Catalog: Tractor Parts - John Deere

Transcription

Hydraulic System Parts / Transmission & Rear Axle
A-AR34770*
Oil Line
Replaces: AR32653
2.2 Lbs.
A-AR108105
Disc, PTO Clutch
Replaces: AR78361
Dim/Info:
45 Internal Splines
5.250" O.D.
AGCO
ALLIS
For Models: 4020 SN<200999; Syncro Range, 600 SN<200999; Syncro Range /
CHALMERS Rear LH, Inner
DEUTZ
A-AR34769*
Oil Line
Replaces: AR32652
2.5 Lbs.
For Models: 4020 SN<200999; Syncro Range, 600 SN<200999; Syncro Range /
Rear LH, Outer
A-AR32313*
CNH
CASE-IH
Oil Line; Dual Selective Control
A-AR39128
Disc, Brake Piston/ Clutch Drum (Bronze) 0.12 Lbs.
Replaces: AR86461
2.4 Lbs.
For Models: 4020 SN <200999; Power Shift, 600 SN <200999; Power Shift / Rear
LH, Inner
A-AR32314*
Oil Line; Dual Selective Control
2.2 Lbs.
FORD / NEW
HOLLAND
Dim/Info:
45 Internal Splines
5.250" O.D.
For Models: (1020, 1520, 1530, 2020, 2030, 2155, 2355, 2840 ALL w/ hi-lo
trans), 2030 w/ hi-lo trans, SN <-187300, 2030 w/ hi-lo trans, SN 187301->, 2240
w/ hi-lo trans, SN <-349999, 2240 w/ hi-lo trans, SN 350000->, 2440 w/ hi-lo trans,
SN <-340999, 2630 w/ hi-lo trans, SN <-XXXXXX, 2640 w/ hi-lo trans, SN <-278950,
4030 w/ Quad, SN <-011988, 4230 w/ Quad, SN <-026633, 4430 w/ Quad, SN
<-041800, 4630 w/ Quad, SN <-015371
A-RE37011
Disc, Powershaft Clutch
Replaces: AT26632
FIAT
Dim/Info:
45 Internal Splines
5.250" O.D.
LH, Outer
A-AR34758*
Oil Line
Replaces: AR32311
2.3 Lbs.
BELARUS
BOBCAT
JCB
JOHN
DEERE
For Models: (1020, 1530, 2020, 2030 ALL w/ indp 540 PTO), 2040 w/ 540 PTO,
SN 350000->, (1020, 2020, 2030 ALL w/ indp 540-1000 PTO), 2240 SN <349999, 2240 SN 350000->, 2840
RH, Inner
A-AR34757*
Oil Line
Replaces: AR32312
0.12 Lbs.
2.6 Lbs.
A-RE27995
Disc, 4th Planetary Brake/ Cluch Pack
Replaces: R31404, RE23000
0.6 Lbs.
Dim/Info:
54 Internal Splines
7.005" O.D.
KUBOTA
LANDINI
RH, Outer
LEYLAND
LONG
For Models: (1020, 2020, 2030, 2355, 2555 ALL w/ reverser trans), 300B w/
reverser, 2240 w/ rev. trans, SN 350000->, (2155, 2355N ALL w/ directional reverser
trans), (2520, 4040, 4230 ALL w/ powershift), 2520 w/ powershift 2 plate clutch, 2520
w/ powershift 3 plate clutch, 2520 w/ powershift, w/ PTO, 4230 w/ powershift, SN <028120, 4430 w/ powershift, SN <-044988
A-RE37119
Plate\Disc Kit
0.59 Lbs.
McCORMICK
OTHER
RENAULT
For Models: (2010, 2520, 3020, 4000, 4010, 4020 ALL Syncro range), 4030
w/ Syncro/Quad, 4230 W/ Syncro/Quad SN <-037595, 4430 w/ Syncro/Quad SN
<-066737
SAME
A-RE37104
VALTRA
Disc, Syncro
0.12 Lbs.
Dim/Info:
3.250" I.D.
4.225" O.D.
VERSATILE
YANMAR
ZETOR
For Models: (2010, 2520, 4000, 4010, 4020 ALL Syncro range), 4030 w/ Syncro/
Quad, 4230 W/ Syncro/Quad SN <-037595, 4430 w/ Syncro/Quad SN <-066737,
4430 Syncro range
SCHWARTZ
SPEECO
106
*** Truck icon indicates the item is shipped via truck freight .***
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: sales@aiproducts.com
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
For Models: (1020, 1520 ALL w/ hi-lo shift), 1530 SN XXXXXX->, 2020 w/ hi-lo shift,
2030 w/ hi-lo shift, SN XXXXXX->, 2240, 2440 w/ independent 540-1000 PTO & hi-lo
trans, 2630 w/ hi-lo shift, SN XXXXXX->, 2640 w/ independent 540-1000 PTO & hi-lo
trans, 2955
MASSEY
FERGUSON
WHITE/
OLIVER
0.12 Lbs.
Transmission & Rear Axle
A-R27727
Plate, Trans.
0.1 Lbs.
Dim/Info:
4.125" O.D.
3.152" I.D.
Dim/Info:
55 Internal Splines
4.327" O.D.
For Models: (2010, 2520, 4000, 4010, 4020 ALL w/ Syncro), 4030 w/ Syncro\
Quad, 4230 w/ Syncro\Quad SN <-037595, 4320 w/ Syncro, 4430 w/ Syncro\Quad
SN <-066737
A-AL69559
Disc, Hi-Lo Clutch
Replaces: AL38239
0.24 Lbs.
Dim/Info:
45 Internal Splines
5.250" O.D.
0.26 Lbs.
Dim/Info:
7.770" O.D.
6.750" I.D.
Disc, PTO Clutch Assembly
1.2 Lbs.
Disc, Hi-Lo Brake & Clutch Assembly
0.6 Lbs.
Dim/Info:
9.530" O.D.
8.430" I.D.
A-AR94516
Disc, Direct Drive Clutch
Replaces: AR69611
MASSEY
FERGUSON
WHITE/
OLIVER
CNH
CASE-IH
FORD / NEW
HOLLAND
For Models: (4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755,
4760, 4850, 4955, 4960, 7600, 7700, 7800 ALL w/ powershift), (8560, 8570,
8760, 8770, 8870, 8960, 8970 ALL w/ 24 speed power sync)
A-RE28023
Disc, Transmission Front Clutch Pack
Replaces: AR43057, AR68352, AR87484, RE20133
Dim/Info:
54 Internal Splines
7.000" O.D.
0.76 Lbs.
BELARUS
Dim/Info:
42 Internal Splines
7.760" O.D.
Semi-Metallic
For Models: (4040, 4050, 4050E, 4055, 4240, 4250, 4250E, 4255, 4440, 4450,
4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960 ALL w/ powershift), 5010,
5020 SN <-024999, 5020 SN 025000->, 6030 SN <-35503, 6030 SN 035504->,
(7200, 7400, 7600, 7700, 7800 ALL w/ power quad), (4055, 4255, 4455 ALL w/
powershift (North American)), 4230 w/ powershift, SN 028121->, 4430 w/ powershift,
SN 044989->, (4055, 4255, 4455 ALL w/ powershift (European))
BOBCAT
JCB
For Models: (4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840 ALL w/ powershift)
A-AL55075
Disc, PTO Clutch
Replaces: AL28723
0.62 Lbs.
JOHN
DEERE
KUBOTA
Dim/Info:
19 Internal Splines
4.324" O.D.
0.68 Lbs.
Dim/Info:
95 Internal Splines
11.625" O.D.
9.452" I.D.
LANDINI
LEYLAND
For Models: 2040 w/ 540 PTO, SN350000->, 2155, 2240 SN 350000->, 2355,
2355N, 2555, 2755, 2855, 2940, 2955, 3055, 3155, 3255
Dim/Info:
6.608" I.D.
7.560" O.D.
0.63 Lbs.
Dim/Info:
42 Internal Splines
7.760" O.D.
OTHER
RENAULT
For Models: (2155, 2355, 2355N, 2555, 2755, 2855, 2940, 2955, 3055, 3255
ALL w/ hi-lo trans), 2240 w/ hi-lo trans, SN 350000->, (2440, 2640 ALL w/ hi-lo trans,
SN 341000->), 3155 w/ hi-lo clutch
A-AL69560
Disc, PTO Clutch
Replaces: AL38240
For Models: (4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560,
4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 ALL w/ powershift), 4430 w/
powershift, SN 044989->, 4630 w/ powershift, SN 016988->, 6110, 6120, 6200,
6210, 6215, 6220, 6300, 6310, 6320, 6400, 6410, 6415, 6420, 6500, 7200,
7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610, 7700, 7710,
7720, 7800, 7810, 7820, 7920, 8430, 8440, 8450, 8630, 8640, 8650, 8850
0.14 Lbs.
Dim/Info:
45 Internal Splines
5.250" O.D.
SAME
VALTRA
VERSATILE
YANMAR
ZETOR
For Models: 2155, 2355N, (2355, 2555 ALL w/ interchangeable PTO), (2755, 2855
ALL w/ indp 540 PTO)
fax: 1-800-511-0516
LONG
0.16 Lbs. McCORMICK
A-AL38238
Disc, Hi-Lo Clutch
Replaces: AL30687
For Models: (4050, 4050E, 4250, 4250E, 4450 ALL w/ powershift), (4055, 4255,
4455 ALL w/ powershift (North American)), 4230 w/ powershift, SN 028121->, 4430
w/ powershift, SN 044989->, (4055, 4255, 4455 ALL w/ powershift (European))
A&I PRODUCTS
DEUTZ
FIAT
0.4 Lbs.
A-RE23286
Disc, PTO Clutch Kit
Replaces: AR94517, RE65291
ALLIS
CHALMERS
Dim/Info:
48 Internal Splines
5.884" Minor I.D.
6.170" Major I.D.
11.01" O.D.
For Models: (4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755,
4760, 4850, 4955, 4960 ALL w/ powershift), (8560, 8570, 8760, 8770, 8870,
8960, 8970 ALL w/ 12 speed syncro & 24 speed power syncro)
A-RE33706
For Models: (4030, 4050, 4055, 4230, 4250, 4255, 4430, 4450, 4455, 4555,
4560, 4630, 4640, 4650, 4755, 4760 ALL w/ Quad), 8430, 8450, 8630, 8650,
8850
A-RE17162
Disc, Planetary Brake
Replaces: RE11099, AR69610, RE234305
AGCO
For Models: (4050, 4055, 4250, 4255, 4450, 4455 ALL w/ Quad), (4050, 4055,
4250, 4255, 4450, 4455 ALL w/ Quad, MFWD), 2520 w/ synco-range, (4040, 4240,
4440 ALL w/ Quad, syncro, & creeper), 4030 SN <-015963, 4030 SN 015964->,
4230 w/ synco-range, SN 037596->, 4230 w/ Quad, SN 037596->, 4430 w/ Quad &
syncro, SN 066738->, (4230, 4430 ALL SN <-XXXXXX)
A-AR94519
For Models: (2155, 2355, 2355N, 2555, 2755, 2855, 2955, 3055, 3155, 3255
ALL w/ hi-lo trans), (2355N, 2555, 2755, 2855 ALL w/ interchangable PTO)
A-RE29815
Disc, Brake Piston/ Clutch Drum
Replaces: AR54528, AR71560
A-RE36170
Disc, Transmission Drive Shaft Assembly 0.08 Lbs.
Replaces: AR77819
1-800-657-4343
SCHWARTZ
SPEECO
107
A-R33053
Disc, 4th Planetary Brake/ Cluch Pack
0.7 Lbs.
Dim/Info:
95 Internal Splines
9.670" O.D.
9.452" I.D.
AGCO
A-R64197
Plate, Hi-Lo Clutch
Replaces: AR86461
Dim/Info:
5.250" O.D.
3.903" I.D.
ALLIS
CHALMERS For Models: 2510 w/ powershift trans, (2520, 3020 ALL w/ powershift), 4000 w/
DEUTZ
powershift, SN 201000->, 4020 w/ powershift, 4230 w/ powershift, SN <-028120,
4430 w/ powershift, SN <-044988
Clutch Disc
WHITE/
OLIVER
0.3 Lbs.
Dim/Info:
8.875" O.D.
6.250" I.D.
For Models: (6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810 ALL W/ POWERSHIFT TRANSMISSION)
A-RE17420
Disc, Transmission & PTO Clutch
Replaces: AR60082, RE234306
CASE-IH
For Models: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440,
FORD / NEW 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760
Disc, Transmission Clutch
HOLLAND A-AR95827
1.68 Lbs.
Replaces: AR89320, AR67710, RE234264
FIAT
BELARUS
BOBCAT
JCB
KUBOTA
LANDINI
LEYLAND
LONG
For Models: (1020, 1520, 2020, 2030, 2355, 2555, 2630 ALL w/ reverser trans),
(2155, 2355 ALL w/ directional reverser trans), 2240 w/ reverser trans, SN 350000->,
2510 w/ powershift, hi range, 2520 w/ powershift, 300B w/ reverser, 3020 w/ powershift, SN 091409-122999, 3020 w/ powershift, SN 123000->, 4000 w/ powershift,
SN 201000->, 4020 w/ powershift, SN 132980->, 4020 w/ powershift, SN 201000>, 4230 w/ powershift, SN 028121->
Disc, Friction
0.4 Lbs.
Dim/Info:
7.5" O.D.
59 Teeth
For Models: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440,
4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 8430, 8450, 8630,
8640, 8650, 8850
For Models: (210C, 300D, 310C, 310D, 315C, 315CH, 315D, 482C ALL Reverse
Brake)
0.14 Lbs.
A-T100681
Disc, Steel
0.4 Lbs.
Dim/Info:
6.125" I.D.
3 Teeth
Dim/Info:
45 Internal Splines
5.256" O.D.
JOHN
DEERE
For Models: (210C, 300D, 310C, 310D, 315C, 315CH, 315D, 482C ALL Reverse
Brake)
For Models: 4030, 4230, 4430, 4050 w/ powershift, MFWD, (4050, 4055, 4250,
4255, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760 ALL w/ Quad), (4055,
4255, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960 ALL MFWD),
(4250, 4450 ALL w/ powershift, MFWD), (4050, 4555, 4560, 4650, 4755, 4760,
4850, 4955, 4960 ALL w/ powershift), 8430, 8450, 8630, 8650, 8850
A-T140926
Disc, Steel
0.2 Lbs.
Dim/Info:
3.9" I.D.
54 Teeth
A-RE62897
Disc, 1st 2nd & 3rd Planetary Brake
1 Lbs.
Replaces: AR94515, AR68345, AR48096, A1405R, AB4748R
For Models: (210C, 310C, 315C, 315CH ALL Forward Clutch), (300D, 310D, 315D
ALL Transmission), 482C Reverser Brake
Dim/Info:
104 Teeth
McCORMICK
A-L33163
Plate, Hi-Lo Clutch
OTHER
RENAULT
SAME
0.18 Lbs.
For Models: (2155, 2355, 2355N, 2555, 2755, 2855, 3055, 3155, 3255 ALL w/
hi-lo trans), 2240 w/ hi-lo trans, SN 350000->, (2440, 2640 ALL w/ hi-lo trans, SN
341000->), (2940, 2955 ALL w/ hi-lo clutch)
Dim/Info:
5.260" O.D.
3.910" I.D.
VALTRA
VERSATILE
A-L64752
Plate, PTO Clutch
For Models: (1020, 1520, 2020, 2840 ALL w/ hi-lo trans), 1530 w/ hi-lo trans, SN <XXXXXX, 2030 w/ hi-lo trans, SN <-187301, 2030 w/ hi-lo trans, SN 187301-XXXXXX,
2240 w/ hi-lo trans, SN <-349999, 2440 w/ hi-lo trans, SN <-278950, 2630 w/ hi-lo
trans, SN <-XXXXXX, 2640 w/ hi-lo trans, SN <-278950, (4030, 4040, 4050, 4055,
4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640,
SCHWARTZ 4650, 4755, 4760 ALL w/ Quad), 8430, 8440, 850, 850, 8630, 8640, 8650, 8850
ZETOR
108
0.27 Lbs.
Dim/Info:
5.200" O.D.
3.903" I.D.
.091" Thick
YANMAR
SPEECO
0.28 Lbs.
Dim/Info:
7.550"O.D.
6.625" I.D.
For Models: (4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840,
4850, 4955, 4960, 7600, 7700, 7800 ALL w/ pwr shift trans.)
A-R39259
Plate, Brake Piston & Clutch Drum
Replaces: AR86461
0.6 Lbs.
Dim/Info:
6.930" O.D.
4.750" I.D.
A-D50040
Dim/Info:
48 Internal Splines
12.037" O.D.
7.010" I.D.
A-RE29816
Disc, Brake Piston/ Clutch Drum
A-R39325
Plate, Transmission Rear Clutch Pack
Replaces: R32313
1.72 Lbs.
Dim/Info:
48 Internal Splines
12.000" O.D.
CNH
For Models: (1020, 1520, 2020, 2030, 2155, 2355, 2355N, 2555, 2755, 2855,
2940, 3055, 3155, 3255 ALL w/ hi-lo trans), (1530, 2030, 2630 ALL w/ hi-lo trans,
SN XXXXXX->), 2240 w/ hi-lo trans, SN <-349999, 2240 w/ hi-lo trans, SN 350000>, (2440, 2640 ALL w/ hi-lo trans, SN 341000->), (2440, 2640 ALL w/ hi-lo trans, SN
278951-340999), 2955 w/ hi-lo clutch
For Models: (2155, 2355, 2355N, 2555, 2755, 2855N ALL w/ indp 540 PTO),
(2355N, 2555, 2755, 2855N ALL w/ interchangable PTO), 2955, 3055, 3155, 3255
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY A-R96830
FERGUSON
0.18 Lbs.
A-R46391
Plate, Input Planetary
Replaces: R33873
0.76 Lbs.
A-R71035
Plate, PTO Clutch & Brake
Dim/Info:
7.032" O.D.
4.752" I.D.
Plate, Trans Drive Shaft Assembly
For Models: (4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4755, 4760,
4850, 4955, 4960 ALL w/ powershift), (4050, 4250, 4450 ALL w/ powershift MFWD),
(4055, 4255, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960 ALL
MFWD)
A-R71162
Plate, Input Planetary Piston
1.24 Lbs.
Dim/Info:
11.600" O.D.
9.710" I.D.
0.78 Lbs.
Dim/Info:
5.750" O.D.
3.897" I.D.
For Models: (2510, 2520 ALL w/ synco-range), 3020, 4000, 4020, 4030, 4040 w/
Quad, syncro, & creeper, (4050, 4055 ALL w/ Quad), 4230, 4240 w/ Quad, syncro, &
creeper, (4250, 4255 ALL w/ Quad), 4320, 4430, 4440 w/ Quad, syncro, & creeper,
(4450, 4455 ALL w/ Quad)
FIAT
5.12 Lbs.
Dim/Info:
10.995" O.D.
6.900" I.D.
BELARUS
For Models: (4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755,
4760, 4850, 4955, 4960 ALL w/ powershift)
1.04 Lbs.
A-R56548
Replaces: R81922, R59955
BOBCAT
JCB
0.88 Lbs.
JOHN
DEERE
Dim/Info:
7.770" OD
5.440" ID
KUBOTA
LANDINI
For Models: (4050, 4240, 4250 ALL w/ powershift), 4430 w/ powershift, SN
044989->, (4440, 4450, 4640, 4650, 4840, 4850 ALL w/ powershift)
For Models: (2510, 2520, 3020 ALL w/ powershift), 4000 w/ powershift, SN
201000->, (4020, 4040, 4050, 4050E, 4055, 4230, 4240, 4250, 4250E, 4255,
4430, 4440, 4450, 4455 ALL w/ powershift)
A-R77671
Disc, Steel
0.58 Lbs.
Dim/Info:
4.76" I.D.
6 Teeth
4.76 Lbs.
Dim/Info:
6.940" I.D.
LEYLAND
LONG
McCORMICK
OTHER
For Models: (4055, 4255, 4430, 4440, 4450, 4455 ALL Planetary Clutch), (8560,
8570, 8760, 8770, 8870, 8960, 8970 ALL PTO Clutch)
A-R46417
Plate, Planetary Brake B1 B2 B3 B4
Replaces: R43180
For Models: (4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4640, 4650,
4755, 4760, 4840, 4850, 4955, 4960 ALL w/ Quad), (4030, 4040, 4230, 4240,
4430, 4440, 4630 ALL w/ Quad & syncro trans.)
Plate, Brake Piston & Clutch Drum
CNH
CASE-IH
For Models: (4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755,
4760, 4850, 4955, 4960 ALL w/ powershift)
Dim/Info:
11.620" O.D.
9.700" I.D.
A-R50152
WHITE/
OLIVER
FORD / NEW
HOLLAND
A-R85626
Plate, C1 & C2 Clutch Assembly
Replaces: R70777
For Models: (2510, 2520, 3020 ALL w/ powershift), 3020 w/ powershift, SN <122999, 3020 w/ powershift, SN 123000->, 4000 w/ powershift, SN 201000->,
4020 w/ powershift, 4020 w/ powershift, SN <-200999, 4020 w/ powershift, SN
201000->, (4040, 4050 ALL w/ powershift), 4055 w/ powershift, (North American),
(4230, 4240, 4250 ALL w/ powershift), 4255 w/ powershift, (North American), (4430,
4440 ALL w/ powershift)
A-R61066
Plate, Trans Clutch & PTO
MASSEY
FERGUSON
For Models: (4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755,
4760, 4850, 4955, 4960 ALL Power Shift trans.)
A-R70856
A-R48236
Plate, Planetary Brakes/Clutch Pack
Replaces: R33872
0.58 Lbs.
Dim/Info:
10.820" O.D.
8.437" I.D.
DEUTZ
0.08 Lbs.
Dim/Info:
4.325" O.D.
3.605" I.D.
A-R48235
Plate, 4th Planetary Brake/Clutch Pack
AGCO
ALLIS
CHALMERS
For Models: 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 8560,
8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9400,
9420, 9520, 9620, (2510, 2520, 3020, 4020, 4040, 4050, 4230, 4250, 4450,
4650, 4850 ALL w/ powershift), 2510 w/ powershift, hi range, (2510, 2520 ALL w/
powershift, w/ PTO), 4000 w/ powershift, SN 201000->, 4240 w/ powershift, SN <XXXXXX, 4430 w/ powershift, SN <-044988, (4000, 4020 ALL less PTO, SN 201000>), 4000 w/ PTO, SN 201111->, 4020 w/ PTO
A-R63069
0.22 Lbs.
Dim/Info:
5.192" O.D.
3.938" I.D.
1.52 Lbs.
Dim/Info:
12.712" O.D.
10.600" I.D.
0.44 Lbs.
Dim/Info:
6.740" I.D.
RENAULT
SAME
VALTRA
VERSATILE
YANMAR
For Models: (4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840,
4850, 4955, 4960 ALL w/ power shift)
For Models: (4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440,
4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760 ALL w/ Quad), 8430,
8440, 8450, 8630, 8640, 8650, 8850
SCHWARTZ
SPEECO
A&I PRODUCTS
fax: 1-800-511-0516
ZETOR
1-800-657-4343
109
A-R59690
Plate, Main Clutch
Replaces: R54111
6.32 Lbs.
Dim/Info:
12.100" O.D.
6.940" I.D.
AGCO
ALLIS
CHALMERS
DEUTZ
A-L33563
Plate, PTO Clutch
Replaces: AL23113, AT32058
Dim/Info:
5.200" O.D.
3.903" I.D.
.179" Thick
For Models: (4555, 4560 ALL w/ Quad), 4630 w/ Quad & Syncro trans., (4640,
4650, 4755, 4760 ALL w/ Quad), 8430, 8440, 8450, 8630, 8640, 8650, 8850
Plate, 3rd/4th Planet Brake/ Output Clutch 0.6 Lbs.
Dim/Info:
7.770" O.D.
5.440" I.D.
WHITE/
OLIVER
For Models: 1020 w/ indp 540 PTO, 1520 w/ indp PTO, SN XXXXXX->, 1530 w/ indp
540 PTO, used w/ AL29818 drum, 2020 w/ indp PTO, used w/ AL29181 drum, 2030
w/ indp 540-1000 PTO, SN 187301->, used w/ AL29820 drum, 2040 w/ 540 PTO,
SN 350000->, 2155, 2240, 2355, 2355N, 2440, 2555, 2630 w/ indp 540-1000
PTO, 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255
A-T28665
Plate, Powershaft Clutch
For Models: (4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960 ALL w/ powershift)
A-T211833
Disc, Clutch Friction
Replaces: T44805
CNH
0.5 Lbs.
For Models: 1020 w/ indp PTO, 1520 w/ indp PTO, SN <-XXXXXX, 1530 w/ indp
540 PTO, used w/ AT32059 drum, 2020 w/ indp PTO, used w/ AT31784 drum, 2030
w/ indp PTO, 2240 w/ independent PTO, SN <-288761, 2440 w/ indp PTO, SN <305272, 2630 w/ indp PTO, 2640 w/ ind PTO, SN <-305272, 2840 SN <-288761
Dim/Info:
4.08" I.D.
76 Teeth
CASE-IH
A-AT101001
FORD / NEW For Models: (550, 550A, 550B, 555, 555A, 555B ALL First Range Clutch), (550,
HOLLAND 550A, 550B, 555, 555A, 555B ALL Second, Third & Forward/Reverse Clutch)
FIAT
A-T44804
Disc, Steel, Clutch
A-RE35512
LANDINI
0.8 Lbs.
Dim/Info:
8.850" O.D.
5.510" I.D.
60 Teeth
JCB
KUBOTA
0.1 Lbs.
Dim/Info:
5.25" O.D.
45 Teeth
0.3 Lbs.
Clutch Disc
BOBCAT
JOHN
DEERE
Disc, Friction
Dim/Info:
6" O.D.
45 Teeth
For Models: (550, 550A, 550B, 555, 555A, 555B ALL First Range Clutch), (550,
550A, 550B, 555, 555A, 555B ALL Second, Third Range & Forward/Reverse Clutch)
BELARUS
A-R96805
Plate, Clutch
3.22 Lbs.
Dim/Info:
9.750" O.D.
5.500" I.D.
LONG
For Models: 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020,
2030, 2040, 2040S, 210C Forward Clutch, 2120, 2130, 2140, 2150, 2255, 2350,
2440, 2550, 2630, 2640, 2840, 300D Transmission, 3030, 310C Forward Clutch,
310D Transmission, 3120, 3130, (315C, 315CH ALL Forward Clutch), 315D Transmission, 482C Reverser Brake, 830, 930
A-T28664
For Models: (6010, 6100, 6110, 6110L, 6120, 6200, 6200L, 6205, 6210, 6210L,
6220, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6400SP, 6405,
6410, 6410L, 6410S, 6420, 6420S, 6500, 6505, 6506, 6510, 6510L, 6510S,
6600, 6605, 6610, 6800, 6810, 6820, 6900, 6910, 6910S, 6920, 6920S, 7200,
7210, 7400, 7405, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810 ALL W/
POWRQUAD TRANSMISSION)
LEYLAND
0.64 Lbs.
Dim/Info:
4.917" O.D.
3.903" I.D.
Plate, PTO Clutch
0.26 Lbs.
Dim/Info:
5.185" O.D.
3.895" I.D.
For Models: 1530 w/ indp 540 PTO, 2040 w/ 540 PTO, SN 350000->, 2155, 2240,
2355 w/ independent PTO, 2440, 2555, 2630, 2640, 2755, 2840, 2855, 2940,
2955, 3055, 3155, 3255
A-L33125
Plate, PTO Clutch
Replaces: L33121
0.22 Lbs.
Dim/Info:
4.334" O.D.
3.388" I.D.
McCORMICK For Models: (6010, 6100, 6110, 6110L, 6120, 6200, 6200L, 6205, 6210, 6210L,
OTHER
RENAULT
SAME
6220, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6400SP, 6405,
6410, 6410L, 6410S, 6420, 6420S, 6500L, 6505, 6506, 6510, 6510L, 6510S,
6600, 6605, 6610, 6800, 6810, 6820, 6900, 6910, 6910S, 6920, 6920S, 7200,
7210, 7400, 7405, 7410, 7500, 7510, 7600, 7610, 7700, 7710, 7800, 7810 ALL
W/ POWRQUAD TRANSMISSION)
A-R96806
Plate, Clutch
3.95 Lbs.
For Models: 2040 w/ 540 PTO, SN350000->, 2155, 2240, 2355, 2355N, 2440
w/ hi-lo trans, SN 341000->, 2555, 2640 w/ hi-lo trans, SN 341000->, 2755, 2855,
2940, 2955, 3055, 3155, 3255
A-R57345
Replaces: R49129, R32313, R39325
Dim/Info:
10.875" O.D.
5.250" I.D.
VALTRA
0.54 Lbs.
Dim/Info:
6.930" O.D.
4.750" I.D.
VERSATILE
YANMAR
For Models: (6010, 6100, 6110, 6110L, 6120, 6200, 6200L, 6205, 6210, 6210L,
6220, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6400SP, 6405,
ZETOR
6410, 6410L, 6410S, 6420, 6420S, 6500L, 6505, 6506, 6510, 6510L, 6510S,
6600, 6605, 6610, 6800, 6810, 6820, 6900, 6910, 6910S, 6920, 6920S, 7200,
7210, 7400, 7405, 7410, 7500, 7510, 7600, 7610, 7700, 7710, 7800, 7810 ALL
SCHWARTZ W/ POWRQUAD TRANSMISSION)
SPEECO
110
For Models: 2240 w/ reverser trans, SN 350000->, (2440, 2640 ALL w/ reverser
trans), 300B w/ reverser, (2520, 3020, 4050, 4250, 4430, 4440 ALL w/ powershift),
(4000, 4020 ALL w/ powershift, SN 201000->), 4020 w/ PTO, SN <-200999, (4055,
4255 ALL w/ powershift, (North American)), 6030, 6030
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY
FERGUSON A-R77663
0.52 Lbs.
A-R112385
Plate, Trans & PTO Clutch
Replaces: R53789, R59688, R62285
9.36 Lbs.
A-T211817
Disc, Friction
Replaces: T82355
1.3 Lbs.
Dim/Info:
12.140" O.D.
6.940" I.D.
Dim/Info:
10.89" O.D.
38 Teeth
AGCO
ALLIS
CHALMERS
For Models: 4030, (4050, 4055, 4250, 4255, 4450, 4455 ALL w/ Quad), (4040,
4230, 4240, 4430, 4440 ALL w/ Quad & syncro)
For Models: 450C, 450D, 450E, 450G, 455D, 455E, 455G, 550, 550A, 550B, 550G,
555, 555A, 555B, 555G, 650G
A-R57330
A-T20717
Plate, Clutch
23.66 Lbs.
Clutch Separator Disc
1.3 Lbs.
Dim/Info:
8.12" I.D.
6 Teeth
For Models: 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 8430, 8440,
8450, 8630, 8640, 8650
A-R56547
Plate, Trans Rear Clutch Pack
MASSEY
FERGUSON
WHITE/
OLIVER
For Models: 450 Steering Clutch
0.76 Lbs.
A-RE53823
Differential Disc
0.8 Lbs.
Dim/Info:
9.000" I.D.
5.875" I.D.
47 Teeth
Dim/Info:
7.020" O.D.
4.758" I.D.
CNH
CASE-IH
For Models: 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320, 4350, 4430,
4440, 4450, 4455, 5010, 5020, 6030, 7600, 7700, 7800, 8440, 8450
For Models: 4040 w/ powershift
A-RE37120
A-R46418
Plate, Trans Rear Clutch Pack
Replaces: R43209, R59955, R81922
DEUTZ
Transmission Disc Kit
1.4 Lbs.
FORD / NEW
HOLLAND
FIAT
0.88 Lbs.
Dim/Info:
7.770" O.D.
5.435" I.D.
For Models: (4620, 4630, 6030 ALL W/ QUAD & SYNCRO RANGE TRANSMISSIONS),
(8430, 8630 ALL 4 X 4 Disk Synchronizer)
A-RE34786
For Models: 4240 w/ powershift, 4430 w/ powershift, SN 044989->, 4440 w/
powershift, (4520, 4620 ALL w/ powershift, SN <-XXXXXX), 4630 w/ powershift, SN
<-016987, (4640, 4840 ALL w/ powershift)
A-R46419
Plate, Indep PTO Clutch
Replaces: R43210
Transmission Disc
Dim/Info:
7.775" O.D.
5.430" I.D.
For Models: 4430 w/ powershift, 4430 w/ powershift, SN <-044988, 4430 w/ powershift, SN 044989->, (4520, 4620, 4630 ALL w/ powershift), 8430, 8440, 8630, 8640
A-R46416
Plate, Planetary Brake B2 & B4
Replaces: R43181
1.4 Lbs.
BOBCAT
Dim/Info:
11.225" O.D.
4.620" I.D.
54 Teeth
0.66 Lbs.
JCB
For Models: (6010, 6100, 6110, 6110L, 6120, 6200, 6200L, 6210, 6210L, 6220,
6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6410, 6410L, 6410S,
6420, 6420S, 6500, 6500L, 6506, 6510, 6510L, 6510S, 6520, 6600, 6610, 6620,
6800, 6810, 6820, 6900, 6910, 6910S, 6920, 6920S, 7200, 7210, 7400, 7405,
7410, 7500, 7510, 7600, 7610, 7700, 7710, 7800, 7810 ALL W/ POWRQUAD
TRANSMISSION)
A-R114215
Plate, Clutch
1.84 Lbs.
Dim/Info:
13.000" O.D.
9.250" I.D.
Dim/Info:
12.700" O.D.
10.590" I.D.
KUBOTA
LANDINI
LEYLAND
McCORMICK
For Models: 4430, (4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760
ALL w/ powershift trans), 4760 W/ QUAD TRANS, (4840, 4850, 4955, 4960 ALL w/
powershift trans), 8850
A-AR77005*
A-R116894
Plate, Clutch
JOHN
DEERE
LONG
For Models: (6010, 6100, 6110, 6110L, 6120, 6200, 6200L, 6210, 6210L, 6220,
6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6410, 6410L, 6410S,
6420, 6420S, 6500, 6500L, 6506, 6510, 6510L, 6510S, 6600, 6610, 6800, 6810,
6820, 6900, 6910, 6910S, 6920, 6920S, 7200, 7210, 7400, 7405, 7410, 7500,
7510, 7600, 7610, 7700, 7710, 7800, 7810 ALL W/ POWRQUAD TRANSMISSION)
Joint, Telescoping Universal; PTO Clutch 27.5 Lbs.
BELARUS
1.8 Lbs.
OTHER
RENAULT
SAME
1 Lbs.
Dim/Info:
8.375" O.D.
4.625" I.D.
VALTRA
VERSATILE
YANMAR
For Models: (6010, 6100, 6110, 6110L, 6120, 6200, 6200L, 6210, 6210L, 6220,
6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6410, 6410L, 6410S,
6420, 6420S, 6500, 6500L, 6506, 6510, 6510L, 6510S, 6600, 6610, 6800, 6810,
6820, 6900, 6910, 6910S, 6920, 6920S, 7200, 7210, 7400, 7405, 7410, 7500,
7510, 7600, 7610, 7700, 7710, 7800, 7810 ALL W/ POWRQUAD TRANSMISSION)
For Models: 8850
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
ZETOR
SCHWARTZ
SPEECO
111
A-RE34784
Transmission Disc
1.1 Lbs.
AGCO
Plate, Clutch
A-R96791
2 Lbs.
A-R86308
Plate, Clutch
For Models: (6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8100T,
8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300,
8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T,
8520, 8520T ALL W/ POWERSHIFT TRANSMISSION)
FIAT
For Models: (6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810 ALL W/ POWER
SHIFT TRANSMISSION)
A-RE151059
Clutch Disc
A-L78682
LANDINI
For Models: (6010, 6110, 6110L, 6120, 6210, 6210L, 6220, 6310, 6310L,
6310S, 6320, 6410, 6410L, 6410S, 6420, 6420S, 6510, 6510L, 6510S, 6610,
6810, 6820, 6910, 6910S, 6920, 6920S, 7405, 7500 ALL W/ POWRQUAD TRANSMISSION), (6100, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 6506,
6600 ALL SN 128112> W/ POWRQUAD TRANSMISSION), (6800, 6900 ALL SN
128098> W/ POWRQUAD TRANSMISSION), (7210, 7410, 7510, 7610, 7710, 7810
ALL SN 128055> W/ POWRQUAD TRANSMISSION)
A-RE35517
Transmission Disc
LONG
For Models: 6010, 6100, 6110, 6110L, 6120, 6200, 6200L, 6205, 6210, 6210L,
6220, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6400SP, 6405,
6410, 6410L, 6410S, 6420, 6420S, 6500, 6500L, 6505, 6506, 6510, 6510L,
6510S, 6600, 6605, 6610
A-R135537
Brake Disc
For Models: (7600, 7700, 7800 ALL W/ POWERSHIFT TRANSMISSION)
A-PBK500
Planetary Brake Kit
SHIFT TRANSMISSION)
A-RE62896
Transmission Disc
RENAULT
SAME
VALTRA
1.3 Lbs.
Dim/Info:
7.000" O.D.
2.570" I.D.
39 Teeth
For Models: 3020
A-PSK100
Powershift Clutch Kit C1, C2 & Rear PTO11.81 Lbs.
Dim/Info:
If C1, C2 & rear PTO clutch piston seals
have been updated to the o-ring style use kit
# A-PSK120 .
(9) A-AR94516 (7) A-R46391 (2) A-R57345
(2) Pump Gskt (8) Seals (6) Bolts
VERSATILE A-RE65324
Transmission Disc
1.5 Lbs.
Dim/Info:
7.000" O.D.
2.545" I.D.
39 Teeth
YANMAR
ZETOR
17.82 Lbs.
Dim/Info:
Kit contents cover all tractor serial numbers.
(4) A-AR94516 (4) A-R48235 (8) A-R33053
(3) A-R46391 (2) A-R57345 (3) A-RE27995
(12) Seals
McCORMICK For Models: (6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810 ALL W/ POWEROTHER
2.57 Lbs.
Dim/Info:
14.500" O.D.
10.500" I.D.
0.6 Lbs.
Dim/Info:
9.230" O.D.
7.380" I.D.
110 External Teeth
LEYLAND
0.49 Lbs.
Dim/Info:
5.250" O.D.
2.250" I.D.
20 Teeth
Dim/Info:
11.500" O.D.
8.875" I.D.
87 Teeth
BOBCAT
KUBOTA
Transmission Disc
2.3 Lbs.
BELARUS
JOHN
DEERE
1.4 Lbs.
Dim/Info:
14.000" O.D.
10.625" I.D.
1.27 Lbs.
Dim/Info:
7.625" O.D.
4.500" I.D.
FORD / NEW
HOLLAND
JCB
Transmission Plate
For Models: (6100, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6506, 6600,
6800, 6900, 7200, 7210, 7400, 7405, 7410, 7500, 7510, 7600, 7610, 7700,
7710, 7800, 7810 ALL W/ POWRQUAD TRANSMISSION)
A-R107264
3.14 Lbs.
Dim/Info:
12.000" O.D.
8.250" I.D.
Dim/Info:
13.000" O.D.
9.250" I.D.
CASE-IH
Transmission Clutch Plate
For Models: 3020 SN <-122999
For Models: (6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810 ALL W/ POWER-
SCHWARTZ SHIFT TRANSMISSION)
SPEECO
112
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
A-R95313
1.72 Lbs.
6410L, 6410S, 6510, 6510L, 6510S, 6610, 6810, 6910, 6910S, 7200, 7400,
7600, 7700, 7800 ALL W/ POWRQUAD TRANSMISSION), (6100, 6200, 6200L,
MASSEY 6300, 6300L, 6400, 6400L, 6500, 6500L, 6506, 6600 ALL SN <128111 W/
FERGUSON POWRQUAD TRANSMISSION), (7210, 7410, 7610, 7710, 7810 ALL SN <128054
W/ POWRQUAD TRANSMISSION), (6800, 6900 ALL SN <128097 W/ POWRQUAD
WHITE/ TRANSMISSION)
DEUTZ
CNH
Transmission Plate
Dim/Info:
9.250" O.D.
4.500" I.D.
ALLIS
CHALMERS For Models: (6010, 6110, 6110L, 6210, 6210L, 6310, 6310L, 6310S, 6410,
OLIVER
A-R95211
Dim/Info:
11.500" O.D.
8.750" I.D.
87 Teeth
A-PSK120
A-PSK220
Powershift Clutch Kit C1, C2 & Rear PTO 15.3 Lbs.
Dim/Info:
(9) A-AR94516 (7) A-R46391
(2) A-R57345 (2) Pump Gskt (8) Seals
each for the following pistons: Oil Pump,
C1, C2 & Rear PTO (6) Torque Bolts
Dim/Info:
(12) A-AR94516 (12) A-R46391 (2) Pump
Gaskets (2) Seals for the following pistons: Oil
Pump, C1, C2 & Rear PTO (6) Torque Bolts
For Models: 3020 SN 123000->
For Models: 4230 SN <-028120
A-R76731*
Plate, Pressure Clutch
USED IN: TORSIONAL DAMPER (POWER SHIFT)
Replaces: R56720
8.25 Lbs.
A-PSK260
Dim/Info:
(11) A-RE23286 (9) A-R46418 (2) A-R56548
(2) Pump Gskts (8) Seals each for the following
pistons: Oil Pump, C1, C2 & Rear PTO (6)
Torque Bolts
A-PSK280
Dim/Info:
(12) A-RE23286 (12) A-R46419 (2) Pump
Gskts (8) Seals for the following pistons: Oil
Pump, C1, C2 & Rear PTO (6) Torque Bolts
A-PSK300
Dim/Info:
(11) A-RE23286 (11) A-R46419 (2) Pump Gskt
(8) Seals for the following pistons: Oil Pump,
If C1, C2 & rear PTO clutch piston seals
have been updated to the o-ring style use
kit # A-PSK160 .
(11) A-AR94516 (8) A-R46391
(3) A-R57345 (2) Pump Gskt (8) Seals
each for the following pistons: Oil Pump,
A-PBK560
Planetary Brake Kit
Dim/Info:
(11) A-AR94516 (8) A-R46391 (3) A-R57345
(2) Pump Gskt (8) Seals each for the following
Torque Bolts
20.48 Lbs.
Dim/Info:
(5) A-R48236 (4) A-R48235 (9) A-RE17162
(1) A-R77671 (3) A-R57345 (4) A-AR94516
(10) Piston Seals
FIAT
BELARUS
BOBCAT
A-PBK580
Planetary Brake Kit
Dim/Info:
(11) A-AR94516 (9) A-R46391 (2) A-R56547
(2) Pump Gaskets (8) Seals for the following
Torque Bolts
23.92 Lbs.
Dim/Info:
(7) A-R48236 (4) A-R48235 (11) A-RE17162
(1) A-R77671 (3) A-R57345 (4) A-AR94516
(10) Piston Seals
Dim/Info:
(12) A-RE23286 (9) A-R46418 (3) A-R46419
(2) Pump Gskt (8) Seals for the following
Torque Bolts
For Models: 4040
20.2 Lbs.
KUBOTA
LANDINI
LONG
McCORMICK
OTHER
RENAULT
For Models: 4440 SN 027784->
A-PSK360
JOHN
DEERE
LEYLAND
For Models: 4430, 4440 SN <-027783
For Models: 4020 SN 132980-144512
Dim/Info:
(4) A-AR94516 (4) A-R48235 (8) A-R33053
(3) A-R46391 (2) A-R57345 (3) A-RE27995
(12) Seals
HOLLAND
JCB
For Models: 4430 SN 044989->
For Models: 4020 SN <-132979
Planetary Brake Kit
CASE-IH
Dim/Info:
A-PBK540
CNH
For Models: 4430 SN <-044988
For Models: 4000, 4020 SN 144513->
A-PSK200
WHITE/
OLIVER
Powershift Clutch Kit C1, C2 & Rear PTO16.85 Lbs. FORD / NEW
Dim/Info:
(12) A-AR94516 (9) A-R46391
(3) A-R57345 (2) Pump Gskt (8) Piston
Seals each for the following pistons: Oil
Pump, C1, C2 & Rear PTO (6) Bolts
A-PSK160
MASSEY
FERGUSON
For Models: 4240, 4440
A-PSK140
DEUTZ
27.58 Lbs.
Dim/Info:
(8) A-R48236 (4) A-R48235 (12) A-R33053
(4) A-R46391 (4) A-RE27995 (12) Seals
A-PSK180
ALLIS
CHALMERS
For Models: 4230 SN 028121->
For Models: 4040, 4230 SN: 016359 >, 4240, 4240 EURO EDITION, 4430 SN:
022373 >, 4440, 4440 EURO EDITION, 4630 SN: 008455 >, 4640, 4840
Planetary Brake Kit
Dim/Info:
(11) A-AR94516 (9) A-R46391 (2) A-R56547
(2) Pump Gskt (8) Seals for the following
Torque Bolts
Dim/Info:
ID: 9.630"
THICKNESS: .375"
NUMBER OF TANGS: 3
A-PBK520
A-PSK240
AGCO
SAME
VALTRA
VERSATILE
YANMAR
ZETOR
SCHWARTZ
SPEECO
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
113
A-PBK600
Planetary Brake Kit
AGCO
ALLIS
CHALMERS
DEUTZ
27.09 Lbs.
A-R70027
Spring, Return C1, C2, C3, PTO Clutch Pack
0.1 Lbs.
Dim/Info:
Kit contents cover late tractor serial numbers.
(5) A-R46416 (4) A-R46417 (9) A-RE62897
(3) A-R46418 (3) A-RE23286 (10) Seals
For Models: 4520, 4620, 4630
For Models: 4240, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650,
4755, 4760, 4840, 4850, 4955, 4960, 6800, 6810, 6820, 6900, 6910, 6910S,
6920, 6920S, 710C, 710D SN <-872328, 7200, 7210, 7400, 7405, 7410, 7420,
7500, 7505, 7510, 7515, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810,
7820, 7920, 8430, 8440, 8450, 8630, 8640, 8650, 8850, 760A
A-R67840
WHITE/
OLIVER
Spring, Return C1, C3 or PTO Transmission Clutch Pack
0.1 Lbs.
For Models: 4555, 4560, 4640, 4650, 4755, 4760, 8430, 8440, 8450, 8630,
8640, 8650, 8850
A-PSK320
CNH
Dim/Info:
(10) A-RE23286 (4) A-RE28023 (11) A-R46418
(2) A-R51676 (1) A-R77663 (3) Pump Gskt (2)
Seals for the following pistons: Oil Pump, C1, C2
& Rear PTO (6) Torque Bolts
CASE-IH
FORD / NEW
HOLLAND For Models: 4630 SN <-016987
FIAT
A-PSK340
Dim/Info:
(13) A-RE23286 (10) A-R46418 (2) A-R51676
(1) A-R77663 (3) Pump Gskt (8) Seals for the
following pistons: Oil Pump, C1, C2 & Rear PTO
(6) Torque Bolts
BELARUS
BOBCAT
A-R52499
Drum
1.7 Lbs.
For Models: 4630 SN 016988->
A-PBK620
Planetary Brake Kit
31 Lbs.
Dim/Info:
(6) A-R46416 (4) A-R46417
(10) A-RE62897 (4) A-R46418
(4) A-RE23286 (10) Seals
JCB
JOHN
DEERE
KUBOTA
For Models: 2510, 2520, 3020, 4000, 4020, 4040, 4050, 4055, 4230, 4250,
4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8560,
8570, 8760, 8770, 8870, 8960, 8970, 9100, 9200, 9300, 9320, 9400, 9420,
400G, 410B, 410C, 410D, 415B, 450 SN 11789->, 450B, 450C, 450D, 450E, 455D,
455E, 500C, 510, 510B, 510C, 510D, 515B, 610B, 610C, 655 SN <-714909, 710B,
710C, 710D SN <-872328, 755, (750, 755A, 850, 855 ALL SN <-714909), 500,
500A, 500B, 600
For Models: 2010, 3010, 4010
A-R31026
Drum
1.6 Lbs.
For Models: 4640 SN <-012830 W/ R60365 31/32" Planetary Brake Backing Plate
A-PBK640
Planetary Brake Kit
35.8 Lbs.
Dim/Info:
(8) A-R46416 (4) A-R46417
(12) A-RE62897 (4) A-R46418
(4) A-RE23286 (10) Seals
LANDINI
LEYLAND
For Models: (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020 ALL Syncro
Range), 4030 Syncro Range S/N <-015963, 4230 Syncro Range S/N <-037595,
(4320, 440C, 440D ALL Syncro Range), 4430 Syncro Range S/N <-066737, (448D,
440, 440A, 440B ALL Syncro Range)
A-R31028
Synchronizer
1.05 Lbs.
LONG
For Models: 4640 SN 012831-> W/ R43139 3/8" Planetary Brake Backing Plate
McCORMICK A-PSK380
Dim/Info:
(15) A-RE23286 (12) AR46418 (3) A-R56548 (2)
Pump Gskt (8) Seals for the
following pistons: Oil Pump, C1,
C2 & Rear PTO (6) Torque Bolts
OTHER
RENAULT
SAME
VALTRA
A-R51676
Separator Plate, Wavy .09" Thick
For Models: (2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020 ALL Syncro
Range), (340D, 4320, 440D, 448D, 440, 440A, 440B ALL Syncro), 4030 Syncro
Range S/N <-015963, 4230 Syncro & Quad Range S/N <-037595, 4430 Syncro S/N
<-066737
A-JD8978
Timken Cone
0.64 Lbs.
1 Lbs.
VERSATILE
YANMAR
ZETOR
For Models: (2630, 2640, 4000, 4020, 4230, 600 ALL Transmission Drive Shaft)
For Models: 4630, 8430, 8440, 8450, 8630, 8640, 8650, 8850
SCHWARTZ
SPEECO
114
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
A-AR87999
Syncronizer Disc Kit
3.9 Lbs.
MASSEY Kit contains 10 Discs & 10 Plates (A & I KIT DOES NOT CONTAIN RETAINFERGUSON ERS)
A-T14340
Steering Clutch Disc
0.62 Lbs.
A-F1228R
Clutch Drive Disc
10.92 Lbs.
Dim/Info:
20 Teeth
6 Spline
9.940" Dia.
AGCO
ALLIS
CHALMERS
For Models: 2010 Crawler
A-T14339
Steering Clutch Disc
1.15 Lbs.
Clutch Drive Disc
22.62 Lbs.
DEUTZ
MASSEY
FERGUSON
Dim/Info:
20 Teeth
6 Spline
9.940" Dia.
For Models: 2010 Crawler
A-B158R
For Models: 70, 720, 730
A-A4028R
Dim/Info:
7.000" I.D.
10.875" O.D.
.093" Thickness
.618" Tab Width
6 Tabs
WHITE/
OLIVER
For Models: A
Clutch Facing, Pulley
0.32 Lbs.
Dim/Info:
7.9" O.D.
4.9" I.D.
A-RE29790
Lining, Pulley Brake
Replaces: AB4748R, F1405R
0.3 Lbs.
Dim/Info:
sold in multiples of 2
CNH
For Models: A, B, 50, 520, 530, 60, 630, 70, 720, 730
For Models: BO, BR, B SN <200999
A-A141R
Toggle, Clutch
0.1 Lbs.
A-B3731R
Clutch Drive Disc
CASE-IH
13.6 Lbs.
FORD / NEW
HOLLAND
Dim/Info:
3 Used
FIAT
For Models: A, AO, AR
A-R90219
Pulley Clutch Facing w/o Rivets
Replaces: B2357R
0.24 Lbs.
A-A4355R
Dim/Info:
6.980" O.D.
4.145" I.D.
.156" Thick
Clutch Sliding Drive Disc
5.88 Lbs.
Dim/Info:
20 Spline
10" O.D.
BELARUS
BOBCAT
For Models: 50, 520, 530, B SN 201000>
A-AA6129R
2.08 Lbs.
JCB
For Models: 60, 620, 630, 70, 720, 730
A-A4391R
Clutch Drive Disc
20.7 Lbs.
Dim/Info:
20 Teeth
6 Spline
9.940" Dia.
KUBOTA
LANDINI
For Models: 60, 620, 630, 70, 720, 730
A-RE29785
Clutch Disc
Replaces: AR1052R
2.5 Lbs.
For Models: 60
A-A5642R
Clutch Drive Disk
22.22 Lbs.
Dim/Info:
20 Teeth
6 Spline
9.940" Dia.
0.38 Lbs.
Dim/Info:
10.0" O.D.
6.87" I.D.
McCORMICK
OTHER
A-R33552
Plate, Clutch
Replaces: R26657
20 Lbs.
RENAULT
SAME
VALTRA
For Models: (4000, 4020 ALL S/N <223269), 600 S/N 145660>
For Models: 60, 620, 630, 70, 720, 730, A, D, G, GP
A-B2354R
LEYLAND
LONG
For Models: 80, 820, 830, R
A-C614R
JOHN
DEERE
0.26 Lbs.
A-LVU11630
Spacer, Torsional Damper
3 Lbs.
Dim/Info:
9.500" O.D.
.313" Thickness
Dim/Info:
6.94" O.D.
4.10" I.D.
VERSATILE
YANMAR
ZETOR
For Models: (COMPACT TRACTOR: 4200, 4210, 4300, 4400)
SCHWARTZ
SPEECO
For Models: 50, 520, 530, B SN 201000>
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
115
A-RE28721
Belt, Transaxle Driven Clutch
0.95 Lbs.
Dim/Info:
56.122" Effective Length
AGCO
1.189" Width
.402" Thick
ALLIS
For Models: (UTILITY VEHICLE: 4X2 GATOR, TURF GATOR), (LAWN/GARDEN TRACCHALMERS TOR: 1200A SN 925553>), (UTILITY VEHICLE: 622, 626, AMT600)
DEUTZ
A-C74R
Dog, Clutch
0.4 Lbs.
Sleeve, Main Clutch Release
2.2 Lbs.
For Models: 5415H, 5615, 5715, 5715HC, 5415 Narrow W/ Syncshuttle Transmission, (5225, 5325, 5425, 5425H, 5425HC, 5425N, 5525, 5625, 5625HC, 5725,
5725H, 5725HC, 5725N ALL W/ Syncshuttle Transmission)
A-YZ91199
Dim/Info:
3 Used
Sleeve, Traction Clutch
2.95 Lbs.
WHITE/
OLIVER
For Models: (6403, 6603 ALL North American, Mexican, South Africa & Asian Editions)
For Models: 620, 630, 70, 720, 730, A, AO, AR, D, G, GH, GN, GP, GW
A-T22219
CNH
CASE-IH
FORD / NEW
HOLLAND
Shaft, Clutch
7.48 Lbs.
A-R51469
Carrier, Clutch Release Bearing
A-T21452
1.85 Lbs.
FIAT
For Models: (1020, 1520 ALL L/ Reverser), 1530, (2020, 2030, 2440, 2630, 2640,
300, 301, 301A, 302, 400, 401, 401B, 401D ALL L/ Reverser)
A-T30791
BELARUS
BOBCAT
JCB
JOHN
DEERE
Shaft, Clutch
5.26 Lbs.
Dim/Info:
15 / 16 Spline
23.125" Long
For Models: 1020, 1030, 1120, 1130, 1140, 1350, 1520, 1530 SN 178601179600, 1550, 1630, 1750, 1830, 1850, 2020, 2030 SN <187300, 2120, 2130,
2150, 2155, 2350, 2355, 820, 830, 840, 940, 1040
A-R141075
Sleeve, Main Release
1.9 Lbs.
KUBOTA
LANDINI
LEYLAND
LONG
For Models: 5103, 5203, 5303, 5320N, 5403, 5415, 5420N, 5503, 5520N, 5605,
5705, 5715, (5220, 5320, 5420, 5425, 5520, 5625, 5725 ALL W/ Collar Shift Or
Syncshuttle Transmission), (5425N, 5725N ALL W/ Syncshuttle Transmission), 5210 W/
Collar Shift Trans. W/O Cab SN 321723>; W/ Cab SN 321726>, 5310, 5410, 5510,
5210 W/ Syncshuttle Trans. W/O Cab SN 321730>; W/ Cab SN 321727>, 5310,
5410, 5510
McCORMICK A-R139804
Sleeve, Main Release
0.11 Lbs.
Spring, Extension, Clutch Pedal
0.11 Lbs.
Dim/Info:
O.D.: .94"
Free Length: 10.34"
For Models: 1020, 1030, 1120, 1130, 1520 LESS REVERSER, 1530, 1630, 1640,
1830, 2030, 2030 LESS REVERSER, 2040, 2040 LESS REVERSER, 2040 SN: <
349999, 2040S, 2120, 2150, 2240 SN: < 349999, 2255, 2350, 2355, 2440 LESS
REVERSER, 2550, 2555, (2630, 2640 ALL LESS REVERSER), 2755, 2855N, (300B,
301A, 302, 302A, 401B, 401C ALL LESS REVERSER), 820, 830, 920, 930, 300,
(301, 400, 401 ALL LESS REVERSER)
A-T21998
Bushing, Clutch Pedal
0.04 Lbs.
Dim/Info:
O.D.: 1.063"
I.D.: 1.005"
Length: 1.500"
For Models: 1020, 1030, 1120, 1130, 1520 LESS REVERSER, 1530, 1630, 1641F,
1830, 2020 LESS REVERSER, 2030, 2030 LESS REVERSER, 2040 SN: 350000 >,
210C SN: 745704 >, 2150, 2240 SN: 350000 >, 2255, 2350, 2440, 2550, (2630,
2640 ALL LESS REVERSER), 2750, 2840, (300B, 301A, 302, 302A ALL LESS REVERSER), 310A, 310B, 310C, 315C, 401C LESS REVERSER, 410, 410B, 410C, 415B,
500C, 510, 510B, 510C, 515B, 610B, 610C, 710B, 710C, 820, 830, 920, 300, 301
LESS REVERSER, 310, (400, 401 ALL LESS REVERSER)
A-T21445
Bushing
Located between steering case and shaft by drag link arm.
Replaces: L64255
0.1 Lbs.
Dim/Info:
1.875" O.D.
1.750" I.D.
.950" Wide
For Models: 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2010, 2020,
2030, 2040, 2120, 2130, 2155, 2240, 2355, 2355N, 2440, 2555, 2630, 2640,
2755, 2840, 2855, 2855N, 2940, 2955, 300B IND, 301A, 302, 302A IND, 3030,
3120, 3130, 401B, (401C, 410 ALL IND), 820, 830, 920, 930, 300, 301, (310, 380
ALL IND), 400, 401, (480, 480A, 480B ALL IND)
RENAULT
VALTRA
Spring, Clutch Pedal
2.5 Lbs.
OTHER
SAME
A-T28801
Dim/Info:
O.D.: .94"
Free Length: 3.88"
For Models: 1830, (2030, 2130 ALL W/ CAB), 2140 SN: 430000 >, 2750, 2840,
2940, 2950, 2955 SN: < 765516, 3030, 3120, 3130
Dim/Info:
19 Teeth
23 Splines
20.000" Long
For Models: 820, 830, 840, 920, 940, 1020 SN <117499, 1030, 1040, 1120,
1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1830, 1850, 2020, 2030,
2040 SN <349999, 2120, 2150, 2155, 2240 SN <349999, 2350, 2355
For Models: 5105, 5205, (5203, 5310S ALL India Edition), (5103S, 5203 ALL Asian
Edition)
A-R137608
Sleeve, Clutch Main Release
2 Lbs.
VERSATILE
A-R31131
Pin, Clutch Lever
0.14 Lbs.
For Models: 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440,
4630, 4640, 8430, 8440, 8450, 8560, 8630, 8640, 8650, 8760, 8850, 8960,
500, 600
A-AR31906
JD Main Lever
1 Lbs.
YANMAR
ZETOR
For Models: 5210, 5310, 5310N, 5410, 5415, 5510, 5510N, 5615, 5715, (5200,
5300, 5400, 5500 ALL W/ Collar Shift Or Top Shaft Syncronized Transmission), (5400N,
5500N ALL W/ Syncronized Reverser Transmission), (5625, 5725 ALL W/ Syncshuttle
Transmission)
SCHWARTZ
SPEECO
116
For Models: (3010, 3020 ALL SN <-067999, SYNCHRO-RANGE), (3010, 3020 ALL
SN 068000->, SYNCHRO-RANGE), (4000, 4010 ALL SYNCHRO-RANGE), 4020, 4320
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY
FERGUSON
A-R225871
A-R26804
Cap Screw
Not Req on tractors Less PTO
0.5 Lbs.
7/16" PTO Bolt
0.08 Lbs.
For Models: 4010, 4020, 4320, 4520, 4620
A-R141077
Gear, 2nd & 6th
4.08 Lbs.
Dim/Info:
36 / 20 TEETH
For Models: 2520, 3010, 3020, 4000, 4010, 4020, 500C, 500, 500A, 500B, 600
S/N <202237
A-R55184
A-L28664
PTO Release Collar
1.7 Lbs.
AGCO
For Models: 2040S, 2130, 2140, 2555, 2630, 2640, 2750, 2755, (1550, 1750,
1850, 2155, 2250, 2355, 2450 ALL SN 756484>)
A-T21977
Gear, 4th & 8th
3.3 Lbs.
Dim/Info:
20 / 27 Teeth
4.075" O.D.
1.875" I.D.
ALLIS
CHALMERS
DEUTZ
MASSEY
FERGUSON
WHITE/
OLIVER
For Models: 1520, 1530, 2020, 2030, 2040, 2240, 2440, 820, 830, (2155, 2355
ALL SN <756483)
A-L28665
Gear, 4th & 8th
4.12 Lbs.
Dim/Info:
27 / 20 Teeth
CNH
For Models: 5200, 5210, 5220, 5300, 5310, 5320, 5320N, 5400, 5403, 5410,
5415, 5420, 5420N, 5500, 5510, 5520, 5520N, 5605, 5615, 5705, 5715
For Models: 2130, 2630, 2640, 2140 SN <363674
A-T21980
A-R33927
Transmission Drive Shaft
15 Lbs.
CASE-IH
Shaft, Transmission Input
5.3 Lbs. FORD / NEW
Dim/Info:
22.620" long
16 / 16 Spline
For Models: 500, (500A, 500B, 500C ALL IND), 3020 W/ SYNCRO RANGE TRANS.
For Models: (1020, 1520, 1530, 2020, 2030, 2040 ALL W/ COLLAR SHIFT TRANSMISSION), 2155 SN <756483 W/ COLLAR SHIFT TRANSMISSION, 2240 W/ COLLAR
SHIFT TRANSMISSION, 2355 SN <756483 W/ COLLAR SHIFT TRANSMISSION, 2440
W/ COLLAR SHIFT TRANSMISSION, 2555 SN <756483 W/ COLLAR SHIFT TRANSMISSION, (820, 830 ALL W/ COLLAR SHIFT TRANSMISSION)
A-R32167
Replaces: R27030
A-L62773
Transmission Drive Shaft
SYNCHRO TRANSMISSION, HI-LO CREEPER
For Models: 3010
6.48 Lbs.
For Models: (1640, 2040, 2040S, 2140 ALL SN: 430000 >), 2150, 2155 SN: <
765146, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2855N, 2950, 2955 SN: <
765516, 3055, 3150, 3155 SN: < 738221, 3255, 3640
A-R136338
Transmission Shaft
Replaces: R130362, R133074
6 Lbs.
For Models: 5200 SN 520106> W/ Syncro Trans., 5200 SN 520107> W/ Collar Shift
Trans., 5210, 5220, 5300 SN 530189> W/ Collar Shift Trans., 5300 SN 530194> W/
Syncro Trans., 5310, 5320, 5400 SN 540205> W/ Syncro Trans., 5400 SN 540206>
W/ Collar Shift Trans., 5403, 5410, 5415, 5420, 5500 W/ Collar Shift Or Syncro Trans.,
5510, 5520, 5605, 5615, 5705, 5715
A-T21976
Gear, 2nd & 6th
BELARUS
7.08 Lbs.
Dim/Info:
21.310" long
19 / 19 Spline
For Models: 600, (4000, 4010, 4020, 4320 ALL SYNCRO RANGE TRANS.)
A-R59641
Pinion, Low Range Synchro Transmission
2 Lbs.
Dim/Info:
24 Teeth
14 Teeth
Collar, Reverse Range Shift
LANDINI
LEYLAND
0.7 Lbs.
LONG
Gear, 3rd & 7th
McCORMICK
OTHER
For Models: (4000, 4020 ALL W/ SYNCHRO RANGE TRANS)
For Models: 1020, 1030, 1120, 1130, 1140, 1350, 1520, 1530, 1550 SN
<756483, 1630, 1640, 1641F, 1750 SN <756483, 1830, 1840, 1850 SN
<756483, 2020, 2030, 2040, 2120, 2150, 2155 SN <756483, 2240, 2250 SN
<756483, 2255, 2350, 2355 SN <756483, 2440, 2450 SN <756483, 2550, 2555
SN <756483, 300B IND, 301A, 302, (302A, 310 ALL IND), 401, (401C, 410, 480C
ALL IND), 820, 830, 840, 920, 940, 300, 301, 380 IND, 400, 480 IND, 1040
4.66 Lbs.
A-R55559
Hook Bolt, Speed Change
Replaces: R32397
0.74 Lbs.
A-R26194
Hook Bolt, Speed Range
0.85 Lbs.
VALTRA
For Models: 4000 Syncro-Range, 4010, 4020 Syncro-Range, 600 Collar Shift
A-T30755
Power Shaft Clutch Gear
8.6 Lbs.
Dim/Info:
73 TEETH
6.500" I.D.
10.500" O.D.
fax: 1-800-511-0516
VERSATILE
YANMAR
ZETOR
For Models: (1020, 1520, 1530, 2020, 2030 ALL WITH INDEPENDENT 540 RPM
PTO)
SCHWARTZ
SPEECO
A&I PRODUCTS
RENAULT
SAME
For Models: 4000 Syncro-Range, 4010, 4020 Syncro-Range
Dim/Info:
31 / 20 Teeth
1.375" I.D.
4.750" O.D.
For Models: 1641F, 2020, 2030, 2040, 2120, 2440, 2630, 2640, 820, 920, 2240
SN 350000>
JOHN
DEERE
KUBOTA
For Models: (4000, 4020, 4230 ALL W/ SYNCHRO RANGE TRANS)
A-R33382
BOBCAT
JCB
3.9 Lbs.
Dim/Info:
36 / 20 Teeth
5.375" O.D.
A-AT30053
FIAT
5.92 Lbs.
Dim/Info:
23.130" long
16 / 16 Spline
A-R34201
HOLLAND
1-800-657-4343
117
A-R67340
Gear, Transmission Countershaft Driven
AGCO
ALLIS
CHALMERS
DEUTZ
1.89 Lbs.
A-R50655
Shift Collar, Transmission Countershaft
Dim/Info:
12 / 13 Teeth
16.000' I.D.
4.000" Long
For Models: 2640 SN <340999 W/ INDEPENDENT PTO LESS HI/LO SHIFT, 2630 W/
INDEPENDENT PTO LESS HI/LO SHIFT
Gear, Transmission Countershaft Low Range2.2 Lbs.
Dim/Info:
20 / 22 Teeth
3.425" O.D.
1.900" I.D.
WHITE/
OLIVER
For Models: 1020 SN 77422>, 1030 SN: 317105>, 1120 SN 77422>, 1130
SN 317105>, 1140, 1350, 1550, 1630 SN 317105>, 1640, 1641F, 1750, 1830,
1840, 1850, 2020 SN 77422>, 2030, 2040 SN 350000>, 2120 SN 77422>,
2130, 2140, 2150, 2155, 2240 SN 350000>, 2250, 2255, 2350, 2355, 2440 SN
<340999, 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 840, 940
A-R26066
Shift Collar
2 Lbs.
For Models: 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 820, 830, (2155,
2355, 2355N, 2555 ALL SN <756483)
A-R26178
CNH
CASE-IH
Shaft, Shift Quadrant
0.7 Lbs.
A-AT20093
For Models: 2510 Syncro-Range, 3010 SN <049999, 3020 SN <122999 SyncroRange, 4010, 4020 SN <200999 Syncro-Range, (440, 440A, 440B ALL Dubuque SN
<49999; Welland SN <19999 Syncro-Range), 5020 SN <030149, (500, 700A ALL
Collar Shift), 500A SN <123113 Collar Shift, 600 SN <200999 Collar Shift
FORD / NEW
HOLLAND A-R52882-L
Latch, Steering Valve Bracket
Replaces: R26188, R40148, R42128
0.15 Lbs.
BOBCAT
JCB
For Models: 2010 SN 42001>, (2510, 2520 ALL Syncro-Range), 3010 SN
<049999, (3020, 4000 ALL Syncro-Range), 4010, (4020, 4030 ALL Syncro-Range),
4040 Syncro-Range & Creeper, 4230 Syncro-Range, 4240 Syncro-Range & Creeper,
(4320, 4430, 4520, 4620, 4630 ALL Syncro-Range), 500C Collar Shift, 5010, 5020,
6030, (500A, 500B ALL Collar Shift), 700A
A-R33383
Shift Collar
Replaces: R26074
Lever, Gearshift
0.87 Lbs.
For Models: 1020, 1030, 1120, 1130, 1530, 1630, 1830, 2020, 2030, 2120,
2240, 2440, 2630, 2640, (300B, 301A, 302, 302A, 401B, 401C ALL S/N 252675707399), (820, 830 ALL S/N 092219->), 930, 300, 301 S/N 252675->, 400, 401
S/N 252675->
A-L29283
Shift Collar
0.94 Lbs.
Dim/Info:
20 Spline
For Models: 1052, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1830,
1840, 1850, 1950, 2020, 2030, 2120, 2130, 2140, 2150, 2155, 2250, 2255,
2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 840, 920, (2040,
2240 ALL SN 350000>)
A-L29284
KUBOTA
LEYLAND
0.6 Lbs.
1 Lbs.
JOHN
DEERE
LANDINI
Shift Lever
For Models: 1020, 1520, 2020, 2030, 2240, 2440, 2630, 2640, 300, 300B, 301,
301A, 302, 302A, 401, 401B, 401C, 820 SN <024012
A-R53817
FIAT
BELARUS
For Models: 4010, 4350, (4000, 4020, 4320 ALL Syncro-Range), (4040, 4230,
4240, 4430 ALL Syncro & Quad Range), 4440 Quad-Range, 600 Collar Shift
Carrier, Shift Collar
0.51 Lbs.
For Models: (2510, 2520, 3010, 3020, 340D, 4000, 4010, 4020 ALL Syncro
Range), 4030 S/N <-015963 Syncro Range, 4230 S/N <-037595 Syncro Range,
(440D, 448D, 440, 440A, 440B ALL Syncro Range)
A-R33480
Collar, Shift Reverse Range
0.84 Lbs.
LONG
For Models: 1020, 1030, 1120, 1130, 1630, 1640 SN: 430000 >, 1641F, 1830,
2020, 2030, 2040 SN: 350000 >, 2040S SN: 430000 >, 2120, 2130, 2140 SN:
430000 >, 2150, 2155 SN: < 765146, 2240 SN: 350000 >, 2255, 2350, 2355,
2355N, 2550, 2555, 2750, 2755, 820, 830, 920, 930
McCORMICK
OTHER
A-R60557
Shifter, Low/ Reverse Range
1.65 Lbs.
For Models: (2510, 2520, 3020 ALL W/ SYNCRO-RANGE)
RENAULT
A-L28666
Shift Collar
0.07 Lbs.
Dim/Info:
9 Teeth
12 Spline
SAME
For Models: (820, 920, 1020, 1120 ALL SN: 077422 >), 830, 930, 1030, 1130,
1630, 1640 SN: 430000 >, 1830, 2020 SN: 077422 >, 2030 SN: 246645 >,
(2040, 2040S ALL SN: 430000 >), 2120 SN: 077422 >, 2130, 2140 SN: 430000
>, 2150, 2255, 2350, 2440, 2550, 2630, 2640, 2750
VALTRA
VERSATILE
For Models: 2555, 2040 SN <349999
A-R26075
Shift Collar
1 Lbs.
A-R26397
Arm, Gear Shift
1.3 Lbs.
YANMAR
ZETOR
For Models: 3010
SCHWARTZ For Models: 4010
SPEECO
118
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY A-T30065
FERGUSON
0.72 Lbs.
Dim/Info:
20 Spline
A-RE71983
Cable, Clutch
0.8 Lbs.
A-T24728
Transmission Countershaft Gear
For Models: (5210, 5310 ALL Collar Shift Or SyncShuttle Transmission), (5320N,
5420N, 5520N ALL SyncReverser Transmission)
A-AR54617
Shift Control Cable
For Models: 4630 W/ POWERSHIFT TRANS.
AGCO
0.8 Lbs.
Dim/Info:
47 1/2" Total Length
A-AR54618
1.8 Lbs.
Dim/Info:
16 / 12 / 12 Spline
4.020" Long
Cable, Control Valve
0.82 Lbs.
For Models: 1020 SN <340999 LESS HI-LO SHIFT, 1030, 1120, 1130, 1140,
1350, (1520, 1530 ALL SN <340999 LESS HI-LO SHIFT), 1550, 1630, 1640, 1750,
1830, 1840, 1850, (2020, 2030, 2040 ALL SN <340999 LESS HI-LO SHIFT), 2120,
2150, 2155 LESS REVERSER, 2240 SN <340999 LESS HI-LO SHIFT, 2250, 2255,
2350, 2355 LESS REVERSER, 2440 SN <340999 LESS HI-LO SHIFT, 2450, 2550,
2555 LESS REVERSER, 820, 830, 840, 920, 940, 1040
A-T21981
Dim/Info:
53" Total Length
Transmission Countershaft Gear
1.32 Lbs.
Dim/Info:
20 / 21 Teeth
ALLIS
CHALMERS
DEUTZ
MASSEY
FERGUSON
WHITE/
OLIVER
For Models: (4630, 4640, 4840 ALL W/ POWERSHIFT TRANS.)
A-AR55702
Cable, Control Valve
1 Lbs.
Dim/Info:
52" Total Length
For Models: 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1830,
1840, 1850, 2120, 2130, 2140, 2250, 2450, 2630, 840, 920, 940, 300B IND,
(300, 301, 400, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350,
2440, 2550, 2640, 301A, 302, 302A, 401, 820, 830 ALL LESS REVERSER), (2155,
2355, 2555 ALL SN <756483 LESS REVERSER), 1030, 1040
A-L28671
Transmission Countershaft
A-AR78968
Cable, Transmission Control Lock
Replaces: AR55701
0.7 Lbs.
Dim/Info:
41" Total Length
FORD / NEW
HOLLAND
FIAT
For Models: 2040S, 2130, 2140, 2440, 2630, 2640, 2750
A-P48573
For Models: (4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840 ALL W/ POWERSHIFT TRANS.)
A-RE191324
Cable, Transmission Reverse Control Valve 0.8 Lbs.
Replaces: AR55700
Pinion
5.75 Lbs.
Dim/Info:
14 Teeth
21 Spline
7.500" Long
BELARUS
For Models: 484, 7440, 7445, 9900, 9910, 9920
A-L28661
BOBCAT
Transmission Pinion Gear
2.36 Lbs.
JCB
Dim/Info:
22 / 20 Teeth
Dim/Info:
45" Total Length
JOHN
DEERE
For Models: 2130, 2630, 2640, 2140 SN <-363674
For Models: (4040, 4230, 4240, 4430, 4440, 4640 ALL W/ POWERSHIFT TRANS.)
A-AR75603
Transmission Filter
1.08 Lbs.
A-R50825
KUBOTA
2.35 Lbs.
Housing, Pump, Oil Transmission
3.5 Lbs.
13.72 Lbs.
A-L29226
Differential Cross Shaft
0.94 Lbs.
For Models: 1530, 2030, 2040, 2155, 2240, 2355, 2355N, 2555, 2755, 2840,
2855, 2940, 2955, 3055, 3155, 3255
A-T30253
For Models: 1020, 1030, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630,
1640, 1641F, 1750, 1830, 1840, 1850, 2020, 2030 SN <187300, 2040, 2120,
2150, 2155 SN <756483, 2240, 2250 SN <756483, 2255, 2350, 2355 SN
<756483 W/ CONTINUOUS RUNNING PTO W/ REVERSER, 2450 SN <756483, 2550,
2555 SN <756483 W/ CONTINUOUS RUNNING PTO W/ REVERSER, 410 IND, 820,
830, 920, 940, 300, (310, 380 ALL IND), 400, 480 IND, 1040
Housing, Differential
16.5 Lbs.
LONG
RENAULT
SAME
VALTRA
VERSATILE
YANMAR
For Models: 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1640 S/N <-410063,
1641F, 1840 S/N <-410063, 2020, 2030, 2040, 2040 S/N <-410063, 2120,
2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2630, 300B S/N 195279->,
302A S/N 194773->, 401B, 401C, 410, 820, 830, 920, 930, 940, 310, 380, 400,
401, 480, 480A, 480B
fax: 1-800-511-0516
LEYLAND
OTHER
For Models: 4000, 4020, 600
Dim/Info:
37 Teeth
8 Spline
11.690" Long
A&I PRODUCTS
LANDINI
McCORMICK
For Models: 1020, 1120, 1520, 1530, 2020, 2030, 2040, 2120, 2150, 2240,
2350, 2450, 2510, 2520, 2550, 2630, 2640, 2940, 3010, 3020, 4000, 4010,
4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020,
7520, (820, 830 ALL German), 8430, 8630
Transmission Countershaft
Shaft, Transmission Oil Pump
For Models: 4040 Quad & Syncro Range, 4040S, 4050 Quad Range, 4055, (4230,
4240 ALL Quad & Syncro Range), 4240S, 4250 Quad Range, 4255, 4350, (4430,
4440 ALL Quad & Syncro Range), 4450 Quad Range, 4455
A-AR41949*
A-T24726
CASE-IH
14.46 Lbs.
Dim/Info:
36 Teeth
8 Spline
11.690" Long
For Models: (4040, 4230, 4240, 4430, 4440, 4640 ALL W/ POWERSHIFT TRANS.)
CNH
1-800-657-4343
ZETOR
SCHWARTZ
SPEECO
119
A-T149743*
Housing, Ring Gear
16.5 Lbs.
A-L31055
Boot, Gear Shift
0.01 Lbs.
AGCO
ALLIS
CHALMERS
DEUTZ
A-T29394
Differential Bevel Gear
WHITE/
OLIVER
CNH
CASE-IH
1.84 Lbs.
Dim/Info:
18 Teeth
A-R51500
For Models: 300, 301, 310, 380, 400, 401, 480, 1020, 1120, 1130, 1520, 1530,
1630, 1640, 1830, 1840, 2020, 2030, 2040, 2130, 2150, 2155, 2240, 2255,
2350, 2355, 2440, 2550, 2630, 2640, 302, 3300, 410, 820, 830, 840, 920, 1030,
1040, 210C, 2140, 300B, 301A, 302A, 310A, 310B, 310C, 315C, 401B, 401C,
401D, 410B, 410C, 415B, 480C, 482C, 510B, 510C, 515B, 930, 940, 480A, 480B
A-L29227
Gear, Differential Spider
0.82 Lbs.
Housing
9.38 Lbs.
For Models: 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 1640 S/N
<-410063, 1641F, 1830, 1840 S/N <-410063, 2020, 2030, 2040, 2040 S/N
<-410063, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 820,
830, 840, 920, 930, 940
A-AT21623
Dim/Info:
11 Teeth
FORD / NEW
HOLLAND
For Models: 1020, 1030, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1641F,
1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2140, 2150, 2240, 2255, 2350,
2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 2955, 300B IND, (301A, 302
ALL SN 252675->), 302A IND SN 252675->, 3030, 3040, 3050, 3120, 3130,
3140, 3350, 401B SN 252675->, 401C IND SN 252675 ->, 401D, 820, 830, 840,
920, 940, 300, 301, 400, 401, 1040
Differential Ring Gear & Pinion
34.2 Lbs.
FIAT
For Models: 1020, 2020, 2030, 2040, 2855, 840, 1030, 1040, 1120, 1130,
1530, 1630, 1640, 1830, 1840, 2120, 2130, 2140, 2150, 2155, 2240, 2255,
2350, 2355, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 3030, 3040,
3055, 3120, 3130, 3140, 3150, 3155, 3255, 3640, 820, 830, 920, 930, 940
BELARUS
A-L28376
Differential Bevel Gear
For Models: 1520, 1530, 2020, 2030, 2040 SN 350000>, 2240, 2440
A-L79729
Ring Gear, MFWD Planetary
For ZF APL2035 Front Axles
1.8 Lbs.
Dim/Info:
Z: 56/98
ZF# 4475305069
Dim/Info:
18 Teeth
BOBCAT
10.34 Lbs.
JCB
JOHN
DEERE
KUBOTA
LANDINI
For Models: 410D SN 796855>, 410E, 410G, 510D SN 796855>, 6110L, 6210L,
6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6403, 6410, 6410L, 6410S,
6500, 6500L, 6510L, 6510S, 6603
For Models: 1030, 1130, 1630, 1640, 1840, 2040, 2140, 2250, 2355, 2450,
2550, 2555, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3030,
3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650,
6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400,
6403, 6405, 6410, 6420, 6500, 6505, 6510, 6520, 6605, 6610, 6620
A-JD8856
Needle Bearing
A-PCA1139
25.3 Lbs.
Planetary Pinion Carrier Assembly W/ Pinion Gears
0.02 Lbs.
LEYLAND
LONG
McCORMICK
OTHER
RENAULT
SAME
For Models: 2510, 2520, 3020, 4000, 4020, 4230, 4240, 4430, 4440, 4520,
4620, 4630, 4640, 4840, 510, 540A, 644C, 646C, 9940, 9950, 440, 440A, 440B,
500, 500A, 500B, 540, 600, 644B, 760A
A-R161382
Knob, Shift Lever
0.11 Lbs.
A-T28908
Planetary Drive Shaft (LH)
7.1 Lbs.
Dim/Info:
12 Teeth
23 Spline
9.650" Long
For Models: 1020, 1530, 2020, 2030, 2440, (310A, 410 ALL IND SN <-371556),
820, 830, 300, 301, 310 IND, 400, 480 IND
VALTRA
VERSATILE
For Models: 1020, 1030, 1120, 1130, 1530, 1630, 2020, 2030, 2040, 2120,
2130, 2240, 2440, 2630, 2640, 2840, 2940, 3030, 3120, 3130, 401D, 4055,
(4030, 4050, 4230, 4250, 4430, 4450, 4630, 4650 ALL W/ QUAD RANGE), (4040,
ZETOR
4240, 4440, 4640, 4840 ALL W/ QUAD RANGE & POWER SHIFT), 4455, 4560,
4755, 4760, 610C, 7020 SN: 002700 >, 710B, 710C, 7520, 820, 830, 8430,
8440, 8450, 8570, 8630, 8640, 8650, 8770, 8850, 8870, 8970, 920, 955, (8560,
SCHWARTZ 8760, 8960 ALL W/ 12 SPEED SYNCHRO & 24 SPEED PWR SYNCHRO)
YANMAR
SPEECO
120
For Models: 5403, 5415, 5605, 5615, 5705, 5715, (5200, 5300, 5400, 5500
ALL W/ Collarshift, Syncronized, Hyd Reverser Trans), (5210, 5220, 5310, 5320, 5410,
5420, 5510, 5520 ALL W/ Collarshift, Syncroshuttle, Powereverser Trans), (5225, 5325,
5425, 5425N, 5525, 5625 ALL W/ Syncroshuttle Or Powereverser Trans), (5310N,
5320N, 5400N, 5420N, 5500N, 5510N, 5520N ALL Syncroreverser Trans), (5725,
5725N ALL Syncroshuttle Trans), (5325N, 5525N ALL Powereverser Trans)
A-T28907
Planetary Drive Shaft (RH)
4.5 Lbs.
Dim/Info:
12 Teeth
23 Spline
6.940" Long
For Models: 1020, 1530, 2020, 2030, 2440, (310A, 410 ALL SN <-371556), 820,
830, 930, 940, 300, 301, 310, 400, 480
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY
FERGUSON
For Models: 210C, 300B, 300D SN 796853->, 302A, 310, 310A, 310B, 310C,
310D SN 796853->, 315C, 315D SN 796853->, 380, 400, 401, 401B, 401C,
401D, 410, 410B, 410C, 410D SN 796855->, 415B, 480, 480A, 480B, 482C SN
797089->, 510B, 510C, 510D SN 796855->, 515B
A-T38049
Pinion Shaft, Planetary
1.3 Lbs.
Planetary Drive Shaft
13.5 Lbs.
Dim/Info:
15 Teeth
28 Spline
12.500" Long
For Models: 1640, 2040, 2040S, 2140 SN 370493->, 2250, 2355, 2355N, 2450,
2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N
A-T21547
Gear, Planetary Pinion
2.26 Lbs.
Dim/Info:
18 Teeth
1.759" Wide
Gear, Planetary Pinion
AGCO
ALLIS
CHALMERS
For Models: 4000, 4020, 4240, 4240S, 4320, 4455, 4050 SN 2725-> POWR
SHIFT, SN 6644-> QUAD, 4230 SN 26189-> W/ 51MM WIDE GEAR, 4250 SN 1000>, 4430 SN 40771->, (4055, 4255 ALL W/ 86MM AXLE)
A-R116821
Pinion Gear, Used w/ A-R62685 Shaft
7.74 Lbs.
DEUTZ
MASSEY
FERGUSON
WHITE/
OLIVER
Dim/Info:
21 Teeth
2.010" Wide
For Models: (4020, 4230, 4320, 4430 ALL W/ 2" 51MM WIDE GEAR), 4050 PWRSHFT SN 2725->, QUAD SN 6644->, 86MM, 4455 SN 7420>, 624G, 644G, 9610
A-R43016
For Models: 1020, 1120, 1130, 1140, 1350 SN 627639>, 1520, 1530, 1550,
1630, 1640, 1750, 1830, 1840, 1950, 1950N, 2020, 2030, 2040, 210C, 2130,
2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440 SN <340999, 2450, 2550,
2555, 300B, 300D, 301A, 302, 302A, 310A, 310B, 310C, 310D, 315C, 401B, 401C,
401D, 410, 480C, 482C, 820, 920, 300, 301, 310, 380, 400, 401, 480
A-T29444
17.49 Lbs.
Dim/Info:
15 Teeth
18 Spline
9.780" Long
For Models: 1020 SN 98543->, 1030, 1040, 1052, 1120 SN 98543->, 1130,
1140, 1350 SN 627639->, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1950,
1950N, 2020 SN 89328->, 2030, 2040, 210C, 2130, 2150, 2155, 2240, 2255,
2350, 2440 SN <340999, 2550, 300B, 920 SN 98543->, 940
A-L36202
A-R62685
Pinion Shaft
Replaces: R59928
Pinion Shaft, 13 Tooth
20.74 Lbs.
Dim/Info:
13 Teeth
22 Spline
10.730" Long
CASE-IH
For Models: 4520, 4620, 4630 SN <-12839, (7020, 7520 ALL REAR AXLE ONLY)
A-R43014
9.71 Lbs.
Dim/Info:
20 Teeth
2.000" Wide
6.42 Lbs.
Dim/Info:
26 Teeth
2.243" Wide
CNH
FORD / NEW
HOLLAND
FIAT
For Models: 4520, 4620, 4630 SN <-12839, 7020, 7520 REAR AXLE ONLY
A-R67198
Pinion Shaft
Replaces: R56731
For Models: 1640, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355,
2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N
A-L31503
Gear, Differential Pinion
16.49 Lbs.
Dim/Info:
15 Teeth
18 Spline
9.380" Long
5.68 Lbs.
Dim/Info:
40 / 20 Teeth
A-R45779
Pinion Shaft
Replaces: R33431
A-R56732
6.48 Lbs.
JOHN
DEERE
KUBOTA
LANDINI
LEYLAND
LONG
For Models: 4040S, 4050 SN <-2724 W/ POWR SHIFT OR SN <-6643 W/ QUAD,
4230 SN 15453-26188, 4430 SN 21270-40770 W/ 86MM GEAR, (4040, 4240 ALL McCORMICK
86MM GEAR)
A-R61711
Pinion Shaft, 14 Tooth
Replaces: R57614
For Models: 4020, (4000, 4230, 4320 ALL SN <-15452), 4430 SN <-21269,
7520 FRONT AXLE ONLY, (570B, 570 ALL IND), 600, 644
Pinion Gear, Used w/ R45779 Shaft
JCB
Dim/Info:
21 Teeth
1.515" Wide
15.22 Lbs.
Dim/Info:
15 Teeth
18 Spline
9.390" Long
A-R33004
BOBCAT
For Models: 4040S, 4050 SN <-2724 W/ POWR SHIFT OR SN <-6643 W/ QUAD,
4230 SN 15453-26188, 4430 SN 21270-40770 W/ 86MM GEAR, (4040, 4240 ALL
86MM GEAR)
For Models: 1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F,
1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2150, 2155 SN <756483,
2240, 2250, 2255, 2350, 2355 SN <756483, 2450, 2550, 2555 SN <756483,
820, 840, 920, 940, 1040
BELARUS
Dim/Info:
14 Teeth
22 Spline
10.730" Long
6.62 Lbs.
Dim/Info:
21 Teeth
1.510" Wide
22.57 Lbs.
RENAULT
SAME
For Models: 4520, 4620, 4630 SN 12840->, (7020, 7520, 8430 ALL REAR AXLE
ONLY), 8630 REAR AXLE SN <-7842
A-R57615
9.15 Lbs.
Dim/Info:
22 Teeth
2.000" Wide
For Models: 4020, 4320, 4000 SN 201000->, 4230 SN <-15452, 4430 SN <21269, (670, 672 ALL IND (A&B)), (570B, 690B, 690C, 693B, 693C, 570, 646 ALL IND),
7520 FRONT AXLE ONLY, (7720, 8820 ALL W/ PLANETARY FINAL DRIVE), 600, 644
OTHER
VALTRA
VERSATILE
YANMAR
ZETOR
For Models: 4520, 4620, 4630 SN 12840->, (7020, 7520, 8430 ALL REAR AXLE
ONLY), 8630 REAR AXLE SN <-7842
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
SCHWARTZ
SPEECO
121
A-R112834
Pinion Shaft
22.77 Lbs.
Dim/Info:
14 Teeth
22 Spline
11.090" Long
AGCO
ALLIS
CHALMERS For Models: 4555, 4560, 4640, 4650, 4755, 4760, (8440, 8450 ALL REAR AXLE
DEUTZ
A-R92335
Replaces: R64324
10.9 Lbs.
Dim/Info:
22 Teeth
2.560" Wide
WHITE/
OLIVER
A-AL23836
For Models: 4555, 4560, 4640, 4650, 4755, 4760, 744E, 744H, (8440, 8450 ALL
REAR AXLE ONLY), 8630 REAR AXLE SN 7843->
A-R59698
Pinion Shaft
13.41 Lbs.
Dim/Info:
14 Teeth
18 Spline
10.580" Long
CASE-IH
For Models: 4255, 4350, 4440, (8440, 8450 ALL FRONT AXLE), 8630 FRONT AXLE
FORD / NEW SN 7843->
CNH
HOLLAND
A-R59696
BELARUS
BOBCAT
JCB
JOHN
DEERE
KUBOTA
12.54 Lbs.
Dim/Info:
14 Teeth
18 Spline
10.090" Long
For Models: 8430 FRONT AXLE ONLY, 8630 FRONT AXLE SN <-7842
A-R65635
Replaces: R57402
10.96 Lbs.
Dim/Info:
31 Teeth
2.250" Wide
LANDINI
0.09 Lbs.
For Models: 1020, 1120, 2020, 2040, 2120, 2240 S/N 350000->, 2440 S/N
341000->, 2840, 2940, 3120, 4425, 4435, 820, 830, 920
A-AR31946
Brake Valve Overhaul Kit
Replaces: AR30687
0.05 Lbs.
For Models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050,
4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555,
4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 500C,
5010, 5020, 510, 6030, 670A, 672A, 7020, 7520, 770A, 772A, 8430, 8440,
8450, 8630, 8640, 8650, 8850, 9940, 9950, 440, 440A, 440B, 500, 500A, 500B,
540, 540A, 570, 570A, 600, 670, 700A, 760, 760A
For Models: 4255, 4350, 4440 SN <10329 W/ 86MM OR W/ 92 MM, (8440,
8450 ALL FRONT AXLE), 8630 FRONT AXLE SN 7843>
A-R67199
Pinion Shaft
Replaces: R57401
Check Valve
13.38 Lbs.
Dim/Info:
31 Teeth
2.755" Wide
FIAT
For Models: (1020, 1520, 2020, 2030, 2150, 2155, 2240, 2255, 2350, 2355,
2355N, 2440 ALL Reverser Brake Piston), 2510, 2520, (2550, 2555, 2630, 2640,
300B, 301A, 302 ALL Reverser Brake Piston), 3020 SN <-122999, (302A, 310A,
310B, 401B, 401C, 401D ALL Reverser Brake Piston), 4020 SN <-132979, (410,
480C, 300, 301, 310, 380, 400, 401, 480, 480A, 480B ALL Reverser Brake Piston),
500, 500A SN <-123113, (570, 570A ALL <-1967 Date), 600
A-R52169
Guide, Brake Operating Rod
Replaces: R31457
0.25 Lbs.
For Models: 2510, 2520, 3020, 4000, 4010 SN 20200>, 4020, 4030, 4040,
4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440,
4450, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850,
4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570,
8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970
A-AM1967T
Brake Disc
0.48 Lbs.
LEYLAND
LONG
For Models: 8430 FRONT AXLE ONLY, 8630 FRONT AXLE SN <7842
McCORMICK A-R112836
Pinion Shaft
OTHER
RENAULT
SAME
VALTRA
18.2 Lbs.
For Models: 1010 Single Row Crop, Utility & Orchard, 320, 330, 40 Hi-Crop, Std.,
Utility, Special & Two Row Utility, (420, 430 ALL Hi-Crop, Std., Utility & Special)
Dim/Info:
14 Teeth
22 Spline
12.000" Long
For Models: 4840, 4850, 4955, 4960, (8640, 8650 ALL FRONT / REAR AXLES)
A-R120848
Pinion Gear
Used w/ A-R112836 Shaft
Replaces: R61423
1.1 Lbs.
17.74 Lbs.
Dim/Info:
31 Teeth
3.360" Wide
VERSATILE
A-AM1828T
Brake Disc
Replaces: AM930T, AT13066
For Models: 40 Tri-Cycle, (420, 430 ALL Special, Utility, Tri-Cycle & Row Crop Utility),
1010 Row Crop Utility, Special Row Crop Utility & Row Crop
YANMAR
ZETOR
For Models: (4840, 4850, 4955, 4960, 8560, 8570, 8640, 8650, 8760, 8770,
8870 ALL FRONT / REAR)
SCHWARTZ
SPEECO
122
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY
FERGUSON
ONLY), 8630 REAR AXLE SN 7843->
A-R33059 Seal, Powershift Clutch or Reverser Brake Piston 0.18 Lbs.
A-AT20703
Seal, Rear Axle Shaft
0.24 Lbs.
Dim/Info:
O.D.: 4.525"
Shaft Dia: 3.000"
Width: .375"
Guide
0.9 Lbs.
AGCO
ALLIS
CHALMERS
For Models: 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 SN: 430000 >,
1641F, 1830, 2020, 2030, (2040, 2040S ALL SN: 430000 >), 210C, 2120, 2130,
2140 SN: 430000 >, 2150, 2155 SN: < 765146, 2240 SN: 350000 >, 2255,
2350, 2440, 2550, 2630, 2640, 2750, 300B, 300D, 301A, 302, 302A, 310A, 310B,
310C, 310D, 315C, 315D, 401B, 401B SN: < 704001, 401C, 401D, 410, 5200,
5210, 5220, 5300, 5310, 5320, 5400, 5403, 5410, 5415, 5420, 5500, 5510,
5520, 5605, 5615, 5705, 5715, 6620 W/ 4-WHEEL DR, CAM LOBE MOTOR, 800
CM3/
A-L35542
A-RE235937
Brake Lining w/ Rivets
AA4253R includes (4) linings & 32 rivets.
For Models: A SN 410000>, (AO, AR ALL SN 250000>), G, GH, GN, GW, 60, (620,
630 ALL Orchard), (620, 630, 70, 720, 730 ALL HI-CROP)
A-AB3849R
Brake Lining
Replaces: AB3848R, B223R, B2723R
0.05 Lbs.
DEUTZ
MASSEY
FERGUSON
WHITE/
OLIVER
Dim/Info:
4 Linings
32 Rivets
0.26 Lbs.
For Models: 50, B
A-AF2866R
For Models: 1020, 1030, 1120, 1130, 1630, 1640 SN: 430000 >, 1641F, 1830,
2020, 2030, 2040 SN: 350000 >, 2120, 2130, 2140 SN: 430000 >, 2150, 2155
SN: < 765146, 2240 SN: 350000 >, 2350, 2550, 2750, 5103, 5200, 5203, 5210,
5220, 5300, 5303, 5310, 5320, 5400, 5415, 5420, 5500, 5510, 5520, 5605,
5615, 5615HC, 5705, 5715, 5715HC, 820, 830, 920, 930
A-R50703
Washer, Brake Disc Assembly
Replaces: T22102
0.02 Lbs.
Dim/Info:
O.D.: 10.627"
I.D.: 10.359"
Thickness: .134"
For Models: 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 SN: 430000 >,
1641F, 1830, 2020, 2030 USED ON TRACTORS W/ "L" AS LAST LETTER OF CHASIS
SN, 2040S SN: 430000 >, 2120, 2130, 2140 SN: < 438364, 2240, 410 SN: <
192000, 820, 830, 920, 930, 300, 301, 310 SN: < 192003, 400, 401
A-R50704
Sealing Washer, Brake Disk Assembly
0.02 Lbs.
Dim/Info:
O.D.: 11.252"
I.D.: 10.984"
Thickness: .134"
A-R31271
Spring, Brake Operating Rod
FORD / NEW
HOLLAND
0.05 Lbs.
For Models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050,
4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555,
4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010,
5020, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650,
8760, 8770, 8850, 8870, 8960, 8970
A-AR28487
Pads for Disc/Rotor Type Brakes
sold in lots of 3, priced per each pad.
0.1 Lbs.
For Models: 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4050, 4230,
4240, 4320, 4440
A-R111122
Brake Pads
Pads have steel center plate. Sold individually.
0.28 Lbs.
BOBCAT
JCB
JOHN
DEERE
KUBOTA
LEYLAND
LONG
RENAULT
For Models: 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4050, 4230,
4240, 4320, 4440
0.04 Lbs.
fax: 1-800-511-0516
BELARUS
OTHER
A-AR28488
Pads for Disc/Rotor Type Brakes
sold in lots of 3, priced per each pad.
SAME
0.12 Lbs.
Dim/Info:
3.000" x 7.000" pad
VALTRA
VERSATILE
YANMAR
For Models: 4010, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010,
5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850
ZETOR
SCHWARTZ
SPEECO
A&I PRODUCTS
FIAT
McCORMICK
Dim/Info:
2.4375" X 6.5"
Dim/Info:
O.D.: 10.386"
I.D.: 10.118"
Thickness: .134"
For Models: 2840, 2940, 2950 SN: < 481283, 3030, 3120, 3130, 7600, 7610
SN: < 089999, 7700, 7710 SN: 090000 >, 7800, 7810 SN: 090000 >, 8100,
8200, 8300, 8400
CASE-IH
For Models: (720, 730, 80, 820, 830 ALL EXCEPT HI-CROP)
0.05 Lbs.
For Models: 2030 SN: 187301 >, 2440, 2630, 2640, 2840, 2940, 2950 SN: <
481283, 3030, 310A, 310B, 3120, 3130, 315CH SN: < 747037 & 761934 >
CNH
LANDINI
Dim/Info:
O.D.: 11.752"
I.D.: 11.484"
Thickness: .14"
A-T30349
1.34 Lbs.
Dim/Info:
4 Linings
40 Rivets
Dim/Info:
2.500" X 6.500" pad
For Models: 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 SN: < 438364,
1641F, 1830, 2020, 2030 SN: 187301 >, (2040, 2040S ALL SN: < 438364), 2120,
2130, 2140 SN: < 438364, 2240, 2440, 2630, 2640, 302, 302A, 310A, 315CH,
401B, 401C, 401D, 410 SN: < 192000, 410B, 410D SN: < 796854, 415B, 510D
SN: < 796854, 515B, 820, 830, 920, 930, 300, 301, 310, 400, 401
A-T135749
Brake Lining
1-800-657-4343
123
A-R110464
Brake Pads
Pads have steel center plate. Sold individually.
Replaces: R90086, AR28488
0.38 Lbs.
A-AR66749
Brake Disc
Used w/ Riveted Brake Linings
Replaces: AR72373
38.57 Lbs.
Dim/Info:
3" X 7"
AGCO
ALLIS
CHALMERS
DEUTZ
For Models: 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320 W/ 51MM
For Models: 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450
A-RE154280
Brake Disc
Replaces: RE46460
19 Lbs.
Dim/Info:
16.75" O.D.
14 Spline
Sold in lots of 18, priced per rivet
Replaces: R708R
Dim/Info:
.182" X 1.171" Long
6 used per pad
For Models: 8100, 8200, 8300, 8400, (9100, 9200, 9300, 9400 ALL SN
<053317)
CNH
For Models: 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4040S, 4050, 4230,
4240, 4240S, 4250, 4320, 4350, 440, 440A, 440B, 4430, 4440, 444C, 444CH,
CASE-IH 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 500, 500A, 500B, 500C, 510,
540, 540A, 540B, 544, 544A, 544C, 570, 570A, 600, 640, 644A, 646, 646B, 646C,
FORD / NEW 7020, 740, 740A, 743, 743A, 7520, 762, 762A, 8430, 8440, 8450, 8530, 8640,
HOLLAND 8650, 8850
FIAT
A-D1761
Rivets
Replaces: D1761R
0.01 Lbs.
JCB
JOHN
DEERE
KUBOTA
For Models: 3010
A-R26301
Rivets
A-R38615
Brake Disc
Use w/ A-R38232 Pinion Shaft
0.18 Lbs.
Dim/Info:
.182" X 1.343" Long
For Models: 3010, 4000, 4010, 4020, 4230, 4430
0.01 Lbs.
RENAULT
VALTRA
VERSATILE
Brake Center Plate
For Models: 4010
8 Lbs.
Dim/Info:
13 1/8" Dia.
15 Teeth
2.850" Minor I.D.
3.575" Major I.D.
For Models: (2510, 2520 ALL Row Crop), 540B Cable Skidder
8.19 Lbs.
For Models: (2510, 2520 ALL HI-CROP), 3020, 4030, (500C, 510 ALL IND), 9940,
9950, 440 (A&B), 500, (540, 540A ALL IND), 544, 544A
6.06 Lbs.
A-R58758
Brake Center Plate
Use w/ Sunshaft A-R59698
10 Lbs.
Dim/Info:
15.000" Dia.
14 Teeth
Dim/Info:
11 internal splines
12.000" O.D.
YANMAR
10.24 Lbs.
Dim/Info:
15.000" Dia
18 Teeth
Dim/Info:
13.250" Dia.
16 Teeth
For Models: 3010, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320,
4430, 4440, 4450, 5020, 570, 570A, 6030, 644A, 646, 646B, 700A, 740, 740A,
743, 743A, 760, 760A, 860, 860A
A-RE43390
Brake Disc
Replaces: AR65718
A-R26767
A-R33816
Brake Center Plate
Use w/ Sunshaft R49427
Dim/Info:
.182" X .671" LONG
6 used per pad
OTHER
8.25 Lbs.
Dim/Info:
13.250" Dia.
18 Teeth
LEYLAND
SAME
Brake Center Plate
For Models: 2510, 2520, 3010, 3020, 340D, 4000, 4010, 4020, 4030, 4040,
4040S, 4050, 4230, 4240, 4240S, 4250, 4320, 4350, 440, 440A, 440B, 440C,
440D, 4430, 4440, 444C, 444CH, 4450, 448D, 4520, 4620, 4630, 4640, 4650,
4840, 4850, 500, 500A, 500B, 500C, 5010, 5020, 510, 540, 540A, 540B, 544,
544A, 544C, 570, 570A, 570B, 600, 6030, 640, 643, 644A, 644B, 644C, 646,
646B, 646C, 700, 7020, 740, 740A, 743, 743A, 7520, 760, 760A, 762, 762A, 770,
770A, 772A, 8430, 8440, 8450, 860, 860A, 8630, 8640, 8650, 8850, 9940
A-D2593
Rivets
McCORMICK
Replaces: D2593R
20.34 Lbs.
For Models: (1640, 2040, 2040S, 2140, 2550 ALL W/ HEAVY DUTY FINAL DRIVE),
2130 SN 307453>, 2750
A-R26971
LANDINI
LONG
Brake Actuating Disc
Dim/Info:
.182" X .481" Long
6 used per pad
BELARUS
BOBCAT
A-L33910
ZETOR
For Models: 2440 SN 341000->, 2630, 2640
SCHWARTZ
SPEECO
124
For Models: 4040, 4050 HIGH CROP SN <006509, 4240, 4250 HIGH CROP, 4350,
4440
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY Final Drive, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010,
FERGUSON 5020, 570, 570A, 600, 6030, 644A, 644B, 646, 646B, 700A, 7020, 740, 740A,
WHITE/ 743, 743A, 7520, 762, 762A, 8430, 8440, 8450, 8630, 8640, 8650, 8850
Rivets
0.01 Lbs.
OLIVER A-R708
A-R62686
Brake Center Plate
Use w/ Sunshaft R59928, A-R67198, R56731 or A-R62685
10 Lbs.
A-RE48092
Disc, Inner Spline Transmission
Used w/ Powrquad & Powrreverser Transmissions.
Dim/Info:
15.000" Dia.
15 Teeth
Dim/Info:
11.618" Dia.
95 Teeth
For Models: 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430
A-R78430
Brake Center Plate
Use w/ Sunshaft A-R45779 or R33431
Replaces: R45781, R48476, R45780, R33819
10.3 Lbs.
Dim/Info:
15.000" Dia.
15 Teeth
A-R48864
Brake Center Plate
Use w/ Sunshaft A-R43016
11 Lbs.
Dim/Info:
17.000" Dia.
13 Teeth
Transmission Clutch Plate
ALLIS
CHALMERS
2.21 Lbs.
DEUTZ
MASSEY
FERGUSON
WHITE/
OLIVER
Dim/Info:
9.70" I.D.
11.625" O.D.
.20" Thick
For Models: (5620, 5720, 5820 ALL W/ Powrquad Transmission), (6010, 6020,
6100, 6110 ALL W/ Powrquad Or Powreverser Transmission), 6110L W/ Powreverser
Transmission, 6110L W/ Powrquad Transmission, (6120, 6120L ALL W/ Powrquad Or
Powreverser Transmission), 6130 W/ Powreverser Transmission, 6130 W/ Powrquad
Transmission, 6200 W/ Powrquad Or Powreverser Transmission, 6200L W/ Powrquad
Transmission, 6205 W/ Powreverser Transmission, 6210 W/ Powrquad Or Powreverser
Transmission, 6210L W/ Powreverser Transmissio
A-AT16431
Seal
Replaces: RE13181, AT167936
For Models: 4520, 4620, 4630, 7020, 7520
AGCO
For Models: (6010, 6020, 6100, 6110, 6110L, 6120, 6120L, 6200, 6210, 6210L,
6215, 6220, 6220L, 6300, 6310, 6310L, 6320, 6320L, 6400, 6410, 6410L, 6420,
6420L, 6510, 6510L, 6520, 6520L, 6610, SE6010, SE6020, SE6110, SE6120,
SE6210, SE6220, SE6310, SE6320, SE6410, SE6420, SE6510, SE6610 ALL
Powrquad Or Powreverser Transmission)
A-R95378
For Models: 4000, 4020, 4230, 4320, 4430, 646C, 570, 570A, 644, 644A, 644B,
646, 646B
A-R61140
Brake Center Plate
Use w/ Sunshaft R61421 or R74072 or A-R112836
2 Lbs.
0.2 Lbs.
CNH
CASE-IH
FORD / NEW
HOLLAND
FIAT
13.68 Lbs.
Dim/Info:
17.000" Dia.
14 Teeth
A-R61712
Brake Center Plate
Use w/ Sunshaft R63911 or R57614 or A-R61711
Replaces: R91826, R97801, R113741
11 Lbs.
Dim/Info:
17.000" Dia.
14 Teeth
2 Lbs.
Dim/Info:
11.618" Dia.
95 Teeth
A-AL38234
Brake Disc
Replaces: AL29645
6.86 Lbs.
KUBOTA
LEYLAND
LONG
McCORMICK
OTHER
A-AL38235
Brake Disc
Replaces: AL30096, AL38236
RENAULT
SAME
9.02 Lbs.
VALTRA
Dim/Info:
15 internal splines
12.000" O.D.
VERSATILE
YANMAR
For Models: (1640, 2040 ALL w/ hvy duty final drive, SN 370493->), 2040S SN
370493->, 2130 w/ hvy duty final drive, 2140 SN 370493->, (2355N, 2555, 2755
ALL SN <-668664), 2840 SN 305025->, 2855N SN <-668664, 2940, 2950,
(2955, 3155 ALL SN <-669173)
fax: 1-800-511-0516
JOHN
DEERE
LANDINI
For Models: (COMPACT TRACTOR: 950)
Dim/Info:
11.618" Dia.
95 Teeth
A&I PRODUCTS
BOBCAT
JCB
For Models: 1030 SN: 300750 >, (1130, 1630 ALL SN 300750->), 1830 SN
301446->, 2030 SN 301746->, 2040 SN 305840->, 2040 SN 350000->, 2155
SN <-672619, 2240 SN 305314->, 2240 SN 350000->, 2355 SN <-672619,
(2355, 2555 ALL w/ reverser, SN <-672619)
2 Lbs.
For Models: (6130, 6205, 6225, 6230, 6325, 6330, 6405, 6425, 6430, 6505,
6515, 6525, 6530, 6605, 6620, 6630, 6715, 7130, 7230, SE6100, SE6200,
SE6300, SE6400 ALL Powreverser Trans)
BELARUS
5 Lbs.
Dim/Info:
12 internal splines
12.000" O.D.
For Models: (5620, 5720, 5820, 6130, 6200L, 6230, 6300L, 6310S, 6330,
6400L, 6410S, 6420, 6430 PREMIUM, 6500, 6500L, 6506, 6510S, 6530, 6600,
6615, 6620, 6630, 6715, 6800, 6810, 6820, 6830, 6900, 6910, 6920, 6930,
7130, 7200, 7210, 7220, 7230, 7320, 7330, 7400, 7405, 7410, 7420, 7425,
7430 PREMIUM, 7500, 7505, 7510, 7515, 7520, 7525, 7530 PREMIUM, 7600,
7610, 7630, 7700, 7710, 7715, 7720, 7730, 7800, 7810, 7815, 7820, 7830,
7930, SE6520, SE6620, SE6920 ALL Powrquad Trans)
A-RE48092
A-M805899
Shoe, Brake
Used w/ Brake Drum CH11249
Replaces: CH11247
Dim/Info:
Priced per 1 pc. / sold in sets
of 2 pcs.
For Models: 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 7020,
744E, 7520, 8430, 8440, 8450, 8630
A-RE48092
For Models: 1020, 1120, 1130, 1830, 2010, 2020, 2030, 2120, 2440, 2510,
2520, 2630, 2640, 2840, 2940, 3020 S/N 123000>, 3030, 3120, 3130, 4030,
4040, 4230, 4240, 4320, 4430, 4440, 500C, 830, 930, 500A
1-800-657-4343
ZETOR
SCHWARTZ
SPEECO
125
A-AT63106
Brake Plate
Replaces: AT26290, AT22034
6.12 Lbs.
Brake Disc
4.1 Lbs.
Dim/Info:
12.250" O.D.
2.125" I.D.
14 Teeth
.232" (5.9 MM) Thick
Dim/Info:
12 internal
12.000" O.D.
AGCO
ALLIS
CHALMERS
DEUTZ
A-AL112982
For Models: 1020, 1520, 1530, 2020, 2030, 2040 SN <-305839, 210C SN
747742->, 2240 SN <-305313, 2440 SN <-340999, 300B, 820, 830
Brake Disc
3.7 Lbs.
Dim/Info:
15 internal splines
12.000" O.D.
WHITE/
OLIVER
A-RE186965
Disc, Brake
Replaces: RE65197
For Models: (2355N, 2555, 2755, 2855N ALL SN 668665->), 2955 SN 669174->,
3055, 3155 SN 669174->, 3255
A-AL65872
Brake Disc
3.88 Lbs.
CASE-IH
Dim/Info:
15.268" O.D.
15 Teeth
For Models: 7330 PREMIUM, 7430 PREMIUM, 7530 PREMIUM, 7600, 7610 SN
007411>, 7700, 7710, 7715, 7720, 7800, 7810, 7815, 7820, 7920
A-T52029
Brake Plate Assembly
Replaces: R55774
Dim/Info:
12 internal splines
12.000" O.D.
CNH
7.98 Lbs.
Dim/Info:
12.111" O.D.
8.663" I.D.
FORD / NEW
HOLLAND For Models: (2155, 2355, 2555 ALL SN 672620->)
FIAT
A-AZ40478
Brake Disc
Replaces: AL28236
9.14 Lbs.
BOBCAT
JCB
JOHN
DEERE
KUBOTA
LANDINI
A-AT12312
Brake Disc
OTHER
Brake Actuating Plate
8.34 Lbs.
For Models: 2355N SN 713945->, 2555 w/ HD final drive, SN 713945->, (2755,
2855N ALL SN 713945->), 2940, 2955 SN 713797->, 3055, 3155 SN 715796->,
3255
0.67 Lbs.
A-AL162808
Brake Disc
Replaces: AL76887
A-L31016
Replaces: T38063, T46728
13.74 Lbs.
Dim/Info:
12.044" O.D.
8.663" I.D.
3.92 Lbs.
Brake Disc
For Models: 1830 S/N 301446>, 2040, 2240
7.2 Lbs.
A-L33909
ZETOR
For Models: 7200, 7210 Early Model, 7400, (7405, 7410 ALL Early Model), 7420,
7500 Early Model, 7505, 7510 Early Model, 7520, (6800, 6810, 6820, 6900, 6910,
SCHWARTZ 6910S, 6920, 6920S ALL European Model)
SPEECO
22.94 Lbs.
Dim/Info:
12.111" O.D.
8.663" I.D.
Dim/Info:
13.125" O.D.
2.875" I.D.
15 Teeth
YANMAR
12.24 Lbs.
Dim/Info:
12.044" O.D.
8.663" I.D.
For Models: 5200, 5210, 5220, 5300, 5310, 5310 India, 5310N, 5320, 5320N,
5400, 5400N, 5403, 5410, 5415, 5420, 5420N, 5500, 5500N, 5510, 5510N,
5520, 5520N, 5605, 5615, 5705, 5715
VERSATILE A-RE186966
For Models: 820, 830, 1020, 1520, 1530, 2020, 2030 SN <-187300, 2040 SN
<-305839, 2240 SN <-305313
A-L33483
Dim/Info:
12.000" Dia.
14 Teeth
SAME
126
A-L55004
For Models: 2010 RC / RC UTIL
RENAULT
VALTRA
For Models: 1830 S/N 301446>, 2040 S/N 305840>, 2240 S/N 305314>,
2355, 2355N S/N <713944, 2555, (2755, 2855N ALL S/N <713944), 2955 S/N
<713796, 3155 S/N <715795
Dim/Info:
12.170" O.D.
8.670" I.D.
Dim/Info:
21 internal splines
5.640" O.D.
LONG
McCORMICK
4.04 Lbs.
Dim/Info:
14 internal splines
12.250" O.D.
.192" (4.9MM) Thick
12.250" outside
Spline Count14
For Models: 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500L
LEYLAND
3.86 Lbs.
Dim/Info:
12.170" O.D.
8.355" I.D.
For Models: (1030, 1130, 1630 ALL hvy duty application), (1030, 1130, 1630 ALL
SN <-300749), 1830 SN <-301445, 2030 SN <-301745, (1640, 2040 ALL w/ hvy
duty final drive, SN <-370492), 2130, 2140 SN <-370492
A-AL111498
Brake Disc
Replaces: AL75434
For Models: 2030 SN 187301->, 2440, 2630, 2640, 300B
A-L33497
Replaces: L56247
Dim/Info:
12 internal splines
12.000" O.D.
BELARUS
14.38 Lbs.
For Models: 2840 SN 305025>, 2940, 2950 SN <481283, (3030, 3130 ALL SN
301275>)
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY
FERGUSON A-AL65871
For Models: 6010, 6110, 6110L, 6120, 6205, 6210, 6210L, 6220, 6310, 6310L,
6310S, 6320, 6410, 6410L, 6410S, 6420, 6420S, 6500, 6505, 6510, 6510L,
6510S, 6610, (6200L, 6300L, 6400L, 6500L ALL SN 182761>), (6100, 6200,
6300, 6400, 6506, 6600, SE6100, SE6200, SE6300, SE6400 ALL SN 182761>
(European))

Catalog: Tractor Parts - John Deere

Transcription

Similar documents

Catalog: Tractor Parts - John Deere

friday, march 4, 2016 | 10:00 am