2011 Parts Catalog

Transcription

2011 Parts Catalog

2011 Parts Catalog
Parts Catalog
Table of Contents
Parts Section
Milker Claws ........................................................................ 3 - 4
Unit Kit for Claws .............................................................. 5
Electronic Pulsation............................................................ 6
Pulsator Accessories.......................................................... 7
PulStar Pulsator ................................................................... 8
CIP Wash Systems ............................................................. 9
Jetter Washer Accessories .............................................. 10 - 11
Milking Machine Parts ........................................................ 12 - 13
Milker Unit Accessories .................................................... 14 - 18
Rubberware ......................................................................... 19
Mini Milker Systems .......................................................... 20 - 23
Plate Coolers ....................................................................... 24
Detachers ............................................................................. 25
Breakdown Section
Original Standard Claws ................................................... 27
Original MLX Claws .......................................................... 28
FulFlo Standard Claws ....................................................... 29
FulFlo MLX Claws .............................................................. 30
Standard Goat Claws......................................................... 31
PulStar Pulsator ................................................................... 32
Jet Washer Systems ........................................................... 33
Mini Pumps Complete ....................................................... 34
Mini Pump with Motor ...................................................... 35
Allflex Sensor....................................................................... 36
Waikato Detacher.............................................................. 37
Milker Charts....................................................................... 38 - 40
To Order phone 1-800-233-6878
Ver. 2.2 0411
Parts Catalog
Ver. 2.2 0411
Parts Catalog
NuPulse® Original Claws
TWO LINE SYSTEM
ONE LINE SYSTEM
The original standard
claw is not available
with a shutoff. For
claws with shutoff, see
FulFlo models. Comes
complete with Flow
Responsive Pulsation.
The original MLX claw is
not available with a shutoff.
For claws with shutoff, see
FulFlo models. Comes
complete with Flow
Responsive Pulsation.
Order #: 10067NP - MLX Claw
Order #: 10001NP - Original
Standard Claw
Picture shows Standard
Claw with Standard Unit
Kit.
Picture shows MLX Claw
with MLX Unit Kit.
For Unit Kits, see page 5
GOAT SYSTEM
The goat claw is NOT
available with a shutoff.
Picture shows Goat Claw with
Goat Unit Kit.
Order #: 10101NP - Goat Claw
Ver. 2.2 04.11
Page
3
Parts Catalog
Milker Claws
FULFLO CLAW
Designed to eliminate flooding, vacuum instability and slippage. Lightweight gray polysulphone for all around visibility.
Large 3/4” milk outlet ensures rapid clearance of milk. Comes complete with Flow Responsive Pulsation. Milk Inlets
available in both standard configuration and Parallel Parlor (between hind legs) styles.
Optional Automatic Shut-Off Valve Available
Standard Milk Inlet
Configurations
Parallel Parlor
Milk Inlet
Configuration
FulFlo Standard Claw
FulFlo MLX Claw
Order #:
12000NP Standard Claw
Order #:
12400NP
12500NP
12600NP
12700NP
12100NP Std. Claw with Shut-Off
12200NP Std. Parallel Claw
12300NP Std. Parallel Claw with Shut-Off
Picture shows claw with
Unit Kit (shells, liners, etc.)
MLX Claw
MLX Claw with Shut-Off
MLX Parallel Claw
MLX Parallel Claw with Shut-Off
KLEEN FLO CLAW
The ultimate in durability with a stainless steel top and radel base. The
base is designed for either 5/8” or 3/4” hose to allow for ultra high
flow rates while maintaining stable claw vacuum. Pulsation manifold is
configured SIDE-TO-SIDE alternating pulsation. Available with or without Shut-Off Valve.
For replacement parts, see page 13
Order #: 13304 Claw less Shut-Off Valve
14326 Claw with Shut-Off Valve
Page 4
Ver. 2.2 04.11
Note: Does not include pulsation
Parts Catalog
Unit Kits for Claw
UNIT KIT FOR STANDARD (ONE LINE) SYSTEM
All kits include Heavy Shells, Premium Short Air Tubes and 9 ft. Premium Milk Hose
Order #: 12330NP Kit for Original Standard Claw—also includes MZ10057 liners & Snap Clamp
12340NP Kit for FulFlo Standard Claw—also includes MZ10055 liners & Snap Clamp
12360NP Kit for FulFlo Standard Claw with Shut-Off—also includes MZ10055 liners
UNIT KIT FOR MLX (TWO LINE) SYSTEM
All kits include Heavy Shells, Premium Short Air Tubes, 9 ft. Premium Milk Hose, 9 ½ Feet
of Pulsation Hose and Dual Hose Clips
Order #: 12730NP Kit for Original MLX Claw—also includes MZ10057 liners & Snap Clamp
12740NP Kit for FulFlo MLX Claw—also includes MZ10055 liners & Snap Clamp
12760NP Kit for FulFlo MLX Claw with Shut-Off– also includes MZ10055 liners
UNIT KIT FOR KLEEN FLO CLAW
Order # 12850NP Kit for Kleen Flo Claw—includes MZ10055 liners, MZ10047 Lightweight
Shells, 9 ft. Premium Milk Hose, 10 Feet Twin Pulsation Hose, Premium Short
Air Tubes
UNIT KIT FOR GOAT CLAW
Order #: 10105NP Kit for Goat Claw—includes MZ10050 liners, MZ10047 Lightweight Shells, 9
ft. Premium Milk Hose. Premium Short Air Tubes & Snap Clamp
Ver. 2.2 04.11
Page
5
Parts Catalog
Kleen Flo Pulsators
KLEEN FLO PULSATORS
The Kleen Flo Pulsators are available in both Stanchion and Parlor Models.
The parlor model pulsator includes a rubber front protector seal and a threaded
1/2” pipe to mount the pulsator on the line.
Order #: 43184 - Stanchion Model WITH fresh air kit
43185 - Stanchion Model LESS fresh air kit
43186 - Parlor Model WITH fresh air kit
43187 - Parlor Model LESS fresh air kit
PULSATION CONTROLLER
PULSATION CONTROLLER CIRCUIT BOARD
Stainless steel 110 volt
Pulsation box, comes with a
12-unit Excalibur circuit
board.
Order # 43200
Excalibur B12 pulsation boards feature 11
easy-to-set speeds and ratios, and come with
an 18 month warranty. Can be adjusted from
50 to 75 pulses per minute and from 50/50 to
70/30.
Order # 21345
Page 6
Ver. 2.2 04.11
Parts Catalog
Kleen Flo Pulsator Accessories
KLEEN FLO STALLCOCK
STALLCOCK REPLACEMENT KIT
Replacement Kit for 43260 Kleen
Flo Stallcock.
Thread on heavy duty
stallcock.
Order #: 43236
Order #: 43260
KLEEN FLO PULSATOR COIL
STAINLESS STEEL STALLCOCK & CANE
Order #: 23865 - Stainless Stallcock
23860 - Cane with
Clip & Gasket
23862 - Spring
Clip
23861 - Gasket
Order #: 43215 - Black coil for Kleen Flo Pulsator
KLEEN FLO PULSATOR REPAIR KIT
Kits are available in a 5 piece version or a 17 piece version.
Order #: 43240 - 5 piece kit includes:
2 x pistons
2 x coil seals
1 x front seal
Order #: 43245 - 17 piece kit includes:
2 x pistons
1 x foam filter
2 x coil seals
4 x screws
1 x front seal
4 x washers
2 x side plugs
1 x spring
Ver. 2.2 04.11
Page
7
Parts Catalog
PulStar
PULSTAR PULSATORS
NuPulse® offers a simple, easy to install vacuum operated pulsator with adjustable pulsation. Works with any
conventional claw. With only 4 moving parts, the PulStar provides dependable, low maintenance service without any
electrical wiring or controls. Adapters are available to fit all the major brands of stallcocks.
Double Outlet Parlor
Pulsator.
Single Outlet Stanchion Barn Pulsator
Select from Stallcock
Adapters listed below.
For permanent installation in Parlors.
Each PulStar will operate 2 milker units.
Order #: 10059NP Single
10058NP Double
DELAVAL PULSTAR ADAPTER
Order # M10080NP
UNIVERSAL SIDE ENTRY PULSTARADAPTER
SURGE/CHOREBOY PULSTAR ADAPTER
Order # 10080NP - Adapter
M10042NP - ‘O’ Ring for adapter
UNIVERSAL TOP ENTRY PULSTAR
ADAPTER
Order #: 10082NP - Adapter
MZ10009NP- ‘O’ Ring for adapter
PULSATION CLAW ADAPTER
Used to convert alternating pulsation
claws to simultaneous pulsation
Order #: 10088NP
Page 8
Ver. 2.2 04.11
Order # 10081NP - Adapter
MZ10009NP - ‘O’ Ring for adapter
BOUMATIC PULSTAR ADAPTER
Order #: 10083NP
M10042NP - ‘O’ Ring for adapter
Parts Catalog
CIP Wash Systems
JET WASH SYSTEM
The NuPulse® Jet Wash System is used for the NuPulse® Claws.
Order #: 10090NP Standard Jet Washer System includes Jetter, Jetter Mounting Kit, Jetter Hose with Adapter
10099NP MLX Jet Washer System includes Jetter, Jetter Mounting Kit, Jetter Cap
10095NP Goat Jet Washer System includes Jetter, Jetter Mounting Kit, Jetter Tee, Jetter Hoses with Adapter
10112NP Jet Washer Only - does not include accessories
For 1½” wash line—please order 10128NP Conversion Kit for 1½” line.
TOP WASH SYSTEM
The Top Wash System for the NuPulse® claws allows the inflations to be washed on the top and the outside.
Order #: 10114NP Standard Top Wash System includes Jetter, Jetter Mounting Kit, Jetter Hose with Adapter
10109NP MLX Top Wash System includes Jetter, Jetter Mounting Kit, Jetter Cap
10117NP Goat Top Wash System includes Jetter, Jetter Mounting Kit, Jetter Tee, Jetter Hose with Adapter
10119NP Top Wash Jetter Only - does not include accessories.
For 1½” wash line—please order 10128NP Conversion Kit for 1½” line.
FOLD DOWN CIP TRAY
This sturdy Fold Down CIP only requires
minimal curb
space when in
upright
position - 5/8”
wash nipple
comes out the
side to avoid
pinching the
hose when unit
is lowered.
Order # 10292 - 57 mm
UNDER-CURB SLIDING CIP
This CIP mounts with side blocks. The tray
has stops so the drawer cannot be pulled out.
The drain is a
5/8” ID stainless
nipple coming
straight out of
the bottom. The
unit is 13” long
by 10” wide.
Order#: 1027757 mm
Ver. 2.2 04.11
Page
9
Parts Catalog
Jet Washer Accessories
JETTER JET COVER
High quality rubber covers are designed to close the Jet Washer while not in use. Includes stainless steel chains to prevent
loss of covers. Very convenient to use.
Order # M10089NP
Note: 2 x M10089NP are required for each complete jetter.
FOR ILLUSTRATION ONLY
Demonstrates how the jetter covers attach to the jet washer assembly
TOP WASH JETTER COVERS
PARLOR JETTER MOUNTING KIT
Designed to mount the jetter in the parlor - remote
from the wash line. Kit includes Washer Plate, ‘L’ Bracket, Manifold Adapter, Gasket & 2 Screws.
Order #: 10110NP
Note: 2 sets needed for each jetter
JETTER JET REPLACEMENT KIT
Kit includes 4 each of Jetter Jet, Jet ‘O’ Ring, Jet
Circlip & Jet Spacer Ring.
Order #: 10084NP
Page 10
Ver. 2.2 04.11
Order #10116NP
TOP WASH REPLACEMENT KIT
Kit includes 4 each of Top Wash Rubber Cup
and Top Wash Cone.
Order #: 10115NP
Parts Catalog
Jet Washer Accessories
2” JETTER CLAMP KIT
1-1/2” JETTER CONVERSION KIT
Comes with Jetter Complete or can be ordered separately.
Used to convert the 2” Jetter to fit on 1-1/2” pipe.
Used with clamp kit.
Order #: 10128NP
Order #: 10129NP
JETTER TUBE WITH ADAPTER
Comes with Jetter Complete or can be ordered
separately. Jetter tube is 14” long.
Order #: 10003NP - Comes with 14” tube and adapter
MZ10024NP - Jetter tube adapter only
JETTER COVER WITH 2” SADDLE
JETTER ‘O’ RING LARGE
Used with both 2” and 11/2” jetters. For 1-1/2”
jetter use conversion kit
above.
Goes between the cover and base.
Should be changed whenever jetter
is taken apart.
Order #: MZ10085NP
Order #: MZ10095NP
JETTER BASE ONLY WITH JETS
Used with both 2” and 1-1/2” jetters. Recommended that large ‘O’ Ring be replaced
at the same time as the base or cover.
Order #: 10035NP - Jetter Base only with Jets
10135NP - Top Wash Base only with Cups and Cones
MZ10094NP—Jetter Base less Jets
Ver. 2.2 04.11
Page
11
Parts Catalog
Milking Machine Parts
ONE-LINE (STD) SYSTEM
TWO-LINE (MLX) SYSTEM
Order # MZ10006NP - Original Dome
Order # MZ10006NP - Original Dome
MZ12001NP - FulFlo Dome
MZ12001NP - FulFlo Dome
Order #: MZ10068NP Original MLX Middle
Order #: MZ10016NP - Original Middle
MZ12005NP - FulFlo Middle
Order #: MZ10100NP - Original Goat
Middle.
MZ12405NP - FulFlo MLX
Middle
Order #: MZ10070NP - Original
MLX Bowl
KLEEN FLO BASE
Order #: MZ10013NP - Original
Bowl
Order #: MZ10106NP - Goat
Bowl
Page 12
Ver. 2.2 04.11
Bowls are made from durable RADEL plastic. Bowls are
300cc and fit the 14300 Kleen Flo Claw.
Order #: 13350 - Claw bowl
13360 - Claw bowl with
hole drilled for shut-off.
Parts Catalog
Milking Machine Parts
FULFLO CLAW BOWLS
FULFLO PARALLEL PARLOR (PP) CLAW BOWLS
All FulFlo bowls are available with or without shutoff. The
standard configuration is with 35º milk inlet and 3/4” milk
outlet. Inlets on the
All FulFlo bowls are available with or without shutoff. The
standard configuration is with 125º milk inlets and 3/4”
milk outlet. Inlets on the
parallel style claw bowl
extend from the bowl
parallel to the line between
the cow’s head and tail.
standard configuration style
claw bowl extend from the
bowl at a 45º angle to a line
from the cows head to tail.
Order #: MZ12010NP - Standard Bowl
MZ12110NP - Standard Bowl with Shutoff
The narrower profile of
the parallel style bowl is
made to accommodate unit attachment through the cow’s
rear legs.
Order #: MZ12210NP - Standard PP Bowl
MZ12310NP - Standard PP Bowl with Shutoff
MZ12410NP - MLX Bowl
MZ12510NP - MLX Bowl with Shutoff
W 12110NP - Standard Bowl drilled for Shutoff
W 12510NP - MLX Bowl drilled for Shutoff
MZ12610NP - MLX PP Bowl
MZ12710NP - MLX PP Bowl with Shutoff
W 12210NP - Standard PP Bowl drilled for Shutoff
W 12710NP - MLX PP Bowl drilled for Shutoff
SHUTOFF PARTS FOR NUPULSE® CLAW
SHUTOFF PARTS FOR KLEEN FLO CLAW
MZ12017
MZ12015
MZ12016
Order #: MZ12016NP - Shutoff Valve
MZ12017NP - Shutoff Button
MZ12015NP - Rubber Foot for Shutoff
Order #: 14302 - Shutoff Clip
14351 - Grey Shutoff Valve
Ver. 2.2 04.11
Page
13
Parts Catalog
Milker Unit Accessories
For additional claw parts—see claw breakdown in the Parts Breakdown Section.
STANDARD PULSATOR REPAIR KIT FOR NUPULSE® CLAWS
MLX PULSATOR REPAIR KIT FOR NUPULSE® CLAWS
Fits Original and FulFlo
Standard claws using one
hose only.
Fits Original and
FulFlo MLX claws
using both milk hose
and pulsation hose.
Used for goat claws.
Order #: 10019NP
NUPULSE® PULSTAR PULSATOR REPAIR KIT
Order #: 10107NP
KLEEN-FLO CLAW REPAIR KITS
Rubber parts kit for Kleen-Flo
claw.
Order # 13325 Kit for claw less
valve.
Fits PulStar double & single
pulsator.
Order # 14355 Kit for claw with
valve (includes seal &
shutoff valve).
Order #: 10120NP
HOSE CLIPS
NUPULSE®
BOBBIN ONLY
PULSATOR DIAPHRAGM
COMPLETE
NUPULSE® PULSATOR BOBBIN
COMPLETE
Used for 2 hose or 3 hose systems.
Bobbin is used
for all NuPulse®
claws.
Order #:
MZ10022NP
Page 14
Order #: D255658 - Dual Hose Clip
D255657 - Triple Hose Clip
17580 - 5/8” Alternating Clip
17578 - 3/4” Alternating Clip
Ver. 2.2 04.11
Diaphragm is used
for all NuPulse®
claws.
Includes all parts
necessary to rebuild pulsator
bobbins on all
NuPulse® Claws.
Order #: MZ10005NP
Order #: 10008NP
Parts Catalog
For additional claw parts—see claw breakdown in the Parts Breakdown Section.
PULSATOR SPRING GAUGE
Used to determine maximum and
minimum length for the pulsator
spring.
Order #: MZ10008NP
SQUARE BASE ‘O’ RING
Fits on the base—between the
bowl & middle of the Standard
(One Line) Claws, including Goat
Claw.
PULSATOR SPRING
Used in all NuPulse® claws. To
check for maximum & minimum requirements, use spring gauge.
Order #: MZ10007NP
MIDDLE ‘O’ RING
Fits on the middle—between the
middle & dome of all NuPulse® claws.
Order #: MZ10014NP
Order #: MZ10017NP
CLAW PROTECTOR SEAL
Fits on the outside rim of the
middle to prevent dirt build-up
between the middle and the bowl.
Order #: MZ10030NP
Note: Not required on Goat Claws
MLX DIAPHRAGM
Fits between the base and the
middle of the MLX (Two Line)
Claw. Used for both Original
MLX and FulFlo MLX models.
Order#: MZ10069NP
BOBBIN HOUSING SEAL
The bobbin seal fits on the bottom of
the bobbin housing and creates a seal
between the middle and the pulsator
parts.
Order #: MZ10015NP
PRICKER
Used in cleaning air bleed holes in
the pulsator bobbin and MLX air
bleed hole in bowl.
Order #: MZ10020NP
Ver. 2.2 04.11
Page
15
Parts Catalog
WASH PLUG WITH STRAP
PLASTIC INFLATION PLUG
The NuPulse® Inflation plug can be
used on any inflation.
Plug fits into the middle of the claw
while in the milking cycle.
Order #: MZ10522NP
Order #: MZ10002NP
BLUE MILK VALVE
STAINLESS STEEL TAKEOFF BRACKET
Valve is used with Blue Milk Valve
Canes.
For use with all NuPulse Claws to
provide an attachment point for
Automatic Takeoff Cords
Order #: 56421 - 1-1/2”
56422 - 2”
56423 - 2-1/2”
56424 - 3”
Order #: D10111NP
PLASTIC DELRIN 5/8” SHUTOFF
VALVE
56325 - Round Slide Gasket
56327 - Square Pipe Gasket
Order#: 21910 - 5/8” Non Vented
Valve
21925 - 3/4” Non Vented
Valve
CANE FOR BLUE MILK VALVE
Used with Blue Milk Valve.
Order #: 56320 - Push Up
56319 - Pull Down (Reverse)
STAINLESS STEEL SHUTOFF VALVE
Order #: 21918 - 5/8” with stop
21916 - 3/4” with stop
2” & 3” HANGERS
Order #: 61301 - 2” to 3” J Hanger Complete
61299 - 2” to 3” L Hanger Complete
61313 - J Hanger (Only)
61310 - L Hanger (Only)
61317 - U Clip for Hanger
Page 16
Ver. 2.2 04.11
Parts Catalog
SNAP CLAMP
STAINLESS STEEL SHELLS
NuPulse® manufactures
both a heavy weight (14
ga.) shell that is used
with the plastic claw to
allow even distribution
of weight while milking;
as well as the light
weight (18 ga.) shell that
can be used on
traditional heavier
claws.
Used to shut off vacuum on the
milk hose. Fits 5/8” milk hose.
Order #: 21905
CLAMP ON VALVE NIPPLE
Order #: 56311 - 2” x 5/8”
56312 - 3” x 5/8”
56313 - 3” x 3/4”
56301 - Gasket for 5/8”
56302 - Gasket for 3/4”
Order #: MZ20705NP - Heavy Weight 10.9 oz. (.68 lb)
MZ10047NP - Lightweight 7.9 oz. (.5 lb)
RUBBER CLOSURE
MOLDED ELBOW
Used on straight inlets to shut
off vacuum.
Order #: M10026NP - 5/8” x 5/8”
Order #: A32050NP - 5/8”
A32051NP - 3/4”
HOSE HANGER
RUBBER CLAW HOOK
Fits all NuPulse® Claws.
FLIP UP RUBBER CLOSURE
Hose hanger fits
up to 2” line.
Order #: 56375 - Fits 9/16”, 5/8”
56379 - Fits 3/4”
Order #: 17586
Order #: MZ10031NP
Ver. 2.2 04.11
Page
17
Parts Catalog
The following adapters are used to connect the pulsation hose on MLX Units to existing Stall Cocks.
DELAVAL ADAPTER
Order #: M10075NP
BOUMATIC ADAPTER
SURGE/CHOREBOY ADAPTER
Order #: 10078NP
M10042NP - ’O’ Ring
UNIVERSAL TOP ENTRY ADAPTER
Order#: 10063NP
Order #: 10077NP
UNIVERSAL SIDE ENTRY ADAPTER
MLX 2 TO 1 PAIL ADAPTER
Used to connect pulsation hose and milk hose together
for operating on a common source.
Order #: 10076NP
M10041NP - ‘O’ Ring
Order #: M10079NP
SILICONE MILK HOSE
CLEAR PLASTIC TUBING
Order #: 25230 - 9/32” ID
25234 - 9/16” ID
25235 - 5/8” ID
25234 - 1/2” ID
25237 - 3/4” ID
25227 - 9/32” ID Twin
Order #: 25105 - 5/8”- 100’ Roll
25106 - 3/4”- 100’ Roll
Page 18
Ver. 2.2 04.11
Sold in rolls of 100 ft.
Parts Catalog
Rubberware
NUPULSE® GENUINE INFLATIONS
NUPULSE® SHORT AIR TUBES
NuPulse® inflations are
manufactured to last 3000
milkings. To calculate number
of days of use - use the
following formula:
Genuine premium green stripe short air
tubes.
Order #: MZ13160NP - 7.87” (200mm) long
3000 (milkings) X # units
Milkings per day X # in herd
MOLDED AIR TUBES
Order #: MZ10057NP - Super - for Original Claw
MZ10050NP - Smith 16 - for Goat Claw
MZ10055NP - FulFlo Super - for FulFlo Claw
MZ10058NP - Super Short - for FulFlo Claw
Order #: M10046NP - 7.5” long
Sold in cases of 100 or sets of 4
REPLACEMENT INFLATIONS
BouMatic IB-R1C
Order #: M90025
Surge JF-48
Order #: M90010
KF01 (Fits 06 Shells)
Order #: 25003
Universal IU282
Order #: M90015
Surge JF-60
Order #: M90030
GENUINE NUPULSE® HOSE
Genuine NuPulse® hose is made with a premium, durable
rubber with a thick wall to prevent premature collapsing.
Can be purchased by the roll or foot.
Order #: MZ13162NP - 5/8” Green stripe (63 feet)
MZ13164NP - 3/8” Green stripe (66.5 feet)
MZ13165NP - Jetter Hose green stripe (60 feet)
Ver. 2.2 04.11
Page
19
Parts Catalog
Mini Milker Systems
PORTABLE MINI MILKER WITH NUPULSE® CLAWS COMPLETE
The finest Portable Mini Milker System featuring a 3/4 HP
electrical motor and pump assembly for increased vacuum
capability. Along with the heavy duty motor and oil-less
pump assembly, the Mini Milker System includes an adjustable
regulator, vacuum gauge, high polished stainless steel
moisture trap and vacuum reserve tank, all necessary hoses,
65# stainless steel pails, stainless steel lid and milker units.
Also available with a 68# plastic pail. Vacuum check valve is
optional. Perfect for exhibitors or small farms.
Order #: 10197NP - with 1 x 65# bucket and cow claw
10179NP - with 2 x 65# buckets and cow claws
10180NP - with 1 x 65# bucket and goat claw
10181NP - with 2 x 65# buckets and goat claws
10182NP - with 1 x 68# plastic pail and cow claw
DELUXE 1 HP PORTABLE PUMP
WITH
65# STAINLESS STEEL PAIL MILKER
This portable pump is a very heavy duty unit and can be
wheeled almost anywhere you need to go. It comes with a
Conde #3 vacuum pump and a 1 HP Farm Duty motor on a
cart with 10” air tires, which plugs into standard 110V/15Amp
outlet. Units are shipped fully assembled by truck.
Order #: 70210 - with 1 NuPulse SS Pail Milker
70220 - with 2 NuPulse SS Pail Milker
Page 20
Ver. 2.2 04.11
Units can be shipped via UPS. Weighs approximately 110
lbs for 1 mini milker with 1 pail unit complete.
MINI MILKER COMPLETE WITH KLEEN-FLO CLAW
This mini pump unit comes with a Kleen Flo Claw and a
D#95 Vacuum Operated pulsator. The Mini System comes
complete with a heavy duty motor and oil-less pump
assembly as well as an adjustable regulator, vacuum gauge,
high polished stainless steel moisture trap and vacuum
reserve tank, all necessary hoses, 65# stainless steel pail,
stainless steel lid. Can be shipped via UPS.
Order #: 41000NP - Mini Pump Complete
30015 - Kleen-Flo Bucket Unit Complete
Parts Catalog
Pail Units
NUPULSE® PAIL MILKER UNITS
All NuPulse® Pail Milker Units come complete with a bucket, lid, hoses
and milker claw. This unit can be attached directly to a mini pump or
to the milk line. The NuPulse® units only use 1 line for milk and
vacuum, therefore eliminating additional vacuum hoses.
Order #: 10150NP - 65# Stainless Steel Pail with milker claw complete
10153NP - 35# Stainless Steel Pail with milker claw complete
10154NP - 68# Plastic Pail with milker claw complete
NUPULSE® PAIL MILKER UNITS FOR GOATS
All NuPulse Pail Milker Units come complete with a bucket, lid, hoses
and milker claw. This unit can be attached directly to a mini pump or
to the milk line. The NuPulse® units only use 1 line for milk and
vacuum, therefore eliminating additional vacuum hoses.
Order #: 10151NP- 65# Stainless Steel Pail with goat claw complete
10152NP - 35# Stainless Steel pail with goat claw complete
10155NP - 68# Plastic Pail with goat claw complete
KLEEN FLO PAIL MILKER UNITS
All Kleen Flo Pail Milker Units come complete with a bucket, lid, hoses,
D#95 pulsator and milker claw. This unit can be attached directly to a
mini pump or to the vacuum and milk line.
Order #: 30015 - 65# Stainless Steel Pail with milker claw complete
30045 - 68# Plastic Pail with milker claw complete
Ver. 2.2 04.11
Page
21
Parts Catalog
Mini Pumps
OIL-LESS 1/4 AND 3/4 HP MINI PUMP
E-Zee NuPulse® offers a 1/4HP and 3/4HP Mini Pump Assembly consisting of
a heavy duty electric motor and oil-less vacuum pump, mounted on a
stainless steel moisture trap and vacuum reserve tank.
An oil-less type vacuum pump with adjustable regulator and vacuum gauge is
direct coupled to the motor. The motor is supplied with a 9 ft. three-prong
wire power cord for 120 VAC operation.
The vacuum tank has a clear plexi lid for easy viewing into the tank. The tank
bottom is equipped with 2 support legs for stability. Note: Shipped by UPS
and some assembly required.
Order #: 41000NP - 3/4HP Mini Pump Complete
41010NP - 1/4HP Mini Pump Complete
Unit weight: 41000NP - 75 lbs.
41010NP - 50 lbs.
DELUXE PORTABLE PUMP
This portable pump is a very heavy duty unit and can be
wheeled almost anywhere you need to go. It comes with a
Conde #3 vacuum pump and a 1 HP Farm Duty motor on
a cart with 10” air tires, which plugs into standard
110V/15Amp outlet. UNITS ARE SHIPPED FULLY
ASSEMBLED BY TRUCK.
Order #: 70100 - Deluxe Portable Pump Unit
Page 22
Ver. 2.2 04.11
Parts Catalog
Mini Milker Accessories
D#95 PULSATOR
REPLACEMENT LIDS
E-Zee NuPulse® offers replacement lids.
The D#95 vacuum operated pulsator (60/40)
comes with the Kleen-Flo milker pail unit.
90º
Order #: 20360 - 60/40 Pulsator
20365 - 65/35 Pulsator
20370 - 70/30 Pulsator
20372 - 50/50 Pulsator (90ppm for goats)
20660 - Diaphragm Replacement Kit
STAINLESS STEEL PAIL
All pails are made of 304 grade
stainless steel and come with a short
handle. 65# pail measures 13½”W x
18½”H. 35# pail measures 11½”W x
13¼”H.
PLASTIC PAIL
This 68# pail allows full view of the
milk collected. Can be used for
fresh cows. There is no warranty
on the plastic pails.
Order #:
34310 - Stainless Lid with gasket and
2 x 5/8” 90º inlets with
checkball & cage
34312 - Stainless Lid with gasket and
3 x 5/8” 90º inlets with checkball
& cage (used only for goats)
25195 - Replacement Gasket for SS
Lid
35201 - Fresh Cow Lid with gasket &
checkball & cage
35005 - Replacement Gasket for
Plastic Lid
CHECKBALL & CAGE
Order #: 30165 - 65# pail
30135 - 35# pail
55#, 75#, 80# & 90# pails also available
Order #: 30300 with short handle
30304 with long handle
Note: not approved for grade A milk
Checkball unit is mounted on underside
of lid and prevents milk from
overflowing into vacuum pump.
Order #:
10132 - cage only for ss lid
10132 - ball only for ss lid
35210 - checkball and cage
for plastic lid
Ver. 2.2 04.11
Page
23
Parts Catalog
Plate Coolers
PLATE COOLERS
Lower your electricity bill by
installing an M-Style Plate
Cooler. The 3-A
Approved units
come with all
stainless center
plates and have
1½” milk ports and
1” NPT water ports.
INLET/OUTLET GASKET FOR PLATE COOLER
Order #: 20961
EXTERNAL WATER VALVE
Order #:
20930
M400 - 30 Plates
4140 lbs. Milk per hour
20942
M600 - 42 Plates
20954
M800 - 54 Plates
20837
Kleen-Flo - 31 Plates 3060 lbs. Milk per hour
20839
Kleen-Flo - 57 Plates 6460 lbs. Milk per hour
20843
Kleen-Flo - 57 Plates 3060 lbs. Milk per hour, Dual Pass
STAINLESS STEEL SCREEN
Order #: 20825 - 1½” Screen
20827 - 2” Screen
PLATE FOR M-STYLE PLATE COOLER
Water valves do not come with
plate coolers, but are
recommended.
All plates come with gasket. Due to FDA regulations gaskets are
not sold separately.
Order #: A31441NP - 1” Valve
A31443NP - Valve coil
Page 24
Ver. 2.2 04.11
Order #: A50020NP
Order #: A 50020
Parts Catalog
Detachers
ALLFLEX DETACHERS
Front View
Vacuum operated automatic detacher for Low Line or High Line milking parlors.
Reliable automatic performance minimizes under and over milking. The Allflex
detacher provides low maintenance and is compatible with existing claws.
Side View
STANCHION BARN SEMI-AUTOMATIC DETACHER
The Stanchion Barn Semi-Automatic Detacher
prevents over-milking and allows more effective
use of available labor. The vacuum is reduced to
a safe level before the
milker unit is removed.
Available in both Parlor
and Stanchion Barn
Models.
Order #: 32100NP - Complete take off includes:
Sensor unit, stainless retraction cylinder with
mounting hardware
32101NP - Sensor unit only
98723 - 42” Stainless Cylinder
D32139NP - 90º Bend Adapter
91805 - SS Bracket
STANCHION BARN SEMI-AUTOMATIC DETACHER KIT
The Stanchion Barn SemiAutomatic Detacher Kit converts
the Detacher into a portable
detacher. Fully vacuum operated
and CIP washable. Total weight - 6
pounds.
Order #: 32340NP
Kit includes - Hose Guide, Double
Hanger, Claw Hook, Nylon Pulley with
Bushing, Hose Clamps, Vacuum Tap,
Carrying Handle, Vacuum Hoses
Order #: 94250 - includes Sensor Unit & Vacuum
Cylinder
94240 - Sensor Unit only
94241 - Vacuum Cylinder only
Picture shows detacher mounted with the
detacher kit. Detacher sold separately.
Ver. 2.2 04.11
Page
25
Parts Catalog
Page 26
Ver. 2.2 04.11
Breakdown
Original Standard Claws
9
1
10
2
11
12
18
3
13
4
14
5
6
19
15
7
16
17
8
NO.
PART
DESCRIPTION
NO.
PART
1
MZ10006NP
Dome
10
MZ10012NP
Bobbin Clip
2
MZ10007NP
Pulsator Spring
11
MZ10014NP
Middle „O‟ Ring
3
MZ10005NP
Diaphragm Complete
12
MZ10016NP
Standard Middle (One Line)
4
MZ10022NP
Bobbin Only
13
MZ10017NP
Base „O‟ Ring for One Line
5
MZ10009NP
Bobbin „O‟ Ring
14
MZ10013NP
Standard Super Bowl
15
MZ10030NP
Claw Protector Seal
6
MZ10010NP
Bobbin Housing
16
MZ10002NP
Wash Plug with Strap
7
MZ10028NP
Air Filter
17
MZ10031NP
Claw Hook
8
MZ10015NP
Bobbin Housing Seal
18
10019NP
Standard Repair Kit
9
MZ10011NP
Bobbin Valve
19
10008NP
Bobbin Complete
To Order Call: 1-800-233-6878
DESCRIPTION
Ver 2.0-0310
Page 27
Breakdown
Original MLX Claws
9
1
10
2
11
12
18
3
13
4
14
5
6
15
7
19
16
17
8
NO.
PART
DESCRIPTION
NO.
PART
1
MZ10006NP
Dome
10
MZ10012NP
Bobbin Clip
2
MZ10007NP
Pulsator Spring
11
MZ10014NP
Middle „O‟ Ring
3
MZ10005NP
Diaphragm Complete
12
MZ10068NP
MLX Middle Claw
4
MZ10022NP
Bobbin Only
13
MZ10069NP
MLX Middle Diaphragm
5
MZ10009NP
Bobbin „O‟ Ring
14
MZ10070NP
MLX Super Bowl
6
MZ10010NP
Bobbin Housing
15
MZ10030NP
Claw Protector Seal
7
MZ10028NP
Air Filter
16
MZ10002NP
Wash Plug with Strap
8
MZ10015NP
Bobbin Housing Seal
17
MZ10031NP
Claw Hook
9
MZ10011NP
Bobbin Valve
18
10107NP
MLX Repair Kit
19
10008NP
Bobbin Complete
Note: Countersunk air hole .43”, #57 drill bit
Page 28
Ver 2.0-03.10
DESCRIPTION
To Order Call: 1-800-233-6878
Breakdown
FulFlo Standard Claws
9
1
22
10
11
2
12
3
16
13
4
23
5
17
14
6
21
7
18
15
19
NOTE: Bowls are
available drilled for
shutoff and come less
shutoff parts. Order
bowl drilled for shutoff.
8
NO
PART
1
2
MZ12001NP
FulFlo Dome
MZ10007NP
Pulsator Spring
3
MZ10005NP
Diaphragm Complete
4
MZ10022NP
Bobbin Only
15
5
MZ10009NP
Bobbin “O” Ring
6
MZ10010NP
Bobbin Housing
16 MZ10030NP Claw Protector Seal
7
MZ10028NP
Air Filter
8
9
MZ10015NP
MZ10011NP
Bobbin Housing Seal
Bobbin Valve
10
MZ10012NP
Bobbin Clip
11
MZ10014NP
Middle “O” Ring
21 MZ10031NP Claw Hook
12
MZ12005NP
MZ10017NP
FulFlo Standard Middle
Base “O” Ring
22
10019NP
Standard Repair Kit
23
10008NP
Bobbin Complete
13
DESCRIPTION
20
Note: Hole size for Shut-off Parts - 17/64”.
To Order Call: 1-800-233-6878
NO
PART
DESCRIPTION
MZ12010NP FulFlo Standard Bowl
14
MZ12110NP FulFlo Standard Bowl with ShutOff
MZ12210NP FulFlo Parallel Standard Bowl
MZ12310NP FulFlo Parallel Bowl with ShutOff
17 MZ10002NP Wash Plug
18 MZ12015NP Rubber Foot for ShutOff
19 MZ12017NP ShutOff Button
20 MZ12016NP ShutOff Valve
Ver 2.0-0310
Page 29
Breakdown
FulFlo MLX Claws
1
9
10
2
11
22
12
3
23
13
4
16
14
5
17
6
7
8
18
15
19
NOTE: Bowls are
available drilled for
shutoff and come less
shutoff parts. Order
bowl drilled for shutoff.
21
NO
PART
DESCRIPTION
NO
1
2
MZ12001NP
MZ10007NP
FulFlo Dome
Pulsator Spring
14
3
MZ10005NP
Diaphragm Complete
4
MZ10022NP
Bobbin Only
5
MZ10009NP
Bobbin “O” Ring
6
MZ10010NP
Bobbin Housing
7
8
MZ10028NP
MZ10015NP
Air Filter
Bobbin Housing Seal
9
MZ10011NP
Bobbin Valve
10
MZ10012NP
Bobbin Clip
11
MZ10014NP
Middle “O” Ring
21 MZ10031NP Claw Hook
12
MZ12405NP
MZ10069NP
FulFlo MLX Middle
MLX Diaphragm
22
10107NP
Standard Repair Kit
23
10008NP
Bobbin Complete
13
Note: Countersunk air hole .43”, #57 drill bit
Page 30
Ver 2.0-03.10
15
PART
20
DESCRIPTION
MZ12410NP FulFlo MLX Bowl
MZ12510NP FulFlo MLX Bowl with ShutOff
MZ12610NP FulFlo Parallel MLX Bowl
MZ12710NP FulFlo Parallel Bowl with ShutOff
16 MZ10002NP Wash Plug
17 MZ10030NP Claw Protector Seal
18 MZ12015NP Rubber Foot for ShutOff
19 MZ12017NP ShutOff Button
20 MZ12016NP ShutOff Valve
To Order Call: 1-800-233-6878
Breakdown
Standard Goat Claw
9
1
10
2
11
12
17
3
13
4
14
5
6
18
15
7
16
8
NO.
PART
DESCRIPTION
NO.
PART
1
MZ10006NP
Dome
10
MZ10012NP
Bobbin Clip
2
MZ10007NP
Pulsator Spring
11
MZ10014NP
Middle „O‟ Ring
3
MZ10005NP
Diaphragm Complete
12
MZ10100NP
Standard Goat Middle
4
MZ10022NP
Bobbin Only
13
MZ10017NP
Base „O‟ Ring
5
MZ10009NP
Bobbin „O‟ Ring
14
MZ10106NP
Standard Goat Base
6
MZ10010NP
Bobbin Housing
15
MZ10030NP
Claw Protector Seal
7
MZ10028NP
Air Filter
16
MZ10002NP
Wash Plug
8
MZ10015NP
Bobbin Housing Seal
17
10019NP
Standard Repair Kit
9
MZ10011NP
Bobbin Valve
18
10008NP
Bobbin Complete
To Order Call: 1-800-233-6878
DESCRIPTION
Ver 2.0-0310
Page 31
Breakdown
Pulstar Pulsator
6
1
8
7
2
9
10
3
4
14
5
11
12
13
NO.
PART
DESCRIPTION
NO.
PART
1
MZ12001NP
Pulstar Dome
8
MZ10011NP
Bobbin Valve
2
MZ10007NP
Pulsator Spring
9
MZ10012NP
Bobbin Clip
3
MZ10005NP
Diaphragm Complete
10
MZ10014NP
Middle „O‟ Ring
4
MZ10207NP
Pulstar Bobbin
11
MZ10209NP
Pulstar Base—Dual Outlet
5
MZ10009NP
Bobbin „O‟ Ring
12
MZ10212NP
Pulstar Base—Single Outlet
6
MZ10213NP
Pulstar Bobbin Housing
13
M 10090NP
Pulstar Mounting „O‟ Ring
7
MZ10028NP
Air Filter for Bobbin
14
10120NP
Pulstar Pulsator Repair Kit
Page 32
Ver 2.0-03.10
DESCRIPTION
To Order Call: 1-800-233-6878
Breakdown
Standard & Top Wash Jetter Systems
18
17
8
11
3
1
2
21
12
9
4
5
13
14
6
20
10
7
16
15
19
NO.
NO.
PART
DESCRIPTION
PART
DESCRIPTION
12
MZ13165NP
Jetter Tube (14” for Standard
Jetter—22” for Goat Jetter)
13
MZ10109NP
Tee for Goat Washer Conversion
14
MZ10117NP
Top Wash Jetter Cup
15
MZ10118NP
Top Wash Jetter Cone
16
MZ10102NP
Cap for MLX Jetter
1
MZ10096NP
2” Jetter Clamp
2
M 10090NP
„O‟ Ring for Jetter Mounting Kit
3
M 10098NP
Gasket Adapter for 1-1/2” Line
4
MZ10095NP
Jetter Cover with 2” Saddle
5
MZ10078NP
Jetter Jet Circlip
6
MZ10077NP
Jetter Jet Spacer Ring
17
10129NP
2” Jetter Clamp Kit
7
MZ10083NP
„O‟ Ring for Jetter Jet
18
10128NP
1-1/2” Jetter Conversion Kit
8
MZ10085NP
Large „O‟ Ring for Jetter Base
19
10084NP
9
MZ10094NP
Jetter Base less Jets
Jet Washer Replacement Kit
(includes 4 of each)
10
MZ10079NP
Jetter Jets
20
10115NP
11
MZ10024NP
Jetter Tube Adapter
Top Wash Jetter Replacement
Kit (includes 4 of each)
21
10003NP
Jetter Tube with Adapter
To Order Call: 1-800-233-6878
Ver 2.0-0310
Page 33
Breakdown
1/4HP & 3/4HP Mini Pump Complete
6
7
5
4
3
8
1
2
NO.
DESCRIPTION
1
P41015NP
Mini Vacuum Tank Complete
with lid, gasket, clip & handle
2
R30176NP
Gasket for Plexi Lid—10”
3
P41016NP
Plexi Lid
4
25235
5/8” Clear Tubing (2 ft)
P01199NP
3/4 HP Mini Pump & Motor
P01195NP
1/4 HP Mini Pump & Motor
6
P41011NP
Brass Relief Valve
7
67224
Vacuum Gauge
8
56375
5/8” Flip Up Rubber Closure
5
N/S
Page 34
PART
Ver 2.0-03.10
P01236NP
Cord with 3 prong plug
To Order Call: 1-800-233-6878
Breakdown
Mini Pump & Motor
1/4 HP Pump & Motor
P01195NP
5
4
1
3/4 HP Pump & Motor
P01199NP
6
2
3
7
NO.
PART
1
P41021NP
End Cap for Mini Pump
2
P41022NP
Filter Felt for Mini Pump
3
P41025NP
„O‟ Ring for Mini Pump
P41023NP
Muffler for 3/4 HP Mini Pump
P41033NP
Muffler for 1/4 HP Mini Pump
P41028NP
Housing Gasket for 3/4 HP Mini Pump
P41038NP
Housing Gasket for 1/4 HP Mini Pump
P41020NP
Vane for 3/4 HP Mini Pump
P41030NP
Vane for 1/4 HP Mini Pump
P41024NP
Service Kit for 3/4HP Mini Pump
P41034NP
Service Kit for 1/4 HP Mini Pump
4
5
6
7
To Order Call: 1-800-233-6878
DESCRIPTION
Ver 2.0-0310
Page 35
Breakdown
Allflex Sensor
4
8
7
5
6
3
9
2
14
1
10
15
16
11
12
17
20
19
18
13
DESCRIPTION
NO.
PART
D32150NP
Drain Plug
11
D32096NP
Inlet Valve Slide
2
D32118NP
Canister Clip
12
D32097NP
3
D32122NP
Canister less Plug
Inlet Valve Body includes
Inlet Slide & „O‟ Ring
4
D32110NP
Sensor Tube w/Hole
13
D32117NP
Inlet „O‟ Ring
5
D32120NP
Snorkel
14
D32113NP
Dust Cover
6
D32115NP
Manifold „O‟ Ring
15
D32114NP
Diaphragm
7
D32094NP
Sensor Spacer
16
D32112NP
Diaphragm Cap
8
D32111NP
Outlet Assembly
17
D32119NP
Diaphragm Clip
9
D32103NP
Manifold with ‟O‟ Ring &
Circlip
18
D32107NP
Lever & Cord
19
D32108NP
Circlip for Counterweight
10
D32095NP
Inlet Valve Activator
20
D32102NP
Mounting Bracket
NO
PART
1
Page 36
Ver 2.0-03.10
DESCRIPTION
To Order Call: 1-800-233-6878
Breakdown
Stanchion Barn Detacher—P/N 94250
1
2
14
4
3
5
6
8
7
NO.
PART
DESCRIPTION
1
94204
Sensor Cover
2
94205
Valve Head
3
94220
Sensor Float Assembly
4
94200
Sensor Body
5
94221
Bridle Clip
6
94212
Bung
7
94222
Sensor Holder Bracket
94207
Float Lever with Bung for Sensor
94208
Float Lever with Bung for Reset Timer
9
94218
Piston Washer
10
99708
Piston Seal
11
94216
Bayonet Assembly with Pulley
12
96012
Stainless Replacement Clip
13
98790
3/16” Cylinder Cord (Sold by the
foot—9½ feet required)
14
94225
Reset Timer
8
To Order Call: 1-800-233-6878
9
10
13
11
12
Ver 2.0-0310
Page 37
Breakdown
Page 38
Ver 2.0-03.10
To Order Call: 1-800-233-6878
Breakdown
NOTE: Bowls are available drilled for
shutoff and come less shutoff parts.
Order bowl drilled for shutoff.
To Order Call: 1-800-233-6878
Ver 2.0-0310
Page 39
Breakdown
Page 40
Ver 2.0-03.10
To Order Call: 1-800-233-6878

2011 Parts Catalog

Transcription

Similar documents

Where you come to know.

NB-180 NEWBURG

Utahraptor ostrommaysorum

Johnny Tremain by Esther Forbes Objectives

SKYBOT HAND

official press kit 2015

HOTTIES

ckc- St. LOUIS EXHIBITOR COUPONS 2016

Get It Together!

45 Plateau Incentive Program