Complete SLP Ordering Guide

Transcription

PRODUCT SELECTION GUIDE
TM
LOW GLARE PARABOLIC LOUVERS
ALUMINUM LOUVERS
BAFFLES
LENSES
RETROFIT KITS
WEATHERPROOF GASKETED ENCLOSURES
WE ARE NOT JUST IN THE BUSINESS OF LIGHTING PRODUCTS...
WE ARE IN THE BUSINESS OF LIGHTING SOLUTIONS.
Product offering and specifications
subject to change without notice.
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
DIRECTORY
Introduction
Definitions
Finishes
Add-A-Flange
Parabolic Louvers
P1
PARASQUARE 1®
Aluminum Louvers,
Baffles & Retrofit Kits
P2
PARASQUARE 2®
L14
LUMIFLUX 14™
P3
PARASQUARE 3®
LB14
PARABOLIC ALUMINUM BAFFLES
P4
PARASQUARE 4®
ATTB
STRAIGHT BLADE BAFFLES
P5
PARASQUARE 5®
AT
ALUMINUM EGGCRATE
RFK2
RFK3
Decorative Louvers
Injection Molded Lenses,
Wraps & Safety Tubes
WIM
INJECTION MOLDED
WRAP AROUNDS
GEN
WRAP AROUND LENSES
VP60
VP60
RETROFIT KIT 2
DL
DROP LENS
RETROFIT KIT 3
STG
SAFETY TUBE GUARDS
T5HO
T5HO GUARDS
P6
PARAHEX®
D33
DECORONA 33™
Aluminum & Knock Down
D50
DECORONA 50™
L30
LUMIFLUX 30™
Citadel Enclosures
L30KD
L30 KNOCK DOWN
CT2
CITADEL 2™
L14KD
L14 KNOCK DOWN
CT4
CITADEL 4™
KDH
KNOCK DOWN HARDWARE
CT4i
CITADEL 4i™
Specialties
AF
ANGLEFLEX™
IL1/IL6
METRIC PARABOLICS
T5
HI-CELL™
Eggcrates
TC
TC
TC500
TC500
T3060
T3060
T
T
ME
METRIC EGGCRATES
Flat Sheet & Lenses
ES
EXTRUDED SHEETS
PR12
PATTERN 12
PR15
PATTERN 15
PR19
PATTERN 19
MP
MIRROR PANEL
Citadel LED
Enclosure Components
CT2LED
CITADEL 2™ LED STYLE 1
CT2LED
CT2LED
CT4LED
CITADEL 4™ LED
CT4ILED
CITADEL 4i™ LED
CT4S
CITADEL 4S™ LED
Enclosure
Replacement Parts
CT1
CITADEL 1™
CT2
CITADEL 2™
CT4
CITADEL 4™& 4i
Index
Terms & Conditions
Policies
Product offering and specifications subject to change without notice.
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
SLP DEFINITIONS
Parabolic
-curved; not flat
Louver
-cells arranged in a square configuration. The walls of the cells can be
either parabolic or flat
Eggcrate
-cells arranged in a square configuration with cell walls that are flat or
straight
Lens
-flat sheet of plastic that is usually clear or white. Available in various
patterns to reduce the image of the lamps. One exception is Mirror Panel
which is not used with lamps
Baffle
- ladder configuration of cells, the cross blades can be either parabolic or flat
Add-A-Flange
- when dimension requirements cannot be satisfied by cutting or using a style 4, 4X or 5;
Add-A-Flange may be utilized to adadpt louvers to your special needs
Ceiling Style
-louvers with out a perimeter flange; Styles 1, 2 and Metric louvers
Fixture Style
-louvers with a perimeter flange or lip; Styles 4, 4X and 5 louvers
Style 1
-refers to a louver with dimensions exact or nominal to 23-3/4” x 47-3/4”; Ceiling Style
Style 4
-refers to a louver with dimensions exact or nominal to 22-3/4” x 46-3/4”; Fixture Style
Style 4X
-refers to a louver with dimensions exact or nominal to 22-1/2” x 46-1/2”; Fixture Style
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
Finishes
Specular Finish
• Precise distribution of light
• For areas where brightness control is critical
• Wide range of product to meet your requirements
Specular Finish
Aluma-Lux(Semi-specular)
Permalux Finish
• Years of easy maintenance
• Contaminants simply wipe away
• Accidents are corrected with minimal effort
Aluma-Lux Finish (Semi-specular)
• Short lead time
• No cave effect or sharp shadows
• Does not show fingerprints or dust
• Will not bend or dent
Available Finishes
Specular - Highly reflective mirror finish
Permalux - Enhanced polymer encapsulation protects the
Specular Finish
Aluma-Lux - Pleasing look of aluminum at the plastic price
Specular Gold - Rich non-fading mirror-like finish
Specular Gold Finish
• Decorative finish for those special areas
• Great for hospitality industry
*Black and White Available on Selected Items
Parabolic Louvers
Number of
Product
P1
Product Size
.62 x .62 x .45”
16 x 16 x 12mm
1.5 x 1.5 x 1.0”
P2
38 x 38 x 25mm
.75 x .75 x .48”
P3
9 x 19 x 12mm
3 x 3 x 1.50”
P4
76 x 76 x 38mm
.75 x .75 x .35”
P5
19 x 19 x 9mm
.61 (HEX) x .50”
P6
16 x 16 x 13mm
.81 x .81 x .75”
AF
20 x 20 x 18mm
*Specular Finish
Shielding Angle/Cut Off*
(measured in degrees)
42/48
Transmission
Factor
0.52
Unflanged
Flanged
I
I
38/52
0.64
I
I
35/55
0.78
I
I
30/60
0.57
I
I
29/61
0.86
I
I
45/45
0.51
I
DIRECTIONAL
0.5
I
Metric
I
I
I
Add-A-Flange available for ALL louvers
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
Add-A-Flange
When dimensional requirements cannot be satisfied by cutting or by using
Style 4, 4X or Style 5 louvers, Add-A-Flange may be utilized to adapt louvers to your special needs
If Fixture Door Frame Does Not Accept Louver Thickness
(or louvers with molded flange):
If fixture housing does not accept louver thickness
or a reveal effect is desired
FLANGE
LENGTH
1
COMPATABLE
ADD-A-FLANGE
LR4475
LR2125
LR475
LR2125
LR3
1
LR3125
LOUVER
STYLE
P1
1
P1
2
P2
P2
D50
P3
D33
P4
P5
1
1
1
P6
1
ANGLEFLEX
ALL
LOUVER LENS
1
LR275
LR2125
LRP4
LR2125
LR275
LR2125
LR3125
LR3
LR275
FLANGE
FINISHES
LR2125
CHROME
LR275
CHROME
LR3
CHROME
LR3125
1.125"
CHROME
GOLD
BLACK
WHITE
LR4475
0.75"
CHROME
BLACK
LRP4
CHROME
GOLD
BLACK
WHITE
0.75"
0.75"
0.75"
1.00"
1.125"
0.75"
1.00"
0.75"
Flange-up = adding the flange
on back side or inverted Shows
black when trimmed in silver
*Call For Details
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
PLASTIC LOUVERS
PARASQUARE 1®
PARASQUARE 2®
PARASQUARE 3®
PARASQUARE 4®
PARASQUARE 5®
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
P1
PARASQUARE 1®
SMALL CELL LOW GLARE PARABOLIC LOUVER
CEILING STYLE
5/8” X 5/8” X .400”
*ESP: 9/16” X 9/16” X .400”
16 x 16 x 10,2mm
14,3 x 14,3 x 10,2mm
P1® is the internationally recognized industry standard small cell
injection molded plastic parabolic louver. The nominal 5/8” x 5/8”
x 7/16” (16 x 16 x 10,2mm) cell size provides luminances that
conform to important major standards. P1 is available in molded
configurations that are readily adapted to the widest range of
applications and dimensional modules.
STYLE 1
CEILING
.400”, 10,2mm
48°
42°
52% of fixture lumens
.625ì
16mm
STYLE 1 - ESP*
P1® - STYLE 1
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
SATIN BLACK
*GLOSS BLACK
STYLE 2
.98
P1® - STYLE 2
CEILING STYLE
2X4
23-11/16” X 47-11/16”
.625ì
603 X 1213mm
16mm
2X2
23-11/16” X 23-11/16”
603 x 603mm
1X4
11-3/4” X 47-11/16”
298 x 1213mm
10 PCS/CTN 37 LBS / 17kg
20 PCS/CTN: 37 LBS / 17kg
P1-24-1
P1-22-1
P1-24-1-P
P1-22-1-P
P1-24-1-AL
.625ì
16mm
P1-24-1-G
P1-24-1-BB
*P1-24-1-BB-BT
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
.625ì
16mm
.400”, 10,2mm
CEILING STYLE
.98
.400”, 10,2mm
.625ì
16mm
*P1® - STYLE 1-ESP
10‘
.625ì
16mm
.400”
10,2mm
.400”, 10,2mm
.563”
14,3mm
VCP
HEIGHT MEAN
MODE
.400”,
10,2mm
.99
8.5‘
.99
P1-14-1
P1-14-1-P
.400”, 10,2mm
P1-22-1-AL
P1-14-1-AL
P1-22-1-G
P1-14-1-G
P1-22-1-BB
P1-14-1-BB
*P1-22-1-BB-BT
*P1-14-1-BB-BT
2X4
23-11/16” x 47-11/16”
572mm x 1183mm
2X2
23-11/16” x 23-11/16”
572mm x 572mm
10 PCS/CTN: 55LBS/ 25kg
ACRYLIC
.400”, 10,2mm
2X4
.625ì
23-11/16” X 47-3/4”
16mm
603 X 1213mm
P1-A-24-2
P1-A-24-2-P
P1-A-24-2-AL
.625ì
P1-A-24-2-G
16mm
*P1-A-24-2-BB
*P1-A-24-2-BB-BT
1X4
11-3/4” x 47-11/16”
267mm x 1183mm
*P1-24-1-ESP
*P1-22-1-ESP
*P1-14-1-ESP
*P1-24-1-ESP-P
*P1-22-1-ESP-P
*P1-14-1-ESP-P
*P1-24-1-ESP-AL
*P1-22-1-ESP-AL
*P1-14-1-ESP-AL
*P1-24-1-ESP-G
*P1-22-1-ESP-G
*P1-14-1-ESP-G
.400”, 10,2mm
*This product is MADE TO ORDER. Please call SLP for details on availablility
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
P1
PARASQUARE 1®
SMALL CELL LOW GLARE PARABOLIC LOUVER
FIXTURE STYLE
4 and 4X : 5/8” X 5/8” X .400”
16 x 16 x 10,2mm
10,2mm
P1® is the internationally recognized.400”,
industry
standard small cell injection
molded plastic parabolic louver. The fixture style parts include an integral
.625ì full size or trimmed to achieve lesser overall
flange that may be used
16mm
dimensions. The style
4X is molded to a generic size that fits many fixtures
without trimming. Other
VCP
sizes can be fabricated.
CEILING
.400”, 10,2mm
HEIGHT
MEAN
MODE
Call for details.
42°
.99
8.5‘
.99
STYLES 4 and 4X
48°
.625ì
16mm
10‘
.98
.98
.400”, 10,2mm
.625ì
16mm
P1® - STYLE 4
FIXTURE STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
ACRYLIC
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
P1® - STYLE 4X
FIXTURE STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
ACRYLIC
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
2X4
2X2
OA: 22-13/16” X 46-13/16” OA: 22-13/16” X 22-13/16”
.400”, 10,2mm
ID: 20-15/16” X 44-15/16”
ID: 20-15/16” X 20-15/16”
10 PCS/CTN: 39 LBS/20kg
P1-24-4.625ì
P1-22-4
P1-24-4-P
P1-22-4-P
P1-24-4-AL
P1-22-4-AL
P1-24-4-G
P1-22-4-G
16mm
P1-A-24-4
P1-A-22-4
P1-A-24-4-P
P1-A-22-4-P
P1-A-24-4-AL
P1-A-22-4-AL
P1-A-24-4-G
P1-A-22-4-G
2X4
OA: 22-1/2” X 46-1/2”
ID: 20-15/16” X 44-15/16”
2X2
OA: 22-1/2” X 22-1/2”
ID: 20-15/16” X 20-15/16”
10 PCS/CTN: 39LBS/18kg
P1-24-4X
P1-22-4X
P1-24-4X-P
P1-22-4X-P
P1-24-4X-AL
P1-22-4X-AL
P1-24-4X-G
P1-22-4X-G
10 PCS/CTN: 39LBS/18kg
P1-A-24-4X
P1-A-22-4X
P1-A-24-4X-P
P1-A-22-4X-P
P1-A-24-4X-AL
P1-A-22-4X-AL
P1-A-24-4X-G
P1-A-22-4X-G
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
PARASQUARE 2®
MEDIUM CELL LOW GLARE PARABOLIC LOUVER
P2
CEILING STYLE
1-1/2” X 1-1/2” X 1”
38 x 38 x 25,4mm
P2® is the industry standard 1-1/2” x 1-1/2” x 1”
(38 x 38 x 25,4mm) injection molded plastic parabolic louver.
This internationally accepted product satisfies the demands of
both efficiency and luminance control. Molded in a number of
configurations P2 is adaptable to a wide range applications. P2
is an important option when a medium scale plastic parabolic
louver is required.
52°
38°
CEILING
HEIGHT
8.5‘
10‘
VCP
MEAN
.98
.99
MODE
.99
.99
STYLE 1
1.00“
25,4mm
1.50“
38,1mm
P2® - STYLE 1
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
SATIN BLACK
GLOSS BLACK
ACRYLIC
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
WHITE
2X4
23-11/16” X 47-3/4”
603 X 1213mm
2X2
23-11/16” X 23-3/4”
603 x 603mm
1X4
11-3/4” X 47-3/4”
298 x 1213mm
P2-24-1
P2-22-1
P2-14-1
P2-22-1-P
P2-14-1-P
P2-24-1-P
P2-24-1-AL
P2-22-1-AL
1.00“
25,4mm
P2-22-1-G
P2-14-1-AL
P2-24-1-BB
P2-22-1-BB
P2-14-1-BB
P2-24-1-BT
1.50“
P2-22-1-BT
P2-14-1-BT
P2-A-24-1
P2-A-22-1
P2-A-14-1
P2-A-24-1-P
P2-A-22-1-P
P2-A-14-1-P
P2-A-24-1-AL
P2-A-22-1-AL
P2-A-14-1-AL
P2-A-24-1-G
P2-A-22-1-G
P2-A-14-1-G
P2-A-24-1-W
P2-A-22-1-W
P2-A-14-1-W
P2-24-1-G
38,1mm60 LBS / 27
8 PCS/CTN
P2-14-1-G
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
P2
PARASQUARE 2®
MEDIUM CELL LOW GLARE PARABOLIC LOUVER
FIXTURE STYLE 4 & 4X
1-1/2” X 1-1/2” X 1”
38 x 38 x 25,4mm
P2® is the industry standard 1-1/2” x 1-1/2” x 1” (38 x 38 x 25,4mm)
1.00“
injection molded plastic parabolic louver.
This internationally accepted
25,4mm
product satisfies the demands of both efficiency and luminance control.
The fixture style parts include
an integral flange that may be used full
1.50“
38,1mm
size or trimmed to achieve
lesser overall dimensions. The style 4X is
molded to a generic size that fits many fixtures without trimming. Other
sizes can be fabricated. Call for details.
1.00“
25,4mm
STYLE 4 and 4X
1.00“
25,4mm
1.50“
38,1mm
P2® - STYLE 4
FIXTURE STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
ACRYLIC
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
P2® - STYLE 4X
FIXTURE STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ACRYLIC
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
52°
38°
2X4
22-3/4” X 46-3/4”
ID: 20-3/8” X 44-3/8”
2X2
22-3/4” X 22-3/4”
ID: 20-3/8” X 20-3/8”
P2-24-4
P2-22-4
P2-24-4-P
P2-22-4-P
P2-24-4-AL
P2-22-4-AL
P2-24-4-G
P2-22-4-G
P2-A-24-4
P2-A-22-4
P2-A-24-4-P
P2-A-22-4-P
P2-A-24-4-AL
P2-A-22-4-AL
P2-A-24-4-G
P2-A-22-4-G
2X4
22-1/2” X 46-1/2”
ID: 20-3/8” X 44-3/8”
2X2
22-1/2” X 22-1/2”
ID: 20-3/8” X 20-3/8”
P2-24-4X
P2-22-4X
P2-24-4X-P
P2-22-4X-P
P2-A-24-4X
P2-A-24-4X-P
CEILING
HEIGHT
8.5‘
10‘
VCP
MEAN
.98
.99
1.50“
38,1mm
MODE
.99
.99
STYLE 4 - 1X4
.875”1.00“
25,4mm
22,2mm
1.50“
38,1mm
P2® - STYLE 4
FIXTURE STYLE
1X4
10-3/4" X 46-3/4"
ID: 9-1/8 X 45-1/16
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
P2-14-4
P2-14-4-P
P2-14-4-AL
P2-14-4-G
ACRYLIC
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
WHITE
P2-A-14-4
P2-A-14-4-P
P2-A-14-4-AL
P2-A-14-4-G
P2-A-14-4-W
P2-A-24-4X-AL
P2-A-24-4X-G
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
P3
PARASQUARE 3®
ENHANCED EFFICIENCY LOW GLARE LOUVER
CEILING STYLE
3/4” X 3/4” X 1/2”
19 x 19 x 12,2mm
Parasquare 3® with mid-sized 3/4” x 3/4” x 1/2” (19 x 19 x 12,2mm)
cells provide 35 degree shielding and maintains energy saving
efficiencies. P3® reflects SLP’s commitment to high efficiency
louvers by offering not only an unsurpassed optically engineered
wedge back design but also the molded louver configurations that
will maximize energy budgeted applications. For the world market
P3® is molded in a versatile unflanged metric panel size.
STYLE 1
55°
78% of Fixture Lumens
P3® - STYLE 1
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
ACRYLIC
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
WHITE
*P3® - METRIC
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
35°
CEILING
HEIGHT
8.5‘
10‘
VCP
MEAN
.95
.91
.48”
12,2mm
MODE
.97
.93
.75”
19mm
2X4
23-11/16” X 47-11/16”
603 X 1213mm
2X2
23-11/16” X 23-3/4”
603 x 603mm
1X4
11-3/4” X 47-11/16”
298 x 1213mm
P3-24-1
P3-22-1
P3-14-1
P3-24-1-P
P3-22-1-P
P3-14-1-P
P3-24-1-AL
P3-22-1-AL
P3-14-1-AL
P3-24-1-G
P3-22-1-G
.48”
12,2mm
.75”
19mm
P3-14-1-G
P3-A-24-1
P3-A-22-1
P3-A-14-1
P3-A-24-1-P
P3-A-22-1-P
P3-A-14-1-P
P3-A-24-1-AL
P3-A-22-1-AL
P3-A-14-1-AL
P3-A-24-1-G
P3-A-22-1-G
P3-A-14-1-G
P3-A-24-1-W
P3-A-22-1-W
P3-A-14-1-W
620 X 1245
OA: 24-13/32” X 49”
*P3-M6
*P3-M6-P
*P3-M6-AL
*P3-M6-G
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
PARASQUARE 3®
ENHANCED EFFICIENCY LOW GLARE LOUVER
P3
FIXTURE STYLE
3/4” X 3/4” X 1/2”
19 x 19 x 12,2mm
P3® with mid-sized 3/4” x 3/4” x 1/2” (19 x 19 x 12,2mm) cells provide
35 degree shielding and maintains energy saving efficiencies. P3®
reflects SLP’s commitment to high efficiency louvers by offering not
only an unsurpassed optically engineered wedge back design but also
the molded louver configurations that will maximize energy budgeted
applications. The four flanged configurations assure finished parts with
the best fit and the minimum amount of exposed flange.
55°
35°
CEILING
HEIGHT
8.5‘
10‘
.48”
12,2mm
VCP
MEAN
MODE
.75” .97
.95
19mm
.91
.93
STYLE 4
.48”
12,2mm
.75”
19mm
P3® - STYLE 4
FIXTURE STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
ACRYLIC
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
2X4
OA:22-9/16” X 46-9/16”
ID: 20-7/16” X 44-9/16”
2X2
22-9/16” X 22-9/16”
ID: 20-7/16” X 20-7/16”
10 PCS/CTN 30 LBS/ 13.6KG
20 PCS/CTN: 30 LBS/ 13.6KG
P3-24-4
P3-22-4
P3-24-4-P
P3-22-4-P
P3-24-4-AL
P3-22-4-AL
P3-24-4-G
10 PCS/CTN 42 LBS/19kg
P3-22-4-G
20 PCS/CTN: 30 LBS/ 13.6KG
P3-A-24-4
P3-A-22-4
P3-A-24-4-P
P3-A-22-4-P
P3-A-24-4-AL
P3-A-22-4-AL
P3-A-24-4-G
P3-A-22-4-G
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
P4
PARASQUARE 4®
LARGE CELL LOW GLARE PARABOLIC LOUVER
ALC Paracube III
CEILING STYLE
3” X 3” X 1-1/2”
76 x 76 x 38mm
The Parasquare 4® combines superior beauty, light control and
the highest light transmission in a plastic louver. This larger cell
louver offers the highest efficiency and coefficient of utilization of
any member of the Parasquare® family. The Parasquare 4® is ideal
in high ceiling applications, offices with greater spacing between
light fixtures, corridors, public and general offices, and retail
merchandising applications where “light for selling” is critical.
•
•
•
•
Outstanding for use where broader
light distribution is desired
Luminaire Efficiency to 67.8%
Coefficient of Utilization to .74
Visual Comfort Probability to 88
STYLE 1
1-1/2”
38mm
3”
76mm
P4® - STYLE 1
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
ACRYLIC
WHITE
2X4
23-3/4” x 47-3/4”
603mm x 1213mm
2X2
23-3/4” x 23-3/4”
572mm x 572mm
1X4
11-3/4” x 47-3/4”
267mm x 1183mm
5 PCS/CTN: 41LBS/ 18.6kg
P4-24-1
P4-22-1
P4-14-1
P4-24-1-P
P4-22-1-P
P4-14-1-P
P4-24-1-AL
P4-22-1-AL
P4-14-1-AL
P4-24-1-G
P4-22-1-G
P4-14-1-G
*P4-A-24-1-W
*P4-A-22-1-W
*P4-A-14-1-W
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
P5
PARASQUARE 5®
HIGH EFFICIENCY CONTROLLED GLARE LOUVER
CEILING STYLE
3/4” X 3/4” X 3/8”
19 x 19 x 9mm
P5® is the low brightness louver of choice when energy budgeting
is critical and controlled luminance is required. The 3/4” x 3/4” x 3/8”
(19 x 19 x 9mm) flat back louver design affords efficiencies equal to
those of lenses while maintaining 99% of it‘s distribution in the 0-60
degree zone. SLP’s P5® is available in molded metric panel sizes*:
available on special order, ceiling size 2‘ x 4’ and two flanged sizes.
Custom sizes are available. Call for details.
* 595 x 1195mm and 620 x 1245mm
61°
29°
CEILING
HEIGHT
8.5‘
10‘
VCP
MEAN
.94
.89
.35“ 9mm
MODE
.96
.91
.75“
19mm
STYLE 1
.35“ 9mm
.75“
19mm
P5® - STYLE 1
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
ACRYLIC
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
P5® - METRIC
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
2X4
23-11/16” X 47-11/16”
603 X 1213mm
2X2
23-11/16” X 23-3/4”
603 x 603mm
1X4
11-3/4” X 47-11/16”
298 x 1213mm
P5-24-1
P5-22-1
P5-14-1
P5-24-1-P
P5-22-1-P
P5-14-1-P
P5-24-1-AL
P5-22-1-AL
P5-14-1-AL
P5-24-1-G
P5-22-1-G
P5-14-1-G
P5-A-24-1
P5-A-22-1
P5-A-14-1
P5-A-24-1-P
P5-A-22-1-P
P5-A-14-1-P
P5-A-24-1-AL
P5-A-22-1-AL
P5-A-14-1-AL
P5-A-24-1-G
P5-A-22-1-G
P5-A-14-1-G
595 x 1195
OA: 23-7/16” X 47-1/16”
P5-M5
P5-M5-P
P5-M5-AL
P5-M5-G
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
PARASQUARE 5®
HIGH EFFICIENCY CONTROLLED GLARE LOUVER
P5
FIXTURE STYLE
3/4” X 3/4” X 3/8”
19 x 19 x 9mm
P5® is the low brightness louver of choice when energy
budgeting is critical and controlled luminances are
required. The 3/4” x 3/4” x 3/8” (19 x 19 x 9mm) flat
back louver design affords efficiencies equal to those of
prismatic lenses while maintaining 99% of it‘s distribution
in the 0-60 degree zone. SLP’s P5® is available in two
flanged sizes that will fit many fixtures without any cutting
or modification. Special sizes and fabrication are available.
Call for details.
61°
29°
CEILING
HEIGHT
8.5‘
10‘
VCP
MEAN
.94
.89
MODE
.96
.91
STYLE 4
.35“ 9mm
.75“
19mm
P5® - STYLE 4
FIXTURE STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
ACRYLIC
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
2X4
22-9/16” X 46-9/16”
ID: 20-7/16” X 44-9/16”
.75“
19mm
2.35“
X 29mm
22-9/16” X 22-9/16”
ID: 20-7/16” X 20-7/16”
P5-24-4
P5-22-4
P5-24-4-P
P5-22-4-P
P5-24-4-AL
P5-22-4-AL
P5-24-4-G
P5-22-4-G
P5-A-24-4
P5-A-24-4-P
P5-A-24-4-AL
P5-A-24-4-G
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
DECORATIVE LOUVERS
PARAHEX®
DECORONA™
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
P6
PARAHEX®
VERY LOW GLARE PARABOLIC LOUVER
HEXAGONAL CELLS
3/4” X 3/4” X 1/2”
19 x 19 x 12,7mm
SLP‘s Parahex (P6)® provides the highest degree of
uniform cut-off that is available from a small cell louver.
3/4” X 3/4” X 1/2” (19 x 19 x 12,7mm) flat back cells
produce less than half the luminance in the 45 degree zone
than competing products. P6’s® hexagonal cells offer
equally high degrees of brightness control in the parallel,
perpendicular and diagonal zones. This organic form offers
not only superior lighting control, but also provides an
understated decorative alternative to square celled louvers.
45°
45°
CEILING
HEIGHT
8.5‘
10‘
VCP
MEAN
100
100
MODE
100
100
.50“ 12,7mm
.75"
.625“
19mm
16mm
P6®
2X4
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
2X2
1X4
23-11/16” X 47-11/16”
603 X 1213mm
23-11/16” X 23-3/4”
603 x 603mm
11-3/4” X 47-11/16”
298 X 1213mm
P6-24
P6-22
P6-14
P6-24-P
P6-22-P
P6-14-P
P6-24-AL
P6-22-AL
P6-14-AL
P6-24-G
P6-22-G
P6-14-G
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
D
DECORONA™
DECORATIVE PARABOLIC LOW GLARE LOUVER
CIRCLE WITHIN A SQUARE
Decorona™ 33 and 50 offer the original “circle within a square
motif” that has been copied but never equaled. This marriage
of geometric forms produces a pleasing array of contrasting
luminances and surfaces. The parabolic cone‘s completely uniform
low brightness cut-off is set off by the square cell’s slightly elevated
.75” 19mm
reflections. This European designed metric size product
is now
manufactured in North America for the world market.
DECORONA 33
1.30“
33mm
.75” 19mm
1.30“
33mm
DECORONA 50
1.31“ 33mm
1.97“
50mm
DECORONA 33™
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
SILVER / BLACK
SPECULAR GOLD
7 PCS/CTN: 75 LBS/ 20kg
1.97“
D33-24
50mm
D33-24-P
DECORONA 50™
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
SILVER / BLACK
SPECULAR GOLD
2X4
2X2
1.31“ 33mm
23-5/8” X 47-5/16”
23-5/8” X 23-5/8”
600 X 1200mm
600 X 600mm
1X4
11-3/4” x 47-5/16”
30 x 1200mm
D33-22
D33-14
D33-22-P
D33-14-P
D33-24-SB
D33-22-SB
D33-14-SB
D33-24-G
D33-22-G
D33-14-G
2X4
23-5/8” X 47-3/8”
600 X 1200mm
2X2
23-5/8” X 23-5/8”
600 X 600mm
1X4
11-3/4” x 47-3/8”
30 x 1200mm
5 PCS/CTN: 54 LBS/ 24,5kg
D50-24
D50-22
D50-14
D50-24-P
D50-22-P
D50-14-P
D50-24-SB
D50-22-SB
D50-14-SB
D50-24-G
D50-22-G
D50-14-G
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
SPECIALTIES
ANGLEFLEX™
ANGLEFLEX
IL-1 / IL-6
HICELL™
HICELL
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
AF
ANGLEFLEX™
DIRECTIONAL PARABOLIC LOW GLARE LOUVER
3/4” X 3/4” X 3/4”
20 x 20 x 19mm
Angleflex™ is the most sophisticated injection molded
directional louver available. This louver is designed for those
special applications that require highly restricted distribution
in one direction, the majority of distribution in the opposite
direction and 45 degree cut-off in the perpendicular plane. By
combining angled and parabolic blades, Angleflex can provide
the highest levels of efficiency and lighting control. This panel
has been specifically designed to adapt to the dimensional
requirements of the world‘s major ceiling modules.
.74”
18,8mm
.80”
20,3mm
ANGLEFLEX™
CEILING STYLE
STYRENE
SILVER PERMALUX
.80”
20,3mm
2X4
24-7/16” x 47-3/4”
620 x 1213mm
2X2
24-7/16” x 23-3/4”
620 x 606mm
1X4
11-3/4” X 47-11/16”
298 x 1213mm
AF-24-P
AF-22-P
AF-14-P
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
IL-1
IL-6
FULLERFLEX™ 20 x 20 x 18mm
WIDERFLEX™
20 x 20 x 15mm
METRIC SIZE PANELS:
LOW GLARE PARABOLIC LOUVERS
The IL louvers are undoubtedly the most widely accepted
parabolic louvers available. These European louvers, now
manufactured in North America are a world class product that
conforms to almost all ceiling modules. These two louvers
provide the opportunity to retain design continuity throughout an
installation while customizing the lighting to optimize the visual
task.
IL-1: FULLERFLEX™
18mm,.71”
IL-6: WIDERFLEX™
20mm
.78"
15mm, .59”
20mm
.78"
*IL-1
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
*602 X 1260MM
23-13/32” X 49-39/64”
*IL-1-M6
*IL-1-M6-P
*IL-1-M6-AL
*IL-1-M6-G
*IL-6
CEILING STYLE
STYRENE
SPECULAR SILVER
SILVER PERMALUX
ALUMA-LUX
SPECULAR GOLD
602 X 1260MM
23-13/32” X 49-39/64”
*IL-6-M6
*IL-6-M6-P
*IL-6-M6-AL
*IL-6-M6-G
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
HC
HI-CELL™
OPTICS FOR T5
OPTICS FOR T5
TRIMMABLE LENGTH FOR CUSTOM FIT
2’ AND 4’ LENGTHS
Build your luminaires around the
most advanced optics available.
Nominal
Maximum length
Minimum length
600mm
608mm
545mm
2’
23.92”
21.46”
1200mm
1215mm
1153mm
4’
47.84”
45.37”
• Reduced product development time.
• Reduced tooling investment.
• Reduced inventory investment.
• Reduced scrap expense.
• Bring product to market faster.
• Increase sales opportunities.
SLP is an international organization that has achieved the fine balance of
craftsmanship and state of the art technology that fosters the ability to produce
innovative new products. By developing synergies with respected designers SLP
is able to introduce exciting new products that meet the demanding needs of a
world market. HI-CELL™ brings to market the benefits valued by manufacturers,
the efficiency demanded by an energy hungry world and the luminance control
that is required for a healthy visual environment.
Suitable for:
Direct
Direct / Indirect
Surface Mount
Pendant hung
Cable hung
luminaires.
2.19”
56mm
lamp center at 1.7”/43mm
for maximum downlight
3.75”
95mm
FINISH
ACRYLIC
2’ / 600mm
4’ / 1200mm
WT/CTN
Specular Permalux
HCT5-A-600-P
HCT5-A-1200-P
26lbs/ 11.79kg
ALUMA-LUX (Semi-Specular)
HCT5-A-600-AL
HCT5-A-1200-AL
26lbs/ 11.79kg
White
HCT5-A-600-W
HCT5-A-1200-W
26lbs/ 11.79kg
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
HI-CELL™
FIXTURE KIT LED
HC
FIXTURE KIT LED
Hi-Cell Fixture Kit for LED
Features & Benefits
• Single Row LED
• For Use with Typical 1.60” LED boards
• 2’ or 4’ lengths
• Frosted lens hides glare from LEDs
• Customized clips hold Hi-Cell Louver for easy installation
• Steel Troffer housing
• Louver is available in Multiple finishes
- Specular
- Aluma-Lux (Semi-Specular)
- White Acrylic
Applications
• LED for T-Bar Ceilings
• Recessed Luminaire
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
HC
HI-CELL™
FIXTURE KIT LED
FIXTURE KIT LED
Parts Guides
2’ Assembly
SK-RL01-G524-BOD
CT-SCRW
Item
Material
PCS Required
Per Assembly
ITEM No.
HOUSING
CRS-Prefinished
White
1
SK-RL01-G524-BOD
ENDCAP
CRS-Prefinished
White
2
SK-RL01-G5-BEC
BOARDTRAY
CRS: MIN 87%
REFLECTANCE
1
SK-RL01-G524-BT-1R1.60
DIFFUSER
ACRYLIC
1
SK-RL01-G524-BLD1
LOUVER
ACRYLIC
Available Finishes:
Permalux, Alumalux,
White
1
HCT5-A-600-P-2C /
HCT5-A-600-AL-2C /
HCT5-A-600-W-2C
LOUVER
RETAINER CLIPS
ZINC PLATED STEEL
4
SK-LC1
BOARD TRAY
RETAINER CLIPS
METAL WHITE
4
CT-LED-BRC-SM-S
WIRE ACCESS
PLATE
GALVANIZED STEEL
1
SK-AP-2X4
SK-RL01-G5-BEC
SK-AP-2X4
R.PR10101955
SK-RL01-G524-BT-1R1.60
CT-SCRW
CT-LED-BRC-SM-S
SK-RL01-G524-BLD1
SK-LC1
HCT5-A-600-_-2C
(Replace underscore
with P, AL, or W for
desired finish)
4’ Assembly
6
CT-SCRW
4
R.PR10101955
Item
Material
PCS Required
Per Assembly
ITEM No.
HOUSING
CRS-Prefinished
White
1
SK-RL01-G548-BOD
ENDCAP
CRS-Prefinished
White
2
SK-RL01-G5-BEC
BOARDTRAY
CRS: MIN 87%
REFLECTANCE
1
SK-RL01-G548-BT-1R1.60
DIFFUSER
ACRYLIC
1
SK-RL01-G548-BLD1
LOUVER
ACRYLIC
Available Finishes:
Permalux, Alumalux,
White
1
HCT5-A-1200-P-2C /
HCT5-A-1200-AL-2C /
HCT5-A-1200-W-2C
END LOUVER
RETAINER CLIPS
ZINC PLATED
STEEL
4
SK-LC1
CENTER LOUVER
RETAINER CLIPS
ZINC PLATED
STEEL (NO FEET)
2
SK- LC1-NF
HCT5-A-1200-_-2C
(Replace underscore
with P, AL, or W for
desired finish)
BOARD TRAY
RETAINER CLIPS
METAL WHITE
8
CT-LED-BRC-SM-S
WIRE ACCESS
PLATE
GALVANIZED STEEL
1
SK-AP-2X4
SK-RL01-G5-BEC
CT-SCRW
SCREWS
ENDCAP RIVITS
SK-RL01-G548-BOD
SK-AP-2X4
R.PR10101955
SK-RL01-G548-BT-1R1.60
CT-LED-BRC-SM-S
SK-RL01-G548-BLD1
CT-SCRW
SK-LC1
SK-LC1-NF
SCREWS
6
CT-SCRW
ENDCAP RIVITS
4
R.PR10101955
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
EGGCRATE LOUVERS
TC
TC500
T3060
T
METRIC EGGCRATES
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
TC
1/2”
13mm
THINCELL™
1/2”
14mm
PLASTIC CUBE LOUVERS
.375”
9,5mm
ECONOMY EGGCRATE
NOMINAL
5/8” X 5/8” X 3/8”
.50”
14mm
16 x 16 x 7,6mm
SLP‘s Thincell™ TC is an injection molded cube louver that
offers unequalled efficiency, economy and dimensional
versatility. Standard finished include opaque white, black
and specular silver. TC is molded in both 2’ x 4‘ and metric
panel sizes. The nominal 3/8” (7,6mm) thickness offers
an important freight advantage when cube and container
capacity is an issue. All molded sizes include a half lap
perimeter detail that facilitates continuous row applications
with an unbroken appearance.
BLACK
.375”
9,5mm
.55”
14mm
3/8”
9,5mm
1/2”
14mm
CHROME
5/16
8mm
5/8”
16mm
.300”
7,6mm
.625”
16mm
THINCELL™
SMALL CELL EGGCRATE
STYRENE
WHITE
CHROME
SPECULAR GOLD
BLACK
ACRYLIC
WHITE
5/16”
8mm
2X4
23-5/8” x 47-5/8”
600mm x 1210mm
2X2
5/8”
23-5/8”16mm
x 23-3/4”
600mm x 603mm
1X4
11-3/4” x 47-5/8”
295mm x 1210mm
TC-24
TC-24-CH
TC-24-G
TC-24-B
TC-22
TC-22-CH
TC-22-G
TC-22-B
TC-14
TC-14-CH
TC-14-G
TC-14-B
30 PCS/CTN:34LBS/ 15.5kg
TC-A-24
TC-A-22
TC-A-14
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
TC500
THINCELL™
ALC Type 24, 26 Eggcrate
SMALL CELL EGGCRATE
NOMINAL 1/2” X 1/2” X 3/8"
ACTUAL: 13 x 13 x 7,6mm
BLACK & ACRYLIC: 13 x 13 x 9,5mm
SLP‘s Thincell™ TC500 is an injection molded cube louver
that has the traditional half inch cell size but with a reduced
thickness to provide the economy everyone is looking for.
Standard material is white styrene. TC500 is molded as a 2’x4‘
and is available in lesser nominal sizes.
The .312” (7,9mm) thickness offers an important freight
advantage when cube and container capacity is an issue. All
full size parts include a half lap perimeter detail that facilitates
continuous row applications with an unbroken appearance.
.312”
7,9mm
*TC500 Black and Acrylic
.374”
9,5mm
1/2”
13mm
*THINCELL™
SMALL CELL EGGCRATE
STYRENE
WHITE
CHROME
BLACK
ACRYLIC
WHITE
2X4
23-5/8” x 47-5/8”
600mm x 1210mm
2X2
23-5/8” x 23-5/8”
600mm x 600mm
1X4
11-3/4” x 47-5/8”
295mm x 1209mm
*TC500-24
*TC500-24-CH
*TC500-22
*TC500-22-CH
*TC500-14
*TC500-14-CH
*TC500-24-B
*TC500-22-B
*TC500-14-B
*TC500-A-24
*TC500-A-22
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
T3060
THINCELL™
ALC Type 23 Eggcrate
OVERSIZED EGGCRATE
11/16” X 11/16” X 9/16”
17,4 x 17,4 x 14,3mm
T3060 Eggcrate is slightly larger cell size (11/16” x
11/16” x 9/16”) than standard 1/2” Eggcrate Louvers.
•
Shiplap perimeter
*for continuous row applications
Used in lighting, awnings, HVAC, displays and many
other application. Perfect for vanity applications where
the extra length is required.
*It is recommended that the 5’ sides always be
supported in continuous row applications.
9/16”
14,3mm
11/16”
17,4mm
THINCELL™
OVERSIZED EGGCRATE
STYRENE
2.5 X 5
29-3/4” x 59-3/4”
756mm x 1518mm
T-3060
WHITE
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
T
THINCELL™
ALC Type 10, 20, 30 Eggcrate
FULL 1/2” EGGCRATE
2X4 AND 3X4
1/2” X 1/2” X 1/2”
14 x 14 x 12,7mm
Thincell 1/2” (13mm) cube plastic louvers are accepted
as the worldwide standard. Thincell provides efficiency,
economy and moderately controlled luminances. These
panels feature half lap perimeter detailing to facilitate
an unbroken appearance when parts are butt joined in
continuous row application.
1
1
1/2”
14mm
.50”
12,7mm
.55”
14mm
1/2”
13mm
1/2”
14mm
THINCELL™
FULL 1/2” EGGCRATE
STYRENE
2X2
23-5/8” X 23-3/4”
600 x 603mm
1X4
11-3/4” X 47-5/8”
295 x 1210mm
T-24
WHITE
ACRYLIC
WHITE
2X4
23-5/8” x 47-5/8”
600 x 1210mm
TA-24
T-22
3X4
35-5/8” x 47-11/16”
905 x 1212mm
.50”
1014mm
PCS/CTN: 60 LBS / 27.21 kg
T-14
T-34
TA-22
.375”
9,5mm
.55”
14mm
3/8”
9,5mm
1/2”
14mm
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
.3
9
ME
THINCELL™
1/2”
13mm
ALC Type 29 Eggcrate
1/2”
14mm
.50”
12,7mm
METRIC EGGCRATES
.55”
14mm
German Eggcrates are specially molded.
1/2”
13mm
1/2”
14mm
1/2”
13mm
Cells of the T3-M6 are not perfectly square as they
approach the perimeter of the eggcrate.
T3-M6
Cell Size: 1/2” X 1/2” X 3/8”
Panel Size: 24-5/16” x 49”
.50”
12,7mm
1/2”
14mm
.55”
14mm
.375”
9,5mm
1/2”
13mm
14 x 14 x 9,5mm
618 x 1243 mm
.50”
14mm
1/2”
14mm
.375”
9,5mm
.375”
9,5mm
.55”
14mm
*T3-M6
METRIC EGGCRATE
STYRENE
618 X 1243mm
24-5/16” x 49”
*T3-M6
WHITE
PSC./CTN
.50”
3/8”
14mm
9,5mm
1/2”
14mm
WT/CTN
.375”
9,5mm
.55”
14mm
15
5/16”
8mm
5/8”
16mm
3/8”
9,5mm
1/2”
14mm
.300”
7,6mm
.625”
5/16
8mm
16mm
TC-M5
Cell Size: Nominal 5/8” X 5/8” X 3/8”
16 x 16 x 7,6mm
Panel Size: 23-1/4” x 47”
595 x 1195 mm
5/8”
5/16”
8mm
5/8”
16mm
16mm
.300”
7,6mm
.625”
16mm
*TC-M5
METRIC EGGCRATE
STYRENE
WHITE
595 X 1195mm
23-1/4” x 47”
*TC-M5
PSC./CTN
WT/CTN
5/16”
8mm
5/8”
16mm
15
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
ALUMINUM LOUVERS,
BAFFLES & RETROFIT KITS
L14
LB14
ATTB
AT
RFK2
RFK3
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
L14
PARABOLIC
ALUMINUM LOUVER
1.4”/35mm DEEP:
TRIMMABLE FLANGES
Lumiflux™ L14 is the industry standard 1.4” (35mm) deep
parabolic aluminum louver. It is available from stock
with a trimmable flange that provides a wide range of
finished sizes. L14 is designed to fit most luminaires and
is available in the cell configurations that satisfy typical
applications. L14 louvers are regularly manufactured with
special perimeter details to adapt to other requirements.
1.4”
35mm
Number of Cells
Nominal cell Size
18
78
105
6.50”
165.1mm
3.25”
82.55mm
2.75”
69.85mm
2X4
ID=19.25” X 43.25”
OD=22.50” X 46.50”
603 X 1881mm
NUMBER OF CELLS
CELL CONFIGURATION
FINISH
18
78
105
3X6
6X13
7X15
LI SEMI-SPECULAR
LI SEMI-SPECULAR
LI SEMI-SPECULAR
PART NUMBER
PCS/CTN
L14-24-18-LC
L14-24-78-LC
L14-24-105-LC
10
10
10
NUMBER OF CELLS
CELL CONFIGURATION
FINISH
9
36
49
3X3
6X6
7X7
LI SEMI-SPECULAR
LI SEMI-SPECULAR
LI SEMI-SPECULAR
PART NUMBER
PCS/CTN
L14-22-9-LC
L14-22-36-LC
L14-22-49-LC
20
20
20
2X2
ID=19.25” X 19.25
OD=22.50” X 22.50”
572 X 572mm
*ALL PARTS NOT LISTED WILL BE MADE TO ORDER AND SET UP CHARGES MAY APPLY.
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
PARABOLIC
ALUMINUM BAFFLE
LB14
1.4” DEEP WITH TRIMMABLE WIDTH
LB14 parabolic aluminum baffles are available as
highly adaptable stock parts or can be manufactured to
meet specific requirements. Stock parts feature cross blades
either 2” (51mm) or 3” (76mm) on center and trimmable
flanges that facilitate immediate shipment of parts meeting
almost any dimensional requirement. These nonflammable
aluminum baffles are 1.4” (35mm) deep to assure maximum
luminance control. Each 4’ part begins and ends with a half
cell (1” or 1-1/2”) so that the baffles can be butted end to end
for a continuous appearance.
Cross Blades: 2" or 3" on center.
Four different
body sizes.
Range: 5" to 13-3/4"
(Achieved by trimming the flanges)
LUMIFLUX™: LB14 BAFFLES
1.4” DEEP PARABOLIC ALUMINUM BAFFLES
DIMENSIONAL SIZE MINIMUM TRIM SIZE
FINISH
BLADE CENTERS
PART #
CTN. QT.
2”
3”
2”
3”
2”
3”
3”
LB14-082-LC
LB14-083-LC
LB14-102-LC
LB14-103-LC
LB14-122-LC
LB14-123-LC
LB14-143-LC
30
30
20
20
20
20
16
7-3/4” X 48”
5” X 48”
LI SEMI-SPECULAR
9-3/4” X 48”
7” X 48”
LI SEMI-SPECULAR
11-3/4” X 48”
9” X 48”
LI SEMI-SPECULAR
13-3/4” X 48”
11” X 48”
LI SEMI-SPECULAR
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
ATTB
THINCELL™
STRAIGHT BLADE BAFFLE
1” DEEP X 1” O.C. WITH TRIMMABLE WIDTH
The elemental simplicity of Aluminum Thincell™ Straight Blade baffles
compliments the widest range of interior decors. The crisp 45° cut-off
of the stock parts provides uniform shielding from the light source while
maintaining a visual warmth not associated with parabolics. Stock parts
are finished with white enamel paint, have cross blades 1” (25mm) deep,
1” (25mm) on center and are available in trimmable widths. ATTB‘s
straightness and rigidity are assured by the formed side details. Custom
widths, blade centers and side details are available for luminaries and
ceiling applications.
1" 25mm
VARIABLE
THINCELL™ BAFFLES
1” DEEP STRAIGHT BLADE ALUMINUM BAFFLES
DIMENSIONAL SIZE
MINIMUM TRIM SIZE
FINISH
BLADE CENTERS
PART #
PCS/CTN
7” X 48”
9” X 48”
11” X 48”
13” X 48”
5-1/8” X 48”
7-1/8” X 48”
9-1/8” X 48”
11-1/8” X 48”
WHITE ENAMEL
WHITE ENAMEL
WHITE ENAMEL
WHITE ENAMEL
1”
1”
1”
1”
ATTB1-07-W
ATTB1-09-W
ATTB1-11-W
ATTB1-13-W
52
39
26
26
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
AT
THINCELL™
ALUMINUM CUBE LOUVERS
1” X 1” X 1”
25 x 25 x 25mm
1/2” X 1/2” X 1/2”
13 x 13 x 13mm
Thincell™ Aluminum louvers offer a simple means of achieving
a desired cut-off while maintaining compliance with strict fire
codes. Stock parts are available with cell sizes of
1/2” x 1/2” x 1/2” (13 x 13 x 13mm) and 1” x 1” x 1”
(25 x 25 x 25mm) each of which provide 45 degree cut-off
and are available in a number of finishes and panel sizes. Cell
.50”up to
configurations from 1/2” x 1/2” x1” (13 x 13 x 25mm)
12,7mm
3” x 3” x 3” (76 x 76 x 76mm) are also available to meet special
lighting and ceiling requirements. Luminances are not suited for
computer VDT intensive areas.
.50”
12,7mm
1”
25,4mm
ALUMINUM
THINCELL™
HALF INCH CUBE
WHITE ENAMEL
MILL FINISH
CLEAR ANODIZED
BLACK
ONE INCH CUBE
WHITE ENAMEL
CLEAR ANODIZED
1”
25,4mm
2X4
23-5/8” x 47-5/8”
600 x 1210mm
2X2
23-5/8” x 23-3/4”
600 x 603mm
1X4
11-3/4” x 47-5/8”
295 x 1210mm
1X2
11-3/4” x 23-3/4”
295 x 603mm
AT-24-W
AT-22-W
AT-14-W
AT-12
AT-24-M
AT-22-M
AT-14-M
AT-24-C
AT-22-C
AT-14-C
AT-24-B
AT-22-B
AT-14-B
AT1-24-W
AT1-22-W
AT1-14-W
AT1-24-C
AT1-22-C
AT1-14-C
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
RFK2
STEEL
RETROFIT KITS
ACCEPTS YOUR CHOICE OF DIFFUSERS
The RFK2 retrofit kit exemplifies both simplicity and
function. The sturdy steel frame is installed onto a
standard inverted tee system, the luminaire returned to
its original position but now on top of the frame and the
door containing your choice of light control media can
then be installed. The door is supported by integral pin
hinges and is fastened with cam latches. The majority
of louvers and all lenses can easily be adapted to fit
the door. RFK2 is an easy choice for areas that contain
missing, damaged and mismatched luminaire door
frames.
RFK2
RETROFIT FRAME
STEEL
2X4
23-3/4” X 47-3/4”
ID: 22-1/2” X 46-1/2”
603 X 1213mm
2X2
23-3/4” X 23-3/4”
ID: 22-1/2” X 22-1/2”
603 x 603mm
6 PCS/CTN 32 LBS
WHITE ENAMEL
12 PCS/CTN: 47 LBS
RFK2-24
Stock Parts that fit without cutting:
• PR12-24-100x
• PR12-24-110x
• PR12-24-125x
1X4
11-3/4” X 47-3/4”
ID: 11-3/4” X 46-1/2”
298 x 1213mm
12 PCS/CTN: 47 LBS
RFK2-22
•
•
•
P1-24-4x
P2-24-4x
P3-24-4
RFK2-14
•
•
P5-24-4
P1-24-4x-ESP
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
RFK3
DEEP CELL
RETROFIT KITS
DIFFERENT CELL CONFIGURATIONS
FOR DIFFERENT LIGHTING
REQUIREMENTS
RFK3 is a series of highly versatile nominal 3” deep
parabolic aluminum retrofit kits. These assemblies
are designed to be installed between an existing
luminaire and the inverted tee bar ceiling system. The
wide variety of cell configurations that are available
assure the optimum blade spacing, cut-off and
efficiency for each application.
RFK3 raises the fixture 2.58” up into the plenum area.
NUMBER OF CELLS
18
2X4
23-3/4” X 47-3/4” CELL CONFIGURATION 3X6
603 X 1213mm
FINISH
24
32
3X8
4X8
LI SEMI-SPECULAR LI SEMI-SPECULAR LI SEMI-SPECULAR
LATCHES
SPRING LOADED
SPRING LOADED
SPRING LOADED
PART NUMBER
RFK3-24-18-LC-SL
RFK3-24-24-LC-SL
RFK3-24-32-LC-SL
PCT/CTN
5
5
5
NUMBER OF CELLS
9
2X2
23-3/4” X 23-3/4” CELL CONFIGURATION 3X3
603 X 603mm
16
4X4
FINISH
LI SEMI-SPECULAR LI SEMI-SPECULAR
LATCHES
SPRING LOADED
SPRING LOADED
PART NUMBER
RFK3-22-9-LC-SL
RFK3-22-16-LC-SL
PCT/CTN
10
10
*ALL PARTS NOT LISTED WILL BE MADE TO ORDER AND SET UP CHARGES MAY APPLY
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
ALUMINUM & KNOCKDOWN
L30
L30 KD
L14 KD
KNOCK DOWN
HARDWARE
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
L30
PARABOLIC
ALUMINUM LOUVER
NOMINAL 3” DEEP TO FIT ASSEMBLER’S HOUSINGS
Lumiflux™ 30 is a highly versatile nominal
3”/76,2mm parabolic aluminum louver
that is suited to ceiling and luminaire
applications. The precisely formed blades
direct the light to the zones where it is most
needed. Variable configurations and blade
spacing offer the optimum light control for each
installation. This large scale louver is available in
sizes up to 63” (1600mm) square when flanged.
Stock parts are designed for specific fixture housings.
These parts are available in a semi-specular anodized
or high reflective white finish and also feature spring
loaded latches for secure installation.
PART NUMBER:
L30-AG-22-9-LC-SL
L30-AG-22-16-LC-SL
L30-AG-24-12-LC-SL
L30-AG-24-18-LC-SL
L30-AG-24-32-LC-SL
NOMINAL TOTAL NUMBER
SIZE
OF CELLS
2X2
2X2
2X4
2X4
2X4
NUMBER OF
CELLS: WIDTH
NUMBER OF
CELLS: LENGTH
CARTON
QUANTITIES
3
4
2
3
4
3
4
6
6
8
62
62
32
32
32
9
16
12
18
32
Unassembled (KD) parts are available.
Parts for other fixture manufacturers are available.
Please contact SLP for details.
Finishes: Semi-specular Anodized and High Reflective White
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
PARABOLIC
ALUMINUM LOUVER
L30-KD
Lumiflux™ 30 is a highly versatile nominal 3”/76,2mm parabolic aluminum louver that is suited to ceiling
and luminaire applications. The precisely formed blades direct the light to the zones where it is most needed.
Variable configurations and blade spacing offer the optimum light control for each installation. This large scale
louver is available in sizes up to 63” (1600mm)
square when flanged.
These parts are available in a Specular and
Semi-specular anodized or high reflective White
finish.
Component parts include:
• Cross Blades
• Longitudinal Blades
• Hinges
• Flanges
• Latches
• Latch Flanges
NOMINAL TOTAL NUMBER NUMBER OF CELLS: NUMBER OF CELLS:
SIZE
OF CELLS
WIDTH
LENGTH
2X2
2X2
2X4
2X4
2X4
9
16
12
18
32
3
4
2
3
4
3
4
6
6
8
Parts for other fixture manufacturers are available. Please contact SLP for details.
ALL PARTS LISTED ARE MADE TO ORDER AND SET UP CHARGES MAY APPLY
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
PARABOLIC
ALUMINUM LOUVER
L14-KD
1.4”/35mm DEEP:
Lumiflux™14 is the industry standard 1.4” (35mm) deep parabolic aluminum louver. It is available with a trimmable
flange that provides a wide range of finished sizes. L14 is designed to fit most luminaires and is available in the
cell configurations that satisfy typical applications. L14-KD components 1
are available in multiple configurations.
Component parts include:
• Cross Blades
• Longitudinal Blades
• Flanges
2X4
22-1/2” X 46-1/2”
603 X 1881mm
2X2
22-1/2” X 22-1/2”
572 X 572mm
18
NUMBER OF CELLS
CELL CONFIGURATION 3X6
FINISH
L14-24-18-LC-KD
PART NUMBER
9
NUMBER OF CELLS
FINISH
L14-22-9-LC-KD
PART NUMBER
32
78
105
4X8
6X13
7X15
SEMI-SPECULAR
L14-24-32-LC-KD
L14-24-78-LC-KD
16
36
4X4
6X6
SEMI-SPECULAR
L14-22-16-LC-KD
L14-22-36-LC-KD
1X4
11-1/4” X 46-1/2”
286 X 1881mm
16
24
26
NUMBER OF CELLS
3X8
2X13
SEMI-SPECULAR
FINISH
L14-14-16-LC-KD L14-14-24-LC-KD
L14-14-26-LC-KD
PART NUMBER
1X2
11-1/4” X 22-1/2”
286 X 572mm
8
NUMBER OF CELLS
SEMI-SPECULAR
FINISH
L14-12-8-LC-KD
PART NUMBER
2
3
L14-24-105-LC
4
5
ALL PARTS LISTED ARE MADE TO ORDER AND SET UP CHARGES MAY APPLY
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
KDH
KNOCK DOWN
HARDWARE
Latches
Spring Latch:
Opposing Cam Latch:
Available in Black
Anodized or White
Hinges
Hinge:
Available in Black
Anodized or White
Available in Silver or white
Springs
Close Space Hinge:
Left Spring
Springs for L30
Louvers: With a right
Only available in
Silver. For applications
with no reveal
hand spring and a left
hand spring the latches
work more freely.
Right Spring
Rivets
Rivet for Cam
Pop Rivet for Hinges and Wraparound Tab:
Rivet for Spring Latch
Available in Silver or Black
PART
SPRING LATCH
CAM LATCH
HINGE
SPRINGS
RIVETS
PART NUMBER
FINISH
DESCRIPTION
PCS/CTN
R.LA10205090
BLACK
LEFT HAND
5000
R.LAM2503
BLACK
RIGHT HAND
5000
R.LA10205091
WHITE
LEFT HAND
R.LA10205092
WHITE
RIGHT HAND
R.LA10205060LH
SILVER
LEFT HAND
4000
R.LA10205060RH
SILVER
RIGHT HAND
4000
R.LA10205102LH
WHITE
LEFT HAND
4000
R.LA10205102RH
WHITE
RIGHT HAND
4000
R.HG10205040
BLACK
RFK3
2300
R.HG10205060
SILVER
NO REVEAL
3500
R.HG10205100
WHITE
RFK3
2000
R.HG7001829
BLACK
R.SP10205080
SILVER
RIGHT HAND
31,400
R.SP10205090
SILVER
LEFT HAND
31,400
R.PR10101560
SILVER
CAM LATCH
1000
R.PR10101953
BLACK
HINGE/WRAP TAB
10,000
R.PR10101954
SILVER
HINGE/WRAP TAB
10,000
R.PR11105010
SILVER
SPRING LATCH
7000
CTN. WT
3000
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
FLAT SHEET & LENSES
EXTRUDED SHEET
MIRROR PANELS
PATTERN 12
PATTERN 15
PATTERN 19
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
ES
EXTRUDED SHEET
OVERLAYS AND CRACKED ICE PANELS
RANDOM PATTERNS
CRACKED ICE
ACRYLIC SHEET
ACRYLIC SHEET
WHITE ACRYLIC
NOMINAL SIZE
DIMENSIONAL SIZE
2X4
23-3/4” X 47-3/4”
THICKNESS
PART #
PCS/CTN.
.040” / 1mm
WH81-24-040
30
.080” / 2mm
WH81-24-080
15
CTN. WT.
68
68
30
23-3/4” X 23-3/4”
2X2
11-3/4” X 47-3/4”
1X4
.040” / 1mm
WH81-22-040
60
68
.080” / 2mm
WH81-22-080
30
68
.040” / 1mm
WH81-14-040
60
68
.080” / 2mm
WH81-14-080
30
68
CLEAR ACRYLIC
2X4
23-3/4” X 47-3/4”
.040” / 1mm
CRT83-24-040
30
68
2X2
23-3/4” X 23-3/4”
.040” / 1mm
CRT83-22-040
60
68
1X4
11-3/4” X 47-3/4”
.040” / 1mm
CRT83-14-040
60
68
CRACKED ICE
STYRENE
NOMINAL SIZE
CLEAR
WHITE
DIMENSIONAL SIZE
THICKNESS
PART #
PCS/CTN.
23-3/4” X 47-3/4”
.065” / 1,7mm
CI-24-065
25
23-3/4” X 47-3/4”
.065” / 1,7mm
CIW-24-065
25
CTN. WT.
50
50
30
CLEAR
WHITE
CLEAR
CI-50100-065
50
50” X 100”
.065” / 1,7mm
24” X 52”
.065” / 1,7mm
CI-2452-065
25” X 50”
.070” / 1,8mm
CI-2550-070
20
36” X 60”
.070” / 1,8mm
CIW-3660-070
100
50” X 100”
.125” / 3,2mm
CI-50100-125
50
Thickness tolerance +0/-0.010”
on all SLP Flat Sheet
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
M
MIRROR PANELS
.125 ACRYLIC MIRRORED CEILING PANELS
PANEL SIZES
2X4: 23-3/4” X 47-3/4”
2X2: 23-3/4 X 23-3/4
Film mask on face side to protect mirror from
scratches during handling and fabrication
MIRROR PANELS
CLEAR ACRYLIC
NOMINAL SIZE
DIMENSIONAL SIZE
THICKNESS
PART #
PCS/CTN.
CTN. WT.
2X4
23-3/4” X 47-3/4”
.125” / 3,2mm
MR-24
10
62
2X2
23-3/4” X 23-3/4”
.125” / 3,2mm
MR-22
20
60
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
PR12
PATTERN 12
EXTRUDED LENS
3/16” - 4,7mm FEMALE PRISM
Prismatic Pattern 12 is undoubtedly the most widely recognized
lighting medium available. This extruded lens features .187” (4,7mm)
female prisms that offer excellent efficiencies while maintaining
87% of the light output in the 0-60 degree zone. PR12 is available in
numerous thicknesses, materials and panel sizes.
Three Standard Thicknesses:
.100”/2,5mm
.110”/2,8mm
.125”/3,2mm
PATTERN 12 PRISMATIC LENS
3/16” (4,7mm) CONICAL FEMALE PRISM
CLEAR ACRYLIC
NOMINAL SIZE
DIMENSIONAL SIZE
2X4
23-3/4” X 47-3/4”
1X4
4X8
PART #
PCS/CTN.
CTN. WT.
PR12-24-100
20
40LBS/18,1KG
.110” / 2,8mm
PR12-24-110
20
69LBS/31,3KG
.125” / 3,2mm
PR12-24-125
25
81LBS/36,7KG
.100” / 2,5mm
PR12-24-100X
20
38LBS/17,2KG
.110” / 2,8mm
PR12-24-110X
30
67LBS/30,4KG
.125” / 3,2mm
PR12-24-125X
25
78LBS/35,4KG
.100” / 2,5mm
PR12-22-100
40
40LBS/18,1KG
.110” / 2,8mm
PR12-22-110
60
69LBS/31,3KG
.125” / 3,2mm
PR12-22-125
50
81LBS/36,7KG
.100” / 2,5mm
PR12-14-100
40
40LBS/18,1KG
.110” / 2,8mm
PR12-14-110
60
69LBS/31,3KG
.125” / 3,2mm
PR12-14-125
50
81LBS/36,7KG
50” X 100”
.125” / 3,2mm
PR12-50100-125
50
50” X 59-1/2”
.125” / 3,2mm
PR12-5059.5-125
50
22-1/2 X 46-1/2
2X2
THICKNESS
.100” / 2,5mm
23-3/4 X 23-3/4
11-3/4” X 47-3/4”
STYRENE
CLEAR
23-3/4” X 47-3/4”
.095” / 2,4mm
PRS12-24-100
20
40LBS/18,1KG
WHITE
23-3/4” X 47-3/4”
.095” / 2,4mm
PRSW12-24-100
20
40LBS/18,1KG
POLYCARBONATE
2X2
23-3/4” X 23-3/4”
.135” / 3,4mm
PR12-PC-22-135
1X4
11-3/4” X 47-3/4”
.135” / 3,4mm
PR12-PC-14-135
4X8
48” X 96”
.135” / 3,4mm
PR12-PC-4896-118
SPECIAL ORDER
Thickness tolerance +0/-0.010” on all SLP Flat Sheet
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
PR15
PATTERN 15
EXTRUDED LENS
3/8” - 9,5mm FEMALE PRISM
SLP‘s extruded Prismatic Pattern 15 is designed specifically
to span large openings without any objectionable sag. The
3/8” (9,5mm) square based female prisms not only provide
structural rigidity but also offer an orderly appearance. PR15
is the only lens for large openings that offers high efficiencies,
controlled luminance and rigidity. With a light transmission of
approx. 83%. The prisms are oriented perpendicular to the
width and length. Parts with a diagonal prism orientation are
available on request. Please contact factory for availability.
.200
4,8mm
3/8” (9,5mm) CONICAL FEMALE PRISM
CLEAR ACRYLIC
NOMINAL SIZE
DIMENSIONAL SIZE
2X4
23-3/4” X 47-3/4”
.200” / 4,8mm
THICKNESS
PR15-24-200
10
2X2
23-3/4” X 23-3/4”
.200” / 4,8mm
PR15-22-200
20
1X4
11-3/4” X 47-3/4”
.200” / 4,8mm
PR15-14-200
20
PR15-5051-200
BULK*
50” X 51”
.200” / 4,8mm
4X4
* REQUIRES SPECIAL PACKING
PART #
PCS/CTN.
CTN. WT.
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
PR19
PATTERN 19
EXTRUDED LENS
3/16” - 4,7mm MALE PRISM
SLP‘s extruded Prismatic Pattern 19 lens offers the light
control of an injection molded lens at a fraction of the cost.
The 3/16” (4,7mm) square based male prisms suppresses
luminance at critical angles and delivers 92% of the light
output to the 0-60 degree zone. PR19 is one of the best
alternatives when brightness control is a consideration but
parabolic louvers are not required.
.156”
4mm
3/16” (4,7mm) CONICAL MALE PRISM
CLEAR ACRYLIC
NOMINAL SIZE
DIMENSIONAL SIZE
THICKNESS
PART #
PCS/CTN.
CTN. WT.
2X4
23-3/4” X 47-3/4”
.156” / 4,0mm
PR19-24-156
10
NA
2X2
23-3/4” X 23-3/4”
.156” / 4,0mm
PR19-22-156
20
NA
1X4
11-3/4” X 47-3/4”
.156” / 4,0mm
PR19-14-156
20
.187” / 4,7mm
PRW19-2550-187
20
NA
50” X 50”
.187” / 4,7mm
4X4
* REQUIRES SPECIAL PACKING
PRW19-5050-187
BULK*
NA
WHITE ACRYLIC
2X4
25' X 50'
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
INJECTION MOLDED LENSES,
WRAPS & SAFETY TUBES
INJECTION MOLDED
WRAPAROUNDS
WRAPAROUNDS
DROP LENS
VP60 LENS
SAFETY TUBE GUARDS
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
INJECTION MOLDED
WRAPAROUND LENS
WIM
ALC Wraparound
with Endcaps
INJECTION MOLDED
Specification grade injection molded wraparounds designed
specifically for applications that require optimum optical control
with low brightness. Ideal for public areas such as schools, airports,
libraries, retail stores and offices. Linear side prisms control brightness
and the small conical male prisms on the bottom minimize lamp
image. This design reduces ceiling shadows and sharp contrasts.
4 Light
2 Light
2-5/8”
15-5/8”
10-5/8”
INJECTION MOLDED WRAPAROUND LENS
.175” Prism
NOMINAL SIZE
DIMENSIONAL SIZE
2 LAMP
10-5/8” x 48-5/8”
CLEAR WRAP ONLY
PART #
PCS/CTN
CTN. WT.
24
24
NA
NA
CLEAR WRAP WITH CLEAR END CAPS INSTALLED
WIM-2L
WIM-2L-CEC
CLEAR WRAP WITH WHITE END CAPS INSTALLED
WIM-2L-WEC
24
NA
CLEAR END CAPS ONLY
WIM-G83-2L-CEC
108
NA
WHITE END CAPS ONLY
WIM-G83-2L-WEC
108
NA
WIM-4L
WIM-4L-CEC
12
CLEAR WRAP WITH CLEAR END CAPS INSTALLED
12
NA
NA
CLEAR WRAP WITH WHITE END CAPS INSTALLED
WIM-4L-WEC
12
NA
CLEAR END CAPS ONLY
WIM-G83-4L-CEC
NA
WHITE END CAPS ONLY
WIM-G83-4L-WEC
NA
4 LAMP
15-5/8” x 48-5/8”
CLEAR WRAP ONLY
SPRINGS
WIM-G83-SPRING
CLIPS
WIM-G83-CLIP
BULK
SPRING AND CLIP INSTALLATION:
1. INSERT THE CLIP INTO THE ENDCAP
2. ATTACH THE ENDCAP TO THE END OF THE WRAP
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
GEN
WRAPAROUND LENS
REPLACEMENT WRAPAROUND LENSES
PART
PART
GEN4200
DIMENSIONS (INCHES)
A
B
C
1-1/2 8-7/8 7-7/8
LENGTH
FIXTURE
47-13/16 (INCHES)
KEYSTONE
DIMENSIONS
2-LIGHT
A
B
C
LENGTH
1-1/2 8-7/8
7-7/8
47-27/32
GEN4200
C
FIXTURE
KEYSTONE
2-LIGHT
A
B
PART
PART
GEN4600
DIMENSIONS (INCHES)
A
B
C LENGTH
2-5/8 5-1/4 --- 48-1/2
DIMENSIONS
(INCHES)
FIXTURE
GEN4200
METALUX BE
A
B
C
LENGTH
2-5/8 5-1/4
--48-1/2
GEN4600
FIXTURE
METALUX BE
A
B
DIMENSIONS
(INCHES)
A
B C DIMENSIONS
LENGTH FIXTURE
(INCHES)
1-3/4 8 7-1/8 47-1/4
LITHONIA SB
A
B
C
GEN4600
2-LIGHT
PART
PART
GEN5800
GEN5800
1-3/4
8
7-1/8
LENGTH
47-3/4
C
FIXTURE
LITHONIA SB
2-LIGHT
A
B
PART
PART
GEN8125
DIMENSIONS (INCHES)
FIXTURE
A
B WA C
LENGTH
LITHONIA
2-LIGHT
3-1/4
11-1/2
--47-1/4
GEN5800
DIMENSIONS (INCHES)
A B
C LENGTH
3 9-3/4 12 47-3/16
GEN8125
C
FIXTURE
LITHONIA WA
2-LIGHT
Springs and Clips for
GEN8125 and GEN8126
A
B
PART:
PART
PART
GEN8126
GEN8126
DIMENSIONS (INCHES)
(INCHES)
ADIMENSIONS
BLENGTH FIXTURE
C
LENGTH
A B
C
3 15-1/2 17-1/4 47-3/16
LITHONIA WA
3
15-1/2 4-LIGHT
17-1/4 47-3/16
GEN8125
C
G81-SPRING
G81-CLIP
FIXTURE
LITHONIA WA
4-LIGHT
A
B
GEN8126
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
SLP LIGHTING
www.slplighting.com
V07052016
GEN
WRAPAROUND LENS
PART
DIMENSIONS (INCHES)
A
B
C LENGTH
PART
(INCHES)
2-17/32DIMENSIONS
10-7/16
48-3/8
GEN8300
GEN8300
A
1-5/8
B
10-5/8
C
9
LENGTH
48-3/8
FIXTURE
--2-LIGHT
FIXTURE
--2-LIGHT
WRAP
WITH WHITE ENDCAPS
ENDCAPS INSTALLED INSTALLED
GEN8300-WEC : GEN8300GEN8300-WEC
WRAP: GEN8300
WITH
WHITE
GEN8300-CEC : GEN8300 WRAP WITH CLEAR ENDCAPS INSTALLED
GEN8300-CEC : GEN8300 WRAP WITH CLEAR PRISM ENDCAPS INSTALLED
C
A
B
PART
DIMENSIONS (INCHES)
A
B
C LENGTH
2-9/16 15-3/8
48-1/4
--PART
DIMENSIONS (INCHES)
GEN8304
GEN8304
A
1-5/8
B
15-5/8
C
14
FIXTURE
LENGTH
48-3/8
GEN8300
FIXTURE
4-LIGHT
--4-LIGHT
GEN8304-WEC : GEN8304 WRAP WITH
WHITE
ENDCAPS
INSTALLED
GEN8300-WEC
: GEN8300
WRAP WITH WHITE
ENDCAPS INSTALLED
GEN8300-CEC : GEN8300 WRAP WITH CLEAR ENDCAPS INSTALLED
GEN8304-CEC : GEN8304 WRAP WITH CLEAR PRISM ENDCAPS INSTALLED
C
A
B
Individual Endcaps Available for GEN8300 AND GEN8304
PART
GEN8304
WIM-G83-2L-CEC
WIM-G83-4L-CEC
CLEAR PRISM ENDCAP FOR GEN8300
CLEAR PRISM ENDCAP FOR GEN8304
WIM-G83-2L-WEC
WIM-G83-4L-WEC
WHITE PRISM ENDCAP FOR GEN8300
WHITE PRISM ENDCAP FOR GEN8304
Springs and Clips for GEN8300 AND GEN8304
PART
WIM-G83-SPRING: SPRING FOR GEN8300 AND GEN8304
WIM-G83-CLIP: CLIP FOR GEN8300 AND GEN8304
INSTALLATION:
1. INSERT THE CLIP INTO THE ENDCAP
2. ATTACH THE ENDCAP TO THE END OF THE WRAP
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
GEN
WRAPAROUND LENS
PART
DIMENSIONS (INCHES)
A
B
C
LENGTH
PART
DIMENSIONS (INCHES)
B C
LENGTH
FIXTURE 47-5/8
1.75 A9-7/8
7-11/16
GEN9113
GEN9113
2-1/4
10 7-11/16
47-7/8
FIXTURE
LITHONIA LB
LITHONIA LB
2-LIGHT
GEN9113-WEC : GEN9113 WRAP WITH WHITE ENDCAPS INSTALLED
2-LIGHT
GEN9113-WEC : GEN9113 WITH WHITE ENDCAPS INSTALLED
C
A
B
PART
DIMENSIONS (INCHES)
A
B
C
LENGTH
PART
DIMENSIONS (INCHES)
1.88
15-7/16 13-1/16
47-5/8FIXTURE
A B
C LENGTH
GEN9113
GEN9114
GEN9114
2
15-5/8
12-7/8
47-7/8
FIXTURE
LITHONIA LB
LITHONIA LB
4-LIGHT
GEN9114-WEC : GEN9114 WRAP WITH WHITE ENDCAPS INSTALLED
4-LIGHT
GEN9114-WEC: GEN9114 WITH WHITE ENDCAPS INSTALLED
C
A
B
Individual Endcaps Available for GEN113 and GEN9114
PART
EC-9113
EC-9114
PART
PART
GEN10108
GEN10108
WHITE ENDCAP FOR GEN9113 (2-LIGHT)
WHITE ENDCAP FOR GEN9114 (4-LIGHT)
DIMENSIONS (INCHES)
DIMENSIONS
(INCHES)
A
B
C
LENGTH
FIXTURE
A
B 47-15/16 C Metalux LENGTH
2
8-1/2
7-5/8
2
8-1/2
8 2-LIGHT47-13/16
C
GEN9114
FIXTURE
Metalux
2-LIGHT
A
B
GEN10108
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
GEN
WRAPAROUND LENS
EXTRUDED WRAPS ORDERING INFORMATION
SLP offers an extensive replacement wrap program. Wraps with or without End Caps
installed, Replacement White or Clear End Caps, Springs and Clips loose or installed.
EXTRUDED WRAPAROUND LENS
EXTRUDED WRAPS ONLY!
PART #
Custom Wraps are also
available.
PCS/CTN
WxLxD
Take measurements
Trace your existing wrap on
a sheet of paper.
Send information to your
SLP Cusomer Service
Representative.
DIMENSIONAL SIZE
GEN10108
8-1/2” x 47-13/16” x 2
80
GEN4200
8-7/8” x 47-27/32” x 1-1/2"
16
GEN4600
5-1/4” x 48-1/2” x 2-5/8"
16
GEN5800
7-1/8" x 47-3/4" x 1-3/4"
16
GEN8125
11-1/2” x 47-1/4” x 3-1/4"
6
GEN8126
15-1/2 x 47-3/16 x 3
64
GEN8300
10-7/16” x 48-3/8” x 2-17/32"
12
GEN8304
15-3/8” x 48-1/4” x 2-9/16"
8
GEN9113
9-7/8” x 47-5/8” x 1.75"
14
GEN9114
15-7/16” x 47-5/8” x 1.64"
10
EXTRUDED WRAPS WITH ENDCAPS
PART #
DESCRIPTION
GEN8300-WEC
GEN8300 WRAP WITH WHITE ENDCAPS INSTALLED
PCS/CTN
GEN8300-CEC
GEN8300 WRAP WITH CLEAR PRISM ENDCAPS INSTALLED
GEN8304-WEC
GEN8304-CEC
GEN8304 WRAP WITH CLEAR PRISM ENDCAPS INSTALLED
GEN9113-WEC
21
GEN9114-WEC
GEN9114 WITH WHITE ENDCAPS INSTALLED
12
WRAPAROUND ACCESSORIES
PART #
DESCRIPTION
PCS/CTN
WIM-G83-2L-WEC
ONLY WHITE ENDCAPS FOR GEN8300
WIM-G83-2L-CEC
ONLY CLEAR PRISM ENDCAPS FOR GEN8300
WIM-G83-4L-WEC
WIM-G83-4L-CEC
ONLY CLEAR PRISM ENDCAPS FOR GEN8304
EC-9113
EC-9114
WIM-G83-SPRING
SPRING FOR GEN8300 AND GEN8304
WIM-G83-CLIP
G81-SPRING
G81-CLIP
BULK
CLIP FOR GEN8300 AND GEN8304
SPRING FOR GEN8125
CLIP FOR GEN8125
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
VP60
VP60
Injection Molded Lens
7-1/8” x 49-15/16” x 2-1/2”
181mm x 1268,41mm x 63,5mm
Injection Molded for enclosed and gasketed
fixtures. Available with or without gaskets.
7-1/8”
181mm
6-1/16”
154mm
.380”
9,6mm
2-1/2”
63,5mm
5”
127mm
VP60 INJECTION MOLDED LENS
POLYCARBONATE
FINISH
DIMENSIONAL SIZE
PART #
PCS/CTN
CTN. WT.
WITHOUT GASKETS
CLEAR FROSTED
7-1/8” X 49-15/16” X 2-1/2”
VP-60-PC-749
10
39LBS/17.7KG
WHITE
7-1/8” X 49-15/16” X 2-1/2”
VP-60-PCW-749
10
39LBS/17.7KG
CLEAR FROSTED
7-1/8” X 49-15/16” X 2-1/2”
VP-60-PC-749-WG
10
39LBS/17.7KG
WHITE
7-1/8” X 49-15/16” X 2-1/2”
VP-60-PCW-749-WG
10
39LBS/17.7KG
WITH GASKETS
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
DL
INJECTION MOLDED
DROP LENS
ALC Injection Molded
Square Asymmetrical Lens
INJECTION MOLDED
12” X 12” x 2-1/2”
20” X 20” x 2-1/2”
Our precision injection molded drop lenses provide
maximum controlled illumination. These 12” x 12” and
20” x 20” lenses have an asymmetrical light distribution
designed specifically for service station and parking lot
applications where light trespass needs to be controlled.
2-1/2”
63,5mm
12”
304,8mm
12”
304,8mm
2-1/2”
63,5mm
20”
508mm
20”
508mm
INJECTION MOLDED DROP LENS
CLEAR ACRYLIC
NOMINAL SIZE
DIMENSIONAL SIZE
12 X 12
12” X 12” X 2-1/2”
20 X 20
PART #
PCS/CTN
CTN. WT.
DL-A-1212
20
NA
20” X 20” X 2-1/2”
DL-A-2020
5
NA
12” X 12” X 2-1/2”
DL-PC-1212
20
NA
CLEAR POLYCARBONATE
12 X 12
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
STG
SAFETY TUBE GUARDS
Safety Tube Guards are a must for any area in which the debris from a
broken lamp cannot be tolerated. Standard for T8* and T12* lamps.
•
•
•
•
•
Unbreakable Polycarbonate
4’ and 8’ Lengths Available.
UV Filters
Endcaps hold lamps in place and prevent tubes from falling
*Colors: Blue, Green, Red, Pink and Bug Yellow
ue
Bl
Gr
Endcaps for Color Tube Guards
Endcaps for Clear Tube Guards
n
ee
d
Re
nk
Pi
g
Bu
lo
l
Ye
r
ea
w
Cl
SAFETY TUBE GUARDS FOR T-12 LAMPS
SAFETY TUBE GUARDS FOR T-8 LAMPS
POLYCARBONATE
POLYCARBONATE
4’
ST12-4-24
CLEAR
8’
4’
ST12-8-24
CLEAR
WITH ENDCAPS
8’
ST8-4-24
ST8-8-24
WITH ENDCAPS
COLORS
COLORS
BLUE
ST12-4-BL
-
BLUE
ST8-4-BL
ST8-8-BL
BUG YELLOW
ST12-4-BUGYELLOW
ST12-8-BUGYELLOW
BUG YELLOW
ST8-4-BUGYELLOW
ST8-8-BUGYELLOW
GREEN
-
ST12-8-GREEN
GREEN
-
ST8-8-GREEN
PINK
-
ST12-8-PINK
PINK
-
ST8-8-PINK
RED
-
-
RED
ST8-4-RD
ST8-8-RD
UV
ST12-4-UV
ST12-8-UV
UV
ST8-4-UV
ST8-8-UV
ENDCAPS
ST12-ENDCAP
ENDCAPS
ST8-ENDCAP
ST12-ENDCAP(INSIDE)
Tube Guards are not recommended for use with T5HO lamps.
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
T5HO Tube Guards
T5HO
The new T5 HO Tube Guard features an increased size
and venting endcaps. The increased size allows a greater
distance of the guard from the hottest point of the lamp
near the end of the lamp. This distance reduces the
temperature of the guard material measured at the inside
wall of the guard.
The T5 HO Tube Guard is suitable for use with T5 HO
lamps in normal operating conditions where the surface
of the lamp does not exceed 200°F.
SAFETY TUBE GUARDS FOR T5HO LAMPS
POLYCARBONATE
4’
ST5HO-4
CLEAR
PCS/CTN
48
WITH ENDCAPS
"A" - CUT TUBE LENGTH
T5 - HO
.94
Black
Endcaps
"B" - OVERALL LENGTH
T-5 HD
T5 HO Tube Guards
P/N 4’
Nominal Length
Color
NOM.
LENGTH
ST5HO-4Clear
DIM “A”
44.68”
DIM “B”
45.27”
4'
CLEAR
T5 HO TUBEGUARDS USE ONLY WHEN IN CONJUNCTION WITH ELECTRONIC HIGH EFFICIENCY BALLASTS THAT ARE
DESIGNED TO PREVENT OVERHEATING OF THE LAMP DURING USE AND AT “END OF LIFE”
It is not recommended using under any condition where surface lamp temperature can exceed 200 degrees F or in an enclosed fixture where normal
venting is prohibited. Not recommended for use with dimming systems or applications where power surges or spikes can cause arcing or over-burning
NOTE:
of lamps.
1) TOLERANCE = CUT TUBE LENGTH +.00/-.06
NO WARRANTY
2) END CAP MATERIAL: BLACK POLYPROPYLENE
3) WALL THICKNESS: .015 .002
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
COLOR
V07052016
-
CITADEL™ ENCLOSURES
CITADEL 2™
CITADEL 4™
CITADEL 4i™
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CITADEL 2™ OEM COMPONENTS:
GASKETED ENCLOSURE
SECOND GENERATION GASKETED ENCLOSURES
Components Tested and Certified by NSF International
UL FILE E215168
CT2
FLUORESCENT:
• Food processing facilities
• Commercial kitchens
• Breweries
• Industrial facilities
• Livestock containment buildings
• Parking Garages
• Under Awnings
• Car Washes
2’, 4’ and 8’
Lengths
CITADEL 2™ offers more versatility and benefits than any
other weatherproof enclosure offered in North America.
•
Low profile designed for T8 and T5 lamps
•
Poured in place gasket and cam latches seal the enclosures from most hostile
environments.
•
Economical Mounting System can provide dramatic savings on the installation
labor.
•
Diffusers resist breakage to reduce replacement and maintenance costs.
•
Optically Clear Lens for energy efficiency; designed for use with reflectors
•
FR50™ Frosted Lenses for smooth distribution
•
Three lengths (2’, 4’, & 8’).
•
Two housing widths (4” & 6-3/4”)
•
Utilizes off the shelf 1/2” fittings.
•
Tamper resistant latches: Patented Clear or White Captive, Clear Polycarbonate
or Stainless Steel
Patented
CITADEL 2’s™ Mounting options
offer a huge advantage over
traditional enclosures.
•
Stainless steel mounting hardware.
•
No holes ever have to be drilled through
the housing for installation.
•
Stainless steel bail available for chain
hung installations.
•
Installation time is dramatically reduced,
providing lower installed costs
Stainless Steel
Mounting Brackets
and Bails
Geartrays carry all the
electrical gear.
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
GASKETED ENCLOSURE
CT2
FLUORESCENT:
SECOND GENERATION GASKETED ENCLOSURES
STANDARD MATERIAL
PIECES REQUIRED
PER ASSEMBLY
2’
4'
8’
AVAILABLE OPTIONS
HOUSING
UL RATED: 5VA(f1) FRP
1
1
1
NA
DIFFUSER
LINEAL RIBBED: PC OR IMPACT
RESISTANT ACRYLIC (f1) MATERIAL
1
1
1
LINEAL RIBBED DIFFUSER (DIRA/DP)
OR DEEP LENS (LIRA)
AVAILABLE IN CLEAR OR FR50
FROSTED
GEARTRAY
CRS: MIN 87% REFLECTANCE
1
1
1
T5, T8, T8HO, UNIVERSAL
STAINLESS STEEL
2
2
3
NA
RETAINER CLIP SCREW
100 PCS / BAG
2
2
3
NA
GEARTRAY SAFETY STRAP
100 PCS / BAG
2
2
2
NA
LATCHES
POLYCARBONATE
1 BAG
1 BAG
1 BAG
STAINLESS STEEL LATCHES
SECURE LOCING PLASTIC (POM)
ENDPLUG
INCLUDED IN LATCH BAG
1
1
1
NA
STAINLESS STEEL
2
2
2
NA
GEARTRAY RETAINER CLIP
MOUNTING BRACKET
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT2
GASKETED ENCLOSURE
FLUORESCENT:
DIFFUSERS AND OPTICALLY CLEAR LENS
Deep Lens for the Citadel 2™
• Designed Specifically for use with Reflectors
• Injection Molded with 100% Impact Resistant Acrylic
• 2, 4 and 8 Foot Lengths
• 3.50” Deep x 6.40” Wide
• Optically Clear with Frosted Ends
• FR50™ Frosted
• Integral Posts for Lens Safety Tether
• SLP Exclusive Guardian Seal™
Shallow Lens for the Citadel 2™
• Designed for use with LED's or Fluorescent
• Optically Clear
• 4 Foot Length Only
• 1.92” Deep x 6.40” Wide
Lineal Ribbed Diffusers for the Citadel 2™
• Very tough diffusers resist breakage to reduce replacement
and maintenance costs.
• 2, 4 and 8 Foot Lengths
• 1.92” Deep x 6.40” Wide
Deep Lens for the Citadel 2™
Lenses and Diffusers Available in FR50™ Frosted Material
6.75"
4.00"
6.75"
6.75"
5.63"
4.50"
4.50"
4.19"
Citadel 2™ Diffusers
WIDTH
NARROW
(1 LAMP)
PART NO. FOR
FR50™ FROSTED
PCS/CTN
WT/CTN
FULL SKID
QTY.
CT2-DP-1L4
CT2-DP-1L4-FR50
30
25LBS/11,3KG
180
CT2-DIRA-1L4
CT2-DIRA-1L4-FR50
30
25LBS/11,3KG
180
CT2-CIRA-1L4
CT2-CIRA-1L4-FR50
CT2-CP-1L4
CT2-CP-1L4-FR50
CT2-DP-2L2
CT2-DP-2L2-FR50
20
22LBS/9,97KG
240
IMPACT RESISTANT ACRYLIC
CT2-DIRA-2L2
CT2-DIRA-2L2-FR50
20
21LBS/9,5KG
CT2-LIRA-2L2
CT2-LIRA-2L2-FR50
10
POLYCARBONATE
POLYCARBONATE
CT2-DP-2L4
CT2-DP-2L4-FR50
20
21LBS/9,5KG
240
CT2-DIRA-2L4-FR50
20
38LBS/17,2KG
240
CT2-CIRA-2L4-FR50
20
240
240
DESIGN
4’
LINEAL RIBBED
POLYCARBONATE
4’
2’
LINEAL RIBBED
SMOOTH
SMOOTH
LINEAL RIBBED
POLYCARBONATE
POLYCARBONATE
2'
LINEAL RIBBED
2'
DEEP
4’
LINEAL RIBBED
LINEAL RIBBED
SHALLOW
SHALLOW
DEEP
LINEAL RIBBED
DEEP
4’
4'
WIDE
(2 OR 3
LAMP)
PART NO. FOR
CLEAR
LENGTH
4’
4’
4’
4’
8'
8'
MATERIAL
CT2-DIRA-2L4
CT2-CIRA-2L4
240
180
CT2-CP-2L4
CT2-CP-2L4-FR50
20
CT2-LIRA-2L4
CT2-LIRA-2L4-FR50
20
50LBS/22,6KG
240
CT2-DIRA-2L8
CT2-DIRA-2L8-FR50
10
40LBS/18.14KG
240
CT2-LIRA-2L8
CT2-LIRA-2L8-FR50
10
48LBS/21.7KG
120
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT2
GASKETED ENCLOSURE
FLUORESCENT:
OEM PARTS LIST
CITADEL 2™ HOUSINGS: UL RATED COMPONENTS UL:E215168
WIDTH
LENGTH
NARROW
(1 LAMP)
WIDE
(2 OR 3 LAMP)
MATERIAL
PART #
PCS/CTN
WT/CTN
FULL SKID QTY.
4’
5VA-F1 FIBERGLASS (UL)
CT2-HV5-1L4
30
57LBS/34,5KG
180
2’
CT2-HV5-2L2
20
75LBS/34KG
240
CT2-HV5-2L4
20
57LBS/25,9KG
240
CT2-HV5-2L8
60
420LBS/190,5KG
240
4’
8’
CITADEL 2 ™GEARTRAYS
WIDTH
NARROW
(1 LAMP)
LENGTH
LAMP CONFIGURATION
FINISH
PART #
PCS/CTN
FULL SKID QTY.
100
500
4’
KO’s FOR WITHER 1 T5 OR 1 T8
WHITE ENAMEL
CT2-GT-1L4-U
2’
KO's FOR 2 T5 or 2 T8, KO’S FOR 3RD
PUNCHED FOR 2 T5, KO’S FOR 3RD
PUNCHED FOR 2 T8, KO’S FOR 3RD
KO’s FOR UP TO 3 T5 OR 3 T8
PUNCHED FOR 2 T8HO
PUNCHED FOR 4 4’ T5, KO’s FOR 2 MORE
PUNCHED FOR 4 4’ T8, KO’s FOR 2 MORE
KO’s FOR UP TO 6 4’ T5 OR 6 4’ T8
PUNCHED FOR 2 8’ T8HO
WHITE ENAMEL
CT2-GT-2L2-U
WHITE ENAMEL
CT2-GT-2L4-T5
300
500
WHITE ENAMEL
CT2-GT-2L4-T8
300
500
WHITE ENAMEL
CT2-GT-2L4-U
300
500
WHITE ENAMEL
CT2-GT-2L4-T8HO
300
500
WHITE ENAMEL
CT2-GT-2L8-T5
100
500
WHITE ENAMEL
CT2-GT-2L8-T8
100
500
WHITE ENAMEL
CT2-GT-2L8-U
100
500
WHITE ENAMEL
CT2-GT-2L8-T8HO
100
500
4’
WIDE
(2 OR 3 LAMP)
8’
500
CITADEL 2™ HARDWARE
NARROW MOUNTING BRACKET*
MOUNTING
BRACKETS
MATERIAL
PART #
STAINLESS STEEL
CT2-MB-1L
PCS/BAG
PCS/CTN
WT/CTN
250
9LBS/4,1KG
WIDE MOUNTING BRACKET*
STAINLESS STEEL
CT2-MB-2L
400
18KLBS/8,2KG
PRE PACKAGED 2 PER BAG
STAINLESS STEEL
CT2-MB-2L-2
250
31LBS/14.06KG
DUAL PENDANT MOUNT BRACKET
STAINLESS STEEL
CT2-MB-2L-MCH
CHAIN HANG: MOUNTING BRACKET BAIL STAINLESS STEEL
CT-BAIL
45 DEGREE MOUNTING BRACKET
STAINLESS STEEL
CT2-MB-2L45
45 DEGREE MOUNTING BRACKET PACK
STAINLESS STEEL
CT2-MB-2L45-2
500
BAG OF 100
27LBS/12,2KG
* TWO MOUNTING BRACKETS REQUIRED PER HOUSING
GEARTRAY RETAINER CLIPS
GEARTRAY RETAINER CLIP SCREWS (100 PER BAG)
CT-RC
200
2400
16LBS/7,3KG
41KLBS/18,6KG
52LBS/23,6KG
CT-SCRW
100
10,000
CT-ENDPLUG
200
2000
22LBS/10KG
GEARTRAY SAFETY STRAPS (100 PER BAG)
CT-SST
100
10,000
17LBS/7,7KG
LENS TETHER (20 PER BAG)
CT-LT12
20
2000
11LBS/7KG
GASKET AND SHIM (100 PER BAG)
CT-DA5
100
1000
1/2" HUB
CT-DCB-50
200
30LBS/13.6KG
3/4" HUB
CT-DCB-75
100
20LBS/9.07KG
ENDPLUGS
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT2
GASKETED ENCLOSURE
FLUORESCENT:
CITADEL 2™ LATCHES
Latches
MATERIAL
PART #
PCS/BAG
PCS/CTN
CITADEL 2 STAINLESS LATCH
STAINLESS
CT2-LATCHSS
BAG OF 200
2000
WT/CTN
62LBS
4’ LATCH BAG WITH ENDPLUGS
STAINLESS
CT2-LATCH4SS
8
175
37LBS/16,9KG
STAINLESS
CT2-LATCH8SS
14
100
35LBS/15,9KG
SECURE LOCKING PLASTIC LATCH
ACETAL COPOLYMER
CT2-LATCHW
BAG OF 200
1600
25LBS/11.34KG
ACETAL COPOLYMER
CT2-LATCH2W
6
100
ACETAL COPOLYMER
CT2-LATCH4W
8
100
ACETAL COPOLYMER
CT2-LATCH8W
14
150
POLYCARBONATE
CT2-LATCHCC
BAG OF 200
1600
POLYCARBONATE
CT2-LATCH4CC
8
100
POLYCARBONATE
CT2-LATCH8CC
14
80
Reflectors for the Citadel 2™ Housing
Two Reflector Designs:
Basic & Wide
Distribution
Both with Enhanced
Specular Finish
Basic Reflector:
Wide Distribution Reflector:
* Basic Reflector for use with a shallow or deep lens.
* Reflector is a 2 piece assembly.
Minimum 92%
Reflectivity
Citadel 2™ Housing
Geartray
Basic Reflector
For use with T5 & T8
Lamps
*
Wide Distribution
Reflector
DIRA Lens
LIRA Lens
Quantity Required
Per Enclosure
Product
Part Number
Length
BASIC
CT2-RF-2L2-B
21.0"
BASIC
CT2-RF-2L4-B
WIDE
CT2-RF-2L4-W
2 Foot
Compatible with SLP’s
4 Foot
8 Foot
44.5”
1
2
44.5”
2
4
1
DIRA Lens
LIRA Lens
Carton
QTY
Carton
Weight
√
750
320
√
375
180
√
√
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
GASKETED ENCLOSURE
CT4
FLUORESCENT:
WIDE GASKETED ENCLOSURES FOR WET OR DUSTY LOCATIONS
UL Wet Location
NEMA 4X
IP66
IP67
ROHS
PATENTED
DLC QLP
• Food processing facilities
• Commercial kitchens
• Breweries
• Industrial facilities
• Livestock containment buildings
• Parking Garages
• Under Awnings
• Laundries
• Utility Tunnels
• Car Washes
•
•
•
•
•
•
CITADEL 4™ Designed to minimize the retention of liquids or
debris when hosed off. Very durable materials.
•
•
•
5VA (f1) housing
Geartrays for 4 or 6 lamp T5, T8 and
Universal configurations
Water clear lens with frosted ends or
full frosted lens
Poured in place gasket
All stainless steel hardware
Captive Geartray operates from
either side
Mounting options for V-Hook, Cable
and Ceiling mount systems
Optional specular reflectors
Wide profile designed around T8 and T5 lamps for long term
energy savings
•
UL evaluated for 25 & 40 degree C ambient temperatures
•
Poured in place gasket and stainless steel latches seal the
enclosures from most hostile environments
•
Economical Mounting Options can provide dramatic savings
on the installation labor
•
Very tough diffusers resist breakage and reduce replacement
and maintenance costs
•
Optional specular reflectors provide narrow beam distribution
•
4 and 6 lamp configurations are available for both T5 and T8
to best meet your specific needs
•
Utilizes off the shelf 1/2” fittings
•
Tamper resistant stainless steel latches: standard
Citadel 4™ Universal Mounting
Bracket can be used with V-hook,
cable or ceiling mount systems.
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
GASKETED ENCLOSURE
CT4
FLUORESCENT:
OEM COMPONENTS LIST:
CITADEL 4™ HOUSING: UL RATED COMPONENTS UL: E215168
DESCRIPTION
MATERIAL
PART #
PACK
WT/CTN
SKID QTY
STANDARD HOUSING
5VA-f1 FIBERGLASS (UL) 1 HOLE AT END
CT4-HV5-1H
10 PER CARTON
68LBS/ 30.84KG
90
STANDARD HOUSING
5VA-f1 FIBERGLASS (UL) HOLES AT BOTH ENDS
CT4-HV5-2H
10 PER CARTON
68LBS/ 30.84KG
90
CITADEL 4™ DIFFUSERS
DESIGN
WATER CLEAR WITH
MATERIAL
PART #
PACK
WT/CTN
SKID QTY
CLEAR POLYCARBONATE
CT4-DP
10 PER CARTON
49LBS/ 22.22
90
FROSTED ENDS
CLEAR IMPACT RESISTANT ACRYLIC
CT4-DIRA
10 PER CARTON
47LBS/ 21.31
90
FROSTED LENS
FROSTED POLYCARBONATE
CT4-DP-FR50
10 PER CARTON
49LBS/ 22.22
90
FROSTED IMPACT RESISTANT ACRYLIC
CT4-DIRA-FR50
10 PER CARTON
47LBS/ 21.31
90
CITADEL 4™ GEARTRAYS
LAMP CONFIGURATION
FINISH
PART #
PACK
FULL SKID QTY
FULL SKID WT.
3 LAMPS
WHITE ENAMEL
CT4-GT-3LT5 or CT4-GT-3LT8
BULK PACK
360
2125LBS/963.88KG
4 LAMPS
WHITE ENAMEL
BULK PACK
360
2125LBS/963.88KG
4 LAMPS Universal
WHITE ENAMEL
CT4-GT-4LU
BULK PACK
360
2125LBS/963.88KG
5 LAMPS
WHITE ENAMEL
BULK PACK
360
2125LBS/963.88KG
6 LAMPS
WHITE ENAMEL
BULK PACK
360
2125LBS/963.88KG
6 LAMPS Universal
WHITE ENAMEL
CT4-GT-6LU
BULK PACK
360
2125LBS/963.88KG
DESCRIPTION
PART #
PACK
PCS/CTN
WT/CTN
CT4-LATCHSS
120 PER BAG
2400
48LBS/ 21.77KG
CT4-MB
40 PER BAG
1200
17LBS/ 7.71KG
CEILING MOUNT
CT4-CM1.25
20 PER BUNDLE
400
64LBS/29.03KG
V-HOOK
CT4-VHOOK
20 PER BUNDLE
5000
453LBS/205.47KG
CT4-GTRC
40 PER BAG
1200
24LBS10.88KG
52LBS/23.58KG
STAINLESS STEEL LATCH
UNIVERSAL MOUNTING BRACKET
GEARTRAY RETAINER CLIP SCREWS
CT-SCRW
100 PER BAG
10,000
CT-SCRW-UGT
100 PER BAG
10,000
1/2" HUB
CT-DCB-50
200
3/4" HUB
UNIVERSAL GEARTRAY BALLAST SCREWS
30LBS/13.6KG
CT-DCB-75
100
12" GEARTRAY TETHER (2 PER FIXTURE)
CT-LT12
20 PER BAG
2000
11LBS/4.98KG
8" LENS TETHERS (2 REQUIRED PER FIXTURE)
CT-LT8
20 PER BAG
3000
14LBS/6.35KG
CT-ENDPLUG-B
200 PER BAG
2000
23LBS/10.43KG
END PLUGS
20LBS/9.07KG
CITADEL 4™ REFLECTORS
LAMP CONFIGURATION
FINISH
PART #
4 LAMPS
SPECULAR ALUMINUM
CT4-RF-4L-U
6 LAMPS
SPECULAR ALUMINUM
CT4-RF-6L-U
FULL SKID QTY
FULL SKID WT.
2 REQUIRED PER FIXTURE
2160
200 LBS/90.72KG
3240
1130 LBS/512.56KG
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT4i
CITADEL 4i OEM COMPONENTS:
GASKETED ENCLOSURE
FLUORESCENT:
WIDE GASKETED ENCLOSURE FOR INDUSTRIAL LOCATIONS
UL Wet Location
NEMA 4X
IP65
IP66
IP67
ROHS
PATENT PENDING
DLC QLP
CITADEL 4i Designed for Industrial Applications. Highly Adaptable and Robust.
•
5VA (f1) Housing (Patent Pending)
- Utilizes off the shelf 1/2” fittings
- Poured in place gasket helps seal the enclosures from most hostile environments
• Heat Management System (Patent Pending)
• Board Trays punched for Wide, Medium and Narrow LED board widths
• Secure Locking Plastic Latches (Patented)
- Acetal Copolymer (Similar to Celcon® or Delrin®)
• 316 Stainless Steel Latches
• Latches are Captive with Optional Tamper Resistance
• Economical Mounting Options can provide dramatic savings on the installation labor
- V-Hook, Flexible Ceiling Mount, and Patented Rigid Ceiling Mount provided by SLP
- Compatable with Chain, Cable, Dual Pendant Mount provided by others
Parking Garages
Exterior Retail
Construction Sites
Gymnasiums
Freezers
Food Processing
Beverage Industry
Manufacturing
Same as CITADEL 4™
• Geartray 3, 4, 5 and 6 lamp configurations are available for both T5, T8 & Universal
• Impact Resistant Diffusers
• Captive Geartray or Board tray operates from either side
• Optional specular reflectors for focused distribution if required
PATENTED
PATENTED
*Lamps, Boards and Drivers Provided by Others
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT4i
CITADEL 4i OEM COMPONENTS:
GASKETED ENCLOSURE
FLUORESCENT:
CITADEL 4i HOUSING: UL RATED COMPONENTS UL: E215168
MATERIAL
PART #
PACK
WT/CTN
SKID QTY
BASIC HOUSING
5VA-f1 FIBERGLASS (UL)
CT4i-HV5
10 PER CARTON
68LBS/ 30.84KG
90
HEAT MANAGEMENT
CT4i-HV5-BR
10 PER CARTON
68LBS/ 30.84KG
90
DESIGN
MATERIAL
PART #
PACK
WT/CTN
SKID QTY
WATER CLEAR WITH FROSTED ENDS
CLEAR POLYCARBONATE
CT4-DP
10 PER CARTON
49LBS/ 22.22
90
CT4-DIRA
10 PER CARTON
47LBS/ 21.31
90
CT4-DP-FR50
10 PER CARTON
49LBS/ 22.22
90
CT4-DIRA-FR50
10 PER CARTON
47LBS/ 21.31
90
FROSTED LENS
CITADEL 4i™ GEARTRAYS
LAMP CONFIGURATION
FINISH
PART #
PACK
FULL SKID QTY
FULL SKID WT.
3 LAMPS
WHITE ENAMEL
BULK PACK
360
2125LBS/963.88KG
4 LAMPS
WHITE ENAMEL
BULK PACK
360
2125LBS/963.88KG
4 LAMPS Universal
WHITE ENAMEL
CT4-GT-4LU
BULK PACK
360
2125LBS/963.88KG
5 LAMPS
WHITE ENAMEL
BULK PACK
360
2125LBS/963.88KG
6 LAMPS
WHITE ENAMEL
BULK PACK
360
2125LBS/963.88KG
6 LAMPS Universal
WHITE ENAMEL
CT4-GT-6LU
BULK PACK
360
2125LBS/963.88KG
CITADEL 4i HARDWARE
DESCRIPTION
PART #
PACK
PCS/CTN
WT/CTN
CT4i-LATCHSS
120 PER BAG
1800
59LBS/ 21.77KG
CT4i-LATCHW
120 PER BAG
1200
23LBS/10.43KG
STAINLESS STEEL MOUNTING STRAP
CT4i-MS-SS
40 PER BAG
480
39LBS/ 7.71KG
ZINC PLATED MOUNTING STRAP
CT4i-MS-ZP
40 PER BAG
480
35LBS/15.87KG
STAINLESS STEEL RIGID MOUNTING BEAM
CT4i-MB-SS
20 PER BAG
20
17LBS/7.71KG
ZINC PLATED RIGID MOUNTING BEAM
CT4i-MB-ZP
20 PER BAG
20
17LBS/7.71KG
FLEXIBLE CEILING MOUNT
CT4-CM1.25
20 PER BUNDLE
400
64LBS/29.02KG
V-HOOK
CT4-VHOOK
20 PER BUNDLE
5000
453LBS/205.47
CT4-GTRC
40 PER BAG
1200
24LBS/ 10.43KG
CT-SCRW
100 PER BAG
10,000
47LBS/23.58KG
1/2" HUB
CT-DCB-50
200
3/4" HUB
30LBS/13.6KG
CT-DCB-75
100
CT-LT12
20 PER BAG
2000
11LBS/4.98KG
CT-LT8
20 PER BAG
3000
14LBS/6.35KG
CT-ENDPLUG-B
200
3000
23LBS/10.43KG
CT4i-GND-15
100 PER BAG
2000
23LBS/10.43KG
CT4i-BAB
200
6000
49LBS/22.22KG
CT4i-BAFN
200
6000
37LBS/16.78KG
END PLUGS
GROUND WIRE
BALLAST ATTACHMENT BOLT
BALLAST ATTACHMENT FLANGED NUT
20LBS/9.07KG
CITADEL 4i™ REFLECTORS
LAMP CONFIGURATION
FINISH
PART #
4 LAMPS
SPECULAR ALUMINUM
CT4-RF-4L-U
6 LAMPS
SPECULAR ALUMINUM
CT4-RF-6L-U
FULL SKID QTY
FULL SKID WT.
2160
200 LBS/90.72KG
3240
1130 LBS/512.56KG
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CITADEL™ LED
ENCLOSURE COMPONENTS
CITADEL 2™ Style 1
TRADITIONAL LED
SPECIAL APPLICATIONS
WIDE DISTRIBUTION
CITADEL 4™ LED
CITADEL 4i™ LED
CITADEL 4S™ LED
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT2LED
CITADEL 2™
LED ENCLOSURE
LED STYLE 1:
Citadel 2 Enclosure for LED: STYLE 1
Patent Pending
• Multiple Lighting Solutions
• Quick and Easy Assembly using
Board Retention Clips
LED Driver
Supplied By Others
Universal
Geartray Screw
• Save Time on Maintenance
• Dual Row Board Tray for Typical
Board Widths 0.95" or 1.60"
• Single Center Row Board Tray for
Board Widths 1.60" or less
Driver Tray
CT-LED-DT-(U,L)
CT2 Flat Board Tray
CT2-LED-BT1-2L(2,4,8) -2R- (095,160,190)
LED Module
Supplied By Others
Board Retention Clip
CT-LED-BRC-SM
Lance keeps
boards from
slipping out
of place
CITADEL 2™ offers more versatility and benefits
than any other weatherproof enclosure offered
in North America.
Scratch Proof
Conductivity Inhibitor Coating
Clip Designed To Works
For .060" To .084" Overall Thickness.
Boardtrays for single row
•
Flat Board Tray Designed For LED Board Placement
•
Board Retention Clips Pop In Place To Hold LED Boards
- 2': 4 Clips, 4': 8 Clips, 8': 16 Clips
•
NO SCREWS OR TAPE
•
Traditional Citadel 2 Low Profile Housing
•
Three Lengths (2’, 4’, & 8’).
•
Two Housing Widths (4” & 6-3/4”)
•
Poured in Place Gasket and Latches Seal Enclosures from
Most Hostile Environments
•
Tamper Resistant Latches: White Captive, Clear Captive
Polycarbonate Or Stainless Steel
•
Economical Mounting System Can Provide Dramatic
Savings On The Installation Labor.
•
FR50™ Frosted Lenses For Smooth Distribution
Wide Retainer Clips
for Center row of LEDs
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT2LED
CITADEL 2™
LED ENCLOSURE
LED STYLE 1:
Patent Pending
LED Driver
Supplied By Others
Universal
Geartray Screw
Driver Tray
CT-LED-DT-(U,L)
CT2 Flat Board Tray
CT2-LED-BT1-2L(2,4,8) -2R- (095,160,190)
LED Module
Supplied By Others
CT-LED-BRC-SM
STANDARD MATERIAL
PIECES REQUIRED
PER ASSEMBLY
AVAILABLE OPTIONS
2’
4'
8’
HOUSING
1
1
1
NA
DIFFUSER
LINEAL RIBBED: PC OR IMPACT
1
1
1
LINEAL RIBBED DIFFUSER (DIRA/DP)
OR DEEP LENS (LIRA) AVAILABLE IN
CLEAR OR FR50 FROSTED
1
1
1
2L2, 2L4, 2L8 / 1R, 2R / 095, 160
STAINLESS STEEL
2
2
3
NA
RETAINER CLIP SCREW
100 PCS / BAG
2
2
3
NA
BOARD RETENTION CLIPS
METAL WHITE
4
8
16
NA
DRIVER TRAY
SHEET METAL
1
1
2
L-SHAPE FOR 1 / U-SHAPE FOR 2
BOARDTRAY
RETAINER CLIP
UNIVERSAL GEARTRAY
SCREW *CT-SCRW-UGT
LATCHES
ENDPLUG
MOUNTING BRACKET
2 PER DRIVER TRAY + 2 PER DRIVER
L-SHAPE = 4 & U-SHAPE = 6
CT-SCRW-UGT
100 PCS / BAG
2
2
2
NA
POLYCARBONATE
1 BAG
1 BAG
1 BAG
(6)
(8)
(14)
SECURE LOCKING PLASTIC (POM)
1
1
1
NA
STAINLESS STEEL
2
2
3
NA
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT2LED
CITADEL 2™
LED ENCLOSURE
LED STYLE 1:
CITADEL 2™ HOUSINGS: UL RATED COMPONENTS UL:E215168
WIDTH
LENGTH
NARROW (1 LAMP)
WIDE
PCS/CTN
WT/CTN
FULL SKID QTY.
4’
CT2-HV5-1L4
30
57LBS/34,5KG
180
2’
CT2-HV5-2L2
20
75LBS/34KG
240
CT2-HV5-2L4
20
57LBS/25,9KG
240
CT2-HV5-2L8
60
420LBS/190,5KG
240
4’
(2 OR 3 LAMP)
MATERIAL
PART #
8’
WIDTH
NARROW
(1 LAMP)
WIDE
(2 OR 3
LAMP)
LENGTH
DESIGN
LINEAL RIBBED
4’
MATERIAL
POLYCARBONATE
PART NO. FOR
PART NO. FOR
CLEAR
FR50™ FROSTED
CT2-DP-1L4
FULL SKID
PCS/CTN
WT/CTN
CT2-DP-1L4-FR50
30
25LBS/11,3KG
180
30
25LBS/11,3KG
180
4’
LINEAL RIBBED
CT2-DIRA-1L4
CT2-DIRA-1L4-FR50
4’
SMOOTH
CT2-CIRA-1L4
CT2-CIRA-1L4-FR50
CT2-CP-1L4-FR50
QTY.
4'
SMOOTH
POLYCARBONATE
CT2-CP-1L4
2’
LINEAL RIBBED
POLYCARBONATE
CT2-DP-2L2
CT2-DP-2L2-FR50
20
22LBS/9,97KG
240
2'
LINEAL RIBBED
CT2-DIRA-2L2
CT2-DIRA-2L2-FR50
20
21LBS/9,5KG
240
2'
DEEP
CT2-LIRA-2L2
CT2-LIRA-2L2-FR50
10
4’
LINEAL RIBBED
POLYCARBONATE
CT2-DP-2L4
CT2-DP-2L4-FR50
20
21LBS/9,5KG
240
4’
LINEAL RIBBED
CT2-DIRA-2L4
CT2-DIRA-2L4-FR50
20
38LBS/17,2KG
240
4’
SHALLOW
CT2-CIRA-2L4-FR50
20
240
4’
SHALLOW
POLYCARBONATE
CT2-CP-2L4-FR50
20
240
4’
DEEP
CT2-LIRA-2L4-FR50
20
50LBS/22,6KG
240
8'
LINEAL RIBBED
CT2-DIRA-2L8-FR50
10
40LBS/18.14KG
240
8'
DEEP
CT2-LIRA-2L8-FR50
10
48LBS/21.7KG
120
CT2-CIRA-2L4
CT2-CP-2L4
CT2-LIRA-2L4
CT2-DIRA-2L8
CT2-LIRA-2L8
180
HARDWARE FOR CT2 LED
MATERIAL
PART #
PCS/BAG
PCS/CTN
WT/CTN
STAINLESS STEEL
CT2-MB-1L
SINGLE
250
9LBS/4,1KG
STAINLESS STEEL
CT2-MB-2L
SINGLE
400
18KLBS/8,2KG
STAINLESS STEEL
CT2-MB-2L-2
250
31LBS/14.06KG
DUAL PENDANT MOUNT BRACKET
STAINLESS STEEL
CT2-MB-2L-MCH
60
CHAIN HANG: MOUNTING BRACKET BAIL
STAINLESS STEEL
CT-BAIL
BAG OF 100
MOUNTING
BRACKETS
500
27LBS/12,2KG
CT-SCRW
100
10,000
52LBS/23,6KG
UNIVERSAL GEARTRAY SCREWS
CT-SCRW-UGT
100
10,000
62LBS/28,12KG
ENDPLUGS
CT-ENDPLUG
200
2000
22LBS/10KG
CT-SST
100
10,000
17LBS/7,7KG
CT-LT12
20
2000
11LBS/7KG
WT/CTN
1/2" HUB OR 3/4" HUB
CT-DCB-50 OR CT-DCB-75
Latches
MATERIAL
PART #
PCS/BAG
PCS/CTN
STAINLESS
CT2-LATCHSS
BAG OF 200
2000
62LBS
STAINLESS
CT2-LATCH4SS
8
175
37LBS/16,9KG
STAINLESS
CT2-LATCH8SS
14
100
35LBS/15,9KG
ACETAL COPOLYMER
CT2-LATCHW
BAG OF 200
1600
25LBS/11.34KG
ACETAL COPOLYMER
CT2-LATCH2W
6
100
29LBS/13,2KG
ACETAL COPOLYMER
CT2-LATCH4W
8
100
31LBS/14KG
ACETAL COPOLYMER
CT2-LATCH8W
14
150
25LBS/11.34KG
25LBS/11.34KG
POLYCARBONATE
CT2-LATCHCC
BAG OF 200
1600
POLYCARBONATE
CT2-LATCH4CC
8
100
31LBS/14KG
POLYCARBONATE
CT2-LATCH8CC
14
80
25LBS/11.34KG
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CITADEL 2™
LED ENCLOSURE
CT2LED
LED STYLE 1:
*Boards and Drivers Provided by Others
WIDE 2 ROW (2R) BOARDTRAYS FOR TRADITIONAL CT2 LED
PCS/
CTN
CT2-LED-BT1-2L2-2R-095
2' BOARD TRAY 2 ROWS FOR 0.95" BOARDS
WHITE ENAMEL STEEL
WHITE ENAMEL STEEL
CT2-LED-BT1-2L4-U
4' BOARD TRAY 2 ROWS FOR 0.95" or 1.60" BOARDS
WHITE ENAMEL STEEL
WHITE ENAMEL STEEL
WHITE ENAMEL STEEL
WHITE ENAMEL STEEL
WHITE ENAMEL STEEL
FULL SKID
QTY.
WT/CTN
FULL SKID
QTY.
WT/CTN
FULL SKID
QTY.
WT/CTN
*(-190) BOARD TRAYS DO NOT USE BOARD RETENTION CLIPS
WIDE 1 ROW (1R) BOARDTRAYS FOR TRADITIONAL CT2 LED
PCS/
CTN
CT2-LED-BT1-2L2-1R
*2' BOARD TRAY FOR CENTER ROW BOARDS <1.60" WIDE
WHITE ENAMEL STEEL
2' BOARD TRAY FOR CENTER ROW BOARDS 0.95" WIDE
WHITE ENAMEL STEEL
WHITE ENAMEL STEEL
WHITE ENAMEL STEEL
WHITE ENAMEL STEEL
WHITE ENAMEL STEEL
CT2-LED-BT1-2L4-1R
CT2-LED-BT1-2L8-1R
WHITE ENAMEL STEEL
WHITE ENAMEL STEEL
WHITE ENAMEL STEEL
ALL 1R BOARDTRAYS REQUIRE CT-RC-WIDE
*GENERIC BOARD TRAYS DO NOT USE BOARD RETENTION CLIPS
NARROW BOARDTRAY FOR TRADITIONAL CT2 LED
PCS/
CTN
CT2-LED-BT1-1L4-1R
**FLAT BOARD TRAY SINGLE CENTER ROW(SEE NOTES BELOW) WHITE ENAMEL STEEL
**1R BOARDTRAYS REQUIRE CT-RC-WIDE
CT-BRC-SM-S RETENTION CLIP USED FOR CERTAIN BOARD SIZES - CONTACT SLP FOR INFORMATION
COMPONENTS FOR TRADITIONAL CT2 LED
PCS/
BAG
CT-LED-DT-L
DRIVER TRAY "L" SHAPE FOR ONE DRIVER (16.9" long)
WHITE ENAMEL STEEL
CT-LED-DT-U
DRIVER TRAY "U" SHAPE FOR TWO DRIVERS (14.4" long)
CT-LED-BRC-SM
WHITE SPRING STEEL
CT-LED-BRC-SM-S
BOARD RETENTION CLIP FOR 1L4
WHITE SPRING STEEL
CT-RC
CITADEL RETAINER CLIP FOR 2R BOARDTRAYS
CT-RC-WIDE
CITADEL RETAINER CLIP WIDE FOR 1R BOARDTRAYS
PCS/CTN
WT/CTN
200
336
200
5000
STAINLESS STEEL
200
2400
STAINLESS STEEL
1500
16LBS/7,3KG
31LBS/14,1KG
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CITADEL 2™
LED ENCLOSURE
CT2LED
LED STYLE 2:
Patent Pending
Parking Garages Low Bay
Citadel 2 Housing
Wire Access Cover
The LED Reflector Kit consists of 2 clips
that snap into each end of the boardtray
to hold a wide distribution reflector that
spreads the LEDs distribution more evenly
than directing it downward. Citadel 2 LED
components plus the Reflector Kit meet
DLC V2.0 requirements for Parking Garage
Applications.
Driver Tray
LED Driver
Supplied by Other
Board Tray Retainer Clip
Board Tray
End Cap
OPTION
DLC PARKING
GARAGE REFLECTOR
LED Boards
Supplied by Other
Reflector Clip
Citadel 2 Diffuser
STANDARD MATERIAL
HOUSING
PIECES REQUIRED PER
ASSEMBLY
AVAILABLE OPTIONS
2’
4'
1
1
NA
PC OR IMPACT RESISTANT ACRYLIC
(f1) MATERIAL
1
1
LINEAL RIBBED (DIRA/DP) (W/O RF)
OR DEEP LENS (LIRA) AVAILABLE IN
CLEAR OR FR50 FROSTED
BOARDTRAY
ALUMINUM EXTRUSION
1
1
2L2, 2L4 / 160
BOARDTRAY RETAINER CLIP
ALUMINUM EXTRUSION
2
2
NA
100 PCS / BAG
2
2
NA
ABS WHITE
NA
DIFFUSER
RETAINER CLIP SCREW
4
8
BOARDTRAY ENDCAPS
2
2
CT2-LED-SCRW-850
4
4
INSTALL ENDCAPS
DRIVER TRAY
SHEET METAL
1
1
WIRE ACCESS COVER
SHEET METAL
1
1
UNIVERSAL GEARTRAY SCREW
CT-SCRW-UGT
2 PER DRIVER TRAY + 2 PER DRIVER
L-SHAPE = 4 & U-SHAPE = 6
100 PCS / BAG
2
2
NA
LATCHES
POLYCARBONATE
1 BAG
(6)
1 BAG
(8)
SECURE LOCKING PLASTIC (POM)
ENDPLUG
1
1
NA
STAINLESS STEEL
2
2
NA
MOUNTING BRACKET
LED Reflector Kit for DLC
SLP ITEM NO.s
DESCRIPTION
Patent Pending
MATERIAL
PIECES PER ASSEMBLY
2'
4'
CT2-LED-BT2M-RFC
CT2 LED REFLECTOR CLIP
LIGHT GRAY NYLON
2
2
CT2-LED-RF-2L2-M
CT2 LED DLC REFLECTOR
SPECULAR ALUMINUM
1
CT2-LED-RF-2L4-M
CT2 LED DLC REFLECTOR
SPECULAR ALUMINUM
1
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT2LED
CITADEL 2™
LED ENCLOSURE
LED STYLE 2:
COMPONENTS FOR TRADITIONAL CT2 LED
PART #
DESCRIPTION
MATERIAL
DRIVER TRAY
COLD ROLLED STEEL
BOARD TRAY
ALUMINUM
CT2-LED-EC-M
BOARD TRAY ENDCAPS
LIGHT GRAY NYLON
2000
CT2-LED-BTRC-2
BOARD TRAY RETAINER CLIPS
ALUMINUM
1500
CT-LED-BRC-M
LIGHT GRAY ABS
CT2-LED-DT-2
CT2-LED-DT-4
CT2-LED-BT2-22-M
CT2-LED-BT2-24-M
CT2-LED-2L2-WAC
WIRE ACCESS COVER
CT2-LED-2L4-WAC
PCS/CTN
500
480
312
960
240
GAVONIZED STEEL
CT-LT12
12' SAFETY TETHER
CT2-MB-2L-2
MOUNTING BRACKET
CT-BAIL
240
2000
11LBS/7KG
STAINLESS STEEL
250
31LBS/14.06KG
STAINLESS STEEL
100
27LBS/12,2KG
CITADEL 2™ HOUSINGS: UL RATED COMPONENTS
WIDTH
LENGTH
2’
WIDE
MATERIAL
4’
WT/CTN
UL:E215168
PCS/CTN
WT/CTN
FULL SKID QTY.
CT2-HV5-2L2
20
75LBS/34KG
240
CT2-HV5-2L4
20
57LBS/25,9KG
240
PART #
WIDTH
NARROW
(1 LAMP)
WIDE
(2 OR 3
LAMP)
LENGTH
DESIGN
MATERIAL
4’
LINEAL RIBBED
POLYCARBONATE
PART NO. FOR
CLEAR
PART NO. FOR
FR50™ FROSTED
PCS/CTN
WT/CTN
FULL SKID
QTY.
CT2-DP-1L4
CT2-DP-1L4-FR50
30
25LBS/11,3KG
180
30
25LBS/11,3KG
180
240
4’
LINEAL RIBBED
CT2-DIRA-1L4
CT2-DIRA-1L4-FR50
4’
SMOOTH
CT2-CIRA-1L4
CT2-CIRA-1L4-FR50
CT2-CP-1L4-FR50
4'
SMOOTH
POLYCARBONATE
CT2-CP-1L4
2’
LINEAL RIBBED
POLYCARBONATE
CT2-DP-2L2
CT2-DP-2L2-FR50
20
22LBS/9,97KG
2'
LINEAL RIBBED
CT2-DIRA-2L2
CT2-DIRA-2L2-FR50
20
21LBS/9,5KG
2'
DEEP
CT2-LIRA-2L2
CT2-LIRA-2L2-FR50
10
4’
LINEAL RIBBED
POLYCARBONATE
CT2-DP-2L4
CT2-DP-2L4-FR50
20
21LBS/9,5KG
240
4’
LINEAL RIBBED
CT2-DIRA-2L4-FR50
20
38LBS/17,2KG
240
4’
SHALLOW
CT2-CIRA-2L4-FR50
20
240
4’
SHALLOW
POLYCARBONATE
CT2-CP-2L4
CT2-CP-2L4-FR50
20
240
4’
DEEP
CT2-LIRA-2L4
CT2-LIRA-2L4-FR50
20
50LBS/22,6KG
240
8'
LINEAL RIBBED
CT2-DIRA-2L8
CT2-DIRA-2L8-FR50
10
40LBS/18.14KG
240
8'
DEEP
CT2-LIRA-2L8
CT2-LIRA-2L8-FR50
10
48LBS/21.7KG
120
HARDWARE FOR TRADITIONAL CT2 LED
ITEM
CT2-DIRA-2L4
CT2-CIRA-2L4
240
180
PART #
PCS/CTN
FULL SKID QTY
WT/CTN
CT-SCRW
100
10,000
52LBS/23,6KG
10,000
CT-SCRW-UGT
100
CT-LED-SCRW-850
100
CT-ENDPLUG
200
2000
22LBS/10KG
CT-SST
100
10,000
17LBS/7,7KG
CT-LT12
20
2000
1/2" HUB
CT-DCB-50
200
30LBS/13.6KG
3/4" HUB
CT-DCB-75
100
20LBS/9.07KG
CITADEL LED SCREWS
ENDPLUGS
11LBS/7KG
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CITADEL 2™
LED ENCLOSURE
CT2LED
LED STYLE 2:
Latches
MATERIAL
PART #
PCS/BAG
PCS/CTN
STAINLESS
CT2-LATCHSS
BAG OF 200
2000
WT/CTN
62LBS
STAINLESS
CT2-LATCH4SS
8
175
37LBS/16,9KG
STAINLESS
CT2-LATCH8SS
14
100
35LBS/15,9KG
ACETAL COPOLYMER
CT2-LATCHW
BAG OF 200
1600
25LBS/11.34KG
ACETAL COPOLYMER
CT2-LATCH2W
6
100
ACETAL COPOLYMER
CT2-LATCH4W
8
100
ACETAL COPOLYMER
CT2-LATCH8W
14
150
POLYCARBONATE
CT2-LATCHCC
BAG OF 200
1600
POLYCARBONATE
CT2-LATCH4CC
8
100
POLYCARBONATE
CT2-LATCH8CC
14
80
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CITADEL 2™
LED ENCLOSURE
CT2LED
LED STYLE 3:
Patent Pending
Low Bay Wide Distribution
The Citadel 2 LED Style 3 is a
sleek version of the Style 2. With
a sheet metal boardtray that
snaps to a traditional geartray
equaling less weight and making
Style 3 a more affordable option
for wide distribution.
Citadel 2 Housing
End Plug
LED Driver
Supplied by Other
Retainer Clip
Single Board (1R)
Gear Tray
LED Module
Supplied by Other
Board Tray
Citadel 2 Diffuser
ITEM
HOUSING
PIECES REQUIRED
PER ASSEMBLY
MATERIAL WITH
AVAILABLE OPTIONS
1
DIFFUSER
1
IMPACT MODIFIED ACRYLIC, POLYCARBONATE
LINEAL RIBBED (DIRA/DP), SMOOTH SHALLOW (CIRA/CP)
OR SMOOTH DEEP LENS (LIRA ACRYLIC ONLY)
AVAILABLE IN CLEAR OR FR50 FROSTED
GEARTRAY
1
SHEET METAL
BOARDTRAY
1
SHEET METAL
RETAINER CLIP
2
316 STAINLESS STEEL
RETAINER CLIP SCREW
2
STEEL ZINC PLATED
BOARD RETENTION CLIPS (SINGLE)
16
SPRING STEEL
UNIVERSAL GEARTRAY SCREW: CTSCRW-UGT
2 PER DRIVER TRAY + 2 PER DRIVER / L-SHAPE = 4 & U-SHAPE = 6
2
NYLON
1 BAG
(8)
SECURE LOCKING PLASTIC (POM) / POLYCARBONATE OR 316 STAINLESS STEEL
ENDPLUG
1
MOUNTING BRACKET
2
316 STAINLESS STEEL
LATCHES
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT2LED
CITADEL 2™
LED ENCLOSURE
LED STYLE 3:
COMPONENTS FOR CT2 LED STYLE 3
PART #
CT2-LED-GT3-22-M
CT2-LED-GT3-24-M
CT2-LED-BT3-22-M-160
CT2-LED-BT3-24-M-160
DESCRIPTION
MATERIAL
PCS/CTN
LED SM GEAR TRAY STY3 MED DIST
SHEET METAL
LED SM BRDTRAY STY3 MED DIST 1.60" BRDS
SHEET METAL
CT-RC
316 STAINLESS STEEL
CT-LED-BRC-SM-S
SINGLE BOARD RETENTION CLIPS
SHEET MTEAL
WT/CTN
CT-LT12
12' SAFETY TETHER
STAINLESS STEEL
2000
11LBS/7KG
CT2-MB-2L-2
MOUNTING BRACKET
316 STAINLESS STEEL
250
31LBS/14.06KG
CT-BAIL
316 STAINLESS STEEL
100
27LBS/12,2KG
CITADEL 2™ HOUSINGS: UL RATED COMPONENTS
WIDTH
LENGTH
2’
WIDE
UL:E215168
WT/CTN
FULL SKID QTY.
CT2-HV5-2L2
20
75LBS/34KG
240
CT2-HV5-2L4
20
57LBS/25,9KG
240
PART #
4’
PCS/CTN
MATERIAL
WIDTH
WIDE
(2 OR 3
LAMP)
LENGTH
DESIGN
MATERIAL
PART NO. FOR
CLEAR
PART NO. FOR
FR50™ FROSTED
PCS/CTN
WT/CTN
FULL SKID
QTY.
CT2-DP-2L2
CT2-DP-2L2-FR50
20
22LBS/9,97KG
240
21LBS/9,5KG
2’
LINEAL RIBBED
POLYCARBONATE
2'
LINEAL RIBBED
CT2-DIRA-2L2
CT2-DIRA-2L2-FR50
20
2'
DEEP
CT2-LIRA-2L2
CT2-LIRA-2L2-FR50
10
4’
LINEAL RIBBED
POLYCARBONATE
CT2-DP-2L4
CT2-DP-2L4-FR50
20
21LBS/9,5KG
240
4’
LINEAL RIBBED
CT2-DIRA-2L4-FR50
20
38LBS/17,2KG
240
4’
SHALLOW
CT2-CIRA-2L4-FR50
20
240
4’
SHALLOW
POLYCARBONATE
CT2-CP-2L4
CT2-CP-2L4-FR50
20
240
4’
DEEP
CT2-LIRA-2L4
CT2-LIRA-2L4-FR50
20
CT2-DIRA-2L4
CT2-CIRA-2L4
240
180
240
50LBS/22,6KG
HARDWARE FOR TRADITIONAL CT2 LED
ITEM
PART #
PCS/CTN
FULL SKID QTY
WT/CTN
CT-SCRW
100
10,000
52LBS/23,6KG
CT-SCRW-UGT
100
10,000
ENDPLUGS
CT-ENDPLUG
200
2000
22LBS/10KG
CT-SST
100
10,000
17LBS/7,7KG
2000
CT-LT12
20
1/2" HUB
CT-DCB-50
200
30LBS/13.6KG
11LBS/7KG
3/4" HUB
CT-DCB-75
100
20LBS/9.07KG
Latches
MATERIAL
PART #
PCS/BAG
PCS/CTN
316 STAINLESS
CT2-LATCHSS
BAG OF 200
2000
62LBS
316 STAINLESS
CT2-LATCH4SS
8
175
37LBS/16,9KG
ACETAL COPOLYMER
CT2-LATCHW
BAG OF 200
1600
25LBS/11.34KG
ACETAL COPOLYMER
CT2-LATCH2W
6
100
ACETAL COPOLYMER
CT2-LATCH4W
8
100
POLYCARBONATE
CT2-LATCHCC
BAG OF 200
1600
POLYCARBONATE
CT2-LATCH4CC
8
100
WT/CTN
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CITADEL 4 LED OEM COMPONENTS:
GASKETED ENCLOSURE
CT4
LED
COMPONENTS FOR CT4 LED APPLICATIONS
Driver Attachment Rail
CT4-2XDAR
Driver Rail Clip
CT-2XDAR-CLIP
UL Wet Location
NEMA 4X
IP65
IP66
IP67
ROHS
DLC QLP
LED Drivers
Supplied By Others
CT4 Flat Board Tray
CT4-LED-BT1-4R (095, 160, or 190)
CT-LED-BRC-SM
LED Boards
Supplied By Others
CITADEL 4 Designed for Industrial
Applications. Now Compatable for
LED Boards. NO TAPE OR SCREWS
•
Citadel 4 Housing with CT4-2XDAR for Driver Mounting
and Heat Management
•
CT4-2XDAR holds up to 4 drivers
•
Flat Board Trays Punched 4 Rows for use with
Board Retention Clip:
Scratch Proof
Conductivity Inhibitor
Coating
Typical 0.95" or 1.60" LED Boards
•
Board Retention Clips Snap Boards Into Place Quickly
- 16 Clips for 4 Rows
•
Scratch Proof And Conductivity Inhibitor Coating On Clips
•
Lances Keeps Boards From Slipping Out of Position
Clip Design Works
for .060" To .084"
Overall Thickness
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT4
CITADEL 4 LED OEM COMPONENTS:
GASKETED ENCLOSURE
LED
COMPONENTS FOR CT4 LED APPLICATIONS
Driver Attachment Rail
CT4-2XDAR
Driver Rail Clip
CT-2XDAR-CLIP
LED Drivers
Supplied By Others
CT4 Flat Board Tray
CT4-LED-BT1-4R (095, 160, or 190)
CT-LED-BRC-SM
LED Boards
Supplied By Others
PIECES REQUIRED
PER ASSEMBLY
STANDARD MATERIAL
AVAILABLE OPTIONS
4'
HOUSING WITH HEAT
MANAGEMENT
1
2X-DAR CLIPS
DIFFUSER
BOARDTRAY
RETAINER CLIP
RETAINER CLIP SCREW
TRADITONAL HOUSING WITH
CT4-2XDAR
6
NA
POLYCARBONATE OR IMPACT
1
OPTICALLY CLEAR OR
FR50 FROSTED
1
4R / 095, 160
316 STAINLESS STEEL
4
NA
STEEL ZINC PLATED
4
NA
BOARDTRAY RETENTION CLIPS
METAL WHITE
16
NA
DRIVER TRAY (OPTIONAL)
SHEET METAL
1
*CT-SCRW-UGT
2 PER DRIVER
2 PER DRIVER
BALLAST ATTACHMENT
FLANGED NUT
2 PER DRIVER
GEARTRAY SAFETY TETHER
STAINLESS STEEL
2
NA
LATCHES
316 STAINLESS
1 BAG (12)
NA
ENDPLUG
1
NA
316 STAINLESS STEEL
4
NA
MOUNTING BRACKET
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT4
CITADEL 4 LED
GASKETED ENCLOSURE
LED
LED COMPONENTS:
CITADEL 4™ HOUSING: UL RATED COMPONENTS UL: E215168
MATERIAL
PART #
PACK
WT/CTN
SKID QTY
HOUSING
5VA-f1-FIBERGLASS (UL)
CT4-HV5-2H
10 PER CARTON
68LBS/ 30.84KG
90
HEAT MANAGEMENT
CT4-HV5-2H-BR
10 PER CARTON
68LBS/ 30.84KG
90
DESCRITPION
WATER CLEAR WITH
MATERIAL
PART #
PACK
WT/CTN
SKID QTY
CLEAR POLYCARBONATE
CT4-DP
10 PER CARTON
49LBS/ 22.22
90
FROSTED ENDS
CT4-DIRA
10 PER CARTON
47LBS/ 21.31
90
FROSTED LENS
FROSTED POLY CARBONATE
CT4-DP-FR50
10 PER CARTON
49LBS/ 22.22
90
CT4-DIRA-FR50
10 PER CARTON
47LBS/ 21.31
90
CITADEL 4™ LED BOARD TRAYS
DESCRITPION
*Boards Provided by Others
TYPICAL BOARD SIZE
4 ROWS
FINISH
FULL SKID QTY
FULL SKID WT.
4 ROWS OF 0.95" BOARDS
0.95"
CT4-LED-BT1-4R095
WHITE ENAMEL
360
2125LBS/963.88KG
1.60"
CT4-LED-BT1-4R160
WHITE ENAMEL
360
2125LBS/963.88KG
CITADEL 4™ LED DRIVER TRAY
*Drivers Provided by Others
DESCRIPTION
DRIVER ATTACHMENT RAIL
DRIVER ATTACHMENT RAIL CLIPS
OPTIONAL DRIVER TRAY "U" SHAPE FOR TWO DRIVERS
PART #
FINISH
FULL SKID QTY
FULL SKID WT.
CT4-2XDAR
WHITE ENAMEL
N/A
N/A
CT-2XDAR-CLIP
BLACK
N/A
N/A
CT-LED-DT-U
WHITE ENAMEL
N/A
N/A
CITADEL 4™ LED HARDWARE
DESCRIPTION
CITADEL LED BOARD TRAY RETENSION CLIP
CITADEL UNIVERSAL GEARTRAY SCREW
CITADEL GROUND WIRE
PART #
PACK
PCS/CTN
WT/CTN
CT-LED-BRC-SM
200
5000
N/A
CT-SCRW-UGT
200
N/A
N/A
CT4I-GND-15
100 PER BAG
2000
23LBS/10.43KGS
PART #
PACK
PCS/CTN
WT/CTN
CITADEL 4™ BALLAST ATTACHMENT HARDWARE
DESCRIPTION
*Only If Using Housing With A SLP Ballast Rail
CT4i-BAB
200
6000
49LBS/22.22KG
CT4i-BAFN
200
6000
37LBS/16.78KG
PART #
PACK
PCS/CTN
WT/CTN
CT4-LATCHSS
120 PER BAG
2400
48LBS/ 21.77KG
DESCRIPTION
CT4-MB
40 PER BAG
1200
17LBS/ 7.71KG
CEILING MOUNT
CT4-CM1.25
20 PER BUNDLE
400
64LBS/29.03KG
V-HOOK
CT4-VHOOK
20 PER BUNDLE
5000
453LBS/205.47KG
1/2" HUB OR 3/4" HUB
CT4-GTRC
40 PER BAG
1200
24LBS10.88KG
CT-SCRW
100 PER BAG
10,000
52LBS/23.58KG
CT-LT12
20 PER BAG
2000
11LBS/4.98KG
END PLUGS
CT-LT8
20 PER BAG
3000
14LBS/6.35KG
CT-ENDPLUG-B
200 PER BAG
2000
23LBS/10.43KG
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CITADEL 4i LED OEM COMPONENTS:
GASKETED ENCLOSURE
CT4i
LED
COMPONENTS FOR CT4I LED APPLICATIONS
Heat Management
BR Option
Requried For LED
Factory Installed
CT4 Flat Board Tray
CT4LED-BT1-4R (095,160,190)
LED Drivers
Supplied by Others
UL Wet Location
NEMA 4X
IP65
IP66
IP67
ROHS
DLC QLP
Additional
CT-LED-DT-U
Required if using
3 or more drivers
CT-LED-BRC-SM
LED Boards
Supplied By Others
CITADEL 4i Designed for Industrial Applications.
Highly Adaptable and Robust. Now Compatable
for LED Boards. NO TAPE OR SCREWS
•
Citadel 4 Housing With Heat Management Bar
•
Flat Board Trays Punched 4 Rows for use with
Typical 0.95" or 1.60" LED Boards
•
- 16 Clips for 4 Rows
•
Scratch Proof And Conductivity Inhibitor Coating On Clips
•
Lances Keeps Boards From Slipping Out of Position
•
Optional Driver Tray - needed if using (3+) drivers
Board Retention Clip:
Scratch Proof
Conductivity Inhibitor
Coating
Clip Design Works
for .060" To .084"
Overall Thickness
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CITADEL 4i LED OEM COMPONENTS:
GASKETED ENCLOSURE
CT4i
LED
COMPONENTS FOR CT4I LED APPLICATIONS
Heat Management
BR Option
Requried For LED
Factory Installed
CT4 Flat Board Tray
CT4LED-BT1-4R (095,160,190)
LED Drivers
Supplied by Others
Additional
CT-LED-DT-U
Required if using
3 or more drivers
CT-LED-BRC-SM
LED Boards
Supplied By Others
PIECES REQUIRED
PER ASSEMBLY
STANDARD MATERIAL
AVAILABLE OPTIONS
4'
HOUSING WITH
HEAT MANAGEMENT
DIFFUSER
BOARDTRAY
RETAINER CLIP
1
NA
1
OPTICALLY CLEAR OR
FR50 FROSTED
1
4R / 095, 160
STAINLESS STEEL
4
NA
STEEL ZINC PLATED
4
NA
METAL WHITE
16
NA
SHEET METAL
1
RETAINER CLIP SCREW
*CT-SCRW-UGT
2 PER DRIVER
2 PER DRIVER
BALLAST ATTACHMENT
FLANGED NUT
2 PER DRIVER
STAINLESS
2
NA
LATCHES
316 STAINLESS
1 BAG (12)
NA
ENDPLUG
1
NA
STAINLESS STEEL
4
ZINK PLATED
MOUNTING STRAP
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT4i
CITADEL 4i LED
GASKETED ENCLOSURE
LED
LED COMPONENTS:
CITADEL 4i HOUSING: UL RATED COMPONENTS UL: E215168
HEAT MANAGEMENT
MATERIAL
PART #
PACK
WT/CTN
SKID QTY
CT4i-HV5-BR
10 PER CARTON
68LBS/ 30.84KG
180
CITADEL 4I™ DIFFUSERS
DESIGN
WATER CLEAR WITH
FROSTED ENDS
PART #
PACK
WT/CTN
SKID QTY
CT4-DP
10 PER CARTON
49LBS/ 22.22
90
CT4-DIRA
10 PER CARTON
47LBS/ 21.31
90
CT4-DP-FR50
10 PER CARTON
49LBS/ 22.22
90
CT4-DIRA-FR50
10 PER CARTON
47LBS/ 21.31
90
FR50
FROSTED LENSES
MATERIAL
CLEAR POLYCARBONATE
CITADEL 4™ LED BOARD TRAYS
DESCRITPION
TYPICAL BOARD SIZE
4 ROWS
FINISH
FULL SKID QTY
FULL SKID WT.
0.95"
CT4-LED-BT1-4R095
WHITE ENAMEL
360
2125LBS/963.88KG
1.60"
CT4-LED-BT1-4R160
WHITE ENAMEL
360
2125LBS/963.88KG
CITADEL 4™ LED DRIVER TRAY
*Drivers Provided by Others *Only needed if using 3 or more drivers
DESCRIPTION
DRIVER TRAY "U" SHAPE FOR TWO DRIVERS
PART #
FINISH
FULL SKID QTY
FULL SKID WT.
CT-LED-DT-U
WHITE ENAMEL
N/A
N/A
PCS/CTN
WT/CTN
N/A
CITADEL 4™ LED HARDWARE
DESCRIPTION
CITADEL GROUND WIRE
PART #
PACK
CT-LED-BRC-SM
200
5000
CT-SCRW-UGT
100 PER BAG
10,000
N/A
CT4I-GND-15
100 PER BAG
2000
23LBS/10.43KGS
CITADEL 4™ BALLAST ATTACHMENT HARDWARE
DESCRIPTION
PART #
PACK
PCS/CTN
WT/CTN
CT4i-BAB
200
6000
49LBS/22.22KG
CT4i-BAFN
200
6000
37LBS/16.78KG
CT4i-LATCHSS
120 PER BAG
1800
59LBS/ 21.77KG
CT4i-LATCHW
120 PER BAG
1200
23LBS/10.43KG
CT4i-MS-SS
40 PER BAG
480
39LBS/ 7.71KG
CT4i-MS-ZP
40 PER BAG
480
35LBS/15.87KG
CT4i-MB-SS
20 PER BAG
20
17LBS/7.71KG
CT4i-MB-ZP
20 PER BAG
20
17LBS/7.71KG
CT4-CM1.25
20 PER BUNDLE
400
64LBS/29.02KG
CT4-VHOOK
20 PER BUNDLE
5000
453LBS/205.47
V-HOOK
1/2" OR 3/4" HUB
CT4-GTRC
40 PER BAG
1200
24LBS/ 10.43KG
47LBS/23.58KG
CT-SCRW
100 PER BAG
10,000
CT-LT12
20 PER BAG
2000
11LBS/4.98KG
CT-LT8
20 PER BAG
3000
14LBS/6.35KG
CT-ENDPLUG-B
200
3000
23LBS/10.43KG
END PLUGS
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
A Natural Progression:
PATENT PENDING
CITADEL 4S LED
CT4s
LED
CITADEL 4S™
Combination of the
Citadel 4™ & 4i™
Enclosures in a
SMALLER unit for tight
areas that need LED light.
Applications
Low Bay Areas that require
a smaller LED Enclosure
HALF THE SIZE
EASY LED BOARD INSTALLATION WITH CLIPS
Features & Benefits
• Compact Size
- 26.6” Long, 14.5” Wide, 5.8” Deep
• Designed for complete compatibility with LEDS
• Poured in place gasket & latches seal the enclosures
from hostile environments
• Familiar Economical Mounting Options Plus More
• Flat Board Trays for use with
- Typical 0.95” or 1.60” Boards
- Lances Keeps Boards From Slipping Out of Position
- Captive tray operates from either side
• New Lens Clips (Patent Pending)
NEW & FAMILIAR HARDWARE
•
•
•
•
•
- Scratch Proof And Conductivity Inhibitor Coating On
Clips
-Clip Design Works for .060” To .084” Overall
Thickness of Board
Separate Driver and LED Board Mounting Surfaces
Very tough diffusers resist breakage and reduce
replacement costs
- Water Clear or Full Frosted
Utilizes off the shelf 1/2” fittings
316 Stainless Hardware
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT4s
PATENT PENDING
LED
CITADEL 4S LED
Applications: Low Bay Areas that require a smaller LED Enclosure
PIECES REQUIRED
PER ASSEMBLY
STANDARD MATERIAL
AVAILABLE OPTIONS
2'
HOUSING
1
NA
SHEET METAL
1
NA
4 - BASIC DRIVERS
6 - FOR PENDANT MOUNT
NA
1
OPTICALLY CLEAR OR
FR50 FROSTED
1
4R / .095, .160
316 STAINLESS STEEL
4
NA
STEEL ZINC PLATED
4
NA
METAL WHITE
8
NA
SHEET METAL
1
CLIPS
DIFFUSER
BOARDTRAY
RETAINER CLIP
RETAINER CLIP SCREW
*CT-SCRW-UGT
LENS CLIPS
2 PER DRIVER
STAINLESS STEEL
2
NA
316 STAINLESS
IP Rating Design Intent:
IP65, IP66, IP69 - 10
clips
IP67 – 16 clips*
316 SS CAPTIVE LATCHES
ENDPLUG
MOUNTING STRAP
BULK
1
NA
316 STAINLESS STEEL
4
ZINC PLATED
1
NA
GROUND WIRE
Performance:
Delivered lumen and temperature packages
14,000lm at 25C (comparison CT4-GT-4LT5)
Ratings & Listings
• Components Tested & Certified
by NSF International
• UL Rated Components
• UL Wet Location
- UL evaluated for 25° & 40° C
ambient temperatures
• NEMA 4X
•
•
•
•
•
•
•
IP65
IP66
IP67
IP69
ROHS
SLP Guardian Seal
5VA (f1) housing
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT4s
PATENT PENDING
LED
CITADEL 4S LED
CITADEL 4S HOUSING: UL RATED COMPONENTS UL: E215168
HOUSING
MATERIAL
PART #
PACK
CT4S-HV5
10
WT/CTN
SKID QTY
90
CITADEL 4S™ DIFFUSERS
DESIGN
WATER CLEAR
MATERIAL
PART #
PACK
CLEAR POLYCARBONATE
CT4S-DP
10 PER CARTON
WT/CTN
SKID QTY
90
CT4S-DIRA
10 PER CARTON
90
CT4S-DP-FR50
10 PER CARTON
90
CT4S-DIRA-FR50
10 PER CARTON
90
FR50 FROSTED LENSES
CITADEL 4S™ LED BOARD TRAYS
DESCRITPION
TYPICAL BOARD SIZE
4 ROWS
FINISH
0.95"
CT4S-LED-BT1-4R095
WHITE ENAMEL
1.60"
CT4S-LED-BT1-4R160
WHITE ENAMEL
CITADEL 4S™ LED DRIVER ATTACHMENT RAIL
DESCRIPTION
DRIVER ATTACHMENT RAIL CLIPS
FULL SKID QTY
FULL SKID WT.
*Drivers Provided by Others
PART #
FINISH
PCS/CTN
WT/CTN
CT4S-2XDAR
WHITE ENAMEL
4000
44LBS/19.95KG
CT-2XDAR-CLIP
CITADEL 4S™ LED HARDWARE
DESCRIPTION
CITADEL GROUND WIRE
CITADEL 4S™ HARDWARE
STAINLESS STEEL LENS CLIP
PART #
PACK
PCS/CTN
WT/CTN
CT-LED-BRC-SM
200 PER BAG
5000
N/A
CT-SCRW-UGT
100 PER BAG
10,000
N/A
CT4I-GND-15
100 PER BAG
2000
23LBS/10.43KGS
PART #
PACK
PCS/CTN
WT/CTN
CT4S-LC
200 PER BAG
7000
51LBS/23.13KG
STAINLESS STEEL CAPTIVE LATCH
CT4S-LATCHSS
200 PER BAG
1600
50LBS/22.67KG
WHITE CAPTIVE LATCH
CT4S-LATCHW
200 PER BAG
2000
CT4S-MS-SS
40 PER BAG
480
29LBS/13.15KG
CT4S-MS-ZP
40 PER BAG
480
29LBS/13.15KG
CT4-CM1.25
20 PER BUNDLE
400
64LBS/29.02KG
V-HOOK
CT4-VHOOK
20 PER BUNDLE
5000
453LBS/205.47
CT4S-MB
20 PER BUNDLE
1/2" HUB
CT-DCB-50
200
30LBS/13.6KG
3/4" HUB
CT-DCB-75
100
20LBS/9.07KG
CT4-GTRC
40 PER BAG
1200
24LBS/ 10.43KG
CT-SCRW
100 PER BAG
10,000
47LBS/23.58KG
CT-LT12
20 PER BAG
2000
11LBS/4.98KG
MOUNTIN BRACKET
END PLUGS
CT-LT8
20 PER BAG
3000
14LBS/6.35KG
CT-ENDPLUG-B
200 PER BAG
3000
23LBS/10.43KG
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
ENCLOSURE
REPLACEMENT PARTS
CITADEL 1™
CITADEL 2™
CITADEL 4™
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT1
CITADEL 1™
GASKETED ENCLOSURE
FLUORESCENT:
Kits and Individually Packed
Citadel 1™ The traditional damp and wet location enclosure for T5,
T8 or T12 lamps. A strip fixture is mounted inside the fiberglass
housing paired with an Acrylic impact reistant lens creating a weatherproof enclosure with easy to clean exterior surfaces. Inside the
housing brass studs and knockouts match the strip KO locations.
Shallow Kit
• Shallow 2-1/2”(63,5mm) Lens
- Injection Molded
- Matte Stipple Finish
• 4ft and 8ft lengths
• Plastic Celcon Latches
• Studs on Center
CITADEL 1™ SHALLOW KITS
EACH KIT INCLUDES A LENS, HOUSING AND LATCH BAG
KITS
(BULK)
DESCRIPTION
PART #
4’ HOUSING WITH 4’ X 2.5” DEEP INJECTION MOLDED LENS
CT1-2L4-IM-2.5-KT
8’ HOUSING WITH 4’ X 2.5” DEEP INJECTION MOLDED LENS
CT1-2L8-IM-2.5-KT
4’ HOUSING WITH 4’ X 2.0” DEEP VACUUM FORMED LENS
CT1-2L4-VF-2.0-KT
Available in Increments of 30
INDIVIDUALLY
PACKED
4’ HOUSING WITH INJECTION MOLDED LENS
CT1-2L4-IM-2.5-IP
8’ HOUSING WITH INJECTION MOLDED LENS
CT1-2L8-IM-2.5-IP
4’ HOUSING WITH 4’ X 2.0” DEEP VACUUM FORMED LENS
CT1-2L4-VF-2.0-IP
2 ENDPLUGS PER LATCH BAG
Deep Kit
• Deep 3”(76,2mm) Lens
- Vacuum Formed
- Matte Stipple Finish
• 4ft and 8ft lengths
• Plastic Celcon Latches
CITADEL 1™ DEEP KITS
EACH KIT INCLUDES A LENS, HOUSING AND LATCH BAG
DESCRIPTION
PART #
KITS
(BULK)
4’ HOUSING WITH 4’ X 3” DEEP VACUUM FORMED LENS
CT1-2L4-VF-3.0-KT
CT1-2L8-VF-3.0-KT
INDIVIDUALLY
PACKED
CT1-2L4-VF-3.0-IP
CT1-2L8-VF-3.0-IP
Available in Increments of 30
2 ENDPLUGS PER LATCH BAG
Injection Molded Lens:
Vacuum Formed Lenses:
Shallow:
Deep:
Lens 7.25”/184,2mm
Lens 7.25”/184,2mm
Lens 7.25”/184,2mm
Housing 7.5”/190,5mm
2.75”
69,9mm
2.75”
69,9mm
2.75”
69,9mm
2.5”
63,5mm
2”
50,8mm
3”
76,2mm
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT1
CITADEL 1™
GASKETED ENCLOSURE
FLUORESCENT:
Components
Housing:
Injection Molded Lens:
Vacuum Formed Lenses:
Lens 7.25”/184,2mm
2.75”
69,9mm
Lens 7.25”/184,2mm
Lens 7.25”/184,2mm
2.5”
63,5mm
3”
76,2mm
2”
63,5mm
CITADEL 1™ HOUSINGS AND LENSES
ACTUAL
LENGTH
HOUSINGS 49.875"
97.75"
49.875"
LENSES
97.75"
49.875"
49.875"
97.75"
DEPTH
2.75"
2.75"
2.5"
2.5"
2”
3"
3”
1
DESCRIPTION
MATERIAL
NO BRASS STUD ON BACK
NO BRASS STUD ON BACK
INJECTION MOLDED
INJECTION MOLDED
VACUUM FORMED
VACUUM FORMED
VACUUM FORMED
FIBERGLASS
FIBERGLASS
2
3
PART #
Carton
QTY
CT1-HFNS-2L4
30
CT1-HFNS-2L8
60
CT1-DAIM-2.5-2L4-M
28
CT1-DAIM-2.5-2L8-M
15
CT1-DAVF-2.0-2L4
30
CT1-DAVF-3.0-2L4
20
CT1-DAVF-3.0-2L8
24
5
4
LATCHES*
DESCRIPTION
PART #
WHITE PLASTIC TOGGLE (1)
CT1-LP-W-BAG
CT1-LSS
STAINLESS STEEL (2)
8 LATCHES ARE REQUIRED PER 4’ HOUSING / 14 PER 8’ HOUSING
CT1-MB-2L-2
MOUNTING EXTERNAL MOUNTING BRACKET (3)
BUSHINGS
ENDPLUGS
(4)
(5)
PCS/CTN
1500
CT1-DCB
100
CT-ENDPLUG
3000
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT2
CITADEL 2™
GASKETED ENCLOSURE
DIFFUSERS AND OPTICALLY CLEAR LENS
Before and After
• Very tough diffusers resist breakage to reduce
replacement and maintenance costs.
• 4 and 8 Foot Lengths
• 3.62” and 6.40” Wide
Steps:
Optically Clear Lens for the Citadel 2™
• Designed Specifically for use
with Reflectors
• Injection Molded with
100% Impact Resistant
Acrylic
• 4 and 8 Foot Lengths
• Deep Lens
• Integral Posts for Lens
Safety Tether
• Frosted ends
• SLP Exclusive Guardian Seal™
1. Remove existing diffuser and lamps
3. Pop your lamps back into place
2. Attach a New Basic or Wide Reflector
to the existing geartray
4. Place New LIRA Optically Clear
Lens on fixture and latch closed.
Lenses and Diffusers Available in FR50™ Frosted
WIDTH
NARROW
(1 LAMP)
WIDE
(2 OR 3
LAMP)
LENGTH
DESIGN
MATERIAL
POLYCARBONATE
PART NO. FOR
CLEAR
PART NO. FOR
FR50™ FROSTED
PCS/CTN
WT/CTN
FULL SKID
QTY.
CT2-DP-1L4
CT2-DP-1L4-FR50
30
25LBS/11,3KG
180
30
25LBS/11,3KG
180
240
4’
LINEAL RIBBED
4’
LINEAL RIBBED
CT2-DIRA-1L4
CT2-DIRA-1L4-FR50
4’
SMOOTH
CT2-CIRA-1L4
CT2-CIRA-1L4-FR50
4'
SMOOTH
POLYCARBONATE
CT2-CP-1L4
CT2-CP-1L4-FR50
2’
LINEAL RIBBED
POLYCARBONATE
CT2-DP-2L2
CT2-DP-2L2-FR50
20
22LBS/9,97KG
2'
LINEAL RIBBED
CT2-DIRA-2L2-FR50
20
21LBS/9,5KG
2'
DEEP
4’
LINEAL RIBBED
POLYCARBONATE
4’
LINEAL RIBBED
4’
CT2-DIRA-2L2
240
CT2-LIRA-2L2-FR50
10
CT2-DP-2L4
CT2-DP-2L4-FR50
20
21LBS/9,5KG
240
CT2-DIRA-2L4
CT2-DIRA-2L4-FR50
20
38LBS/17,2KG
240
SHALLOW
CT2-CIRA-2L4
CT2-CIRA-2L4-FR50
20
240
4’
SHALLOW
POLYCARBONATE
CT2-CP-2L4
CT2-CP-2L4-FR50
20
240
4’
DEEP
CT2-LIRA-2L4
CT2-LIRA-2L4-FR50
20
50LBS/22,6KG
240
8'
LINEAL RIBBED
CT2-DIRA-2L8
CT2-DIRA-2L8-FR50
10
40LBS/18.14KG
240
8'
DEEP
CT2-LIRA-2L8
CT2-LIRA-2L8-FR50
10
48LBS/21.7KG
120
CT2-LIRA-2L2
180
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT2
CITADEL 2™
GASKETED ENCLOSURE
Mounting is a snap with the Citadel 2™ Stainless Steel
mounting brackets. No holes
through the housing!
LATCH INSTALLATION
STAINLESS STEEL
Patented
SECURE LOCKING PLASTIC
- White POM
- Clear Polycarbonate
Latches
MATERIAL
PART #
PCS/CTN
STAINLESS
CT2-LATCHSS
BAG OF 200
4’ WITH ENDPLUGS
STAINLESS
CT2-LATCH4SS
175
37LBS/16,9KG
8’ WITH ENDPLUGS
STAINLESS
CT2-LATCH8SS
100
35LBS/15,9KG
CITADEL 2 CLEAR PLASTIC LATCH
POLYCARBONATE
CT2-LATCHCC
BAG OF 200
4’ WITH ENDPLUGS
POLYCARBONATE
CT2-LATCH4CC
100
8’ WITH ENDPLUGS
POLYCARBONATE
CT2-LATCH8CC
80
WT/CTN
Secure Locking Plastic LATCH
ACETAL COPOLYMER
CT2-LATCHW
BAG OF 200
STAINLESS STEEL
CT2-MB-1L
250
9LBS/4,1KG
STAINLESS STEEL
CT2-MB-2L
250 & 500
12LBS/5,4KG
18KLBS/8,2KG
STAINLESS STEEL
CT2-MB-2L-2
250
STAINLESS STEEL
CT-BAIL
5600
27LBS/12,2KG
CT-RC
1000 & 2800
16LBS/7,3KG
41KLBS/18,6KG
CT-SCRW
100
52LBS/23,6KG
CT-ENDPLUG
2000
22LBS/10KG
CT-SST
10,000
17LBS/7,7KG
CT-LT12
2000
17LBS/7,7KG
GASKET AND SHIM (100 PER BAG)
CT-DA5
1000
MOUNTING
BRACKETS
ENDPLUGS
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT2R
CITADEL 2™
REFLECTORS
Reflectors for the Citadel 2™ Housing
Two Reflector Designs: Basic and Wide Distribution
Both with Enhanced Specular Finish - Minimum 92% Reflectivity
For use with T5 and T8 Lamps
Basic Reflector:
Wide Distribution Reflector:
* Basic Reflector for use with a shallow or deep lens.
* Reflector is a 2 piece assembly.
Citadel 2 Housing
Geartray
Basic Reflector
*
Wide Distribution
Reflector
DIRA Lens
LIRA Lens
Product Part Number
Basic
Wide
Quantity Required
Compatible with SLP’s
Per Enclosure
Length 2 Foot 4 Foot 8 Foot DIRA Lens LIRA Lens
CT2-RF-2L2-B 21.0"
CT2-RF-2L4-B 44.5”
CT2-RF-2L4-W 44.5”
1
1
2
2
4
√
√
√
√
Carton
QTY
Carton
Weight
750
375
320
180
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT4
CITADEL 4™ & 4i™
GASKETED ENCLOSURE
Lenses, Latches, Mounting and Reflectors:
Stainless latches to seal the enclosure from the most hostile environments.
Economical mounting hardware. Optional reflectors for narrow
beam distribution. 100% impact resistant acrylic for maximum light
transmission and longevity, or UV stabilized polycarbonate for
temperature extremes and maximum impact resistance.
Protective Film is placed on the lens to prevent scratching
during shipping and installation. Colors distinguish the
lens material.
Clear Film: Acrylic Lens
Blue Film: Polycarbonate Lens
DESIGN
WATER CLEAR WITH
MATERIAL
PART #
PACK
WT/CTN
SKID QTY
CLEAR POLYCARBONATE
CT4-DP
10 PER CARTON
49LBS/ 22.22
90
FROSTED ENDS
CT4-DIRA
10 PER CARTON
47LBS/ 21.31
90
FROSTED LENS
CT4-DP-FR50
10 PER CARTON
49LBS/ 22.22
90
CT4-DIRA-FR50
10 PER CARTON
47LBS/ 21.31
90
CITADEL 4™ & 4i HARDWARE
PART #
PACK
PCS/CTN
WT/CTN
CEILING MOUNT
DESCRIPTION
CT4-CM1.25
20 PER BUNDLE
400
64LBS
V-HOOK
CT4-VHOOK
20 PER BUNDLE
5000
453LBS
CT4-GTRC
40 PER BAG
1200
24LBS
52LBS/23.58KG
UNIVERSAL GEARTRAY BALLAST SCREWS
END PLUGS
CT-SCRW
100 PER BAG
10,000
CT-SCRW-UGT
100 PER BAG
10,000
CT-LT12
20 PER BAG
2000
11LBS
CT-LT8
20 PER BAG
3000
14LBS
CT-ENDPLUG-B
200 PER BAG
2000
23LBS
CITADEL 4™ & 4i REFLECTORS
LAMP CONFIGURATION
FINISH
PART #
4 LAMPS
SPECULAR ALUMINUM
CT4-RF-4L-U
6 LAMPS
SPECULAR ALUMINUM
CT4-RF-6L-U
FULL SKID QTY
FULL SKID WT.
2160
200
3240
290
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
CT4
CITADEL 4™ & 4i™
GASKETED ENCLOSURE
Latches & Mounting Hardware:
Stainless latches to seal the enclosure from the most hostile environments. Economical mounting hardware.
Optional reflectors for narrow beam distribution.
DESCRIPTION
PCS/CTN
WT/CTN
120 PER BAG
2400
48LBS/ 21.77KG
40 PER BAG
1200
17LBS/ 7.71KG
PART #
PACK
PCS/CTN
WT/CTN
CT4i-LATCHSS
120 PER BAG
1800
59LBS/
21.77KG
CT4i-LATCHW
120 PER BAG
1200
23LBS
CT4i-MS-SS
40 PER BAG
480
39LBS/ 7.71KG
CT4i-MS-ZP
40 PER BAG
480
35LBS
CT4i-MB-SS
20 PER BAG
20
17LBS
CT4i-MB-ZP
20 PER BAG
20
17LBS
CT4i-GND-15
100 PER BAG
2000
23LBS
CT4i-BAB
200
6000
49LBS
CT4i-BAFN
200
6000
37LBS
PART #
PACK
CT4-LATCHSS
CT4-MB
CITADEL 4i HARDWARE
DESCRIPTION
GROUND WIRE
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
Index
TERMS & CONDITIONS
FREIGHT POLICY
RETURN POLICY
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
General Terms & Conditions
Payment Terms:
Skid Charges:
Transportation:
Prices:
Net 30 days from date of invoice, with
approved credit.
FOB shipping point. Freight charges collect
and service charges will be added for prepaid
& additional freight charges. Fuel surcharges
will be added to all prepaid orders. Small
orders shipping UPS will have a UPS packing
charge added to the invoice.
Shipping locations that do not have a dock
such as job sites or residential may receive an
additional charge involved by all the
carrier’s. Charges vary by carrier.
Returned Goods:
Request for return must be made in writing
within 7 days of receipt of goods.
Merchandise can not be returned without
prior written authorization from SLP. All returns
must be freight prepaid.
All returns must be via the carrier designated
by SLP when freight is prepaid by SLP. Credit
for returned goods is subject to our count and
inspection less a 25% restocking charge.
Custom order, fabricated and parts cut from a
greater size panel are not eligible for return.
Orders:
Are accepted are subject to material availability, fire, strikes, accident and other delays
beyond our control.
Aluminum Broken Carton
Charge:
There will be a $35.00 broken carton charge
when full box quantities are not ordered.
There will be an extra $5.00 charge for heat
treated skids
Predicated on standard package quantities
and subject to change without notice.
Prices for blanket orders are subject to
change without notice.
Minimum Order:
$250.00 Excluding freight and/or labor
charges.
$20.00 Packing charge applies to ALL orders
sent via UPS ground or FedEx Express except
hardware.
Tolerances:
Standard tolerances for cut, fabricated and
sheared parts are +/-1/16”.
Thickness of extruded sheet is +.005” And
-.010”.
Warranty:
Products are warranted to be free of
manufacturing defects for a period of one (1)
year from date of shipment. SLP's liability is
expressly limited to a credit refund of the cost
of the defective part or a no charge
replacement of like material at our option.
Product:
SLP reserves the right to make modifications
to product design and changes to the product
offering without notice.
Remit to Address:
SLP Lighting
P.O. Box 840116
Kansas City, MO 64184
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
FREIGHT POLICY
1) Upon Delivery of Shipment
a. Visually inspect all cartons for damage and verify carton quantities and skid quantities.
i. Note any damage to any carton on the Delivery Reciept. Only write that there is damage. Do not
speculate to as why there is damage or how the damage happend.
(Example: one carton damaged)
ii. Note any missing cartons or skids on Delivery Receipt
iii. If shipment is received without plastic banding and shrink wrap, your shipment may not be
complete or may be damaged.
b. Put all damaged boxes and parts to the side until carrier has inspected them. If possible, take photos of
the damages and keep in original packaging.
c. Do Not let the drivertalk you into signing or checking areas. If you sign the wrong area, we may not be
able to issue credit.
d. If shipment is totally destroyed, refuse it.
If all of the above has been followed, there is a better chance of getting full credit for the damaged material. SLP will not issue credit, until the carrier has paid us for the claim.
2) Concealed Damage
a. If concealed damage is found, immediately call freight line to report damage. Get name of contact at
shipping line and terminal damage was reported to. This helps SLP expedite the claim.
b. You have 7 days from date of delivery to contact SLP Lighting
c. Be sure to put all damaged boxes and parts to the side until carrier has inspected them. If possible,
keep in original packaging.
SLP can ONLY give a maximum of 1/3 shipment value for concealed damage.
3) Collect Shipments
On any orders that ship collect, the customer will have to file a claim with their carrier for damaged goods
to get reimbursed. SLP will NOT issue a credit.
4) Other Delivery or Service Charges
Lift Gate/Notify (call) customer/ Inside / Residential / Redelivery / Forklift / Heat treated pallets / etc.
a. If a lift gated is needed, please indicate at time of order.
b. If a delivery notification is needed, please indicate at time of order.
c. There will be a $5 charge for all heate treated pallets
d. Shipping locations that do not have a dock such as Job Sites or Tesidential recieve an additional charge
involved by all the carrier's.
Customer is responsible for all additional Accersorial Fees charged by the Carrier such as, but not limited to:
Camps, Carnivals, Fairs,Chautauquas, Churches, Mosques, Synagogues, Temples, Schools (not including
colleges and universities), Colleges and Universities without a dock, Medical/Urgent care sites without a dock,
Military Bases & Installations, Prisons/Correctional Facilities, Constructions Sites, Individual / Mini Storage
Units, Mine Sites, Golf Courses, Country Clubs, Nuclear Power Plants, Parks, Farms, Ranches, Indian
Reservations, Court houses, Day cares, Hotels, Motels, Retirement/Nursing Homes, Restaurants, Cemeteries,
Convents, Outdoor flea markets. Charges may vary by carrier.
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016
RETURN POLICY
Returns:
Special sizes, fabricated goods and parts cut from a greater size part will not be acceptable for
return. No merchandise will be accepted for return without written permission. Request for return
must be made within 7 days from date of shipment.
When authorization is given, material must be returned within 7 days from date of authorization or
authorization is invalid. Return shipments must be pre-paid.
Credit issued will be subject to 25% restocking charge less any costs necessary to make material
salable.
SLP LIGHTING
PHONE: 636.600.4084 | 800.248.0224
FAX: 636.600.4108
www.slplighting.com
V07052016

Complete SLP Ordering Guide

Transcription

Similar documents

replacement wraparound lenses