VA2200 – Vivato 802.11b Indoor Wi

ENVIRONMENTAL
Temperature
0° C to 55° C (32° F to 131° F) - Operating
-40° C to 70° C (-40° F to 158° F) - Storage
Humidity
95% non-condensing typical
CERTIFICATIONS
Radio – FCC Part 15.247
Industry Canada RSS210
PRODUCT WARRANTY
One year limited warranty
PRODUCT ACCESSORIES
POWER SUPPLIES
Part Number
Single port PoE injector
VA2200-SPEI
Vivato single port PoE injector
EU Power Supply
VA2200-EUPS
Two prong power supply
UK Power Supply
VA2200-UKPS
Three prong power supply
CERTIFIED THIRD-PARTY HIGH-GAIN AND DIRECTIONAL ANTENNAS
* Note: Vivato does not sell the following antennas, but has certified them for use with the VA2200
Product Name
Horizontal Omni Antennas (Indoor/Outdoor)
Superpass
Superpass
Superpass
Vertical Omni Antennas (Indoor/Outdoor)
Superpass
Superpass
MaxRad
Vertical Omni Antennas (Indoor)
Maxrad
Vertical Omni Antennas (Outdoor)
Maxrad
Maxrad
Product Description
2.4 GHz, 8.5dBi Horizontally polarized Omni
2.4GHz, 5.5dBi, Horizontally polarized Omni
2.4GHz, 3.2dBi, Horizontally polarized Omni
Benefits
• Dual radio architecture enables wireless backhaul from locations that are difficult or
costly to wire.
• RP-TNC connectors allow the use of different antenna options for optimal deployment
coverage adaptability and flexibility
• High performance processing for dual radio operation supporting up to 100
simultaneous users
• Vivato devices interoperate with any Wi-Fi approved vendors’ wireless PC cards, PCI
adapters, and USB adapters to provide wireless access to the Internet, to email, and to
corporate networks offering seamless integration with any existing wired network
• Offering superior performance and price, the Vivato solution is VPN compatible, allowing
mobile travelers to access their corporate Intranets through the use of Virtual Private
Networks (VPNs)
2.4 GHz ISM 5.2 dBi Ceiling Mount Omni, 36" pigtail with
RPTNC connector
Maxrad
Maxrad
Maxrad
Directional Yagi Antenna (Indoor/Outdoor)
MaxRad
2.4 GHz 10 dBi, Enclosed YAGI 18" pigtail RPTNC connector
headquarters
1820 gateway drive
suite 300
san mateo, ca 94404
phone 1-866-802-1600
intl. phone +1 650-227-0490
www.vivato.com
The Vivato 802.11b Indoor Wi-Fi AP/Bridge is a powerful and flexible multi-functional device.
The dual 200mW radio architecture combined with advanced software features creates a
robust platform at an economical price.
2.4 GHz 6.5 dBi Omni, N-connector
2.4 GHz 4.5 dBi Omni, N-connector
2.4 GHz ISM 11 dBi Mast Mount Omni, 18" pigtail, RPTNC connector
2.4 - 2.5GHz 4dBi Omni directional antenna, N connector
2.4 GHz ISM 5.2 dBi Mast Mount Omni, 36" pigtail with
RPTNC connector
2.4-2.5GHz 10dBi Omni directional antenna, RPTNC connector
2.4-2.5GHz 8dBi Omni directional antenna, N connector
2.4-2.5GHz 6dBi Omni directional antenna, N connector
Panel Antenna (Indoor/Outdoor)
MaxRad
VA2200 – Vivato 802.11b Indoor Wi-Fi AP/Bridge
Functionality
The AP/Bridge can function as either an independent access device or as a part of the Vivato
Wi-Fi System. When used in conjunction with the Vivato Base Station, the AP/Bridge can fill
RF holes, increase capacity or extend range, creating a comprehensive system for large area
WiFi coverage.
2.4 GHz ISM, 8 dBi, XF panel antenna RG58/U Type pigtail
(12 inch), RPTNC connector
research and development
12610 e. mirabeau parkway
suite 900
spokane, wa 99216
phone 509-343-6001
© 2004 vivato, inc. all rights reserved. all specifications are subject to change without notice.
gfd / 11 / 2004
VA2200 – Vivato 802.11b
Indoor Wi-Fi AP/Bridge
Adaptability
In the dual-radio architecture, each radio provides single- or dual-mode operation. Singlemode allows one radio to operate as a dedicated wireless-to-wireless bridge via WDS
(Wireless Distribution System), while the other radio operates as a dedicated access point
(AP) to standard 802.11b clients. Dual-mode allows each individual radio to operate both
WDS and AP mode simultaneously. WDS functionality enables a low-cost backhaul solution
extending networks in locations that are difficult or costly to wire. Additionally, Vivato has
certified several third party high-gain and directional antennas to adapt to any deployment
environment.
WIRELESS SPECIFICATIONS
Network Standard
802.11b – DSSS (Direct Sequence Spread Spectrum)
Frequency band/Operating Channels
2.4 – 2.483 GHz, IEEE North America Channel Set (1-11)
WLAN Architecture
802.11 infrastructure – ESS, Wireless Distribution System (WDS)
Supported Data Rates
802.11b: 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps, rate auto-fallback
Media Access Control
Collision Sensing Multiple Access/Collision Avoidance
(CSMA/CA)
Receive Sensitivity
Receive Sensitivity @ FER=.08
11 Mbps (CCK): -85 dBm
5.5 Mbps (CCK): -88 dBm
2 Mbps (DQPSK): -89 dBm
1 Mbps (DBPSK): -90 dBm
Operating Range – Open Environment
(~22.5dBm output power)
11 Mbps: 890-1,470ft (300-450m) 2 Mbps: 1,640-2,460ft (500-750m)
5.5 Mbps: 1,310-1910ft (400-600m) 1Mbps: 2,625-3930ft (800-1200m)
Operating Range – Office Environment
(~22.5dBm output power)
11 Mbps: 150-190ft (45-60m) 2 Mbps: 200-255ft (60-75m)
5.5 Mbps: 185-235ft (55-70m) 1 Mbps: 230-295ft (70-90m)
Users per device
Up to 100 simultaneous users
Transmit Power
~22.5dBm
Antennas
Two 2.2dBi omni-directional antennas
VP2200 Base Station
Warehouse
In a hybrid deployment with the VP2200
Base Station, VA2200 Pico-Cells increase
bandwidth in high demand areas.
Use VA2200 Pico-Cells to fill coverage
gaps. Dual radios and WDS capability
allows wireless backhaul to the VP2200
Base Station.
Security
Vivato products offer industry standard security on all its products. To protect the wireless
network, the device offers multiple SSID/VLAN support to segregate client traffic and each
SSID/VLAN supports different authentication/security models. Standard security: WEP (40and 104-bit (RC4)) encryption, 802.1x (EAP-TLS, EAP-TTLS, PEAP), and WPA (TKIP/MIC,
802.1x) are supported. Other enhanced features include ICCF (inter-client communication
filtering), which prevents client-to-client traffic, and MAC address filtering, which allows
administrators to deny or permit client association.
Manageability
The device can be easily managed remotely via VivatoVision™ WebUI or CLI through secure
HTTPs or SSH connections and supports SNMP and remote and local logging. The VA2200
may also be managed locally through a DB-9 serial port. Vivato helps protect investments by
offering software upgrades that keep the device up-to-date with the latest features.
Powered Ethernet
No additional power drops are required at each installation point; an advantage in areas with
no power outlets. Reduce cost and labor by running power through the Ethernet cable to
each VA2200.
WIRED SPECIFICATIONS
Network Interfaces
IEEE 802.3 auto-sensing 10/100BaseT port
MANAGEMENT & MIB SUPPORT
Local Management
RS-232 Serial Console Port
Remote Management
HTTPs, SSH, SNMP (v1, v2c)
MIBs
RFC 1213, RFC 1493 Bridge
Generic and Enterprise Specific Traps: IEEE 802.11, IEEE 802.1x
Logging
SNMP trap support
Local and Remote Syslog
File Management
TFTP, SCP
SECURITY
Static and Dynamic WEP Encryption
40- and 104-bit (RC4) Encryption
WPA
802.1x – EAP-TLS, EAP-TTLS, PEAP, TKIP/MIC
802.11i / WPA2
AES supported
802.1x – EAP-TLS, EAP-TTLS, PEAP, TKIP/MIC
ICCF
Inter-client communication filtering
Multiple SSID/VLAN
Support for up to 16 MSSID/VLANs each capable of supporting a
different security model
ENVIRONMENTAL
Dimension
5.7 (L)" x 8.3 (W)" x 1.6 (H)" (145 mm x 210 mm x 40 mm)
AC Power Supply
Input power adapter: AC 120v, 50-60Hz
Input AP/Bridge: DC 12V, .8A
Powered Ethernet
Total Ethernet cable power solution with
available power extractors and injectors
Weight
2.1 lb. (950g)
Adaptability
In the dual-radio architecture, each radio provides single- or dual-mode operation. Singlemode allows one radio to operate as a dedicated wireless-to-wireless bridge via WDS
(Wireless Distribution System), while the other radio operates as a dedicated access point
(AP) to standard 802.11b clients. Dual-mode allows each individual radio to operate both
WDS and AP mode simultaneously. WDS functionality enables a low-cost backhaul solution
extending networks in locations that are difficult or costly to wire. Additionally, Vivato has
certified several third party high-gain and directional antennas to adapt to any deployment
environment.
WIRELESS SPECIFICATIONS
Network Standard
802.11b – DSSS (Direct Sequence Spread Spectrum)
Frequency band/Operating Channels
2.4 – 2.483 GHz, IEEE North America Channel Set (1-11)
WLAN Architecture
802.11 infrastructure – ESS, Wireless Distribution System (WDS)
Supported Data Rates
802.11b: 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps, rate auto-fallback
Media Access Control
Collision Sensing Multiple Access/Collision Avoidance
(CSMA/CA)
Receive Sensitivity
Receive Sensitivity @ FER=.08
11 Mbps (CCK): -85 dBm
5.5 Mbps (CCK): -88 dBm
2 Mbps (DQPSK): -89 dBm
1 Mbps (DBPSK): -90 dBm
Operating Range – Open Environment
(~22.5dBm output power)
11 Mbps: 890-1,470ft (300-450m) 2 Mbps: 1,640-2,460ft (500-750m)
5.5 Mbps: 1,310-1910ft (400-600m) 1Mbps: 2,625-3930ft (800-1200m)
Operating Range – Office Environment
(~22.5dBm output power)
11 Mbps: 150-190ft (45-60m) 2 Mbps: 200-255ft (60-75m)
5.5 Mbps: 185-235ft (55-70m) 1 Mbps: 230-295ft (70-90m)
Users per device
Up to 100 simultaneous users
Transmit Power
~22.5dBm
Antennas
Two 2.2dBi omni-directional antennas
VP2200 Base Station
Warehouse
In a hybrid deployment with the VP2200
Base Station, VA2200 Pico-Cells increase
bandwidth in high demand areas.
Use VA2200 Pico-Cells to fill coverage
gaps. Dual radios and WDS capability
allows wireless backhaul to the VP2200
Base Station.
Security
Vivato products offer industry standard security on all its products. To protect the wireless
network, the device offers multiple SSID/VLAN support to segregate client traffic and each
SSID/VLAN supports different authentication/security models. Standard security: WEP (40and 104-bit (RC4)) encryption, 802.1x (EAP-TLS, EAP-TTLS, PEAP), and WPA (TKIP/MIC,
802.1x) are supported. Other enhanced features include ICCF (inter-client communication
filtering), which prevents client-to-client traffic, and MAC address filtering, which allows
admin-istrators to deny or permit client association.
Manageability
The device can be easily managed remotely via VivatoVision™ WebUI or CLI through secure
HTTPs or SSH connections and supports SNMP and remote and local logging. The VA2200
may also be managed locally through a DB-9 serial port. Vivato helps protect investments by
offering software upgrades that keep the device up-to-date with the latest features.
Powered Ethernet
No additional power drops are required at each installation point; an advantage in areas with
no power outlets. Reduce cost and labor by running power through the Ethernet cable to
each VA2200.
WIRED SPECIFICATIONS
Network Interfaces
IEEE 802.3 auto-sensing 10/100BaseT port
MANAGEMENT & MIB SUPPORT
Local Management
RS-232 Serial Console Port
Remote Management
HTTPs, SSH, SNMP (v1, v2c)
MIBs
RFC 1213, RFC 1493 Bridge
Generic and Enterprise Specific Traps: IEEE 802.11, IEEE 802.1x
Logging
SNMP trap support
Local and Remote Syslog
File Management
TFTP, SCP
SECURITY
Static and Dynamic WEP Encryption
40- and 104-bit (RC4) Encryption
WPA
802.1x – EAP-TLS, EAP-TTLS, PEAP, TKIP/MIC
802.11i / WPA2
AES supported
802.1x – EAP-TLS, EAP-TTLS, PEAP, TKIP/MIC
ICCF
Inter-client communication filtering
Multiple SSID/VLAN
Support for up to 16 MSSID/VLANs each capable of supporting a
different security model
ENVIRONMENTAL
Dimension
5.7 (L)" x 8.3 (W)" x 1.6 (H)" (145 mm x 210 mm x 40 mm)
AC Power Supply
Input power adapter: AC 120v, 50-60Hz
Input AP/Bridge: DC 12V, .8A
Powered Ethernet
Total Ethernet cable power solution with
available power extractors and injectors
Weight
2.1 lb. (950g)
ENVIRONMENTAL
Temperature
0° C to 55° C (32° F to 131° F) - Operating
-40° C to 70° C (-40° F to 158° F) - Storage
Humidity
95% non-condensing typical
CERTIFICATIONS
Radio – FCC Part 15.247
Industry Canada RSS210
PRODUCT WARRANTY
One year limited warranty
PRODUCT ACCESSORIES
POWER SUPPLIES
Part Number
Single port PoE injector
VA2200-SPEI
Vivato single port PoE injector
EU Power Supply
VA2200-EUPS
Two prong power supply
UK Power Supply
VA2200-UKPS
Three prong power supply
CERTIFIED THIRD-PARTY HIGH-GAIN AND DIRECTIONAL ANTENNAS
* Note: Vivato does not sell the following antennas, but has certified them for use with the VA2200
Product Name
Horizontal Omni Antennas (Indoor/Outdoor)
Superpass
Superpass
Superpass
Vertical Omni Antennas (Indoor/Outdoor)
Superpass
Superpass
MaxRad
Vertical Omni Antennas (Indoor)
Maxrad
Vertical Omni Antennas (Outdoor)
Maxrad
Maxrad
Product Description
2.4 GHz, 8.5dBi Horizontally polarized Omni
2.4GHz, 5.5dBi, Horizontally polarized Omni
2.4GHz, 3.2dBi, Horizontally polarized Omni
Benefits
• Dual radio architecture enables wireless backhaul from locations that are difficult or
costly to wire.
• RP-TNC connectors allow the use of different antenna options for optimal deployment
coverage adaptability and flexibility
• High performance processing for dual radio operation supporting up to 100
simultaneous users
• Vivato devices interoperate with any Wi-Fi approved vendors’ wireless PC cards, PCI
adapters, and USB adapters to provide wireless access to the Internet, to email, and to
corporate networks offering seamless integration with any existing wired network
• Offering superior performance and price, the Vivato solution is VPN compatible, allowing
mobile travelers to access their corporate Intranets through the use of Virtual Private
Networks (VPNs)
2.4 GHz ISM 5.2 dBi Ceiling Mount Omni, 36" pigtail with
RPTNC connector
Maxrad
Maxrad
Maxrad
Directional Yagi Antenna (Indoor/Outdoor)
MaxRad
2.4 GHz 10 dBi, Enclosed YAGI 18" pigtail RPTNC connector
headquarters
1820 gateway drive
suite 300
san mateo, ca 94404
phone 1-866-802-1600
intl. phone +1 650-227-0490
www.vivato.com
The Vivato 802.11b Indoor Wi-Fi AP/Bridge is a powerful and flexible multi-functional device.
The dual 200mW radio architecture combined with advanced software features creates a
robust platform at an economical price.
2.4 GHz 6.5 dBi Omni, N-connector
2.4 GHz 4.5 dBi Omni, N-connector
2.4 GHz ISM 11 dBi Mast Mount Omni, 18" pigtail, RPTNC connector
2.4 - 2.5GHz 4dBi Omni directional antenna, N connector
2.4 GHz ISM 5.2 dBi Mast Mount Omni, 36" pigtail with
RPTNC connector
2.4-2.5GHz 10dBi Omni directional antenna, RPTNC connector
2.4-2.5GHz 8dBi Omni directional antenna, N connector
2.4-2.5GHz 6dBi Omni directional antenna, N connector
Panel Antenna (Indoor/Outdoor)
MaxRad
VA2200 – Vivato 802.11b Indoor Wi-Fi AP/Bridge
Functionality
The AP/Bridge can function as either an independent access device or as a part of the Vivato
Wi-Fi System. When used in conjunction with the Vivato Base Station, the AP/Bridge can fill
RF holes, increase capacity or extend range, creating a comprehensive system for large area
WiFi coverage.
2.4 GHz ISM, 8 dBi, XF panel antenna RG58/U Type pigtail
(12 inch), RPTNC connector
research and development
12610 e. mirabeau parkway
suite 900
spokane, wa 99216
phone 509-343-6001
© 2004 vivato, inc. all rights reserved. all specifications are subject to change without notice.
gfd / 11 / 2004
VA2200 – Vivato 802.11b
Indoor Wi-Fi AP/Bridge