Harig Mfg Catalog

Transcription

Harig Mfg Catalog

Sl001
S S \f 1 )
al~OM
PRODUCT INDEX
•~
V-Block Fixtures
'f'
Grind-All No.1
p.4-5
Grind-All No.2
p.6-7
5C-Collet Fixtures
Duo·Form
p.8·9
Ultro-Grind No. 5C-V p.l0-11
(j"
"
Uni-Dex
Wheel Dressers
Duo-Form
p. 8·9
---Tru-Dex
-f
~
p.12-13
Spin-Indexer
p. 14-15
Mogna·Dress
p.p. 22
Adjusto-Dress
Ultra-Grind No.
5C-V
22 p.l0-11
-
•
~
p.16
Grinding Between Centers
~~
lectric -Centers
EDM Tooling
•
Rota-Spindle
p. 18
Flush-Chuck
p. 19
p.ll
Base Plote & Tail Stock p. 5, 9, 11, 13
Twin·Angle
p. 19
••
Adjusta-V
20mm Indexer
Chiller
p. 21
Multi-Use
Accessories
~
to'.
phone 847.647.9500
p. 19
Edge·Master
p. 20
MC Indexer
Ii) "~
Ho-Vee System
p.15
•• 11 @!J; ~
System 3R EDM Indexers
Kool-Grind System
Adapter Plate
p. 22
c
Chuck No. 612
~;
p. 19
Mag. Ref.Chuck
p. 20
p. 20
C)..
p. 21
Plate No. 44
p. 21
~
11111
~
~
~
Planner-Gage
p. 22
Compac-Vise
p. 22
fax 847.647.8351
Super Wee-Blocks
p. 22
GRIND-ALL
NO.
I ACCESSORIES
~
11111
SUPER WEE·BLOCKS
065-100
PIN
• Accurately holds small ports from 0.030" to '/]'1"
BASE·PLArE & rAIL·srocK
• Set consists of 2 wee· blocks and 2 bridges
PIN 015-100
Permanent
6" capacity between centers
• Hardened and ground to "tenths" accuracy
PIN 10-55
• Accurately locates and damps ball-seat punch
• Nibs available in 1/4,
IN, and
1/16", 3/a"'
magnet
1 single strap
Hardened and ground tool steel
BALL-SEAr PUNCH ADAPrER
105-100
Single angle (5" sine)
18" base-plate also available
• Indudes case
PIN
6" x 6" with 2 rails
4" x 11" with rail
• Retaining bars: (2) 1/31", (2) l/a", (1) 1/16"
SINE· CHUCK
,
3/4
diameters
SINE·PLArE
PIN
055-100
MorO·GRIND
PIN
10-70
For light duty work
Indudes motor, base plate, drive belt, & case
Variable speed from 50-550 rpm
• 4" x 6" with 2 rails
1/15 horsepower
11 Ov AC motor
0.200 minute angle step
~
LENGrH srop
10-95
PIN
• For multiple piece parts
0\
RECrANGLE·JAWS
• For holding rectangular
PIN
SrEADY·RESr
PIN
135-100
Assists in grinding very small diameters
Magnetic base
075-100
parts from 0.070 to capacity
of v-block
Spring loaded plunger
FACE PLArE
PIN
10-90
6" diameter
• Indudes case
HlrE·ANGLE
RADIUS DRESSER AIlItt
PIN
10-52
• For dressing wheels up to 10" diameter
• OD diamond nib (P/N 91002)
.ID
diamond nib (P/N 91003)
phone 847.647.9500
MAGNETIC
CHUCK
• 4" diameter
• Fine pole permanent
PIN
10-40
M
PLATE
PIN
085-100
9 1/2" X 5" x 4" wide
Allows for horizontal use of Harig fixtures
magnet
Indudes side rail and mounting holes
fax 847.647.8351
GRIND-ALL NO.2 ACCESSORIES
~11111
SUPER WEE·BLOCKS
PIN 065-100
• Accurately holds small parts from 0.030" to
9N'
W',
PIN 075-100
paris from 0.070 to capacity
of v-black
• Set consists of 2 wee-blacks and 2 bridges
• Retaining bars: (2) 1/31", (2)
RECTANGLE·JAWS
SINE·CHUCK
• Hardened and graund to "tenths" accuracy
(1) 1/16"
• Includes case
Permanent
• Includes case
PIN 105-100
magnet
1 single strap
STEADY·REST
PIN 135-100
• Assists in grinding very small diameters
• Magnetic base
BALL·SEAT PUNCH ADAPTER
PIN 20-60
• Spring loaded plunger
ROTARY TABLE MECHANISM
• Accurately locates and clamps ball-seat punch
• Nibs available in 1ft,
5/11", 3/8", 1/7", and
KIT
PIN 20-50
3/t
diameters
For rotating face plate in horizontal position
Ideal for light milling and index table work
Factory installation available
RADIUS DRESSER ARM
PIN 10-52
• For dressing wheels up to 10" diameter
No.2
• OD diamond nib (P/N 91002)
PIN 20-70
MOTOR ATTACHMENT
.ID diamond nib (P/N 91003)
• For light duty work
• Includes matar, bracket & drive belt
• Variable speed from 50-450 rpm
• 1/10
horsepower
11 OVAC motor
CARRYING CASE
PIN 20-65
Fits Grind-All No.2 with or without rotary table
mechanism
Provides pratective, dust-free storage
phone 847.647.9500
fax 847.647.8351
DUO-FORM
ACCESSORIES
~"
"
11 ••
1~
SUPER WEE·BLOCKS
RADIUS DRESSER ARM
PIN 10-52
·ID
to
9
N'
IN'
• Retaining bars: (2) 5/32", (2) ifs", (1)
91002)
diamond nib (PIN
• Accurately holds small parts from 0.030"
Set consists of 2 wee·blocks and 2 bridges
• For dressing wheels up to 10" diometer
• OD diamond nib (PIN
PIN 065-100
91003)
STEADY·REST
Magnetic base
Includes case
0\
•
PIN 075-100
RECTANGLE·JAWS
PIN 135-100
parts from 0.070 to capacity
.,
of v·block
• Hardened and ground to "tenths" accurocy
SINE· CHUCK
• Includes case
PIN 105-100
• 6" x 6" with 2 roils
• Permanent
magnet
• Single angle (5" sine)
• I single strap
HITE·ANGLE PLATE
91/7"
PIN 085-100
x 5" x 4" wide
Includes side roil and mounting holes
..
~.'II
~~
SINE·PLATE
·4" x 6" with
•..-
,
,,,,
PIN 055-100
BASE·PLATE & TAIL·STOCK
2 roils
PIN 015-100
• 4" x II" with rail
• Single angle (5" sine)
• 0.200 minute angle step
• Hardened and ground tool steel
• 5" capacity between centers
• 18" base-plate also available
phone 847.647.9500
fax 847.647.8351
ULTRA-GRIND NO. 5C-Y ACCESSORIES
~~
11111
PIN 065-100
SUPER WEE·BLOCKS
Accurately holds small paris from 0.030" to 'f,,"
PIN 105-100
SINE·CHUCK
ULTRA·GRIND MOTOR ATTACHMENT
PIN 210-70
• Mounts to side of unit
Retaining bars: (2) 5/31", (2) 1/.", (1)
Permanent
Indudes motor, brocket and drive belt
Set consists of 2 wee-blocks and 2 bridges
IN'
Hardened and ground to "tenths" accuracy
magnet
Indudes case
1 single strap
• 1/15 horsepower
11 Ov A( motor
PIN 10-52
RADIUS DRESSER ARM
STEADY·REST
PIN 135-100
For dressing wheels up to 10" diameter
OD diamond nib (P/N 91002)
Magnetic base
ID diamond nib (P/N 91003)
PIN 120-50
FACE PLATE
• 5" diameter
1\
• Soh face
• With adapter shank
PIN 075-100
RECTANGLE·JAWS
For holding rectangular
paris from 0.070 to capacity
of v-black
BASE·PLATE & TAIL·STOCK
PIN 015-100
Indudes cose
4" x 11" with rail
PIN 120-60
3·JAW CHUCK
• 1 3j." maximum opening with straight jaws
• 18" base-plate
also available
• 3 3/." maximum opening with step jaws
• 3/t
thru hale
•I
-
J_
J
.~,.~
~
PIN 120-70
MAGNETIC CHUCK
• 4
3/t diameter,
2
l/t
SINE·PLATE
PIN 055-100
4" x 6" with rail
thick
• Standard pale permanent
magnet
~
HITE·ANGLE PLATE
9
I/t
Indudes side rail and mounting holes
phone 847.647.9500
PIN 085-100
x 5" x 4" wide
fax 847.647.8351
UNI-DEI ACCESSORIES
"'"'
.-
•.
".
1STEADY-REST
~..!...~~'~
FACE PLATE
PIN 120-50
PIN 135-100
.•.•.
Assists in grinding very small diamelers
PIN 055-100
Magnetic base
• 5" diameter
SINE-PLATE
• Soft face
• With 5C adopter shonk
3-JAW CHUCK
PIN 120-60
SINE-CHUCK
1 J/s" maximum opening with straight jaws
• 3 J/s" maximum opening with step jaws
• IN thru
PIN 105-100
6" x 6" with 2 roils
PIN 70-70
MOTO-GRIND
hole
• With 5C adopter shonk
Permanent
magnet
For light duty work
Includes motor, base plate, drive belt, & case
1 single slrap
• 1/15
horsepower
11 Ov AC molar
BASE-PLATE & TAIL-STOCK
PIN 015-100
PIN 120-70
MAGNETIC CHUCK
- 4 Jj4" diameter, 2
W
4" x 11" with rail
thick
Standard pole permanent
~
magnet
With adopter shonk
HITE-ANGLE PLATE
18" bose-plate also available
PIN 085-100
Hardened and graund 1001 steel
9 1/2" x 5" x 4" wide
Includes side roil and mounting holes
9
phone 847.647.9500
fax 847.647.8351
SPIN-INDEXER
I
ACCESSORIES
DIAMOND
PIN 91005
NIB
Inserts into top of fixture
PIN 135-100
STEADY·REST
Easily dresses wheels
Magnetic base
PIN 120-50
FACE PLATE
5" diameter
• Soft face
• With 5( adapter shank
COLLET STOP
PIN 150-100
Adjustable and threaded
Assists in production work
SINE·PLATE
4
PIN 120-60
3·JAW CHUCK
1 3js" maximum opening with straight jaws
MANUAL
Soft top plate
- 3 3js" maximum opening with step jaws
• 3/4"
PIN 125-100
IN x 6" with rail
COLLET CLOSER
PIN 140-100
lever action
thru hole
With 5( adapter shank
For quick set ups of collets and accessories
• Hardened and graund tool steel
SINE· CHUCK
PIN 120-70
MAGNETIC CHUCK
4
3ft
diameter, 2
1//
Permanent
thick
Standard pole permanent
PIN 105-100
COLLET STOP SET
magnet
PIN 145-100
Adjustable and threaded
magnet
4 piece set
1 single strap
Assists in production work
"
ADAPTER PLATE
MOTOR ATTACHMENT
PIN 120-80
3/{
x
PIN 130-100
AIR COLLET CLOSER
4 1/7" x 12"
PIN 165-100
• Motorizes manual Spin-Indexer (P/N 122-100)
2" minimum between centers
Only for use with motorized Spin-Indexer PIN 120-100
• Includes motor, bracket, & drive belt
7 1/7" maximum between centers
Mounts directly to bock of spindle pulley
Mounts in forward or rearward
position
• 1/15 horsepower
IN x 2" tail center
is adjustable
Includes 5( solid center with drive plate
Spring set and air released by push button air valve
Minimum air pressure of 50 psi required
11 OVA( motor
phone 847.647.9500
fax 84'7_647-.~1:1
-
LECTRIC-CENTERS
Harig's
original
cylindrical
grinding between
accuracies
grinder
to be easily
to
punches,
the
cylindrical
grooves,
part
fixture
grinding
applications
races, and slots accurately
external
grinder
pulley
for fast
grinding between
is a must,
stock
ta grind
Hold
angles,
and efficiently.
Motorized
removal.
Also
head and
When
centers on a sUITace
trust
the
lectric{enters
fixture to get the job done accurately.
by Harig's trademark
"tenths"
a sUITace
for grinding
and shafts.
lectric{enters
can be used for critical inspection.
two-speed
for precisian
Quickly converts
cutters, shanks,
in the
used
Dead center design permits
obtained.
pins, reamers,
piece
grinding
centers.
Backed
service.
FEATURES
Hardened and ground tool steel base allows grinding
between
centers up to
r
Grind and check parts within 0.00005
PIN 025-100
TlR
Fan cooled motor and 2 speed pulley for efficient aperatian
• Interchangeable
hardened
tool steel centers are male on one end,
female on the other
Tail-stock taper adjustment
allows extremely
accurate settings to be
obtained
• Head-stock center is on lever controlled sliding ram and has adjusting
~
screw for spring tension
Head stock and tail stock are both adjustable
• Base-Plate
for greater flexibility
8. Tai~Stack with addition of rail can be used with other
111
Harig fixtures
Built in diamond holder for quick dressing of grinding wheels
SPECS
Obtainable
runout
Grinding between
0.00005
centers
up ta
TIR
r
Center height
3.000"
Swing
6"
Motor
115V, 60C
Speeds
1808.
Weight
20lbs
360 rpm
- - - "' -..."
/'-:"-.",
"''"'
ACCESSORIES
18" BASE PLATE
PIN 15-30
DIAMOND NIB
PIN 91005
CARBIDEHEAD STOCK
PIN 25-40
CARBIDETAil STOCK
PIN 25-41
SINE·PLATE
.."
J
~
PIN 055·100
4" x 6" wilh 2 rails
phone 847.647.9500
SINE· CHUCK
PIN 105-100
6" x 6" wilh 2 roils
Permanenl
0.200 minule angle step
1 single slrap
--.
magnet
-
EDM TOOLING
TWIN-ANGLE
FLUSH-CHUCK
Harig's precision holding fixture mounts
Harig's Flush{hucks
Harig
allow the use of small electrodes in the
Rota-Spindle
and
other
EOM
rotating
mochine,
spindles.
Unique sealing system permits use of longer electrodes
by
putting seal close to nose of spindle and cuts downtime
for
surfoce
has W'
Model E-20 Flush{huck
shonk
hos 20mm
grinding
workpieces
electrode replacement.
Model E-5 Flush{huck
ond serves as 0 workholder
Twin Angle No.1:
2 II
Twin Angle No.2:
3
shonk
ond
Two sizes available
with 2-v's
EOM
Also con be used far
each, to accurately
hold
within "tenths".
Optional 31
3ht,
in verticol ram of conventional
s"
lit
x 2 lis" ond 1 31s" x 11 IB"
x 2
lit
ond 2
lit
x 2"
~
Includes 2 clamps
• Uses precision keyless chuck with up to
• Includes three seols: 1/16",
applications.
electrodes
for wire EOM opplicotions.
II s"
capacity
20mm
II s"
t
shonk (PIN 40-02)
ar
shonk (PIN 40-04)
is available
Quick set-up, eosy to use
Hardened
ond ground
to "tenths"
PIN 155-100 Model E-5
PIN 160-100 Model E-20
accuracy
PIN 040-100
No.1 Twin Angle
PIN 185-100 No.2 Twin Angle
EDGE-MASTER
ADJUSTA-V
Harig's
v-block electrode
electrodes accurately.
holder
ond easy.
II/'
to conventional
Con be used os 0 v-block attachment
unit mokes centering workpiece
• 1
mounts
with odd or dimensionally
EOM
machines
and
with ony collet fixture.
centers
Versatile
varied shonk diometers
Holder is more rigid than callets ond allows operator to work with "tenths".
v-block copocity
to either
light drilling, milling, boring, jig-grinding, ond EOM warkholding.
a flush·{Up to be mounted
beneath
with workpiece overhang
blocks provide constant
xly
coordinates
A support block may be used for precise flatness and quick set ups
accuracy
Ideal for multiple ports
• Shonk has center hole for
Mounting holes provide flexibility
holding longer electrodes
3 Flush Cup sizes available:
• Single screw for fost
3" (PIN 50-06)
locking of v-block
Hardened ond ground too/ steel
I" diameter shank
20mm diameter shank
30mm taper shank
40mm taper shank
-------------------phone 847.647.9500
1" (PIN 50-08),
Ideal for
The EdgErMaster allows
the workpiece for EOM reverse flush set-ups.
6" x 12" copocity can be expanded
Hardened and ground to "tenths"
side of center
PIN 190-100 with
PIN 191-100 with
PIN 192-100 with
PIN 193-100 with
toble permits a variety of machining opplications.
2 rails on vertical mounting
.• Positioning occuracy to 0.0001"
3/ /' odjustment
quick
Harig's precision mounting
2" (PIN 50-07),
-
KOOL-GRIND SYSTEM
Harig's potented
you grind.
System
Kool-Grind System
revolutionizes
dry grinding by mointoining
-
cool warkpiece
temperotures
~
os
An internolly cooled Plote ond/ or Chuck poired with the self-<:ontoined Chiller enobles the Kool-Grind
to keep your workpieces
cool.
Heot generoted
in the workpiece
during the mochining
obsorbed by the Plote or Chuck instontly, without messy externol coolont or mist systems.
System
-
prevents
ports from warping
due to temperoture
ftuctuotions,
ond eliminotes
process
is
The Kool-Grind
down time
coused by woiting for pieces to cool. Without the fear of warping, you con leove less grinding
stock on your workpiece,
ochieve closer toleronces,
ond reduce grinding wheel breokdown.
When dry-grinding, Harig's Kool-Grind System improves your occurocy, increoses production
rotes, ond odds repeotobility
service ond replocement
by cooling workpieces
ports ovoiloble.
without
externol coolonts.
Full repoir
Reliobility bocked by Harig's trodemark
service.
l .
U.S. Patent
~PIN 240-40
~.
#6,039,517
~,.
•..
KOOL-GRIND
CHUCK
No. 612
KOOL-GRIND
No. 44
PLATE
KOOL-GRIND
CHILLER
4" x 4" Plate with back rail, side rail, and two attached
Includes four quick disconnect fittings for use with Kool-
and side rail
quick disconnect fittings
Grind Plate No.44 and/or
Patented internally cooled design draws heat out Irom
Patented internally cooled design instantly draws heat out
User sets front pone I temperature
workpiece when Chuck is connected to Kool-Grind Chiller
from workpiece when Plate is connected to Kool-Grind
internal coolant temperature
Universal size handles larger parts and is easily
Chiller
mounted to any 612 surlace grinder
Plate fits on top of existing permanent
6" x 12" line· pole electromagnetic
Chuck with back rail
Precision ground watertight design leaturing
a solid one-
Convenient Iront panel
electromagnetic
to Plate and/or
magnet or
diol to mointain occurate
Irom 50-70°F
ani off
switch re-circulates coolant
Chuck quickly and quietly
Highly efficient magnetic drive pump and durable
chuck
Plate transfers strong magnetic pull to workpiece from
piece laminated top-plate
Kool-Grind Chuck No.612
compressor for care-Iree operation
Easy top fill with screw cop and large capacity reservoir
Strong magnetic holding power - even on top edges 01
longitudinal or transverse
working surface
Super fine·pole Plate is ideal lor grinding small and thin
Valved quick disconnect fittings prevent accidental spraying
longitudinal
workpieces
of coolant
Sleek design allows use on top of sine-chucks
Top mounted carrying handle for easy portability
Includes 6' Plate Tubing with four quick disconnect fittings
Includes detachable
grinding taller pieces
lor easy portability
gallon of Kool·Grind Koolant
Includes 6' Chuck Tubing with quick disconnect finings
Pressure tested for leaks prior to shipment
Operation monual included
line-pole magnets lor stronger and more
unilorm holding 01 small parts
• low height for greater wheel head clearance when
Pressure tested for leaks prior to shipment
chucks
Specs
Specs
6 It. flexible power cord and one
Specs
Size
4" x 4" x I"
Size
Temperature
12" x 18" x 11"
Size
6" x 12" x 3"
Square & parallel to
0.0002
Spacing
Power Required
~' poles & }{," separators
115V DC 60 watts
Spacing
Poles
longitudinal on one side
Reservoir copocity
1.5 quarts
Weight
451bs.
Power Required
11 OV AC
Weight
transverse
7lbs.
Amps
7.0 @ startup, 3.6 running
471bs.
M'-poles &
X7"
separators
senings
Cooling capacity
on flip side
Weight
AUTOMATIC RELEASE CONTROL (PIN 240-62)
Far use with the Kool-Grind
D-I DD% voriable
Full, variable
holding
automatic
Chuck No.612
power adjustment
release
and residual
MANUAL
with automatic
modes
phone 847.647.9500
releose
cycle
RELEASE CONTROL (PIN 240-61)
For use with the Kool-Grind
D-I DD% variable
holding
Chuck No.612
power
adjustment
50-WF
390 watts @ 68°F
ADDI"ONAI. INFORMArloN
WEBSITE
Visit our website
constanriy
www.harigmfg.com
at
updating our website
to bring you the latest Harig innovations.
of our "world class tools," download
email, take advantage
internet
\.
I ,.
'
rrr \ ~.J
..,
•
r ..
,,, '.1
I, .j' I. .
;-~-
I
ff~/
'\
.-.J
'r
I.
I
far the latest Harig product information.
We are
View digital color pictures
technicol data, print current price lists, send us 0 question via
of special internet offers, ond ploce on order direcriy with a credit card.
storefront answers
011your questions
Our
instanriy .
l ,...
·,f'~lf(
REPLACEMENT PARTS
Harig stocks a complete
>oJ
inventory of replacement
Extend the life of your "warld dass"
components.
parts for every one of our fixtures and accessories .
Harig tool and maintoin occuracies by replocing bra ken or worn
www.harigmfg.com
Our website
parts for every Harig praduct offering.
contains a complete price list of replacement
Please coli with any questions.
REPAIRS
Unlike many of our competitars,
Harig offers a complete
in-house repair service at our factory in
Niles, IL. Harig's "world dass tools" are designed
to be easily repaired, extending
of your fixture considerably.
rely on years of experience
to ariginal tolerances
Our skilled craftsmen
at a reasonable
price.
While we recommend
utmost care, it is comfarting
to know that Harig's "trademark
arise.
individually.
Each unit is inspected
paperwork
the value and life
to get your unit back
handling our fixtures with the
service"
is available should a problem
Please send your unit to our plant with the proper
to receive a repair evaluation.
TRADE SHOWS
Visit Harig's booth at various manufacturing
www.harigmfg.com.
trade shows during the year.
Search our website
ar call to see when we will be displaying our products in your area.
SHOWROOM
Harig has a complete
experience
showraom
at our Niles, IL location.
We encourage
our "world dass tools" when you are in Chicago.
and O'Hare Airport, our showraom
is warth the trip.
you and your associotes to
Convenienriy located near downtown,
Far specific demonstrations
of any of our
fixtures, phone ahead far an appointment.
WARRANTY
Harig offers a l-year warranty
on new items and a 6-month warranty
"upon inspection."
This assumes
otherwise
All prices, conditions,
abused.
on repairs.
that the tool has not been mistreated,
praduct design, and materials
dropped, submerged,
are subject to change
without notice.
phone 847.647.9500
All warranties
fax 847.647.8351
are
or
MULTI-USE
Harig's precise adjustable
riser v-black system plus traveling height gage affers numerous
with the Basic V-Black to hald workpiece
punches,
securely and accurately.
core pins, plugs, and EDM electrodes.
height gage.
Standard
applicatians.
Use
Use with the Multi-6 V-Black far end finishing af
Mount a dial indicator to the riser block for use as an accurate travelling
8" pasts with 5" width included.
versatility makes every toalraam
warkhalding
ACCESSORIES
When productivity is a must, the Ho-Vee System's
more efficient. Reliability backed by Harig's trademark
MULTI-6
unmatched
service.
V-BLOCK
6" x 2" x 1 ]/4' height
Has 6 V's with '12" diameter capacity
Centers of V's are 0.875" apart
For end finishing of multiple parts
Can be used vertically or horizontally as a "stand alone"
PIN 235-20
BASIC V-BLOCK
V-block capacity holds parts up
to 1" in diameter
Quick set-ups
, 0" POSTS
Indudes strap clamp
Hardened and ground to
Indudes 2 posts
"tenths" accuracy
Extends Ho-Vee riser system
PIN 235-10
PIN 235-40
COMPAC-VISE
HO-VEE RISER
PIN 235-100
A DJUS TO-DRESS
4 'I." x 2" with 2 'I." maximum openings
• Handy wheel dresser is fast and accurate
Ideal for holding smaller parts
• Adjust height up to 10" on dressing unit instead af
Sleek design allows unit to go where larger vices cannot
slow surface grinder vertical feed
Movable jaw has both vertical and horizontal "V" to
• Angled to fit easily under wheel
securely hold workpiece
• For both boNom and side wheel dressing
PIN 110-100
PIN 045-100
::.4,.
I~II
PLANNER-GAGE
• I" width and beveled ways for minimum deflection
• Range
IN to 10"
~
MAGNA-DRESS
SUPER WEE-BLOCKS
Accurately holds small parts fram 0.030"ta
Set consists of 2 wee-blocks and 2 bridges
'N,
• Magnetically damps onto fixture far quick wheel dressing
• Permits boNom and side wheel dressing on chuck in one set up
• Avoids time consuming cranking of surface grinder's vertical feed
• Fastest way ta set radii
• Retaining bars: (2) 1/32", (2)
·Indudes
• Hardened and graund ta "tenths" accuracy
• Clamps an any surface that takes magnetic hold
.Indudes
• Built in release screw breaks magnetic hold
PIN 035-100
PIN 065-100
22
case
phone 847.647.9500
case
(l) '/16"
9/32"
PIN 095-100
fax 847.647.8351
·SYSTEM
3R EDMINDEXERS
o,,,er
tOtA
wn'9 wnoc1e\s
avaUab\e
The precision indexing technology
in Harig's
Grind-All No.1 head is paired with System 3R's
most popular chucks to create two dedicated
electrode makers.
The marriage of a System
3R chuck with a Harig grinding fixture allows
the operator to accurately
praduce electrodes
and easily transfer them between
machines.
Harig EDM indexers enhance your company's
existing System 3R reference
unmatched
repeatability,
system, providing
improved precision,
and shorter set-up times.
Specs
\,
PIN 245-100
PIN 250-100
20mm EDM INDEXER
MC EDM INDEXER
Accepts 20mm tooling ond uses System 3R's #3R-321.2
mini
Uses System 3R's #3R-460.34
monuol chuck
Center height
Graduotion
3.000"
24 division indexing
+/1
Angles between indexes
via odjustable stops
0.0001"
360 degree
Square and parallel to
Extended base
manual combi chuck
better bolonce 8. minimal
System 3R's MacroCombi reference system provides
Incorporates Harig's gear rack to ollow for precise offset movements
simultaneous
System 3R's mini reference system offers unparolleled repeotobility
the economical MacroJuniar system without adopters
and accuracy and is the most widely used electrode holder system
111bs.
0 seconds
deflection
access to the highly accurate Macro System ar
131bs.
EDM MAGNETIC
Harig's low profile EDM Magnetic
including:
REFERENCE CHUCK
Reference Chuck System is compatible
System 3R, Erowa, Hirschmann,
Mecatool,
This 6" x 6" magnetic chuck expands the copabilities of your company's
This is accomplished
chuck.
chuck also provides for oil and watertight
of piece ports submerged
and automated
system.
utilizing the rails on the
direcNy to the ram of your conventional
positioning accuracy.
This reference
existing EDM reference
by precisely locating and securing electrodes for machining,
The electrode can then be transferred
maintaining
with all EDM tooling systems
ete.
EDM machine
while
•
holding
in the tonk, manual work holding,
referencing.
Neodymium
magnets
provide
ultimate holding power.
Specs
Size
6" x 6" x 1.6" with 4 rails
Magnetism
Spacing
Rare earth permanent magnets
Fine-Pole
Watertight
Hermetic to fluids
Flot, parallel, 8. square
within 0.0001"
Weight
16 Ibs.
{Other sizes available}
20
phone 847.647.9500
PIN 255-100
'ax 847.647.8351
ROTO-SPINDLE
Harig's
economical
machines
EDM spindle
to increase
mounts
productivity.
electrode to improve accuracy, decrease
hale-making
Spindle
speed up to 50%.
(PIN
to conventional
The Rota-Spindle
electrode wear, and increase
Available in 2 madels, the E-5 Rata-
uses ER-20 or RD-20 collets up to 1/
170-100)
while the E-20 Rota-Spindle
(PIN
175-100)
halds 20mm
Mator has built-in variable speed control for ideal operation
10-260
EDM
spins your
t,
toaling.
between
RPM. When looking to imprave burning times and accuracy
on conventional
econamically
EDM machines,
and efficienfty.
the Rota-Spindle
will do the job
Reliability backed by Harig's trademark
service.
FEATURES
• E-5 Rata-Spindle
E·20 Rota-Spindle
• Campatible
(PIN
170-100)
(PIN
uses collets from
175-100)
uses 20mm
I/lt to W'
toaling
with Harig Flush Chucks used for holding smaller
electrodes
• Adapts to all vertical ram conventional
Increases
EDM machines
cutting rate up to 50%
• Improves finish and electrode wear
• Allows excellent flushing far efficient aperation
PIN
PIN
Improves concentricity
170-100 Model E-5
175-100 Model E-20
and allows operatar
• Variable speed motar operates
to wark with "tenths"
on 11 OV from 10-260
RPM
•• Spindle housing is insulated fram motar
Current through spindle 10 amp max
Compact,
lightweight,
and easy to use
Includes spindle wrench, drive belt, and carrying case
• Full repair service and replacement
parts available
SPECS
0.0001"
Spindle runout
Mator
1/15
Variable speed
10-260
Weight
91bs
Flushport
1/8 ·27
horsepower
11 OV AC
RPM
NPT
~
ACCESSORIES
"~"'7.t
.-, .." ~~:1.~'':t
<it
"'11- .~.
~'~(_.•..• t
,4,.:
COLLET SET Of .2
P/N 170-70
• For E-5 Rota-Spindle (PIN 170-100)
.i"::'r~~~':"'.r,MW, •
Range from 0.039 - 0.512
• Individual collets also available
~~.~
~
E·20
COLLET CHUCK
PIN 161-100
12
• Allows E-20 Rota-Spindle to
accept collets
18
phone 847.647.9500
'ax 847.647.8351
TRU·DEX
Harig's tangent-radius
dresser is the most accurate, easiest to use, and safest
wheel dresser available.
lit convex,
2
degrees
Dresses wheels up ta 12" in diameter
and 5" concave radii.
with up to
Unique 24 division indexing every 15
makes grinding angles on the Tru-Dex easy, while tangent "throw"
1 '/1/' to either side of center facilitates tangent-radius
done at bottom of the wheel for highest accuracy.
rotates
and swings dresser
wheel.
Handwheel
job quickly
trademark
of
Dressing
in back of unit
arm, keeping hands safely away from grinding
When accurate wheel dressing is necessary,
the
dressing.
and efficiently.
the Tru-Dex will do
Reliability backed
by Harig's
service.
FEATURES
• Sturdy and dimensionally
stable cast iron housing
Hardened and ground base plate for minimum wear
Vernier graduated
to 5 minutes far quick setting of any angle with locking
screw
c.
Index plate with precision index pin locks in every 15 degrees to +/-10
seconds
Wheel shapes pcssible with Tru-Dex
• 2 adjustable
stops wark with stop pin to set accurate angles between
index locortons
Handwheel
14M
in back of unit controls both rotarton and offset movements
and keeps hands away from grinding wheel
Tangent "throw"
c Slide
1'/16
to either side of center
is under spring load to automartcally
drop into center
Ground "v" in dresser arm keeps diamond centered
SPECS
12" diameter
Dresses wheels up to
,
'!I
I.j\
I
,.J
lit convex,S"
Dresses radius up to
2
Center height
3.000"
Indexing every 1 5 degrees
to
+/-10
concave
seconds
'ilt from
Tangent "throw"
1
Weight
161bs
center
ACCESSORIES
PLANNER·GAGE
PIN 035-100
• I" width and beveled ways for minimum deflection
• Range
IN
O.D. DIAMOND
I.D. DIAMOND
NIB
NIB
PIN 91002
PIN 91003
to 10"
• Fastest way to set radii
• Includes case
"6
phone 847.647.9500
'ax
84'7_A47
.~I:'
SPIN-INDEXER
Harig's durable
capabilities
SC collet spin fixture offers
and is easily motorized.
machining applications,
"spinner"
Most complete
production
(PIN 120-100)
and makes
accurate
line of accessories
broadens
can
in forward
production
or
work easy.
applications.
wark is called for, the Spin-Indexer
to do the job even more efficiently.
trademark
plus"
for a variety of
Variable speed motor attachment
to Spin-Indexer
position,
"production
this unit quickly becomes the most useful
in your toolroom.
be mounted
rearward
Suitable
When
can be motorized
Reliability backed by Harig's
service.
FEATURES
• Sturdy and dimensionally
Large preloaded
stable cost iron housing
boll bearings are durable and accurate - ideal
for motorization
~ SC callet holder ground in assembly
to under 0.0001
runout
• 24 division index plate with precision index pin locks in every
PIN 122-100 Manual
15 degrees
to
+j-30
seconds
• Draw sleeve for quick set-ups of collets and accessories
Extended base for minimal deflection even with heavier ports
•
j{
1
diameter
mounting hole on top of housing for diamond
dresser
• Mounting holes on base of unit far use with Harig accessories
• Crank handle easily removed for motorized set-up
• Unique design allows for mounting of variable speed motar in
forward ar rearward
position
ports available
SPECS
.&~
1
Collet
sC up to 1"
Center height
4 ifs"
+1-
Spindle runout
0.0001
Spindle parallel to base
0.0002
30 secands
in 6"
Motor
1 lIS harsepower
Variable Speed
50-450
Weight
171bs
rpm
4.1250
"4mnm-n
5~
j~,~
14
phone 847.647.9500
-
'ax 847.647.8351
11 Ov AC
UNI·DEX
Harig's precision universal 5C collet indexing fixture can be used
for a wide variety of tool room and production applicatians.
arrangement
inspecting,
ensures extreme pasitioning accuracy when grinding,
milling, and boring. Minimal spindle runout means the
Uni·Dex is essentially
to work
Index
as accurate as yaur 5C collet and allows you
with "tenths".
rigidity and minimal
Extended
deflection
base
provides
exceptional
even with heavier
workpieces.
Increase the versatility af the Uni-Dex by pairing it with ane of the
many Horig accessories.
configuratian
When precise indexing in a 5C collet
is a must, trust the Uni-Dex to do the job accurately
and efficiently.
service.
FEATURES
Hordened and ground tool steel with salid one piece
construction
• Preloaded ball and race design provides highest accuracy
beoring
• 5C collet holder ground in assembly
• 360 degree graduated
ta under 0.00005
runout
dial for convenience
• 24 division index plate with precision index pin locks in every
15 degrees
• 2 adjustable
between
PIN 070-100
to
+/ 10
seconds
stops work with stop pin to set accurate angles
index lacations
• locking screw locks spindle at any position between indexes
• Draw sleeve for quick set-ups of collets and accessories
• Extended base for minimal deflection even with heavier parts
• Maunting holes on base of unit for use with Horig accessories
• lightest fixture af its kind for easy handling
• 1/1" 5C collet included
• Includes carrying case for protective,
dust-free storage
parts available
6~
SPECS
5~
®
Collet
5C up ta 1"
Center height
3.000"
Graduatian
360 degree
+/-
Spindle runaut
0.00005
Square and porallel to
0.0001
Weight
llibs
5£1
10 seconds
~31-J
l--5It
12
phone 847.647.9500
fax 847.647.8351
ULTRA-GRIND NO. 5C-Y
Harig's
enhanced
combination
I
version
of the
5C Colletfv-block
Harig line.
Quick,
maintaining
"tenths"
easy
Grind-All No.1;
this ultro-precise
fixture is the most versatile unit in the
changeover
from
collet to v-block while
accurocy, the Ultra-Grind is the toolraom solution
far grinding punches,
core pins, and EDM electrodes.
Also used for
precision indexing, inspecting, milling, boring, and radius dressing.
and purge port permits
bearing
is ideal
compliments
task.
EDM applications,
for motorization.
the
Colletfv-block
additional
Ultro-Grind.
Complete
When
fixture is needed,
Lube
while advanced
line of accessories
a precision
combination
the Ultra-Grind is up to any tool room
service.
FEATURES
Hardened and ground tool steel with solid one piece construction
"" Pre loaded boll and curved race design provides highest accuracy
bearing ideal for motorization
dial for convenience
2 4 division index plate with precision index pin locks in every 15
degrees
to +/10
2 adjustable
between
seconds
stops work with stop pin to set accurate angles
index locations
• Locking screw locks spindle at any position between
PIN 215-100
indexes
• U-Clamp and screw secure piece port in v-block
Removable
v-block makes accurote
5C collet use easy
• Lube and purge port permits more EDM applications
Narrow profile maximizes
work area under grinding wheel
• Mounting holes on base of unit far use with Harig accessories
Lightest fixture of its kind for easy handling
• 1j2" 5C collet included
Punch shapes possible with Ultra-Grind No. SC-V
Includes carrying case for protective,
dust-free starage
parts available
SPECS
7~
sa
II
@
sa
~
L.ooo-J
10
phone 847.647.9500
5C
V-Block Capacity
l1j/'
Collet
5C up to 1"
Center height
3.000"
Through hole
1 3/16"
Graduation
360 degree
+1-
10 seconds
Purge port
1/8 NPT topped entry port
Spindle runout
0.00005
V-Block within
0.0001
0.0001
Weight
14 Ibs.
fax 847.647.8351
DUO-FORM
Harig's dual-purpase
-'
facilitates
"throw"
.~
radius-tangent
wheel dresser & punch grinder
a greater variety of shope production.
allows DucrFarm to swing
and makes
radius to tangent
'I It to either
Unique tangent
side of center,
wheel dressing easy and efficient.
Straight angles and radii can be ground without removing punch
from v-black.
Timesaving
grinding
punches
dressing,
indexing,
fixture acts like two units in one, for
and EDM electrodes,
and inspecting.
precision
makes the DucrForm even more versatile.
is essential,
When high productivity
the DucrForm fits a variety of precision wheel dressing
and punch farming
trademark
radius-tangent
Complete line of accessories
applications.
Reliability backed
by Harig's
service.
FEATURES
Hardened and ground tool steel with solid one piece
construction
Prelaaded
boll and race design provides highest accuracy
bearing
V-Block adjusting screw allows for quick movement
+/- 0.0002
to within
of v-block
without topping
360 degree graduated
dial far convenience
24 division index plate with precision index pin locks in every
PIN 060-100
15 deg rees to +/-1 5 seconds
• 2 adjustable
between
stops wark with stop pin to set accurate angles
index locations
Locking screw locks spindle at any position between
Punch shapes possible with Duo-Form
U{lamp
indexes
and screw secure piece port in v-block
Handwheel
controls both rotation and offset movements
• Tangent "throw"
'/16" to either side of center
• Screws provided for locking slide plate off center
• Dresses wheels up to 10" in diameter
Mounting holes on base of unit for use with Harig accessories
• Includes carrying case far protective,
Full repair service and replacement
dust-free storage
ports available
Wheel shapes possible wilh DucrForm
12~
a
phone 847.647.9500
SPECS
V-Block Capacity
III/'
Center height
3.000"
Graduation
360 degree
+/- 15
seconds
Tangent "throw"
'IIt from
V-Block within
0.0002
0.0002
Weight
171bs.
fax 847.647.8351
center
GRIND-ALL NO.2
Harig's largest precision v-block fixture incorporotes
of the Grind-All NO.1 with greater capacity.
6 'Is" face-plate
larger
punches,
diameter
inspecting,
Uniquely designed
line of accessories
EDM electrodes.
to also mount horizontally.
rotary table
rotates the Grind-All NO.2 (PIN 021-100)
for milling and index table work.
block fixture
available.
Also used for
for high precision work within
includes apfional
required, the Grind-All NO.2
need for grinding
milling, boring, and rodius dressing.
Time tested to meet close taleronces
"tenths".
2" diameter v-block and
fits every toolroom's
core pins, and
precision indexing,
the advantages
Complete
mechanism
that
in the horizontal posifion
When precision v-block work is
is the most complete
Reliability backed
large capacity v-
service.
FEATURES
Hardened and ground tool steel with solid one-piece construction
• Prelaaded
boll and roce design provides highest accurocy bearing
~ Groduated 360 degrees
for convenience
• 24 division index plate with precision index pin locks in every 15
degrees
to +/1
~ 2 adjustable
between
0 seconds
stops work with stop pin to set accurote angles
index lacafions
• Locking screw locks spindle at any pasifion between
indexes
• U-Clamp and screw secure piece part in v-block
Removable
v-block for accurote face-plate
work
6 lis" diameter face plate has topped holes for mounfing
purposes
• Hand cronk for easy rotafian is removable when used
horizontally
• Opfianal rotary table mechanism
Punch shapes possible with Grind-All Na. 2
horizontal
provides geared ratafian in the
posifion
ports available
8~
SPECS
lid'~
ijj L,
~,~-+-~
V-Block Capacity
2"
Center height
4.000"
Through hole
13/16"
Face-plate diameter
6 lis"
Groduafian
360 degree
+1-
V-Block within
0.0001
0.0001
Weight
301bs.
10 seconds
06.886
6
phone 847.647.9500
fax 847.647.8351
GRIND-ALL NO.1
Harig's
benchmark
toolroom
precision
copied but never duplicated,
•...
v-block
productivity since 1951.
fixture
has
improved
The original potent holder,
is the most accurate indexer of its
kind available today. Time tested for high precision work within
"tenths,"
the Grind-All No.1 sets the standard
punches, core pins, and EDM electrodes.
indexing,
inspecting,
Complete
line of accessories
milling,
boring,
increase
far grinding
Also used for precision
and
radius
applications,
dressing.
and make
the Grind-All No.1 the most versatile v-block fixture ever.
20,000
units in action worldwide.
utmost importance,
close
Over
When accuracy is of the
the Grind-All No.1 enables you to work with
tolerances.
Reliability
backed
service.
FEATURES
Hardened and ground tool steel with solid one piece
construction
• Preloaded boll and race design provides highest accuracy
• V-Block adjusting screw allows for quick movement
v-block to
+1-
0.0001
of
without topping
• Single screw for fast locking of v-block
dial far convenience
• 24 division index plate with precision index pin locks in
PIN 010-100
every 15 degrees
• 2 adjustable
to
+1-
10 seconds
stops wark with stop pin to set accurate
angles between
index locations
• U-Clamp and screw secure piece part in v-block
• Removable v-block for accurate face-plate
• Narrow profile maximizes
work
work area under grinding wheel
• Mounting holes on base of unit for use with Harig
Punch shapes possible with Grind-All No.1
accessories
• lightest
fixture of its kind for easy handling
• Includes carrying case for protective dust-free storage
parts available
SPECS
@
4
phone 847.647.9500
V-Block Capacity
11j4"
Center height
3.000"
Through hole
1 3/16"
Graduation
360 degree
+1-
V-Block within
0.0001
0.0001
Weight
12 Ibs.
fax 847.647.8351
10 seconds
President's Letter
Karl Harig founded Harig Manufacturing in 1937. The company began as Brust & Harig in 1929, and survived
the Great Depression.
My father, Theodore Eckert, with only a 6th grade education, immigrated from Hofheim,
Germany at age 19, and began working with Mr. Harig in 1929.
I~
",J
,/
My Father's ingenuity and practicality was evident from the start, and the inventor in him began to shine. In
1951, this visionary man patented the now world-famous Harig Grind-All No.1 fixture, and the rest is history.
His simple quest was to help make tool & die making more precise and efficient.
From there emerged one
product after another - always with the same goal in mind. My father's" American Dream" of Harig Manufacturing
~
.~
(
,....
J".
( •J
Corporation as we know it today had begun.
Since that era, Harig has participated in the dynamic technological growth in the metalworking industry. Today
we are an up to date manufacturing operation, fully computerized with related CNCand CADtechnology.
r
~-".
-.J
•
J
Our skilled craftsmen continue to produce Harig "world class tools" to my father's original high standards.
Every
machinist improves upon the process, maintains the accuracy and reliability of every unit, and is backed by an
experienced and dedicated staff.
Now with third generation leadership, Harig is poised to meet the challenges of the new millennium. Our pursuit
of excellence continues as we develop additional innovative products to further my father's ideals, and allow our
customers to do their precision work efficiently and economically.
Harig's "American Dream" takes on an international
companies around the world.
flavor as our praducts are used by more and more
Our website, www.harigmfg.com. is constantly updated to provide the most current
information globally - it's the Internet Age!
We appreciate and thank our thousands of satisfied customers around the world. Harig's commitment to you is
to offer "world class tools" and "trademark service" for another 75 years and beyond.
Think about the first time that you used a Harig fixture.
Maybe you said, "Wow, this is really something!"
I
suggest you revisit us from time to time - sort of your journey back to the future. We live in a busy and exciting time,
but I try to take a moment from time to time to say "thanks."
Sincerely,
Theodore Eckert
President
Harig Manufacturing Corporation
Won't you join me?
/

Harig Mfg Catalog

Transcription

Similar documents

Paymentez User How To Guide en

Sharp Triangle Beads instruction

Help Document Open the URL – www.irctc.co.in Enter your login

neovisc_reimbursementassistance info_020513

Halloween Party Invitations

February 2016

press release

Anleitung Volksbank ENGLISCH.indd

USB232-DTHISO USB

TS850 power problem