Tractor Loader Backhoe

315SK
(4x4)
Tractor Loader Backhoe
• Net Peak Power: 70 kW
• Net Peak Torque: 384 Nm
• Operating Weight: 2WD - 7 609 kg
4WD - 7 829 kg
WORK PRO - 8 543 kg
Shift Productivity into
a higher gear
Powerful and responsive
hydraulics deliver generous lift
capacity and breakout to both
working ends – along with
impressive backhoe crowd
power and swing torque.
As always, our PowerShift™
transmission provides
smooth on-the-go clutch-less
gear changes. What's more,
a fifth gear makes it even
more nimble and quick,
providing transport speeds
up to 40 km/h. Add
Autoshift, and you'll have
the smoothest-shifting
backhoe available.
Already own our J-Series Backhoes? Loader,
backhoe buckets, as well as front and rear
attachments, are compatible with the
K-Series.
Limited-slip
mechanical-front-wheel
drive delivers up to 65
percent of available power
to the wheel with the best
traction. Engage it "on the
fly", for true all-wheel drive
when and where you
need it.
Ride-control (optional)
functions as a shock
absorber, smoothing
moves over rough terrain.
So full loads are more
likely to arrive at their
destination – instead of
somewhere in-between.
Helps reduce operator
fatigue, too.
2
Redesigned cooling
package allows coolers to
tilt away from the radiator
for convenient core
clean-out.
Extendable dipperstick
(optional) adds digging
depth and reach.
Outer-box design firmly
clamps cumbersome
objects such as timber
and concrete slabs
between the bucket
and gripper teeth while
extending or retracting.
Reduced
maintenance
From the increased bonnet tilt that allows more engine access, to the
tilt-out coolers that open up the cores – the K-Series is loaded with
features that make it as easy to maintain as it is to operate. Same-side
ground-level service points help daily checks and top-ups go more
quickly. Other features such as quick-change filters, extended service
intervals, simple-to-read sight gauges, and easy-access
grease nipples help increase uptime and lower daily operating
costs. And because no maintenance beats low maintenance,
self- adjusting serpentine belts, park brakes, and wet-disc
brakes seldom, if ever, require attention.
With the K-Series, you'll spend
less time and expense
getting ready for
work – and more
time getting work
done.
When you compare routine maintenance costs
you'll discover what owners already know – it
costs less to operate a Bell.
Wet-sleeve engine liners provide uniform cooling
and increased durability over cast-in-block
designs.
Totally welded mainframe resists torsional stress,
absorbs shock loads, and delivers maximum
strength. Simplifies service access to major
components, too.
Planetary final drives distribute loads over
multiple gears for long-term durability.
Wide-mouth fuel tank allows fast, ground-level
fill ups. Large capacity lets you work longer
before refuelling.
Vertical spin-on engine, transmission and
hydraulic filters as well as quick-release fuel
filters allow quick, no-spill changes.
500-hour engine and 2,000-hour hydraulic
oil-service intervals enable K-series Backhoes to
work longer between changes.
Rear axle bearings self-lubricate, so you'll never
have to worry about greasing.
Synthetic bushings in the loader linkage and
extendable dipperstick replace grease nipples
and the greasing that goes with them.
Generous swing-torque, boom, and dipperstick
lift capacity.
Large pins and replaceable bushings deliver
long-term durability, and help keep the backhoe
and loader tight and digging true.
Engine hood is constructed of a resilient
composite material that resists impacts and
damage; reinforced grille helps protect the
coolers.
Tight torque-converter match, impressive
torque reserve, smooth combined-function
metering, and optimum lift-to-crow match make
these aggressive and responsive loaders.
Convenient colour-coded
lube and periodic
maintenance chart
ensures that nothing gets
overlooked.
Curved-knee loader-boom design provides
superior reach, enabling the K-Series to easily
dump to the centre of most trucks. For quick
and efficient loading.
Power Curve™ boom design begins wide at
the base and narrows through the line of sight
for unrestricted visibility. Its proven geometry
provides smooth and consistent control
throughout the digging arc.
Backhoe boom, dipperstick, stabilizers and
loader are box-constructed of low-alloy steel for
maximum strength.
Pallet forks (optional)
increase machine
versatility. The low-profile
loader knee is narrower
through the line of sight,
for a better view of the
attachment. Visibility to
the forks at truck-bed
height is best in class.
Worksite Pro™ quickcoupler (optional) lets
you change attachments
quickly and easily
without leaving your seat.
Accommodates a wide
variety of attachments.
Multi-purpose bucket
(optional) offers even more
versatility for your jobsite.
Wear-resistant alloy-steel
cutting edges on working
areas ensure long life and
trouble-free operation.
3
Big Productivity
begins here
Who wouldn't be more productive in the spacious cab of a K-Series Backhoe?
Its wide expanse of tinted glass provides a virtually unobstructed panoramic view of the work at hand and
surrounding job site. The enhanced automatic high-velocity climate-control system's repositioned vents direct
air more efficiently to keep the view clear and operator comfortable. You will also find
more storage space, with more lockable compartments for securing
carry-ons. And there's a new sealed-switch module that
provides convenient, low-effort push-button operation
of numerous functions including keyless start.
More comfort, more convenience, and more
efficiency – that's our K-Series.
1. Sealed-switch module gives fingertip control of
keyless start, optional ride control, Autoshift and
auxiliary hydraulics – plus many other functions.
Machine-security system with touchpad passcode
helps prevent unauthorized operation.
2. In addition to the
expected cup
holders, there's
more lockable
storage, as well
as plenty of
side-console
and overhead
compartments.
Mechanical armchair
seats adjust as required
for daylong operator
comfort and
support.
3. Advanced monitor provides
a wealth of vital and general
operating info, plus onboard
diagnostics of most sensors
and switches for quick troubleshooting and maximum uptime.
Solid-state electrical system
eliminates numerous relays
and connectors for enhanced
reliability.
4
4. Ergonomically designed loader control
utilizes a rotary-switch-actuated electrohydraulic (EH) controller for third-function loader
hydraulics. Push buttons and a trigger provide
fingertip operation of clutch disconnect, as well as
on/off/momentary front-wheel-drive engagement.
1. You've got cruise control in your
car – why not add it to your
backhoe? Rotary throttle lets you
dial-in the speed you need.
In addition to operating the
backhoe and loader, EH
joysticks provide smooth,
responsive control of auxiliary
loader attachments,
extendable dipperstick,
backhoe auxiliary attachments,
hammer, mechanical-frontwheel drive, and horn.
2. Enabled through the monitor, differential lock
protection prevents engagement at high travel
speeds and the resulting wear and tear on
axle components.
3. To conserve fuel and comply with regional air
and bystander noise regulations, auto-shutdown
turns off the engine after an operator-selected
period of inactivity.
12-volt power ports on both
sides of the console provide
convenient power for cell
phones and other devices.
4. Split floor mats and a large
removable panels provide
convenient, top-side access to
internal components.
5. With convenient handholds,
self-cleaning steps, and wide
doors, getting to work has never
been easier. Separate service and
park brake systems provide an extra
measure of security.
Completely redesigned HVAC system
directs heated or cooled air where
it's needed most – on the operator.
5
315SK Backhoe Loader
ENGINE
Manufacture and Model
John Deere PowerTech™4045T
turbocharged, standard
Non-Road Emission Standards EPA Tier 2 / EU Stage II emissions
Displacement
4,5 L
Net Peak Power (ISO 9249)
70 kW @ 2,000 rpm
Net Peak Torque (ISO 9249) 387 Nm @ 1,300 rpm
Net Torque Rise
45%
Lubrication
Pressure system with spin-on filter & cooler
Air Cleaner
Dual-stage dry type with safety element
and evacuator valve
COOLING
Fan Type
Engine Coolant Rating
Engine Oil Cooler
POWERTRAIN
Transmission
Torque Converter
Maximum Travel Speeds
(with 16.9-28 rear tyres)
Gear 1
Gear 2
Gear 3
Gear 4
Gear 5
Axles: Axle Oscillations,
Stop to Stop, Front axles
Axle Ratings
Static
Dynamic
Ultimate
Differentials
MFWD Axle
Rear Axle
Steering (ISO 5010)
Axle Type
Curb-Turning Radius
With Brakes
Without Brakes
Bucket Clearance Circle
With Brakes
Without Brakes
Steering Wheel Turns
(lock to lock)
Final Drives
Mechanical-Front Wheel
Rear Axle
Brakes (SAE J1473)
Service
Parking
HYDRAULICS
Main Pump
Pump Flow @ 2,200 rpm
Backhoe
Loader
System Relief Pressure
Backhoe
Loader
Backhoe Controls
Loader Controls
6
Suction
-40˚C
Oil to water
5-speed, helical-cut gears, full PowerShift™
transmission with hydraulic reverser
standard; electric clutch cutoff on loader
lever
Single stage, dual phase with 2.631:1
stall ratio, 280 mm
Forward
5,9 km/h
10,8 km/h
22,1 km/h
34,7 km/h
40,0 km/h
22 deg.
MFWD
12 000 kg
6 000 kg
28 200 kg
Reverse
7,4 km/h
13,6 km/h
21,8 km/h
N/A
N/A
Non-powered
18 000 kg
7 200 kg
32 950 kg
3,44 m
3,94 m
10,11 m
11,05 m
9,89 m
10,76 m
2.7
3.2
Loader Boom, (2)
Loader Bucket (1)
Backhoe Boom (1)
Backhoe Crowd (1)
Backhoe Bucket (1)
Heavy-Duty Option (1)
Backhoe Swing (2)
Backhoe Extendable
Dipperstick (1)
Backhoe Stabiliser Standard (2)
Non-Powered Axle (1)
Mechanical-Front-Wheel Drive (1)
ELECTRICAL
Voltage
Alternator Rating
Lights
Heat-treated, chrome-plated, polished
rods; hardened-steel (replaceable
bushings) pivot pins
Bore
Rod
Stroke
Diameter
80 mm 50 mm 790 mm
90 mm 50 mm 744 mm
120 mm 56 mm 795 mm
115 mm 63 mm 622 mm
90 mm 56 mm 810 mm
100 mm 63 mm 810 mm
90 mm 50 mm 278 mm
70 mm
70 mm
70 mm
67 mm
40 mm 1067 mm
45 mm 716 mm
42 mm 213 mm
42 mm 210 mm
12 volt
90 amp
6 halogen, 2 front,2 rear and 2 side
docking (32, 500 candlepower each),
turn signals and flashers, 2 front and 2
rear, stop and taillights and 2 rear
reflectors.
OPERATOR STATION
Type (SAE J1040)
Cab, isolation mounted, ROPS / FOPS,
left/right access, with molded roof.
Airconditioner (optional).
Rear
13 000 kg
7 000 kg
30 600 kg
Automatic, limited slip traction control
Electric,foot-actuated, 100% hydraulical
locking
Hydrostatic power and emergency steering
MFWD
Non-powered
3,58 m
4,08 m
CYLINDERS
Type
Heavy-duty, outboard planetary final drives
distribute shock loads over 3 gears
Heavy-duty, outboard planetary final drives
distribute shock loads over 4 gears
Power assisted, hydraulic wet disc,
mounted inboard, self-adjusting and
self-equalising
Spring-applied, hydraulically released, wet,
multi disc, independent of service brakes
with electric switch control
Open center, gear type, tandem with
unloader
136 L/min
106 L/min
24 993 kPa
24 993 kPa
Two-lever manual standard; manual and/or
electric auxiliary functions optional
Single-lever control with electric clutch cutoff switch standard; manual auxiliary
functions (electro-hydraulic control lever)
optional
OVERALL VEHICLE
Mainframe
Unitised one-piece construction
TYRES
Front
Non-Powered Front Axle
11L-16 SL F-3 (12)
Mechanical-Front-Wheel Drive 12.5/80-18 I-3 (10)
Heavy Duty MFWD
12.5/80-18 AT (12)
Rear
Non-Powered Front Axle
16.9-28 R-4 (10)
Mechanical-Front-Wheel Drive 16.9-28 R-4 (10)
Heavy Duty MFWD
17.5-25 L4 (12)
SERVICEABILITY
Hydraulic Oil Filter, Spin-On
Enclosed Replaceable Element 6-micron filtration
REFILL CAPACITIES
Cooling System
Rear Axle
Engine Oil
(including vertical spin-on filter)
Torque Converter and Transmission
Fuel Tank
(with ground-level fueling)
Hydraulic System
Hydraulic Reservoir
Mechanical-Front-Wheel-Drive
Housing
Axle
Planetary (each)
32,9 L
18 L
13 L
15,1 L
155,2 L
89,3 L
37,1 L
6,5 L
0,9 L
OPERATING WEIGHTS
With Full Fuel Tank, 79 kg
Operator, and Standard
Equipment
• 2WD
7 609 kg
• 4WD
7 829 kg
• WORK PRO
8 543 kg
OPTIONS
Extendable Dipperstick
Front Loader Coupler
Backhoe Bucket Coupler
222 kg
286 kg
63 kg
Specifications
OVERALL DIMENSIONS
A
B
C
D
E
BACKHOE DIMENSIONS/PERFORMANCE
Backhoe specifications are with 610 mm x 0.21 m3 bucket
351 mm
5,26 m
2,4 m
3,48 m
Ground Clearance (minimum)
Overall Length (transport)
Stabiliser Spread
Height to Top of ROPS/Cab0
Length from Axle to Axle
Non-Powered Front axle
Mechanical-Front-Wheel-Drive Axle
2,11 m
2,14 m
LOADER DIMENSIONS/PERFORMANCE
P
Q
45 deg.
40 deg.
Bucket Dump Angle (maximum)
Rollback Angle at Ground
Bucket Capacity
Width
Weight
Breakout Force
Lift Capacity (full height)
R Height to Bucket Hinge Pin
(maximum)
S Dump Clearance
(bucket at 45 deg.)
T Reach at Full Height
(bucket at 45 deg.)
U Digging Depth Below
Ground (bucket level)
V Length From Front Axle
Centreline to Bucket
Cutting Edge
F
Heavy-Duty
1,00 m3
2 400 mm
552 kg
45,8 kN
3 266 kg
3,40 m
Multipurpose
1,00 m3
2337 mm
816 kg
42,9 kN
2994 kg
3,40 m
2,64 m
2,62 m
765 mm
818 mm
K
206 mm
185 mm
L
2,03 m
2,15 m
315SJ
315SJ
315SK
Backhoe
Backhoe
Backhoe
with
with
with
Standard
Standard
Standard
Dipperstick
Dipperstick
Dipperstick
1699
1699
1699
1659
1659
2569
2569
2569 1659
1604
1604
2624)
2624)
2624) 1604
H
I
J
M
N
O
1545
1545
1545
2998
2998
2998DIPPER
DIPPER
DIPPER
LIFT
LIFT
1486
1486
5166
5166
5166 LIFT
WITH
WITH
WITH 1486
BOOM
BOOM
BOOM
1431
1431
AT AT
65°AT
65°65° 1431
1381
1381
1381
SWING
SWING
PIVOT
PIVOT
SWING
PIVOT
1336
1336
1336
BOOM
BOOM
BOOM
LIFT
LIFT
LIFT
1295
1295
1295
1616 5 5 5
555
16 16
444
444
12 12
88
44
1235
1235
1235
FEET
FEET
METERS
METERS
METERS
2591
2591
2591
3780
3780
3780
111
1212
00
44
88
1212 1616 2020
000 111 222 333 444 555 666 777
1415
1415
1415
1383
1383
1383
1342
1342
1342
DIPPER
DIPPER
DIPPER
LIFT
LIFT
LIFT
WITH
WITH
WITH
BOOM
BOOM
BOOM
AT AT
65°AT
65°65°
SWING
SWING
SWING
PIVOT
PIVOT
PIVOT
44 111
88
1415
1415
1415
2259
2259
2259
2303
2303
2303
222
00 000
1261
1261
1261
1239
1239
1239
1989
1989
1989
333
1298
1298
1298
1217
1217
1217
1150
1150
1150
1117
1117
1117
1140
1140
1140
1500
1500
1500
444
FEETFEET
METERS
METERS
METERS
With Optional
Extendable Dipperstick
Retracted
Extended
3,58 m
4,34 m
5,51 m
5,61 m
6,63 m
6,91 m
7,01 m
8,03 m
4,29 m
4,42 m
5,49 m
4,27 m
3,96 m
2,49 m
4,40 m
4,09 m
2,49 m
5,44 m
5,22 m
-
542 mm
542 mm
542 mm
620 mm
190 deg.
3,48 m
620 mm
190 deg.
3,48 m
620 mm
190 deg.
3,48 m
315SK
315SJ
315SJ
Backhoe
Backhoe
Backhoe
with
with
with
1.07
1.07
1.07
mmExtendable
mExtendable
Extendable
Dipperstick,
Dipperstick,
Dipperstick,
Extended
Extended
Extended
555
1616
4
111
0
00 0 0
4
41 1 1
8
222
8
333
1335
1335
1335 997997997
1431
1431
1431
992992992
979979979
1530
1530
1530
DIPPER
DIPPER
DIPPER
44
111
0 00 0 0
918918918
906906
BOOM
BOOM
BOOM906
LIFT
LIFT
LIFT
896896896
894894894
902902902
933933933
FEET
FEET
333
88
222
931931931
AT AT
65°AT
65°65°
SWING
SWING
SWING
PIVOT
PIVOT
PIVOT
METERS
METERS
METERS
444
1212
1674
1674
1674 LIFTLIFTLIFT 965965965
WITH
WITH
WITH
949949
BOOM
BOOM
BOOM 949
1991
1991
1991
12 12
444
0 0 4 4 8 8 12 12 16 16 20 20
000 111 222 333 444 555 666 777
991991991
1213
1213
1213
333
8
222
4
1257
1257
1257
1127
1127
1127
333
8
1182
1182
1182
BOOM
BOOM
BOOM
LIFT
LIFT
LIFT
222
53,3 kN
67,8 kN
36,0 kN
180 deg.
Two levers
With Standard
Dipperstick
Backhoe
3,58 m
Lift capacities are over-end values in kg according to SAE J31.
Figures listed are 87% of the maximum lift force available. Base
vehicle includes counterweight.
315SJ
315SK
315SJ
Backhoe
Backhoe
Backhoe
with
with
with
1.07
1.07
1.07
mmExtendable
mExtendable
Extendable
Dipperstick,
Dipperstick,
Dipperstick,
Retracted
Retracted
Retracted
1212
Loading Height
(truck loading position)
Reach from Centre of
Swing Pivot
Reach from Centre of
Rear Axle
Digging Depth
(SAE maximum)
Digging Depth (SAE)
610 mm Flat Bottom
2440 mm Flat Bottom
Overall Width
(less loader bucket)
Side-Shift from
Centreline
Wall-to-Swing Centreline
Bucket Rotation
Transport Height
G
LIFT CAPACITY WITH QUICK-COUPLER/FORKS
2073 kg
A1 Maximum Height
3162 kg
B1 Maximum Reach
4145 kg
C1 At Ground Line
211 mm
D1 Below Ground Line
2533
2533
2533
305-915 mm
Bucket Range
Digging Force
Bucket Cylinder
With Heavy-Duty Cylinder Option
Crowd Cylinder
Swing Arc
Operator Control
4 41 1 1
222
88
333
1212
444
200
4
8
12
16
20
000 111 222 333 444 555 666 777
7
Features and Options
Powertrain
● Powershift transmission: Torque converter
with Transmission Control Lever (TCL)
twist grip F-N-R, with neutral safety switch
interlock (1 through 4 gears)
● 5th gear over-drive
● Transmission oil cooler
● Vertical spin-on transmission filter
● Differential lock, electric foot-actuated
● Planetary final drives
● Power assisted hydraulic service brakes
(conform to ISO 3450): Inboard, wet
multi-disc, self-adjusting and self
equalising
● Parking/emergency brake with electric
switch control (conforms to ISO 3450):
Spring applied, hydraulically released wet
multi-disc / Independent of service brakes
● Hydrostatic power steering with
emergency manual mode
▲ Non-powered front axle
● Mechanical-front-wheel-drive with traction
control limited-slip differential: Electric
on/off control / Driveshaft guard / Sealed
axle
▲ Autoshift transmission
Backhoe
● Standard dipperstick, 4.29 m digging
depth
▲ Extendable dipperstick, 1.07 m extension
▲ Heavy-duty backhoe bucket cylinder
● Two-lever mechanical backhoe controls
● Backhoe transport lock lever
● Swing lock pin stored in operator’s station
● Stabilisers with two-direction anti-drift
valves
● Heavy-duty backhoe bucket
▲ Auxiliary backhoe valve for hammers,
compactors with auxiliary plumbing
Loader
● Loader bucket anti-spill (rollback)
● Return-to-dig feature
● Single-lever control with electric clutch
cut-off switch
● Bucket-level indicator
● Loader boom service lock
▲ Ride control
▲ Auxiliary loader hydraulics
▲ Front loader hydraulic coupler for buckets,
forks, etc.
● High-visibilty loader arms
Hydraulic System
● 136 L/min tandem gear pump,
open-centre system
● Independent hydraulic reservoir
● “O”-ring face seal connectors
● 6-micron vertical spin-on filter
Electrical System
● 12 volt system
● 90 amp alternator
● Single battery with 190 min reserve
capacity and 950 CCA
● Positive terminal battery cover
● Blade-type multi-fused circuits
● By-pass start safety cover on starter
● Battery disconnect switch
Lights
● Halogen work lights (6), 32 500
candlepower each (2 front, 2 rear, and
2 side docking)
● Turn signal/flashing (2 front and 2 rear)
● Rear stop and tail (2)
● Rear reflectors (2)
▲ Additional halogen work lights (4), 2 front
and 2 rear
●
●
●
●
●
●
▲
●
●
▲
Engine coolant temperature guage,
illuminated electronic, with audible
warning
Oil temperature guage, illuminated
electronic, with audible warning
Fuel guage, illuminated electronic
Digital display of engine hours, engine
rpm, and system voltage
Monitor system with audible and visual
warnings: Engine air restriction / Low
alternator voltage / Engine oil pressure /
Hydraulic filter restriction / Parking brake
on/off / Seat belt / Low brake pressure /
Machine diagnostic information via
4-pushbutton / LCD operator interface
Mechanical suspension deluxe fabric
swivel seat with lumbar adjustment and
armrests (fully adjustable)
Air suspension deluxe fabric swivel seat
with lumbar adjustment
Seat belt, 76 mm, with retractor
Cab: Headliner, dome light, left and right
cab doors, tinted safety glass, windshield
wiper (one rear and one front), front
windshield washer, fresh-air intake, heater
/ defroster / pressuriser (40,000 Btu/hr.
[11.7kW] heater), and 12 volt outlets (2)
Air conditioner (26,000 Btu/hr. [7.6kW]
output and CFC-free R134a refrigerant)
Overall Vehicle
● One-piece unitised construction
mainframe
● Vehicle tie-downs (2 front and 2 rear)
● Remote grease bank for front axle
● 204 kg front counterweight
● Heavy duty front bumper
▲ Rubber grille bumpers
● Fuel tank, 155 L, ground-level fueling
● Two-position easy tilt hood
● Extended grille frame
● Removable toolbox with padlock latch
● Vandal protection for locking, engine
hood, toolbox, hydraulic reservoir, and fuel
tank
● Reverse warning alarm
▲ Sound reduction package
● Dent-resistant full-coverage rear fenders
Operator’s Station
● Modular-design ROPS/FOPS level 2, cab
with molded roof (conforms to SAE
J1040): Isolation mounted
● Left and right access
● Slip-resistant steps and ergonomically
located handholds (conform to SAE J185)
● Molded floor mats
● Headliner
● Coat hook
● 12 volt outlets - 2 in cab
● Built-in beverage holders
● Built-in Operator’s Manual storage
compartment
● Interior rearview mirror
● 2 outside rearview mirrors
● Rotary-dial hand throttle
● Suspended foot throttle
● Horn
● Sealed switch module
● Keyless start
● Machine security (enabled through
monitor)
● Standard Equipment ▲ Optional Equipment
All dimensions are shown in millimetres, unless otherwise stated between brackets. Under our policy of continuous
improvement, we reserve the right to change specifications and design without prior notice.
Photographs featured in this brochure may include optional equipment.
BELL INTERNATIONAL: Tel: +27 (0) 35-907 9431
E-mail: marketing@bellequipment.com
Web: www.bellequipment.com
Tel: +61 (0) 8-9356-1033
Tel: +49 (0) 6631 / 91-13-0
Tel: +27 (0) 11-928-9700
Tel: +44 (0) 1283-712862
Tel: +33 (0) 5-55-89-23-56
Tel: +7 495-287-80-02
Tel: +34-91-879-60-19
Tel: +1-855-494-2355
Broch/1459/11/13 - 315SK TLB Brochure
Engine
● Meets EPA Tier 2 / EU Stage II emissions
● John Deere Model 4045T - 4.5 litre, net
peak power (70 kW) turbocharged,
isolation mounted
● Vertical spin-on engine oil filter
● Vertical spin-on fuel filter with water
separator
● 2 micron Ultra Fine Diesel Filter
● Oil-to-water engine oil cooler
● Antifreeze, -40˚C
● Coolant recovery tank
● Serpentine belt with automatic belt
tensioner
● Suction-type cooling fan
● Enclosed safety fan guard
● High ambient temperature engine cooling
● Dual-element dry-type air cleaner
● Muffler, under hood with curved-end
exhaust stack
● Mechanical fuel lift pump