P:\Wpwin\PW\PW001.Rated.Capacity.Charts\MH Series\MH900

®
E-Crane Capacity Charts
MH900 Series (Imperial)
Model MH8248CR-D
PD-E
Model MH8264CR-D
PD-E
SUBJECT TO CHANGE
Doc.nr: PW001.MH900.Series.Model.MH8248.wpd
VERSION : 1.0
DATE : 05-03-2009
E-Crane® Capacity Charts
Material Handlers MH900 Series
Model MH8248
CONTENTS
MH8248CR-D MATERIAL HANDLER . . . . . . . . . 3
Rated Lift Capacity (USton/ft) . . . . . . . . . . . . . . . . . . . 3
MH8248PD-E MATERIAL HANDLER . . . . . . . . . 5
Rated Lift Capacity (USton/ft) . . . . . . . . . . . . . . . . . . . 5
MODEL MH8248 TECHNICAL SPECS . . . . . . . . . 7
SUBJECT TO CHANGE
Doc.nr: PW001.MH900.Series.Model.MH8248.wpd
VERSION : 1.0
DATE : 05-03-2009
E-Crane® MH8248
MH8248CR-D MATERIAL HANDLER
Rated Lift Capacity (USton/ft)
Lift Capacities are stated in US tonnes (USton) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting
surface. The user shall make allowances for job conditions such as soft or uneven ground.
Lift Capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities (indicated via *).
Lift Capacities apply only to the machine as originally manufactured and normally equipped by the manufacturer.
Lift Capacities are in compliance with SAE J2518 : APR2008
The mass of slings and any auxiliary lifting devices shall be deducted from the rated load to determine the net load that may be
lifted.
The operator should be fully acquainted with the operator’s manual and the operating safety manual furnished by the
manufacturer before operating the machine.
The total mass of the machine is 247060 lbs. Included in this mass are 2.46ft double grouser shoes, 52.49ft boom, 32.48ft stick,
8.2ft 76230 lbs counterweight, all operating fluids and a 165 lbs operator.
SUBJECT TO CHANGE
Doc.nr : PW001.MH900.Series.Model.MH8248.wpd
MH900/8248-p.3
VERSION : 1.0
DATE : 05-03-2009
SUBJECT TO CHANGE
Doc.nr : PW001.MH900.Series.Model.MH8248.wpd
MH900/8248-p.4
18950*
18
21800*
24500*
27200*
24
21550*
23850*
26400*
29150*
28850*
30
48
23600*
24200*
24650*
24900*
25000*
24800*
24400*
23700*
22650*
21200*
42
25650*
26400*
27000*
27250*
27300*
27050*
26500*
25650*
24450*
22800*
36
30200*
29800*
30300*
29850*
29100*
27950*
26500*
24500*
60
20200*
20600*
20950*
21300*
21550*
21700*
21700*
21550*
21200*
20600*
19600*
18050*
54
21600*
22100*
22550*
22900*
23100*
23150*
23000*
22650*
22050*
21100*
19650*
19200*
19500*
19750*
20050*
20250*
20450*
20500*
20450*
20300*
19900*
19200*
18000*
66
18500*
18500*
18600*
18750*
18900*
19100*
19250*
19400*
19500*
19500*
19400*
19100*
18600*
72
18350*
18450*
18550*
18600*
18650*
18650*
18550*
18300*
78
Load @max radius
L [lbf]
R [ft]
18500*
72,1
18400*
74,9
18350*
77,1
18300*
78,9
18250*
80,1
18250*
80,9
18250*
81,2
18300*
81,1
18300*
80,6
18300*
79,6
18300*
78,1
18250*
76,1
18200*
73,6
18050*
70,5
17800*
66,7
17400*
62,1
The total mass of the machine is 247060 lbs. Included in this mass are 2.46ft double grouser shoes, 52.49ft boom, 32.48ft stick, 8.2ft 76230 lbs counterweight, all operating fluids and a 165
lbs operator.
The operator should be fully acquainted with the operator's manual and the operating safety manual furnished by the manufacturer before operating the machine.
The mass of slings and any auxiliary lifting devices shall be deducted from the rated load to determine the net load that may be lifted.
Lift Capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities (indicated via *).
Lift Capacities apply only to the machine as originally manufactured and normally equipped by the manufacturer.
Lift Capacities are in compliance with SAE J2518 : APR2008
Lift Capacities are stated in pounds (lbf) on the lifting gear's stick tip, and can be lifted 360° on firm, level supporting surface. The user shall make allowances for job conditions such as soft
or uneven ground.
NOTE:
R [ft]
H [ft]
72
66
60
54
48
42
36
30
24
18
12
6
0
-6
-12
-18
MH900 Series Model 8248CR-D Material Handler, acc. SAE J2518: APR2008
E-Crane® MH8248
VERSION : 1.0
DATE : 05-03-2009
E-Crane® MH8248
MH8248PD-E MATERIAL HANDLER
Rated Lift Capacity (USton/ft)
Lift Capacities are stated in US tonnes (USton) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting
surface. The user shall make allowances for job conditions such as soft or uneven ground.
Lift Capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities (indicated via *).
Lift Capacities apply only to the machine as originally manufactured and normally equipped by the manufacturer.
Lift Capacities are in compliance with SAE J2518 : APR2008
The mass of slings and any auxiliary lifting devices shall be deducted from the rated load to determine the net load that may be
lifted.
The operator should be fully acquainted with the operator’s manual and the operating safety manual furnished by the
manufacturer before operating the machine.
The total mass of the machine is 196460 lbs. Included in this mass are upper revolving frame, pedestal, column, 52.49ft boom,
32.48ft stick, 8.2ft 76230 lbs counterweight, all operating fluids and a 165 lbs operator.
SUBJECT TO CHANGE
Doc.nr : PW001.MH900.Series.Model.MH8248.wpd
MH900/8248-p.5
VERSION : 1.0
DATE : 05-03-2009
SUBJECT TO CHANGE
Doc.nr : PW001.MH900.Series.Model.MH8248.wpd
MH900/8248-p.6
18950*
18
21800*
24500*
27200*
24
21550*
23850*
26400*
29150*
28850*
30
48
23600*
24200*
24650*
24900*
25000*
24800*
24400*
23700*
22650*
21200*
42
25650*
26400*
27000*
27250*
27300*
27050*
26500*
25650*
24450*
22800*
36
30200*
29800*
30300*
29850*
29100*
27950*
26500*
24500*
60
20200*
20600*
20950*
21300*
21550*
21700*
21700*
21550*
21200*
20600*
19600*
18050*
54
21600*
22100*
22550*
22900*
23100*
23150*
23000*
22650*
22050*
21100*
19650*
19200*
19500*
19750*
20050*
20250*
20450*
20500*
20450*
20300*
19900*
19200*
18000*
66
18500*
18500*
18600*
18750*
18900*
19100*
19250*
19400*
19500*
19500*
19400*
19100*
18600*
72
18350*
18450*
18550*
18600*
18650*
18650*
18550*
18300*
78
Load @max radius
L [lbf]
R [ft]
18500*
72,1
18400*
74,9
18350*
77,1
18300*
78,9
18250*
80,1
18250*
80,9
18250*
81,2
18300*
81,1
18300*
80,6
18300*
79,6
18300*
78,1
18250*
76,1
18200*
73,6
18050*
70,5
17800*
66,7
17400*
62,1
The total mass of the machine is 196460 lbs. Included in this mass are upper revolving frame, pedestal, column, 52.49ft boom, 32.48ft stick, 8.2ft 76230 lbs counterweight, all operating fluids
and a 165 lbs operator.
The operator should be fully acquainted with the operator's manual and the operating safety manual furnished by the manufacturer before operating the machine.
The mass of slings and any auxiliary lifting devices shall be deducted from the rated load to determine the net load that may be lifted.
Lift Capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities (indicated via *).
Lift Capacities apply only to the machine as originally manufactured and normally equipped by the manufacturer.
Lift Capacities are in compliance with SAE J2518 : APR2008
Lift Capacities are stated in pounds (lbf) on the lifting gear's stick tip, and can be lifted 360° on firm, level supporting surface. The user shall make allowances for job conditions such as soft
or uneven ground.
NOTE:
R [ft]
H [ft]
72
66
60
54
48
42
36
30
24
18
12
6
0
-6
-12
-18
MH900 Series Model 8248PD-E Material Handler, acc. SAE J2518: APR2008
E-Crane® MH8248
VERSION : 1.0
DATE : 05-03-2009
E-Crane® MH8248
MODEL MH8248 TECHNICAL SPECS
Specifications
English (*)
Specifications
Metric (*)
15'-7"
4,750 m
81'-3.3/16"
24,769 m
22'-3.3/16"
6,787 m
77'-2.1/2"
23,533 m
+45°/-27.5°
+45°/-27.5°
+55°/-45°
+55°/-45°
360° continuous
360° continuous
Operating Range:
(related to ground reference plane (GRP) +0 and
centerline of rotation)
Minimum Outreach Range
(from centerline of rotation)
Maximum Outreach
(from centerline of rotation)
Downreach Range
(below GRP)
Lifting Range
(vertical lift)
Boom Operating Angles
(above and below horizontal)
Stick Operating Angles
(before and after vertical)
Degrees of Rotation
Main Hydr. & Elec. Specs:
CR-D
PD-E
CR-D
PD-E
-
3-Phase 480
Volts AC, 60
Hz
-
3-Phase 400
Volts AC, 50
Hz
200 kVA
-
200 kVA
-
150 hp
150 hp
110 kW
110 kW
101.7 gpm
101.7 gpm
385 l/min
385 l/min
4640 psi
4640 psi
320 bar
320 bar
Max. Flow
29.5 gpm
29.5 gpm
112 l/min
112 l/min
Max. Working Circuit Pressure
4061 psi
4061 psi
280 bar
280 bar
4650 psi
4650 psi
32.000 kPa
32.000 kPa
300 USgal
300 USgal
1.135 l
1.135 l
Power Supply
Generator
Electrical Motor
Implement Pumps
Max. Flow
Max. Working Circuit Pressure
Swing Pump
Hydraulic System Relief Setting
Hydraulic Tank Refill Capacity
Dimensions:
Boom Length
52'-5.15/16"
16 m
Stick Length
32'-5.3/4"
9,9 m
159.500 lbs
72.500 kg
Total Weight Superstructure**
Total Weight Model MH8248 as standard equipped
CR-D
PD-E
CR-D
PD-E
247.060 lbs
196.460 lbs
112.300 kg
89.300 kg
(*) Materials and specifications are subject to change without notice.
See your E-Crane® dealer for available options.
(**) Operating weight does include lubricants, hydraulic oil and operator
©2009 E-Crane Worldwide / Indusign.All rights reserved. All technical specifications are subject to change without prior notice and
without incurring responsibility for material handlers previously sold! Changes, errors and misprints reserved.
SUBJECT TO CHANGE
Doc.nr : PW001.MH900.Series.Model.MH8248.wpd
MH900/8248-p.7
VERSION : 1.0
DATE : 05-03-2009