hick hargreaves

Transcription

hick hargreaves

2
PAGE
47
Large pumps and
pumping systems
Application and accessory information
50
Oil sealed pumps and accessories
EM oil sealed rotary pumps
Electrical data
Accessories
BOC Edwards Stokes Vacuum oil sealed piston pumps
EVC single stage oil sealed pumps
Accessories
52
56
56
60
68
83
GV/GVM Drystar® pumps and accessories
GV industrial dry pumps
GVM industrial dry pumps
GV dry pump packaged solutions
Dry pumping combinations
Accessories
89
93
96
97
99
Mechanical booster pumps
EH mechanical booster pumps
EDD mechanical booster pumps
MB mechanical booster pumps
BOC Edwards Stokes Vacuum booster pumps
HV high capacity mechanical booster pumps
104
114
116
121
125
BOC Edwards Stokes Vacuum multistage
vacuum systems
Series MB
Series 1800
Series 1700
129
130
134
BOC Edwards has purchased the vacuum and pressure interests of
The Smiths Group. The businesses acquired, were part of Smith's
Sealing Solutions Division, and are comprised of Stokes Vacuum,
Hick Hargreaves, Hibon and Wilhelm Klein (WKE). This section
reflects the Stokes Vacuum product lines now sold by
BOC Edwards.
shop online: www.bocedwards.com
The dimension drawings in this section display both metric and imperial measurements. Imperial measurements are shown in brackets.
LARGE PUMPS AND PUMPING SYSTEMS
Introduction
2
PAGE
48
BOC Edwards range of mechanical boosters, oil sealed rotary pumps, oil
sealed piston pumps and GV industrial dry pumps is the most comprehensive available to the industrial user. Add our extensive range of accessories,
and the pumps can be configured for a wide range of applications. The
pumps and accessories can be supplied either as individual components or
as fully systemized, factory tested combinations.
EVC oil sealed rough-pumps
A revised range of vacuum pumps for industrial applications requiring
rough vacuum providing an economical solution.
• Gas ballast as standard
• Vacuum non return valve
• Extended range
• Improved ultimate vacuum
• Stainless steel mesh inlet filter
The range consists of:
• EM oil sealed rotary vane pumps
• BOC Edwards Stokes Vacuum oil sealed piston pumps
• EVC oil sealed rotary vane pumps
• GV Drystar® dry pumps
• EH, EDD, MB, BOC Edwards Stokes Vacuum 6" and HV booster pumps
EM oil sealed rotary pumps
PHOTO REQUIRED
GVM Drystar® dry pumps
BOC Edwards rugged mechanical oil sealed pumps are available in sizes
from 40 to 275 m3h-1 / 30-206 ft3min-1, in both one and two stage designs.
They feature:
• Advanced oil lubrication circuit
• High reliability
• Accessories to match your application needs
BOC Edwards Stokes Vacuum oil sealed piston pumps
BOC Edwards Stokes Vacuum oil sealed piston pumps are available in sizes
50-1240 m3h-1 / 30-728 ft3min-1. They feature:
• Rugged design
• Internal oil piping to eliminate potential leaks
• Oil sight glass and flow indicator to provide easy monitoring of oil level
and flow
• ‘O’ ring sealed covers to eliminate potential oil leaks
• Integral gas ballast valve
The Drystar® GV260M - 600M range is based on the well proven BOC
Edwards patented claw mechanism but has an additional roots stage,
enhancing pumping speed in the working range and reaching a peak speed
of up to 560 m3h-1 / 330 ft3min-1.
The patented claw mechanism results in short gas paths within the operating mechanism, providing the ability to handle large amounts of dust and
water vapor, when compared to oil sealed pumps, without deterioration
of performance.
• Low cost of ownership in harsh conditions
• High reliability - dry mechanism proven in 60,000 installations
• Oil free mechanism - reduced maintenance
• Higher dust and water vapor tolerance
• Accessories to optimize pump performance to process variables
• Fast pump down with BOC Edwards hydrokinetic drive booster pumps.
For North American orders shop online: www.bocedwards.com or call: 1-800-848-9800
EH mechanical boosters
BOC Edwards Stokes Vacuum 6" mechanical booster
pumps
2
PAGE
49
The EH mechanical booster pumps feature the unique hydrokinetic drive,
providing an efficient power transmission with benefits in economy, performance and compactness. The hydrokinetic drive provides the following
features:
• Pump down times cut by 50%, when compared with direct drive pumps
• No bypass lines or pressure switches required
• Universal voltage motors
• Reduced capital and operating costs
• Air cooled motors - with water cooled options
• Quiet, vibration free operation
BOC Edwards Stokes Vacuum 6" mechanical boosters are available in sizes
1020-5100 m3h-1 / 600-3000 ft3min-1. Features include:
• Rugged design for reliable and extended operation
• Simple maintenance features incorporated in design
• Options of direct drive motors or bare shaft machines
• Options of by pass technology to reduce pump down time
• Dynamically balanced impellers
HV mechanical booster pumps
We also offer the EDD mechanical booster pumps - with direct drive. For
more information, see page 101.
PHOTO REQUIRED
We offer a range of large direct drive mechanical booster pumps, from
11000 m3h-1 to 30000 m3h-1 / 7900 ft3min- to 17100 ft3min-1(see page
103). The speed of the pump motor can be controlled by an inverter.
BOC Edwards MB mechanical boosters are available in sizes
800-5700 m3h-1 / 477-3357 ft3min-1. They feature:
• Cartridge seal design
• Options on bare shaft, direct drive motors and variable speed drives to
suit all applications.
• Air cooled motors and pumps
• Dynamically balanced and vibration free
In addition, the pumps offer the following features:
• Water cooled shaft seals and after cooler
• Fitted with thermal snap-switch, to protect the pump from over
temperature
• Nitrogen purge inlet fitted as standard
• Vertical flow, direct drive
• Control with inverter, or interlock with a pressure switch input.
Systemization
BOC Edwards comprehensive range of pumps forms the basis for the manufacture of factory tested combination systems, with displacements from
310 m3h-1 to 30,000 m3h-1 / 180 ft3min-1to 17700 ft3min-1. With a wide
and robust range of accessories to choose from, the pumping system can
be optimized for your application. BOC Edwards systemization service
offers fully factory tested combinations with appropriate accessories.
PHOTO REQUIRED
APPLICATION AND ACCESSORY
INFORMATION
2
PAGE
50
The use of BOC Edwards mechanical booster pumps and rotary pumps
with our comprehensive range of accessories will result in enhanced performance and reliability. The information below will help you to select the
correct accessories for your application. However, we recommend that
you treat this as a guide only, because the final selection of components
can be influenced by the operation of your vacuum system and the process
by-products. If in doubt, please contact BOC Edwards or your local supplier for further advice from an BOC Edwards application specialist.
When you select accessories for your system, the major aim is to prolong
the life and the safe operation of the pumps and to ensure that the system
continues to perform at its ultimate specification. To do this, you need to
ensure that the system is able to accommodate the process media and any
process by-products, including vapors, liquids or particulates, which may
damage the pumps. At the same time, you should ensure that any materials
discharged from the system to atmosphere are not harmful to the environment and to people nearby.
Trapping particulates
In any application, first ensure that particulates in the process stream are
trapped before they get into the pump: use the ITM or ITF inlet filters
which are suitable for use with oil-sealed and dry pumps. However, in processes which generate or contain large amounts of particulates, some will
enter the pump: use our EOF an external oil filter to remove particulates
from the pump oil during operation.
ITF inlet dust filters If the mechanical pump is a backing pump for a
diffusion pump, the diffusion pump will trap particulates during normal
operation, but the diffusion pump will not trap dust during the roughing
stage of the process cycle. We recommend you fit an ITF filter to the
mechanical pump inlet (that is, in the foreline): this filter has a replaceable
element. Note that the impedance of a clean filter will cause the pumping
speed to decrease by about 10% at 1mbar and 20% at 10-2 mbar. The ITF
filter is more that 96% efficient, when tested in accordance with BS2831.
ITM high capacity inlet dust filters Use an ITM filter for applications
where there is a high load of dust and particulates. Fit the ITM directly to
the inlet of a rotary or mechanical booster pump. This filter has a stainless
steel mesh element that can be washed and re-used. It is ideal for use when
backing diffusion pumps or for wet processes where a paper filter may
become blocked quickly. The ITM filter has high conductance and is therefore ideal for applications which require fast pump down times. The ITM
filter has an efficiency of 90%, when tested in accordance with BS3831.
EOF external oil filters Use the EOF’s with the EM oil-sealed rotary
pumps, to remove particulates trapped in the pump oil. There are two
types of EOF filter.
The EOFA and EOFM filters use the internal pressurized oil system of the
pump to continually filter a proportion of the pump oil. These filters are
only suitable for hydrocarbon oil. The EOFM filter removes particulates
down to 0.5 microns, and the EOFA filter both removes particulates and
includes an active element to remove acidic and other aggressive contaminants from the oil.
EOF pumped external oil filters have their own oil re-circulation pump.
The re-circulation pump has a high flow rate and allows large quantities of
oil to be filtered. The filter is fitted with a gauge which indicates when the
filter need to be changed. This filter is suitable for hydrocarbon and PFPE
oils.
Pumping vapors
The use of gas ballast significantly improves vapor handling capability of oil
sealed rotary pumps. We offer a number of accessories to improve the
utility of gas ballast.
TCV temperature control valve The vapor pumping performance of
the larger oil sealed pumps can be enhanced by fitting a TCV. Use the TCV
both to warm-up the pump faster (which reduces the amount of condensation in the pump) and to reduce water usage and cost.
ITC inlet chemical traps Fit an ITC trap to the inlet of the pump to
protect against the aggressive process vapors that may corrode the pump
or degrade the oil.
Trapping liquids
The use of gas ballast allows an oil sealed pump to process significant quantities of vapor. However, oil sealed pumps can not pump liquid streams and
it is important both to remove liquids before they reach the pump inlet and
to prevent condensed liquids from flowing back into the pump outlet. The
following accessories may be suitable for your application:
ITO inlet trap The ITO inlet trap is ideal for processes where there is
a risk of liquids in the process entering the pump inlet. Fit the ITO trap to
the pump inlet or elsewhere in the foreline.
CP catchpot Process vapors passing through the pump may condense
after the pump outlet, in the exhaust line. Fit a CP catchpot to the pump
outlet to trap the condensates and prevent them flowing back into the
pump.
Exhaust management
You should aim to minimize the impact of gases and vapors which exhaust
from the pump outlet. BOC Edwards offers a range of exhaust management systems for the most exacting applications (see page 223). However,
for most straight-forward applications of oil sealed rotary pumps, we recommend that you fit an oil mist filter to the pump outlet to remove oil mist
vapor. A mist filter is not required if you vent the exhaust gases remotely
or pass them through exhaust scrubbing equipment.
MF oil mist filters The MF filters remove oil mist (vapor) from the process gases exhausted from the outlet of an oil sealed pump. The filters
remove both odor and oil vapor and so prevent it from reaching the atmosphere and the workplace.
Back migration
When operated at ultimate pressure for extended periods of time, any oil
sealed pump allows oil vapor to back migrate into the process chamber.
The back-migration of oil vapor could contaminate your process or your
vacuum system.
ITC inlet chemical trap Fit an ITC inlet chemical trap (filled with an
alumina charge) to the pump inlet to trap oil vapor and to prevent back
migration.
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Refrigeration dehydration
Brake line evacuation
TV aluminizers
Vacuum metallurgy
Fluorescent light tube pumping
Thin film coating
IT hard disc coating
Vacuum distillation
Cryogenic vessel evacuation
Transformer and cable drying
Pharmaceutical freeze drying
Space simulation
Crystal growing
Automotive
Chemical processing
EBV gas ballast control valve Fit EBV gas ballast control valve to
allow remote or automated control of gas ballast.
DATA SUMMARY
2
PAGE
51
E1M40
Catalog page
Displacement 50 Hz
60 Hz
Speed
50 Hz
60 Hz
Number of stages
Ultimate vacuum (total pressure)
without gas ballast
with gas ballast
Maximum water vapor inlet
pressure
Maximum water vapor pumping
rate
Pump connections
Inlet
Outlet
Motor protection rating
Motor power 50 Hz
Motor power 60 Hz
Weight
Oil capacity - maximum
- minimum
m3h-1
m3h-1
m3h-1
m3h-1
E2M40
/ ft3min-1
/ ft3min-1
/ ft3min-1
/ ft3min-1
E2M80
53
80 / 47.1
96 / 56.5
74 / 43.6
90 / 53
1
2
1
2
mbar / Torr
mbar / Torr
mbar / Torr
0.1 / 7.5 x 10-2
0.5 / 3.75 x 10-1
40 / 30
0.001 / 7.5 x 10-4
0.007 / 5.25 x 10-3
7 / 5.3
0.07 / 5.25 x 10-2
0.4 / 3 x 10-1
30 / 22.5
0.001 / 7.5 x 10-4
0.007 / 5.25 x 10-3
5 / 3.8
kg h-1 / lb h-1
1.1 / 2.4
0.2 / 0.4
1.7 / 3.8
0.7 / 0.3
ISO40
25 mm flange
IP
kW / hp
kW / hp
kg / lb
liter / qt
liter / qt
PUMP
m3h-1
m3h-1
m3h-1
m3h-1
70.5 / 155
4.6 / 4.8
2.2 / 2.3
kg h-1 / lb h-1
72 / 159
4.07 / 4.3
2.2 / 2.3
95 / 210
7.0 / 7.3
4.0 / 4.2
E2M175
E1M275
54
178 / 105
214 / 126
160 / 94
196 / 115
/ ft3min-1
/ ft3min-1
/ ft3min-1
/ ft3min-1
mbar / Torr
mbar / Torr
mbar / Torr
44 or 542
2.2 / 3
3/4
44 or 541
1.1 / 1.5
1.5 / 2
E1M175
Catalog page
Displacement 50 Hz
60 Hz
Speed
50 Hz
60 Hz
Number of stages
Ultimate vacuum (partial pressure)
without gas ballast
with gas ballast
Maximum water vapor inlet
pressure
Maximum water vapor pumping
rate
Pump connections
Inlet
Outlet
Motor protection rating
Motor power 50 Hz
Motor power 60 Hz
Weight
Oil capacity - maximum
- minimum
E1M80
52
42.5 / 25
50.5 / 29.7
37 / 21.8
44 / 25.9
105 / 231
6.3 / 6.7
4.0 / 4.2
E2M275
55
292 / 172
350 / 206
255 / 150
306 / 180
1
2
1
2
0.07 / 5.25 x 10-2
0.4 / 3 x 10-1
50 / 38
0.001 / 7.5 x 10-4
0.005 / 3.75 x 10-3
20 / 15
0.09 / 6.75 x 10-2
0.6 / 4.5 x 10-1
50 / 38
0.001 / 7.5 x 10-4
0.005 / 3.75 x 10-3
12 / 9
5.8 / 12.8
2.4 / 5.3
9.2 / 20.3
2.3 / 5.1
ISO63
ISO40
IP
kW / hp
kW / hp
kg / lb
liter / qt
liter / qt
44
5.5 / 7.5
6.5 / 8.5
194 / 428
25 / 26
16 / 17
44
7.5 / 10
8.5 / 11
200 / 441
25.0 / 26
16.0 / 17
220 / 485
28 / 29.5
19 / 20
1IP44:
A344-01-935, A364-01-935, A364-11-935 IP54: A344-02-982, A364-02-982, A364-12-982
2IP44: A345-01-935, A365-01-935, A365-11-935 IP54: A345-02-982, A365-02-982, A365-12-982
225 / 496
28.0 / 29.5
19.0 / 20
PUMP
E1M40 ONE STAGE, E2M40 TWO STAGE
42.5 m 3 h -1 , 25 ft 3 min -1 , 700 l min -1
10
1
ft 3 min -1
10
2
2
PAGE
52
1
10
2
1
0
E2M40
10
2
E1M40
60Hz
-1
10
-4
10
1
-3
10
without gas ballast
-2
10
2
-1
10
0
10
1
10
2
Torr
with gas ballast
191 (7.52)
42.5 m3h-1 / 25 ft3min-1
50.5 m3h-1 / 29.7 ft3min-1
ISO40
m 3 h -1
NW25
240 (9.45)
50
(1.97)
45˚
ORDERING INFORMATION
PRODUCT DESCRIPTION
40 mbar / 30 Torr
7 mbar / 5.3 Torr
1.1 kgh-1 / 2.4 lb h-1 0.2 kgh-1 / 0.4 lb h-1
70.5 kg / 155 lb
72 kg / 159 lb
1.1 kW
1.5 kW / 2 hp
4.6 liter / 4.8 qt
4.07 liter / 4.3 qt
2.2 liter / 2.3 qt
-
3.5 liter / 3.2 qt
1.32 liter / 1.6 qt
Ultragrade 70
70.5
72
3
4
E1M40
E1M40
E2M40
E2M40
E2M40
E2M40
220-240 V or 380-415 V 3-ph 50 Hz
230-460 V 3-ph 60 Hz
220-240 V or P380-415 V 3-ph 50 Hz
PFPE version of above*
230-460 V 3-ph 60 Hz
PFPE version of above*
ORDERING NUMBER
A344-01-935
A344-02-982
A364-01-935
A364-11-935
A364-02-982
A364-12-982
Ultragrade 70 oil, NW40 ‘ O’ ring and centering ring, ISO 40 ‘ C’ clamp, bolts, washers, 28 mm external
diameter coupling tube and compression sleeve for outlet, ISO 25 ‘ C’ clamp, bolts and washers supplied
with each pump
* No oil supplied
SPARES
ORDERING NUMBER
The clean and overhaul kit contains all of the springs, gaskets, seals and other
components required for routine maintenance and whenever the pump is dismantled.
Add a blade kit for a full service. The major service kit contains gaskets, seals, filters,
blades, bearings and other components required for a complete service after prolonged
operation or after pumping corrosive or gases and vapors.
Clean and overhaul kit
A344-01-131
E1M40 Blade kit
A344-01-050
E2M40 Blade kit
A364-01-050
E1M40 Major service kit
A344-01-815
A364-01-815
0
ACCESSORIES
E2M40
10
25
(0.98)
0.5 bar gauge
1
2
500 (19.69)
4 x M8 x 15 (0.59)
2
1
4 x Ø12 (0.47)
665 (26.18)
1.0 × 10-3 mbar
1.0 × 10-1 mbar
7.7 x 10-4 Torr
7.7 × 10-2 Torr
7.0 × 10-3 mbar
5.0 × 10-1 mbar
3.8 x 10-1 Torr
5.4 x 10-3 Torr
ISO40
25 mm flange suitable for NW25
Inlet connection
Outlet connection
Maximum permitted pressure
at outlet
Maximum inlet pressure for
water vapor
Maximum water vapor
pumping rate
Weight
Motor power 50 Hz - 4 pole
Standard oil capacity
Maximum
Minimum
PFPE oil capacity
Maximum
Minimum
Recommended oil (supplied)
Noise level dB(A)
10
220 (8.66)
87
87
(3.43) (3.43)
37.0 m3h-1 / 21.8 ft3min-1
44 m3h-1 / 25.9 ft3min-1
with gas ballast
10
E2M40
120
(4.72)
E1M40
Displacement (swept volume)
50 Hz
60 Hz
Speed (Pneurop)
50 Hz
60 Hz
without gas ballast
397 (15.63)
395 (15.55)
TECHNICAL DATA
10
40
E1M40
50Hz
-1
10
10
-4
10
-2
10
-3
-1
10
10
-2
0
10
10
-1
1
10
10
0
2
10
10
1
3
10
10
2
4
mbar
Pa
1
50 Hz E2M40 without gas ballast
2
50 Hz E2M40 with gas ballast
3
4
MF100 outlet mist filter
MF100AE outlet mist filter
Vibration isolators (set of 4)
ORDERING NUMBER
A462-03-000
A462-11-000
A248-01-405
For electrical data, including recommended fuse ratings, see page 56. For
accessories, see page 56. For rotary pump oils, see page 489.
80 m 3 h -1 , 47 ft 3 min -1 , 1333 l min -1
10
1
ft 3 min -1
10
2
1
10
2
1
2
PAGE
53
E2M80
E1M80
60Hz
-1
10
-4
10
1
-3
10
without gas ballast
-2
10
2
-1
10
0
10
1
10
2
Torr
with gas ballast
220 (8.66)
80 m3h-1 / 47.1 ft3min-1
96 m3h-1 / 56.5 ft3min-1
10
2
PRODUCT DESCRIPTION
30 mbar / 22.5 Torr
5 mbar / 3.8 Torr
1.7 kgh-1 / 3.8 lb h-1 0.3 kgh-1 / 0.7 lb h-1
95 kg / 210 lb
105 kg / 231 lb
2.2 kW
3 kW / 4 hp
7 liter / 7.3 qt
-
6.37 liter / 6.7 qt
4 liter
4.01 liter / 4.2 qt
2.19 liter / 2.3 qt
Ultragrade 70
70
70
E1M80
E2M80
E1M80
E2M80
220-240
220-240
208-230
208-230
V
V
V
V
or
or
or
or
ORDERING NUMBER
380-415
380-415
460 V 3
460 V 3
V 3 ph 50 Hz
V 3 ph 50 Hz
ph 50/60 Hz
ph 50/60 Hz
E1M80
50Hz
-1
10
10
10
-2
10
-1
10
10
-2
0
10
10
-1
1
10
10
0
2
10
10
1
3
10
10
2
4
mbar
SPARES
2
3
4
ORDERING NUMBER
A345-01-131
E1M80 Blade kit
A345-01-050
E2M80 Blade kit
A365-01-050
A345-01-814
A365-01-814
ORDERING NUMBER
A462-03-000
A462-11-000
A248-01-405
Pa
1
A345-01-935
A365-01-935
A345-02-982
A365-02-982
Ultragrade 70 oil, NW40 ‘ O’ ring and centering ring, ISO 40 ‘ C’ clamp, bolts, washers, 28 mm external
diameter coupling tube and compression sleeve for outlet, ISO 25 ‘ C’ clamp, bolts and washers supplied
with each pump
* No oil supplied
ACCESSORIES
4
0
-3
430 (16.93)
133
(5.24)
266 (10.47)
0.5 bar gauge
MF100AE outlet mist filter
-4
NW25
45˚
1.0 × 10-3 mbar /
7.0 × 10-2 mbar /
-2 Torr
7.7 × 10-4 Torr
5.4 × 10
7.0 × 10-3 mbar /
4.0 × 10-1 mbar /
3.1 × 10-1 Torr
5.4 × 10-3 Torr
ISO40
25 mm flange suitable for NW25
3
E2M80
10
ISO40
25
(0.98)
4 x M8 x 15 (0.59)
1
1
550 (21.65)
74 m3h-1 / 43.6 ft3min-1
90 m3h-1 / 53 ft3min-1
2
m 3 h -1
10
255 (10.04)
4 x Ø12 (0.47)
98
98
(3.86) (3.86)
795 (31.30)
with gas ballast
10
E2M80
53
(2.09)
E1M80
50 Hz
60 Hz
Speed (Pneurop)
50 Hz
60 Hz
without gas ballast
Inlet connection
Outlet connection
at outlet
water vapor
Maximum water vapor
pumping rate
Weight
Standard oil capacity
Maximum
Minimum
PFPE oil capacity
Maximum
Minimum
Noise level dB(A)
80
428 (16.85)
TECHNICAL DATA
10
2
0
2
ft 3 min -1
10
3
2
PAGE
54
1
10
2
1
2
1
E2M175
E1M175
60Hz
0
10
-4
10
1
155
(6.1)
-3
10
-2
10
without gas ballast
2
226
(8.9)
-1
10
0
10
1
10
2
Torr
with gas ballast
938 (36.93)
2
(0.08)
10
55
(2.17)
13
(0.51)
10
14
(0.55)
178 m 3 h -1 , 105 ft 3 min -1 , 2967 l min -1
F
54
(2.13)
with gas ballast
Inlet connection
Outlet connection
at outlet
water vapor
Maximum water vapor
pumping rate
Recommended cooling water
flow at 20 °C
Weight
Standard oil capacity maximum
Standard oil capacity minimum
PFPE oil capacity maximum
PFPE oil capacity minimum
Noise level dB(A)
10
2
0.5 bar gauge
20 mbar / 15 Torr
5.8 kgh-1 / 12.8 lb h-1 2.4 kgh-1 / 5.3 lb h-1
80 l h-1
194 kg / 428 lb
200 kg / 441 lb
5.5 kW
6.5 kW / 8.5 hp
25 liter / 26 qt
16 liter / 17 qt
18 liter / 19 qt
6.5 liter / 6.9 qt
Ultragrade 70
75
75
3
4
1
E1M175
800 (31.50)
4 x Ø14 (0.55)
112
(4.41)
329 (12.95)
ISO63
196 (7.72)
30
(1.18)
ISO40
404 (15.91)
1.0 × 10-3 mbar /
7.0 × 10-2 mbar /
7.7 × 10-4 Torr
5.4 × 10-2 Torr
-1 mbar /
5.0 × 10-3 mbar /
4.0 × 10
3.1 × 10-1 Torr
3.8 × 10-3 Torr
ISO 63 blank flange with seal
ISO 40 flange center tapped 1½ inch BSP
50 mbar / 38 Torr
390 (15.35)
4 x M10
388 (15.28)
160 m3h-1 / 94 ft3min-1
196 m3h-1 / 115 ft3min-1
E2M175
10
E
290 (11.42)
2
1
10
145
(5.72)
D
3
m 3 h -1
10
178 m3h-1 / 105 ft3min-1
214 m3h-1 / 126 ft3min-1
C
50Hz
45 ˚
45 ˚
128 113
(5.04) (4.45)
50 Hz
60 Hz
Speed (Pneurop)
50 Hz
60 Hz
without gas ballast
E2M175
159
(6.26)
E1M175
175
248
(9.76)
TECHNICAL DATA
518 (20.39)
A
B
237 (9.33)
A
Union for oil return connection
D
Oil drain tap (tapped ½ in BSP)
from oil mist filter
E
Oil filter mounting plate (allow 330 mm to
withdraw filter from pump)
B
Gas ballast control valve
C
Water connections (tapped £/8 in BSP)
F
Oil pressure take-off (tapped !/8 in BSP)
PRODUCT DESCRIPTION
E1M175
E2M175
E1M175
E2M175
220-240 V or 380-415 V
220-240 V or 380-415 V
230 V or 460 V 3-ph 60
230 V or 460 V 3-ph 60
ORDERING NUMBER
3-ph 50 Hz
3-ph 50 Hz
Hz
Hz
A346-01-935
A366-01-935
A346-03-982
A366-03-982
Ultragrade 70 oil supplied with each pump
* No oil supplied
SPARES
ORDERING NUMBER
E1M175 Clean and overhaul kit
A346-01-131
A366-01-131
E1M175 Blade kit
A346-01-134
E2M175 Blade kit
A347-01-134
A346-01-831
A366-01-831
E1M175 Complete interior assembly
A346-01-100
A366-01-100
0
10
10
-4
10
-2
10
-3
-1
10
10
-2
0
10
10
-1
1
10
10
0
2
10
10
1
3
10
10
2
4
ACCESSORIES
mbar
Pa
1
2
3
4
ORDERING NUMBER
A462-04-000
A248-01-406
2
ft 3 min -1
10
3
1
10
2
1
PAGE
55
E2M275
E1M275
60Hz
0
-4
10
1
155
(6.1)
-3
10
-2
without gas ballast
10
2
226
(8.9)
-1
10
0
10
1
10
2
Torr
with gas ballast
1036 (40.79)
2
(0.08)
10
55
(2.17)
F
54
(2.13)
TECHNICAL DATA
292 m3h-1 / 172 ft3min-1
350 m3h-1 / 206 ft3min-1
0.5 bar gauge
12 mbar / 9 Torr
9.2 kgh-1 / 20.3 lb h-1 2.3 kgh-1 / 5.1 lb h-1
120 l h–1 / 0.53 US g min-1
220 kg / 484 lb
225 kg / 495 lb
7.5 kW / 10 hp
8.5 kW / 11 hp
28 liter / 29.5 qt
19 liter / 20 qt
18 liter / 19 qt
7 liter / 7 qt
Ultragrade 70
75
75
3
2
m 3 h -1
10
1
10
2
3
4
1
E2M275
10
E1M275
50Hz
10
10
-2
10
10
-3
-1
10
10
-2
0
10
10
-1
10
1
10
0
2
10
10
1
3
10
10
112
(4.41)
425 (16.73)
ISO63
294 (11.58)
30
(1.18)
ISO40
45 ˚
2
4
1
2
3
4
mbar
Pa
128 113
(5.04) (4.45)
45 ˚
333 (13.11)
A
Union for oil return connection from
D
Oil drain tap (tapped ½ in BSP)
oil mist filter
E
Oil filter mounting plate (allow 330 mm to
B
Gas ballast control valve
C
Water connections (tapped £/8 in BSP)
withdraw filter from pump)
F
Oil pressure take-off (tapped !/8 in BSP)
PRODUCT DESCRIPTION
E1M275
E2M275
E1M275
E2M275
220-240 V or 380-415 V 3 ph 50 Hz
220-240 V or 380-415 V 3 ph 50 Hz
230 V or 460 V 3 ph 60 Hz
230 V or 460 V 3 ph 60 Hz
ORDERING NUMBER
A347-01-935
A367-01-935
A347-03-982
A367-03-982
Ultragrade 70 oil supplied with each pump
SPARES
ORDERING NUMBER
A346-01-131
A366-01-131
E1M275 Blade kit
A347-01-134
E2M275 Blade kit
A347-01-134
A347-01-831
A367-01-831
A347-01-100
A367-01-100
ACCESSORIES
0
-4
800 (31.50)
404 (15.91)
1.0 × 10-3 mbar
9.0 × 10-2 mbar
-2 Torr
7.7 × 10-4 Torr
6.9 × 10
6.0 × 10-1 mbar
5.0 × 10-3 mbar
4.6 × 10-1 Torr
3.8 × 10-3 Torr
ISO 63 blanking flange with seal
ISO 40 flange center tapped 1½ in BSP
50 mbar / 38 Torr
390 (15.35)
4 x M10
4 x Ø14 (0.55)
388 (15.28)
255 m3h-1 / 150 ft3min-1
306 m3h-1 / 180 ft3min-1
1 Fitted with thermostatic control valve
10
E
290 (11.42)
with gas ballast
Inlet connection
Outlet connection
at outlet
water vapor*
Maximum water vapor
pumping rate
Recommended cooling water
flow at 20 °C
Weight
Standard oil capacity maximum
Standard oil capacity minimum
PFPE oil capacity maximum
PFPE oil capacity minimum
Noise level dB(A)
145
(5.72)
D
248
(9.76)
50 Hz
60 Hz
Speed (Pneurop)
50 Hz
60 Hz
without gas ballast
C
E2M275
159
(6.26)
E1M275
275
518 (20.39)
A
B
ORDERING NUMBER
A462-04-000
A248-01-406
10
2
2
1
13
(0.51)
10
14
(0.55)
292 m 3 h -1 , 172 ft 3 min -1 , 4867 l min -1
ELECTRICAL DATA
2
PAGE
56
LARGE PUMP ACCESSORIES
The table shows current data and suggests a suitable fuse rating. Starting
current is drawn for less than one second and slow blow fuses should be
used to prevent unnecessary rupture during starting. Pump outfits are
rated for operation above 12°C / 54°F. Pump starting at temperatures
lower than 12°C / 54°F will increase the current drawn due to the higher
start torque required. This may cause the motor thermal overload to trip.
2
3
1
Three-phase motors should be protected by a starter consisting of a suitably rated contactor and thermal overload. The trip current regulator on
the thermal overload should be set according to the starter manufacturers'
instructions.
FULL LOAD
START
CURRENT (A) CURRENT (A)
Electrical supply
E1M40/E2M40
220-240 V 3 ph 50 Hz
380-415 V 3 ph 50 Hz
230 V 3 ph 60 Hz
460 V 3 ph 60 Hz
E1M80/E2M80
220-240 V 3 ph 50 Hz
380-415 V 3 ph 50 Hz
230 V 3 ph 60 Hz
460 V 3 ph 60 Hz
E1M175/E2M175
220-240 V 3 ph 50 Hz
380-415 V 3 ph 50 Hz
230 V 3 ph 60 Hz
460 V 3 ph 60 Hz
E1M275/E2M275
220-240 V 3 ph 50 Hz
380-415 V 3 ph 50 Hz
230 V 3 ph 60 Hz
460 V 3 ph 60 Hz
50 Hz
60 Hz
4.5
2.6
50 Hz
60 Hz
25
14
6.5
3.1
SUGGESTED
FUSE RATING
(A)
39
18.6
4
15
10
25
15
5
8
8.5
4.9
51
29
11.8
5.6
19.7
11.40
71
34
30
20
40
20
145
69
60
35
80
40
186
93
100
50
100
50
118
68
24.2
11.5
26.8
15.5
160
93
31.8
15
Minimum starting voltage is 10% below lowest nominal voltage.
6
7
1
Inlet dust filter
2
Inlet catchpot
3
Outlet catchpot
4
Oil level monitor (E1/2M40 + E1/2M80 only)
5
Thermostatic control valve (E1/2M175 + E1/2M275 only)
6
Vibration isolators
7
Pumped external oil filter
8
External oil filter
Industrial wet pumps are used in a wide variety of applications and produce
reliable vacuum for many processes. To optimize the installation and to
prolong pump life, BOC Edwards offer a range of accessories for our large
oil-sealed pumps. Our pumps and accessories are designed to ensure that
accessories are easy to install.
We offer inlet and exhaust traps and filters, together with external oil filtration and oil pressure monitoring, pump temperature control and vibration isolators.
MF OUTLET MIST FILTERS
The MF30, MF100 and MF300 mist filters are suitable for pumps from
E2M28 to E2M275. They are very efficient at 99.85% DOP test (pre-wetted
filter; 99.5% with dry element). The oil level sight-glass provides easy monitoring of mist filter status.
PRODUCT DESCRIPTION
Model MF100 mist filter (12 kg/26.5 lb)1
Model MF100AE mist filter (12 kg/26.5 lb)1
Model MF300 mist filter (28 kg/62 lb)2
ORDERING NUMBER
A462-03-000
A462-11-000
A462-04-000
1Supplied with two NW25 ‘ C’ clamps, NW25 elbow, two NW25 centering ring and ‘ O’ rings,
bolts, washers, mounting brackets and studs
2Supplied with two ISO40 ‘ C’ clamps, ISO40 elbow, two 40 mm Co-Seals, bolts, washers, mounting
brackets and studs
A version of the EMF clean application oil return kit is available for all the
MF filters, except the MF100AE.
MF100
MF100AE
MF300
Spares kits
MF100, MF100AE
MF300
MF100AE sight-glass kit
MF100, CP100 and MF100AE
91
(3.58)
386 (15.20)
32.5
(1.28)
1.69
(43)
NW25
ACCESSORIES
Clean application oil return kit (E1M40 to E2M80)
Clean application oil return kit (E1M175 to E2M275)
SPARES
ORDERING NUMBER
A500-04-000
A500-05-000
ORDERING NUMBER
A223-04-020
A223-04-052
A223-04-021
A462-03-800
A462-04-800
A500-80-000
19
(0.75)
CP OUTLET CATCHPOTS
½" BSP
203 (7.99)
32
(1.26)
2 x M10
65
(2.56)
344 (13.54)
21
(0.83)
29
(1.14)
273 (10.75)
86
(3.39)
1" BSP
150 (5.91)
112
(4.41)
25
(0.98)
MF300 and CP300
50
(1.97)
524 (20.63)
25 (0.98)
In some industrial applications it is desirable for pumps to be provided with
piped exhaust arrangements to carry gases and vapors to the outside of
the building.
65
(2.56)
½" BSP
50
(1.97)
2 x M10
27
(1.06)
202 (7.95)
58 (2.28)
52.5
(2.07)
390 (15.35)
561 (22.09)
450 (17.72)
58 (2.28)
50
(1.97)
488 (19.21)
185 (7.28)
119
(4.69)
40 (1.57)
27
(1.06)
There is always a risk that some vapor carried out with the effluent gas will
cool and condense as it travels up the exhaust line and the liquid produced
will drain back into the pump causing serious contamination.
For this reason, it is good practice to use a catchpot between the pump
outlet and the exhaust line to prevent this from happening.
These catchpots are designed for fitting directly to the pump outlet, or can
be remotely mounted if required. A ‘high level’ sight glass is provided to
indicate the need for draining the catchpot when the nominal capacity is
reached. A drain plug is also provided.
Note: When an oil mist filter is used, a separate catchpot is generally
unnecessary.
IS040
23 (0.91)
2
PAGE
57
The MF100AE is a version of the MF100, designed for use with corrosive
gases and vapors and for greater security when processing toxic substances. It is very efficient at 99.1% DOP test (pre-wetted; 98.4% with dry
element). This version is leak tested to 1 × 10-4 mbar l s-1 / 3.8 x 10-3 Torr.
The filter element, sight-glasses and seals are resistant to chemical attack.
The MF100AE is fitted with an acrylic sight-glass (for use with fluorinated
processes); a glass sight-glass is also supplied with the filter (for use with
chlorinated processes).
PRODUCT DESCRIPTION
A461-03-000
A461-04-000
1Supplied with two NW25 ‘ C’ clamps, NW25 elbow, two NW25 centering rings and ‘ O’ rings, bolts,
washers, mounting bracket and studs.
2Supplied with two ISO40 ‘ C’ clamps, ISO40 elbow, two 40 mm ‘ O’ rings and centering rings, bolts,
washers, mounting brackets and studs.
EXTERNAL OIL FILTERS: EOF100A/300A
(CHEMICAL) AND EOF100M/300M (DUST)
These filters are operated by the internal pressurized oil system of the
pump, which by-passes a proportion of the oil through the filter. The filters
are easy to install - just connect the flexible hoses supplied to the oil outlet
and return connectors on the pump. The oil capacities are approximately
6 liters / 5.7 qt (EOF100) and 15 liters / 14.3 qt (EOF300).
The EOF100A and EOF300A chemical filters have a renewable high-capacity, activated earth element. The filters purify the oil by removing acidic and
other aggressive contaminants. These filters are intended for use with
hydrocarbon oils, and they will greatly increase the interval between oil
changes.
The EOF100M and EOF300M dust filters have pleated paper elements
which trap small dust particles (down to 0.5 micron diameter). Use these
filters for applications which produce large quantities of abrasive dust (for
example, vacuum furnaces).
EOF100A/EOF100M oil filter
EOF300A/EOF300M oil filter
PRODUCT DESCRIPTION
ORDERING NUMBER
Activated earth element
EOF100A
EOF300A
Dust filter element
EOF100M
EOF300M
A223-04-043
A223-04-033
A223-04-044
A223-04-042
PUMPED EXTERNAL OIL FILTERS
EOF filters have their own pump, which delivers 3.5 l min-1 /
0.89 US gal min-1 (50 Hz) clean, decontaminated oil to the pump oil system.
The canister is available in two sizes to suit the contaminant load.
The 25P and 40P elements filter dust contaminants from the oil. The 25C
and 40C elements filter both dust and chemical contaminants. Both elements have a pleated paper filter to trap dust particles; the 25C and 40C
elements have a bed of activated alumina for chemical adsorption.
Oil pump flow rate
3.5 l min-1 / 0.8 US gal min-1 (50 Hz)
Electrical supply
Current
Dimensions
Height
Width
Depth
Weight (dry)
Base units
25CR canister
40CR canister
100-120 / 200-240 V, 1-ph, 50/60 Hz
5 A (start), 2.5 A (run)
435 mm / 16.97 in
385 mm / 15.02 in
320 mm / 12.49 in
22.5kg / 50 lb
2.8 kg / 6 lb
4 kg / 9 lb
Please consult BOC Edwards or your supplier for other technical data.
½" BSP
250 (9.84)
56 (2.21)
26 (1.02)
557 (21.93)
332 (13.07)
PRODUCT DESCRIPTION
280 (11.02)
4 x Ø9 (0.35)
¼" BSP
240 (9.45)
20
(0.79)
14
(5. 3
63
)
132
(5.20)
170 (6.69)
140 (5.51)
4 x Ø11 (0.43)
160 (6.30)
2
PAGE
58
ORDERING NUMBER
Model CP100 outlet catchpot,
6.5 liter/6.2 qt capacity (12.0 kg/26.5 lb)1
Model CP300 outlet catchpot,
23.0 liter/22 qt capacity (28.0 kg/62 lb)2
½" BSP
100 (3.94)
¼" BSP
Ø175 (6.89)
PRODUCT DESCRIPTION
ORDERING NUMBER
External oil filter, without connection kit
EOF100A
EOF100M
External oil filter, with E1M/E2M175 and 275 connection kit
EOF300A
EOF300M
Connection kit for E1M/E2M40 and E1M/E2M80
EOF100A and M
EOF300A and M
ORDERING NUMBER
CR base module, PFPE prepared
A540-11-999
Supplied with hoses and 2 pairs of disconnects. When you order, specify a base module,
canister, element and a pump connection kit separately.
EOF canisters
25CR
A540-12-022
40CR
A540-14-022
Spare elements
40P
A223-04-068
25C
A223-04-090
40C
A223-04-091
Oil sampling valve
A504-09-000
Canister outlet pressure gauge
H019-00-013
Pump connection kits
E1M/E2M40
A540-00-002
E1M/E2M80
A540-00-004
A500-24-000
A500-25-000
A500-03-000
A500-23-000
A500-39-000
A364-01-020
VIBRATION ISOLATORS
EBV GAS BALLAST CONTROL VALVES
You may need to fit vibration isolators to your pump if you mount it into
a frame or system, if the mounting points are not level or if you need to
minimize the transmission of vibration and noise in your application. You
must fit flexible bellows or other flexible pipes to the pump inlet and
outlet.
E1M/E2M40 and 80
E1M/E2M175 and 275
Ø64 (2.52)
8 (0.32)
60 (2.36)
8 (0.32)
50 (1.97)
PRODUCT DESCRIPTION
64 (2.52)
83 (3.27)
88 (3.47)
114 (4.49)
A500-06-930
A500-18-930
A500-16-930
A500-17-930
2 x Ø13 (0.51)
TCV300 TEMPERATURE CONTROL
VALVE
48 (1.89)
38 (1.50)
2 x Ø8.5 (0.34)
ORDERING NUMBER
EBV20 (0.5 kg) 220-240 V s.ph 50/60 Hz
EBV100S (0.5 kg) 220-240 V s.ph 50/60 Hz
EBV300S (1.2 kg) 220-240 V s.ph 50/60 Hz
EBV300D (1.0 kg) 220-240 V s.ph 50/60 Hz
M8 x 13 (0.51)
Use the TCV300 with the E1M/E2M175 and 275 pumps. The valve
facilitates rapid pump warm-up and higher operation temperatures. This
improves the pump’s vapor pumping performance. The TCV300 also
reduces the use of cooling water and reduces operation costs.
M10 x 18 (0.71)
PUMP
APPROXIMATE
REDUCTION IN
HEIGHT WITH
PUMP FITTED (mm)
WEIGHT SET
OF FOUR
E1M40/E2M40
E1M80/E2M80
E1M175/E2M175
E1M275/E2M275
.5
2.5
3
3.5
0.6
0.6
0.9
0.9
kg/1.3 lb
kg/1.3 lb
kg/2 lb
kg/2 lb
PRODUCT DESCRIPTION
ORDERING NUMBER
A248-01-405
A248-01-405
A248-01-406
A248-01-406
TCV300 (1.2 kg/2.6 lb)
Details of vibration isolators for use with rotary/mechanical booster pump combinations are available on
request.
OPG OIL PRESSURE GAUGES
Fit the OPG to the pump to allow visual indication of the oil pressure. This
will provide early indication of a reduction in oil pressure so you can plan
preventative maintenance. The 0 - 30 psig OPG gauges are buffered against
pulses in the oil pressure, to give a steady reading. The OPG100HC is
made of brass construction.
PRODUCT DESCRIPTION
ORDERING NUMBER
OPG100HC brass oil pressure gauge
Connection kit for fitting to E2M28
A504-35-000
A504-13-000
OLM100 OIL LEVEL MONITOR
Fit the OLM100 in place of the oil sight glass on the E1M/E2M 40 and 80
pumps. The OLM100 continues to allow visual inspection of the oil level
and condition, while also providing a switched output for remote indication. Technical data: 24 V ac or dc, maximum current 0.5 A, switching
power 10 W (12 VA).
PRODUCT DESCRIPTION
OLM100 oil level monitor
ORDERING NUMBER
A504-33-000
ORDERING NUMBER
A500-01-000
2
PAGE
59
Ø52 (2.05)
Fit the EBV valve (EBV20 for RVs and E2M1.5 to E2M28, EBV100S for
E1M40 and 80, EBV300S for E1M175 and 275, EBV300D for E2M40, 80,
175 and 275) to allow remote operation of the pump’s gas ballast control.
For example, the EBV can be configured to switch off the gas ballast when
the pump is switched off, to provide suck-back protection. The EBV can
also be configured to prevent the 175 and 275 from running backwards
when the gas ballast valve is open and the pumps are stopped under vacuum.
NEW
(
)
BOC EDWARDS STOKES VACUUM
MODEL 146H
2
756 (29.75)
PAGE
60
305 (12.0)
70
(2.75)
343 (13.5)
394 (15.5)
TECHNICAL DATA
PRODUCT DESCRIPTION
50 m3h-1 / 30 ft3min-1
800 rpm
51 mm / 2 FLG
32 mm / 1 1/4 NPT
Air
143 kg / 315 lb
1.1 kW / 1 1/2 hp
2 liter / 1/2 US gal
Displacement
Rotational speed
Inlet connection
Exhaust connection
Method
Weight
Motor power
Oil capacity
25
42.5
20
34.0
1
25.5
2
10
m 3 h -1
ft 3 min -1
51.0
15
17.0
5
146H
0
8.5
0
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
10
4
torr (mm Hg)
1
Without gas ballast
2
ORDERING NUMBER
Contact BOC Edwards or your local supplier to discuss your pump and accessory
requirements with one of our sales engineers or product specialists.
With gas ballast
N EW
MODEL 148H
813 (32.0)
2
684 (26.94)
70 (2.75)
241 (9.5)
486 (19.125)
PRODUCT DESCRIPTION
ORDERING NUMBER
TECHNICAL DATA
85 m3h-1 / 50 ft3min-1
610 rpm
38 mm / 1 1/2 FLG
38 mm / 1 1/2 NPT
Air
157 kg / 345 lbs
1.5 kW / 2 hp
5 liter / 1 1/4 US gal
Displacement
Rotational speed
Inlet connection
Exhaust connection
Method
Weight
Motor power
Oil capacity
50
85
68
1
30
51
2
20
m 3 h -1
ft 3 min -1
40
34
10
148H
17
0
0
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
10
4
torr (mm Hg)
1
Without gas ballast
2
With gas ballast
279 (11.0)
329 (12.94)
PAGE
61
NEW
596.90 (23.5)
MODEL 149H
511.18 (20.13)
2
984 (38.75)
PAGE
62
184.15
387.35 (15.25)
(7.25)
298.45 (11.75)
424 (16.69)
PRODUCT DESCRIPTION
TECHNICAL DATA
ft 3 min -1
75
127.5
60
102
1
45
76.5
2
30
m 3 h -1
135 m3h-1 / 80 ft3min-1
490 rpm
51 mm / 2 FLG
38 mm / 1 1/2 NPT
13 mm / 1/2 NPT
13 mm / 1/2 NPT
Water
3.8 l min-1 / 1 US gpm
256 kg / 565 lbs
2.2 kW / 3 hp
Displacement
Rotational speed
Inlet connection
Exhaust connection
Water outlet
Water inlet
Method
Water consumption
Weight
Motor power
Oil capacity
51
15
149H
22.5
0
0
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
10
4
torr (mm Hg)
1
Without gas ballast
ORDERING NUMBER
2
With gas ballast
N EW
MODEL 149HS
596.90 (23.5)
511.18 (20.13)
2
184.15
387.35 (15.25)
(7.25)
298.45 (11.75)
424 (16.69)
PRODUCT DESCRIPTION
TECHNICAL DATA
ft 3 min -1
100
170
90
153
80
136
70
119
1
60
102
2
50
85
40
m 3 h -1
170 m3h-1 / 100 ft3min-1
615 rpm
51 mm / 2 FLG
38 mm / 1 1/2 NPT
13 mm / 1/2 NPT
13 mm / 1/2 NPT
Water
256 kg / 565 lbs
3.7 kW / 5 hp
Displacement
Rotational speed
Inlet connection
Exhaust connection
Water outlet
Water inlet
Method
Water consumption
Weight
Motor power
Oil capacity
68
30
51
20
149HS
10
0
34
17
0
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
10
4
torr (mm Hg)
1
Without gas ballast
ORDERING NUMBER
2
With gas ballast
984 (38.75)
PAGE
63
NEW
516 (20.32)
MODEL 212J
2
1111 (43.74)
PAGE
64
216
(8.50)
476 (18.74)
330 (12.99)
514 (20.24)
667 (26.26)
581 (22.87)
PRODUCT DESCRIPTION
ORDERING NUMBER
TECHNICAL DATA
ft 3 min -1
150
255
120
204
1
90
153
2
60
m 3 h -1
255 m3h-1 / 150 ft3min-1
500 rpm
76 mm / 3 FLG
52 mm / 2 FLG/2 NPT
13 mm / 1/2 NPT
13 mm / 1/2 NPT
Water
5.7 l min-1 / 1.5 US gpm
431 kg / 950 lbs
5.5 kW / 7 1/2 hp
15 liter / 4 US gal
Displacement
Rotational speed
Inlet connection
Exhaust connection
Water outlet
Water inlet
Method
Water consumption
Weight
Motor power
Oil capacity
102
30
212J
51
0
0
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
10
4
torr (mm Hg)
1
Without gas ballast
2
With gas ballast
N EW
MODEL 412J
651 (25.63)
1289 (50.75)
2
PAGE
65
527 (20.75)
702 (27.64)
578 (22.76)
1022 (40.24)
PRODUCT DESCRIPTION
TECHNICAL DATA
510 m3h-1 / 300 ft3min-1
490 rpm
103 mm / 4 FLG
76 mm / 3 FLG/3 NPT
13 mm / 1/2 NPT
13 mm / 1/2 NPT
Water
794 kg / 1750 lbs
7.5 kW / 10 hp
46 liter / 12 US gal
Displacement
Rotational speed
Inlet connection
Exhaust connection
Water outlet
Water inlet
Method
Water consumption
Weight
Motor power
Oil capacity
300
510
250
425
1
340
150
255
2
100
m 3 h -1
ft 3 min -1
200
17.0
50
412J
0
85
0
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
10
4
torr (mm Hg)
1
Without gas ballast
ORDERING NUMBER
2
With gas ballast
495 (19.49)
NEW
1438 (56.63)
MODEL 612J
2
PAGE
66
1136.65 (44.75)
1778.0 (70.0)
PRODUCT DESCRIPTION
ORDERING NUMBER
TECHNICAL DATA
1020 m3h-1 / 600 ft3min-1
490 rpm
153 mm / 6 FLG
2 x 76 mm / 3 FLG/3 NPT (x2)
13 mm / 1/2 NPT (x2)
13 mm / 1/2 NPT (x2)
Water
15.2 l min-1 / 4 US gpm
1724 kg / 3800 lbs
7.5 kW (x2) / 10 hp (x2)
Displacement
Rotational speed
Inlet connection
Exhaust connection
Water outlet
Water inlet
Method
Water consumption
Weight
Motor power
Oil capacity
600
500
825
1
680
300
510
2
200
m 3 h -1
ft 3 min -1
400
340
100
612J
170
0
0
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
10
4
torr (mm Hg)
1
Without gas ballast
2
With gas ballast
N EW
1682.75 (66.25)
MODEL 912J
2
PAGE
67
850.90 (33.5)
812.8 (32.0)
908.05 (35.75)
1282.7 (50.5)
1012.83 (39.88)
PRODUCT DESCRIPTION
ORDERING NUMBER
TECHNICAL DATA
1240 m3h-1 / 728 ft3min-1
438 rpm
153 mm / 6 FLG
127 mm / 5 NPT
25 mm / 1 NPT
25 mm / 1 NPT
Water
18.9 l min-1 / 5 US gpm
2495 kg / 5500 lbs
22 kW / 30 hp
Displacement
Rotational speed
Inlet connection
Exhaust connection
Water outlet
Water inlet
Method
Water consumption
Weight
Motor power
Oil capacity
750
1275
1020
1
2
450
765
300
m 3 h -1
ft 3 min -1
600
510
150
255
912J
0
0
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
10
4
torr (mm Hg)
1
Without gas ballast
2
With gas ballast
508.0 (20.0)
EVCA 15 SINGLE STAGE 15m 3 h -1
EVC SINGLE STAGE OIL SEALED PUMP
EVC pumps not available for sale in North America.
TECHNICAL DATA
2
PAGE
68
Oil sealed rotary vane pumps 15 to 1280 m3h-1 / 9 to 750 ft3min-1
Standard features include:
• Fine mesh inlet filter
• Vacuum non return valve
• Gas ballast valve
• Oil cooler and separator
• Flange mounted IP54 motors
• Ultimate vacuum 0.5 mbar
• Continuously rated 0.5 to 130 mbar
A new EVC range of vacuum pumps provides an economical solution for
many industrial applications requiring rough vacuum.
50 Hz
60 Hz
Ultimate pressure
Electrical supply
50 Hz, 1ph
60 Hz, 1ph
50 Hz, 3ph
60 Hz, 3ph
Motor Power
50 Hz, 1 ph
60 Hz, 1 ph
50 Hz, 3 ph
60 Hz, 3 ph
Current drawn
50Hz, 1 ph
60Hz, 1 ph
50Hz, 3 ph
60Hz, 3 ph
Rotational speed
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Weight (typical with motor)
Oil capacity
15 m3h-1 / 9 ft3min-1
18 m3h-1 / 11 ft3min-1
0.5 mbar / 3.8 x 10-1 Torr
220-240 V
230 V
230 / 400 V
200-255 / 346-440 V
0.75 kW
1.3 kW
0.55 kW
0.65 kW
6.1 A
10.9 A
2.6 / 1.5 A
#
1450 rpm
1740 rpm
56 dB(A)
58 dB(A)
37 kg / 81 lbs
0.46 l / 0.12 US gal
# - on request
Water vapor tolerance
The pumps are fitted with a fixed gas ballast valve as standard to obtain
good water vapor tolerance and to prevent any condensation in the pump.
This can be increased for high vapor loads.
10
2
10
1
1
Achieved by careful design, low noise and vibration are a feature of the
whole range.
0
10
APPLICATIONS
Food packaging
Lifting
Vacuum transporting
Conveying
Thermoforming
EVCA 15
326 (12.84)
10 -1
10 -1
10
0
10
1
10
2
10
3
mbar
10 1
10
2
10
3
10
4
10
5
Pa
1
463 (18.23)
60 Hz
2
50 Hz
132
81
(8.27)
(3.19)
10
2
10
1
1
ft 3 min -1
160
210
(6.30)
256 (10.08)
222 (8.74)
4 x Ø10.5 (0.41)
2
10
0
340 (13.39)
½" B.S.P
EVCA 15
10 -1
10 -1
Ø158
(6.22)
146
(5.75)
10
105
1
½" B.S.P
60 Hz
0
2
10
1
50 Hz
(4.13)
150
(5.91)
122
(4.80)
270 (10.63)
(5.20)
218 (8.58)
•
•
•
•
•
2
m 3 h-1
Low noise and vibration
71
(2.80)
10
2
10
3
Torr
PRODUCT DESCRIPTION
EVCA
EVCA
EVCA
EVCA
15
15
15
15
50
50
60
60
Hz
Hz
Hz
Hz
1
3
1
3
ph
ph
ph
ph
ORDERING NUMBER
230V
230/400V
220V
220V/380V
ORDERING NUMBER
Accessories see page 83.
2
PAGE
69
SPARES KIT
A695-01-956
A695-01-961
A695-01-953
A695-01-968
512 (20.16) (1 ph)
25 m3h-1 / 15 ft3min-1
30 m3h-1 / 18 ft3min-1
0.5 mbar / 0.38 Torr
(8.70)
221
150
(5.91)
255 (10.04)
50 Hz
60 Hz
Ultimate pressure
Electrical supply
50 Hz, 1 ph
60 Hz, 1 ph
50 Hz, 3 ph
50/60 Hz, 3 ph
Motor Power
50 Hz, 1 ph
60 Hz, 1 ph
50 Hz, 3 ph
60 Hz, 3 ph
Current drawn
50Hz, 1 ph
60Hz, 1 ph
50Hz, 3 ph
60Hz, 3 ph
Rotational speed
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Oil capacity
218
(8.58)
TECHNICAL DATA
4 x Ø10.5 (0.41)
10
¾" B.S.P
0
7.2 A
10.9 A
3.5 / 2.0 A
#
PRODUCT DESCRIPTION
EVCA25
EVCA25
EVCA25
EVCA25
1450 rpm
1740 rpm
57 dB(A)
59 dB(A)
133 kg / 293 lbs
1.0 l / 0.26 US gal
50Hz
50Hz
60Hz
60Hz
230V 1ph
230/400V 3ph
220V 1ph
220/400V 3ph
2
EVCA 25
10 -1
10 -1
10
10 1
10
1
10
2
10
1
60 Hz
0
2
2
10
1
10
2
10
3
mbar
10
3
10
4
10
5
Pa
10
3
50 Hz
1
2
10
0
EVCA 25
10 -1
10 -1
10
1
60 Hz
0
2
10
1
70
(2.76)
m 3 h-1
10
105
(4.13)
Ø176
(6.93)
145
(5.71)
139
(5.47)
1.0 kW
1.3 kW
0.75 kW
0.90 kW
1
1
80
(3.15)
½" B.S.P
2
10
210
(8.27)
360 (14.17)
220-240 V
230 V
230 / 400 V
200-225 / 346-460 V
# - on request
ft 3 min -1
PAGE
70
270 (10.63)
2
462 (18.19) (3 ph)
333 (13.11)
132
(5.20)
160
(6.30)
EVCA 25 SINGLE STAGE PUMP 25m 3 h -1
10
2
Torr
50 Hz
ORDERING NUMBER
A695-02-956
A695-02-961
A695-02-953
A695-02-968
573 (22.56) (1 ph)
40 m3h-1 / 24 ft3min-1
48 m3h-1 / 28 ft3min-1
150
160
270 (10.63)
235
(9.25)
TECHNICAL DATA
218
(8.58)
270 (10.63)
4 x Ø10.5 (0.41)
(5.91)
2
10
1
10
0
PRODUCT DESCRIPTION
EVCA40
EVCA40
EVCA40
EVCA40
1450 rpm
1740 rpm
61 dB(A)
63 dB(A)
50 kg / 110 lbs
2.0 l / 0.53 US gal
50Hz
50Hz
60Hz
60Hz
230V 1ph
230/400V 3ph
230V 1ph
230/400V 3ph
m 3 h-1
EVCA 40
10 -1
10 -1
10
0
10
1
10
2
10
3
mbar
10 1
10
2
10
3
10
4
10
5
Pa
10
3
Torr
10
2
10
1
10
0
2
50 Hz
1
ft 3 min -1
2
EVCA 40
10 -1
10 -1
10
1
60 Hz
0
2
10
1
89
(3.50)
9.0 A
#
4.7 / 2.7 A
#
2
60 Hz
111
1" B.S.P
(4.37)
Ø176
(6.93)
188
(7.40)
139
1.5 kW
1.8 kW
1.1 kW
1.3 kW
(5.47)
¾" B.S.P
1
1
116
(4.57)
411 (16.18)
220-240 V
230 V
230 / 400 V
200-225 / 346-440 V
# - on request
10
210
(8.27)
10
2
50 Hz
ORDERING NUMBER
A695-03-956
A695-03-961
A695-03-953
A695-03-968
2
PAGE
71
50 Hz
60 Hz
Ultimate pressure
Electrical supply
50 Hz, 1 ph
60 Hz, 1 ph
50 Hz, 3 ph
50/60 Hz, 3 ph
Motor Power
50 Hz, 1 ph
60 Hz, 1 ph
50 Hz, 3 ph
60 Hz, 3 ph
Current drawn
50Hz, 1 ph
60Hz, 1 ph
50Hz, 3 ph
60Hz, 3 ph
Rotational speed
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Oil capacity
510 (20.08) (3 ph)
380 (14.96)
137
(5.39)
(6.30)
580 (3 ph) - 614 (1 ph)
390
147
150
270
270
218
60 m3h-1 / 35 ft3min-1
72 m3h-1 / 42 ft3min-1
160
50 Hz
60 Hz
Ultimate pressure
Electrical supply
50 Hz, 1 ph
60 Hz, 1 ph
50 Hz, 3 ph
50/60 Hz, 3 ph
Motor Power
50 Hz, 1 ph
60 Hz, 1 ph
50 Hz, 3 ph
60 Hz, 3 ph
Current drawn
50Hz, 1 ph
60Hz, 1 ph
50Hz, 3 ph
60Hz, 3 ph
Rotational speed
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Oil capacity
210
4 x Ø10.5
1" B.S.P
14.7 A
6.4 / 3.7 A
#
PRODUCT DESCRIPTION
1450 rpm
1740 rpm
EVCA60
EVCA60
EVCA60
EVCA60
62 dB(A)
65 dB(A)
60 kg / 132 lbs
2.0 l / 0.53 US gal
50Hz
50Hz
60Hz
60Hz
230V 1ph
230/400V 3ph
220V 1ph
230/400V 3ph
1
2
1
10
0
10 -1
10 -1
10
0
10
1
10
10
2
10
1
10
0
10
-1
60 Hz
2
2
10
3
EVCA 60
mbar
1
50 Hz
1
2
EVCA 60
10 -1
10
1
60 Hz
0
2
10
1
111
2
10
122
139
2.2 kW
# kW
1.5 kW
1.8 kW
Ø176
188
¾" B.S.P
# - on request
10
161
481
220-240 V
230 V
230 / 400 V
200-225 / 346-440 V
m 3 h-1
PAGE
72
TECHNICAL DATA
ft 3 min -1
2
242
10
2
10
3
Torr
50 Hz
ORDERING NUMBER
A695-04-956
A695-04-961
A695-04-953
A695-04-968
EVC 100
707 (27.84)
406 (15.98)
10
3
10
2
110 m3h-1
132 m3h-1
0.1 mbar abs.
142
320 (12.60)
185
4 x M8
(7.28)
(5.55)
1½" B.S.P
184
200-255 / 346-440 V
460 V
2.2 kW
2.6 kW
281 (11.06)
1450 min
1740 min-1
404 (15.91)
141
(7.24)
113 (4.45)
(5.59)
-1
2" B.S.P
8.3 / 4.8 A
10.0 / 5.8 A
66 dB(A)
69 dB(A)
PRODUCT DESCRIPTION
EVC 100 200-255/346-440 V, 50/60 Hz, 3-ph
EVC 100 460 V, 60 Hz, 3-ph
88 kg
90 kg
4.0 l
216 (06) ZFP
32 (54) ZVF
Other voltages available on application
100 / 63 ZMS
100 / 63 ZMS
1
2
m 3 h-1
3
10
4
1
EVC100
10 0
10 -1
10 1
10
0
10
10
2
3
10
1
10
2
10
3
mbar
10
4
10
5
Pa
1
60 Hz without gas ballast
2
3
60 Hz with gas ballast
4
2
PAGE
73
ORDERING NUMBER
A694-05-905
A694-05-908
Nominal capacity
50 Hz
60 Hz
Ultimate partial pressure
Speed
50 Hz
60 Hz
Motor version
50/60 Hz
60 Hz
Motor power
50 Hz
60 Hz
Current drawn
50Hz
60Hz
Noise level
50 Hz
60 Hz
Weight
50 Hz
60 Hz
Oil capacity
Dust separator vacuum tight
Vacuum tight suction filter
Motor starter
50 Hz
60 Hz
300 11.81)
TECHNICAL DATA
262 (10.32)
300 (11.81)
EVC 150
707 (27.84) 50Hz
406 (15.98)
10
150 m3h-1
180 m3h-1
0.1 mbar abs.
142
320 (12.60)
(7.28)
404 (15.91)
141
(5.55)
1½" B.S.P
184
200-255 / 346-440 V
460 V
3.0 kW
3.6 kW
281 (11.06)
1450 min-1
1740 min-1
2" B.S.P
11.4 / 6.6 A
13.7 / 7.9 A
68 dB(A)
71 dB(A)
PRODUCT DESCRIPTION
89 kg
98 kg
4.0 l
216 (06) ZFP
40 (53) ZVF
EVC 150 200-255/346-440 V, 50/60 Hz, 3-ph
EVC 150 460 V, 60 Hz, 3-ph
160 / 100 ZMS
160 / 100 ZMS
3
1
2
10
2
10
1
300 11.81)
262 (10.32)
185
4 x M8
(5.59)
(7.24)
Nominal capacity
50 Hz
60 Hz
Speed
50 Hz
60 Hz
Motor version
50/60 Hz
60 Hz
Motor power
50 Hz
60 Hz
Current drawn
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Weight
50 Hz
60 Hz
Oil capacity
Motor starter
50 Hz
60 Hz
113 (4.45)
PAGE
74
TECHNICAL DATA
3
4
m 3 h-1
2
300 (11.81) 50Hz
315 (12.40) 60Hz
724 (28.50) 60Hz
EVC150
10 0
10 -1
10
0
10
1
10
2
10
3
mbar
10 1
10
2
10
3
10
4
10
5
Pa
1
2
3
4
ORDERING NUMBER
A694-06-905
A694-06-908
EVC 200
3
10
2
425 (16.73)
220
(8.66)
365 (14.37)
240
(9.45)
4 x M10
200-285 / 246-440 V
460 V
211
(8.31)
4.0 kW
5.5 kW
183
(7.21)
1450 min-1
1740 min-1
2" B.S.P
2" B.S.P
15.6 / 9.0 A
11.5 / 6.6 A
69 dB(A)
73 dB(A)
m 3 h-1
3
144 kg
161 kg
6.0 l
50 (03) ZRK
216 (01) ZFP
50 (53) ZVF
PRODUCT DESCRIPTION
EVC 200 200-255/346-440 V, 50/60 Hz, 3-ph
EVC 200 460 V, 60 Hz, 3-ph
160 / 100 ZMS
160 / 100 ZMS
Size on request
4
EVC200
10 1
10
0
10
1
10
2
10
3
210
(8.27)
1
10 0
10 -1
245
(9.65)
310 (12.21)
690 (27.17)
1
2
10
200 m3h-1
240 m3h-1
0.1 mbar abs.
2
PAGE
75
10
2
10
3
mbar
10
4
10
5
Pa
1
2
3
4
ORDERING NUMBER
A694-07-905
A694-07-908
Nominal capacity
50 Hz
60 Hz
Speed
50 Hz
60 Hz
Motor version
50/60 Hz
60 Hz
Motor power
50 Hz
60 Hz
Current drawn
50Hz
60Hz
Noise level
50 Hz
60 Hz
Weight
50 Hz
60 Hz
Oil capacity
Non return valve
Motor starter
50 Hz
60 Hz
Soft starter
Ø220 (8.66) 50Hz
Ø246 (9.69) 60Hz
395 (15.55)
TECHNICAL DATA
307 (12.09)
10
775 (30.51) 50hZ
880 (34.65) 60Hz
584 (22.99)
225
(8.86)
10
3
10
2
10
1
220
(8.66)
240
(9.45)
425 (16.73)
395 (15.55)
300 m3h-1
360 m3h-1
0.1 mbar abs.
307 (12.09)
4 x M10
5.5 kW
7.5 kW
Ø246
(9.69)
211
(8.31)
200-255 / 346-440 V
460 V
2" B.S.P
13.0 / 7.5 A
20.0 / 11.5 A
204 kg
209 kg
8.0 l
50 (03) ZRK
216 (51) ZFP
50 (53) ZVF
PRODUCT DESCRIPTION
EVC 300 200-255/346-440 V, 50/60 Hz 3-ph
EVC 300 460 V, 60 Hz, 3-ph
160 / 100 ZMS
200 / 160 ZMS
Size on request
EVC300
10 0
10 -1
10 1
10
0
10
1
10
2
10
3
245
(9.65)
72 dB(A)
76 dB(A)
4
3
245
(9.65)
2" B.S.P
1
2
380 (14.96)
800 (31.50)
1450 min-1
1740 min-1
183
(7.21)
Nominal capacity
50 Hz
60 Hz
Speed
50 Hz
60 Hz
Motor version
50/60 Hz
60 Hz
Motor power
50 Hz
60 Hz
Current drawn
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Weight
50 Hz
60 Hz
Oil capacity
Non return valve
Motor starter
50 Hz
60 Hz
Soft starter
m 3 h-1
PAGE
76
TECHNICAL DATA
365 (14.37)
225
(8.86)
2
950 (37.40)
632 (24.88)
EVC 300
10
2
10
3
mbar
10
4
10
5
Pa
1
2
3
4
ORDERING NUMBER
A694-08-905
A694-08-908
EVC 400
330
(12.99)
514 (20.24)
400 m3h-1
480 m3h-1
0.1 mbar abs.
2
PAGE
77
380
(14.96)
787 (30.98)
3" B.S.P
Ø312
(12.28)
310
(12.21)
400 / 690 V
400 / 690, 460 V
9.0 kW
11.0 kW
21 / 12 A
25.5 / 14.7 A
3" B.S.P
73 dB(A)
75 dB(A)
485 kg
485 kg
12.0 l
Size on request
PRODUCT DESCRIPTION
EVC 400 400/690 V, 50 Hz, 3-ph
EVC 400 400/690 V, 60 Hz 3-ph
EVC 400 460 V, 60 Hz, 3-ph
1
2
1
4
m 3 h-1
10
3
EVC400
10 0
10 -1
10 1
10
0
10
1
10
2
10
3
337
(13.27)
2
405
(15.95)
950 min-1
1140 min-1
3
10
415
(16.34)
10
2
10
3
mbar
10
4
10
5
Pa
1
2
3
4
ORDERING NUMBER
A694-09-908
A694-09-963
A694-09-964
Nominal capacity
50 Hz
60 Hz
Speed
50 Hz
60 Hz
Motor version
50 Hz
60 Hz
Motor power
50 Hz
60 Hz
Current drawn
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Weight
50 Hz
60 Hz
Oil capacity
Soft starter
606 (23.86)
TECHNICAL DATA
372
(14.65)
539 (21.22)
10
1381 (54.37)
931 (36.65)
410
(16.14)
EVC 500
10
330
(12.99)
550 m3h-1
660 m3h-1
0.1 mbar abs.
514 (20.24)
606 (23.86)
Nominal capacity
50 Hz
60 Hz
Speed
50 Hz
60 Hz
Motor version
50 Hz
60 Hz
Motor power
50 Hz
60 Hz
Current drawn
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Weight
50 Hz
60 Hz
Oil capacity
Soft starter
380
(14.96)
3" B.S.P
Ø312
(12.28)
310
(12.21)
400 / 690 V
400 / 690 V, 460 V
11.0 kW
13.0 kW
14 / 13.9 A
28 / 16.2 A
3" B.S.P
75 dB(A)
77 dB(A)
575 kg
575 kg
17.5 l
Size on request
PRODUCT DESCRIPTION
EVC 500 400/690 V, 50 Hz, 3-ph
EVC 500 400/690 V, 60 Hz, 3-ph
EVC 500 460 V, 60 Hz, 3-ph
2
10
1
3
4
EVC500
10 0
10 -1
10 1
10
0
10
1
10
2
10
3
337
(13.27)
1
2
472
(18.58)
926 (36.46)
3
10
485
(19.09)
950 min-1
1140 min-1
m 3 h-1
PAGE
78
TECHNICAL DATA
417
(16.42)
540 (21.26)
2
1517 (59.72)
986 (38.82)
410
(16.14)
10
2
10
3
mbar
10
4
10
5
Pa
1
2
3
4
ORDERING NUMBER
A694-10-908
A694-10-963
A694-10-964
EVC 700
425
(16.73)
609 (23.98)
700 m3h-1
840 m3h-1
0.1 mbar abs.
2
PAGE
79
500
(19.69)
926 (36.46)
3" B.S.P
Ø360
(14.17)
310
(12.21)
400 / 690 V
400 / 690, 460 V
15.0 kW
18.0 kW
30 / 17.5 A
33 / 19.0 A
3" B.S.P
78 dB(A)
80 dB(A)
605 kg
605 kg
17.5 l
Size on request
PRODUCT DESCRIPTION
EVC 700 400/690 V, 50 Hz, 3-ph
EVC 700 400/690 V, 60 Hz, 3-ph
EVC 700 460 V, 60 Hz, 3-ph
2
1
4
m 3 h-1
10
3
EVC700
10 0
10 -1
10 1
10
0
10
1
10
2
10
3
337
(13.27)
1
2
472
(18.58)
950 min-1
1140 min-1
3
10
506
(19.92)
10
2
10
3
mbar
10
4
10
5
Pa
1
2
3
4
ORDERING NUMBER
A694-11-908
A694-11-963
A694-11-964
Nominal capacity
50 Hz
60 Hz
Speed
50 Hz
60 Hz
Motor version
50 Hz
60 Hz
Motor power
50 Hz
60 Hz
Current drawn
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Weight
50 Hz
60 Hz
Oil capacity
Soft starter
765 (30.12)
TECHNICAL DATA
417
(16.42)
635 (25.0)
10
1584 (62.36)
986 (38.82)
410
(16.14)
EVC 900
10
425
(16.73)
830 m3h-1
995 m3h-1
0.1 mbar abs.
699 (27.52)
805 (31.69)
Nominal capacity
50 Hz
60 Hz
Speed
50 Hz
60 Hz
Motor version
50 Hz
60 Hz
Motor power
50 Hz
60 Hz
Current drawn
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Weight
50 Hz
60 Hz
Oil capacity
Soft starter
500
(19.69)
3" B.S.P
Ø360
(14.17)
375
(14.76)
400 / 690 V
400 / 690 V, 460 V
18.5 kW
22.0 kW
43 / 24.8 A
45 / 26.0 A
4" B.S.P
79 dB(A)
81 dB(A)
710 kg
710 kg
20 l
Size on request
PRODUCT DESCRIPTION
EVC 900 400/690 V, 50 Hz, 3-ph
EVC 900 400/690 V, 60 Hz, 3-ph
EVC 900 460 V, 60 Hz, 3-ph
2
10
1
4
3
EVC900
10 0
10 -1
10 1
10
0
10
1
10
2
10
3
458
(18.03)
1
2
523
(20.59)
916 (36.06)
3
10
425
(16.73)
950 min-1
1140 min-1
m 3 h-1
PAGE
80
TECHNICAL DATA
420
(16.54)
685 (26.97)
2
1604 (63.15)
1083 (42.64)
480
(18.90)
10
2
10
3
mbar
10
4
10
5
Pa
1
2
3
4
ORDERING NUMBER
A694-12-908
A694-12-963
A694-12-964
EVC 1100
3" B.S.P
Ø360
(14.17)
375
(14.76)
400 / 690 V
400 / 690, 460 V
22.0 kW
26.0 kW
45 / 26 A
51 / 30 A
4" B.S.P
81 dB(A)
83 dB(A)
1
960 kg
960 kg
26 l
Size on request
PRODUCT DESCRIPTION
EVC 1100 400/690 V, 50 Hz, 3-ph
EVC 1100 400/690 V, 60 Hz, 3-ph
EVC 1100 460 V, 60 Hz, 3-ph
4
EVC1100
10 0
10 -1
10 1
10
0
10
1
10
2
10
3
472
(18.58)
m 3 h-1
10
602
(23.70)
1074 (42.28)
3
2
505
(19.88)
950 min-1
1140 min-1
1
2
425
(16.73)
500
(19.69)
3
10
699 (27.52)
1100 m3h-1
1320 m3h-1
0.1 mbar abs.
2
PAGE
81
10
2
10
3
mbar
10
4
10
5
Pa
1
2
3
4
ORDERING NUMBER
A694-13-908
A694-13-963
A694-13-964
Nominal capacity
50 Hz
60 Hz
Speed
50 Hz
60 Hz
Motor version
50 Hz
60 Hz
Motor power
50 Hz
60 Hz
Current drawn
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Weight
50 Hz
60 Hz
Oil capacity
Soft starter
805 (31.69)
TECHNICAL DATA
441
(17.36)
685 (26.97)
10
1763 (69.41)
1122 (44.17)
480
(18.90)
EVC 1300
10
500
(16.69)
10
2
10
1
3" B.S.P
Ø622
(24.49)
375
(14.76)
400 / 690 V
400 / 690 V, 460 V
30 kW
36 kW
60 / 35 A
64 / 37 A
4" B.S.P
82 dB(A)
84 dB(A)
1050 kg
1050 kg
26 l
Size on request
PRODUCT DESCRIPTION
EVC 1300 400/690 V, 50 Hz, 3-ph
EVC 1300 400/690 V, 60 Hz, 3-ph
EVC 1300 460 V, 60 Hz, 3-ph
4
10 1
10
0
10
1
10
2
10
3
472
(18.58)
EVC1300
10 0
10 -1
602
(23.70)
1074 (42.28)
1
3
505
(19.88)
950 min-1
1140 min-1
3
2
425
(16.73)
1280 m3h-1
1535 m3h-1
0.1 mbar abs.
(699 (27.52)
805 (31.69)
Nominal capacity
50 Hz
60 Hz
Speed
50 Hz
60 Hz
Motor version
50 Hz
60 Hz
Motor power
50 Hz
60 Hz
Current drawn
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Weight
50 Hz
60 Hz
Oil capacity
Soft starter
m 3 h-1
PAGE
82
TECHNICAL DATA
441
(17.36)
685 (26.97)
2
1900 (74.80)
1122 (44.17)
480
(18.90)
10
2
10
3
mbar
10
4
10
5
Pa
1
2
3
4
ORDERING NUMBER
A694-14-908
A694-14-963
A694-14-964
D
A
ACCESSORIES FOR ROUGH PUMPS
B
3
2
2
PAGE
83
C
1
F
G
H
ZFP
1
Dust separator
2
Suction filter horizontal
3
Suction filter vertical
145
145
216
216
216
216
ZFP IN LINE DUST SEPARATOR
Vacuum tight dust separator complete with paper filter, cartridge and special lid, allowing installation of filter in the vacuum line. Filter cartridges
have a separation efficiency 99.9%, for a particle size of more then 5
micron
(11)
(06)
(06)
(01)
(51)
(52)
A
B
C
D
E
F
G
H
28
28
50
50
65
65
221
221
334
334
361
361
25
25
25
25
25
25
72
72
114
114
114
114
129
129
194
194
194
194
134
134
220
220
230
230
£/4” BSP
1” BSP
1!/2” BSP
2” BSP
2!/2” BSP
3” BSP
£/4” BSP
1” BSP
1!/2” BSP
2” BSP
2!/2” BSP
3” BSP
EVC pump accessories are not available for sale in North America.
PRODUCT DESCRIPTION
FOR PUMP
ZFP145(11)
ZFP145(06)
ZFP216(06)
ZFP216(01)
ZFP216(51)
ZFP216(52)
EVCA 15, 25
EVCA 40, 60
EVC 100, 150
EVC 200
EVC 300
EVC 400
SPARES
Spares filter elements
ZFP145(11)
ZFP145(06)
ZFP216(06)
ZFP216(01)
ZFP216(51)
ZFP216(52)
ORDERING NUMBER
A695-01-003
A695-03-003
A695-05-003
A696-02-003
A696-03-003
A697-01-003
ORDERING NUMBER
A695-01-702
A695-01-702
A695-01-703
A695-01-703
A695-01-703
A695-01-703
ØE
ZMS DOL STARTER
ZAD SOFT STARTER
A direct on line motor starter fitted with thermal overload to protect the
motor.
2
Soft starter unit for automatic start-up of motor. The soft starting and run
out of the machine are adjustable. Peak loads are avoided in comparison
to star/delta connection. The mechanical stress to machine parts is
reduced by soft starting.
PAGE
84
B
C
A
ZMS
MOTOR STARTER
A
X
Y
Z
Amperage range
Starter casing
Lockable start bottom
Overload switch
ZMS
63
100
160
200
250
#
212728
212729
212730
212731
212732
ZAD
A
B
C
5.5
7.5
11
15
18.5
22
30
37
375
375
375
375
375
375
375
375
250
250
250
250
250
375
375
375
175
175
175
175
175
225
225
225
A
X
Y
Z
ZAD
4.0 - 6.3
6.3 - 10
10 - 16
16 - 20
20 - 25
820930
820930
820930
820930
820930
#
#
#
#
#
820818
820819
820927
820928
820929
(01)
(02)
kW
A
X1
X2
X3
X4
On request
On all direct on line starters a short time delay has been built in, before the starter reacts to a possible
overload situation. This feature has been designed so that the unit will tolerate a short overload, therefore
when a unit is cold started, the starter will not overload immediately.
PRODUCT DESCRIPTION
FOR PUMP
ZMS63
ZMS100
ZMS160
ZMS200
ZMS250
EVC
EVC
EVC
EVC
EVC
100
150
200
300
400
ORDERING NUMBER
A694-05-004
A694-06-004
A694-07-004
A694-08-004
A694-09-004
#
SOFT STARTER
Standard version with main switch and On/Off key
Motor rating
Current drawn
Fixing for motor
Fixing for motor
Fixing for motor
Fixing for motor
flange
flange
flange
flange
300
350
400
450
mm
mm
mm
mm
kW (400 V)
ZAD
(01)
(02)
5.5
7.5
11
15
18.5
22
30
37
209759-0016
209759-0010
209759-0011
209759-0012
209759-0013
209759-0014
209759-0015
#
209759-0026
209759-0020
209759-0021
209759-0022
209759-0023
209759-0024
209759-0025
#
On request
A
(max.)
10
10
16
24
32
40
40
63
-
16
16
25
32
40
63
63
80
ZAD
ZVF SUCTION FILTER
X2
(01)
(02)
(01)
(02)
5.5
7.5
11
15
18.5
22
30
37
209759-0136
209759-0130
#
#
#
-
209759-0146
209759-0140
#
#
#
-
#
209759-0150
209759-0151
209759-0152
209759-0153
#
-
#
209759-0160
209759-0161
209759-0162
209759-0163
#
-
A vacuum tight suction filter complete with paper filter element fitted in a
steel housing for installation at the suction side of pump. Filter cartridges
have a separation efficiency of 99.9% for a particle size of more than 5
micron.
On request
X3
X4
(01)
(02)
(01)
(02)
5.5
7.5
11
15
18.5
22
30
37
#
#
#
209759-0173
209759-0214
#
#
#
#
#
209759-0183
209759-0224
#
#
209759-0235
#
209759-0245
#
C
ZAD
kW (400 V)
ØA
#
On request
B
Suitable for all machines in the range. Fitting kit is available as an option on request.
F
D
L
EVC
EVC
EVC
EVC
EVC
EVC
EVC
EVC
EVC
EVC
EVC
EVC
EVC
ZAD 15
ZAD 18.5
ZAD 22
ZAD 30
ZAD 37
200 50/60 HZ
300 50/60 Hz
400 50/60 Hz,
500 50 Hz
500 60 Hz,
700 50 Hz
700 60 Hz,
900 50 Hz
900 60 Hz,
1100 50 Hz
1100 60 Hz,
1300 50 Hz
1300 60 Hz,
A694-07-005
A694-08-005
A694-09-005
J
E
ZAD 5.5
ZAD 7.5
ZAD 11
ORDERING NUMBER
G
FOR PUMP
H
PRODUCT DESCRIPTION
A694-10-005
K
K
A694-11-005
A694-12-005
A694-13-005
A694-14-005
BACK PRESSURE GAUGE
Back pressure gauge to provide a visual indication of when oil mist filters
require changing in EVCA and EVC pumps.
ØA
ZVF20 (52)
ZVF20 (53)
ZVF20 (54)
ZVF32 (52)
ZVF32 (54)
ZVF40 (53)
ZVF50 (53)
ZVF100 (51)
B
C
D
E
F
97 59 70 88.5 78 45
97 59 70 88.5 65 45
97 59 70 88.5 77 45
136 81 75 116 95 68
136 81 75 116 93 68
176 100 140 200 93 111
200 114 212 258 136 130
272 197 165 263 - 147
G
H
J
K
L
15
16
19
17
20
19
24
30
93
83
100
116
124
112
170
133
13
15
17
17
19
19
24
30
!/2
£/4
1
1
1!/2
1!/2
2
4
37
43
52
52
65
65
74
98
PRODUCT DESCRIPTION
ORDERING NUMBER
Back pressure gauge
A694-05-006
2
PAGE
85
#
X1
kW (400 V)
SPARES
PRODUCT DESCRIPTION
2
PAGE
86
ZVF20(52)
ZVF20(53)
ZVF20(54)
ZVF32(52)
ZVF32(54)
ZVF40(53)
ZVF100 (51)
FOR PUMP
EVCA 15
EVCA 25
EVCA 40
EVCA 60
EVC 100
EVC 150
EVC 400, 500,
700
SPARES
Spares filter elements
ZVF20(52)
ZVF20(53)
ZVF20(54)
ZVF32(52)
ZVF32(54)
ZVF40(53)
ZVF50(53)
ZVF100(51)
ORDERING NUMBER
A695-01-002
A695-02-002
A695-03-002
A695-04-002
A695-05-002
A694-06-002
A694-09-002
1
2
Two kits are available for the EVC range of pumps.
• Seals kit - contains replacement seals required during stripdown.
• Overhaul kit - contains filter, blades, etc.
ORDERING NUMBER
A695-01-700
A695-01-700
A695-01-700
A695-01-701
A695-01-701
A694-06-700
A696-01-704
A696-09-700
PRODUCT DESCRIPTION
Spares kit
EVCA 15
EVCA 25
EVCA 40
EVCA 60
EVC 100
EVC 150
EVC 200
EVC 300
EVC 400
EVC 500, EVC700
EVC 900
EVC 1100
EVC 1300
ORDERING NUMBER
ORDERING NUMBER
Seals kit
A695-01-800
A695-02-800
A695-03-800
A695-04-800
On application
On application
102566 0101
102567 0101
102568 0101
102570 0101
On application
On application
On application
Overhaul kit
A695-01-801
A695-02-801
A695-03-801
A695-04-801
On application
On application
102566 0103
102567 0103
102568 0103
102570 0103
On application
On application
On application
GV/GVM DRYSTAR ® PUMPS
(to expel the compressed gas). The claw mechanism offers the following
features:
• Dry operation, non contact mechanism
• Self valving - the pump can deliver to atmospheric pressure
• Short gas path - better particulate handling
• Staged compression - efficient power use
• High process temperature - excellent water vapor handling
New roots claw technology
6 year major service intervals The GV range of pumps are designed
to be ‘fit and forget’, with the ‘M’ products having oil-lubricated bearings
that extend major service intervals to 6 years. The high vacuum oil lubricated bearings are based on the well-proven technology found in EH
boosters, using high performance seals. With re-greasing eliminated on the
‘M’ products and bearing replacement confined to 6-year intervals, the
need for pump intervention is significantly reduced. As a result, pump productivity is increased.
Our GV Drystar® pumps are a new series of dry vacuum pumps designed
to perform reliably and economically in a range of demanding industrial
applications. The GV pumps have displacements from 90 m3h-1 to
560 m3h-1 / 50 ft3min-1 to 330 ft3min-1.
Benefits of switching to BOC Edwards GV series dry pumps
• Repeatable pumping performance
No degradation in speed or pressure - no oil contamination
• Fit and forget performance
No user intervention for 1 year
• Good dust handling using existing filters
Claw mechanism is self cleaning and will pass micron size particulate
• Noise and Vibration reduced
• Oil free exhaust fumes
• No oil reclaim. Clean environment around exhaust area
• Increased up time
• Maintenance cost savings
No oil associated issues or frequent rebuilds
• Continuous atmospheric pumping with no detrimental effects to the
pump
• Highly reliable dry mechanism, proven in 60,000 installations
GV technology
A
B
Dry running
seal
Oil seal
Hardened
seal sleeve
Oil
thrower
Bearing
Oil thrower
and labyrinth
Oil drain and
pressure vent
to oil box
Reduced utility costs Despite the increase in speed, the GV range
have been designed with energy efficiency in mind. In the operating region
below 10 mbar the power consumed significantly reduces so that its pumping efficiency in terms of m3/hr/kw is better than alternative technologies.
This means that it can offer significant savings in power consumption costs
alone, as much as £2500 / $3500 per pump per annum depending on the
process cycle.
On some clean applications, an optional atmospheric shaft seal purge can
eliminate the need for nitrogen and reduce cost of ownership still further.
90
50
C
m3 / h / kW
D
45
70
40
60
35
30
50
GV600M
25
40
20
GV410M
30
cfm / kW
GV
80
15
20
A
Inlet exposed
C
Outlet exposed
10
B
Inlet isolated
D
Outlet isolated
0
The design of the BOC Edwards GV dry pumps is based on the wellproven claw technology for dry pumps. Two pairs of claw shaped rotors
on two shafts rotate in opposite directions to trap and compress the process gas which flows along the axis of the shafts between the claw pairs.
During each complete rotation of the claws, first the inlet port of each claw
pair is exposed (to admit gas to the pump), then both the inlet and outlet
are isolated (to trap and compress the gas), and then the outlet is exposed
10
5
0
10 -2
10 -1
10 0
10 1
10 2
10 3 mbar
10 0
10 1
10 2
10 3
10 2
10 5
Pa
The Drystar® GV260-600M range is based on the well proven BOC
Edwards patented claw mechanism but has an additional roots stage,
enhancing pumping speed in the working range and reaching a peak speed
of up to 560 m3h-1 / 330 ft3min-1
BOC Edwards have pioneered the use of dry vacuum pumps in some of
the most harsh applications, with over 10 years experience and more than
60,000 Drystar® pumps installed worldwide.
2
PAGE
87
GV and GVM Drystar® pumps offer excellent vacuum performance and
reliability in the harshest of industrial processes, with low running costs.
The pumps may be used simply on their own (with minimum installation
and services) or in conjunction with a range of accessories to allow them
to be tailored to your exact requirements.
2
PAGE
88
GV TCV (temperature control valve) Use a TCV in conjunction
with indirect cooling or air blast cooling, to control the pump temperature.
This optimizes the pumping of vapors by preventing condensation within
the pump.
For ordering information see page 96.
GV Pumping Systems
The GV range is available with a variety of standard and bespoke systemization accessories. The more commonly requested items are explained
below and a full listing is available on page 96.
Indirect cooling kit with temperature control valve
GV Acoustic Enclosures, Exhaust Silencer and Motor Mufflers
GV pumps produce a steady noise level of 75 to 81 dB(A). This can be
reduced (by about 5dB(A)) by the use of acoustic enclosures, exhaust
silencers and motor mufflers. Acoustic enclosures to enclose a GV dry
pump or a GV dry pump and EH mechanical booster combination are available. The exhaust silencer reduces pulsations in the exhaust pressure (and
so minimizes pump-induced resonance in your exhaust extraction system).
The exhaust silencer also traps dust and condensates from the pump,
which can then be easily and conveniently processed at atmospheric pressure.
GV EH booster connection kit This kit is used to fit a BOC Edwards
EH mechanical booster pump to the GV pump, to increase the pumping
speed of the system up to 3000 m3h-1 / 1770 ft3min-1. The connection kit
is designed so that the compact footprint of the GV dry pump is maintained. The combination of BOC Edwards GV dry pump and a BOC
Edwards EH booster pump gives optimum oil free vacuum performance.
In addition to the single piece silencer, for heavier dust loads we offer a
breakable, flanged unit to allow easy cleaning.
GV Gas and Water Control Panel A gas and water control panel
can be added to the GV dry pump to monitor and control the gas and cooling water supplies to the pump. The panel allows full integration with
supervisory control systems.
Four variations of gas control are available:
• Shaft seal purge
• Gas ballast purge
• Exhaust purge
• Atmospheric purge
GV Water Kit The water kit (suitable for use with direct or indirect
water cooling) contains components used to control and monitor the
cooling water supply to the GV pumps. Three kits are available:
• GV Direct/Indirect Kit, for use with a GV pump only.
• GV /EH Booster Direct/Indirect Kit, for use with a GV and EH booster
pump combination.
• Booster Retrofit Kit, for existing GV installations which require the
addition of an EH booster pump.
GV Indirect Cooling Kit This kit contains a heat exchanger and connection hoses. Use indirect cooling with dirty cooling water supply (as the
external cooling water flows only through the heat exchanger and not
through the pump) and when control of the pump temperature is required.
Inlet Dust Filters Many industrial processes produce large quantities
of dust: we recommend that you install inlet dust filters to remove the
most of the dust before it enters the pump and exhaust system. For information about inlet dust filters, see page 99. We recommend ITM filters for
applications which generate wet dust and for backing diffusion pumps, and
ITF filters for dry dust applications.
GV400 or GV250 pump with exhaust silencer
GV Modular Frame Base Fit a frame base when you fit acoustic
enclosures and to provide stability for large EH booster combinations systems.
Motor control modules Used for GV pumps and for EH booster combination systems, these modules provide motor overload protection, automate start-up and shut-down, and integrate with supervisory control
systems. There are two models available;
• top level module - a PLC based unit with interface to external tool
controls
• base level module - a unit with no interface to external tool controls.
For particularly dusty applications or dusty applications with high process
cycle rates we now offer a tunable inlet filter/silencer and high flow (700
mbar) air purge.
GV80 INDUSTRIAL DRY PUMP
350
GV80, 60Hz
300
ft 3 min -1
250
200
2
150
PAGE
89
100
0
10 -2
10 -1
10 0
10 1
10 2
10 3 Torr
813 (32.01)
87
(3.42)
301 (11.85)
275 (10.83)
TECHNICAL DATA
50 Hz
91.5 m3h-1 / 54 ft3min-1
60 Hz
109.8 m3h-1 / 65 ft3min-1
Pumping speed1
50 Hz
80 m3h-1 / 47 ft3min-1
60 Hz
96 m3h-1 / 57 ft3min-1
Ultimate pressure
<0.1 mbar / <0.08 Torr
Power consumption at 10 mbar / 7.5 Torr
50 Hz
3 kW / 4 hp
60 Hz
3.7 kW / 5 hp
Motor Rating
50 Hz
4 kW / 5.4 hp
60 Hz
6 kW / 8 hp
Cooling-water flow at 20 ºC
1 l min-1 / 0.26 US gal min-1
Seal purge (dry air)
<25 l min-1, 0.4 bar
<6.5 US gal min-1, 0.3 Torr
Noise level
50 Hz
78 dB(A)
60 Hz
81 dB(A)
Inlet connection
ISO40
Outlet connection
NW40
Weight
145 kg / 319 lb
Gear box oil capacity
0.4 liter / 0.1 US gal min-1
Electrical supply
50 Hz, 3 ph
200 - 240 V/380 V/400 V/415 V
60 Hz, 3 ph
230 V/460 V
737 (29.02)
173 (6.81)
ISO40
143 (5.63)
NW40
4 x Ø9 (0.35)
80
80
(3.15) (3.15)
182 (7.16)
270 (10.63)
Contact BOC Edwards or your local supplier to discuss your requirements with one of
our sales engineers or product specialists.
1Measured in accordance with Pneurop 6602 at 40 ºC
10
3
10
2
3
m h
-1
1
2
10
1
10
0
GV80
10
-2
10
0
1
10
-1
10
1
60 Hz
2
10
0
10
2
10
1
10
3
10
2
10
3
mbar
10
4
10
5
Pa
50 Hz
50
350
GV160, 50/60Hz
300
250
ft 3 min -1
2
PAGE
90
200
150
100
50
0
10 -2
10 -1
10 0
10 1
10 2
10 3 Torr
1213 (47.76)
628 (24.72)
337 (13.27)
TECHNICAL DATA
Noise level (50 and 60 Hz)
Inlet connection
Outlet connection
Weight
Electrical supply
50 Hz, 3 ph
60 Hz, 3 ph
50 Hz, 3 ph (Jpn)
60 Hz, 3 ph (Jpn)
457 (17.99)
200 m3h-1 / 118 ft3min-1
180 m3h-1 / 106 ft3min-1
<0.1 mbar / <0.08 Torr
4.2 kW / 5.7 hp
4.2 kW / 5.6 hp
7.5 kW / 10 hp
8.5 kW / 11.4 hp
1 l min-1 / >0.45 US gal min-1
<30 l min-1, 0.4 bar
7.8 US gal min-1, 0.3 Torr
<78 dB(A)
ISO63
NW40
230 kg, 506 lb
1.2 liter / 0.31 US gal min-1
119 (4.68)
Displacement 50/60 Hz
Pumping speed 50/60 Hz1
Ultimate pressure
Power consumption at 10 mbar / 7.5 Torr
50 Hz
60 Hz
Motor Rating
50 Hz
60 Hz
Cooling-water flow at 20 ºC
297 (11.69)
ISO63
NW40
379 (14.92)
220 - 240 V/ 380 - 415 V
208 - 230 V/ 460 V
200 V
200 - 208 V/ 380 V
1Measured in accordance with Pneurop 6602 at 40 ºC
10
3
1
2
10
1
10
0
3
m h
-1
10
GV160
10
-2
10
0
1
10
-1
10
1
10
0
10
2
10
1
10
3
10
2
10
3
mbar
10
4
10
5
Pa
50/60 Hz
10
3
10
2
10
1
10
0
ft min
-1
3
2
PAGE
91
GV250, 60Hz
-2
10
-1
10
0
10
1
10
2
10
3
Torr
1432 (56.38)
TECHNICAL DATA
Displacement
50 Hz
341 m3h-1 / 200 ft3min-1
60 Hz
409 m3h-1 / 240 ft3min-1
Pumping speed*
50 Hz
250 m3h-1 / 147 ft3min-1
60 Hz
315 m3h-1 / 186 ft3min-1
Ultimate pressure
<0.4 mbar / <0.3 Torr
Power consumption at 10 mbar (7.5 Torr)
50 Hz
6 kW / 8 hp
60 Hz
7.4 kW / 9.9 hp
Motor Rating
50 Hz
11 kW / 14.8 hp
60 Hz
15 kW / 20.1 hp
Cooling-water flow at 20 °C
<4 l min-1 / <1.1 US gal min-1
<22 l min-1, 0.4 bar
0.6 ft3 min-1, 6 psi
Noise level
50 Hz
79 dB(A)
60 Hz
82 dB(A)
Inlet connection
ISO100
Outlet connection
ISO63
Weight
750 kg / 1650 lb
1.4 liter, 0.37 gal (minimum)
1.6 liter, 0.42 gal (maximum)
Electrical supply
50 Hz, 3 ph
380 V /400 V/415 V
60 Hz, 3 ph
230 V/460 V
3
10
2
10
1
10
0
377 (14.84)
255
(10.04)
460 (18.11)
3
m h
-1
1
2
GV250
10
-2
10
0
1
10
-1
10
1
60 Hz
2
10
0
10
2
10
1
10
3
581 (22.87)
1000 (39.37)
1Measured in accordance with Pneurop 6602 at 40 °C
10
148
(5.83)
315 (12.4)
366 (14.41)
10
2
10
3
mbar
10
4
10
5
Pa
50 Hz
10
10
3
10
2
10
1
10
0
ft min
-1
3
2
PAGE
92
GV400, 60Hz
10
-2
10
-1
10
0
10
1
10
2
10
3
Torr
1480 (58.27) (50Hz) / 1470(57.87) (60Hz)
TECHNICAL DATA
Displacement
50 Hz
60 Hz
Pumping speed1
50 Hz
60 Hz
Ultimate pressure
Power consumption at 10 mbar
50 Hz
60 Hz
Motor Rating
50 Hz
60 Hz
Cooling-water flow at 20 °C
540 m3h-1 / 318 ft3min-1
592 m3h-1 / 348 ft3min-1
377 (14.84)
255
(10.04)
7 kW / 9.4 hp
8.2 kW / 11 hp
18 kW / 24.1 hp
22.5 W / 30.2 hp
<4 l min-1 / <1.1 US gal min-1
<22 l min-1, 0.4 bar
0.6 ft3 min-1, 0.3 Torr
460 (18.11)
82 dB(A)
82 dB(A)
ISO100
ISO63
820 kg / 1804 lb
1.4 liter / 0.37 gal (minimum)
1.6 liter / 0.42 gal (maximum)
Electrical supply
50 Hz, 3 ph
60 Hz, 3 ph
380 V/400 V/415 V
230 V/460 V
1Measured in accordance with Pneurop 6602 at 40 °C
3
1
2
-1
10
3
m h
2
10
1
10
0
GV400
10
-2
10
0
1
10
-1
10
1
60 Hz
2
581 (22.87)
1000 (39.37)
380 m3h-1 / 225 ft3min-1
425 m3h-1 / 252 ft3min-1
<0.4 mbar / <0.3 Torr
Noise level
50 Hz
60 Hz
Inlet connection
Outlet connection
Weight
10
148
(5.83)
315 (12.40)
414 (16.30)
10
0
10
2
10
1
10
3
10
2
10
3
mbar
10
4
10
5
Pa
50 Hz
GV260M INDUSTRIAL DRY PUMP
600
GV260M, 50Hz
500
m3 h-1
400
300
2
200
PAGE
93
0
10 -2
10 -1
10 0
10 1
10 2
10 3 mbar
10 0
10 1
10 2
10 3
10 4
10 5 Pa
350
GV260M, 60Hz
300
250
336 m3h-1 / 198 ft3min-1
404 m3h-1 / 238 ft3min-1
3h-1
ft3min-1
/ 141
240 m
320 m3h-1 / 189 ft3min-1
170 m3h-1 / 100 ft3min-1
220 m3h-1 / 130 ft3min-1
200
150
100
50
0
10 -2
10 -1
10 0
10 1
10 2
10 3 Torr
1464 (57.64) (50Hz)
1607 (63.27) (60Hz)
<0.6 mbar / <0.45 Torr
<0.4 mbar / <0.03 Torr
112
461 (18.15)
(4.41)
6 kW / 8 hp
6.5 kW / 8.65 hp
581 (22.87)
11 kW / 14.6 hp
15 kW / 20 hp
5 l min / 1.3 US gal min-1
<22 l min / 0.6 ft3 min-1
78 dB(A)
80 dB(A)
ISO100
ISO63
1000 (39.37)
4 x Ø22 (0.87)
377 (14.84)
84.7
(3.34)
255
(10.04)
201
(7.91)
725 kg / 1595 lb
750 kg / 1650 lb
1.6 liter / 0.42 US gal
1
380 V / 415 V
230 V / 460 V
291.98
(11.50)
315 (12.40)
Displacement
50 Hz
60 Hz
Pumping speed @ 1 mbar
50 Hz
60 Hz
Pumping speed at atmosphere
50 Hz
60 Hz
Ultimate pressure
50 Hz
60 Hz
50 Hz
60 Hz
Motor Rating
50 Hz
60 Hz
Cooling-water (maximum flow rate)
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Inlet connection
Outlet connection
Weight
50 Hz
60 Hz
Gear box oil capacity)
Electrical supply
50 Hz
60 Hz
ft 3 min -1
TECHNICAL DATA
460 (18.11)
1
Alternative inlet
100
600
GV410M, 50Hz
500
400
m3 h-1
2
PAGE
94
300
200
100
0
10 -2
10 -1
10 0
10 1
10 2
10 3 mbar
10 0
10 1
10 2
10 3
10 4
10 5 Pa
350
GV410M, 60Hz
300
250
380 m3h-1 / 224 ft3min-1
460 m3h-1 / 271 ft3min-1
3 -1
3
-1
150
100
50
0
10 -2
10 -1
300 m h / 177 ft min
360 m3h-1 / 212 ft3min-1
10 0
10 1
10 2
10 3 Torr
1547 (60.91) (50Hz)
1663 (65.47) (60Hz)
112
544 (21.42)
<0.065 mbar / 0.048 Torr
<0.04 mbar / 0.03 Torr
(4.41)
7 kW / 9.3 hp
8 kW / 10 hp
581 (22.87)
15 kW / 20 hp
18.75 kW / 25 hp
5.6 l min / 1.46 US gal min-1
<22 l min / 0.6 ft3 min-1
1180 (46.46)
4 x Ø22 (0.87)
78 dB(A)
78 dB(A)
ISO100
ISO63
377 (14.84)
84.7
(3.34)
255
(10.04)
201
(7.91)
780 kg, 1716 lb
810 kg, 1782 lb
1
380 V/415 V
230 V/460 V
315 (12.40)
Electrical supply
50 Hz
60 Hz
526 m3h-1 / 310 ft3min-1
635 m3h-1 / 374 ft3min-1
200
291.98
(11.50)
Displacement
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
Ultimate pressure
50 Hz
60 Hz
50 Hz
60 Hz
Motor Rating
50 Hz
60 Hz
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Inlet connection
Outlet connection
Weight
50 Hz
60 Hz
ft 3 min -1
TECHNICAL DATA
460 (18.11)
1
Alternative inlet
600
GV600M, 50Hz
500
m3 h-1
400
2
300
PAGE
95
200
100
10 -1
10 0
10 1
10 2
10 3 mbar
10 0
10 1
10 2
10 3
10 4
10 5 Pa
350
GV600M, 60Hz
300
250
793 m3h-1 / 467 ft3min-1
727 m3h-1 / 428 ft3min-1
560 m3h-1 / 330 ft3min-1
540 m3h-1 / 318 ft3min-1
3 -1
3
-1
200
150
100
50
0
10 -2
10 -1
400 m h / 236 ft min
420 m3h-1 / 247 ft3min-1
10 0
10 1
10 2
10 3 Torr
1664 (65.51) (50Hz)
1714 (67.48) (60Hz)
<0.06 mbar / <0.045 Torr
<0.05 mbar / <0.0375 Torr
634 (24.96) (50Hz)
112
594 (23.39) (60Hz)
(4.41)
581 (22.87)
7 kW / 9 hp
9 kW / 12 hp
22.5 kW / 30 hp continuous rating
22.5kW / 30 hp continuous rating
<22 l min / 0.6 ft3 min-1
1180 (46.46)
4 x Ø22 (0.87)
377 (14.84)
78 dB(A)
80 dB(A)
ISO100
ISO63
84.7
(3.34)
255
(10.04)
201
(7.91)
950 kg, 2090 lb
980 kg, 2156 lb
1
380 V/415 V
230 V/460 V
291.98
(11.50)
315 (12.40)
Displacement
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
Ultimate pressure
50 Hz
60 Hz
50 Hz
60 Hz
Motor Rating
50 Hz
60 Hz
50 Hz
60 Hz
Noise level
50 Hz
60 Hz
Inlet connection
Outlet connection
Weight
50 Hz
60 Hz
Electrical supply
50 Hz
60 Hz
ft 3 min -1
TECHNICAL DATA
460 (18.11)
1
Alternative inlet
0
10 -2
GV DRY PUMP PACKAGED SOLUTIONS
2
PAGE
96
BOC Edwards have the capability to provide packaged solutions based on
a modular range of accessories to give optimal pumping packages to suit
any given application. Drawing on many years of experience provided by
an application group the correct pump and accessories are selected to give
safe and reliable performance to match the process conditions.
The applications group can provide a comprehensive sizing of a pump system using in-house designed software package which ensures the optimal
selection of pump sizes taking into account the process conditions, pipework and configuration of the pumpset.
2
1
8
3
7
US ORDERING INFORMATION
To choose the correct accessories for your application, refer to the
information about GV accessories in the introduction (see page 87).
Dry pump
2 GV80
A GV260M
3 GV160
B GV410M
4 GV250
C GV600M
5 GV400
D GV260M + skid
6 GV250 + skid
E GV410M + skid
7 GV400 +skid
F GV600M + skid
Booster selection
0 No booster
1 EH250
2 EH500
3 EH1200
4 EH2600
5 EH4200
Gas and water flow control panel
0 No gas water control
1 Shaft-seal (SS)
A Atmospheric ss purge
2 SS + gas ballast + exhaust purge (EP)
3 SS + GB + exhaust purge ((EP) + flow switch
4 SS + water
B Atmospheric ss purge + water
5 SS + GB + EP + water
6 SS + GB + EP + flow switch + water
Pump cooling
1 Direct water cooling
3 Indirect cooling + temperature
control valve
N.B. Air blast cooling option available
on request
J
6
–
–
4
5
1
Booster connection kit
5
Indirect cooling kit
2
Inlet filter
6
Exhaust silencer
3
Audible alarm
7
Gas and water control panel
4
TCV Temperature control valve
8
Motor control module
UK ORDERING INFORMATION
To order any GV Pump system, please contact your local BOC Edwards
representative or call direct on +44 (0)1293 528844
Acoustic enclosures
No enclosures
0
GV motor muffler (not available on 1
GV80/GV160)
Pump enclosure
2
Silencer only
3
GV motor muffler + exhaust silencer 4
(not available on GV80/GV160)
Pump enclosure + exhaust silencer 5
(not available on GV80 & pump + skid
option)
Booster motor muffler
6
Combination enclosure (available
7
on pump + skid option)
GV + booster muffler + exhaust
8
silencer
Combination enclosure + exhaust
9
silencer (not available on GV80/GV160
Voltage options
230 V 60 Hz
0
460 V 60 Hz
1
380/400/415 V 50Hz
2
200/212 V 50 Hz
3
200/212 V 60 Hz
4
Electric controls
No control
0
Bacic MCM control wall mount
3
Basic MCM control frame mount 4
PLC control wallmount
5
PLC control frame mount
6
Control voltage
24 V AC
110 V AC
220 V AC
6
7
8
DRY PUMPING COMBINATIONS
4000
GV600M, 50Hz
3500
EH4200
50 Hz pumping speed curves for GV80-600M and
combinations:
3000
m3 h-1
2500
900
GV80M, 50Hz
800
700
2
1500
PAGE
97
EH1200
1000
600
500
EH500
400
0
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3 mbar
10 -1
10 0
10 1
10 2
10 3
10 4
10 5 Pa
300
200
EH250
100
0
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3 mbar
10 -1
10 0
10 1
10 2
10 3
10 4
10 5 Pa
2000
GV160M, 50Hz
1750
1500
m3 h-1
1250
EH2600
EH1200
1000
750
EH500
500
250
0
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3 mbar
10 -1
10 0
10 1
10 2
10 3
10 4
10 5 Pa
2250
GV260M, 50Hz
2000
1750
m3 h-1
1500
1250
EH2600
EH1200
1000
750
EH500
500
250
0
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3 mbar
10 -1
10 0
10 1
10 2
10 3
10 4
10 5 Pa
3500
GV410M, 50Hz
EH4200
3000
2500
m3 h-1
EH2600
2000
1500
EH1200
1000
500
0
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3 mbar
10 -1
10 0
10 1
10 2
10 3
10 4
10 5 Pa
500
EH1200
m3 h-1
EH2600
2000
60 Hz pumping speed curves for GV80-600M and
combinations:
2500
GV600M, 60Hz
2250
700
GV80, 60Hz
1750
600
2
500
PAGE
98
400
ft 3 min -1
ft 3 min -1
EH1200
1500
EH2600
1250
1000
750
EH500
EH1200
300
500
250
200
EH250
0
10 -3
100
0
10 -3
EH4200
2000
10 -2
10 -1
10 0
10 1
10 2
10 -2
10 -1
10 0
10 1
10 3 Torr
1400
GV160, 60Hz
EH2600
1200
ft 3 min -1
1000
800
EH1200
600
400
EH500
200
0
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3 Torr
2500
GV260M, 60Hz
2250
2000
1750
ft 3 min -1
EH4200
1500
1250
EH2600
1000
EH1200
750
500
EH500
250
0
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3 Torr
2500
GV410M, 60Hz
2250
EH4200
2000
ft 3 min -1
1750
1500
EH2600
1250
1000
750
EH1200
500
250
0
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3 Torr
10 2
10 3 Torr
ITF3000 and ITM3000/5000 dimensions
ITM HIGH CAPACITY INLET DUST
FILTERS
ØA
G
H
C
B
2
ØE
3000
PAGE
99
F
A
B
C
D
E
F
G
H
mm
460
570
420
153
153
8 x Ø11 x
Ø200
300
16
in
18.1
22.4
16.5
6.0
6.0
0.3 x Ø0.4 11.8
x Ø7.9
mm
460
773
568
262
262 12 x Ø11 x
Ø310
325
16
in
18.1
30.4
22.4
10.3
10.3 0.5 x Ø0.4 12.8
x Ø7.9
0.6
5000
PRODUCT DESCRIPTION
ORDERING NUMBER
ITM100 high capacity dust filter (7.2 kg/16 lb)*
ITM300 high capacity dust filter (8.7 kg/19 lb)†
ITM800 inlet dust filter (20.2 kg/44 lb)**
ITM3000 inlet dust filter††
ITM5000 inlet dust filter
* Supplied with bolts, washers, 40 mm ‘ O’ ring and centering ring
† Supplied with 63 mm Co-Seal, bolts and washers
** Supplied with 100 mm Co-Seal, bolts and washers
†† Supplied with 160 mm Co-Seal, bolts and washers
A443-02-000
A443-03-000
A443-04-000
A443-12-000
A443-13-000
SPARES
ORDERING NUMBER
ITM100 filter element
ITM3000 filter element (2 required)
A223-05-020
A223-05-019
A223-05-018
A223-05-033
Dimensions of ITO, ITC, ITF and ITM filters
E
A
0.62
ITF INLET DUST FILTERS
The ITF inlet dust filters prevent the entry of dust particles into the pump.
The impedance of a clean filter reduces the pumping speed of a 20 m3h-1 /
12 ft3min-1 pump by about 20% at 1 mbar / 0.75 Torr and 25% at 10 mbar
/ 7.5 Torr.
Depending on your application, you can normally clean the filter element
with a vacuum cleaner or a clean air blast, and then re-use the element.
The benefits of the ITF filters include:
• Thick aluminum casting, to withstand abrasion
• Tangential entry port, to promote centrifugal separation of dust
particles
• Filter efficiency better than 96% (tested to BS2831, dust number 2)
G
D
C
B
F
PRODUCT DESCRIPTION
A
B
C
D
E
F
G
mm
227
251
182
62
92
145
ISO 40
in
8.9
9.9
7.2
2.4
3.6
5.7
300
mm
227
308
210
62
80
165
in
8.9
12.1
8.3
2.4
3.1
6.5
800
mm
285
456
315
81
97
200
in
11.2
18.0
12.4
3.2
3.8
7.9
100
ISO 63
ISO 100
ITF100 inlet dust filter (7.0 kg/15 lb)*
ITF300 inlet dust filter (8.3 kg/18 lb)†
ITF800 inlet dust filter (20.2 kg/44 lb)**
ITF3000 inlet dust filter††
††
Supplied with 160 mm Co-Seal, bolts and washers
SPARES
ITF100 element and gasket kit
ITF3000 element (2 required)
ORDERING NUMBER
A442-02-000
A442-03-000
A442-04-000
A442-12-000
ORDERING NUMBER
A442-02-800
A442-03-800
A442-04-800
A223-04-037
The benefits of the ITM filters include:
• Thick aluminum casting, to withstand abrasion
• Tangential entry port, to promote centrifugal separation of dust
particles
• Filter efficiency better than 90% (tested to BS2831, dust number 2)
• Glass cover, to allow a visual check of the filter element
ØD
The ITM deep, stainless steel mesh elements are ideal for applications
where fast pump-down times are required and which produce high levels
of dust and grit (which would normally clog the ITF filters very quickly).
You can wet the stainless steel mesh element with oil to improve dust
adhesion. You can wash the mesh elements and re-use them indefinitely.
ITO INLET CATCHPOTS
2
PAGE
100
These catchpots minimize the entry of condensable vapors into the pump.
Benefits of the catchpots include:
• Capture condensable vapors
• Helps prevent froth or spray from the process from carrying over to the
pump
• Corrosion-resistant body
• Visual indication of trapped liquid level
• Hand-tightened drain plug, for easy drainage
PRODUCT DESCRIPTION
ORDERING NUMBER
ITO100 inlet catchpot, 5.47 liters/5.2 qt capacity
(6.8 kg, 15 lb)*
ITO300 inlet catchpot, 7.87 liters/7.5 qt capacity
(8.0 kg/18 lb)†
IT0800 inlet catchpot, 9.5 liters/10 qt capacity
(19.5 kg/43 lb)**
A441-02-000
A441-03-000
A441-04-000
ITC INLET CHEMICAL TRAPS
The ITC series of chemical traps provides the following benefits:
• Protection against various aggressive vapors, which may attack the pump
or pump oil
• Prevent high molecular weight vapors (such as might arise in a resin
treatment plant), from reaching the pump. These vapors could cause
lacquering or clogging
• The standard sorbent (activated charcoal), has relatively high trapping
properties (absorbs around 25% of its own weight), even when large
amounts of water vapor are being pumped
• When filled with activated alumina on two-stage pumps, backstreaming
of pump oil can be controlled
PRODUCT DESCRIPTION
ORDERING NUMBER
ITC100 inlet chemical trap*
Charcoal charge 0.75 kg/1.7 lb, weight 16.5 kg/
1.7 lb
ITC300 inlet chemical trap†
Charcoal charge 1.1 kg/2.4 lb, weight 9 kg/20 lb
ITC800 inlet chemical trap**
Charcoal charge 3.3 kg/2.4 lb, weight 21 kg/20 lb
†
Supplied with 63 mm Co-Seal, bolts and washers
SPARES
A444-02-000
A444-03-000
A444-04-000
ORDERING NUMBER
0.5 kg/1.1 lb activated charcoal
3 kg/6.6 lb activated charcoal
0.45 kg/1 lb activated alumina
0.2 kg/0.5 lb activated alumina
H122-05-001
H122-05-002
H026-00-050
H026-00-056
MECHANICAL BOOSTER PUMPS
mineral oils, such as Ultragrade 20. The alternative version has PFPE (perfluoropolyether) oils and is suitable for applications where oxygen or other
reactive and corrosive gases are processed.
Pa
10
The EH and EDD mechanical booster pumps, based on the simple Roots
principle, remain the favorite pumps for applications where high pumping
speeds over 3000 m3h-1 / 176 ft3min-1 are required in the pressure region
of 0.01 to 50 mbar / 0.0075 to 37.5 Torr. These pumps must always be
backed by another pump which can deliver against a high pressure differential to atmospheric pressure.
10
mbar
5
10
4
10
3
2
C
10
3
10
1
Operating at relatively low pressures, the mechanical booster pump is not
exposed to the same concentrations of corrosive process media as is the
backing pump, which makes it highly reliable.
High performance pumping mechanism
The EH and EDD pumps both have the same high quality, oil-free pumping
mechanism. This offers:
• Quiet, vibration free operation
• Rugged and corrosion resistant
• Advanced shaft-seal technology - no oil contamination of process
chamber
A
10
2
10
1
10
200
400
600
s
A
With backing pump and EH mechanical booster pump switched on together
B
With mechanical booster pump switched on at 5 mbar
C
With backing pump only (pumping through booster pump)
10
10
3
2
Torr
C
10
1
EH pumps with hydrokinetic drive
EH booster pumps have universal voltage, air-cooled motors and are available with effective pumping speeds of up to 4140 m3h-1 / 4140 ft3min-1.
The pump bodies of the EH1200, EH2600 and EH4200 pumps are watercooled.
-1
0
The design of the shaft seals is optimized to ensure that no lubricants can
migrate into the pumping mechanism. This maintains booster pump performance in applications which demand the highest standard of cleanliness. In
addition, this prevents the build-up of trapped particles on the rotor lobes
and end-faces which have very close tolerances.
EH booster pumps have a unique and patented hydrokinetic fluid drive,
which couples the motor to the pumping mechanism. The hydrokinetic
drive offers the following advantages:
• Pump down times cut by up to 50%
• Reduced capital and operating costs
• No pressure sensors, by-pass lines or valves
• Can operate continuously at all pressures - when used with a backing
pump
0
B
The corrosion resistant pumping mechanism is manufactured from high
grade cast iron. The proven shaft-seal arrangement ensures that no oil
enters the pumping stator, and the absence of internal and external by-pass
lines and valves which may corrode or stick minimizes maintenance
requirements.
The dynamically balanced rotors and precision ground gears contribute to
the smooth, quiet operation of the pumps, as demanded by manufacturers
of advanced technology equipment.
10
A
10
0
B
10
-1
0
200
400
600
s
A
With backing pump and EH mechanical booster pump switched on together
B
With mechanical booster pump switched on at 5 mbar
C
With backing pump only (pumping through booster pump)
Two versions of each EH booster pump are available, with different oils
used for the lubrication of the seals and gears. The standard version uses
2
PAGE
101
Pump-down times cut by up to 50% The hydrokinetic drive allows
the booster pump to be started at the same time as the backing pump (at
atmospheric pressure) as it prevents motor overload. The EH booster
pump therefore assists the pumping process from the start of pump-down.
In comparison pumping systems with conventional, direct drive mechanical
booster pumps (where the booster pump is switched on when the chamber pressure has been reduced to, typically, less than 10 mbar / 7.5 Torr),
the total evacuation time can be reduced by as much as 50%. The graph
below shows data for a 2.8 m3 / 100 ft3 chamber, with a 2600 m3h-1 /
2600 ft3min-1 mechanical booster pump and a 255 m3h-1 / 150 ft3min-1
backing pump.
2
PAGE
102
Automatic overload protection The hydrokinetic drive automatically
varies the rotational speed of the pump. This protects the motor from
overload, prevents over-heating, and allows the pump to operate with high
pressure differentials. Consequently, EH booster pumps are not damaged
by sudden increases of inlet pressure and even by the entry of solid debris
into the pump.
BOC Edwards Stokes Vacuum 6" mechanical booster
pumps
Important cost savings When you use EH mechanical booster pumps,
you save money on installation and operation. Your capital costs are
reduced as you do not need valves, by-pass lines and pressure switches,
and you can use a smaller backing pump than with conventional drive
booster pumps. Operation costs are reduced because EH booster pumps
have smaller motors than direct drive pumps and, when operating at full
speed, they use only a fraction of the rated power.
EDD pumps with direct drive
The EDD mechanical booster pumps have effective pumping speeds
of up to1 4140 m3h-1 / 2940 ft3min-1. The high power motors are coupled
to the pumping mechanism with a direct drive that maintains a constant
high pressure differential. The pump bodies are water-cooled and are oriented for vertical gas flow with optional side exhaust on the larger pumps.
The pump’s direct drive means that the pumping speed is maintained when
the pumps are used for applications where contaminants may accumulate
in the pump.
The BOC Edwards Stokes Vacuum 6" mechanical booster range operates
on the Roots principle.
Product description The BOC Edwards Stokes Vacuum 6" mechanical
booster is a rotary displacement unit consisting of two profiled contrarotating dynamically balanced impellers. These provide vibration free and
quiet operation. Internal seals provide maximum resistance to heat corrosion and protect lubrication oil from the process gas and debris ensuring
no oil contamination of the process chamber occurs. High pressure differentials across the pump are possible, although thermal effects may have to
be considered for extended periods of operation.
Three sizes are available 1020, 2210, 3400 m3h-1 / 600, 1300, 2000 ft3min1
and are available in a number of configurations:
• Bare shaft
• Direct drive single speed motor
• By pass valve technology to shorten pumpdown times
Both horizontal and vertical gas flow variants are available.
ACCESSORIES (EH EDD AND MB)
The MB mechanical booster range operates on the Roots principle are
need to be combined with a backing pump as they can not discharge to
atmosphere. Impellers and rotors are constructed from cast iron, making
them highly reliable even when pumping corrosive process media as it is
not in the same concentration as it may be in backing pumps.
Product description The MB mechanical booster is a rotary displacement unit consisting of two profiled contra-rotating dynamically balanced
impellers. These provide vibration free and quiet operation. This combined
with advanced internal seal arrangement ensures no oil contamination of
the process chamber. All models are capable of operating with up to a 500
mbar pressure differential across the pump, although thermal effects may
have to be considered for extended periods of operation.
To improve the performance of the mechanical booster pumps in your
application, select suitable accessories from our range.
• Use inlet dust filters to trap grit and other particles in the process gases
• Use oil mist filters to trap oil mist from the exhaust of the backing pump,
MB and BOC Edwards Stokes Vacuum 6" (if oil sealed pumps are
selected), particularly important when the pumps are operated with high
throughputs for long periods
• Use inlet and outlet catchpots to trap liquids before they can enter the
pumps
• MB mechanical booster pumps
• BOC Edwards Stokes Vacuum 6" mechanical booster pumps
Five sizes are available 800, 1200, 2600, 4200 and 5700 m3h-1 / 477, 719,
1520, 2521, and 3357 ft3min-1 and all are available in four options:
• Bare shaft
• Motor flange and coupling for customers to fit their own motor
• Direct drive fitted with single speed motors
• Direct drive fitted with variable speed motors
In all cases both horizontal gas flow or vertical gas flow variants are available.
HV OIL-FREE VACUUM PUMP SYSTEMS
• Thermal processing
The EH, EDD, MB and BOC Edwards Stokes Vacuum 6" pumps are used
in a wide range of applications.
When backed with a suitable primary pump, the pumps are most useful in
the range 500 to 1 x 10-3 mbar. Use more than one booster pump in series
to achieve low system pressures.
2
PAGE
103
1
2,000
3
-1
ls
2
100
4
10
10
10
-4
10
-2
10
-3
10
-1
10
-2
10
0
10
-1
10
1
10
0
10
2
10
1
10
3
10
2
4
mbar
Pa
• Dry operation vacuum pump systems with pumping speed from 11000
to 30000 m3h-1 / 7900 - 17700 ft3min-1
• Dresser’s Roots technology combined with BOC Edwards vacuum
expertise in dry industrial pumps and mechanical booster pumps
1
2,000
A winning combination
The Dresser HV pumps are based on their well proven HR series and will
be exclusively distributed by BOC Edwards. Dresser’s worldwide service
and support will be complemented by BOC Edwards extensive sales and
service organization.
Dresser Roots HV pumps
-1
ls
The HV pump systems combine BOC Edwards expertise in manufacture
and assembly of complete industrial vacuum systems with Dresser’s worldrenowned Roots pump technology. We use BOC Edwards’ GV, DP
Drystar® pumps or BOC Edwards Stokes Vacuum oil sealed piston pumps
and EH, EDD, MB or BOC Edwards Stokes Vacuum LRP’s 6" mechanical
boosters to back the HV.
3
1,000
2
100
4
10
10
-4
10
-3
10
-2
10
-1
0
10
1
10
2
Torr
As shown in the diagrams above, in their most efficient range, booster
pumps (1) fill the gap between the pumping speeds of vapor diffusion
pumps (2), vapor booster pumps (3) and rotary or dry high vacuum pumps
(4).
• Oil-free, vertical flow orientation as standard (horizontal flow available
on some pumps)
• Direct drive with flange mounted motors, and thermal snap-switch to
prevent over-temperature seizure
• Reliable, water-cooled bearings and seals, with after-cooler
This new range of high capacity mechanical booster pumps is designed to
operate reliably for long periods with no need for maintenance. The HV
pumps can be fitted with an inverter to allow them to be started at atmospheric pressure, at the same time as the dry pumps. An optional inverter
also allows the HV11000 and HV14000 to operate at 60 Hz from a 50 Hz
supply.
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
10
Semiconductor processing
Vacuum distillation
Vacuum packaging
Steel degassing
Thin film coating
Vacuum metallurgy
Low density wind tunnels
Space simulation
Vacuum impregnation
Oil drying and degassing
Pharmaceutical freeze drying
CO2 lasers
Automotive manufacture
Chemical processing
1,000
EH250 MECHANICAL BOOSTER PUMP
10
3
TECHNICAL DATA
3h-1
10
E2M80
2
E1M80
ft3min-1
/ 141
240 m
274 m3h-1 / 161 ft3min-1
E2M40
EH250, 60Hz
0 - 2900 rpm
0 - 3500 rpm
2 × 10-2 mbar /
1.5 x 10-2 Torr
2 × 10-3 mbar /
1.5 x 10-2 Torr
1 × 10-3 mbar /
0.75 x 10-2 Torr
0 - 1000 mbar /
0 - 760 Torr
1000 mbar /
760 Torr
10
1
10
10
-2
10
-1
10
0
10
1
10
2
10
3
Torr
ISO63
125
(4.92)
231 (9.09)
682 (26.85)
98 (3.86)
3 x M10 x 15 (0.59)
ISO40
8 (0.32)
187.5 (7.38)
220 - 240 V/380 - 415 V
208 - 230 V/460 V
1.5 kW / 2 hp
5 - 40 °C/40 - 104 °F
-10 to 80 °C/14 - 176 °F
90% RH
292 (11.50)
Inlet connection
Outlet connection
Electrical supply voltage, 3-phase
50Hz
60 Hz
Motor power
Ambient temperature range
Operating
Storage
Maximum operating humidity
Recommended oil
Standard version
PFPE version
Oil capacity
Coupling cover
Shaft seal reservoir
Weight
-3
140 (5.51)
Recommended backing pumps
10
138 (5.43)
0 - 180 mbar /
1.5 x 10-2 Torr
0 - 150 mbar /
1.5 x 10-2 Torr
GV80, E1M/E2M40,
E1M/E2M80
ISO63
ISO40
60 Hz supply
-4
270 (10.63)
Pressure differential across pump3
50 Hz supply
Pump is shown with inlet and outlet blanking flanges fitted. Dimensions are to the top
surface of the pump flange.
Ultragrade 20
Fomblin YVAC 16/6
1.5 l / 1.6 qt
1.25 l / 0.25 qt
61 kg / 134 lb
PRODUCT DESCRIPTION
1 Effective pumping speed for air at 0.3 mbar with 50 Hz supply. Effective pumping speed with 60 Hz
supply will be at least 20% higher than operation with 50 Hz supply.
2 Depends on pressure.
3 Determined by the hydrokinetic drive.
10
ft 3 min -1
310 m3h-1 / 185 ft3min-1
375 m3h-1 / 220 ft3min-1
Ø183 (7.21)
PAGE
104
50 Hz supply
60 Hz supply
Effective pumping speed1 with backing pump
E1M40 or E2M40
E1M80 or E2M80
Rotational speed2
50 Hz supply
60 Hz supply
Total pressure, single stage backing
pump, with gas ballast
Ultimate pressure, permanent gases,
single stage backing pump, no gas ballast
Total pressure, two stage backing
Operating continuous inlet pressure
range (with suitable backing pump)
Maximum outlet pressure
3
EH250, 50Hz
Standard
PFPE
EH250, 60Hz
Standard
PFPE
ORDERING NUMBER
A301-51-935
A301-53-935
A301-52-936
A301-54-936
Pump is supplied fitted with one trapped ‘ O’ ring, one Co-Seal and flange covers. Standard pumps are
supplied with Ultragrade 20 oil. PFPE pumps are supplied without PFPE oil.
SPARES
10
2
4
2
Module kit
Shim kit
3
5
EH250, 50Hz
10
1
10
10
-4
10
-2
ORDERING NUMBER
The clean and overhaul kit contains seals, gaskets, sleeves and other components required for routine
maintenance and whenever the pump is dismantled. The module kit contains additional bearings and
seals for a full service. The shim kit contains a selection of shims for correct pump set-up.
1
m 3 h -1
2
GV80
E1M40
10
-3
-1
10
10
-2
10
0
10
-1
1
10
10
0
2
1
50 Hz E2M80
2
50 Hz E2M40
4
50 Hz E1M40
5
50 Hz E1M80
10
10
1
3
3
10
10
2
4
10
10
3
5
mbar
Pa
50 Hz GV80
A301-51-815
A301-51-820
A301-51-825
EH500A MECHANICAL BOOSTER PUMP
10
3
TECHNICAL DATA
505 m3h-1 / 300 ft3min-1
605 m3h-1 / 355 ft3min-1
ft 3 min -1
E2M80
10
/ 206 ft3min-1
/ 236 ft3min-1
/ 259 ft3min-1
/ 271 ft3min-1
GV80
E1M80
EH500, 60Hz
0 - 2900 rpm
0 - 3500 rpm
2 × 10-2 mbar /
1.5 x 10-2 Torr
2 × 10-3 mbar /
1.5 x 10-2 Torr
1 × 10-3 mbar /
0.75 x 10-3 Torr
0 - 1000 mbar /
0 - 760 Torr
1000 mbar /
760 Torr
-4
10
-3
10
-2
10
-1
10
0
10
98
(3.86)
Torr
212 (8.35)
292 (11.50)
146 (5.75)
196 (7.72)
PRODUCT DESCRIPTION
1.5 l / 1.6 qt
1.25 l / 0.25 qt
74 kg / 163 lb
EH500A, 50Hz
Standard
PFPE
EH500, 60Hz
Standard
PFPE
ORDERING NUMBER
A302-71-935
A302-73-935
A302-72-936
A302-74-936
Pump is supplied fitted with 2 trapped ‘ O’ rings and flange covers. Standard pumps are supplied with
Ultragrade 20 oil. PFPE pumps are supplied without PFPE oil.
3
SPARES
2
Module kit
Shim kit
2
3
4
EH500, 50Hz
1
-4
10
-2
ORDERING NUMBER
1
m 3 h -1
3
4 x M8 x 16 (0.63)
115 (4.52)
222 (8.74)
5 - 40 °C / 40 - 104 °F
-10 to 80 °C / 14 - 176 °F
90% RH
Ultragrade 20
Fomblin YVAC 16/6
ISO63
Ø182 (7.16)
220 - 240 V/380 - 415 V
208 - 230 V/460 V
1.5 kW / 2 hp
10
10
106
(4.17)
234 (9.21)
0 - 110 mbar / 0 - 68 Torr
0 - 90 mbar / 0 - 825 Torr
GV80, GV160,
E1M/E2M80
ISO100
ISO63
10
2
179 (7.05)
will be at least 20% higher than operation with 50 Hz supply.
10
10
ISO100
1 Effective pumping speed for air at 0.3 mbar with 50 Hz supply. Effective pumping speed with 60 Hz supply
10
1
770 (30.32)
M10 x 15 (0.59)
Inlet connection
Outlet connection
50Hz
60 Hz
Motor power
Operating
Storage
Recommended oil
Standard version
PFPE version
Oil capacity
Coupling cover
Weight
10
1
10
50 Hz supply
60 Hz supply
PAGE
105
GV160
350 m3h-1
400 m3h-1
440 m3h-1
460 m3h-1
10
Rotational speed2
50 Hz supply
60 Hz supply
2
2
10
-3
-1
10
10
1
50 Hz E2M80
4
50 Hz GV160
-2
10
0
10
2
-1
1
10
10
0
2
50 Hz GV80
10
10
1
3
3
10
10
2
4
10
10
3
5
mbar
Pa
50 Hz E1M80
A301-51-815
A301-51-820
A301-51-825
50 Hz supply
60 Hz supply
E1M40 or E2M40
E1M80 or E2M80
E1M175 or E2M175
E1M275 or E2M275
10
3
1
TECHNICAL DATA
3
Pressure differential across pump
50 Hz supply
60 Hz supply
3
Inlet connection
Outlet connection
50 Hz
60 Hz
Motor power
Operating
Storage
Recommended cooling water flow
(inlet temperature 20 °C)4
Recommended cooling water supply
pressure
Cooling water connections
Recommended oil
Standard version
PFPE version
Oil capacity
Gear case
Coupling cover
Weight
1
840 m3h-1 / 495 ft3min-1
930 m3h-1 / 548 ft3min-1
1020 m3h-1 / 601 ft3min-1
EH1200, 50Hz
10
1
10
0 - 2900 rpm
0 - 3500 rpm
10
-4
-2
2 × 10-2 mbar /
1.5 x 10-2 Torr
10
0 - 1000 mbar /
760 Torr
1000 mbar /
760 Torr
10
-1
10
10
1
50 Hz E2M175
4
50 Hz E2M80
-2
10
0
10
2
-1
1
10
10
0
10
2
10
50 Hz GV160
1
10
3
10
3
2
10
4
10
3
5
mbar
Pa
50 Hz GV250
3
2 × 10-3 mbar /
1.5 x 10-2 Torr
1 × 10-3 mbar /
0.75 x 10-3 Torr
10
-3
E2M175
E2M80
10
2
GV160
GV250
EH1200, 60Hz
0 - 90 mbar / 0 - 68 Torr
0 - 75 mbar / 0 - 56 Torr
GV160, GV250, E2M80,
E2M175
ISO160
ISO100
10
1
10
-4
10
-3
10
-2
10
-1
10
0
10
5 - 40 °C / 40 - 104 °F
-10 to 80 °C / 14 - 176 °F
90% RH
120 l h-1 /
0.53 US gal min-1
10
2
10
3
Torr
947 (37.28)
277 (10.91)
ISO160
220 - 240 V/380 - 415 V
208 - 230 V/460 V
3 kW / 4 hp
1
110
(4.33)
M12 x 15 (0.59)
230 (9.06)
2 - 6 bar
£/8 inch BSP male
ISO100
316 (12.44)
10
180 (7.09)
/ 715
1195 m
1435 m3h-1 / 845 ft3min-1
4
2
48
(1.89)
ft3min-1
ft 3 min -1
Rotational speed2
50 Hz supply
60 Hz supply
3h-1
348 (13.70)
PAGE
106
50 Hz supply
60 Hz supply
E1M80 or E2M80
E1M175 or E2M175
E1M275 or E2M275
Ø218 (8.58)
2
m 3 h -1
2
220 (8.66)
380 (14.96)
Ultragrade 20
Fomblin YVAC 16/6
1.25 l / 1.3 qt
2.4 l / 2.5 qt
0.125 l / 0.25 qt
149 kg / 329 lb
4 x Ø18 (0.71)
260 (10.24)
Effective pumping speed for air at 0.3 mbar with 50 Hz supply. Effective pumping speed with
60 Hz supply will be at least 20% higher than operation with 50 Hz supply.
2
Depends on pressure.
3
Determined by the hydrokinetic drive.
4 Under many circumstances the EH1200 may operate without cooling water. Apply to BOC Edwards
for more information.
PRODUCT DESCRIPTION
EH1200, 50Hz
Standard
PFPE
EH1200, 60Hz
Standard
PFPE
ORDERING NUMBER
A305-90-935
A305-92-935
A305-91-936
A305-93-936
SPARES
ORDERING NUMBER
Module kit
Shim kit
A305-51-815
A305-51-820
A305-51-825
2
PAGE
107
10
4
50 Hz supply
60 Hz supply
Inlet connection
Outlet connection
50 Hz
60 Hz
Motor power
Hydrocarbon
PFPE
Operating
Storage
(inlet temperature 20 °C)4
pressure
Recommended oil
Standard version
PFPE version
Oil capacity
Gear cover
Coupling cover
Weight
1
4
ft3min-1
3
/ 1031
1750 m
1900 m3h-1 / 1119 ft3min-1
2
EH2600, 50Hz
10
2
0 - 2900 rpm
0 - 3500 rpm
10
10
-4
-2
2 × 10-2 mbar /
1.5 x 10-2 Torr
2 × 10-3 mbar /
1.5 x 10-2 Torr
10
10
10
-3
-1
10
10
1
50 Hz E2M275
4
50 Hz GV250
-2
10
0
10
2
-1
1
10
10
0
10
2
10
50 Hz E2M175
1
10
3
10
3
2
10
4
10
3
5
mbar
Pa
50 Hz GV400
4
EH2600, 60Hz
1 × 10-3 mbar /
0.75 x 10-3 Torr
GV250
GV400
0 - 1000 mbar /
0 - 760 Torr
1000 mbar / 760 Torr
0 - 80 mbar / 0 - 60 Torr
0 - 67 mbar / 0 - 50 Torr
GV250, GV400, E2M175,
E2M275
ISO160
ISO100
10
3
E2M275
E2M175
10
2
10
-4
10
-3
10
-2
10
-1
10
0
10
1225 (48.23) (50Hz)
1093 (43.03) (60Hz)
220 - 240 V/380 - 415 V
208 - 230 V/460 V
1
10
2
10
3
Torr
312 (12.28)
11 kW / 14.6 hp
7.5 kW / 9.75 hp
5 - 40 °C / 40 - 104 °F
-10 to 80 °C / 14 - 176 °F
90% RH
250 l h-1 / 1.1 US gal min-1
2 - 6 bar
£/8 inch BSP male
461 (18.15)
3
285 (11.22)
3h-1
10
M16 x 16
275 (10.83)
110
(4.33)
220 (8.66)
481 (18.94)
Ultragrade 20
Fomblin YVAC 16/6
245
(9.65)
ISO160
3.5 l / 3.3 qt
6.5 l / 7 qt
1.5 l / 1.4 qt
308 kg / 679 lb
1 Effective pumping speed for air at 0.3 mbar with 50 Hz supply. Effective pumping speed with
4Under many circumstances the EH2600 may operate without cooling water. Apply to BOC Edwards
375 (14.76)
Rotational speed2
50 Hz supply
60 Hz supply
2590 m3h-1 / 1525 ft3min-1
3110 m3h-1 / 1830 ft3min-1
ft 3 min -1
PAGE
108
50 Hz supply
60 Hz supply
E1M175 or E2M175
E1M275 or E2M275
Ø312 (12.28) (50Hz)
Ø260 (10.24) (60Hz)
2
m 3 h -1
TECHNICAL DATA
*
4 x Ø22
370 (14.57)
ISO100
1 Alternative outlet position
PRODUCT DESCRIPTION
EH2600, 50Hz
Standard
PFPE
EH2600, 60Hz
Standard
PFPE
ORDERING NUMBER
A307-51-946
A307-53-935
A307-52-982
A307-54-936
SPARES
ORDERING NUMBER
Module kit
Shim kit
A307-51-815
A307-51-820
A307-51-825
2
PAGE
109
10
4
TECHNICAL DATA
50 Hz supply
60 Hz supply
Inlet connection
Outlet connection
50 Hz
60 Hz
Motor power
Hydrocarbon
Fomblin
Operating
Storage
(inlet temperature 20°C)4
pressure
Recommended oil
Standard version
PFPE version
Oil capacity
Gear cover
Coupling cover
Weight
m 3 h -1
EH4200, 50Hz
10
-2
2 × 10 mbar /
1.5 x 10-2 Torr
2
10
10
-4
-2
2 × 10-3 mbar /
1.5 x 10-2 Torr
0 - 60 mbar / 0 - 45 Torr
0 - 50 mbar / 0 - 38 Torr
GV400, E2M275
ISO250
ISO100
10
1
10
1 × 10-3 mbar /
0.75 x 10-3 Torr
0 - 1000 mbar /
0 - 760 Torr
1000 mbar / 760 Torr
10
-3
10
-1
10
-2
10
0
10
50 Hz E2M275
2
-1
10
1
10
0
10
2
10
1
10
3
10
2
10
4
10
3
5
mbar
Pa
50 Hz GV400
4
EH4200, 60Hz
E2M275
10
3
GV400
10
2
10
220 - 240 V/380 - 415 V
208 - 230 V/460 V
-4
10
-3
10
-2
10
-1
10
0
10
1
1405 (55.32) (50Hz)
1273 (50.12) (60Hz)
11 kW / 14.6 hp
7.5 kW / 9.75 hp
10
2
10
3
Torr
402 (15.83)
5 - 40 °C / 40 - 104 °F
-10 to 80 °C / 14 - 176 °F
90% RH
250 l h-1 / 1.1 US gal min-1
2 - 6 bar
£/8 inch BSP male
Ultragrade 20
Fomblin YVAC 16/6
461 (18.15)
0 - 2900 rpm
0 - 3500 rpm
285 (11.22)
2
10
3
M16 x 16
290 (11.42)
185
(7.28)
370 (14.57)
481 (18.94)
3.5 l / 3.3 qt
6.5 l / 7 qt
1.5 l / 1.4 qt
400 kg / 882 lb
245
(9.65)
ISO250
375 (14.76)
1
4140 m3h-1 / 2440 ft3min-1
4985 m3h-1 / 2935 ft3min-1
3100 m3h-1 / 3100 ft3min-1
ft 3 min -1
PAGE
110
50 Hz supply
60 Hz supply
Effective pumping speed1 with E1M275 or E2M275
Rotational speed2
50 Hz supply
60 Hz supply
Ø312 (12.28) (50Hz)
Ø260 (10.24) (60Hz)
2
1 Effective pumping speed for air at 0.3 mbar with 50 Hz supply. Effective pumping speed with
4Under many circumstances the EH4200 may operate without cooling water. Apply to BOC Edwards
*
4 x Ø22
370 (14.57)
ISO100
PRODUCT DESCRIPTION
EH4200, 50Hz
Standard
PFPE
EH4200, 60Hz
Standard
PFPE
ORDERING NUMBER
A309-51-946
A309-53-935
A309-52-982
A309-54-936
SPARES
ORDERING NUMBER
Module kit
Shim kit
A307-51-815
A307-51-820
A307-51-825
2
PAGE
111
OIL SEALED PUMPED BOOSTER SYSTEMS
Our comprehensive range of mechanical booster and oil sealed rotary
pumps forms the basis for the manufacture of factory tested combinationpumping systems. These systems have displacements from 310 to
4140 m3h-1.
BOC Edwards rotary pumps are specifically designed with centrally placed
inlets, so that the mechanical booster pump can be mounted on the backing pump with minimum overhang, to give a very compact arrangement.
The pannier-style outlet accessories together with the absence of gas-lines
and pressure switches contribute further to the neat, compact designs.
2
PAGE
112
ORDERING INFORMATION - ALL TERRITORIES EXCEPT NORTH AMERICA
RB
Rotary pump
(includes pump, frame, and coupling
components)
Voltage
0
1
2
3
4
5
6
7
8
B
C
D
E
Frequency
None
E1M40
E1M40 and oil level switch
E2M40
E1M80
E2M80
E1M175
E2M175
E1M275
E2M275
Booster pump
(includes booster and coupling components)
0
1
2
3
4
5
6
7
8
None
EH250
EH250 and oil level switch
EH500
EH1200
EH2600
EH4200
Enter voltage
1
2
50 Hz
60 Hz
Oil
0
1
2
3
None
Ultra-grade (both pumps)
TW (rotary pump only)
PFPE (both pumps)
Electric control
1
2
None
On line starter for each pump
Notes
1
2
3
Other combinations can be supplied on application
Other accessories can be supplied on application
Pumped EOF requires 100-120/200-240 V, 1-ph, 50/
60 Hz electrical supply
Mist filter
0
1
2
3
4
5
6
None
MF100 (E1/2M40/80)
MF100AE (E1/2M40/80)
MF300 (E1/2M175/275)
MF100 with oil return (E1/2M40/80)
MF100AE with oil return (E1/2M40/80)
MF300 with oil return (E1/2M175/275)
Oil filtration (includes connection kit)
1
2
3
4
5
6
7
None
EOF100A (E1/2M40/80)
EOF100M (E1/2M40/80)
EOF300A (E1/2M175/275)
EOF300M (E1/2M175/275)
Pumped EOF E1/2M40/80 25CR
Pumped EOF E1/2M40/80 40CR
In some applications it may be possible to use oil sealed rough pumps or our range of MB mechanical booster pumps as an alternative. Should this be
of interest please discuss your requirements with BOC Edwards or your local representative.
ORDERING INFORMATION - NORTH AMERICA
DM
-
-
G
-
-
DM - Simple direct mount, accessories optional
for self assembly
G - Easy roll around frame, fully assembled
system and tested
Rotary pump
(includes pump, frame, and coupling components)
None
E2M40
E2M80
E2M40 + oil level
E2M80 + oil level
E1M40
E1M80
E1M40 + oil level
E1M80 + oil level
E2M175
E2M275
E1M175
E1M275
None
EH250
EH500
EH1200
EH250 + oil level
EH500 + oil level
EH1200 + oil level
EH2600
EH4200
Mist filter
0
1
2
3
7
8
9
None-PFPE prepared
PFPE
BOC Edwards TW
Ultragrade oil
Electrical Supply (no additional charge)
0
1
2
3
4
5
6
7
Booster pump
(includes booster and coupling components)
0
1
2
3
4
5
6
7
8
0
2
3
4
None
MF100AE (for E1/E2M40, E1/E2M80)
MF100AE with semi-automatic oil return
MF100AE with oil return
MF300
MF300 with semi-automatic oil return
MF300 with oil return
None1
208 V, 60 Hz
230 V, 60 Hz
460 V, 60 Hz
575 V, 60 Hz
220 V, 60 Hz
380 V, 60 Hz
415 V, 60 Hz
Electrical controls – motor control module, stop/start
switches and interlocks (credit)
S Controls Supplied
X No Controls Supplied
EH250, EH500 and EH1200 Combinations
EH2600 and EH4200 Combinations
Flow control
0
1
2
3
4
5
6
7
8
9
None
Dry Nitrogen Box Purge (OB100)
Dry Nitrogen Gas Ballast
External Gas Module (EGM100)
External Gas Module Corrosive Applications
Dry Nitrogen Oil Box Purge and Oil Pressure
Gas Ballast and Oil Pressure Alarm (AOP)
External Gas Module (EGM100) and
Oil Pressure Alarm (AOP)
External Gas Module (EGM100FS) and
Dry Nitrogen Oil Box Purge, Gas Ballast and
Oil filtration (includes connection kit)
0
2
6
8
None
EOF4000 + pressure switch
EOF4000 + outlet pressure
EOF4000
2
PAGE
113
0
1
2
3
4
5
6
7
8
B
C
D
E
Oil (prices included with pump)
EDD2600 DIRECT DRIVE MECHANICAL
BOOSTER PUMP
TECHNICAL DATA
TECHNICAL DATA
1140 m3h-1 / 677 ft3min-1
1380 m3h-1 / 820 ft3min-1
2820 rpm
3420 rpm
100 mbar / 75 Torr
80 mbar / 60 Torr
4 kW / 5.3 hp
10-4 mbar l s-1 /
7.5 x 10-5 Torr ls-1
120 Ih-1 /
0.53 US gal min-1
Cooling water flow at 20 °C inlet temp
Oil charge, vertical flow
Gear and coupling case
Recommended BOC Edwards oil
Weight
120 mbar / 90 Torr
100 mbar / 75 Torr
11 kW / 15 hp
10-4 mbar l s-1 /
7.5 x 10-5 Torr ls-1
250 Ih-1 /
1.1 US gal min-1
10.8 l / 10.3 qt
1.5 l / 1.4 qt
Ultragrade 20
340 kg / 750 lb
1225 (48.23) (50Hz)
1093 (43.03) (60Hz)
312 (12.28)
185
(7.28)
370 (14.57)
285 (11.22)
Ø312 (12.28) (50Hz)
Ø260 (10.24) (60Hz)
461 (18.15)
285 (11.22)
402 (15.83)
M16 x 16
275 (10.83)
110
(4.33)
220 (8.66)
481 (18.94)
481 (18.94)
245
(9.65)
2900 rpm
3500 rpm
Oil charge, vertical flow
Weight
M16 x 16
290 (11.42)
2590 m3h-1 / 1525 ft3min-1
3125 m3h-1 / 1840 ft3min-1
3.2 l / 3.38 qt
0.35 l / 0.37 qt
Ultragrade 20
157 kg / 346 lb
1405 (55.32) (50Hz)
1273 (50.12) (60Hz)
50 Hz
60 Hz
Rotational speed
50 Hz
60 Hz
Maximum pressure differential
50 Hz
60 Hz
Motor power
Leak tightness
245
(9.65)
ISO160
375 (14.76)
375 (14.76)
ISO250
*
4 x Ø22
370 (14.57)
461 (18.15)
50 Hz
60 Hz
Rotational speed
50 Hz
60 Hz
50 Hz
60 Hz
Motor power
Leak tightness
Ø312 (12.28) (50Hz)
Ø260 (10.24) (60Hz)
2
PAGE
114
BOOSTER PUMP
*
ISO100
4 x Ø22
370 (14.57)
ISO100
Pump is shown with inlet and outlet blanking flanges fitted. Dimensions are to the top surface of the pump
flange
flange
PRODUCT DESCRIPTION
ORDERING NUMBER
PRODUCT DESCRIPTION
ORDERING NUMBER
EDD1200 pump
EDD2600 pump
SPARES
SPARES
ORDERING NUMBER
ORDERING NUMBER
Module kit
Shim kit
Module kit
Shim kit
A305-51-815
A305-51-820
A305-51-825
A307-51-815
A307-51-820
A307-51-825
BOOSTER PUMP
MECHANICAL BOOSTER PUMP
ACCESSORIES
TECHNICAL DATA
OLM500 OIL LEVEL MONITOR
2
4140 m3h-1 / 2440 ft3min-1
5000 m3h-1 / 2940 ft3min-1
PAGE
115
2900 rpm
3500 rpm
Oil charge (vertical flow)
Weight
85 mbar / 64 Torr
70 mbar / 53 Torr
15 kW / 20 hp
10-4 mbar l s-1 /
7.5 x 10-5 Torr ls-1
250 l h-1 / 1.1 US gal min-1
10.8 l / 10.3 qt
1.5 l / 1.4 qt
Ultragrade 20
430 kg / 948 lb
Fit the OLM500 in place of the oil sight-glass on the EH250 and EH500 oil
seal reservoirs, and on the EH1200, EH2600 and EH4200 oil seal reservoirs and gear boxes. The OLM500 provides a switched output for remote
activation or warning devices. Technical data: 24 V ac, maximum current
1405 (55.32) (50Hz)
1273 (50.12) (60Hz)
PRODUCT DESCRIPTION
402 (15.83)
ORDERING NUMBER
461 (18.15)
285 (11.22)
Ø312 (12.28) (50Hz)
Ø260 (10.24) (60Hz)
OLM500 oil level monitor
INLET SEAL WITH MESH SCREEN
Designed to prevent objects falling into the inlet of our booster pumps, the
mesh aperture is 3.3mm.
M16 x 16
290 (11.42)
185
(7.28)
370 (14.57)
PRODUCT DESCRIPTION
Inlet seal with mesh screen
ISO63
ISO100
ISO160
481 (18.94)
245
(9.65)
375 (14.76)
ISO250
*
4 x Ø22
370 (14.57)
ISO100
flange
PRODUCT DESCRIPTION
ORDERING NUMBER
EDD4200 pump
SPARES
ORDERING NUMBER
Module kit
Shim kit
A504-34-000
A307-51-815
A307-51-820
A307-51-825
ORDERING NUMBER
C105-21-085
C105-23-085
C105-24-085
50 Hz
60 Hz
Rotational speed
50 Hz
60 Hz
50 Hz
60 Hz
Motor power
Leak tightness
NEW
MB 800 MECHANICAL BOOSTER PUMP
MB booster pumps not available for sale in North America.
PRODUCT DESCRIPTION
50 Hz supply
60 Hz supply
Ultimate
(depending on backing pump)
across pump (standard motor)
50 Hz supply
60 Hz supply
across pump (any circumstances)
Maximum operating temperature of pump
Maximum discharge temperature
Maximum temperature rise across pump
Inlet connection
Outlet connection
Motor power
Recommended oil
Oil capacity (vertical gas flow)
Drive end
Non drive end
Oil capacity (horizontal gas flow)
Drive end
Non drive end
810 m3h-1 / 477 ft3min-1
980 m3h-1 / 524 ft3min-1
1 x 10-3 mbar / 7.5 x 10-4 Torr
150 mbar / 113 Torr
110 mbar / 83 Torr
500 mbar / 375 Torr
145 °C / 293 °F
120 °C / 248 °F
ISO100
ISO100
3 kW / 4 hp
HH V-lube H oil
133 kg / 293 lbs
MB800
Bare shaft pump, horizontal gas flow
Bare shaft pump, vertical gas flow
Motor flange (C type), horizontal gas flow
Motor flange (C type), vertical gas flow
220-240/380-415 V, 3-ph, 50 Hz, horizontal
gas flow
208-230/460 V, 3-ph, 60 Hz, horizontal gas
flow
220-240/380-415 V, 3-ph, 50 Hz, vertical gas
flow
208-230/460 V, 3-ph, 60 Hz, vertical gas flow
208-240 V, 3-ph, 47-63 Hz, variable speed
drive, horizontal gas flow
drive, vertical gas flow
947 (37.28)
338 (13.31)
356 (14.02)
170
ISO100
(6.69)
2
PAGE
116
TECHNICAL DATA
ISO100
ORDERING NUMBER
A310-01-985
A310-02-985
A310-01-970
A310-02-970
A310-01-935
A310-01-936
A310-02-935
A310-02-936
A310-01-992
A310-01-993
A310-01-994
A310-02-992
A310-02-993
A310-02-994
N EW
PRODUCT DESCRIPTION
TECHNICAL DATA
1220 m3h-1 / 719 ft3min-1
1480 m3h-1 / 872 ft3min-1
1 x 10-3 mbar / 7.5 x 10-4 Torr
100 mbar / 75 Torr
75 mbar / 56 Torr
500 mbar / 375 Torr
145 °C / 293 °F
120 °C / 248 °F
ISO160
ISO160
4 kW / 5.3 hp
HH V-lube H oil
173 kg / 381 lbs
1049 (41.30)
338 (13.31)
356 (14.02)
170
(6.69)
ISO160
ISO160
ORDERING NUMBER
A310-05-985
A310-06-985
A310-05-970
A310-06-970
A310-05-935
A310-05-936
A310-06-935
A310-06-936
A310-05-992
A310-05-993
A310-05-994
A310-06-992
A310-06-993
A310-06-994
2
PAGE
117
50 Hz supply
60 Hz supply
Ultimate
50 Hz supply
60 Hz supply
Inlet connection
Outlet connection
Motor power
Recommended oil
Drive end
Non drive end
Drive end
Non drive end
MB1200
gas flow
flow
flow
NEW
PRODUCT DESCRIPTION
50 Hz supply
60 Hz supply
Ultimate
50 Hz supply
60 Hz supply
Inlet connection
Outlet connection
Motor power
Recommended oil
Drive end
Non drive end
Drive end
Non drive end
2580 m3h-1 / 1520 ft3min-1
3120 m3h-1 / 1838 ft3min-1
1 x 10-3 mbar / 7.5 x 10-4 Torr
85 mbar / 64 Torr
65 mbar / 49 Torr
500 mbar / 375 Torr
145 °C / 293 °F
120 °C / 248 °F
ISO160
ISO160
7.5 kW / 10 hp
HH V-lube H oil
340 kg / 748 lbs
MB2600
gas flow
flow
flow
1272 (50.08)
414 (16.30)
409 (16.10)
200
ISO160
(7.87)
2
PAGE
118
TECHNICAL DATA
ISO160
ORDERING NUMBER
A310-09-985
A310-10-985
A310-09-970
A310-10-970
A310-09-935
A310-09-936
A310-10-935
A310-10-936
A310-09-992
A310-09-993
A310-09-994
A310-10-992
A310-10-993
A310-10-994
N EW
PRODUCT DESCRIPTION
TECHNICAL DATA
4280 m3h-1 / 2521 ft3min-1
5160 m3h-1 / 3039 ft3min-1
1 x 10-3 mbar / 7.5 x 10-4 Torr
60 Hz supply
Inlet connection
Outlet connection
Motor power
Recommended oil
Drive end
Non drive end
Drive end
Non drive end
70 mbar (11 kW) /
53 Torr (11 kW)
50 mbar (11 kW) /
38 Torr (11 kW)
500 mbar / 375 Torr
145 °C / 293 °F
120 °C / 248 °F
ISO200
ISO200
7.5 kW or 11 kW /
10 hp or 15 hp
HH V-lube H oil
2 liter / 0.53 US gal
433 kg / 953 lbs
1559 (61.38)
490 (19.29)
471 (18.54)
230
(9.06)
ISO200
ISO200
ORDERING NUMBER
A310-13-985
A310-14-985
A310-13-970
A310-14-970
A310-13-935
A310-13-936
A310-14-935
A310-14-936
A310-13-992
A310-13-993
A310-13-994
A310-14-992
A310-14-993
A310-14-994
A310-17-935
A310-17-936
A310-18-935
A310-21-935
A310-22-935
2
PAGE
119
50 Hz supply
60 Hz supply
Ultimate
50 Hz supply
MB4200
220-240/380-415 V, 3-ph, 50 Hz, 7.5 kW,
horizontal gas flow
208-230/460 V, 3-ph, 60 Hz, 7.5 kW,
horizontal gas flow
220-240/380-415 V, 3-ph, 50 Hz, 7.5 kW,
vertical gas flow
208-230/460 V, 3-ph, 60 Hz, 7.5 kW, vertical
gas flow
208-240 V, 3-ph, 47-63 Hz, 7.5 kW, variable
speed drive, horizontal gas flow
speed drive, vertical gas flow
220-240/380-415 V, 3-ph, 50 Hz, 11 kW,
horizontal gas flow
208-230/460 V, 3-ph, 60 Hz, 11 kW, horizontal
gas flow
220-240/380-415 V, 3-ph, 50 Hz, 11 kW,
vertical gas flow
220-240/380-415 V, 3-ph, 50/60 Hz, 11 kW,
variable speed drive, horizontal gas flow
220-240/380-415 V, 3-ph, 50/60 Hz, 11 kW,
variable speed drive, vertical gas flow
NEW
PRODUCT DESCRIPTION
50 Hz supply
60 Hz supply
Ultimate
50 Hz supply
60 Hz supply
Inlet connection
Outlet connection
Motor power
Recommended oil
Drive end
Non drive end
Drive end
Non drive end
5700 m3h-1 / 3357 ft3min-1
6880 m3h-1 / 4052 ft3min-1
1 x 10-3 mbar / 7.5 x 10-4 Torr
75 mbar / 56 Torr
60 mbar / 45 Torr
500 mbar / 375 Torr
145 °C / 293 °F
120 °C / 248 °F
ISO200
ISO200
15 kW / 20 hp
HH V-lube H oil
MB5700
gas flow
flow
flow
3-ph, 50/60 Hz, variable speed drive, horizontal
gas flow
3-ph, 50/60 Hz, variable speed drive, vertical
gas flow
508 kg / 1118 lbs
1712 (67.40)
490 (19.29)
471 (18.54)
230
ISO200
(9.06)
2
PAGE
120
TECHNICAL DATA
ISO200
ORDERING NUMBER
A310-23-985
A310-24-985
A310-23-970
A310-24-970
A310-23-935
A310-23-936
A310-24-935
A310-24-936
A310-27-935
A310-28-935
N EW
607 DIRECT DRIVE BOOSTER PUMPS
607 BARE SHAFT BOOSTER PUMPS
TECHNICAL DATA
TECHNICAL DATA
Displacement
Rotational speed
Inlet connection
Outlet connection
Water cooling
Maximum temperature rise
Weight
Oil capacity
60 Hz
*
800
607
700
PAGE
121
1360
800
1190
700
1020
600
850
500
1360
607
1190
1
1020
850
2
400
680
300
510
300
510
200
340
200
340
170
100
170
100
0
0
0
10
-4
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
0
10
-4
With 300 ft3min-1 backing pump
2
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
Blower speeds: Top curve 2750 rpm; Bottom curve 1800 rpm.
1
2
PRODUCT DESCRIPTION
10
torr (mm Hg)
torr (mm Hg)
1
m 3 h -1
680
ft 3 min -1
2
m 3 h -1
500
400
2
1615 m3h-1 / 950 ft3min-1*
2750 rpm*
153 mm / 6 in
153 mm / 6 in
1.8 l min-1 / 0.5 US gal min-1
495 mbar / 380 Torr
135 °C / 275 °F
191 °C / 375 °F
215 kg / 475 lb
3.28 liter / 6.90 pint
Maximum
1
600
ft 3 min -1
*
1020 m3h-1 / 600 ft3min-1*
1800 rpm*
153 mm / 6 in
153 mm / 6 in
495 mbar / 380 Torr
135 °C / 275 °F
191 °C / 375 °F
273 kg / 600 lb
ORDERING NUMBER
PRODUCT DESCRIPTION
ORDERING NUMBER
Displacement
Rotational speed
Inlet connection
Outlet connection
Water cooling
Weight
Oil capacity
NEW
TECHNICAL DATA
TECHNICAL DATA
Displacement
Rotational speed
Inlet connection
Outlet connection
Water cooling
Weight
Oil capacity
2210 m3h-1 / 1300 ft3min-1*
1800 rpm*
203 mm / 8 in
203 mm / 8 in
495 mbar / 380 Torr
135 °C / 275 °F
191 °C / 375 °F
321 kg / 705 lb
Displacement
Rotational speed
Inlet connection
Outlet connection
Water cooling
Weight
Oil capacity
60 Hz
*
2000
3400 m3h-1 / 2000 ft3min-1*
2750 rpm*
203 mm / 8 in
203 mm / 8 in
495 mbar / 380 Torr
135 °C / 275 °F
191 °C / 375 °F
234 kg / 515 lb
Maximum
2000
3400
3400
615
2
1600
1600
2720
2720
1
1
2040
800
1360
400
680
0
ft 3 min -1
1200
1200
2040
800
1360
400
680
0
0
-4
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
0
10
-4
1
2
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
1
3
2
PRODUCT DESCRIPTION
10
torr (mm Hg)
torr (mm Hg)
3
m 3 h -1
3
3
10
615
2
m 3 h -1
*
ft 3 min -1
2
PAGE
122
ORDERING NUMBER
PRODUCT DESCRIPTION
ORDERING NUMBER
N EW
BOC EDWARDS STOKES VACUUM 615
BYPASS DIRECT DRIVE BOOSTER PUMPS
BOC EDWARDS STOKES VACUUM 615
BYPASS BARE SHAFT BOOSTER PUMPS
TECHNICAL DATA
TECHNICAL DATA
60 Hz
*
2000
3400
1
2000
3400
615BP
1
2
2550
2
1500
500
850
0
1000
1700
500
850
0
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
0
3
0
10
-4
10
-3
10
-2
torr (mm Hg)
-1
10
0
10
1
10
2
10
3
Blower speeds 2750 rpm.
2
PRODUCT DESCRIPTION
10
torr (mm Hg)
Blower speed: 2750 rpm.
1
m 3 h -1
1700
ft 3 min -1
1000
-4
2550
3
m 3 h -1
3
10
PAGE
123
Maximum
615BP
1500
ft 3 min -1
*
2
3400 m3h-1 / 2000 ft3min-1*
2750 rpm*
203 mm / 8 in
203 mm / 8 in
135 °C / 275 °F
191 °C / 375 °F
284 kg / 625 lb
Displacement
Rotational speed
Inlet connection
Outlet connection
Water cooling
Weight
Oil capacity
1
2
ORDERING NUMBER
PRODUCT DESCRIPTION
ORDERING NUMBER
1300 m3h-1 / 2210 ft3min-1*
1800 rpm*
203 mm / 8 in
203 mm / 8 in
135 °C / 275 °F
191 °C / 375 °F
321 kg / 705 lb
Displacement
Rotational speed
Inlet connection
Outlet connection
Water cooling
Weight
Oil capacity
NEW
TECHNICAL DATA
TECHNICAL DATA
Displacement
Rotational speed
Inlet connection
Outlet connection
Water cooling
Weight
Oil capacity
60 Hz
*
3000
3000
5100
2500
4250
1500
2550
170
1000
170
850
500
850
2550
1000
500
ft 3 min -1
3400
1500
0
0
0
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
2
2000
3400
-4
4250
1
2
2000
10
5100
622
2500
1
3
0
10
-4
10
-3
10
-2
-1
10
0
10
1
10
2
10
3
2
1
2
PRODUCT DESCRIPTION
10
torr (mm Hg)
torr (mm Hg)
1
5100 m3h-1 / 3000 ft3min-1*
2750 rpm*
203 mm / 8 in
203 mm / 8 in
325 mbar / 250 Torr
121 °C / 250 °F
177 °C / 350 °F
335 kg / 740 lb
Maximum
622
m 3 h -1
*
3400 m3h-1 / 2000 ft3min-1*
1800 rpm*
203 mm / 8 in
203 mm / 8 in
325 mbar / 250 Torr
121 °C / 250 °F
177 °C / 350 °F
485 kg / 1065 lb
m 3 h -1
Displacement
Rotational speed
Inlet connection
Outlet connection
Water cooling
Weight
Oil capacity
ft 3 min -1
2
PAGE
124
ORDERING NUMBER
PRODUCT DESCRIPTION
ORDERING NUMBER
840 (33.07)
1347 (53.03)
40 mbar / 30 Torr
33 mbar / 25 Torr
GV400 / DP400 and EH2600
400 V 50 Hz 3-ph
or 460 V 60 Hz 3-ph
18.5 kW / 24.8 hp
22 kW / 29.5 hp
Motor power 50 Hz
Motor power 60 Hz
Cooling-water supply
Maximum pressure
Inlet temperature
Recommended oil
Oil capacity
Ambient operating temperature
Weight
4 x Ø27 (1.06)
290
290
(11.42)
(11.42)
435
435
(17.13)
(17.13)
Ø350
(13.78)
10 bar / 145 psi
20 ºC
Ultragrade 20
20 l / 21.1 qt
5 - 40 ºC
100% RH
1250 kg / 2756 lb
310
(12.20)
415
2
(16.34)
400
11200 m3h-1 / 6600 ft3min-1
13400 m3h-1 / 7900 ft3min-1
ISO160
12 x Ø22 (0.87)
x Ø445 (17.52)
310
(12.20)
Dimensions are for pumps with 50 Hz motors.
Contact BOC Edwards for dimensions of pumps with 60 Hz motors.
10
m 3 h -1
10
10
5
4
3
HV11000 + GV400 / DP400 + EH2600
10
10
2
1
HV11000, 50Hz
0
10
-4
10
10
-2
10
-3
-1
10
-2
10
0
-1
1
10
0
2
10
1
10
3
10
10
10
10
10
10
This data was measured from the HV pump fitted with an inverter.
2
10
4
10
3
mbar
5
Pa
Contact BOC Edwards for details of pumps without an inverter.
10
ft 3 min -1
10
10
5
4
3
HV11000 + GV400 / DP400 + EH2600
10
10
2
1
HV11000, 60Hz
0
10
-4
10
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
Torr
PAGE
125
Displacement
50 Hz supply
60 Hz supply
50 Hz
60 Hz
Electrical supply
390
TECHNICAL DATA
(15.35)
714 (28.11)
(15.75)
HV11000 HIGH CAPACITY MECHANICAL
BOOSTER PUMP
1547 (60.91)
840 (33.07)
34 mbar / 26 Torr
28 mbar / 21 Torr
GV400 / DP400 and EH4200
400 V 50 Hz 3-ph
or 460 V 60 Hz 3-ph
18.5 kW / 24.8 hp
22 kW / 29.5 hp
Motor power 50 Hz
Motor power 60 Hz
Maximum pressure
Inlet temperature
Recommended oil
Oil capacity
Weight (without motor)
4 x Ø27 (1.06)
390
390
(15.35)
(15.35)
435
(17.13)
Ø400
(15.75)
415
(16.34)
14100 m3h-1 / 8300 ft3min-1
16900 m3h-1 / 10000 ft3min-1
390
Displacement
50 Hz supply
60 Hz supply
50 Hz
60 Hz
Electrical supply
ISO200
435
(17.13)
10 bar / 145 psi
20 ºC
Ultragrade 20
20 l / 21.1 qt
5 - 40 ºC
100% RH
1945 kg / 4530 lb
310
310
(12.20)
(12.20)
16 x Ø22 (0.87)
x Ø495 (19.49)
10
m 3 h -1
10
10
5
4
3
HV14000 + GV400 / DP400 + EH4200
10
10
2
1
HV14000, 50Hz
0
10
-4
10
10
-2
10
10
-3
-1
10
10
-2
0
10
10
-1
1
10
10
0
2
10
10
1
3
10
10
2
4
10
10
3
5
mbar
Pa
10
10
ft 3 min -1
2
PAGE
126
(15.35)
TECHNICAL DATA
400
814 (32.05)
(15.75)
BOOSTER PUMP
10
5
4
3
HV14000 + GV400 / DP400 + EH4200
10
10
2
1
HV14000, 60Hz
0
10
-4
10
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
Torr
BOOSTER PUMP
870 (34.25)
1942 (76.46)
1036 (40.79)
29 mbar / 22 Torr
24 mbar / 18 Torr
2 x GV400 / DP400 and
2 x EH4200
400 V 50 Hz 3-ph
or 460 V 60 Hz 3-ph
30 kW / 40.2 hp
#
Electrical supply
Motor power 50 Hz
Motor power 60 Hz
Maximum pressure
Inlet temperature
Recommended oil
Oil capacity
Weight (without motor)
4 x Ø27 (1.06)
490
490
(19.29)
(19.29)
540
540
(21.26)
(21.26)
Ø19.68
(500)
10 bar / 145 psi
20 ºC
Ultragrade 20
33 l / 34.9 qt
5 - 40 ºC
100% RH
3100 kg / 6820 lb
390
(15.35)
2
515
(20.28)
500
30000 m3h-1 / 17700 ft3min-1
36000 m3h-1 / 21204 ft3min-1
ISO250
20 x Ø22 (0.87)
x Ø600 (23.62)
390
(15.35)
# On request
10
m 3 h -1
10
10
5
4
3
HV30000 + 2 x GV400 / DP400 + 2 x EH4200
10
10
2
1
HV30000, 50Hz
0
10
-4
10
10
-2
10
10
-3
-1
10
10
-2
10
0
10
-1
1
10
10
0
2
10
10
1
3
10
10
2
10
4
10
3
mbar
5
Pa
10
ft 3 min -1
10
10
5
4
3
HV30000 + 2 x GV400 / DP400 + 2 x EH4200
10
10
2
1
HV30000, 60Hz
0
10
-4
10
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
3
Torr
PAGE
127
Displacement
50 Hz supply
60 Hz supply
50 Hz
60 Hz
(19.68)
490
(19.29)
TECHNICAL DATA
NEW
MULTISTAGE VACUUM SYSTEMS
2
PAGE
128
BOC Edwards Stokes Vacuum Multi-stage vacuum pumping systems are
available in three options, all consisting of a BOC Edwards Stokes Vacuum
piston pump with a BOC Edwards Stokes Vacuum direct drive booster. A
full range of accessories is available for these systems, please discuss with
your BOC Edwards representative for more information.
Series 1800
These systems are based on BOC Edwards Stokes Vacuum piston pumps
with BOC Edwards Stokes Vacuum seal-less boosters. These feature
canned motors and are close coupled to the piston pump. Control options
are available.
Series MB
These are BOC Edwards Stokes Vacuum piston pumps with a direct drive
BOC Edwards Stokes Vacuum vacuum booster, a pressure switch is
included with controls as an option. MB systems with a booster have a
bypass valve operate from atmosphere without the need for a pressure
switch.
Series 1700
These are generally higher capacity combinations, based on BOC Edwards
Stokes Vacuum piston pumps with belt driven horizontal flow BOC
Edwards Stokes Vacuum superblowers. Variants with Process isolation
boosters are available. Controls for 1700 series machines include a pressure switch, motor starters and overloads.
N EW
SERIES MB
TECHNICAL DATA 412MBX
*
1040 m3h-1 / 612 ft3min-1*
510 m3h-1 / 300 ft3min-1*
No
N/A Torr
15 kW / 20 hp
7.5 kW / 10 hp
152 mm / 6 in
3FLG / 3NPT in
11.4 l min-1 / 3 US gal min-1
45.4 liter / 12 US gal
1040 m3h-1 / 612 ft3min-1*
510 m3h-1 / 300 ft3min-1*
No
N/A Torr
15 kW / 20 hp
- kW / - hp
152 mm / 6 in
102 mm / 4NPT in
45.4 liter / 12 US gal
1314 mm / 51.75 in
1132 mm / 44.56 in
1194 mm / 47 in
1414 mm / 55.69 in
1202 kg / 2650 lb
1434 mm / 56.44 in
1434 mm / 56.44 in
1181 mm / 46.5 in
1022 mm / 40.25 in
1452 kg / 3200 lb
60 Hz
1
612MB & 412MBX
PRODUCT DESCRIPTION
ORDERING NUMBER
2
PAGE
129
Blower displacement
Pump displacement
Pressure switch required
Normal cut-in pressure
Blower drive
Microvac drive
Flanged inlet connection
Pipe outlet connection
Maximum water consumption
Blower oil requirements
Microvac oil requirements
Height
Overall
To inlet
Length
Width
Net weight
612MBX
NEW
SERIES 1800
TECHNICAL DATA 1836
2
PAGE
130
Blower displacement
Pump displacement
Continuous operation pressure limit
Blower drive
Microvac drive
Height
Overall
To inlet
Length
Width
Net weight
*
1821
1822
1040 m3h-1 / 612 ft3min-1*
255 m3h-1 / 150 ft3min-1*
Yes
25 Torr
8 Torr
7.5 kW / 10 hp
5.6 kW / 7.5 hp
152 mm / 6 in
2FLG / 2NPT in
13.3 l min-1 / 3.5 US gal min-1
15 liter / 4 US gal
2209 m3h-1 / 1300 ft3min-1*
255 m3h-1 / 150 ft3min-1*
Yes
15 Torr
3 Torr
7.5 kW / 10 hp
5.6 kW / 7.5 hp
203 mm / 8 in
2FLG / 2NPT in
13.3 l min-1 / 3.5 US gal min-1
15 liter / 4 US gal
2209 m3h-1 / 1300 ft3min-1*
510 m3h-1 / 300 ft3min-1*
Yes
25 Torr
15 Torr
7.5 kW / 10 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3NPT in
1105 mm / 43.5 in
1070 mm / 42.12 in
1206 mm / 47.5 in
876 mm / 34.5 in
715 kg / 1575 lb
1105 mm / 43.5 in
1070 mm / 42.12 in
1308 mm / 51.5 in
1070 mm / 42.12 in
770 kg / 1700 lb
1289 mm / 50.75 in
1133 mm / 44.62 in
1384 mm / 54.5 in
1102 mm / 43.38 in
1225 kg / 2700 lb
60 Hz
1
1822 25 Torr cut-in pressure
3
2
PRODUCT DESCRIPTION
ORDERING NUMBER
N EW
SERIES 1800 BYPASS
TECHNICAL DATA 1822BP
*
1839HCBP
1839HDBP
2209 m3h-1 / 1300 ft3min-1*
510 m3h-1 / 300 ft3min-1*
No
N/A Torr
15 Torr
7.5 kW / 10 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3NPT in
4418 m3h-1 / 2600 ft3min-1*
510 m3h-1 / 300 ft3min-1*
No
N/A Torr
2 Torr
15 kW / 20 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3NPT in
4418 m3h-1 / 2600 ft3min-1*
1020 m3h-1 / 600 ft3min-1*
No
N/A Torr
3 Torr
15 kW / 20 hp
2@7.5 kW / 2@10 hp
203 mm / 8 in
3FLG / 3NPT (2) in
4418 m3h-1 / 2600 ft3min-1
1240 m3h-1 / 730 ft3min-1
No
25 Torr
4 Torr
15 kW / 20 hp
22.4 kW / 30 hp
203 mm / 8 in
127 mm / 5FLG in
1289 mm / 50.75 in
1133 mm / 44.62 in
1390 mm / 54.75 in
1102 mm / 43.38 in
1262 kg / 2780 lb
1289 mm / 50.75 in
1133 mm / 44.62 in
1390 mm / 54.75 in
1102 mm / 43.38 in
1267 kg / 2790 lb
1413 mm / 55.62 in
1289 mm / 50.75 in
2286 mm / 90 in
1270 mm / 50 in
2306 kg / 5080 lb
1683 mm / 66.25 in
1251 mm / 49.25 in
1867 mm / 73.5 in
1311 mm / 51.62 in
2915 kg / 6420 lb
60 Hz
1
1839HDBP
2
1839HCBP
3
1839BP
4
1822BP
PRODUCT DESCRIPTION
ORDERING NUMBER
2
PAGE
131
Blower displacement
Pump displacement
Blower drive
Microvac drive
Height
Overall
To inlet
Length
Width
Net weight
1839BP
NEW
SERIES 1800
TECHNICAL DATA 1833
2
PAGE
132
Blower displacement
Pump displacement
Blower drive
Microvac drive
Height
Overall
To inlet
Length
Width
Net weight
*
1833HC
1833HD
6528 m3h-1 / 3840 ft3min-1*
510 m3h-1 / 300 ft3min-1*
Yes
5 Torr
0.6 Torr
15 kW / 20 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3NPT in
6528 m3h-1 / 3840 ft3min-1*
1020 m3h-1 / 600 ft3min-1*
Yes
10 Torr
1 Torr
15 kW / 20 hp
2@7.5 kW / 2@10 hp
203 mm / 8 in
3FLG / 3NPT (2) in
6528 m3h-1 / 3840 ft3min-1*
1240 m3h-1 / 730 ft3min-1*
Yes
15 Torr
1.5 Torr
15 kW / 20 hp
22.4 kW / 30 hp
203 mm / 8 in
127 mm / 5FLG in
1289 mm / 50.75 in
1164 mm / 45.81 in
1384 mm / 54.5 in
1208 mm / 47.56 in
1330 kg / 2930 lb
1413 mm / 55.62 in
1321 mm / 52 in
2286 mm / 90 in
1346 mm / 53 in
2406 kg / 5300 lb
1683 mm / 66.25 in
1283 mm / 50.5 in
1867 mm / 73.5 in
1381 mm / 54.38 in
3009 kg / 6625 lb
60 Hz
1
1833HD 15 Torr cut-in pressure
3
2
1833HC 10 Torr cut-in pressure
PRODUCT DESCRIPTION
ORDERING NUMBER
N EW
SERIES 1800
TECHNICAL DATA 1839
*
1839HD
4418 m3h-1 / 2600 ft3min-1*
510 m3h-1 / 300 ft3min-1*
Yes
15 Torr
2 Torr
15 kW / 20 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3NPT in
4418 m3h-1 / 2600 ft3min-1*
1020 m3h-1 / 600 ft3min-1*
Yes
20 Torr
3 Torr
15 kW / 20 hp
2@7.5 kW / 2@10 hp
203 mm / 8 in
3FLG / 3NPT (2) in
4418 m3h-1 / 2600 ft3min-1*
1240 m3h-1 / 730 ft3min-1*
Yes
25 Torr
4 Torr
15 kW / 20 hp
22.4 kW / 30 hp
203 mm / 8 in
127 mm / 5FLG in
1289 mm / 50.75 in
1133 mm / 44.62 in
1384 mm / 54.5 in
1102 mm / 43.38 in
1230 kg / 2710 lb
1413 mm / 55.62 in
1289 mm / 50.75 in
2286 mm / 90 in
1270 mm / 50 in
2270 kg / 5000 lb
1683 mm / 66.25 in
1251 mm / 49.25 in
1867 mm / 73.5 in
1311 mm / 51.62 in
2915 kg / 6420 lb
60 Hz
1
3
2
PRODUCT DESCRIPTION
ORDERING NUMBER
2
PAGE
133
Blower displacement
Pump displacement
Blower drive
Microvac drive
Height
Overall
To inlet
Length
Width
Net weight
1839HC
NEW
SERIES 1700
TECHNICAL DATA 1721
2
PAGE
134
Blower displacement
Pump displacement
Blower drive
Microvac drive
Height
Overall
To inlet
Length
Width
Net weight
*
1721S
1722
1722S
2209 m3h-1 / 1300 ft3min-1*
255 m3h-1 / 150 ft3min-1*
Yes
15 Torr
3 Torr
5.6 kW / 7.5 hp
5.6 kW / 7.5 hp
203 mm / 8 in
51 mm / 2FLG in
15 liter / 4 US gal
2781 m3h-1 / 1600 ft3min-1*
255 m3h-1 / 150 ft3min-1*
Yes
10 Torr
2 Torr
7.5 kW / 10 hp
5.6 kW / 7.5 hp
203 mm / 8 in
51 mm / 2FLG in
15 liter / 4 US gal
2209 m3h-1 / 1300 ft3min-1*
510 m3h-1 / 300 ft3min-1*
Yes
25 Torr
15 Torr
5.6 kW / 7.5 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3 NPT in
2781 m3h-1 / 1600 ft3min-1*
510 m3h-1 / 300 ft3min-1*
Yes
15 Torr
8 Torr
7.5 kW / 10 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3 NPT in
1260 mm / 49.63 in
1035 mm / 40.75 in
1419 mm / 55.88 in
919 mm / 36.19 in
1225 kg / 2700 lb
1260 mm / 49.63 in
1035 mm / 40.75 in
1419 mm / 55.88 in
919 mm / 36.19 in
1270 kg / 2800 lb
1438 mm / 56.63 in
1035 mm / 40.75 in
1407 mm / 55.38 in
1048 mm / 41.25 in
1588 kg / 3500 lb
1438 mm / 56.63 in
1035 mm / 40.75 in
1407 mm / 55.38 in
1048 mm / 41.25 in
1633 kg / 3600 lb
60 Hz
1
1722S 15 Torr cut-in pressure
2
1721S 10 Torr cut-in pressure
3
4
PRODUCT DESCRIPTION
ORDERING NUMBER
N EW
SERIES 1700
TECHNICAL DATA 1738
*
1738HD
3398 m3h-1 / 2000 ft3min-1*
150 m3h-1 / 300 ft3min-1*
Yes
10 Torr
3 Torr
7.5 kW / 10 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3 NPT in
3398 m3h-1 / 2000 ft3min-1*
1200 m3h-1 / 600 ft3min-1*
Yes
25 Torr
5 Torr
7.5 kW / 10 hp
2@7.5 kW / 2@10 hp
203 mm / 8 in
3FLG / 3 NPT (2) in
3398 m3h-1 / 2000 ft3min-1*
1240 m3h-1 / 730 ft3min-*
Yes
40 Torr
12 Torr
11.2 kW / 15 hp
22.4 kW / 30 hp
203 mm / 8 in
127 mm / 5FLG in
1438 mm / 56.63 in
1035 mm / 40.75 in
1407 mm / 55.38 in
1048 mm / 41.25 in
1633 kg / 3600 lb
1438 mm / 56.63 in
1035 mm / 40.75 in
1800 mm / 70.88 in
1778 mm / 70 in
2404 kg / 5300 lb
1689 mm / 66.5 in
1035 mm / 40.75 in
1981 mm / 78 in
1295 mm / 51 in
3187 kg / 7025 lb
60 Hz
1
3
2
PRODUCT DESCRIPTION
ORDERING NUMBER
2
PAGE
135
Blower displacement
Pump displacement
Blower drive
Microvac drive
Height
Overall
To inlet
Length
Width
Net weight
1738HC
NEW
SERIES 1700
2
PAGE
136
Blower displacement
Pump displacement
Blower drive
Microvac drive
Height
Overall
To inlet
Length
Width
Net weight
*
1738HCBP
1738HDBP
3398 m3h-1 / 2000 ft3min-1*
510 m3h-1 / 300 ft3min-1*
No
N/A Torr
3 Torr
11.2 kW / 15 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3 NPT in
3398 m3h-1 / 2000 ft3min-1*
1200 m3h-1 / 600 ft3min-1*
No
N/A Torr
5 Torr
11.2 kW / 15 hp
2@7.5 kW / 2@10 hp
203 mm / 8 in
3FLG / 3 NPT (2) in
3398 m3h-1 / 2000 ft3min-1*
1240 m3h-1 / 730 ft3min-1*
No
N/A Torr
12 Torr
11.2 kW / 15 hp
22.4 kW / 30 hp
203 mm / 8 in
127 mm / 5FLG in
1499 mm / 59 in
1035 mm / 40.75 in
1416 mm / 55.75 in
1038 mm / 40.88 in
1690 kg / 3725 lb
1499 mm / 59 in
1035 mm / 40.75 in
1800 mm / 70.88 in
1778 mm / 70 in
2449 kg / 5400 lb
1689 mm / 66.5 in
1035 mm / 40.75 in
1981 mm / 78 in
1295 mm / 51 in
3221 kg / 7100 lb
60 Hz
1
1738HDBP
3
1738 BP
2
1738HCBP
PRODUCT DESCRIPTION
ORDERING NUMBER
N EW
SERIES 1700
TECHNICAL DATA 1739
*
1739HD
4418 m3h-1 / 2600 ft3min-1*
510 m3h-1 / 300 ft3min-1*
Yes
15 Torr
2 Torr
22.4 kW / 30 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3 NPT in
4418 m3h-1 / 2600 ft3min-1*
1020 m3h-1 / 600 ft3min-1*
Yes
20 Torr
3 Torr
18.6 kW / 25 hp
2@7.5 kW / 2@10 hp
203 mm / 8 in
3FLG / 3 NPT (2) in
4418 m3h-1 / 2600 ft3min-1*
1240 m3h-1 / 730 ft3min-1*
Yes
25 Torr
4 Torr
18.6 kW / 25 hp
22.4 kW / 30 hp
203 mm / 8 in
127 mm / 5FLG in
1318 mm / 51.88 in
1067 mm / 42 in
1905 mm / 75 in
1270 mm / 50 in
1803 kg / 3975 lb
1410 mm / 55.5 in
1067 mm / 42 in
2134 mm / 84 in
1778 mm / 70 in
2733 kg / 6025 lb
1683 mm / 66.25 in
1067 mm / 42 in
2388 mm / 94 in
1651 mm / 65 in
3504 kg / 7725 lb
60 Hz
1
3
2
PRODUCT DESCRIPTION
ORDERING NUMBER
2
PAGE
137
Blower displacement
Pump displacement
Blower drive
Microvac drive
Height
Overall
To inlet
Length
Width
Net weight
1739HC
NEW
SERIES 1700
2
PAGE
138
Blower displacement
Pump displacement
Blower drive
Microvac drive
Height
Overall
To inlet
Length
Width
Net weight
*
1739HCBP
1739HDBP
4418 m3h-1 / 2600 ft3min-1*
510 m3h-1 / 300 ft3min-1*
No
N/A Torr
2 Torr
22.4 kW / 30 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3 NPT in
4418 m3h-1 / 2600 ft3min-1*
1020 m3h-1 / 600 ft3min-1*
No
N/A Torr
3 Torr
18.6 kW / 25 hp
2@7.5 kW / 2@10 hp
203 mm / 8 in
3FLG / 3 NPT (2) in
4418 m3h-1 / 2600 ft3min-1*
1240 m3h-1 / 730 ft3min-1*
No
N/A Torr
4 Torr
18.6 kW / 25 hp
22.4 kW / 30 hp
203 mm / 8 in
127 mm / 5FLG in
1530 mm / 60.25 in
1067 mm / 42 in
1905 mm / 75 in
1270 mm / 50 in
1837 kg / 4050 lb
1530 mm / 60.25 in
1067 mm / 42 in
2134 mm / 84 in
1778 mm / 70 in
2767 kg / 6100 lb
1683 mm / 66.25 in
1067 mm / 42 in
2388 mm / 94 in
1651 mm / 65 in
3538 kg / 7800 lb
60 Hz
1
1739HDBP
3
1739BP
2
1739HCBP
PRODUCT DESCRIPTION
ORDERING NUMBER
N EW
SERIES 1700
TECHNICAL DATA 1754
*
5100 m3h-1 / 3000 ft3min-1*
510 m3h-1 / 300 ft3min-1*
Yes
15 Torr
1 Torr
15 kW / 20 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3 NPT in
5100 m3h-1 / 3000 ft3min-1*
1020 m3h-1 / 600 ft3min-1*
Yes
30 Torr
3 Torr
18.6 kW / 25 hp
2@7.5 kW / 2@10 hp
203 mm / 8 in
3FLG / 3 NPT (2) in
1470 mm / 57.88 in
1067 mm / 42 in
1695 mm / 66.75 in
1111 mm / 43.75 in
1678 kg / 3700 lb
1438 mm / 56.63 in
1067 mm / 42 in
2134 mm / 84 in
1778 mm / 70 in
2722 kg / 6000 lb
60 Hz
1
2
PRODUCT DESCRIPTION
ORDERING NUMBER
2
PAGE
139
Blower displacement
Pump displacement
Blower drive
Microvac drive
Height
Overall
To inlet
Length
Width
Net weight
1754HC
NEW
SERIES 1700
TECHNICAL DATA 1733
2
PAGE
140
Blower displacement
Pump displacement
Blower drive
Microvac drive
Height
Overall
To inlet
Length
Width
Net weight
*
1733HC
1733HD
6528 m3h-1 / 3840 ft3min-1*
510 m3h-1 / 300 ft3min-1*
Yes
5 Torr
0.6 Torr
18.6 kW / 25 hp
7.5 kW / 10 hp
203 mm / 8 in
3FLG / 3 NPT in
6528 m3h-1 / 3840 ft3min-1*
1020 m3h-1 / 600 ft3min-1*
Yes
10 Torr
1 Torr
22.4 kW / 30 hp
2@7.5 kW / 2@10 hp
203 mm / 8 in
3FLG / 3 NPT (2) in
6528 m3h-1 / 3840 ft3min-1*
1240 m3h-1 / 730 ft3min-1*
Yes
15 Torr
1.5 Torr
22.4 kW / 30 hp
22.4 kW / 30 hp
203 mm / 8 in
127 mm / 5FLG in
1438 mm / 56.63 in
1067 mm / 42 in
1695 mm / 66.75 in
1111 mm / 43.75 in
1710 kg / 3770 lb
1438 mm / 56.63 in
1067 mm / 42 in
2134 mm / 84 in
1778 mm / 70 in
2767 kg / 6100 lb
1683 mm / 66.25 in
1067 mm / 42 in
2299 mm / 90.5 in
1283 mm / 50.5 in
3538 kg / 7800 lb
60 Hz
1
3
2
PRODUCT DESCRIPTION
ORDERING NUMBER

hick hargreaves

Transcription

Similar documents

TROCKENLAUFENDE SCROLL-PUMPEN DER BAUREIHE nXDS

Untitled - Redneck Trailer Supplies

4 - SEW-EURODRIVE