FOR SALE – A complete nostalgia drag racing setup for $40k

FOR SALE – A complete nostalgia drag racing setup for $40k
This is a complete racing package. Just tow it to the track and go racing.
Everything you will need to go down the track is included.
Will pass all tech inspections. All certifications are current.
Front Engine Dragster
RooMan (Keith Burgan) built in 2010
See the build from the first tube to the last paint spray and passes down the track: http://www.lever-familyracing.com/lever-family-racing-home/family-vehicles/2010-front-engine-dragster
Currently running in the NDRL series in an 8.0 index
Strange Rear End, Gun Drilled Axles
IHRA certified Specification 2.2 Professional through 4/23/2016
Torsion front suspension
NHRA certified 6.00 and slower valid through 05/07/2016
Wilwood Brakes
Full body custom hand formed aluminum
Strange steering box
Custom paint job. This dragster has been in shows and won awards. It was
and continues to be used for active racing and the paint has scratches and
pebble dents.
Cold Fire fire suppression system from
D J Safety
RPM Performance Data Collector with sensors for all 8 EGTs, Boost, Fuel Pit stand and Dolly
Pressure, Water Temperature, Oil Pressure, Drive shaft RPM, Engine RPM
New rear tires in 2014
Engine Pontiac
Professionally built by Matt Shaff of Pro-formance Specialties
See multiple rebuilds for more power here: http://www.lever-family-racing.com/lever-family-racing-home/familyvehicles/1978-pontiac-fire-bird/1978-pontiac-firebird-winter-projects-part-2
Engine features include:
400 Pontiac ram air III block 1970
Deck 10.240
Stroke 4.000
Scraper
Kauffman lifter valley brace
Milodon 13900 Timing Gear Drive (Single idler)
Custom Ford Crank Hub from RCD Engineering
Intake
Modified BDS Blower Intake
Ignition
MSD AL6-2 (there are two complete setups)
Crankshaft RPM-455A400C 4340
light weight (70 pounds)
Forged
Nitrated
Custom built Venolia pistons and aluminum rods.
Pistons: 4.155 Bore
.990 Pin/Supply Pins & Spiro Locks
2.200 intake notch/ 1.750 Exhaust notch
15cc Dish Includes Valve Notches
10.5 Comp. for Blown Alcohol
1.605 Compression Distance
Aluminum Rods:
Big Block Chevy Big End and Pin Bore
6.635 Center – Center
-.010 Aluminum
Block is only stock item remaining
Blower
New Littlefield stripped anodized 8-71 blower
Bird Catcher
Injector hat
Engle solid lifter cam
Kauffman heads 74 CC head, 325CFM Port, 2.11/1.77 valve arrangement, Titanium
retainers, H-11 springs and 600 series valves
Mechanical fuel injection (tune-up by Spud Miller, Fuel Injection Enterprise)
Custom aluminum rods and pistons by Venolia
50 runs on this rebuild, new mains and rod bearing installed of the winter for the new
season
New parts not used: Heads, Pistons, Rods, Roller cam.
You would need a new block as I was going to build a short stroke smaller displacement motor to rev higher and
make more use of the blower.
Kauffman heads
High Port
64 CC
2.200 intake, 1.750 exhaust
titanium retainers
10 degree locks
h-11 springs. (Solid roller cam)
380 CFM port work
1200 series Ferrea valves
ARP High Port head stud kit
ARP Rocker arm studs and a girdle
Extra parts:
Moon Front Timing Chain Cover for dual drive for Mag and Pump
Mallory Super III Magneto (rebuilt by Spud Miller)
Solid Roller Copper struck custom grind EX4 intake / EX6 Exhaust
Enderle front Offset dual drive
Engle Roller cam
Additional 25 gallons of fuel fresh this
summer
Transmission
Reid case
PowerGlide Transmission
Built by Rutland Transmission Service, 4415 Spring Stuebner Rd., Spring, TX 77389
See the build here http://www.lever-family-racing.com/lever-family-racing-home/family-vehicles/2010-frontengine-dragster/2010-front-engine-dragster-week-2009-12-26
Trailer
Custom built
60” extended tongue, Eliminator exterior package
Aluminum wheels
Inside is metal lined, custom light fixtures
L shaped lower cabinet with generator storage, Upper cabinets
Metal sheathing on the underside; plywood is not exposed to the
elements
Under coated by Z-Berit
1 ½ inch thick flooring
New brakes: drums, backing plates, shoes, electric brake on all
four wheels
E load rage tires; spare wheel and tire
5000 super winch
A/C
Outside lights
Front storage compartment on the tongue
Honda generator
Yellow top battery, with built-in trickle
charger
Air compressor
5 fuel jugs
Weather Station
Two four foot tables
Two 8 X 8 Quick Shade canopies
25 foot flag pole
Tow vehicle
Big Red Honda three wheeler
This is a complete racing package. Just tow it to the track and go racing.
Everything you will need to go down the track is included.
Will pass all tech inspections. All certifications are current.
Contact: autoshop@rochester.rr.com
585 704 3345