Concrete Saws - Professional

Concrete Saws Professional
MK-4000 Series
1315 Storm Parkway
Torrance, CA 90501
P 800.421.5830
F 310.539.5158
www.mkdiamond.com
customerservice@mkdiamond.com
twitter.com/MKDiamond
facebook.com/mkdiamondproducts
MK-4000 Series SELF-PROPELLED CONCRETE SAWS
The MK-4000 Professional Series is designed for operator comfort, safety and efficiency. Environmentally
friendly with low emissions and meets EPA Interim Tier IV and CARB requirements. Saw is designed for left
or right mounting of blade and blade guard. Travel speed; 0 - 220 FPM forward, 0 - 100 FPM reverse.
MADE IN USA
Standard Features:
Control Panel
Easy Access
Instruments are positioned for better visibility, quick access and
ease of operation. Control set provides proportional blade raising/lowering and travel speed with one hand operation.
Removable rear and side panels for easy accessibility for service and preventive
maintenance.
Engine Power
Water Delivery
Blade Guard
Blade guard uses"ride on the blade"
water tubes for superior water
delivery and blade cooling.
Quick, release, auto-latching
bayonet mount blade guard.
Balanced Design
Blade Shaft
Superb balance that minimizes user
fatigue while increasing maneuverability and providing straight line
tracking during cutting.
Removable blade shaft stub for easy
maintenance. Totally enclosed and
sealed blade shaft with continuous
oil bath lubrication system.
The MK-4000 Professional Series is available with a Hyundai 48
Hp gas engine or Kubota 44 Hp diesel engine. The saws feature
a three stage dual element radial seal air filter that protects the
engine and delivers long filter life.
Optional: Meco Spade available
to allow for use of old style Meco
guards.
http://zenithpp.com/engines.htm
The 48Hp Hyundai 416 is a 4 cylinder in-line, DOHC, gasoline
fueled, spark-ignited, liquid-cooled engine. It is computer-controlled, fuel efficient, multi-port fuel injected, has low emissions
and meets all EPA and CARB requirements. The engine utilizes
a check engine light to provide diagnostic codes through a
connector. This engine is 1599cc in displacement with a 10.1 to
1 compression ratio. This engine has an EPA certified catalytic
converter.
®
www.kubotaengine.com
The 44Hp Kubota V1505-T-E3B is a 4 cylinder in-line, diesel
fueled, turbo-charged, liquid-cooled engine. It is fuel efficient,
altitude compensating, has low emissions and meets all EPA and
CARB requirements. The engine is 1498cc in displacement and
features Kubota’s Three Vortec Combustion system, which produces an ideal air/fuel mixture that provides increased combustion efficiency and cleaner exhaust.
www.mkdiamond.com
Standard Features:
Axle
Lifting Bail
Built-in lifting bail for easy maneuverability.
Axle is designed for smooth
transition in and out of cuts.
Differential Drive System
Transmission
Provides positive drive to both
rear wheels for maximum traction
when cutting on slippery surfaces
and free/engage controls to allow
the saw to be pushed manually.
Eaton model 6 hydrostatic
transmission coupled to an MK
differentiating trans-axle provides
continuous variable forward/
reverse travel and cutting motion.
Maneuverability
Designed for both front and rear pivoting allowing for ease of
movement and control. Three-position adjustable solid steel
handlebars are ergonomically designed; they adjust to
comfortably accommodate the operator.
Accurate Tracking
Rigid frame pointer with high visibility guide wheel for
accurate tracking.
3-speed Series Features:
The 3-speed blade shaft gearbox allows for multiple
blade diameters without belt/pulley changes reducing labor time. Located at the front of the saw for easy access,
the gearbox is used to change output speed of the blade
shaft. Blade capacity available from 12" to 36".
The 3-Speed Series offers the widest range of blade
sizes, without pulley changes, of any saw available on
the market.
Gear Box Models
MK-4020, MK-4026, MK-4030, MK-4036
Selected Gear
Blade Diameter/Blade Guard
RPM
High
12" - 16"
3000
Medium
18" - 24"
2000
Low
26" - 36"
1300
Gearbox
Gear Shift
Belts
is watercooled for
longevity
and long
maintenance
intervals.
Gearbox
shift lever
locks in
place.
One 7 rib
powerband
from engine
to gearbox.
1.800.421.5830 TO ORDER
Specifications kubota:
MK-4020KB
MK-4026KB
MK-4030KB
MK-4036KB
Part #
167420-20
167420-26
167420-30
167420-36
Blade Guard Capacity
20"
26" (660mm)
30" (762mm)
36" (914mm)
Max. Depth of Cut
7-1/2" (191mm)
10-1/2" (267mm)
12-1/2" (318mm)
15" (381mm)
Blade Flange Diameter
4" (102mm)
5" (127mm)
5" (127mm)
6" (152mm)
Blade Shaft RPM
2,200
1,900
1,650
1,350
Arbor Size
1" (25mm)
1" (25mm)
1" (25mm)
1" (25mm)
Part #
167420-20G
167420-26G
167420-30G
167420-36G
Blade Guard Capacity
20"
26" (660mm)
30" (762mm)
36" (914mm)
Max. Depth of Cut
7-1/2" (191mm)
10-1/2" (267mm)
12-1/2" (318mm)
15" (381mm)
Blade Flange Diameter
4" (102mm)
5" (127mm)
5" (127mm)
6" (152mm)
Blade Shaft RPM
1300/2000/3000
1300/2000/3000
1300/2000/3000
1300/2000/3000
Arbor Size with 3/8" Drive Pin
1" (25mm)
1" (25mm)
1" (25mm)
1" (25mm)
Blade Shaft Diameter
1-5/8" (41mm)
Blade Shaft Bearings
Oil Bath
Blade Shaft Drive
One Seven Rib Powerband
Blade Guard Attachment
Quick Detach Bayonet
Blade Control
Electro-Hydraulic
Axle - Front
1" (25mm)
Axle - Rear
1" (25mm)
Wheels - Front
6" x 2-1/2" x 1" (152 x 64 x 25mm)
Wheels - Rear
10" x 3" x 1" (254 x 77 x 25mm)
Handle Bars/Adjustment Length
32-1/2" (826mm)
Transmission
Eaton Hydrostatic
Rear End/Differential
Differential
Control
Forward/Reverse Control, Engage/Disengaged Controls and Differential Lock
Speed
0-222 FPM (Forward) 0-100 FPM (Reverse)
Chassis
Heavy Duty jig-welded box frame
Power Source
Diesel Turbo Charged
Engine Type
Kubota
Specifications
V1505-T-E3B-KEA-1
Maximum Horsepower*
44Hp (32.8kw)
Displacement
91.4 cu in. (1,4498.1cc)
Bore
3.07" (78mm)
Stroke
3.09" (78.4mm)
Cylinders
4 Cylinder
Fuel Capacity
6 Gal (23 liter)
Oil Capacity
7.08 Qt. (6.7 liter)
Air Filter
Three Stage Dual Element Radial Seal
Starter
Electric
Engine Cooling
Liquid
TECHNICAL SPECIFICATIONS
MK-4020KBG
MK-4026KBG
MK-4030KBG
MK-4036KBG
*Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. MK Diamond Products makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to
consult the engine manufacturer’s owners manual and website for specific information regarding the engine power rating.
www.mkdiamond.com
Specifications Hyundai:
MK-4020HY
MK-4026HY
MK-4030HY
MK-4036HY
Part #
167196-20
167196-26
167196-30
167196-36
Blade Guard Capacity
20" (508mm)
26" (660mm)
30" (762mm)
36" (914mm)
Max. Depth of Cut
7-1/2" (191mm)
10-1/2" (267mm)
12-1/2" (318mm)
15" (381mm)
Blade Flange Diameter
4" (102mm)
5" (127mm)
5" (127mm)
6" (152mm)
Blade Shaft RPM
2,200
1,900
1,650
1,350
Arbor Size
1" (25mm)
1" (25mm)
1" (25mm)
1" (25mm)
TECHNICAL SPECIFICATIONS
Blade Shaft Diameter
1-5/8" (41mm)
Blade Shaft Bearings
Oil Bath
Blade Shaft Drive
One Seven Rib Powerband
Blade Guard Attachment
Quick Detach Bayonet
Blade Control
Electro-Hydraulic
Axle - Front
1" (25mm)
Axle - Rear
1" (25mm)
Wheels - Front
6" x 2-1/2" x 1" (254 x 64 x 25mm)
Wheels - Rear
10" x 3" x 1" (254 x 77 x 25mm)
Handle Bars/Adjustment Length
32-1/2" (826mm)
Transmission
Eaton Hydrostatic
Rear End/Differential
Differential
Control
Forward/Reverse Control, Engage/Disengaged Controls and Differential Lock
Speed
0-222 FPM (Forward) 0-100 FPM (Reverse)
Chassis
Heavy Duty jig-welded box frame
Power Source
Gasoline Multi-Port Fuel Injection
Engine Type
Hyundai
Specifications
ZPP-416
Maximum Horsepower*
48Hp (35.8kw)
Displacement
97.6 cu in. (1,599.1cc)
Bore
3.01" (76.5mm)
Stroke
3.43" (87.0mm)
Cylinders
4 Cylinder
Fuel Capacity
6 Gal (23 liter)
Oil Capacity
3.9 Qt. (3.7 liter)
Air Filter
Three Stage Dual Element Radial Seal
Starter
Electric
Engine Cooling
Liquid
*Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. MK Diamond Products makes no claim, representation or warranty as to
the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine
manufacturer’s owners manual and website for specific information regarding the engine power rating.
1.800.421.5830 TO ORDER
electric
Made in
the USA
Control Panel
Front & Rear Pivot
Baldor Motor
MK-4000 Pro Electric Series Self-Propelled Concrete Saws
The MK-4000 Electric Saw provides a solution for those environments and situations where electric power is the right choice,
whether for indoor use or simply operator preference. The saw utilizes a three-phase, 30 Hp, Baldor 460V electric motor. The
saw features the same hydraulic raise/lower system, self-propelled transmission and control set as other MK-4000s. The saw
has an on-board battery to provide 12VDC power for raise/lower function when the saw is not plugged in, and has a transformer/battery charger to recharge the system automatically anytime the saw is connected to power. The saw can also be
plugged into 120VAC to recharge or maintain the battery when the saw is not in use. An ammeter is provided to help monitor load when cutting. One-year limited warranty.
Switch
IP 65 IEC across the line starter
Travel Speed
0-220 FPM Forward, 0-100 FPM Reverse
L x W x H (inches)
L x W x H (mm)
64" x 35" x 47"
Motor
Baldor (Electric)
Weight
1250 lbs. (567kg)
1,626 x 889 x 1,194mm
Model
MK-4020B
MK-4026B
MK-4030B
MK-4036B
Blade Capacity
20" (508mm)
26" (660mm)
30" (762mm)
36" (916mm)
Power
30 Hp 460V 3 Ph
30 Hp 460V 3 Ph
30 Hp 460V 3 Ph
30 Hp 460V 3 Ph
Blade RPM
2,240
1,760
1,760
1,400
Depth of Cut
7-1/2" (191mm)
10-1/2" (267mm)
12-1/2" (318mm)
15" (381mm)
Part#
167439-20
167439-26
167439-30
167439-36
Blade not included
www.mkdiamond.com
MK-Pro
series Professional
grade diamond
MK-Pro Series
Professional
Grade Diamond
Blades blades
The MK-Pro Series is designed and engineered for use on high horsepower, flat saws. This Professional Series is for contractors who
insist on optimal performance.
Cured Concrete*
hard aggregate
/non-abrasive
Horsepower Range
Rim Height
Diameter
12”
12”
12”
14”
14”
14”
14”
14”
16”
18”
18”
18”
20”
20”
24”
24”
24”
26”
26”
26”
30”
30”
30”
36”
36”
36”
42”
42”
medium-hard
aggregate
soft aggregate
/abrasive sand
hard aggregate
asphalt overlay
Asphalt****
soft aggregate
MK-7501
35 - 72
14mm
MK-7502
35 - 72
14mm
MK-7503
35 - 72
14mm
MK-7601W
35 - 72
12mm
MK-7625
35 - 72
12mm
MK-7710W
35 - 72
12mm
Arbor
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
153968
169784
169787
152603
169790
169794
169796
169799
152534
152738
154670
169803
153190
169806
169809
153305
161124
154079
169823
158491
169830
154080
169836
161125
169844
169848
169853
169858
152240
169785
169788
151504
169791
154083
169797
169800
153974
152237
154085
154086
153841
154087
169810
152372
169815
169819
153299
169826
154089
169834
169837
169841
169845
169849
169854
169859
152154
169786
169789
153972
169792
154092
169798
169801
169805
153980
154094
169804
153984
169807
169811
153990
169816
169820
154095
169827
169831
169835
169838
169842
169846
169850
169855
169860
153187
154096
154097
153867
154098
169812
154099
152774
169817
153981
154100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
153971
154131
154132
153356
169793
169795
154135
169802
153978
153289
152418
153593
153988
169808
169813
169814
169818
169822
169825
169829
169833
153374
169840
153750
153563
169852
169857
169862
153562
169867
169868
152602
153586
169869
169870
169871
153979
153222
155131
153300
153989
169872
153995
169873
169874
169875
169876
169877
169878
157827
169879
169880
169847
169851
169856
169861
.165
.187
.165
.187
.250
.187
.250
.187
.220
1”
1”
1”
1”
1”
1”
1”
1”
1”
12mm
169881
169887
169893
169899
169905
169911
169917
169923
169929
12mm
169882
169888
169894
169900
169906
169912
169918
169924
169930
12mm
169883
169889
169895
169901
169907
169913
169919
169925
169931
10mm
•
•
•
•
•
•
•
•
•
10mm
169885
169891
169897
169903
169909
169915
169921
169927
169933
10mm
169886
169892
169898
169904
169910
169916
169922
169928
169934
MK-7501-30
MK-7502-40
169884
169890
169896
169902
169908
169914
169920
169926
169932
169940
169941
169942
Segment width
(inches)
.125-.187
.220-.250
169943
169944
26”
26”
30”
30”
30”
36”
36”
42”
42”
12”
12”
12”
14”
14”
14”
Joint Widening Blades - Cured Concrete
(305mm)
.187
1”
(305mm)
.220
1”
(305mm)
.250
1”
(356mm)
.187
1”
(356mm)
.220
1”
(356mm)
.250
1”
Joint widening blades do not have undercut protection
Joint Widening Spacer Size
(203mm)
(203mm)
Asphalt/Concrete***
Width
.125
.145
.187
.125
.145
.155
.187
.250
.125
.125
.155
.187
.125
.155
.145
.155
.187
.155
.165
.187
.165
.187
.250
.187
.210
.250
.187
.220
(305mm)
(305mm)
(305mm)
(356mm)
(356mm)
(356mm)
(356mm)
(356mm)
(406mm)
(457mm)
(457mm)
(457mm)
(508mm)
(508mm)
(610mm)
(610mm)
(610mm)
(660mm)
(660mm)
(660mm)
(762mm)
(762mm)
(762mm)
(914mm)
(914mm)
(914mm)
(1067mm)
(1067mm)
Wide Notch Core
Rim Height
(660mm)
(660mm)
(762mm)
(762mm)
(762mm)
(914mm)
(914mm)
(1067mm)
(1067mm)
8”
8”
Green Concrete**
.032
.064
1”
1”
*Cured Concrete Blades
All blades 14” in diameter or larger have vertical
insert undercut protection.
**Green Concrete Blade
All blades 14” to 26” in diameter have trapezoid
undercut protection.
***Asphalt Overlay Blades All blades 14” to 26” in diameter have trapezoid
undercut protection.
****Asphalt Blades
All Wide Notch blades have vertical insert
undercut protection.
Part #
1.800.421.5830 TO ORDER
4000 SERIES
Models
Part Number
MK-4020B 20", 30Hp Baldor Electric Self-Propelled Saw 460V 3 Phase
167439-20
MK-4030B 30", 30Hp Baldor Electric Self-Propelled Saw 460V 3 Phase
167439-30
MK-4026B 26", 30Hp Baldor Electric Self-Propelled Saw 460V 3 Phase
167439-26
MK-4036B 36", 30Hp Baldor Electric Self-Propelled Saw 460V 3 Phase
167439-36
MK-4020KB 20", 44Hp Kubota Diesel Self-Propelled Concrete Saw
167420-20
MK-4026KB 26", 44Hp Kubota Diesel Self-Propelled Concrete Saw
167420-26
MK-4030KB 30", 44Hp Kubota Diesel Self-Propelled Concrete Saw
167420-30
MK-4036KB 36", 44Hp Kubota Diesel Self-Propelled Concrete Saw
167420-36
MK-4020KBG 20", 44Hp Kubota Diesel 3 - Speed Gear Box
167420-20G
MK-4026KBG 26", 44Hp Kubota Diesel 3 - Speed Gear Box
167420-26G
MK-4030KBG 30", 44Hp Kubota Diesel 3 - Speed Gear Box
167420-30G
MK-4036KBG 36", 44Hp Kubota Diesel 3 - Speed Gear Box
167420-36G
MK-4020HY 20", 48Hp Hyundai Gas Self-Propelled Concrete Saw
167196-20
MK-4026HY 26", 48Hp Hyundai Gas Self-Propelled Concrete Saw
167196-26
MK-4030HY 30", 48Hp Hyundai Gas Self-Propelled Concrete Saw
167196-30
MK-4036HY 36", 48Hp Hyundai Gas Self-Propelled Concrete Saw
167196-36
Saw Dimensions
Height
47" (1,194mm)
Wheel Base Length
16-1/2" (419mm)
Minimum Saw Length (Transport)
64-1/4" (1,632mm)
Blade Shaft Maximum Height
20-5/8" (524mm)
Maximum Saw Length (Working)
107-1/2" (2,731mm)
Weight Crated
Maximum Pointer Length
21-1/4" (540mm)
Frame Width
27" (686mm)
Saw Width
34-3/4" (863mm)
Front (Outside to Outside Wheel Width)
17" (432mm)
Rear (Outside to Outside Wheel Width)
27-1/2" (686mm)
Blade to Wall
2-1/4" (57mm)
• Kubota
• Hyundai
1,180lbs (536kg)
1,220lbs (555kg)
Weight Uncrated
• Kubota
• Hyundai
1,080lbs (490kg)
1,120lbs (510kg)
Quality & Performance
MK Diamond Products has been in the
construction manufacturing business for over
a century and has built a reputation for quality
products. With over three decades being
focused on the manufacturing of saws, our
engineering staff has designed some products
and features that have become standards in the
industry. Quality is a must when it comes to the
precision necessary to build large flat saws. All
MK-4000 Series are made in our state of the art
facility, in Torrance, California.
www.mkdiamond.com
© 2016 MK Diamond Products, Inc. All Rights Reserved. Images, prices and specifications are subject to change without notice.
Baldor, Kubota, Hyundai, Meco/Husqvarna are registered trademarks, not affiliated with MK Diamond Products, Inc. Part # AP080112 MK-4000 Series (03/16)