Attachment Directory – AESG216-00

Transcription

Attachment Directory – AESG216-00
ALLIED
MANUFACTURER
ATTACHMENT DIRECTORY
INTRODUCTION
This directory contains a listing of attachments manufactured by allied
equipment manufacturers which may be used on Komatsu construction
equipment. Several attachments listed in this directory are also included
in the Komatsu Machine Price List or the Allied Manufacturers
Attachment supplement to that price list and can be purchased through
Komatsu America International Company. Floor planning and financing
are available through Komatsu for attachments purchased from those
price lists. Consult the Komatsu Machine Price List or the Allied
Manufacturers Attachment supplement for attachment sizes available for
specific Komatsu models.
The sole purpose of this directory is to provide a reference source of the
various attachments available and the manufacturers who produce them.
The listing of an attachment does not imply approval by Komatsu nor
does it suggest the size or model of tool for each Komatsu machine.
Retail customers and dealers should contact the allied equipment manufacturer with questions concerning the proper match of attachment and
Komatsu machine for each application. Questions concerning availability,
pricing and installation should also be directed to the attachment manufacturer. Technical information that is required for applications or installations, that is not available through the procedures listed above, can be
directed to Komatsu America International Company through the allied
attachment manufacturer.
STATEMENT OF LIMITATION AND DISCLAIMER OF RESPONSIBILITY
The attachments listed in this directory have not been designed, tested,
or manufactured by Komatsu Ltd. or Komatsu America International
Company and these companies assume no responsibility for their performance. The attachment manufacturer and/or selling dealer are solely
responsible for any failure, personal injury, or property damage caused
by the use of this equipment.
As mentioned previously, several attachments listed in this guide are
also included in the Komatsu Machine Price List or the Allied
Manufacturers Attachment supplement to that price list. In these cases
the normal machine warranty applies to the Komatsu product while the
allied manufacturer’s warranty applies to their product.
The allied attachment information was supplied by the attachment manufacturers and its accuracy was not verified by Komatsu Ltd. or Komatsu
America International Company but merely provided for the convenience
of its dealers and customers as a general depiction and description of
the attachment and its usage. The actual attachment may vary from the
information included in this directory, check with the manufacturer for the
latest specifications.
TABLE OF CONTENTS
Attachment Type
Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Leveler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Asphalt Cutter . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Lubrication System . . . . . . . . . . . . . . . . . . . . . . .43
Auger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Magnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Backhoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Pile Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Bale Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Plows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Barrel Handler . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Precleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9
Quick Fill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Brush Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Rake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45-47
Bucket
Ride Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Excavator . . . . . . . . . . . . . . . . . . . . . . . .10-16
Ripper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47-49
Loader . . . . . . . . . . . . . . . . . . . . . . . . . . .17-23
Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Shear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Snowblower . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Compactor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Snow Plow . . . . . . . . . . . . . . . . . . . . . . . . . . .51-53
Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Spade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Controls/Instrumentation . . . . . . . . . . . . . . . . . . .25
Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Starting Aids . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Sweeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-28
Tire
Custom Modifications . . . . . . . . . . . . . . . . . . . . .28
Track Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Cutting Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Undercarriage . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Delimber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Emission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Winch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Fairlead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Feller Buncher . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Fire Suppression . . . . . . . . . . . . . . . . . . . . . . . . .31
Fork
Fork Log and Lumber . . . . . . . . . . . . . . .31-32
Millyard . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-36
Grade Control . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Grapple . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36-41
Guarding Package . . . . . . . . . . . . . . . . . . . . . . . .41
Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Harvester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Hydraulic Kits . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Manufacturer Index . . . . . . . . . . . . . . . . . . .56-86
ATTACHMENT TYPE
ARM
EXTENDIBLE
Hydraulically actuated variable length arm. Provides more
reach and lift height.
HE
Digmor California
EXTENSION
Mounted on arm to extend length. Provides more reach and lift
height.
HE
Paul Wever Construction Equipment Co., Inc.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
ROTATING
Arm can be hydraulically rotated continuously. Use with bucket, shear, grapple, etc. to eliminate the need for individual
rotators.
HE
Pemberton, Inc.
ASPHALT CUTTER
BUCKET MOUNTED
Sharp-edge disk wheel clamps to bucket. Sharp disk cuts
asphalt with downpressure supplied by the machine. Some
units attach to an excavator quick coupler.
HE, WL
Allied Construction Products, Inc.
Attachments International, Inc.
Guest Industries, Inc.
Industrial Machinery Attachment Co. (IMAC)
Rockland Manufacturing Co.
2
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
ASPHALT CUTTER (continued)
MOLDBOARD MOUNTED
Sharp-edge disk wheel mounts on a dozer or motor grader
blade. Sharp disk cuts asphalt with downpressure supplied by
the machine.
CD, MG
Allied Construction Products, Inc.
Attachments International, Inc.
RIPPER/SCARIFIER MOUNTED
Sharp-edged disk wheel mounts in place of ripper or scarifier
shank. Disk scores asphalt pavement to control the ripping
area.
CD, MG
Ateco
Attachments International, Inc.
Guest Industries, Inc.
AUGER
HYDRAULIC
Used for drilling holes in soil. Used in applications such as
landscaping, fence post, sign post, and utility pole installation.
CD, HE, WL
Eskridge, Inc.
Lowe Manufacturing Co., Inc.
McMillen Construction Equipment Attachments
BACKHOE
HYDRAULIC
The backhoe mounts to the rear of the machine. Used for digging deep and narrow trenches. The arm swings for loading and
digging.
CD, WL
Ware Machine Works, Inc.
3
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BALE CLAMP
HYDRAULIC
Fork for handling large rectangular hay bales. Long tapered
spikes enter and exit bales easily. Equipped with clamps to
secure bale to fork.
WL
New Dymax, Inc.
BARREL HANDLER
EXCAVATOR
Hydraulically operated rotatable barrel handler. Good for
waste handling applications.
HE
Ajusta-Buckets, Division of QCON
LaBounty Manufacturing
Pemberton, Inc.
LOADER MOUNTED
Use with forks to grab onto and handle various size barrels.
Manual and or hydraulic available. Single or double barrel handler versions available.
WL
ACS Industries, Inc.
Industrial Machinery Attachment Co. (IMAC)
Weldco-Beales Manufacturing Ltd.
4
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BLADE
BACKFILL
Used in place of bucket for backfilling and grading.
HE
Ajusta-Buckets, Division of QCON
Bateman Manufacturing
Craig Manufacturing Ltd.
Geith, Inc.
Guest Industries, Inc.
Industrial Machinery Attachment Co. (IMAC)
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
BANK SLOPER
Used for trimming or sloping ditches and steep banks. Blade
is mounted on or near the moldboard of blade to push /grade
material on a slope.
CD, MG
Ateco
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
COAL
The ends of the blade are angled forward, and the length and
height of the blade are increased in order to increase the carrying capacity in lighter materials, such as coal.
CD, WL
Bateman Manufacturing
Industrial Machinery Attachment Co. (IMAC)
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Young Corporation
LAND CLEARING
Purpose built with angled double beveled or serrated edge for
shearing off trees and stumps at ground level. Includes a built
in splitter to split large trees that cannot be sheared in a single pass. Available as a straight or V blade.
CD, WL
JRB Company, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
5
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BLADE (continued)
LANDFILL
The ends of the blade are angled forward and the moldboard
height is increased with screening in order to increase the
carrying capacity for spreading trash in a sanitary land fill.
CD
Bateman Manufacturing
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Young Corporation
LOADER
Dozer style blade used to backfill or grade. Usually available
in straight, angling or 6-way tilt versions.
WL
ACS Industries, Inc.
Geith, Inc.
Henke Manufacturing Corporation
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Pemberton, Inc.
Rylind Industries, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Young Corporation
U-BLADE
The ends of the blade are angled forward in order to increase
the carrying capacity in loose materials.
CD
Bateman Manufacturing
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Young Corporation
6
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BLADE (continued)
UTILITY DOZER
Front mounted utility blade for all seasons. Winter, ice and
snow control, backfilling, leveling, windrows, light digging etc.
MG
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
Little Falls Machine, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
WOODCHIP
Sidewalls are added , the ends of the blade are angled forward
and the length and height of the blade are increased in order
to increase the carrying capacity in extra light materials, such
as woodchips.
CD, WL
Bateman Manufacturing
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Young Corporation
BOOM
EXTENDIBLE
Excellent for material handling in situations requiring a long
reach.
WL
ACS Industries, Inc.
Bateman Manufacturing
Central Fabricators, Inc.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
New Dymax, Inc.
Pemberton, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
7
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BOOM (continued)
FORESTRY, HIGH LIFT
Boom and grapple system for shortwood pulp logs. Used to
unload trucks and provide maximum stacking height of stock
piles.
WL
Bateman Manufacturing
Denharco, Inc.
Weldco-Beales Manufacturing Ltd.
LOG LOADING
Purpose built boom used for shovel logging and loading at sorting yards or at the road side. Usually has greater lift capacity and
working range than standard excavator fronts. Available with top
or bottom mounted stick and heel cylinders.
HE
Jewell Manufacturing, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pierce Pacific Manufacturing, Inc.
Weldco-Beales Manufacturing Ltd.
Young Corporation
SCRAP HANDLING, THREE SECTION
Purpose built boom with greater dexterity than two section
boom. They are generally used for bin picking, hopper loading
and for unloading barges. Their dexterity also allows them to
reach closer to the carrier than a two section boom. Usually
has greater lift capacity and working range than standard
excavator front. Available with top or bottom mounted third
section cylinder.
HE
Jewell Manufacturing, Inc.
Pierce Pacific Manufacturing, Inc.
Weldco-Beales Manufacturing Ltd.
Young Corporation
8
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BOOM (continued)
SCRAP HANDLING, TWO SECTION
Purpose built boom generally used in fixed loading situations
where the carrier tends to sit in one spot. They are generally
used for bulk material handling and for feeding crushers or
shredders. Usually has greater lift capacity and working range
than standard excavator front. Available with top or bottom
mounted second section cylinder.
HE
Bateman Manufacturing
Jewell Manufacturing, Inc.
Pierce Pacific Manufacturing, Inc.
Weldco-Beales Manufacturing Ltd.
Young Corporation
SUPER LONG FRONT
Purpose built light weight boom used in industrial, governmental, construction and mining applications, where an
extended working range is required. Used for dredging, landscaping, sloping, coffer dam and slurry wall construction.
HE
Bateman Manufacturing
Jewell Manufacturing, Inc.
Pierce Pacific Manufacturing, Inc.
Weldco-Beales Manufacturing Ltd.
Young Corporation
BRUSH CUTTER
ROTARY/FLAIL
Rotary or flail type mower that cuts down brush and small
trees. Useful for clearing along roadways, railways, and utility
rights-of-way.
HE, MG
Bateman Manufacturing
Gregory Manufacturing Company
Industrial Machinery Attachment Co. (IMAC)
Risley Equipment Ltd.
Weldco-Beales Manufacturing Ltd.
9
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, EXCAVATOR
CAST LIP
Heavy duty cast lip wear resistant bucket for shot rock or
tough and abrasive excavation conditions.
HE
ESCO Corporation
Geith, Inc.
Hendrix Manufacturing
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
Pemberton, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
CLAM SHELL
Used for loading free flowing materials (sand, wheat, etc.),
loading logs, handling rocks, pulling stumps and grading a
surface.
HE
Ajusta-Buckets, Division of QCON
Geith, Inc.
Industrial Machinery Attachment Co. (IMAC)
Jewell Manufacturing, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Pierce Pacific Manufacturing, Inc.
Pro-Line/Anvil Attachments
Weldco-Beales Manufacturing Ltd.
Young Corporation
COMPACTION (TAMPING PAD ROLLER)
Compaction is accomplished by running the roller, attached to
the bottom of the bucket, over the backfill.
HE
Felco Industries, Ltd.
10
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, EXCAVATOR (continued)
COMPACTION (VIBRATING HYDRAULIC PLATE)
A vibrating hydraulic plate integral to the bucket allows the
operator to place and compact the backfill material while following closely behind the pipe laying or similar activity.
HE
Felco Industries, Ltd.
CORAL ROCK
A shorter tip radius for greater tip forces enables "peeling" type
digging in coral rock. Wear is reduced because of an increased
number of smaller teeth and the addition of side cutters.
HE
Ajusta-Buckets, Division of QCON
ESCO Corporation
Hensley Attachments
Werk-Brau Company, Inc.
DITCH CLEANING
Shallow and wide bucket for forming and cleaning ditches and
water courses, grading and backfilling and loading loose
material
HE
ACS Industries, Inc.
Ajusta-Buckets, Division of QCON
Attachments International, Inc.
Bateman Manufacturing
C&P Enterprises, Inc.
Central Fabricators, Inc.
Craig Manufacturing Ltd.
Entek Manufacturing, Inc.
ESCO Corporation
Geith, Inc.
Hendrix Manufacturing
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
New Dymax, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
Young Corporation
11
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, EXCAVATOR (continued)
DROP CENTER
The dropped center design cuts a narrow lower trench bordered on both sides by shallower upper trenches. Used for
digging footings as well as pipe bedding. Up to three utilities
could be laid in the same trench.
HE
ESCO Corporation
Pemberton, Inc.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
JAW
Multipurpose bucket that combines the features of a trenching
bucket with a clamshell and grader.
HE
Geith, Inc.
Woods Equipment Company
NARROW TRENCH
The narrow bucket width allows for deep excavation, and also
for digging narrow ditches and hard soil.
HE
Attachments International, Inc.
Geith, Inc.
PAVEMENT REMOVAL
Designed for removing and loading pre-cut or broken pavement. The inclined sides aid in prying the pavement free.
HE
Ajusta-Buckets, Division of QCON
Attachments International, Inc.
Geith, Inc.
Rockland Manufacturing Co.
Werk-Brau Company, Inc.
12
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, EXCAVATOR (continued)
PLATE LIP, HEAVY DUTY
Heavy duty plate lip bucket for general excavation and truck
loading in compact soils, dense clay, gravel or moderate rock
conditions.
HE
ACS Industries, Inc.
Ajusta-Buckets, Division of QCON
Bateman Manufacturing
C&P Enterprises, Inc.
Central Fabricators, Inc.
Charles Machine, Inc.
Craig Manufacturing Ltd.
Entek Manufacturing, Inc.
ESCO Corporation
Geith, Inc.
Hendrix Manufacturing
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
New Dymax, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Pro-Line/Anvil Attachments
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
13
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, EXCAVATOR (continued)
PLATE LIP, STANDARD DUTY
Standard duty plate lip bucket for general excavation and truck
loading in loam or sandy soils containing very little rock.
HE
ACS Industries, Inc.
Ajusta-Buckets, Division of QCON
Attachments International, Inc.
Bateman Manufacturing
Central Fabricators, Inc.
Charles Machine, Inc.
Entek Manufacturing, Inc.
ESCO Corporation
Geith, Inc.
Hendrix Manufacturing
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
New Dymax, Inc.
Pemberton, Inc.
Pro-Line/Anvil Attachments
Rockland Manufacturing Co.
Werk-Brau Company, Inc.
RIPPER
Ripper teeth are positioned on a constant radius around the
back and bottom sides of a bucket for excavating frozen
ground, sandstone, limestone, caliche, shale and coral.
HE
Bateman Manufacturing
ESCO Corporation
Pemberton, Inc.
Woods Equipment Company
ROUND
The curved bottom cuts a trench which cradles the lower
quarter of the pipe. The shape also aids in sloping the trench.
HE
Attachments International, Inc.
Central Fabricators, Inc.
Hensley Attachments
14
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, EXCAVATOR (continued)
SAND/FLAT BOTTOM
Sloped side wall design helps minimize side wall collapse when
trenching in sandy soils.
HE
Ajusta-Buckets, Division of QCON
Attachments International, Inc.
Werk-Brau Company, Inc.
THUMB
Use with a bucket to grasp and hold objects or loose materials,
gather and load logs, build logging roads, pull stumps, stack
and load debris, demolish structures, grub, handle rocks and
load trucks. Hydraulically operated thumb allows clamping over
the full range of bucket movement. Fixed prop clamp relies on
the clamping action of the bucket to hold material. Available in
link and no link designs.
HE
Ajusta-Buckets, Division of QCON
Amulet Manufacturing Co., Inc.
Attachments International, Inc.
Bateman Manufacturing
C&P Enterprises, Inc.
Central Fabricators, Inc.
Charles Machine, Inc.
Craig Manufacturing Ltd.
Entek Manufacturing, Inc.
ESCO Corporation
Geith, Inc.
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
Jewell Manufacturing, Inc.
Mann Corporation
New Dymax, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Progressive Attachments Corporation (PAC)
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
Woods Equipment Company
15
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, EXCAVATOR (continued)
TILTING
Shallow and wide bucket tilts side to side for forming and
cleaning ditches and water courses, grading, backfilling or
cutting sloped trenches.
HE
Bateman Manufacturing
Craig Manufacturing Ltd.
Geith, Inc.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Pemberton, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
TRAPEZOIDAL
Specifically designed for digging ditches to a desired depth
and slope. Long side cutting edges grade the slopes as it
digs. Eliminates wasted digging cycles. Available in any width
and slope desired.
HE
Ajusta-Buckets, Division of QCON
Attachments International, Inc.
Charles Machine, Inc.
Geith, Inc.
Industrial Machinery Attachment Co. (IMAC)
Pemberton, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
V-LINE FROST
Specially designed for excavating frozen ground or layered rock.
The bucket shape concentrates digging forces at one point.
HE
ESCO Corporation
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
16
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, LOADER
COAL/LIGHT MATERIAL
Large capacity bucket for handling coal, dry loam or any light
material.
WL
ACS Industries, Inc.
Ajusta-Buckets, Division of QCON
Bateman Manufacturing
Central Fabricators, Inc.
Charles Machine, Inc.
Craig Manufacturing Ltd.
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
New Dymax, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
Wicker Machine Company
DEMOLITION (ROCK GRAPPLE)
Heavily guarded for use in quarry operations and demolition
work. The clamp is designed to handle large rocks where sorting and sizing are required.
WL
Pro-Line/Anvil Attachments
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
EJECTOR
Equipped with a hydraulically actuated rear plate which ejects
sticky material. The bucket can also be dumped without using
the ejector.
WL
Rockland Manufacturing Co.
17
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, LOADER (continued)
GENERAL PURPOSE
Excellent for most applications, such as digging soil and rehandling soil, sand, aggregate and a variety of other commonly handled materials.
WL
ACS Industries, Inc.
Bateman Manufacturing
Central Fabricators, Inc.
Charles Machine, Inc.
Craig Manufacturing Ltd.
Geith, Inc.
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
New Dymax, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
Wicker Machine Company
GRAPPLE
Hydraulically actuated grapple is used to hold extra light or
bulky materials in the bucket.
WL
ACS Industries, Inc.
Bateman Manufacturing
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
New Dymax, Inc.
Pemberton, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Tink, Inc.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
18
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, LOADER (continued)
HIGH DUMP
Cylinders mounted in the bucket subframe hydraulically lift
the back of the bucket adding dump height and reach to your
loader.
WL
Bateman Manufacturing
Craig Manufacturing Ltd.
Geith, Inc.
Industrial Machinery Attachment Co. (IMAC)
New Dymax, Inc.
Pemberton, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Tink, Inc.
Weldco-Beales Manufacturing Ltd.
HOT SLAG
Constructed to withstand the extreme heat and abrasion of
hot slag removal in steel mills.
WL
ACS Industries, Inc.
Charles Machine, Inc.
Craig Manufacturing Ltd.
Geith, Inc.
Rockland Manufacturing Co.
LANDFILL
High-back, shallow bucket with a high spill screen or trash
guard.
WL
Charles Machine, Inc.
Craig Manufacturing Ltd.
Pemberton, Inc.
Rockland Manufacturing Co.
19
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, LOADER (continued)
MULTIPURPOSE
Combines the features of a general purpose bucket with a
clamshell, dozer and scraper.
WL
ACS Industries, Inc.
Bateman Manufacturing
Craig Manufacturing Ltd.
Geith, Inc.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
New Dymax, Inc.
Pemberton, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
OVER THE FORK
Designed to engage fork tines so bucket can be utilized without removing forks.
WL
Craig Manufacturing Ltd.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Wicker Machine Company
ROCK, SKELETON
Used for sorting or grading shot rock.
WL
ACS Industries, Inc.
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Pemberton, Inc.
Pro-Line/Anvil Attachments
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
20
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, LOADER (continued)
ROCK, SPADE NOSE
High strength wear resistant bucket with V-shaped cutting
edge for improved penetration when handling shot rock or
digging in severe applications.
WL
ACS Industries, Inc.
Bateman Manufacturing
Charles Machine, Inc.
Craig Manufacturing Ltd.
Geith, Inc.
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
New Dymax, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Pro-Line/Anvil Attachments
Rockland Manufacturing Co.
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
ROCK, STRAIGHT EDGE
High strength wear resistant bucket for handling shot rock.
WL
ACS Industries, Inc.
Bateman Manufacturing
Charles Machine, Inc.
Craig Manufacturing Ltd.
Geith, Inc.
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
New Dymax, Inc.
Pemberton, Inc.
Pro-Line/Anvil Attachments
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
21
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, LOADER (continued)
SIDE DUMP
Permits side dumping to reduce maneuvering requirements
and time.
WL
ACS Industries, Inc.
Bateman Manufacturing
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Pemberton, Inc.
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
SNOW/BASKET
Oversized, light weight bucket for clearing and loading snow.
WL
ACS Industries, Inc.
Ajusta-Buckets, Division of QCON
Bateman Manufacturing
Charles Machine, Inc.
Craig Manufacturing Ltd.
Henke Manufacturing Corporation
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
New Dymax, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
TRASH GRAPPLE
Designed to handle trash at transfer stations and recycling
facilities. The split clamp design enables the operator to
securely grasp uneven loads.
WL
Craig Manufacturing Ltd.
Pemberton, Inc.
Tink, Inc.
22
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
BUCKET, LOADER (continued)
WOODCHIP
Extra-large capacity bucket for handling woodchips, leaves,
straw, silage or any other extra-light material.
WL
ACS Industries, Inc.
Ajusta-Buckets, Division of QCON
Bateman Manufacturing
Charles Machine, Inc.
Craig Manufacturing Ltd.
Geith, Inc.
Industrial Machinery Attachment Co. (IMAC)
New Dymax, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Rockland Manufacturing Co.
Wicker Machine Company
CAB
ENCLOSURE
Rigid panels or soft-side enclosures that fit inside or outside
of machine ROPS.
CD, WL
Campbell International, Inc.
Lake Superior Cabs, Inc.
RISER
A fixed or variable position mechanism for raising the cab for
better visibility.
HE
Bateman Manufacturing
Industrial Machinery Attachment Co. (IMAC)
Jewell Manufacturing, Inc.
Pierce Pacific Manufacturing, Inc.
Weldco-Beales Manufacturing Ltd.
Young Corporation
23
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
CHAINS
TIRE
Used in severe applications such as hot slag, rock surfaces,
limestone, gypsum, bauxite, granite, basalt, porphyry, and
other applications where tire protection and increased traction
are required.
MG, WL
Rud Chain, Inc.
COMPACTOR
VIBRATORY PLATE
Used in place of a bucket or mounts to the bucket for compacting a variety of materials or for driving pilings.
HE
Allied Construction Products, Inc.
INDECO
Kent Demolition Tool
NPK Construction Equipment, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Rammer, Inc.
Stanley Hydraulic Tools
Teledyne Specialty Equipment CM Products, Inc.
Tramac Corporation
WHEEL
Used in place of a bucket or mounts to the bucket for mechanical compaction of trenches after backfilling.
HE
Ajusta-Buckets, Division of QCON
Craig Manufacturing Ltd.
Entek Manufacturing, Inc.
Guest Industries, Inc.
Hendrix Manufacturing
Hensley Attachments
JRB Company, Inc.
Rockland Manufacturing Co.
Werk-Brau Company, Inc.
24
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
CONCRETE
CRUSHER
Designed for breaking and downsizing large sections of concrete beams, parapets, footings, foundations etc.
HE
INDECO
JRB Company, Inc.
LaBounty Manufacturing
NPK Construction Equipment, Inc.
Pemberton, Inc.
Rammer, Inc.
Rockland Manufacturing Co.
Teledyne Specialty Equipment CM Products, Inc.
Tramac Corporation
PULVERIZER
Designed for demolishing reinforced concrete structures and
for crushing concrete. Downsizes concrete so that rebar can
easily be removed.
HE
Geith, Inc.
INDECO
JRB Company, Inc.
LaBounty Manufacturing
Rammer, Inc.
Teledyne Specialty Equipment CM Products, Inc.
Tramac Corporation
CONTROLS/INSTRUMENTATION
ELECTRICAL
Automation systems, compressor panels, electric gages, electric motor controls, engine panels, gen-set controls, magnetic
switches and tattletales, pressure and vacuum gauges, temperature gauges, time vibration and overspeed controls, and
valves.
CD, HE, MG, WL
Frank W. Murphy Manufacturer, Inc.
25
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
CONVERTER
ELECTRICAL
Voltage step up and step down converters for 12V & 24V
accessories.
CD, HE, MG, WL
Sure Power Industries, Inc.
CONVEYOR
BEDDING
The hopper and conveyor system attaches to the excavator and
allows the operator to control bedding material availability; the
amount required when required.
HE
Felco Industries, Ltd.
26
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
COUPLER
QUICK HITCH, EXCAVATOR
Permits changing buckets or special attachments in a few
minutes, usually without tools and without leaving the operator's seat.
HE
ACS Industries, Inc.
Ajusta-Buckets, Division of QCON
Attachments International, Inc.
Bateman Manufacturing
Central Fabricators, Inc.
Craig Manufacturing Ltd.
Entek Manufacturing, Inc.
ESCO Corporation
Geith, Inc.
Hendrix Manufacturing
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
LaBounty Manufacturing
Mann Corporation
New Dymax, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Progressive Attachments Corporation (PAC)
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
Woods Equipment Company
QUICK HITCH, GRADER
Permits changing special attachments, such as plows or
sweepers in a few minutes, usually without tools and without
leaving the operator's seat.
MG
ACS Industries, Inc.
Henke Manufacturing Corporation
Industrial Machinery Attachment Co. (IMAC)
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
27
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
COUPLER (continued)
QUICK HITCH, LOADER
Permits changing buckets or special attachments in a few
minutes, usually without tools and without leaving the operator's seat.
WL
ACS Industries, Inc.
Bateman Manufacturing
Central Fabricators, Inc.
Geith, Inc.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
New Dymax, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
RAIL CAR
For coupling to and moving rail cars.
WL
ACS Industries, Inc.
Industrial Machinery Attachment Co. (IMAC)
Pemberton, Inc.
CUSTOM MODIFICATIONS
EXCAVATOR
Machine conversions such as raised cab, widened or lengthened undercarriage, purpose built booms, grapple, magnet
and generator.
HE
Crane Systems, Inc.
28
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
CUTTING EDGE
NON METALLIC
Bolt on non metallic wear pad for use at waste transfer stations to increase concrete floor life, increase traction, increase
tire life and reduce noise. Also, used on snowplows when
plowing over road reflectors, protruding manhole covers, or in
slush conditions.
MG, WL
F&B
SETCO, Solid Tire & Rim (Southeast Tire, Inc.)
Superior Tire and Rubber Corporation
Valk Manufacturing Co.
Viking Cives, Inc.
DELIMBER
STROKE
Grabs, butts, delimbs, tops, measures, cuts to length, sorts
and stacks trees.
HE
Denharco, Inc.
Pierce Pacific Manufacturing, Inc.
Risely Equipment Ltd.
EMISSION
CONTROLS
Catalytic converters reduce HC and CO output. Soot traps
reduce soot output.
CD, HE, MG, WL
Engelhard Corporation
29
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
FAIRLEAD
FOR WINCHES
Used with a winch to guide the winch line, raise log end to
avoid obstructions, and transfer log weight to the machine to
increase tractive effort.
CD, WL
Industrial Machinery Attachment Co. (IMAC)
Weldco-Beales Manufacturing Ltd.
FELLER BUNCHER
WITH SAW HEAD
Used in selective thinning and clear cut logging applications,
when stems must be cut cleanly without shattering. Can grab,
hold, cut and bunch stems before transporting to a skid pile.
Available with chain or disc saw. Some units are equipped
with a delimber.
HE, WL
Morbark
Risley Equipment Ltd.
WITH SHEAR
Used for pulp wood harvesting or whole tree chipping operations and in selective thinning and clear cut logging applications, when shattering of stem is acceptable. Can grab, hold,
shear and bunch multiple stems before transporting to a skid
pile.
HE, WL
Morbark
30
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
FIRE SUPPRESSION
SYSTEMS
Automatic detection and actuation delivers a dry chemical to
extinguish machine fire.
CD, HE, MG, WL
AFEX, Division of Bonaventure Group
Ansul Fire Protection
FORK, LOG AND LUMBER
DOUBLE TOP CLAMP
Fork with two hydraulic top clamps, which close inside tines
or on top of tine tips.
WL
ACS Industries, Inc.
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Medford Fabrication
Pemberton, Inc.
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
Wicker Machine Company
LOG AND LUMBER
Fork with no clamp.
WL
ACS Industries, Inc.
Craig Manufacturing Ltd.
Geith, Inc.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Pemberton, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Wicker Machine Company
31
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
FORK, LOG AND LUMBER (continued)
PADDLE TOP CLAMP
Fork with a paddle top clamp.
WL
ACS Industries, Inc.
Attachments International, Inc.
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Pemberton, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Werk-Brau Company, Inc.
Wicker Machine Company
PEELER BLOCK
Available with single or double top clamp the low profile narrow forks are used to feed steam vats.
WL
Medford Fabrication
SINGLE TOP CLAMP
Fork with a single center mounted hydraulic top clamp.
WL
ACS Industries, Inc.
Craig Manufacturing Ltd.
JRB Company, Inc.
Pemberton, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Wicker Machine Company
32
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
FORK, MILLYARD
DOUBLE TOP CLAMP
Severe logging and millyard application fork with two hydraulic
top clamps, which close inside tines or on top of tine tips.
WL
ACS Industries, Inc.
Bateman Manufacturing
Industrial Machinery Attachment Co. (IMAC)
Pacific Services Manufacturing, Inc. (PSM)
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Wicker Machine Company
Young Corporation
PADDLE TOP CLAMP
Severe logging and millyard application fork with paddle top
clamp.
WL
ACS Industries, Inc.
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Medford Fabrication
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Wicker Machine Company
33
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
FORK, UTILITY
CAR BODY
Fork with long tines specifically designed to handle automobile bodies in salvage operations.
WL
ACS Industries, Inc.
Attachments International, Inc.
Charles Machine, Inc.
Craig Manufacturing Ltd.
Guest Industries, Inc.
JRB Company, Inc.
Pemberton, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Werk-Brau Company, Inc.
Wicker Machine Company
CONSTRUCTION
Heavy duty design for handling palletized and loose construction materials.
WL
ACS Industries, Inc.
Attachments International, Inc.
Central Fabricators, Inc.
Charles Machine, Inc.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
Wicker Machine Company
HYDRAULIC ADJUSTABLE TINE
The operator can control the tine spread hydraulically from
within the cab.
WL
ACS Industries, Inc.
Craig Manufacturing Ltd.
34
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
FORK, UTILITY (continued)
LIP MOUNTED
Forks manually clamp on bucket edge. No tools are needed for
installation.
WL
Attachments International, Inc.
Guest Industries, Inc.
Rockland Manufacturing Co.
OVER THE BUCKET
Forks fit over the front of the bucket, permitting quick installation and removal. No tools are required for hookup. The general purpose forks can be used for a variety of applications.
WL
Attachments International, Inc.
Guest Industries, Inc.
Industrial Machinery Attachment Co. (IMAC)
Rockland Manufacturing Co.
Kenco, Inc.
Werk-Brau Company, Inc.
PALLET
Standard design for handling palletized materials.
WL
ACS Industries, Inc.
Bateman Manufacturing
Craig Manufacturing Ltd.
Guest Industries, Inc.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Medford Fabrication
New Dymax, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Wicker Machine Company
35
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
FORK, UTILITY (continued)
PIPE/POLE W AND W/O GRAPPLE
Fork with grapples specially designed for pipe or pole handling.
WL
ACS Industries, Inc.
Ajusta-Buckets, Division of QCON
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Medford Fabrication
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Wicker Machine Company
GRADE CONTROL
LASER
A full line of products using modern laser technology to assist
the contractor in creating accurate level and sloped sites.
CD, HE, MG, WL
Laser Alignment, Inc.
Spectra Precision, Inc.
GRAPPLE
BARRIER LIFTING
A mechanical grapple used for placing and moving portable
highway barriers.
HE
Kenco, Inc.
36
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
GRAPPLE (continued)
BASKET BUNCHING HEAD
Made specifically for picking up bunched logs stacked by a
feller buncher. Can also be used to pick up individual logs.
CD
TREE TOW (Brigden Manufacturing, Inc.)
BUTT AND TOP
Rotating head with hydraulically positioned stabilizing arms
on each side of a centrally mounted grapple for handling tree
length logs in log sorting, log forwarding or log loading operations.
HE
Bateman Manufacturing
Denharco, Inc.
Industrial Machinery Attachment Co. (IMAC)
Risley Equipment Ltd.
Weldco-Beales Manufacturing Ltd.
Young Corporation
BUTT TYPE (LOG)
Rotating grapple for handling short logs or pulpwood. Grapple
tines close tip to tip. Generally used for loading.
HE
Industrial Machinery Attachment Co. (IMAC)
Weldco-Beales Manufacturing Ltd.
Young Corporation
37
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
GRAPPLE (continued)
BYPASS TYPE (LOG)
Rotating grapple used for handling short or long logs. Grapple
tines can bypass to fully enclose small diameter logs or single
logs. Used for loading or sorting.
HE
Industrial Machinery Attachment Co. (IMAC)
Jewell Manufacturing, Inc.
Pierce Pacific Manufacturing, Inc.
Weldco-Beales Manufacturing Ltd.
Young Corporation
DEMOLITION
Fixed jaw by-passing type grapple for demolition, scrap recycling, rip rap, land clearing, log and pipe handling and quarry
applications.
HE
Ajusta-Buckets, Division of QCON
Allied-Gator, Inc.
Attachments International, Inc.
Bateman Manufacturing
Central Fabricators, Inc.
Geith, Inc.
Genesis Equipment & Manufacturing, Inc.
Hensley Attachments
JRB Company, Inc.
LaBounty Manufacturing
Mann Corporation
Pemberton, Inc.
Pro-Line/Anvil Attachments
Rockland Manufacturing Co.
Werk-Brau Company, Inc.
Woods Equipment Company
38
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
GRAPPLE (continued)
GENERAL PURPOSE
Fixed jaw by-passing type grapple for land clearing, raking
and stacking burn pile, medium duty grubbing, handling small
scrap, demolishing wood and brick structures and rehandling
bulky loose materials.
HE
Ajusta-Buckets, Division of QCON
Allied Construction Products, Inc.
Allied-Gator, Inc.
Central Fabricators, Inc.
Entek Manufacturing, Inc.
Geith, Inc.
Genesis Equipment & Manufacturing, Inc.
Jewell Manufacturing, Inc.
JRB Company, Inc.
LaBounty Manufacturing
Mann Corporation
NPK Construction Equipment, Inc.
Pemberton, Inc.
Progressive Attachments Corporation (PAC)
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
Young Corporation
HEELBOOM
Rotating grapple with hydraulically positioned heeling rack
(live heel) for handling tree length logs in log sorting, log forwarding or log loading operations.
HE
Industrial Machinery Attachment Co. (IMAC)
Jewell Manufacturing, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pierce Pacific Manufacturing, Inc.
Weldco-Beales Manufacturing Ltd.
Young Corporation
39
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
GRAPPLE (continued)
ORANGE PEEL
Hydraulically actuated tines fully enclose materials being handled. Suitable for handling scrap, waste and bulk materials.
HE
Geith, Inc.
Genesis Equipment & Manufacturing, Inc.
Pemberton, Inc.
Pierce Pacific Manufacturing, Inc.
Weldco-Beales Manufacturing Ltd.
Young Corporation
SCRAP/SALVAGE
A variety of models and sizes are available to match any material handling need that may arise. Ideal for handling single
items, bulk scrap and large items such as car bodies.
HE
Ajusta-Buckets, Division of QCON
Bateman Manufacturing
Geith, Inc.
Genesis Equipment & Manufacturing, Inc.
LaBounty Manufacturing
Pierce Pacific Manufacturing, Inc.
Pro-Line/Anvil Attachments
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
Young Corporation
STRADDLE MOUNT GRAPPLE ATTACHMENT
(Standard or Steep Slope)
The grapple is attached to the rear of the tractor by means of
a boom assembly. The main boom frame is a see through
assembly which allows the operator to see the load at all
times. It also has a jib boom on top to allow the operator to
position the load in the best location. Fairlead roller attachment is provided as an option to allow for line skidding in
restricted terrain and rescuing other machines. A light weight
one piece boom is also available for small tractors.
CD
Industrial Machinery Attachment Co. (IMAC)
Jewell Manufacturing, Inc.
TREE TOW (Brigden Manufacturing, Inc.)
40
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
GRAPPLE (continued)
TONG HEAD
Made specifically for picking up individual logs. High squeezing pressure on the tips of the tines provide superior holding
capability for all types of wood and conditions. The swivel
housing allows the grapple to rotate. Can be used to pick up a
stack of logs.
CD
TREE TOW (Brigden Manufacturing, Inc.)
GUARDING PACKAGE
EXCAVATOR
Heavy duty guarding designed to protect the operator and the
equipment. The guarding packages consist of cab guards,
belly pan, undercarriage rock guards, side guarding, full length
catwalks, machinery underhouse guards, front guarding to
protect fuel and hydraulic tank, window screens, etc.
HE
Bateman Manufacturing
Industrial Machinery Attachment Co. (IMAC)
Jewell Manufacturing, Inc.
JRB Company, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pierce Pacific Manufacturing, Inc.
Risely Equipment Ltd.
Weldco-Beales Manufacturing Ltd.
Young Corporation
LOADER AND DOZER
Heavy duty guarding designed to protect the operator and the
equipment. The guarding packages consist of cab guards,
belly pan, undercarriage rock guards, side guarding, sweeps,
screens, etc.
CD, WL
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Risley Equipment Ltd.
Weldco-Beales Manufacturing Ltd.
41
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
HAMMER
HYDRAULIC
Used during construction, demolition, mining and quarry work
for breaking or demolishing concrete structures, cutting
through asphalt or frozen ground, trenching in frozen ground
or rock and for breaking oversized material into smaller
pieces.
HE
Allied Construction Products, Inc.
ESCO Corporation
Guest Industries, Inc.
INDECO
JRB Company, Inc.
Kent Demolition Tool
NPK Construction Equipment, Inc.
Rammer, Inc.
Stanley Hydraulic Tools
Teledyne Specialty Equipment CM Products, Inc.
Tramac Corporation
HARVESTER
TREE
Designed for tree length or cut to length harvesting methods
of trees at a landing, roadside or at the stump. Can fell, top,
delimb, measure and cut to length.
HE
Denharco, Inc.
Pierce Pacific Manufacturing, Inc.
Risely Equipment Ltd.
HYDRAULIC KITS
EXCAVATOR
Kits available for the plumbing and control of various attachments. Used when installing such attachments as thumbs,
hammers, bucket tilt, compactors, etc.
HE
ESCO Corporation
HKX, Inc.
42
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
LEVELER
TURNTABLE
Used to level the upper structure of an excavator in order to
reduce swing power requirements and make it easier to dig a
straight and vertical trench.
HE
Pierce Pacific Manufacturing, Inc.
LUBRICATION SYSTEM
CENTRAL
Centrally located lubrication system. Two basic types of systems are available. The automatic system dispenses grease to
tractor pins and bushings at a pre-determined interval from a
centrally located reservoir. The second type of system
requires that grease be pumped into a centrally located manifold which then distributes the grease evenly to the pins and
bushings.
CD, HE, MG, WL
Lincoln Industrial
LubriQuip, Inc.
MAGNET
SCRAP HANDLING
Used in scrap and salvage yards for handling ferrous metal
stock that is either too large (slabs, sheets etc.) or too small
(cut offs, turnings etc.) to be handled by a grapple.
HE
Ohio Magnetics, Inc.
O.S. Walker
43
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
PILE DRIVER
VIBRATORY
Vibratory action loosens and separates the particles of granular soils which allows the driver/extractor to literally slip sheet
pile, H-Beams, guard rail posts and similar piers into the earth
quickly, quietly and economically.
HE
Tramac Corporation
PLOWS
CABLE
A ripper type plow used for direct underground placement of
cables or flexible pipe that creates less ground disturbance
than open trenching.
CD
Ateco
FIRELINE
Directly attached or towed behind plows that clear dense
underbrush and grasses to create a firebreak.
CD
FESCO, Division of Mathis Plow Co.
Hester Plow Company
PRECLEANER
AIR CLEANER
Used to increase the replacement interval for the existing
engine air filter by precleaning the incoming air.
CD, HE, MG, WL
Donaldson Company
Sy-Klone Company
Turbo Industries
44
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
PROCESSOR
UNIVERSAL
Interchangeable jaws and rotation capability increase project
versatility in demolition and in any application requiring efficient processing of steel or concrete.
HE
Genesis Equipment & Manufacturing, Inc.
LaBounty Manufacturing
NPK Construction Equipment, Inc.
Teledyne Specialty Equipment CM Products, Inc.
Tramac Corporation
QUICK FILL
COUPLERS
Couplers that enable fast, no spill transfer of fuel, coolant, or
oils between service truck and machine.
CD, HE, MG, WL
Adel Wiggins Group - TransDigim, Inc.
RAKE
BLADE
Used for land clearing operations such as removing stumps,
roots, and rocks. Two styles are available. One fits over dozer
blade and swings up or is easily removed when not in use.
The other style replaces the blade and mounts directly to the
C-frame.
CD
Bateman Manufacturing
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
Mann Corporation
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
45
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
RAKE (continued)
BUCKET
Rake attached to lower portion of bucket. Used for clearing,
trashing, rock sifting, and gathering. Can be easily removed or
chained to the buckets top moldboard so the bucket can be
used in the normal manner.
WL
Mann Corporation
Progressive Attachments Corporation (PAC)
CLEARING AND STACKING (WITH AND W/O CLAMPS)
Ideal for land clearing. The curved teeth remove and stack rocks,
trees, brush and demolition debris while sifting out dirt.
CD, WL
ACS Industries, Inc.
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Mann Corporation
Pemberton, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
LAND CLEARING
Used for the clearing, handling, and mounding of brush, rocks,
and demolition debris.
HE
Attachments International, Inc.
Bateman Manufacturing
Craig Manufacturing Ltd.
Jewell Manufacturing, Inc.
Pacific Services Manufacturing, Inc. (PSM)
Pemberton, Inc.
Progressive Attachments Corporation (PAC)
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
46
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
RAKE (continued)
LOADER (WITH AND W/O CLAMPS)
Used for land clearing. Long curved tines, for maximum load
capacity, enable the operator to pick up and load debris at
truck height while sifting out dirt.
WL
ACS Industries, Inc.
JRB Company, Inc.
Pemberton, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
RIDE CONTROL
LOADER
Bucket suspension control which reduces fore and aft pitching motion during higher speed travel.
WL
Paul Wever Construction Equipment Co., Inc.
RIPPER
REAR MOUNTED PARALLEL
Parallel linkage maintains tip to ground angle regardless of
working depth. The upper links are replaced with hydraulic
cylinders on some models enabling the operator to adjust the
tip to ground angle for the desired penetration angle.
CD, MG, WL
ACS Industries, Inc.
Ateco
Weldco-Beales Manufacturing Ltd.
47
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
RIPPER (continued)
REAR MOUNTED RADIAL
Linkage geometry acts in an arc, so that the penetration angle
of the tip to the ground varies as the tip is lowered.
CD, MG, WL
ACS Industries, Inc.
Ateco
New Dymax, Inc.
SCARIFIER
Used as a light duty ripper to loosen hard packed dirt and rip
up asphalt so the surface can then be graded.
MG
Ateco
Craig Manufacturing Ltd.
Henke Manufacturing Corporation
Industrial Machinery Attachment Co. (IMAC)
Little Falls Machine, Inc.
New Dymax, Inc.
Rylind Industries, Inc.
Weldco-Beales Manufacturing Ltd.
48
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
RIPPER (continued)
TOOTH
Used in place of, or attached to the back of the bucket for
breaking rock, pavement, ice, frozen ground and root systems.
HE
Ajusta-Buckets, Division of QCON
Attachments International, Inc.
Bateman Manufacturing
Central Fabricators, Inc.
Craig Manufacturing Ltd.
Entek Manufacturing, Inc.
ESCO Corporation
Geith, Inc.
Guest Industries, Inc.
Hendrix Manufacturing
Hensley Attachments
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Mann Corporation
Pemberton, Inc.
Progressive Attachments Corporation (PAC)
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
Werk-Brau Company, Inc.
SCALE
PAYLOAD
On board weighing system weighs bucket payload on the
move.
HE, WL
Evergreen Weigh, An SI Technologies Company
Load Rite North America
49
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
SHEAR
HYDRAULIC MOBILE
Concrete, metal and wood shear that mounts in place of a bucket or arm that is used for demolition and scrap processing.
HE
Allied-Gator, Inc.
Geith, Inc.
Genesis Equipment & Manufacturing, Inc.
JRB Company, Inc.
LaBounty Manufacturing
NPK Construction Equipment, Inc.
Pemberton, Inc.
Teledyne Specialty Equipment CM Products, Inc.
Tramac Corporation
Weldco-Beales Manufacturing Ltd.
RAILROAD RAIL PROCESSOR
Used for efficient downsizing of scrap rail and other brittle
metals.
HE
LaBounty Manufacturing
STUMP
Used for splitting and grubbing out stumps. Quickly reduces
stumps and other wood debris to proper size for tub grinding
and landfill operations.
HE
Jewell Manufacturing, Inc.
LaBounty Manufacturing
Mann Corporation
Pemberton, Inc.
Rockland Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
50
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
SNOWBLOWER
LOADER
The most popular snow remover tool in heavy, wet snow belt
areas. Travel speed varies with depth of snow, plus the blower
can be raised to handle very deep drifts more efficiently than
other snow removers. Two basic types exist: one is unitized,
the other features a rear mounted engine.
WL
R.P.M. Tech, Inc.
Weldco-Beales Manufacturing Ltd.
SNOW PLOW
AIRPORT
Wide plows with large capacity specifically designed to
remove snow from airport ramps, runways and parking areas.
MG, WL
Craig Manufacturing Ltd.
Henke Manufacturing Corporation
Little Falls Machine, Inc.
Rylind Industries, Inc.
Valk Manufacturing Co.
Viking Cives, Inc.
LIP MOUNTED
Plow is mounted to the bucket cutting edge and can be easily
removed to allow for normal bucket usage. Plow can be used
straight or angled
WL
Guest Industries, Inc.
51
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
SNOW PLOW (continued)
ONE WAY
Discharges snow to one side and is suitable for high speed
snow removal at airports, highways, shopping centers, city
streets and rural roads. Rigid and trip blades are available.
MG, WL
Craig Manufacturing Ltd.
Little Falls Machine, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Valk Manufacturing Co.
Viking Cives, Inc.
Weldco-Beales Manufacturing Ltd.
REVERSIBLE
Plow can be angled from side to side, while clearing snow
from air ports, parking lots and urban or rural roads.
MG, WL
Bateman Manufacturing
Central Fabricators, Inc.
Craig Manufacturing Ltd.
Henke Manufacturing Corporation
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Little Falls Machine, Inc.
New Dymax, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Valk Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
V PLOW
The plow is installed to form a “ V “ shape and pushes snow to
both sides. The faster the machine travels the farther it throws
the snow. The plow is designed for high drifts and can also
travel at high speed through light and shallow snow.
MG, WL
Craig Manufacturing Ltd.
Henke Manufacturing Corporation
Industrial Machinery Attachment Co. (IMAC)
Little Falls Machine, Inc.
New Dymax, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Valk Manufacturing Co.
Weldco-Beales Manufacturing Ltd.
52
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
SNOW PLOW (continued)
WING GATE
Gate blocks wing plow discharge to prevent snow-filled driveways.
MG, WL
Craig Manufacturing Ltd.
Industrial Machinery Attachment Co. (IMAC)
Weldco-Beales Manufacturing Ltd.
WING MOUNTED
The wing mounted snow plow provides added reach and versatility to the tractor. The hydraulic wing assembly allows for
full articulation of the tractor with the wing in any of the plow
positions or carry position.
MG, WL
Craig Manufacturing Ltd.
Henke Manufacturing Corporation
Industrial Machinery Attachment Co. (IMAC)
Little Falls Machine, Inc.
Rockland Manufacturing Co.
Rylind Industries, Inc.
Viking Cives, Inc.
Weldco-Beales Manufacturing Ltd.
SPADE
TREE
Digs trees for transplanting with root ball intact.
WL
Caretree Systems
SPLITTER
STUMP
Used for stump clearing operations. Splits and pries stumps
to reduce the time needed to doze the stumps out. Splitter
mounts in place of ripper.
CD
Ateco
Weldco-Beales Manufacturing Ltd.
53
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
STARTING AIDS
COLD WEATHER
Electrical heating equipment to aid in the starting of internal
combustion engines. Coolant, oil, and battery heating systems.
CD, HE, MG, WL
Kim Hotstart Mfg. Co., Inc.
SWEEPER
BUCKET PICK UP
The sweeping action of the brushes pick up small and large
debris and shoot it into a bucket. To dump the load raise the
sweeper over a trash container or a truck and tilt the debris
bucket.
WL
Sweepster, Inc.
ROTARY BROOM
Used to sweep dirt, sand, snow, and other debris from paved
or unpaved areas. Ideal for airports, factories, farms, mines,
quarries, schools and city, county and state road maintenance. Watering systems are usually available.
WL
Bateman Manufacturing
Central Fabricators, Inc.
Industrial Machinery Attachment Co. (IMAC)
JRB Company, Inc.
Sweepster, Inc.
TIRE
SOLID
Used in place of pneumatic tires and rims in applications
where tires can be cut and punctured, such as construction,
demolition, forestry, glass, mining, paper, recycling, scrap,
quarry and waste.
HE, WL
SETCO, Solid Tire & Rim (Southeast Tire, Inc.)
54
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
ATTACHMENT TYPE
TRACK PADS
NON METALLIC
Bolts to steel grouser to protect road pavement and pavement
at scrap and mill yards.
CD, HE
BLS Enterprises, Inc.
Superior Tire and Rubber Corporation
UNDERCARRIAGE
RUBBER TIRED
Replaces crawler type undercarriage with a wheeled type.
Includes outriggers to provide stability and adjustment on
rough terrain.
HE
Pierce Pacific Manufacturing, Inc.
WARNING
LIGHTS
Heavy duty 12V & 24V warning lights.
CD, HE, MG, WL
ECCO
Sure Power Industries, Inc.
WINCH
HYDRAULIC
Hydraulically powered front or rear mounted cable winches for
pulling, towing, or hoisting loads.
CD
Allied Systems Company
BRADEN/CARCO/GEARMATIC, Divisions of PACCAR
FESCO, Division of Mathis Plow Co.
55
CD = Crawler Dozer
MG = Motor Grader
HE = Hydraulic Excavator
WL = Wheel Loader
MANUFACTURER INDEX
ACS Industries, Inc.
2151 Mogadore Road
Kent, OH 44240-0810
330-678-2511
800-321-2348
Fax: 330-678-0859
Contact:
Tom Kuhar
Mike Novotny
Barrel Handler, Loader
Blade, Loader
Boom, Extendible
Bucket, Excavator
Ditch Cleaning
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Bucket, Loader
Coal/Light Material
General Purpose
Grapple
Hot Slag
Multipurpose
Rock, Skeleton
Rock, Spade Nose
Rock, Straight Edge
Side Dump
Snow/Basket
Woodchip
Coupler
Quick Hitch, Excavator
Quick Hitch, Grader
Quick Hitch, Loader
20202 Hwy. 59, North, #175
Humble, TX 77338
281-540-2111
800-231-1826
Fax: 281-540-1666
Contact:
Gena Draper
Cathy Lefler
Adel Wiggins Group - TransDigim, Inc.
5000 Triggs Street
P.O. Box 22228
Los Angeles, CA 90022
213-269-9181
Fax: 213-526-4263
Contact:
Rebecca Valle
Russel Beemer
Quick Fill Couplers for:
Coolant
Crankcase oil
Fuel
Hydraulic oil
Transmission oil
AFEX, Division of Bonaventure Group, Inc.
5808 Lease Lane
Raleigh, NC 27613
919-781-6610
Fax: (919) 787-3915
E-Mail: afex@mindspring.com
Web Site: afex.home.mindspring.com
Contact: John Carter
Fire Suppression, Systems
56
Coupler (continued)
Railcar
Fork, Log and Lumber
Double Top Clamp
Log and Lumber
Paddle Top Clamp
Single Top Clamp
Fork, Millyard
Double Top Clamp
Paddle Top Clamp
Fork, Utility
Car Body
Construction
Hydraulic Adjustable Tine
Pallet
Pipe/Pole Grapple
Rake
Clearing and Stacking (with and
w/o clamps)
Loader (with and w/o clamps)
Ripper
Rear Mounted Parallel
Rear Mounted Radial
MANUFACTURER INDEX
Ajusta-Buckets, Division of QCON
Barrel Handler, Excavator
Blade, Backfill
Bucket, Excavator
Coral Rock
Clam Shell
Ditch Cleaning
Pavement Removal
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Sand/Flat Bottom
Thumb
Trapezoidal
P.O. Box 6307
2305 Manchester Rd.
Erie, PA 16512-6307
888-448-2486
814-838-4597
Fax: 814-833-3781
E-Mail: buckets@ncinter.net
Web Site:
ncinter.net/~buckets/index.html
Contact: Stuart Foradora
Allied Construction Products, Inc.
3900 Kelley Ave.
Cleveland, OH 44114
800-321-1046
216-431-2600 Ext. 212
Fax: 216-431-2602
E-Mail: alliedconstrprod.com
Contact: Steve Sabo
Asphalt Cutter
Bucket Mounted
Moldboard Mounted
Compactor, Vibratory Plate
Grapple, General Purpose
Hammer, Hydraulic
Allied-Gator, Inc.
2100 Poland Ave.
Youngstown, OH 44502
800-624-2867
330-743-4437
Fax: 330-744-3218
E-mail: alliedconsolidated@worldnet.att.net
Contact:
Mark Ramun
Marc Cossette
Grapple
Demolition
General Purpose
Shear, Hydraulic Mobile
Allied Systems Company
Winch, Hydraulic
2300 Oregon St.
Sherwood, OR 97140-9799
503-625-2560
Fax: 503-625-7269
Contact: Jerry Moser
57
Bucket, Loader
Coal/Light Material
Snow/Basket
Woodchip
Compactor, Wheel
Coupler, Quick Hitch, Excavator
Fork, Utility
Pipe/Pole Grapple
Grapple
Demolition
General Purpose
Scrap/Salvage
Ripper, Tooth
MANUFACTURER INDEX
Altrax
See Charles Machine, Inc.
Amulet Manufacturing Co., Inc.
5640 West End Road
Arcata, CA 95521
800-526-8538
707-822-2282
Fax: 707-822-2398
Contact: Deric Wagner
Bucket, Excavator
Thumb
Ansul Fire Protection
One Stranton St.
Marinette, WI 54143
630-305-5700
Fax: 630-305-3360
E-Mail: bborland@ansul.geis.com
E-Mail:
bklingenmaie@ansul.geis.com
Web Site: ansul.com
Contact:
Bill Borland
Bill Klingenmaier
Fire Suppression, Systems
Ateco
P.O. Box 1079
Camarillo, CA 93011
800-842-9358
805-388-3839
Fax: 805-389-1131
Contact: Brad Paulson
Asphalt Cutter, Ripper/Scarifier Mounted
Blade, Bank Sloper
Plow, Cable
Ripper
Rear Mounted Parallel
Rear Mounted Radial
Scarifier
Splitter, Stump
58
MANUFACTURER INDEX
Attachments International, Inc.
RR#2, P.O. Box 444
Pelican Rapids, MN 56572
218-863-6444
Fax: 218-863-6446
Contact:
Gerry Henry
Renee Shores
Asphalt Cutter
Bucket Mounted
Moldboard Mounted
Ripper/Scarifer Mounted
Bucket, Excavator
Ditch Cleaning
Narrow Trench
Pavement Removal
Round
Sand/Flat Bottom
Thumb
Trapezoidal
Coupler, Quick Hitch
Fork, Log and Lumber
Paddle Top Clamp
Fork, Utility
Car Body
Construction
Lip Mounted
Over The Bucket
Grapple, Demolition
Rake, Land Clearing
Ripper, Tooth
Boom
Extendible
Forestry High Lift
Scrap Handling, Two Section
Super Long Front
Blade
Backfill
Coal
Landfill
U - Blade
Woodchip
Brush Cutter, Rotary/Flail
Bucket, Excavator
Ditch Cleaning
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Ripper
Thumb
Tilting
Bucket, Loader
Coal/Light Material
General Purpose
Grapple
High Dump
Bucket, Loader (continued)
Multipurpose
Rock, Spade Nose
Rock, Straight Edge
Side Dump
Snow/Basket
Woodchip
Cab, Riser
Coupler, Quick Hitch
Excavator
Loader
Fork, Millyard
Double Top Clamp
Fork, Utility, Pallet
Grapple
Butt and Top (log)
Demolition
Scrap/Salvage
Guarding Package, Excavator
Rake
Blade
Land Clearing
Ripper, Tooth
Snowplow, Reversible
Sweeper, Rotary Broom
Baert’s Metal Products
See Woods Equipment Co.
Bateman Manufacturing
515 Welham Rd.
Barrie, Ontario L4M 6E7
Canada
705-733-2668
Fax: 705-733-2669
Contact: Glenn Hodgkinson
59
MANUFACTURER INDEX
BLS Enterprises, Inc.
1080 Nerge Rd.
Suite 204
Elk Grove Village, IL 60007-3224
800-307-0299
847-301-0299
Fax: 847-301-0651
E-mail:
72214.573@compuserve.com
Contact: Barry Stoughton
Track Pads, Non Metallic
BRADEN/CARCO/GEARMATIC, Divisions of PACCAR
P.O. Box 547
Broken Arrow, OK 74013
918-251-8511
Fax: 918-259-1575
E-Mail: winchsales@paccar.com
Web Site: paccar.com/winch
Contact: Al Lauridsen
Winches, Hydraulic
C&P Enterprises, Inc.
8822 Apison Pike
Ooltewah, TN 37363
800-433-6404
423-396-9330
Fax: 423-396-3317
Contact: Gary D. Wilt
Bucket, Excavator
Ditch Cleaning
Plate Lip, Heavy Duty
Thumb
Campbell International, Inc.
120 W. Kent Ave
Wauconda, IL 60084
847-526-7300
Fax: 847-526-7447
Contact: James Campbell
Cab, Enclosure
60
MANUFACTURER INDEX
Caretree Systems
160 Outerbelt Street
Columbus, OH 43213
614-861-7775
800-227-3873
Fax: (614) 861-7349
E-Mail: sales@www.caretree.com
Web Site: caretree.com
Contact: Geb Keny
Spade, Tree
Central Fabricators, Inc.
P.O. Box 440
351 Alderson Street
Schofield, WI 54476-0440
800-782-5454
Fax: (715) 359-9537
E-Mail: sales@centralfab.com
Web Site: centralfab.com
Contact: Randy Strehlow
Boom, Extendible
Bucket, Excavator
Ditch Cleaning
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Round
Thumb
Bucket, Loader
Coal/Light Material
General Purpose
Coupler, Quick Hitch
Excavator
Loader
Fork, Utility, Construction
Grapple
Demolition
General Purpose
Ripper, Tooth
Snowplow, Reversible
Sweeper, Rotary Broom
Bucket, Excavator
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Thumb
Trapezoidal
Bucket, Loader
Coal/Light Material
General Purpose
Hot Slag
Bucket, Loader (continued)
Landfill
Rock, Spade Nose
Rock, Straight Edge
Snow/Basket
Woodchip
Fork, Utility
Car body
Construction
Charles Machine, Inc.
R.D. 2
P.O. Box 423
Summerville, PA 15864-9049
814-379-3706
Fax: 814-379-3531
Contact: Brian Miller
61
MANUFACTURER INDEX
Craig Manufacturing Ltd.
P.O. Box 328
20 Orser St.
Hartland, New Brunswick
Canada E0J 1N0
506-375-4493
800-267-5578
Fax: 506-375-4848
E-Mail: craigs@nbnet.nb.ca
Contact:
John W. Craig
Jay Brown
Blade
Backfill
Landfill
U-Blade
Utility Dozer
Woodchip
Boom, Extendible
Bucket, Excavator
Ditch Cleaning
Plate Lip, Heavy Duty
Thumb
Tilting
Bucket, Loader
Coal/Light Material
General Purpose
High Dump
Hot Slag
Landfill
Multipurpose
Over the Fork
Rock, Skeleton
Rock, Spade Nose
Rock, Straight Edge
Side Dump
Snow/Basket
Trash Grapple
Woodchip
Compactor, Wheel
Crane Systems, Inc.
200 Industrial Parkway
Chagrin Falls, OH 44022
216-247-0118
Fax: 216-247-0119
Contact: Tim Wilson
Custom Modifications, Excavator
Denharco, Inc.
5110 Beaudry Street
Saint-Hyacinthe, PQ
Canada J2S8A2
514-773-5454
800-567-0630
Fax: 514-773-8167
E-Mail: legault@denharco.com
Web Site: denharco.com
Contact: Roger Legault
Boom, Forestry High Lift
Delimber, Stroke
Grapple, Butt and Top
Harvester, Tree
62
Coupler, Quick Hitch
Excavator
Loader
Fork, Log and Lumber
Double Top Clamp
Log and Lumber
Paddle Top Clamp
Single Top Clamp
Fork, Millyard
Paddle Top Clamp
Fork, Utility
Car Body
Hydraulic Adjustable Tine
Pallet
Rake
Blade
Clearing and Stacking
Land Clearing
Ripper
Scarifier
Tooth
Snowplow
Airport
One Way
Reversible
V Plow
Wing Gate
Wing Mounted
MANUFACTURER INDEX
Digmor California
346 South “I” Street
Suite 22
San Bernardino, CA 92410
800-228-8224
909-381-0333
Fax: 909-381-0225
E-Mail: digmor@worldnet.att.net
Web Site: members.aol.com/therioigo/digmor.htm
Contact: Brenda Perry
Arm, Extendible
Donaldson Company
Precleaner, Air Cleaner
1400 West 94th Street
Mail station 157
Minneapolis, MN 55440-1299
800-374-1374
Fax: 612-887-3716
Contact: Sales Department
ECCO
Warning, Lights
833 W. Diamond Street
Boise, Idaho 83705-5291
888-865-9544
Fax: 800-688-3226
E-Mail: dhays@eccolink.com
Web Site: eccolink.com
Contact: Dave Hays
Engelhard Corporation
Emission, Controls
Catalytic converter
Soot traps
101 Wood Ave.
Iselin, NJ 08830-0770
800-523-3599
732-205-5460
Fax: 732-205-6146
E-Mail: dwaynejohnson@englehard.com
Web Site: engelhard.com
Contact: Dwayne Johnson
63
MANUFACTURER INDEX
Entek Manufacturing, Inc.
1512 Linda Vista Drive
San Marcos, CA 92069
760-744-8080
Fax: 760-744-1734
Contact: Rick Kroll
Bucket, Excavator
Ditch Cleaning
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Thumb
Compactor, Wheel
Coupler, Quick Hitch
Excavator
Grapple, General Purpose
Ripper, Tooth
Bucket, Excavator
Cast Lip
Coral Rock
Ditch Cleaning
Drop Center
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Ripper
Bucket, Excavator (continued)
Thumb
V-Line Frost
Coupler, Quick Hitch
Excavator
Hammer, Hydraulic
Hydraulic Kits, Excavator
Ripper, Tooth
Erlau
See Rud-Chain, Inc.
ESCO Corporation
122 East Gate Drive
Danville, IL 61834
800-446-3726
Fax: 217-446-1601
E-Mail: leephlin@escocorp.com
Web Site: escocorp.com
Contact: Luella Ephlin
Eskridge, Inc.
1900 Kansas City Road
Olathe, Kansas 66061
913-782-1238
Fax: 913-782-4206
Contact:
Tim McCall
Stan Hunt
Auger, Hydraulic
Evergreen Weigh, An SI Technologies Company
4611 South 134th Place
Seattle, WA 98168
800-255-8274
206-244-6100
Fax: 206-246-7195
E-Mail:
sitech@sitechnologies.com
Web Site: sitechnologies.com
Contact: Ann Nichols
Scale, Payload
64
MANUFACTURER INDEX
F&B
43 Washburn Street
New Bedford, MA 02740
800-847-3130
Fax: 508-991-7131
Contact: Jerry Arruda
Cutting Edge, Non Metallic
Felco Industries, Ltd.
Bucket, Excavator
Compaction (Tamping Pad
Roller)
Compaction (Vibrating
Hydraulic Plate)
Conveyor, Bedding
3660 Grant Creek Road
P.O. Box 7099
Missoula, Montana 59807
800-221-5427
406-728-9103
Fax: 406-543-4221
Contact:
Ned Haeussler
Ed Stevenson
FESCO, Division of Mathis Plow Co.
Plow, Fireline
Winch, Hydraulic
Front and Rear Mount
P.O. Box 1277
Highway 82 E.
Starkville, MS 39759
601-323-5600
Fax: 601-323-7959
Contact: Harry Tabor
Frank W. Murphy Manufacturer, Inc.
P.O. Box 470248
Tulsa, OK 74147
3131 S. Sheridan
Tulsa, OK 74145
918-627-3550
Fax: 918-664-6146
E-Mail: fwmurphy@ionet.net
Contact: David Erz
Controls/Instrumentation, Electrical
Gannon Manufacturing
See Woods Equipment Co.
65
MANUFACTURER INDEX
Geith, Inc.
22721 Airpark Drive
Petersburg, VA 23803
804-733-2183
Fax: 804-733-3669
Web site: geith.com
Contact: Brandon English
Blade
Backfill
Loader
Bucket, Excavator
Cast Lip
Clam Shell
Ditch Cleaning
Jaw
Narrow Trench
Pavement Removal
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Tilting
Trapezoidal
Thumb
Bucket, Loader
General Purpose
High Dump
Hot Slag
Genesis Equipment & Manufacturing, Inc.
1000 Genesis Drive
Superior, WI 54880
888-743-2748
Fax: 715-395-5255
Contact: Kevin Bakke
Shear
Hydraulic Mobile
Grapple
Demolition
General Purpose
Orange Peel
Scrap/Salvage
Processor, Universal
Gregory Manufacturing Company
P.O. Box 269
506 Oak Road
Lewiston, NC 27849
919-348-2531
800-233-4734
Fax: 919-348-2400
Contact: Mike Greene
Brush Cutter, Rotary/Flail
66
Bucket, Loader (continued)
Multipurpose Rock, Spade
Nose
Rock, Straight Edge
Woodchip
Concrete, Pulverizer
Coupler, Quick Hitch
Excavator
Loader
Fork, Log and Lumber
Log and Lumber
Grapple
Demolition
General Purpose
Orange Peel
Scrap/Salvage
Ripper, Tooth
Shear, Hydraulic Mobile
MANUFACTURER INDEX
Guest Industries, Inc.
3601 Winsted Road
Torrington, CT 06790-2297
860-482-1118
800-243-5390 (outside CT)
Fax: 860-489-6336
Contact: Gary Guest
Asphalt Cutter
Bucket Mounted
Ripper/Scarifier Mounted
Blade, Backfill
Compaction, Wheel
Fork, Utility
Car Body
Fork, Utility (continued)
Lip Mounted
Over-the-Bucket
Pallet
Hammer, Hydraulic
Ripper, Tooth
Snowplow, Lip Mounted
Hendrix Manufacturing
P.O. Box 919
Mansfield, LA 71052
318-872-1660
Fax: 318-872-1508
E-Mail: khawkins@prysm.net
Contact:
Keith Hawkins
Mike Lynch
Bucket, Excavator
Cast Lip
Ditch Cleaning
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Compactor, Wheel
Coupler, Quick Hitch
Excavator
Ripper, Tooth
Henke Manufacturing Corporation
3070 Wilson
P.O. Box 709
Levenworth, KS 66048
913-682-9000
Fax: 913-682-0300
Contact: Bob Lacy
Blade
Loader
Utility Dozer
Bucket, Loader
Snow/Basket
Coupler, Quick Hitch
Grader
Ripper, Scarifier
Snowplow
Airport
Reversible
V Plow
Wing Mounted
Bucket, Excavator
Cast Lip
Coral Rock
Ditch Cleaning
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Round
Thumb
V Line Frost
Bucket, Loader
Coal/Light Material
General Purpose
Rock, Spade Nose
Rock, Straight Edge
Compaction, Wheel
Coupler, Quick Hitch
Excavator
Grapple, Demolition
Ripper, Tooth
Hensley Attachments
800 South 5th Street
Mansfield, TX 76063
817-477-3167
800-433-3144
Fax: 817-477-3646
Contact: Rick Campbell
67
MANUFACTURER INDEX
Hester Plow Company
P.O. Box 340
East Washington
Lake City, FL 32056-0340
904-755-0960
Fax: 904-755-0961
Contact: Jack Shepard
Plow, Fireline
HKX, Inc.
P.O. Box 1600
17404 147th St. SE
Suite K
Monroe, WA 98272
360-805-8600
800-493-5487 (800-HYDKITS)
Fax: 800-353-5736
Web Site: hkx.com
Contact: Chuck Morgan
Hydraulic Kits, Excavator
Plumbing and control kits available for the following:
Brush Cutter
Bucket Tilt
Compactor
Custom Applications
Grapple/Dual Function Rotate
Hammer Kit (Standard and Low Back Pressure)
Multiple Function
Thumb Kit
INDECO
120 Dodge Avenue
Stratford, CT 06497
203-377-7791
Fax: 203-377-7796
E-Mail: indeco1@aoL.com
Contact: Greg Henry
Compactor, Vibratory Plate
Concrete
Crusher
Pulverizer
Hammer, Hydraulic
68
MANUFACTURER INDEX
Industrial Machinery Attachment Co. (IMAC)
6400 30th Street
Edmonton, Alberta
Canada T6P 1J6
403-469-9185
Fax: 403-469-9256
E-Mail: tjs@imac.ca
Web Site: imac.ca
Contact:
Don Wilson
Tim Stubbs
Asphalt Cutter, Bucket Mounted
Barrel Handler, Loader
Blade
Backfill
Coal
Landfill
Loader
U-Blade
Utility Dozer
Woodchip
Boom, Extendible
Brush Cutter, Rotary/Flail
Bucket, Excavator
Cast Lip
Clam Shell
Ditch Cleaning
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Thumb
Tilting
Trapezoidal
V-Line Frost
Bucket, Loader
Coal/Light Material
General Purpose
Grapple
High Dump
Multipurpose
Rock, Skeleton
Rock, Spade Nose
Rock, Straight Edge
Side Dump
Snow/Basket
Woodchip
Cab, Riser
Coupler
Quick Hitch, Excavator
Quick Hitch, Loader
Quick Hitch, Grader
Rail Car
7943 Webster Road
Delta, B.C. Canada
V4G 1E4
604-940-9755
Fax: 604-940-9759
E-Mail: ksm@imac.ca
Contact:
Ken Mueller
Brian Wilson
69
Fairlead, For Winches
Fork, Log and Lumber
Double Top Clamp
Log and Lumber
Paddle Top Clamp
Fork, Millyard
Double Top Clamp
Paddle Top Clamp
Fork, Utility
Construction
Over the Bucket
Pallet
Pipe/Pole Grapple
Grapple
Butt and Top
Butt Type (log)
Bypass Type (log)
Heelboom
Straddle Mount Grapple
Guarding Package
Excavator
Loader and Dozer
Rake
Blade
Clearing and Stacking
Ripper
Scarifier
Tooth
Snowplow
Reversible
V Plow
Wing Gate
Wing Mounted
Sweeper, Rotary Broom
MANUFACTURER INDEX
Jewell Manufacturing, Inc.
5525 S.E. 28th Ave.
Portland OR 97202
503-230-0456
Fax: 503-230-1101
E-Mail: jewellmfg@aol.com
Contact:
Jim KirkPatrick
Steve McDowell
Boom
Log Loading
Scrap Handling, Three Section
Scrap Handling, Two Section
Super Long Front
Bucket, Excavator
Clam Shell
Thumb
Cab, Riser
Grapple
Bypass type (log)
General Purpose
Heelboom
Straddle Mount Grapple
Guarding Package, Excavator
Rake, Land Clearing
Shear, Stump
Blade
Land Clearing
Loader
Boom, Extendible
Bucket, Excavator
Tilting
Bucket, Loader
Coal/Light Material
General Purpose
Grapple
Multipurpose
Rock, Skeleton
Rock, Spade Nose
Rock, Straight Edge
Side Dump
Snow/Basket
Compactor, Wheel
Concrete
Crusher
Pulverizer
Coupler, Quick Hitch
Excavator
Loader
Fork, Log and Lumber
Double Top Clamp
Log and Lumber
Fork, Log and Lumber (continued)
Paddle Top Clamp
Single Top Clamp
Fork, Millyard
Paddle Top Clamp
Fork, Utility
Car Body
Construction
Pallet
Pipe/Pole Grapple
Grapple
Demolition
General Purpose
Guarding Package
Excavator
Loader and Dozer
Hammer, Hydraulic
Rake
Clearing and Stacking
(w/ and w/o clamps)
Loader (w/ and w/o clamps)
Ripper, Tooth
Shear, Hydraulic Mobile
Snowplow, Reversible
Sweeper, Rotary Broom
JRB Company, Inc.
820 Glaser Parkway
Akron, OH 44306
330-734-3000
800-428-2538 (800-4-BUCKET)
Fax: 330-734-3018
E-mail: ptheiss@jrbco.com
Web Site: www.jrbco.com
Contact: Paula Theiss
Kenco, Inc.
P.O. Box 576
Ligonier, PA 15658-0576
800-653-6069
Fax: 412-238-3187
Contact: Bill Douglas
Fork, Utility
Over The Bucket
Grapple
Barrier Lifting
70
MANUFACTURER INDEX
Kent Demolition Tool
711 Lake St.
Kent, OH 44240
800-527-2282 (outside OH)
330-673-5826
Fax: 330-677-1616
Web site: kentdemolition.com
Contact:
Joe Burger
Jeff Crane
Compactor, Vibratory Plate
Hammer, Hydraulic
Kim Hotstart Mfg. Co., Inc.
Starting Aids, Cold Weather
5723 E. Alki
P.O. Box 11245
Spokane WA 99211-0245
509-534-6171
Fax: 509-534-4216
Fax: 800-224-5550
Web site: kimhotstart.com
Contact: Mike Floyd
LaBounty Manufacturing
100 State Road 2
Two Harbors, MN 55616
800-522-5059
218-834-2123
Fax: 218-834-3879
Contact:
Uwe Kausch
Matt Mahoney
Barrel Handler, Excavator
Concrete,
Crusher
Pulverizer
Coupler, Quick Hitch
Excavator
Grapple
Demolition
General Purpose
Scrap/Salvage
Lake Superior Cabs, Inc.
118 W. Harney Road
Esko, MN 55733
800-328-1823
Fax 218-879-4640
Contact:Dean Myers
Cab, Enclosure
71
Shear
Hydraulic Mobile
Railroad Rail Processor
Stump
Processor, Universal
MANUFACTURER INDEX
Laser Alignment, Inc.
2850 Thornhills S. E.
Grand Rapids, MI 49546
800-452-7377
616-949-7430
Fax 616-949-6975
E-Mail: marketing@laseralignment.com
Web Site: laseralignment.com
Contact: Bob Ford
Grade Control, Laser
Lincoln Industrial
One Lincoln Way
St. Louis, MO 63120
314-679-4429
Fax: 314-679-4357
Fax: 800-424-5359
E-Mail: mlorenz@lincolnindustrial.com
Web Site: lincolnindustrial.com
Contact: Steve Coburn
Lubrication System, Central
Little Falls Machine, Inc.
305 South West Third St.
Little Falls, MN 56345
320-632-9266
Fax: 320-632-3484
Web Site: fallsplows.com
Contact:
Jim Owens (Minnesota & West )
Pete Doherty (Wisconsin & East)
Blade, Utility Dozer
Coupler, Quick Hitch
Ripper, Scarifier
Snowplow
Airport
One Way
Reversible
V Plow
Wing Mounted
Load Rite North America
P.O. Box 1139
Burch Prairie, WA 98606-1139
360-750-5821
Fax: 360-750-5843
E-Mail: RWHALEY@PACIFIER.com
Contact: Russ Whaley
Scale, Payload
72
MANUFACTURER INDEX
Lowe Manufacturing Co., Inc.
Box 275
Readstown, WI 54652
800-356-9180
608-629-5101
Fax 608-629-5666
E-Mail: lowe@mwt.net
Auger, Hydraulic
LubriQuip, Inc.
18901 Cranwood Parkway
Cleveland, OH 44128
800-872-5823
216-581-2000
Fax: 216-581-8945
E-Mail: lubriquip@lubriquip.com
Web Site: lubriquip.com
Contact: Ray Teti
Lubrication System, Central
Mann Corporation
Bucket, Excavator
Thumb
Coupler, Quick Hitch
Excavator
Grapple
Demolition
General Purpose
P.O. Box 478
Granite Falls, WA 98252
800-688-MANN
360-691-5100
Fax: 360-691-6134
E-mail:
manncorp@accessone.com
Web site: manncorp.com
Contact: Dan Meyer
McMillen Construction Equipment Attachments
4419 Ardmore Ave.
Ft. Wayne, IN 46809-9723
800-234-0964
219-747-6750
Fax: 219-747-9161
Contact: Matt Willman
Auger, Hydraulic
73
Rake
Blade
Bucket
Clearing and Stacking
(w/ and w/o clamps)
Ripper, Tooth
Shear, Stump
MANUFACTURER INDEX
Medford Fabrication
1109 Court St.
P.O. Box 1588
Medford, OR 97501-0244
800-547-5950
541-779-1970
Fax: 541-779-1976
E-Mail: medfab@medfab.com
Contact: David Thorndike
Fork, Log and Lumber
Double Top Clamp
Peeler Block
Fork, Millyard
Paddle Top Clamp
Fork, Utility
Pallet
Pipe/Pole Grapple
Morbark
8507 S. Winn Road
P. O. Box 1000
Winn, MI 48896
800-233-6065
517-866-2381
Fax: 517-866-2280
E-Mail: morbark@worldnet.att.net
Web Site: morbark.com
Contact: Lucky Robison
Feller Buncher
With Saw Head
With Shear
New Dymax, Inc.
P.O. Box 297
402 Miller Drive
Wamego, KS 66547
785-456-2081
800-530-5407
Fax: 785-456-8328
Contact: Derek Diederich
Bale Clamp, Hydraulic
Boom, Extendible
Bucket, Excavator
Ditch Cleaning
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Thumb
Bucket, Loader
Coal/Light Material
General Purpose
Grapple bucket
High Dump
Multipurpose
Rock, Spade Nose
Rock, Straight Edge
Snow/Basket
Woodchip
74
Coupler, Quick Hitch
Excavator
Loader
Fork, Utility
Pallet
Rippers
Rear Mounted Radial
Scarifier
Snowplow
Reversible
V Plow
MANUFACTURER INDEX
NPK Construction Equipment, Inc.
7550 Indpendence Dr.
Walton Hills, OH 44146
800-225-4379
216-232-7900
Fax: 216-232-4382
Contact:
Joe Obergast
Roni Bobnar
Tiffany Thomason
Compactor, Vibratory Plate
Concrete, Crusher
Hammer, Hydraulic
Grapple, General Purpose
Shear, Hydraulic Mobile
Processor, Universal
Ohio Magnetics, Inc.
Magnet, Scrap Handling
5400 Dunham Road
Maple Heights, OH 44137-3687
216-662-8484
800-486-6446
Fax: 216-662-2911
Contact:
Walter Civovic
Mark Fulkerson
O.S. Walker
Magnet, Scrap Handling
Rockdale Street
Worchester, MA 01606
800-962-4638
Fax: 508-852-8649
E-Mail: info@walkermagnet.com
Web Site: www.walkermagnet.com
Contact: James A. Butke
Pacific Services Manufacturing, Inc. (PSM)
8502 Maltby Rd.
Woodinville, WA 98072
800-373-3514
425-486-1232
Fax: 425-486-0803
Contact:
Paul Raine
Mike Rinabarger
Jan Tressner
Brenda Morantes
Jill Colon
Boom, Log Loading
Bucket, Excavator
Clam Shell
Ditch Cleaning
Plate Lip, Heavy Duty
Thumb
Bucket, Loader
Coal/Light Material
General Purpose
Rock, Spade Nose
Woodchip
Compactor, Vibratory Plate
75
Coupler, Quick Hitch
Excavator
Loader
Fork, Millyard
Double Top Clamp
Paddle Top Clamp
Fork, Utility
Pallet
Grapple
Heelboom
Guarding Package, Excavator
Rake
Land Clearing
MANUFACTURER INDEX
Paul Wever Construction Equipment Co., Inc.
P.O. Box 85
Junction I-74 & Rte.117
Goodfield IL. 61742
800-990-PWCE
309-965-2005
Fax: 309- 965-2905
Contact: Paul Imm
Arm, Extension
Custom Modifications/Special Attachments
Ride Control, Loader
Pemberton, Inc.
P.O. Box 521000
Longwood, FL 32752-1000
800-393-6688
Fax: 407-831-7995
Contact: Sales Department
Arm, Rotating
Barrel Handler, Excavator
Blade, Loader
Boom, Extendible
Bucket, Excavator
Cast Lip
Clam Shell
Ditch Cleaning
Drop Center
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Ripper
Thumb
Tilting
Trapezoidal
Bucket, Loader
Coal/Light Material
General Purpose
Grapple
High Dump
Landfill
Multipurpose
Side Dump
Rock, Skeleton
Rock, Spade Nose
Rock, Straight Edge
Trash Grapple
Woodchip
76
Concrete, Crusher
Coupler
Quick Hitch, Excavator
Quick Hitch, Loader
Rail Car
Fork, Log and Lumber
Double Top Clamp
Log and Lumber
Paddle Top Clamp
Single Top Clamp
Fork, Millyard
Paddle Top Clamp
Fork, Utility
Car Body
Grapple
Demolition
General Purpose
Orange Peel
Rake
Clearing and Stacking
(w/ and w/o clamps)
Land Clearing
Loader (w/ and w/o clamps)
Ripper, Tooth
Shear
Hydraulic Mobile
Stump
MANUFACTURER INDEX
Pierce Pacific Manufacturing, Inc.
P.O. Box 1009
Tualatin, OR 97062
800-760-3270
503-620-9880
Fax: 503-620-9885
Contact:
Dave Eheler
Jerry Clausen
John Evens
Boom, Excavator
Log Loading
Scrap Handling, Three
Section
Scrap Handling, Two Section
Super Long Front
Bucket, Excavator
Clamshell
Cab, Riser
Delimber, Stroke
Grapple, Excavator
Bypass Type (log)
Heelboom
Orange Peel
Scrap/Salvage
Guarding Package, Excavator
Harvester, Tree
Leveler, Turntable
Undercarriage, Rubber Tired
Bucket, Excavator
Clamshell
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Bucket, Loader
Demolition
Rock, Skeleton
Rock, Spade Nose
Rock, Straight Edge
Grapple
Demolition
Scrap/Salvage
Pro-Line/Anvil Attachments
16650 Buffalo Speedway
Houston, TX 77047
713-991-8500
800-354-7795
800-335-4722
Fax: 713-991-8555
E-Mail: buckets@pro-line.com
Web Site: www.pro-line.com
Contact: Larry Carlisle
Progressive Attachments Corporation (PAC)
P.O. Box 1229
Granite Falls, WA 98252
800-887-4999
Fax: 888-329-8486
Web site: p-a-c.com
Contact: Greg Hickman
Bucket, Excavator
Plate Lip
Thumb
Coupler, Quick Hitch
Excavator
Grapple, General Purpose
Rammer, Inc.
345 Patton Dr. S.W.
Atlanta, GA 30336
404-505-0005
800-248-9776
Fax: 404-505-0029
Contact: Rick Piper
Compactor, Vibratory Plate
Concrete
Crusher
Pulverizer
Hammer, Hydraulic
77
Rake, Excavator
Bucket
Land Clearing
Ripper, Tooth
MANUFACTURER INDEX
Risley Equipment Ltd.
9024 108 St.
Grand Prairie, A.B.
Canada T8V 4C8
403-532-3282
Fax: 403-538-1808
Contact: Chris Blackmore
Brush Cutter, Rotary/Flail
Delimber, Stroke
Feller Buncher, With Saw Head
Grapple, Butt and Top
Guarding Package
Excavator
Loader and Dozer
Harvester, Tree
Rockland Manufacturing Co.
P.O. Box 5
Bedford Industrial Park
Bedford, PA 15522
800-458-3773
814-623-1115
Fax: 814-623-7214
Contact:
Tim Davis
Bob Shaffer
Asphalt Cutter, Bucket Mounted
Blade
Backfill
Bank Sloper
Coal
Land Clearing
Landfill
Loader
U-Blade
Utility Dozer
Woodchip
Boom, Extendible
Bucket, Excavator
Cast Lip
Ditch Cleaning
Pavement Removal
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Thumb
Tilting
Trapezoidal
Bucket, Loader
Coal/Light Material
Demolition
Ejector
General Purpose
Grapple
High Dump
Hot Slag
Landfill
Multipurpose
Over the Fork
Rock, Skeleton
Rock, Spade Nose
Rock, Straight Edge
Snow/Basket
Woodchip
78
Compactor, Wheel
Concrete, Crusher
Coupler, Quick Hitch
Excavator
Loader
Fork, Log and Lumber
Log and Lumber
Paddle Top Clamp
Single Top Clamp
Fork, Millyard
Double Top Clamp
Paddle Top Clamp
Fork, Utility
Car Body
Construction
Lip Mounted
Over the Bucket
Pallet
Pipe/Pole Grapple
Grapple
Demolition
General Purpose
Rake
Blade
Clearing and Stacking
(w/ and w/o clamps)
Loader (w/ and w/o clamps)
Ripper, Tooth
Shear, Stump
Snowplow
One Way
Reversible
V Plow
Wing Mounted
MANUFACTURER INDEX
R.P.M. Tech, Inc.
184, Rte. 138
Cap Sante, P.Q.,
Canada GOA 1LO
800-463-3882
418-285-1811
Fax: 418-285-4289
E-mail: admin@rpmtech.qc.ca
Web Site: www.rpmtech.qc.ca
Contact: Guy Bourdeau
Snow Blower, Loader
Rud Chain, Inc.
1300 Stoney Point Rd. S.W.
P.O. Box 8145
Cedar Rapids, Iowa 52408
800-553-7993
319-390-4040
Fax: 319-390-3342
E-Mail: rdchain2@inav.net
Web Site: rudchain.com
Contact: John Rodemeyer
Chains, Tire
Rylind Industries, Inc.
7345 So. Pierce St.
Littleton, CO 80123
303-979-3548
Fax: 303-979-4730
Contact:
Greg Walda
Dean Maughan
Blade
Loader
Boom, Extendible
Bucket, Loader
Coal/Light Material
General Purpose
Grapple
High Dump
Multipurpose
Rock, Spade Nose
Side Dump
Coupler, Quick Hitch
Grader
Loader
Sabine
See ACS Industries, Inc.
79
Fork, Log and Lumber
Double Top Clamp
Paddle Top Clamp
Fork, Utility
Car Body
Construction
Rake
Loader (w/ and w/o clamps)
Ripper, Scarifier
Snowplow
Airport
One Way
Reversible
V plow
Wing Mounted
MANUFACTURER INDEX
SETCO, Solid Tire & Rim (Southeast Tire, Inc.)
P. O. Box 809
1600 Seminole
Idabel, OK 74745
580-286-6531 (Oklahoma)
800-634-2381
Fax: 580-286-6743
Contact: Sharon Birdsong
Cutting Edge, Non Metallic
Tire, Solid
Spectra Precision, Inc.
5475 Kellenburger Road
Dayton, OH 45424-1099
800-538-7800
937-233-8921
Fax: 937-233-7511
E-Mail: pkaz@me2.splp.com
Web Site: spectraprecision.com
Contact: Pete Kaz
Grade Control, Laser
Stanley Hydraulic Tools
Compactor, Vibratory Plate
Hammer, Hydraulic
3810 S.E. Naef Rd.
Milwaukie OR 97267
503-659-5660
Fax: 503-652-1780
Contact: Larry Pillers
Superior Tire and Rubber Corporation
P.O. Box 308
1818 Pennsylvania Ave West
Warren, PA 16365
814-723-2370
800-289-1456
Fax 814-726-0740
E-Mail: superior@penn.com
Contact:
Bill LeMeur
Dave Manning
Scott Holcomb
Cutting Edge, Non Metallic
Track Pads, Non Metallic
80
MANUFACTURER INDEX
Sure Power Industries, Inc.
10189 S.W. Avery
Tualatin, OR 97062
800-845-6269
503-692-5360
Fax: 503-692-9091
Contact:
Carl Smith
Gareth Gilpin
Converter, Electrical
Warning, Lights
Sweepster, Inc.
2800 N. Zeeb Road
Dexter, MI 48130-9797
800-456-7100
734-996-9116
Fax: 734-996-9014
E-Mail: sweep@sweepster.com
Web Site: www.sweepster.com
Contact:
Kathy Grau
Doug Amerman
Sweeper
Bucket Pick Up
Rotary Broom
Sy-Klone Company
P.O. Box 550859
Jacksonville, FL 32255-0859
904-448-6563
800-351-8265
Fax: 904-448-6626
Contact: Robin Thomson
E-Mail: robin@sy-klone.com
Web Site: sy-klone.com
Precleaner, Air Cleaner
Teledyne Specialty Equipment CM Products, Inc.
30625 Solon Industrial Pkwy.
Cleveland, OH 44139
440-248-7168
Fax: 440-248-8645
Contact: Frank Cargould
Compactor, Vibratory Plate
Concrete
Crusher
Pulverizer
Hammer, Hydraulic
Processor, Universal
Shear, Hydraulic Mobile
81
MANUFACTURER INDEX
Tink, Inc.
2361 Durham Dayton Hwy
Durham, CA 95938
800-824-4163
530-895-0897
Fax: 530-895-0751
Contact: Roy Farrell
Bucket, Loader
Grapple
High Dump
Trash Grapple
Tramac Corporation
26 Eastmans Rd.
Parsippany, NJ 07054
800-526-3837
973-887-7700
Fax: 973-887-7784
E-Mail: value@tramac.com
Web Site: tramac.com
Contact: Gary Hesseltine
Compactor, Vibratory Plate
Concrete
Crusher
Pulverizer
Hammer, Hydraulic
Pile Driver, Vibratory
Processor, Universal
Shear, Hydraulic Mobile
TREE TOW (Brigden Manufacturing, Inc.)
Grapple, Crawler
Basket Bunching Head
Straddle Mount Grapple
Tong Head
Bay # 4, 101 Spears Road
Quesnel, B.C., Canada
V2J-4Z3
800-665-2530
250-992-3710
Fax: 250-992-3841
E-Mail: treetow@uniserve.com
Contact: Alex Brigden
Turbo Industries
6501 Barberton Avenue
Cleveland, OH 44102
216-281-7810
Fax: 216-281-2077
Contact: Frank Sanabria (ext. 152)
Precleaner, Air Cleaner
82
MANUFACTURER INDEX
Valk Manufacturing Co.
P.O. Box 218
Carlisle, PA 17013
717-766-0711
Fax: 717-697-6297
Contact:
Tim Fry - Blades
Dan Cribari - Snow Plows
Cutting Edge, Non Metallic
Snowplow
Airport
One Way
Reversible
V Plow
Viking Cives, Inc.
R.R. #2 Box 36 1/2
Harrisville, NY 13648
315-543-2321
Fax: 315-543-2366
Contact: Ron Burns
Cutting Edge, Non Metallic
Snowplow
Airport
One Way
Wing Mounted
Wain Roy
See Woods Equipment Co.
Ware Machine Works, Inc.
P.O. Box 390
Ware, MA 01082
413-967-6291
Fax: 413-967-7008
Contact: Normand R. Breton
Backhoe, Hydraulic
83
MANUFACTURER INDEX
Weldco-Beales Manufacturing Ltd.
U.S.A.
2328 Roosevelt Avenue
Enumclaw, WA
98022-008
800-547-6357
360-825-3581
Fax: 360-825-4009
E-Mail: weldco@concentric.net
Web Site: weldco-beales.com/
Contact: Sales Department
Arm, Extension
Barrel Handler, Loader
Boom
Extendible
Forestry, High Lift
Log Loading
Scrap Handling, Three Section
Scrap Handling, Two Section
Super Long Front
Brush Cutter
Bucket, Excavator
Cast Lip
Clam Shell
Ditch Cleaning
Drop Center
Plate Lip, Heavy Duty
Thumb
Tilting
Trapezoidal
V-Line Frost
Bucket, Loader
Coal/Light Material
Demolition
General Purpose
Grapple
High Dump
Multipurpose
Over the Fork
Rock, Skeleton
Rock, Spade Nose
Rock, Straight Edge
Side Dump
Snow/Basket
Blade
Backfill
Bank Sloper
Coal
Land Clearing
Landfill
Loader
U-Blade
Utility Dozer
Woodchip
Cab, Riser
Coupler, Quick Hitch
Excavator
Loader
Grader
Canada
12155-154 Street
Edmonton, Alberta
Canada T5V 1J3
403-454-5244
800-661-4155
Fax: 403-455-6770
E-Mail: shindel@compusmart.ab.ca
Contact: Doug Schindel
84
Fairlead, For Winches
Crawler
Loader
Fork, Log and Lumber
Double Top Clamp
Log and Lumber
Single Top Clamp
Fork, Millyard
Double Top Clamp
Paddle Top Clamp
Fork, Utility
Construction
Pallet
Pipe/Pole Grapple
Grapple
Butt and Top
Butt Type (log)
Bypass Type (log)
General Purpose
Heelboom
Orange Peel
Scrap/Salvage
Guarding Package
Excavator
Loader and Dozer
Rake
Blade
Clearing and Stacking
(w/ and w/o clamps)
Land Clearing
Loader (w/ and w/o clamps)
Ripper
Rear Mounted Parallel
Scarifier
Tooth
Shears
Hydraulic Mobile
Stump
Snowblower, Loader
Snowplow
One Way
Reversible
V Plow
Wing Gate
Wing Mounted
Splitter, Stump
MANUFACTURER INDEX
Werk-Brau Company, Inc.
616 N. Blanchard
Findlay, OH 45839
800-537-9561
419-422-2912
Fax: 419-422-7207
E-Mail: wbsales@bright.net
Contact: Joe Blem
Arm, Extension
Boom, Extendible
Bucket, Excavator
Cast Lip
Coral Rock
Ditch Cleaning
Drop Center
Pavement Removal
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Sand/Flat Bottom
Thumb
Tilting
Trapezoidal
V-Line Frost
Bucket, Loader
Coal/Light Material
General Purpose
Grapple
Multipurpose
Rock, Skeleton
Rock, Spade Nose
Rock, Straight Edge
Snow/Basket
Compactor, Wheel
Coupler, Quick Hitch
Excavator
Loader
Fork, Log and Lumber
Double Top Clamp
Paddle Top Clamp
Fork, Utility
Car Body
Construction
Over the Bucket
Grapple
Demolition
General Purpose
Scrap/Salvage
Rake
Land Clearing
Loader (w/o clamps)
Ripper, Tooth
Bucket, Loader
Coal/Light Material
General Purpose
Over the Fork
Woodchip
Fork, Log and Lumber
Double Top Clamp
Log and Lumber
Paddle Top Clamp
Single Top Clamp
Fork, Millyard
Double Top Clamp
Paddle Top Clamp
Fork, Utility
Car Body
Construction
Pallet
Pipe/Pole Grapple
Wicker Machine Company
1400 East Ave. North
Hollandale, MS 38748
800-748-9476
601-827-5434
Fax: 601-827-7800
Contact: Allan Wicker
85
MANUFACTURER INDEX
Woods Equipment Company
P.O. Box 1000
Oregon, IL 61061
800-319-6637 (800-31-WOODS)
Fax: 800-399-6637
Web Site: www.woodsonline.com
Contact: Dealer Services
Bucket, Excavator
Ditch Clearing
Jaw
Plate Lip, Heavy Duty
Plate Lip, Standard Duty
Ripper
Thumb
Coupler, Quick Hitch
Excavator
Grapple, Demolition
Ripper, Tooth
Blade
Coal
Landfill
Loader
U-Blade
Woodchip
Boom
Log Loading
Scrap Handling, Three Section
Scrap Handling, Two Section
Super Long Front
Bucket, Excavator
Clam Shell
Ditch Cleaning
Cab, Riser
Fork, Millyard
Double Top Clamp
Grapple
Butt and Top
Butt Type (log)
Bypass Type (log)
General Purpose
Heelboom
Orange Peel
Scrap/ Salvage
Guarding Package, Excavator
Young Corporation
3231 Utah Ave. South
P. O. Box 3522
Seattle, WA 98124
800-321-9090 (Except WA )
206-624-1071
Fax: 206-682-6881
Contact: Randy Johnson
86
NOTES
NOTES
NOTES
AESG216-00
Printed in USA
D-4/98(7.5M)
4/98 (EV-1)
Komatsu America International Company
440 N. Fairway Dr., Vernon Hills, IL 60061
www.KomatsuAmerica.com
Materials and specifications are subject to change without notice
is a trademark of Komatsu Ltd. Japan