12VDC or
24VDC versions. As the only US based manufacturer
of low volt fluorescent lighting we provide technical,
engineering, and design assistance to satisfy your
lighting requirements. Custom features are available.
Send specifications to thinlitesales@thinlite.com for
quotation.
Table of Contents
109-110 Circuline Surface Mount
1
Single Tube Surface Mount
2
Original Dual Tube Surface Mount
3
600 Series Elegant Surface Mount
4
620 Series Compact Surface Mount
5
Shipping — FEDEX, UPS, LTL, TL, Container
700 Commercial Grade Recessed
6
Stock items ship within 72 hours. Allow two-week lead
time for special order items.
700 Euro-Style Recessed
7
Payment — Four Payment Methods
170 Series Low Profile
8
190 High Efficiency Series
9
Ordering
—
Five Fast Ways to Order
1) Phone
2) Fax
3) EDI
4) Mail
5) ThinliteSales@Thinlite.com
1) Check
2) VISA or MASTERCARD or DISCOVER
3) C.O.D.
4)
Wire transfer
Warranty — 2 Year Renewable
1) Limited lifetime warranty for original purchaser.
2)
Fixture is repaired or replaced at no charge.
Details on page 23.
180 Industrial & Commercial
10
160 Series Weatherproof Outdoor
11
900 Series Compact Surface Mount
12
Commercial Truck Series
13
Specialty & Emergency Vehicle 14 - 16
Electronic Inverter Ballasts
17
ST 100 Series Valance Lights
18
ST 130 Series Surface Mount
19
Incandescent Series
20
Halogen & Replacement Lamps
21
Installation & Warranty
22 - 24
Table of Contents Rev 4 July 2013
We have received praise from owners,
manufacturers and dealers both for the quality
of our products and our after-sales service.
Over the years the engineers at Thin-Lite
Corporation have striven for continual
Improvement. They have continued to test and
refine the latest technology to meet
tomorrow’s lighting needs.
Dave Szymanek, (May 1, 1943 - Dec. 31, 2010), President
of Thin-Lite Corporation, at the time, proudly accepts the “E”
Award for Excellence in Exports from President Ronald
Reagan in the Rose Garden of the White House in 1984.
Thin-Lite Corporation pioneered fluorescent
lights for the RV market in 1969. Sure, there
were other fluorescents on the market in
1969, but nobody could match the durability
and brightness of Thin-Lite Products.
Today we are the leaders in the development
and manufacture of 12 volt DC lighting for
industry, trucking and recreational vehicles.
Our all-aluminum housings are corrosion and
rust resistant.
We are proud to say that no other line of
fluorescents lighting match our record. We
were the first in the industry to secure U.L.
listing of 12 volt DC fluorescent for marine
and R.V. Look for the familiar U.L and CE
symbols on our packages.
When you have over ten million Thin-Lites in
use, you are sure to hear from your customers.
In 1981, Thin-Lite Corporation introduced low
Voltage Low Pressure Sodium lights for use in
conjunction with photovoltaic, where grid
power is unavailable. Typical applications
include warehouse, security and street lighting
in remote areas. In 1999 Thin-Lite Corporation
introduced the 650 and 760 series Elegant light
fixtures. In 2002, 620 series, 500 series and
VFI 15, 199PL models we added in our
production line.
Thin-Lites are recognized and in demand
worldwide. Whether in the Sahara, the middle
of the jungle, or atop remote peaks in the Alps,
Thin-Lites have been found dependable and
efficient. In appreciation of this outstanding
representation of American know-how,
President Ronald Reagan awarded the
Presidential “E” Award for Excellence in
Exports to Thin-Lite Corporation in 1984.
At Thin-Lite we will continue our efforts to
produce the finest quality and most efficient
lighting for a variety of lighting needs
worldwide.
This includes fixtures using standard
fluorescent tubes as well as the full color
spectrum fluorescent tubes now available
everywhere. We can design and build to
customer requirements. We look forward to
serving you.
Co. History Rev 3 Aug. 2012
THE ORIGINAL FLUORESCENT
CIRCULINE LIGHT FIXTURES
The Circuline series offer years of reliable, virtually maintenance free service while delivering maximum light output
at minimal amp draw. Designs are complemented by opaque white or prismatic diffuser lenses, white powder coated
aluminum housings, and attractive wood grain trim. Lamp and push button switch included with all fixtures. Model
109C, Model 109CXL and Model 110 have round housings. Model 109S is supplied with square housing. Model 110
is available with decorative opaque white lens to maximize light output for larger areas up to 100 square feet.
MODEL NO.
WATTS
LAMP
VOLTAGE
AMPS
LUMENS
109C
109CXL
22
22
22
ONE FC8T9/CW
ONE FC8T9/CW
ONE FC8T9/CW
12 VDC
12 VDC
109CAXL
12 VDC
110
22
32
ONE FC8T9/CW
ONE FC12T9/CW
12 VDC
12 VDC
1.6
1.6
1.6
1.6
2.2
1000
1000
1000
1000
1825
LENS
OPAQUE WHITE
CLEAR
AMBER
DIMENSIONS
mm
9.5” DIA X 1.75”
241.3 DIA X 44.5
9.5” DIA X 1.75”
241.3 DIA X 44.5
9.5” DIA X 1.75”
241.3 DIA X 44.5
WEIGHT
kg
109S
0.85 lb.
0.386 kg
1.17 lb.
0.531 kg
1.17 lb.
0.531 kg
OPAQUE WHITE
9.5” SQU X 1.75”
241.3 SQU X 44.5
OPAQUE WHITE
13.25” DIA X 2.375”
336.6 DIA X 60.3
2.08 lb.
0.944 kg
1.12 lb.
0.508 kg
All Thin-Lite Corporation products comply with and exceed most industry standards. However, due to continued
manufacturing improvements, UL listings for individual Thin-Lite and S.T Lighting fixtures will vary. Please consult
factory for current information. Other voltages, high humidity and RFI suppressant are available. Consult factory. Lumen
ratings according to lamp manufacturers’ 60Hz data for CW lamp. Specifications subject to change without notice.
THIN-LITE CORPORATION
530 CONSTITUTION AVE
CAMARILLO, CA 93012
PHONE: (805) 987-5021
FAX: (805) 388-0921
Original Circle Rev 4 July 2013
Visit us @ www.thinlite.com
E-MAIL: thinlitesales@thinlite.com
1
THE ORIGINAL FLUORESCENT SINGLE
TUBE SURFACE MOUNT LIGHT FIXTURES
Thin-Lite surface mount fixtures designed for high light output at low amp draw. They offer years of reliable, virtually
maintenance free service. Energy efficient, they are complemented by non-yellowing diffuser lens, white pre-painted
finish, and attractive wood-grain trim. Standard fixtures have aluminum housing. They include standard fluorescent
tubes powered by Thin-Lites’ highly efficient DC electronic ballasts. Model 115 supplied without wood grain trim lens.
MODEL NO.
WATTS
LAMP
111
115
125
8
15
13
ONE F8T5/CW
VOLTAGE
ONE F15T8/CW
ONE F13T5/CW
12 VDC
12 VDC
12 VDC
AMPS
0.8
1.3
1.1
LUMENS
400
825
850
SWITCH
ROCKER
ROCKER
ROCKER
DIMENSIONS
mm
WEIGHT
kg
12.25” X 4.125” X 1”
311.2 X 104.8 X 25.4
18” X 4” X 1.375”
457.2 X 101.6 X 34.9
21.312” X 4.125” X 1”
541.3 X 104.8 X 25.4
0.72 lb.
0.327 kg
1.04 lb.
0.472 kg
1.12 lb.
0.508 kg
factory for current information. Other voltages, high humidity and RFI suppressant are available. Consult factory. Lumen
ratings according to lamp manufacturers’ 60Hz data for CW lamp. Specifications subject to change without notice.
Original Single Rev 4 July. 2013
CAMARILLO, CA 93012
2
PHONE: (805) 987-5021
FAX: (805) 388-0921
THE ORIGINAL FLUORESCENT DUAL
TUBE LIGHT SURFACE MOUNT FIXTURES
Thin-Lite surface mount fixtures are designed for high light output with low amp draw. They offer years of reliable, virtually
maintenance free service. Non-yellowing diffuser lens with or without wood grained trim and white powder coated
aluminum housings are standard. Fixtures use standard fluorescent tubes, available worldwide, and Thin-Lites’ highly
efficient DC electronic ballasts. Model 180 has a three way rocker switch for choice of red light or white light. Model 190
has two separate rocker switches and two DC ballasts to operate red lamp, white lamp, or red and white simultaneously.
MODEL NO.
112
116
126
180
190
WATTS
16
30
26
8 / 16
15 / 30
LAMP(S)
TWO F8T5/CW
TWO F15T8/CW
VOLTAGE
12 VDC
TWO F13T5/CW
TWO F8T5/CW
TWO F15T8/CW
12 VDC
12 VDC
12 VDC
12 VDC
AMPS
1.4
2.2
2.0
0.8 / 1.4
1.3 / 2.2
LUMENS
800
1650
1700
400 / 800
825 / 1650
SWITCH
ROCKER
ROCKER
ROCKER
3 POSITION
2 SWITCHES
12.25”X5.5”X1”
311.2X139.7X25.4
18”X5.625”X1.375”
457.2X142.9X34.9
DIMENSIONS
mm
WEIGHT
kg
12.25”X5.5”X1”
311.2X139.7X25.4
18”X5.625”X1.375”
457.2X142.9X34.9
21.312”X5.5”X1”
541.3X139.7X25.4
1.46 lb.
0.663 kg
1.36 lb.
0.617 kg
0.92 lb.
0.418 kg
1.80 lb.
0.817 kg
0.94 lb.
0.427 kg
manufacturing improvements, UL listings for individual Thin-Lite and S.T Lighting fixtures will vary. Please
consult factory for current information. Other voltages, high humidity and RFI suppressant are available. Consult
factory. Lumen ratings according to lamp manufacturers’ 60Hz data for CW lamp. Specifications subject to
change without notice.
Original Dual Rev 4 July. 2013
CAMARILLO, CA 93012
PHONE: (805) 987-5021
FAX: (805) 388-0921
3
600 SERIES ELEGANT SURFACE MOUNT
FLUORESCENT LIGHT FIXTURES
These surface mount light fixtures provide efficient lighting for elegant interiors. Designed especially for O.E.Ms,
they are easy to install in ceilings and under cabinets. They provide the “custom made” look in either the anodized
aluminum housing or molded frame. Clear acrylic diffuser lens add the finishing touch.
MODEL 616
30 watt 12VDC light. 2.2 amps.
Overall dimensions: 20.625” x 5.53” x 1.57”
(523.9 mm x 140.5 mm x 39.9 mm).
Includes two F15T8CW fluorescent tubes.
1650 design lumens. White end cap.
Rocker switch. 2.26 lb. (1.025 kg).
Model 690 has two ballasts & two switches.
#616
MODEL 612
(379.4 mm x 140.5 mm x 39.9 mm).
800 design lumens. White end cap.
#612
MODEL 656
(575.4 mm x 185.4 mm x 39.6 mm).
1650 design lumens. White diamond polish.
#656
MODEL 652
(427.8 mm x 185.4 mm x 39.6 mm).
800 design lumens. White diamond polish.
#652
manufacturing improvements, UL listings for individual Thin-Lite and S.T. Lighting fixtures will vary. Please
600series Rev 4 July 2013
CAMARILLO, CA 93012
4
PHONE: (805) 987-5021
FAX: (805) 388-0921
620 SERIES ELEGANT COMPACT SURACE
MOUNT FLUORESCENT LIGHT FIXTURES
Low profile 620 Series are 1.5” deep, light weight, with contoured design for mounting on curved or flat surfaces.
Semi-clear diffuser lens and white powder coated aluminum housings provide maximum reflectivity. BX models are
supplied with CFL (compact fluorescent lamps). **Actual lumens may vary. Please use for comparison only.
MODEL NO.
622
WATTS
16
LAMP(S)
TWO F8T5/CW
VOLTAGE
622BX
626
18
ONE 18watt CFL
30
TWO F15T8/CW
626BX
626WW
36
30
ONE 36 watt CFL
TWO F15T8/WW
12 VDC
12 VDC
12 VDC
12 VDC
12 VDC
AMPS
1.4
1.5
2.2
2.3
2.2
LUMENS**
1200
1500
1925
3000
1925
ROCKER
ROCKER
ROCKER
SWITCH
DIMENSIONS
mm
WEIGHT
kg
ROCKER
14”X5.6”X1.5”
354 X 141 X 38
ROCKER
14”X5.6”X1.5”
354 X 141 X 38
1.32 lb.
0.598 kg
19.7”X5.6”X1.5”
499 X 141 X 38
1.32 lb.
0.598 kg
1.84 lb.
0.834 kg
19.7”X5.6”X1.5”
499 X 141 X 38
19.7”X5.6”X1.5”
499 X 141 X 38
1.84 lb.
0.834 kg
1.84 lb.
0.834 kg
CAMARILLO, CA 93012
PHONE: (805) 987-5021
FAX: (805) 388-0921
5
700 SERIES RECESSED COMMERCIAL
GRADE FLUORESCENT LIGHT FIXTURES
These Commercial Grade Recessed light fixtures provide efficient lighting for elegant interiors. Designed to O.E.M
specifications, they are easy to install in ceilings and under cabinets. They provide the “custom made” look in either the
anodized or powder coated aluminum housings. Injection molded or extruded acrylic diffuser lenses add the finishing
touch. Model 718XL is available with dual 32 watt tubes. Consult factory.
MODEL 716XL
30 watt 12VDC light. Suggested mounting
opening: 20.125” x 5.313” x 1.25”. Overall
dimensions: 20.625” x 6.625” x 2.00”. 2.2 amps.
Includes two F15T8CW fluorescent tubes. 1650
design lumens. Rocker switch. 2.80 lb.
Extruded housing.
#716XL
MODEL 712XL
Uses two F8T5CW fluorescent tubes. 800 design
lumens. Rocker switch. 1.98 lb.
Extruded housing.
#712XL
MODEL 746 (FOR SHALLOW CEILINGS)
Uses two F15T8CW fluorescent tubes. 1650
design lumens. Rocker switch. 1.58 lb.
Sheet metal housing.
#746
Uses two F8T5CW fluorescent tubes. 800 design
lumens. Rocker switch. 1.26 lb.
Sheet metal housing.
#742
CAMARILLO, CA 93012
6
PHONE : (805) 987-5021
FAX: (805) 388-0921
700 SERIES EURO-STYLE RECESSED
These Euro-Style Recessed light fixtures provide efficient lighting for elegant interiors. Designed especially for O.E.Ms,
they are easy to install in ceilings and under cabinets. They provide the “custom made” look in either the anodized
aluminum housing or molded frame. Injection molded frame or extruded acrylic diffuser lens add the finishing touch.
Model 736XL, offered with clear prismatic lens, delivers 15% more light. See photo of lens page 6, part number 716XL,
of this catalog.
1650 design lumens. Rocker switch. 2.35 lb.
#736
#732
opening: 18.125” x 4.75” x .937”. Overall
#766
opening: 12.25” x 4.75” x .937”. Overall
#762
consult factory for current information. Other voltages, high humidity, and Dual RFI suppressant models are
available. Actual lumen ratings vary based on interior design of your vehicle. Specifications subject to change
without notice.
700-1series Rev 4 July 2013
CAMARILLO, CA 93012
PHONE : (805) 987-5021
FAX: (805) 388-0921
7
FLUORESCENT LIGHTING FIXTURES
170 SERIES LOW PROFILE
Low profile Thin-Lites are designed for use in areas that require light but have limited mounting space. Only
2.25” wide and 1.25” deep, they provide lighting in low profile area and aisle lighting. They fit nicely under
cabinets and around mirrors. They feature anodized aluminum housings and clear acrylic diffuser lens.
MODEL NO.
WATTS
LAMP(S)
VOLTAGE
171
172
173
174
179
8
16
13
26
6
ONE F8T5/CW
TWO F8T5/CW
ONE F13T5/CW
TWO F13T5/CW
ONE F6T5/CW
12 VDC
12 VDC
12 VDC
12 VDC
12 VDC
AMPS
0.8
1.4
1.1
2.0
0.5
LUMENS
400
800
850
1700
295
SWITCH
DIMENSIONS
mm
WEIGHT
kg
PUSH BUTTON
NO SWITCH
PUSH BUTTON
NO SWITCH
PUSH BUTTON
17.68”X2.25”X1.25” 29.75”X2.25”X1.25” 26.68”X2.25”X1.25” 47.75”X2.25”X1.25” 15.37”X2.25”X1.25”
449.1X57.2X31.8
755.7X57.2X31.8
677.7X57.5X31.8
1212.3X57.2X31.8 390.4X57.5X31.8
0.78 lb.
0.354 kg
1.23 lb.
0.558 kg
1.10 lb.
0.499 kg
1.88 lb.
0.853 kg
0.68 lb.
0.309 kg
manufacturing improvements, UL listings for individual Thin-Lite and S.T. Lighting fixtures will vary. Please consult
factory for current information. Other voltages, high humidity, and Dual RFI suppressant models are available. Actual
lumen ratings vary based on interior design of your vehicle. Specifications subject to change without notice.
CAMARILLO, CA 93012
8
PHONE : (805) 987-5021
FAX: (805) 388-0921
FLUORESCENT LIGHTING FIXTURES
190 SERIES HI-EFFICIENCY STYLES
The 190 series offers highly efficient and compact designs rated from 6 to 30 watts. Anodized aluminum housings and
clear acrylic diffuser lenses deliver light in a 180 degree arc to maximize light output. Applications include commercial
and industrial vehicles, portable housing, schools, offices, and medical facilities powered by batteries and/or alternative
energy. The fixtures are available with almond or black end caps, with a clear diffuser lens.
MODEL NO.
WATTS
LAMP
191 / 291
193 / 293
195 / 295
197 / 297
8
15
17
30
32
ONE F8T5/CW
ONE F15T8/CW
ONE F30T8/CW
ONE 32T8SPX41
VOLTAGE
12 / 24VDC
12 / 24VDC
AMPS
0.8 / 0.4
1.3 / 0.7
LUMENS
400
SWITCH
ROCKER
ROCKER
12.5”x2.60”x2.5”
317.5x66.1x63.5
18.25”x2.60”x2.5”
463.6x66.1x63.5
0.83 lb.
0.377 kg
1.18 lb.
0.535 kg
DIMENSIONS
mm
WEIGHT
kg
825
ONE F17T8/CW
12 / 24VDC
P1954 / P2954
12 / 24VDC
12 / 24VDC
1.4 / 0.7
2.1 / 1
2.3 / 1.2
1250
2175
2950
ROCKER
ROCKER
NO SWITCH
24.25”x2.60”x2.5” 36.25”x2.60”x2.5”
616.0x66.1x63.5
920.8x66.1x63.5
1.50 lb.
0.681 kg
48.25”x2.60”x2.5”
1226x66.1x63.5
2.10 lb.
0.953 kg
3.2 lb.
1.45 kg
factory for current information. Other voltages, high humidity, and Dual RFI suppressed models are available. Lumen
ratings vary according to vehicle interior designs. Specifications subject to change without notice.
CAMARILLO, CA 93012
PHONE : (805) 987-5021
FAX: (805) 388-0921
9
150 & 180 SERIES INDUSTRIAL & COMMERCIAL
These surface mount series can be used commercial, industrial, and even residential. They are designed for practical
applications where decorative styling and durability are desirable. They feature satin finished anodized aluminum housings
and clear diffuser lenses for maximum light output. All are designed for remote switching. Models 151 and 153 are supplied
with low profile end caps, no lens. These fixtures utilize standard 17 watt (24”) or 32 watt (48”) fluorescent tubes readily
available world-wide. **Lamp not included as noted below.
MODEL NO.
153
151
183
181
WATTS
32
17
32
17
LAMP
VOLTAGE
ONE F32T8/CW**
ONE F17T8/CW**
ONE F32T8/CW**
ONE F17T8/CW
12 VDC
12 VDC
12 VDC
12 VDC
AMPS
2.3
1.2
2.3
1.2
LUMENS
2850
1250
2850
1250
SWITCH
NO SWITCH or LENS
NO SWITCH or LENS
NO SWITCH
NO SWITCH
DIMENSIONS
mm
48.125”X3.375”X1.63”
1222.4 X 85.7 X 41.4
24.125”X3.375”X1.63”
612.8 X 85.7 X 41.4
48.125”X3.625”X3.5”
1222.4 X 92.1 X 88.9
24.125”X3.625”X3.5”
612.8 X 92.1 X 88.9
2.89 lb.
1.311 kg
1.55 lb.
0.703 kg
WEIGHT
kg
3.69 lb.
1.674 kg
2.29 lb.
1.039 kg
manufacturing improvements, UL listings for individual Thin-Lite and S.T Lighting fixtures will vary. Please consult factory
for current information. Other voltages, high humidity, and Dual RFI suppressant models are available. Lumen ratings vary
based on vehicle interior design and lamp specifications. All specifications subject to change without notice.
CAMARILLO, CA 93012
10
PHONE : (805) 987-5021
FAX: (805) 388-0921
WEATHERPROOF FLUORESCENT
160 SERIES OUTDOOR AREA LIGHTS
Thin-Lite 160 series weatherproof outdoor area lights that feature anodized aluminum housings and aerodynamic design for
side & rear mounting. They provide superior security and area lighting for alternative energy sites, entry doors, and toy hauler
ramps they ensure clear visibility for parking, hitching or backing up. All models are supplied with either amber diffusers lens
to minimize insect activity or clear lens for maximum light output. Specify type of lens required when ordering.
MODEL NO.
161
162
163
167
WATTS
8
16
15
30
LAMP(S)
ONE F8T5/CW
TWO F8T5/CW
ONE F15T8/CW
ONE F30T8/CW
12 VDC
12 VDC
12 VDC
12 VDC
AMPS
0.8
1.4
1.3
2.1
LUMENS
400
800
825
2180
SWITCH
PUSH BUTTON
PUSH BUTTON
PUSH BUTTON
PUSH BUTTON
12.875”X3.80”X2.75”
327.1 X 96.5 X 69.9
12.875”X3.80”X2.75”
327.1 X 96.5 X 69.9
18.5”X3.80”X2.75”
469.9 X 96.5 X 69.9
36.5”X3.80”X2.75
1.45 lb.
0.658 kg
1.54 lb.
0.699 kg
VOLTAGE
DIMENSIONS
mm
WEIGHT
kg
2.04 lb.
0.926 kg
”
927.1 X 96.5 X 69.9
3.84 lb.
1.742 kg
consult factory for current information. Other voltages, high humidity, and dual RFI suppressed models are
available. Lumen ratings vary based on application and lamp specifications. Specifications subject to change
without notice.
CAMARILLO, CA 93012
PHONE : (805) 987-5021
FAX: (805) 388-0921
11
COMPACT STYLES 900 SERIES SURFACE MOUNT
WITH DUAL RFI SUPPRESSION
Our 900 series fixtures were developed for efficient, attractive, and noise free operation where maximum light is required.
Anodized aluminum housings, clear acrylic diffuser, and full spectrum compact lamps provide true color rendering.
Their low profile makes them ideal for commercial and industrial vehicles, remote area housing, schools, mobile medical
offices, and storage cabinets where alternative energy and solar power are available. Supplied with or without rocker
switch, and compact fluorescent lamps that have minimum color rendering index (CRI) of 82.
MODEL #
WATTS
AMPS
DIMENSIONS
DESIGN LUMENS
WEIGHT
941
5
0.40
6.875” X 4.5” X 1.5”
250
0.76 lb.
943
7
0.58
6.875” X 4.5” X 1.5”
400
0.76 lb.
945
9
0.75
8.875” X 4.5” X 1.5”
600
0.94 lb.
947
11
0.90
12.875” X 4.5” X 1.5”
900
1.29 lb.
949
13
1.10
8.875” X 4.5” X 1.5”
900
0.94 lb.
951
18
1.50
12.875” X 4.5” X 1.5”
1250
1.29 lb.
953
24/27
2.00
14.875” X 4.5” X 1.5”
1800
1.65 lb.
957
36/39
2.30
18.875” X 4.5” X 1.5”
2850
1.85 lb.
All Thin-Lite Corporation products comply with and exceed most industry standards. However, due to
continued manufacturing improvements, UL listings for individual Thin-Lite and S.T Lighting fixtures will
vary. Please consult factory for current information. Other voltages and high humidity are available. Consult
factory. Lumen ratings vary based on application. Specifications subject to change without notice.
CAMARILLO, CA 93012
12
PHONE : (805) 987-5021
FAX: (805) 388-0921
COMMERCIAL TRUCKS SERIES
These heavy duty light fixtures provide efficient lighting for commercial trucks. Black and silver anodized aluminum
housings complement interior color schemes. Injection molded or extruded acrylic diffuser lenses and frames add the
finishing touch and “custom made” look. Plug-in connectors match OEM commercial truck wire harnesses. Model 194
and Model 192 are available with almond end caps or black end caps. Consult factory for specific applications.
MODEL P716K (RECESSED)
Includes two F15T8CW fluorescent tubes. 1650
design lumens. Noise free RFI ballast
Black housing.
#P716K
MODEL 723F (RECESSED)
dimensions: 20.125” x 4.3125” x 1.875”. 1.3
amps. Includes one F15T8CW fluorescent tube.
825 design lumens. Frame with diffuser lens.
#723F
MODEL P194NH
Overall dimensions: 18.25” x 5.625” x 1.625”.
1650 design lumens. Three way rocker switch.
Noise free RFI suppressant ballast.
OEM Truck wire-harness stock
#P194NH
MODEL 115BKF
Overall dimensions: 18” x 4” x 1.419”.
Includes one F15T8CW fluorescent tube.
825 design lumens. Black housing. No switch.
Available with rocker switch.
OEM Truck Wire-harness stock
#115BKF
spseries Rev 4 July 2013
CAMARILLO, CA 93012
PHONE: (805) 987-5021
FAX: (805) 388-0921
13
SPECIALTY & EMERGENCY SERIES
Standard models are shown below. Many variations are available with features including 12-28 VDC rated input, high
humidity ballasts, specialty lamps, custom wire termination, switching options, and housing finishes. Send
specifications, attention: Thin-Lite Engineering Dept., for consultation and quotation.
#1952L
#184
MODEL 184
24/27 watt 12VDC light. 2.0 amps
Includes one 24 w Dulux L or 27 w Biax Lamp.
Anodized aluminum housing & clear acrylic lens
1800 design lumens. No switch. Almond End caps
MODEL 1952L
Includes one F17T8/CW fluorescent tube.
1325 design lumens. No switch. Black End caps.
MODEL 186
36/39 watt 12VDC light. 2.3 amps.
Includes one 36 w Dulux L or 39 w Biax Lamp.
2850 design lumens. No switch. Almond End caps
MODEL 1954L
2850 design lumens. No switch. Black End caps.
MODEL 108
22 watt 12VDC light.
Circuline Adaptor for table or swag lamps.
1.6 amps.
Includes one FC8T9/CW fluorescent tube.
1100 design lumens.
#108
Sp1series Rev 4 July 2013
CAMARILLO, CA 93012
PHONE: (805) 987-5021
14
FAX: (805) 388-0921
SPECIALTY LOW PRESSURE SODIUM LIGHTS
Thin– Lite’s NBX lights are applicable for high lumen applications, and VFI lights are applicable for refrigerated trucks
and car carriers.
MODEL P716NBX
39 watt 12 or 24 VDC input. Suggested mounting
opening: 20.125” x 5.3125” x 1.25”.
2.3 amps. Includes one 39 watt Biax lamp. 2850 design
lumens. Anodized aluminum housing. Injection molded
acrylic diffuser lens.
No switch
MODEL P718NBX
78 watt 12 or 24 VDC input. Suggested mounting
opening: 38.609” x 5.3125” x 1.25”.
Overall dimensions: 39.00” x 6.625” x 2.00”. 4.6 amps.
Includes two 39 watt Biax lamps. 5700 design lumens.
Anodized aluminum housing. Injection molded acrylic
diffuser lens. No switch
MODEL VFI-30PT (Weather resistant)
30 watt 12 or (24) VDC input. 2.1 or (1 amp),
1.5” OD x 44.25” L. Includes one
F30T8/CW lamp rated at 2175 design
lumens. Supplied with 12” 18-2 lead &
SJT 2/C ring terminals. Flexible, snap
lock, mounting brackets available. Order
P/N VFI-BKT-Pair. Models supplied with
18”, 24” and 48” lamps also available.
All Thin-Lite Corporation products comply with and exceed most industry standards. However, due to continued manufacturing
improvements, UL listings for individual Thin-Lite and S.T. Lighting fixtures will vary. Please consult factory for current information.
Other voltages, high humidity and RFI suppressant are available. Consult factory. Lumen ratings according to lamp manufacturers’ 60Hz
data for CW lamp. Specifications subject to change without notice.
CAMARILLO, CA 93012
PHONE: (805) 987-5021
FAX: (805) 388-0921
15
SPECIALTY
Model 800 mounts anywhere, is light weight, and 5 times more efficient than conventional incandescent & halogen
dome lights. DIST-VFI-15 features replaceable lamp, can be submersed in water to attract bait, self-retracting cord that
extends to 10 FT, cigarette lighter adapter & mounting brackets. Specify model OEM-553 for recessed applications.
DIST-553 is designed for surface plug in applications, mounting collar included. All models are available in 12 VDC
or 24VDC versions. Send specifications to receive quotation for additional features.
MODEL 800 (Dome Light)
Dual CF 7 watt 12VDC light. 1.2 amps
Overall dimensions: 7.5 “x 7.5” x 1.855”.
Includes two CF7DS/E fluorescent Lamp.
Powder coated aluminum housing & opaque
acrylic diffuser lens. Rocker switch. Injection
molded frame.
MODEL 553 (Wet Location)
PL 24/27 watt lamp draws 2 amps at 12 VDC or
1 amp at 24 VDC input. Overall dim: 19.72” X
6.82” X 2.02”, opening dim.15.5” x 4” x 1.6”.
Lamp rated at 1800 design lumens. Sealed
anodized aluminum housing & clear acrylic lens.
Injection mold end cap.
MODEL 199PL
PL 13 watt 12VDC light. 1.1 amps.
Overall dimensions: 9.5” X 2.6” X 2.5”.
Includes one 13 w PL Lamp. Anodized aluminum
housing & clear acrylic lens. 900 design lumens.
Rocker Switch. Almond End caps
MODEL VFI-15 (Wet Location)
Overall dimensions: 1.5” Dia. x 26 Long”
Clear polycarbonate tube. Vinyl end caps.
Mounting bracket and Cigarette plug in adapter
Included.
sp4series Rev 4 July 2013
CAMARILLO, CA 93012
PHONE: (805) 987-5021
16
FAX: (805) 388-0921
RFI SUPPRESSANT
ELECTRONIC INVERTER BALLASTS
Thin-Lite electronic quiet ballasts operate at 30,000 cycles for maximum efficiency. Dual or single stage RFI
circuitry is offered to ensure quite, noise free, operation. We manufacture ballasts to power fluorescent, low
pressure sodium, and germicidal lamps rated from 6 to 32 watts. Consult factory for specifications to meet your
requirements. Dual stage ballasts, designated by “P” prefix, are listed below. When specifying single stage RFI
models omit the “P” prefix.
OPEN
MODEL #
WATTS
OIB-P109
22
OIB-P111
8
OIB-P112
LAMP
ENCLOSED
MODEL #
WATTS
OIBC-P109
22
ONE F8T5/CW
OIBC-P111
8
ONE F8T5/CW
16
TWO F8T5/CW
OIBC-P112
16
TWO F8T5/CW
OIB-P115
15
ONE F15T8/CW
OIBC-P115
15
ONE F15T8/CW
OIB-P116
30
TWO F15T/CW
OIBC-P116
30
TWO F15T8/CW
OIB-P125
13
ONE F13T5/CW
OIBC-P125
13
ONE F13T5/CW
OIB-P126
26
OIBC-P126
26
TWO F13T5/CW
OIB-P138
34
TWO F17T8/CW
OIBC-P138
34
TWO F17T8/CW
OIB-P151
17
ONE F17T8/CW
OIBC-P151
17
ONE F17T8/CW
OIB-P153
32
ONE F32T8/CW
OIBC-P153
32
ONE F32T8/CW
OIB-P199
6
ONE F6T5/CW
OIBC-P199
6
OIB-P147
30
ONE F30T8/CW
OIBC-P147
30
ONE FC8T9/CW
TWO F13T5/CW
LAMP
ONE FC8T9/CW
ONE F6T5/CW
ONE F30T8/CW
consult factory for current information. Other voltages, high humidity, and dual RFI suppressant models are
available. Lumen ratings will vary based on surface textures and reflectivity of interior colors. Specifications
subject to change without notice.
CAMARILLO, CA 93012
PHONE: (805) 987-5021
FAX: (805) 388-0921
17
ST 100 SERIES INDIRECT VALANCE SERIES
FLUORESCENT STRIP LIGHTS
The ST 100 series strip lights provide soft even light to accent headliners, valances, ceilings, closets, under cabinet and
shelving areas where lenses are not required. The lightweight aluminum housing and narrow profile allow for unlimited
applications to accent your interior designs. Fixtures are shipped complete with fluorescent tubes. Supplied without switch or
lens.
MODEL NO.
101
103
105
107
8
15
17
30
ONE F8T5/CW
ONE F15T8/CW
ONE F17T8/CW
ONE F30T8/CW
12 VDC
12 VDC
12 VDC
12 VDC
AMPS
0.8
1.3
1.2
2.1
LUMENS
400
825
1250
2175
17.75”X 2.15”X1.25”
450.9 X 54.6 X 31.8
23.437”X2.15”X1.625”
595.3 X 54.6 X 41.3
29.437”X2.15”X1.625”
747.7 X 54.6 X 41.3
WATTS
LAMP
VOLTAGE
DIMENSIONS
mm
WEIGHT
kg
0.46 lb.
0.209 kg
0.70 lb.
0.318 kg
41.437”X2.15”X1.625”
1052.5 X 54.6 X 41.3
0.80 lb.
0.363 kg
1.05 lb.
0.477 kg
available. Lumen ratings will vary based on surface textures and reflectivity of interior colors. Specifications
CAMARILLO, CA 93012
18
PHONE: (805) 987-5021
FAX: (805) 388-0921
ST 130 SERIES SURFACE-MOUNT
The ST 130 series features powder coated aluminum housings and acrylic diffuser lens. They deliver even, non-glare, lighting
to ensure a stress free work environment. No hot-spots or eye strain. Decorative Cracked Ice lenses and gold housings are
supplied on Model 130CI and Model 134CI. Plain lens and gold finish is standard on model 138. Specify model 130W, 134W
and 138W to receive white finished housing.
MODEL NO.
130
134
138
139
139-2
WATTS
16
30
34
32
64
LAMP(S)
TWO F8T5/CW
TWO F15T8/CW
TWO F17T8/CW
12 VDC
12 VDC
12 VDC
12 VDC
12 VDC
AMPS
1.4
2.2
2.4
2.3
4.6
LUMENS
800
1650
2500
2850
5700
SWITCH
ROCKER
ROCKER
ROCKER
ROCKER
ROCKER
12”X 5.375”X1.75”
304.8X136.6X44.5
18”X5.375”X1.75”
457.2X136.6X44.5
24”X5.375”X1.75”
609.6X136.6X44.5
48”X5.375”X1.75”
1219.2X136.6X44.5
48”X5.375”X1.75”
1219.2X136.6X44.5
1.15 lb.
0.522 kg
1.62 lb.
0.735 kg
2.28 lb.
1.034 kg
2.76 lb.
1.252 kg
3.55 lb.
1.611 kg
VOLTAGE
DIMENSIONS
mm
WEIGHT
kg
ONE F32T8/CW
TWO F32T8/CW
available. Actual lumen ratings vary based on reflective values and textures of structure interior. Specifications
CAMARILLO, CA 93012
PHONE: (805) 987-5021
FAX: (805) 388-0921
19
INCANDESCENT
LIGHT FIXTURES
MODEL 160I18A (PORCH LIGHT)
VOLT: 12VDC
AMPS: 1.4 AMPS, WEIGHT: 0.64 LB
HOUSING: EXTRUDED ALUMINUM
FINISH: CLEAR SATIN ANODIZED
END CAP: BLACK INJECTION MOLDED
LENS: ACRYLIC AMBER
LAMP: #921 WEDGE BASE
DIMENSIONS: 6.5” X 3.875” X 2.75”
MODEL 160I18C (PORCH LIGHT)
VOLT: 12VDC
HOUSING: EXTRUDED ALUMINUM
FINISH: CLEAR SATIN ANODIZED
END CAP: BLACK INJECTION MOLDED
LENS: CLEAR ACRYLIC
LAMP: #921 WEDGE BASE
DIMENSIONS: 6.5” X 3.875” X 2.75”
MODEL 311-1
VOLT: 12VDC
HOUSING: ABS WHITE PLASTIC
LENS: CLEAR POLYCARBONATE
LAMP: ONE #1141
DIMENSIONS: 8.175” X 5.0” X 1.5”
SWITCH: SLIDE WITH IN BEZEL
MODEL 312-1
VOLT: 12VDC
HOUSING: ABS WHITE PLASTIC
LENS: CLEAR POLYCARBONATE
LAMP: TWO #1141
DIMENSIONS: 11.43” X 5.0” X 1.5”
SWITCH: SLIDE WITH IN BEZEL
continued manufacturing improvements, UL listings for individual Thin-Lite and S.T. Lighting fixtures will
vary. Please consult factory for current information. Specifications subject to change without notice.
CAMARILLO, CA 93012
20
PHONE: (805) 987-5021
FAX: (805) 388-0921
Sp6series Rev 4 July. 2013
REPLACEMENT LAMPS
PACKAGE
F8T5/CW/TWIN & F15T8/CW/TWIN Cool
White, 4100K, produces a bluish white light
reminiscent of moonlight on cold snow. ThinLite branded lamps are factory tested and
approved for maximum light output and lamp
life. Consult factory for other wattages.
F8T5/WW/TWIN & F15T8/WW/TWIN
Warm White, 3000K, emphasize reds,
yellows, and oranges reminiscent of
candlelight & soft glow of a cozy fire to match
the color, tone, and ambience of incandescent
light. Creates a friendly, intimate atmosphere
without compromising light output.
continued manufacturing improvements, UL listings for individual Thin-Lite and S.T. Lighting fixtures will
vary. Please consult factory for current information. Specifications subject to change without notice.
CAMARILLO, CA 93012
PHONE: (805) 987-5021
FAX: (805) 388-0921
21
530 Constitution Ave. Camarillo, CA 93012
805-987-5021 Fax: 805-388-0921
E-mail: thinlitesales@thinlite.com www.thinlite.com
Recommended Installation procedure for all Thin-Lite Products.
1) Which size wire should I use for installation?
We recommend you use 16- gauge wire for optimal installation of a single fixture. Please see note below
under “How much voltage drop is in my circuit?”
2) What is the recommended Voltage at the battery?
Test input voltage at mounting location of fixture. Thin-Lite 12VDC fixtures are designed for optimal
performance with input power of 12VDC + 2 VDC/ -1.5 VDC.
How much voltage drop is on my circuit?
First, test the voltage on the circuit at the battery. Next, test the voltage at the farthest fixture on a series or
loop run. Subtract the fixture voltage from the battery voltage. This is the amount of voltage you have lost
through your wiring, or your voltage drop. The optimal voltage for lighting is between 13.2 volts and 10.8
volts.
How do I fix a voltage drop problem?
You can fix a voltage drop problem a few different ways:
a) Increase the wire size. Larger wire has a lower resistance, and less voltage drop will occur. See table 1.
CAUTION: DO NOT OVER-AMP WIRE; IT CAN CAUSE FIRE DANGER!
b) If you are using a series run, you can reduce voltage drop by changing it to a loop or T run.
Wire Gauge Max Amps Max Watts Resistance Per foot
12
16
192
.00162
10
24
288
.00108
8
32
384
.00064
Table 1
3) How do I mount the fixture?
a) Carefully remove lens and when necessary remove lamps and reflector to locate mounting
holes in fixture chassis.
b) Attach black wire from fixture to + (positive) power input lead with wire nut or similar
connector (not supplied).
c) Attach white wire from fixture to - (negative) power input lead.
d) Mount fixture on flat surface. Use with at least two threaded fasteners (not supplied).
e) Re-install reflector and lamp(s) and test unit for proper operation.
f) Carefully re-install lens.
22
Info1 Rev 3 Aug. 2012
530 Constitution Ave. Camarillo, CA 93012
805-987-5021 Fax: 805-388-0921
E-mail: thinlitesales@thinlite.com www.thinlite.com
TROUBLESHOOTING ALL FLUORESCENT FIXTURES
Caution and Safety: Troubleshooting techniques require measurements with input voltage applied
requiring extra precautions to avoid electrical shock, please use caution and safety. Use proper
safety equipment such as eye protection and gloves when performing electrical measurements.
Most problems with lights occur when power is interrupted to the light fixture or when the light bulb
or its socket is defective.
If you are not comfortable working with electrical wiring, voltage testers, and the like, try a few
simple procedures detailed below, but, if those do not solve the problem, call an electrician.
ELECTRICAL TEST EQUIPMENT
The following equipment is recommended for testing fluorescent fixtures:
True RMS Voltmeter (voltage ranges 0 to 1000 Volts AC and frequency range of at least 500 KHz for
electronic measurements. Ammeter (clamp-on type acceptable) for magnetic ballast current
measurements and electronic ballast input current measurements. Ranges: 0 to 10 amperes AC with at
least one range 0 to 250 milli-Ampere (mA). Magnetic ballast input and output voltage and current
frequencies are 60 Hz. Input voltages and current frequencies for electronic ballasts are 60 Hz, but the
output frequency of most electronic ballasts is above 40 KHz.
INOPERATIVE FIXTURE- Why doesn't my light fixture work?
Often a fixture becomes inoperative due to causes not attributable to the ballast. It is therefore important to
examine all fixture components before removing the ballast for replacement. We recommend you read the
following:
Question 1- “I have completed the installation but my lights do not turn on”









Check battery voltage.
Check switch on fixture or on Wall.
Check all connections for a bad contact. Make sure all wiring & connections are secure.
Check the line (battery) side of the wiring. Make sure that power is being supplied to the fixture.
Replace or check all lamps to ensure satisfactory operation.
As lamps are removed, examine all sockets to ensure they are not damaged or broken and are making
proper and positive contact with the lamps.
Make sure all lamp sockets are seated properly into sockets.
Examine all electrical connection within the fixture, including at the lamp sockets, to ensure
conformance with the wiring diagram on the ballast.
If it still will not light, check the voltage at the light. Recommended operating voltage is between 11
and 14 VDC.
23

Voltage drop due to loose connections at 12V fused distribution panels is not uncommon in mobile
applications. Adjust torque where needed. Improperly tightened fasteners may reduce voltage
delivered to 12V lights and accessories.

If one or more light fixtures are controlled by a wall switch verify that it is a DC rated switch. The
"DC Rule of Thumb" is “ a switch that is rated at 15A 125VAC will likely perform satisfactorily at
15 amps 12VDC.” Contacts on a non-DC rated switch may become corroded. This increases
resistance and reduces voltage levels. Check voltage at all wall switches and replace if defective or
voltage reading is below 12VDC.

Check all connecting points on the 12VDC wiring harness for corrosion. Clean as needed.

If there is no voltage at the light, check the wire to make sure they are connected. Black wire is
positive (+) and white wire is negative (-). Fixtures are protected against reversed polarity. If
improperly connected, the fixture will simply not turn "on". If the wires are connected properly, and
there is still no voltage to the light, check voltage at battery and fuse box.
Question 2 - “Some of my lights turn on, but not all of them”.





Follow instructions for Question 1 first.
Check for any bad contact between the fixtures.
Make sure the bulb is plugged securely in the socket of the problem light fixture(s).
Make sure that the fixture is installed correctly.
Check the line (battery) side of the wiring. Make sure that power is being supplied to the fixture.
Question 3- “When I turn on the lights, they flicker”.




Check for bad contact between the problem fixture(s). Make sure all bulbs are securely plugged into
the bulb sockets.
The flickering should only be momentary, as it is a built-in protection mechanism against power
surges.
If lamps still flicker, remove lamps from sockets and re-install them in the opposite direction.
Question 4- “My lights are on, but they are dim”.



Make sure all bulbs are fully and securely plugged into the bulb sockets.
Make sure you are not using a dimmer or your fixtures are not connected to a system that features
“cinema” (automatic dimming feature at shut-off) lighting , Thin-Lite do not recommend dimmers
or the such, this will revoke the warranty.
Question 5- “My lights work for a while, but then they shut off”.


Check for bad contact between the fixture(s) and track. Make sure all bulbs are securely plugged into
the bulb sockets.
Replacement Fluorescent Lamps for Thin-Lites
These are standard Lamps, and may be available at your local hardware or can be ordered through local
distributor.
24
FLUORESCENT LAMP TYPES
Fluorescent lamps sold in the United States today are available in a wide variety of shapes and sizes ranging
from miniature versions, rated at 4 watts, 6" in length and 5/8" diameter, to 215-watt types, 96" long and 2"
in diameter. Commercially available fluorescent lamp types include T12, T8, and T4 compact and T5-linear
and compact. Base types include bi-pin, single pin, several compact bases and recessed double contact.
LAMP LIGHT OUTPUT
Lumens are the measurement for lamp light output. Fluorescent lamps are measured in initial lumens or in
design lumens. Initial lumens are a measure of the amount of light that the lamp produces after about 100
hours of operation. Design lumens are a measure of the amount of light that the lamp produces after it has
operated for approximately 40 percent of its rated life. Because light output from a fluorescent lamp
diminishes over the life of the lamp - a process known as Lamp Lumen Depreciation - a lamp's design
lumens (or mean lumens) are always lower than its initial lumens. Lumen maintenance refers to the rate at
which light output declines over time and lumen maintenance percentages are typically based on light output
at 40% of a lamp's rated life.
LAMP LIFE
Lamp Life is a measure of how long a fluorescent lamp operates and determined by that point in time when
50% of the lamps have failed. Lamp life is a function of emitter depletion - when you run out of emitter
emission material the lamp will no longer operate. Some lamps will last longer than the rated life and some
fail sooner.
Starting methods, switch cycles, the type of ballast used and other factors can significantly affect lamp life.
In general, life ratings for fluorescent lamps range from
6,000 to 30,000 hours based on the industry standard of three burning hours per start.
LUMENS PER WATT
Lumens per Watt are a rating of a lamp's light output in relation to the current passing through it or the watts
it uses. The more efficient a lamp, the more lumens it will produce per watt of power consumed. This
measurement (LPW) is also referred to as lamp "efficacy".
What does CW mean?
Alphabetic suffix that follows lamp part number, e.g., F15T8/CW, designates color temperature of lamp. The
correlated temperature of a light source is expressed in Kelvins (K) and is a means of describing the
appearance or chromaticity of the source itself. It describes the apparent whiteness of the lamp. Incandescent
lamps deliver a limited color temperature range between 2700K and 3000K the same color range as a warm
white fluorescent lamp.
Fluorescent lamps offer a wide choice of color temperatures from cool white (CW) 4100K that produces a
bluish white light reminiscent of moonlight on cold snow; Warm White (WW) 2700K to 3400K light with a
yellowish tint, reminiscent of fireplaces and candlelight to Daylight (D) 6000-6500K that is typical of midmorning daylight entering through a window on a sunny day.
What is the difference between Fluorescent, incandescent and LED lamps?
Incandescent Lamps: Regular incandescent lamps produce light by passing an electric current through a
filament in a vacuum or gas filled bulb. They provide low initial cost, good color rendition and excellent
optical control.
Halogen Lamps: Halogen lamps also use a filament; but since it is sealed in a pressurized capsule containing
halogen gas, the lamp provides brighter, whiter light and improved energy efficiency.
LED Lamps; Light from LEDs is concentrated in a beam. Refractive lenses are used to diffuse and spread the
beam but this dramatically reduces light output. They are a good choice if mounted close to the work surface.
LED’s are not recommended for lighting large areas where a wide dispersal of light is needed. Fluorescent
fixtures are the most efficient source of light for illuminating a large area.
25
Linear Fluorescent Lamps: Are 4-5 times more efficient than Halogen or Incandescent lamps. In a
fluorescent lamp, an electric arc passing between cathodes in a tube excites mercury vapor and other gases
and produces UV radiant energy. A phosphor coating on the tube then converts this energy to visible light.
Fluorescent lamps are very energy efficient and provide a wide range of color responses.
Compact Fluorescent Lamps: Compact fluorescent lamps employ small diameter tubes that are bent so they
begin and end in a ceramic base. This allows them to be produced in a wide variety of configurations, greatly
extending the applications for fluorescent lighting.
Relative Efficiency
*32 watt T8 fluorescent
89 to 95 lumens/watt
Standard F40T12 cool white fluorescent
60-65 lumens/watt
Compact fluorescents
60 to 100 lumens/watt
T3 tubular halogen
20 lumens/watt
White, Warm White LED’s
55–75 lumens/watt
Standard 100 watt incandescent
17 lumens/watt
Incandescent night light bulb (7w)
6 lumens/watt
* F32T8 lamps supplied with Thin-Lite fixtures meet or exceed 2009 Department of Energy Lumens per
Watt Regulations effective July 14, 2012.
What is the warranty policy?
The warranty extends to the original purchaser for two years but commercial applications have one-year
warranty. It is limited to rectifying any such defect and/or replacing such defective part, except lamps,
provided the fixture is returned prepaid, with proof of purchase to: Thin-Lite Corp, Attn: QA, 530
Constitution Ave, Camarillo, Ca. 93012. If the fixture has been superseded (new design replaces older
design) replacement will be made with a current model of the same quality performing the equivalent
function. This warranty does not cover labor costs for installation or removal of light fixture and is void on
any light fixture that has been improperly installed, overloaded, abused or altered in any way. Other than the
above described obligation, Thin-Lite Corp. assumes no further liability with respect to the sale or use of its
products.
Limited Lifetime Warranty To Original Purchaser
After two years from the date of purchase (except commercial applications-one year), if the inverter ballast
fails, Thin-Lite Corp. will repair or replace most fixtures with a current production model at a flat rate.
Customer is responsible for freight charges from his location to Thin-Lite factory. UPS ground charges for
return of repaired fixture to customer is included in the flat charge.
26

low voltage fluorescent lighting products - Thin-Lite

Transcription

Similar documents

BevMo! - Bill Brown Sales

HIGH VISIBILITY VEST

Design - ImageFirst

INSIDEOUT Lamp Project

Parasound Halo JC 1 Monaural Amplifier

Setra Model 276 Barometric Pressure Transducer

VPL-GT100

Ted Greene on Guitar Amps

development of a sensing station for field studies

Genetic Analysis of Fluorescent Pigment Production

Application of Flow Cytometry for Rapid Determination of Ploidy