Avmor`s Floor Care Training Guide

Avmor’s Floor Care Training Guide
Floor Preparation & Floor Stripping
Floor Sealing & Floor Finishing
Daily Cleaning
Floor Maintenance
Top Scrub & Recoat
Product Listing
Avmor’s Green Floor Care Solutions
Floor Preparation & Floor Stripping
Floor Preparation
Remove furniture
and clean the floor
1
Proper floor stripping is an important step
in the procedure of professional floor care
maintenance. Avmor manufactures many types
of floor strippers that complement all floor
care systems and floors.
REQUIRED EQUIPMENT
2
3
If there is a section with
floor finish that you do
not want to strip then
tape those areas.
Pick-up debris and shake
or vacuum and roll up
walk-off mats.
1. Wet Floor Sign 2. Dust Mop and Vacuum
3. Putty Knife 4. Dust Pan and Brush
5. Gator Shoes
6. Measuring jug
7. Black or Brown Pads 8. Mop Buckets
5
4
9. Single Disc Floor Machine
Place ”WET
FLOOR“ signs.
10. Wet Mops and Wringers
11. Gloves and Glasses
12. Tape 13. Watch
Mix AVMOR stripper
as directed.
6
Put on Personal
protective equipment.
14. Garbage Bin 15. Floor Scraper on Long Handle
16. Doodle Bug with Black Pads
17. Autoscrubber 18. Wet Vacuum
Stripping
19. pH Measuring Kit
Spray baseboard cleaner on
baseboards and vertical surfaces
and wipe clean. Use a putty knife
to scrape up all gum and other
adhesives
7
8
9
Flood stripper onto
manageable 10’ x 10’
(3.048 m x 3.048 m)
areas of the floor.
10
Let dwell for 5-10
minutes. Keep the
stripper wet and do
not let air dry.
Scrub in both directions
with a clean black pad.
Flip or change pads
as required.
Rinsing
EP64
Required Products
Zip Strip
Big
Bruiser
EP83
Viper
12
Tips & Tricks
Pick up dirty solution
with wet vacuum, mop
or autoscrubber.
13
Using pH test kit
confirm pH of floor.
Repeat # 14, if
needed.”
Stripping Products: Zip Strip, Viper, EP83,
Neutralizing Product: Rotex, Caprice, EP64
14
Rinse floor thoroughly
with clean cold water.
Use neutralizer if required.
Gum Remover: Exit2
Baseboard Cleaner: Big Bruiser
Rotex
1
Exit 2
Caprice
Apply AVMOR stripper to
edges. Let dwell. Scrub
with black doodle bug.
11
• If the pH is not between 7 and 9, thoroughly rinse
your floor again. Pick up with wet pick up vacuum.
• Use stripping mops only for stripping.
• Do not let dirty solution dry onto floor.
• Do not splash stripping solution onto surfaces such as
doors, walls, cabinets. If you do wipe with a clean
cloth or wiper.
• Measure humidity in porous floors, such as linoleum,
to secure that the floor material is dry.
• Allow floor to dry completely before applying sealer
and finish.
• Use an old section of the walk off matting to place
equipment (buckets, floor mops) in order to help keep
area clean.
www.avmor.com
2
Floor Sealing and Floor Finishing
Avmor’s exclusive line of thermoplastic acrylic
and urethane fortified finishes manufactured
with Avmor’s advanced polymer technology
was formulated to guarantee high quality floor
finishes and sealers that provide excellent
shine, improved long lasting protection,
durability and slip resistance.
Floor Sealing & Floor Finishing
REQUIRED EQUIPMENT
1
1. Wet Floor Sign
2. Dust mop
3. Putty knife
4. Dust Pan & Brush
5. Mop Buckets (2)
6. Finish Mop
7. Wringer
8. Garbage bags
9. Gloves and Glasses
10. Floor Fan
11. Watch
12. Measuring Kit
2
Verify that the floor
is dry, clean, and that
all old finish has been
removed.
Place a black garbage
bag inside a clean mop
bucket and fill with
Avmor sealer or finish.
3
Place “Wet Floor” signs.
4
Saturate the mop head and
then wring out until you
have the desired amount of
finish on your finish mop.
6
5
Complete the entire floor
area. Allow to dry between
each coat. After 10 minutes
turn on floor fans. Angle
floor fans upward.
Edge a 10FT x 10 FT (3.048 m
x 3.048 m) section. Apply
Avmor sealer or finish using
the figure 8 mopping method.
7
8
Measure that you have
achieved the desired
result.
Apply additional coat(s) of
sealer or finish depending
on desired level of
protection and gloss.
Tips & Tricks
•
•
•
•
•
•
PROFILE PLUS
PROTECTION
DAZZLER DISTANCE
Required Products
SEALERS: LOKSEAL, Thermothane, EP80
THERMOTHANE
LOKSEAL
Sealer Finishes: Acra-Lok, Venture
Finishes: Dazzler, Distance, Profile Plus, Protection,
EP80, W-75 and Sidekick Vitaminizer
EP80 ACRA-LOK
3
Sidekick
VENTURE
W-75 Vitaminizer
Apply Avmor sealer before Avmor floor finish when it is needed.
Only apply 1st coat of sealer and last coat of finish to the edges due to far less traffic.
Always allow 10 minutes drying time per coat before using a floor fan.
Do not pour unused finish back into container.
Always use the special finish mop, a cotton/rayon blended mop or a microfiber mop.
Always make sure the wringer is very clean.
• When you are finished sealing, discard the plastic garbage bag and install a new one. Be sure to thoroughly
rinse mop clean.
• Longer drying time could be due to high air humidity. Do not apply sealer or finish without the proper method.
• If mop begins to drag turn the mop over to the opposite side and repeat.
• Always use clean equipment, mops & pads.
• For instructions on the Figure 8 Method, visit www.avmor.com.
• Measure your initial gloss with a gloss meter to ensure you got the desired result.
www.avmor.com
4
Daily Cleaning
Dry Cleaning
1
Avmor offers a complete line of high
quality floor cleaners and restorers for
daily cleaning. You can select the floor
care system that best meets your needs.
Prepare your
equipment.
Always use
a clean dust
mop, a clean
wet mop and
clean pads.
REQUIRED EQUIPMENT
1. Wet Floor Sign 2. Gloves and Glasses
3. Measuring Cup / System
Prepare and inspect the area
you have to
clean and clear
any clutter.
2
3
Thoroughly vacuum
all walk on/off
entrance mats.
4. Vacuum Cleaner 5. Dust Mop
6. Putty Knife 7. Dust Brush
Place
“Wet Floor” signs.
Dust mop floor, pick-up debris
and remove gum and other
adhesives with a putty knife.
4
8. Dust Pan 9. Garbage Can
10. Automatic Vacuum Sweeper
5
Clean open floor
area with automatic vacuum,
pick-up debris
and remove
gum and other
adhesives.
and
11. Autoscrubber
12. Blue/Red Pads or Brushes
6
13. Wet Mop System
Manual Wet Cleaning
1
Put on protective
clothing.
2
Mix desired Avmor
floor cleaner as
directed.
3
Verify the
cleaning plan
for pads,
chemicals and
dilutions.
5
Using a clean mop;
mop floor using the
figure 8 method.
Prepare your clean
mops for today’s
work.
7
6
Caprice
Required Products
Cleaners: Rotex, SolNet,
EP64, EP65, Caprice,
A707 Topscrub,
Buffalo Shine
A707
Topscrub
Rotex
Solnet
EP64
EP65
3
Daily: Clean and turn
scrubbing pads. Clean
squeegee and vacuum
filter. Empty both
solution tanks.
4
Scrub the floor with
overlapping passes.
8
Clean all equipment thoroughly,
store ready for
next use.
Tips & Tricks
2
Buffalo
Shine
5
Fill autoscrubber with fresh water
and add correct amount of chemical. Verify that the pad/brush and
squeegee are clean and put them
on the autoscrubber.
Change mop and mop water
regularly when dirty.
Pay attention
to edges
and around
fixtures.
Automatic Scrubbing
1
4
Plug in the
autoscrubber to be
recharged. Verify
battery weekly.
• With floors that have floor finish, use a neutral cleaner
or a cleaner that does not have a pH higher than the
floor finish.
• Follow the floor cleaning system and the cleaning plan.
Always measure and follow the indicated dilutions.
• For non finished floors or difficult cleaning applications
use an alkaline cleaner.
• Proper floor cleaning includes under the mats.
Roll them up when wet cleaning.
• Dirt comes into the building just as easily as people do.
Pay particular attention when cleaning all entrances.
• Always use clean pads, mops and equipment to avoid the
gradual build-up of dirt on your floor & in your floor finish.
• Pay attention to high traffic lanes and frequently remove
marks on the floor.
www.avmor.com
6
Floor Maintenance
Restoring
Avmor’s unique floor care maintenance
treatments complement all types of
floor finish.
They repair scratches, protect against
scuff marks and secure the gloss and
protection you want.
1
REQUIRED EQUIPMENT
2
Verify that the
floor is clean
before you apply
restorer.
1. Burnisher/Buffer (Electric, Battery, Propane)
2. Burnishing Pads
Once dust
mopping and
cleaning is
completed apply
Avmor restorer
to floor using an
autoscrubber or
mop on process.
Let dry before
burnishing .
Check the floor and
check the maintenance schedule.
If required apply
Avmor floor restorer.
3. Measuring Cup/System
4. Spray Accessories
5. Dust Mop
High Speed or Ultra High Speed ( UHS ) Burnishing
6. Wet Floor Sign
7. Mop Bucket & Wringer
Once dust mopping
and cleaning is
completed put the
appropriate floor
pad on the machine.
1
8. Finish Mop
3
Starting along the baseboard at the furthest
point from the door, push High Speed or Ultra
High Speed (UHS) machine forward moving in
a straight line and overlapping last pass.
4
2
Prepare your burnisher and
mount appropriate clean
burnishing pad to machine.
5
Once dust mopping and
cleaning is completed
prepare your spray buff
solution.
1
Snap Back
Sidekick
Vitaminizer
EP80
When burnishing, do not stay on the same
area too long.
Turn or change pads as
required. Burnish the
floor to desired gloss.
Spray Buffing
Dust mop floor
and verify that
you have achieved
the desired result.
6
Tips & Tricks
Use a red or white pad on
a rotary buffing machine
(up to 800 rpm).
2
• Always dust mop and clean prior to
burnishing to avoid scratches on floor
surface.
• Be sure to use the correct Ultra High
Speedpads with in-line burnisher
(800 rpm to 3500 rpm).
Buffalo Shine
Required Products
• Check for dust after burnishing, it may be
necessary to dust mop.
Spray Buff: Snap Back
Restorer/Maintainer: Sidekick Vitaminizer,
EP80
3
3
Start in a 3’ x 3’ area.
Lightly spray AVMOR spray
buff solution and move
machine over sprayed area
until dry and buffed.
4
Turn or change
pads as required.
Buff floor to a
high shine.
• Always use clean equipment, mops & pads.
• Clean your burnishing pads and equipment
after each use.
Floor Cleaner/Maintainer: Buffalo Shine
7
www.avmor.com
8
Top Scrub & Recoat
Floor Preparation
A deep scrub removes soil in the top layer
of the floor finish and prevents dirt from
being trapped between recoats. If the floor
dulls quickly after spray buffing or high
speed buffing, it is normally a symptom of
thinning and/or soiled floor finish. This
condition requires a deep scrub and recoat.
1
REQUIRED EQUIPMENT
1. Wet Floor Sign
2. Gloves and Glasses
3. Measuring Cup/System
4. Dust Mop and Vacuum
5. Putty Knife
6. Dust Pan, Brush and Bin
7. Tape
8. Doodle Bug with Black Pads
9. Autoscrubber or single disc floor machine
10. Wet Vacuum and Squeegee
11. Blue, Green or Black Pads
12. Plastic Bag
13. Finish Mop
14. Measuring Kit
Remove furniture
and clear the floor.
Dust mop entire floor and
remove gum and other
adhesives.
2
4
Place “Wet
Floor” signs.
Top Scrubbing Option #1:
7
8
Flood the floor with
solution. Allow to dwell
for 5 to 10 minutes.
10
Solnet
7
Rinse by damp mopping
thoroughly with clean cold
water. Using pH test kit
confirm pH of floor.
EP65
Required Products
Deep Scrub Products: A-707 Top Scrub,
EP65, Solnet
9
Neutralizer: Rotex, EP64
Baseboard Cleaner: Big Bruiser
A-707 Top Scrub
9
Rotex
Big Bruiser
Apply solution to
floor. Scrub floor, do
not pick up solution,
allow to dwell for 5
minutes.
Flip or change pads as required.
On second pass, scrub floor with
squeegee down and vacuum on
to pick up dirty solution.
Auto Scrubbing
Scrub the floor
with desired pad,
squeegee up,
double pass and
vacuum turned
off.
8
6
Mix AVMOR top
scrubbing solution
with water.
Rotary Scrubbing
Place black, blue or green
pad on machine and scrub to
remove top layer of old finish.
Top Scrubbing Option #2:
EP64
Put on Protective
Clothing.
5
If there is a section
that you do not want
to top scrub then
tape those areas.
3
10
Rinse by damp mopping or autoscrubbing
with red pad and clean water. Using pH
test kit confirm pH of floor. Apply desired
number of coats of Avmor Floor Finish.
Follow procedure on page 4.
9
Flip or change pads
as required. Pick up
dirty solution with
wet vacuum.
11
Apply desired number of
Avmor coats of Avmor Floor
Finish. Follow procedure on
page 4 (Floor Sealing and
Floor Finishing).
Tips & Tricks
• Floor must be thoroughly rinsed and completely
dry before recoat.
• Always use clean equipment, mops & pads.
• Use an old section of the walk off matting to
place equipment (buckets, floor mops) in order
to help keep area clean.
• Select the chemical and dilution that is aggressive
enough to remove dirty polish layers.
• If you use pads, chemical or a machine that is too
aggressive it might cause a complete stripping
procedure.
www.avmor.com
10
Product Listing
Product
picture
Description
Category
Format
Code
4x1.8L
4x4L
2046257
2046278
EP83
Floor
Stripper
EP83 Floor Stripper is a powerful, highly concentrated,
deep-cutting liquid stripper for easy removal of floor
finishes, waxes, sealers and topcoats.
Stripper
Viper
Floor
Stripper
VIPER is an activated, liquid stripper that is effective
on most types of floor finishes and sealers. Powerful
emulsifiers quickly penetrate even multiple layers of
finishes and saves time.
Stripper
4x4L
Description
Category
Format
Code
EP80 Multi-Use Floor contains NO zinc or other heavy
metals to interfere with industrial wastewater treatment
processes. The gloss, durability, recoatability and
removability of EP80 Multi-Use Floor Coating are excellent.
It dries to a smooth, hard, clear and colourless coating.
Excellent for vinyl composition, linoleum, sheet vinyl,
concrete, terrazzo, quarry, Mexican tile and most resilient
type flooring.
Sealer Finish
4x4L
1995278
DISTANCE is a crystal clear, high gloss, thermacrylic finish
with superior dirt and black mark resistance. This versatile
floor finish is ideal for both hard and resilient floors and
responds well to varying spray buff or spray burnishing
maintenance schedules.
Finish
4x4L
PROTECTION is a high gloss and high solids floor finish
that is designed to give superior protection to floors.
PROTECTION’s excellent levelling characteristics permits
smooth film formation and trouble-free applications.
The finished surface possesses remarkable resistance to
detergents, scuffing and black heel marking.
Finish
4x4L
1518278
W-75 offers good gloss characteristics along with
durability making it the number one choice of school
boards and institutions where spray buffing maintenance
schedules and budgets are restricted. W-75 offers fast
drying properties so down time is at a minimal.
Finish
4x4L
1530278
Dazzler
Floor
Finish
This thermal reactive floor finish responds to high speed
burnishing to blend in scuff and scratch marks to a
lustrous mirror-like finish. “Ultra wet look” shine. Tough
and durable.
Finish
4x4L
1520278
Profile
Plus
PROFILE PLUS gives you clear and ultra resistant floor
finish protection on resilient and hard floors, ensuring
maximum light refractivity and gloss readings as high as
94. It is a premium floor finish formulation that exhibits
exceptional levelling characteristics with no mop drag,
resulting in fast surface coverage, maximum labour
savings and unblemished coverage. It is used daily with
UHS burnishing.
Finish
4x4L
1854278
CAPRICE neutralizes alkaline residues and effectively
removes salt and calcium deposits on most floor surfaces
and industrial carpeting. This remarkable detergent not
only neutralizes the residual effects of strippers and
cleaners, but it also is a super efficient cleaner.
Neutralizer
Cleaner
4x4L
1987278
ROTEX is a one-step neutral cleaner designed to remove
embedded soils quickly from hard surfaces without any
residue and leaving the floor sparkling clean. ROTEX
requires no rinsing and can be used in an automatic
scrubber due to its low foam formula. This effective
formulation delivers superior cleaning performance leaving
a new Summer Breeze scent behind.
Neutralizer
Cleaner
4x1.8L
4x4L
2001257
2001278
Product
EP80
Multi-Use
Floor
Coating
1445278
Avmor
Design for the Environment U.S.
EPAApproved Standard
www.epa.gov/dfe Environmental Choice Program
Big Bruiser
Baseboard
Cleaner
Distance
Ultra powered low odour rinse free stripper. ZIP-STRIP is
one of the most versatile strippers available today. It is
specifically formulated with fast acting emulsifiers and
wetting agents for the efficient removal of multiple layers
of floor finish.
Stripper
BIG BRUISER is a foaming baseboard stripper that
effectively removes soil and wax build-up. It clings to
baseboards, wall tiles and hard to clean areas.
Stripper
4x4L
1804278
Protection
Floor
Finish
10x510gr
1037780
W-75
Exit2
Gum
Remover
Lokseal
Acrylic
Sealer
Thermothane
Sealer
Acra-lok
Acrylic
Sealer
Finish
Venture
Sealer
Finish
11
An effective and superior product used for removing
chewing gum, candle wax and most gummy substances.
Its super fast freeze action quickly solidifies gummy
substance to permit easy removal
LOKSEAL is the most versatile acrylic sealer available.
Lokseal is highly recommended for sealing pores and
levelling floor surfaces in preparation of floor finish
application.
Stripper
Sealer
THERMOTHANE is a unique aqueous thermoplasticurethane sealer specifically formulated for the protection
of interior non-resilient surfaces such as concrete,
quarry tile, Mexican tile, unglazed ceramic, slate, etc.
THERMOTHANE is odourless, fast drying and slip resistant.
This water based emulsion sealer is available for industrial
and institutional use where rugged durability and
chemical resistance are required and when non-yellowing,
odourless and waterproof properties are essential.
Sealer
ACRALOK is environmentally friendly and is NPE (Nonyl
phenol ethoxylate) free, as well as detergent and abrasion
resistant. It is a slip resistant, all acrylic finish that is
durable and does not yellow. Seal and finish-in-one for
exceptional gloss and durability on resilient and stone
floors. High solids.
Sealer Finish
VENTURE is a thermacrylic sealer finish, specifically
formulated for high traffic areas that require exceptional
durability gloss. It can accommodate both low and high
maintenance schedules and respond well to both spray
burnishing or dry burnishing methods. VENTURE leaves a
protective coating with a guaranteed clear and brilliant
shine.
Design for the Environment
EPA Standard
AvmorU.S.
Approved
www.epa.gov/dfe
www.environmentalchoice.com
Floor
Finish
Zip Strip
Floor
Stripper
picture
12x312gr
4x4L
4x4L
2053729
1110278
1111278
Floor
Finish
Floor
Finish
Caprice
4x4L
1962278
Neutralizer
Detergent
Salt
Remover
Rotex
Sealer Finish
4x4L
1500278
Neutral
Cleaner
Environmental Choice Program
www.environmentalchoice.com
1497278
www.avmor.com
12
Product Listing
Product
EP64
Neutral pH
Multi-Use
Cleaner
picture
Avmor’s Green Floor Care Solutions
Description
Category
Format
Code
EP64 Neutral Ph Multi-Use Cleaner is a highly efficient
cleaner for floors, walls, and other hard surfaces where
a neutral Ph range solution is desirable. The powerful
cleaning agents in EP64 will quickly remove soils without
dulling, damaging, etching or harming floor finishes even
when used for daily applications. It is free rinsing and will
leave no film or residues.
Cleaner
4x1.8L
4x4L
1990257
1990278
A pleasantly fragranced, low foaming, neutral range
floor cleaner and maintainer. Buffalo Shine is especially
designed to combine good cleaning power with high
quality Avmor floor polymers to leave floors with a clean,
shiny, anti-slip finish. Use with confidence on all types of
floors including vinyl sheet and tiles, linoleum, quarry and
ceramic tiles, marble and terrazzo, sealed concrete and
wood floors.
Cleaner /
Maintainer
SIDEKICK is a versatile restorer, infinitely dilutable making
it the product of choice for large surface application by
autoscrubber. SIDEKICK will also accommodate both low
and high maintenance schedules and can be used for both
spray buffing and spray burnishing applications.
Restorer/
Maintainer
Design for the EnvironmentAvmor
U.S. EPA
Approved Standard
www.epa.gov/dfe
Green Seal
Buffalo
Shine
Floor
Cleaner /
Maintainer
Sidekick
Vitaminizer
Restorer
Maintainer
Snap
Back
Restorer
Maintainer
EP65
Heavy Duty
Cleaner
Degreaser
Solnet
Light
Scrub
Cleaner
Degreaser
A-707 Top
Scrub
Cleaner
Degreaser
SNAP BACK is an excellent restorer for all spray buffing
requirements. SNAP BACK cleans, shines, and protects all
types of floor finishes, and is compatible with low to high
speed floor equipment.
www.greenseal.org
1943278
Environmental Choice Program
www.environmentalchoice.com
Description
Category
Format
Code
EP80 Multi-Use Floor contains NO zinc or other
heavy metals to interfere with industrial wastewater
treatment processes. The gloss, durability,
recoatability and removability of EP80 Multi-Use
Floor Coating are excellent. It dries to a smooth,
hard, clear and colourless coating. Excellent for
vinyl composition, linoleum, sheet vinyl, concrete,
terrazzo, quarry, Mexican tile and most resilient type
flooring.
Sealer Finish
4x4L
1995278
Acra-lok
Acrylic
Sealer
Finish
ACRALOK is environmentally friendly and is NPE
(Nonyl phenol ethoxylate) free, as well as detergent
and abrasion resistant. It is a slip resistant, all
acrylic finish that is durable and does not yellow.
Seal and finish-in-one for exceptional gloss and
durability on resilient and stone floors.
Sealer Finish
EP64
EP64 Neutral Ph Multi-Use Cleaner is a highly
efficient cleaner for floors, walls, and other hard
surfaces where a neutral Ph range solution is
desirable. The powerful cleaning agents in EP64 will
quickly remove soils without dulling, damaging,
etching or harming floor finishes even when used
for daily applications. It is free rinsing and will
leave no film or residues.
Cleaner
EP65 Heavy Duty Cleaner Degreaser will clean,
degrease, brighten floors, windows, walls,
countertops, cabinets, sinks, partitions, ledges,
ceilings, concrete, terrazzo, quarry tile, tile
grouting, garbage cans, dumpsters, garbage
disposals, malodours, cooking odours, light fixtures,
stainless steel, chrome, plastic, vinyl, appliances,
desks, porcelain, porcelain enamel and other
surfaces not harmed by water. It will effectively
remove industrial grease and oil, animal fats,
permanent marker ink, crayons, ballpoint ink, heavy
finish build-ups, fingerprints and most water based
or oil based soils.
Cleaner
Deep Scrub
Product
Restorer/
Maintainer
EP65 Heavy Duty Cleaner Degreaser will clean, degrease,
brighten floors, windows, walls, countertops, cabinets,
sinks, partitions, ledges, ceilings, concrete, terrazzo,
quarry tile, tile grouting, garbage cans, dumpsters,
garbage disposals, malodours, cooking odours, light
fixtures, stainless steel, chrome, plastic, vinyl, appliances,
desks, porcelain, porcelain enamel and other surfaces
not harmed by water. It will effectively remove industrial
grease and oil, animal fats, permanent marker ink,
crayons, ballpoint ink, heavy finish build-ups, fingerprints
and most water based or oil based soils.
Cleaner
Deep Scrub
SOLNET is a scientific blend of low foam surfactants
and sequestrants, with a pleasant citrus fragrance for
maximum cleaning and deodorizing action. This low foam,
free rinsing floor cleaner is designed to leave protected
floors clean and bright without the need for rinsing.
Cleaner
Deep Scrub
A707 is a special blend of detergents and water soluble
solvents designed for low foam cleaning and degreasing.
A707 removes oily residue, grease, protein soil, soot and
carbon from washable surfaces. It is the ideal cleanerdegreaser for use in autoscrubbers. A-707 will also remove
top layers of finish.
4x4L
4x4L
1506278
12x946mL
1579210
4x1.8L
4x4L
1991257
1991278
Design for the EnvironmentAvmor
U.S. EPA
Approved Standard
www.epa.gov/dfe
Green Seal
www.greenseal.org
Cleaner
Deep Scrub
4x4L
4x4L
EP80
Multi-Use
Floor
Coating
Neutral pH
Multi-Use
Cleaner
EP65
Heavy
Duty
Cleaner
Degreaser
1442278
Environmental Choice Program
www.environmentalchoice.com
1318278
EP83
Floor
Stripper
picture
EP83 Floor Stripper is a powerful, highly
concentrated, deep-cutting liquid stripper for
easy removal of floor finishes, waxes, sealers and
topcoats.
Approvals
Design for the Environment U.S. EPA
www.epa.gov/dfe
Avmor Approved Standard
4x4L
1962278
Environmental Choice Program
www.environmentalchoice.com
4x1.8L
4x4L
1990257
1990278
Design for the Environment
U.S.
EPA
Avmor
Approved
Standard
www.epa.gov/dfe
Green Seal
www.greenseal.org
4x1.8L
4x4L
1991257
1991278
Environmental Choice Program
www.environmentalchoice.com
Design for the Environment U.S. EPA
www.epa.gov/dfe
Avmor Approved Standard
Green Seal
www.greenseal.org
Environmental Choice Program
www.environmentalchoice.com
Stripper
4x1.8L
4x4L
2046257
2046278
Design for the Environment
EPA Standard
Avmor U.S.
Approved
www.epa.gov/dfe
Environmental Choice Program
www.environmentalchoice.com
Nordic Swan Eco Label
13
www.avmor.com
14
Avmor is the industry leader in the development and manufacturing of
professional cleaning and sanitation systems. For over 50 years, Avmor
has remained at the industry forefront, defining product performance
standards and striving for the safest and most cost-effective cleaning
systems for professional use. Avmor is committed to meeting and
exceeding customer satisfaction in terms of product quality and
service by embracing the principles of the ISO 9001-2000 and GMP
(Good Manufacturing Practices).
Avmor Canada Address:
AVMOR LTD.
950 MICHELIN STREET
LAVAL, QUEBEC H7L 5C1
Toll free: 1 800 387-8074
Tel: (450) 629-8074
Fax: (450) 629-4512
Avmor UK address:
AVMOR LTD.
P. O. BOX 234
NORTHAMPTON, ENGLAND NN3 2YL
Tel: + 44 604 472 300
Fax: + 44 604 472 939
Distributors name
www.avmor.com
Avmor Europe Address:
AVMOR EUROPE APS
OMOEVEJ 84
DK 4600 KOEGE
DENMARK
Phone No: + 45 5665 2973
Fax No: + 45 5665 2974
www.avmor.eu - info@avmor.eu